From 990d5189d19341cb768ea39a5510f381f1522e20 Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 29 Nov 2020 10:28:03 -0600 Subject: [PATCH 001/145] Configurable serial usart timeout (#11057) --- docs/serial_driver.md | 1 + drivers/chibios/serial_usart.c | 13 ++++++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/docs/serial_driver.md b/docs/serial_driver.md index bc376b6ddda..c98f4c11763 100644 --- a/docs/serial_driver.md +++ b/docs/serial_driver.md @@ -60,6 +60,7 @@ Configure the hardware via your config.h: // 5: about 19200 baud #define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 ``` You must also enable the ChibiOS `SERIAL` feature: diff --git a/drivers/chibios/serial_usart.c b/drivers/chibios/serial_usart.c index 62b4913cbfb..72fcaed0c7c 100644 --- a/drivers/chibios/serial_usart.c +++ b/drivers/chibios/serial_usart.c @@ -58,7 +58,10 @@ # error invalid SELECT_SOFT_SERIAL_SPEED value #endif -#define TIMEOUT 100 +#ifndef SERIAL_USART_TIMEOUT +# define SERIAL_USART_TIMEOUT 100 +#endif + #define HANDSHAKE_MAGIC 7 static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) { @@ -201,21 +204,21 @@ int soft_serial_transaction(int index) { sdClear(&SERIAL_USART_DRIVER); // First chunk is always transaction id - sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(TIMEOUT)); + sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(SERIAL_USART_TIMEOUT)); uint8_t sstd_index_shake = 0xFF; // Which we always read back first so that we can error out correctly // - due to the half duplex limitations on return codes, we always have to read *something* // - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready - res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(TIMEOUT)); + res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) { dprintf("serial::usart_shake NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE; } if (trans->initiator2target_buffer_size) { - res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(TIMEOUT)); + res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0) { dprintf("serial::usart_transmit NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE; @@ -223,7 +226,7 @@ int soft_serial_transaction(int index) { } if (trans->target2initiator_buffer_size) { - res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(TIMEOUT)); + res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT)); if (res < 0) { dprintf("serial::usart_receive NO_RESPONSE\n"); return TRANSACTION_NO_RESPONSE; From 3cc7d22732e201d5fd83931e5cfee21f83fd2352 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 29 Nov 2020 10:54:29 -0800 Subject: [PATCH 002/145] Branch point for 2021 Feb 27 Breaking Change --- readme.md | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/readme.md b/readme.md index 6092f209be1..6321681a924 100644 --- a/readme.md +++ b/readme.md @@ -7,6 +7,12 @@ [![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly) [![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/) +# THIS IS THE DEVELOP BRANCH + +Warning- This is the `develop` branch of QMK Firmware. You may encounter broken code here. Please see [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) for more information. + +# Original readme continues + This is a keyboard firmware based on the [tmk\_keyboard firmware](https://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](https://ergodox-ez.com) keyboard, and the [Clueboard product line](https://clueboard.co). ## Documentation From a8d0ec0749046b0ab89c18b1b7083b1e8674de2a Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Tue, 1 Dec 2020 12:04:42 -0600 Subject: [PATCH 003/145] [Split] Sync Timer feature (#10997) A timer that is kept in sync between the halves of a split keyboard --- quantum/quantum.h | 1 + quantum/rgb_matrix.c | 6 ++-- quantum/rgblight.c | 21 ++++++------ quantum/split_common/transport.c | 26 +++++++++++++- tmk_core/common.mk | 1 + tmk_core/common/keyboard.c | 2 ++ tmk_core/common/sync_timer.c | 58 ++++++++++++++++++++++++++++++++ tmk_core/common/sync_timer.h | 54 +++++++++++++++++++++++++++++ 8 files changed, 154 insertions(+), 15 deletions(-) create mode 100644 tmk_core/common/sync_timer.c create mode 100644 tmk_core/common/sync_timer.h diff --git a/quantum/quantum.h b/quantum/quantum.h index cb0af306ac9..59c3dd4904d 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -53,6 +53,7 @@ #include "eeconfig.h" #include "bootloader.h" #include "timer.h" +#include "sync_timer.h" #include "config_common.h" #include "led.h" #include "action_util.h" diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index f239bd582f0..a3dd51f7b34 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -266,9 +266,9 @@ static bool rgb_matrix_none(effect_params_t *params) { static void rgb_task_timers(void) { #if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0 - uint32_t deltaTime = timer_elapsed32(rgb_timer_buffer); + uint32_t deltaTime = sync_timer_elapsed32(rgb_timer_buffer); #endif // defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0 - rgb_timer_buffer = timer_read32(); + rgb_timer_buffer = sync_timer_read32(); // Update double buffer timers #if RGB_DISABLE_TIMEOUT > 0 @@ -296,7 +296,7 @@ static void rgb_task_timers(void) { static void rgb_task_sync(void) { // next task - if (timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING; + if (sync_timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING; } static void rgb_task_start(void) { diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 7f9e330d371..65308572dbd 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -29,7 +29,7 @@ #endif #include "wait.h" #include "progmem.h" -#include "timer.h" +#include "sync_timer.h" #include "rgblight.h" #include "color.h" #include "debug.h" @@ -684,18 +684,16 @@ static void rgblight_layers_write(void) { # ifdef RGBLIGHT_LAYER_BLINK rgblight_layer_mask_t _blinked_layer_mask = 0; -uint16_t _blink_duration = 0; static uint16_t _blink_timer; void rgblight_blink_layer(uint8_t layer, uint16_t duration_ms) { rgblight_set_layer_state(layer, true); _blinked_layer_mask |= 1 << layer; - _blink_timer = timer_read(); - _blink_duration = duration_ms; + _blink_timer = sync_timer_read() + duration_ms; } void rgblight_unblink_layers(void) { - if (_blinked_layer_mask != 0 && timer_elapsed(_blink_timer) > _blink_duration) { + if (_blinked_layer_mask != 0 && timer_expired(sync_timer_read(), _blink_timer)) { for (uint8_t layer = 0; layer < RGBLIGHT_MAX_LAYERS; layer++) { if ((_blinked_layer_mask & 1 << layer) != 0) { rgblight_set_layer_state(layer, false); @@ -799,7 +797,7 @@ void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) { animation_status.restart = true; } # endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */ -# endif /* RGBLIGHT_USE_TIMER */ +# endif /* RGBLIGHT_USE_TIMER */ } #endif /* RGBLIGHT_SPLIT */ @@ -832,7 +830,7 @@ void rgblight_timer_enable(void) { if (!is_static_effect(rgblight_config.mode)) { rgblight_status.timer_enabled = true; } - animation_status.last_timer = timer_read(); + animation_status.last_timer = sync_timer_read(); RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; dprintf("rgblight timer enabled.\n"); } @@ -941,18 +939,19 @@ void rgblight_task(void) { # endif if (animation_status.restart) { animation_status.restart = false; - animation_status.last_timer = timer_read() - interval_time - 1; + animation_status.last_timer = sync_timer_read(); animation_status.pos16 = 0; // restart signal to local each effect } - if (timer_elapsed(animation_status.last_timer) >= interval_time) { + uint16_t now = sync_timer_read(); + if (timer_expired(now, animation_status.last_timer)) { # if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) static uint16_t report_last_timer = 0; static bool tick_flag = false; uint16_t oldpos16; if (tick_flag) { tick_flag = false; - if (timer_elapsed(report_last_timer) >= 30000) { - report_last_timer = timer_read(); + if (timer_expired(now, report_last_timer)) { + report_last_timer += 30000; dprintf("rgblight animation tick report to slave\n"); RGBLIGHT_SPLIT_ANIMATION_TICK; } diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index 467ff81a97c..6856b605588 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -6,6 +6,7 @@ #include "quantum.h" #define ROWS_PER_HAND (MATRIX_ROWS / 2) +#define SYNC_TIMER_OFFSET 2 #ifdef RGBLIGHT_ENABLE # include "rgblight.h" @@ -27,6 +28,9 @@ static pin_t encoders_pad[] = ENCODERS_PAD_A; # include "i2c_slave.h" typedef struct _I2C_slave_buffer_t { +# ifndef DISABLE_SYNC_TIMER + uint32_t sync_timer; +# endif matrix_row_t smatrix[ROWS_PER_HAND]; uint8_t backlight_level; # if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) @@ -44,6 +48,7 @@ static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_re # define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level) # define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) +# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer) # define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) # define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state) # define I2C_WPM_START offsetof(I2C_slave_buffer_t, current_wpm) @@ -91,10 +96,18 @@ bool transport_master(matrix_row_t matrix[]) { } } # endif + +# ifndef DISABLE_SYNC_TIMER + i2c_buffer->sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; + i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_SYNC_TIME_START, (void *)&i2c_buffer->sync_timer, sizeof(i2c_buffer->sync_timer), TIMEOUT); +# endif return true; } void transport_slave(matrix_row_t matrix[]) { +# ifndef DISABLE_SYNC_TIMER + sync_timer_update(i2c_buffer->sync_timer); +# endif // Copy matrix to I2C buffer memcpy((void *)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix)); @@ -133,12 +146,15 @@ typedef struct _Serial_s2m_buffer_t { matrix_row_t smatrix[ROWS_PER_HAND]; # ifdef ENCODER_ENABLE - uint8_t encoder_state[NUMBER_OF_ENCODERS]; + uint8_t encoder_state[NUMBER_OF_ENCODERS]; # endif } Serial_s2m_buffer_t; typedef struct _Serial_m2s_buffer_t { +# ifndef DISABLE_SYNC_TIMER + uint32_t sync_timer; +# endif # ifdef BACKLIGHT_ENABLE uint8_t backlight_level; # endif @@ -251,11 +267,19 @@ bool transport_master(matrix_row_t matrix[]) { // Write wpm to slave serial_m2s_buffer.current_wpm = get_current_wpm(); # endif + +# ifndef DISABLE_SYNC_TIMER + serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; +# endif return true; } void transport_slave(matrix_row_t matrix[]) { transport_rgblight_slave(); +# ifndef DISABLE_SYNC_TIMER + sync_timer_update(serial_m2s_buffer.sync_timer); +# endif + // TODO: if MATRIX_COLS > 8 change to pack() for (int i = 0; i < ROWS_PER_HAND; ++i) { serial_s2m_buffer.smatrix[i] = matrix[i]; diff --git a/tmk_core/common.mk b/tmk_core/common.mk index fdf2aa09727..05839824c08 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -18,6 +18,7 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \ $(COMMON_DIR)/report.c \ $(PLATFORM_COMMON_DIR)/suspend.c \ $(PLATFORM_COMMON_DIR)/timer.c \ + $(COMMON_DIR)/sync_timer.c \ $(PLATFORM_COMMON_DIR)/bootloader.c \ ifeq ($(PLATFORM),AVR) diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 8c7bdc8b55f..a1fbc01da67 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -23,6 +23,7 @@ along with this program. If not, see . #include "led.h" #include "keycode.h" #include "timer.h" +#include "sync_timer.h" #include "print.h" #include "debug.h" #include "command.h" @@ -255,6 +256,7 @@ __attribute__((weak)) void housekeeping_task_user(void) {} */ void keyboard_init(void) { timer_init(); + sync_timer_init(); matrix_init(); #ifdef VIA_ENABLE via_init(); diff --git a/tmk_core/common/sync_timer.c b/tmk_core/common/sync_timer.c new file mode 100644 index 00000000000..de24b463b6b --- /dev/null +++ b/tmk_core/common/sync_timer.c @@ -0,0 +1,58 @@ +/* +Copyright (C) 2020 Ryan Caltabiano + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies +of the Software, and to permit persons to whom the Software is furnished to do +so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +If you happen to meet one of the copyright holders in a bar you are obligated +to buy them one pint of beer. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "sync_timer.h" +#include "keyboard.h" + +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) +volatile int32_t sync_timer_ms; + +void sync_timer_init(void) { sync_timer_ms = 0; } + +void sync_timer_update(uint32_t time) { + if (is_keyboard_master()) return; + sync_timer_ms = time - timer_read32(); +} + +uint16_t sync_timer_read(void) { + if (is_keyboard_master()) return timer_read(); + return sync_timer_read32(); +} + +uint32_t sync_timer_read32(void) { + if (is_keyboard_master()) return timer_read32(); + return sync_timer_ms + timer_read32(); +} + +uint16_t sync_timer_elapsed(uint16_t last) { + if (is_keyboard_master()) return timer_elapsed(last); + return TIMER_DIFF_16(sync_timer_read(), last); +} + +uint32_t sync_timer_elapsed32(uint32_t last) { + if (is_keyboard_master()) return timer_elapsed32(last); + return TIMER_DIFF_32(sync_timer_read32(), last); +} +#endif diff --git a/tmk_core/common/sync_timer.h b/tmk_core/common/sync_timer.h new file mode 100644 index 00000000000..9ddef45bb26 --- /dev/null +++ b/tmk_core/common/sync_timer.h @@ -0,0 +1,54 @@ +/* +Copyright (C) 2020 Ryan Caltabiano + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies +of the Software, and to permit persons to whom the Software is furnished to do +so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +If you happen to meet one of the copyright holders in a bar you are obligated +to buy them one pint of beer. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#pragma once + +#include +#include "timer.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) +void sync_timer_init(void); +void sync_timer_update(uint32_t time); +uint16_t sync_timer_read(void); +uint32_t sync_timer_read32(void); +uint16_t sync_timer_elapsed(uint16_t last); +uint32_t sync_timer_elapsed32(uint32_t last); +#else +# define sync_timer_init() +# define sync_timer_clear() +# define sync_timer_update(t) +# define sync_timer_read() timer_read() +# define sync_timer_read32() timer_read32() +# define sync_timer_elapsed(t) timer_elapsed(t) +# define sync_timer_elapsed32(t) timer_elapsed32(t) +#endif + +#ifdef __cplusplus +} +#endif From 87291437bd5afccb44677db3ebcf0c284128e990 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 3 Dec 2020 13:04:28 +1100 Subject: [PATCH 004/145] Add board specific to Proton-C, with usual defaults turned on. (#10976) - Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output --- build_keyboard.mk | 4 +- docs/ja/proton_c_conversion.md | 1 + docs/proton_c_conversion.md | 1 + .../1upkeyboards/sweet16/v2/proton_c/rules.mk | 1 + keyboards/acheron/shark/rules.mk | 1 + .../atreus/keymaps/ridingqwerty/rules.mk | 1 + keyboards/boston_meetup/2019/rules.mk | 1 + keyboards/c39/keymaps/drashna/rules.mk | 1 + keyboards/ckeys/thedora/rules.mk | 1 + keyboards/clueboard/60/rules.mk | 1 + keyboards/clueboard/66/rev4/rules.mk | 1 + keyboards/clueboard/66_hotswap/gen1/rules.mk | 1 + keyboards/clueboard/california/rules.mk | 1 + keyboards/dztech/dz60rgb/v1/rules.mk | 1 + keyboards/dztech/dz60rgb_ansi/v1/rules.mk | 1 + keyboards/dztech/dz60rgb_wkl/v1/rules.mk | 1 + keyboards/dztech/dz65rgb/v1/rules.mk | 1 + keyboards/hadron/ver3/rules.mk | 1 + keyboards/handwired/co60/rev6/rules.mk | 1 + keyboards/handwired/co60/rev7/rules.mk | 1 + keyboards/handwired/d48/rules.mk | 1 + keyboards/handwired/ddg_56/rules.mk | 1 + keyboards/handwired/floorboard/rules.mk | 1 + keyboards/handwired/onekey/proton_c/rules.mk | 1 + keyboards/handwired/onekey/pytest/rules.mk | 1 + keyboards/handwired/selene/rules.mk | 1 + keyboards/handwired/sick_pad/rules.mk | 1 + keyboards/handwired/steamvan/rev1/rules.mk | 1 + keyboards/handwired/wulkan/rules.mk | 1 + keyboards/hs60/v2/ansi/rules.mk | 1 + keyboards/hs60/v2/hhkb/rules.mk | 1 + keyboards/hs60/v2/iso/rules.mk | 1 + keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk | 1 + keyboards/kv/revt/rules.mk | 1 + keyboards/mechlovin/adelais/rules.mk | 1 + keyboards/mechlovin/hannah60rgb/rules.mk | 1 + keyboards/mechlovin/hannah65/rules.mk | 1 + keyboards/mechlovin/infinity87/rules.mk | 1 + keyboards/mechlovin/infinity88/rules.mk | 1 + keyboards/melgeek/mj61/rev1/rules.mk | 1 + keyboards/melgeek/mj63/rev1/rules.mk | 1 + keyboards/melgeek/mj64/rev1/rules.mk | 1 + keyboards/melgeek/mj64/rev2/rules.mk | 1 + keyboards/melgeek/mojo75/rev1/rules.mk | 1 + keyboards/melgeek/z70ultra/rev1/rules.mk | 1 + keyboards/moonlander/rules.mk | 1 + keyboards/nebula68/rules.mk | 1 + keyboards/nk65/rules.mk | 1 + keyboards/nk87/rules.mk | 1 + keyboards/planck/ez/rules.mk | 1 + keyboards/planck/rev6/rules.mk | 1 + keyboards/preonic/rev3/rules.mk | 1 + keyboards/rgbkb/pan/rev1/proton_c/rules.mk | 1 + keyboards/yugo_m/model_m_101/rules.mk | 1 + .../GENERIC_STM32_F303XC/configs/mcuconf.h | 22 +- platforms/chibios/QMK_PROTON_C/board/board.mk | 9 + .../chibios/QMK_PROTON_C/configs/board.h | 37 + .../QMK_PROTON_C/configs/bootloader_defs.h | 7 + .../chibios/QMK_PROTON_C/configs/chconf.h | 714 ++++++++++++++++++ .../chibios/QMK_PROTON_C/configs/config.h | 20 + .../chibios/QMK_PROTON_C/configs/halconf.h | 525 +++++++++++++ .../chibios/QMK_PROTON_C/configs/mcuconf.h | 273 +++++++ .../convert_to_proton_c.mk} | 7 +- platforms/chibios/common/configs/halconf.h | 2 +- tmk_core/chibios.mk | 3 + 65 files changed, 1659 insertions(+), 17 deletions(-) create mode 100644 platforms/chibios/QMK_PROTON_C/board/board.mk create mode 100644 platforms/chibios/QMK_PROTON_C/configs/board.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/chconf.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/config.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/halconf.h create mode 100644 platforms/chibios/QMK_PROTON_C/configs/mcuconf.h rename platforms/chibios/{GENERIC_STM32_F303XC/configs/proton_c.mk => QMK_PROTON_C/convert_to_proton_c.mk} (64%) diff --git a/build_keyboard.mk b/build_keyboard.mk index e87dcb8f22c..8d018f2e3c6 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -136,9 +136,7 @@ ifeq ($(strip $(CTPC)), yes) endif ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) - TARGET := $(TARGET)_proton_c - include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk - OPT_DEFS += -DCONVERT_TO_PROTON_C + include platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk endif ifneq ($(FORCE_LAYOUT),) diff --git a/docs/ja/proton_c_conversion.md b/docs/ja/proton_c_conversion.md index 6e4f7dcb663..e7c07413ce5 100644 --- a/docs/ja/proton_c_conversion.md +++ b/docs/ja/proton_c_conversion.md @@ -51,6 +51,7 @@ Proton C には1つのオンボード LED(C13)しかなく、デフォルトで ``` MCU = STM32F303 +BOARD = QMK_PROTON_C ``` 次の変数が存在する場合は削除します。 diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md index 1b5e496e74a..47511e1b1e0 100644 --- a/docs/proton_c_conversion.md +++ b/docs/proton_c_conversion.md @@ -44,6 +44,7 @@ To use the Proton C natively, without having to specify `CTPC=yes`, you need to ``` MCU = STM32F303 +BOARD = QMK_PROTON_C ``` Remove these variables if they exist: diff --git a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk index dedcf043af6..6fb15f5a832 100644 --- a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk +++ b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C ## Features CONSOLE_ENABLE = yes diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 1bd963c8172..214c995ae90 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/atreus/keymaps/ridingqwerty/rules.mk b/keyboards/atreus/keymaps/ridingqwerty/rules.mk index 5c89d5481d6..ebf83f02e8a 100644 --- a/keyboards/atreus/keymaps/ridingqwerty/rules.mk +++ b/keyboards/atreus/keymaps/ridingqwerty/rules.mk @@ -1,4 +1,5 @@ MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk index aa35ba75394..9076d9ab4d8 100644 --- a/keyboards/boston_meetup/2019/rules.mk +++ b/keyboards/boston_meetup/2019/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index 6ebd15a1803..09c29f0e8f2 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -1,4 +1,5 @@ MCU = STM32F303 +BOARD = QMK_PROTON_C BOOTLOADER = BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk index 92665ffb6d6..8394b1a6cc9 100755 --- a/keyboards/ckeys/thedora/rules.mk +++ b/keyboards/ckeys/thedora/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk index a9151b87d22..87f56692f6d 100644 --- a/keyboards/clueboard/60/rules.mk +++ b/keyboards/clueboard/60/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk index f8e4c07a479..f6120c929ff 100644 --- a/keyboards/clueboard/66/rev4/rules.mk +++ b/keyboards/clueboard/66/rev4/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index 3667d63b76a..c508ecbb547 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # LED Configuration LED_MATRIX_ENABLE = yes diff --git a/keyboards/clueboard/california/rules.mk b/keyboards/clueboard/california/rules.mk index e96afd8135c..11719015e9a 100644 --- a/keyboards/clueboard/california/rules.mk +++ b/keyboards/clueboard/california/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C ## Features MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index d71fb4c531b..88207bc3f51 100644 --- a/keyboards/dztech/dz60rgb/v1/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index d71fb4c531b..88207bc3f51 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index 9dfe170032a..426769e248f 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index 4570dc3bd31..da88300da54 100644 --- a/keyboards/dztech/dz65rgb/v1/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index 6c13bd2bc1f..e75b0c721a3 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk index b20c2efedc7..f4e7ae924d1 100644 --- a/keyboards/handwired/co60/rev6/rules.mk +++ b/keyboards/handwired/co60/rev6/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk index 50e4bb8918c..3e15f073ff7 100644 --- a/keyboards/handwired/co60/rev7/rules.mk +++ b/keyboards/handwired/co60/rev7/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Use SPI for RGB underglow: WS2812_DRIVER = spi diff --git a/keyboards/handwired/d48/rules.mk b/keyboards/handwired/d48/rules.mk index 57c83694e1d..41a6cc5220b 100644 --- a/keyboards/handwired/d48/rules.mk +++ b/keyboards/handwired/d48/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 0604f117639..dfbb0959f94 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index 5a83cfcf964..88bc406a23d 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/onekey/proton_c/rules.mk b/keyboards/handwired/onekey/proton_c/rules.mk index b17a3d0316b..4e157baeda1 100644 --- a/keyboards/handwired/onekey/proton_c/rules.mk +++ b/keyboards/handwired/onekey/proton_c/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C diff --git a/keyboards/handwired/onekey/pytest/rules.mk b/keyboards/handwired/onekey/pytest/rules.mk index b17a3d0316b..4e157baeda1 100644 --- a/keyboards/handwired/onekey/pytest/rules.mk +++ b/keyboards/handwired/onekey/pytest/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C diff --git a/keyboards/handwired/selene/rules.mk b/keyboards/handwired/selene/rules.mk index 9416bc5fd3e..bfb967f9a53 100644 --- a/keyboards/handwired/selene/rules.mk +++ b/keyboards/handwired/selene/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/sick_pad/rules.mk b/keyboards/handwired/sick_pad/rules.mk index bfe731ecce7..28578f08246 100644 --- a/keyboards/handwired/sick_pad/rules.mk +++ b/keyboards/handwired/sick_pad/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk index 797d7b35da2..30c74d2ece1 100644 --- a/keyboards/handwired/steamvan/rev1/rules.mk +++ b/keyboards/handwired/steamvan/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Use SPI for RGB underglow: WS2812_DRIVER = spi diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index 25bb402698c..b23f2a5fe1c 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # comment out to disable the options. diff --git a/keyboards/hs60/v2/ansi/rules.mk b/keyboards/hs60/v2/ansi/rules.mk index 8efabcccbf9..74889decfb8 100644 --- a/keyboards/hs60/v2/ansi/rules.mk +++ b/keyboards/hs60/v2/ansi/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/hs60/v2/hhkb/rules.mk b/keyboards/hs60/v2/hhkb/rules.mk index 14951cca70b..561a8cd06ab 100644 --- a/keyboards/hs60/v2/hhkb/rules.mk +++ b/keyboards/hs60/v2/hhkb/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/hs60/v2/iso/rules.mk b/keyboards/hs60/v2/iso/rules.mk index 96bfbce056b..62af70cc059 100644 --- a/keyboards/hs60/v2/iso/rules.mk +++ b/keyboards/hs60/v2/iso/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk index 4e9bcf21a7a..4e79819ff7b 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C BACKLIGHT_ENABLE = no BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk index d97369b1503..94db629541f 100644 --- a/keyboards/kv/revt/rules.mk +++ b/keyboards/kv/revt/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index e1d36928fe3..5ea0bd12c1e 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index eb9b1528384..2fe4bb7aa53 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/hannah65/rules.mk b/keyboards/mechlovin/hannah65/rules.mk index 74157ae7150..57ead17faa9 100644 --- a/keyboards/mechlovin/hannah65/rules.mk +++ b/keyboards/mechlovin/hannah65/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk index 00676c2ecb4..a405eda0375 100644 --- a/keyboards/mechlovin/infinity87/rules.mk +++ b/keyboards/mechlovin/infinity87/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/mechlovin/infinity88/rules.mk b/keyboards/mechlovin/infinity88/rules.mk index 7897007c01c..40e4543e891 100644 --- a/keyboards/mechlovin/infinity88/rules.mk +++ b/keyboards/mechlovin/infinity88/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj61/rev1/rules.mk b/keyboards/melgeek/mj61/rev1/rules.mk index 12c66f05a58..6f196e88492 100644 --- a/keyboards/melgeek/mj61/rev1/rules.mk +++ b/keyboards/melgeek/mj61/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj63/rev1/rules.mk b/keyboards/melgeek/mj63/rev1/rules.mk index d5fc76b8e77..c55beb7d1f7 100644 --- a/keyboards/melgeek/mj63/rev1/rules.mk +++ b/keyboards/melgeek/mj63/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj64/rev1/rules.mk b/keyboards/melgeek/mj64/rev1/rules.mk index 01b8aca4143..f50aefd0498 100644 --- a/keyboards/melgeek/mj64/rev1/rules.mk +++ b/keyboards/melgeek/mj64/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mj64/rev2/rules.mk b/keyboards/melgeek/mj64/rev2/rules.mk index 01b8aca4143..f50aefd0498 100644 --- a/keyboards/melgeek/mj64/rev2/rules.mk +++ b/keyboards/melgeek/mj64/rev2/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/mojo75/rev1/rules.mk b/keyboards/melgeek/mojo75/rev1/rules.mk index 12c66f05a58..6f196e88492 100644 --- a/keyboards/melgeek/mojo75/rev1/rules.mk +++ b/keyboards/melgeek/mojo75/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/melgeek/z70ultra/rev1/rules.mk b/keyboards/melgeek/z70ultra/rev1/rules.mk index dce0366f73f..48087186d60 100644 --- a/keyboards/melgeek/z70ultra/rev1/rules.mk +++ b/keyboards/melgeek/z70ultra/rev1/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk index 124061072fb..561db849e74 100644 --- a/keyboards/moonlander/rules.mk +++ b/keyboards/moonlander/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/nebula68/rules.mk b/keyboards/nebula68/rules.mk index 399385b3e0e..40e17f1b4f1 100755 --- a/keyboards/nebula68/rules.mk +++ b/keyboards/nebula68/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk index f7db412a243..af41e71cbc9 100755 --- a/keyboards/nk65/rules.mk +++ b/keyboards/nk65/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/nk87/rules.mk b/keyboards/nk87/rules.mk index cdf4668ec16..e10ec5bc03f 100755 --- a/keyboards/nk87/rules.mk +++ b/keyboards/nk87/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Do not put the microcontroller into power saving mode # when we get USB suspend event. We want it to keep updating diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk index 18eada389f1..716e5feda7a 100644 --- a/keyboards/planck/ez/rules.mk +++ b/keyboards/planck/ez/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/rev6/rules.mk b/keyboards/planck/rev6/rules.mk index 02d6b895356..fc43bef5713 100644 --- a/keyboards/planck/rev6/rules.mk +++ b/keyboards/planck/rev6/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk index a5fc16a2e57..e4d48e5b592 100644 --- a/keyboards/preonic/rev3/rules.mk +++ b/keyboards/preonic/rev3/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk index b17a3d0316b..e7e9d992d2e 100644 --- a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk +++ b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk @@ -1,2 +1,3 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C \ No newline at end of file diff --git a/keyboards/yugo_m/model_m_101/rules.mk b/keyboards/yugo_m/model_m_101/rules.mk index 6d1c5312311..12a2e3dea67 100644 --- a/keyboards/yugo_m/model_m_101/rules.mk +++ b/keyboards/yugo_m/model_m_101/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h index ac2d9a1eed5..c6f5a8ac520 100644 --- a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h +++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h @@ -127,8 +127,8 @@ * DAC driver system settings. */ #define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE #define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 @@ -141,10 +141,10 @@ #define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM3 FALSE #define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 TRUE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM15 FALSE #define STM32_GPT_USE_TIM16 FALSE #define STM32_GPT_USE_TIM17 FALSE #define STM32_GPT_TIM1_IRQ_PRIORITY 7 @@ -158,7 +158,7 @@ /* * I2C driver system settings. */ -#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C1 FALSE #define STM32_I2C_USE_I2C2 FALSE #define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_I2C1_IRQ_PRIORITY 10 @@ -189,8 +189,8 @@ #define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM15 FALSE #define STM32_PWM_USE_TIM16 FALSE @@ -213,7 +213,7 @@ * SERIAL driver system settings. */ #define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE @@ -227,7 +227,7 @@ * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 diff --git a/platforms/chibios/QMK_PROTON_C/board/board.mk b/platforms/chibios/QMK_PROTON_C/board/board.mk new file mode 100644 index 00000000000..f891e652476 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/QMK_PROTON_C/configs/board.h b/platforms/chibios/QMK_PROTON_C/configs/board.h new file mode 100644 index 00000000000..97159964d05 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/board.h @@ -0,0 +1,37 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include_next "board.h" + +#undef STM32_HSE_BYPASS + +/* + * USB bus activation macro, required by the USB driver. + */ +#define usb_lld_connect_bus(usbp) \ + do { \ + palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)); \ + } while (0) + +/* + * USB bus de-activation macro, required by the USB driver. + */ +#define usb_lld_disconnect_bus(usbp) \ + do { \ + palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL); \ + palClearPad(GPIOA, GPIOA_USB_DP); \ + } while (0) diff --git a/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h new file mode 100644 index 00000000000..3b0e9d20a6a --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/QMK_PROTON_C/configs/chconf.h new file mode 100644 index 00000000000..aac33037058 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 100000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/platforms/chibios/QMK_PROTON_C/configs/config.h b/platforms/chibios/QMK_PROTON_C/configs/config.h new file mode 100644 index 00000000000..a73f0c0b475 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/config.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/QMK_PROTON_C/configs/halconf.h new file mode 100644 index 00000000000..a9f2cf77b49 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS TRUE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h new file mode 100644 index 00000000000..ac2d9a1eed5 --- /dev/null +++ b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h @@ -0,0 +1,273 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF +#define STM32F303_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 15 +#define STM32_IRQ_EXTI20_PRIORITY 15 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_USE_TIM15 TRUE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk similarity index 64% rename from platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk rename to platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk index 23907c810a3..3fa73a96e03 100644 --- a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk +++ b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk @@ -1,9 +1,12 @@ # Proton C MCU settings for converting AVR projects -MCU = STM32F303 +TARGET := $(TARGET)_proton_c +MCU := STM32F303 +BOARD := QMK_PROTON_C +OPT_DEFS += -DCONVERT_TO_PROTON_C # These are defaults based on what has been implemented for ARM boards AUDIO_ENABLE = yes WS2812_DRIVER = bitbang # Force task driven PWM until ARM can provide automatic configuration -BACKLIGHT_DRIVER = software +BACKLIGHT_DRIVER = software \ No newline at end of file diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h index 6b48e289f90..a9f2cf77b49 100644 --- a/platforms/chibios/common/configs/halconf.h +++ b/platforms/chibios/common/configs/halconf.h @@ -31,7 +31,7 @@ #define _CHIBIOS_HAL_CONF_ #define _CHIBIOS_HAL_CONF_VER_7_0_ -#include "mcuconf.h" +#include /** * @brief Enables the PAL subsystem. diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index e53edccee21..ceed2a7b428 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -71,6 +71,9 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk)"," BOARD_PATH = $(TOP_DIR)/platforms/chibios/$(BOARD) BOARD_MK += $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk KEYBOARD_PATHS += $(BOARD_PATH)/configs + ifneq ("$(wildcard $(BOARD_PATH)/rules.mk)","") + include $(BOARD_PATH)/rules.mk + endif endif ifeq ("$(wildcard $(BOARD_MK))","") From 4444f3cc55f246e484c6893f88d891c4c00c2166 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Fri, 4 Dec 2020 10:45:39 +1100 Subject: [PATCH 005/145] Disable almost all ChibiOS subsystems in default configs (#11111) * Disable almost all ChibiOS subsystems. * Modify ChibiOS config updater script to fixup mcuconf include, use develop as base instead of master. * Add default early-init bootloader to F042/F072. * Back to 100k freq. --- .../handwired/onekey/blackpill_f401}/chconf.h | 0 .../handwired/onekey/blackpill_f411}/chconf.h | 0 .../handwired/pill60/blackpill_f401/chconf.h | 714 ++++++++++++++++++ .../handwired/pill60/blackpill_f411/chconf.h | 714 ++++++++++++++++++ keyboards/handwired/riblee_f401/chconf.h | 714 ++++++++++++++++++ .../handwired/riblee_f401}/halconf.h | 0 keyboards/handwired/riblee_f401/mcuconf.h | 253 +++++++ keyboards/handwired/riblee_f411/chconf.h | 714 ++++++++++++++++++ keyboards/nack/rules.mk | 1 + .../BLACKPILL_STM32_F411/configs/halconf.h | 525 ------------- .../GENERIC_STM32_F042X6/configs/config.h | 20 + .../GENERIC_STM32_F072XB/configs/config.h | 20 + .../GENERIC_STM32_F072XB/configs/mcuconf.h | 4 +- platforms/chibios/common/configs/chconf.h | 20 +- platforms/chibios/common/configs/halconf.h | 16 +- ...os-upgrader.sh => chibios_conf_updater.sh} | 10 +- 16 files changed, 3179 insertions(+), 546 deletions(-) rename {platforms/chibios/BLACKPILL_STM32_F401/configs => keyboards/handwired/onekey/blackpill_f401}/chconf.h (100%) rename {platforms/chibios/BLACKPILL_STM32_F411/configs => keyboards/handwired/onekey/blackpill_f411}/chconf.h (100%) create mode 100644 keyboards/handwired/pill60/blackpill_f401/chconf.h create mode 100644 keyboards/handwired/pill60/blackpill_f411/chconf.h create mode 100644 keyboards/handwired/riblee_f401/chconf.h rename {platforms/chibios/BLACKPILL_STM32_F401/configs => keyboards/handwired/riblee_f401}/halconf.h (100%) create mode 100644 keyboards/handwired/riblee_f401/mcuconf.h create mode 100644 keyboards/handwired/riblee_f411/chconf.h delete mode 100644 platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h create mode 100644 platforms/chibios/GENERIC_STM32_F042X6/configs/config.h create mode 100644 platforms/chibios/GENERIC_STM32_F072XB/configs/config.h rename util/{chibios-upgrader.sh => chibios_conf_updater.sh} (95%) diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h similarity index 100% rename from platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h rename to keyboards/handwired/onekey/blackpill_f401/chconf.h diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h similarity index 100% rename from platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h rename to keyboards/handwired/onekey/blackpill_f411/chconf.h diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h new file mode 100644 index 00000000000..7dc4f84a8a0 --- /dev/null +++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h new file mode 100644 index 00000000000..7dc4f84a8a0 --- /dev/null +++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h new file mode 100644 index 00000000000..7dc4f84a8a0 --- /dev/null +++ b/keyboards/handwired/riblee_f401/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h b/keyboards/handwired/riblee_f401/halconf.h similarity index 100% rename from platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h rename to keyboards/handwired/riblee_f401/halconf.h diff --git a/keyboards/handwired/riblee_f401/mcuconf.h b/keyboards/handwired/riblee_f401/mcuconf.h new file mode 100644 index 00000000000..ba6e934fe7b --- /dev/null +++ b/keyboards/handwired/riblee_f401/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h new file mode 100644 index 00000000000..7dc4f84a8a0 --- /dev/null +++ b/keyboards/handwired/riblee_f411/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/nack/rules.mk b/keyboards/nack/rules.mk index 8b803b3ae81..92103cab137 100644 --- a/keyboards/nack/rules.mk +++ b/keyboards/nack/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h b/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h deleted file mode 100644 index a8db392aaa6..00000000000 --- a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h b/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h new file mode 100644 index 00000000000..a73f0c0b475 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h new file mode 100644 index 00000000000..a73f0c0b475 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h @@ -0,0 +1,20 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h index 688350e9ce6..d6b6aae4f18 100644 --- a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h @@ -124,7 +124,7 @@ #define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_TIM1_IRQ_PRIORITY 3 #define STM32_PWM_TIM2_IRQ_PRIORITY 3 #define STM32_PWM_TIM3_IRQ_PRIORITY 3 @@ -141,7 +141,7 @@ * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 2 diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h index aac33037058..2fad3f769b5 100644 --- a/platforms/chibios/common/configs/chconf.h +++ b/platforms/chibios/common/configs/chconf.h @@ -308,7 +308,7 @@ * @note Requires @p CH_CFG_USE_MESSAGES. */ #if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE #endif /** @@ -331,7 +331,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE +#define CH_CFG_USE_MEMCORE FALSE #endif /** @@ -411,7 +411,7 @@ * @note The default is @p FALSE. */ #if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #endif /** @@ -427,42 +427,42 @@ * @brief Enables the registry of generic objects. */ #if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE #endif /** * @brief Enables factory for generic buffers. */ #if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE #endif /** * @brief Enables factory for semaphores. */ #if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE +#define CH_CFG_FACTORY_SEMAPHORES FALSE #endif /** * @brief Enables factory for mailboxes. */ #if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE +#define CH_CFG_FACTORY_MAILBOXES FALSE #endif /** * @brief Enables factory for objects FIFOs. */ #if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE #endif /** * @brief Enables factory for Pipes. */ #if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE +#define CH_CFG_FACTORY_PIPES FALSE #endif /** @} */ @@ -547,7 +547,7 @@ * @p panic_msg variable set to @p NULL. */ #if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE +#define CH_DBG_ENABLE_STACK_CHECK FALSE #endif /** diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h index a9f2cf77b49..880e7f97aa3 100644 --- a/platforms/chibios/common/configs/halconf.h +++ b/platforms/chibios/common/configs/halconf.h @@ -65,21 +65,21 @@ * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE +#define HAL_USE_DAC FALSE #endif /** * @brief Enables the GPT subsystem. */ #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE +#define HAL_USE_GPT FALSE #endif /** * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE +#define HAL_USE_I2C FALSE #endif /** @@ -114,7 +114,7 @@ * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE +#define HAL_USE_PWM FALSE #endif /** @@ -142,7 +142,7 @@ * @brief Enables the SERIAL over USB subsystem. */ #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE +#define HAL_USE_SERIAL_USB FALSE #endif /** @@ -156,7 +156,7 @@ * @brief Enables the SPI subsystem. */ #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE +#define HAL_USE_SPI FALSE #endif /** @@ -203,7 +203,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS TRUE +#define PAL_USE_CALLBACKS FALSE #endif /** @@ -211,7 +211,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT TRUE +#define PAL_USE_WAIT FALSE #endif /*===========================================================================*/ diff --git a/util/chibios-upgrader.sh b/util/chibios_conf_updater.sh similarity index 95% rename from util/chibios-upgrader.sh rename to util/chibios_conf_updater.sh index ebc12abe7d5..70bd80da1ea 100755 --- a/util/chibios-upgrader.sh +++ b/util/chibios_conf_updater.sh @@ -51,7 +51,7 @@ revert_chibi_files() { for file in $(find_chibi_files "$search_path" -name chconf.h -or -name halconf.h -or -name mcuconf.h -or -name board.c -or -name board.h -or -name board.mk -or -name board.chcfg) ; do pushd "$search_path" >/dev/null 2>&1 local relpath=$(realpath --relative-to="$search_path" "$file") - git checkout upstream/master -- "$relpath" || git checkout origin/master -- "$relpath" || true + git checkout upstream/develop -- "$relpath" || git checkout origin/develop -- "$relpath" || true popd >/dev/null 2>&1 done } @@ -132,6 +132,14 @@ upgrade_chconf_files() { upgrade_halconf_files() { upgrade_conf_files_generic halconf.h update_halconf.sh + + OIFS=$IFS + IFS=$'\n' + for file in $(find_chibi_files "$qmk_firmware_dir" -name halconf.h) ; do + echo $file + sed -i 's@#include "mcuconf.h"@#include @g' "$file" + done + IFS=$OIFS } upgrade_mcuconf_files() { From f1fef16e4dfce9c7659f23ce727d8564a5e420ce Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sat, 5 Dec 2020 21:13:58 +1100 Subject: [PATCH 006/145] ChibiOS upgrade: keyboard conf migrations (phase 1) (#10418) * ChibiOS conf upgrade for acheron/arctic acheron/arctic - 8d3d233f15bf5d396e29abb94f943a89b0b828d1 * ChibiOS conf upgrade for acheron/austin acheron/austin - beabc6204533de80704684de9ff7790895f319e1 * ChibiOS conf upgrade for acheron/keebspcb acheron/keebspcb - e14a96e99aab54aefebc1d3d24d64b0082db7842 * ChibiOS conf upgrade for aeboards/ext65/rev2 aeboards/ext65/rev2 - 0b97daef994903585be2768b6aaffc4da97ec617 * ChibiOS conf upgrade for ai03/vega ai03/vega - 7e5f208278309681fd1db8b2629890b813fdf938 * ChibiOS conf upgrade for at_at/660m at_at/660m - e30393b6546454f9939c1187aa9c6539f1ef76c1 * ChibiOS conf upgrade for bt66tech/bt66tech60 bt66tech/bt66tech60 - a7f4e8a224132830447d12c92d146997f9b56b7d * ChibiOS conf upgrade for cannonkeys/an_c cannonkeys/an_c - e7320dc09377fdad749e382b3986f2241633214b * ChibiOS conf upgrade for cannonkeys/atlas cannonkeys/atlas - 063a8eaea7e68607b725ad06777c49d34686b433 * ChibiOS conf upgrade for cannonkeys/chimera65 cannonkeys/chimera65 - 01ce66c862a5cd98183b10e992939a55038779bc * ChibiOS conf upgrade for cannonkeys/db60 cannonkeys/db60 - 45636d0b3cf951cef51a5b19678e2da549efd14f * ChibiOS conf upgrade for cannonkeys/devastatingtkl cannonkeys/devastatingtkl - 709e0155c421991fad283d38c28f850320ed4730 * ChibiOS conf upgrade for cannonkeys/instant60 cannonkeys/instant60 - 7e530e10794183d684a328f01b9b0743907440c7 * ChibiOS conf upgrade for cannonkeys/instant65 cannonkeys/instant65 - c8de288708d0586337cb7137ae54d97e1ddc90a6 * ChibiOS conf upgrade for cannonkeys/iron165 cannonkeys/iron165 - 3a3c0273e227fd15ab3527e4aa557b94d0b69248 * ChibiOS conf upgrade for cannonkeys/obliterated75 cannonkeys/obliterated75 - cdf834802ae77b1bbd4876eb8c34c19a83ad95cd * ChibiOS conf upgrade for cannonkeys/ortho48 cannonkeys/ortho48 - 3432ff13c83a6358eca44b37f72b18882eeda699 * ChibiOS conf upgrade for cannonkeys/ortho60 cannonkeys/ortho60 - 95be42a23798cc8f9b04175d4892b712d871a52d * ChibiOS conf upgrade for cannonkeys/ortho75 cannonkeys/ortho75 - e1149893fd01e853124808b45d521b61a7638eb9 * ChibiOS conf upgrade for cannonkeys/practice60 cannonkeys/practice60 - 6e4da87f0a766cf2665e9b4aa8e3ab33017cf745 * ChibiOS conf upgrade for cannonkeys/practice65 cannonkeys/practice65 - c436c06829123503073b3a9c5a1c0acfc2dbe2e5 * ChibiOS conf upgrade for cannonkeys/rekt1800 cannonkeys/rekt1800 - 43e8e21b62531534afeaa241f4c683fbdb60a8e0 * ChibiOS conf upgrade for cannonkeys/satisfaction75 cannonkeys/satisfaction75 - 28ff9a8a11ad1de9d09ec85fab2af906b7c27d6a * ChibiOS conf upgrade for cannonkeys/savage65 cannonkeys/savage65 - 53eaefae56020b536d4934686506d5d1fe51b6e0 * ChibiOS conf upgrade for cannonkeys/tmov2 cannonkeys/tmov2 - 8b1ced8ff7dc368afa268104cd5192bb1bfc8a1c * ChibiOS conf upgrade for chavdai40 chavdai40/rev1 - b166af66b084077764b705c9428725cde0b0ce51 chavdai40/rev2 - 0048c8ec8c28f1dfa5d1a37348524899595d8325 * ChibiOS conf upgrade for cheshire/curiosity cheshire/curiosity - f1636e53638ce2e798070e6e622fd88a08982d5a * ChibiOS conf upgrade for clueboard/60 clueboard/60 - bb5057d4a2976b6530fe2e345a4153de2f7c042d * ChibiOS conf upgrade for clueboard/66_hotswap/gen1 clueboard/66_hotswap/gen1 - 03fe10f4de7b67e5f1cf0a7d576f82676adf4261 * ChibiOS conf upgrade for clueboard/66/rev4 clueboard/66/rev4 - 878e38a34f97b32d9d109a6d98f98bc385d84864 * ChibiOS conf upgrade for coarse/cordillera coarse/cordillera - 5cae5c643e96d03bddcbb73e76e225ea5f82fef3 * ChibiOS conf upgrade for converter/siemens_tastatur converter/siemens_tastatur - 48f82cd227836878967dfa0fe0411f7d877a124c * ChibiOS conf upgrade for ergodox_infinity ergodox_infinity - 8df21d6129eef47d7a5ced92715e5bdbfb0151e5 * ChibiOS conf upgrade for function96 function96 - deecdcdca34c88058f820f0e2bc9f112458c85c5 * ChibiOS conf upgrade for generic_panda/panda65_01 generic_panda/panda65_01 - 8522d8107edcf71758f3be7298c0bc18fa7f6706 * ChibiOS conf upgrade for hadron/ver3 hadron/ver3 - 632af7727b767720c699abdff770edc9682928ee * ChibiOS conf upgrade for handwired/ck4x4 handwired/ck4x4 - a4cb9b5b8c3a162083677b14b105edbc1bca2baf * ChibiOS conf upgrade for handwired/co60/rev6 handwired/co60/rev6 - be1688eeabd83a7f576d9e4e23e24d56b8dc251b * ChibiOS conf upgrade for handwired/co60/rev7 handwired/co60/rev7 - d196c5772859ddee695bda5b0e9f0944a0f350f8 * ChibiOS conf upgrade for handwired/onekey/blackpill_f401 handwired/onekey/blackpill_f401 - 8387bfd56888fc1605d293dc0071b4ec94b23991 * ChibiOS conf upgrade for handwired/onekey/blackpill_f411 handwired/onekey/blackpill_f411 - 855efdb2f60c384edf64773c0f4ff4b7ea8ae4c9 * ChibiOS conf upgrade for handwired/onekey/bluepill handwired/onekey/bluepill - 60d8555b174dbdabae196a4cc5eccfee4bdd9529 * ChibiOS conf upgrade for handwired/onekey/stm32f0_disco handwired/onekey/stm32f0_disco - 9bc12e29f5a4e4b9ec0f34987559e5e11de4bb48 * ChibiOS conf upgrade for handwired/onekey/teensy_32 handwired/onekey/teensy_32 - 17459dd8e71b3a33270037878bdbd04151af196b * ChibiOS conf upgrade for handwired/onekey/teensy_lc handwired/onekey/teensy_lc - 3a9aed4681c287176efe31c988340ca43ad27a9d * ChibiOS conf upgrade for handwired/pill60/blackpill_f401 handwired/pill60/blackpill_f401 - 5b652354ae957e86e211dcef29f8f27320b31180 * ChibiOS conf upgrade for handwired/pill60/blackpill_f411 handwired/pill60/blackpill_f411 - 580255c171e95b5bca53b14a13ae018a73d18414 * ChibiOS conf upgrade for handwired/pill60/bluepill handwired/pill60/bluepill - 29109b54137ea94ac266c604991cff87516689ff * ChibiOS conf upgrade for handwired/riblee_f401 handwired/riblee_f401 - dc68c31d7ca8ae0fad7e7ad8bdd63406155ff363 * ChibiOS conf upgrade for handwired/riblee_f411 handwired/riblee_f411 - cf0fadff4c98d41cf9bdddbe1ead15c79be941b9 * ChibiOS conf upgrade for handwired/steamvan/rev1 handwired/steamvan/rev1 - 743b395ac87b918b6be4614c9e120e80a9f049d4 * ChibiOS conf upgrade for handwired/t111 handwired/t111 - 99b61ae5692ee4b2101673d1a896cd7a5831bcfa * ChibiOS conf upgrade for handwired/twadlee/tp69 handwired/twadlee/tp69 - 3ab2753c40e947a726ece6c825493ebc87ecf20e * ChibiOS conf upgrade for handwired/z150 handwired/z150 - 78808b0c8671e2386b9ba65dbd647d613d92f253 * ChibiOS conf upgrade for hs60/v2 hs60/v2/ansi - 7bcd152c269803de8f96416ba26e939c0420ceae hs60/v2/hhkb - d77f393d2811bd104b05c4530bf1083d75856b7a hs60/v2/iso - 5d3d20de919fca3b64cb7548cad46e8d35d7cc04 * ChibiOS conf upgrade for infinity60 infinity60 - dbcbb2f58ee499252b0879d68d9beec08a8433bc * ChibiOS conf upgrade for k_type k_type - 492f476177da95495442d1e173391e3c17324a70 * ChibiOS conf upgrade for keebio/bdn9/rev2 keebio/bdn9/rev2 - 4dbb5d606b3d9060ad01a437978220fe0f1fc5b2 * ChibiOS conf upgrade for keebio/choconum keebio/choconum - 1521e634088a30114cd12b7b6bbd2cca5331c822 * ChibiOS conf upgrade for keebwerk/mega keebwerk/mega/ansi - 10e32718c7bfff2f6bd8dd2159a15bef0f4acbf9 * ChibiOS conf upgrade for misterknife/knife66 misterknife/knife66 - cf2f3d26103036d79bf7fcec204e13899e33fbe3 * ChibiOS conf upgrade for nack nack - ba7f421d5670e672c5c14fd5f80c0f86447c1468 * ChibiOS conf upgrade for nebula12 nebula12 - aedb11fa894dc19513462f054a9fa00f5c195adc * ChibiOS conf upgrade for nebula68 nebula68 - 6bed6afb2fd84ef9069b757f1d1e87fc1cbe290c * ChibiOS conf upgrade for nemui nemui - 86ed80ea8565d7d0f39512a9032cc5e1b306fcff * ChibiOS conf upgrade for nk65 nk65 - 75b2484741a96dcbff14e94c44443bb33ad73dce * ChibiOS conf upgrade for nk87 nk87 - f719a739a3d2c0969c79c1ace5fe9a7d6f05cc22 * ChibiOS conf upgrade for peiorisboards/ixora peiorisboards/ixora - b5adf1090fb4c6278d8990ce9132727a13ca3cd7 * ChibiOS conf upgrade for phoenix phoenix - 21bfb14c52451899dadf545b78a8e88b22a420f0 * ChibiOS conf upgrade for polilla polilla - 3ba5f326b268362c9aba570b1510e1c61009ba96 * ChibiOS conf upgrade for primekb/meridian primekb/meridian - df266e25c682a8ed3318faa186805683014ccec4 * ChibiOS conf upgrade for projectkb/alice projectkb/alice - eee7210f618588b2c5c6367c8a0318427d09da52 * ChibiOS conf upgrade for projectkb/signature87 projectkb/signature87 - 617430e601981f0bb5fbcce42eee53107d5161b8 * ChibiOS conf upgrade for ramonimbao/squishy65 ramonimbao/squishy65 - 88e4cd3db8db61ccf9daed5405cf5eeb32f8043e * ChibiOS conf upgrade for ramonimbao/wete ramonimbao/wete - f0e90d943d8749e802b6bba619ce943b568a7f65 * ChibiOS conf upgrade for rart/rartlice rart/rartlice - f7a6b58e6cadd4102fcf5f89d054d1fbdc5809d0 * ChibiOS conf upgrade for retro_75 retro_75 - 34c7b291fb2443bf8cb69fb9ee676190c736bf00 * ChibiOS conf upgrade for rocketboard_16 rocketboard_16 - 24e6503a7a5259934a80dd96dd37d3281b4240d3 * ChibiOS conf upgrade for satt/vision satt/vision - c926d6433d8b2dc1d74623184255016bdd36ae22 * ChibiOS conf upgrade for tkc/candybar tkc/candybar/lefty - 2f269cbed5dcec61bb0c7904a46436f110dc0ae1 tkc/candybar/righty - 9b1448b2ccbcf8a4d1e5ad74d8ad5933003ee9a2 * ChibiOS conf upgrade for tkc/godspeed75 tkc/godspeed75 - 2cfed58d44a7eef8f341ff24e0136511e03aa78d * ChibiOS conf upgrade for tkw/stoutgat/v2/f411 tkw/stoutgat/v2/f411 - b094651ec61c79099de3e6e4991319816ac464c1 * ChibiOS conf upgrade for viktus/styrka viktus/styrka - f3f678ea55126c9965f24da6fffc9bbbd8b24aa9 * ChibiOS conf upgrade for vinta vinta - e5403dc6bbf47f35a53cf43b1b1d130f05552f16 * ChibiOS conf upgrade for westfoxtrot/prophet westfoxtrot/prophet - 0e4d6987ffa6430720804e7bc1502ab6c3dcb879 * ChibiOS conf upgrade for whitefox whitefox - 5ca6de6fb09d8c2cfa996b65732fcd55391053ff * ChibiOS conf upgrade for wolfmarkclub/wm1 wolfmarkclub/wm1 - 2d8294e29b08f5af5406988a284483d1694ed36c * ChibiOS conf upgrade for xelus/kangaroo xelus/kangaroo - f9697ba27d4e6c36a1cfd9e2657eac35dfa3be99 * ChibiOS conf upgrade for xelus/trinityxttkl xelus/trinityxttkl - a457601b446ea9b4e9e28d2ba304a4bcdb934257 * ChibiOS conf upgrade for xelus/valor_frl_tkl xelus/valor_frl_tkl - 27ec14b9ee0e5cb2d026af500d16b17d4c2885e2 * ChibiOS conf upgrade for zoo/wampus zoo/wampus - 926487c1f50c1c5eb0608ca7dc1184881d54d35e * ChibiOS conf upgrade for zvecr/split_blackpill zvecr/split_blackpill - 02f4393d01e0a70c94af48fa979ff0229732e8ca * ChibiOS conf upgrade for zvecr/zv48/f401 zvecr/zv48/f401 - 8b1766a24f943b9b0ba756c6fe340ba69d5e14e3 * ChibiOS conf upgrade for zvecr/zv48/f411 zvecr/zv48/f411 - 09ba645092eb7f3d41da0d5e6727f2f4f97033c0 --- keyboards/acheron/arctic/chconf.h | 729 +----------------- keyboards/acheron/arctic/halconf.h | 525 ------------- keyboards/acheron/arctic/mcuconf.h | 184 +---- keyboards/acheron/austin/chconf.h | 729 +----------------- keyboards/acheron/austin/halconf.h | 536 +------------ keyboards/acheron/austin/mcuconf.h | 186 +---- keyboards/acheron/keebspcb/chconf.h | 729 +----------------- keyboards/acheron/keebspcb/halconf.h | 525 ------------- keyboards/acheron/keebspcb/mcuconf.h | 184 +---- keyboards/aeboards/ext65/rev2/chconf.h | 729 +----------------- keyboards/aeboards/ext65/rev2/halconf.h | 536 +------------ keyboards/aeboards/ext65/rev2/mcuconf.h | 186 +---- keyboards/ai03/vega/chconf.h | 729 +----------------- keyboards/ai03/vega/halconf.h | 525 ------------- keyboards/ai03/vega/mcuconf.h | 176 ----- keyboards/at_at/660m/chconf.h | 729 +----------------- keyboards/at_at/660m/halconf.h | 536 +------------ keyboards/at_at/660m/mcuconf.h | 186 +---- keyboards/bt66tech/bt66tech60/chconf.h | 729 +----------------- keyboards/bt66tech/bt66tech60/halconf.h | 536 +------------ keyboards/bt66tech/bt66tech60/mcuconf.h | 217 +----- keyboards/cannonkeys/an_c/chconf.h | 729 +----------------- keyboards/cannonkeys/an_c/halconf.h | 536 +------------ keyboards/cannonkeys/an_c/mcuconf.h | 186 +---- keyboards/cannonkeys/atlas/chconf.h | 729 +----------------- keyboards/cannonkeys/atlas/halconf.h | 536 +------------ keyboards/cannonkeys/atlas/mcuconf.h | 186 +---- keyboards/cannonkeys/chimera65/chconf.h | 729 +----------------- keyboards/cannonkeys/chimera65/halconf.h | 536 +------------ keyboards/cannonkeys/chimera65/mcuconf.h | 186 +---- keyboards/cannonkeys/db60/chconf.h | 729 +----------------- keyboards/cannonkeys/db60/halconf.h | 536 +------------ keyboards/cannonkeys/db60/mcuconf.h | 186 +---- keyboards/cannonkeys/devastatingtkl/chconf.h | 729 +----------------- keyboards/cannonkeys/devastatingtkl/halconf.h | 536 +------------ keyboards/cannonkeys/devastatingtkl/mcuconf.h | 186 +---- keyboards/cannonkeys/instant60/chconf.h | 729 +----------------- keyboards/cannonkeys/instant60/halconf.h | 536 +------------ keyboards/cannonkeys/instant60/mcuconf.h | 186 +---- keyboards/cannonkeys/instant65/chconf.h | 729 +----------------- keyboards/cannonkeys/instant65/halconf.h | 536 +------------ keyboards/cannonkeys/instant65/mcuconf.h | 185 +---- keyboards/cannonkeys/iron165/chconf.h | 729 +----------------- keyboards/cannonkeys/iron165/halconf.h | 536 +------------ keyboards/cannonkeys/iron165/mcuconf.h | 184 +---- keyboards/cannonkeys/obliterated75/chconf.h | 729 +----------------- keyboards/cannonkeys/obliterated75/halconf.h | 536 +------------ keyboards/cannonkeys/obliterated75/mcuconf.h | 185 +---- keyboards/cannonkeys/ortho48/chconf.h | 729 +----------------- keyboards/cannonkeys/ortho48/halconf.h | 536 +------------ keyboards/cannonkeys/ortho48/mcuconf.h | 217 +----- keyboards/cannonkeys/ortho60/chconf.h | 729 +----------------- keyboards/cannonkeys/ortho60/halconf.h | 536 +------------ keyboards/cannonkeys/ortho60/mcuconf.h | 217 +----- keyboards/cannonkeys/ortho75/chconf.h | 729 +----------------- keyboards/cannonkeys/ortho75/halconf.h | 536 +------------ keyboards/cannonkeys/ortho75/mcuconf.h | 217 +----- keyboards/cannonkeys/practice60/chconf.h | 729 +----------------- keyboards/cannonkeys/practice60/halconf.h | 536 +------------ keyboards/cannonkeys/practice60/mcuconf.h | 217 +----- keyboards/cannonkeys/practice65/chconf.h | 729 +----------------- keyboards/cannonkeys/practice65/halconf.h | 536 +------------ keyboards/cannonkeys/practice65/mcuconf.h | 217 +----- keyboards/cannonkeys/rekt1800/chconf.h | 729 +----------------- keyboards/cannonkeys/rekt1800/halconf.h | 536 +------------ keyboards/cannonkeys/rekt1800/mcuconf.h | 185 +---- keyboards/cannonkeys/satisfaction75/chconf.h | 729 +----------------- keyboards/cannonkeys/satisfaction75/halconf.h | 536 +------------ keyboards/cannonkeys/satisfaction75/mcuconf.h | 187 +---- keyboards/cannonkeys/savage65/chconf.h | 729 +----------------- keyboards/cannonkeys/savage65/halconf.h | 536 +------------ keyboards/cannonkeys/savage65/mcuconf.h | 185 +---- keyboards/cannonkeys/tmov2/chconf.h | 729 +----------------- keyboards/cannonkeys/tmov2/halconf.h | 536 +------------ keyboards/cannonkeys/tmov2/mcuconf.h | 186 +---- keyboards/chavdai40/chconf.h | 729 +----------------- keyboards/chavdai40/halconf.h | 536 +------------ keyboards/chavdai40/mcuconf.h | 198 +---- keyboards/cheshire/curiosity/chconf.h | 729 +----------------- keyboards/cheshire/curiosity/halconf.h | 525 ------------- keyboards/cheshire/curiosity/mcuconf.h | 171 ---- keyboards/clueboard/60/chconf.h | 714 ----------------- keyboards/clueboard/60/halconf.h | 536 +------------ keyboards/clueboard/60/mcuconf.h | 286 +------ keyboards/clueboard/66/rev4/chconf.h | 714 ----------------- keyboards/clueboard/66/rev4/halconf.h | 536 +------------ keyboards/clueboard/66/rev4/mcuconf.h | 286 +------ keyboards/clueboard/66_hotswap/gen1/chconf.h | 714 ----------------- keyboards/clueboard/66_hotswap/gen1/halconf.h | 536 +------------ keyboards/clueboard/66_hotswap/gen1/mcuconf.h | 285 +------ keyboards/coarse/cordillera/chconf.h | 729 +----------------- keyboards/coarse/cordillera/halconf.h | 536 +------------ keyboards/coarse/cordillera/mcuconf.h | 185 +---- keyboards/converter/siemens_tastatur/chconf.h | 729 +----------------- .../converter/siemens_tastatur/halconf.h | 536 +------------ .../converter/siemens_tastatur/mcuconf.h | 209 ----- keyboards/ergodox_infinity/chconf.h | 729 +----------------- keyboards/ergodox_infinity/halconf.h | 536 +------------ keyboards/function96/chconf.h | 726 +---------------- keyboards/function96/halconf.h | 533 +------------ keyboards/function96/mcuconf.h | 176 +---- keyboards/generic_panda/panda65_01/chconf.h | 726 +---------------- keyboards/generic_panda/panda65_01/halconf.h | 533 +------------ keyboards/generic_panda/panda65_01/mcuconf.h | 176 +---- keyboards/hadron/ver3/chconf.h | 729 +----------------- keyboards/hadron/ver3/halconf.h | 536 +------------ keyboards/hadron/ver3/mcuconf.h | 286 +------ keyboards/handwired/ck4x4/chconf.h | 729 +----------------- keyboards/handwired/ck4x4/halconf.h | 525 ------------- keyboards/handwired/ck4x4/mcuconf.h | 171 ---- keyboards/handwired/co60/rev6/chconf.h | 714 ----------------- keyboards/handwired/co60/rev6/halconf.h | 536 +------------ keyboards/handwired/co60/rev6/mcuconf.h | 284 +------ keyboards/handwired/co60/rev7/chconf.h | 714 ----------------- keyboards/handwired/co60/rev7/halconf.h | 536 +------------ keyboards/handwired/co60/rev7/mcuconf.h | 285 +------ .../handwired/onekey/blackpill_f401/chconf.h | 729 +----------------- .../handwired/onekey/blackpill_f411/chconf.h | 729 +----------------- keyboards/handwired/onekey/bluepill/chconf.h | 729 +----------------- keyboards/handwired/onekey/bluepill/halconf.h | 536 +------------ keyboards/handwired/onekey/bluepill/mcuconf.h | 218 +----- .../handwired/onekey/stm32f0_disco/chconf.h | 729 +----------------- .../handwired/onekey/stm32f0_disco/halconf.h | 536 +------------ .../handwired/onekey/stm32f0_disco/mcuconf.h | 179 +---- keyboards/handwired/onekey/teensy_32/chconf.h | 729 +----------------- .../handwired/onekey/teensy_32/halconf.h | 536 +------------ keyboards/handwired/onekey/teensy_lc/chconf.h | 729 +----------------- .../handwired/onekey/teensy_lc/halconf.h | 536 +------------ .../handwired/pill60/blackpill_f401/chconf.h | 729 +----------------- .../handwired/pill60/blackpill_f411/chconf.h | 729 +----------------- keyboards/handwired/pill60/bluepill/chconf.h | 726 +---------------- keyboards/handwired/pill60/bluepill/halconf.h | 536 +------------ keyboards/handwired/pill60/bluepill/mcuconf.h | 219 +----- keyboards/handwired/riblee_f401/chconf.h | 729 +----------------- keyboards/handwired/riblee_f401/halconf.h | 536 +------------ keyboards/handwired/riblee_f401/mcuconf.h | 253 ------ keyboards/handwired/riblee_f411/chconf.h | 729 +----------------- keyboards/handwired/steamvan/rev1/chconf.h | 714 ----------------- keyboards/handwired/steamvan/rev1/halconf.h | 536 +------------ keyboards/handwired/steamvan/rev1/mcuconf.h | 285 +------ keyboards/handwired/t111/chconf.h | 729 +----------------- keyboards/handwired/t111/halconf.h | 536 +------------ keyboards/handwired/t111/mcuconf.h | 218 +----- keyboards/handwired/twadlee/tp69/chconf.h | 703 ++--------------- keyboards/handwired/twadlee/tp69/halconf.h | 524 ------------- keyboards/handwired/z150/chconf.h | 729 +----------------- keyboards/handwired/z150/halconf.h | 536 +------------ keyboards/handwired/z150/mcuconf.h | 218 +----- keyboards/hs60/v2/chconf.h | 714 ----------------- keyboards/hs60/v2/halconf.h | 536 +------------ keyboards/hs60/v2/mcuconf.h | 286 +------ keyboards/infinity60/chconf.h | 729 +----------------- keyboards/infinity60/halconf.h | 536 +------------ keyboards/k_type/chconf.h | 729 +----------------- keyboards/k_type/halconf.h | 536 +------------ keyboards/keebio/bdn9/rev2/chconf.h | 729 +----------------- keyboards/keebio/bdn9/rev2/halconf.h | 536 +------------ keyboards/keebio/bdn9/rev2/mcuconf.h | 184 +---- keyboards/keebio/choconum/chconf.h | 729 +----------------- keyboards/keebio/choconum/halconf.h | 536 +------------ keyboards/keebio/choconum/mcuconf.h | 184 +---- keyboards/keebwerk/mega/chconf.h | 729 +----------------- keyboards/keebwerk/mega/halconf.h | 536 +------------ keyboards/keebwerk/mega/mcuconf.h | 287 +------ keyboards/misterknife/knife66/chconf.h | 729 +----------------- keyboards/misterknife/knife66/halconf.h | 536 +------------ keyboards/misterknife/knife66/mcuconf.h | 186 +---- keyboards/nack/mcuconf.h | 282 +------ keyboards/nebula12/chconf.h | 729 +----------------- keyboards/nebula12/halconf.h | 536 +------------ keyboards/nebula12/mcuconf.h | 186 +---- keyboards/nebula68/chconf.h | 714 ----------------- keyboards/nebula68/halconf.h | 536 +------------ keyboards/nebula68/mcuconf.h | 285 +------ keyboards/nemui/chconf.h | 729 +----------------- keyboards/nemui/halconf.h | 536 +------------ keyboards/nemui/mcuconf.h | 186 +---- keyboards/nk65/chconf.h | 714 ----------------- keyboards/nk65/halconf.h | 536 +------------ keyboards/nk65/mcuconf.h | 286 +------ keyboards/nk87/chconf.h | 714 ----------------- keyboards/nk87/halconf.h | 536 +------------ keyboards/nk87/mcuconf.h | 286 +------ keyboards/peiorisboards/ixora/chconf.h | 729 +----------------- keyboards/peiorisboards/ixora/halconf.h | 536 +------------ keyboards/peiorisboards/ixora/mcuconf.h | 168 ---- keyboards/phoenix/chconf.h | 729 +----------------- keyboards/phoenix/halconf.h | 536 +------------ keyboards/phoenix/mcuconf.h | 261 +------ keyboards/polilla/chconf.h | 726 +---------------- keyboards/polilla/halconf.h | 536 +------------ keyboards/polilla/mcuconf.h | 195 +---- keyboards/primekb/meridian/chconf.h | 729 +----------------- keyboards/primekb/meridian/halconf.h | 536 +------------ keyboards/primekb/meridian/mcuconf.h | 186 +---- keyboards/projectkb/alice/chconf.h | 729 +----------------- keyboards/projectkb/alice/halconf.h | 536 +------------ keyboards/projectkb/alice/mcuconf.h | 186 +---- keyboards/projectkb/signature87/chconf.h | 729 +----------------- keyboards/projectkb/signature87/halconf.h | 536 +------------ keyboards/projectkb/signature87/mcuconf.h | 186 +---- keyboards/ramonimbao/squishy65/chconf.h | 729 +----------------- keyboards/ramonimbao/squishy65/halconf.h | 536 +------------ keyboards/ramonimbao/squishy65/mcuconf.h | 187 +---- keyboards/ramonimbao/wete/chconf.h | 729 +----------------- keyboards/ramonimbao/wete/halconf.h | 536 +------------ keyboards/ramonimbao/wete/mcuconf.h | 187 +---- keyboards/rart/rartlice/chconf.h | 726 +---------------- keyboards/rart/rartlice/halconf.h | 533 +------------ keyboards/rart/rartlice/mcuconf.h | 215 +----- keyboards/retro_75/chconf.h | 729 +----------------- keyboards/retro_75/halconf.h | 525 ------------- keyboards/retro_75/mcuconf.h | 171 ---- keyboards/rocketboard_16/chconf.h | 729 +----------------- keyboards/rocketboard_16/halconf.h | 536 +------------ keyboards/rocketboard_16/mcuconf.h | 222 +----- keyboards/satt/vision/chconf.h | 729 +----------------- keyboards/satt/vision/halconf.h | 525 ------------- keyboards/satt/vision/mcuconf.h | 184 +---- keyboards/tkc/candybar/chconf.h | 729 +----------------- keyboards/tkc/candybar/halconf.h | 525 ------------- keyboards/tkc/candybar/mcuconf.h | 171 ---- keyboards/tkc/godspeed75/chconf.h | 729 +----------------- keyboards/tkc/godspeed75/halconf.h | 525 ------------- keyboards/tkc/godspeed75/mcuconf.h | 171 ---- keyboards/tkw/stoutgat/v2/f411/chconf.h | 729 +----------------- keyboards/tkw/stoutgat/v2/f411/halconf.h | 536 +------------ keyboards/tkw/stoutgat/v2/f411/mcuconf.h | 262 +------ keyboards/viktus/styrka/chconf.h | 729 +----------------- keyboards/viktus/styrka/halconf.h | 525 ------------- keyboards/viktus/styrka/mcuconf.h | 171 ---- keyboards/vinta/chconf.h | 729 +----------------- keyboards/vinta/halconf.h | 536 +------------ keyboards/vinta/mcuconf.h | 168 ---- keyboards/westfoxtrot/prophet/chconf.h | 729 +----------------- keyboards/westfoxtrot/prophet/halconf.h | 525 ------------- keyboards/westfoxtrot/prophet/mcuconf.h | 184 +---- keyboards/whitefox/chconf.h | 729 +----------------- keyboards/whitefox/halconf.h | 536 +------------ keyboards/wolfmarkclub/wm1/chconf.h | 729 +----------------- keyboards/wolfmarkclub/wm1/halconf.h | 536 +------------ keyboards/wolfmarkclub/wm1/mcuconf.h | 218 +----- keyboards/xelus/kangaroo/chconf.h | 729 +----------------- keyboards/xelus/kangaroo/halconf.h | 536 +------------ keyboards/xelus/kangaroo/mcuconf.h | 184 +---- keyboards/xelus/trinityxttkl/chconf.h | 729 +----------------- keyboards/xelus/trinityxttkl/halconf.h | 525 ------------- keyboards/xelus/trinityxttkl/mcuconf.h | 184 +---- keyboards/xelus/valor_frl_tkl/chconf.h | 729 +----------------- keyboards/xelus/valor_frl_tkl/halconf.h | 536 +------------ keyboards/xelus/valor_frl_tkl/mcuconf.h | 184 +---- keyboards/zoo/wampus/chconf.h | 729 +----------------- keyboards/zoo/wampus/halconf.h | 536 +------------ keyboards/zoo/wampus/mcuconf.h | 186 +---- keyboards/zvecr/split_blackpill/chconf.h | 729 +----------------- keyboards/zvecr/split_blackpill/halconf.h | 536 +------------ keyboards/zvecr/split_blackpill/mcuconf.h | 219 +----- keyboards/zvecr/zv48/f401/chconf.h | 729 +----------------- keyboards/zvecr/zv48/f401/halconf.h | 536 +------------ keyboards/zvecr/zv48/f401/mcuconf.h | 262 +------ keyboards/zvecr/zv48/f411/chconf.h | 729 +----------------- keyboards/zvecr/zv48/f411/halconf.h | 536 +------------ keyboards/zvecr/zv48/f411/mcuconf.h | 262 +------ 263 files changed, 5549 insertions(+), 126289 deletions(-) delete mode 100644 keyboards/acheron/arctic/halconf.h delete mode 100644 keyboards/acheron/keebspcb/halconf.h delete mode 100644 keyboards/ai03/vega/halconf.h delete mode 100644 keyboards/ai03/vega/mcuconf.h delete mode 100644 keyboards/cheshire/curiosity/halconf.h delete mode 100644 keyboards/cheshire/curiosity/mcuconf.h delete mode 100644 keyboards/clueboard/60/chconf.h delete mode 100644 keyboards/clueboard/66/rev4/chconf.h delete mode 100644 keyboards/clueboard/66_hotswap/gen1/chconf.h delete mode 100644 keyboards/converter/siemens_tastatur/mcuconf.h delete mode 100644 keyboards/handwired/ck4x4/halconf.h delete mode 100644 keyboards/handwired/ck4x4/mcuconf.h delete mode 100644 keyboards/handwired/co60/rev6/chconf.h delete mode 100644 keyboards/handwired/co60/rev7/chconf.h delete mode 100644 keyboards/handwired/riblee_f401/mcuconf.h delete mode 100644 keyboards/handwired/steamvan/rev1/chconf.h delete mode 100644 keyboards/handwired/twadlee/tp69/halconf.h delete mode 100644 keyboards/hs60/v2/chconf.h delete mode 100644 keyboards/nebula68/chconf.h delete mode 100644 keyboards/nk65/chconf.h delete mode 100644 keyboards/nk87/chconf.h delete mode 100644 keyboards/peiorisboards/ixora/mcuconf.h delete mode 100644 keyboards/retro_75/halconf.h delete mode 100644 keyboards/retro_75/mcuconf.h delete mode 100644 keyboards/satt/vision/halconf.h delete mode 100644 keyboards/tkc/candybar/halconf.h delete mode 100644 keyboards/tkc/candybar/mcuconf.h delete mode 100644 keyboards/tkc/godspeed75/halconf.h delete mode 100644 keyboards/tkc/godspeed75/mcuconf.h delete mode 100644 keyboards/viktus/styrka/halconf.h delete mode 100644 keyboards/viktus/styrka/mcuconf.h delete mode 100644 keyboards/vinta/mcuconf.h delete mode 100644 keyboards/westfoxtrot/prophet/halconf.h delete mode 100644 keyboards/xelus/trinityxttkl/halconf.h diff --git a/keyboards/acheron/arctic/chconf.h b/keyboards/acheron/arctic/chconf.h index 4640ff5332b..78810ead1db 100644 --- a/keyboards/acheron/arctic/chconf.h +++ b/keyboards/acheron/arctic/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/arctic/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/acheron/arctic/halconf.h b/keyboards/acheron/arctic/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/acheron/arctic/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/acheron/arctic/mcuconf.h b/keyboards/acheron/arctic/mcuconf.h index 6289be66dad..7f441ae164f 100644 --- a/keyboards/acheron/arctic/mcuconf.h +++ b/keyboards/acheron/arctic/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/arctic/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/acheron/austin/chconf.h b/keyboards/acheron/austin/chconf.h index 03f63da36a8..c132622465b 100644 --- a/keyboards/acheron/austin/chconf.h +++ b/keyboards/acheron/austin/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/austin/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/acheron/austin/halconf.h b/keyboards/acheron/austin/halconf.h index adb1a907154..517dd459f23 100644 --- a/keyboards/acheron/austin/halconf.h +++ b/keyboards/acheron/austin/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/austin/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/acheron/austin/mcuconf.h b/keyboards/acheron/austin/mcuconf.h index 048eb4df650..8e51e61bbfa 100644 --- a/keyboards/acheron/austin/mcuconf.h +++ b/keyboards/acheron/austin/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/austin/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/acheron/keebspcb/chconf.h b/keyboards/acheron/keebspcb/chconf.h index 03f63da36a8..3c7eeaac61e 100644 --- a/keyboards/acheron/keebspcb/chconf.h +++ b/keyboards/acheron/keebspcb/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/keebspcb/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/acheron/keebspcb/halconf.h b/keyboards/acheron/keebspcb/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/acheron/keebspcb/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/acheron/keebspcb/mcuconf.h b/keyboards/acheron/keebspcb/mcuconf.h index 6289be66dad..dd29ee9b5d1 100644 --- a/keyboards/acheron/keebspcb/mcuconf.h +++ b/keyboards/acheron/keebspcb/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/keebspcb/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/aeboards/ext65/rev2/chconf.h b/keyboards/aeboards/ext65/rev2/chconf.h index 4640ff5332b..4d6cc3f56ca 100644 --- a/keyboards/aeboards/ext65/rev2/chconf.h +++ b/keyboards/aeboards/ext65/rev2/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/aeboards/ext65/rev2/halconf.h b/keyboards/aeboards/ext65/rev2/halconf.h index adb1a907154..f6f2e70aba4 100644 --- a/keyboards/aeboards/ext65/rev2/halconf.h +++ b/keyboards/aeboards/ext65/rev2/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/aeboards/ext65/rev2/mcuconf.h b/keyboards/aeboards/ext65/rev2/mcuconf.h index 048eb4df650..dda2bda0806 100644 --- a/keyboards/aeboards/ext65/rev2/mcuconf.h +++ b/keyboards/aeboards/ext65/rev2/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/ai03/vega/chconf.h b/keyboards/ai03/vega/chconf.h index 03f63da36a8..34669b16f83 100644 --- a/keyboards/ai03/vega/chconf.h +++ b/keyboards/ai03/vega/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ai03/vega/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ai03/vega/halconf.h b/keyboards/ai03/vega/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/ai03/vega/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/ai03/vega/mcuconf.h b/keyboards/ai03/vega/mcuconf.h deleted file mode 100644 index 4ff1fd7ffe4..00000000000 --- a/keyboards/ai03/vega/mcuconf.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF -// #define STM32F070xB - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/at_at/660m/chconf.h b/keyboards/at_at/660m/chconf.h index 03f63da36a8..dbb520560df 100644 --- a/keyboards/at_at/660m/chconf.h +++ b/keyboards/at_at/660m/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/at_at/660m/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/at_at/660m/halconf.h b/keyboards/at_at/660m/halconf.h index adb1a907154..ab884e44dbe 100644 --- a/keyboards/at_at/660m/halconf.h +++ b/keyboards/at_at/660m/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/at_at/660m/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/at_at/660m/mcuconf.h b/keyboards/at_at/660m/mcuconf.h index 048eb4df650..2f81c14bdd5 100644 --- a/keyboards/at_at/660m/mcuconf.h +++ b/keyboards/at_at/660m/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/at_at/660m/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/bt66tech/bt66tech60/chconf.h b/keyboards/bt66tech/bt66tech60/chconf.h index f5e471640c5..0a0e97dbade 100644 --- a/keyboards/bt66tech/bt66tech60/chconf.h +++ b/keyboards/bt66tech/bt66tech60/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/bt66tech/bt66tech60/halconf.h b/keyboards/bt66tech/bt66tech60/halconf.h index 921803762ea..c19f57b9bee 100644 --- a/keyboards/bt66tech/bt66tech60/halconf.h +++ b/keyboards/bt66tech/bt66tech60/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/bt66tech/bt66tech60/mcuconf.h b/keyboards/bt66tech/bt66tech60/mcuconf.h index fced27289e0..b5699553f85 100644 --- a/keyboards/bt66tech/bt66tech60/mcuconf.h +++ b/keyboards/bt66tech/bt66tech60/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/an_c/chconf.h b/keyboards/cannonkeys/an_c/chconf.h index 03f63da36a8..a928b5b7982 100644 --- a/keyboards/cannonkeys/an_c/chconf.h +++ b/keyboards/cannonkeys/an_c/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/an_c/halconf.h b/keyboards/cannonkeys/an_c/halconf.h index adb1a907154..c4b2eb4d619 100644 --- a/keyboards/cannonkeys/an_c/halconf.h +++ b/keyboards/cannonkeys/an_c/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/an_c/mcuconf.h b/keyboards/cannonkeys/an_c/mcuconf.h index 048eb4df650..9fade649695 100644 --- a/keyboards/cannonkeys/an_c/mcuconf.h +++ b/keyboards/cannonkeys/an_c/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/atlas/chconf.h b/keyboards/cannonkeys/atlas/chconf.h index 03f63da36a8..2eafdda972c 100644 --- a/keyboards/cannonkeys/atlas/chconf.h +++ b/keyboards/cannonkeys/atlas/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/atlas/halconf.h b/keyboards/cannonkeys/atlas/halconf.h index adb1a907154..4885913a858 100644 --- a/keyboards/cannonkeys/atlas/halconf.h +++ b/keyboards/cannonkeys/atlas/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/atlas/mcuconf.h b/keyboards/cannonkeys/atlas/mcuconf.h index 048eb4df650..a3a3972ba90 100644 --- a/keyboards/cannonkeys/atlas/mcuconf.h +++ b/keyboards/cannonkeys/atlas/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/chimera65/chconf.h b/keyboards/cannonkeys/chimera65/chconf.h index 03f63da36a8..4c0f3da3f41 100644 --- a/keyboards/cannonkeys/chimera65/chconf.h +++ b/keyboards/cannonkeys/chimera65/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/chimera65/halconf.h b/keyboards/cannonkeys/chimera65/halconf.h index a406166756c..149ff63aded 100644 --- a/keyboards/cannonkeys/chimera65/halconf.h +++ b/keyboards/cannonkeys/chimera65/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/chimera65/mcuconf.h b/keyboards/cannonkeys/chimera65/mcuconf.h index 048eb4df650..85928a89896 100644 --- a/keyboards/cannonkeys/chimera65/mcuconf.h +++ b/keyboards/cannonkeys/chimera65/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/db60/chconf.h b/keyboards/cannonkeys/db60/chconf.h index 03f63da36a8..05641eee533 100644 --- a/keyboards/cannonkeys/db60/chconf.h +++ b/keyboards/cannonkeys/db60/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/db60/halconf.h b/keyboards/cannonkeys/db60/halconf.h index adb1a907154..044cd6daeea 100644 --- a/keyboards/cannonkeys/db60/halconf.h +++ b/keyboards/cannonkeys/db60/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/db60/mcuconf.h b/keyboards/cannonkeys/db60/mcuconf.h index 048eb4df650..19322976601 100644 --- a/keyboards/cannonkeys/db60/mcuconf.h +++ b/keyboards/cannonkeys/db60/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/devastatingtkl/chconf.h b/keyboards/cannonkeys/devastatingtkl/chconf.h index 03f63da36a8..6366e11089d 100644 --- a/keyboards/cannonkeys/devastatingtkl/chconf.h +++ b/keyboards/cannonkeys/devastatingtkl/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/devastatingtkl/halconf.h b/keyboards/cannonkeys/devastatingtkl/halconf.h index adb1a907154..296dbe55f5b 100644 --- a/keyboards/cannonkeys/devastatingtkl/halconf.h +++ b/keyboards/cannonkeys/devastatingtkl/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/devastatingtkl/mcuconf.h b/keyboards/cannonkeys/devastatingtkl/mcuconf.h index 048eb4df650..eabe82b77c5 100644 --- a/keyboards/cannonkeys/devastatingtkl/mcuconf.h +++ b/keyboards/cannonkeys/devastatingtkl/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h index 03f63da36a8..3bd24c20be4 100644 --- a/keyboards/cannonkeys/instant60/chconf.h +++ b/keyboards/cannonkeys/instant60/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/instant60/halconf.h b/keyboards/cannonkeys/instant60/halconf.h index adb1a907154..56635c44f23 100644 --- a/keyboards/cannonkeys/instant60/halconf.h +++ b/keyboards/cannonkeys/instant60/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/instant60/mcuconf.h b/keyboards/cannonkeys/instant60/mcuconf.h index 048eb4df650..5d9d4bcc01b 100644 --- a/keyboards/cannonkeys/instant60/mcuconf.h +++ b/keyboards/cannonkeys/instant60/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/instant65/chconf.h b/keyboards/cannonkeys/instant65/chconf.h index 03f63da36a8..b26cf9a26cb 100644 --- a/keyboards/cannonkeys/instant65/chconf.h +++ b/keyboards/cannonkeys/instant65/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/instant65/halconf.h b/keyboards/cannonkeys/instant65/halconf.h index 921803762ea..89c174e6ca5 100644 --- a/keyboards/cannonkeys/instant65/halconf.h +++ b/keyboards/cannonkeys/instant65/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/instant65/mcuconf.h b/keyboards/cannonkeys/instant65/mcuconf.h index 43fe0a462ef..649f9c97ddf 100644 --- a/keyboards/cannonkeys/instant65/mcuconf.h +++ b/keyboards/cannonkeys/instant65/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/iron165/chconf.h b/keyboards/cannonkeys/iron165/chconf.h index 03f63da36a8..c78b608f107 100644 --- a/keyboards/cannonkeys/iron165/chconf.h +++ b/keyboards/cannonkeys/iron165/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/iron165/halconf.h b/keyboards/cannonkeys/iron165/halconf.h index ff5ae7e8a5f..c79413423f0 100644 --- a/keyboards/cannonkeys/iron165/halconf.h +++ b/keyboards/cannonkeys/iron165/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/iron165/mcuconf.h b/keyboards/cannonkeys/iron165/mcuconf.h index 0e49478c8b0..816636b7523 100644 --- a/keyboards/cannonkeys/iron165/mcuconf.h +++ b/keyboards/cannonkeys/iron165/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/obliterated75/chconf.h b/keyboards/cannonkeys/obliterated75/chconf.h index 03f63da36a8..bff56e52d73 100644 --- a/keyboards/cannonkeys/obliterated75/chconf.h +++ b/keyboards/cannonkeys/obliterated75/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/halconf.h b/keyboards/cannonkeys/obliterated75/halconf.h index 921803762ea..37f33e7d62b 100644 --- a/keyboards/cannonkeys/obliterated75/halconf.h +++ b/keyboards/cannonkeys/obliterated75/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/mcuconf.h b/keyboards/cannonkeys/obliterated75/mcuconf.h index 43fe0a462ef..2f0e615ff94 100644 --- a/keyboards/cannonkeys/obliterated75/mcuconf.h +++ b/keyboards/cannonkeys/obliterated75/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/ortho48/chconf.h b/keyboards/cannonkeys/ortho48/chconf.h index f5e471640c5..8dbde4e5a4f 100644 --- a/keyboards/cannonkeys/ortho48/chconf.h +++ b/keyboards/cannonkeys/ortho48/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/ortho48/halconf.h b/keyboards/cannonkeys/ortho48/halconf.h index 921803762ea..7c235fe5811 100644 --- a/keyboards/cannonkeys/ortho48/halconf.h +++ b/keyboards/cannonkeys/ortho48/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho48/mcuconf.h b/keyboards/cannonkeys/ortho48/mcuconf.h index fced27289e0..8239c670e96 100644 --- a/keyboards/cannonkeys/ortho48/mcuconf.h +++ b/keyboards/cannonkeys/ortho48/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/ortho60/chconf.h b/keyboards/cannonkeys/ortho60/chconf.h index f5e471640c5..88e20f62ea2 100644 --- a/keyboards/cannonkeys/ortho60/chconf.h +++ b/keyboards/cannonkeys/ortho60/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/ortho60/halconf.h b/keyboards/cannonkeys/ortho60/halconf.h index 921803762ea..f72a3964399 100644 --- a/keyboards/cannonkeys/ortho60/halconf.h +++ b/keyboards/cannonkeys/ortho60/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho60/mcuconf.h b/keyboards/cannonkeys/ortho60/mcuconf.h index fced27289e0..8597641da6a 100644 --- a/keyboards/cannonkeys/ortho60/mcuconf.h +++ b/keyboards/cannonkeys/ortho60/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/ortho75/chconf.h b/keyboards/cannonkeys/ortho75/chconf.h index f5e471640c5..60ff8ca92df 100644 --- a/keyboards/cannonkeys/ortho75/chconf.h +++ b/keyboards/cannonkeys/ortho75/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/ortho75/halconf.h b/keyboards/cannonkeys/ortho75/halconf.h index 921803762ea..bc62a5a3d93 100644 --- a/keyboards/cannonkeys/ortho75/halconf.h +++ b/keyboards/cannonkeys/ortho75/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/ortho75/mcuconf.h b/keyboards/cannonkeys/ortho75/mcuconf.h index fced27289e0..f6748252711 100644 --- a/keyboards/cannonkeys/ortho75/mcuconf.h +++ b/keyboards/cannonkeys/ortho75/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/practice60/chconf.h b/keyboards/cannonkeys/practice60/chconf.h index f5e471640c5..f52b4a8aeeb 100644 --- a/keyboards/cannonkeys/practice60/chconf.h +++ b/keyboards/cannonkeys/practice60/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/practice60/halconf.h b/keyboards/cannonkeys/practice60/halconf.h index 921803762ea..09ae00a5489 100644 --- a/keyboards/cannonkeys/practice60/halconf.h +++ b/keyboards/cannonkeys/practice60/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice60/mcuconf.h b/keyboards/cannonkeys/practice60/mcuconf.h index fced27289e0..bd7b8a3595a 100644 --- a/keyboards/cannonkeys/practice60/mcuconf.h +++ b/keyboards/cannonkeys/practice60/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/practice65/chconf.h b/keyboards/cannonkeys/practice65/chconf.h index f5e471640c5..220ad6436c2 100644 --- a/keyboards/cannonkeys/practice65/chconf.h +++ b/keyboards/cannonkeys/practice65/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/practice65/halconf.h b/keyboards/cannonkeys/practice65/halconf.h index 921803762ea..27b46b0f9e6 100644 --- a/keyboards/cannonkeys/practice65/halconf.h +++ b/keyboards/cannonkeys/practice65/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/practice65/mcuconf.h b/keyboards/cannonkeys/practice65/mcuconf.h index fced27289e0..e405bd5a1ae 100644 --- a/keyboards/cannonkeys/practice65/mcuconf.h +++ b/keyboards/cannonkeys/practice65/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/rekt1800/chconf.h b/keyboards/cannonkeys/rekt1800/chconf.h index 03f63da36a8..3b03625ff24 100644 --- a/keyboards/cannonkeys/rekt1800/chconf.h +++ b/keyboards/cannonkeys/rekt1800/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/rekt1800/halconf.h b/keyboards/cannonkeys/rekt1800/halconf.h index 921803762ea..c065e8fae4c 100644 --- a/keyboards/cannonkeys/rekt1800/halconf.h +++ b/keyboards/cannonkeys/rekt1800/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/rekt1800/mcuconf.h b/keyboards/cannonkeys/rekt1800/mcuconf.h index 43fe0a462ef..d19075da35f 100644 --- a/keyboards/cannonkeys/rekt1800/mcuconf.h +++ b/keyboards/cannonkeys/rekt1800/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/satisfaction75/chconf.h b/keyboards/cannonkeys/satisfaction75/chconf.h index 03f63da36a8..8bd371f8652 100644 --- a/keyboards/cannonkeys/satisfaction75/chconf.h +++ b/keyboards/cannonkeys/satisfaction75/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/halconf.h b/keyboards/cannonkeys/satisfaction75/halconf.h index 7347a42536a..9ff2015c55d 100644 --- a/keyboards/cannonkeys/satisfaction75/halconf.h +++ b/keyboards/cannonkeys/satisfaction75/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_RTC TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/satisfaction75/mcuconf.h b/keyboards/cannonkeys/satisfaction75/mcuconf.h index b39e3351345..9848bbd87e2 100644 --- a/keyboards/cannonkeys/satisfaction75/mcuconf.h +++ b/keyboards/cannonkeys/satisfaction75/mcuconf.h @@ -1,177 +1,40 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE + +#pragma once + +#include_next + +#undef STM32_LSE_ENABLED #define STM32_LSE_ENABLED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK + +#undef STM32_RTCSEL #define STM32_RTCSEL STM32_RTCSEL_LSE -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ +#undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE +#undef STM32_PWM_USE_TIM3 #define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE +#undef STM32_SPI_USE_SPI2 #define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/savage65/chconf.h b/keyboards/cannonkeys/savage65/chconf.h index 03f63da36a8..aef07cbc6d1 100644 --- a/keyboards/cannonkeys/savage65/chconf.h +++ b/keyboards/cannonkeys/savage65/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/savage65/halconf.h b/keyboards/cannonkeys/savage65/halconf.h index 921803762ea..8bcdfe258c2 100644 --- a/keyboards/cannonkeys/savage65/halconf.h +++ b/keyboards/cannonkeys/savage65/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/savage65/mcuconf.h b/keyboards/cannonkeys/savage65/mcuconf.h index 43fe0a462ef..c23f7e22d5e 100644 --- a/keyboards/cannonkeys/savage65/mcuconf.h +++ b/keyboards/cannonkeys/savage65/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/tmov2/chconf.h b/keyboards/cannonkeys/tmov2/chconf.h index 03f63da36a8..ae7c2f3a6ec 100644 --- a/keyboards/cannonkeys/tmov2/chconf.h +++ b/keyboards/cannonkeys/tmov2/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/tmov2/halconf.h b/keyboards/cannonkeys/tmov2/halconf.h index adb1a907154..8aec08db04f 100644 --- a/keyboards/cannonkeys/tmov2/halconf.h +++ b/keyboards/cannonkeys/tmov2/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/tmov2/mcuconf.h b/keyboards/cannonkeys/tmov2/mcuconf.h index 048eb4df650..970ed5ba57b 100644 --- a/keyboards/cannonkeys/tmov2/mcuconf.h +++ b/keyboards/cannonkeys/tmov2/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/chavdai40/chconf.h b/keyboards/chavdai40/chconf.h index 6d169b36e9d..2919eae74b6 100644 --- a/keyboards/chavdai40/chconf.h +++ b/keyboards/chavdai40/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/chavdai40/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/chavdai40/halconf.h b/keyboards/chavdai40/halconf.h index 383f3a8bb4f..33dc31edfd3 100644 --- a/keyboards/chavdai40/halconf.h +++ b/keyboards/chavdai40/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/chavdai40/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/chavdai40/mcuconf.h b/keyboards/chavdai40/mcuconf.h index 0cc575d40fd..a73580e0a2e 100644 --- a/keyboards/chavdai40/mcuconf.h +++ b/keyboards/chavdai40/mcuconf.h @@ -1,190 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/chavdai40/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI1 FALSE -#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ - STM32_I2S_MODE_RX) -#define STM32_I2S_SPI1_IRQ_PRIORITY 2 -#define STM32_I2S_SPI1_DMA_PRIORITY 1 -#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* MCUCONF_H */ diff --git a/keyboards/cheshire/curiosity/chconf.h b/keyboards/cheshire/curiosity/chconf.h index 85c1c9b3b9e..66f906bab62 100644 --- a/keyboards/cheshire/curiosity/chconf.h +++ b/keyboards/cheshire/curiosity/chconf.h @@ -1,714 +1,55 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cheshire/curiosity/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif +#pragma once -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** @} */ +#define CH_CFG_USE_OBJ_FIFOS FALSE -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cheshire/curiosity/halconf.h b/keyboards/cheshire/curiosity/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/cheshire/curiosity/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cheshire/curiosity/mcuconf.h b/keyboards/cheshire/curiosity/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/cheshire/curiosity/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/clueboard/60/chconf.h b/keyboards/clueboard/60/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/clueboard/60/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/60/halconf.h b/keyboards/clueboard/60/halconf.h index 6517357194c..e296002a178 100644 --- a/keyboards/clueboard/60/halconf.h +++ b/keyboards/clueboard/60/halconf.h @@ -1,525 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/60/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define HAL_USE_SERIAL_USB FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif +#include_next -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/60/mcuconf.h b/keyboards/clueboard/60/mcuconf.h index 5127682f52f..6d2e3e95faa 100644 --- a/keyboards/clueboard/60/mcuconf.h +++ b/keyboards/clueboard/60/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/60/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/clueboard/66/rev4/chconf.h b/keyboards/clueboard/66/rev4/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/clueboard/66/rev4/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66/rev4/halconf.h b/keyboards/clueboard/66/rev4/halconf.h index 6517357194c..4141d194fec 100644 --- a/keyboards/clueboard/66/rev4/halconf.h +++ b/keyboards/clueboard/66/rev4/halconf.h @@ -1,525 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/66/rev4/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define HAL_USE_SERIAL_USB FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif +#include_next -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66/rev4/mcuconf.h b/keyboards/clueboard/66/rev4/mcuconf.h index 5127682f52f..50deefc919f 100644 --- a/keyboards/clueboard/66/rev4/mcuconf.h +++ b/keyboards/clueboard/66/rev4/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/66/rev4/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/clueboard/66_hotswap/gen1/chconf.h b/keyboards/clueboard/66_hotswap/gen1/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/clueboard/66_hotswap/gen1/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/halconf.h b/keyboards/clueboard/66_hotswap/gen1/halconf.h index 0cb7998f5ed..fc3250b4216 100644 --- a/keyboards/clueboard/66_hotswap/gen1/halconf.h +++ b/keyboards/clueboard/66_hotswap/gen1/halconf.h @@ -1,525 +1,35 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/66_hotswap/gen1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL_USB FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#include_next -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h index 2098fd2320c..3aef0f6075f 100644 --- a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h +++ b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h @@ -1,273 +1,40 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/clueboard/66_hotswap/gen1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/coarse/cordillera/chconf.h b/keyboards/coarse/cordillera/chconf.h index 4640ff5332b..d200b651485 100644 --- a/keyboards/coarse/cordillera/chconf.h +++ b/keyboards/coarse/cordillera/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/coarse/cordillera/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/coarse/cordillera/halconf.h b/keyboards/coarse/cordillera/halconf.h index ff5ae7e8a5f..50f8b19947d 100644 --- a/keyboards/coarse/cordillera/halconf.h +++ b/keyboards/coarse/cordillera/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/coarse/cordillera/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/coarse/cordillera/mcuconf.h b/keyboards/coarse/cordillera/mcuconf.h index 8a48bd9b6ff..6fcaa5e298c 100644 --- a/keyboards/coarse/cordillera/mcuconf.h +++ b/keyboards/coarse/cordillera/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/coarse/cordillera/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/converter/siemens_tastatur/chconf.h b/keyboards/converter/siemens_tastatur/chconf.h index f5e471640c5..2c12943aa7c 100644 --- a/keyboards/converter/siemens_tastatur/chconf.h +++ b/keyboards/converter/siemens_tastatur/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/converter/siemens_tastatur/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/converter/siemens_tastatur/halconf.h b/keyboards/converter/siemens_tastatur/halconf.h index f486da5bf28..3a778cc7c4a 100644 --- a/keyboards/converter/siemens_tastatur/halconf.h +++ b/keyboards/converter/siemens_tastatur/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/converter/siemens_tastatur/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define PAL_USE_CALLBACKS TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS TRUE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/converter/siemens_tastatur/mcuconf.h b/keyboards/converter/siemens_tastatur/mcuconf.h deleted file mode 100644 index 9945e7408d1..00000000000 --- a/keyboards/converter/siemens_tastatur/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/ergodox_infinity/chconf.h b/keyboards/ergodox_infinity/chconf.h index 7f767b6ddc7..05d0ba5301d 100644 --- a/keyboards/ergodox_infinity/chconf.h +++ b/keyboards/ergodox_infinity/chconf.h @@ -1,714 +1,47 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ergodox_infinity/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} +#pragma once -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ergodox_infinity/halconf.h b/keyboards/ergodox_infinity/halconf.h index af31e509ae4..3e47fc4b810 100644 --- a/keyboards/ergodox_infinity/halconf.h +++ b/keyboards/ergodox_infinity/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ergodox_infinity/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SERIAL_BUFFERS_SIZE 128 -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 128 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/function96/chconf.h b/keyboards/function96/chconf.h index d9e59faf760..50e8338de6a 100644 --- a/keyboards/function96/chconf.h +++ b/keyboards/function96/chconf.h @@ -1,711 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/function96/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif +#pragma once -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** @} */ +#define CH_CFG_USE_TM FALSE -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/function96/halconf.h b/keyboards/function96/halconf.h index 97696353fdd..91db435e206 100644 --- a/keyboards/function96/halconf.h +++ b/keyboards/function96/halconf.h @@ -1,522 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/function96/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/function96/mcuconf.h b/keyboards/function96/mcuconf.h index 7c5cd00c2a7..0dfc532c249 100644 --- a/keyboards/function96/mcuconf.h +++ b/keyboards/function96/mcuconf.h @@ -1,168 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/function96/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/generic_panda/panda65_01/chconf.h b/keyboards/generic_panda/panda65_01/chconf.h index 03a6edca4a7..94bf6e95810 100644 --- a/keyboards/generic_panda/panda65_01/chconf.h +++ b/keyboards/generic_panda/panda65_01/chconf.h @@ -1,711 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif +#pragma once -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** @} */ +#define CH_CFG_USE_TM FALSE -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ \ No newline at end of file diff --git a/keyboards/generic_panda/panda65_01/halconf.h b/keyboards/generic_panda/panda65_01/halconf.h index f997b9df08f..9ce551f84cc 100644 --- a/keyboards/generic_panda/panda65_01/halconf.h +++ b/keyboards/generic_panda/panda65_01/halconf.h @@ -1,522 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ \ No newline at end of file diff --git a/keyboards/generic_panda/panda65_01/mcuconf.h b/keyboards/generic_panda/panda65_01/mcuconf.h index d13a27eae62..74044a9ddbc 100644 --- a/keyboards/generic_panda/panda65_01/mcuconf.h +++ b/keyboards/generic_panda/panda65_01/mcuconf.h @@ -1,168 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h index c8dbb85a84d..7e69aaf39b7 100644 --- a/keyboards/hadron/ver3/chconf.h +++ b/keyboards/hadron/ver3/chconf.h @@ -1,714 +1,29 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 1000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hadron/ver3/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#pragma once -/** @} */ +#define CH_CFG_ST_FREQUENCY 1000 -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_ST_TIMEDELTA 0 -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h index b916cd13e36..f89e13f87f9 100644 --- a/keyboards/hadron/ver3/halconf.h +++ b/keyboards/hadron/ver3/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hadron/ver3/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h index 0307251ec3c..2a629921d76 100644 --- a/keyboards/hadron/ver3/mcuconf.h +++ b/keyboards/hadron/ver3/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hadron/ver3/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 3 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/ck4x4/chconf.h b/keyboards/handwired/ck4x4/chconf.h index 03f63da36a8..0f6a9f60edd 100644 --- a/keyboards/handwired/ck4x4/chconf.h +++ b/keyboards/handwired/ck4x4/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/ck4x4/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/ck4x4/halconf.h b/keyboards/handwired/ck4x4/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/handwired/ck4x4/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/ck4x4/mcuconf.h b/keyboards/handwired/ck4x4/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/handwired/ck4x4/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/handwired/co60/rev6/chconf.h b/keyboards/handwired/co60/rev6/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/handwired/co60/rev6/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/co60/rev6/halconf.h b/keyboards/handwired/co60/rev6/halconf.h index ccac2f8f74d..74035c96173 100644 --- a/keyboards/handwired/co60/rev6/halconf.h +++ b/keyboards/handwired/co60/rev6/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/co60/rev6/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/co60/rev6/mcuconf.h b/keyboards/handwired/co60/rev6/mcuconf.h index 6f0b99fe00d..bd7745f0de6 100644 --- a/keyboards/handwired/co60/rev6/mcuconf.h +++ b/keyboards/handwired/co60/rev6/mcuconf.h @@ -1,273 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/co60/rev6/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/co60/rev7/chconf.h b/keyboards/handwired/co60/rev7/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/handwired/co60/rev7/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/co60/rev7/halconf.h b/keyboards/handwired/co60/rev7/halconf.h index 610bee5b590..4a7b8a2cff2 100644 --- a/keyboards/handwired/co60/rev7/halconf.h +++ b/keyboards/handwired/co60/rev7/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/co60/rev7/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/co60/rev7/mcuconf.h b/keyboards/handwired/co60/rev7/mcuconf.h index eefee306b56..abc23383fb9 100644 --- a/keyboards/handwired/co60/rev7/mcuconf.h +++ b/keyboards/handwired/co60/rev7/mcuconf.h @@ -1,273 +1,40 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/co60/rev7/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h index 7dc4f84a8a0..1900489e211 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h index 7dc4f84a8a0..fade216de57 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/bluepill/chconf.h b/keyboards/handwired/onekey/bluepill/chconf.h index f5e471640c5..3d50a97a301 100644 --- a/keyboards/handwired/onekey/bluepill/chconf.h +++ b/keyboards/handwired/onekey/bluepill/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/bluepill/halconf.h b/keyboards/handwired/onekey/bluepill/halconf.h index ff5ae7e8a5f..0572697d5c9 100644 --- a/keyboards/handwired/onekey/bluepill/halconf.h +++ b/keyboards/handwired/onekey/bluepill/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/onekey/bluepill/mcuconf.h b/keyboards/handwired/onekey/bluepill/mcuconf.h index a645d3c5d5c..bcd3e2248d3 100644 --- a/keyboards/handwired/onekey/bluepill/mcuconf.h +++ b/keyboards/handwired/onekey/bluepill/mcuconf.h @@ -1,209 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/handwired/onekey/stm32f0_disco/chconf.h b/keyboards/handwired/onekey/stm32f0_disco/chconf.h index 03f63da36a8..67142a2e6f1 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/chconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/stm32f0_disco/halconf.h b/keyboards/handwired/onekey/stm32f0_disco/halconf.h index ff5ae7e8a5f..af0ac7e3397 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/halconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h index 20c48b611a5..cce1daab65d 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h @@ -1,171 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/handwired/onekey/teensy_32/chconf.h b/keyboards/handwired/onekey/teensy_32/chconf.h index 09903ca2dbc..05beb6439d2 100644 --- a/keyboards/handwired/onekey/teensy_32/chconf.h +++ b/keyboards/handwired/onekey/teensy_32/chconf.h @@ -1,714 +1,59 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 1000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_32/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#pragma once -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_ST_FREQUENCY 1000 -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_MEMCORE TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif +#define CH_CFG_FACTORY_PIPES TRUE -/** @} */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS TRUE -#endif +#define CH_DBG_ENABLE_CHECKS TRUE -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_DBG_ENABLE_ASSERTS TRUE -/** @} */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_DBG_FILL_THREADS TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/teensy_32/halconf.h b/keyboards/handwired/onekey/teensy_32/halconf.h index de0f29ce6ed..072ea8e46fa 100644 --- a/keyboards/handwired/onekey/teensy_32/halconf.h +++ b/keyboards/handwired/onekey/teensy_32/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_32/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/onekey/teensy_lc/chconf.h b/keyboards/handwired/onekey/teensy_lc/chconf.h index 09903ca2dbc..b888a1fc16b 100644 --- a/keyboards/handwired/onekey/teensy_lc/chconf.h +++ b/keyboards/handwired/onekey/teensy_lc/chconf.h @@ -1,714 +1,59 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 1000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_lc/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#pragma once -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_ST_FREQUENCY 1000 -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_MEMCORE TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif +#define CH_CFG_FACTORY_PIPES TRUE -/** @} */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS TRUE -#endif +#define CH_DBG_ENABLE_CHECKS TRUE -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_DBG_ENABLE_ASSERTS TRUE -/** @} */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_DBG_FILL_THREADS TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/onekey/teensy_lc/halconf.h b/keyboards/handwired/onekey/teensy_lc/halconf.h index de0f29ce6ed..db81cd7f62f 100644 --- a/keyboards/handwired/onekey/teensy_lc/halconf.h +++ b/keyboards/handwired/onekey/teensy_lc/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_lc/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h index 7dc4f84a8a0..97772fe4b33 100644 --- a/keyboards/handwired/pill60/blackpill_f401/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/pill60/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h index 7dc4f84a8a0..e23e9214b7d 100644 --- a/keyboards/handwired/pill60/blackpill_f411/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/pill60/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/pill60/bluepill/chconf.h b/keyboards/handwired/pill60/bluepill/chconf.h index d8442f1b1ae..829d921ad2c 100644 --- a/keyboards/handwired/pill60/bluepill/chconf.h +++ b/keyboards/handwired/pill60/bluepill/chconf.h @@ -1,711 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#pragma once -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ \ No newline at end of file diff --git a/keyboards/handwired/pill60/bluepill/halconf.h b/keyboards/handwired/pill60/bluepill/halconf.h index a406166756c..3c9f35fe773 100644 --- a/keyboards/handwired/pill60/bluepill/halconf.h +++ b/keyboards/handwired/pill60/bluepill/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/pill60/bluepill/mcuconf.h b/keyboards/handwired/pill60/bluepill/mcuconf.h index 841b689922d..d5a0fcda0fe 100644 --- a/keyboards/handwired/pill60/bluepill/mcuconf.h +++ b/keyboards/handwired/pill60/bluepill/mcuconf.h @@ -1,209 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h index 7dc4f84a8a0..1a51b391a3b 100644 --- a/keyboards/handwired/riblee_f401/chconf.h +++ b/keyboards/handwired/riblee_f401/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/riblee_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/riblee_f401/halconf.h b/keyboards/handwired/riblee_f401/halconf.h index a8db392aaa6..e53df6faa3e 100644 --- a/keyboards/handwired/riblee_f401/halconf.h +++ b/keyboards/handwired/riblee_f401/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/riblee_f401/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/riblee_f401/mcuconf.h b/keyboards/handwired/riblee_f401/mcuconf.h deleted file mode 100644 index ba6e934fe7b..00000000000 --- a/keyboards/handwired/riblee_f401/mcuconf.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h index 7dc4f84a8a0..6b93caf1d57 100644 --- a/keyboards/handwired/riblee_f411/chconf.h +++ b/keyboards/handwired/riblee_f411/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/riblee_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/steamvan/rev1/chconf.h b/keyboards/handwired/steamvan/rev1/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/handwired/steamvan/rev1/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/steamvan/rev1/halconf.h b/keyboards/handwired/steamvan/rev1/halconf.h index 610bee5b590..f723ba15baa 100644 --- a/keyboards/handwired/steamvan/rev1/halconf.h +++ b/keyboards/handwired/steamvan/rev1/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/steamvan/rev1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/steamvan/rev1/mcuconf.h b/keyboards/handwired/steamvan/rev1/mcuconf.h index eefee306b56..31e35679314 100644 --- a/keyboards/handwired/steamvan/rev1/mcuconf.h +++ b/keyboards/handwired/steamvan/rev1/mcuconf.h @@ -1,273 +1,40 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/steamvan/rev1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/handwired/t111/chconf.h b/keyboards/handwired/t111/chconf.h index f5e471640c5..25009f53dfd 100644 --- a/keyboards/handwired/t111/chconf.h +++ b/keyboards/handwired/t111/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/t111/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/t111/halconf.h b/keyboards/handwired/t111/halconf.h index ff5ae7e8a5f..50353078419 100644 --- a/keyboards/handwired/t111/halconf.h +++ b/keyboards/handwired/t111/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/t111/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/t111/mcuconf.h b/keyboards/handwired/t111/mcuconf.h index 60d9931c353..83ec4f33132 100644 --- a/keyboards/handwired/t111/mcuconf.h +++ b/keyboards/handwired/t111/mcuconf.h @@ -1,209 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/t111/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h index f1640bb1996..92eafd2515e 100644 --- a/keyboards/handwired/twadlee/tp69/chconf.h +++ b/keyboards/handwired/twadlee/tp69/chconf.h @@ -1,700 +1,99 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/twadlee/tp69/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#ifndef CHCONF_H -# define CHCONF_H +#pragma once -# define _CHIBIOS_RT_CONF_ -# define _CHIBIOS_RT_CONF_VER_6_0_ +#define CH_CFG_ST_FREQUENCY 1000 -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -# if !defined(CH_CFG_ST_RESOLUTION) -# define CH_CFG_ST_RESOLUTION 32 -# endif +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -# if !defined(CH_CFG_ST_FREQUENCY) -# define CH_CFG_ST_FREQUENCY 1000 -# endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -# if !defined(CH_CFG_INTERVALS_SIZE) -# define CH_CFG_INTERVALS_SIZE 32 -# endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -# if !defined(CH_CFG_TIME_TYPES_SIZE) -# define CH_CFG_TIME_TYPES_SIZE 32 -# endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -# if !defined(CH_CFG_ST_TIMEDELTA) -# define CH_CFG_ST_TIMEDELTA 0 -# endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** @} */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -# if !defined(CH_CFG_TIME_QUANTUM) -# define CH_CFG_TIME_QUANTUM 20 -# endif +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -# if !defined(CH_CFG_MEMCORE_SIZE) -# define CH_CFG_MEMCORE_SIZE 0 -# endif +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -# if !defined(CH_CFG_NO_IDLE_THREAD) -# define CH_CFG_NO_IDLE_THREAD FALSE -# endif +#define CH_CFG_FACTORY_PIPES TRUE -/** @} */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ +#define CH_DBG_ENABLE_CHECKS TRUE -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_OPTIMIZE_SPEED) -# define CH_CFG_OPTIMIZE_SPEED TRUE -# endif +#define CH_DBG_ENABLE_ASSERTS TRUE -/** @} */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ +#define CH_DBG_FILL_THREADS TRUE -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_TM) -# define CH_CFG_USE_TM FALSE -# endif +#define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_REGISTRY) -# define CH_CFG_USE_REGISTRY TRUE -# endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_WAITEXIT) -# define CH_CFG_USE_WAITEXIT TRUE -# endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_SEMAPHORES) -# define CH_CFG_USE_SEMAPHORES TRUE -# endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -# endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_MUTEXES) -# define CH_CFG_USE_MUTEXES TRUE -# endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -# endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -# if !defined(CH_CFG_USE_CONDVARS) -# define CH_CFG_USE_CONDVARS TRUE -# endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -# endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_EVENTS) -# define CH_CFG_USE_EVENTS TRUE -# endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -# define CH_CFG_USE_EVENTS_TIMEOUT TRUE -# endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_MESSAGES) -# define CH_CFG_USE_MESSAGES TRUE -# endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -# define CH_CFG_USE_MESSAGES_PRIORITY FALSE -# endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -# if !defined(CH_CFG_USE_MAILBOXES) -# define CH_CFG_USE_MAILBOXES TRUE -# endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_MEMCORE) -# define CH_CFG_USE_MEMCORE TRUE -# endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -# if !defined(CH_CFG_USE_HEAP) -# define CH_CFG_USE_HEAP TRUE -# endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_MEMPOOLS) -# define CH_CFG_USE_MEMPOOLS TRUE -# endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_OBJ_FIFOS) -# define CH_CFG_USE_OBJ_FIFOS TRUE -# endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -# if !defined(CH_CFG_USE_PIPES) -# define CH_CFG_USE_PIPES TRUE -# endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -# if !defined(CH_CFG_USE_DYNAMIC) -# define CH_CFG_USE_DYNAMIC TRUE -# endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_CFG_USE_FACTORY) -# define CH_CFG_USE_FACTORY TRUE -# endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -# endif - -/** - * @brief Enables the registry of generic objects. - */ -# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -# endif - -/** - * @brief Enables factory for generic buffers. - */ -# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -# endif - -/** - * @brief Enables factory for semaphores. - */ -# if !defined(CH_CFG_FACTORY_SEMAPHORES) -# define CH_CFG_FACTORY_SEMAPHORES TRUE -# endif - -/** - * @brief Enables factory for mailboxes. - */ -# if !defined(CH_CFG_FACTORY_MAILBOXES) -# define CH_CFG_FACTORY_MAILBOXES TRUE -# endif - -/** - * @brief Enables factory for objects FIFOs. - */ -# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -# define CH_CFG_FACTORY_OBJ_FIFOS TRUE -# endif - -/** - * @brief Enables factory for Pipes. - */ -# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -# define CH_CFG_FACTORY_PIPES TRUE -# endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_DBG_STATISTICS) -# define CH_DBG_STATISTICS FALSE -# endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_DBG_SYSTEM_STATE_CHECK) -# define CH_DBG_SYSTEM_STATE_CHECK TRUE -# endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_DBG_ENABLE_CHECKS) -# define CH_DBG_ENABLE_CHECKS TRUE -# endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_DBG_ENABLE_ASSERTS) -# define CH_DBG_ENABLE_ASSERTS TRUE -# endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -# if !defined(CH_DBG_TRACE_MASK) -# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -# endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -# if !defined(CH_DBG_TRACE_BUFFER_SIZE) -# define CH_DBG_TRACE_BUFFER_SIZE 128 -# endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -# if !defined(CH_DBG_ENABLE_STACK_CHECK) -# define CH_DBG_ENABLE_STACK_CHECK TRUE -# endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -# if !defined(CH_DBG_FILL_THREADS) -# define CH_DBG_FILL_THREADS TRUE -# endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -# if !defined(CH_DBG_THREADS_PROFILING) -# define CH_DBG_THREADS_PROFILING FALSE -# endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -# define CH_CFG_SYSTEM_INIT_HOOK() \ +#define CH_CFG_SYSTEM_INIT_HOOK() \ { /* Add threads initialization code here.*/ } -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ +#define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -# define CH_CFG_THREAD_INIT_HOOK(tp) \ +#define CH_CFG_THREAD_INIT_HOOK(tp) \ { /* Add threads initialization code here.*/ } -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -# define CH_CFG_THREAD_EXIT_HOOK(tp) \ +#define CH_CFG_THREAD_EXIT_HOOK(tp) \ { /* Add threads finalization code here.*/ } -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ { /* Context switch code here.*/ } -/** - * @brief ISR enter hook. - */ -# define CH_CFG_IRQ_PROLOGUE_HOOK() \ +#define CH_CFG_IRQ_PROLOGUE_HOOK() \ { /* IRQ prologue code here.*/ } -/** - * @brief ISR exit hook. - */ -# define CH_CFG_IRQ_EPILOGUE_HOOK() \ +#define CH_CFG_IRQ_EPILOGUE_HOOK() \ { /* IRQ epilogue code here.*/ } -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -# define CH_CFG_IDLE_ENTER_HOOK() \ +#define CH_CFG_IDLE_ENTER_HOOK() \ { /* Idle-enter code here.*/ } -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -# define CH_CFG_IDLE_LEAVE_HOOK() \ +#define CH_CFG_IDLE_LEAVE_HOOK() \ { /* Idle-leave code here.*/ } -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -# define CH_CFG_IDLE_LOOP_HOOK() \ +#define CH_CFG_IDLE_LOOP_HOOK() \ { /* Idle loop code here.*/ } -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -# define CH_CFG_SYSTEM_TICK_HOOK() \ +#define CH_CFG_SYSTEM_TICK_HOOK() \ { /* System tick event code here.*/ } -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) \ { /* System halt code here.*/ } -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -# define CH_CFG_TRACE_HOOK(tep) \ +#define CH_CFG_TRACE_HOOK(tep) \ { /* Trace code here.*/ } -/** @} */ +#include_next -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/twadlee/tp69/halconf.h b/keyboards/handwired/twadlee/tp69/halconf.h deleted file mode 100644 index 908c75542c4..00000000000 --- a/keyboards/handwired/twadlee/tp69/halconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -# define HALCONF_H - -# define _CHIBIOS_HAL_CONF_ -# define _CHIBIOS_HAL_CONF_VER_7_0_ - -# include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -# define HAL_USE_PAL TRUE -# endif - -/** - * @brief Enables the ADC subsystem. - */ -# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -# define HAL_USE_ADC FALSE -# endif - -/** - * @brief Enables the CAN subsystem. - */ -# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -# define HAL_USE_CAN FALSE -# endif - -/** - * @brief Enables the cryptographic subsystem. - */ -# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -# define HAL_USE_CRY FALSE -# endif - -/** - * @brief Enables the DAC subsystem. - */ -# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -# define HAL_USE_DAC FALSE -# endif - -/** - * @brief Enables the GPT subsystem. - */ -# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -# define HAL_USE_GPT FALSE -# endif - -/** - * @brief Enables the I2C subsystem. - */ -# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -# define HAL_USE_I2C FALSE -# endif - -/** - * @brief Enables the I2S subsystem. - */ -# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -# define HAL_USE_I2S FALSE -# endif - -/** - * @brief Enables the ICU subsystem. - */ -# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -# define HAL_USE_ICU FALSE -# endif - -/** - * @brief Enables the MAC subsystem. - */ -# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -# define HAL_USE_MAC FALSE -# endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -# define HAL_USE_MMC_SPI FALSE -# endif - -/** - * @brief Enables the PWM subsystem. - */ -# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -# define HAL_USE_PWM FALSE -# endif - -/** - * @brief Enables the RTC subsystem. - */ -# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -# define HAL_USE_RTC FALSE -# endif - -/** - * @brief Enables the SDC subsystem. - */ -# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -# define HAL_USE_SDC FALSE -# endif - -/** - * @brief Enables the SERIAL subsystem. - */ -# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL FALSE -# endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL_USB FALSE -# endif - -/** - * @brief Enables the SIO subsystem. - */ -# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -# define HAL_USE_SIO FALSE -# endif - -/** - * @brief Enables the SPI subsystem. - */ -# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -# define HAL_USE_SPI FALSE -# endif - -/** - * @brief Enables the TRNG subsystem. - */ -# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -# define HAL_USE_TRNG FALSE -# endif - -/** - * @brief Enables the UART subsystem. - */ -# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -# define HAL_USE_UART FALSE -# endif - -/** - * @brief Enables the USB subsystem. - */ -# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -# define HAL_USE_USB TRUE -# endif - -/** - * @brief Enables the WDG subsystem. - */ -# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -# define HAL_USE_WDG FALSE -# endif - -/** - * @brief Enables the WSPI subsystem. - */ -# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -# define HAL_USE_WSPI FALSE -# endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -# define PAL_USE_CALLBACKS FALSE -# endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -# define PAL_USE_WAIT FALSE -# endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -# define ADC_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define ADC_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -# define CAN_USE_SLEEP_MODE TRUE -# endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -# define CAN_ENFORCE_USE_CALLBACKS FALSE -# endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_USE_FALLBACK FALSE -# endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_ENFORCE_FALLBACK FALSE -# endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -# define DAC_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define DAC_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define I2C_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -# define MAC_USE_ZERO_COPY FALSE -# endif - -/** - * @brief Enables an event sources for incoming packets. - */ -# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -# define MAC_USE_EVENTS TRUE -# endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -# define MMC_NICE_WAITING TRUE -# endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -# define SDC_INIT_RETRY 100 -# endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -# define SDC_MMC_SUPPORT FALSE -# endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -# define SDC_NICE_WAITING TRUE -# endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -# define SDC_INIT_OCR_V20 0x50FF8000U -# endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -# define SDC_INIT_OCR 0x80100000U -# endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -# define SERIAL_DEFAULT_BITRATE 38400 -# endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_BUFFERS_SIZE 16 -# endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_SIZE 1 -# endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_NUMBER 2 -# endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -# define SPI_USE_WAIT TRUE -# endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -# define SPI_USE_CIRCULAR FALSE -# endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define SPI_USE_MUTUAL_EXCLUSION TRUE -# endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -# endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -# define UART_USE_WAIT FALSE -# endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define UART_USE_MUTUAL_EXCLUSION FALSE -# endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -# define USB_USE_WAIT TRUE -# endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -# define WSPI_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define WSPI_USE_MUTUAL_EXCLUSION TRUE -# endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/z150/chconf.h b/keyboards/handwired/z150/chconf.h index f5e471640c5..875fd83eff7 100644 --- a/keyboards/handwired/z150/chconf.h +++ b/keyboards/handwired/z150/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/z150/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/z150/halconf.h b/keyboards/handwired/z150/halconf.h index ff5ae7e8a5f..cea67d99e10 100644 --- a/keyboards/handwired/z150/halconf.h +++ b/keyboards/handwired/z150/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/z150/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/z150/mcuconf.h b/keyboards/handwired/z150/mcuconf.h index 60d9931c353..237bc9fe66a 100644 --- a/keyboards/handwired/z150/mcuconf.h +++ b/keyboards/handwired/z150/mcuconf.h @@ -1,209 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/z150/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/hs60/v2/chconf.h b/keyboards/hs60/v2/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/hs60/v2/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/hs60/v2/halconf.h b/keyboards/hs60/v2/halconf.h index 0cb7998f5ed..4c4d292f705 100644 --- a/keyboards/hs60/v2/halconf.h +++ b/keyboards/hs60/v2/halconf.h @@ -1,525 +1,35 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hs60/v2/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL_USB FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#include_next -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/hs60/v2/mcuconf.h b/keyboards/hs60/v2/mcuconf.h index ed227b79679..59adca2ff06 100644 --- a/keyboards/hs60/v2/mcuconf.h +++ b/keyboards/hs60/v2/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hs60/v2/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/infinity60/chconf.h b/keyboards/infinity60/chconf.h index 7f767b6ddc7..baefb4605f7 100644 --- a/keyboards/infinity60/chconf.h +++ b/keyboards/infinity60/chconf.h @@ -1,714 +1,47 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/infinity60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} +#pragma once -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/infinity60/halconf.h b/keyboards/infinity60/halconf.h index de0f29ce6ed..65511261075 100644 --- a/keyboards/infinity60/halconf.h +++ b/keyboards/infinity60/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/infinity60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/k_type/chconf.h b/keyboards/k_type/chconf.h index 7f767b6ddc7..9caeb446d50 100644 --- a/keyboards/k_type/chconf.h +++ b/keyboards/k_type/chconf.h @@ -1,714 +1,47 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/k_type/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} +#pragma once -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/k_type/halconf.h b/keyboards/k_type/halconf.h index de0f29ce6ed..f618595da5b 100644 --- a/keyboards/k_type/halconf.h +++ b/keyboards/k_type/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/k_type/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/keebio/bdn9/rev2/chconf.h b/keyboards/keebio/bdn9/rev2/chconf.h index 03f63da36a8..75983001bb8 100644 --- a/keyboards/keebio/bdn9/rev2/chconf.h +++ b/keyboards/keebio/bdn9/rev2/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/keebio/bdn9/rev2/halconf.h b/keyboards/keebio/bdn9/rev2/halconf.h index ff5ae7e8a5f..665d4605d70 100644 --- a/keyboards/keebio/bdn9/rev2/halconf.h +++ b/keyboards/keebio/bdn9/rev2/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/keebio/bdn9/rev2/mcuconf.h b/keyboards/keebio/bdn9/rev2/mcuconf.h index 0e49478c8b0..c4a52eb8154 100644 --- a/keyboards/keebio/bdn9/rev2/mcuconf.h +++ b/keyboards/keebio/bdn9/rev2/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/keebio/choconum/chconf.h b/keyboards/keebio/choconum/chconf.h index 03f63da36a8..9c1c64e221e 100644 --- a/keyboards/keebio/choconum/chconf.h +++ b/keyboards/keebio/choconum/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/choconum/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/keebio/choconum/halconf.h b/keyboards/keebio/choconum/halconf.h index ff5ae7e8a5f..899feca0469 100644 --- a/keyboards/keebio/choconum/halconf.h +++ b/keyboards/keebio/choconum/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/choconum/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/keebio/choconum/mcuconf.h b/keyboards/keebio/choconum/mcuconf.h index 0e49478c8b0..41100ac4372 100644 --- a/keyboards/keebio/choconum/mcuconf.h +++ b/keyboards/keebio/choconum/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebio/choconum/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/keebwerk/mega/chconf.h b/keyboards/keebwerk/mega/chconf.h index aac33037058..ab7734fb0af 100644 --- a/keyboards/keebwerk/mega/chconf.h +++ b/keyboards/keebwerk/mega/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebwerk/mega/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_FACTORY TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/** @} */ +#define CH_CFG_FACTORY_PIPES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/keebwerk/mega/halconf.h b/keyboards/keebwerk/mega/halconf.h index 9306b2cfd8e..21d86e12cf7 100644 --- a/keyboards/keebwerk/mega/halconf.h +++ b/keyboards/keebwerk/mega/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebwerk/mega/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_DAC TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_GPT TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define HAL_USE_SERIAL_USB TRUE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/keebwerk/mega/mcuconf.h b/keyboards/keebwerk/mega/mcuconf.h index ed227b79679..0ac46a5faca 100644 --- a/keyboards/keebwerk/mega/mcuconf.h +++ b/keyboards/keebwerk/mega/mcuconf.h @@ -1,273 +1,46 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/keebwerk/mega/mcuconf.h -r platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/misterknife/knife66/chconf.h b/keyboards/misterknife/knife66/chconf.h index 03f63da36a8..5ac73fa91e2 100644 --- a/keyboards/misterknife/knife66/chconf.h +++ b/keyboards/misterknife/knife66/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/misterknife/knife66/halconf.h b/keyboards/misterknife/knife66/halconf.h index adb1a907154..8fa237dcf03 100644 --- a/keyboards/misterknife/knife66/halconf.h +++ b/keyboards/misterknife/knife66/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/misterknife/knife66/mcuconf.h b/keyboards/misterknife/knife66/mcuconf.h index 00292cab1f6..cb8416efc88 100644 --- a/keyboards/misterknife/knife66/mcuconf.h +++ b/keyboards/misterknife/knife66/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/nack/mcuconf.h b/keyboards/nack/mcuconf.h index 0853242dad9..6d20c18dad6 100644 --- a/keyboards/nack/mcuconf.h +++ b/keyboards/nack/mcuconf.h @@ -1,273 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nack/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 TRUE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/nebula12/chconf.h b/keyboards/nebula12/chconf.h index 03f63da36a8..cb75232d458 100644 --- a/keyboards/nebula12/chconf.h +++ b/keyboards/nebula12/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nebula12/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/nebula12/halconf.h b/keyboards/nebula12/halconf.h index b5b151ee26a..53821442b9f 100644 --- a/keyboards/nebula12/halconf.h +++ b/keyboards/nebula12/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nebula12/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_GPT TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nebula12/mcuconf.h b/keyboards/nebula12/mcuconf.h index a414763ed1d..8611307a784 100644 --- a/keyboards/nebula12/mcuconf.h +++ b/keyboards/nebula12/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nebula12/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_GPT_USE_TIM3 +#define STM32_GPT_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/nebula68/chconf.h b/keyboards/nebula68/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/nebula68/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/nebula68/halconf.h b/keyboards/nebula68/halconf.h index e4952ece872..0e01d5b9cbb 100644 --- a/keyboards/nebula68/halconf.h +++ b/keyboards/nebula68/halconf.h @@ -1,525 +1,35 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nebula68/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_DAC FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL_USB FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#include_next -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nebula68/mcuconf.h b/keyboards/nebula68/mcuconf.h index 3b1301f085b..07679b81a40 100644 --- a/keyboards/nebula68/mcuconf.h +++ b/keyboards/nebula68/mcuconf.h @@ -1,273 +1,40 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nebula68/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/nemui/chconf.h b/keyboards/nemui/chconf.h index 03f63da36a8..068b1193567 100644 --- a/keyboards/nemui/chconf.h +++ b/keyboards/nemui/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nemui/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/nemui/halconf.h b/keyboards/nemui/halconf.h index adb1a907154..14ce65aef2d 100644 --- a/keyboards/nemui/halconf.h +++ b/keyboards/nemui/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nemui/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nemui/mcuconf.h b/keyboards/nemui/mcuconf.h index 048eb4df650..955108cab5a 100644 --- a/keyboards/nemui/mcuconf.h +++ b/keyboards/nemui/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nemui/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/nk65/chconf.h b/keyboards/nk65/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/nk65/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/nk65/halconf.h b/keyboards/nk65/halconf.h index 9306b2cfd8e..a68bb03cda8 100644 --- a/keyboards/nk65/halconf.h +++ b/keyboards/nk65/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nk65/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nk65/mcuconf.h b/keyboards/nk65/mcuconf.h index ed227b79679..aff96c1c946 100644 --- a/keyboards/nk65/mcuconf.h +++ b/keyboards/nk65/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nk65/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/nk87/chconf.h b/keyboards/nk87/chconf.h deleted file mode 100644 index aac33037058..00000000000 --- a/keyboards/nk87/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/nk87/halconf.h b/keyboards/nk87/halconf.h index 9306b2cfd8e..cb517eca3df 100644 --- a/keyboards/nk87/halconf.h +++ b/keyboards/nk87/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nk87/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif +#define PAL_USE_CALLBACKS FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif +#define PAL_USE_WAIT FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nk87/mcuconf.h b/keyboards/nk87/mcuconf.h index ed227b79679..42565860c33 100644 --- a/keyboards/nk87/mcuconf.h +++ b/keyboards/nk87/mcuconf.h @@ -1,273 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F3xx_MCUCONF -#define STM32F303_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nk87/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 15 -#define STM32_IRQ_EXTI20_PRIORITY 15 -#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 -#define STM32_IRQ_EXTI30_32_PRIORITY 6 -#define STM32_IRQ_EXTI33_PRIORITY 6 -#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 -#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 -#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 -#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#include_next -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#undef STM32_GPT_USE_TIM15 +#define STM32_GPT_USE_TIM15 FALSE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM15 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 FALSE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM15 FALSE -#define STM32_PWM_USE_TIM16 FALSE -#define STM32_PWM_USE_TIM17 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * RTC driver system settings. - */ -#define STM32_RTC_PRESA_VALUE 32 -#define STM32_RTC_PRESS_VALUE 1024 -#define STM32_RTC_CR_INIT 0 -#define STM32_RTC_TAMPCR_INIT 0 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/peiorisboards/ixora/chconf.h b/keyboards/peiorisboards/ixora/chconf.h index 6d169b36e9d..34c7bf78469 100644 --- a/keyboards/peiorisboards/ixora/chconf.h +++ b/keyboards/peiorisboards/ixora/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/peiorisboards/ixora/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/peiorisboards/ixora/halconf.h b/keyboards/peiorisboards/ixora/halconf.h index 25f3fe5edf0..7a147e3f203 100644 --- a/keyboards/peiorisboards/ixora/halconf.h +++ b/keyboards/peiorisboards/ixora/halconf.h @@ -1,525 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/peiorisboards/ixora/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SERIAL_USB TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define ADC_USE_WAIT FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define ADC_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define SPI_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif +#include_next -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/peiorisboards/ixora/mcuconf.h b/keyboards/peiorisboards/ixora/mcuconf.h deleted file mode 100644 index 4643e9f92e8..00000000000 --- a/keyboards/peiorisboards/ixora/mcuconf.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/phoenix/chconf.h b/keyboards/phoenix/chconf.h index 7dc4f84a8a0..052587223f8 100644 --- a/keyboards/phoenix/chconf.h +++ b/keyboards/phoenix/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/phoenix/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/phoenix/halconf.h b/keyboards/phoenix/halconf.h index a8db392aaa6..f42f063ff97 100644 --- a/keyboards/phoenix/halconf.h +++ b/keyboards/phoenix/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/phoenix/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/phoenix/mcuconf.h b/keyboards/phoenix/mcuconf.h index 7758cf47688..157081d5cbb 100644 --- a/keyboards/phoenix/mcuconf.h +++ b/keyboards/phoenix/mcuconf.h @@ -1,253 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F4xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/phoenix/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/polilla/chconf.h b/keyboards/polilla/chconf.h index 9d569170c1d..0b810449404 100644 --- a/keyboards/polilla/chconf.h +++ b/keyboards/polilla/chconf.h @@ -1,711 +1,47 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/polilla/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#pragma once -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_MEMCORE TRUE -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/polilla/halconf.h b/keyboards/polilla/halconf.h index f95565b945a..01960fd6966 100644 --- a/keyboards/polilla/halconf.h +++ b/keyboards/polilla/halconf.h @@ -1,525 +1,35 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/polilla/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define ADC_USE_WAIT FALSE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define ADC_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SPI_USE_WAIT FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#include_next -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/polilla/mcuconf.h b/keyboards/polilla/mcuconf.h index 924ccb9e073..15a04a01e5b 100644 --- a/keyboards/polilla/mcuconf.h +++ b/keyboards/polilla/mcuconf.h @@ -1,187 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/polilla/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 -#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI1 FALSE -#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ - STM32_I2S_MODE_RX) -#define STM32_I2S_SPI1_IRQ_PRIORITY 2 -#define STM32_I2S_SPI1_DMA_PRIORITY 1 -#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* MCUCONF_H */ diff --git a/keyboards/primekb/meridian/chconf.h b/keyboards/primekb/meridian/chconf.h index 03f63da36a8..b38862a4062 100644 --- a/keyboards/primekb/meridian/chconf.h +++ b/keyboards/primekb/meridian/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/primekb/meridian/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/primekb/meridian/halconf.h b/keyboards/primekb/meridian/halconf.h index adb1a907154..74796d86b06 100644 --- a/keyboards/primekb/meridian/halconf.h +++ b/keyboards/primekb/meridian/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/primekb/meridian/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/primekb/meridian/mcuconf.h b/keyboards/primekb/meridian/mcuconf.h index 048eb4df650..11a1e902784 100644 --- a/keyboards/primekb/meridian/mcuconf.h +++ b/keyboards/primekb/meridian/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/primekb/meridian/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/projectkb/alice/chconf.h b/keyboards/projectkb/alice/chconf.h index 03f63da36a8..677dd671173 100644 --- a/keyboards/projectkb/alice/chconf.h +++ b/keyboards/projectkb/alice/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/alice/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/projectkb/alice/halconf.h b/keyboards/projectkb/alice/halconf.h index adb1a907154..ce8690d849f 100644 --- a/keyboards/projectkb/alice/halconf.h +++ b/keyboards/projectkb/alice/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/alice/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/projectkb/alice/mcuconf.h b/keyboards/projectkb/alice/mcuconf.h index 048eb4df650..20bae0682af 100644 --- a/keyboards/projectkb/alice/mcuconf.h +++ b/keyboards/projectkb/alice/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/alice/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/projectkb/signature87/chconf.h b/keyboards/projectkb/signature87/chconf.h index ce6a08e3292..b096de6c995 100644 --- a/keyboards/projectkb/signature87/chconf.h +++ b/keyboards/projectkb/signature87/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/signature87/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ \ No newline at end of file diff --git a/keyboards/projectkb/signature87/halconf.h b/keyboards/projectkb/signature87/halconf.h index c9e53d87b81..0e51418a6a4 100644 --- a/keyboards/projectkb/signature87/halconf.h +++ b/keyboards/projectkb/signature87/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/signature87/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ \ No newline at end of file diff --git a/keyboards/projectkb/signature87/mcuconf.h b/keyboards/projectkb/signature87/mcuconf.h index fd3967d2815..cbc2922c62e 100644 --- a/keyboards/projectkb/signature87/mcuconf.h +++ b/keyboards/projectkb/signature87/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/projectkb/signature87/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/ramonimbao/squishy65/chconf.h b/keyboards/ramonimbao/squishy65/chconf.h index 03f63da36a8..ec18e90ded6 100644 --- a/keyboards/ramonimbao/squishy65/chconf.h +++ b/keyboards/ramonimbao/squishy65/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ramonimbao/squishy65/halconf.h b/keyboards/ramonimbao/squishy65/halconf.h index ff5ae7e8a5f..69865d68c43 100644 --- a/keyboards/ramonimbao/squishy65/halconf.h +++ b/keyboards/ramonimbao/squishy65/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/ramonimbao/squishy65/mcuconf.h b/keyboards/ramonimbao/squishy65/mcuconf.h index ad12562d170..16d1604cce8 100644 --- a/keyboards/ramonimbao/squishy65/mcuconf.h +++ b/keyboards/ramonimbao/squishy65/mcuconf.h @@ -1,176 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_RTCSEL +#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/ramonimbao/wete/chconf.h b/keyboards/ramonimbao/wete/chconf.h index 03f63da36a8..12fc0b5b89a 100644 --- a/keyboards/ramonimbao/wete/chconf.h +++ b/keyboards/ramonimbao/wete/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ramonimbao/wete/halconf.h b/keyboards/ramonimbao/wete/halconf.h index ff5ae7e8a5f..32847c0a87b 100644 --- a/keyboards/ramonimbao/wete/halconf.h +++ b/keyboards/ramonimbao/wete/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/ramonimbao/wete/mcuconf.h b/keyboards/ramonimbao/wete/mcuconf.h index ad12562d170..1ff77c1fd76 100644 --- a/keyboards/ramonimbao/wete/mcuconf.h +++ b/keyboards/ramonimbao/wete/mcuconf.h @@ -1,176 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_RTCSEL +#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/rart/rartlice/chconf.h b/keyboards/rart/rartlice/chconf.h index cf1cd709d65..f052b4fd9f9 100644 --- a/keyboards/rart/rartlice/chconf.h +++ b/keyboards/rart/rartlice/chconf.h @@ -1,711 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rart/rartlice/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#pragma once -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/rart/rartlice/halconf.h b/keyboards/rart/rartlice/halconf.h index 691c3cda59a..437e5a8656c 100644 --- a/keyboards/rart/rartlice/halconf.h +++ b/keyboards/rart/rartlice/halconf.h @@ -1,522 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rart/rartlice/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/rart/rartlice/mcuconf.h b/keyboards/rart/rartlice/mcuconf.h index c4ab1a5e1bb..408ba270ab2 100644 --- a/keyboards/rart/rartlice/mcuconf.h +++ b/keyboards/rart/rartlice/mcuconf.h @@ -1,206 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rart/rartlice/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/retro_75/chconf.h b/keyboards/retro_75/chconf.h index 85c1c9b3b9e..ac3b1ebd490 100644 --- a/keyboards/retro_75/chconf.h +++ b/keyboards/retro_75/chconf.h @@ -1,714 +1,55 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/retro_75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif +#pragma once -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** @} */ +#define CH_CFG_USE_OBJ_FIFOS FALSE -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/retro_75/halconf.h b/keyboards/retro_75/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/retro_75/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/retro_75/mcuconf.h b/keyboards/retro_75/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/retro_75/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/rocketboard_16/chconf.h b/keyboards/rocketboard_16/chconf.h index f5e471640c5..639e35faa08 100644 --- a/keyboards/rocketboard_16/chconf.h +++ b/keyboards/rocketboard_16/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rocketboard_16/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/rocketboard_16/halconf.h b/keyboards/rocketboard_16/halconf.h index 7347a42536a..f0751644d6d 100644 --- a/keyboards/rocketboard_16/halconf.h +++ b/keyboards/rocketboard_16/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rocketboard_16/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_RTC TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/rocketboard_16/mcuconf.h b/keyboards/rocketboard_16/mcuconf.h index 999f3451289..e706ab50e4f 100644 --- a/keyboards/rocketboard_16/mcuconf.h +++ b/keyboards/rocketboard_16/mcuconf.h @@ -1,209 +1,43 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/rocketboard_16/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_LSI_ENABLED +#define STM32_LSI_ENABLED TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_LSE_ENABLED +#define STM32_LSE_ENABLED TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/satt/vision/chconf.h b/keyboards/satt/vision/chconf.h index 03f63da36a8..7cbcecfd390 100644 --- a/keyboards/satt/vision/chconf.h +++ b/keyboards/satt/vision/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/satt/vision/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/satt/vision/halconf.h b/keyboards/satt/vision/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/satt/vision/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/satt/vision/mcuconf.h b/keyboards/satt/vision/mcuconf.h index 4b76c054ae0..a4085a792c0 100644 --- a/keyboards/satt/vision/mcuconf.h +++ b/keyboards/satt/vision/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/satt/vision/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FASLE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FASLE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/tkc/candybar/chconf.h b/keyboards/tkc/candybar/chconf.h index 03f63da36a8..ca592d02241 100644 --- a/keyboards/tkc/candybar/chconf.h +++ b/keyboards/tkc/candybar/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/tkc/candybar/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/tkc/candybar/halconf.h b/keyboards/tkc/candybar/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/tkc/candybar/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/tkc/candybar/mcuconf.h b/keyboards/tkc/candybar/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/tkc/candybar/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/tkc/godspeed75/chconf.h b/keyboards/tkc/godspeed75/chconf.h index 03f63da36a8..ce35f1a868a 100644 --- a/keyboards/tkc/godspeed75/chconf.h +++ b/keyboards/tkc/godspeed75/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/tkc/godspeed75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/tkc/godspeed75/halconf.h b/keyboards/tkc/godspeed75/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/tkc/godspeed75/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/tkc/godspeed75/mcuconf.h b/keyboards/tkc/godspeed75/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/tkc/godspeed75/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/tkw/stoutgat/v2/f411/chconf.h b/keyboards/tkw/stoutgat/v2/f411/chconf.h index 0b8b69b0e02..57781f24799 100644 --- a/keyboards/tkw/stoutgat/v2/f411/chconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** @} */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/tkw/stoutgat/v2/f411/halconf.h b/keyboards/tkw/stoutgat/v2/f411/halconf.h index 1f8df5dbbd5..2a01cb3a7ac 100644 --- a/keyboards/tkw/stoutgat/v2/f411/halconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/tkw/stoutgat/v2/f411/mcuconf.h b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h index f3a017731c4..d2ce383b55d 100644 --- a/keyboards/tkw/stoutgat/v2/f411/mcuconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h @@ -1,253 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F4xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 384 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 8 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/viktus/styrka/chconf.h b/keyboards/viktus/styrka/chconf.h index 03f63da36a8..c84a9f8b5f5 100644 --- a/keyboards/viktus/styrka/chconf.h +++ b/keyboards/viktus/styrka/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/viktus/styrka/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/viktus/styrka/halconf.h b/keyboards/viktus/styrka/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/viktus/styrka/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/viktus/styrka/mcuconf.h b/keyboards/viktus/styrka/mcuconf.h deleted file mode 100644 index faca3defdf0..00000000000 --- a/keyboards/viktus/styrka/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/vinta/chconf.h b/keyboards/vinta/chconf.h index 6d169b36e9d..0b499f8700f 100644 --- a/keyboards/vinta/chconf.h +++ b/keyboards/vinta/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/vinta/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/vinta/halconf.h b/keyboards/vinta/halconf.h index 25f3fe5edf0..61632a72d85 100644 --- a/keyboards/vinta/halconf.h +++ b/keyboards/vinta/halconf.h @@ -1,525 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/vinta/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SERIAL_USB TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define ADC_USE_WAIT FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define ADC_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define SPI_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif +#include_next -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/vinta/mcuconf.h b/keyboards/vinta/mcuconf.h deleted file mode 100644 index 4643e9f92e8..00000000000 --- a/keyboards/vinta/mcuconf.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/keyboards/westfoxtrot/prophet/chconf.h b/keyboards/westfoxtrot/prophet/chconf.h index 03f63da36a8..74da11e5d7f 100644 --- a/keyboards/westfoxtrot/prophet/chconf.h +++ b/keyboards/westfoxtrot/prophet/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/westfoxtrot/prophet/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/westfoxtrot/prophet/halconf.h b/keyboards/westfoxtrot/prophet/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/westfoxtrot/prophet/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/westfoxtrot/prophet/mcuconf.h b/keyboards/westfoxtrot/prophet/mcuconf.h index 0e49478c8b0..88b4e59805a 100644 --- a/keyboards/westfoxtrot/prophet/mcuconf.h +++ b/keyboards/westfoxtrot/prophet/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/westfoxtrot/prophet/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h index 7f767b6ddc7..26938852f16 100644 --- a/keyboards/whitefox/chconf.h +++ b/keyboards/whitefox/chconf.h @@ -1,714 +1,47 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/whitefox/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} +#pragma once -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_USE_TM FALSE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/whitefox/halconf.h b/keyboards/whitefox/halconf.h index de0f29ce6ed..4ab03a4270e 100644 --- a/keyboards/whitefox/halconf.h +++ b/keyboards/whitefox/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/whitefox/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/wolfmarkclub/wm1/chconf.h b/keyboards/wolfmarkclub/wm1/chconf.h index f5e471640c5..8dfc8d0377b 100644 --- a/keyboards/wolfmarkclub/wm1/chconf.h +++ b/keyboards/wolfmarkclub/wm1/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/wolfmarkclub/wm1/halconf.h b/keyboards/wolfmarkclub/wm1/halconf.h index ff5ae7e8a5f..c0571400fab 100644 --- a/keyboards/wolfmarkclub/wm1/halconf.h +++ b/keyboards/wolfmarkclub/wm1/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/wolfmarkclub/wm1/mcuconf.h b/keyboards/wolfmarkclub/wm1/mcuconf.h index a645d3c5d5c..861603f8252 100644 --- a/keyboards/wolfmarkclub/wm1/mcuconf.h +++ b/keyboards/wolfmarkclub/wm1/mcuconf.h @@ -1,209 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/xelus/kangaroo/chconf.h b/keyboards/xelus/kangaroo/chconf.h index 03f63da36a8..3457d3bb61f 100644 --- a/keyboards/xelus/kangaroo/chconf.h +++ b/keyboards/xelus/kangaroo/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/xelus/kangaroo/halconf.h b/keyboards/xelus/kangaroo/halconf.h index de0f29ce6ed..ba087c7fdfe 100644 --- a/keyboards/xelus/kangaroo/halconf.h +++ b/keyboards/xelus/kangaroo/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/xelus/kangaroo/mcuconf.h b/keyboards/xelus/kangaroo/mcuconf.h index 8d706de2ae8..885d9f014bb 100644 --- a/keyboards/xelus/kangaroo/mcuconf.h +++ b/keyboards/xelus/kangaroo/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/xelus/trinityxttkl/chconf.h b/keyboards/xelus/trinityxttkl/chconf.h index 03f63da36a8..867f495f68e 100644 --- a/keyboards/xelus/trinityxttkl/chconf.h +++ b/keyboards/xelus/trinityxttkl/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/trinityxttkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/xelus/trinityxttkl/halconf.h b/keyboards/xelus/trinityxttkl/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/xelus/trinityxttkl/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/xelus/trinityxttkl/mcuconf.h b/keyboards/xelus/trinityxttkl/mcuconf.h index 0e49478c8b0..a1b18d56ccc 100644 --- a/keyboards/xelus/trinityxttkl/mcuconf.h +++ b/keyboards/xelus/trinityxttkl/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/trinityxttkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/xelus/valor_frl_tkl/chconf.h b/keyboards/xelus/valor_frl_tkl/chconf.h index 03f63da36a8..d7978e48c20 100644 --- a/keyboards/xelus/valor_frl_tkl/chconf.h +++ b/keyboards/xelus/valor_frl_tkl/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/xelus/valor_frl_tkl/halconf.h b/keyboards/xelus/valor_frl_tkl/halconf.h index de0f29ce6ed..bb34ba2c72c 100644 --- a/keyboards/xelus/valor_frl_tkl/halconf.h +++ b/keyboards/xelus/valor_frl_tkl/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/xelus/valor_frl_tkl/mcuconf.h b/keyboards/xelus/valor_frl_tkl/mcuconf.h index 8d706de2ae8..44af0df3ce8 100644 --- a/keyboards/xelus/valor_frl_tkl/mcuconf.h +++ b/keyboards/xelus/valor_frl_tkl/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/zoo/wampus/chconf.h b/keyboards/zoo/wampus/chconf.h index 4640ff5332b..05604b0a1e5 100644 --- a/keyboards/zoo/wampus/chconf.h +++ b/keyboards/zoo/wampus/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zoo/wampus/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/zoo/wampus/halconf.h b/keyboards/zoo/wampus/halconf.h index adb1a907154..7ad94d480b2 100644 --- a/keyboards/zoo/wampus/halconf.h +++ b/keyboards/zoo/wampus/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zoo/wampus/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/zoo/wampus/mcuconf.h b/keyboards/zoo/wampus/mcuconf.h index 048eb4df650..6d1148d29e5 100644 --- a/keyboards/zoo/wampus/mcuconf.h +++ b/keyboards/zoo/wampus/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zoo/wampus/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/zvecr/split_blackpill/chconf.h b/keyboards/zvecr/split_blackpill/chconf.h index f5e471640c5..c85f31fcb1d 100644 --- a/keyboards/zvecr/split_blackpill/chconf.h +++ b/keyboards/zvecr/split_blackpill/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/zvecr/split_blackpill/halconf.h b/keyboards/zvecr/split_blackpill/halconf.h index cc677502022..473f46c1420 100644 --- a/keyboards/zvecr/split_blackpill/halconf.h +++ b/keyboards/zvecr/split_blackpill/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/zvecr/split_blackpill/mcuconf.h b/keyboards/zvecr/split_blackpill/mcuconf.h index 4dea6bcf71a..d93d703d478 100644 --- a/keyboards/zvecr/split_blackpill/mcuconf.h +++ b/keyboards/zvecr/split_blackpill/mcuconf.h @@ -1,209 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/zvecr/zv48/f401/chconf.h b/keyboards/zvecr/zv48/f401/chconf.h index 0b8b69b0e02..e036ca89332 100644 --- a/keyboards/zvecr/zv48/f401/chconf.h +++ b/keyboards/zvecr/zv48/f401/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** @} */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/zvecr/zv48/f401/halconf.h b/keyboards/zvecr/zv48/f401/halconf.h index 1f8df5dbbd5..87edd0bb8ba 100644 --- a/keyboards/zvecr/zv48/f401/halconf.h +++ b/keyboards/zvecr/zv48/f401/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/zvecr/zv48/f401/mcuconf.h b/keyboards/zvecr/zv48/f401/mcuconf.h index c0c96bc13e6..45010ed36aa 100644 --- a/keyboards/zvecr/zv48/f401/mcuconf.h +++ b/keyboards/zvecr/zv48/f401/mcuconf.h @@ -1,253 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F4xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/keyboards/zvecr/zv48/f411/chconf.h b/keyboards/zvecr/zv48/f411/chconf.h index 0b8b69b0e02..30fb0a1e559 100644 --- a/keyboards/zvecr/zv48/f411/chconf.h +++ b/keyboards/zvecr/zv48/f411/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** @} */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/zvecr/zv48/f411/halconf.h b/keyboards/zvecr/zv48/f411/halconf.h index 1f8df5dbbd5..f959b2f8fa4 100644 --- a/keyboards/zvecr/zv48/f411/halconf.h +++ b/keyboards/zvecr/zv48/f411/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SERIAL TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/zvecr/zv48/f411/mcuconf.h b/keyboards/zvecr/zv48/f411/mcuconf.h index f3a017731c4..b70bdf40e80 100644 --- a/keyboards/zvecr/zv48/f411/mcuconf.h +++ b/keyboards/zvecr/zv48/f411/mcuconf.h @@ -1,253 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F4xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 384 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 8 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 15 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 -#define STM32_IRQ_EXTI20_PRIORITY 6 -#define STM32_IRQ_EXTI21_PRIORITY 15 -#define STM32_IRQ_EXTI22_PRIORITY 15 +#pragma once -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ From 63d06655e65a4399d4d1213f38cff80e3f23a8cd Mon Sep 17 00:00:00 2001 From: Jesper Jensen Date: Sun, 6 Dec 2020 07:24:49 +0100 Subject: [PATCH 007/145] gcc 10 compatibility for Drop alt (#9485) * Split dmac_desc declaration and definition According to the official documentation[1] gcc 10 is more strict about correct extern usage. I've had to move the definition of dmac_desc and dmac_desc_wb from i2c_master.h to the corresponding .c file. This could be an issue if anyone includes the i2c_master.h file without liking with the object file. [1]: https://gcc.gnu.org/gcc-10/porting_to.html * Remove the keymap_config definition from keymaps The keymap_config def was conflicting with the one found in tmk_core/common/magic.c. Declaring it extern in magic.c breaks a bunch of keyboard that rely on that declaration (like the ergodox). Instead I've removed the one found in the keymap.c of the massdrop alt. The same change will have to be made to other keyboards. --- keyboards/massdrop/alt/keymaps/abishalom/keymap.c | 2 -- keyboards/massdrop/alt/keymaps/bonta/keymap.c | 2 -- keyboards/massdrop/alt/keymaps/favorable-mutation/keymap.c | 2 -- keyboards/massdrop/alt/keymaps/reywood/keymap.c | 2 -- tmk_core/protocol/arm_atsam/i2c_master.c | 3 +++ tmk_core/protocol/arm_atsam/i2c_master.h | 4 ++-- 6 files changed, 5 insertions(+), 10 deletions(-) diff --git a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c index f6f79ad91ef..a08123b0f57 100644 --- a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c +++ b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c @@ -12,8 +12,6 @@ enum alt_keycodes { #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ diff --git a/keyboards/massdrop/alt/keymaps/bonta/keymap.c b/keyboards/massdrop/alt/keymaps/bonta/keymap.c index c1acf2c151c..9ac27f57e38 100644 --- a/keyboards/massdrop/alt/keymaps/bonta/keymap.c +++ b/keyboards/massdrop/alt/keymaps/bonta/keymap.c @@ -14,8 +14,6 @@ enum alt_keycodes { #define RGB_BRU RGB_VAI #define RGB_BRD RGB_VAD -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ diff --git a/keyboards/massdrop/alt/keymaps/favorable-mutation/keymap.c b/keyboards/massdrop/alt/keymaps/favorable-mutation/keymap.c index 873d18449b1..4c079a6aaf2 100644 --- a/keyboards/massdrop/alt/keymaps/favorable-mutation/keymap.c +++ b/keyboards/massdrop/alt/keymaps/favorable-mutation/keymap.c @@ -28,8 +28,6 @@ enum alt_keycodes { // //TODO tap/toggle for layers -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPOT, diff --git a/keyboards/massdrop/alt/keymaps/reywood/keymap.c b/keyboards/massdrop/alt/keymaps/reywood/keymap.c index cf60acfe66c..6279b509b45 100644 --- a/keyboards/massdrop/alt/keymaps/reywood/keymap.c +++ b/keyboards/massdrop/alt/keymaps/reywood/keymap.c @@ -26,8 +26,6 @@ enum alt_keycodes { #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode #define ______ KC_TRNS -keymap_config_t keymap_config; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index d3319ab447d..dda2f85b001 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -28,6 +28,9 @@ along with this program. If not, see . # define I2C_LED_USE_DMA 1 // Set 1 to use background DMA transfers for leds, Set 0 to use inline software transfers +DmacDescriptor dmac_desc; +DmacDescriptor dmac_desc_wb; + static uint8_t i2c_led_q[I2C_Q_SIZE]; // I2C queue circular buffer static uint8_t i2c_led_q_s; // Start of circular buffer static uint8_t i2c_led_q_e; // End of circular buffer diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h index 44dbdfbffaa..68773f213fb 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.h +++ b/tmk_core/protocol/arm_atsam/i2c_master.h @@ -24,8 +24,8 @@ along with this program. If not, see . # include "issi3733_driver.h" # include "config.h" -__attribute__((__aligned__(16))) DmacDescriptor dmac_desc; -__attribute__((__aligned__(16))) DmacDescriptor dmac_desc_wb; +extern __attribute__((__aligned__(16))) DmacDescriptor dmac_desc; +extern __attribute__((__aligned__(16))) DmacDescriptor dmac_desc_wb; uint8_t I2C3733_Init_Control(void); uint8_t I2C3733_Init_Drivers(void); From eb3964bd576568d577dc90704c7f2497de9a5aa9 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 8 Dec 2020 15:05:11 +1100 Subject: [PATCH 008/145] ChibiOS conf migration: dekunukem/duckypad (#11123) --- keyboards/dekunukem/duckypad/chconf.h | 729 ++----------------------- keyboards/dekunukem/duckypad/halconf.h | 536 +----------------- keyboards/dekunukem/duckypad/mcuconf.h | 192 +------ 3 files changed, 87 insertions(+), 1370 deletions(-) diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h index 85c1c9b3b9e..9b32262510f 100644 --- a/keyboards/dekunukem/duckypad/chconf.h +++ b/keyboards/dekunukem/duckypad/chconf.h @@ -1,714 +1,55 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif +#pragma once -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** @} */ +#define CH_CFG_USE_OBJ_FIFOS FALSE -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/dekunukem/duckypad/halconf.h b/keyboards/dekunukem/duckypad/halconf.h index d08e88460f7..2934d656caa 100644 --- a/keyboards/dekunukem/duckypad/halconf.h +++ b/keyboards/dekunukem/duckypad/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_MMC_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI TRUE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/dekunukem/duckypad/mcuconf.h b/keyboards/dekunukem/duckypad/mcuconf.h index 201db101dc8..6f7b7c0f92e 100644 --- a/keyboards/dekunukem/duckypad/mcuconf.h +++ b/keyboards/dekunukem/duckypad/mcuconf.h @@ -1,178 +1,46 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_I2C_I2C1_RX_DMA_STREAM +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_I2C_I2C1_TX_DMA_STREAM +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") +#undef STM32_SPI_SPI1_RX_DMA_STREAM +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 +#undef STM32_SPI_SPI1_TX_DMA_STREAM +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From 5e2b53541bef9b380380286724b321cc8a0ac413 Mon Sep 17 00:00:00 2001 From: Casey Webster Date: Wed, 16 Dec 2020 23:21:26 -0600 Subject: [PATCH 009/145] Add modifier state to the split keyboard transport (#10400) * Add modifier state to the split transport This adds modifier state to the i2c and serial transport for split keyboards. The purpose of this is to allow e.g. displaying modifier state on the slave side of a split keyboard on an oled. This adds one byte to the data transferred between halves. This also fixes a missing ifdef guard for BLACKLIGHT_ENABLE. Break modifiers into real/weak/oneshot Fix incorrect slave serial mod setting Fix typo in serial weal mod setter Fix build errors for the I2C code that I introduced Code cleanup and formatting per project preferences Correctly get oneshot mods Fix missing braces Remove unneeded ifdef guard Make the added state transport optional Add documentation for the new define to enable this feature Fix stray grave mark * Fix error introduced in conflict resolution --- docs/feature_split_keyboard.md | 10 +++++ quantum/split_common/transport.c | 68 ++++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+) diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index b2341142002..c285e353d49 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -181,6 +181,16 @@ If you're having issues with serial communication, you can change this value, as * **`4`**: about 26kbps * **`5`**: about 20kbps +```c +#define SPLIT_MODS_ENABLE +``` + +This enables transmitting modifier state (normal, weak and oneshot) to the non +primary side of the split keyboard. This adds a few bytes of data to the split +communication protocol and may impact the matrix scan speed when enabled. +The purpose of this feature is to support cosmetic use of modifer state (e.g. +displaying status on an OLED screen). + ### Hardware Configuration Options There are some settings that you may need to configure, based on how the hardware is set up. diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index 6856b605588..ae0c10b827d 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -32,7 +32,16 @@ typedef struct _I2C_slave_buffer_t { uint32_t sync_timer; # endif matrix_row_t smatrix[ROWS_PER_HAND]; +# ifdef SPLIT_MODS_ENABLE + uint8_t real_mods; + uint8_t weak_mods; +# ifndef NO_ACTION_ONESHOT + uint8_t oneshot_mods; +# endif +# endif +# ifdef BACKLIGHT_ENABLE uint8_t backlight_level; +# endif # if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) rgblight_syncinfo_t rgblight_sync; # endif @@ -46,6 +55,10 @@ typedef struct _I2C_slave_buffer_t { static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; +# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) +# define I2C_REAL_MODS_START offsetof(I2C_slave_buffer_t, real_mods) +# define I2C_WEAK_MODS_START offsetof(I2C_slave_buffer_t, weak_mods) +# define I2C_ONESHOT_MODS_START offsetof(I2C_slave_buffer_t, oneshot_mods) # define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level) # define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) # define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer) @@ -97,6 +110,31 @@ bool transport_master(matrix_row_t matrix[]) { } # endif +# ifdef SPLIT_MODS_ENABLE + uint8_t real_mods = get_mods(); + if (real_mods != i2c_buffer->real_mods) { + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_REAL_MODS_START, (void *)&real_mods, sizeof(real_mods), TIMEOUT) >= 0) { + i2c_buffer->real_mods = real_mods; + } + } + + uint8_t weak_mods = get_weak_mods(); + if (weak_mods != i2c_buffer->weak_mods) { + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_WEAK_MODS_START, (void *)&weak_mods, sizeof(weak_mods), TIMEOUT) >= 0) { + i2c_buffer->weak_mods = weak_mods; + } + } + +# ifndef NO_ACTION_ONESHOT + uint8_t oneshot_mods = get_oneshot_mods(); + if (oneshot_mods != i2c_buffer->oneshot_mods) { + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_ONESHOT_MODS_START, (void *)&oneshot_mods, sizeof(oneshot_mods), TIMEOUT) >= 0) { + i2c_buffer->oneshot_mods = oneshot_mods; + } + } +# endif +# endif + # ifndef DISABLE_SYNC_TIMER i2c_buffer->sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_SYNC_TIME_START, (void *)&i2c_buffer->sync_timer, sizeof(i2c_buffer->sync_timer), TIMEOUT); @@ -131,6 +169,14 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef WPM_ENABLE set_current_wpm(i2c_buffer->current_wpm); # endif + +# ifdef SPLIT_MODS_ENABLE + set_mods(i2c_buffer->real_mods); + set_weak_mods(i2c_buffer->weak_mods); +# ifndef NO_ACTION_ONESHOT + set_oneshot_mods(i2c_buffer->oneshot_mods); +# endif +# endif } void transport_master_init(void) { i2c_init(); } @@ -152,6 +198,13 @@ typedef struct _Serial_s2m_buffer_t { } Serial_s2m_buffer_t; typedef struct _Serial_m2s_buffer_t { +# ifdef SPLIT_MODS_ENABLE + uint8_t real_mods; + uint8_t weak_mods; +# ifndef NO_ACTION_ONESHOT + uint8_t oneshot_mods; +# endif +# endif # ifndef DISABLE_SYNC_TIMER uint32_t sync_timer; # endif @@ -268,6 +321,13 @@ bool transport_master(matrix_row_t matrix[]) { serial_m2s_buffer.current_wpm = get_current_wpm(); # endif +# ifdef SPLIT_MODS_ENABLE + serial_m2s_buffer.real_mods = get_mods(); + serial_m2s_buffer.weak_mods = get_weak_mods(); +# ifndef NO_ACTION_ONESHOT + serial_m2s_buffer.oneshot_mods = get_oneshot_mods(); +# endif +# endif # ifndef DISABLE_SYNC_TIMER serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; # endif @@ -295,6 +355,14 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef WPM_ENABLE set_current_wpm(serial_m2s_buffer.current_wpm); # endif + +# ifdef SPLIT_MODS_ENABLE + set_mods(serial_m2s_buffer.real_mods); + set_weak_mods(serial_m2s_buffer.weak_mods); +# ifndef NO_ACTION_ONESHOT + set_oneshot_mods(serial_m2s_buffer.oneshot_mods); +# endif +# endif } #endif From 115b60b0e11f8661385b2219ce5ddbf2982b1f8c Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 18 Dec 2020 02:49:24 +1100 Subject: [PATCH 010/145] Fix duplicate I2C_KEYMAP_START define (#11237) --- quantum/split_common/transport.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index ae0c10b827d..e601fb4df5a 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -55,14 +55,13 @@ typedef struct _I2C_slave_buffer_t { static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; +# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer) # define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) # define I2C_REAL_MODS_START offsetof(I2C_slave_buffer_t, real_mods) # define I2C_WEAK_MODS_START offsetof(I2C_slave_buffer_t, weak_mods) # define I2C_ONESHOT_MODS_START offsetof(I2C_slave_buffer_t, oneshot_mods) # define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level) # define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) -# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer) -# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) # define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state) # define I2C_WPM_START offsetof(I2C_slave_buffer_t, current_wpm) From 296a6cf4ea32d2aabc8fa1b09f9552fc541ab13b Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 21 Dec 2020 15:02:38 +1100 Subject: [PATCH 011/145] ChibiOS conf migrations... take 3 (#11261) * Add SPI1 DMA stream definitions. * ChibiOS conf upgrade for acheron/lasgweloth acheron/lasgweloth - 3bedb0fe1f1b542b4d90daeaeab8905cd9ee992c * ChibiOS conf upgrade for box75 box75 - ff91bacf5cec0b42df02967eb0ecbf4bd1b56928 * ChibiOS conf upgrade for geekboards/macropad_v2 geekboards/macropad_v2 - 1c205720d47f7e636173064b1aef1637860a9134 * ChibiOS conf upgrade for iron180 iron180 - 867929d78361a50e34671e4e167cafd927d8982b * ChibiOS conf upgrade for technika technika - cb9295b90980eb8dfdc63d6031533edbb344c045 --- keyboards/acheron/lasgweloth/chconf.h | 729 +----------------- keyboards/acheron/lasgweloth/halconf.h | 525 ------------- keyboards/acheron/lasgweloth/mcuconf.h | 184 +---- keyboards/box75/chconf.h | 729 +----------------- keyboards/box75/halconf.h | 525 ------------- keyboards/box75/mcuconf.h | 184 +---- keyboards/geekboards/macropad_v2/chconf.h | 729 +----------------- keyboards/geekboards/macropad_v2/halconf.h | 536 +------------ keyboards/geekboards/macropad_v2/mcuconf.h | 188 +---- keyboards/iron180/chconf.h | 729 +----------------- keyboards/iron180/halconf.h | 536 +------------ keyboards/iron180/mcuconf.h | 185 +---- keyboards/technika/chconf.h | 729 +----------------- keyboards/technika/halconf.h | 536 +------------ keyboards/technika/mcuconf.h | 186 +---- .../GENERIC_STM32_F072XB/configs/mcuconf.h | 2 + 16 files changed, 307 insertions(+), 6925 deletions(-) delete mode 100644 keyboards/acheron/lasgweloth/halconf.h delete mode 100644 keyboards/box75/halconf.h diff --git a/keyboards/acheron/lasgweloth/chconf.h b/keyboards/acheron/lasgweloth/chconf.h index 4640ff5332b..8a2611726d8 100644 --- a/keyboards/acheron/lasgweloth/chconf.h +++ b/keyboards/acheron/lasgweloth/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/lasgweloth/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/acheron/lasgweloth/halconf.h b/keyboards/acheron/lasgweloth/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/acheron/lasgweloth/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/acheron/lasgweloth/mcuconf.h b/keyboards/acheron/lasgweloth/mcuconf.h index 6289be66dad..f4225781851 100644 --- a/keyboards/acheron/lasgweloth/mcuconf.h +++ b/keyboards/acheron/lasgweloth/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/acheron/lasgweloth/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/box75/chconf.h b/keyboards/box75/chconf.h index 4640ff5332b..763024f90b0 100644 --- a/keyboards/box75/chconf.h +++ b/keyboards/box75/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/box75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/box75/halconf.h b/keyboards/box75/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/box75/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/box75/mcuconf.h b/keyboards/box75/mcuconf.h index 6289be66dad..9c319a3c736 100644 --- a/keyboards/box75/mcuconf.h +++ b/keyboards/box75/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/box75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/geekboards/macropad_v2/chconf.h b/keyboards/geekboards/macropad_v2/chconf.h index 03f63da36a8..f34bbc4bdea 100644 --- a/keyboards/geekboards/macropad_v2/chconf.h +++ b/keyboards/geekboards/macropad_v2/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/geekboards/macropad_v2/halconf.h b/keyboards/geekboards/macropad_v2/halconf.h index adb1a907154..ece95bbc583 100644 --- a/keyboards/geekboards/macropad_v2/halconf.h +++ b/keyboards/geekboards/macropad_v2/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/geekboards/macropad_v2/mcuconf.h b/keyboards/geekboards/macropad_v2/mcuconf.h index 271bd570b80..7f21a800c0e 100644 --- a/keyboards/geekboards/macropad_v2/mcuconf.h +++ b/keyboards/geekboards/macropad_v2/mcuconf.h @@ -1,178 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -// #define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -// #define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/iron180/chconf.h b/keyboards/iron180/chconf.h index 4640ff5332b..1b4c060f5fa 100644 --- a/keyboards/iron180/chconf.h +++ b/keyboards/iron180/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/iron180/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/iron180/halconf.h b/keyboards/iron180/halconf.h index 92065d07b52..733f30da037 100644 --- a/keyboards/iron180/halconf.h +++ b/keyboards/iron180/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/iron180/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM YES -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM YES -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/iron180/mcuconf.h b/keyboards/iron180/mcuconf.h index 93a1c1ad8c0..b4fd4cca5e9 100644 --- a/keyboards/iron180/mcuconf.h +++ b/keyboards/iron180/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/iron180/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 YES -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 YES -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/technika/chconf.h b/keyboards/technika/chconf.h index 4640ff5332b..96a926f3be6 100644 --- a/keyboards/technika/chconf.h +++ b/keyboards/technika/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/technika/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/technika/halconf.h b/keyboards/technika/halconf.h index df71dd64c42..8350b86ca55 100644 --- a/keyboards/technika/halconf.h +++ b/keyboards/technika/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/technika/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/technika/mcuconf.h b/keyboards/technika/mcuconf.h index 5df5e5cc4cd..b2639511d6b 100644 --- a/keyboards/technika/mcuconf.h +++ b/keyboards/technika/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/technika/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h index d6b6aae4f18..32b2777a810 100644 --- a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h +++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h @@ -146,6 +146,8 @@ #define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 2 #define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) #define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) #define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") From 3b06ab51e558695a040b59e1277709c67573e602 Mon Sep 17 00:00:00 2001 From: Sendy Aditya Suryana Date: Wed, 23 Dec 2020 02:20:09 +0700 Subject: [PATCH 012/145] [Keyboard] Add Pix (#11154) * Add nakal4x keyboard firmware * Fix VIA config * Setup OLED * Rename to pix * Rename via.json to info.json * Update keyboards/sendyyeah/pix/config.h remove obsolete value as suggested by drashna Co-authored-by: Drashna Jaelre * Add GPL Like license header * Remove unused bootloader list * Change URL * Update readme * Delete via info.json * Add GPL2+ license header on via keymap * Update keyboards/sendyyeah/pix/rules.mk Co-authored-by: Ryan * Update keyboards/sendyyeah/pix/keymaps/default/glcdfont.c Co-authored-by: Ryan * Add GPL2+ license header on via keymap * Add image * Remove local drivers * Remove unused method on keymap files * Change project name on keymap readme files * Update keyboards/sendyyeah/pix/rules.mk Co-authored-by: Ryan * Update keyboards/sendyyeah/pix/readme.md Co-authored-by: Ryan * Update keyboards/sendyyeah/pix/keymaps/default/glcdfont.c Co-authored-by: Ryan * Update keyboards/sendyyeah/pix/keymaps/default/keymap.c Co-authored-by: Ryan * Update keyboards/sendyyeah/pix/keymaps/via/keymap.c Co-authored-by: Sendy Aditya Suryana Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/sendyyeah/pix/config.h | 63 +++++ keyboards/sendyyeah/pix/info.json | 18 ++ .../sendyyeah/pix/keymaps/default/glcdfont.c | 244 ++++++++++++++++++ .../sendyyeah/pix/keymaps/default/keymap.c | 233 +++++++++++++++++ .../sendyyeah/pix/keymaps/default/readme.md | 7 + keyboards/sendyyeah/pix/keymaps/via/keymap.c | 233 +++++++++++++++++ keyboards/sendyyeah/pix/keymaps/via/readme.md | 7 + keyboards/sendyyeah/pix/keymaps/via/rules.mk | 2 + keyboards/sendyyeah/pix/pix.c | 30 +++ keyboards/sendyyeah/pix/pix.h | 23 ++ keyboards/sendyyeah/pix/readme.md | 19 ++ keyboards/sendyyeah/pix/rules.mk | 24 ++ 12 files changed, 903 insertions(+) create mode 100644 keyboards/sendyyeah/pix/config.h create mode 100644 keyboards/sendyyeah/pix/info.json create mode 100644 keyboards/sendyyeah/pix/keymaps/default/glcdfont.c create mode 100644 keyboards/sendyyeah/pix/keymaps/default/keymap.c create mode 100644 keyboards/sendyyeah/pix/keymaps/default/readme.md create mode 100644 keyboards/sendyyeah/pix/keymaps/via/keymap.c create mode 100644 keyboards/sendyyeah/pix/keymaps/via/readme.md create mode 100644 keyboards/sendyyeah/pix/keymaps/via/rules.mk create mode 100644 keyboards/sendyyeah/pix/pix.c create mode 100644 keyboards/sendyyeah/pix/pix.h create mode 100644 keyboards/sendyyeah/pix/readme.md create mode 100644 keyboards/sendyyeah/pix/rules.mk diff --git a/keyboards/sendyyeah/pix/config.h b/keyboards/sendyyeah/pix/config.h new file mode 100644 index 00000000000..a9c3080d8c5 --- /dev/null +++ b/keyboards/sendyyeah/pix/config.h @@ -0,0 +1,63 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5359 +#define PRODUCT_ID 0x4e34 +#define DEVICE_VER 0x0001 +#define MANUFACTURER sendyyeah +#define PRODUCT Pix + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 5 + +#define OLED_FONT_H "keymaps/default/glcdfont.c" +#define OLED_TIMEOUT 600000 // Turn of after 10 minutes + +/* Keyboard Matrix Assignments */ +#define DIRECT_PINS { \ + { C6, D7, E6, B4, F6 }, \ +} + +#define ENCODERS_PAD_A { B1 } +#define ENCODERS_PAD_B { B3 } + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// #define RGB_DI_PIN B5 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 5 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// #define RGBLIGHT_ANIMATIONS +// #define RGBLIGHT_LAYERS +// #define RGBLIGHT_LAYER_BLINK +// #endif diff --git a/keyboards/sendyyeah/pix/info.json b/keyboards/sendyyeah/pix/info.json new file mode 100644 index 00000000000..f93c3aae67d --- /dev/null +++ b/keyboards/sendyyeah/pix/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Pix", + "url": "https://github.com/sendz/pix", + "maintainer": "sendz", + "width": 5, + "height": 1, + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0} + ] + } + } +} diff --git a/keyboards/sendyyeah/pix/keymaps/default/glcdfont.c b/keyboards/sendyyeah/pix/keymaps/default/glcdfont.c new file mode 100644 index 00000000000..7af69f796c3 --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/default/glcdfont.c @@ -0,0 +1,244 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "progmem.h" + +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0x66, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5E, 0x00, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x06, 0x00, 0x00, + 0x14, 0x3E, 0x14, 0x3E, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x26, 0x16, 0x08, 0x34, 0x32, 0x00, + 0x36, 0x4A, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x0A, 0x06, 0x00, 0x00, 0x00, + 0x00, 0x3C, 0x42, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x42, 0x3C, 0x00, 0x00, + 0x2A, 0x1C, 0x3E, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0xA0, 0x60, 0x00, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3C, 0x42, 0x42, 0x42, 0x3C, 0x00, + 0x00, 0x44, 0x7E, 0x40, 0x00, 0x00, + 0x64, 0x52, 0x52, 0x52, 0x4C, 0x00, + 0x22, 0x42, 0x4A, 0x4A, 0x36, 0x00, + 0x38, 0x24, 0x22, 0x7E, 0x20, 0x00, + 0x2E, 0x4A, 0x4A, 0x4A, 0x32, 0x00, + 0x3C, 0x4A, 0x4A, 0x4A, 0x32, 0x00, + 0x02, 0x02, 0x62, 0x1A, 0x06, 0x00, + 0x34, 0x4A, 0x4A, 0x4A, 0x34, 0x00, + 0x4C, 0x52, 0x52, 0x52, 0x3C, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x00, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x00, 0x22, 0x14, 0x08, 0x00, + 0x00, 0x04, 0x52, 0x0A, 0x04, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x12, 0x12, 0x7C, 0x00, + 0x7E, 0x4A, 0x4A, 0x4A, 0x34, 0x00, + 0x3C, 0x42, 0x42, 0x42, 0x42, 0x00, + 0x7E, 0x42, 0x42, 0x42, 0x3C, 0x00, + 0x7E, 0x4A, 0x4A, 0x4A, 0x4A, 0x00, + 0x7E, 0x0A, 0x0A, 0x0A, 0x0A, 0x00, + 0x3C, 0x42, 0x42, 0x52, 0x72, 0x00, + 0x7E, 0x08, 0x08, 0x08, 0x7E, 0x00, + 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x42, 0x3E, 0x00, 0x00, + 0x7E, 0x10, 0x08, 0x14, 0x62, 0x00, + 0x7E, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7E, 0x04, 0x08, 0x04, 0x7E, 0x00, + 0x7E, 0x04, 0x08, 0x10, 0x7E, 0x00, + 0x3C, 0x42, 0x42, 0x42, 0x3C, 0x00, + 0x7E, 0x12, 0x12, 0x12, 0x0C, 0x00, + 0x3C, 0x42, 0x52, 0x22, 0x5C, 0x00, + 0x7C, 0x12, 0x12, 0x32, 0x5E, 0x00, + 0x4C, 0x4A, 0x4A, 0x4A, 0x32, 0x00, + 0x02, 0x02, 0x7E, 0x02, 0x02, 0x00, + 0x3E, 0x40, 0x40, 0x40, 0x3E, 0x00, + 0x1E, 0x20, 0x40, 0x20, 0x1E, 0x00, + 0x3E, 0x40, 0x38, 0x40, 0x3E, 0x00, + 0x62, 0x14, 0x08, 0x14, 0x62, 0x00, + 0x06, 0x08, 0x70, 0x08, 0x06, 0x00, + 0x62, 0x52, 0x4A, 0x46, 0x42, 0x00, + 0x00, 0x7E, 0x42, 0x42, 0x00, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x00, 0x42, 0x42, 0x7E, 0x00, + 0x08, 0x04, 0x02, 0x04, 0x08, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x00, 0x06, 0x0A, 0x00, 0x00, + 0x60, 0x54, 0x54, 0x54, 0x7C, 0x00, + 0x7E, 0x48, 0x48, 0x48, 0x30, 0x00, + 0x30, 0x48, 0x48, 0x48, 0x48, 0x00, + 0x30, 0x48, 0x48, 0x48, 0x7E, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x58, 0x00, + 0x00, 0x08, 0x7C, 0x0A, 0x00, 0x00, + 0x98, 0xA4, 0xA4, 0xA4, 0x78, 0x00, + 0x7E, 0x08, 0x08, 0x08, 0x70, 0x00, + 0x00, 0x00, 0x7A, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3A, 0x00, 0x00, + 0x7E, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x00, 0x7E, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x04, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x24, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x24, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x00, 0x04, 0x7E, 0x44, 0x00, 0x00, + 0x3C, 0x40, 0x40, 0x40, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x5C, 0xA0, 0xA0, 0xA0, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0xFE, 0xC1, 0xC1, 0xC9, 0xC5, 0xDD, + 0xC5, 0xC9, 0xC1, 0xC1, 0xFE, 0x00, + 0xFC, 0xFE, 0xFE, 0xEE, 0xF6, 0xC6, + 0xF6, 0xEE, 0xFE, 0xFE, 0xFC, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x7E, 0xFF, 0x81, 0xBF, 0xBF, 0xBF, + 0xBF, 0xF9, 0xF7, 0x8F, 0xF7, 0xF9, + 0xFF, 0x83, 0xED, 0xED, 0xCD, 0xA3, + 0xFF, 0x7E, 0x00, 0x00, 0x00, 0x00, + 0x7E, 0xFF, 0x81, 0xB5, 0xB5, 0xB5, + 0xB5, 0xFF, 0x81, 0xFB, 0xF7, 0xEF, + 0x81, 0xFF, 0xC3, 0xBD, 0xBD, 0xBD, + 0xBD, 0xFF, 0x7E, 0x00, 0x00, 0x00, + 0xFE, 0x01, 0xF1, 0xF1, 0x09, 0x05, + 0xFD, 0x91, 0x61, 0x91, 0x01, 0xFE, + 0xFE, 0x01, 0xFD, 0xF9, 0xF1, 0x61, + 0x01, 0xFD, 0x01, 0xFD, 0x01, 0xFE, + 0xFE, 0x01, 0x61, 0xF1, 0xF9, 0xFD, + 0x61, 0xF1, 0xF9, 0xFD, 0x01, 0xFE, + 0xFE, 0x01, 0xFD, 0xF9, 0xF1, 0x61, + 0xFD, 0xF9, 0xF1, 0x61, 0x01, 0xFE, + 0xFE, 0x01, 0x01, 0xFD, 0x01, 0x61, + 0xF1, 0xF9, 0xFD, 0x01, 0x01, 0xFE, + 0xFE, 0x01, 0x01, 0xFD, 0xF9, 0xF1, + 0x61, 0x01, 0xFD, 0x01, 0x01, 0xFE, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF0, 0x08, 0x04, 0xC4, 0x24, 0x24, + 0x24, 0xC4, 0x04, 0x08, 0xF0, 0x00, + 0xF0, 0xF8, 0xFC, 0x3C, 0xDC, 0xDC, + 0xDC, 0x3C, 0xFC, 0xF8, 0xF0, 0x00, + 0xFE, 0xC1, 0xC1, 0xC9, 0xC5, 0xDD, + 0xC5, 0xC9, 0xC1, 0xC1, 0xFE, 0x00, + 0xFC, 0xFE, 0xFE, 0xEE, 0xF6, 0xC6, + 0xF6, 0xEE, 0xFE, 0xFE, 0xFC, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFE, 0x01, 0x01, 0xF9, 0xF9, 0xF9, + 0xF9, 0xF9, 0xF9, 0x01, 0x01, 0xFE, + 0xFE, 0x01, 0xE1, 0xE1, 0x11, 0x09, + 0xF9, 0x01, 0x09, 0xF1, 0x01, 0xFE, + 0xFE, 0x01, 0x01, 0x21, 0x31, 0xF9, + 0xF9, 0x31, 0x21, 0x01, 0x01, 0xFE, + 0xFE, 0x01, 0x01, 0x41, 0xC1, 0xF9, + 0xF9, 0xC1, 0x41, 0x01, 0x01, 0xFE, + 0x07, 0x08, 0x08, 0x08, 0x09, 0x0A, + 0x0B, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x0B, 0x09, 0x08, 0x08, + 0x08, 0x0B, 0x08, 0x0B, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x08, 0x09, 0x0B, + 0x08, 0x08, 0x09, 0x0B, 0x08, 0x07, + 0x07, 0x08, 0x0B, 0x09, 0x08, 0x08, + 0x0B, 0x09, 0x08, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x0B, 0x08, 0x08, + 0x08, 0x09, 0x0B, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x0B, 0x09, 0x08, + 0x08, 0x08, 0x0B, 0x08, 0x08, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x08, 0x10, 0x13, 0x11, 0x11, + 0x11, 0x13, 0x10, 0x08, 0x07, 0x00, + 0x07, 0x0F, 0x1F, 0x1C, 0x1E, 0x1E, + 0x1E, 0x1C, 0x1F, 0x0F, 0x07, 0x00, + 0xFE, 0x01, 0xF1, 0xF9, 0xFD, 0xFD, + 0x05, 0x05, 0x09, 0xF1, 0x01, 0xFE, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x08, 0x08, 0x09, 0x09, 0x09, + 0x09, 0x09, 0x09, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x08, 0x09, 0x0A, + 0x0B, 0x08, 0x09, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x08, 0x08, 0x09, + 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x07, 0x08, 0x08, 0x08, 0x08, 0x09, + 0x09, 0x08, 0x08, 0x08, 0x08, 0x07, + 0x00, 0x00, 0x00, 0x04, 0x06, 0x3F, + 0x3F, 0x06, 0x04, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x08, 0x18, 0x3F, + 0x3F, 0x18, 0x08, 0x00, 0x00, 0x00, + 0x1C, 0x1C, 0x22, 0x41, 0x7F, 0x00, + 0x10, 0x18, 0x1C, 0x18, 0x10, 0x00, + 0x1C, 0x1C, 0x22, 0x41, 0x7F, 0x00, + 0x04, 0x0C, 0x1C, 0x0C, 0x04, 0x00, + 0x1C, 0x3E, 0x3E, 0x22, 0x1C, 0x00, + 0x10, 0x18, 0x1C, 0x18, 0x10, 0x00, + 0x1C, 0x3E, 0x3E, 0x22, 0x1C, 0x00, + 0x04, 0x0C, 0x1C, 0x0C, 0x04, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x08, 0x08, 0x09, 0x0B, 0x0B, + 0x0A, 0x0A, 0x09, 0x08, 0x08, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/sendyyeah/pix/keymaps/default/keymap.c b/keyboards/sendyyeah/pix/keymaps/default/keymap.c new file mode 100644 index 00000000000..ab227b9ac30 --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/default/keymap.c @@ -0,0 +1,233 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +#define LAYERNUM 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, TO(1)), + [1] = LAYOUT(KC_TRNS, KC_MSTP, KC_MRWD, KC_MFFD, TO(0)) +}; + +int get_icon_start_position(int key_position) { + if (key_position == 1) { + return 0; + } else { + return (key_position - 1) * 3; + } +} + +void encoder_update_user(uint8_t index, bool clockwise) { + static const char PROGMEM UP_ICON[] = {0x1E,0}; + static const char PROGMEM DOWN_ICON[] = {0x1F,0}; + if (index == 0) { + if (layer_state_is(0)) { + if (clockwise) { + tap_code(KC_VOLU); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(UP_ICON, false); + } else { + tap_code(KC_VOLD); + + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(DOWN_ICON, false); + } + } else { + if (clockwise) { + tap_code(KC_BRIU); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(UP_ICON, false); + } else { + tap_code(KC_BRID); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(DOWN_ICON, false); + } + } + } +} + +#ifdef OLED_DRIVER_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +void draw_mute_icon(int key_position, int row) { + static const char PROGMEM ICON_MUTE_0[] = {0x88, 0x89, 0}; + static const char PROGMEM ICON_MUTE_1[] = {0xA8, 0xA9, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_MUTE_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_MUTE_1, false); +} + +void draw_play_icon(int key_position, int row) { + static const char PROGMEM ICON_PLAY_0[] = {0x8A, 0x8B, 0}; + static const char PROGMEM ICON_PLAY_1[] = {0xAA, 0xAB, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_PLAY_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_PLAY_1, false); +} + +void draw_rewind_icon(int key_position, int row) { + static const char PROGMEM ICON_REWIND_0[] = {0x8C, 0x8D, 0}; + static const char PROGMEM ICON_REWIND_1[] = {0xAC, 0xAD, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_REWIND_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_REWIND_1, false); +} + +void draw_fast_forward_icon(int key_position, int row) { + static const char PROGMEM ICON_FAST_FORWARD_0[] = {0x8E, 0x8F, 0}; + static const char PROGMEM ICON_FAST_FORWARD_1[] = {0xAE, 0xAF, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_FAST_FORWARD_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_FAST_FORWARD_1, false); +} + +void draw_prev_icon(int key_position, int row) { + static const char PROGMEM ICON_PREV_0[] = {0x90, 0x91, 0}; + static const char PROGMEM ICON_PREV_1[] = {0xB0, 0xB1, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_PREV_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_PREV_1, false); +} + +void draw_next_icon(int key_position, int row) { + static const char PROGMEM ICON_NEXT_0[] = {0x92, 0x93, 0}; + static const char PROGMEM ICON_NEXT_1[] = {0xB2, 0xB3, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_NEXT_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_NEXT_1, false); +} + +void draw_stop_icon(int key_position, int row) { + static const char PROGMEM ICON_STOP_0[] = {0xA0, 0xA1, 0}; + static const char PROGMEM ICON_STOP_1[] = {0xC0, 0xC1, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_STOP_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_STOP_1, false); +} + +void draw_sound_icon(int key_position, int row) { + static const char PROGMEM ICON_SOUND_0[] = {0xA2, 0xA3, 0}; + static const char PROGMEM ICON_SOUND_1[] = {0xC2, 0xC3, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_SOUND_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_SOUND_1, false); +} + +void draw_raise_icon(int key_position, int row) { + static const char PROGMEM ICON_RAISE_0[] = {0xA4, 0xA5, 0}; + static const char PROGMEM ICON_RAISE_1[] = {0xC4, 0xC5, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_RAISE_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_RAISE_1, false); +} + +void draw_lower_icon(int key_position, int row) { + static const char PROGMEM ICON_LOWER_0[] = {0xA6, 0xA7, 0}; + static const char PROGMEM ICON_LOWER_1[] = {0xC6, 0xC7, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_LOWER_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_LOWER_1, false); +} + +void draw_brightness_icon(int key_position, int row) { + static const char PROGMEM ICON_BRIGHTNESS_0[] = {0xB9, 0xBA, 0}; + static const char PROGMEM ICON_BRIGHTNESS_1[] = {0xD9, 0xDA, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_BRIGHTNESS_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_BRIGHTNESS_1, false); +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + static const char PROGMEM ICON_LAYER[] = {0x80, 0x81, 0x82, 0x83, 0}; + static const char PROGMEM ICON_ENCODER[] = {0x84, 0x85, 0x86, 0x87, 0}; + // static const char PROGMEM ICON_MUTE[] = {0x88, 0x89,0xA9, 0xAA}; + + oled_write_P(ICON_LAYER, false); + + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("1ST "), false); + break; + case 1: + oled_write_P(PSTR("2ND "), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_P(PSTR("UNDF"), false); + } + + oled_write_P(PSTR(" "), false); + + oled_write_P(ICON_ENCODER, false); + switch(get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("VOL "), false); + break; + case 1: + oled_write_P(PSTR("BRGT"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_P(PSTR("UNDF"), false); + } + + switch(get_highest_layer(layer_state)) { + default: + case 0: + draw_mute_icon(1, 2); + draw_play_icon(2, 2); + draw_prev_icon(3, 2); + draw_next_icon(4, 2); + draw_raise_icon(5, 2); + draw_sound_icon(6, 2); + break; + case 1: + draw_mute_icon(1, 2); + draw_stop_icon(2, 2); + draw_rewind_icon(3, 2); + draw_fast_forward_icon(4, 2); + draw_lower_icon(5, 2); + draw_brightness_icon(6, 2); + break; + } + +} + +#endif diff --git a/keyboards/sendyyeah/pix/keymaps/default/readme.md b/keyboards/sendyyeah/pix/keymaps/default/readme.md new file mode 100644 index 00000000000..ed2163ac9d8 --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/default/readme.md @@ -0,0 +1,7 @@ +# Default Pix Layout + +The default layer of Pix +``` +Layer 0: Mute, Play / Pause, Previous, Next, To Next Layer +Layer 1: ____, Print Screen, ________, ____, To Previous Layer +``` diff --git a/keyboards/sendyyeah/pix/keymaps/via/keymap.c b/keyboards/sendyyeah/pix/keymaps/via/keymap.c new file mode 100644 index 00000000000..ab227b9ac30 --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/via/keymap.c @@ -0,0 +1,233 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +#define LAYERNUM 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_MUTE, KC_MPLY, KC_MPRV, KC_MNXT, TO(1)), + [1] = LAYOUT(KC_TRNS, KC_MSTP, KC_MRWD, KC_MFFD, TO(0)) +}; + +int get_icon_start_position(int key_position) { + if (key_position == 1) { + return 0; + } else { + return (key_position - 1) * 3; + } +} + +void encoder_update_user(uint8_t index, bool clockwise) { + static const char PROGMEM UP_ICON[] = {0x1E,0}; + static const char PROGMEM DOWN_ICON[] = {0x1F,0}; + if (index == 0) { + if (layer_state_is(0)) { + if (clockwise) { + tap_code(KC_VOLU); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(UP_ICON, false); + } else { + tap_code(KC_VOLD); + + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(DOWN_ICON, false); + } + } else { + if (clockwise) { + tap_code(KC_BRIU); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(UP_ICON, false); + } else { + tap_code(KC_BRID); + oled_set_cursor(get_icon_start_position(7), 2); + oled_write_P(PSTR(" "), false); + oled_set_cursor(get_icon_start_position(7), 3); + oled_write_P(DOWN_ICON, false); + } + } + } +} + +#ifdef OLED_DRIVER_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +void draw_mute_icon(int key_position, int row) { + static const char PROGMEM ICON_MUTE_0[] = {0x88, 0x89, 0}; + static const char PROGMEM ICON_MUTE_1[] = {0xA8, 0xA9, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_MUTE_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_MUTE_1, false); +} + +void draw_play_icon(int key_position, int row) { + static const char PROGMEM ICON_PLAY_0[] = {0x8A, 0x8B, 0}; + static const char PROGMEM ICON_PLAY_1[] = {0xAA, 0xAB, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_PLAY_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_PLAY_1, false); +} + +void draw_rewind_icon(int key_position, int row) { + static const char PROGMEM ICON_REWIND_0[] = {0x8C, 0x8D, 0}; + static const char PROGMEM ICON_REWIND_1[] = {0xAC, 0xAD, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_REWIND_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_REWIND_1, false); +} + +void draw_fast_forward_icon(int key_position, int row) { + static const char PROGMEM ICON_FAST_FORWARD_0[] = {0x8E, 0x8F, 0}; + static const char PROGMEM ICON_FAST_FORWARD_1[] = {0xAE, 0xAF, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_FAST_FORWARD_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_FAST_FORWARD_1, false); +} + +void draw_prev_icon(int key_position, int row) { + static const char PROGMEM ICON_PREV_0[] = {0x90, 0x91, 0}; + static const char PROGMEM ICON_PREV_1[] = {0xB0, 0xB1, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_PREV_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_PREV_1, false); +} + +void draw_next_icon(int key_position, int row) { + static const char PROGMEM ICON_NEXT_0[] = {0x92, 0x93, 0}; + static const char PROGMEM ICON_NEXT_1[] = {0xB2, 0xB3, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_NEXT_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_NEXT_1, false); +} + +void draw_stop_icon(int key_position, int row) { + static const char PROGMEM ICON_STOP_0[] = {0xA0, 0xA1, 0}; + static const char PROGMEM ICON_STOP_1[] = {0xC0, 0xC1, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_STOP_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_STOP_1, false); +} + +void draw_sound_icon(int key_position, int row) { + static const char PROGMEM ICON_SOUND_0[] = {0xA2, 0xA3, 0}; + static const char PROGMEM ICON_SOUND_1[] = {0xC2, 0xC3, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_SOUND_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_SOUND_1, false); +} + +void draw_raise_icon(int key_position, int row) { + static const char PROGMEM ICON_RAISE_0[] = {0xA4, 0xA5, 0}; + static const char PROGMEM ICON_RAISE_1[] = {0xC4, 0xC5, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_RAISE_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_RAISE_1, false); +} + +void draw_lower_icon(int key_position, int row) { + static const char PROGMEM ICON_LOWER_0[] = {0xA6, 0xA7, 0}; + static const char PROGMEM ICON_LOWER_1[] = {0xC6, 0xC7, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_LOWER_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_LOWER_1, false); +} + +void draw_brightness_icon(int key_position, int row) { + static const char PROGMEM ICON_BRIGHTNESS_0[] = {0xB9, 0xBA, 0}; + static const char PROGMEM ICON_BRIGHTNESS_1[] = {0xD9, 0xDA, 0}; + oled_set_cursor(get_icon_start_position(key_position), row); + oled_write_P(ICON_BRIGHTNESS_0, false); + oled_set_cursor(get_icon_start_position(key_position), row + 1); + oled_write_P(ICON_BRIGHTNESS_1, false); +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + static const char PROGMEM ICON_LAYER[] = {0x80, 0x81, 0x82, 0x83, 0}; + static const char PROGMEM ICON_ENCODER[] = {0x84, 0x85, 0x86, 0x87, 0}; + // static const char PROGMEM ICON_MUTE[] = {0x88, 0x89,0xA9, 0xAA}; + + oled_write_P(ICON_LAYER, false); + + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("1ST "), false); + break; + case 1: + oled_write_P(PSTR("2ND "), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_P(PSTR("UNDF"), false); + } + + oled_write_P(PSTR(" "), false); + + oled_write_P(ICON_ENCODER, false); + switch(get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("VOL "), false); + break; + case 1: + oled_write_P(PSTR("BRGT"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_P(PSTR("UNDF"), false); + } + + switch(get_highest_layer(layer_state)) { + default: + case 0: + draw_mute_icon(1, 2); + draw_play_icon(2, 2); + draw_prev_icon(3, 2); + draw_next_icon(4, 2); + draw_raise_icon(5, 2); + draw_sound_icon(6, 2); + break; + case 1: + draw_mute_icon(1, 2); + draw_stop_icon(2, 2); + draw_rewind_icon(3, 2); + draw_fast_forward_icon(4, 2); + draw_lower_icon(5, 2); + draw_brightness_icon(6, 2); + break; + } + +} + +#endif diff --git a/keyboards/sendyyeah/pix/keymaps/via/readme.md b/keyboards/sendyyeah/pix/keymaps/via/readme.md new file mode 100644 index 00000000000..9343c1f1dfb --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/via/readme.md @@ -0,0 +1,7 @@ +# Default Pix Layout with VIA Support + +The default layer of Pix +``` +Layer 0: Mute, Play / Pause, Previous, Next, To Next Layer +Layer 1: ____, Print Screen, ________, ____, To Previous Layer +``` diff --git a/keyboards/sendyyeah/pix/keymaps/via/rules.mk b/keyboards/sendyyeah/pix/keymaps/via/rules.mk new file mode 100644 index 00000000000..36b7ba9cbc9 --- /dev/null +++ b/keyboards/sendyyeah/pix/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/sendyyeah/pix/pix.c b/keyboards/sendyyeah/pix/pix.c new file mode 100644 index 00000000000..f8d1b1c4d1c --- /dev/null +++ b/keyboards/sendyyeah/pix/pix.c @@ -0,0 +1,30 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "pix.h" + +void eeconfig_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB underglow by default + rgblight_sethsv(0, 255, 255); +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 5); // Set to RGB_RAINBOW_SWIRL animation by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/sendyyeah/pix/pix.h b/keyboards/sendyyeah/pix/pix.h new file mode 100644 index 00000000000..a46792855f0 --- /dev/null +++ b/keyboards/sendyyeah/pix/pix.h @@ -0,0 +1,23 @@ + /* Copyright 2020 sendyyeah + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT(K00, K01, K02, K03, K04) { \ + { K00, K01, K02, K03, K04 }, \ +} diff --git a/keyboards/sendyyeah/pix/readme.md b/keyboards/sendyyeah/pix/readme.md new file mode 100644 index 00000000000..b2c903ed958 --- /dev/null +++ b/keyboards/sendyyeah/pix/readme.md @@ -0,0 +1,19 @@ +# Pix + +![Pix](https://i.imgur.com/ZcuDN6zl.jpg) + +A mini 1x4 macropad with rotary encoders and OLED screen. Currently the PCB and kits can only be purchased in Indonesia. The PCB source will be available soon on github. + +* Keyboard Maintainer: [sendz](https://github.com/sendz) +* Hardware Supported: Pix PCB, Arduino Pro Micro, EC11 Rotary Encoder, OLED Screen, Acrylic Case, Encoder Knob +* Hardware Availability: [Tokopedia/Sell Stuffs](https://tokopedia.com/sell-stuffs) (Indonesia only) or any electronic part store. + +Make example for this keyboard (after setting up your build environment): + + make sendyyeah/pix:default + +How to reset and enter bootloader: + - Press reset button on the right side of the PCB (twice if the ProMicro is fresh) + - Flash with QMK Toolbox or any command line you like + + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sendyyeah/pix/rules.mk b/keyboards/sendyyeah/pix/rules.mk new file mode 100644 index 00000000000..956a61880b9 --- /dev/null +++ b/keyboards/sendyyeah/pix/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes +OLED_DRIVER_ENABLE = yes From 010271d6ea08b58415d3ecd3e8acb37aeb4372bb Mon Sep 17 00:00:00 2001 From: Jan Christoph Ebersbach Date: Thu, 24 Dec 2020 23:12:19 +0100 Subject: [PATCH 013/145] Implement kinetic mouse movement algorithm (#6739) * Implement kinetic mouse movement algorithm * Adjust mouse wheel speed * Remove unused math.h include * Wrap mouse_timer definition in ifdef * Replace double space by single space * Clarify documentation of kinetic mouse speed Co-Authored-By: lf * Clarify documentation of kinetic mouse speed Co-Authored-By: lf * Remove superfluous definition of speed * fix(variable): remove unused variable Co-authored-by: lf --- docs/feature_mouse_keys.md | 28 ++++++++++++- tmk_core/common/mousekey.c | 82 +++++++++++++++++++++++++++++++++++++- tmk_core/common/mousekey.h | 37 +++++++++++++++++ 3 files changed, 144 insertions(+), 3 deletions(-) diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md index ffde1338924..a0d02416f28 100644 --- a/docs/feature_mouse_keys.md +++ b/docs/feature_mouse_keys.md @@ -42,6 +42,7 @@ In your keymap you can use the following keycodes to map key presses to mouse ac Mouse keys supports three different modes to move the cursor: * **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed. +* **Kinetic:** Holding movement keys accelerates the cursor with its speed following a quadratic curve until it reaches its maximum speed. * **Constant:** Holding movement keys moves the cursor at constant speeds. * **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds. @@ -56,7 +57,8 @@ This is the default mode. You can adjust the cursor and scrolling acceleration u |Define |Default|Description | |----------------------------|-------|---------------------------------------------------------| |`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement| -|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements | +|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements in milliseconds | +|`MOUSEKEY_MOVE_DELTA` |5 |Step size | |`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops | |`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached | |`MOUSEKEY_WHEEL_DELAY` |300 |Delay between pressing a wheel key and wheel movement | @@ -73,6 +75,30 @@ Tips: Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys). +### Kinetic Mode + +This is an extension of the accelerated mode. The kinetic mode uses a quadratic curve on the cursor speed which allows precise movements at the beginning and allows to cover large distances by increasing cursor speed quickly thereafter. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file: + +|Define |Default |Description | +|--------------------------------------|---------|---------------------------------------------------------------| +|`MK_KINETIC_SPEED` |undefined|Enable kinetic mode | +|`MOUSEKEY_DELAY` |8 |Delay between pressing a movement key and cursor movement | +|`MOUSEKEY_INTERVAL` |8 |Time between cursor movements in milliseconds | +|`MOUSEKEY_MOVE_DELTA` |25 |Step size for accelerating from initial to base speed | +|`MOUSEKEY_INITIAL_SPEED` |100 |Initial speed of the cursor in pixel per second | +|`MOUSEKEY_BASE_SPEED` |1000 |Maximum cursor speed at which acceleration stops | +|`MOUSEKEY_DECELERATED_SPEED` |400 |Decelerated cursor speed | +|`MOUSEKEY_ACCELERATED_SPEED` |3000 |Accelerated cursor speed | +|`MOUSEKEY_WHEEL_INITIAL_MOVEMENTS` |16 |Initial number of movements of the mouse wheel | +|`MOUSEKEY_WHEEL_BASE_MOVEMENTS` |32 |Maximum number of movements at which acceleration stops | +|`MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS`|48 |Accelerated wheel movements | +|`MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS`|8 |Decelerated wheel movements | + +Tips: + +* The smoothness of the cursor movement depends on the `MOUSEKEY_INTERVAL` setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of `8` milliseconds, `125` movements per second will be initiated. With a base speed of `1000` each movement will move the cursor by `8` pixels. +* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `1`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second. + ### Constant mode In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting. diff --git a/tmk_core/common/mousekey.c b/tmk_core/common/mousekey.c index ef18bcf1a8a..697e0692c01 100644 --- a/tmk_core/common/mousekey.c +++ b/tmk_core/common/mousekey.c @@ -36,6 +36,9 @@ static void mousekey_debug(void); static uint8_t mousekey_accel = 0; static uint8_t mousekey_repeat = 0; static uint8_t mousekey_wheel_repeat = 0; +#ifdef MK_KINETIC_SPEED +static uint16_t mouse_timer = 0; +#endif #ifndef MK_3_SPEED @@ -43,7 +46,7 @@ static uint16_t last_timer_c = 0; static uint16_t last_timer_w = 0; /* - * Mouse keys acceleration algorithm + * Mouse keys acceleration algorithm * http://en.wikipedia.org/wiki/Mouse_keys * * speed = delta * max_speed * (repeat / time_to_max)**((1000+curve)/1000) @@ -105,6 +108,69 @@ static uint8_t wheel_unit(void) { } # else /* #ifndef MK_COMBINED */ +# ifndef MK_KINETIC_SPEED + +/* + * Kinetic movement acceleration algorithm + * + * current speed = I + A * T/50 + A * 0.5 * T^2 | maximum B + * + * T: time since the mouse movement started + * E: mouse events per second (set through MOUSEKEY_INTERVAL, UHK sends 250, the + * pro micro on my Signum 3.0 sends only 125!) + * I: initial speed at time 0 + * A: acceleration + * B: base mouse travel speed + */ +const uint16_t mk_accelerated_speed = MOUSEKEY_ACCELERATED_SPEED; +const uint16_t mk_base_speed = MOUSEKEY_BASE_SPEED; +const uint16_t mk_decelerated_speed = MOUSEKEY_DECELERATED_SPEED; +const uint16_t mk_initial_speed = MOUSEKEY_INITIAL_SPEED; + +static uint8_t move_unit(void) { + float speed = mk_initial_speed; + + if (mousekey_accel & ((1<<0) | (1<<2))) { + speed = mousekey_accel & (1<<2) ? mk_accelerated_speed : mk_decelerated_speed; + } else if (mousekey_repeat && mouse_timer) { + const float time_elapsed = timer_elapsed(mouse_timer) / 50; + speed = mk_initial_speed + + MOUSEKEY_MOVE_DELTA * time_elapsed + + MOUSEKEY_MOVE_DELTA * 0.5 * time_elapsed * time_elapsed; + + speed = speed > mk_base_speed ? mk_base_speed : speed; + } + + /* convert speed to USB mouse speed 1 to 127 */ + speed = (uint8_t)(speed / (1000.0f / mk_interval)); + speed = speed < 1 ? 1 : speed; + + return speed > MOUSEKEY_MOVE_MAX ? MOUSEKEY_MOVE_MAX : speed; +} + +float mk_wheel_interval = 1000.0f / MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; + +static uint8_t wheel_unit(void) { + float speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; + + if (mousekey_accel & ((1<<0) | (1<<2))) { + speed = mousekey_accel & (1<<2) ? MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS : MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS; + } else if (mousekey_repeat && mouse_timer) { + if (mk_wheel_interval != MOUSEKEY_WHEEL_BASE_MOVEMENTS) { + const float time_elapsed = timer_elapsed(mouse_timer) / 50; + speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS + + 1 * time_elapsed + + 1 * 0.5 * time_elapsed * time_elapsed; + } + speed = speed > MOUSEKEY_WHEEL_BASE_MOVEMENTS ? MOUSEKEY_WHEEL_BASE_MOVEMENTS : speed; + } + + mk_wheel_interval = 1000.0f / speed; + + return 1; +} + +# else /* #ifndef MK_KINETIC_SPEED */ static uint8_t move_unit(void) { uint16_t unit; @@ -142,6 +208,7 @@ static uint8_t wheel_unit(void) { return (unit > MOUSEKEY_WHEEL_MAX ? MOUSEKEY_WHEEL_MAX : (unit == 0 ? 1 : unit)); } +# endif /* #ifndef MK_KINETIC_SPEED */ # endif /* #ifndef MK_COMBINED */ void mousekey_task(void) { @@ -193,6 +260,12 @@ void mousekey_task(void) { } void mousekey_on(uint8_t code) { +#ifdef MK_KINETIC_SPEED + if (mouse_timer == 0) { + mouse_timer = timer_read(); + } +#endif /* #ifdef MK_KINETIC_SPEED */ + if (code == KC_MS_UP) mouse_report.y = move_unit() * -1; else if (code == KC_MS_DOWN) @@ -260,7 +333,12 @@ void mousekey_off(uint8_t code) { mousekey_accel &= ~(1 << 1); else if (code == KC_MS_ACCEL2) mousekey_accel &= ~(1 << 2); - if (mouse_report.x == 0 && mouse_report.y == 0) mousekey_repeat = 0; + if (mouse_report.x == 0 && mouse_report.y == 0) { + mousekey_repeat = 0; +#ifdef MK_KINETIC_SPEED + mouse_timer = 0; +#endif /* #ifdef MK_KINETIC_SPEED */ + } if (mouse_report.v == 0 && mouse_report.h == 0) mousekey_wheel_repeat = 0; } diff --git a/tmk_core/common/mousekey.h b/tmk_core/common/mousekey.h index 05e4538234e..703854b8261 100644 --- a/tmk_core/common/mousekey.h +++ b/tmk_core/common/mousekey.h @@ -38,16 +38,28 @@ along with this program. If not, see . # endif # ifndef MOUSEKEY_MOVE_DELTA +#ifndef MK_KINETIC_SPEED # define MOUSEKEY_MOVE_DELTA 5 +#else +# define MOUSEKEY_MOVE_DELTA 25 +#endif # endif # ifndef MOUSEKEY_WHEEL_DELTA # define MOUSEKEY_WHEEL_DELTA 1 # endif # ifndef MOUSEKEY_DELAY +#ifndef MK_KINETIC_SPEED # define MOUSEKEY_DELAY 300 +#else +# define MOUSEKEY_DELAY 8 +#endif # endif # ifndef MOUSEKEY_INTERVAL +#ifndef MK_KINETIC_SPEED # define MOUSEKEY_INTERVAL 50 +#else +# define MOUSEKEY_INTERVAL 8 +#endif # endif # ifndef MOUSEKEY_MAX_SPEED # define MOUSEKEY_MAX_SPEED 10 @@ -68,6 +80,31 @@ along with this program. If not, see . # define MOUSEKEY_WHEEL_TIME_TO_MAX 40 # endif +#ifndef MOUSEKEY_INITIAL_SPEED +#define MOUSEKEY_INITIAL_SPEED 100 +#endif +#ifndef MOUSEKEY_BASE_SPEED +#define MOUSEKEY_BASE_SPEED 1000 +#endif +#ifndef MOUSEKEY_DECELERATED_SPEED +#define MOUSEKEY_DECELERATED_SPEED 400 +#endif +#ifndef MOUSEKEY_ACCELERATED_SPEED +#define MOUSEKEY_ACCELERATED_SPEED 3000 +#endif +#ifndef MOUSEKEY_WHEEL_INITIAL_MOVEMENTS +#define MOUSEKEY_WHEEL_INITIAL_MOVEMENTS 16 +#endif +#ifndef MOUSEKEY_WHEEL_BASE_MOVEMENTS +#define MOUSEKEY_WHEEL_BASE_MOVEMENTS 32 +#endif +#ifndef MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS +#define MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS 48 +#endif +#ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS +#define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8 +#endif + #else /* #ifndef MK_3_SPEED */ # ifndef MK_C_OFFSET_UNMOD From 73dfc2b36887b0580bf534a520baaad3fae0f613 Mon Sep 17 00:00:00 2001 From: George Mao Date: Thu, 24 Dec 2020 14:53:16 -0800 Subject: [PATCH 014/145] [Keyboard] Refactor Jacky's boards (Bear65 and S7 Elephant) (#10528) --- keyboards/jacky_studio/bear_65/bear_65.c | 17 + keyboards/jacky_studio/bear_65/bear_65.h | 47 + keyboards/jacky_studio/bear_65/config.h | 75 + keyboards/jacky_studio/bear_65/info.json | 15 + .../bear_65/keymaps/default/keymap.c | 40 + .../bear_65/keymaps/default/readme.md | 1 + .../jacky_studio/bear_65/keymaps/via/keymap.c | 48 + .../bear_65/keymaps/via/readme.md | 1 + .../jacky_studio/bear_65/keymaps/via/rules.mk | 1 + keyboards/jacky_studio/bear_65/readme.md | 19 + keyboards/jacky_studio/bear_65/rules.mk | 24 + keyboards/jacky_studio/s7_elephant/readme.md | 20 + .../jacky_studio/s7_elephant/rev1/config.h | 63 + .../jacky_studio/s7_elephant/rev1/info.json | 2318 +++++++++++++++++ .../s7_elephant/rev1/keymaps/default/config.h | 19 + .../s7_elephant/rev1/keymaps/default/keymap.c | 81 + .../rev1/keymaps/default/readme.md | 35 + .../jacky_studio/s7_elephant/rev1/readme.md | 17 + .../jacky_studio/s7_elephant/rev1/rev1.c | 17 + .../jacky_studio/s7_elephant/rev1/rev1.h | 869 ++++++ .../jacky_studio/s7_elephant/rev1/rules.mk | 18 + .../jacky_studio/s7_elephant/rev2/config.h | 78 + .../jacky_studio/s7_elephant/rev2/info.json | 165 ++ .../s7_elephant/rev2/keymaps/default/keymap.c | 81 + .../rev2/keymaps/default/readme.md | 35 + .../s7_elephant/rev2/keymaps/via/keymap.c | 108 + .../s7_elephant/rev2/keymaps/via/readme.md | 35 + .../s7_elephant/rev2/keymaps/via/rules.mk | 1 + .../jacky_studio/s7_elephant/rev2/readme.md | 17 + .../jacky_studio/s7_elephant/rev2/rev2.c | 17 + .../jacky_studio/s7_elephant/rev2/rev2.h | 77 + .../jacky_studio/s7_elephant/rev2/rules.mk | 23 + 32 files changed, 4382 insertions(+) create mode 100644 keyboards/jacky_studio/bear_65/bear_65.c create mode 100644 keyboards/jacky_studio/bear_65/bear_65.h create mode 100644 keyboards/jacky_studio/bear_65/config.h create mode 100644 keyboards/jacky_studio/bear_65/info.json create mode 100644 keyboards/jacky_studio/bear_65/keymaps/default/keymap.c create mode 100644 keyboards/jacky_studio/bear_65/keymaps/default/readme.md create mode 100644 keyboards/jacky_studio/bear_65/keymaps/via/keymap.c create mode 100644 keyboards/jacky_studio/bear_65/keymaps/via/readme.md create mode 100644 keyboards/jacky_studio/bear_65/keymaps/via/rules.mk create mode 100644 keyboards/jacky_studio/bear_65/readme.md create mode 100644 keyboards/jacky_studio/bear_65/rules.mk create mode 100644 keyboards/jacky_studio/s7_elephant/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/config.h create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/info.json create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/config.h create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/keymap.c create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/rev1.c create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/rev1.h create mode 100644 keyboards/jacky_studio/s7_elephant/rev1/rules.mk create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/config.h create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/info.json create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/keymap.c create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/keymap.c create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/rules.mk create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/readme.md create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/rev2.c create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/rev2.h create mode 100644 keyboards/jacky_studio/s7_elephant/rev2/rules.mk diff --git a/keyboards/jacky_studio/bear_65/bear_65.c b/keyboards/jacky_studio/bear_65/bear_65.c new file mode 100644 index 00000000000..a2ae572b82d --- /dev/null +++ b/keyboards/jacky_studio/bear_65/bear_65.c @@ -0,0 +1,17 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bear_65.h" diff --git a/keyboards/jacky_studio/bear_65/bear_65.h b/keyboards/jacky_studio/bear_65/bear_65.h new file mode 100644 index 00000000000..872436fcd46 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/bear_65.h @@ -0,0 +1,47 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ + K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + +#define LAYOUT_full_bs( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K4E, \ + K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} diff --git a/keyboards/jacky_studio/bear_65/config.h b/keyboards/jacky_studio/bear_65/config.h new file mode 100644 index 00000000000..476d119afff --- /dev/null +++ b/keyboards/jacky_studio/bear_65/config.h @@ -0,0 +1,75 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA13B // Jacky's vendor ID, arbitrarily selected by MudkipMao +#define PRODUCT_ID 0x000A +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jacky +#define PRODUCT Jacky Bear 65 Ergo + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 } + +/* Setting the matrix value of top left key for bootmagic lite */ +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 1 + +#define DIODE_DIRECTION ROW2COL + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 4 + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 15 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 139 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/jacky_studio/bear_65/info.json b/keyboards/jacky_studio/bear_65/info.json new file mode 100644 index 00000000000..67fc090af83 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Bear 65", + "url": "https://qmk.fm/keyboards", + "maintainer": "qmk", + "width": 20.75, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"|", "x":17.25, "y":0}, {"label":"~", "x":18.25, "y":0}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"Backspace", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] + }, + "LAYOUT_full_bs": { + "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"Backspace", "x":17.25, "y":0, "w":2}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"|", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] + } + } +} diff --git a/keyboards/jacky_studio/bear_65/keymaps/default/keymap.c b/keyboards/jacky_studio/bear_65/keymaps/default/keymap.c new file mode 100644 index 00000000000..c6be30aeaf8 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_DEL, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_all( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, + RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ) +}; diff --git a/keyboards/jacky_studio/bear_65/keymaps/default/readme.md b/keyboards/jacky_studio/bear_65/keymaps/default/readme.md new file mode 100644 index 00000000000..d5173485577 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bear_65 diff --git a/keyboards/jacky_studio/bear_65/keymaps/via/keymap.c b/keyboards/jacky_studio/bear_65/keymaps/via/keymap.c new file mode 100644 index 00000000000..f99c36ab2a2 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_full_bs( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_full_bs( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, + RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ), + [2] = LAYOUT_full_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ), + [3] = LAYOUT_full_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______,_______ + ) +}; diff --git a/keyboards/jacky_studio/bear_65/keymaps/via/readme.md b/keyboards/jacky_studio/bear_65/keymaps/via/readme.md new file mode 100644 index 00000000000..5cb67ab25f3 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/keymaps/via/readme.md @@ -0,0 +1 @@ +# The via keymap for bear_65 diff --git a/keyboards/jacky_studio/bear_65/keymaps/via/rules.mk b/keyboards/jacky_studio/bear_65/keymaps/via/rules.mk new file mode 100644 index 00000000000..1e5b99807cb --- /dev/null +++ b/keyboards/jacky_studio/bear_65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/jacky_studio/bear_65/readme.md b/keyboards/jacky_studio/bear_65/readme.md new file mode 100644 index 00000000000..b816012b927 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/readme.md @@ -0,0 +1,19 @@ +# Bear 65 + +![Bear 65](https://i.imgur.com/W1sVP1Tl.jpg) + +A gasket-mounted 65% keyboard inspired by the [TGR Alice](https://github.com/qmk/qmk_firmware/tree/master/keyboards/tgr/alice). Designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: Bear 65 +* Hardware Availability: The GB happened July 15th 2020, units are still in production + +Make example for this keyboard (after setting up your build environment): + + make jacky_studio/bear_65:default + +Flashing example for this keyboard: + + make jacky_studio/bear_65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jacky_studio/bear_65/rules.mk b/keyboards/jacky_studio/bear_65/rules.mk new file mode 100644 index 00000000000..339c37c7ee0 --- /dev/null +++ b/keyboards/jacky_studio/bear_65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +LTO_ENABLE = yes # Use LTO flags to reduce firmware size diff --git a/keyboards/jacky_studio/s7_elephant/readme.md b/keyboards/jacky_studio/s7_elephant/readme.md new file mode 100644 index 00000000000..1cfeefb2098 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/readme.md @@ -0,0 +1,20 @@ +# S7 Elephant + +![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) + +A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant rev1, rev2 +* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) + +Make example for this keyboard (after setting up your build environment): + + make jacky_studio/s7_elephant/rev1:default # 2018 run + make jacky_studio/s7_elephant/rev2:default # 2019 run + +To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jacky_studio/s7_elephant/rev1/config.h b/keyboards/jacky_studio/s7_elephant/rev1/config.h new file mode 100644 index 00000000000..76c4c7d4068 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/config.h @@ -0,0 +1,63 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID +#define PRODUCT_ID 0x0007 +#define DEVICE_VER 0x0001 +#define MANUFACTURER jacky +#define PRODUCT S7 Elephant + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } +#define MATRIX_COL_PINS { B6, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7, F1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN E6 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 2 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/jacky_studio/s7_elephant/rev1/info.json b/keyboards/jacky_studio/s7_elephant/rev1/info.json new file mode 100644 index 00000000000..ea2ca030c53 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/info.json @@ -0,0 +1,2318 @@ +{ + "keyboard_name": "S7 Elephant", + "url": "https://geekhack.org/index.php?topic=96434.0", + "maintainer": "qmk", + "width": 18, + "height": 5, + "layouts": { + "LAYOUT_ansi": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_small_lshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_small_lshift_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_1u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_1u_small_lshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_1u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_1u_small_lshift_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_7u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_7u_small_lshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_7u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_7u_small_lshift_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_small_lshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_small_lshift_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_7u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":7}, + {"label":"Fn", "x":13, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_7u_small_lshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":7}, + {"label":"Fn", "x":13, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_7u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":2.25}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":7}, + {"label":"Fn", "x":13, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_ansi_blocker_7u_small_lshift_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"|", "x":15.5, "y":1, "w":1.5}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":2, "w":2.25}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":7}, + {"label":"Fn", "x":13, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_1u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_1u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4}, + {"label":"Alt", "x":13, "y":4}, + {"label":"Ctrl", "x":14, "y":4}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_7u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_7u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4, "w":1.5}, + {"x":5, "y":4, "w":7}, + {"label":"Fn", "x":12, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_blocker": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_blocker_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.25}, + {"label":"Win", "x":3.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"x":5.75, "y":4, "w":6.25}, + {"label":"Fn", "x":12, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_blocker_7u": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0, "w":2}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"x":6, "y":4, "w":6.75}, + {"label":"Fn", "x":12.75, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + }, + "LAYOUT_iso_blocker_7u_small_bspc": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"Esc", "x":2, "y":0}, + {"label":"!", "x":3, "y":0}, + {"label":"@", "x":4, "y":0}, + {"label":"#", "x":5, "y":0}, + {"label":"$", "x":6, "y":0}, + {"label":"%", "x":7, "y":0}, + {"label":"^", "x":8, "y":0}, + {"label":"&", "x":9, "y":0}, + {"label":"*", "x":10, "y":0}, + {"label":"(", "x":11, "y":0}, + {"label":")", "x":12, "y":0}, + {"label":"_", "x":13, "y":0}, + {"label":"+", "x":14, "y":0}, + {"label":"Backspace", "x":15, "y":0}, + {"x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"F2", "x":0, "y":1}, + {"label":"Tab", "x":2, "y":1, "w":1.5}, + {"label":"Q", "x":3.5, "y":1}, + {"label":"W", "x":4.5, "y":1}, + {"label":"E", "x":5.5, "y":1}, + {"label":"R", "x":6.5, "y":1}, + {"label":"T", "x":7.5, "y":1}, + {"label":"Y", "x":8.5, "y":1}, + {"label":"U", "x":9.5, "y":1}, + {"label":"I", "x":10.5, "y":1}, + {"label":"O", "x":11.5, "y":1}, + {"label":"P", "x":12.5, "y":1}, + {"label":"{", "x":13.5, "y":1}, + {"label":"}", "x":14.5, "y":1}, + {"label":"End", "x":17, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, + {"label":"A", "x":3.75, "y":2}, + {"label":"S", "x":4.75, "y":2}, + {"label":"D", "x":5.75, "y":2}, + {"label":"F", "x":6.75, "y":2}, + {"label":"G", "x":7.75, "y":2}, + {"label":"H", "x":8.75, "y":2}, + {"label":"J", "x":9.75, "y":2}, + {"label":"K", "x":10.75, "y":2}, + {"label":"L", "x":11.75, "y":2}, + {"label":":", "x":12.75, "y":2}, + {"label":"\"", "x":13.75, "y":2}, + {"label":"|", "x":14.75, "y":2}, + {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, + {"label":"Ins", "x":17, "y":2}, + {"label":"F4", "x":0, "y":3}, + {"label":"Shift", "x":2, "y":3, "w":1.25}, + {"x":3.25, "y":3}, + {"label":"Z", "x":4.25, "y":3}, + {"label":"X", "x":5.25, "y":3}, + {"label":"C", "x":6.25, "y":3}, + {"label":"V", "x":7.25, "y":3}, + {"label":"B", "x":8.25, "y":3}, + {"label":"N", "x":9.25, "y":3}, + {"label":"M", "x":10.25, "y":3}, + {"label":"<", "x":11.25, "y":3}, + {"label":">", "x":12.25, "y":3}, + {"label":"?", "x":13.25, "y":3}, + {"label":"Shift", "x":14.25, "y":3, "w":1.75}, + {"label":"Up", "x":16, "y":3}, + {"label":"Del", "x":17, "y":3}, + {"label":"F5", "x":0, "y":4}, + {"label":"Ctrl", "x":2, "y":4, "w":1.5}, + {"label":"Win", "x":3.5, "y":4}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":7}, + {"label":"Fn", "x":13, "y":4, "w":1.5}, + {"label":"Left", "x":15, "y":4}, + {"label":"Down", "x":16, "y":4}, + {"label":"Right", "x":17, "y":4} + ] + } + } +} diff --git a/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/config.h b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/config.h new file mode 100644 index 00000000000..4cf14d1c45e --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define RGBLIGHT_LIMIT_VAL 80 diff --git a/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/keymap.c b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/keymap.c new file mode 100644 index 00000000000..4b163f34266 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/keymap.c @@ -0,0 +1,81 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum custom_layers { + _QWERTY, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | + * |------| |-------------------------------------------------------------------------------------------------| + * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | + * |------| |-------------------------------------------------------------------------------------------------| + * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | + * |------| |-------------------------------------------------------------------------------------------------| + * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | + * |------| |-------------------------------------------------------------------------------------------------| + * | F5 | | Ctrl | Gui | Alt | Space | FN | RCtrl | L | D | R | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +[_QWERTY] = LAYOUT_ansi( +KC_F1, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, +KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, +KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, +KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT +), + +/* FN + * ,------. ,-------------------------------------------------------------------------------------------------. + * |Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | |PgDn | + * |------| |-------------------------------------------------------------------------------------------------| + * |EEPRST| | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +[_FN] = LAYOUT_ansi( +RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, +_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_PGUP, +_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, +EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), +}; + +bool led_update_user(led_t led_state) { + // Turn LEDs On/Off for Caps Lock + if (led_state.caps_lock) { + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom(0, 0, 80); + } else { + rgblight_sethsv_noeeprom(0, 0, 80); + rgblight_disable_noeeprom(); + } + return false; +} diff --git a/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/readme.md b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/readme.md new file mode 100644 index 00000000000..c4fe30acdd5 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/keymaps/default/readme.md @@ -0,0 +1,35 @@ +# Default keymap for S7 Elephant + +**Features** + +* LEDs are functioning as Caps-Lock indicators + +## QWERTY (Normal) Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | +|------| |-------------------------------------------------------------------------------------------------| +| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | +|------| |-------------------------------------------------------------------------------------------------| +| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | +|------| |-------------------------------------------------------------------------------------------------| +| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | +|------| |-------------------------------------------------------------------------------------------------| +| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | +`------' `-------------------------------------------------------------------------------------------------' +``` + +## FN Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | | | | +|------| |-------------------------------------------------------------------------------------------------| +| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | |PgDn | +|------| |-------------------------------------------------------------------------------------------------| +|EPRM | | | | | | | | | | | | +`------' `-------------------------------------------------------------------------------------------------' +``` diff --git a/keyboards/jacky_studio/s7_elephant/rev1/readme.md b/keyboards/jacky_studio/s7_elephant/rev1/readme.md new file mode 100644 index 00000000000..702be4c3a78 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/readme.md @@ -0,0 +1,17 @@ +# S7 Elephant + +![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) + +A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant +* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) + +Make example for this keyboard (after setting up your build environment): + + make s7_elephant/rev1:default + +To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jacky_studio/s7_elephant/rev1/rev1.c b/keyboards/jacky_studio/s7_elephant/rev1/rev1.c new file mode 100644 index 00000000000..0477a9ef5f0 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/rev1.c @@ -0,0 +1,17 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev1.h" diff --git a/keyboards/jacky_studio/s7_elephant/rev1/rev1.h b/keyboards/jacky_studio/s7_elephant/rev1/rev1.h new file mode 100644 index 00000000000..18b04aaaf94 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/rev1.h @@ -0,0 +1,869 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +/* ANSI + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small shift + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_small_lshift( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small shift and small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_small_lshift_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ANSI with 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* ANSI with small shift and 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u_small_lshift( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* ANSI with small backspace and 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* ANSI with small shift and small backspace and 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u_small_lshift_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ANSI with 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_7u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small shift and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_7u_small_lshift( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_7u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with small shift and small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_ansi_7u_small_lshift_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ANSI with blocker + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_ansi_blocker( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small shift + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_ansi_blocker_small_lshift( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_ansi_blocker_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small shift and small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_ansi_blocker_small_lshift_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ANSI with blocker and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_ansi_blocker_7u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small shift and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_ansi_blocker_7u_small_lshift( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_ansi_blocker_7u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} + +/* ANSI with blocker and small shift and small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_ansi_blocker_7u_small_lshift_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ISO + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ISO with small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ISO with 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso_1u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* ISO with small backspace and 1u keys in the bottom row + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso_1u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ISO with 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso_7u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ISO with small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_iso_7u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} +/* **************************************************************************************************************************************** */ +/* ISO with blocker + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_iso_blocker( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* ISO with blocker and small backspace + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------- -------------------' + */ + +#define LAYOUT_iso_blocker_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ +} + +/* **************************************************************************************************************************************** */ +/* ISO with blocker and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_iso_blocker_7u( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} + +/* ISO with blocker and small backspace and 7u spacebar + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |------------------------------------------------------------------------------------ |-----| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | + * `------' `--------------------------------------------------------------------------- ------------------' + */ + +#define LAYOUT_iso_blocker_7u_small_bspc( \ +K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ +K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ +K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ +K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ +K400, K401, K402, K403, K407, K410, K413, K414, K415 \ +) { \ +{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ +{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ +{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ +{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ +{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ +} diff --git a/keyboards/jacky_studio/s7_elephant/rev1/rules.mk b/keyboards/jacky_studio/s7_elephant/rev1/rules.mk new file mode 100644 index 00000000000..6a8c1054e7a --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev1/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality diff --git a/keyboards/jacky_studio/s7_elephant/rev2/config.h b/keyboards/jacky_studio/s7_elephant/rev2/config.h new file mode 100644 index 00000000000..d0ca4045c75 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/config.h @@ -0,0 +1,78 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID +#define PRODUCT_ID 0x0008 // 8 for S7++ +#define DEVICE_VER 0x0002 +#define MANUFACTURER Jacky +#define PRODUCT Jacky S7 Elephant Rev 2 + +/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + * + * 0 1 2 3 4 5 6 7 8 9 A B C D E F */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 } + +/* Setting the matrix value of top left key for bootmagic lite */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 15 + +#define DIODE_DIRECTION ROW2COL + +#define BACKLIGHT_PIN B6 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 15 + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 2 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#endif // RGB_DI_PIN + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/jacky_studio/s7_elephant/rev2/info.json b/keyboards/jacky_studio/s7_elephant/rev2/info.json new file mode 100644 index 00000000000..4db57aac829 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/info.json @@ -0,0 +1,165 @@ +{ + "keyboard_name": "S7 Elephant Rev2", + "url": "https://geekhack.org/index.php?topic=103148.0", + "maintainer": "qmk", + "width": 17.25, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"K0F (B0,E6)", "x":0, "y":0}, + {"label":"K00 (B0,D0)", "x":1.25, "y":0}, + {"label":"K01 (B0,D1)", "x":2.25, "y":0}, + {"label":"K02 (B0,D2)", "x":3.25, "y":0}, + {"label":"K03 (B0,D3)", "x":4.25, "y":0}, + {"label":"K04 (B0,D5)", "x":5.25, "y":0}, + {"label":"K05 (B0,D4)", "x":6.25, "y":0}, + {"label":"K06 (B0,D6)", "x":7.25, "y":0}, + {"label":"K07 (B0,D7)", "x":8.25, "y":0}, + {"label":"K08 (B0,B4)", "x":9.25, "y":0}, + {"label":"K09 (B0,F7)", "x":10.25, "y":0}, + {"label":"K0A (B0,F6)", "x":11.25, "y":0}, + {"label":"K0B (B0,F5)", "x":12.25, "y":0}, + {"label":"K0C (B0,F4)", "x":13.25, "y":0}, + {"label":"K0D (B0,F1)", "x":14.25, "y":0}, + {"label":"K0E (B0,F0)", "x":15.25, "y":0}, + {"label":"K4E (B7,F0)", "x":16.25, "y":0}, + {"label":"K1F (B1,E6)", "x":0, "y":1}, + {"label":"K10 (B1,D0)", "x":1.25, "y":1, "w":1.5}, + {"label":"K11 (B1,D1)", "x":2.75, "y":1}, + {"label":"K12 (B1,D2)", "x":3.75, "y":1}, + {"label":"K13 (B1,D3)", "x":4.75, "y":1}, + {"label":"K14 (B1,D5)", "x":5.75, "y":1}, + {"label":"K15 (B1,D4)", "x":6.75, "y":1}, + {"label":"K16 (B1,D6)", "x":7.75, "y":1}, + {"label":"K17 (B1,D7)", "x":8.75, "y":1}, + {"label":"K18 (B1,B4)", "x":9.75, "y":1}, + {"label":"K19 (B1,F7)", "x":10.75, "y":1}, + {"label":"K1A (B1,F6)", "x":11.75, "y":1}, + {"label":"K1B (B1,F5)", "x":12.75, "y":1}, + {"label":"K1C (B1,F4)", "x":13.75, "y":1}, + {"label":"K2C (B2,F4)", "x":14.75, "y":1, "w":1.5}, + {"label":"K1E (B1,F0)", "x":16.25, "y":1}, + {"label":"K2F (B2,E6)", "x":0, "y":2}, + {"label":"K20 (B2,D0)", "x":1.25, "y":2, "w":1.75}, + {"label":"K21 (B2,D1)", "x":3, "y":2}, + {"label":"K22 (B2,D2)", "x":4, "y":2}, + {"label":"K23 (B2,D3)", "x":5, "y":2}, + {"label":"K24 (B2,D5)", "x":6, "y":2}, + {"label":"K25 (B2,D4)", "x":7, "y":2}, + {"label":"K26 (B2,D6)", "x":8, "y":2}, + {"label":"K27 (B2,D7)", "x":9, "y":2}, + {"label":"K28 (B2,B4)", "x":10, "y":2}, + {"label":"K29 (B2,F7)", "x":11, "y":2}, + {"label":"K2A (B2,F6)", "x":12, "y":2}, + {"label":"K2B (B2,F5)", "x":13, "y":2}, + {"label":"K1D (B1,F1)", "x":14, "y":2, "w":2.25}, + {"label":"K2E (B2,F0)", "x":16.25, "y":2}, + {"label":"K3F (B3,E6)", "x":0, "y":3}, + {"label":"K30 (B3,D0)", "x":1.25, "y":3, "w":1.25}, + {"label":"K31 (B3,D1)", "x":2.5, "y":3}, + {"label":"K32 (B3,D2)", "x":3.5, "y":3}, + {"label":"K33 (B3,D3)", "x":4.5, "y":3}, + {"label":"K34 (B3,D5)", "x":5.5, "y":3}, + {"label":"K35 (B3,D4)", "x":6.5, "y":3}, + {"label":"K36 (B3,D6)", "x":7.5, "y":3}, + {"label":"K37 (B3,D7)", "x":8.5, "y":3}, + {"label":"K38 (B3,B4)", "x":9.5, "y":3}, + {"label":"K39 (B3,F7)", "x":10.5, "y":3}, + {"label":"K3A (B3,F6)", "x":11.5, "y":3}, + {"label":"K3B (B3,F5)", "x":12.5, "y":3}, + {"label":"K3C (B3,F4)", "x":13.5, "y":3, "w":1.75}, + {"label":"K3D (B3,F1)", "x":15.25, "y":3}, + {"label":"K3E (B3,F0)", "x":16.25, "y":3}, + {"label":"K4F (B7,E6)", "x":0, "y":4}, + {"label":"K40 (B7,D0)", "x":1.25, "y":4, "w":1.25}, + {"label":"K41 (B7,D1)", "x":2.5, "y":4, "w":1.25}, + {"label":"K42 (B7,D2)", "x":3.75, "y":4, "w":1.25}, + {"label":"K46 (B7,D6)", "x":5, "y":4, "w":6.25}, + {"label":"K48 (B7,B4)", "x":11.25, "y":4}, + {"label":"K49 (B7,F7)", "x":12.25, "y":4}, + {"label":"K4A (B7,F6)", "x":13.25, "y":4}, + {"label":"K4B (B7,F5)", "x":14.25, "y":4}, + {"label":"K4C (B7,F4)", "x":15.25, "y":4}, + {"label":"K4D (B7,F1)", "x":16.25, "y":4} + ] + }, + "LAYOUT_ansi_1u": { + "layout": [ + {"label":"K0F", "x":0, "y":0}, + {"label":"K00", "x":1.25, "y":0}, + {"label":"K01", "x":2.25, "y":0}, + {"label":"K02", "x":3.25, "y":0}, + {"label":"K03", "x":4.25, "y":0}, + {"label":"K04", "x":5.25, "y":0}, + {"label":"K05", "x":6.25, "y":0}, + {"label":"K06", "x":7.25, "y":0}, + {"label":"K07", "x":8.25, "y":0}, + {"label":"K08", "x":9.25, "y":0}, + {"label":"K09", "x":10.25, "y":0}, + {"label":"K0A", "x":11.25, "y":0}, + {"label":"K0B", "x":12.25, "y":0}, + {"label":"K0C", "x":13.25, "y":0}, + {"label":"K0E", "x":14.25, "y":0, "w":2}, + {"label":"K4E", "x":16.25, "y":0}, + {"label":"K1F", "x":0, "y":1}, + {"label":"K10", "x":1.25, "y":1, "w":1.5}, + {"label":"K11", "x":2.75, "y":1}, + {"label":"K12", "x":3.75, "y":1}, + {"label":"K13", "x":4.75, "y":1}, + {"label":"K14", "x":5.75, "y":1}, + {"label":"K15", "x":6.75, "y":1}, + {"label":"K16", "x":7.75, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K1A", "x":11.75, "y":1}, + {"label":"K1B", "x":12.75, "y":1}, + {"label":"K1C", "x":13.75, "y":1}, + {"label":"K2C", "x":14.75, "y":1, "w":1.5}, + {"label":"K1E", "x":16.25, "y":1}, + {"label":"K2F", "x":0, "y":2}, + {"label":"K20", "x":1.25, "y":2, "w":1.75}, + {"label":"K21", "x":3, "y":2}, + {"label":"K22", "x":4, "y":2}, + {"label":"K23", "x":5, "y":2}, + {"label":"K24", "x":6, "y":2}, + {"label":"K25", "x":7, "y":2}, + {"label":"K26", "x":8, "y":2}, + {"label":"K27", "x":9, "y":2}, + {"label":"K28", "x":10, "y":2}, + {"label":"K29", "x":11, "y":2}, + {"label":"K2A", "x":12, "y":2}, + {"label":"K2B", "x":13, "y":2}, + {"label":"K1D", "x":14, "y":2, "w":2.25}, + {"label":"K2E", "x":16.25, "y":2}, + {"label":"K3F", "x":0, "y":3}, + {"label":"K30", "x":1.25, "y":3, "w":2.25}, + {"label":"K32", "x":3.5, "y":3}, + {"label":"K33", "x":4.5, "y":3}, + {"label":"K34", "x":5.5, "y":3}, + {"label":"K35", "x":6.5, "y":3}, + {"label":"K36", "x":7.5, "y":3}, + {"label":"K37", "x":8.5, "y":3}, + {"label":"K38", "x":9.5, "y":3}, + {"label":"K39", "x":10.5, "y":3}, + {"label":"K3A", "x":11.5, "y":3}, + {"label":"K3B", "x":12.5, "y":3}, + {"label":"K3C", "x":13.5, "y":3, "w":1.75}, + {"label":"K3D", "x":15.25, "y":3}, + {"label":"K3E", "x":16.25, "y":3}, + {"label":"K4F", "x":0, "y":4}, + {"label":"K40", "x":1.25, "y":4, "w":1.25}, + {"label":"K41", "x":2.5, "y":4, "w":1.25}, + {"label":"K42", "x":3.75, "y":4, "w":1.25}, + {"label":"K46", "x":5, "y":4, "w":6.25}, + {"label":"K48", "x":11.25, "y":4}, + {"label":"K49", "x":12.25, "y":4}, + {"label":"K4A", "x":13.25, "y":4}, + {"label":"K4B", "x":14.25, "y":4}, + {"label":"K4C", "x":15.25, "y":4}, + {"label":"K4D", "x":16.25, "y":4} + ] + } + } +} diff --git a/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/keymap.c b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/keymap.c new file mode 100644 index 00000000000..5261691e020 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/keymap.c @@ -0,0 +1,81 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum custom_layers { + _QWERTY, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | + * |------| |-------------------------------------------------------------------------------------------------| + * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | + * |------| |-------------------------------------------------------------------------------------------------| + * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Home| + * |------| |-------------------------------------------------------------------------------------------------| + * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | + * |------| |-------------------------------------------------------------------------------------------------| + * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | + * `------' `-------------------------------------------------------------------------------------------------' + */ + + [_QWERTY] = LAYOUT_ansi_1u( + KC_F1, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + +/* FN + * ,------. ,-------------------------------------------------------------------------------------------------. + * |Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | |PgDn | + * |------| |-------------------------------------------------------------------------------------------------| + * |EEPRST| | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + + [_FN] = LAYOUT_ansi_1u( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, + EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +bool led_update_user(led_t led_state) { + // Turn LEDs On/Off for Caps Lock + if (led_state.caps_lock) { + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom(0, 0, 80); + } else { + rgblight_sethsv_noeeprom(0, 0, 80); + rgblight_disable_noeeprom(); + } + return false; +} diff --git a/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/readme.md b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/readme.md new file mode 100644 index 00000000000..c4fe30acdd5 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/default/readme.md @@ -0,0 +1,35 @@ +# Default keymap for S7 Elephant + +**Features** + +* LEDs are functioning as Caps-Lock indicators + +## QWERTY (Normal) Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | +|------| |-------------------------------------------------------------------------------------------------| +| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | +|------| |-------------------------------------------------------------------------------------------------| +| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | +|------| |-------------------------------------------------------------------------------------------------| +| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | +|------| |-------------------------------------------------------------------------------------------------| +| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | +`------' `-------------------------------------------------------------------------------------------------' +``` + +## FN Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | | | | +|------| |-------------------------------------------------------------------------------------------------| +| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | |PgDn | +|------| |-------------------------------------------------------------------------------------------------| +|EPRM | | | | | | | | | | | | +`------' `-------------------------------------------------------------------------------------------------' +``` diff --git a/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/keymap.c b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/keymap.c new file mode 100644 index 00000000000..1a0f84d8224 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/keymap.c @@ -0,0 +1,108 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// For readability +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Default layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F1 | | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | + * |------| |-------------------------------------------------------------------------------------------------| + * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | + * |------| |-------------------------------------------------------------------------------------------------| + * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter |Home | + * |------| |-------------------------------------------------------------------------------------------------| + * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | + * |------| |-------------------------------------------------------------------------------------------------| + * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_BASE] = LAYOUT_ansi_1u( + KC_F1, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Fn1 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F6 | | `~ | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | F7 | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | F8 | | |VolD |VolU |Mute | | | | | | | | | |PgUp | + * |------| |-------------------------------------------------------------------------------------------------| + * | F9 | | |Prev |Play |Next | | | | | | | | | |PgDn | + * |------| |-------------------------------------------------------------------------------------------------| + * | F10 | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN1] = LAYOUT_ansi_1u( + KC_F6, KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F8, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_F9, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_F10, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Fn2 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN2] = LAYOUT_ansi_1u( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Fn3 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN3] = LAYOUT_ansi_1u( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/readme.md b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/readme.md new file mode 100644 index 00000000000..c4fe30acdd5 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/readme.md @@ -0,0 +1,35 @@ +# Default keymap for S7 Elephant + +**Features** + +* LEDs are functioning as Caps-Lock indicators + +## QWERTY (Normal) Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | +|------| |-------------------------------------------------------------------------------------------------| +| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | +|------| |-------------------------------------------------------------------------------------------------| +| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | +|------| |-------------------------------------------------------------------------------------------------| +| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | +|------| |-------------------------------------------------------------------------------------------------| +| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | +`------' `-------------------------------------------------------------------------------------------------' +``` + +## FN Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | | | | +|------| |-------------------------------------------------------------------------------------------------| +| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | |PgDn | +|------| |-------------------------------------------------------------------------------------------------| +|EPRM | | | | | | | | | | | | +`------' `-------------------------------------------------------------------------------------------------' +``` diff --git a/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/rules.mk b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/rules.mk new file mode 100644 index 00000000000..1e5b99807cb --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/jacky_studio/s7_elephant/rev2/readme.md b/keyboards/jacky_studio/s7_elephant/rev2/readme.md new file mode 100644 index 00000000000..04cbafd96f5 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/readme.md @@ -0,0 +1,17 @@ +# S7 Elephant + +![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) + +A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant +* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) + +Make example for this keyboard (after setting up your build environment): + + make s7_elephant/rev2:default + +To enter the bootloader, either short the pins on the PCB next to CAPSLOCK or the press the RESET button on the FN layer. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jacky_studio/s7_elephant/rev2/rev2.c b/keyboards/jacky_studio/s7_elephant/rev2/rev2.c new file mode 100644 index 00000000000..1cc3fd53f05 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/rev2.c @@ -0,0 +1,17 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev2.h" diff --git a/keyboards/jacky_studio/s7_elephant/rev2/rev2.h b/keyboards/jacky_studio/s7_elephant/rev2/rev2.h new file mode 100644 index 00000000000..28decbc98a2 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/rev2.h @@ -0,0 +1,77 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* ALL: This is an odd layout that the JSON file comes preloaded with. Split left-shift and ansi enter + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_all( \ + K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ + K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ + K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ + K3F, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ +} + +/* ANSI + * ,---. ,---------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | + * `---' `---------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u( \ + K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \ + K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ + K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ + K3F, K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, ___, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ + { K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ +} diff --git a/keyboards/jacky_studio/s7_elephant/rev2/rules.mk b/keyboards/jacky_studio/s7_elephant/rev2/rules.mk new file mode 100644 index 00000000000..321f7fc6800 --- /dev/null +++ b/keyboards/jacky_studio/s7_elephant/rev2/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes From 4f2f21dc05c70451593ba83ed7a0956c771850c2 Mon Sep 17 00:00:00 2001 From: Aldehir Rojas Date: Tue, 29 Dec 2020 18:28:49 -0600 Subject: [PATCH 015/145] Rewrite APA102 support (#10894) * Rewrite APA102 support The APA102 source was broken by commit 16a15c1cfcbfd0feb2c2cf1383676747e2f97d73 as it did not include the quantum header. This commit addresses that, as well as other issues with transferring bytes over the SPI interface, i.e. it was not setting the clock pin back to low after sending a bit. The deviation when sending the end frame is kept, but updated to the latest from the referenced project. Finally, these changes expose the global LED brightness parameter of the APA102. Brightness values are configurable through `APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`. * Fix typo in led brightness extern * Move driver out of AVR directory and add delay for ARM * Experimental APA102 support on AVR and ARM Co-authored-by: Alde Rojas * Refactor apa102_send_byte() calls to a loop * Implement io_wait function for ARM * Move APA102 drivers to own directory, fix copyright notice * Add APA102 keymap to handwired/onekey * Simplify RGBLIGHT_ENABLE/DRIVER option handling Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com> --- common_features.mk | 46 +++++- docs/feature_rgb_matrix.md | 22 +++ docs/feature_rgblight.md | 11 +- drivers/apa102/apa102.c | 151 ++++++++++++++++++ drivers/{avr => apa102}/apa102.h | 32 ++-- drivers/avr/apa102.c | 96 ----------- keyboards/handwired/onekey/elite_c/config.h | 1 + .../handwired/onekey/keymaps/apa102/config.h | 5 + .../handwired/onekey/keymaps/apa102/keymap.c | 14 ++ .../handwired/onekey/keymaps/apa102/rules.mk | 2 + keyboards/handwired/onekey/promicro/config.h | 1 + keyboards/handwired/onekey/proton_c/config.h | 1 + 12 files changed, 259 insertions(+), 123 deletions(-) create mode 100644 drivers/apa102/apa102.c rename drivers/{avr => apa102}/apa102.h (55%) delete mode 100644 drivers/avr/apa102.c create mode 100644 keyboards/handwired/onekey/keymaps/apa102/config.h create mode 100644 keyboards/handwired/onekey/keymaps/apa102/keymap.c create mode 100644 keyboards/handwired/onekey/keymaps/apa102/rules.mk diff --git a/common_features.mk b/common_features.mk index 8ac53ec45a5..95b59937cdd 100644 --- a/common_features.mk +++ b/common_features.mk @@ -154,18 +154,38 @@ else endif endif +RGBLIGHT_ENABLE ?= no +VALID_RGBLIGHT_TYPES := WS2812 APA102 custom + +ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes) + RGBLIGHT_DRIVER ?= custom +endif + ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) - POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h - OPT_DEFS += -DRGBLIGHT_ENABLE - SRC += $(QUANTUM_DIR)/color.c - SRC += $(QUANTUM_DIR)/rgblight.c - CIE1931_CURVE := yes - RGB_KEYCODES_ENABLE := yes - ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes) - OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER + RGBLIGHT_DRIVER ?= WS2812 + + ifeq ($(filter $(RGBLIGHT_DRIVER),$(VALID_RGBLIGHT_TYPES)),) + $(error RGBLIGHT_DRIVER="$(RGBLIGHT_DRIVER)" is not a valid RGB type) else + POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h + OPT_DEFS += -DRGBLIGHT_ENABLE + SRC += $(QUANTUM_DIR)/color.c + SRC += $(QUANTUM_DIR)/rgblight.c + CIE1931_CURVE := yes + RGB_KEYCODES_ENABLE := yes + endif + + ifeq ($(strip $(RGBLIGHT_DRIVER)), WS2812) WS2812_DRIVER_REQUIRED := yes endif + + ifeq ($(strip $(RGBLIGHT_DRIVER)), APA102) + APA102_DRIVER_REQUIRED := yes + endif + + ifeq ($(strip $(RGBLIGHT_DRIVER)), custom) + OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER + endif endif @@ -243,6 +263,11 @@ endif WS2812_DRIVER_REQUIRED := yes endif + ifeq ($(strip $(RGB_MATRIX_DRIVER)), APA102) + OPT_DEFS += -DAPA102 + APA102_DRIVER_REQUIRED := yes + endif + ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes) OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB endif @@ -345,6 +370,11 @@ ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes) endif endif +ifeq ($(strip $(APA102_DRIVER_REQUIRED)), yes) + COMMON_VPATH += $(DRIVER_PATH)/apa102 + SRC += apa102.c +endif + ifeq ($(strip $(VISUALIZER_ENABLE)), yes) CIE1931_CURVE := yes endif diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index a9e711c9f23..bb0acba3bbc 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -129,6 +129,28 @@ Configure the hardware via your `config.h`: --- +### APA102 :id=apa102 + +There is basic support for APA102 based addressable LED strands. To enable it, add this to your `rules.mk`: + +```makefile +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = APA102 +``` + +Configure the hardware via your `config.h`: + +```c +// The pin connected to the data pin of the LEDs +#define RGB_DI_PIN D7 +// The pin connected to the clock pin of the LEDs +#define RGB_CI_PIN D6 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 70 +``` + +--- + From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example: ```c diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 762056b3432..f1178c679db 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -10,6 +10,7 @@ Currently QMK supports the following addressable LEDs (however, the white LED in * WS2811, WS2812, WS2812B, WS2812C, etc. * SK6812, SK6812MINI, SK6805 + * APA102 These LEDs are called "addressable" because instead of using a wire per color, each LED contains a small microchip that understands a special protocol sent over a single wire. The chip passes on the remaining data to the next LED, allowing them to be chained together. In this way, you can easily control the color of the individual LEDs. @@ -21,11 +22,19 @@ On keyboards with onboard RGB LEDs, it is usually enabled by default. If it is n RGBLIGHT_ENABLE = yes ``` -At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these. +For APA102 LEDs, add the following to your `rules.mk`: + +```make +RGBLIGHT_ENABLE = yes +RGBLIGHT_DRIVER = APA102 +``` + +At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. For APA102 LEDs, you must also define the clock pin. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these. |Define |Description | |---------------|---------------------------------------------------------------------------------------------------------| |`RGB_DI_PIN` |The pin connected to the data pin of the LEDs | +|`RGB_CI_PIN` |The pin connected to the clock pin of the LEDs (APA102 only) | |`RGBLED_NUM` |The number of LEDs connected | |`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` | diff --git a/drivers/apa102/apa102.c b/drivers/apa102/apa102.c new file mode 100644 index 00000000000..7396dc3c551 --- /dev/null +++ b/drivers/apa102/apa102.c @@ -0,0 +1,151 @@ +/* Copyright 2020 Aldehir Rojas + * Copyright 2017 Mikkel (Duckle29) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "apa102.h" +#include "quantum.h" + +#ifndef APA102_NOPS +# if defined(__AVR__) +# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed +# elif defined(PROTOCOL_CHIBIOS) + +# include "hal.h" +# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) +# define APA102_NOPS (100 / (1000000000L / (STM32_SYSCLK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns +# else +# error("APA102_NOPS configuration required") +# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot +# endif +# endif +#endif + +#define io_wait \ + do { \ + for (int i = 0; i < APA102_NOPS; i++) { \ + __asm__ volatile("nop\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t"); \ + } \ + } while (0) + +#define APA102_SEND_BIT(byte, bit) \ + do { \ + writePin(RGB_DI_PIN, (byte >> bit) & 1); \ + io_wait; \ + writePinHigh(RGB_CI_PIN); \ + io_wait; \ + writePinLow(RGB_CI_PIN); \ + io_wait; \ + } while (0) + +uint8_t apa102_led_brightness = APA102_DEFAULT_BRIGHTNESS; + +void static apa102_start_frame(void); +void static apa102_end_frame(uint16_t num_leds); + +void static apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t brightness); +void static apa102_send_byte(uint8_t byte); + +void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) { + LED_TYPE *end = start_led + num_leds; + + apa102_start_frame(); + for (LED_TYPE *led = start_led; led < end; led++) { + apa102_send_frame(led->r, led->g, led->b, apa102_led_brightness); + } + apa102_end_frame(num_leds); +} + +// Overwrite the default rgblight_call_driver to use apa102 driver +void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); } + +void static apa102_init(void) { + setPinOutput(RGB_DI_PIN); + setPinOutput(RGB_CI_PIN); + + writePinLow(RGB_DI_PIN); + writePinLow(RGB_CI_PIN); +} + +void apa102_set_brightness(uint8_t brightness) { + if (brightness > APA102_MAX_BRIGHTNESS) { + apa102_led_brightness = APA102_MAX_BRIGHTNESS; + } else if (brightness < 0) { + apa102_led_brightness = 0; + } else { + apa102_led_brightness = brightness; + } +} + +void static apa102_send_frame(uint8_t red, uint8_t green, uint8_t blue, uint8_t brightness) { + apa102_send_byte(0b11100000 | brightness); + apa102_send_byte(blue); + apa102_send_byte(green); + apa102_send_byte(red); +} + +void static apa102_start_frame(void) { + apa102_init(); + for (uint16_t i = 0; i < 4; i++) { + apa102_send_byte(0); + } +} + +void static apa102_end_frame(uint16_t num_leds) { + // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h + // and adapted. The code is MIT licensed. I think thats compatible? + // + // The data stream seen by the last LED in the chain will be delayed by + // (count - 1) clock edges, because each LED before it inverts the clock + // line and delays the data by one clock edge. Therefore, to make sure + // the last LED actually receives the data we wrote, the number of extra + // edges we send at the end of the frame must be at least (count - 1). + // + // Assuming we only want to send these edges in groups of size K, the + // C/C++ expression for the minimum number of groups to send is: + // + // ((count - 1) + (K - 1)) / K + // + // The C/C++ expression above is just (count - 1) divided by K, + // rounded up to the nearest whole number if there is a remainder. + // + // We set K to 16 and use the formula above as the number of frame-end + // bytes to transfer. Each byte has 16 clock edges. + // + // We are ignoring the specification for the end frame in the APA102 + // datasheet, which says to send 0xFF four times, because it does not work + // when you have 66 LEDs or more, and also it results in unwanted white + // pixels if you try to update fewer LEDs than are on your LED strip. + uint16_t iterations = (num_leds + 14) / 16; + for (uint16_t i = 0; i < iterations; i++) { + apa102_send_byte(0); + } + + apa102_init(); +} + +void static apa102_send_byte(uint8_t byte) { + APA102_SEND_BIT(byte, 7); + APA102_SEND_BIT(byte, 6); + APA102_SEND_BIT(byte, 5); + APA102_SEND_BIT(byte, 4); + APA102_SEND_BIT(byte, 3); + APA102_SEND_BIT(byte, 2); + APA102_SEND_BIT(byte, 1); + APA102_SEND_BIT(byte, 0); +} diff --git a/drivers/avr/apa102.h b/drivers/apa102/apa102.h similarity index 55% rename from drivers/avr/apa102.h rename to drivers/apa102/apa102.h index d4c1e18ee1b..58cf020c1e1 100644 --- a/drivers/avr/apa102.h +++ b/drivers/apa102/apa102.h @@ -1,10 +1,5 @@ -/* - * light weight WS2812 lib include - * - * Version 2.3 - Nev 29th 2015 - * Author: Tim (cpldcpu@gmail.com) - * - * Please do not change this file! All configuration is handled in "ws2812_config.h" +/* Copyright 2020 Aldehir Rojas + * Copyright 2017 Mikkel (Duckle29) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,24 +17,25 @@ #pragma once -#include -#include - #include "color.h" +#ifndef APA102_DEFAULT_BRIGHTNESS +# define APA102_DEFAULT_BRIGHTNESS 31 +#endif + +#define APA102_MAX_BRIGHTNESS 31 + +extern uint8_t apa102_led_brightness; + /* User Interface * * Input: - * ledarray: An array of GRB data describing the LED colors - * number_of_leds: The number of LEDs to write - * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0) + * start_led: An array of GRB data describing the LED colors + * num_leds: The number of LEDs to write * * The functions will perform the following actions: * - Set the data-out pin as output * - Send out the LED data - * - Wait 50�s to reset the LEDs */ - -void apa102_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); -void apa102_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask); -void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); +void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds); +void apa102_set_brightness(uint8_t brightness); diff --git a/drivers/avr/apa102.c b/drivers/avr/apa102.c deleted file mode 100644 index 740acb5739b..00000000000 --- a/drivers/avr/apa102.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * APA102 lib V1.0a - * - * Controls APA102 RGB-LEDs - * Author: Mikkel (Duckle29 on GitHub) - * - * Dec 22th, 2017 v1.0a Initial Version - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "apa102.h" -#include -#include -#include -#include "debug.h" - -// Setleds for standard RGB -void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds) { apa102_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); } - -void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK) { - setPinOutput(RGB_DI_PIN); - setPinOutput(RGB_CLK_PIN); - - apa102_send_array((uint8_t *)ledarray, leds) -} - -void apa102_send_array(uint8_t *data, uint16_t leds) { // Data is struct of 3 bytes. RGB - leds is number of leds in data - apa102_start_frame(); - while (leds--) { - apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r); - data++; - } - apa102_end_frame(leds); -} - -void apa102_send_frame(uint32_t frame) { - for (uint32_t i = 0xFF; i > 0;) { - apa102_send_byte(frame & i); - i = i << 8; - } -} - -void apa102_start_frame() { apa102_send_frame(0); } - -void apa102_end_frame(uint16_t leds) { - // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h - // and adapted. The code is MIT licensed. I think thats compatible? - - // We need to send some more bytes to ensure that all the LEDs in the - // chain see their new color and start displaying it. - // - // The data stream seen by the last LED in the chain will be delayed by - // (count - 1) clock edges, because each LED before it inverts the clock - // line and delays the data by one clock edge. Therefore, to make sure - // the last LED actually receives the data we wrote, the number of extra - // edges we send at the end of the frame must be at least (count - 1). - // For the APA102C, that is sufficient. - // - // The SK9822 only updates after it sees 32 zero bits followed by one more - // rising edge. To avoid having the update time depend on the color of - // the last LED, we send a dummy 0xFF byte. (Unfortunately, this means - // that partial updates of the beginning of an LED strip are not possible; - // the LED after the last one you are trying to update will be black.) - // After that, to ensure that the last LED in the chain sees 32 zero bits - // and a rising edge, we need to send at least 65 + (count - 1) edges. It - // is sufficent and simpler to just send (5 + count/16) bytes of zeros. - // - // We are ignoring the specification for the end frame in the APA102/SK9822 - // datasheets because it does not actually ensure that all the LEDs will - // start displaying their new colors right away. - - apa102_send_byte(0xFF); - for (uint16_t i = 0; i < 5 + leds / 16; i++) { - apa102_send_byte(0); - } -} - -void apa102_send_byte(uint8_t byte) { - uint8_t i; - for (i = 0; i < 8; i++) { - writePin(RGB_DI_PIN, !!(byte & (1 << (7 - i)))); - writePinHigh(RGB_CLK_PIN); - } -} diff --git a/keyboards/handwired/onekey/elite_c/config.h b/keyboards/handwired/onekey/elite_c/config.h index 167373cd39b..02c81ce7439 100644 --- a/keyboards/handwired/onekey/elite_c/config.h +++ b/keyboards/handwired/onekey/elite_c/config.h @@ -25,5 +25,6 @@ #define BACKLIGHT_PIN B6 #define RGB_DI_PIN F6 +#define RGB_CI_PIN B1 #define ADC_PIN F6 diff --git a/keyboards/handwired/onekey/keymaps/apa102/config.h b/keyboards/handwired/onekey/keymaps/apa102/config.h new file mode 100644 index 00000000000..aeb22a261ba --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/apa102/config.h @@ -0,0 +1,5 @@ +#pragma once + +#define RGBLED_NUM 40 +#define APA102_DEFAULT_BRIGHTNESS 5 +#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/handwired/onekey/keymaps/apa102/keymap.c b/keyboards/handwired/onekey/keymaps/apa102/keymap.c new file mode 100644 index 00000000000..700755a452b --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/apa102/keymap.c @@ -0,0 +1,14 @@ +#include QMK_KEYBOARD_H +#include "apa102.h" // Only needed if you want to use the global brightness function + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_1x1(RGB_MOD) +}; + +void keyboard_post_init_user(void) { + apa102_set_brightness(5); + + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom_cyan(); + rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_SWIRL); +} diff --git a/keyboards/handwired/onekey/keymaps/apa102/rules.mk b/keyboards/handwired/onekey/keymaps/apa102/rules.mk new file mode 100644 index 00000000000..70932cb7516 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/apa102/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +RGBLIGHT_DRIVER = APA102 diff --git a/keyboards/handwired/onekey/promicro/config.h b/keyboards/handwired/onekey/promicro/config.h index 167373cd39b..02c81ce7439 100644 --- a/keyboards/handwired/onekey/promicro/config.h +++ b/keyboards/handwired/onekey/promicro/config.h @@ -25,5 +25,6 @@ #define BACKLIGHT_PIN B6 #define RGB_DI_PIN F6 +#define RGB_CI_PIN B1 #define ADC_PIN F6 diff --git a/keyboards/handwired/onekey/proton_c/config.h b/keyboards/handwired/onekey/proton_c/config.h index 3ba4ba64996..a364bbee341 100644 --- a/keyboards/handwired/onekey/proton_c/config.h +++ b/keyboards/handwired/onekey/proton_c/config.h @@ -28,5 +28,6 @@ #define BACKLIGHT_PAL_MODE 2 #define RGB_DI_PIN A0 +#define RGB_CI_PIN B13 #define ADC_PIN A0 From 1b3504e3292db2074b83944c32b67a7c88bb4f51 Mon Sep 17 00:00:00 2001 From: siggie0815 Date: Wed, 30 Dec 2020 04:18:16 +0100 Subject: [PATCH 016/145] Update ADB impelemtation in TMK Core (#11168) * Update ADB impelmentation in tmk_core to recent version. Pcked from tmk_keyboard repository revision: 48d696443857512d45f9a7329e0dd0a76345860f * Restore convenient ADB functions used in QMK port. * Do cformat. --- tmk_core/protocol/adb.c | 256 +++++++++++++++++++++++++++------------- tmk_core/protocol/adb.h | 58 ++++++++- 2 files changed, 229 insertions(+), 85 deletions(-) diff --git a/tmk_core/protocol/adb.c b/tmk_core/protocol/adb.c index a23c919619a..367f1b09fa1 100644 --- a/tmk_core/protocol/adb.c +++ b/tmk_core/protocol/adb.c @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO +Copyright 2011-19 Jun WAKO Copyright 2013 Shay Green This software is licensed with a Modified BSD License. @@ -41,6 +41,7 @@ POSSIBILITY OF SUCH DAMAGE. #include #include #include "adb.h" +#include "print.h" // GCC doesn't inline functions normally #define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT)) @@ -59,7 +60,6 @@ static inline void place_bit1(void); static inline void send_byte(uint8_t data); static inline uint16_t wait_data_lo(uint16_t us); static inline uint16_t wait_data_hi(uint16_t us); -static inline uint16_t adb_host_dev_recv(uint8_t device); void adb_host_init(void) { ADB_PORT &= ~(1 << ADB_DATA_BIT); @@ -81,119 +81,164 @@ bool adb_host_psw(void) { return psw_in(); } * * */ - -// ADB Bit Cells -// -// bit cell time: 70-130us -// low part of bit0: 60-70% of bit cell -// low part of bit1: 30-40% of bit cell -// -// bit cell time 70us 130us -// -------------------------------------------- -// low part of bit0 42-49 78-91 -// high part of bit0 21-28 39-52 -// low part of bit1 21-28 39-52 -// high part of bit1 42-49 78-91 -// -// -// bit0: -// 70us bit cell: -// ____________~~~~~~ -// 42-49 21-28 -// -// 130us bit cell: -// ____________~~~~~~ -// 78-91 39-52 -// -// bit1: -// 70us bit cell: -// ______~~~~~~~~~~~~ -// 21-28 42-49 -// -// 130us bit cell: -// ______~~~~~~~~~~~~ -// 39-52 78-91 -// -// [from Apple IIgs Hardware Reference Second Edition] - -enum { ADDR_KEYB = 0x20, ADDR_MOUSE = 0x30 }; - -uint16_t adb_host_kbd_recv(void) { return adb_host_dev_recv(ADDR_KEYB); } +uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); } #ifdef ADB_MOUSE_ENABLE -void adb_mouse_init(void) { return; } +__attribute__((weak)) void adb_mouse_init(void) { return; } -uint16_t adb_host_mouse_recv(void) { return adb_host_dev_recv(ADDR_MOUSE); } +__attribute__((weak)) void adb_mouse_task(void) { return; } + +uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); } #endif -static inline uint16_t adb_host_dev_recv(uint8_t device) { - uint16_t data = 0; +// This sends Talk command to read data from register and returns length of the data. +uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) { + for (int8_t i = 0; i < len; i++) buf[i] = 0; + cli(); attention(); - send_byte(device | 0x0C); // Addr:Keyboard(0010)/Mouse(0011), Cmd:Talk(11), Register0(00) - place_bit0(); // Stopbit(0) + send_byte((addr << 4) | ADB_CMD_TALK | reg); + place_bit0(); // Stopbit(0) + // TODO: Service Request(Srq): + // Device holds low part of comannd stopbit for 140-260us + // + // Command: + // ......._ ______________________ ___ ............_ ------- + // | | | | | | | + // Command | | | | | Data bytes | | + // ........|___| | 140-260 |__| |_............|___| + // |stop0 | Tlt Stop-to-Start |start1| |stop0 | + // + // Command without data: + // ......._ __________________________ + // | | + // Command | | + // ........|___| | 140-260 | + // |stop0 | Tlt Stop-to-Start | + // + // Service Request: + // ......._ ______ ___ ............_ ------- + // | 140-260 | | | | | | + // Command | Service Request | | | | Data bytes | | + // ........|___________________| |__| |_............|___| + // |stop0 | |start1| |stop0 | + // ......._ __________ + // | 140-260 | + // Command | Service Request | + // ........|___________________| + // |stop0 | + // This can be happened? + // ......._ ______________________ ___ ............_ ----- + // | | | | | | 140-260 | + // Command | | | | | Data bytes | Service Request | + // ........|___| | 140-260 |__| |_............|_________________| + // |stop0 | Tlt Stop-to-Start |start1| |stop0 | + // + // "Service requests are issued by the devices during a very specific time at the + // end of the reception of the command packet. + // If a device in need of service issues a service request, it must do so within + // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs." + // + // "A device sends a Service Request signal by holding the bus low during the low + // portion of the stop bit of any command or data transaction. The device must lengthen + // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15." + // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf if (!wait_data_hi(500)) { // Service Request(310us Adjustable Keyboard): just ignored + xprintf("R"); sei(); - return -30; // something wrong + return 0; } if (!wait_data_lo(500)) { // Tlt/Stop to Start(140-260us) sei(); - return 0; // No data to send + return 0; // No data from device(not error); } - uint8_t n = 17; // start bit + 16 data bits + // start bit(1) + if (!wait_data_hi(40)) { + xprintf("S"); + sei(); + return 0; + } + if (!wait_data_lo(100)) { + xprintf("s"); + sei(); + return 0; + } + + uint8_t n = 0; // bit count do { + // + // |<- bit_cell_max(130) ->| + // | |<- lo ->| + // | | |<-hi->| + // _______ + // | | | + // | 130-lo | lo-hi | + // |________| | + // uint8_t lo = (uint8_t)wait_data_hi(130); - if (!lo) goto error; + if (!lo) goto error; // no more bit or after stop bit uint8_t hi = (uint8_t)wait_data_lo(lo); - if (!hi) goto error; + if (!hi) goto error; // stop bit extedned by Srq? - hi = lo - hi; - lo = 130 - lo; + if (n / 8 >= len) continue; // can't store in buf - data <<= 1; - if (lo < hi) { - data |= 1; - } else if (n == 17) { - sei(); - return -20; + buf[n / 8] <<= 1; + if ((130 - lo) < (lo - hi)) { + buf[n / 8] |= 1; } - } while (--n); - - // Stop bit can't be checked normally since it could have service request lenghtening - // and its high state never goes low. - if (!wait_data_hi(351) || wait_data_lo(91)) { - sei(); - return -21; - } - sei(); - return data; + } while (++n); error: sei(); - return -n; + return n / 8; } -void adb_host_listen(uint8_t cmd, uint8_t data_h, uint8_t data_l) { +uint16_t adb_host_talk(uint8_t addr, uint8_t reg) { + uint8_t len; + uint8_t buf[8]; + len = adb_host_talk_buf(addr, reg, buf, 8); + if (len != 2) return 0; + return (buf[0] << 8 | buf[1]); +} + +void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) { cli(); attention(); - send_byte(cmd); - place_bit0(); // Stopbit(0) + send_byte((addr << 4) | ADB_CMD_LISTEN | reg); + place_bit0(); // Stopbit(0) + // TODO: Service Request _delay_us(200); // Tlt/Stop to Start place_bit1(); // Startbit(1) - send_byte(data_h); - send_byte(data_l); + for (int8_t i = 0; i < len; i++) { + send_byte(buf[i]); + // xprintf("%02X ", buf[i]); + } place_bit0(); // Stopbit(0); sei(); } +void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) { + uint8_t buf[2] = {data_h, data_l}; + adb_host_listen_buf(addr, reg, buf, 2); +} + +void adb_host_flush(uint8_t addr) { + cli(); + attention(); + send_byte((addr << 4) | ADB_CMD_FLUSH); + place_bit0(); // Stopbit(0) + _delay_us(200); // Tlt/Stop to Start + sei(); +} + // send state of LEDs void adb_host_kbd_led(uint8_t led) { - // Addr:Keyboard(0010), Cmd:Listen(10), Register2(10) - // send upper byte (not used) - // send lower byte (bit2: ScrollLock, bit1: CapsLock, bit0: - adb_host_listen(0x2A, 0, led & 0x07); + // Listen Register2 + // upper byte: not used + // lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock + adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07); } #ifdef ADB_PSW_BIT @@ -327,7 +372,7 @@ Commands bits commands ------------------------------------------------------ - - - - - 0 0 0 0 Send Request(reset all devices) + - - - - 0 0 0 0 Send Reset(reset all devices) A A A A 0 0 0 1 Flush(reset a device) - - - - 0 0 1 0 Reserved - - - - 0 0 1 1 Reserved @@ -435,5 +480,56 @@ Keyboard LEDs & state of keys(Register2) | +----------------------------- Delete +------------------------------- Reserved +Address, Handler ID and bits(Register3) + 1514131211 . . 8 7 . . . . . . 0 + | | | | | | | | | | | | | | | | + | | | | | | | | +-+-+-+-+-+-+-+- Handler ID + | | | | +-+-+-+----------------- Address + | | | +------------------------- 0 + | | +--------------------------- Service request enable(1 = enabled) + | +----------------------------- Exceptional event(alwyas 1 if not used) + +------------------------------- 0 + +ADB Bit Cells + bit cell time: 70-130us + low part of bit0: 60-70% of bit cell + low part of bit1: 30-40% of bit cell + + bit cell time 70us 130us + -------------------------------------------- + low part of bit0 42-49 78-91 + high part of bit0 21-28 39-52 + low part of bit1 21-28 39-52 + high part of bit1 42-49 78-91 + + + bit0: + 70us bit cell: + ____________~~~~~~ + 42-49 21-28 + + 130us bit cell: + ____________~~~~~~ + 78-91 39-52 + + bit1: + 70us bit cell: + ______~~~~~~~~~~~~ + 21-28 42-49 + + 130us bit cell: + ______~~~~~~~~~~~~ + 39-52 78-91 + + [from Apple IIgs Hardware Reference Second Edition] + +Keyboard Handle ID + Apple Standard Keyboard M0116: 0x01 + Apple Extended Keyboard M0115: 0x02 + Apple Extended Keyboard II M3501: 0x02 + Apple Adjustable Keybaord: 0x10 + + http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802 + END_OF_ADB */ diff --git a/tmk_core/protocol/adb.h b/tmk_core/protocol/adb.h index 34cbcf76910..fe8becc2d59 100644 --- a/tmk_core/protocol/adb.h +++ b/tmk_core/protocol/adb.h @@ -1,5 +1,5 @@ /* -Copyright 2011 Jun WAKO +Copyright 2011-19 Jun WAKO This software is licensed with a Modified BSD License. All of this is supposed to be Free Software, Open Source, DFSG-free, @@ -47,12 +47,60 @@ POSSIBILITY OF SUCH DAMAGE. #define ADB_POWER 0x7F #define ADB_CAPS 0x39 +/* ADB commands */ +// Default Address +#define ADB_ADDR_0 0 +#define ADB_ADDR_DONGLE 1 +#define ADB_ADDR_KEYBOARD 2 +#define ADB_ADDR_MOUSE 3 +#define ADB_ADDR_TABLET 4 +#define ADB_ADDR_APPLIANCE 7 +#define ADB_ADDR_8 8 +#define ADB_ADDR_9 9 +#define ADB_ADDR_10 10 +#define ADB_ADDR_11 11 +#define ADB_ADDR_12 12 +#define ADB_ADDR_13 13 +#define ADB_ADDR_14 14 +#define ADB_ADDR_15 15 +// for temporary purpose, do not use for polling +#define ADB_ADDR_TMP 15 +#define ADB_ADDR_MOUSE_POLL 10 +// Command Type +#define ADB_CMD_RESET 0 +#define ADB_CMD_FLUSH 1 +#define ADB_CMD_LISTEN 8 +#define ADB_CMD_TALK 12 +// Register +#define ADB_REG_0 0 +#define ADB_REG_1 1 +#define ADB_REG_2 2 +#define ADB_REG_3 3 + +/* ADB keyboard handler id */ +#define ADB_HANDLER_STD 0x01 /* IIGS, M0116 */ +#define ADB_HANDLER_AEK 0x02 /* M0115, M3501 */ +#define ADB_HANDLER_AEK_RMOD 0x03 /* M0115, M3501, alternate mode enableing right modifiers */ +#define ADB_HANDLER_STD_ISO 0x04 /* M0118, ISO swapping keys */ +#define ADB_HANDLER_AEK_ISO 0x05 /* M0115, M3501, ISO swapping keys */ +#define ADB_HANDLER_M1242_ANSI 0x10 /* Adjustable keyboard */ +#define ADB_HANDLER_CLASSIC1_MOUSE 0x01 +#define ADB_HANDLER_CLASSIC2_MOUSE 0x02 +#define ADB_HANDLER_EXTENDED_MOUSE 0x04 +#define ADB_HANDLER_TURBO_MOUSE 0x32 + // ADB host void adb_host_init(void); bool adb_host_psw(void); +uint16_t adb_host_talk(uint8_t addr, uint8_t reg); +uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len); +void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l); +void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len); +void adb_host_flush(uint8_t addr); +void adb_host_kbd_led(uint8_t led); uint16_t adb_host_kbd_recv(void); uint16_t adb_host_mouse_recv(void); -void adb_host_listen(uint8_t cmd, uint8_t data_h, uint8_t data_l); -void adb_host_kbd_led(uint8_t led); -void adb_mouse_task(void); -void adb_mouse_init(void); + +// ADB Mouse +void adb_mouse_task(void); +void adb_mouse_init(void); From 47b9b110097a864d6ab76516b2213afd59948527 Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 30 Dec 2020 10:27:37 -0800 Subject: [PATCH 017/145] Configure keyboard matrix from info.json (#10817) * Make parameters from info.json available to the build system * move all clueboard settings to info.json * code formatting * make flake8 happy * make flake8 happy * make qmk lint happy * Add support for specifying led indicators in json * move led indicators to the clueboard info.json * Apply suggestions from code review Co-authored-by: Erovia * add missing docstring Co-authored-by: Erovia --- Makefile | 4 +- build_keyboard.mk | 33 +- docs/reference_info_json.md | 149 +- keyboards/clueboard/17/17.h | 33 - keyboards/clueboard/17/config.h | 69 - keyboards/clueboard/17/info.json | 79 +- .../clueboard/17/keymaps/default/readme.md | 1 + keyboards/clueboard/17/rules.mk | 10 - keyboards/clueboard/2x1800/2018/2018.h | 74 - keyboards/clueboard/2x1800/2018/config.h | 172 +- keyboards/clueboard/2x1800/2018/info.json | 444 +++- keyboards/clueboard/2x1800/2018/rules.mk | 12 - keyboards/clueboard/2x1800/2019/2019.h | 221 -- keyboards/clueboard/2x1800/2019/config.h | 168 +- keyboards/clueboard/2x1800/2019/info.json | 2368 +++++++++-------- .../2x1800/2019/keymaps/default/keymap.json | 2 +- keyboards/clueboard/2x1800/2019/rules.mk | 13 - keyboards/clueboard/2x1800/info.json | 5 +- keyboards/clueboard/60/60.h | 87 - keyboards/clueboard/60/config.h | 98 - keyboards/clueboard/60/info.json | 403 ++- keyboards/clueboard/60/rules.mk | 13 - keyboards/clueboard/66/info.json | 34 +- keyboards/clueboard/66/rev1/config.h | 59 - keyboards/clueboard/66/rev1/info.json | 273 ++ keyboards/clueboard/66/rev1/readme.md | 15 + keyboards/clueboard/66/rev1/rev1.h | 72 - keyboards/clueboard/66/rev1/rules.mk | 18 - keyboards/clueboard/66/rev2/config.h | 56 - keyboards/clueboard/66/rev2/info.json | 273 ++ keyboards/clueboard/66/rev2/readme.md | 15 + keyboards/clueboard/66/rev2/rev2.h | 90 - keyboards/clueboard/66/rev2/rules.mk | 14 - keyboards/clueboard/66/rev3/config.h | 58 - keyboards/clueboard/66/rev3/info.json | 273 ++ keyboards/clueboard/66/rev3/readme.md | 15 + keyboards/clueboard/66/rev3/rev3.h | 90 - keyboards/clueboard/66/rev3/rules.mk | 14 - keyboards/clueboard/66/rev4/config.h | 54 - keyboards/clueboard/66/rev4/info.json | 270 ++ keyboards/clueboard/66/rev4/keymaps/keymap.c | 13 + .../clueboard/66/rev4/keymaps/mine/keymap.c | 13 + keyboards/clueboard/66/rev4/mine/keymap.c | 13 + keyboards/clueboard/66/rev4/rev4.h | 91 - keyboards/clueboard/66/rev4/rules.mk | 19 - keyboards/clueboard/66_hotswap/config.h | 23 - keyboards/clueboard/66_hotswap/gen1/config.h | 25 - keyboards/clueboard/66_hotswap/gen1/gen1.h | 71 - keyboards/clueboard/66_hotswap/gen1/info.json | 337 +-- keyboards/clueboard/66_hotswap/gen1/readme.md | 16 + keyboards/clueboard/66_hotswap/gen1/rules.mk | 20 +- .../clueboard/66_hotswap/prototype/config.h | 30 - .../clueboard/66_hotswap/prototype/info.json | 437 ++- .../66_hotswap/prototype/prototype.h | 83 - .../clueboard/66_hotswap/prototype/readme.md | 16 + .../clueboard/66_hotswap/prototype/rules.mk | 13 - keyboards/clueboard/california/california.h | 18 - keyboards/clueboard/california/config.h | 21 - keyboards/clueboard/california/info.json | 24 +- .../california/keymaps/default/readme.md | 1 + keyboards/clueboard/card/card.h | 16 - keyboards/clueboard/card/config.h | 129 - keyboards/clueboard/card/info.json | 62 +- keyboards/clueboard/card/rules.mk | 14 - keyboards/clueboard/info.json | 6 +- lib/python/qmk/cli/c2json.py | 3 +- lib/python/qmk/cli/chibios/confmigrate.py | 8 +- lib/python/qmk/cli/generate/__init__.py | 4 + lib/python/qmk/cli/generate/api.py | 14 +- lib/python/qmk/cli/generate/config_h.py | 277 ++ lib/python/qmk/cli/generate/info_json.py | 49 + lib/python/qmk/cli/generate/layouts.py | 93 + lib/python/qmk/cli/generate/rules_mk.py | 59 + lib/python/qmk/cli/info.py | 7 +- lib/python/qmk/cli/kle2json.py | 51 +- lib/python/qmk/constants.py | 11 + lib/python/qmk/info.py | 355 ++- lib/python/qmk/info_json_encoder.py | 96 + message.mk | 3 +- 79 files changed, 4791 insertions(+), 3901 deletions(-) create mode 100644 keyboards/clueboard/17/keymaps/default/readme.md create mode 100644 keyboards/clueboard/66/rev1/info.json create mode 100644 keyboards/clueboard/66/rev1/readme.md create mode 100644 keyboards/clueboard/66/rev2/info.json create mode 100644 keyboards/clueboard/66/rev2/readme.md create mode 100644 keyboards/clueboard/66/rev3/info.json create mode 100644 keyboards/clueboard/66/rev3/readme.md create mode 100644 keyboards/clueboard/66/rev4/info.json create mode 100644 keyboards/clueboard/66/rev4/keymaps/keymap.c create mode 100644 keyboards/clueboard/66/rev4/keymaps/mine/keymap.c create mode 100644 keyboards/clueboard/66/rev4/mine/keymap.c create mode 100644 keyboards/clueboard/66_hotswap/gen1/readme.md create mode 100644 keyboards/clueboard/66_hotswap/prototype/readme.md create mode 100644 keyboards/clueboard/california/keymaps/default/readme.md create mode 100755 lib/python/qmk/cli/generate/config_h.py create mode 100755 lib/python/qmk/cli/generate/info_json.py create mode 100755 lib/python/qmk/cli/generate/layouts.py create mode 100755 lib/python/qmk/cli/generate/rules_mk.py create mode 100755 lib/python/qmk/info_json_encoder.py diff --git a/Makefile b/Makefile index e4f7b5b5165..91ab9e4e8ea 100644 --- a/Makefile +++ b/Makefile @@ -501,8 +501,8 @@ endef %: # Check if we have the CMP tool installed cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi; - # Ensure that bin/qmk works. This will be a failing check after the next develop merge - if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi + # Ensure that bin/qmk works. + if ! bin/qmk hello 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; exit 1; fi # Check if the submodules are dirty, and display a warning if they are ifndef SKIP_GIT if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi diff --git a/build_keyboard.mk b/build_keyboard.mk index 8d018f2e3c6..816681bd0ab 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -90,13 +90,16 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","") include $(KEYBOARD_PATH_1)/rules.mk endif - MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP) MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP) MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP) MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP) MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP) +# Pull in rules from info.json +INFO_RULES_MK = $(shell bin/qmk generate-rules-mk --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/rules.mk) +include $(INFO_RULES_MK) + # Check for keymap.json first, so we can regenerate keymap.c include build_json.mk @@ -290,6 +293,32 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") CONFIG_H += $(KEYMAP_PATH)/config.h endif +# Pull in stuff from info.json +INFO_JSON_FILES := +ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","") + INFO_JSON_FILES += $(KEYBOARD_PATH_1)/info.json +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","") + INFO_JSON_FILES += $(KEYBOARD_PATH_2)/info.json +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","") + INFO_JSON_FILES += $(KEYBOARD_PATH_3)/info.json +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","") + INFO_JSON_FILES += $(KEYBOARD_PATH_4)/info.json +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","") + INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json +endif + +CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h + +$(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) + bin/qmk generate-config-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_config.h + +$(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES) + bin/qmk generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h + # project specific files SRC += $(KEYBOARD_SRC) \ $(KEYMAP_C) \ @@ -364,7 +393,7 @@ all: echo "skipped" >&2 endif -build: elf cpfirmware +build: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h elf cpfirmware check-size: build objs-size: build diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index 3ca62c719e7..47506bc92dc 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -19,8 +19,20 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai * Width of the board in Key Units * `height` * Height of the board in Key Units +* `debounce` + * How many milliseconds (ms) to wait for debounce to happen. (Default: 5) +* `diode_direction` + * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details. +* `layout_aliases` + * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to. * `layouts` - * Physical Layout representations. See the next section for more detail. + * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail. +* `matrix_pins` + * Configure the pins corresponding to columns and rows, or direct pins. See [Matrix Pins](#matrix_pins) for more detail. +* `rgblight` + * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail. +* `usb` + * Configure USB VID, PID, and other parameters. See [USB](#USB) for more detail. ### Layout Format @@ -49,25 +61,128 @@ All key positions and rotations are specified in relation to the top-left corner * The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1` * `h` * The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1` -* `r` - * How many degrees clockwise to rotate the key. -* `rx` - * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x` -* `ry` - * The absolute position of the point to rotate the key around in the vertical axis. Default: `y` -* `ks` - * Key Shape: define a polygon by providing a list of points, in Key Units. - * **Important**: These are relative to the top-left of the key, not absolute. - * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]` * `label` * What to name this position in the matrix. - * This should usually be the same name as what is silkscreened on the PCB at this location. + * This should usually correspond to the keycode for the first layer of the default keymap. +* `matrix` + * A 2 item list describing the row and column location for this key. -## How is the Metadata Exposed? +### Matrix Pins -This metadata is primarily used in two ways: +Currently QMK supports connecting switches either directly to GPIO pins or via a switch matrix. At this time you can not combine these, they are mutually exclusive. -* To allow web-based configurators to dynamically generate UI -* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter. +#### Switch Matrix -Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API. +Most keyboards use a switch matrix to connect keyswitches to the MCU. You can define your pin columns and rows to configure your switch matrix. When defining switch matrices you should also define your `diode_direction`. + +Example: + +```json +{ + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["F4", "E6", "B1", "D2"], + "rows": ["B0", "D3", "D5", "D4", "D6"] + } +} +``` + +#### Direct Pins + +Direct pins are when you connect one side of the switch to GND and the other side to a GPIO pin on your MCU. No diode is required, but there is a 1:1 mapping between switches and pins. + +When specifying direct pins you need to arrange them in nested arrays. The outer array consists of rows, while the inner array is a text string corresponding to a pin. You can use `null` to indicate an empty spot in the matrix. + +Example: + +```json +{ + "matrix_pins": { + "direct": [ + ["A10", "A9"], + ["A0", "B8"], + [null, "B11"], + ["B9", "A8"], + ["A7", "B1"], + [null, "B2"] + ] +} +``` + +### RGB Lighting + +This section controls the legacy WS2812 support in QMK. This should not be confused with the RGB Matrix feature, which can be used to control both WS2812 and ISSI RGB LEDs. + +The following items can be set. Not every value is required. + +* `led_count` + * The number of LEDs in your strip +* `pin` + * The GPIO pin that your LED strip is connected to +* `animations` + * A dictionary that lists enabled and disabled animations. See [RGB Light Animations](#rgb_light_animations) below. +* `sleep` + * Set to `true` to enable lighting during host sleep +* `split` + * Set to `true` to enable synchronization functionality between split halves +* `split_count` + * For split keyboards, the number of LEDs on each side +* `max_brightness` + * (0-255) What the maxmimum brightness (value) level is +* `hue_steps` + * How many steps of adjustment to have for hue +* `saturation_steps` + * How many steps of adjustment to have for saturation +* `brightness_steps` + * How many steps of adjustment to have for brightness (value) + +Example: + +```json +{ + "rgblight": { + "led_count": 4, + "pin": "F6", + "hue_steps": 10, + "saturation_steps": 17, + "brightness_steps": 17, + "animations": { + "all": true + } + } +} +``` + +#### RGB Light Animations + +The following animations can be enabled: + +| Key | Description | +|-----|-------------| +| `all` | Enable all additional animation modes. | +| `alternating` | Enable alternating animation mode. | +| `breathing` | Enable breathing animation mode. | +| `christmas` | Enable christmas animation mode. | +| `knight` | Enable knight animation mode. | +| `rainbow_mood` | Enable rainbow mood animation mode. | +| `rainbow_swirl` | Enable rainbow swirl animation mode. | +| `rgb_test` | Enable RGB test animation mode. | +| `snake` | Enable snake animation mode. | +| `static_gradient` | Enable static gradient mode. | +| `twinkle` | Enable twinkle animation mode. | + +### USB + +Every USB keyboard needs to have its USB parmaters defined. At a minimum you need to set vid, pid, and device version. + +Example: + +```json +{ + "usb": { + "vid": "0xC1ED", + "pid": "0x23B0", + "device_ver": "0x0001" + } +} +``` diff --git a/keyboards/clueboard/17/17.h b/keyboards/clueboard/17/17.h index af3be4f5a98..ebf2083862f 100644 --- a/keyboards/clueboard/17/17.h +++ b/keyboards/clueboard/17/17.h @@ -3,37 +3,4 @@ #include "quantum.h" - -/* Cluepad matrix layout - * .-------------------. - * |NLCK| /| *| -| - * |-------------------| - * | 7| 8| 9| | - * |--------------| | - * | 4| 5| 6| +| - * |-------------------| - * | 1| 2| 3| | - * |--------------| | - * | 0| .| Ent| - * '-------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_numpad_5x4( \ - k00, k01, k02, k03, \ - k10, k11, k12, \ - k20, k21, k22, k13, \ - k30, k31, k32, \ - k40, k42, k33 \ -) { \ - { k00, k01, k02, k03 }, \ - { k10, k11, k12, k13 }, \ - { k20, k21, k22, KC_NO }, \ - { k30, k31, k32, k33 }, \ - { k40, KC_NO, k42, KC_NO } \ -} - -#define LAYOUT LAYOUT_numpad_5x4 -#define KEYMAP LAYOUT_numpad_5x4 - #endif diff --git a/keyboards/clueboard/17/config.h b/keyboards/clueboard/17/config.h index b7e28cbb9f3..877f4786908 100644 --- a/keyboards/clueboard/17/config.h +++ b/keyboards/clueboard/17/config.h @@ -20,76 +20,7 @@ along with this program. If not, see . #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2312 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Cluepad with RGB Underlighting -#define DESCRIPTION QMK keyboard firmware for Cluepad - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 4 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 -* pin: -*/ -#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 } -/* Column pin configuration - * col: 0 1 2 3 - * pin: F4 E6 B1 D2 - */ -#define MATRIX_COL_PINS { F4, E6, B1, D2 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Number of backlighting levels */ #define BACKLIGHT_LEVELS 3 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Underlight configuration - */ -#define RGB_DI_PIN F6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* Debug forcibly enabled */ -#define ALWAYS_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - #endif diff --git a/keyboards/clueboard/17/info.json b/keyboards/clueboard/17/info.json index 12338ae1d34..46510c48c0c 100644 --- a/keyboards/clueboard/17/info.json +++ b/keyboards/clueboard/17/info.json @@ -1,30 +1,67 @@ { + "manufacturer": "Clueboard", "keyboard_name": "Clueboard 17% (Cluepad)", - "keyboard_folder": "clueboard/17", - "url": "", - "maintainer": "qmk", - "width": 4, + "maintainer": "skullydazed", "height": 5, + "width": 4, + "diode_direction": "COL2ROW", + "features": { + "backlight": true, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "matrix_pins": { + "cols": ["F4", "E6", "B1", "D2"], + "rows": ["B0", "D3", "D5", "D4", "D6"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "10", + "led_count": "4", + "pin": "F6", + "saturation_steps": "17" + }, + "url": "", + "usb": { + "device_ver": "0x0001", + "pid": "0x2312", + "vid": "0xC1ED" + }, + "layout_aliases": { + "KEYMAP": "LAYOUT_numpad_5x4", + "LAYOUT": "LAYOUT_numpad_5x4" + }, "layouts": { "LAYOUT_numpad_5x4": { + "key_count": 17, "layout": [ - {"label":"Num Lock", "x":0, "y":0}, - {"label":"/", "x":1, "y":0}, - {"label":"*", "x":2, "y":0}, - {"label":"-", "x":3, "y":0}, - {"label":"7", "x":0, "y":1}, - {"label":"8", "x":1, "y":1}, - {"label":"9", "x":2, "y":1}, - {"label":"4", "x":0, "y":2}, - {"label":"5", "x":1, "y":2}, - {"label":"6", "x":2, "y":2}, - {"label":"+", "x":3, "y":1, "h":2}, - {"label":"1", "x":0, "y":3}, - {"label":"2", "x":1, "y":3}, - {"label":"3", "x":2, "y":3}, - {"label":"0", "x":0, "y":4, "w":2}, - {"label":".", "x":2, "y":4}, - {"label":"Enter", "x":3, "y":3, "h":2} + { "label": "Num Lock", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "/", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "*", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "-", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "7", "matrix": [1, 0], "w": 1, "x": 0, "y": 1 }, + { "label": "8", "matrix": [1, 1], "w": 1, "x": 1, "y": 1 }, + { "label": "9", "matrix": [1, 2], "w": 1, "x": 2, "y": 1 }, + { "label": "4", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 }, + { "label": "5", "matrix": [2, 1], "w": 1, "x": 1, "y": 2 }, + { "label": "6", "matrix": [2, 2], "w": 1, "x": 2, "y": 2 }, + { "h": 2, "label": "+", "matrix": [1, 3], "w": 1, "x": 3, "y": 1 }, + { "label": "1", "matrix": [3, 0], "w": 1, "x": 0, "y": 3 }, + { "label": "2", "matrix": [3, 1], "w": 1, "x": 1, "y": 3 }, + { "label": "3", "matrix": [3, 2], "w": 1, "x": 2, "y": 3 }, + { "label": "0", "matrix": [4, 0], "w": 2, "x": 0, "y": 4 }, + { "label": ".", "matrix": [4, 2], "w": 1, "x": 2, "y": 4 }, + { "h": 2, "label": "Enter", "matrix": [3, 3], "w": 1, "x": 3, "y": 3 } ] } } diff --git a/keyboards/clueboard/17/keymaps/default/readme.md b/keyboards/clueboard/17/keymaps/default/readme.md new file mode 100644 index 00000000000..4fc9092b390 --- /dev/null +++ b/keyboards/clueboard/17/keymaps/default/readme.md @@ -0,0 +1 @@ +Default keymap for the Clueboard 17. diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk index 703bf3d2db4..75fb718e33d 100644 --- a/keyboards/clueboard/17/rules.mk +++ b/keyboards/clueboard/17/rules.mk @@ -12,14 +12,4 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/clueboard/2x1800/2018/2018.h b/keyboards/clueboard/2x1800/2018/2018.h index 818ceed80df..c6e152ad441 100644 --- a/keyboards/clueboard/2x1800/2018/2018.h +++ b/keyboards/clueboard/2x1800/2018/2018.h @@ -18,78 +18,4 @@ #include "quantum.h" -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT_4u_space( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, kb0, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT_7u_space( \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, kb0, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) \ -{ \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, KC_NO, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \ -} - -#define LAYOUT LAYOUT_all - #endif diff --git a/keyboards/clueboard/2x1800/2018/config.h b/keyboards/clueboard/2x1800/2018/config.h index 0c57b43248b..40486379eab 100644 --- a/keyboards/clueboard/2x1800/2018/config.h +++ b/keyboards/clueboard/2x1800/2018/config.h @@ -15,185 +15,17 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x23A0 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT 2x1800 2018 -#define DESCRIPTION What does it mean? - -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { C0, C1, C2, C3, C7, F7, B1, F2, F3, F4, F5, F6 } -#define MATRIX_COL_PINS { D2, D3, D4, D5, D7, E0, E1, B0, E6, B3, B2 } -#define UNUSED_PINS { D0, D1, D6, C5, C6, E4, E5, E7, F0, F1, A0, A1, A2, A3, A4, A5, A6, A7 } - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* audio support */ #define B7_AUDIO #define C4_AUDIO #define AUDIO_CLICKY -#define LED_NUM_LOCK_PIN B4 -#define LED_CAPS_LOCK_PIN B5 -#define LED_SCROLL_LOCK_PIN B6 - -/* number of backlight levels */ -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE + /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN C6 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/clueboard/2x1800/2018/info.json b/keyboards/clueboard/2x1800/2018/info.json index 0e3bb36a9d8..b671174076b 100644 --- a/keyboards/clueboard/2x1800/2018/info.json +++ b/keyboards/clueboard/2x1800/2018/info.json @@ -1,41 +1,435 @@ { - "keyboard_name": "Clueboard 2x1800", - "url": "", + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 2x1800 2018", "maintainer": "skullydazed", - "width": 24, "height": 6.5, + "width": 24, + "debounce": "5", + "diode_direction": "ROW2COL", + "features": { + "audio": true, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "indicators": { + "num_lock": "B4", + "caps_lock": "B5", + "scroll_lock": "B6" + }, + "matrix_pins": { + "cols": ["D2", " D3", " D4", " D5", " D7", " E0", " E1", " B0", " E6", " B3", " B2"], + "rows": ["C0", " C1", " C2", " C3", " C7", " F7", " B1", " F2", " F3", " F4", " F5", " F6"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "8", + "hue_steps": "8", + "led_count": "16", + "pin": "C6", + "saturation_steps": "8" + }, + "usb": { + "pid": "0x23A0" + }, + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { - "key_count": 127, + "LAYOUT_4u_space": { + "key_count": 124, "layout": [ - {"label":"Home", "x":0, "y":0}, {"label":"End", "x":1, "y":0}, {"label":"PgUp", "x":2, "y":0}, {"label":"PgDn", "x":3, "y":0}, {"label":"Esc", "x":4.75, "y":0}, {"label":"F1", "x":6.25, "y":0}, {"label":"F2", "x":7.25, "y":0}, {"label":"F3", "x":8.25, "y":0}, {"label":"F4", "x":9.25, "y":0}, {"label":"F5", "x":10.75, "y":0}, {"label":"F6", "x":11.75, "y":0}, {"label":"F7", "x":12.75, "y":0}, {"label":"F8", "x":13.75, "y":0}, {"label":"F9", "x":15.25, "y":0}, {"label":"F10", "x":16.25, "y":0}, {"label":"F11", "x":17.25, "y":0}, {"label":"F12", "x":18.25, "y":0}, {"label":"PrtSc", "x":20, "y":0}, {"label":"Scroll Lock", "x":21, "y":0}, {"label":"Pause", "x":22, "y":0}, {"label":"Insert", "x":23, "y":0}, - {"label":"-", "x":0, "y":1.25}, {"label":"Num Lock", "x":1, "y":1.25}, {"label":"/", "x":2, "y":1.25}, {"label":"*", "x":3, "y":1.25}, {"label":"~", "x":4.5, "y":1.25}, {"label":"!", "x":5.5, "y":1.25}, {"label":"@", "x":6.5, "y":1.25}, {"label":"#", "x":7.5, "y":1.25}, {"label":"$", "x":8.5, "y":1.25}, {"label":"%", "x":9.5, "y":1.25}, {"label":"^", "x":10.5, "y":1.25}, {"label":"&", "x":11.5, "y":1.25}, {"label":"*", "x":12.5, "y":1.25}, {"label":"(", "x":13.5, "y":1.25}, {"label":")", "x":14.5, "y":1.25}, {"label":"_", "x":15.5, "y":1.25}, {"label":"+", "x":16.5, "y":1.25}, {"label":"Backspace", "x":17.5, "y":1.25, "w":2}, {"label":"Num Lock", "x":20, "y":1.25}, {"label":"/", "x":21, "y":1.25}, {"label":"*", "x":22, "y":1.25}, {"label":"-", "x":23, "y":1.25}, - {"label":"+", "x":0, "y":2.25, "h":2}, {"label":"7", "x":1, "y":2.25}, {"label":"8", "x":2, "y":2.25}, {"label":"9", "x":3, "y":2.25}, {"label":"Tab", "x":4.5, "y":2.25, "w":1.5}, {"label":"Q", "x":6, "y":2.25}, {"label":"W", "x":7, "y":2.25}, {"label":"E", "x":8, "y":2.25}, {"label":"R", "x":9, "y":2.25}, {"label":"T", "x":10, "y":2.25}, {"label":"Y", "x":11, "y":2.25}, {"label":"U", "x":12, "y":2.25}, {"label":"I", "x":13, "y":2.25}, {"label":"O", "x":14, "y":2.25}, {"label":"P", "x":15, "y":2.25}, {"label":"{", "x":16, "y":2.25}, {"label":"}", "x":17, "y":2.25}, {"label":"|", "x":18, "y":2.25, "w":1.5}, {"label":"7", "x":20, "y":2.25}, {"label":"8", "x":21, "y":2.25}, {"label":"9", "x":22, "y":2.25}, {"label":"+", "x":23, "y":2.25, "h":2}, - {"label":"4", "x":1, "y":3.25}, {"label":"5", "x":2, "y":3.25}, {"label":"6", "x":3, "y":3.25}, {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75}, {"label":"A", "x":6.25, "y":3.25}, {"label":"S", "x":7.25, "y":3.25}, {"label":"D", "x":8.25, "y":3.25}, {"label":"F", "x":9.25, "y":3.25}, {"label":"G", "x":10.25, "y":3.25}, {"label":"H", "x":11.25, "y":3.25}, {"label":"J", "x":12.25, "y":3.25}, {"label":"K", "x":13.25, "y":3.25}, {"label":"L", "x":14.25, "y":3.25}, {"label":":", "x":15.25, "y":3.25}, {"label":"\"", "x":16.25, "y":3.25}, {"label":"Enter", "x":17.25, "y":3.25, "w":2.25}, {"label":"4", "x":20, "y":3.25}, {"label":"5", "x":21, "y":3.25}, {"label":"6", "x":22, "y":3.25}, - {"label":"Enter", "x":0, "y":4.25, "h":2}, {"label":"1", "x":1, "y":4.25}, {"label":"2", "x":2, "y":4.25}, {"label":"3", "x":3, "y":4.25}, {"label":"\\u2191", "x":4.25, "y":4.5}, {"label":"Shift", "x":5.5, "y":4.25, "w":1.25}, {"label":"Z", "x":6.75, "y":4.25}, {"label":"X", "x":7.75, "y":4.25}, {"label":"C", "x":8.75, "y":4.25}, {"label":"V", "x":9.75, "y":4.25}, {"label":"B", "x":10.75, "y":4.25}, {"label":"N", "x":11.75, "y":4.25}, {"label":"M", "x":12.75, "y":4.25}, {"label":"<", "x":13.75, "y":4.25}, {"label":">", "x":14.75, "y":4.25}, {"label":"?", "x":15.75, "y":4.25}, {"label":"Shift", "x":16.75, "y":4.25, "w":1.75}, {"label":"\\u2191", "x":18.75, "y":4.5}, {"label":"1", "x":20, "y":4.25}, {"label":"2", "x":21, "y":4.25}, {"label":"3", "x":22, "y":4.25}, {"label":"Enter", "x":23, "y":4.25, "h":2}, - {"label":"0", "x":1, "y":5.25}, {"label":".", "x":2, "y":5.25}, {"label":"\\u2190", "x":3.25, "y":5.5}, {"label":"\\u2193", "x":4.25, "y":5.5}, {"label":"\\u2192", "x":5.25, "y":5.5}, {"label":"Ctrl", "x":6.5, "y":5.25}, {"label":"Win", "x":7.5, "y":5.25}, {"label":"Alt", "x":8.5, "y":5.25}, {"label":"1u", "x":9.5, "y":5.25}, {"label":"1u", "x":10.5, "y":5.25}, {"label":"1u", "x":11.5, "y":5.25}, {"label":"1u", "x":12.5, "y":5.25}, {"label":"Alt", "x":13.5, "y":5.25}, {"label":"Win", "x":14.5, "y":5.25}, {"label":"Menu", "x":15.5, "y":5.25}, {"label":"Ctrl", "x":16.5, "y":5.25}, {"label":"\\u2190", "x":17.75, "y":5.5}, {"label":"\\u2193", "x":18.75, "y":5.5}, {"label":"\\u2192", "x":19.75, "y":5.5}, {"label":"0", "x":21, "y":5.25}, {"label":".", "x":22, "y":5.25} + { "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 0 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 0 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 0 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 0 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 0 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 0 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 0 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 0 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 0 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 0 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 0 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 0 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 0 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 0 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 0 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 0 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 0 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 1.25 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 1.25 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 1.25 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 1.25 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1.25 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1.25 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1.25 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1.25 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1.25 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1.25 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1.25 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 1.25 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 1.25 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 1.25 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 1.25 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 1.25 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 1.25 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 1.25 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 1.25 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 1.25 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 1.25 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 1.25 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 2.25 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 2.25 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 2.25 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 2.25 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 2.25 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 2.25 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 2.25 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 2.25 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 2.25 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 2.25 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 2.25 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 2.25 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 2.25 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 2.25 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 2.25 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 2.25 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 2.25 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 2.25 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 2.25 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 2.25 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 2.25 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 2.25 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 3.25 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 3.25 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 3.25 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 3.25 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3.25 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3.25 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3.25 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3.25 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3.25 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3.25 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 3.25 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 3.25 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 3.25 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 3.25 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 3.25 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 3.25 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 3.25 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 3.25 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 3.25 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 4.25 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 4.25 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 4.25 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 4.25 }, + { "matrix": [4, 4], "w": 1.25, "x": 5.5, "y": 4.25 }, + { "matrix": [4, 5], "w": 1, "x": 6.75, "y": 4.25 }, + { "matrix": [4, 6], "w": 1, "x": 7.75, "y": 4.25 }, + { "matrix": [4, 7], "w": 1, "x": 8.75, "y": 4.25 }, + { "matrix": [4, 8], "w": 1, "x": 9.75, "y": 4.25 }, + { "matrix": [4, 9], "w": 1, "x": 10.75, "y": 4.25 }, + { "matrix": [4, 10], "w": 1, "x": 11.75, "y": 4.25 }, + { "matrix": [10, 0], "w": 1, "x": 12.75, "y": 4.25 }, + { "matrix": [10, 1], "w": 1, "x": 13.75, "y": 4.25 }, + { "matrix": [10, 2], "w": 1, "x": 14.75, "y": 4.25 }, + { "matrix": [10, 3], "w": 1, "x": 15.75, "y": 4.25 }, + { "matrix": [10, 4], "w": 1.75, "x": 16.75, "y": 4.25 }, + { "matrix": [10, 5], "w": 1, "x": 20, "y": 4.25 }, + { "matrix": [9, 6], "w": 1, "x": 21, "y": 4.25 }, + { "matrix": [10, 7], "w": 1, "x": 22, "y": 4.25 }, + { "h": 2, "matrix": [10, 8], "w": 1, "x": 23, "y": 4.25 }, + { "matrix": [10, 9], "w": 1, "x": 4.25, "y": 4.5 }, + { "matrix": [10, 10], "w": 1, "x": 18.75, "y": 4.5 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 5.25 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 5.25 }, + { "matrix": [5, 3], "w": 1, "x": 6.5, "y": 5.25 }, + { "matrix": [5, 4], "w": 1, "x": 7.5, "y": 5.25 }, + { "matrix": [5, 5], "w": 1, "x": 8.5, "y": 5.25 }, + { "matrix": [5, 6], "w": 4, "x": 9.5, "y": 5.25 }, + { "matrix": [5, 7], "w": 1, "x": 13.5, "y": 5.25 }, + { "matrix": [5, 8], "w": 1, "x": 14.5, "y": 5.25 }, + { "matrix": [11, 0], "w": 1, "x": 15.5, "y": 5.25 }, + { "matrix": [11, 2], "w": 1, "x": 16.5, "y": 5.25 }, + { "matrix": [11, 3], "w": 1, "x": 21, "y": 5.25 }, + { "matrix": [11, 4], "w": 1, "x": 22, "y": 5.25 }, + { "matrix": [11, 5], "w": 1, "x": 3.25, "y": 5.5 }, + { "matrix": [10, 6], "w": 1, "x": 4.25, "y": 5.5 }, + { "matrix": [11, 6], "w": 1, "x": 5.25, "y": 5.5 }, + { "matrix": [11, 7], "w": 1, "x": 17.75, "y": 5.5 }, + { "matrix": [11, 8], "w": 1, "x": 18.75, "y": 5.5 }, + { "matrix": [11, 9], "w": 1, "x": 19.75, "y": 5.5 } ] }, "LAYOUT_7u_space": { "key_count": 121, "layout": [ - {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0}, - {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25}, - {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2}, - {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25}, - {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5}, - {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"kb0", "x":8.5, "y":5.25, "w":7}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5} + { "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 0 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 0 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 0 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 0 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 0 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 0 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 0 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 0 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 0 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 0 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 0 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 0 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 0 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 0 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 0 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 0 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 0 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 1.25 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 1.25 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 1.25 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 1.25 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1.25 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1.25 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1.25 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1.25 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1.25 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1.25 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1.25 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 1.25 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 1.25 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 1.25 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 1.25 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 1.25 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 1.25 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 1.25 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 1.25 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 1.25 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 1.25 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 1.25 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 2.25 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 2.25 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 2.25 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 2.25 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 2.25 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 2.25 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 2.25 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 2.25 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 2.25 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 2.25 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 2.25 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 2.25 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 2.25 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 2.25 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 2.25 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 2.25 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 2.25 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 2.25 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 2.25 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 2.25 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 2.25 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 2.25 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 3.25 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 3.25 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 3.25 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 3.25 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3.25 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3.25 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3.25 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3.25 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3.25 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3.25 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 3.25 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 3.25 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 3.25 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 3.25 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 3.25 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 3.25 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 3.25 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 3.25 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 3.25 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 4.25 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 4.25 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 4.25 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 4.25 }, + { "matrix": [4, 4], "w": 1.25, "x": 5.5, "y": 4.25 }, + { "matrix": [4, 5], "w": 1, "x": 6.75, "y": 4.25 }, + { "matrix": [4, 6], "w": 1, "x": 7.75, "y": 4.25 }, + { "matrix": [4, 7], "w": 1, "x": 8.75, "y": 4.25 }, + { "matrix": [4, 8], "w": 1, "x": 9.75, "y": 4.25 }, + { "matrix": [4, 9], "w": 1, "x": 10.75, "y": 4.25 }, + { "matrix": [4, 10], "w": 1, "x": 11.75, "y": 4.25 }, + { "matrix": [10, 0], "w": 1, "x": 12.75, "y": 4.25 }, + { "matrix": [10, 1], "w": 1, "x": 13.75, "y": 4.25 }, + { "matrix": [10, 2], "w": 1, "x": 14.75, "y": 4.25 }, + { "matrix": [10, 3], "w": 1, "x": 15.75, "y": 4.25 }, + { "matrix": [10, 4], "w": 1.75, "x": 16.75, "y": 4.25 }, + { "matrix": [10, 5], "w": 1, "x": 20, "y": 4.25 }, + { "matrix": [9, 6], "w": 1, "x": 21, "y": 4.25 }, + { "matrix": [10, 7], "w": 1, "x": 22, "y": 4.25 }, + { "h": 2, "matrix": [10, 8], "w": 1, "x": 23, "y": 4.25 }, + { "matrix": [10, 9], "w": 1, "x": 4.25, "y": 4.5 }, + { "matrix": [10, 10], "w": 1, "x": 18.75, "y": 4.5 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 5.25 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 5.25 }, + { "matrix": [5, 3], "w": 1, "x": 6.5, "y": 5.25 }, + { "matrix": [5, 4], "w": 1, "x": 7.5, "y": 5.25 }, + { "matrix": [5, 5], "w": 7, "x": 8.5, "y": 5.25 }, + { "matrix": [5, 6], "w": 1, "x": 15.5, "y": 5.25 }, + { "matrix": [5, 7], "w": 1, "x": 16.5, "y": 5.25 }, + { "matrix": [11, 0], "w": 1, "x": 21, "y": 5.25 }, + { "matrix": [11, 4], "w": 1, "x": 22, "y": 5.25 }, + { "matrix": [11, 5], "w": 1, "x": 3.25, "y": 5.5 }, + { "matrix": [10, 6], "w": 1, "x": 4.25, "y": 5.5 }, + { "matrix": [11, 6], "w": 1, "x": 5.25, "y": 5.5 }, + { "matrix": [11, 7], "w": 1, "x": 17.75, "y": 5.5 }, + { "matrix": [11, 8], "w": 1, "x": 18.75, "y": 5.5 }, + { "matrix": [11, 9], "w": 1, "x": 19.75, "y": 5.5 } ] }, - "LAYOUT_4u_space": { - "key_count": 124, + "LAYOUT_all": { + "key_count": 127, "layout": [ - {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0}, - {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25}, - {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2}, - {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25}, - {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5}, - {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"k58", "x":8.5, "y":5.25}, {"label":"kb0", "x":9.5, "y":5.25, "w":4}, {"label":"kb2", "x":13.5, "y":5.25}, {"label":"kb3", "x":14.5, "y":5.25}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5} + { "label": "Home", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "End", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "PgUp", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "PgDn", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "Esc", "matrix": [0, 4], "w": 1, "x": 4.75, "y": 0 }, + { "label": "F1", "matrix": [0, 6], "w": 1, "x": 6.25, "y": 0 }, + { "label": "F2", "matrix": [0, 7], "w": 1, "x": 7.25, "y": 0 }, + { "label": "F3", "matrix": [0, 8], "w": 1, "x": 8.25, "y": 0 }, + { "label": "F4", "matrix": [0, 9], "w": 1, "x": 9.25, "y": 0 }, + { "label": "F5", "matrix": [0, 10], "w": 1, "x": 10.75, "y": 0 }, + { "label": "F6", "matrix": [6, 0], "w": 1, "x": 11.75, "y": 0 }, + { "label": "F7", "matrix": [6, 1], "w": 1, "x": 12.75, "y": 0 }, + { "label": "F8", "matrix": [6, 2], "w": 1, "x": 13.75, "y": 0 }, + { "label": "F9", "matrix": [6, 3], "w": 1, "x": 15.25, "y": 0 }, + { "label": "F10", "matrix": [6, 4], "w": 1, "x": 16.25, "y": 0 }, + { "label": "F11", "matrix": [6, 5], "w": 1, "x": 17.25, "y": 0 }, + { "label": "F12", "matrix": [6, 6], "w": 1, "x": 18.25, "y": 0 }, + { "label": "PrtSc", "matrix": [6, 7], "w": 1, "x": 20, "y": 0 }, + { "label": "Scroll Lock", "matrix": [6, 8], "w": 1, "x": 21, "y": 0 }, + { "label": "Pause", "matrix": [6, 9], "w": 1, "x": 22, "y": 0 }, + { "label": "Insert", "matrix": [6, 10], "w": 1, "x": 23, "y": 0 }, + { "label": "-", "matrix": [1, 0], "w": 1, "x": 0, "y": 1.25 }, + { "label": "Num Lock", "matrix": [1, 1], "w": 1, "x": 1, "y": 1.25 }, + { "label": "/", "matrix": [1, 2], "w": 1, "x": 2, "y": 1.25 }, + { "label": "*", "matrix": [1, 3], "w": 1, "x": 3, "y": 1.25 }, + { "label": "~", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1.25 }, + { "label": "!", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1.25 }, + { "label": "@", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1.25 }, + { "label": "#", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1.25 }, + { "label": "$", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1.25 }, + { "label": "%", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1.25 }, + { "label": "^", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1.25 }, + { "label": "&", "matrix": [7, 0], "w": 1, "x": 11.5, "y": 1.25 }, + { "label": "*", "matrix": [7, 1], "w": 1, "x": 12.5, "y": 1.25 }, + { "label": "(", "matrix": [7, 2], "w": 1, "x": 13.5, "y": 1.25 }, + { "label": ")", "matrix": [7, 3], "w": 1, "x": 14.5, "y": 1.25 }, + { "label": "_", "matrix": [7, 4], "w": 1, "x": 15.5, "y": 1.25 }, + { "label": "+", "matrix": [7, 5], "w": 1, "x": 16.5, "y": 1.25 }, + { "label": "Backspace", "matrix": [7, 6], "w": 2, "x": 17.5, "y": 1.25 }, + { "label": "Num Lock", "matrix": [7, 7], "w": 1, "x": 20, "y": 1.25 }, + { "label": "/", "matrix": [7, 8], "w": 1, "x": 21, "y": 1.25 }, + { "label": "*", "matrix": [7, 9], "w": 1, "x": 22, "y": 1.25 }, + { "label": "-", "matrix": [7, 10], "w": 1, "x": 23, "y": 1.25 }, + { "h": 2, "label": "+", "matrix": [2, 0], "w": 1, "x": 0, "y": 2.25 }, + { "label": "7", "matrix": [2, 1], "w": 1, "x": 1, "y": 2.25 }, + { "label": "8", "matrix": [2, 2], "w": 1, "x": 2, "y": 2.25 }, + { "label": "9", "matrix": [2, 3], "w": 1, "x": 3, "y": 2.25 }, + { "label": "Tab", "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 2.25 }, + { "label": "Q", "matrix": [2, 5], "w": 1, "x": 6, "y": 2.25 }, + { "label": "W", "matrix": [2, 6], "w": 1, "x": 7, "y": 2.25 }, + { "label": "E", "matrix": [2, 7], "w": 1, "x": 8, "y": 2.25 }, + { "label": "R", "matrix": [2, 8], "w": 1, "x": 9, "y": 2.25 }, + { "label": "T", "matrix": [2, 9], "w": 1, "x": 10, "y": 2.25 }, + { "label": "Y", "matrix": [2, 10], "w": 1, "x": 11, "y": 2.25 }, + { "label": "U", "matrix": [8, 0], "w": 1, "x": 12, "y": 2.25 }, + { "label": "I", "matrix": [8, 1], "w": 1, "x": 13, "y": 2.25 }, + { "label": "O", "matrix": [8, 2], "w": 1, "x": 14, "y": 2.25 }, + { "label": "P", "matrix": [8, 3], "w": 1, "x": 15, "y": 2.25 }, + { "label": "{", "matrix": [8, 4], "w": 1, "x": 16, "y": 2.25 }, + { "label": "}", "matrix": [8, 5], "w": 1, "x": 17, "y": 2.25 }, + { "label": "|", "matrix": [8, 6], "w": 1.5, "x": 18, "y": 2.25 }, + { "label": "7", "matrix": [8, 7], "w": 1, "x": 20, "y": 2.25 }, + { "label": "8", "matrix": [8, 8], "w": 1, "x": 21, "y": 2.25 }, + { "label": "9", "matrix": [8, 9], "w": 1, "x": 22, "y": 2.25 }, + { "h": 2, "label": "+", "matrix": [8, 10], "w": 1, "x": 23, "y": 2.25 }, + { "label": "4", "matrix": [3, 1], "w": 1, "x": 1, "y": 3.25 }, + { "label": "5", "matrix": [3, 2], "w": 1, "x": 2, "y": 3.25 }, + { "label": "6", "matrix": [3, 3], "w": 1, "x": 3, "y": 3.25 }, + { "label": "Caps Lock", "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 3.25 }, + { "label": "A", "matrix": [3, 5], "w": 1, "x": 6.25, "y": 3.25 }, + { "label": "S", "matrix": [3, 6], "w": 1, "x": 7.25, "y": 3.25 }, + { "label": "D", "matrix": [3, 7], "w": 1, "x": 8.25, "y": 3.25 }, + { "label": "F", "matrix": [3, 8], "w": 1, "x": 9.25, "y": 3.25 }, + { "label": "G", "matrix": [3, 9], "w": 1, "x": 10.25, "y": 3.25 }, + { "label": "H", "matrix": [3, 10], "w": 1, "x": 11.25, "y": 3.25 }, + { "label": "J", "matrix": [9, 0], "w": 1, "x": 12.25, "y": 3.25 }, + { "label": "K", "matrix": [9, 1], "w": 1, "x": 13.25, "y": 3.25 }, + { "label": "L", "matrix": [9, 2], "w": 1, "x": 14.25, "y": 3.25 }, + { "label": ":", "matrix": [9, 3], "w": 1, "x": 15.25, "y": 3.25 }, + { "label": "\"", "matrix": [9, 4], "w": 1, "x": 16.25, "y": 3.25 }, + { "label": "Enter", "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 3.25 }, + { "label": "4", "matrix": [9, 7], "w": 1, "x": 20, "y": 3.25 }, + { "label": "5", "matrix": [9, 8], "w": 1, "x": 21, "y": 3.25 }, + { "label": "6", "matrix": [9, 9], "w": 1, "x": 22, "y": 3.25 }, + { "h": 2, "label": "Enter", "matrix": [4, 0], "w": 1, "x": 0, "y": 4.25 }, + { "label": "1", "matrix": [4, 1], "w": 1, "x": 1, "y": 4.25 }, + { "label": "2", "matrix": [4, 2], "w": 1, "x": 2, "y": 4.25 }, + { "label": "3", "matrix": [4, 3], "w": 1, "x": 3, "y": 4.25 }, + { "label": "\\u2191", "matrix": [4, 4], "w": 1, "x": 4.25, "y": 4.5 }, + { "label": "Shift", "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 4.25 }, + { "label": "Z", "matrix": [4, 6], "w": 1, "x": 6.75, "y": 4.25 }, + { "label": "X", "matrix": [4, 7], "w": 1, "x": 7.75, "y": 4.25 }, + { "label": "C", "matrix": [4, 8], "w": 1, "x": 8.75, "y": 4.25 }, + { "label": "V", "matrix": [4, 9], "w": 1, "x": 9.75, "y": 4.25 }, + { "label": "B", "matrix": [4, 10], "w": 1, "x": 10.75, "y": 4.25 }, + { "label": "N", "matrix": [10, 0], "w": 1, "x": 11.75, "y": 4.25 }, + { "label": "M", "matrix": [10, 1], "w": 1, "x": 12.75, "y": 4.25 }, + { "label": "<", "matrix": [10, 2], "w": 1, "x": 13.75, "y": 4.25 }, + { "label": ">", "matrix": [10, 3], "w": 1, "x": 14.75, "y": 4.25 }, + { "label": "?", "matrix": [10, 4], "w": 1, "x": 15.75, "y": 4.25 }, + { "label": "Shift", "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 4.25 }, + { "label": "\\u2191", "matrix": [9, 6], "w": 1, "x": 18.75, "y": 4.5 }, + { "label": "1", "matrix": [10, 7], "w": 1, "x": 20, "y": 4.25 }, + { "label": "2", "matrix": [10, 8], "w": 1, "x": 21, "y": 4.25 }, + { "label": "3", "matrix": [10, 9], "w": 1, "x": 22, "y": 4.25 }, + { "h": 2, "label": "Enter", "matrix": [10, 10], "w": 1, "x": 23, "y": 4.25 }, + { "label": "0", "matrix": [5, 1], "w": 1, "x": 1, "y": 5.25 }, + { "label": ".", "matrix": [5, 2], "w": 1, "x": 2, "y": 5.25 }, + { "label": "\\u2190", "matrix": [5, 3], "w": 1, "x": 3.25, "y": 5.5 }, + { "label": "\\u2193", "matrix": [5, 4], "w": 1, "x": 4.25, "y": 5.5 }, + { "label": "\\u2192", "matrix": [5, 5], "w": 1, "x": 5.25, "y": 5.5 }, + { "label": "Ctrl", "matrix": [5, 6], "w": 1, "x": 6.5, "y": 5.25 }, + { "label": "Win", "matrix": [5, 7], "w": 1, "x": 7.5, "y": 5.25 }, + { "label": "Alt", "matrix": [5, 8], "w": 1, "x": 8.5, "y": 5.25 }, + { "label": "1u", "matrix": [5, 9], "w": 1, "x": 9.5, "y": 5.25 }, + { "label": "1u", "matrix": [5, 10], "w": 1, "x": 10.5, "y": 5.25 }, + { "label": "1u", "matrix": [11, 0], "w": 1, "x": 11.5, "y": 5.25 }, + { "label": "1u", "matrix": [11, 1], "w": 1, "x": 12.5, "y": 5.25 }, + { "label": "Alt", "matrix": [11, 2], "w": 1, "x": 13.5, "y": 5.25 }, + { "label": "Win", "matrix": [11, 3], "w": 1, "x": 14.5, "y": 5.25 }, + { "label": "Menu", "matrix": [11, 4], "w": 1, "x": 15.5, "y": 5.25 }, + { "label": "Ctrl", "matrix": [11, 5], "w": 1, "x": 16.5, "y": 5.25 }, + { "label": "\\u2190", "matrix": [10, 6], "w": 1, "x": 17.75, "y": 5.5 }, + { "label": "\\u2193", "matrix": [11, 6], "w": 1, "x": 18.75, "y": 5.5 }, + { "label": "\\u2192", "matrix": [11, 7], "w": 1, "x": 19.75, "y": 5.5 }, + { "label": "0", "matrix": [11, 8], "w": 1, "x": 21, "y": 5.25 }, + { "label": ".", "matrix": [11, 9], "w": 1, "x": 22, "y": 5.25 } ] } } diff --git a/keyboards/clueboard/2x1800/2018/rules.mk b/keyboards/clueboard/2x1800/2018/rules.mk index 34d9c2a24e4..c421eb862e9 100644 --- a/keyboards/clueboard/2x1800/2018/rules.mk +++ b/keyboards/clueboard/2x1800/2018/rules.mk @@ -10,15 +10,3 @@ MCU = at90usb1286 # ATmega32A bootloadHID # ATmega328P USBasp BOOTLOADER = halfkay - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode -RGBLIGHT_ENABLE = yes # RGB on port C6 -AUDIO_ENABLE = yes # Audio output on port C4 and B7 diff --git a/keyboards/clueboard/2x1800/2019/2019.h b/keyboards/clueboard/2x1800/2019/2019.h index b9151071fdc..e4738a4b90a 100644 --- a/keyboards/clueboard/2x1800/2019/2019.h +++ b/keyboards/clueboard/2x1800/2019/2019.h @@ -28,227 +28,6 @@ enum TWOx1800_keycodes { #undef SAFE_RANGE #define SAFE_RANGE NEW_SAFE_RANGE -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT_all( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k9a, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9a }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_1u_ansi( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_1u_iso( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k9a, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, KC_NO, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9a }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_2u_ansi( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_2u_iso( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k9a, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, k59, kb0, kb1, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, k59, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, KC_NO, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9a }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, kb1, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_4u_ansi( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, kb0, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_4u_iso( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k9a, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, k58, kb0, kb2, kb3, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, k58, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, KC_NO, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9a }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, kb2, kb3, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_7u_ansi( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, kb0, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, KC_NO, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, KC_NO }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT_7u_iso( \ - e00, e01, e02, e03, \ - k00, k01, k02, k03, k04, k06, k07, k08, k09, k0a, k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85, k87, k88, k89, k8a, \ - k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k90, k91, k92, k93, k94, k9a, k95, k97, k98, k99, \ - k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, ka0, ka1, ka2, ka3, ka4, ka5, k96, ka7, ka8, ka9, kaa, \ - k51, k52, k53, k54, k55, k56, k57, kb0, kb4, kb5, ka6, kb6, kb7, kb8, kb9 \ -) { \ - { k00, k01, k02, k03, k04, KC_NO, k06, k07, k08, k09, k0a }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a }, \ - { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a }, \ - { KC_NO, k51, k52, k53, k54, k55, k56, k57, KC_NO, KC_NO, KC_NO }, \ - { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6a }, \ - { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7a }, \ - { k80, k81, k82, k83, k84, k85, KC_NO, k87, k88, k89, k8a }, \ - { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9a }, \ - { ka0, ka1, ka2, ka3, ka4, ka5, ka6, ka7, ka8, ka9, kaa }, \ - { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, e00, e01, KC_NO, KC_NO, KC_NO, KC_NO, e02, e03 } \ -} - -#define LAYOUT LAYOUT_all - // Encoder update function that returns true/false __attribute__ ((weak)) bool encoder_update_keymap(int8_t index, bool clockwise); diff --git a/keyboards/clueboard/2x1800/2019/config.h b/keyboards/clueboard/2x1800/2019/config.h index b9e087f62ad..595dc61081f 100644 --- a/keyboards/clueboard/2x1800/2019/config.h +++ b/keyboards/clueboard/2x1800/2019/config.h @@ -19,182 +19,18 @@ along with this program. If not, see . #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x23A0 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Clueboard -#define PRODUCT 2x1800 2019 -#define DESCRIPTION Mechanical Drawing Toy Edition - -/* key matrix size */ -#define MATRIX_ROWS 13 -#define MATRIX_COLS 11 - /* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { C0, C1, C2, C3, C7, F7, B1, F2, F3, F4, F5, F6, C6 } -#define MATRIX_COL_PINS { D2, D3, D4, D5, D7, E0, E1, B0, E6, B3, B2 } -#define UNUSED_PINS { D0, D1, D6, C5, E7, F0, F1 } - + * Encoder Assignments + */ #define ENCODERS_PAD_A { A5, A4, A2, A1 } #define ENCODERS_PAD_B { A6, A7, A3, A0 } #define ENCODER_RESOLUTION 4 -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* audio support */ #define B7_AUDIO #define C4_AUDIO #define AUDIO_CLICKY -/* number of backlight levels */ -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN C5 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - /* * Drawing mode */ diff --git a/keyboards/clueboard/2x1800/2019/info.json b/keyboards/clueboard/2x1800/2019/info.json index dcd153c86d1..1d6d8c6ba04 100644 --- a/keyboards/clueboard/2x1800/2019/info.json +++ b/keyboards/clueboard/2x1800/2019/info.json @@ -1,1204 +1,1240 @@ { + "manufacturer": "Clueboard", "keyboard_name": "Clueboard 2x1800 2019", - "url": "", "maintainer": "skullydazed", - "width": 24, "height": 8, + "width": 24, + "debounce": "5", + "diode_direction": "ROW2COL", + "features": { + "audio": true, + "bootmagic": false, + "command": true, + "console": true, + "encoder": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "matrix_pins": { + "cols": ["D2", "D3", "D4", "D5", "D7", "E0", "E1", "B0", "E6", "B3", "B2"], + "rows": ["C0", "C1", "C2", "C3", "C7", "F7", "B1", "F2", "F3", "F4", "F5", "F6", "C6"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x23A0", + "vid": "0xC1ED" + }, + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT_all": { - "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k86", "x":18, "y":3.75, "w":1.5}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k9a", "x":17.25, "y":4.75}, - {"label":"k95", "x":18.25, "y":4.75, "w":1.25}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"k59", "x":9.5, "y":6.75}, - {"label":"k5a", "x":10.5, "y":6.75}, - {"label":"kb0", "x":11.5, "y":6.75}, - {"label":"kb1", "x":12.5, "y":6.75}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} - ] - }, "LAYOUT_1u_ansi": { + "key_count": 131, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k86", "x":18, "y":3.75, "w":1.5}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k95", "x":17.25, "y":4.75, "w":2.25}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"k59", "x":9.5, "y":6.75}, - {"label":"k5a", "x":10.5, "y":6.75}, - {"label":"kb0", "x":11.5, "y":6.75}, - {"label":"kb1", "x":12.5, "y":6.75}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 4.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [5, 9], "w": 1, "x": 9.5, "y": 6.75 }, + { "matrix": [5, 10], "w": 1, "x": 10.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 1, "x": 11.5, "y": 6.75 }, + { "matrix": [11, 1], "w": 1, "x": 12.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_1u_iso": { + "key_count": 131, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k9a", "x":17.25, "y":4.75}, - {"label":"k95", "x":18.25, "y":3.75, "w":1.25, "h":2}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"k59", "x":9.5, "y":6.75}, - {"label":"k5a", "x":10.5, "y":6.75}, - {"label":"kb0", "x":11.5, "y":6.75}, - {"label":"kb1", "x":12.5, "y":6.75}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 10], "w": 1, "x": 17.25, "y": 4.75 }, + { "h": 2, "matrix": [9, 5], "w": 1.25, "x": 18.25, "y": 3.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [5, 9], "w": 1, "x": 9.5, "y": 6.75 }, + { "matrix": [5, 10], "w": 1, "x": 10.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 1, "x": 11.5, "y": 6.75 }, + { "matrix": [11, 1], "w": 1, "x": 12.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_2u_ansi": { + "key_count": 130, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k86", "x":18, "y":3.75, "w":1.5}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k95", "x":17.25, "y":4.75, "w":2.25}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"k59", "x":9.5, "y":6.75}, - {"label":"kb0", "x":10.5, "y":6.75, "w":2}, - {"label":"kb1", "x":12.5, "y":6.75}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 4.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [5, 9], "w": 1, "x": 9.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 2, "x": 10.5, "y": 6.75 }, + { "matrix": [11, 1], "w": 1, "x": 12.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_2u_iso": { + "key_count": 130, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k9a", "x":17.25, "y":4.75}, - {"label":"k95", "x":18.25, "y":3.75, "w":1.25, "h":2}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"k59", "x":9.5, "y":6.75}, - {"label":"kb0", "x":10.5, "y":6.75, "w":2}, - {"label":"kb1", "x":12.5, "y":6.75}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 10], "w": 1, "x": 17.25, "y": 4.75 }, + { "h": 2, "matrix": [9, 5], "w": 1.25, "x": 18.25, "y": 3.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [5, 9], "w": 1, "x": 9.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 2, "x": 10.5, "y": 6.75 }, + { "matrix": [11, 1], "w": 1, "x": 12.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_4u_ansi": { + "key_count": 128, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k86", "x":18, "y":3.75, "w":1.5}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k95", "x":17.25, "y":4.75, "w":2.25}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"kb0", "x":9.5, "y":6.75, "w":4}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 4.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 4, "x": 9.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_4u_iso": { + "key_count": 128, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k9a", "x":17.25, "y":4.75}, - {"label":"k95", "x":18.25, "y":3.75, "w":1.25, "h":2}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"k58", "x":8.5, "y":6.75}, - {"label":"kb0", "x":9.5, "y":6.75, "w":4}, - {"label":"kb2", "x":13.5, "y":6.75}, - {"label":"kb3", "x":14.5, "y":6.75}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 10], "w": 1, "x": 17.25, "y": 4.75 }, + { "h": 2, "matrix": [9, 5], "w": 1.25, "x": 18.25, "y": 3.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 4, "x": 9.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_7u_ansi": { + "key_count": 125, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k86", "x":18, "y":3.75, "w":1.5}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k95", "x":17.25, "y":4.75, "w":2.25}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"kb0", "x":8.5, "y":6.75, "w":7}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 5], "w": 2.25, "x": 17.25, "y": 4.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 7, "x": 8.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] }, "LAYOUT_7u_iso": { + "key_count": 125, "layout": [ - {"label":"e00", "x":3, "y":0}, - {"label":"e01", "x":4, "y":0}, - {"label":"e02", "x":19, "y":0}, - {"label":"e03", "x":20, "y":0}, - {"label":"k00", "x":0, "y":1.5}, - {"label":"k01", "x":1, "y":1.5}, - {"label":"k02", "x":2, "y":1.5}, - {"label":"k03", "x":3, "y":1.5}, - {"label":"k04", "x":4.75, "y":1.5}, - {"label":"k06", "x":6.25, "y":1.5}, - {"label":"k07", "x":7.25, "y":1.5}, - {"label":"k08", "x":8.25, "y":1.5}, - {"label":"k09", "x":9.25, "y":1.5}, - {"label":"k0a", "x":10.75, "y":1.5}, - {"label":"k60", "x":11.75, "y":1.5}, - {"label":"k61", "x":12.75, "y":1.5}, - {"label":"k62", "x":13.75, "y":1.5}, - {"label":"k63", "x":15.25, "y":1.5}, - {"label":"k64", "x":16.25, "y":1.5}, - {"label":"k65", "x":17.25, "y":1.5}, - {"label":"k66", "x":18.25, "y":1.5}, - {"label":"k67", "x":20, "y":1.5}, - {"label":"k68", "x":21, "y":1.5}, - {"label":"k69", "x":22, "y":1.5}, - {"label":"k6a", "x":23, "y":1.5}, - {"label":"k10", "x":0, "y":2.75}, - {"label":"k11", "x":1, "y":2.75}, - {"label":"k12", "x":2, "y":2.75}, - {"label":"k13", "x":3, "y":2.75}, - {"label":"k14", "x":4.5, "y":2.75}, - {"label":"k15", "x":5.5, "y":2.75}, - {"label":"k16", "x":6.5, "y":2.75}, - {"label":"k17", "x":7.5, "y":2.75}, - {"label":"k18", "x":8.5, "y":2.75}, - {"label":"k19", "x":9.5, "y":2.75}, - {"label":"k1a", "x":10.5, "y":2.75}, - {"label":"k70", "x":11.5, "y":2.75}, - {"label":"k71", "x":12.5, "y":2.75}, - {"label":"k72", "x":13.5, "y":2.75}, - {"label":"k73", "x":14.5, "y":2.75}, - {"label":"k74", "x":15.5, "y":2.75}, - {"label":"k75", "x":16.5, "y":2.75}, - {"label":"k76", "x":17.5, "y":2.75, "w":2}, - {"label":"k77", "x":20, "y":2.75}, - {"label":"k78", "x":21, "y":2.75}, - {"label":"k79", "x":22, "y":2.75}, - {"label":"k7a", "x":23, "y":2.75}, - {"label":"k20", "x":0, "y":3.75, "h":2}, - {"label":"k21", "x":1, "y":3.75}, - {"label":"k22", "x":2, "y":3.75}, - {"label":"k23", "x":3, "y":3.75}, - {"label":"k24", "x":4.5, "y":3.75, "w":1.5}, - {"label":"k25", "x":6, "y":3.75}, - {"label":"k26", "x":7, "y":3.75}, - {"label":"k27", "x":8, "y":3.75}, - {"label":"k28", "x":9, "y":3.75}, - {"label":"k29", "x":10, "y":3.75}, - {"label":"k2a", "x":11, "y":3.75}, - {"label":"k80", "x":12, "y":3.75}, - {"label":"k81", "x":13, "y":3.75}, - {"label":"k82", "x":14, "y":3.75}, - {"label":"k83", "x":15, "y":3.75}, - {"label":"k84", "x":16, "y":3.75}, - {"label":"k85", "x":17, "y":3.75}, - {"label":"k87", "x":20, "y":3.75}, - {"label":"k88", "x":21, "y":3.75}, - {"label":"k89", "x":22, "y":3.75}, - {"label":"k8a", "x":23, "y":3.75, "h":2}, - {"label":"k31", "x":1, "y":4.75}, - {"label":"k32", "x":2, "y":4.75}, - {"label":"k33", "x":3, "y":4.75}, - {"label":"k34", "x":4.5, "y":4.75, "w":1.75}, - {"label":"k35", "x":6.25, "y":4.75}, - {"label":"k36", "x":7.25, "y":4.75}, - {"label":"k37", "x":8.25, "y":4.75}, - {"label":"k38", "x":9.25, "y":4.75}, - {"label":"k39", "x":10.25, "y":4.75}, - {"label":"k3a", "x":11.25, "y":4.75}, - {"label":"k90", "x":12.25, "y":4.75}, - {"label":"k91", "x":13.25, "y":4.75}, - {"label":"k92", "x":14.25, "y":4.75}, - {"label":"k93", "x":15.25, "y":4.75}, - {"label":"k94", "x":16.25, "y":4.75}, - {"label":"k9a", "x":17.25, "y":4.75}, - {"label":"k95", "x":18.25, "y":3.75, "w":1.25, "h":2}, - {"label":"k97", "x":20, "y":4.75}, - {"label":"k98", "x":21, "y":4.75}, - {"label":"k99", "x":22, "y":4.75}, - {"label":"k40", "x":0, "y":5.75, "h":2}, - {"label":"k41", "x":1, "y":5.75}, - {"label":"k42", "x":2, "y":5.75}, - {"label":"k43", "x":3, "y":5.75}, - {"label":"k44", "x":4.25, "y":6}, - {"label":"k45", "x":5.5, "y":5.75, "w":1.25}, - {"label":"k46", "x":6.75, "y":5.75}, - {"label":"k47", "x":7.75, "y":5.75}, - {"label":"k48", "x":8.75, "y":5.75}, - {"label":"k49", "x":9.75, "y":5.75}, - {"label":"k4a", "x":10.75, "y":5.75}, - {"label":"ka0", "x":11.75, "y":5.75}, - {"label":"ka1", "x":12.75, "y":5.75}, - {"label":"ka2", "x":13.75, "y":5.75}, - {"label":"ka3", "x":14.75, "y":5.75}, - {"label":"ka4", "x":15.75, "y":5.75}, - {"label":"ka5", "x":16.75, "y":5.75, "w":1.75}, - {"label":"k96", "x":18.75, "y":6}, - {"label":"ka7", "x":20, "y":5.75}, - {"label":"ka8", "x":21, "y":5.75}, - {"label":"ka9", "x":22, "y":5.75}, - {"label":"kaa", "x":23, "y":5.75, "h":2}, - {"label":"k51", "x":1, "y":6.75}, - {"label":"k52", "x":2, "y":6.75}, - {"label":"k53", "x":3.25, "y":7}, - {"label":"k54", "x":4.25, "y":7}, - {"label":"k55", "x":5.25, "y":7}, - {"label":"k56", "x":6.5, "y":6.75}, - {"label":"k57", "x":7.5, "y":6.75}, - {"label":"kb0", "x":8.5, "y":6.75, "w":7}, - {"label":"kb4", "x":15.5, "y":6.75}, - {"label":"kb5", "x":16.5, "y":6.75}, - {"label":"ka6", "x":17.75, "y":7}, - {"label":"kb6", "x":18.75, "y":7}, - {"label":"kb7", "x":19.75, "y":7}, - {"label":"kb8", "x":21, "y":6.75}, - {"label":"kb9", "x":22, "y":6.75} + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 10], "w": 1, "x": 17.25, "y": 4.75 }, + { "h": 2, "matrix": [9, 5], "w": 1.25, "x": 18.25, "y": 3.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 7, "x": 8.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } + ] + }, + "LAYOUT_all": { + "key_count": 132, + "layout": [ + { "matrix": [12, 3], "w": 1, "x": 3, "y": 0 }, + { "matrix": [12, 4], "w": 1, "x": 4, "y": 0 }, + { "matrix": [12, 9], "w": 1, "x": 19, "y": 0 }, + { "matrix": [12, 10], "w": 1, "x": 20, "y": 0 }, + { "matrix": [0, 0], "w": 1, "x": 0, "y": 1.5 }, + { "matrix": [0, 1], "w": 1, "x": 1, "y": 1.5 }, + { "matrix": [0, 2], "w": 1, "x": 2, "y": 1.5 }, + { "matrix": [0, 3], "w": 1, "x": 3, "y": 1.5 }, + { "matrix": [0, 4], "w": 1, "x": 4.75, "y": 1.5 }, + { "matrix": [0, 6], "w": 1, "x": 6.25, "y": 1.5 }, + { "matrix": [0, 7], "w": 1, "x": 7.25, "y": 1.5 }, + { "matrix": [0, 8], "w": 1, "x": 8.25, "y": 1.5 }, + { "matrix": [0, 9], "w": 1, "x": 9.25, "y": 1.5 }, + { "matrix": [0, 10], "w": 1, "x": 10.75, "y": 1.5 }, + { "matrix": [6, 0], "w": 1, "x": 11.75, "y": 1.5 }, + { "matrix": [6, 1], "w": 1, "x": 12.75, "y": 1.5 }, + { "matrix": [6, 2], "w": 1, "x": 13.75, "y": 1.5 }, + { "matrix": [6, 3], "w": 1, "x": 15.25, "y": 1.5 }, + { "matrix": [6, 4], "w": 1, "x": 16.25, "y": 1.5 }, + { "matrix": [6, 5], "w": 1, "x": 17.25, "y": 1.5 }, + { "matrix": [6, 6], "w": 1, "x": 18.25, "y": 1.5 }, + { "matrix": [6, 7], "w": 1, "x": 20, "y": 1.5 }, + { "matrix": [6, 8], "w": 1, "x": 21, "y": 1.5 }, + { "matrix": [6, 9], "w": 1, "x": 22, "y": 1.5 }, + { "matrix": [6, 10], "w": 1, "x": 23, "y": 1.5 }, + { "matrix": [1, 0], "w": 1, "x": 0, "y": 2.75 }, + { "matrix": [1, 1], "w": 1, "x": 1, "y": 2.75 }, + { "matrix": [1, 2], "w": 1, "x": 2, "y": 2.75 }, + { "matrix": [1, 3], "w": 1, "x": 3, "y": 2.75 }, + { "matrix": [1, 4], "w": 1, "x": 4.5, "y": 2.75 }, + { "matrix": [1, 5], "w": 1, "x": 5.5, "y": 2.75 }, + { "matrix": [1, 6], "w": 1, "x": 6.5, "y": 2.75 }, + { "matrix": [1, 7], "w": 1, "x": 7.5, "y": 2.75 }, + { "matrix": [1, 8], "w": 1, "x": 8.5, "y": 2.75 }, + { "matrix": [1, 9], "w": 1, "x": 9.5, "y": 2.75 }, + { "matrix": [1, 10], "w": 1, "x": 10.5, "y": 2.75 }, + { "matrix": [7, 0], "w": 1, "x": 11.5, "y": 2.75 }, + { "matrix": [7, 1], "w": 1, "x": 12.5, "y": 2.75 }, + { "matrix": [7, 2], "w": 1, "x": 13.5, "y": 2.75 }, + { "matrix": [7, 3], "w": 1, "x": 14.5, "y": 2.75 }, + { "matrix": [7, 4], "w": 1, "x": 15.5, "y": 2.75 }, + { "matrix": [7, 5], "w": 1, "x": 16.5, "y": 2.75 }, + { "matrix": [7, 6], "w": 2, "x": 17.5, "y": 2.75 }, + { "matrix": [7, 7], "w": 1, "x": 20, "y": 2.75 }, + { "matrix": [7, 8], "w": 1, "x": 21, "y": 2.75 }, + { "matrix": [7, 9], "w": 1, "x": 22, "y": 2.75 }, + { "matrix": [7, 10], "w": 1, "x": 23, "y": 2.75 }, + { "h": 2, "matrix": [2, 0], "w": 1, "x": 0, "y": 3.75 }, + { "matrix": [2, 1], "w": 1, "x": 1, "y": 3.75 }, + { "matrix": [2, 2], "w": 1, "x": 2, "y": 3.75 }, + { "matrix": [2, 3], "w": 1, "x": 3, "y": 3.75 }, + { "matrix": [2, 4], "w": 1.5, "x": 4.5, "y": 3.75 }, + { "matrix": [2, 5], "w": 1, "x": 6, "y": 3.75 }, + { "matrix": [2, 6], "w": 1, "x": 7, "y": 3.75 }, + { "matrix": [2, 7], "w": 1, "x": 8, "y": 3.75 }, + { "matrix": [2, 8], "w": 1, "x": 9, "y": 3.75 }, + { "matrix": [2, 9], "w": 1, "x": 10, "y": 3.75 }, + { "matrix": [2, 10], "w": 1, "x": 11, "y": 3.75 }, + { "matrix": [8, 0], "w": 1, "x": 12, "y": 3.75 }, + { "matrix": [8, 1], "w": 1, "x": 13, "y": 3.75 }, + { "matrix": [8, 2], "w": 1, "x": 14, "y": 3.75 }, + { "matrix": [8, 3], "w": 1, "x": 15, "y": 3.75 }, + { "matrix": [8, 4], "w": 1, "x": 16, "y": 3.75 }, + { "matrix": [8, 5], "w": 1, "x": 17, "y": 3.75 }, + { "matrix": [8, 6], "w": 1.5, "x": 18, "y": 3.75 }, + { "matrix": [8, 7], "w": 1, "x": 20, "y": 3.75 }, + { "matrix": [8, 8], "w": 1, "x": 21, "y": 3.75 }, + { "matrix": [8, 9], "w": 1, "x": 22, "y": 3.75 }, + { "h": 2, "matrix": [8, 10], "w": 1, "x": 23, "y": 3.75 }, + { "matrix": [3, 1], "w": 1, "x": 1, "y": 4.75 }, + { "matrix": [3, 2], "w": 1, "x": 2, "y": 4.75 }, + { "matrix": [3, 3], "w": 1, "x": 3, "y": 4.75 }, + { "matrix": [3, 4], "w": 1.75, "x": 4.5, "y": 4.75 }, + { "matrix": [3, 5], "w": 1, "x": 6.25, "y": 4.75 }, + { "matrix": [3, 6], "w": 1, "x": 7.25, "y": 4.75 }, + { "matrix": [3, 7], "w": 1, "x": 8.25, "y": 4.75 }, + { "matrix": [3, 8], "w": 1, "x": 9.25, "y": 4.75 }, + { "matrix": [3, 9], "w": 1, "x": 10.25, "y": 4.75 }, + { "matrix": [3, 10], "w": 1, "x": 11.25, "y": 4.75 }, + { "matrix": [9, 0], "w": 1, "x": 12.25, "y": 4.75 }, + { "matrix": [9, 1], "w": 1, "x": 13.25, "y": 4.75 }, + { "matrix": [9, 2], "w": 1, "x": 14.25, "y": 4.75 }, + { "matrix": [9, 3], "w": 1, "x": 15.25, "y": 4.75 }, + { "matrix": [9, 4], "w": 1, "x": 16.25, "y": 4.75 }, + { "matrix": [9, 10], "w": 1, "x": 17.25, "y": 4.75 }, + { "matrix": [9, 5], "w": 1.25, "x": 18.25, "y": 4.75 }, + { "matrix": [9, 7], "w": 1, "x": 20, "y": 4.75 }, + { "matrix": [9, 8], "w": 1, "x": 21, "y": 4.75 }, + { "matrix": [9, 9], "w": 1, "x": 22, "y": 4.75 }, + { "h": 2, "matrix": [4, 0], "w": 1, "x": 0, "y": 5.75 }, + { "matrix": [4, 1], "w": 1, "x": 1, "y": 5.75 }, + { "matrix": [4, 2], "w": 1, "x": 2, "y": 5.75 }, + { "matrix": [4, 3], "w": 1, "x": 3, "y": 5.75 }, + { "matrix": [4, 4], "w": 1, "x": 4.25, "y": 6 }, + { "matrix": [4, 5], "w": 1.25, "x": 5.5, "y": 5.75 }, + { "matrix": [4, 6], "w": 1, "x": 6.75, "y": 5.75 }, + { "matrix": [4, 7], "w": 1, "x": 7.75, "y": 5.75 }, + { "matrix": [4, 8], "w": 1, "x": 8.75, "y": 5.75 }, + { "matrix": [4, 9], "w": 1, "x": 9.75, "y": 5.75 }, + { "matrix": [4, 10], "w": 1, "x": 10.75, "y": 5.75 }, + { "matrix": [10, 0], "w": 1, "x": 11.75, "y": 5.75 }, + { "matrix": [10, 1], "w": 1, "x": 12.75, "y": 5.75 }, + { "matrix": [10, 2], "w": 1, "x": 13.75, "y": 5.75 }, + { "matrix": [10, 3], "w": 1, "x": 14.75, "y": 5.75 }, + { "matrix": [10, 4], "w": 1, "x": 15.75, "y": 5.75 }, + { "matrix": [10, 5], "w": 1.75, "x": 16.75, "y": 5.75 }, + { "matrix": [9, 6], "w": 1, "x": 18.75, "y": 6 }, + { "matrix": [10, 7], "w": 1, "x": 20, "y": 5.75 }, + { "matrix": [10, 8], "w": 1, "x": 21, "y": 5.75 }, + { "matrix": [10, 9], "w": 1, "x": 22, "y": 5.75 }, + { "h": 2, "matrix": [10, 10], "w": 1, "x": 23, "y": 5.75 }, + { "matrix": [5, 1], "w": 1, "x": 1, "y": 6.75 }, + { "matrix": [5, 2], "w": 1, "x": 2, "y": 6.75 }, + { "matrix": [5, 3], "w": 1, "x": 3.25, "y": 7 }, + { "matrix": [5, 4], "w": 1, "x": 4.25, "y": 7 }, + { "matrix": [5, 5], "w": 1, "x": 5.25, "y": 7 }, + { "matrix": [5, 6], "w": 1, "x": 6.5, "y": 6.75 }, + { "matrix": [5, 7], "w": 1, "x": 7.5, "y": 6.75 }, + { "matrix": [5, 8], "w": 1, "x": 8.5, "y": 6.75 }, + { "matrix": [5, 9], "w": 1, "x": 9.5, "y": 6.75 }, + { "matrix": [5, 10], "w": 1, "x": 10.5, "y": 6.75 }, + { "matrix": [11, 0], "w": 1, "x": 11.5, "y": 6.75 }, + { "matrix": [11, 1], "w": 1, "x": 12.5, "y": 6.75 }, + { "matrix": [11, 2], "w": 1, "x": 13.5, "y": 6.75 }, + { "matrix": [11, 3], "w": 1, "x": 14.5, "y": 6.75 }, + { "matrix": [11, 4], "w": 1, "x": 15.5, "y": 6.75 }, + { "matrix": [11, 5], "w": 1, "x": 16.5, "y": 6.75 }, + { "matrix": [10, 6], "w": 1, "x": 17.75, "y": 7 }, + { "matrix": [11, 6], "w": 1, "x": 18.75, "y": 7 }, + { "matrix": [11, 7], "w": 1, "x": 19.75, "y": 7 }, + { "matrix": [11, 8], "w": 1, "x": 21, "y": 6.75 }, + { "matrix": [11, 9], "w": 1, "x": 22, "y": 6.75 } ] } } diff --git a/keyboards/clueboard/2x1800/2019/keymaps/default/keymap.json b/keyboards/clueboard/2x1800/2019/keymaps/default/keymap.json index f5d901ab61b..3a60ce9c82b 100644 --- a/keyboards/clueboard/2x1800/2019/keymaps/default/keymap.json +++ b/keyboards/clueboard/2x1800/2019/keymaps/default/keymap.json @@ -1,7 +1,7 @@ { "keyboard":"clueboard/2x1800/2019", "keymap":"default", - "layout":"LAYOUT", + "layout":"LAYOUT_all", "layers":[ ["ENC_BTN1","ENC_BTN2","ENC_BTN3","ENC_BTN4","KC_HOME","KC_END","KC_PGUP","KC_PGDN","KC_ESC","KC_F1","KC_F2","KC_F3","KC_F4","KC_F5","KC_F6","KC_F7","KC_F8","KC_F9","KC_F10","KC_F11","KC_F12","KC_PSCR","KC_SLCK","KC_PAUS","KC_INS","KC_PMNS","KC_NLCK","KC_PSLS","KC_PAST","KC_GRV","KC_1","KC_2","KC_3","KC_4","KC_5","KC_6","KC_7","KC_8","KC_9","KC_0","KC_MINS","KC_EQL","KC_BSPC","KC_NLCK","KC_PSLS","KC_PAST","KC_PMNS","KC_PPLS","KC_P7","KC_P8","KC_P9","KC_TAB","KC_Q","KC_W","KC_E","KC_R","KC_T","KC_Y","KC_U","KC_I","KC_O","KC_P","KC_LBRC","KC_RBRC","KC_BSLS","KC_P7","KC_P8","KC_P9","KC_PSLS","KC_P4","KC_P5","KC_P6","KC_CAPS","KC_A","KC_S","KC_D","KC_F","KC_G","KC_H","KC_J","KC_K","KC_L","KC_SCLN","KC_QUOT","KC_NUHS","KC_ENT","KC_P4","KC_P5","KC_P6","KC_PENT","KC_P1","KC_P2","KC_P3","KC_UP","KC_LSFT","KC_Z","KC_X","KC_C","KC_V","KC_B","KC_N","KC_M","KC_SLSH","KC_COMM","KC_DOT","KC_RSFT","KC_UP","KC_P1","KC_P2","KC_P3","KC_PENT","KC_P0","KC_PDOT","KC_LEFT","KC_DOWN","KC_RGHT","KC_LCTL","KC_LGUI","KC_LALT","KC_SPC","KC_SPC","KC_SPC","KC_SPC","KC_RALT","KC_RGUI","KC_APP","KC_RCTL","KC_LEFT","KC_DOWN","KC_RGHT","KC_P0","KC_PDOT"] ], diff --git a/keyboards/clueboard/2x1800/2019/rules.mk b/keyboards/clueboard/2x1800/2019/rules.mk index dcad3ec90e8..c421eb862e9 100644 --- a/keyboards/clueboard/2x1800/2019/rules.mk +++ b/keyboards/clueboard/2x1800/2019/rules.mk @@ -10,16 +10,3 @@ MCU = at90usb1286 # ATmega32A bootloadHID # ATmega328P USBasp BOOTLOADER = halfkay - -# Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -ENCODER_ENABLE = yes # Rotary encoder (knob) support -NKRO_ENABLE = yes # USB Nkey Rollover -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode -RGBLIGHT_ENABLE = yes # RGB on pin C5 -AUDIO_ENABLE = yes # Audio output on pin C4 and B7 diff --git a/keyboards/clueboard/2x1800/info.json b/keyboards/clueboard/2x1800/info.json index 785743a3074..55207e2b4dc 100644 --- a/keyboards/clueboard/2x1800/info.json +++ b/keyboards/clueboard/2x1800/info.json @@ -1,5 +1,4 @@ { - "keyboard_name": "Clueboard 2x1800", - "url": "", - "maintainer": "skullydazed" + "diode_direction": "ROW2COL", + "width": 24 } diff --git a/keyboards/clueboard/60/60.h b/keyboards/clueboard/60/60.h index 713f0d42be8..0345f419fa4 100644 --- a/keyboards/clueboard/60/60.h +++ b/keyboards/clueboard/60/60.h @@ -18,91 +18,4 @@ #include "quantum.h" -/* - * These are shortcuts to help you work with the various layout options. If your - * keymap works with one of the LAYOUT_...() macros you are encouraged to use that - * and to contribute your keymap to the corresponding layout in - * `qmk_firmware/layouts/community`. - */ - -/* The fully-featured LAYOUT_all() that has every single key available in the matrix. - */ -#define LAYOUT_all(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* A layout that matches the Apple Extended Keyboard's main area. No split keys, - * 3 mods on either side of the spacebar. - */ -#define LAYOUT_aek(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Standard 60% ANSI layout */ -#define LAYOUT_60_ansi(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Standard 60% ISO layout */ -#define LAYOUT_60_iso(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, KC_NO, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, KC_NO, k2e, }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, KC_NO, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -/* Split Backspace and Right Shift ANSI layout. */ -#define LAYOUT_60_ansi_split_bs_rshift(\ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3e, \ - k40, k41, k42, k47, k4a, k4b, k4c, k4e \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, KC_NO, k1e, }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, KC_NO, k2e, }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, KC_NO, k3e, }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, k4a, k4b, k4c, KC_NO, k4e, }, \ -} - -#define LAYOUT LAYOUT_all -#define KEYMAP LAYOUT_all #endif diff --git a/keyboards/clueboard/60/config.h b/keyboards/clueboard/60/config.h index 3f54d0a9da6..1ca9d9844e0 100644 --- a/keyboards/clueboard/60/config.h +++ b/keyboards/clueboard/60/config.h @@ -19,110 +19,12 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2350 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard 60% -#define DESCRIPTION Clueboard 60% - /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up here: * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf */ #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * COLS: Pins used for columns, left to right - * ROWS: Pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 } -#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C15, C14, C13, B5, B6 } -#define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 } -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 6 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#define LED_CAPS_LOCK_PIN B7 - /* Backlight configuration */ #define BACKLIGHT_LEVELS 1 diff --git a/keyboards/clueboard/60/info.json b/keyboards/clueboard/60/info.json index aed18b6f05c..1df0512ad3d 100644 --- a/keyboards/clueboard/60/info.json +++ b/keyboards/clueboard/60/info.json @@ -1,58 +1,373 @@ { - "keyboard_name": "clueboard/60", + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 60%", "maintainer": "skullydazed", - "url": "", - "width": 15, "height": 5, + "width": 15, + "debounce": "6", + "diode_direction": "COL2ROW", + "features": { + "audio": true, + "backlight": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "mousekey": true, + "nkro": true + }, + "indicators": { + "caps_lock": "B7" + }, + "matrix_pins": { + "cols": ["A2", "A3", "A6", "B14", "B15", "A8", "A9", "A7", "B3", "B4", "C15", "C14", "C13", "B5", "B6"], + "rows": ["B0", "B1", "B2", "A15", "A10"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2350", + "vid": "0xC1ED" + }, + "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_iso"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, "layouts": { "LAYOUT_60_ansi": { "key_count": 61, "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [0, 14], "w": 2, "x": 13, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [1, 14], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [2, 14], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 12], "w": 2.75, "x": 12.25, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k47", "matrix": [4, 7], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [4, 10], "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 14], "w": 1.25, "x": 13.75, "y": 4 } ] - }, - "LAYOUT_60_iso": { - "key_count": 62, - "layout": [ - {"label": "\\u00ac", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "\"", "x": 2, "y": 0}, {"label": "\\u00a3", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "@", "x": 11.75, "y": 2}, {"label": "~", "x": 12.75, "y": 2}, - {"label": "Shift", "x": 0, "y": 3, "w": 1.25}, {"label": "|", "x": 1.25, "y": 3}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "AltGr", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - }, - "LAYOUT_aek": { - "key_count": 60, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"label": "Backspace", "x": 13, "y": 0, "w": 2}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 2.75}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.5}, {"label": "Win", "x": 1.5, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.75, "y": 4, "w": 1.5}, {"x": 4.25, "y": 4, "w": 6.5}, {"label": "AltGr", "x": 10.75, "y": 4, "w": 1.5}, {"label": "Win", "x": 12.25, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.5, "y": 4, "w": 1.5 } - ] - }, - "LAYOUT_all": { - "key_count": 65, - "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"x": 13, "y": 0}, {"label": "Back", "x": 14, "y": 0}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"x": 12.75, "y": 2}, {"label": "Enter", "x": 13.75, "y": 2, "w": 1.25}, - {"x": 0, "y": 3}, {"label": "Shift", "x": 1, "y": 3, "w": 1.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 1.75}, {"x": 14, "y": 3}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 } - ] - }, + }, "LAYOUT_60_ansi_split_bs_rshift": { "key_count": 63, "layout": [ - {"label": "~", "x": 0, "y": 0}, {"label": "!", "x": 1, "y": 0}, {"label": "@", "x": 2, "y": 0}, {"label": "#", "x": 3, "y": 0}, {"label": "$", "x": 4, "y": 0}, {"label": "%", "x": 5, "y": 0}, {"label": "^", "x": 6, "y": 0}, {"label": "&", "x": 7, "y": 0}, {"label": "*", "x": 8, "y": 0}, {"label": "(", "x": 9, "y": 0}, {"label": ")", "x": 10, "y": 0}, {"label": "_", "x": 11, "y": 0}, {"label": "+", "x": 12, "y": 0}, {"x": 13, "y": 0}, {"label": "Back", "x": 14, "y": 0}, - {"label": "Tab", "x": 0, "y": 1, "w": 1.5}, {"label": "Q", "x": 1.5, "y": 1}, {"label": "W", "x": 2.5, "y": 1}, {"label": "E", "x": 3.5, "y": 1}, {"label": "R", "x": 4.5, "y": 1}, {"label": "T", "x": 5.5, "y": 1}, {"label": "Y", "x": 6.5, "y": 1}, {"label": "U", "x": 7.5, "y": 1}, {"label": "I", "x": 8.5, "y": 1}, {"label": "O", "x": 9.5, "y": 1}, {"label": "P", "x": 10.5, "y": 1}, {"label": "{", "x": 11.5, "y": 1}, {"label": "}", "x": 12.5, "y": 1}, {"label": "|", "x": 13.5, "y": 1, "w": 1.5}, - {"label": "Caps Lock", "x": 0, "y": 2, "w": 1.75}, {"label": "A", "x": 1.75, "y": 2}, {"label": "S", "x": 2.75, "y": 2}, {"label": "D", "x": 3.75, "y": 2}, {"label": "F", "x": 4.75, "y": 2}, {"label": "G", "x": 5.75, "y": 2}, {"label": "H", "x": 6.75, "y": 2}, {"label": "J", "x": 7.75, "y": 2}, {"label": "K", "x": 8.75, "y": 2}, {"label": "L", "x": 9.75, "y": 2}, {"label": ":", "x": 10.75, "y": 2}, {"label": "\"", "x": 11.75, "y": 2}, {"label": "Enter", "x": 12.75, "y": 2, "w": 2.25}, - {"label": "Shift", "x": 0, "y": 3, "w": 2.25}, {"label": "Z", "x": 2.25, "y": 3}, {"label": "X", "x": 3.25, "y": 3}, {"label": "C", "x": 4.25, "y": 3}, {"label": "V", "x": 5.25, "y": 3}, {"label": "B", "x": 6.25, "y": 3}, {"label": "N", "x": 7.25, "y": 3}, {"label": "M", "x": 8.25, "y": 3}, {"label": "<", "x": 9.25, "y": 3}, {"label": ">", "x": 10.25, "y": 3}, {"label": "?", "x": 11.25, "y": 3}, {"label": "Shift", "x": 12.25, "y": 3, "w": 1.75}, {"x": 14, "y": 3}, - {"label": "Ctrl", "x": 0, "y": 4, "w": 1.25}, {"label": "Win", "x": 1.25, "y": 4, "w": 1.25}, {"label": "Alt", "x": 2.5, "y": 4, "w": 1.25}, {"x": 3.75, "y": 4, "w": 6.25}, {"label": "Alt", "x": 10, "y": 4, "w": 1.25}, {"label": "Win", "x": 11.25, "y": 4, "w": 1.25}, {"label": "Menu", "x": 12.5, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25} + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "k0d", "matrix": [0, 13], "w": 1, "x": 13, "y": 0 }, + { "label": "Back", "matrix": [0, 14], "w": 1, "x": 14, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [1, 14], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [2, 14], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3 }, + { "label": "k3e", "matrix": [3, 14], "w": 1, "x": 14, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k47", "matrix": [4, 7], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [4, 10], "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 14], "w": 1.25, "x": 13.75, "y": 4 } + ] + }, + "LAYOUT_60_iso": { + "key_count": 62, + "layout": [ + { "label": "\\u00ac", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "\"", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "\\u00a3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [0, 14], "w": 2, "x": 13, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "h": 2, "label": "Enter", "matrix": [2, 0], "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 1], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 2], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 3], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 4], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 5], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 6], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 7], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 8], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 9], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 10], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 11], "w": 1, "x": 10.75, "y": 2 }, + { "label": "@", "matrix": [2, 12], "w": 1, "x": 11.75, "y": 2 }, + { "label": "~", "matrix": [2, 14], "w": 1, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "|", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 12], "w": 2.75, "x": 12.25, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k47", "matrix": [4, 7], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "AltGr", "matrix": [4, 10], "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 14], "w": 1.25, "x": 13.75, "y": 4 } + ] + }, + "LAYOUT_aek": { + "key_count": 60, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [0, 14], "w": 2, "x": 13, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [1, 14], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [2, 14], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 12], "w": 2.75, "x": 12.25, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.5, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.5, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.5, "x": 2.75, "y": 4 }, + { "label": "k47", "matrix": [4, 7], "w": 6.5, "x": 4.25, "y": 4 }, + { "label": "AltGr", "matrix": [4, 11], "w": 1.5, "x": 10.75, "y": 4 }, + { "label": "Win", "matrix": [4, 12], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 14], "w": 1.5, "x": 13.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 65, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "k0d", "matrix": [0, 13], "w": 1, "x": 13, "y": 0 }, + { "label": "Back", "matrix": [0, 14], "w": 1, "x": 14, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [1, 14], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "k2c", "matrix": [2, 12], "w": 1, "x": 12.75, "y": 2 }, + { "label": "Enter", "matrix": [2, 14], "w": 1.25, "x": 13.75, "y": 2 }, + { "label": "k30", "matrix": [3, 0], "w": 1, "x": 0, "y": 3 }, + { "label": "Shift", "matrix": [3, 1], "w": 1.25, "x": 1, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 12], "w": 1.75, "x": 12.25, "y": 3 }, + { "label": "k3e", "matrix": [3, 14], "w": 1, "x": 14, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k47", "matrix": [4, 7], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [4, 10], "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "matrix": [4, 11], "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 14], "w": 1.25, "x": 13.75, "y": 4 } ] } } diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk index 87f56692f6d..7e85acec655 100644 --- a/keyboards/clueboard/60/rules.mk +++ b/keyboards/clueboard/60/rules.mk @@ -2,18 +2,5 @@ MCU = STM32F303 BOARD = QMK_PROTON_C -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = yes - # project specific files SRC = led.c -LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso diff --git a/keyboards/clueboard/66/info.json b/keyboards/clueboard/66/info.json index 514ba456dab..df88648d802 100644 --- a/keyboards/clueboard/66/info.json +++ b/keyboards/clueboard/66/info.json @@ -1,36 +1,4 @@ { - "keyboard_name": "Clueboard 66%", "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, - {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, - {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 12.75, "y": 2, "w": 1, "label": "ISOHASH"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, - {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 1.25, "y": 3, "w": 1, "label": "ISOBACKSLASH"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 12.25, "y": 3, "w": 1, "label": "JPBACKSLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, - {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"} - ] - }, - - "LAYOUT_66_ansi": { - "layout": [ - {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Win", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4} - ] - }, - - "LAYOUT_66_iso": { - "layout": [ - {"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.5, "y":0}, - {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":15.5, "y":1}, - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, - {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3, "w":1}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"\u2191", "x":14.5, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6}, {"label":"Alt", "x":9.75, "y":4, "w":1.25}, {"label":"Ctrl", "x":11, "y":4, "w":1.25}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13.5, "y":4}, {"label":"\u2193", "x":14.5, "y":4}, {"label":"\u2192", "x":15.5, "y":4} - ] - } - } + "height": 5 } diff --git a/keyboards/clueboard/66/rev1/config.h b/keyboards/clueboard/66/rev1/config.h index 6b61ca4d140..b8c5759db6b 100644 --- a/keyboards/clueboard/66/rev1/config.h +++ b/keyboards/clueboard/66/rev1/config.h @@ -1,62 +1,3 @@ #pragma once #include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2301 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard -#define DESCRIPTION QMK keyboard firmware for Clueboard - -/* key matrix size - */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* ROWS: Top to bottom, COLS: Left to right - */ -#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } -#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define LED_CAPS_LOCK_PIN F0 - -/* Underlight configuration - */ -#define RGB_DI_PIN B2 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/clueboard/66/rev1/info.json b/keyboards/clueboard/66/rev1/info.json new file mode 100644 index 00000000000..f67e5baf75e --- /dev/null +++ b/keyboards/clueboard/66/rev1/info.json @@ -0,0 +1,273 @@ +{ + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66%", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bluetooth": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": false, + "unicode": false + }, + "indicators": { + "caps_lock": "F0" + }, + "matrix_pins": { + "cols": ["B3", " F1", " F4", " F5", " F6", " C7", " C6", " B6", " B5", " B4", " D7", " D6", " D4", " F7", " B0", " B1"], + "rows": ["D1", " D0", " D2", " D5", " D3"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "10", + "led_count": "14", + "pin": "B2", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2301", + "vid": "0xC1ED" + }, + "community_layouts": ["66_ansi", "66_iso"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [0, 14], "w": 2, "x": 13, "y": 0 }, + { "label": "k0F", "matrix": [0, 15], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k1F", "matrix": [1, 15], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [2, 13], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 13], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k3E", "matrix": [3, 14], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [4, 10], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Win", "matrix": [4, 11], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k4D", "matrix": [4, 13], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k4E", "matrix": [4, 14], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k4F", "matrix": [4, 15], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_66_iso": { + "key_count": 67, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [0, 14], "w": 2, "x": 13, "y": 0 }, + { "label": "Insert", "matrix": [0, 15], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "Delete", "matrix": [1, 15], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "", "matrix": [2, 12], "w": 1, "x": 12.75, "y": 2 }, + { "h": 2, "label": "Enter", "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Shift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "\\", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [3, 13], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "\u2191", "matrix": [3, 14], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [4, 10], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Ctrl", "matrix": [4, 11], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [4, 12], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "\u2190", "matrix": [4, 13], "w": 1, "x": 13.5, "y": 4 }, + { "label": "\u2193", "matrix": [4, 14], "w": 1, "x": 14.5, "y": 4 }, + { "label": "\u2192", "matrix": [4, 15], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 73, + "layout": [ + { "label": "GRAVE", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "1", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "2", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "4", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "5", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "6", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "7", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "8", "matrix": [0, 8], "w": 1, "x": 8, "y": 0 }, + { "label": "9", "matrix": [0, 9], "w": 1, "x": 9, "y": 0 }, + { "label": "0", "matrix": [0, 10], "w": 1, "x": 10, "y": 0 }, + { "label": "DASH", "matrix": [0, 11], "w": 1, "x": 11, "y": 0 }, + { "label": "EQUALSIGN", "matrix": [0, 12], "w": 1, "x": 12, "y": 0 }, + { "label": "YEN", "matrix": [0, 13], "w": 1, "x": 13, "y": 0 }, + { "label": "BACKSPACE", "matrix": [0, 14], "w": 1, "x": 14, "y": 0 }, + { "label": "PAGEUP", "matrix": [0, 15], "w": 1, "x": 15.5, "y": 0 }, + { "label": "TAB", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [1, 8], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [1, 9], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [1, 10], "w": 1, "x": 10.5, "y": 1 }, + { "label": "LBRACKET", "matrix": [1, 11], "w": 1, "x": 11.5, "y": 1 }, + { "label": "RBRACKET", "matrix": [1, 12], "w": 1, "x": 12.5, "y": 1 }, + { "label": "BACKSLASH", "matrix": [1, 13], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "PAGEDOWN", "matrix": [1, 15], "w": 1, "x": 15.5, "y": 1 }, + { "label": "CAPSLOCK", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [2, 8], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [2, 9], "w": 1, "x": 9.75, "y": 2 }, + { "label": "SEMICOLON", "matrix": [2, 10], "w": 1, "x": 10.75, "y": 2 }, + { "label": "QUOTE", "matrix": [2, 11], "w": 1, "x": 11.75, "y": 2 }, + { "label": "ISOHASH", "matrix": [2, 12], "w": 1, "x": 12.75, "y": 2 }, + { "label": "ENTER", "matrix": [2, 13], "w": 1.25, "x": 13.75, "y": 2 }, + { "label": "LSHIFT", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISOBACKSLASH", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [3, 8], "w": 1, "x": 8.25, "y": 3 }, + { "label": "COMMA", "matrix": [3, 9], "w": 1, "x": 9.25, "y": 3 }, + { "label": "PERIOD", "matrix": [3, 10], "w": 1, "x": 10.25, "y": 3 }, + { "label": "SLASH", "matrix": [3, 11], "w": 1, "x": 11.25, "y": 3 }, + { "label": "JPBACKSLASH", "matrix": [3, 12], "w": 1, "x": 12.25, "y": 3 }, + { "label": "RSHIFT", "matrix": [3, 13], "w": 1.25, "x": 13.25, "y": 3 }, + { "label": "UP", "matrix": [3, 14], "w": 1, "x": 14.5, "y": 3 }, + { "label": "LCTRL", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "LALT", "matrix": [4, 1], "w": 1, "x": 1.25, "y": 4 }, + { "label": "LCMD", "matrix": [4, 2], "w": 1.25, "x": 2.25, "y": 4 }, + { "label": "MUHENKAN", "matrix": [4, 3], "w": 1.25, "x": 3.5, "y": 4 }, + { "label": "SPACE1", "matrix": [4, 5], "w": 2, "x": 4.75, "y": 4 }, + { "label": "SPACE2", "matrix": [4, 6], "w": 2, "x": 6.75, "y": 4 }, + { "label": "HENKAN", "matrix": [4, 9], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "RCMD", "matrix": [4, 10], "w": 1.25, "x": 10, "y": 4 }, + { "label": "RCTRL", "matrix": [4, 11], "w": 1, "x": 11.25, "y": 4 }, + { "label": "FN", "matrix": [4, 12], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "LEFT", "matrix": [4, 13], "w": 1, "x": 13.5, "y": 4 }, + { "label": "DOWN", "matrix": [4, 14], "w": 1, "x": 14.5, "y": 4 }, + { "label": "RIGHT", "matrix": [4, 15], "w": 1, "x": 15.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/clueboard/66/rev1/readme.md b/keyboards/clueboard/66/rev1/readme.md new file mode 100644 index 00000000000..ba6013128a1 --- /dev/null +++ b/keyboards/clueboard/66/rev1/readme.md @@ -0,0 +1,15 @@ +# Clueboard 66% + +![Clueboard](https://i.imgur.com/hLePwJu.jpg) + +A fully customizable 66% keyboard. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% PCB rev1 (atmega32u4) +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make clueboard/66/rev1:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/66/rev1/rev1.h b/keyboards/clueboard/66/rev1/rev1.h index e071f4c7968..ef5b3f3e04d 100644 --- a/keyboards/clueboard/66/rev1/rev1.h +++ b/keyboards/clueboard/66/rev1/rev1.h @@ -1,75 +1,3 @@ #pragma once #include "quantum.h" - -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| | 0F| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| | 1F| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C| 2D| - * |------------------------------------------------------------. - * | 30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C| 3D|3E| - * |------------------------------------------------------------------. - * | 40| 41| 42| 43| 45| 46| 49| 4A| 4B| 4C| 4D| 4E| 4F| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| - * |--------------------------------------------------------------. - * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ - k40, k41, k42, k43, k45, k46, k49, k4A, k4B, k4C, k4D, k4E, k4F \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ - { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E, k4F } \ -} - -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, k3E, \ - k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E, k4F \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, k3E }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E, k4F } \ -} - -#define LAYOUT_66_iso( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1F, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, k3E, \ - k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E, k4F \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, KC_NO, KC_NO, k1F }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, k3E }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E, k4F } \ -} - -#define KEYMAP LAYOUT_all -#define LAYOUT LAYOUT_all diff --git a/keyboards/clueboard/66/rev1/rules.mk b/keyboards/clueboard/66/rev1/rules.mk index 84b5dee21e7..2f20507d4dd 100644 --- a/keyboards/clueboard/66/rev1/rules.mk +++ b/keyboards/clueboard/66/rev1/rules.mk @@ -10,21 +10,3 @@ MCU = atmega32u4 # ATmega32A bootloadHID # ATmega328P USBasp BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66/rev2/config.h b/keyboards/clueboard/66/rev2/config.h index a1e4804cad0..e226d71ea04 100644 --- a/keyboards/clueboard/66/rev2/config.h +++ b/keyboards/clueboard/66/rev2/config.h @@ -2,68 +2,12 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2320 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard -#define DESCRIPTION QMK keyboard firmware for Clueboard - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* ROWS: Top to bottom, COLS: Left to right -*/ -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define LED_CAPS_LOCK_PIN B4 - /* Backlight configuration */ #define BACKLIGHT_LEVELS 1 /* Underlight configuration */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 14 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_BREATHE_CENTER 1 #define RGBLIGHT_EFFECT_BREATHE_MAX 200 #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 diff --git a/keyboards/clueboard/66/rev2/info.json b/keyboards/clueboard/66/rev2/info.json new file mode 100644 index 00000000000..4560ec7e8d0 --- /dev/null +++ b/keyboards/clueboard/66/rev2/info.json @@ -0,0 +1,273 @@ +{ + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66%", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": true, + "bluetooth": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "indicators": { + "caps_lock": "B4" + }, + "matrix_pins": { + "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], + "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "32", + "led_count": "14", + "pin": "D7", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2320", + "vid": "0xC1ED" + }, + "community_layouts": ["66_ansi", "66_iso"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Win", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_66_iso": { + "key_count": 67, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "Insert", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "Delete", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "h": 2, "label": "Enter", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Shift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "\\", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "\u2191", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Ctrl", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "\u2190", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "\u2193", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "\u2192", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 73, + "layout": [ + { "label": "GRAVE", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "1", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "2", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "4", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "5", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "6", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "7", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "8", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "9", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "0", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "DASH", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "EQUALSIGN", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "YEN", "matrix": [5, 5], "w": 1, "x": 13, "y": 0 }, + { "label": "BACKSPACE", "matrix": [5, 6], "w": 1, "x": 14, "y": 0 }, + { "label": "PAGEUP", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "TAB", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "LBRACKET", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "RBRACKET", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "BACKSLASH", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "PAGEDOWN", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "CAPSLOCK", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "SEMICOLON", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "QUOTE", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "ISOHASH", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "label": "ENTER", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 2 }, + { "label": "LSHIFT", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISOBACKSLASH", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "COMMA", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "PERIOD", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "SLASH", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "JPBACKSLASH", "matrix": [8, 4], "w": 1, "x": 12.25, "y": 3 }, + { "label": "RSHIFT", "matrix": [8, 5], "w": 1.25, "x": 13.25, "y": 3 }, + { "label": "UP", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "LCTRL", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "LALT", "matrix": [4, 1], "w": 1, "x": 1.25, "y": 4 }, + { "label": "LCMD", "matrix": [4, 2], "w": 1.25, "x": 2.25, "y": 4 }, + { "label": "MUHENKAN", "matrix": [4, 3], "w": 1.25, "x": 3.5, "y": 4 }, + { "label": "SPACE1", "matrix": [4, 5], "w": 2, "x": 4.75, "y": 4 }, + { "label": "SPACE2", "matrix": [4, 6], "w": 2, "x": 6.75, "y": 4 }, + { "label": "HENKAN", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "RCMD", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "RCTRL", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "FN", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "LEFT", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "DOWN", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "RIGHT", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/clueboard/66/rev2/readme.md b/keyboards/clueboard/66/rev2/readme.md new file mode 100644 index 00000000000..9943ec6951d --- /dev/null +++ b/keyboards/clueboard/66/rev2/readme.md @@ -0,0 +1,15 @@ +# Clueboard 66% + +![Clueboard](https://i.imgur.com/hLePwJu.jpg) + +A fully customizable 66% keyboard. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% PCB rev2 (atmega32u4) +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make clueboard/66/rev2:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/66/rev2/rev2.h b/keyboards/clueboard/66/rev2/rev2.h index 86688c7a155..00bdf1e032f 100644 --- a/keyboards/clueboard/66/rev2/rev2.h +++ b/keyboards/clueboard/66/rev2/rev2.h @@ -2,93 +2,3 @@ #include "quantum.h" -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| - * |------------------------------------------------------------. - * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| - * |--------------------------------------------------------------. - * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ - k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_ansi, standard 66 key ANSI layout - */ -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_iso, standard 67 key ISO layout - */ -#define LAYOUT_66_iso( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, KC_NO, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define KEYMAP LAYOUT_all -#define LAYOUT LAYOUT_all diff --git a/keyboards/clueboard/66/rev2/rules.mk b/keyboards/clueboard/66/rev2/rules.mk index 16d9251d6aa..75fb718e33d 100644 --- a/keyboards/clueboard/66/rev2/rules.mk +++ b/keyboards/clueboard/66/rev2/rules.mk @@ -12,18 +12,4 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = custom -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66/rev3/config.h b/keyboards/clueboard/66/rev3/config.h index 2d063d4e61c..6ba11f512a2 100644 --- a/keyboards/clueboard/66/rev3/config.h +++ b/keyboards/clueboard/66/rev3/config.h @@ -2,68 +2,10 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2370 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard -#define DESCRIPTION QMK keyboard firmware for Clueboard - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* ROWS: Top to bottom, COLS: Left to right -*/ -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define LED_CAPS_LOCK_PIN B4 - /* Backlight configuration */ #define BACKLIGHT_LEVELS 1 -/* Underlight configuration - */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 18 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_BREATHE_CENTER 1 #define RGBLIGHT_EFFECT_BREATHE_MAX 200 #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 diff --git a/keyboards/clueboard/66/rev3/info.json b/keyboards/clueboard/66/rev3/info.json new file mode 100644 index 00000000000..4b9694a2bfb --- /dev/null +++ b/keyboards/clueboard/66/rev3/info.json @@ -0,0 +1,273 @@ +{ + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66% rev3", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": true, + "bluetooth": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "indicators": { + "caps_lock": "B4" + }, + "matrix_pins": { + "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], + "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "32", + "led_count": "18", + "pin": "D7", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2370", + "vid": "0xC1ED" + }, + "community_layouts": ["66_ansi", "66_iso"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Win", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_66_iso": { + "key_count": 67, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "Insert", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "Delete", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "h": 2, "label": "Enter", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Shift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "\\", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "\u2191", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Ctrl", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "\u2190", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "\u2193", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "\u2192", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 73, + "layout": [ + { "label": "GRAVE", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "1", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "2", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "4", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "5", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "6", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "7", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "8", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "9", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "0", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "DASH", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "EQUALSIGN", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "YEN", "matrix": [5, 5], "w": 1, "x": 13, "y": 0 }, + { "label": "BACKSPACE", "matrix": [5, 6], "w": 1, "x": 14, "y": 0 }, + { "label": "PAGEUP", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "TAB", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "LBRACKET", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "RBRACKET", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "BACKSLASH", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "PAGEDOWN", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "CAPSLOCK", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "SEMICOLON", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "QUOTE", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "ISOHASH", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "label": "ENTER", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 2 }, + { "label": "LSHIFT", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISOBACKSLASH", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "COMMA", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "PERIOD", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "SLASH", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "JPBACKSLASH", "matrix": [8, 4], "w": 1, "x": 12.25, "y": 3 }, + { "label": "RSHIFT", "matrix": [8, 5], "w": 1.25, "x": 13.25, "y": 3 }, + { "label": "UP", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "LCTRL", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "LALT", "matrix": [4, 1], "w": 1, "x": 1.25, "y": 4 }, + { "label": "LCMD", "matrix": [4, 2], "w": 1.25, "x": 2.25, "y": 4 }, + { "label": "MUHENKAN", "matrix": [4, 3], "w": 1.25, "x": 3.5, "y": 4 }, + { "label": "SPACE1", "matrix": [4, 5], "w": 2, "x": 4.75, "y": 4 }, + { "label": "SPACE2", "matrix": [4, 6], "w": 2, "x": 6.75, "y": 4 }, + { "label": "HENKAN", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "RCMD", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "RCTRL", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "FN", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "LEFT", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "DOWN", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "RIGHT", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/clueboard/66/rev3/readme.md b/keyboards/clueboard/66/rev3/readme.md new file mode 100644 index 00000000000..5d7ecd41c22 --- /dev/null +++ b/keyboards/clueboard/66/rev3/readme.md @@ -0,0 +1,15 @@ +# Clueboard 66% + +![Clueboard](https://i.imgur.com/hLePwJu.jpg) + +A fully customizable 66% keyboard. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% PCB rev3 (atmega32u4) +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make clueboard/66/rev3:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/66/rev3/rev3.h b/keyboards/clueboard/66/rev3/rev3.h index 86688c7a155..00bdf1e032f 100644 --- a/keyboards/clueboard/66/rev3/rev3.h +++ b/keyboards/clueboard/66/rev3/rev3.h @@ -2,93 +2,3 @@ #include "quantum.h" -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| - * |------------------------------------------------------------. - * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| - * |--------------------------------------------------------------. - * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ - k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_ansi, standard 66 key ANSI layout - */ -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_iso, standard 67 key ISO layout - */ -#define LAYOUT_66_iso( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, KC_NO, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define KEYMAP LAYOUT_all -#define LAYOUT LAYOUT_all diff --git a/keyboards/clueboard/66/rev3/rules.mk b/keyboards/clueboard/66/rev3/rules.mk index 55f3050e357..76e161e36b2 100644 --- a/keyboards/clueboard/66/rev3/rules.mk +++ b/keyboards/clueboard/66/rev3/rules.mk @@ -14,18 +14,4 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = custom -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66/rev4/config.h b/keyboards/clueboard/66/rev4/config.h index 8ed14047837..c745b5a1101 100644 --- a/keyboards/clueboard/66/rev4/config.h +++ b/keyboards/clueboard/66/rev4/config.h @@ -2,72 +2,18 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2390 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard 66% rev4 -#define DESCRIPTION QMK keyboard firmware for Clueboard - /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up here: * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf */ #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* ROWS: Top to bottom, COLS: Left to right -*/ -#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B7, B6, C15, C14, C13 } -#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B5 } -#define UNUSED_PINS { B15, B14, B13, B12, B9, B8, A15, A10, A9, A8 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - /* Backlight configuration */ #define BACKLIGHT_LEVELS 1 /* Underlight configuration */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 18 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_BREATHE_CENTER 1 #define RGBLIGHT_EFFECT_BREATHE_MAX 200 #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 diff --git a/keyboards/clueboard/66/rev4/info.json b/keyboards/clueboard/66/rev4/info.json new file mode 100644 index 00000000000..90c721e31fc --- /dev/null +++ b/keyboards/clueboard/66/rev4/info.json @@ -0,0 +1,270 @@ +{ + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66% rev4", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": true, + "backlight": false, + "bluetooth": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": false, + "unicode": false + }, + "matrix_pins": { + "cols": ["B10", " B2", " B1", " B0", " A7", " B4", " B3", " B5"], + "rows": ["B11", " A6", " A3", " A2", " A1", " B7", " B6", " C15", " C14", " C13"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "32", + "led_count": "18", + "pin": "D7", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2390", + "vid": "0xC1ED" + }, + "community_layouts": ["66_ansi", "66_iso"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "Page Up", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "|", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Page Down", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "Enter", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "Up", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "Space", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Win", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "Left", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "Down", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "Up", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_66_iso": { + "key_count": 67, + "layout": [ + { "label": "~", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "!", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "@", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "#", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "$", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "%", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "^", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "&", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "*", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "(", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": ")", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "_", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "+", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "Backspace", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "Insert", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "Tab", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "{", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "}", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "Delete", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "Caps Lock", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": ":", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "\"", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "h": 2, "label": "Enter", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Shift", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "\\", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "<", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": ">", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "?", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "Shift", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "\u2191", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "Ctrl", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "Space", "matrix": [4, 6], "w": 6, "x": 3.75, "y": 4 }, + { "label": "Alt", "matrix": [9, 2], "w": 1.25, "x": 9.75, "y": 4 }, + { "label": "Ctrl", "matrix": [9, 3], "w": 1.25, "x": 11, "y": 4 }, + { "label": "Menu", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "\u2190", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "\u2193", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "\u2192", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 73, + "layout": [ + { "label": "GRAVE", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "1", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "2", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "3", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "4", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "5", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "6", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "7", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "8", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "9", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "0", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "DASH", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "EQUALSIGN", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "YEN", "matrix": [5, 5], "w": 1, "x": 13, "y": 0 }, + { "label": "BACKSPACE", "matrix": [5, 6], "w": 1, "x": 14, "y": 0 }, + { "label": "PAGEUP", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "TAB", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "W", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "E", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "R", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "T", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "Y", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "U", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "I", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "O", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "P", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "LBRACKET", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "RBRACKET", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "BACKSLASH", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "PAGEDOWN", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "CAPSLOCK", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "S", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "D", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "F", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "G", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "H", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "J", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "K", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "L", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "SEMICOLON", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "QUOTE", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "ISOHASH", "matrix": [7, 4], "w": 1, "x": 12.75, "y": 2 }, + { "label": "ENTER", "matrix": [7, 5], "w": 1.25, "x": 13.75, "y": 2 }, + { "label": "LSHIFT", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISOBACKSLASH", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "Z", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "X", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "C", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "V", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "B", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "N", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "M", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "COMMA", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "PERIOD", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "SLASH", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "JPBACKSLASH", "matrix": [8, 4], "w": 1, "x": 12.25, "y": 3 }, + { "label": "RSHIFT", "matrix": [8, 5], "w": 1.25, "x": 13.25, "y": 3 }, + { "label": "UP", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "LCTRL", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "LALT", "matrix": [4, 1], "w": 1, "x": 1.25, "y": 4 }, + { "label": "LCMD", "matrix": [4, 2], "w": 1.25, "x": 2.25, "y": 4 }, + { "label": "MUHENKAN", "matrix": [4, 3], "w": 1.25, "x": 3.5, "y": 4 }, + { "label": "SPACE1", "matrix": [4, 5], "w": 2, "x": 4.75, "y": 4 }, + { "label": "SPACE2", "matrix": [4, 6], "w": 2, "x": 6.75, "y": 4 }, + { "label": "HENKAN", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "RCMD", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "RCTRL", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "FN", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "LEFT", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "DOWN", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "RIGHT", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/clueboard/66/rev4/keymaps/keymap.c b/keyboards/clueboard/66/rev4/keymaps/keymap.c new file mode 100644 index 00000000000..df145eb4885 --- /dev/null +++ b/keyboards/clueboard/66/rev4/keymaps/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +/* THIS FILE WAS GENERATED! + * + * This file was generated by qmk json2c. You may or may not want to + * edit it directly. + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [1] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_HOME, KC_PGDN, KC_END), + [2] = LAYOUT(BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI) +}; diff --git a/keyboards/clueboard/66/rev4/keymaps/mine/keymap.c b/keyboards/clueboard/66/rev4/keymaps/mine/keymap.c new file mode 100644 index 00000000000..df145eb4885 --- /dev/null +++ b/keyboards/clueboard/66/rev4/keymaps/mine/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +/* THIS FILE WAS GENERATED! + * + * This file was generated by qmk json2c. You may or may not want to + * edit it directly. + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [1] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_HOME, KC_PGDN, KC_END), + [2] = LAYOUT(BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI) +}; diff --git a/keyboards/clueboard/66/rev4/mine/keymap.c b/keyboards/clueboard/66/rev4/mine/keymap.c new file mode 100644 index 00000000000..df145eb4885 --- /dev/null +++ b/keyboards/clueboard/66/rev4/mine/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +/* THIS FILE WAS GENERATED! + * + * This file was generated by qmk json2c. You may or may not want to + * edit it directly. + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [1] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_HOME, KC_PGDN, KC_END), + [2] = LAYOUT(BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI) +}; diff --git a/keyboards/clueboard/66/rev4/rev4.h b/keyboards/clueboard/66/rev4/rev4.h index 86688c7a155..ef5b3f3e04d 100644 --- a/keyboards/clueboard/66/rev4/rev4.h +++ b/keyboards/clueboard/66/rev4/rev4.h @@ -1,94 +1,3 @@ #pragma once #include "quantum.h" - -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56| | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| - * |------------------------------------------------------------. - * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| - * |--------------------------------------------------------------. - * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ - k40, k41, k42, k43, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_ansi, standard 66 key ANSI layout - */ -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -/* LAYOUT_66_iso, standard 67 key ISO layout - */ -#define LAYOUT_66_iso( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, KC_NO, KC_NO, k67 }, \ - { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define KEYMAP LAYOUT_all -#define LAYOUT LAYOUT_all diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk index f6120c929ff..4e157baeda1 100644 --- a/keyboards/clueboard/66/rev4/rules.mk +++ b/keyboards/clueboard/66/rev4/rules.mk @@ -1,22 +1,3 @@ # MCU name MCU = STM32F303 BOARD = QMK_PROTON_C - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE = no -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes - -LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h index b25686fa17d..9b1dba3dc33 100644 --- a/keyboards/clueboard/66_hotswap/config.h +++ b/keyboards/clueboard/66_hotswap/config.h @@ -18,32 +18,9 @@ along with this program. If not, see . #pragma once #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define MANUFACTURER Clueboard -#define PRODUCT Clueboard 66% HotSwap -#define DESCRIPTION QMK keyboard firmware for Clueboard 66% - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - /* * Feature disable options * These options are also useful to firmware size reduction. */ - -//#define NO_DEBUG -//#define NO_PRINT -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING #define NO_ACTION_ONESHOT #define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h index 7c90d05b381..98d97288707 100644 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ b/keyboards/clueboard/66_hotswap/gen1/config.h @@ -18,37 +18,12 @@ #pragma once #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2391 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard - /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up here: * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf */ #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 } -#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 } -#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 } -#define DIODE_DIRECTION COL2ROW - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ // #define DEBOUNCE 6 diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.h b/keyboards/clueboard/66_hotswap/gen1/gen1.h index 05adf49831e..98f9ba1424d 100644 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.h +++ b/keyboards/clueboard/66_hotswap/gen1/gen1.h @@ -16,74 +16,3 @@ #pragma once #include "quantum.h" -/* - * These are shortcuts to help you work with the various layout options. If your - * keymap works with one of the LAYOUT_...() macros you are encouraged to use that - * and to contribute your keymap to the corresponding layout in - * `qmk_firmware/layouts/community`. - */ - -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75| - * |--------------------------------------------------------------. - * | 30 | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85 |86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95|96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | - * |--------------------------------------------------------------. - * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json index 76c2b44208c..76352b0771c 100644 --- a/keyboards/clueboard/66_hotswap/gen1/info.json +++ b/keyboards/clueboard/66_hotswap/gen1/info.json @@ -1,165 +1,178 @@ { - "keyboard_name": "Clueboard 66% HotSwap Gen1", - "maintainer": "skullydazed", - "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0, "w": 2}, - - {"x": 15.5, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 15.5, "y": 1}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 2.25}, - - {"x": 14.5, "y": 3}, - - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 2.75}, - {"x": 6.5, "y": 4, "w": 2.25}, - {"x": 8.75, "y": 4, "w": 1.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4}, - {"x": 12.25, "y": 4, "w": 1.25}, - {"x": 13.5, "y": 4}, - {"x": 14.5, "y": 4}, - {"x": 15.5, "y": 4} - ] - }, - "LAYOUT_66_ansi": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0, "w": 2}, - - {"x": 15.5, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 15.5, "y": 1}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 2.25}, - - {"x": 14.5, "y": 3}, - - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 6.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4}, - {"x": 12.25, "y": 4, "w": 1.25}, - - {"x": 13.5, "y": 4}, - {"x": 14.5, "y": 4}, - {"x": 15.5, "y": 4} - ] - } + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66% HotSwap Gen1", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": true, + "bootmagic": true, + "command": true, + "console": true, + "extrakey": true, + "led_matrix": "IS31FL3731", + "mousekey": true, + "nkro": true + }, + "matrix_pins": { + "cols": ["B10", " B2", " B1", " B0", " A7", " B4", " B3", " B7"], + "rows": ["B11", " A6", " A3", " A2", " A1", " B5", " B6", " C15", " C14", " C13"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2391", + "vid": "0xC1ED" + }, + "community_layouts": [], + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "k55", "matrix": [5, 5], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "k30", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "k85", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 68, + "layout": [ + { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "k55", "matrix": [5, 5], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "k30", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "k85", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k45", "matrix": [4, 5], "w": 2.75, "x": 3.75, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 2.25, "x": 6.5, "y": 4 }, + { "label": "k90", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] } + } } diff --git a/keyboards/clueboard/66_hotswap/gen1/readme.md b/keyboards/clueboard/66_hotswap/gen1/readme.md new file mode 100644 index 00000000000..036df01c644 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/readme.md @@ -0,0 +1,16 @@ +# Clueboard 66% HotSwap + +![Clueboard](https://i.imgur.com/8UmBoNx.jpg) + +A fully customizable 66% keyboard with Hot Swap sockets. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% HotSwap PCB + * 2.9 (gen1) +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make clueboard/66_hotswap/gen1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index 18e01fcd195..7e85acec655 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -2,21 +2,5 @@ MCU = STM32F303 BOARD = QMK_PROTON_C -# LED Configuration -LED_MATRIX_ENABLE = yes -LED_MATRIX_DRIVER = IS31FL3731 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = yes -# SERIAL_LINK_ENABLE = yes - -LAYOUTS = 66_ansi +# project specific files +SRC = led.c diff --git a/keyboards/clueboard/66_hotswap/prototype/config.h b/keyboards/clueboard/66_hotswap/prototype/config.h index f6ab6ba5355..5c22b927adc 100644 --- a/keyboards/clueboard/66_hotswap/prototype/config.h +++ b/keyboards/clueboard/66_hotswap/prototype/config.h @@ -1,27 +1,6 @@ #pragma once #include "config_common.h" -#define PRODUCT_ID 0x2390 -#define DEVICE_VER 0x0001 - -/* key matrix size */ -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -// ROWS: Top to bottom, COLS: Left to right -/* Row pin configuration -* row: 0 1 2 3 4 5 6 7 8 9 -* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 -*/ - -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -/* Column pin configuration - * col: 0 1 2 3 4 5 6 7 - * pin: F0 F1 F4 F5 F6 F7 E6 B1 - */ -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS - /* Speaker configuration */ #define B7_AUDIO @@ -32,21 +11,12 @@ */ #define NO_ACTION_TAPPING -#define LED_CAPS_LOCK_PIN B4 - /* Backlight configuration */ #define BACKLIGHT_LEVELS 1 /* Underlight configuration */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 26 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_BREATHE_CENTER 1 #define RGBLIGHT_EFFECT_BREATHE_MAX 200 #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 diff --git a/keyboards/clueboard/66_hotswap/prototype/info.json b/keyboards/clueboard/66_hotswap/prototype/info.json index 32bd51d0983..1572223592a 100644 --- a/keyboards/clueboard/66_hotswap/prototype/info.json +++ b/keyboards/clueboard/66_hotswap/prototype/info.json @@ -1,245 +1,198 @@ { - "keyboard_name": "Clueboard 66% HotSwap Prototype", - "maintainer": "skullydazed", - "width": 16.5, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0, "w": 2}, - - {"x": 15.5, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 15.5, "y": 1}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 1.25}, - {"x": 1.25, "y": 3}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3}, - {"x": 13.25, "y": 3, "w": 1.25}, - {"x": 14.5, "y": 3}, - - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 2.75}, - {"x": 6.5, "y": 4, "w": 2.25}, - {"x": 8.75, "y": 4, "w": 1.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4}, - {"x": 12.25, "y": 4, "w": 1.25}, - {"x": 13.5, "y": 4}, - {"x": 14.5, "y": 4}, - {"x": 15.5, "y": 4} - ] - }, - "LAYOUT": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0, "w": 2}, - - {"x": 15.5, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 15.5, "y": 1}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 2.25}, - - {"x": 14.5, "y": 3}, - - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 2.75}, - {"x": 6.5, "y": 4, "w": 2.25}, - {"x": 8.75, "y": 4, "w": 1.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4}, - {"x": 12.25, "y": 4, "w": 1.25}, - {"x": 13.5, "y": 4}, - {"x": 14.5, "y": 4}, - {"x": 15.5, "y": 4} - ] - }, - "LAYOUT_66_ansi": { - "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0, "w": 2}, - - {"x": 15.5, "y": 0}, - - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - - {"x": 15.5, "y": 1}, - - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 2.25}, - - {"x": 14.5, "y": 3}, - - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 6.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4}, - {"x": 12.25, "y": 4, "w": 1.25}, - - {"x": 13.5, "y": 4}, - {"x": 14.5, "y": 4}, - {"x": 15.5, "y": 4} - ] - } + "manufacturer": "Clueboard", + "keyboard_name": "Clueboard 66% HotSwap Prototype", + "maintainer": "skullydazed", + "height": 5, + "width": 16.5, + "debounce": "5", + "diode_direction": "COL2ROW", + "features": { + "audio": true, + "backlight": true, + "bluetooth": false, + "bootmagic": false, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": false, + "nkro": true, + "rgblight": true, + "unicode": false + }, + "indicators": { + "caps_lock": "B4" + }, + "matrix_pins": { + "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], + "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + }, + "rgblight": { + "animations": { + "all": true + }, + "brightness_steps": "17", + "hue_steps": "32", + "led_count": "26", + "pin": "D7", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2390", + "vid": "0xC1ED" + }, + "community_layouts": ["66_ansi"], + "layout_aliases": { + "KEYMAP": "LAYOUT_all", + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_66_ansi": { + "key_count": 66, + "layout": [ + { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "k56", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "k30", "matrix": [3, 0], "w": 2.25, "x": 0, "y": 3 }, + { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "k85", "matrix": [8, 5], "w": 2.25, "x": 12.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] + }, + "LAYOUT_all": { + "key_count": 70, + "layout": [ + { "label": "k00", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "k01", "matrix": [0, 1], "w": 1, "x": 1, "y": 0 }, + { "label": "k02", "matrix": [0, 2], "w": 1, "x": 2, "y": 0 }, + { "label": "k03", "matrix": [0, 3], "w": 1, "x": 3, "y": 0 }, + { "label": "k04", "matrix": [0, 4], "w": 1, "x": 4, "y": 0 }, + { "label": "k05", "matrix": [0, 5], "w": 1, "x": 5, "y": 0 }, + { "label": "k06", "matrix": [0, 6], "w": 1, "x": 6, "y": 0 }, + { "label": "k07", "matrix": [0, 7], "w": 1, "x": 7, "y": 0 }, + { "label": "k50", "matrix": [5, 0], "w": 1, "x": 8, "y": 0 }, + { "label": "k51", "matrix": [5, 1], "w": 1, "x": 9, "y": 0 }, + { "label": "k52", "matrix": [5, 2], "w": 1, "x": 10, "y": 0 }, + { "label": "k53", "matrix": [5, 3], "w": 1, "x": 11, "y": 0 }, + { "label": "k54", "matrix": [5, 4], "w": 1, "x": 12, "y": 0 }, + { "label": "k56", "matrix": [5, 6], "w": 2, "x": 13, "y": 0 }, + { "label": "k57", "matrix": [5, 7], "w": 1, "x": 15.5, "y": 0 }, + { "label": "k10", "matrix": [1, 0], "w": 1.5, "x": 0, "y": 1 }, + { "label": "k11", "matrix": [1, 1], "w": 1, "x": 1.5, "y": 1 }, + { "label": "k12", "matrix": [1, 2], "w": 1, "x": 2.5, "y": 1 }, + { "label": "k13", "matrix": [1, 3], "w": 1, "x": 3.5, "y": 1 }, + { "label": "k14", "matrix": [1, 4], "w": 1, "x": 4.5, "y": 1 }, + { "label": "k15", "matrix": [1, 5], "w": 1, "x": 5.5, "y": 1 }, + { "label": "k16", "matrix": [1, 6], "w": 1, "x": 6.5, "y": 1 }, + { "label": "k17", "matrix": [1, 7], "w": 1, "x": 7.5, "y": 1 }, + { "label": "k60", "matrix": [6, 0], "w": 1, "x": 8.5, "y": 1 }, + { "label": "k61", "matrix": [6, 1], "w": 1, "x": 9.5, "y": 1 }, + { "label": "k62", "matrix": [6, 2], "w": 1, "x": 10.5, "y": 1 }, + { "label": "k63", "matrix": [6, 3], "w": 1, "x": 11.5, "y": 1 }, + { "label": "k64", "matrix": [6, 4], "w": 1, "x": 12.5, "y": 1 }, + { "label": "k65", "matrix": [6, 5], "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "k67", "matrix": [6, 7], "w": 1, "x": 15.5, "y": 1 }, + { "label": "k20", "matrix": [2, 0], "w": 1.75, "x": 0, "y": 2 }, + { "label": "k21", "matrix": [2, 1], "w": 1, "x": 1.75, "y": 2 }, + { "label": "k22", "matrix": [2, 2], "w": 1, "x": 2.75, "y": 2 }, + { "label": "k23", "matrix": [2, 3], "w": 1, "x": 3.75, "y": 2 }, + { "label": "k24", "matrix": [2, 4], "w": 1, "x": 4.75, "y": 2 }, + { "label": "k25", "matrix": [2, 5], "w": 1, "x": 5.75, "y": 2 }, + { "label": "k26", "matrix": [2, 6], "w": 1, "x": 6.75, "y": 2 }, + { "label": "k27", "matrix": [2, 7], "w": 1, "x": 7.75, "y": 2 }, + { "label": "k70", "matrix": [7, 0], "w": 1, "x": 8.75, "y": 2 }, + { "label": "k71", "matrix": [7, 1], "w": 1, "x": 9.75, "y": 2 }, + { "label": "k72", "matrix": [7, 2], "w": 1, "x": 10.75, "y": 2 }, + { "label": "k73", "matrix": [7, 3], "w": 1, "x": 11.75, "y": 2 }, + { "label": "k75", "matrix": [7, 5], "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "k30", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "k31", "matrix": [3, 1], "w": 1, "x": 1.25, "y": 3 }, + { "label": "k32", "matrix": [3, 2], "w": 1, "x": 2.25, "y": 3 }, + { "label": "k33", "matrix": [3, 3], "w": 1, "x": 3.25, "y": 3 }, + { "label": "k34", "matrix": [3, 4], "w": 1, "x": 4.25, "y": 3 }, + { "label": "k35", "matrix": [3, 5], "w": 1, "x": 5.25, "y": 3 }, + { "label": "k36", "matrix": [3, 6], "w": 1, "x": 6.25, "y": 3 }, + { "label": "k37", "matrix": [3, 7], "w": 1, "x": 7.25, "y": 3 }, + { "label": "k80", "matrix": [8, 0], "w": 1, "x": 8.25, "y": 3 }, + { "label": "k81", "matrix": [8, 1], "w": 1, "x": 9.25, "y": 3 }, + { "label": "k82", "matrix": [8, 2], "w": 1, "x": 10.25, "y": 3 }, + { "label": "k83", "matrix": [8, 3], "w": 1, "x": 11.25, "y": 3 }, + { "label": "k84", "matrix": [8, 4], "w": 1, "x": 12.25, "y": 3 }, + { "label": "k85", "matrix": [8, 5], "w": 1.25, "x": 13.25, "y": 3 }, + { "label": "k86", "matrix": [8, 6], "w": 1, "x": 14.5, "y": 3 }, + { "label": "k40", "matrix": [4, 0], "w": 1.25, "x": 0, "y": 4 }, + { "label": "k41", "matrix": [4, 1], "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "k42", "matrix": [4, 2], "w": 1.25, "x": 2.5, "y": 4 }, + { "label": "k45", "matrix": [4, 5], "w": 2.75, "x": 3.75, "y": 4 }, + { "label": "k46", "matrix": [4, 6], "w": 2.25, "x": 6.5, "y": 4 }, + { "label": "k90", "matrix": [9, 0], "w": 1.25, "x": 8.75, "y": 4 }, + { "label": "k92", "matrix": [9, 2], "w": 1.25, "x": 10, "y": 4 }, + { "label": "k93", "matrix": [9, 3], "w": 1, "x": 11.25, "y": 4 }, + { "label": "k94", "matrix": [9, 4], "w": 1.25, "x": 12.25, "y": 4 }, + { "label": "k95", "matrix": [9, 5], "w": 1, "x": 13.5, "y": 4 }, + { "label": "k96", "matrix": [9, 6], "w": 1, "x": 14.5, "y": 4 }, + { "label": "k97", "matrix": [9, 7], "w": 1, "x": 15.5, "y": 4 } + ] } + } } diff --git a/keyboards/clueboard/66_hotswap/prototype/prototype.h b/keyboards/clueboard/66_hotswap/prototype/prototype.h index b1d483b408e..1277cfbbabf 100644 --- a/keyboards/clueboard/66_hotswap/prototype/prototype.h +++ b/keyboards/clueboard/66_hotswap/prototype/prototype.h @@ -1,86 +1,3 @@ #pragma once #include "quantum.h" -/* Clueboard matrix layout - * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57| - * |-----------------------------------------------------------| |---| - * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| - * |-----------------------------------------------------------| `---' - * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| - * |------------------------------------------------------------. - * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| - * |------------------------------------------------------------------. - * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| - * `------------------------------------------------------------------' - * ,-----------------------------------------------------------. ,---. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| - * |-----------------------------------------------------------| |---| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| - * |-----------------------------------------------------------| `---' - * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | - * |--------------------------------------------------------------. - * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| - * |------------------------------------------------------------------. - * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt| - * `------------------------------------------------------------------' - */ -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array - -#define LAYOUT_all( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ - k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} - -#define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ -} diff --git a/keyboards/clueboard/66_hotswap/prototype/readme.md b/keyboards/clueboard/66_hotswap/prototype/readme.md new file mode 100644 index 00000000000..5c76a57144a --- /dev/null +++ b/keyboards/clueboard/66_hotswap/prototype/readme.md @@ -0,0 +1,16 @@ +# Clueboard 66% HotSwap + +![Clueboard](https://i.imgur.com/8UmBoNx.jpg) + +A fully customizable 66% keyboard with Hot Swap sockets. + +* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) +* Hardware Supported: Clueboard 66% HotSwap Prototype PCB + * 2.8 (prototype) +* Hardware Availability: [clueboard.co](https://clueboard.co/) + +Make example for this keyboard (after setting up your build environment): + + make clueboard/66_hotswap/prototype:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/clueboard/66_hotswap/prototype/rules.mk b/keyboards/clueboard/66_hotswap/prototype/rules.mk index 7f5afcf73e4..63dd64f7c18 100644 --- a/keyboards/clueboard/66_hotswap/prototype/rules.mk +++ b/keyboards/clueboard/66_hotswap/prototype/rules.mk @@ -14,19 +14,6 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BACKLIGHT_ENABLE = yes BACKLIGHT_DRIVER = custom -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = no -NKRO_ENABLE = yes -AUDIO_ENABLE = yes -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no -UNICODE_ENABLE = no -BLUETOOTH_ENABLE = no EXTRAFLAGS += -flto -LAYOUTS = 66_ansi diff --git a/keyboards/clueboard/california/california.h b/keyboards/clueboard/california/california.h index 853b360e2ec..ef5b3f3e04d 100644 --- a/keyboards/clueboard/california/california.h +++ b/keyboards/clueboard/california/california.h @@ -1,21 +1,3 @@ #pragma once #include "quantum.h" - -// Any changes to the layout names and/or definitions must also be made to info.json - -#define LAYOUT( \ - K00, K01, \ - K10, K11, \ - K21, \ - K30, K31, \ - K40, K41, \ - K51 \ -) { \ - { K00, K01 }, \ - { K10, K11 }, \ - { KC_NO, K21 }, \ - { K30, K31 }, \ - { K40, K41 }, \ - { KC_NO, K51 } \ -} diff --git a/keyboards/clueboard/california/config.h b/keyboards/clueboard/california/config.h index b1426cea4f2..b8c5759db6b 100644 --- a/keyboards/clueboard/california/config.h +++ b/keyboards/clueboard/california/config.h @@ -1,24 +1,3 @@ #pragma once #include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x23B0 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT California Macropad -#define DESCRIPTION A 10-key macropad shaped like California - -/* key matrix pins */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 2 -#define DIRECT_PINS { \ - { A10, A9 }, \ - { A0, B8 }, \ - { NO_PIN, B11 }, \ - { B9, A8 }, \ - { A7, B1 }, \ - { NO_PIN, B2 } \ -} -#define UNUSED_PINS diff --git a/keyboards/clueboard/california/info.json b/keyboards/clueboard/california/info.json index 2a9ced6e9a5..f376643cdd7 100644 --- a/keyboards/clueboard/california/info.json +++ b/keyboards/clueboard/california/info.json @@ -2,9 +2,31 @@ "keyboard_name": "Clueboard California", "url": "", "maintainer": "skullydazed", + "matrix_pins": { + "direct": [ + ["A10", "A9"], + ["A0", "B8"], + [null, "B11"], + ["B9", "A8"], + ["A7", "B1"], + [null, "B2"] + ] + }, + "usb": {"pid": "0x23B0"}, "layouts": { "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":1, "y":2}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":3.75, "y":5}] + "layout": [ + {"x": 0, "y": 0, "w": 1, "matrix": [0, 0]}, + {"x": 1, "y": 0, "w": 1, "matrix": [0, 1]}, + {"x": 0, "y": 1, "w": 1, "matrix": [1, 0]}, + {"x": 1, "y": 1, "w": 1, "matrix": [1, 1]}, + {"x": 1, "y": 2, "w": 1, "matrix": [2, 1]}, + {"x": 1.25, "y": 3, "w": 1, "matrix": [3, 0]}, + {"x": 2.25, "y": 3, "w": 1, "matrix": [3, 1]}, + {"x": 2, "y": 4, "w": 1, "matrix": [4, 0]}, + {"x": 3, "y": 4, "w": 1, "matrix": [4, 1]}, + {"x": 3.75, "y": 5, "w": 1, "matrix": [5, 1]} + ] } } } diff --git a/keyboards/clueboard/california/keymaps/default/readme.md b/keyboards/clueboard/california/keymaps/default/readme.md new file mode 100644 index 00000000000..f79b015f756 --- /dev/null +++ b/keyboards/clueboard/california/keymaps/default/readme.md @@ -0,0 +1 @@ +Default keymap for the Clueboard California Macropad. diff --git a/keyboards/clueboard/card/card.h b/keyboards/clueboard/card/card.h index a09285eb04f..ef5b3f3e04d 100644 --- a/keyboards/clueboard/card/card.h +++ b/keyboards/clueboard/card/card.h @@ -1,19 +1,3 @@ #pragma once #include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, \ - k10, k12, \ - k20, k21, k22, \ - k11, \ - k30, k31, k32 \ -) { \ - { k00, k01, k02, }, \ - { k10, k11, k12, }, \ - { k20, k21, k22, }, \ - { k30, k31, k32, } \ -} diff --git a/keyboards/clueboard/card/config.h b/keyboards/clueboard/card/config.h index b69ae640ed5..67ddb5e25ca 100644 --- a/keyboards/clueboard/card/config.h +++ b/keyboards/clueboard/card/config.h @@ -19,137 +19,8 @@ along with this program. If not, see . #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xC1ED -#define PRODUCT_ID 0x2330 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Clueboard -#define PRODUCT ATMEGA32U4 Firmware Dev Kit -#define DESCRIPTION A small board to help you hack on QMK. - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 3 - -/* Keyboard Matrix Assignments -*/ -#define MATRIX_ROW_PINS { F0, F5, F4, B4 } -#define MATRIX_COL_PINS { F1, F7, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION ROW2COL - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 20 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - /* number of backlight levels */ #define BACKLIGHT_LEVELS 6 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* Underlight configuration - */ -#define RGB_DI_PIN E6 -//#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 4 // Number of LEDs -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - // Enable audio #define C6_AUDIO diff --git a/keyboards/clueboard/card/info.json b/keyboards/clueboard/card/info.json index 8dfa035996f..e46237175a7 100644 --- a/keyboards/clueboard/card/info.json +++ b/keyboards/clueboard/card/info.json @@ -1,19 +1,61 @@ { + "manufacturer": "Clueboard", "keyboard_name": "Cluecard", - "keyboard_folder": "clueboard/card", - "url": "", "maintainer": "skullydazed", - "width": 10, "height": 8, + "width": 10, + "debounce": "20", + "diode_direction": "ROW2COL", + "features": { + "audio": true, + "backlight": true, + "bluetooth": false, + "bootmagic": false, + "command": true, + "console": true, + "extrakey": true, + "lto": true, + "midi": false, + "mousekey": true, + "nkro": false, + "rgblight": true, + "unicode": false + }, + "matrix_pins": { + "cols": ["F1", " F7", " F6"], + "rows": ["F0", " F5", " F4", " B4"] + }, + "rgblight": { + "brightness_steps": "17", + "hue_steps": "10", + "led_count": "4", + "pin": "E6", + "saturation_steps": "17" + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x2330", + "vid": "0xC1ED" + }, + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { + "LAYOUT_all": { + "key_count": 12, "layout": [ - {"label":"ON/OFF", "x":0, "y":0}, {"label":"SAT+", "x":4, "y":0}, {"label":"BRIGHT+", "x":8, "y":0}, - {"label":"HUE-", "x":2, "y":1}, {"label":"HUE+", "x":6, "y":1}, - {"label":"MODE", "x":0, "y":2}, {"label":"SAT-", "x":4, "y":2}, {"label":"BRIGHT-", "x":8, "y":2}, - {"label":"LAYER", "x":2, "y":4}, - - {"label":"MX1", "x":4, "y":6, "w":2, "h":2}, {"label":"MX2", "x":6, "y":6, "w":2, "h":2}, {"label":"MX3", "x":8, "y":6, "w":2, "h":2} + { "label": "ON/OFF", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 }, + { "label": "SAT+", "matrix": [0, 1], "w": 1, "x": 4, "y": 0 }, + { "label": "BRIGHT+", "matrix": [0, 2], "w": 1, "x": 8, "y": 0 }, + { "label": "HUE-", "matrix": [1, 0], "w": 1, "x": 2, "y": 1 }, + { "label": "HUE+", "matrix": [1, 2], "w": 1, "x": 6, "y": 1 }, + { "label": "MODE", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 }, + { "label": "SAT-", "matrix": [2, 1], "w": 1, "x": 4, "y": 2 }, + { "label": "BRIGHT-", "matrix": [2, 2], "w": 1, "x": 8, "y": 2 }, + { "label": "LAYER", "matrix": [1, 1], "w": 1, "x": 2, "y": 4 }, + { "h": 2, "label": "MX1", "matrix": [3, 0], "w": 2, "x": 4, "y": 6 }, + { "h": 2, "label": "MX2", "matrix": [3, 1], "w": 2, "x": 6, "y": 6 }, + { "h": 2, "label": "MX3", "matrix": [3, 2], "w": 2, "x": 8, "y": 6 } ] } } diff --git a/keyboards/clueboard/card/rules.mk b/keyboards/clueboard/card/rules.mk index a1b003f29c5..75fb718e33d 100644 --- a/keyboards/clueboard/card/rules.mk +++ b/keyboards/clueboard/card/rules.mk @@ -12,18 +12,4 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes # Audio output on port C6 - -LTO_ENABLE = yes diff --git a/keyboards/clueboard/info.json b/keyboards/clueboard/info.json index 52cee1ccb8b..47514f280b1 100644 --- a/keyboards/clueboard/info.json +++ b/keyboards/clueboard/info.json @@ -1,4 +1,8 @@ { "manufacturer": "Clueboard", - "maintainer": "skullydazed" + "maintainer": "skullydazed", + "usb": { + "device_ver": "0x0001", + "vid": "0xC1ED" + } } diff --git a/lib/python/qmk/cli/c2json.py b/lib/python/qmk/cli/c2json.py index 2b3bb774f71..8f9d8dc3830 100644 --- a/lib/python/qmk/cli/c2json.py +++ b/lib/python/qmk/cli/c2json.py @@ -6,6 +6,7 @@ from milc import cli import qmk.keymap import qmk.path +from qmk.info_json_encoder import InfoJSONEncoder @cli.argument('--no-cpp', arg_only=True, action='store_false', help='Do not use \'cpp\' on keymap.c') @@ -47,7 +48,7 @@ def c2json(cli): cli.args.output.parent.mkdir(parents=True, exist_ok=True) if cli.args.output.exists(): cli.args.output.replace(cli.args.output.name + '.bak') - cli.args.output.write_text(json.dumps(keymap_json)) + cli.args.output.write_text(json.dumps(keymap_json, cls=InfoJSONEncoder)) if not cli.args.quiet: cli.log.info('Wrote keymap to %s.', cli.args.output) diff --git a/lib/python/qmk/cli/chibios/confmigrate.py b/lib/python/qmk/cli/chibios/confmigrate.py index eae294a0c69..b9cfda96148 100644 --- a/lib/python/qmk/cli/chibios/confmigrate.py +++ b/lib/python/qmk/cli/chibios/confmigrate.py @@ -13,7 +13,7 @@ def eprint(*args, **kwargs): print(*args, file=sys.stderr, **kwargs) -fileHeader = """\ +file_header = """\ /* Copyright 2020 QMK * * This program is free software: you can redistribute it and/or modify @@ -77,7 +77,7 @@ def check_diffs(input_defs, reference_defs): def migrate_chconf_h(to_override, outfile): - print(fileHeader.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) + print(file_header.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) for override in to_override: print("#define %s %s" % (override[0], override[1]), file=outfile) @@ -87,7 +87,7 @@ def migrate_chconf_h(to_override, outfile): def migrate_halconf_h(to_override, outfile): - print(fileHeader.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) + print(file_header.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) for override in to_override: print("#define %s %s" % (override[0], override[1]), file=outfile) @@ -97,7 +97,7 @@ def migrate_halconf_h(to_override, outfile): def migrate_mcuconf_h(to_override, outfile): - print(fileHeader.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) + print(file_header.format(cli.args.input.relative_to(QMK_FIRMWARE), cli.args.reference.relative_to(QMK_FIRMWARE)), file=outfile) print("#include_next \n", file=outfile) diff --git a/lib/python/qmk/cli/generate/__init__.py b/lib/python/qmk/cli/generate/__init__.py index f9585bfb5ce..bd75b044c5c 100644 --- a/lib/python/qmk/cli/generate/__init__.py +++ b/lib/python/qmk/cli/generate/__init__.py @@ -1,3 +1,7 @@ from . import api +from . import config_h from . import docs +from . import info_json +from . import layouts from . import rgb_breathe_table +from . import rules_mk diff --git a/lib/python/qmk/cli/generate/api.py b/lib/python/qmk/cli/generate/api.py index 66db37cb521..6d111f244cd 100755 --- a/lib/python/qmk/cli/generate/api.py +++ b/lib/python/qmk/cli/generate/api.py @@ -8,6 +8,7 @@ from milc import cli from qmk.datetime import current_datetime from qmk.info import info_json +from qmk.info_json_encoder import InfoJSONEncoder from qmk.keyboard import list_keyboards @@ -44,15 +45,16 @@ def generate_api(cli): if 'usb' in kb_all['keyboards'][keyboard_name]: usb = kb_all['keyboards'][keyboard_name]['usb'] - if usb['vid'] not in usb_list['devices']: + if 'vid' in usb and usb['vid'] not in usb_list['devices']: usb_list['devices'][usb['vid']] = {} - if usb['pid'] not in usb_list['devices'][usb['vid']]: + if 'pid' in usb and usb['pid'] not in usb_list['devices'][usb['vid']]: usb_list['devices'][usb['vid']][usb['pid']] = {} - usb_list['devices'][usb['vid']][usb['pid']][keyboard_name] = usb + if 'vid' in usb and 'pid' in usb: + usb_list['devices'][usb['vid']][usb['pid']][keyboard_name] = usb # Write the global JSON files - keyboard_list.write_text(json.dumps({'last_updated': current_datetime(), 'keyboards': sorted(kb_all['keyboards'])})) - keyboard_all.write_text(json.dumps(kb_all)) - usb_file.write_text(json.dumps(usb_list)) + keyboard_list.write_text(json.dumps({'last_updated': current_datetime(), 'keyboards': sorted(kb_all['keyboards'])}, cls=InfoJSONEncoder)) + keyboard_all.write_text(json.dumps(kb_all, cls=InfoJSONEncoder)) + usb_file.write_text(json.dumps(usb_list, cls=InfoJSONEncoder)) diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py new file mode 100755 index 00000000000..4d734017a17 --- /dev/null +++ b/lib/python/qmk/cli/generate/config_h.py @@ -0,0 +1,277 @@ +"""Used by the make system to generate info_config.h from info.json. +""" +from milc import cli + +from qmk.constants import LED_INDICATORS +from qmk.decorators import automagic_keyboard, automagic_keymap +from qmk.info import info_json, rgblight_animations, rgblight_properties, rgblight_toggles +from qmk.path import is_keyboard, normpath + +usb_properties = { + 'vid': 'VENDOR_ID', + 'pid': 'PRODUCT_ID', + 'device_ver': 'DEVICE_VER', +} + + +def debounce(debounce): + """Return the config.h lines that set debounce + """ + return """ +#ifndef DEBOUNCE +# define DEBOUNCE %s +#endif // DEBOUNCE +""" % debounce + + +def diode_direction(diode_direction): + """Return the config.h lines that set diode direction + """ + return """ +#ifndef DIODE_DIRECTION +# define DIODE_DIRECTION %s +#endif // DIODE_DIRECTION +""" % diode_direction + + +def keyboard_name(keyboard_name): + """Return the config.h lines that set the keyboard's name. + """ + return """ +#ifndef DESCRIPTION +# define DESCRIPTION %s +#endif // DESCRIPTION + +#ifndef PRODUCT +# define PRODUCT %s +#endif // PRODUCT +""" % (keyboard_name, keyboard_name) + + +def manufacturer(manufacturer): + """Return the config.h lines that set the manufacturer. + """ + return """ +#ifndef MANUFACTURER +# define MANUFACTURER %s +#endif // MANUFACTURER +""" % (manufacturer) + + +def direct_pins(direct_pins): + """Return the config.h lines that set the direct pins. + """ + rows = [] + + for row in direct_pins: + cols = ','.join([col or 'NO_PIN' for col in row]) + rows.append('{' + cols + '}') + + col_count = len(direct_pins[0]) + row_count = len(direct_pins) + + return """ +#ifndef MATRIX_COLS +# define MATRIX_COLS %s +#endif // MATRIX_COLS + +#ifndef MATRIX_ROWS +# define MATRIX_ROWS %s +#endif // MATRIX_ROWS + +#ifndef DIRECT_PINS +# define DIRECT_PINS {%s} +#endif // DIRECT_PINS +""" % (col_count, row_count, ','.join(rows)) + + +def col_pins(col_pins): + """Return the config.h lines that set the column pins. + """ + cols = ','.join(col_pins) + col_num = len(col_pins) + + return """ +#ifndef MATRIX_COLS +# define MATRIX_COLS %s +#endif // MATRIX_COLS + +#ifndef MATRIX_COL_PINS +# define MATRIX_COL_PINS {%s} +#endif // MATRIX_COL_PINS +""" % (col_num, cols) + + +def row_pins(row_pins): + """Return the config.h lines that set the row pins. + """ + rows = ','.join(row_pins) + row_num = len(row_pins) + + return """ +#ifndef MATRIX_ROWS +# define MATRIX_ROWS %s +#endif // MATRIX_ROWS + +#ifndef MATRIX_ROW_PINS +# define MATRIX_ROW_PINS {%s} +#endif // MATRIX_ROW_PINS +""" % (row_num, rows) + + +def indicators(config): + """Return the config.h lines that setup LED indicators. + """ + defines = [] + + for led, define in LED_INDICATORS.items(): + if led in config: + defines.append('') + defines.append('#ifndef %s' % (define,)) + defines.append('# define %s %s' % (define, config[led])) + defines.append('#endif // %s' % (define,)) + + return '\n'.join(defines) + + +def layout_aliases(layout_aliases): + """Return the config.h lines that setup layout aliases. + """ + defines = [] + + for alias, layout in layout_aliases.items(): + defines.append('') + defines.append('#ifndef %s' % (alias,)) + defines.append('# define %s %s' % (alias, layout)) + defines.append('#endif // %s' % (alias,)) + + return '\n'.join(defines) + + +def matrix_pins(matrix_pins): + """Add the matrix config to the config.h. + """ + pins = [] + + if 'direct' in matrix_pins: + pins.append(direct_pins(matrix_pins['direct'])) + + if 'cols' in matrix_pins: + pins.append(col_pins(matrix_pins['cols'])) + + if 'rows' in matrix_pins: + pins.append(row_pins(matrix_pins['rows'])) + + return '\n'.join(pins) + + +def rgblight(config): + """Return the config.h lines that setup rgblight. + """ + rgblight_config = [] + + for json_key, config_key in rgblight_properties.items(): + if json_key in config: + rgblight_config.append('') + rgblight_config.append('#ifndef %s' % (config_key,)) + rgblight_config.append('# define %s %s' % (config_key, config[json_key])) + rgblight_config.append('#endif // %s' % (config_key,)) + + for json_key, config_key in rgblight_toggles.items(): + if config.get(json_key): + rgblight_config.append('') + rgblight_config.append('#ifndef %s' % (config_key,)) + rgblight_config.append('# define %s' % (config_key,)) + rgblight_config.append('#endif // %s' % (config_key,)) + + for json_key, config_key in rgblight_animations.items(): + if 'animations' in config and config['animations'].get(json_key): + rgblight_config.append('') + rgblight_config.append('#ifndef %s' % (config_key,)) + rgblight_config.append('# define %s' % (config_key,)) + rgblight_config.append('#endif // %s' % (config_key,)) + + return '\n'.join(rgblight_config) + + +def usb_properties(usb_props): + """Return the config.h lines that setup USB params. + """ + usb_lines = [] + + for info_name, config_name in usb_props.items(): + if info_name in usb_props: + usb_lines.append('') + usb_lines.append('#ifndef ' + config_name) + usb_lines.append('# define %s %s' % (config_name, usb_props[info_name])) + usb_lines.append('#endif // ' + config_name) + + return '\n'.join(usb_lines) + + +@cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') +@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") +@cli.argument('-kb', '--keyboard', help='Keyboard to generate config.h for.') +@cli.subcommand('Used by the make system to generate info_config.h from info.json', hidden=True) +@automagic_keyboard +@automagic_keymap +def generate_config_h(cli): + """Generates the info_config.h file. + """ + # Determine our keyboard(s) + if not cli.config.generate_config_h.keyboard: + cli.log.error('Missing paramater: --keyboard') + cli.subcommands['info'].print_help() + return False + + if not is_keyboard(cli.config.generate_config_h.keyboard): + cli.log.error('Invalid keyboard: "%s"', cli.config.generate_config_h.keyboard) + return False + + # Build the info.json file + kb_info_json = info_json(cli.config.generate_config_h.keyboard) + + # Build the info_config.h file. + config_h_lines = ['/* This file was generated by `qmk generate-config-h`. Do not edit or copy.' ' */', '', '#pragma once'] + + if 'debounce' in kb_info_json: + config_h_lines.append(debounce(kb_info_json['debounce'])) + + if 'diode_direction' in kb_info_json: + config_h_lines.append(diode_direction(kb_info_json['diode_direction'])) + + if 'indicators' in kb_info_json: + config_h_lines.append(indicators(kb_info_json['indicators'])) + + if 'keyboard_name' in kb_info_json: + config_h_lines.append(keyboard_name(kb_info_json['keyboard_name'])) + + if 'layout_aliases' in kb_info_json: + config_h_lines.append(layout_aliases(kb_info_json['layout_aliases'])) + + if 'manufacturer' in kb_info_json: + config_h_lines.append(manufacturer(kb_info_json['manufacturer'])) + + if 'rgblight' in kb_info_json: + config_h_lines.append(rgblight(kb_info_json['rgblight'])) + + if 'matrix_pins' in kb_info_json: + config_h_lines.append(matrix_pins(kb_info_json['matrix_pins'])) + + if 'usb' in kb_info_json: + config_h_lines.append(usb_properties(kb_info_json['usb'])) + + # Show the results + config_h = '\n'.join(config_h_lines) + + if cli.args.output: + cli.args.output.parent.mkdir(parents=True, exist_ok=True) + if cli.args.output.exists(): + cli.args.output.replace(cli.args.output.name + '.bak') + cli.args.output.write_text(config_h) + + if not cli.args.quiet: + cli.log.info('Wrote info_config.h to %s.', cli.args.output) + + else: + print(config_h) diff --git a/lib/python/qmk/cli/generate/info_json.py b/lib/python/qmk/cli/generate/info_json.py new file mode 100755 index 00000000000..7e6654e45d4 --- /dev/null +++ b/lib/python/qmk/cli/generate/info_json.py @@ -0,0 +1,49 @@ +"""Keyboard information script. + +Compile an info.json for a particular keyboard and pretty-print it. +""" +import json + +from milc import cli + +from qmk.info_json_encoder import InfoJSONEncoder +from qmk.decorators import automagic_keyboard, automagic_keymap +from qmk.info import info_json +from qmk.path import is_keyboard + + +@cli.argument('-kb', '--keyboard', help='Keyboard to show info for.') +@cli.argument('-km', '--keymap', help='Show the layers for a JSON keymap too.') +@cli.subcommand('Generate an info.json file for a keyboard.', hidden=False if cli.config.user.developer else True) +@automagic_keyboard +@automagic_keymap +def generate_info_json(cli): + """Generate an info.json file for a keyboard + """ + # Determine our keyboard(s) + if not cli.config.generate_info_json.keyboard: + cli.log.error('Missing paramater: --keyboard') + cli.subcommands['info'].print_help() + return False + + if not is_keyboard(cli.config.generate_info_json.keyboard): + cli.log.error('Invalid keyboard: "%s"', cli.config.generate_info_json.keyboard) + return False + + # Build the info.json file + kb_info_json = info_json(cli.config.generate_info_json.keyboard) + pared_down_json = {} + + for key in ('manufacturer', 'maintainer', 'usb', 'keyboard_name', 'width', 'height', 'debounce', 'diode_direction', 'features', 'community_layouts', 'layout_aliases', 'matrix_pins', 'rgblight', 'url'): + if key in kb_info_json: + pared_down_json[key] = kb_info_json[key] + + pared_down_json['layouts'] = {} + if 'layouts' in pared_down_json: + for layout_name, layout in kb_info_json['layouts'].items(): + pared_down_json['layouts'][layout_name] = {} + pared_down_json['layouts'][layout_name]['key_count'] = layout.get('key_count', len(layout['layout'])) + pared_down_json['layouts'][layout_name]['layout'] = layout['layout'] + + # Display the results + print(json.dumps(pared_down_json, indent=2, cls=InfoJSONEncoder)) diff --git a/lib/python/qmk/cli/generate/layouts.py b/lib/python/qmk/cli/generate/layouts.py new file mode 100755 index 00000000000..809f0ef7ecb --- /dev/null +++ b/lib/python/qmk/cli/generate/layouts.py @@ -0,0 +1,93 @@ +"""Used by the make system to generate layouts.h from info.json. +""" +from milc import cli + +from qmk.constants import COL_LETTERS, ROW_LETTERS +from qmk.decorators import automagic_keyboard, automagic_keymap +from qmk.info import info_json +from qmk.path import is_keyboard, normpath + +usb_properties = { + 'vid': 'VENDOR_ID', + 'pid': 'PRODUCT_ID', + 'device_ver': 'DEVICE_VER', +} + + +@cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') +@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") +@cli.argument('-kb', '--keyboard', help='Keyboard to generate config.h for.') +@cli.subcommand('Used by the make system to generate layouts.h from info.json', hidden=True) +@automagic_keyboard +@automagic_keymap +def generate_layouts(cli): + """Generates the layouts.h file. + """ + # Determine our keyboard(s) + if not cli.config.generate_layouts.keyboard: + cli.log.error('Missing paramater: --keyboard') + cli.subcommands['info'].print_help() + return False + + if not is_keyboard(cli.config.generate_layouts.keyboard): + cli.log.error('Invalid keyboard: "%s"', cli.config.generate_layouts.keyboard) + return False + + # Build the info.json file + kb_info_json = info_json(cli.config.generate_layouts.keyboard) + + # Build the layouts.h file. + layouts_h_lines = ['/* This file was generated by `qmk generate-layouts`. Do not edit or copy.' ' */', '', '#pragma once'] + + if 'direct' in kb_info_json['matrix_pins']: + col_num = len(kb_info_json['matrix_pins']['direct'][0]) + row_num = len(kb_info_json['matrix_pins']['direct']) + elif 'cols' in kb_info_json['matrix_pins'] and 'rows' in kb_info_json['matrix_pins']: + col_num = len(kb_info_json['matrix_pins']['cols']) + row_num = len(kb_info_json['matrix_pins']['rows']) + else: + cli.log.error('%s: Invalid matrix config.', cli.config.generate_layouts.keyboard) + return False + + for layout_name in kb_info_json['layouts']: + if kb_info_json['layouts'][layout_name]['c_macro']: + continue + + layout_keys = [] + layout_matrix = [['KC_NO' for i in range(col_num)] for i in range(row_num)] + + for i, key in enumerate(kb_info_json['layouts'][layout_name]['layout']): + row = key['matrix'][0] + col = key['matrix'][1] + identifier = 'k%s%s' % (ROW_LETTERS[row], COL_LETTERS[col]) + + try: + layout_matrix[row][col] = identifier + layout_keys.append(identifier) + except IndexError: + key_name = key.get('label', identifier) + cli.log.error('Matrix data out of bounds for layout %s at index %s (%s): %s, %s', layout_name, i, key_name, row, col) + return False + + layouts_h_lines.append('') + layouts_h_lines.append('#define %s(%s) {\\' % (layout_name, ', '.join(layout_keys))) + + rows = ', \\\n'.join(['\t {' + ', '.join(row) + '}' for row in layout_matrix]) + rows += ' \\' + layouts_h_lines.append(rows) + layouts_h_lines.append('}') + + # Show the results + layouts_h = '\n'.join(layouts_h_lines) + '\n' + + if cli.args.output: + cli.args.output.parent.mkdir(parents=True, exist_ok=True) + if cli.args.output.exists(): + cli.args.output.replace(cli.args.output.name + '.bak') + cli.args.output.write_text(layouts_h) + + if not cli.args.quiet: + cli.log.info('Wrote info_config.h to %s.', cli.args.output) + + else: + print(layouts_h) diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py new file mode 100755 index 00000000000..4268ae047b4 --- /dev/null +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -0,0 +1,59 @@ +"""Used by the make system to generate a rules.mk +""" +from milc import cli + +from qmk.decorators import automagic_keyboard, automagic_keymap +from qmk.info import info_json +from qmk.path import is_keyboard, normpath + + +@cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') +@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") +@cli.argument('-kb', '--keyboard', help='Keyboard to generate config.h for.') +@cli.subcommand('Used by the make system to generate info_config.h from info.json', hidden=True) +@automagic_keyboard +@automagic_keymap +def generate_rules_mk(cli): + """Generates a rules.mk file from info.json. + """ + # Determine our keyboard(s) + if not cli.config.generate_rules_mk.keyboard: + cli.log.error('Missing paramater: --keyboard') + cli.subcommands['info'].print_help() + return False + + if not is_keyboard(cli.config.generate_rules_mk.keyboard): + cli.log.error('Invalid keyboard: "%s"', cli.config.generate_rules_mk.keyboard) + return False + + # Build the info.json file + kb_info_json = info_json(cli.config.generate_rules_mk.keyboard) + rules_mk_lines = ['# This file was generated by `qmk generate-rules-mk`. Do not edit or copy.', ''] + + # Find features that should be enabled + if 'features' in kb_info_json: + for feature, enabled in kb_info_json['features'].items(): + feature = feature.upper() + enabled = 'yes' if enabled else 'no' + rules_mk_lines.append(f'{feature}_ENABLE := {enabled}') + + # Add community layouts + if 'community_layouts' in kb_info_json: + rules_mk_lines.append(f'LAYOUTS = {" ".join(kb_info_json["community_layouts"])}') + + # Show the results + rules_mk = '\n'.join(rules_mk_lines) + '\n' + + if cli.args.output: + cli.args.output.parent.mkdir(parents=True, exist_ok=True) + if cli.args.output.exists(): + cli.args.output.replace(cli.args.output.name + '.bak') + cli.args.output.write_text(rules_mk) + + if cli.args.quiet: + print(cli.args.output) + else: + cli.log.info('Wrote info_config.h to %s.', cli.args.output) + + else: + print(rules_mk) diff --git a/lib/python/qmk/cli/info.py b/lib/python/qmk/cli/info.py index 9ab299a21e6..87d7253d4b4 100755 --- a/lib/python/qmk/cli/info.py +++ b/lib/python/qmk/cli/info.py @@ -7,6 +7,8 @@ import platform from milc import cli +from qmk.info_json_encoder import InfoJSONEncoder +from qmk.constants import COL_LETTERS, ROW_LETTERS from qmk.decorators import automagic_keyboard, automagic_keymap from qmk.keyboard import render_layouts, render_layout from qmk.keymap import locate_keymap @@ -15,9 +17,6 @@ from qmk.path import is_keyboard platform_id = platform.platform().lower() -ROW_LETTERS = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop' -COL_LETTERS = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijilmnopqrstuvwxyz' - def show_keymap(kb_info_json, title_caps=True): """Render the keymap in ascii art. @@ -149,7 +148,7 @@ def info(cli): # Output in the requested format if cli.args.format == 'json': - print(json.dumps(kb_info_json)) + print(json.dumps(kb_info_json, cls=InfoJSONEncoder)) elif cli.args.format == 'text': print_text_output(kb_info_json) elif cli.args.format == 'friendly': diff --git a/lib/python/qmk/cli/kle2json.py b/lib/python/qmk/cli/kle2json.py index 3d1bb8c43c0..66d504bfc21 100755 --- a/lib/python/qmk/cli/kle2json.py +++ b/lib/python/qmk/cli/kle2json.py @@ -3,25 +3,12 @@ import json import os from pathlib import Path -from decimal import Decimal -from collections import OrderedDict from milc import cli from kle2xy import KLE2xy from qmk.converter import kle2qmk - - -class CustomJSONEncoder(json.JSONEncoder): - def default(self, obj): - try: - if isinstance(obj, Decimal): - if obj % 2 in (Decimal(0), Decimal(1)): - return int(obj) - return float(obj) - except TypeError: - pass - return json.JSONEncoder.default(self, obj) +from qmk.info_json_encoder import InfoJSONEncoder @cli.argument('filename', help='The KLE raw txt to convert') @@ -52,24 +39,22 @@ def kle2json(cli): cli.log.error('Could not parse KLE raw data: %s', raw_code) cli.log.exception(e) return False - keyboard = OrderedDict( - keyboard_name=kle.name, - url='', - maintainer='qmk', - width=kle.columns, - height=kle.rows, - layouts={'LAYOUT': { - 'layout': 'LAYOUT_JSON_HERE' - }}, - ) - # Initialize keyboard with json encoded from ordered dict - keyboard = json.dumps(keyboard, indent=4, separators=(', ', ': '), sort_keys=False, cls=CustomJSONEncoder) - # Initialize layout with kle2qmk from converter module - layout = json.dumps(kle2qmk(kle), separators=(', ', ':'), cls=CustomJSONEncoder) - # Replace layout in keyboard json - keyboard = keyboard.replace('"LAYOUT_JSON_HERE"', layout) + keyboard = { + 'keyboard_name': kle.name, + 'url': '', + 'maintainer': 'qmk', + 'width': kle.columns, + 'height': kle.rows, + 'layouts': { + 'LAYOUT': { + 'layout': kle2qmk(kle) + } + }, + } + # Write our info.json - file = open(out_path / "info.json", "w") - file.write(keyboard) - file.close() + keyboard = json.dumps(keyboard, indent=4, separators=(', ', ': '), sort_keys=False, cls=InfoJSONEncoder) + info_json_file = out_path / 'info.json' + + info_json_file.write_text(keyboard) cli.log.info('Wrote out {fg_cyan}%s/info.json', out_path) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 94ab68e5e44..675832c5068 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -17,3 +17,14 @@ VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' DATE_FORMAT = '%Y-%m-%d' DATETIME_FORMAT = '%Y-%m-%d %H:%M:%S %Z' TIME_FORMAT = '%H:%M:%S' + +# Used when generating matrix locations +COL_LETTERS = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijilmnopqrstuvwxyz' +ROW_LETTERS = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop' + +# Mapping between info.json and config.h keys +LED_INDICATORS = { + 'caps_lock': 'LED_CAPS_LOCK_PIN', + 'num_lock': 'LED_NUM_LOCK_PIN', + 'scrol_lock': 'LED_SCROLL_LOCK_PIN' +} diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index f476dc666da..d7b128aa662 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -6,13 +6,45 @@ from pathlib import Path from milc import cli -from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS +from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS, LED_INDICATORS from qmk.c_parse import find_layouts from qmk.keyboard import config_h, rules_mk from qmk.keymap import list_keymaps from qmk.makefile import parse_rules_mk_file from qmk.math import compute +rgblight_properties = { + 'led_count': 'RGBLED_NUM', + 'pin': 'RGB_DI_PIN', + 'split_count': 'RGBLED_SPLIT', + 'max_brightness': 'RGBLIGHT_LIMIT_VAL', + 'hue_steps': 'RGBLIGHT_HUE_STEP', + 'saturation_steps': 'RGBLIGHT_SAT_STEP', + 'brightness_steps': 'RGBLIGHT_VAL_STEP' +} + +rgblight_toggles = { + 'sleep': 'RGBLIGHT_SLEEP', + 'split': 'RGBLIGHT_SPLIT', +} + +rgblight_animations = { + 'all': 'RGBLIGHT_ANIMATIONS', + 'alternating': 'RGBLIGHT_EFFECT_ALTERNATING', + 'breathing': 'RGBLIGHT_EFFECT_BREATHING', + 'christmas': 'RGBLIGHT_EFFECT_CHRISTMAS', + 'knight': 'RGBLIGHT_EFFECT_KNIGHT', + 'rainbow_mood': 'RGBLIGHT_EFFECT_RAINBOW_MOOD', + 'rainbow_swirl': 'RGBLIGHT_EFFECT_RAINBOW_SWIRL', + 'rgb_test': 'RGBLIGHT_EFFECT_RGB_TEST', + 'snake': 'RGBLIGHT_EFFECT_SNAKE', + 'static_gradient': 'RGBLIGHT_EFFECT_STATIC_GRADIENT', + 'twinkle': 'RGBLIGHT_EFFECT_TWINKLE' +} + +true_values = ['1', 'on', 'yes'] +false_values = ['0', 'off', 'no'] + def info_json(keyboard): """Generate the info.json data for a specific keyboard. @@ -38,8 +70,9 @@ def info_json(keyboard): info_data['keymaps'][keymap.name] = {'url': f'https://raw.githubusercontent.com/qmk/qmk_firmware/master/{keymap}/keymap.json'} # Populate layout data - for layout_name, layout_json in _find_all_layouts(info_data, keyboard, rules).items(): + for layout_name, layout_json in _find_all_layouts(info_data, keyboard).items(): if not layout_name.startswith('LAYOUT_kc'): + layout_json['c_macro'] = True info_data['layouts'][layout_name] = layout_json # Merge in the data from info.json, config.h, and rules.mk @@ -47,34 +80,179 @@ def info_json(keyboard): info_data = _extract_config_h(info_data) info_data = _extract_rules_mk(info_data) + # Make sure we have at least one layout + if not info_data.get('layouts'): + _log_error(info_data, 'No LAYOUTs defined! Need at least one layout defined in the keyboard.h or info.json.') + + # Make sure we supply layout macros for the community layouts we claim to support + # FIXME(skullydazed): This should be populated into info.json and read from there instead + if 'LAYOUTS' in rules and info_data.get('layouts'): + # Match these up against the supplied layouts + supported_layouts = rules['LAYOUTS'].strip().split() + for layout_name in sorted(info_data['layouts']): + layout_name = layout_name[7:] + + if layout_name in supported_layouts: + supported_layouts.remove(layout_name) + + if supported_layouts: + for supported_layout in supported_layouts: + _log_error(info_data, 'Claims to support community layout %s but no LAYOUT_%s() macro found' % (supported_layout, supported_layout)) + return info_data -def _extract_config_h(info_data): - """Pull some keyboard information from existing rules.mk files +def _extract_debounce(info_data, config_c): + """Handle debounce. + """ + if 'debounce' in info_data and 'DEBOUNCE' in config_c: + _log_warning(info_data, 'Debounce is specified in both info.json and config.h, the config.h value wins.') + + if 'DEBOUNCE' in config_c: + info_data['debounce'] = config_c.get('DEBOUNCE') + + return info_data + + +def _extract_diode_direction(info_data, config_c): + """Handle the diode direction. + """ + if 'diode_direction' in info_data and 'DIODE_DIRECTION' in config_c: + _log_warning(info_data, 'Diode direction is specified in both info.json and config.h, the config.h value wins.') + + if 'DIODE_DIRECTION' in config_c: + info_data['diode_direction'] = config_c.get('DIODE_DIRECTION') + + return info_data + + +def _extract_indicators(info_data, config_c): + """Find the LED indicator information. + """ + for json_key, config_key in LED_INDICATORS.items(): + if json_key in info_data.get('indicators', []) and config_key in config_c: + _log_warning(info_data, f'Indicator {json_key} is specified in both info.json and config.h, the config.h value wins.') + + if config_key in config_c: + info_data['indicators'][json_key] = config_c.get(config_key) + + return info_data + + +def _extract_community_layouts(info_data, rules): + """Find the community layouts in rules.mk. + """ + community_layouts = rules['LAYOUTS'].split() if 'LAYOUTS' in rules else [] + + if 'community_layouts' in info_data: + for layout in community_layouts: + if layout not in info_data['community_layouts']: + community_layouts.append(layout) + + else: + info_data['community_layouts'] = community_layouts + + return info_data + + +def _extract_features(info_data, rules): + """Find all the features enabled in rules.mk. + """ + for key, value in rules.items(): + if key.endswith('_ENABLE'): + key = '_'.join(key.split('_')[:-1]).lower() + value = True if value in true_values else False if value in false_values else value + + if 'config_h_features' not in info_data: + info_data['config_h_features'] = {} + + if 'features' not in info_data: + info_data['features'] = {} + + if key in info_data['features']: + _log_warning(info_data, 'Feature %s is specified in both info.json and rules.mk, the rules.mk value wins.' % (key,)) + + info_data['features'][key] = value + info_data['config_h_features'][key] = value + + return info_data + + +def _extract_rgblight(info_data, config_c): + """Handle the rgblight configuration + """ + rgblight = info_data.get('rgblight', {}) + animations = rgblight.get('animations', {}) + + for json_key, config_key in rgblight_properties.items(): + if config_key in config_c: + if json_key in rgblight: + _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) + + rgblight[json_key] = config_c[config_key] + + for json_key, config_key in rgblight_toggles.items(): + if config_key in config_c: + if json_key in rgblight: + _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.', json_key) + + rgblight[json_key] = config_c[config_key] + + for json_key, config_key in rgblight_animations.items(): + if config_key in config_c: + if json_key in animations: + _log_warning(info_data, 'RGB Light: animations: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) + + animations[json_key] = config_c[config_key] + + if animations: + rgblight['animations'] = animations + + if rgblight: + info_data['rgblight'] = rgblight + + return info_data + + +def _extract_matrix_info(info_data, config_c): + """Populate the matrix information. """ - config_c = config_h(info_data['keyboard_folder']) row_pins = config_c.get('MATRIX_ROW_PINS', '').replace('{', '').replace('}', '').strip() col_pins = config_c.get('MATRIX_COL_PINS', '').replace('{', '').replace('}', '').strip() direct_pins = config_c.get('DIRECT_PINS', '').replace(' ', '')[1:-1] - info_data['diode_direction'] = config_c.get('DIODE_DIRECTION') - info_data['matrix_size'] = { - 'rows': compute(config_c.get('MATRIX_ROWS', '0')), - 'cols': compute(config_c.get('MATRIX_COLS', '0')), - } - info_data['matrix_pins'] = {} + if 'MATRIX_ROWS' in config_c and 'MATRIX_COLS' in config_c: + if 'matrix_size' in info_data: + _log_warning(info_data, 'Matrix size is specified in both info.json and config.h, the config.h values win.') - if row_pins: - info_data['matrix_pins']['rows'] = row_pins.split(',') - if col_pins: - info_data['matrix_pins']['cols'] = col_pins.split(',') + info_data['matrix_size'] = { + 'rows': compute(config_c.get('MATRIX_ROWS', '0')), + 'cols': compute(config_c.get('MATRIX_COLS', '0')), + } + + if row_pins and col_pins: + if 'matrix_pins' in info_data: + _log_warning(info_data, 'Matrix pins are specified in both info.json and config.h, the config.h values win.') + + info_data['matrix_pins'] = {} + + if row_pins: + info_data['matrix_pins']['rows'] = row_pins.split(',') + + if col_pins: + info_data['matrix_pins']['cols'] = col_pins.split(',') if direct_pins: + if 'matrix_pins' in info_data: + _log_warning(info_data, 'Direct pins are specified in both info.json and config.h, the config.h values win.') + + info_data['matrix_pins'] = {} direct_pin_array = [] + for row in direct_pins.split('},{'): if row.startswith('{'): row = row[1:] + if row.endswith('}'): row = row[:-1] @@ -86,15 +264,43 @@ def _extract_config_h(info_data): direct_pin_array[-1].append(pin) - info_data['matrix_pins']['direct'] = direct_pin_array + info_data['matrix_pins']['direct'] = direct_pin_array - info_data['usb'] = { - 'vid': config_c.get('VENDOR_ID'), - 'pid': config_c.get('PRODUCT_ID'), - 'device_ver': config_c.get('DEVICE_VER'), - 'manufacturer': config_c.get('MANUFACTURER'), - 'product': config_c.get('PRODUCT'), - } + return info_data + + +def _extract_usb_info(info_data, config_c): + """Populate the USB information. + """ + usb_properties = {'vid': 'VENDOR_ID', 'pid': 'PRODUCT_ID', 'device_ver': 'DEVICE_VER'} + + if 'usb' not in info_data: + info_data['usb'] = {} + + for info_name, config_name in usb_properties.items(): + if config_name in config_c: + if info_name in info_data['usb']: + _log_warning(info_data, '%s in config.h is overwriting usb.%s in info.json' % (config_name, info_name)) + + info_data['usb'][info_name] = config_c[config_name] + + elif info_name not in info_data['usb']: + _log_error(info_data, '%s not specified in config.h, and %s not specified in info.json. One is required.' % (config_name, info_name)) + + return info_data + + +def _extract_config_h(info_data): + """Pull some keyboard information from existing config.h files + """ + config_c = config_h(info_data['keyboard_folder']) + + _extract_debounce(info_data, config_c) + _extract_diode_direction(info_data, config_c) + _extract_indicators(info_data, config_c) + _extract_matrix_info(info_data, config_c) + _extract_usb_info(info_data, config_c) + _extract_rgblight(info_data, config_c) return info_data @@ -106,16 +312,52 @@ def _extract_rules_mk(info_data): mcu = rules.get('MCU') if mcu in CHIBIOS_PROCESSORS: - return arm_processor_rules(info_data, rules) + arm_processor_rules(info_data, rules) elif mcu in LUFA_PROCESSORS + VUSB_PROCESSORS: - return avr_processor_rules(info_data, rules) + avr_processor_rules(info_data, rules) - msg = "Unknown MCU: " + str(mcu) + else: + cli.log.warning("%s: Unknown MCU: %s" % (info_data['keyboard_folder'], mcu)) + unknown_processor_rules(info_data, rules) - _log_warning(info_data, msg) + _extract_community_layouts(info_data, rules) + _extract_features(info_data, rules) - return unknown_processor_rules(info_data, rules) + return info_data + + +def _merge_layouts(info_data, new_info_data): + """Merge new_info_data into info_data in an intelligent way. + """ + for layout_name, layout_json in new_info_data['layouts'].items(): + if layout_name in info_data['layouts']: + # Pull in layouts we have a macro for + if len(info_data['layouts'][layout_name]['layout']) != len(layout_json['layout']): + msg = '%s: %s: Number of elements in info.json does not match! info.json:%s != %s:%s' + _log_error(info_data, msg % (info_data['keyboard_folder'], layout_name, len(layout_json['layout']), layout_name, len(info_data['layouts'][layout_name]['layout']))) + else: + for i, key in enumerate(info_data['layouts'][layout_name]['layout']): + key.update(layout_json['layout'][i]) + else: + # Pull in layouts that have matrix data + missing_matrix = False + for key in layout_json['layout']: + if 'matrix' not in key: + missing_matrix = True + + if not missing_matrix: + if layout_name in info_data['layouts']: + # Update an existing layout with new data + for i, key in enumerate(info_data['layouts'][layout_name]['layout']): + key.update(layout_json['layout'][i]) + + else: + # Copy in the new layout wholesale + layout_json['c_macro'] = False + info_data['layouts'][layout_name] = layout_json + + return info_data def _search_keyboard_h(path): @@ -131,34 +373,21 @@ def _search_keyboard_h(path): return layouts -def _find_all_layouts(info_data, keyboard, rules): +def _find_all_layouts(info_data, keyboard): """Looks for layout macros associated with this keyboard. """ layouts = _search_keyboard_h(Path(keyboard)) if not layouts: - # If we didn't find any layouts above we widen our search. This is error - # prone which is why we want to encourage people to follow the standard above. - _log_warning(info_data, 'Falling back to searching for KEYMAP/LAYOUT macros.') + # If we don't find any layouts from info.json or keyboard.h we widen our search. This is error prone which is why we want to encourage people to follow the standard above. + info_data['parse_warnings'].append('%s: Falling back to searching for KEYMAP/LAYOUT macros.' % (keyboard)) + for file in glob('keyboards/%s/*.h' % keyboard): if file.endswith('.h'): these_layouts = find_layouts(file) if these_layouts: layouts.update(these_layouts) - if 'LAYOUTS' in rules: - # Match these up against the supplied layouts - supported_layouts = rules['LAYOUTS'].strip().split() - for layout_name in sorted(layouts): - if not layout_name.startswith('LAYOUT_'): - continue - layout_name = layout_name[7:] - if layout_name in supported_layouts: - supported_layouts.remove(layout_name) - - if supported_layouts: - _log_error(info_data, 'Missing LAYOUT() macro for %s' % (', '.join(supported_layouts))) - return layouts @@ -231,32 +460,40 @@ def merge_info_jsons(keyboard, info_data): for info_file in find_info_json(keyboard): # Load and validate the JSON data try: - with info_file.open('r') as info_fd: - new_info_data = json.load(info_fd) + new_info_data = json.load(info_file.open('r')) except Exception as e: _log_error(info_data, "Invalid JSON in file %s: %s: %s" % (str(info_file), e.__class__.__name__, e)) - continue + new_info_data = {} if not isinstance(new_info_data, dict): _log_error(info_data, "Invalid file %s, root object should be a dictionary." % (str(info_file),)) continue # Copy whitelisted keys into `info_data` - for key in ('keyboard_name', 'manufacturer', 'identifier', 'url', 'maintainer', 'processor', 'bootloader', 'width', 'height'): + for key in ('debounce', 'diode_direction', 'indicators', 'keyboard_name', 'manufacturer', 'identifier', 'url', 'maintainer', 'processor', 'bootloader', 'width', 'height'): if key in new_info_data: info_data[key] = new_info_data[key] - # Merge the layouts in + # Deep merge certain keys + # FIXME(skullydazed/anyone): this should be generalized more so that we can inteligently merge more than one level deep. It would be nice if we could filter on valid keys too. That may have to wait for a future where we use openapi or something. + for key in ('features', 'layout_aliases', 'matrix_pins', 'rgblight', 'usb'): + if key in new_info_data: + if key not in info_data: + info_data[key] = {} + + info_data[key].update(new_info_data[key]) + + # Merge the layouts + if 'community_layouts' in new_info_data: + if 'community_layouts' in info_data: + for layout in new_info_data['community_layouts']: + if layout not in info_data['community_layouts']: + info_data['community_layouts'].append(layout) + else: + info_data['community_layouts'] = new_info_data['community_layouts'] + if 'layouts' in new_info_data: - for layout_name, json_layout in new_info_data['layouts'].items(): - # Only pull in layouts we have a macro for - if layout_name in info_data['layouts']: - if info_data['layouts'][layout_name]['key_count'] != len(json_layout['layout']): - msg = '%s: Number of elements in info.json does not match! info.json:%s != %s:%s' - _log_error(info_data, msg % (layout_name, len(json_layout['layout']), layout_name, len(info_data['layouts'][layout_name]['layout']))) - else: - for i, key in enumerate(info_data['layouts'][layout_name]['layout']): - key.update(json_layout['layout'][i]) + _merge_layouts(info_data, new_info_data) return info_data diff --git a/lib/python/qmk/info_json_encoder.py b/lib/python/qmk/info_json_encoder.py new file mode 100755 index 00000000000..60dae7247f9 --- /dev/null +++ b/lib/python/qmk/info_json_encoder.py @@ -0,0 +1,96 @@ +"""Class that pretty-prints QMK info.json files. +""" +import json +from decimal import Decimal + + +class InfoJSONEncoder(json.JSONEncoder): + """Custom encoder to make info.json's a little nicer to work with. + """ + container_types = (list, tuple, dict) + indentation_char = " " + + def __init__(self, *args, **kwargs): + super().__init__(*args, **kwargs) + self.indentation_level = 0 + + if not self.indent: + self.indent = 4 + + def encode(self, obj): + """Encode JSON objects for QMK. + """ + if isinstance(obj, Decimal): + if obj == int(obj): # I can't believe Decimal objects don't have .is_integer() + return int(obj) + return float(obj) + + elif isinstance(obj, (list, tuple)): + if self._primitives_only(obj): + return "[" + ", ".join(self.encode(element) for element in obj) + "]" + + else: + self.indentation_level += 1 + output = [self.indent_str + self.encode(element) for element in obj] + self.indentation_level -= 1 + return "[\n" + ",\n".join(output) + "\n" + self.indent_str + "]" + + elif isinstance(obj, dict): + if obj: + if self.indentation_level == 4: + # These are part of a layout, put them on a single line. + return "{ " + ", ".join(f"{self.encode(key)}: {self.encode(element)}" for key, element in sorted(obj.items())) + " }" + + else: + self.indentation_level += 1 + output = [self.indent_str + f"{json.dumps(key)}: {self.encode(value)}" for key, value in sorted(obj.items(), key=self.sort_root_dict)] + self.indentation_level -= 1 + return "{\n" + ",\n".join(output) + "\n" + self.indent_str + "}" + else: + return "{}" + else: + return super().encode(obj) + + def _primitives_only(self, obj): + """Returns true if the object doesn't have any container type objects (list, tuple, dict). + """ + if isinstance(obj, dict): + obj = obj.values() + + return not any(isinstance(element, self.container_types) for element in obj) + + def sort_root_dict(self, key): + """Forces layout to the back of the sort order. + """ + key = key[0] + + if self.indentation_level == 1: + if key == 'manufacturer': + return '10keyboard_name' + + elif key == 'keyboard_name': + return '11keyboard_name' + + elif key == 'maintainer': + return '12maintainer' + + elif key in ('height', 'width'): + return '40' + str(key) + + elif key == 'community_layouts': + return '97community_layouts' + + elif key == 'layout_aliases': + return '98layout_aliases' + + elif key == 'layouts': + return '99layouts' + + else: + return '50' + str(key) + + return key + + @property + def indent_str(self): + return self.indentation_char * (self.indentation_level * self.indent) diff --git a/message.mk b/message.mk index 84b23c1ba87..3240c041b9b 100644 --- a/message.mk +++ b/message.mk @@ -86,8 +86,7 @@ MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n -MSG_PYTHON_MISSING = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \ - Can not run bin/qmk! This tool will be required when the develop branch is merged on 2020 Aug 29.\n\n\ +MSG_PYTHON_MISSING = $(ERROR_COLOR)ERROR:$(NO_COLOR) Can not run bin/qmk!\n\n\ Please run $(BOLD)util/qmk_install.sh$(NO_COLOR) to install all the dependencies QMK requires.\n\n MSG_FLASH_BOOTLOADER = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's bootloader is not specified or is not supported by the \":flash\" target at this time.\n\n MSG_FLASH_ARCH = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's architecture is not supported by the \":flash\" target at this time.\n\n From e190872b822f247794213120e0f7a276c07c95b9 Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Fri, 1 Jan 2021 23:54:48 -0500 Subject: [PATCH 018/145] Improved Language Specific Keycodes for US International and Extended Layouts (#11307) Co-authored-by: Ryan --- docs/reference_keymap_extras.md | 2 + quantum/keymap_extras/keymap_us_extended.h | 227 ++++++++++++++++++ .../keymap_extras/keymap_us_international.h | 20 +- .../keymap_us_international_linux.h | 224 +++++++++++++++++ .../sendstring_us_international.h | 100 ++++++++ quantum/quantum.c | 33 ++- quantum/quantum.h | 1 + 7 files changed, 594 insertions(+), 13 deletions(-) create mode 100644 quantum/keymap_extras/keymap_us_extended.h create mode 100644 quantum/keymap_extras/keymap_us_international_linux.h create mode 100644 quantum/keymap_extras/sendstring_us_international.h diff --git a/docs/reference_keymap_extras.md b/docs/reference_keymap_extras.md index f2abb4e596b..40a1956844b 100644 --- a/docs/reference_keymap_extras.md +++ b/docs/reference_keymap_extras.md @@ -18,7 +18,9 @@ To use these, simply `#include` the corresponding [header file](https://github.c |Dutch (Belgium) |`keymap_belgian.h` | |English (Ireland) |`keymap_irish.h` | |English (UK) |`keymap_uk.h` | +|English (US Extended) |`keymap_us_extended.h` | |English (US International) |`keymap_us_international.h` | +|English (US International, Linux)|`keymap_us_international_linux.h`| |Estonian |`keymap_estonian.h` | |Finnish |`keymap_finnish.h` | |French |`keymap_french.h` | diff --git a/quantum/keymap_extras/keymap_us_extended.h b/quantum/keymap_extras/keymap_us_extended.h new file mode 100644 index 00000000000..b2b3a734c9f --- /dev/null +++ b/quantum/keymap_extras/keymap_us_extended.h @@ -0,0 +1,227 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "keymap.h" + +// clang-format off + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_GRV KC_GRV // ` +#define US_1 KC_1 // 1 +#define US_2 KC_2 // 2 +#define US_3 KC_3 // 3 +#define US_4 KC_4 // 4 +#define US_5 KC_5 // 5 +#define US_6 KC_6 // 6 +#define US_7 KC_7 // 7 +#define US_8 KC_8 // 8 +#define US_9 KC_9 // 9 +#define US_0 KC_0 // 0 +#define US_MINS KC_MINS // - +#define US_EQL KC_EQL // = +// Row 2 +#define US_Q KC_Q // Q +#define US_W KC_W // W +#define US_E KC_E // E +#define US_R KC_R // R +#define US_T KC_T // T +#define US_Y KC_Y // Y +#define US_U KC_U // U +#define US_I KC_I // I +#define US_O KC_O // O +#define US_P KC_P // P +#define US_LBRC KC_LBRC // [ +#define US_RBRC KC_RBRC // ] +#define US_BSLS KC_BSLS // (backslash) +// Row 3 +#define US_A KC_A // A +#define US_S KC_S // S +#define US_D KC_D // D +#define US_F KC_F // F +#define US_G KC_G // G +#define US_H KC_H // H +#define US_J KC_J // J +#define US_K KC_K // K +#define US_L KC_L // L +#define US_SCLN KC_SCLN // ; +#define US_QUOT KC_QUOT // ' +// Row 4 +#define US_Z KC_Z // Z +#define US_X KC_X // X +#define US_C KC_C // C +#define US_V KC_V // V +#define US_B KC_B // B +#define US_N KC_N // N +#define US_M KC_M // M +#define US_COMM KC_COMM // , +#define US_DOT KC_DOT // . +#define US_SLSH KC_SLSH // / + +/* Shifted symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ~ │ ! │ @ │ # │ $ │ % │ ^ │ & │ * │ ( │ ) │ _ │ + │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │   │   │   │   │   │   │   │   │   │   │ { │ } │  |  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │   │   │   │   │   │   │   │   │   │ : │ " │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │   │   │   │   │   │   │   │ < │ > │ ? │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_TILD S(US_GRV) // ~ +#define US_EXLM S(US_1) // ! +#define US_AT S(US_2) // @ +#define US_HASH S(US_3) // # +#define US_DLR S(US_4) // $ +#define US_PERC S(US_5) // % +#define US_CIRC S(US_6) // ^ +#define US_AMPR S(US_7) // & +#define US_ASTR S(US_8) // * +#define US_LPRN S(US_9) // ( +#define US_RPRN S(US_0) // ) +#define US_UNDS S(US_MINS) // _ +#define US_PLUS S(US_EQL) // + +// Row 2 +#define US_LCBR S(US_LBRC) // { +#define US_RCBR S(US_RBRC) // } +#define US_PIPE S(US_BSLS) // | +// Row 3 +#define US_COLN S(US_SCLN) // : +#define US_DQUO S(US_QUOT) // " +// Row 4 +#define US_LABK S(US_COMM) // < +#define US_RABK S(US_DOT) // > +#define US_QUES S(US_SLSH) // ? + +/* AltGr symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ ¹ │ ² │ ³ │ ¤ │ € │ ^ │ ̛  │ ¾ │ ‘ │ ’ │ ¥ │ × │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │ Ä │ Å │ É │ ® │ Þ │ Ü │ Ú │ Í │ Ó │ Ö │ « │ » │  ¬  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │ Á │ ß │ Ð │   │   │   │ Ï │ Œ │ Ø │ ¶ │ ' │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │ Æ │   │ © │   │   │ Ñ │ µ │ Ç │ ˙ │ ¿ │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_DGRV ALGR(US_GRV) // ` (dead) +#define US_SUP1 ALGR(US_1) // ¹ +#define US_SUP2 ALGR(US_2) // ² +#define US_SUP3 ALGR(US_3) // ³ +#define US_CURR ALGR(US_4) // ¤ +#define US_EURO ALGR(US_5) // € +#define US_DCIR ALGR(US_6) // ^ (dead) +#define US_HORN ALGR(US_7) // ̛̛ (dead) +#define US_OGON ALGR(US_8) // ˛ (dead) +#define US_LSQU ALGR(US_9) // ‘ +#define US_RSQU ALGR(US_0) // ’ +#define US_YEN ALGR(US_MINS) // ¥ +#define US_MUL ALGR(US_EQL) // × +// Row 2 +#define US_ADIA ALGR(US_Q) // Ä +#define US_ARNG ALGR(US_W) // Å +#define US_EACU ALGR(US_E) // É +#define US_EDIA ALGR(US_R) // Ë +#define US_THRN ALGR(US_T) // Þ +#define US_UDIA ALGR(US_Y) // Ü +#define US_UACU ALGR(US_U) // Ú +#define US_IACU ALGR(US_I) // Í +#define US_OACU ALGR(US_O) // Ó +#define US_ODIA ALGR(US_P) // Ö +#define US_LDAQ ALGR(US_LBRC) // « +#define US_RDAQ ALGR(US_RBRC) // » +#define US_NOT ALGR(US_BSLS) // ¬ +// Row 3 +#define US_AACU ALGR(US_A) // Á +#define US_SS ALGR(US_S) // ß +#define US_ETH ALGR(US_D) // Ð +#define US_IDIA ALGR(US_J) // Ï +#define US_OE ALGR(US_K) // Œ +#define US_OSTR ALGR(US_L) // Ø +#define US_PILC ALGR(US_SCLN) // ¶ +#define US_ACUT ALGR(US_QUOT) // ´ (dead) +// Row 4 +#define US_AE ALGR(US_Z) // Æ +#define US_OE_2 ALGR(US_X) // Œ +#define US_COPY ALGR(US_C) // © +#define US_REGD ALGR(US_V) // ® +#define US_NTIL ALGR(US_N) // Ñ +#define US_MICR ALGR(US_M) // µ +#define US_CCED ALGR(US_COMM) // Ç +#define US_DOTA ALGR(US_DOT) // ˙ (dead) +#define US_IQUE ALGR(US_SLSH) // ¿ + +/* Shift+AltGr symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ~ │ ¡ │ ˝ │ ¯ │ £ │ ¸ │ ¼ │ ½ │ ¾ │ ˘ │ ° │  ̣ │ ÷ │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │   │   │   │   │   │   │   │   │   │   │ “ │ ” │  ¦  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │   │ § │   │   │   │   │   │   │   │ ° │ " │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │   │   │ ¢ │   │   │   │   │   │ ˇ │  ̉ │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_DTIL S(ALGR(US_GRV)) // ~ (dead) +#define US_IEXL S(ALGR(US_1)) // ¡ +#define US_DACU S(ALGR(US_2)) // ˝ (dead) +#define US_MACR S(ALGR(US_3)) // ¯ (dead) +#define US_PND S(ALGR(US_4)) // £ +#define US_CEDL S(ALGR(US_5)) // ¸ (dead) +#define US_QRTR S(ALGR(US_6)) // ¼ +#define US_HALF S(ALGR(US_7)) // ½ +#define US_TQTR S(ALGR(US_8)) // ¾ +#define US_BREV S(ALGR(US_9)) // ˘ (dead) +#define US_RNGA S(ALGR(US_0)) // ° (dead) +#define US_DOTB S(ALGR(US_MINS)) // ̣ (dead) +#define US_DIV S(ALGR(US_EQL)) // ÷ +// Row 2 +#define US_LDQU S(ALGR(US_LBRC)) // “ +#define US_RDQU S(ALGR(US_LBRC)) // ” +#define US_BRKP S(ALGR(US_BSLS)) // ¦ +// Row 3 +#define US_SECT S(ALGR(US_S)) // § +#define US_DEG S(ALGR(US_SCLN)) // ° +#define US_DIAE S(ALGR(US_QUOT)) // ¨ (dead) +// Row 4 +#define US_CENT S(ALGR(US_C)) // ¢ +#define US_CARN S(ALGR(US_DOT)) // ˇ (dead) +#define US_HOKA S(ALGR(US_SLSH)) // ̉ (dead) + diff --git a/quantum/keymap_extras/keymap_us_international.h b/quantum/keymap_extras/keymap_us_international.h index a3bc465971c..49afcc4fb27 100644 --- a/quantum/keymap_extras/keymap_us_international.h +++ b/quantum/keymap_extras/keymap_us_international.h @@ -26,7 +26,7 @@ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │        │ + * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ´ │        │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ * │        │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │          │ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ @@ -34,7 +34,7 @@ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ */ // Row 1 -#define US_GRV KC_GRV // ` (dead) +#define US_DGRV KC_GRV // ` (dead) #define US_1 KC_1 // 1 #define US_2 KC_2 // 2 #define US_3 KC_3 // 3 @@ -72,7 +72,7 @@ #define US_K KC_K // K #define US_L KC_L // L #define US_SCLN KC_SCLN // ; -#define US_QUOT KC_QUOT // ' (dead) +#define US_ACUT KC_QUOT // ´ (dead) // Row 4 #define US_Z KC_Z // Z #define US_X KC_X // X @@ -91,7 +91,7 @@ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ * │     │   │   │   │   │   │   │   │   │   │   │ { │ } │  |  │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │      │   │   │   │   │   │   │   │   │   │ : │ " │        │ + * │      │   │   │   │   │   │   │   │   │   │ : │ ¨ │        │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ * │        │   │   │   │   │   │   │   │ < │ > │ ? │          │ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ @@ -99,13 +99,13 @@ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ */ // Row 1 -#define US_TILD S(US_GRV) // ~ (dead) +#define US_DTIL S(US_DGRV) // ~ (dead) #define US_EXLM S(US_1) // ! -#define US_AT S(US_2) // " +#define US_AT S(US_2) // @ #define US_HASH S(US_3) // # #define US_DLR S(US_4) // $ #define US_PERC S(US_5) // % -#define US_CIRC S(US_6) // ^ +#define US_DCIR S(US_6) // ^ (dead) #define US_AMPR S(US_7) // & #define US_ASTR S(US_8) // * #define US_LPRN S(US_9) // ( @@ -118,7 +118,7 @@ #define US_PIPE S(US_BSLS) // | // Row 3 #define US_COLN S(US_SCLN) // : -#define US_DQUO S(US_QUOT) // " (dead) +#define US_DIAE S(US_ACUT) // ¨ (dead) // Row 4 #define US_LABK S(US_COMM) // < #define US_RABK S(US_DOT) // > @@ -170,7 +170,7 @@ #define US_ETH ALGR(US_D) // Ð #define US_OSTR ALGR(US_L) // Ø #define US_PILC ALGR(US_SCLN) // ¶ -#define US_ACUT ALGR(US_QUOT) // ´ +#define US_NDAC ALGR(US_ACUT) // ´ // Row 4 #define US_AE ALGR(US_Z) // Æ #define US_COPY ALGR(US_C) // © @@ -201,6 +201,6 @@ // Row 3 #define US_SECT S(ALGR(US_S)) // § #define US_DEG S(ALGR(US_SCLN)) // ° -#define US_DIAE S(ALGR(US_QUOT)) // ¨ +#define US_NDDR S(ALGR(US_ACUT)) // ¨ // Row 4 #define US_CENT S(ALGR(US_C)) // ¢ diff --git a/quantum/keymap_extras/keymap_us_international_linux.h b/quantum/keymap_extras/keymap_us_international_linux.h new file mode 100644 index 00000000000..2c3e230393f --- /dev/null +++ b/quantum/keymap_extras/keymap_us_international_linux.h @@ -0,0 +1,224 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "keymap.h" + +// clang-format off + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ´ │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_DGRV KC_GRV // ` (dead) +#define US_1 KC_1 // 1 +#define US_2 KC_2 // 2 +#define US_3 KC_3 // 3 +#define US_4 KC_4 // 4 +#define US_5 KC_5 // 5 +#define US_6 KC_6 // 6 +#define US_7 KC_7 // 7 +#define US_8 KC_8 // 8 +#define US_9 KC_9 // 9 +#define US_0 KC_0 // 0 +#define US_MINS KC_MINS // - +#define US_EQL KC_EQL // = +// Row 2 +#define US_Q KC_Q // Q +#define US_W KC_W // W +#define US_E KC_E // E +#define US_R KC_R // R +#define US_T KC_T // T +#define US_Y KC_Y // Y +#define US_U KC_U // U +#define US_I KC_I // I +#define US_O KC_O // O +#define US_P KC_P // P +#define US_LBRC KC_LBRC // [ +#define US_RBRC KC_RBRC // ] +#define US_BSLS KC_BSLS // (backslash) +// Row 3 +#define US_A KC_A // A +#define US_S KC_S // S +#define US_D KC_D // D +#define US_F KC_F // F +#define US_G KC_G // G +#define US_H KC_H // H +#define US_J KC_J // J +#define US_K KC_K // K +#define US_L KC_L // L +#define US_SCLN KC_SCLN // ; +#define US_ACUT KC_QUOT // ´ (dead) +// Row 4 +#define US_Z KC_Z // Z +#define US_X KC_X // X +#define US_C KC_C // C +#define US_V KC_V // V +#define US_B KC_B // B +#define US_N KC_N // N +#define US_M KC_M // M +#define US_COMM KC_COMM // , +#define US_DOT KC_DOT // . +#define US_SLSH KC_SLSH // / + +/* Shifted symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ~ │ ! │ @ │ # │ $ │ % │ ^ │ & │ * │ ( │ ) │ _ │ + │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │   │   │   │   │   │   │   │   │   │   │ { │ } │  |  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │   │   │   │   │   │   │   │   │   │ : │ ¨ │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │   │   │   │   │   │   │   │ < │ > │ ? │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_DTIL S(US_DGRV) // ~ (dead) +#define US_EXLM S(US_1) // ! +#define US_AT S(US_2) // @ +#define US_HASH S(US_3) // # +#define US_DLR S(US_4) // $ +#define US_PERC S(US_5) // % +#define US_DCIR S(US_6) // ^ (dead) +#define US_AMPR S(US_7) // & +#define US_ASTR S(US_8) // * +#define US_LPRN S(US_9) // ( +#define US_RPRN S(US_0) // ) +#define US_UNDS S(US_MINS) // _ +#define US_PLUS S(US_EQL) // + +// Row 2 +#define US_LCBR S(US_LBRC) // { +#define US_RCBR S(US_RBRC) // } +#define US_PIPE S(US_BSLS) // | +// Row 3 +#define US_COLN S(US_SCLN) // : +#define US_DIAE S(US_ACUT) // ¨ (dead) +// Row 4 +#define US_LABK S(US_COMM) // < +#define US_RABK S(US_DOT) // > +#define US_QUES S(US_SLSH) // ? + +/* AltGr symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ ¡ │ ² │ ³ │ ¤ │ € │ ¼ │ ½ │ ¾ │ ‘ │ ’ │ ¥ │ × │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │ Ä │ Å │ É │ ® │ Þ │ Ü │ Ú │ Í │ Ó │ Ö │ « │ » │  ¬  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │ Á │ ß │ Ð │   │   │   │   │ Œ │ Ø │ ¶ │ ' │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │ Æ │   │ © │   │   │ Ñ │ µ │ Ç │ ˙ │ ¿ │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ + +// Row 1 +#define US_GRV ALGR(US_DGRV) // ` +#define US_IEXL ALGR(US_1) // ¡ +#define US_SUP2 ALGR(US_2) // ² +#define US_SUP3 ALGR(US_3) // ³ +#define US_CURR ALGR(US_4) // ¤ +#define US_EURO ALGR(US_5) // € +#define US_QRTR ALGR(US_6) // ¼ +#define US_HALF ALGR(US_7) // ½ +#define US_TQTR ALGR(US_8) // ¾ +#define US_LSQU ALGR(US_9) // ‘ +#define US_RSQU ALGR(US_0) // ’ +#define US_YEN ALGR(US_MINS) // ¥ +#define US_MUL ALGR(US_EQL) // × +// Row 2 +#define US_ADIA ALGR(US_Q) // Ä +#define US_ARNG ALGR(US_W) // Å +#define US_EACU ALGR(US_E) // É +#define US_REGD ALGR(US_R) // ® +#define US_THRN ALGR(US_T) // Þ +#define US_UDIA ALGR(US_Y) // Ü +#define US_UACU ALGR(US_U) // Ú +#define US_IACU ALGR(US_I) // Í +#define US_OACU ALGR(US_O) // Ó +#define US_ODIA ALGR(US_P) // Ö +#define US_LDAQ ALGR(US_LBRC) // « +#define US_RDAQ ALGR(US_RBRC) // » +#define US_NOT ALGR(US_BSLS) // ¬ +// Row 3 +#define US_AACU ALGR(US_A) // Á +#define US_SS ALGR(US_S) // ß +#define US_ETH ALGR(US_D) // Ð +#define US_OE ALGR(US_K) // Œ +#define US_OSTR ALGR(US_L) // Ø +#define US_PILC ALGR(US_SCLN) // ¶ +#define US_QUOT ALGR(US_ACUT) // ' +// Row 4 +#define US_AE ALGR(US_Z) // Æ +#define US_COPY ALGR(US_C) // © +#define US_NTIL ALGR(US_N) // Ñ +#define US_MICR ALGR(US_M) // µ +#define US_CCED ALGR(US_COMM) // Ç +#define US_DOTA ALGR(US_DOT) // ˙ (dead) +#define US_IQUE ALGR(US_SLSH) // ¿ + +/* Shift+AltGr symbols + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ~ │ ¹ │ ˝ │ ¯ │ £ │ ¸ │ ^ │ ̛  │ ˛ │ ˘ │ ° │  ̣ │ ÷ │       │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │     │   │   │   │   │   │   │   │   │   │   │ “ │ ” │  ¦  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │      │   │ § │   │   │   │   │   │   │   │ ° │ " │        │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │        │   │   │ ¢ │   │   │   │   │   │ ˇ │  ̉ │          │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │    │    │    │                        │    │    │    │    │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ +// Row 1 +#define US_TILD S(ALGR(US_DGRV)) // ~ +#define US_SUP1 S(ALGR(US_1)) // ¹ +#define US_DACU S(ALGR(US_2)) // ˝ (dead) +#define US_MACR S(ALGR(US_3)) // ¯ (dead) +#define US_PND S(ALGR(US_4)) // £ +#define US_CEDL S(ALGR(US_5)) // ¸ (dead) +#define US_CIRC S(ALGR(US_6)) // ^ +#define US_HORN S(ALGR(US_7)) // ̛ (dead) +#define US_OGON S(ALGR(US_8)) // ˛ (dead) +#define US_BREV S(ALGR(US_9)) // ˘ (dead) +#define US_RNGA S(ALGR(US_0)) // ° (dead) +#define US_DOTB S(ALGR(US_MINS)) // ̣ (dead) +#define US_DIV S(ALGR(US_EQL)) // ÷ +// Row 2 +#define US_LDQU S(ALGR(US_LBRC)) // “ +#define US_RDQU S(ALGR(US_LBRC)) // ” +#define US_BRKP S(ALGR(US_BSLS)) // ¦ +// Row 3 +#define US_SECT S(ALGR(US_S)) // § +#define US_DEG S(ALGR(US_SCLN)) // ° +#define US_DQUO S(ALGR(US_ACUT)) // " +// Row 4 +#define US_CENT S(ALGR(US_C)) // ¢ +#define US_CARN S(ALGR(US_DOT)) // ˇ (dead) +#define US_HOKA S(ALGR(US_SLSH)) // ̉ (dead) diff --git a/quantum/keymap_extras/sendstring_us_international.h b/quantum/keymap_extras/sendstring_us_international.h new file mode 100644 index 00000000000..53a5891fb14 --- /dev/null +++ b/quantum/keymap_extras/sendstring_us_international.h @@ -0,0 +1,100 @@ +/* Copyright 2019 Rys Sommefeldt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// Sendstring lookup tables for UK layouts + +#pragma once + +#include "keymap_us_international.h" +#include "quantum.h" + +// clang-format off + +const uint8_t ascii_to_shift_lut[16] PROGMEM = { + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + + KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 0), + KCLUT_ENTRY(1, 1, 1, 1, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 1, 0, 1, 0, 1, 1), + KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1), + KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1), + KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1), + KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 1, 1), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0), +}; + +__attribute__((weak)) const uint8_t ascii_to_dead_lut[16] PROGMEM = { + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + + KCLUT_ENTRY(0, 0, 1, 0, 0, 0, 0, 1), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 1, 0), + KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 1, 0), +}; + +const uint8_t ascii_to_keycode_lut[128] PROGMEM = { + // NUL SOH STX ETX EOT ENQ ACK BEL + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // BS TAB LF VT FF CR SO SI + KC_BSPC, KC_TAB, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // DLE DC1 DC2 DC3 DC4 NAK SYN ETB + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + // CAN EM SUB ESC FS GS RS US + XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + // ! " # $ % & ' + KC_SPC, US_1, US_ACUT, US_3, US_4, US_5, US_7, US_ACUT, + // ( ) * + , - . / + US_9, US_0, US_8, US_EQL, US_COMM, US_MINS, US_DOT, US_SLSH, + // 0 1 2 3 4 5 6 7 + US_0, US_1, US_2, US_3, US_4, US_5, US_6, US_7, + // 8 9 : ; < = > ? + US_8, US_9, US_SCLN, US_SCLN, US_COMM, US_EQL, US_DOT, US_SLSH, + // @ A B C D E F G + US_2, US_A, US_B, US_C, US_D, US_E, US_F, US_G, + // H I J K L M N O + US_H, US_I, US_J, US_K, US_L, US_M, US_N, US_O, + // P Q R S T U V W + US_P, US_Q, US_R, US_S, US_T, US_U, US_V, US_W, + // X Y Z [ \ ] ^ _ + US_X, US_Y, US_Z, US_LBRC, US_BSLS, US_RBRC, US_6, US_MINS, + // ` a b c d e f g + US_DGRV, US_A, US_B, US_C, US_D, US_E, US_F, US_G, + // h i j k l m n o + US_H, US_I, US_J, US_K, US_L, US_M, US_N, US_O, + // p q r s t u v w + US_P, US_Q, US_R, US_S, US_T, US_U, US_V, US_W, + // x y z { | } ~ DEL + US_X, US_Y, US_Z, US_LBRC, US_BSLS, US_RBRC, US_DGRV, KC_DEL +}; diff --git a/quantum/quantum.c b/quantum/quantum.c index 3ac0ed87161..ece0388d32c 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -391,6 +391,29 @@ __attribute__((weak)) const uint8_t ascii_to_altgr_lut[16] PROGMEM = { KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), }; +/* Bit-Packed look-up table to convert an ASCII character to whether + * [Space] needs to be sent after the keycode + */ +__attribute__((weak)) const uint8_t ascii_to_dead_lut[16] PROGMEM = { + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), + KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0), +}; + /* Look-up table to convert an ASCII character to a keycode. */ __attribute__((weak)) const uint8_t ascii_to_keycode_lut[128] PROGMEM = { @@ -528,9 +551,10 @@ void send_char(char ascii_code) { } #endif - uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - bool is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code); - bool is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code); + uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); + bool is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code); + bool is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code); + bool is_dead = PGM_LOADBIT(ascii_to_dead_lut, (uint8_t)ascii_code); if (is_shifted) { register_code(KC_LSFT); @@ -545,6 +569,9 @@ void send_char(char ascii_code) { if (is_shifted) { unregister_code(KC_LSFT); } + if (is_dead) { + tap_code(KC_SPACE); + } } void set_single_persistent_default_layer(uint8_t default_layer) { diff --git a/quantum/quantum.h b/quantum/quantum.h index 9b2b9dee6bc..7e209304b7b 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -288,6 +288,7 @@ static __inline__ void __interrupt_enable__(const uint8_t *__s) { extern const uint8_t ascii_to_keycode_lut[128]; extern const uint8_t ascii_to_shift_lut[16]; extern const uint8_t ascii_to_altgr_lut[16]; +extern const uint8_t ascii_to_dead_lut[16]; // clang-format off #define KCLUT_ENTRY(a, b, c, d, e, f, g, h) \ ( ((a) ? 1 : 0) << 0 \ From f27d8d94489342d4ce7ba9955cd062c725350db9 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 2 Jan 2021 12:05:56 -0800 Subject: [PATCH 019/145] Fix compiling on develop (#11409) --- lib/python/qmk/cli/generate/config_h.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index 4d734017a17..e160ffea83c 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -7,7 +7,7 @@ from qmk.decorators import automagic_keyboard, automagic_keymap from qmk.info import info_json, rgblight_animations, rgblight_properties, rgblight_toggles from qmk.path import is_keyboard, normpath -usb_properties = { +usb_prop_map = { 'vid': 'VENDOR_ID', 'pid': 'PRODUCT_ID', 'device_ver': 'DEVICE_VER', @@ -199,7 +199,7 @@ def usb_properties(usb_props): """ usb_lines = [] - for info_name, config_name in usb_props.items(): + for info_name, config_name in usb_prop_map.items(): if info_name in usb_props: usb_lines.append('') usb_lines.append('#ifndef ' + config_name) From 11bd98f684148ed9577b263189121e52027d66d9 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 2 Jan 2021 18:08:17 -0800 Subject: [PATCH 020/145] Fix broken keyboards (#11412) * Fix a couple errors * add a dependency for the generated headers --- keyboards/jm60/jm60.h | 4 +++- lib/python/qmk/cli/generate/layouts.py | 19 ++++++++++--------- lib/python/qmk/info.py | 3 +++ tmk_core/rules.mk | 8 ++++---- 4 files changed, 20 insertions(+), 14 deletions(-) diff --git a/keyboards/jm60/jm60.h b/keyboards/jm60/jm60.h index f83b94f902a..34ca4d3d6ca 100644 --- a/keyboards/jm60/jm60.h +++ b/keyboards/jm60/jm60.h @@ -35,7 +35,7 @@ along with this program. If not, see . * | 40 | 41 | 42 | 46 | 4a | 4b | 4c | 4d | * `-----------------------------------------------------------' */ -#define KEYMAP_ANSI( \ +#define LAYOUT_ansi( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, k2d, \ @@ -51,3 +51,5 @@ along with this program. If not, see . } #endif + +#define KEYMAP_ANSI LAYOUT_ansi diff --git a/lib/python/qmk/cli/generate/layouts.py b/lib/python/qmk/cli/generate/layouts.py index 809f0ef7ecb..273870e15c4 100755 --- a/lib/python/qmk/cli/generate/layouts.py +++ b/lib/python/qmk/cli/generate/layouts.py @@ -39,15 +39,16 @@ def generate_layouts(cli): # Build the layouts.h file. layouts_h_lines = ['/* This file was generated by `qmk generate-layouts`. Do not edit or copy.' ' */', '', '#pragma once'] - if 'direct' in kb_info_json['matrix_pins']: - col_num = len(kb_info_json['matrix_pins']['direct'][0]) - row_num = len(kb_info_json['matrix_pins']['direct']) - elif 'cols' in kb_info_json['matrix_pins'] and 'rows' in kb_info_json['matrix_pins']: - col_num = len(kb_info_json['matrix_pins']['cols']) - row_num = len(kb_info_json['matrix_pins']['rows']) - else: - cli.log.error('%s: Invalid matrix config.', cli.config.generate_layouts.keyboard) - return False + if 'matrix_pins' in kb_info_json: + if 'direct' in kb_info_json['matrix_pins']: + col_num = len(kb_info_json['matrix_pins']['direct'][0]) + row_num = len(kb_info_json['matrix_pins']['direct']) + elif 'cols' in kb_info_json['matrix_pins'] and 'rows' in kb_info_json['matrix_pins']: + col_num = len(kb_info_json['matrix_pins']['cols']) + row_num = len(kb_info_json['matrix_pins']['rows']) + else: + cli.log.error('%s: Invalid matrix config.', cli.config.generate_layouts.keyboard) + return False for layout_name in kb_info_json['layouts']: if kb_info_json['layouts'][layout_name]['c_macro']: diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index d7b128aa662..2954a17e09b 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -134,6 +134,9 @@ def _extract_indicators(info_data, config_c): _log_warning(info_data, f'Indicator {json_key} is specified in both info.json and config.h, the config.h value wins.') if config_key in config_c: + if 'indicators' not in info_data: + info_data['indicators'] = {} + info_data['indicators'][json_key] = config_c.get(config_key) return info_data diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index a77e55dd13a..b595ddb1db4 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -324,27 +324,27 @@ $1_CXXFLAGS = $$(ALL_CXXFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) $ $1_ASFLAGS = $$(ALL_ASFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) # Compile: create object files from C source files. -$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN) +$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD) $$(eval CMD := $$(CC) -c $$($1_CFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) # Compile: create object files from C++ source files. -$1/%.o : %.cpp $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) +$1/%.o : %.cpp $1/%.d $1/cxxflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) -$1/%.o : %.cc $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) +$1/%.o : %.cc $1/%.d $1/cxxflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) # Assemble: create object files from assembler source files. -$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN) +$1/%.o : %.S $1/asflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) @mkdir -p $$(@D) @$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_ASFLAGS) $$< -o $$@) From 7456e6c776e9f08d42f010c5dffaaaadd74f10a8 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 3 Jan 2021 13:17:34 +1100 Subject: [PATCH 021/145] ChibiOS conf migrations... take 4 (#11413) * ChibiOS conf upgrade for cannonkeys/tsukuyomi cannonkeys/tsukuyomi - 7beddc74b03d652481198843a178177de5da3ddb * ChibiOS conf upgrade for misterknife/knife66_iso misterknife/knife66_iso - f2dd6e6c54258ae9d09a88215b36fba34947fc23 * ChibiOS conf upgrade for mode/eighty mode/eighty/m80h - 4bbbee01a89a5b4ab5f4de36e0dd2044cf54a698 mode/eighty/m80s - 6de4a1affab4ed8f08423eb511393ed797e3ea77 --- keyboards/cannonkeys/tsukuyomi/chconf.h | 729 +------------------- keyboards/cannonkeys/tsukuyomi/halconf.h | 536 +------------- keyboards/cannonkeys/tsukuyomi/mcuconf.h | 185 +---- keyboards/misterknife/knife66_iso/chconf.h | 729 +------------------- keyboards/misterknife/knife66_iso/halconf.h | 536 +------------- keyboards/misterknife/knife66_iso/mcuconf.h | 186 +---- keyboards/mode/eighty/chconf.h | 729 +------------------- keyboards/mode/eighty/halconf.h | 536 +------------- keyboards/mode/eighty/mcuconf.h | 184 +---- 9 files changed, 210 insertions(+), 4140 deletions(-) diff --git a/keyboards/cannonkeys/tsukuyomi/chconf.h b/keyboards/cannonkeys/tsukuyomi/chconf.h index 03f63da36a8..497df239019 100644 --- a/keyboards/cannonkeys/tsukuyomi/chconf.h +++ b/keyboards/cannonkeys/tsukuyomi/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/tsukuyomi/halconf.h b/keyboards/cannonkeys/tsukuyomi/halconf.h index 921803762ea..b030c0c2c97 100644 --- a/keyboards/cannonkeys/tsukuyomi/halconf.h +++ b/keyboards/cannonkeys/tsukuyomi/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/tsukuyomi/mcuconf.h b/keyboards/cannonkeys/tsukuyomi/mcuconf.h index 43fe0a462ef..ae8344c24d3 100644 --- a/keyboards/cannonkeys/tsukuyomi/mcuconf.h +++ b/keyboards/cannonkeys/tsukuyomi/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/misterknife/knife66_iso/chconf.h b/keyboards/misterknife/knife66_iso/chconf.h index 03f63da36a8..59695412b1c 100644 --- a/keyboards/misterknife/knife66_iso/chconf.h +++ b/keyboards/misterknife/knife66_iso/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/misterknife/knife66_iso/halconf.h b/keyboards/misterknife/knife66_iso/halconf.h index adb1a907154..d84bb5294cf 100644 --- a/keyboards/misterknife/knife66_iso/halconf.h +++ b/keyboards/misterknife/knife66_iso/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/misterknife/knife66_iso/mcuconf.h b/keyboards/misterknife/knife66_iso/mcuconf.h index 00292cab1f6..2355f4f2a0b 100644 --- a/keyboards/misterknife/knife66_iso/mcuconf.h +++ b/keyboards/misterknife/knife66_iso/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/mode/eighty/chconf.h b/keyboards/mode/eighty/chconf.h index 03f63da36a8..922db542845 100644 --- a/keyboards/mode/eighty/chconf.h +++ b/keyboards/mode/eighty/chconf.h @@ -1,714 +1,45 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/mode/eighty/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif +#pragma once -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif +#define CH_CFG_USE_TM FALSE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_HEAP FALSE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_MEMPOOLS FALSE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/mode/eighty/halconf.h b/keyboards/mode/eighty/halconf.h index de0f29ce6ed..3fac35b587c 100644 --- a/keyboards/mode/eighty/halconf.h +++ b/keyboards/mode/eighty/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/mode/eighty/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/mode/eighty/mcuconf.h b/keyboards/mode/eighty/mcuconf.h index 8d706de2ae8..52c077f4400 100644 --- a/keyboards/mode/eighty/mcuconf.h +++ b/keyboards/mode/eighty/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/mode/eighty/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From e8e090acede2596e19de40628543f4ed27d33ab0 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 3 Jan 2021 13:29:19 +1100 Subject: [PATCH 022/145] Remove handwired/bluepill. (#11415) --- keyboards/handwired/bluepill/.noci | 0 keyboards/handwired/bluepill/bluepill.c | 1 - keyboards/handwired/bluepill/bluepill.h | 54 -- keyboards/handwired/bluepill/bluepill70/.noci | 0 .../bluepill/bluepill70/bluepill70.c | 1 - .../bluepill/bluepill70/bluepill70.h | 4 - .../bluepill/bluepill70/bootloader_defs.h | 8 - .../handwired/bluepill/bluepill70/chconf.h | 714 ------------------ .../handwired/bluepill/bluepill70/config.h | 21 - .../handwired/bluepill/bluepill70/flash.sh | 2 - .../handwired/bluepill/bluepill70/halconf.h | 525 ------------- .../handwired/bluepill/bluepill70/info.json | 187 ----- keyboards/handwired/bluepill/bluepill70/led.c | 38 - .../handwired/bluepill/bluepill70/matrix.c | 225 ------ .../handwired/bluepill/bluepill70/mcuconf.h | 209 ----- .../handwired/bluepill/bluepill70/rules.mk | 9 - .../boards/GENERIC_STM32_F103/board.c | 49 -- .../boards/GENERIC_STM32_F103/board.h | 170 ----- .../boards/GENERIC_STM32_F103/board.mk | 5 - keyboards/handwired/bluepill/config.h | 53 -- .../bluepill/keymaps/default/keymap.c | 69 -- .../handwired/bluepill/keymaps/iso/keymap.c | 69 -- .../ld/STM32F103x8_stm32duino_bootloader.ld | 85 --- keyboards/handwired/bluepill/readme.md | 60 -- keyboards/handwired/bluepill/rules.mk | 10 - 25 files changed, 2568 deletions(-) delete mode 100644 keyboards/handwired/bluepill/.noci delete mode 100644 keyboards/handwired/bluepill/bluepill.c delete mode 100644 keyboards/handwired/bluepill/bluepill.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/.noci delete mode 100644 keyboards/handwired/bluepill/bluepill70/bluepill70.c delete mode 100644 keyboards/handwired/bluepill/bluepill70/bluepill70.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/bootloader_defs.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/chconf.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/config.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/flash.sh delete mode 100644 keyboards/handwired/bluepill/bluepill70/halconf.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/info.json delete mode 100644 keyboards/handwired/bluepill/bluepill70/led.c delete mode 100644 keyboards/handwired/bluepill/bluepill70/matrix.c delete mode 100644 keyboards/handwired/bluepill/bluepill70/mcuconf.h delete mode 100644 keyboards/handwired/bluepill/bluepill70/rules.mk delete mode 100644 keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.c delete mode 100644 keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.h delete mode 100644 keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.mk delete mode 100644 keyboards/handwired/bluepill/config.h delete mode 100644 keyboards/handwired/bluepill/keymaps/default/keymap.c delete mode 100644 keyboards/handwired/bluepill/keymaps/iso/keymap.c delete mode 100644 keyboards/handwired/bluepill/ld/STM32F103x8_stm32duino_bootloader.ld delete mode 100644 keyboards/handwired/bluepill/readme.md delete mode 100644 keyboards/handwired/bluepill/rules.mk diff --git a/keyboards/handwired/bluepill/.noci b/keyboards/handwired/bluepill/.noci deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/handwired/bluepill/bluepill.c b/keyboards/handwired/bluepill/bluepill.c deleted file mode 100644 index 85c92dfe96f..00000000000 --- a/keyboards/handwired/bluepill/bluepill.c +++ /dev/null @@ -1 +0,0 @@ -#include "bluepill.h" \ No newline at end of file diff --git a/keyboards/handwired/bluepill/bluepill.h b/keyboards/handwired/bluepill/bluepill.h deleted file mode 100644 index a686d155cea..00000000000 --- a/keyboards/handwired/bluepill/bluepill.h +++ /dev/null @@ -1,54 +0,0 @@ -#pragma once - -#include "quantum.h" -#include "led.h" - -/* ANSI LAYOUT - ESC| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| PSC| PGU| PGD - GRA| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ' | ¡ | BCKS | DEL - TAB| Q | W | E | R | T | Y | U | I | O | P | ` | + | | HOM - CAP| A | S | D | F | G | H | J | K | L | Ñ | ´ | Ç | ENTER | END - LSI| (<)| Z | X | C | V | B | N | M | , | . | - | RSHIF | UP | FNL - LCT| WIN| ALT| ESPACE | ALG| FN | RCT| LEF| DOW| RIG -*/ - -#define LAYOUT_seventy_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K59 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K0E, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K1D, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ - { K50, K51, K52, KC_NO, KC_NO, KC_NO, K53, KC_NO, KC_NO,K54, K55, K56, K57, K58, K59 } \ -} - -/* ISO LAYOUT - ESC| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| PSC| PGU| PGD - GRA| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ' | ¡ | BCKS | DEL - TAB| Q | W | E | R | T | Y | U | I | O | P | ` | + | | HOM - CAP| A | S | D | F | G | H | J | K | L | Ñ | ´ | Ç | ENTER | END - LSI| < | Z | X | C | V | B | N | M | , | . | - | RSHIF | UP | FNL - LCT| WIN| ALT| ESPACE | ALG| FN | RCT| LEF| DOW| RIG -*/ - -#define LAYOUT_seventy_iso( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K59 \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K0E, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K1D, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ - { K50, K51, K52, KC_NO, KC_NO, KC_NO, K53, KC_NO, KC_NO,K54, K55, K56, K57, K58, K59 } \ -} diff --git a/keyboards/handwired/bluepill/bluepill70/.noci b/keyboards/handwired/bluepill/bluepill70/.noci deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/handwired/bluepill/bluepill70/bluepill70.c b/keyboards/handwired/bluepill/bluepill70/bluepill70.c deleted file mode 100644 index 511c602d452..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/bluepill70.c +++ /dev/null @@ -1 +0,0 @@ -#include "bluepill70.h" \ No newline at end of file diff --git a/keyboards/handwired/bluepill/bluepill70/bluepill70.h b/keyboards/handwired/bluepill/bluepill70/bluepill70.h deleted file mode 100644 index 8a313cc500a..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/bluepill70.h +++ /dev/null @@ -1,4 +0,0 @@ -#pragma once -#include "bluepill.h" -// Modified by Xydane -// #define LAYOUT(k00) {{ k00 }} \ No newline at end of file diff --git a/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h b/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h deleted file mode 100644 index 46c37a25e9d..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/bootloader_defs.h +++ /dev/null @@ -1,8 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ - -// STM32F103* does NOT have an USB bootloader in ROM (only serial), -// so setting anything here does not make much sense -// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/handwired/bluepill/bluepill70/chconf.h b/keyboards/handwired/bluepill/bluepill70/chconf.h deleted file mode 100644 index 23af0349ce3..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 16 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 2000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/bluepill/bluepill70/config.h b/keyboards/handwired/bluepill/bluepill70/config.h deleted file mode 100644 index ae00a470aa2..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/config.h +++ /dev/null @@ -1,21 +0,0 @@ -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 - -// Modified by Xydane -#define MANUFACTURER "QMK" -#define PRODUCT "BluePill70" -#define DESCRIPTION "QMK keyboard firmware with ChibiOS" - -/* key matrix size */ -// Modified by Xydane -#define MATRIX_ROWS 6 -#define MATRIX_COLS 15 -#define DIODE_DIRECTION COL2ROW - -// Iso fix for Space Cadet, comment for ANSI layouts -#define LSPO_KEY KC_8 -#define RSPC_KEY KC_9 diff --git a/keyboards/handwired/bluepill/bluepill70/flash.sh b/keyboards/handwired/bluepill/bluepill70/flash.sh deleted file mode 100644 index d001ff007e9..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/flash.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin \ No newline at end of file diff --git a/keyboards/handwired/bluepill/bluepill70/halconf.h b/keyboards/handwired/bluepill/bluepill70/halconf.h deleted file mode 100644 index db65fadea3c..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/bluepill/bluepill70/info.json b/keyboards/handwired/bluepill/bluepill70/info.json deleted file mode 100644 index 3f08b50e551..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/info.json +++ /dev/null @@ -1,187 +0,0 @@ -{ - "keyboard_name": "BluePill 70", - "url": "", - "maintainer": "qmk", - "width": 16, - "height": 6, - "layouts": { - "LAYOUT_seventy_ansi": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":1, "y":0}, - {"label":"F2", "x":2, "y":0}, - {"label":"F3", "x":3, "y":0}, - {"label":"F4", "x":4, "y":0}, - {"label":"F5", "x":5, "y":0}, - {"label":"F6", "x":6, "y":0}, - {"label":"F7", "x":7, "y":0}, - {"label":"F8", "x":8, "y":0}, - {"label":"F9", "x":9, "y":0}, - {"label":"F10", "x":10, "y":0}, - {"label":"F11", "x":11, "y":0}, - {"label":"F12", "x":12, "y":0}, - {"label":"Print Screen", "x":13, "y":0}, - {"label":"Home", "x":14, "y":0}, - {"label":"End", "x":15, "y":0}, - {"label":"`", "x":0, "y":1}, - {"label":"1", "x":1, "y":1}, - {"label":"2", "x":2, "y":1}, - {"label":"3", "x":3, "y":1}, - {"label":"4", "x":4, "y":1}, - {"label":"5", "x":5, "y":1}, - {"label":"6", "x":6, "y":1}, - {"label":"7", "x":7, "y":1}, - {"label":"8", "x":8, "y":1}, - {"label":"9", "x":9, "y":1}, - {"label":"0", "x":10, "y":1}, - {"label":"-", "x":11, "y":1}, - {"label":"=", "x":12, "y":1}, - {"label":"Backspace", "x":13, "y":1, "w":2}, - {"label":"Delete", "x":15, "y":1}, - {"label":"Tab", "x":0, "y":2, "w":1.5}, - {"label":"Q", "x":1.5, "y":2}, - {"label":"W", "x":2.5, "y":2}, - {"label":"E", "x":3.5, "y":2}, - {"label":"R", "x":4.5, "y":2}, - {"label":"T", "x":5.5, "y":2}, - {"label":"Y", "x":6.5, "y":2}, - {"label":"U", "x":7.5, "y":2}, - {"label":"I", "x":8.5, "y":2}, - {"label":"O", "x":9.5, "y":2}, - {"label":"P", "x":10.5, "y":2}, - {"label":"[", "x":11.5, "y":2}, - {"label":"]", "x":12.5, "y":2}, - {"label":"Page Up", "x":15, "y":2}, - {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, - {"label":"A", "x":1.75, "y":3}, - {"label":"S", "x":2.75, "y":3}, - {"label":"D", "x":3.75, "y":3}, - {"label":"F", "x":4.75, "y":3}, - {"label":"G", "x":5.75, "y":3}, - {"label":"H", "x":6.75, "y":3}, - {"label":"J", "x":7.75, "y":3}, - {"label":"K", "x":8.75, "y":3}, - {"label":"L", "x":9.75, "y":3}, - {"label":";", "x":10.75, "y":3}, - {"label":"'", "x":11.75, "y":3}, - {"label":"Enter", "x":12.75, "y":3, "w":2.25}, - {"label":"\\", "x":13.5, "y":2, "w":1.5}, - {"label":"Page Down", "x":15, "y":3}, - {"label":"Shift", "x":0, "y":4, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":4}, - {"label":"Z", "x":2.25, "y":4}, - {"label":"X", "x":3.25, "y":4}, - {"label":"C", "x":4.25, "y":4}, - {"label":"V", "x":5.25, "y":4}, - {"label":"B", "x":6.25, "y":4}, - {"label":"N", "x":7.25, "y":4}, - {"label":"M", "x":8.25, "y":4}, - {"label":",", "x":9.25, "y":4}, - {"label":".", "x":10.25, "y":4}, - {"label":"/", "x":11.25, "y":4}, - {"label":"Shift", "x":12.25, "y":4, "w":1.75}, - {"label":"Up", "x":14, "y":4}, - {"label":"TT(2)", "x":15, "y":4}, - {"label":"Ctrl", "x":0, "y":5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5, "w":1.25}, - {"label":"Space", "x":3.75, "y":5, "w":6.25}, - {"label":"Alt", "x":10, "y":5}, - {"label":"Fn", "x":11, "y":5}, - {"label":"Ctrl", "x":12, "y":5}, - {"label":"Left", "x":13, "y":5}, - {"label":"Down", "x":14, "y":5}, - {"label":"Right", "x":15, "y":5} - ] - }, - "LAYOUT_seventy_iso": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":1, "y":0}, - {"label":"F2", "x":2, "y":0}, - {"label":"F3", "x":3, "y":0}, - {"label":"F4", "x":4, "y":0}, - {"label":"F5", "x":5, "y":0}, - {"label":"F6", "x":6, "y":0}, - {"label":"F7", "x":7, "y":0}, - {"label":"F8", "x":8, "y":0}, - {"label":"F9", "x":9, "y":0}, - {"label":"F10", "x":10, "y":0}, - {"label":"F11", "x":11, "y":0}, - {"label":"F12", "x":12, "y":0}, - {"label":"Print Screen", "x":13, "y":0}, - {"label":"Home", "x":14, "y":0}, - {"label":"End", "x":15, "y":0}, - {"label":"`", "x":0, "y":1}, - {"label":"1", "x":1, "y":1}, - {"label":"2", "x":2, "y":1}, - {"label":"3", "x":3, "y":1}, - {"label":"4", "x":4, "y":1}, - {"label":"5", "x":5, "y":1}, - {"label":"6", "x":6, "y":1}, - {"label":"7", "x":7, "y":1}, - {"label":"8", "x":8, "y":1}, - {"label":"9", "x":9, "y":1}, - {"label":"0", "x":10, "y":1}, - {"label":"-", "x":11, "y":1}, - {"label":"=", "x":12, "y":1}, - {"label":"Backspace", "x":13, "y":1, "w":2}, - {"label":"Delete", "x":15, "y":1}, - {"label":"Tab", "x":0, "y":2, "w":1.5}, - {"label":"Q", "x":1.5, "y":2}, - {"label":"W", "x":2.5, "y":2}, - {"label":"E", "x":3.5, "y":2}, - {"label":"R", "x":4.5, "y":2}, - {"label":"T", "x":5.5, "y":2}, - {"label":"Y", "x":6.5, "y":2}, - {"label":"U", "x":7.5, "y":2}, - {"label":"I", "x":8.5, "y":2}, - {"label":"O", "x":9.5, "y":2}, - {"label":"P", "x":10.5, "y":2}, - {"label":"[", "x":11.5, "y":2}, - {"label":"]", "x":12.5, "y":2}, - {"label":"Page Up", "x":15, "y":2}, - {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, - {"label":"A", "x":1.75, "y":3}, - {"label":"S", "x":2.75, "y":3}, - {"label":"D", "x":3.75, "y":3}, - {"label":"F", "x":4.75, "y":3}, - {"label":"G", "x":5.75, "y":3}, - {"label":"H", "x":6.75, "y":3}, - {"label":"J", "x":7.75, "y":3}, - {"label":"K", "x":8.75, "y":3}, - {"label":"L", "x":9.75, "y":3}, - {"label":";", "x":10.75, "y":3}, - {"label":",", "x":11.75, "y":3}, - {"label":"ISO #", "x":12.75, "y":3}, - {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, - {"label":"Page Down", "x":15, "y":3}, - {"label":"Shift", "x":0, "y":4, "w":1.25}, - {"label":"ISO \\", "x":1.25, "y":4}, - {"label":"Z", "x":2.25, "y":4}, - {"label":"X", "x":3.25, "y":4}, - {"label":"C", "x":4.25, "y":4}, - {"label":"V", "x":5.25, "y":4}, - {"label":"B", "x":6.25, "y":4}, - {"label":"N", "x":7.25, "y":4}, - {"label":"M", "x":8.25, "y":4}, - {"label":",", "x":9.25, "y":4}, - {"label":".", "x":10.25, "y":4}, - {"label":"/", "x":11.25, "y":4}, - {"label":"Shift", "x":12.25, "y":4, "w":1.75}, - {"label":"Up", "x":14, "y":4}, - {"label":"TT(2)", "x":15, "y":4}, - {"label":"Ctrl", "x":0, "y":5, "w":1.25}, - {"label":"GUI", "x":1.25, "y":5, "w":1.25}, - {"label":"Alt", "x":2.5, "y":5, "w":1.25}, - {"label":"Space", "x":3.75, "y":5, "w":6.25}, - {"label":"Alt", "x":10, "y":5}, - {"label":"Fn", "x":11, "y":5}, - {"label":"Ctrl", "x":12, "y":5}, - {"label":"Left", "x":13, "y":5}, - {"label":"Down", "x":14, "y":5}, - {"label":"Right", "x":15, "y":5} - ] - } - } -} diff --git a/keyboards/handwired/bluepill/bluepill70/led.c b/keyboards/handwired/bluepill/bluepill70/led.c deleted file mode 100644 index 81437fb5ecf..00000000000 --- a/keyboards/handwired/bluepill/bluepill70/led.c +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include "led.h" - - -void led_set(uint8_t usb_led){ - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -/* - * scan matrix - */ -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "wait.h" - -//#include "pwm.c" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif -static uint8_t debouncing = DEBOUNCE; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -inline uint8_t matrix_rows(void){ - return MATRIX_ROWS; -} - -inline uint8_t matrix_cols(void){ - return MATRIX_COLS; -} - -/* generic STM32F103C8T6 board */ -#ifdef BOARD_GENERIC_STM32_F103 -// This could be removed, only used now in matrix_init() -#define LED_ON() do { palClearPad(GPIOA, 1) ;} while (0) -#define LED_OFF() do { palSetPad(GPIOA, 1); } while (0) -#endif - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void matrix_init(void) -{ - // initialize row and col - unselect_rows(); - init_cols(); - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - //debug - debug_matrix = true; - LED_ON(); - wait_ms(500); - LED_OFF(); - - matrix_init_quantum(); -} - -uint8_t matrix_scan(void){ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - select_row(i); - wait_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i] != cols) { - matrix_debouncing[i] = cols; - if (debouncing) { - debug("bounce!: "); debug_hex(debouncing); debug("\n"); - } - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - wait_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - matrix_scan_quantum(); - return 1; -} - -inline bool matrix_is_on(uint8_t row, uint8_t col){ - return (matrix[row] & ((matrix_row_t)1< - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.h b/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.h deleted file mode 100644 index 75bb848fd07..00000000000 --- a/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a Generic STM32F103 board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC_STM32_F103 -#define BOARD_NAME "Generic STM32F103x board" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F103xB - -/* - * IO pins assignments - */ - -/* on-board */ - -#define GPIOC_LED 13 -#define GPIOD_OSC_IN 0 -#define GPIOD_OSC_OUT 1 - -/* Backlighting */ - -/*#define GPIOC_BACKLIGHT_PIN 15*/ - -/* In case your board has a "USB enable" hardware - controlled by a pin, define it here. (It could be just - a 1.5k resistor connected to D+ line.) -*/ -/* -#define GPIOB_USB_DISC 10 -*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB10 - Push Pull output (USB switch). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC13 - Push Pull output (LED). - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -/* The point is that most of the generic STM32F103* boards - have a 1.5k resistor connected on one end to the D+ line - and on the other end to some pin. Or even a slightly more - complicated "USB enable" circuit, controlled by a pin. - That should go here. - - However on some boards (e.g. one that I have), there's no - such hardware. In which case it's better to not do anything. -*/ -/* -#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); - -/* - * USB bus de-activation macro, required by the USB driver. - */ -/* -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) -*/ -#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.mk b/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.mk deleted file mode 100644 index 6b8b312fd9f..00000000000 --- a/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103 diff --git a/keyboards/handwired/bluepill/config.h b/keyboards/handwired/bluepill/config.h deleted file mode 100644 index 6d583b98966..00000000000 --- a/keyboards/handwired/bluepill/config.h +++ /dev/null @@ -1,53 +0,0 @@ -/* -Copyright 2015 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -// Modified by Xydane -#define DEBOUNCE 1 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* Backlighting include */ -/*#define BACKLIGHT_PIN 19 -#define BACKLIGHT_LEVELS 5 -#define BACKLIGHT_BREATHING -#define BREATHING_PERIOD 6*/ -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION \ No newline at end of file diff --git a/keyboards/handwired/bluepill/keymaps/default/keymap.c b/keyboards/handwired/bluepill/keymaps/default/keymap.c deleted file mode 100644 index 870a530f9e3..00000000000 --- a/keyboards/handwired/bluepill/keymaps/default/keymap.c +++ /dev/null @@ -1,69 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -// Define layer names -#define _NORMAL 0 -#define _FNONE 1 -#define _FNTWO 2 - -// Highly Modified by Xydane -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NORMAL] = LAYOUT_seventy_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCREEN,KC_HOME, KC_END, \ -KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DELETE, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_SLASH,KC_PGDOWN, \ - KC_LSPO, XXXXXXX,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSPC,KC_UP, TT(2), \ - KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT ), - - [_FNONE] = LAYOUT_seventy_ansi( - KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_P0, KC_PDOT,KC_PENT, KC_PSLS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS ), - - [_FNTWO] = LAYOUT_seventy_ansi( - KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE,KC_VOLD,KC_VOLU,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, XXXXXXX, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_P0, KC_PDOT,KC_PENT, KC_PSLS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS ), -}; - -/* Layer based ilumination, just binary */ -layer_state_t layer_state_set_user(layer_state_t state) { - switch (get_highest_layer(state)) { - case _FNONE: - palSetPad(GPIOA, 0); //OFF Color A - palClearPad(GPIOA, 1); //ON Color B - break; - case _FNTWO: - palClearPad(GPIOA, 0); //ON Color A - palClearPad(GPIOA, 1); //ON Color B - break; - default: // for any other layers, or the default layer - palClearPad(GPIOA, 0); //ON Color A - palSetPad(GPIOA, 1); //OFF Color B - break; - } - return state; -} diff --git a/keyboards/handwired/bluepill/keymaps/iso/keymap.c b/keyboards/handwired/bluepill/keymaps/iso/keymap.c deleted file mode 100644 index 072f430fbdd..00000000000 --- a/keyboards/handwired/bluepill/keymaps/iso/keymap.c +++ /dev/null @@ -1,69 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -// Define layer names -#define _NORMAL 0 -#define _FNONE 1 -#define _FNTWO 2 - -// Highly Modified by Xydane -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_NORMAL] = LAYOUT_seventy_iso( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCREEN,KC_HOME, KC_END, \ -KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DELETE, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT,KC_PGDOWN, \ - KC_LSPO, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSPC,KC_UP, TT(2), \ - KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT ), - - [_FNONE] = LAYOUT_seventy_iso( - KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU, KC_TRNS,KC_TRNS,KC_NLCK, KC_CALC, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_P0, KC_PDOT,KC_PENT, KC_PSLS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS ), - - [_FNTWO] = LAYOUT_seventy_iso( - KC_TRNS, KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, KC_TRNS,KC_MUTE,KC_VOLD,KC_VOLU, KC_TRNS,KC_TRNS,KC_NLCK, KC_CALC, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P7, KC_P8, KC_P9, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_P0, KC_PDOT,KC_PENT, KC_PSLS, KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS ), -}; - -/* Layer based ilumination, just binary */ -uint32_t layer_state_set_user(uint32_t state) { - switch (biton32(state)) { - case _FNONE: - palSetPad(GPIOA, 0); //OFF Color A - palClearPad(GPIOA, 1); //ON Color B - break; - case _FNTWO: - palClearPad(GPIOA, 0); //ON Color A - palClearPad(GPIOA, 1); //ON Color B - break; - default: // for any other layers, or the default layer - palClearPad(GPIOA, 0); //ON Color A - palSetPad(GPIOA, 1); //OFF Color B - break; - } - return state; -} diff --git a/keyboards/handwired/bluepill/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/handwired/bluepill/ld/STM32F103x8_stm32duino_bootloader.ld deleted file mode 100644 index 23e44bd63af..00000000000 --- a/keyboards/handwired/bluepill/ld/STM32F103x8_stm32duino_bootloader.ld +++ /dev/null @@ -1,85 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * ST32F103xB memory setup for use with the maplemini bootloader. - */ -MEMORY -{ - flash0 : org = 0x08002000, len = 128k - 0x2000 - flash1 : org = 0x00000000, len = 0 - flash2 : org = 0x00000000, len = 0 - flash3 : org = 0x00000000, len = 0 - flash4 : org = 0x00000000, len = 0 - flash5 : org = 0x00000000, len = 0 - flash6 : org = 0x00000000, len = 0 - flash7 : org = 0x00000000, len = 0 - ram0 : org = 0x20000000, len = 20k - ram1 : org = 0x00000000, len = 0 - ram2 : org = 0x00000000, len = 0 - ram3 : org = 0x00000000, len = 0 - ram4 : org = 0x00000000, len = 0 - ram5 : org = 0x00000000, len = 0 - ram6 : org = 0x00000000, len = 0 - ram7 : org = 0x00000000, len = 0 -} - -/* For each data/text section two region are defined, a virtual region - and a load region (_LMA suffix).*/ - -/* Flash region to be used for exception vectors.*/ -REGION_ALIAS("VECTORS_FLASH", flash0); -REGION_ALIAS("VECTORS_FLASH_LMA", flash0); - -/* Flash region to be used for constructors and destructors.*/ -REGION_ALIAS("XTORS_FLASH", flash0); -REGION_ALIAS("XTORS_FLASH_LMA", flash0); - -/* Flash region to be used for code text.*/ -REGION_ALIAS("TEXT_FLASH", flash0); -REGION_ALIAS("TEXT_FLASH_LMA", flash0); - -/* Flash region to be used for read only data.*/ -REGION_ALIAS("RODATA_FLASH", flash0); -REGION_ALIAS("RODATA_FLASH_LMA", flash0); - -/* Flash region to be used for various.*/ -REGION_ALIAS("VARIOUS_FLASH", flash0); -REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); - -/* Flash region to be used for RAM(n) initialization data.*/ -REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); - -/* RAM region to be used for Main stack. This stack accommodates the processing - of all exceptions and interrupts.*/ -REGION_ALIAS("MAIN_STACK_RAM", ram0); - -/* RAM region to be used for the process stack. This is the stack used by - the main() function.*/ -REGION_ALIAS("PROCESS_STACK_RAM", ram0); - -/* RAM region to be used for data segment.*/ -REGION_ALIAS("DATA_RAM", ram0); -REGION_ALIAS("DATA_RAM_LMA", flash0); - -/* RAM region to be used for BSS segment.*/ -REGION_ALIAS("BSS_RAM", ram0); - -/* RAM region to be used for the default heap.*/ -REGION_ALIAS("HEAP_RAM", ram0); - -/* Generic rules inclusion.*/ -INCLUDE rules.ld diff --git a/keyboards/handwired/bluepill/readme.md b/keyboards/handwired/bluepill/readme.md deleted file mode 100644 index b8ca96992cf..00000000000 --- a/keyboards/handwired/bluepill/readme.md +++ /dev/null @@ -1,60 +0,0 @@ - -# BluePill handwired - -Keyboards using a BluePill controller (generic Chinese STM32F103C8T6) and based on the [KC64 of Xydane](https://github.com/Xydane/qmk_firmware). - -Keyboard Maintainer: [FPazos](https://github.com/fpazos), but I hope to leave the project in better hands. -Hardware Supported: Bluepill STM32F103C8T6 -Hardware Availability: Everywhere - -Make example for BluePill70 (after setting up your build environment): - - make handwired/bluepill/bluepill70:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - -Read everything before using it. - -## Introduction - -First of all thanks to [Xydane](https://github.com/Xydane) at [GeekHack](https://geekhack.org/) for his advice and his repository, without it you couldn't be reading this. - -That's was an attempt to create a firmware using an STM32F103C8T6, and in a "future", also developing a revision for split keyboards. But... -As I'm mainly a web developer I didn't even get to debug the controller, not to speak about ChibiOS. So I just structured everything, created a working 70% layout and leave the project to someone with more knowledge and patience. - -## Resistor fix - -If you want to use the Bluepill USB port, it's very likely that you need to solder a 1.8 kΩ between PA12 and 3.3V. That depends on the PC's motherboard but I needed, more info [here](https://wiki.stm32duino.com/index.php?title=Blue_Pill). - -## No bootloader - -Neither Xydane or I used the bootloader, the code for it is commented and you can use it if you want. I didn't achieve to run it and just used a serial programmer (FTDI, ST-LINK). - -## Adding layouts and revisions - -If you want to create new layouts just add them to the keymaps folder. If you prefer to develop a more complex revision just copy the bluepill70 folder, rename it and create a new keymap in /keymap.c (I tried to divide the project even more but it didn't worked). - -## Pinout - -That's the pinout; - - A5 A15 A10 A9 A8 B15 B14 B13 B12 B11 B10 B1 B0 A7 A6 - B9 ESC| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10| F11| F12| PSC| PGU| PGD - B8 GRA| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | ' | ¡ | BCKS | DEL - B7 TAB| Q | W | E | R | T | Y | U | I | O | P | ` | + | | HOM - B6 CAP| A | S | D | F | G | H | J | K | L | Ñ | ´ | Ç | ENTER | END - B5 LSI| < | Z | X | C | V | B | N | M | , | . | - | RSHIF | UP | FNT - A4 LCT| WIN| ALT| ESPACE | ALG| FN | RCT| LEF| DOW| RIG - -And the wiring: -ISO -![Wiring](https://i.imgur.com/ZCaxVzs.jpg) -ANSI -![Wiring](https://i.imgur.com/dBUJCdD.jpg) - -It also uses: -PC13: Caps Lock led. - -Backlight dual color leds, my version is for common anode that's more common, for leds with common anode just replace the palSetPad with palClearPad and viceversa. -PA1: Backlight color A. -PA0: Backlight color B. diff --git a/keyboards/handwired/bluepill/rules.mk b/keyboards/handwired/bluepill/rules.mk deleted file mode 100644 index 38bacae34da..00000000000 --- a/keyboards/handwired/bluepill/rules.mk +++ /dev/null @@ -1,10 +0,0 @@ -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = yes # Custom matrix file -MOUSEKEY_ENABLE = no - -DEFAULT_FOLDER = handwired/bluepill/bluepill70 \ No newline at end of file From 34446b79d7a17ba6e753d39956ebb5e871618d84 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 4 Jan 2021 08:45:43 +1100 Subject: [PATCH 023/145] Split up QWIIC_ENABLE to use QWIIC_DRIVERS as well, with yes/no for enable flag. (#11426) --- drivers/qwiic/qwiic.mk | 9 +++++---- keyboards/boston_meetup/2019/rules.mk | 3 ++- keyboards/cannonkeys/satisfaction75/rules.mk | 5 +++-- keyboards/hadron/ver3/rules.mk | 3 ++- 4 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk index b23c25657de..164bd721081 100644 --- a/drivers/qwiic/qwiic.mk +++ b/drivers/qwiic/qwiic.mk @@ -1,16 +1,17 @@ -ifneq ($(strip $(QWIIC_ENABLE)),) +ifeq ($(strip $(QWIIC_ENABLE)),yes) COMMON_VPATH += $(DRIVER_PATH)/qwiic OPT_DEFS += -DQWIIC_ENABLE SRC += qwiic.c QUANTUM_LIB_SRC += i2c_master.c -endif -ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),) +ifneq ($(filter JOYSTIIC, $(QWIIC_DRIVERS)),) OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE SRC += joystiic.c endif -ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),) +ifneq ($(filter MICRO_OLED, $(QWIIC_DRIVERS)),) OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE SRC += micro_oled.c endif + +endif diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk index 7b9df20a884..c79ce4b441a 100644 --- a/keyboards/boston_meetup/2019/rules.mk +++ b/keyboards/boston_meetup/2019/rules.mk @@ -19,5 +19,6 @@ RGBLIGHT_ENABLE = no RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 HAPTIC_ENABLE += DRV2605L -QWIIC_ENABLE += MICRO_OLED +QWIIC_ENABLE = yes +QWIIC_DRIVERS += MICRO_OLED # SERIAL_LINK_ENABLE = yes diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index 3a48d3ebfd2..e0f646ccc36 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -19,12 +19,13 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = no # Custom matrix file ENCODER_ENABLE = yes -QWIIC_ENABLE += MICRO_OLED +QWIIC_ENABLE = yes +QWIIC_DRIVERS += MICRO_OLED #BACKLIGHT_ENABLE = yes DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1 -# Wildcard to allow APM32 MCU +# Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index ae7f67862af..62d7fb09e50 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -19,6 +19,7 @@ RGBLIGHT_ENABLE = yes RGB_MATRIX_ENABLE = no # once arm_rgb is implemented RGB_MATRIX_DRIVER = WS2812 HAPTIC_ENABLE += DRV2605L -QWIIC_ENABLE += MICRO_OLED +QWIIC_ENABLE = yes +QWIIC_DRIVERS += MICRO_OLED ENCODER_ENABLER = yes # SERIAL_LINK_ENABLE = yes From ac5a1ccffb934f96d6fc3ae07a5b9581df8e8e5e Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 3 Jan 2021 15:34:04 -0800 Subject: [PATCH 024/145] fix clueboards --- keyboards/clueboard/2x1800/2019/info.json | 2 +- keyboards/clueboard/66_hotswap/gen1/rules.mk | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/clueboard/2x1800/2019/info.json b/keyboards/clueboard/2x1800/2019/info.json index 1d6d8c6ba04..96af671a8bb 100644 --- a/keyboards/clueboard/2x1800/2019/info.json +++ b/keyboards/clueboard/2x1800/2019/info.json @@ -16,7 +16,7 @@ "midi": false, "mousekey": true, "nkro": true, - "rgblight": true, + "rgblight": false, "unicode": false }, "matrix_pins": { diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index 7e85acec655..f298df1677c 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,6 +1,7 @@ # MCU name MCU = STM32F303 BOARD = QMK_PROTON_C +LED_MATRIX_DRIVER = IS31FL3731 # project specific files SRC = led.c From 5b2feecdf3755fce58d8b04c45dae0aec9c5cd1b Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 3 Jan 2021 15:44:50 -0800 Subject: [PATCH 025/145] fix lizard_trick/tenkey_plusplus/info.json --- keyboards/lizard_trick/tenkey_plusplus/info.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/lizard_trick/tenkey_plusplus/info.json b/keyboards/lizard_trick/tenkey_plusplus/info.json index b81f83763c7..cad5dd75db0 100644 --- a/keyboards/lizard_trick/tenkey_plusplus/info.json +++ b/keyboards/lizard_trick/tenkey_plusplus/info.json @@ -5,8 +5,8 @@ "width": 4, "height": 5, "layouts": { - "default": { - "LAYOUT": [ + "LAYOUT": { + "layout": [ {"label": "Mute", "x": 0, "y": 0, "w": 1.3}, {"label": "MDPL", "x": 1.3, "y": 0, "w": 1.4}, {"label": "MDNX", "x": 2.7, "y": 0, "w": 1.3}, From 6daa204363dfaa7f31d935a9913d6b35ec22e971 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 3 Jan 2021 15:45:06 -0800 Subject: [PATCH 026/145] fix keyboards with apostrophes in their names --- lib/python/qmk/cli/generate/config_h.py | 4 ++-- lib/python/qmk/info.py | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index e160ffea83c..09aa0041f4d 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -45,7 +45,7 @@ def keyboard_name(keyboard_name): #ifndef PRODUCT # define PRODUCT %s #endif // PRODUCT -""" % (keyboard_name, keyboard_name) +""" % (keyboard_name.replace("'", ""), keyboard_name.replace("'", "")) def manufacturer(manufacturer): @@ -55,7 +55,7 @@ def manufacturer(manufacturer): #ifndef MANUFACTURER # define MANUFACTURER %s #endif // MANUFACTURER -""" % (manufacturer) +""" % (manufacturer.replace("'", "")) def direct_pins(direct_pins): diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 2954a17e09b..4611874e85c 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -345,7 +345,7 @@ def _merge_layouts(info_data, new_info_data): else: # Pull in layouts that have matrix data missing_matrix = False - for key in layout_json['layout']: + for key in layout_json.get('layout', {}): if 'matrix' not in key: missing_matrix = True From 25e972e8a41909f88ce66a7b8e9ac3f744425156 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 5 Jan 2021 07:36:02 +1100 Subject: [PATCH 027/145] Fix up build dependencies. (#11435) --- build_keyboard.mk | 12 +++++++++++- tmk_core/rules.mk | 8 ++++---- 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index d9bb2b92e23..9685d1f6320 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -319,6 +319,10 @@ $(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) $(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES) bin/qmk generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h +generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h + +.INTERMEDIATE : generated-files + # project specific files SRC += $(KEYBOARD_SRC) \ $(KEYMAP_C) \ @@ -393,10 +397,16 @@ all: echo "skipped" >&2 endif -build: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h elf cpfirmware +build: elf cpfirmware check-size: build check-md5: build objs-size: build include show_options.mk include $(TMK_PATH)/rules.mk + +# Ensure we have generated files available for each of the objects +define GEN_FILES +$1: generated-files +endef +$(foreach O,$(OBJ),$(eval $(call GEN_FILES,$(patsubst %.a,%.o,$(O))))) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index b595ddb1db4..a77e55dd13a 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -324,27 +324,27 @@ $1_CXXFLAGS = $$(ALL_CXXFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) $ $1_ASFLAGS = $$(ALL_ASFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) # Compile: create object files from C source files. -$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) +$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD) $$(eval CMD := $$(CC) -c $$($1_CFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) # Compile: create object files from C++ source files. -$1/%.o : %.cpp $1/%.d $1/cxxflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) +$1/%.o : %.cpp $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) -$1/%.o : %.cc $1/%.d $1/cxxflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) +$1/%.o : %.cc $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) @mkdir -p $$(@D) @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) @$$(BUILD_CMD) # Assemble: create object files from assembler source files. -$1/%.o : %.S $1/asflags.txt $1/compiler.txt $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h | $(BEGIN) +$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN) @mkdir -p $$(@D) @$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD) $$(eval CMD=$$(CC) -c $$($1_ASFLAGS) $$< -o $$@) From e7db582e356a961ba608ef441f201d879ec8d740 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Tue, 5 Jan 2021 05:53:37 +0000 Subject: [PATCH 028/145] Set avr's bootloader_jump function to be weak (#11418) Co-authored-by: Dasky --- tmk_core/common/avr/bootloader.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index a1db55da934..c0272903b83 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -77,7 +77,7 @@ uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); * * FIXME: needs doc */ -void bootloader_jump(void) { +__attribute__((weak)) void bootloader_jump(void) { #if !defined(BOOTLOADER_SIZE) uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); From 5846445f48b8c8eba547458a6853ec21ea69f94a Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 5 Jan 2021 11:41:23 -0800 Subject: [PATCH 029/145] Fix compiling squiggle/rev1 --- keyboards/squiggle/rev1/rules.mk | 24 ++++++++++++++++++++++++ keyboards/squiggle/rules.mk | 25 ------------------------- 2 files changed, 24 insertions(+), 25 deletions(-) create mode 100644 keyboards/squiggle/rev1/rules.mk diff --git a/keyboards/squiggle/rev1/rules.mk b/keyboards/squiggle/rev1/rules.mk new file mode 100644 index 00000000000..45309a896e7 --- /dev/null +++ b/keyboards/squiggle/rev1/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +BOOTLOADER = caterina + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + +SPLIT_KEYBOARD = yes + +LAYOUTS = split_3x5_3 diff --git a/keyboards/squiggle/rules.mk b/keyboards/squiggle/rules.mk index aea3a1b4fa9..4f44ddbb73f 100644 --- a/keyboards/squiggle/rules.mk +++ b/keyboards/squiggle/rules.mk @@ -1,26 +1 @@ -# MCU name -MCU = atmega32u4 - -BOOTLOADER = caterina - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support -BLUETOOTH_ENABLE = no # Enable Bluetooth -AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - -SPLIT_KEYBOARD = yes - DEFAULT_FOLDER = squiggle/rev1 - -LAYOUTS = split_3x5_3 From f9269035feba505796b97bd7ecd314bfad0f0356 Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 5 Jan 2021 16:44:40 -0800 Subject: [PATCH 030/145] Fix compiling treadstone32/rev1 (#11447) * fix compiling treadstone32/rev1 * move most options back to top level rules.mk --- keyboards/treadstone32/rev1/rules.mk | 9 +++++++++ keyboards/treadstone32/rules.mk | 10 ---------- 2 files changed, 9 insertions(+), 10 deletions(-) create mode 100644 keyboards/treadstone32/rev1/rules.mk diff --git a/keyboards/treadstone32/rev1/rules.mk b/keyboards/treadstone32/rev1/rules.mk new file mode 100644 index 00000000000..4d55309168f --- /dev/null +++ b/keyboards/treadstone32/rev1/rules.mk @@ -0,0 +1,9 @@ +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu diff --git a/keyboards/treadstone32/rules.mk b/keyboards/treadstone32/rules.mk index 64ca6a72141..ef45032dae1 100644 --- a/keyboards/treadstone32/rules.mk +++ b/keyboards/treadstone32/rules.mk @@ -1,16 +1,6 @@ # MCU name MCU = atmega32u4 -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # From ededff8556daff544633cb143cb6d939afd09014 Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 1 Dec 2020 12:52:02 -0800 Subject: [PATCH 031/145] validate keyboard data with jsonschema --- lib/python/qmk/cli/generate/info_json.py | 2 +- lib/python/qmk/cli/generate/rules_mk.py | 13 ++ lib/python/qmk/info.py | 151 +++++++++++++++++++++-- requirements.txt | 1 + 4 files changed, 155 insertions(+), 12 deletions(-) diff --git a/lib/python/qmk/cli/generate/info_json.py b/lib/python/qmk/cli/generate/info_json.py index 7e6654e45d4..fba4b1c0140 100755 --- a/lib/python/qmk/cli/generate/info_json.py +++ b/lib/python/qmk/cli/generate/info_json.py @@ -39,7 +39,7 @@ def generate_info_json(cli): pared_down_json[key] = kb_info_json[key] pared_down_json['layouts'] = {} - if 'layouts' in pared_down_json: + if 'layouts' in kb_info_json: for layout_name, layout in kb_info_json['layouts'].items(): pared_down_json['layouts'][layout_name] = {} pared_down_json['layouts'][layout_name]['key_count'] = layout.get('key_count', len(layout['layout'])) diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index 4268ae047b4..72ed3c45fa4 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -6,6 +6,10 @@ from qmk.decorators import automagic_keyboard, automagic_keymap from qmk.info import info_json from qmk.path import is_keyboard, normpath +info_to_rules = { + 'bootloader': 'BOOTLOADER', + 'processor': 'MCU' +} @cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") @@ -30,6 +34,10 @@ def generate_rules_mk(cli): kb_info_json = info_json(cli.config.generate_rules_mk.keyboard) rules_mk_lines = ['# This file was generated by `qmk generate-rules-mk`. Do not edit or copy.', ''] + # Bring in settings + for info_key, rule_key in info_to_rules.items(): + rules_mk_lines.append(f'{rule_key} := {kb_info_json[info_key]}') + # Find features that should be enabled if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): @@ -37,6 +45,11 @@ def generate_rules_mk(cli): enabled = 'yes' if enabled else 'no' rules_mk_lines.append(f'{feature}_ENABLE := {enabled}') + # Set the LED driver + if 'led_matrix' in kb_info_json and 'driver' in kb_info_json['led_matrix']: + driver = kb_info_json['led_matrix']['driver'] + rules_mk_lines.append(f'LED_MATRIX_DRIVER = {driver}') + # Add community layouts if 'community_layouts' in kb_info_json: rules_mk_lines.append(f'LAYOUTS = {" ".join(kb_info_json["community_layouts"])}') diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 4611874e85c..1cf12190d6c 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -4,6 +4,7 @@ import json from glob import glob from pathlib import Path +import jsonschema from milc import cli from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS, LED_INDICATORS @@ -13,6 +14,17 @@ from qmk.keymap import list_keymaps from qmk.makefile import parse_rules_mk_file from qmk.math import compute +led_matrix_properties = { + 'driver_count': 'LED_DRIVER_COUNT', + 'driver_addr1': 'LED_DRIVER_ADDR_1', + 'driver_addr2': 'LED_DRIVER_ADDR_2', + 'driver_addr3': 'LED_DRIVER_ADDR_3', + 'driver_addr4': 'LED_DRIVER_ADDR_4', + 'led_count': 'LED_DRIVER_LED_COUNT', + 'timeout': 'ISSI_TIMEOUT', + 'persistence': 'ISSI_PERSISTENCE' +} + rgblight_properties = { 'led_count': 'RGBLED_NUM', 'pin': 'RGB_DI_PIN', @@ -80,6 +92,15 @@ def info_json(keyboard): info_data = _extract_config_h(info_data) info_data = _extract_rules_mk(info_data) + # Validate against the jsonschema + try: + keyboard_api_validate(info_data) + + except jsonschema.ValidationError as e: + cli.log.error('Invalid info.json data: %s', e.message) + print(dir(e)) + exit() + # Make sure we have at least one layout if not info_data.get('layouts'): _log_error(info_data, 'No LAYOUTs defined! Need at least one layout defined in the keyboard.h or info.json.') @@ -102,6 +123,50 @@ def info_json(keyboard): return info_data +def _json_load(json_file): + """Load a json file from disk. + + Note: file must be a Path object. + """ + try: + return json.load(json_file.open()) + + except json.decoder.JSONDecodeError as e: + cli.log.error('Invalid JSON encountered attempting to load {fg_cyan}%s{fg_reset}:\n\t{fg_red}%s', json_file, e) + exit(1) + + +def _jsonschema(schema_name): + """Read a jsonschema file from disk. + """ + schema_path = Path(f'data/schemas/{schema_name}.jsonschema') + + if not schema_path.exists(): + schema_path = Path('data/schemas/false.jsonschema') + + return _json_load(schema_path) + + +def keyboard_validate(data): + """Validates data against the keyboard jsonschema. + """ + schema = _jsonschema('keyboard') + validator = jsonschema.Draft7Validator(schema).validate + + return validator(data) + + +def keyboard_api_validate(data): + """Validates data against the api_keyboard jsonschema. + """ + base = _jsonschema('keyboard') + relative = _jsonschema('api_keyboard') + resolver = jsonschema.RefResolver.from_schema(base) + validator = jsonschema.Draft7Validator(relative, resolver=resolver).validate + + return validator(data) + + def _extract_debounce(info_data, config_c): """Handle debounce. """ @@ -109,7 +174,7 @@ def _extract_debounce(info_data, config_c): _log_warning(info_data, 'Debounce is specified in both info.json and config.h, the config.h value wins.') if 'DEBOUNCE' in config_c: - info_data['debounce'] = config_c.get('DEBOUNCE') + info_data['debounce'] = int(config_c['DEBOUNCE']) return info_data @@ -181,8 +246,36 @@ def _extract_features(info_data, rules): return info_data +def _extract_led_drivers(info_data, rules): + """Find all the LED drivers set in rules.mk. + """ + if 'LED_MATRIX_DRIVER' in rules: + if 'led_matrix' not in info_data: + info_data['led_matrix'] = {} + + if info_data['led_matrix'].get('driver'): + _log_warning(info_data, 'LED Matrix driver is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['led_matrix']['driver'] = rules['LED_MATRIX_DRIVER'] + + return info_data + + +def _extract_led_matrix(info_data, config_c): + """Handle the led_matrix configuration. + """ + led_matrix = info_data.get('led_matrix', {}) + + for json_key, config_key in led_matrix_properties.items(): + if config_key in config_c: + if json_key in led_matrix: + _log_warning(info_data, 'LED Matrix: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) + + led_matrix[json_key] = config_c[config_key] + + def _extract_rgblight(info_data, config_c): - """Handle the rgblight configuration + """Handle the rgblight configuration. """ rgblight = info_data.get('rgblight', {}) animations = rgblight.get('animations', {}) @@ -303,6 +396,7 @@ def _extract_config_h(info_data): _extract_indicators(info_data, config_c) _extract_matrix_info(info_data, config_c) _extract_usb_info(info_data, config_c) + _extract_led_matrix(info_data, config_c) _extract_rgblight(info_data, config_c) return info_data @@ -326,6 +420,7 @@ def _extract_rules_mk(info_data): _extract_community_layouts(info_data, rules) _extract_features(info_data, rules) + _extract_led_drivers(info_data, rules) return info_data @@ -412,13 +507,28 @@ def arm_processor_rules(info_data, rules): """Setup the default info for an ARM board. """ info_data['processor_type'] = 'arm' - info_data['bootloader'] = rules['BOOTLOADER'] if 'BOOTLOADER' in rules else 'unknown' - info_data['processor'] = rules['MCU'] if 'MCU' in rules else 'unknown' info_data['protocol'] = 'ChibiOS' - if info_data['bootloader'] == 'unknown': + if 'MCU' in rules: + if 'processor' in info_data: + _log_warning(info_data, 'Processor/MCU is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['processor'] = rules['MCU'] + + elif 'processor' not in info_data: + info_data['processor'] = 'unknown' + + if 'BOOTLOADER' in rules: + if 'bootloader' in info_data: + _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['bootloader'] = rules['BOOTLOADER'] + + else: if 'STM32' in info_data['processor']: info_data['bootloader'] = 'stm32-dfu' + else: + info_data['bootloader'] = 'unknown' if 'STM32' in info_data['processor']: info_data['platform'] = 'STM32' @@ -436,9 +546,25 @@ def avr_processor_rules(info_data, rules): info_data['processor_type'] = 'avr' info_data['bootloader'] = rules['BOOTLOADER'] if 'BOOTLOADER' in rules else 'atmel-dfu' info_data['platform'] = rules['ARCH'] if 'ARCH' in rules else 'unknown' - info_data['processor'] = rules['MCU'] if 'MCU' in rules else 'unknown' info_data['protocol'] = 'V-USB' if rules.get('MCU') in VUSB_PROCESSORS else 'LUFA' + if 'MCU' in rules: + if 'processor' in info_data: + _log_warning(info_data, 'Processor/MCU is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['processor'] = rules['MCU'] + + elif 'processor' not in info_data: + info_data['processor'] = 'unknown' + + if 'BOOTLOADER' in rules: + if 'bootloader' in info_data: + _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['bootloader'] = rules['BOOTLOADER'] + else: + info_data['bootloader'] = 'atmel-dfu' + # FIXME(fauxpark/anyone): Eventually we should detect the protocol by looking at PROTOCOL inherited from mcu_selection.mk: # info_data['protocol'] = 'V-USB' if rules.get('PROTOCOL') == 'VUSB' else 'LUFA' @@ -463,10 +589,13 @@ def merge_info_jsons(keyboard, info_data): for info_file in find_info_json(keyboard): # Load and validate the JSON data try: - new_info_data = json.load(info_file.open('r')) - except Exception as e: - _log_error(info_data, "Invalid JSON in file %s: %s: %s" % (str(info_file), e.__class__.__name__, e)) - new_info_data = {} + new_info_data = _json_load(info_file) + keyboard_validate(new_info_data) + + except jsonschema.ValidationError as e: + cli.log.error('Invalid info.json data: %s', e.message) + cli.log.error('Not including file %s', info_file) + continue if not isinstance(new_info_data, dict): _log_error(info_data, "Invalid file %s, root object should be a dictionary." % (str(info_file),)) @@ -479,7 +608,7 @@ def merge_info_jsons(keyboard, info_data): # Deep merge certain keys # FIXME(skullydazed/anyone): this should be generalized more so that we can inteligently merge more than one level deep. It would be nice if we could filter on valid keys too. That may have to wait for a future where we use openapi or something. - for key in ('features', 'layout_aliases', 'matrix_pins', 'rgblight', 'usb'): + for key in ('features', 'layout_aliases', 'led_matrix', 'matrix_pins', 'rgblight', 'usb'): if key in new_info_data: if key not in info_data: info_data[key] = {} diff --git a/requirements.txt b/requirements.txt index 6e907cf8e83..f4d43da8d63 100644 --- a/requirements.txt +++ b/requirements.txt @@ -3,5 +3,6 @@ appdirs argcomplete colorama hjson +jsonschema milc pygments From 0d3aca062e3fd7a4b351a9edc42c6b36686abd4f Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 1 Dec 2020 12:52:26 -0800 Subject: [PATCH 032/145] cleanup clueboard based on latest validation work --- keyboards/clueboard/17/info.json | 9 +++++---- keyboards/clueboard/17/rules.mk | 13 ------------- keyboards/clueboard/2x1800/2018/info.json | 16 +++++++++------- keyboards/clueboard/2x1800/2018/rules.mk | 13 +------------ keyboards/clueboard/2x1800/2019/info.json | 4 +++- keyboards/clueboard/2x1800/2019/rules.mk | 13 +------------ keyboards/clueboard/60/info.json | 3 ++- keyboards/clueboard/60/rules.mk | 2 -- keyboards/clueboard/66/rev1/info.json | 15 ++++++++------- keyboards/clueboard/66/rev1/rules.mk | 13 +------------ keyboards/clueboard/66/rev2/info.json | 15 ++++++++------- keyboards/clueboard/66/rev2/rules.mk | 13 ------------- keyboards/clueboard/66/rev3/info.json | 15 ++++++++------- keyboards/clueboard/66/rev3/rules.mk | 13 ------------- keyboards/clueboard/66/rev4/info.json | 15 ++++++++------- keyboards/clueboard/66/rev4/rules.mk | 3 +-- keyboards/clueboard/66_hotswap/gen1/info.json | 12 ++++++++---- keyboards/clueboard/66_hotswap/gen1/rules.mk | 2 -- .../clueboard/66_hotswap/prototype/info.json | 15 ++++++++------- .../clueboard/66_hotswap/prototype/rules.mk | 13 ------------- keyboards/clueboard/california/info.json | 8 ++++++++ keyboards/clueboard/california/rules.mk | 12 +----------- keyboards/clueboard/card/info.json | 15 ++++++++------- keyboards/clueboard/card/rules.mk | 13 ------------- 24 files changed, 88 insertions(+), 177 deletions(-) diff --git a/keyboards/clueboard/17/info.json b/keyboards/clueboard/17/info.json index 46510c48c0c..47260572e64 100644 --- a/keyboards/clueboard/17/info.json +++ b/keyboards/clueboard/17/info.json @@ -5,6 +5,7 @@ "height": 5, "width": 4, "diode_direction": "COL2ROW", + "processor": "atmega32u4", "features": { "backlight": true, "bootmagic": false, @@ -25,11 +26,11 @@ "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "10", - "led_count": "4", + "brightness_steps": 17, + "hue_steps": 10, + "led_count": 4, "pin": "F6", - "saturation_steps": "17" + "saturation_steps": 17 }, "url": "", "usb": { diff --git a/keyboards/clueboard/17/rules.mk b/keyboards/clueboard/17/rules.mk index 75fb718e33d..d2e52d56b5b 100644 --- a/keyboards/clueboard/17/rules.mk +++ b/keyboards/clueboard/17/rules.mk @@ -1,15 +1,2 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options BACKLIGHT_DRIVER = custom diff --git a/keyboards/clueboard/2x1800/2018/info.json b/keyboards/clueboard/2x1800/2018/info.json index b671174076b..878b24ce178 100644 --- a/keyboards/clueboard/2x1800/2018/info.json +++ b/keyboards/clueboard/2x1800/2018/info.json @@ -4,7 +4,9 @@ "maintainer": "skullydazed", "height": 6.5, "width": 24, - "debounce": "5", + "processor": "at90usb1286", + "bootloader": "halfkay", + "debounce": 5, "diode_direction": "ROW2COL", "features": { "audio": true, @@ -24,18 +26,18 @@ "scroll_lock": "B6" }, "matrix_pins": { - "cols": ["D2", " D3", " D4", " D5", " D7", " E0", " E1", " B0", " E6", " B3", " B2"], - "rows": ["C0", " C1", " C2", " C3", " C7", " F7", " B1", " F2", " F3", " F4", " F5", " F6"] + "cols": ["D2", "D3", "D4", "D5", "D7", "E0", "E1", "B0", "E6", "B3", "B2"], + "rows": ["C0", "C1", "C2", "C3", "C7", "F7", "B1", "F2", "F3", "F4", "F5", "F6"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "8", - "hue_steps": "8", - "led_count": "16", + "brightness_steps": 8, + "hue_steps": 8, + "led_count": 16, "pin": "C6", - "saturation_steps": "8" + "saturation_steps": 8 }, "usb": { "pid": "0x23A0" diff --git a/keyboards/clueboard/2x1800/2018/rules.mk b/keyboards/clueboard/2x1800/2018/rules.mk index c421eb862e9..6e7633bfe01 100644 --- a/keyboards/clueboard/2x1800/2018/rules.mk +++ b/keyboards/clueboard/2x1800/2018/rules.mk @@ -1,12 +1 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = halfkay +# This file intentionally left blank diff --git a/keyboards/clueboard/2x1800/2019/info.json b/keyboards/clueboard/2x1800/2019/info.json index 96af671a8bb..26185b7a482 100644 --- a/keyboards/clueboard/2x1800/2019/info.json +++ b/keyboards/clueboard/2x1800/2019/info.json @@ -4,7 +4,9 @@ "maintainer": "skullydazed", "height": 8, "width": 24, - "debounce": "5", + "debounce": 5, + "processor": "at90usb1286", + "bootloader": "halfkay", "diode_direction": "ROW2COL", "features": { "audio": true, diff --git a/keyboards/clueboard/2x1800/2019/rules.mk b/keyboards/clueboard/2x1800/2019/rules.mk index c421eb862e9..6e7633bfe01 100644 --- a/keyboards/clueboard/2x1800/2019/rules.mk +++ b/keyboards/clueboard/2x1800/2019/rules.mk @@ -1,12 +1 @@ -# MCU name -MCU = at90usb1286 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = halfkay +# This file intentionally left blank diff --git a/keyboards/clueboard/60/info.json b/keyboards/clueboard/60/info.json index 1df0512ad3d..2da993437c4 100644 --- a/keyboards/clueboard/60/info.json +++ b/keyboards/clueboard/60/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 15, - "debounce": "6", + "debounce": 6, + "processor": "STM32F303", "diode_direction": "COL2ROW", "features": { "audio": true, diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk index 7e85acec655..6bc7eb7619f 100644 --- a/keyboards/clueboard/60/rules.mk +++ b/keyboards/clueboard/60/rules.mk @@ -1,5 +1,3 @@ -# MCU name -MCU = STM32F303 BOARD = QMK_PROTON_C # project specific files diff --git a/keyboards/clueboard/66/rev1/info.json b/keyboards/clueboard/66/rev1/info.json index f67e5baf75e..beb83b5e654 100644 --- a/keyboards/clueboard/66/rev1/info.json +++ b/keyboards/clueboard/66/rev1/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "processor": "atmega32u4", + "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, @@ -24,18 +25,18 @@ "caps_lock": "F0" }, "matrix_pins": { - "cols": ["B3", " F1", " F4", " F5", " F6", " C7", " C6", " B6", " B5", " B4", " D7", " D6", " D4", " F7", " B0", " B1"], - "rows": ["D1", " D0", " D2", " D5", " D3"] + "cols": ["B3", "F1", "F4", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "F7", "B0", "B1"], + "rows": ["D1", "D0", "D2", "D5", "D3"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "10", - "led_count": "14", + "brightness_steps": 17, + "hue_steps": 10, + "led_count": 14, "pin": "B2", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66/rev1/rules.mk b/keyboards/clueboard/66/rev1/rules.mk index 2f20507d4dd..6e7633bfe01 100644 --- a/keyboards/clueboard/66/rev1/rules.mk +++ b/keyboards/clueboard/66/rev1/rules.mk @@ -1,12 +1 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu +# This file intentionally left blank diff --git a/keyboards/clueboard/66/rev2/info.json b/keyboards/clueboard/66/rev2/info.json index 4560ec7e8d0..603558de829 100644 --- a/keyboards/clueboard/66/rev2/info.json +++ b/keyboards/clueboard/66/rev2/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "processor": "atmega32u4", + "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, @@ -24,18 +25,18 @@ "caps_lock": "B4" }, "matrix_pins": { - "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], - "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "E6", "B1"], + "rows": ["B2", "C7", "C6", "B6", "B5", "B0", "B3", "D5", "D3", "D2"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "32", - "led_count": "14", + "brightness_steps": 17, + "hue_steps": 32, + "led_count": 14, "pin": "D7", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66/rev2/rules.mk b/keyboards/clueboard/66/rev2/rules.mk index 75fb718e33d..d2e52d56b5b 100644 --- a/keyboards/clueboard/66/rev2/rules.mk +++ b/keyboards/clueboard/66/rev2/rules.mk @@ -1,15 +1,2 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options BACKLIGHT_DRIVER = custom diff --git a/keyboards/clueboard/66/rev3/info.json b/keyboards/clueboard/66/rev3/info.json index 4b9694a2bfb..d3b13bed7ad 100644 --- a/keyboards/clueboard/66/rev3/info.json +++ b/keyboards/clueboard/66/rev3/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "processor": "atmega32u4", + "debounce": 5, "diode_direction": "COL2ROW", "features": { "audio": false, @@ -24,18 +25,18 @@ "caps_lock": "B4" }, "matrix_pins": { - "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], - "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "E6", "B1"], + "rows": ["B2", "C7", "C6", "B6", "B5", "B0", "B3", "D5", "D3", "D2"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "32", - "led_count": "18", + "brightness_steps": 17, + "hue_steps": 32, + "led_count": 18, "pin": "D7", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66/rev3/rules.mk b/keyboards/clueboard/66/rev3/rules.mk index 76e161e36b2..56d1ab011fa 100644 --- a/keyboards/clueboard/66/rev3/rules.mk +++ b/keyboards/clueboard/66/rev3/rules.mk @@ -1,16 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options # comment out to disable the options. # diff --git a/keyboards/clueboard/66/rev4/info.json b/keyboards/clueboard/66/rev4/info.json index 90c721e31fc..aef1dee7aa7 100644 --- a/keyboards/clueboard/66/rev4/info.json +++ b/keyboards/clueboard/66/rev4/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "debounce": 5, + "processor": "STM32F303", "diode_direction": "COL2ROW", "features": { "audio": true, @@ -21,18 +22,18 @@ "unicode": false }, "matrix_pins": { - "cols": ["B10", " B2", " B1", " B0", " A7", " B4", " B3", " B5"], - "rows": ["B11", " A6", " A3", " A2", " A1", " B7", " B6", " C15", " C14", " C13"] + "cols": ["B10", "B2", "B1", "B0", "A7", "B4", "B3", "B5"], + "rows": ["B11", "A6", "A3", "A2", "A1", "B7", "B6", "C15", "C14", "C13"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "32", - "led_count": "18", + "brightness_steps": 17, + "hue_steps": 32, + "led_count": 18, "pin": "D7", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk index 4e157baeda1..14a7fa7b715 100644 --- a/keyboards/clueboard/66/rev4/rules.mk +++ b/keyboards/clueboard/66/rev4/rules.mk @@ -1,3 +1,2 @@ -# MCU name -MCU = STM32F303 BOARD = QMK_PROTON_C +# This file intentionally left blank diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json index 76352b0771c..18afe541268 100644 --- a/keyboards/clueboard/66_hotswap/gen1/info.json +++ b/keyboards/clueboard/66_hotswap/gen1/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "debounce": 5, + "processor": "STM32F303", "diode_direction": "COL2ROW", "features": { "audio": true, @@ -12,13 +13,16 @@ "command": true, "console": true, "extrakey": true, - "led_matrix": "IS31FL3731", + "led_matrix": true, "mousekey": true, "nkro": true }, + "led_matrix": { + "driver": "IS31FL3731" + }, "matrix_pins": { - "cols": ["B10", " B2", " B1", " B0", " A7", " B4", " B3", " B7"], - "rows": ["B11", " A6", " A3", " A2", " A1", " B5", " B6", " C15", " C14", " C13"] + "cols": ["B10", "B2", "B1", "B0", "A7", "B4", "B3", "B7"], + "rows": ["B11", "A6", "A3", "A2", "A1", "B5", "B6", "C15", "C14", "C13"] }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index f298df1677c..e23f9a4b3ce 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,5 +1,3 @@ -# MCU name -MCU = STM32F303 BOARD = QMK_PROTON_C LED_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/clueboard/66_hotswap/prototype/info.json b/keyboards/clueboard/66_hotswap/prototype/info.json index 1572223592a..0b55b3b638e 100644 --- a/keyboards/clueboard/66_hotswap/prototype/info.json +++ b/keyboards/clueboard/66_hotswap/prototype/info.json @@ -4,8 +4,9 @@ "maintainer": "skullydazed", "height": 5, "width": 16.5, - "debounce": "5", + "debounce": 5, "diode_direction": "COL2ROW", + "processor": "atmega32u4", "features": { "audio": true, "backlight": true, @@ -24,18 +25,18 @@ "caps_lock": "B4" }, "matrix_pins": { - "cols": ["F0", " F1", " F4", " F5", " F6", " F7", " E6", " B1"], - "rows": ["B2", " C7", " C6", " B6", " B5", " B0", " B3", " D5", " D3", " D2"] + "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "E6", "B1"], + "rows": ["B2", "C7", "C6", "B6", "B5", "B0", "B3", "D5", "D3", "D2"] }, "rgblight": { "animations": { "all": true }, - "brightness_steps": "17", - "hue_steps": "32", - "led_count": "26", + "brightness_steps": 17, + "hue_steps": 32, + "led_count": 26, "pin": "D7", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/66_hotswap/prototype/rules.mk b/keyboards/clueboard/66_hotswap/prototype/rules.mk index 63dd64f7c18..f144042edd2 100644 --- a/keyboards/clueboard/66_hotswap/prototype/rules.mk +++ b/keyboards/clueboard/66_hotswap/prototype/rules.mk @@ -1,16 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options # comment out to disable the options. # diff --git a/keyboards/clueboard/california/info.json b/keyboards/clueboard/california/info.json index f376643cdd7..02c06ce5138 100644 --- a/keyboards/clueboard/california/info.json +++ b/keyboards/clueboard/california/info.json @@ -2,6 +2,7 @@ "keyboard_name": "Clueboard California", "url": "", "maintainer": "skullydazed", + "processor": "STM32F303", "matrix_pins": { "direct": [ ["A10", "A9"], @@ -12,6 +13,13 @@ [null, "B2"] ] }, + "features": { + "mousekey": true, + "extrakey": true, + "console": true, + "command": true, + "audio": true + }, "usb": {"pid": "0x23B0"}, "layouts": { "LAYOUT": { diff --git a/keyboards/clueboard/california/rules.mk b/keyboards/clueboard/california/rules.mk index 11719015e9a..14a7fa7b715 100644 --- a/keyboards/clueboard/california/rules.mk +++ b/keyboards/clueboard/california/rules.mk @@ -1,12 +1,2 @@ -# MCU name -MCU = STM32F303 BOARD = QMK_PROTON_C - -## Features -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -RGBLIGHT_ENABLE = no -AUDIO_ENABLE = yes +# This file intentionally left blank diff --git a/keyboards/clueboard/card/info.json b/keyboards/clueboard/card/info.json index e46237175a7..67830c42353 100644 --- a/keyboards/clueboard/card/info.json +++ b/keyboards/clueboard/card/info.json @@ -4,7 +4,8 @@ "maintainer": "skullydazed", "height": 8, "width": 10, - "debounce": "20", + "debounce": 20, + "processor": "atmega32u4", "diode_direction": "ROW2COL", "features": { "audio": true, @@ -22,15 +23,15 @@ "unicode": false }, "matrix_pins": { - "cols": ["F1", " F7", " F6"], - "rows": ["F0", " F5", " F4", " B4"] + "cols": ["F1", "F7", "F6"], + "rows": ["F0", "F5", "F4", "B4"] }, "rgblight": { - "brightness_steps": "17", - "hue_steps": "10", - "led_count": "4", + "brightness_steps": 17, + "hue_steps": 10, + "led_count": 4, "pin": "E6", - "saturation_steps": "17" + "saturation_steps": 17 }, "usb": { "device_ver": "0x0001", diff --git a/keyboards/clueboard/card/rules.mk b/keyboards/clueboard/card/rules.mk index 75fb718e33d..d2e52d56b5b 100644 --- a/keyboards/clueboard/card/rules.mk +++ b/keyboards/clueboard/card/rules.mk @@ -1,15 +1,2 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - # Build Options BACKLIGHT_DRIVER = custom From 266a85eda0cbb63852565d0c1d7ddb24700b8c1f Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 1 Dec 2020 12:58:00 -0800 Subject: [PATCH 033/145] add missing schemas --- data/schemas/api_keyboard.jsonschema | 35 ++++ data/schemas/false.jsonschema | 1 + data/schemas/keyboard.jsonschema | 232 +++++++++++++++++++++++++++ data/schemas/true.jsonschema | 1 + 4 files changed, 269 insertions(+) create mode 100644 data/schemas/api_keyboard.jsonschema create mode 100644 data/schemas/false.jsonschema create mode 100644 data/schemas/keyboard.jsonschema create mode 100644 data/schemas/true.jsonschema diff --git a/data/schemas/api_keyboard.jsonschema b/data/schemas/api_keyboard.jsonschema new file mode 100644 index 00000000000..d570ee99908 --- /dev/null +++ b/data/schemas/api_keyboard.jsonschema @@ -0,0 +1,35 @@ +{ + "allOf": [ + { "$ref": "qmk.keyboard.v1" }, + { + "$id": "qmk.api.keyboard.v1", + "keymaps": { + "type": "string" + }, + "parse_errors": { + "type": "array", + "items": { + "type": "string" + } + }, + "parse_warnings": { + "type": "array", + "items": { + "type": "string" + } + }, + "processor_type": { + "type": "string" + }, + "protocol": { + "type": "string" + }, + "keyboard_folder": { + "type": "string" + }, + "platform": { + "type": "string" + } + } + ] +} diff --git a/data/schemas/false.jsonschema b/data/schemas/false.jsonschema new file mode 100644 index 00000000000..c508d5366f7 --- /dev/null +++ b/data/schemas/false.jsonschema @@ -0,0 +1 @@ +false diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema new file mode 100644 index 00000000000..75e792b646f --- /dev/null +++ b/data/schemas/keyboard.jsonschema @@ -0,0 +1,232 @@ +{ + "$schema": "http://json-schema.org/schema#", + "$id": "qmk.keyboard.v1", + "title": "Keyboard Information", + "type": "object", + "properties": { + "keyboard_name": { + "type": "string", + "minLength": 2, + "maxLength": 250 + }, + "maintainer": { + "type": "string", + "minLength": 2, + "maxLength": 250 + }, + "manufacturer": { + "type": "string", + "minLength": 2, + "maxLength": 250 + }, + "url": { + "type": "string", + "format": "uri" + }, + "processor": { + "type": "string", + "enum": ["MK20DX128", "MK20DX256", "MKL26Z64", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "at90usb1286", "at90usb646", "atmega16u2", "atmega328p", "atmega32a", "atmega32u2", "atmega32u4", "attiny85", "cortex-m4"] + }, + "bootloader": { + "type": "string", + "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "stm32-dfu", "stm32duino", "unknown", "USBasp"] + }, + "diode_direction": { + "type": "string", + "enum": ["COL2ROW", "ROW2COL"] + }, + "debounce": { + "type": "number", + "min": 0, + "multipleOf": 1 + }, + "height": { + "type": "number", + "min": 0.25 + }, + "width": { + "type": "number", + "min": 0.25 + }, + "community_layouts": { + "type": "array", + "items": { + "type": "string", + "minLength": 2, + "pattern": "^[0-9a-z_]*$" + } + }, + "features": { + "type": "object", + "additionalProperties": {"type": "boolean"} + }, + "indicators": { + "type": "object", + "properties": { + "caps_lock": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + "num_lock": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + "scroll_lock": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + } + } + }, + "layout_aliases": { + "type": "object", + "additionalProperties": { + "type": "string", + "pattern": "^LAYOUT_[0-9a-z_]*$" + } + }, + "layouts": { + "type": "object", + "additionalProperties": { + "type": "object", + "additionalProperties": false, + "properties": { + "c_macro": { + "type": "boolean" + }, + "key_count": { + "type": "number", + "min": 0, + "multipleOf": 1 + }, + "layout": { + "type": "array", + "items": { + "type": "object", + "additionalProperties": false, + "properties": { + "label": {"type": "string"}, + "matrix": { + "type": "array", + "minItems": 2, + "maxItems": 2, + "items": { + "type": "number", + "min": 0, + "multipleOf": 1 + } + }, + "h": { + "type": "number", + "min": 0.25 + }, + "w": { + "type": "number", + "min": 0.25 + }, + "x": { + "type": "number", + "min": 0 + }, + "y": { + "type": "number", + "min": 0 + } + } + } + } + } + } + }, + "matrix_pins": { + "type": "object", + "additionalProperties": false, + "properties": { + "direct": { + "type": "array", + "items": { + "type": "array", + "items": { + "oneOf": [ + { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + { + "type": "null" + } + ] + } + } + }, + "cols": { + "type": "array", + "items": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + } + }, + "rows": { + "type": "array", + "items": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + } + } + } + }, + "rgblight": { + "type": "object", + "additionalProperties": false, + "properties": { + "animations": { + "type": "object", + "additionalProperties": { + "type": "boolean" + } + }, + "brightness_steps": { + "type": "number", + "min": 0, + "multipleOf": 1 + }, + "hue_steps": { + "type": "number", + "min": 0, + "multipleOf": 1 + }, + "led_count": { + "type": "number", + "min": 0, + "multipleOf": 1 + }, + "pin": { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + "saturation_steps": { + "type": "number", + "min": 0, + "multipleOf": 1 + } + } + }, + "usb": { + "type": "object", + "additionalProperties": false, + "properties": { + "device_ver": { + "type": "string", + "pattern": "^[0-9A-F]x[0-9A-F][0-9A-F][0-9A-F][0-9A-F]" + }, + "pid": { + "type": "string", + "pattern": "^[0-9A-F]x[0-9A-F][0-9A-F][0-9A-F][0-9A-F]" + }, + "vid": { + "type": "string", + "pattern": "^[0-9A-F]x[0-9A-F][0-9A-F][0-9A-F][0-9A-F]" + } + } + } + } +} diff --git a/data/schemas/true.jsonschema b/data/schemas/true.jsonschema new file mode 100644 index 00000000000..27ba77ddaf6 --- /dev/null +++ b/data/schemas/true.jsonschema @@ -0,0 +1 @@ +true From b2c26f7cdd4b268e80f98cae7f444956559436ec Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 1 Dec 2020 16:04:22 -0800 Subject: [PATCH 034/145] get qmk generate-api into a good state --- data/schemas/keyboard.jsonschema | 33 ++++++++++ lib/python/qmk/c_parse.py | 26 ++++++-- lib/python/qmk/cli/generate/api.py | 2 +- lib/python/qmk/cli/generate/rules_mk.py | 9 ++- lib/python/qmk/info.py | 82 +++++++++++++++++-------- 5 files changed, 117 insertions(+), 35 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 75e792b646f..9355ee49bd3 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -90,6 +90,9 @@ "type": "object", "additionalProperties": false, "properties": { + "filename": { + "type": "string" + }, "c_macro": { "type": "boolean" }, @@ -119,6 +122,18 @@ "type": "number", "min": 0.25 }, + "r": { + "type": "number", + "min": 0 + }, + "rx": { + "type": "number", + "min": 0 + }, + "ry": { + "type": "number", + "min": 0 + }, "w": { "type": "number", "min": 0.25 @@ -199,6 +214,12 @@ "min": 0, "multipleOf": 1 }, + "max_brightness": { + "type": "number", + "min": 0, + "max": 255, + "multipleOf": 1 + }, "pin": { "type": "string", "pattern": "^[A-K]\\d{1,2}$" @@ -207,6 +228,18 @@ "type": "number", "min": 0, "multipleOf": 1 + }, + "sleep": {"type": "boolean"}, + "split": {"type": "boolean"}, + "split_count": { + "type": "array", + "minLength": 2, + "maxLength": 2, + "items": { + "type": "number", + "min": 0, + "multipleOf": 1 + } } } }, diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index e41e271a435..67e196f0eaa 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -1,12 +1,27 @@ """Functions for working with config.h files. """ from pathlib import Path +import re from milc import cli from qmk.comment_remover import comment_remover default_key_entry = {'x': -1, 'y': 0, 'w': 1} +single_comment_regex = re.compile(r' */[/*].*$') +multi_comment_regex = re.compile(r'/\*(.|\n)*\*/', re.MULTILINE) + + +def strip_line_comment(string): + """Removes comments from a single line string. + """ + return single_comment_regex.sub('', string) + + +def strip_multiline_comment(string): + """Removes comments from a single line string. + """ + return multi_comment_regex.sub('', string) def c_source_files(dir_names): @@ -53,7 +68,8 @@ def find_layouts(file): parsed_layout = [_default_key(key) for key in layout.split(',')] for key in parsed_layout: - key['matrix'] = matrix_locations.get(key['label']) + if key['label'] in matrix_locations: + key['matrix'] = matrix_locations[key['label']] parsed_layouts[macro_name] = { 'key_count': len(parsed_layout), @@ -88,12 +104,10 @@ def parse_config_h_file(config_h_file, config_h=None): if config_h_file.exists(): config_h_text = config_h_file.read_text() config_h_text = config_h_text.replace('\\\n', '') + config_h_text = strip_multiline_comment(config_h_text) for linenum, line in enumerate(config_h_text.split('\n')): - line = line.strip() - - if '//' in line: - line = line[:line.index('//')].strip() + line = strip_line_comment(line).strip() if not line: continue @@ -156,6 +170,6 @@ def _parse_matrix_locations(matrix, file, macro_name): row = row.replace('{', '').replace('}', '') for col_num, identifier in enumerate(row.split(',')): if identifier != 'KC_NO': - matrix_locations[identifier] = (row_num, col_num) + matrix_locations[identifier] = [row_num, col_num] return matrix_locations diff --git a/lib/python/qmk/cli/generate/api.py b/lib/python/qmk/cli/generate/api.py index 6d111f244cd..2fda38fc9ae 100755 --- a/lib/python/qmk/cli/generate/api.py +++ b/lib/python/qmk/cli/generate/api.py @@ -48,7 +48,7 @@ def generate_api(cli): if 'vid' in usb and usb['vid'] not in usb_list['devices']: usb_list['devices'][usb['vid']] = {} - if 'pid' in usb and usb['pid'] not in usb_list['devices'][usb['vid']]: + if 'vid' in usb and usb['pid'] not in usb_list['devices'][usb['vid']]: usb_list['devices'][usb['vid']][usb['pid']] = {} if 'vid' in usb and 'pid' in usb: diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index 72ed3c45fa4..570ef5a0d6f 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -41,9 +41,12 @@ def generate_rules_mk(cli): # Find features that should be enabled if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): - feature = feature.upper() - enabled = 'yes' if enabled else 'no' - rules_mk_lines.append(f'{feature}_ENABLE := {enabled}') + if feature == 'bootmagic_lite' and enabled: + rules_mk_lines.append(f'BOOTMAGIC_ENABLE := lite') + else: + feature = feature.upper() + enabled = 'yes' if enabled else 'no' + rules_mk_lines.append(f'{feature}_ENABLE := {enabled}') # Set the LED driver if 'led_matrix' in kb_info_json and 'driver' in kb_info_json['led_matrix']: diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 1cf12190d6c..39af88f790a 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -26,13 +26,12 @@ led_matrix_properties = { } rgblight_properties = { - 'led_count': 'RGBLED_NUM', - 'pin': 'RGB_DI_PIN', - 'split_count': 'RGBLED_SPLIT', - 'max_brightness': 'RGBLIGHT_LIMIT_VAL', - 'hue_steps': 'RGBLIGHT_HUE_STEP', - 'saturation_steps': 'RGBLIGHT_SAT_STEP', - 'brightness_steps': 'RGBLIGHT_VAL_STEP' + 'led_count': ('RGBLED_NUM', int), + 'pin': ('RGB_DI_PIN', str), + 'max_brightness': ('RGBLIGHT_LIMIT_VAL', int), + 'hue_steps': ('RGBLIGHT_HUE_STEP', int), + 'saturation_steps': ('RGBLIGHT_SAT_STEP', int), + 'brightness_steps': ('RGBLIGHT_VAL_STEP', int) } rgblight_toggles = { @@ -54,6 +53,8 @@ rgblight_animations = { 'twinkle': 'RGBLIGHT_EFFECT_TWINKLE' } +usb_properties = {'vid': 'VENDOR_ID', 'pid': 'PRODUCT_ID', 'device_ver': 'DEVICE_VER'} + true_values = ['1', 'on', 'yes'] false_values = ['0', 'off', 'no'] @@ -97,7 +98,8 @@ def info_json(keyboard): keyboard_api_validate(info_data) except jsonschema.ValidationError as e: - cli.log.error('Invalid info.json data: %s', e.message) + json_path = '.'.join([str(p) for p in e.absolute_path]) + cli.log.error('Invalid API data: %s: %s: %s', keyboard, json_path, e.message) print(dir(e)) exit() @@ -198,6 +200,9 @@ def _extract_indicators(info_data, config_c): if json_key in info_data.get('indicators', []) and config_key in config_c: _log_warning(info_data, f'Indicator {json_key} is specified in both info.json and config.h, the config.h value wins.') + if 'indicators' not in info_data: + info_data['indicators'] = {} + if config_key in config_c: if 'indicators' not in info_data: info_data['indicators'] = {} @@ -226,10 +231,23 @@ def _extract_community_layouts(info_data, rules): def _extract_features(info_data, rules): """Find all the features enabled in rules.mk. """ + # Special handling for bootmagic which also supports a "lite" mode. + if rules.get('BOOTMAGIC_ENABLE') == 'lite': + rules['BOOTMAGIC_LITE_ENABLE'] = 'on' + del(rules['BOOTMAGIC_ENABLE']) + if rules.get('BOOTMAGIC_ENABLE') == 'full': + rules['BOOTMAGIC_ENABLE'] = 'on' + + # Skip non-boolean features we haven't implemented special handling for + for feature in 'HAPTIC_ENABLE', 'QWIIC_ENABLE': + if rules.get(feature): + del(rules[feature]) + + # Process the rest of the rules as booleans for key, value in rules.items(): if key.endswith('_ENABLE'): key = '_'.join(key.split('_')[:-1]).lower() - value = True if value in true_values else False if value in false_values else value + value = True if value.lower() in true_values else False if value.lower() in false_values else value if 'config_h_features' not in info_data: info_data['config_h_features'] = {} @@ -280,12 +298,21 @@ def _extract_rgblight(info_data, config_c): rgblight = info_data.get('rgblight', {}) animations = rgblight.get('animations', {}) - for json_key, config_key in rgblight_properties.items(): + if 'RGBLED_SPLIT' in config_c: + raw_split = config_c.get('RGBLED_SPLIT', '').replace('{', '').replace('}', '').strip() + rgblight['split_count'] = [int(i) for i in raw_split.split(',')] + + for json_key, config_key_type in rgblight_properties.items(): + config_key, config_type = config_key_type + if config_key in config_c: if json_key in rgblight: _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) - rgblight[json_key] = config_c[config_key] + try: + rgblight[json_key] = config_type(config_c[config_key]) + except ValueError as e: + cli.log.error('%s: config.h: Could not convert "%s" to %s: %s', info_data['keyboard_folder'], config_c[config_key], config_type.__name__, e) for json_key, config_key in rgblight_toggles.items(): if config_key in config_c: @@ -332,11 +359,16 @@ def _extract_matrix_info(info_data, config_c): info_data['matrix_pins'] = {} + # FIXME(skullydazed/anyone): Should really check every pin, not just the first if row_pins: - info_data['matrix_pins']['rows'] = row_pins.split(',') + row_pins = [pin.strip() for pin in row_pins.split(',') if pin] + if row_pins[0][0] in 'ABCDEFGHIJK' and row_pins[0][1].isdigit(): + info_data['matrix_pins']['rows'] = row_pins if col_pins: - info_data['matrix_pins']['cols'] = col_pins.split(',') + col_pins = [pin.strip() for pin in col_pins.split(',') if pin] + if col_pins[0][0] in 'ABCDEFGHIJK' and col_pins[0][1].isdigit(): + info_data['matrix_pins']['cols'] = col_pins if direct_pins: if 'matrix_pins' in info_data: @@ -345,6 +377,9 @@ def _extract_matrix_info(info_data, config_c): info_data['matrix_pins'] = {} direct_pin_array = [] + while direct_pins[-1] != '}': + direct_pins = direct_pins[:-1] + for row in direct_pins.split('},{'): if row.startswith('{'): row = row[1:] @@ -368,8 +403,6 @@ def _extract_matrix_info(info_data, config_c): def _extract_usb_info(info_data, config_c): """Populate the USB information. """ - usb_properties = {'vid': 'VENDOR_ID', 'pid': 'PRODUCT_ID', 'device_ver': 'DEVICE_VER'} - if 'usb' not in info_data: info_data['usb'] = {} @@ -378,10 +411,7 @@ def _extract_usb_info(info_data, config_c): if info_name in info_data['usb']: _log_warning(info_data, '%s in config.h is overwriting usb.%s in info.json' % (config_name, info_name)) - info_data['usb'][info_name] = config_c[config_name] - - elif info_name not in info_data['usb']: - _log_error(info_data, '%s not specified in config.h, and %s not specified in info.json. One is required.' % (config_name, info_name)) + info_data['usb'][info_name] = '0x' + config_c[config_name][2:].upper() return info_data @@ -519,8 +549,9 @@ def arm_processor_rules(info_data, rules): info_data['processor'] = 'unknown' if 'BOOTLOADER' in rules: - if 'bootloader' in info_data: - _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') + # FIXME(skullydazed/anyone): need to remove the massive amounts of duplication first + # if 'bootloader' in info_data: + # _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') info_data['bootloader'] = rules['BOOTLOADER'] @@ -558,8 +589,9 @@ def avr_processor_rules(info_data, rules): info_data['processor'] = 'unknown' if 'BOOTLOADER' in rules: - if 'bootloader' in info_data: - _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') + # FIXME(skullydazed/anyone): need to remove the massive amounts of duplication first + # if 'bootloader' in info_data: + # _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') info_data['bootloader'] = rules['BOOTLOADER'] else: @@ -593,8 +625,8 @@ def merge_info_jsons(keyboard, info_data): keyboard_validate(new_info_data) except jsonschema.ValidationError as e: - cli.log.error('Invalid info.json data: %s', e.message) - cli.log.error('Not including file %s', info_file) + json_path = '.'.join([str(p) for p in e.absolute_path]) + cli.log.error('Invalid info.json data: %s: %s: %s', info_file, json_path, e.message) continue if not isinstance(new_info_data, dict): From 2a67ff690ee5b0789b10448eef9fa0724a6c8d60 Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 1 Dec 2020 16:04:38 -0800 Subject: [PATCH 035/145] clean up generate-api errors --- keyboards/40percentclub/foobar/info.json | 2 -- keyboards/40percentclub/tomato/info.json | 1 - keyboards/4by3/info.json | 6 ------ keyboards/ai03/lunar/info.json | 3 +-- keyboards/alf/dc60/info.json | 4 +--- keyboards/alpha/info.json | 2 -- keyboards/amj40/info.json | 2 -- keyboards/atomic/info.json | 2 -- keyboards/bpiphany/unloved_bastard/info.json | 2 -- keyboards/chidori/info.json | 1 - keyboards/converter/adb_usb/info.json | 2 -- keyboards/converter/hp_46010a/config.h | 2 +- keyboards/converter/ibm_5291/config.h | 2 +- keyboards/doro67/regular/info.json | 4 +--- keyboards/ep/40/info.json | 1 - keyboards/ergodox_stm32/config.h | 2 +- keyboards/ergotravel/info.json | 1 + keyboards/ergotravel/rules.mk | 15 +-------------- keyboards/exclusive/e6v2/le_bmc/info.json | 2 -- keyboards/exclusive/e6v2/oe_bmc/info.json | 2 -- keyboards/flehrad/bigswitch/info.json | 2 -- keyboards/flehrad/downbubble/info.json | 3 +-- keyboards/fleuron/info.json | 4 +--- keyboards/handwired/frenchdev/info.json | 3 --- keyboards/handwired/ibm122m/info.json | 2 -- keyboards/keebio/nyquist/info.json | 2 -- keyboards/kmac/info.json | 2 -- keyboards/matrix/noah/info.json | 6 +++--- keyboards/mechmini/v2/info.json | 1 - keyboards/pabile/p40_ortho/info.json | 2 -- keyboards/pearl/info.json | 2 -- keyboards/qwertyydox/info.json | 1 + keyboards/qwertyydox/rules.mk | 13 ------------- keyboards/redscarf_i/info.json | 4 ---- keyboards/waldo/info.json | 4 +--- keyboards/xd004/info.json | 2 +- keyboards/ymdk_np21/info.json | 9 ++------- 37 files changed, 18 insertions(+), 102 deletions(-) diff --git a/keyboards/40percentclub/foobar/info.json b/keyboards/40percentclub/foobar/info.json index 6d722ae6ee8..c9bbda67c93 100644 --- a/keyboards/40percentclub/foobar/info.json +++ b/keyboards/40percentclub/foobar/info.json @@ -6,8 +6,6 @@ "height": 3, "layouts": { "LAYOUT_macro": { - "width": 5, - "height": 3, "key_count": 15, "layout": [ {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, diff --git a/keyboards/40percentclub/tomato/info.json b/keyboards/40percentclub/tomato/info.json index f01f5e7e0b7..b24f97bcd96 100644 --- a/keyboards/40percentclub/tomato/info.json +++ b/keyboards/40percentclub/tomato/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Tomato", "url": "", "maintainer": "qmk", - "bootloader": "", "width": 10, "height": 3, "layouts": { diff --git a/keyboards/4by3/info.json b/keyboards/4by3/info.json index 9cc07a9240f..fb78f05d51f 100644 --- a/keyboards/4by3/info.json +++ b/keyboards/4by3/info.json @@ -7,8 +7,6 @@ "layouts": { "LAYOUT_horizontal": { "key_count": 12, - "width": 4, - "height": 3, "layout": [ { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 }, { "x": 3, "y": 0 }, { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 }, { "x": 3, "y": 1 }, @@ -17,8 +15,6 @@ }, "LAYOUT_vertical_right": { "key_count": 12, - "width": 3, - "height": 4, "layout": [ { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 }, { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 }, @@ -28,8 +24,6 @@ }, "LAYOUT_vertical_left": { "key_count": 12, - "width": 3, - "height": 4, "layout": [ { "x": 0, "y": 0 }, { "x": 1, "y": 0 }, { "x": 2, "y": 0 }, { "x": 0, "y": 1 }, { "x": 1, "y": 1 }, { "x": 2, "y": 1 }, diff --git a/keyboards/ai03/lunar/info.json b/keyboards/ai03/lunar/info.json index e18a10bde0e..f3024be4315 100644 --- a/keyboards/ai03/lunar/info.json +++ b/keyboards/ai03/lunar/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Lunar", "url": "https://geekhack.org/index.php?topic=96112.0", "maintainer": "ai03", - "bootloader": "", "width": 16, "height": 5, "layouts": { @@ -81,4 +80,4 @@ ] } } -} \ No newline at end of file +} diff --git a/keyboards/alf/dc60/info.json b/keyboards/alf/dc60/info.json index 1c3ebf4f0ab..9482e0b4001 100644 --- a/keyboards/alf/dc60/info.json +++ b/keyboards/alf/dc60/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "dc60", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 15, "height": 5, "layouts": { @@ -10,4 +8,4 @@ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}] } } -} \ No newline at end of file +} diff --git a/keyboards/alpha/info.json b/keyboards/alpha/info.json index b08e6d9a419..0c03a51aa61 100644 --- a/keyboards/alpha/info.json +++ b/keyboards/alpha/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "Alpha", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 10, "height": 3, "layouts": { diff --git a/keyboards/amj40/info.json b/keyboards/amj40/info.json index ddbd34a7c4f..1b25106e0c0 100644 --- a/keyboards/amj40/info.json +++ b/keyboards/amj40/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "AMJ40", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 12, "height": 4, "layouts": { diff --git a/keyboards/atomic/info.json b/keyboards/atomic/info.json index b07a070253a..6e543b7b553 100644 --- a/keyboards/atomic/info.json +++ b/keyboards/atomic/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "Atomic", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 15, "height": 5, "layouts": { diff --git a/keyboards/bpiphany/unloved_bastard/info.json b/keyboards/bpiphany/unloved_bastard/info.json index b0e3346e070..ff8c52d9c29 100644 --- a/keyboards/bpiphany/unloved_bastard/info.json +++ b/keyboards/bpiphany/unloved_bastard/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "unloved_bastard", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 18.25, "height": 6.5, "layouts": { diff --git a/keyboards/chidori/info.json b/keyboards/chidori/info.json index 8a24d1a9268..0c892aa084f 100644 --- a/keyboards/chidori/info.json +++ b/keyboards/chidori/info.json @@ -14,7 +14,6 @@ ] }, "LAYOUT_extended": { - "width": 20, "layout": [ {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":19, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":19, "y":1}, diff --git a/keyboards/converter/adb_usb/info.json b/keyboards/converter/adb_usb/info.json index e06f9c1adb6..e00b3b05f96 100644 --- a/keyboards/converter/adb_usb/info.json +++ b/keyboards/converter/adb_usb/info.json @@ -114,8 +114,6 @@ ] }, "LAYOUT_m0116_ansi": { - "width": 19.5, - "height": 6.25, "layout": [ {"label":"Power", "x":5, "y":0, "w":2}, {"label":"Esc", "x":0, "y":1.25}, diff --git a/keyboards/converter/hp_46010a/config.h b/keyboards/converter/hp_46010a/config.h index b7297ab884a..a1345c66dc6 100644 --- a/keyboards/converter/hp_46010a/config.h +++ b/keyboards/converter/hp_46010a/config.h @@ -21,7 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 -#define DEVICE_VER 1 +#define DEVICE_VER 0x0001 #define MANUFACTURER QMK #define PRODUCT 46010A keyboard converter #define DESCRIPTION 46010A keyboard converter diff --git a/keyboards/converter/ibm_5291/config.h b/keyboards/converter/ibm_5291/config.h index 9701bdfe973..f4c41d07067 100644 --- a/keyboards/converter/ibm_5291/config.h +++ b/keyboards/converter/ibm_5291/config.h @@ -21,7 +21,7 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 -#define DEVICE_VER 1 +#define DEVICE_VER 0x0001 #define MANUFACTURER QMK #define PRODUCT 5291 keyboard converter #define DESCRIPTION 5291 keyboard converter diff --git a/keyboards/doro67/regular/info.json b/keyboards/doro67/regular/info.json index ebdfa4db687..e5ea4c16a64 100644 --- a/keyboards/doro67/regular/info.json +++ b/keyboards/doro67/regular/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 16, "height": 5, @@ -79,4 +77,4 @@ } } } - \ No newline at end of file + diff --git a/keyboards/ep/40/info.json b/keyboards/ep/40/info.json index 1c57ac67499..51c000e7403 100644 --- a/keyboards/ep/40/info.json +++ b/keyboards/ep/40/info.json @@ -1,6 +1,5 @@ { "keyboard_name":"ep40", - "url":null, "maintainer":"e11i0t23", "width":12, "hight":4, diff --git a/keyboards/ergodox_stm32/config.h b/keyboards/ergodox_stm32/config.h index e1b3d7b14e6..e0255875a19 100644 --- a/keyboards/ergodox_stm32/config.h +++ b/keyboards/ergodox_stm32/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x1308 -#define DEVICE_VER 0x101 +#define DEVICE_VER 0x0101 #define MANUFACTURER ErgoDox #define PRODUCT ErgoDox STM #define DESCRIPTION ErgoDox STM32 Keyboard diff --git a/keyboards/ergotravel/info.json b/keyboards/ergotravel/info.json index c0e5cc63689..5cd19ced535 100644 --- a/keyboards/ergotravel/info.json +++ b/keyboards/ergotravel/info.json @@ -4,6 +4,7 @@ "identifier": "0x1256", "url": "https://github.com/jpconstantineau/ErgoTravel", "maintainer": "qmk", + "bootloader": "caterina", "processor": "atmega32u4", "width": 16, "height": 5, diff --git a/keyboards/ergotravel/rules.mk b/keyboards/ergotravel/rules.mk index 5fd2a23dafb..ab0ae83c14f 100644 --- a/keyboards/ergotravel/rules.mk +++ b/keyboards/ergotravel/rules.mk @@ -1,16 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = caterina - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically @@ -32,4 +19,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SPLIT_KEYBOARD = yes -DEFAULT_FOLDER = ergotravel/rev1 \ No newline at end of file +DEFAULT_FOLDER = ergotravel/rev1 diff --git a/keyboards/exclusive/e6v2/le_bmc/info.json b/keyboards/exclusive/e6v2/le_bmc/info.json index 413db8abcaa..4604f575653 100644 --- a/keyboards/exclusive/e6v2/le_bmc/info.json +++ b/keyboards/exclusive/e6v2/le_bmc/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 15, "height": 5, diff --git a/keyboards/exclusive/e6v2/oe_bmc/info.json b/keyboards/exclusive/e6v2/oe_bmc/info.json index 413db8abcaa..4604f575653 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/info.json +++ b/keyboards/exclusive/e6v2/oe_bmc/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 15, "height": 5, diff --git a/keyboards/flehrad/bigswitch/info.json b/keyboards/flehrad/bigswitch/info.json index 8d3d746f577..37095ade3c7 100644 --- a/keyboards/flehrad/bigswitch/info.json +++ b/keyboards/flehrad/bigswitch/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "Bigswitch PCB", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 4, "height": 4, "layouts": { diff --git a/keyboards/flehrad/downbubble/info.json b/keyboards/flehrad/downbubble/info.json index c5cd97de548..a7e68e7f61b 100644 --- a/keyboards/flehrad/downbubble/info.json +++ b/keyboards/flehrad/downbubble/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "downbubble", - "url": "", "maintainer": "flehrad", "width": 22.75, "height": 6, @@ -429,7 +428,7 @@ {"label":"K53", "x":3.75, "y":5, "w":1.25}, {"label":"K54", "x":5, "y":5, "w":2.25}, {"label":"K56", "x":7.75, "y":5}, - {"Label":"K57", "x":8.75, "y":5}, + {"label":"K57", "x":8.75, "y":5}, {"label":"K58", "x":9.75, "y":5}, {"label":"K59", "x":10.75, "y":5}, {"label":"K510", "x":13, "y":5, "w":2}, diff --git a/keyboards/fleuron/info.json b/keyboards/fleuron/info.json index 2f357d3bf09..78fe64e3a1b 100644 --- a/keyboards/fleuron/info.json +++ b/keyboards/fleuron/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "Fleuron v1.0", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 16, "height": 6, "layouts": { @@ -106,4 +104,4 @@ {"label":"Enter", "x":15, "y":5}] } } -} \ No newline at end of file +} diff --git a/keyboards/handwired/frenchdev/info.json b/keyboards/handwired/frenchdev/info.json index 28f09a3aa11..2477302becf 100644 --- a/keyboards/handwired/frenchdev/info.json +++ b/keyboards/handwired/frenchdev/info.json @@ -1,8 +1,5 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 20, "height": 9.5, "layouts": { diff --git a/keyboards/handwired/ibm122m/info.json b/keyboards/handwired/ibm122m/info.json index b9ce9e8f83e..46db3c0d756 100644 --- a/keyboards/handwired/ibm122m/info.json +++ b/keyboards/handwired/ibm122m/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "IBM Model M 122-key", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 24.75, "height": 8, "layouts": { diff --git a/keyboards/keebio/nyquist/info.json b/keyboards/keebio/nyquist/info.json index 6e44d98a1b9..d948baaa186 100644 --- a/keyboards/keebio/nyquist/info.json +++ b/keyboards/keebio/nyquist/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "Nyquist", - "url": "", "maintainer": "qmk", "width": 13, "height": 5, @@ -12,7 +11,6 @@ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}] }, "LAYOUT_ortho_4x12": { - "height": 4, "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}] } } diff --git a/keyboards/kmac/info.json b/keyboards/kmac/info.json index 2fe0ef2697a..6a98fab0a44 100644 --- a/keyboards/kmac/info.json +++ b/keyboards/kmac/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "kmac", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 18.25, "height": 6.5, "layouts": { diff --git a/keyboards/matrix/noah/info.json b/keyboards/matrix/noah/info.json index 69fc0fccfcb..bb06a16d7cb 100644 --- a/keyboards/matrix/noah/info.json +++ b/keyboards/matrix/noah/info.json @@ -84,7 +84,7 @@ "y": 0 }, { - "Label": "Ins", + "label": "Ins", "x": 15, "y": 0 }, @@ -440,7 +440,7 @@ "y": 0 }, { - "Label": "Ins", + "label": "Ins", "x": 15, "y": 0 }, @@ -807,7 +807,7 @@ "y": 0 }, { - "Label": "Ins", + "label": "Ins", "x": 15, "y": 0 }, diff --git a/keyboards/mechmini/v2/info.json b/keyboards/mechmini/v2/info.json index c69771c1f85..f24b8648cbb 100644 --- a/keyboards/mechmini/v2/info.json +++ b/keyboards/mechmini/v2/info.json @@ -2,7 +2,6 @@ "keyboard_name": "MechMini 2", "url": "https://mechkeys.ca/pages/mechmini-2-guide", "maintainer": "qmk", - "bootloader": "", "width": 12, "height": 4, "layouts": { diff --git a/keyboards/pabile/p40_ortho/info.json b/keyboards/pabile/p40_ortho/info.json index a4d757be927..fb64234e588 100644 --- a/keyboards/pabile/p40_ortho/info.json +++ b/keyboards/pabile/p40_ortho/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 10, "height": 4, diff --git a/keyboards/pearl/info.json b/keyboards/pearl/info.json index 5bc4e049402..c86fcb9dfa7 100644 --- a/keyboards/pearl/info.json +++ b/keyboards/pearl/info.json @@ -1,8 +1,6 @@ { "keyboard_name": "Pearl", - "url": "", "maintainer": "qmk", - "bootloader": "", "width": 13, "height": 4, "layouts": { diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json index 8616f274ea3..2a7efc199d6 100644 --- a/keyboards/qwertyydox/info.json +++ b/keyboards/qwertyydox/info.json @@ -4,6 +4,7 @@ "identifier": "0x1256", "url": "", "maintainer": "qmk", + "bootloader": "caterina", "processor": "atmega32u4", "width": 16.25, "height": 5, diff --git a/keyboards/qwertyydox/rules.mk b/keyboards/qwertyydox/rules.mk index bad5a268afe..3e66c233ac4 100644 --- a/keyboards/qwertyydox/rules.mk +++ b/keyboards/qwertyydox/rules.mk @@ -1,16 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = caterina - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically diff --git a/keyboards/redscarf_i/info.json b/keyboards/redscarf_i/info.json index a2ea71f3a2d..3bf1ae6934b 100644 --- a/keyboards/redscarf_i/info.json +++ b/keyboards/redscarf_i/info.json @@ -5,7 +5,6 @@ "width": 4, "layouts": { "LAYOUT_ortho_5x4": { - "height": 5, "key_count": 20, "layout": [ {"x":0, "y":0}, @@ -31,7 +30,6 @@ ] }, "LAYOUT_ortho_6x4": { - "height": 6, "key_count": 24, "layout": [ {"x":0, "y":0}, @@ -61,7 +59,6 @@ ] }, "LAYOUT_numpad_5x4": { - "height": 5, "key_count": 17, "layout": [ {"x":0, "y":0}, @@ -84,7 +81,6 @@ ] }, "LAYOUT_numpad_6x4": { - "height": 6, "key_count": 21, "layout": [ {"x":0, "y":0}, diff --git a/keyboards/waldo/info.json b/keyboards/waldo/info.json index 5cdc12d5ef5..11fa5182ed5 100644 --- a/keyboards/waldo/info.json +++ b/keyboards/waldo/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 15, "height": 5, @@ -21,4 +19,4 @@ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] } } -} \ No newline at end of file +} diff --git a/keyboards/xd004/info.json b/keyboards/xd004/info.json index 72c15da7f8a..6f7082a14b0 100644 --- a/keyboards/xd004/info.json +++ b/keyboards/xd004/info.json @@ -1,6 +1,6 @@ { "keyboard_name": "XD004", - "maintainer": "", + "maintainer": "qmk", "width": 4, "height": 1, "layouts": { diff --git a/keyboards/ymdk_np21/info.json b/keyboards/ymdk_np21/info.json index bc5b101c9a4..845c0bb81ee 100644 --- a/keyboards/ymdk_np21/info.json +++ b/keyboards/ymdk_np21/info.json @@ -1,11 +1,10 @@ { "keyboard_name": "YMDK NP21", - "url": "", "maintainer": "qmk", + "width": 4, + "height": 6.25, "layouts": { "LAYOUT_ortho_6x4": { - "width": 4, - "height": 6.25, "layout": [ {"x": 0, "y": 0}, {"x": 1, "y": 0}, @@ -39,8 +38,6 @@ ] }, "LAYOUT_ortho_4x6": { - "width": 6.25, - "height": 4, "layout": [ {"x": 0, "y": 0}, {"x": 1, "y": 0}, @@ -72,8 +69,6 @@ ] }, "LAYOUT_numpad_6x4": { - "width": 4, - "height": 6.25, "layout": [ {"x": 0, "y": 0}, {"x": 1, "y": 0}, From 56ef80216ae4c67e2a70857c61d1e62eec1ab380 Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 30 Dec 2020 11:21:18 -0800 Subject: [PATCH 036/145] make flake8 happy --- lib/python/qmk/cli/generate/rules_mk.py | 5 +- lib/python/qmk/info.py | 84 ++++++++++++++----------- 2 files changed, 50 insertions(+), 39 deletions(-) diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index 570ef5a0d6f..2a7e9185692 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -8,9 +8,10 @@ from qmk.path import is_keyboard, normpath info_to_rules = { 'bootloader': 'BOOTLOADER', - 'processor': 'MCU' + 'processor': 'MCU', } + @cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") @cli.argument('-kb', '--keyboard', help='Keyboard to generate config.h for.') @@ -42,7 +43,7 @@ def generate_rules_mk(cli): if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): if feature == 'bootmagic_lite' and enabled: - rules_mk_lines.append(f'BOOTMAGIC_ENABLE := lite') + rules_mk_lines.append('BOOTMAGIC_ENABLE := lite') else: feature = feature.upper() enabled = 'yes' if enabled else 'no' diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 39af88f790a..efd339115b0 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -234,14 +234,14 @@ def _extract_features(info_data, rules): # Special handling for bootmagic which also supports a "lite" mode. if rules.get('BOOTMAGIC_ENABLE') == 'lite': rules['BOOTMAGIC_LITE_ENABLE'] = 'on' - del(rules['BOOTMAGIC_ENABLE']) + del rules['BOOTMAGIC_ENABLE'] if rules.get('BOOTMAGIC_ENABLE') == 'full': rules['BOOTMAGIC_ENABLE'] = 'on' # Skip non-boolean features we haven't implemented special handling for for feature in 'HAPTIC_ENABLE', 'QWIIC_ENABLE': if rules.get(feature): - del(rules[feature]) + del rules[feature] # Process the rest of the rules as booleans for key, value in rules.items(): @@ -337,6 +337,45 @@ def _extract_rgblight(info_data, config_c): return info_data +def _extract_pins(pins): + """Returns a list of pins from a comma separated string of pins. + """ + pins = [pin.strip() for pin in pins.split(',') if pin] + + for pin in pins: + if pin[0] not in 'ABCDEFGHIJK' or not pin[1].isdigit(): + raise ValueError(f'Invalid pin: {pin}') + + return pins + + +def _extract_direct_matrix(info_data, direct_pins): + """ + """ + info_data['matrix_pins'] = {} + direct_pin_array = [] + + while direct_pins[-1] != '}': + direct_pins = direct_pins[:-1] + + for row in direct_pins.split('},{'): + if row.startswith('{'): + row = row[1:] + + if row.endswith('}'): + row = row[:-1] + + direct_pin_array.append([]) + + for pin in row.split(','): + if pin == 'NO_PIN': + pin = None + + direct_pin_array[-1].append(pin) + + return direct_pin_array + + def _extract_matrix_info(info_data, config_c): """Populate the matrix information. """ @@ -349,53 +388,24 @@ def _extract_matrix_info(info_data, config_c): _log_warning(info_data, 'Matrix size is specified in both info.json and config.h, the config.h values win.') info_data['matrix_size'] = { - 'rows': compute(config_c.get('MATRIX_ROWS', '0')), 'cols': compute(config_c.get('MATRIX_COLS', '0')), + 'rows': compute(config_c.get('MATRIX_ROWS', '0')), } if row_pins and col_pins: if 'matrix_pins' in info_data: _log_warning(info_data, 'Matrix pins are specified in both info.json and config.h, the config.h values win.') - info_data['matrix_pins'] = {} - - # FIXME(skullydazed/anyone): Should really check every pin, not just the first - if row_pins: - row_pins = [pin.strip() for pin in row_pins.split(',') if pin] - if row_pins[0][0] in 'ABCDEFGHIJK' and row_pins[0][1].isdigit(): - info_data['matrix_pins']['rows'] = row_pins - - if col_pins: - col_pins = [pin.strip() for pin in col_pins.split(',') if pin] - if col_pins[0][0] in 'ABCDEFGHIJK' and col_pins[0][1].isdigit(): - info_data['matrix_pins']['cols'] = col_pins + info_data['matrix_pins'] = { + 'cols': _extract_pins(col_pins), + 'rows': _extract_pins(row_pins), + } if direct_pins: if 'matrix_pins' in info_data: _log_warning(info_data, 'Direct pins are specified in both info.json and config.h, the config.h values win.') - info_data['matrix_pins'] = {} - direct_pin_array = [] - - while direct_pins[-1] != '}': - direct_pins = direct_pins[:-1] - - for row in direct_pins.split('},{'): - if row.startswith('{'): - row = row[1:] - - if row.endswith('}'): - row = row[:-1] - - direct_pin_array.append([]) - - for pin in row.split(','): - if pin == 'NO_PIN': - pin = None - - direct_pin_array[-1].append(pin) - - info_data['matrix_pins']['direct'] = direct_pin_array + info_data['matrix_pins']['direct'] = _extract_direct_matrix(info_data, direct_pins) return info_data From 9a178f6826a30007f84983daf1c87ded1525c9cd Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:13:25 -0800 Subject: [PATCH 037/145] fix rgblight properties --- lib/python/qmk/cli/generate/config_h.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index 09aa0041f4d..15d4fbf2dd0 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -173,9 +173,9 @@ def rgblight(config): for json_key, config_key in rgblight_properties.items(): if json_key in config: rgblight_config.append('') - rgblight_config.append('#ifndef %s' % (config_key,)) - rgblight_config.append('# define %s %s' % (config_key, config[json_key])) - rgblight_config.append('#endif // %s' % (config_key,)) + rgblight_config.append('#ifndef %s' % (config_key[0],)) + rgblight_config.append('# define %s %s' % (config_key[0], config[json_key])) + rgblight_config.append('#endif // %s' % (config_key[0],)) for json_key, config_key in rgblight_toggles.items(): if config.get(json_key): From b44532aa3dbdce702d662e5b1cf043e461846d8b Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:28:58 -0800 Subject: [PATCH 038/145] change invalid pin from error to warning --- lib/python/qmk/info.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index efd339115b0..89c08809bae 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -344,7 +344,7 @@ def _extract_pins(pins): for pin in pins: if pin[0] not in 'ABCDEFGHIJK' or not pin[1].isdigit(): - raise ValueError(f'Invalid pin: {pin}') + cli.log.warning(f'Nonstandard pin format: {pin}') return pins From ed19198c7891735a5ba3f118f25c608f968f746f Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:33:30 -0800 Subject: [PATCH 039/145] loosen up the schema to allow any pin format --- data/schemas/keyboard.jsonschema | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 9355ee49bd3..f250ffd8a9a 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -163,8 +163,7 @@ "items": { "oneOf": [ { - "type": "string", - "pattern": "^[A-K]\\d{1,2}$" + "type": "string" }, { "type": "null" @@ -176,15 +175,13 @@ "cols": { "type": "array", "items": { - "type": "string", - "pattern": "^[A-K]\\d{1,2}$" + "type": "string" } }, "rows": { "type": "array", "items": { - "type": "string", - "pattern": "^[A-K]\\d{1,2}$" + "type": "string" } } } From e2e793c1c3efeb96108072c2c8a57555c0fa76a0 Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:37:31 -0800 Subject: [PATCH 040/145] Revert "change invalid pin from error to warning" This reverts commit 68da9cd19658071f0c2f22e97956303281703176. --- lib/python/qmk/info.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 89c08809bae..efd339115b0 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -344,7 +344,7 @@ def _extract_pins(pins): for pin in pins: if pin[0] not in 'ABCDEFGHIJK' or not pin[1].isdigit(): - cli.log.warning(f'Nonstandard pin format: {pin}') + raise ValueError(f'Invalid pin: {pin}') return pins From 82007aa03a93ba77e54f4660c80ef3749630de0c Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:37:53 -0800 Subject: [PATCH 041/145] Revert "loosen up the schema to allow any pin format" This reverts commit e41762be64c170f42ab3f8aa6b7e3078e5895e92. --- data/schemas/keyboard.jsonschema | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index f250ffd8a9a..9355ee49bd3 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -163,7 +163,8 @@ "items": { "oneOf": [ { - "type": "string" + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" }, { "type": "null" @@ -175,13 +176,15 @@ "cols": { "type": "array", "items": { - "type": "string" + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" } }, "rows": { "type": "array", "items": { - "type": "string" + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" } } } From 4394fc35ea0af6b30aae5dc244281388903b9aa9 Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 6 Jan 2021 10:42:37 -0800 Subject: [PATCH 042/145] change matrix/m20add to use non-standard names for non-standard pins --- keyboards/matrix/m20add/config.h | 6 ++++-- keyboards/matrix/m20add/matrix.c | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/keyboards/matrix/m20add/config.h b/keyboards/matrix/m20add/config.h index 8c3f922ab91..31643464951 100644 --- a/keyboards/matrix/m20add/config.h +++ b/keyboards/matrix/m20add/config.h @@ -45,7 +45,8 @@ #define COL15_MASK 0x04 #define COL16_MASK 0x02 -#define MATRIX_ROW_PINS { \ +// Note: MATRIX_ROW_PINS only works with standard pin names. +#define MATRIX_M20_ROW_PINS { \ DEF_PIN(TCA6424_PORT2, 7), \ DEF_PIN(TCA6424_PORT2, 6), \ DEF_PIN(TCA6424_PORT2, 0), \ @@ -53,7 +54,8 @@ DEF_PIN(TCA6424_PORT2, 4), \ DEF_PIN(TCA6424_PORT2, 5) } -#define MATRIX_COL_PINS { \ +// Note: MATRIX_COL_PINS only works with standard pin names. +#define MATRIX_M20_COL_PINS { \ DEF_PIN(TCA6424_PORT2, 1), \ DEF_PIN(TCA6424_PORT1, 7), \ DEF_PIN(TCA6424_PORT1, 6), \ diff --git a/keyboards/matrix/m20add/matrix.c b/keyboards/matrix/m20add/matrix.c index b17643fea82..e9ddbdff62b 100644 --- a/keyboards/matrix/m20add/matrix.c +++ b/keyboards/matrix/m20add/matrix.c @@ -10,7 +10,7 @@ #include "tca6424.h" #include "m20add.h" -static const uint16_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +static const uint16_t col_pins[MATRIX_COLS] = MATRIX_M20_COL_PINS; void matrix_init_custom(void) { From a1007627e4d18c31803c8415972cbcf34165954b Mon Sep 17 00:00:00 2001 From: Zach White Date: Thu, 7 Jan 2021 11:58:18 -0800 Subject: [PATCH 043/145] fix travis --- util/travis_utils.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/util/travis_utils.sh b/util/travis_utils.sh index e949946e222..1aaab812cae 100755 --- a/util/travis_utils.sh +++ b/util/travis_utils.sh @@ -23,3 +23,6 @@ if command -v docker >/dev/null; then docker run --rm -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container bin/qmk "$@" } fi + +# Install updated python deps +python3 -m pip install -U -r requirements.txt From a828a82d59b6205a56f7d42d51217f13ffbcb0d5 Mon Sep 17 00:00:00 2001 From: Zach White Date: Thu, 7 Jan 2021 21:03:36 -0800 Subject: [PATCH 044/145] remove the python dep update --- util/travis_utils.sh | 3 --- 1 file changed, 3 deletions(-) diff --git a/util/travis_utils.sh b/util/travis_utils.sh index 1aaab812cae..e949946e222 100755 --- a/util/travis_utils.sh +++ b/util/travis_utils.sh @@ -23,6 +23,3 @@ if command -v docker >/dev/null; then docker run --rm -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container bin/qmk "$@" } fi - -# Install updated python deps -python3 -m pip install -U -r requirements.txt From 30331b383f9ef4620e47aa07e4f9af7fae9d30b3 Mon Sep 17 00:00:00 2001 From: Zach White Date: Fri, 8 Jan 2021 00:00:15 -0800 Subject: [PATCH 045/145] fix bugs triggered by certain boards --- data/schemas/keyboard.jsonschema | 34 +++++++++++++++++++++--- lib/python/qmk/c_parse.py | 4 +-- lib/python/qmk/cli/generate/config_h.py | 6 ++--- lib/python/qmk/info.py | 35 +++++++++++++++++-------- 4 files changed, 59 insertions(+), 20 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 9355ee49bd3..e13771e92a3 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -166,6 +166,10 @@ "type": "string", "pattern": "^[A-K]\\d{1,2}$" }, + { + "type": "number", + "multipleOf": 1 + }, { "type": "null" } @@ -176,15 +180,37 @@ "cols": { "type": "array", "items": { - "type": "string", - "pattern": "^[A-K]\\d{1,2}$" + "oneOf": [ + { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + { + "type": "number", + "multipleOf": 1 + }, + { + "type": "null" + } + ] } }, "rows": { "type": "array", "items": { - "type": "string", - "pattern": "^[A-K]\\d{1,2}$" + "oneOf": [ + { + "type": "string", + "pattern": "^[A-K]\\d{1,2}$" + }, + { + "type": "number", + "multipleOf": 1 + }, + { + "type": "null" + } + ] } } } diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index 67e196f0eaa..0338484ec78 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -9,7 +9,7 @@ from qmk.comment_remover import comment_remover default_key_entry = {'x': -1, 'y': 0, 'w': 1} single_comment_regex = re.compile(r' */[/*].*$') -multi_comment_regex = re.compile(r'/\*(.|\n)*\*/', re.MULTILINE) +multi_comment_regex = re.compile(r'/\*(.|\n)*?\*/', re.MULTILINE) def strip_line_comment(string): @@ -103,7 +103,7 @@ def parse_config_h_file(config_h_file, config_h=None): if config_h_file.exists(): config_h_text = config_h_file.read_text() - config_h_text = config_h_text.replace('\\\n', '') + config_h_text = config_h_text.replace('\\\n', '') # Why are you here? config_h_text = strip_multiline_comment(config_h_text) for linenum, line in enumerate(config_h_text.split('\n')): diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index 15d4fbf2dd0..1de84de7a91 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -64,7 +64,7 @@ def direct_pins(direct_pins): rows = [] for row in direct_pins: - cols = ','.join([col or 'NO_PIN' for col in row]) + cols = ','.join(map(str, [col or 'NO_PIN' for col in row])) rows.append('{' + cols + '}') col_count = len(direct_pins[0]) @@ -88,7 +88,7 @@ def direct_pins(direct_pins): def col_pins(col_pins): """Return the config.h lines that set the column pins. """ - cols = ','.join(col_pins) + cols = ','.join(map(str, [pin or 'NO_PIN' for pin in col_pins])) col_num = len(col_pins) return """ @@ -105,7 +105,7 @@ def col_pins(col_pins): def row_pins(row_pins): """Return the config.h lines that set the row pins. """ - rows = ','.join(row_pins) + rows = ','.join(map(str, [pin or 'NO_PIN' for pin in row_pins])) row_num = len(row_pins) return """ diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index efd339115b0..28c281a4bca 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -315,11 +315,10 @@ def _extract_rgblight(info_data, config_c): cli.log.error('%s: config.h: Could not convert "%s" to %s: %s', info_data['keyboard_folder'], config_c[config_key], config_type.__name__, e) for json_key, config_key in rgblight_toggles.items(): - if config_key in config_c: - if json_key in rgblight: - _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.', json_key) + if config_key in config_c and json_key in rgblight: + _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.', json_key) - rgblight[json_key] = config_c[config_key] + rgblight[json_key] = config_key in config_c for json_key, config_key in rgblight_animations.items(): if config_key in config_c: @@ -337,16 +336,30 @@ def _extract_rgblight(info_data, config_c): return info_data +def _pin_name(pin): + """Returns the proper representation for a pin. + """ + pin = pin.strip() + + if not pin: + return None + + elif pin.isdigit(): + return int(pin) + + elif pin == 'NO_PIN': + return None + + elif pin[0] in 'ABCDEFGHIJK' and pin[1].isdigit(): + return pin + + raise ValueError(f'Invalid pin: {pin}') + + def _extract_pins(pins): """Returns a list of pins from a comma separated string of pins. """ - pins = [pin.strip() for pin in pins.split(',') if pin] - - for pin in pins: - if pin[0] not in 'ABCDEFGHIJK' or not pin[1].isdigit(): - raise ValueError(f'Invalid pin: {pin}') - - return pins + return [_pin_name(pin) for pin in pins.split(',')] def _extract_direct_matrix(info_data, direct_pins): From 7e78699e79e228b447f92d5ac187572926ca4636 Mon Sep 17 00:00:00 2001 From: Zach White Date: Fri, 8 Jan 2021 00:01:20 -0800 Subject: [PATCH 046/145] use a custom name for custom pins --- keyboards/nek_type_a/config.h | 4 ++-- keyboards/nek_type_a/matrix.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/nek_type_a/config.h b/keyboards/nek_type_a/config.h index 98a954dd12a..7cdfc1e9bee 100644 --- a/keyboards/nek_type_a/config.h +++ b/keyboards/nek_type_a/config.h @@ -33,8 +33,8 @@ along with this program. If not, see . /* left columns are all onboard, right columns all on expander */ #define COL_EXPANDED { false, false, false, false, false, false, false, true, true, true, true, true, true, true, true, true, true, true} -#define MATRIX_COL_PINS { C6, D7, B5, B6, B7, D6, D3, GPA0, GPA1, GPA2, GPA3, GPA4, GPA5, GPA6, GPA7, GPB0, GPB1, GPB2 } -#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 } +#define NEK_MATRIX_COL_PINS { C6, D7, B5, B6, B7, D6, D3, GPA0, GPA1, GPA2, GPA3, GPA4, GPA5, GPA6, GPA7, GPB0, GPB1, GPB2 } +#define NEK_MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 } #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index a3c0155e1a3..1da5b44a3c1 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -69,8 +69,8 @@ along with this program. If not, see . #endif #if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +static const uint8_t row_pins[MATRIX_ROWS] = NEK_MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = NEK_MATRIX_COL_PINS; static const bool col_expanded[MATRIX_COLS] = COL_EXPANDED; #endif From 959f566118e9f0243aae054bf1e044bf3f60fa37 Mon Sep 17 00:00:00 2001 From: Zach White Date: Fri, 8 Jan 2021 00:02:06 -0800 Subject: [PATCH 047/145] comment out a non-standard DIODE_DIRECTION --- keyboards/hineybush/hbcp/config.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/hineybush/hbcp/config.h b/keyboards/hineybush/hbcp/config.h index 4f3f2a1cd6b..24ca5d75a38 100644 --- a/keyboards/hineybush/hbcp/config.h +++ b/keyboards/hineybush/hbcp/config.h @@ -45,7 +45,8 @@ along with this program. If not, see . #define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, B5, B4, B3, B2 } #define UNUSED_PINS -#define DIODE_DIRECTION EITHERWAY +//EITHERWAY is supported through a custom matrix +//#define DIODE_DIRECTION EITHERWAY #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING From 58fcdf8c07e5c1363b6b3eaf23883853dfd12f53 Mon Sep 17 00:00:00 2001 From: Zach White Date: Fri, 8 Jan 2021 00:21:51 -0800 Subject: [PATCH 048/145] remove extraneous comment --- lib/python/qmk/c_parse.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index 0338484ec78..ade3e380596 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -103,7 +103,7 @@ def parse_config_h_file(config_h_file, config_h=None): if config_h_file.exists(): config_h_text = config_h_file.read_text() - config_h_text = config_h_text.replace('\\\n', '') # Why are you here? + config_h_text = config_h_text.replace('\\\n', '') config_h_text = strip_multiline_comment(config_h_text) for linenum, line in enumerate(config_h_text.split('\n')): From e2c7f893470465f986bd6849c18606be0f2b7842 Mon Sep 17 00:00:00 2001 From: Zach White Date: Fri, 8 Jan 2021 08:46:51 -0800 Subject: [PATCH 049/145] typo fix --- lib/python/qmk/cli/generate/api.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/cli/generate/api.py b/lib/python/qmk/cli/generate/api.py index 2fda38fc9ae..6d111f244cd 100755 --- a/lib/python/qmk/cli/generate/api.py +++ b/lib/python/qmk/cli/generate/api.py @@ -48,7 +48,7 @@ def generate_api(cli): if 'vid' in usb and usb['vid'] not in usb_list['devices']: usb_list['devices'][usb['vid']] = {} - if 'vid' in usb and usb['pid'] not in usb_list['devices'][usb['vid']]: + if 'pid' in usb and usb['pid'] not in usb_list['devices'][usb['vid']]: usb_list['devices'][usb['vid']][usb['pid']] = {} if 'vid' in usb and 'pid' in usb: From 962bc8d9dd413690dbeadeaac971a5389697210f Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 9 Jan 2021 13:34:14 -0800 Subject: [PATCH 050/145] Use the schema to eliminate custom code (#11108) * use the schema to eliminate custom code * Update docs/reference_info_json.md Co-authored-by: Ryan * make flake8 happy * bugfix * do not overwrite make vars from json Co-authored-by: Ryan --- data/schemas/keyboard.jsonschema | 2 +- docs/reference_info_json.md | 1 + lib/python/qmk/cli/generate/info_json.py | 48 ++++++++++++------- lib/python/qmk/cli/generate/layouts.py | 4 ++ lib/python/qmk/cli/generate/rules_mk.py | 10 ++-- lib/python/qmk/constants.py | 2 +- lib/python/qmk/info.py | 60 ++++++++++++------------ setup.cfg | 2 + 8 files changed, 75 insertions(+), 54 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index e13771e92a3..f76c7fd1895 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["MK20DX128", "MK20DX256", "MKL26Z64", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "at90usb1286", "at90usb646", "atmega16u2", "atmega328p", "atmega32a", "atmega32u2", "atmega32u4", "attiny85", "cortex-m4"] + "enum": ["MK20DX128", "MK20DX256", "MKL26Z64", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "at90usb1286", "at90usb646", "atmega16u2", "atmega328p", "atmega32a", "atmega32u2", "atmega32u4", "attiny85", "cortex-m4", "unknown"] }, "bootloader": { "type": "string", diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index 47506bc92dc..c9864ea2de7 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -106,6 +106,7 @@ Example: ["A7", "B1"], [null, "B2"] ] + } } ``` diff --git a/lib/python/qmk/cli/generate/info_json.py b/lib/python/qmk/cli/generate/info_json.py index fba4b1c0140..f3fc54ddcf1 100755 --- a/lib/python/qmk/cli/generate/info_json.py +++ b/lib/python/qmk/cli/generate/info_json.py @@ -4,14 +4,41 @@ Compile an info.json for a particular keyboard and pretty-print it. """ import json +from jsonschema import Draft7Validator, validators from milc import cli -from qmk.info_json_encoder import InfoJSONEncoder from qmk.decorators import automagic_keyboard, automagic_keymap -from qmk.info import info_json +from qmk.info import info_json, _jsonschema +from qmk.info_json_encoder import InfoJSONEncoder from qmk.path import is_keyboard +def pruning_validator(validator_class): + """Extends Draft7Validator to remove properties that aren't specified in the schema. + """ + validate_properties = validator_class.VALIDATORS["properties"] + + def remove_additional_properties(validator, properties, instance, schema): + for prop in list(instance.keys()): + if prop not in properties: + del instance[prop] + + for error in validate_properties(validator, properties, instance, schema): + yield error + + return validators.extend(validator_class, {"properties": remove_additional_properties}) + + +def strip_info_json(kb_info_json): + """Remove the API-only properties from the info.json. + """ + pruning_draft_7_validator = pruning_validator(Draft7Validator) + schema = _jsonschema('keyboard') + validator = pruning_draft_7_validator(schema).validate + + return validator(kb_info_json) + + @cli.argument('-kb', '--keyboard', help='Keyboard to show info for.') @cli.argument('-km', '--keymap', help='Show the layers for a JSON keymap too.') @cli.subcommand('Generate an info.json file for a keyboard.', hidden=False if cli.config.user.developer else True) @@ -22,7 +49,7 @@ def generate_info_json(cli): """ # Determine our keyboard(s) if not cli.config.generate_info_json.keyboard: - cli.log.error('Missing paramater: --keyboard') + cli.log.error('Missing parameter: --keyboard') cli.subcommands['info'].print_help() return False @@ -32,18 +59,7 @@ def generate_info_json(cli): # Build the info.json file kb_info_json = info_json(cli.config.generate_info_json.keyboard) - pared_down_json = {} - - for key in ('manufacturer', 'maintainer', 'usb', 'keyboard_name', 'width', 'height', 'debounce', 'diode_direction', 'features', 'community_layouts', 'layout_aliases', 'matrix_pins', 'rgblight', 'url'): - if key in kb_info_json: - pared_down_json[key] = kb_info_json[key] - - pared_down_json['layouts'] = {} - if 'layouts' in kb_info_json: - for layout_name, layout in kb_info_json['layouts'].items(): - pared_down_json['layouts'][layout_name] = {} - pared_down_json['layouts'][layout_name]['key_count'] = layout.get('key_count', len(layout['layout'])) - pared_down_json['layouts'][layout_name]['layout'] = layout['layout'] + strip_info_json(kb_info_json) # Display the results - print(json.dumps(pared_down_json, indent=2, cls=InfoJSONEncoder)) + print(json.dumps(kb_info_json, indent=2, cls=InfoJSONEncoder)) diff --git a/lib/python/qmk/cli/generate/layouts.py b/lib/python/qmk/cli/generate/layouts.py index 273870e15c4..b7baae0651d 100755 --- a/lib/python/qmk/cli/generate/layouts.py +++ b/lib/python/qmk/cli/generate/layouts.py @@ -54,6 +54,10 @@ def generate_layouts(cli): if kb_info_json['layouts'][layout_name]['c_macro']: continue + if 'matrix' not in kb_info_json['layouts'][layout_name]['layout'][0]: + cli.log.debug('%s/%s: No matrix data!', cli.config.generate_layouts.keyboard, layout_name) + continue + layout_keys = [] layout_matrix = [['KC_NO' for i in range(col_num)] for i in range(row_num)] diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index 2a7e9185692..0fdccb40489 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -37,26 +37,26 @@ def generate_rules_mk(cli): # Bring in settings for info_key, rule_key in info_to_rules.items(): - rules_mk_lines.append(f'{rule_key} := {kb_info_json[info_key]}') + rules_mk_lines.append(f'{rule_key} ?= {kb_info_json[info_key]}') # Find features that should be enabled if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): if feature == 'bootmagic_lite' and enabled: - rules_mk_lines.append('BOOTMAGIC_ENABLE := lite') + rules_mk_lines.append('BOOTMAGIC_ENABLE ?= lite') else: feature = feature.upper() enabled = 'yes' if enabled else 'no' - rules_mk_lines.append(f'{feature}_ENABLE := {enabled}') + rules_mk_lines.append(f'{feature}_ENABLE ?= {enabled}') # Set the LED driver if 'led_matrix' in kb_info_json and 'driver' in kb_info_json['led_matrix']: driver = kb_info_json['led_matrix']['driver'] - rules_mk_lines.append(f'LED_MATRIX_DRIVER = {driver}') + rules_mk_lines.append(f'LED_MATRIX_DRIVER ?= {driver}') # Add community layouts if 'community_layouts' in kb_info_json: - rules_mk_lines.append(f'LAYOUTS = {" ".join(kb_info_json["community_layouts"])}') + rules_mk_lines.append(f'LAYOUTS ?= {" ".join(kb_info_json["community_layouts"])}') # Show the results rules_mk = '\n'.join(rules_mk_lines) + '\n' diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 675832c5068..6a643070fd6 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -26,5 +26,5 @@ ROW_LETTERS = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop' LED_INDICATORS = { 'caps_lock': 'LED_CAPS_LOCK_PIN', 'num_lock': 'LED_NUM_LOCK_PIN', - 'scrol_lock': 'LED_SCROLL_LOCK_PIN' + 'scrol_lock': 'LED_SCROLL_LOCK_PIN', } diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 28c281a4bca..0ea5136a977 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -1,6 +1,7 @@ """Functions that help us generate and use info.json files. """ import json +from collections.abc import Mapping from glob import glob from pathlib import Path @@ -140,6 +141,8 @@ def _json_load(json_file): def _jsonschema(schema_name): """Read a jsonschema file from disk. + + FIXME(skullydazed/anyone): Refactor to make this a public function. """ schema_path = Path(f'data/schemas/{schema_name}.jsonschema') @@ -638,49 +641,44 @@ def unknown_processor_rules(info_data, rules): return info_data +def deep_update(origdict, newdict): + """Update a dictionary in place, recursing to do a deep copy. + """ + for key, value in newdict.items(): + if isinstance(value, Mapping): + origdict[key] = deep_update(origdict.get(key, {}), value) + + else: + origdict[key] = value + + return origdict + + def merge_info_jsons(keyboard, info_data): """Return a merged copy of all the info.json files for a keyboard. """ for info_file in find_info_json(keyboard): # Load and validate the JSON data - try: - new_info_data = _json_load(info_file) - keyboard_validate(new_info_data) - - except jsonschema.ValidationError as e: - json_path = '.'.join([str(p) for p in e.absolute_path]) - cli.log.error('Invalid info.json data: %s: %s: %s', info_file, json_path, e.message) - continue + new_info_data = _json_load(info_file) if not isinstance(new_info_data, dict): _log_error(info_data, "Invalid file %s, root object should be a dictionary." % (str(info_file),)) continue - # Copy whitelisted keys into `info_data` - for key in ('debounce', 'diode_direction', 'indicators', 'keyboard_name', 'manufacturer', 'identifier', 'url', 'maintainer', 'processor', 'bootloader', 'width', 'height'): - if key in new_info_data: - info_data[key] = new_info_data[key] + try: + keyboard_validate(new_info_data) + except jsonschema.ValidationError as e: + json_path = '.'.join([str(p) for p in e.absolute_path]) + cli.log.error('Not including data from file: %s', info_file) + cli.log.error('\t%s: %s', json_path, e.message) + continue - # Deep merge certain keys - # FIXME(skullydazed/anyone): this should be generalized more so that we can inteligently merge more than one level deep. It would be nice if we could filter on valid keys too. That may have to wait for a future where we use openapi or something. - for key in ('features', 'layout_aliases', 'led_matrix', 'matrix_pins', 'rgblight', 'usb'): - if key in new_info_data: - if key not in info_data: - info_data[key] = {} + # Mark the layouts as coming from json + for layout in new_info_data.get('layouts', {}).values(): + layout['c_macro'] = False - info_data[key].update(new_info_data[key]) - - # Merge the layouts - if 'community_layouts' in new_info_data: - if 'community_layouts' in info_data: - for layout in new_info_data['community_layouts']: - if layout not in info_data['community_layouts']: - info_data['community_layouts'].append(layout) - else: - info_data['community_layouts'] = new_info_data['community_layouts'] - - if 'layouts' in new_info_data: - _merge_layouts(info_data, new_info_data) + # Update info_data with the new data + deep_update(info_data, new_info_data) return info_data diff --git a/setup.cfg b/setup.cfg index 5ef2f9ba095..baa6a039676 100644 --- a/setup.cfg +++ b/setup.cfg @@ -3,6 +3,8 @@ ignore = # QMK is ok with long lines. E501 + # Conflicts with our yapf config + E231 per_file_ignores = **/__init__.py:F401 From f7b0e803c27b9c8b5404be780e87b7a3c9e243e6 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 10 Jan 2021 09:52:30 +1100 Subject: [PATCH 051/145] ChibiOS conf migrations... take 5 (#11414) * ChibiOS conf upgrade for handwired/sono1 handwired/sono1 - 4453480576b0bd60f5962e5c3c287cf0f53f7197 * Fixup build error for mechlovin/tmkl. --- keyboards/handwired/sono1/chconf.h | 729 ++-------------------------- keyboards/handwired/sono1/halconf.h | 536 +------------------- keyboards/handwired/sono1/mcuconf.h | 218 +-------- keyboards/mechlovin/tmkl/rules.mk | 1 + 4 files changed, 68 insertions(+), 1416 deletions(-) diff --git a/keyboards/handwired/sono1/chconf.h b/keyboards/handwired/sono1/chconf.h index f5e471640c5..4d09f7b7dd5 100644 --- a/keyboards/handwired/sono1/chconf.h +++ b/keyboards/handwired/sono1/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_TM FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** @} */ +#define CH_CFG_USE_MEMPOOLS FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_OBJ_FIFOS FALSE -/** @} */ +#define CH_CFG_USE_PIPES FALSE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_DYNAMIC FALSE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/handwired/sono1/halconf.h b/keyboards/handwired/sono1/halconf.h index ff5ae7e8a5f..0ed8198dc49 100644 --- a/keyboards/handwired/sono1/halconf.h +++ b/keyboards/handwired/sono1/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/handwired/sono1/mcuconf.h b/keyboards/handwired/sono1/mcuconf.h index a645d3c5d5c..6a41e22fed2 100644 --- a/keyboards/handwired/sono1/mcuconf.h +++ b/keyboards/handwired/sono1/mcuconf.h @@ -1,209 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/mechlovin/tmkl/rules.mk b/keyboards/mechlovin/tmkl/rules.mk index 2673ab3c99e..bbe320ff51a 100644 --- a/keyboards/mechlovin/tmkl/rules.mk +++ b/keyboards/mechlovin/tmkl/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable From 75111e967fb3fa6239884a0c85635e7ede46bc29 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 10 Jan 2021 09:52:49 +1100 Subject: [PATCH 052/145] Disable subsystems repo-wide. (#11449) --- keyboards/chavdai40/chconf.h | 18 --------- keyboards/ergodox_infinity/chconf.h | 19 +++------- keyboards/infinity60/chconf.h | 18 +-------- keyboards/k_type/chconf.h | 18 --------- keyboards/keebwerk/mega/chconf.h | 45 ----------------------- keyboards/peiorisboards/ixora/chconf.h | 18 --------- keyboards/phoenix/chconf.h | 16 -------- keyboards/polilla/chconf.h | 20 ---------- keyboards/tkw/stoutgat/v2/f411/chconf.h | 16 -------- keyboards/vinta/chconf.h | 18 --------- keyboards/whitefox/chconf.h | 19 +++------- keyboards/zvecr/zv48/f401/chconf.h | 41 --------------------- keyboards/zvecr/zv48/f411/chconf.h | 41 --------------------- platforms/chibios/common/configs/chconf.h | 22 +++++------ 14 files changed, 22 insertions(+), 307 deletions(-) delete mode 100644 keyboards/keebwerk/mega/chconf.h delete mode 100644 keyboards/zvecr/zv48/f401/chconf.h delete mode 100644 keyboards/zvecr/zv48/f411/chconf.h diff --git a/keyboards/chavdai40/chconf.h b/keyboards/chavdai40/chconf.h index 2919eae74b6..bd6fd35ed92 100644 --- a/keyboards/chavdai40/chconf.h +++ b/keyboards/chavdai40/chconf.h @@ -23,23 +23,5 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/ergodox_infinity/chconf.h b/keyboards/ergodox_infinity/chconf.h index 05d0ba5301d..d04f3dcf6d2 100644 --- a/keyboards/ergodox_infinity/chconf.h +++ b/keyboards/ergodox_infinity/chconf.h @@ -25,23 +25,14 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE +#define CH_CFG_USE_REGISTRY TRUE + +#define CH_CFG_USE_WAITEXIT TRUE #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_HEAP TRUE -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE +#define CH_CFG_USE_DYNAMIC TRUE #include_next - diff --git a/keyboards/infinity60/chconf.h b/keyboards/infinity60/chconf.h index baefb4605f7..41a4253b28d 100644 --- a/keyboards/infinity60/chconf.h +++ b/keyboards/infinity60/chconf.h @@ -25,23 +25,7 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE +#define CH_CFG_USE_MAILBOXES TRUE #include_next diff --git a/keyboards/k_type/chconf.h b/keyboards/k_type/chconf.h index 9caeb446d50..ffa338fe0b3 100644 --- a/keyboards/k_type/chconf.h +++ b/keyboards/k_type/chconf.h @@ -25,23 +25,5 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/keebwerk/mega/chconf.h b/keyboards/keebwerk/mega/chconf.h deleted file mode 100644 index ab7734fb0af..00000000000 --- a/keyboards/keebwerk/mega/chconf.h +++ /dev/null @@ -1,45 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebwerk/mega/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#define CH_CFG_USE_MESSAGES_PRIORITY TRUE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -#include_next - diff --git a/keyboards/peiorisboards/ixora/chconf.h b/keyboards/peiorisboards/ixora/chconf.h index 34c7bf78469..e4664d2c6e6 100644 --- a/keyboards/peiorisboards/ixora/chconf.h +++ b/keyboards/peiorisboards/ixora/chconf.h @@ -23,23 +23,5 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/phoenix/chconf.h b/keyboards/phoenix/chconf.h index 052587223f8..c6791a55f86 100644 --- a/keyboards/phoenix/chconf.h +++ b/keyboards/phoenix/chconf.h @@ -23,21 +23,5 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/polilla/chconf.h b/keyboards/polilla/chconf.h index 0b810449404..252acdd4188 100644 --- a/keyboards/polilla/chconf.h +++ b/keyboards/polilla/chconf.h @@ -23,25 +23,5 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_DYNAMIC FALSE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/tkw/stoutgat/v2/f411/chconf.h b/keyboards/tkw/stoutgat/v2/f411/chconf.h index 57781f24799..531b724ef98 100644 --- a/keyboards/tkw/stoutgat/v2/f411/chconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/chconf.h @@ -21,21 +21,5 @@ #pragma once -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/vinta/chconf.h b/keyboards/vinta/chconf.h index 0b499f8700f..62469b17617 100644 --- a/keyboards/vinta/chconf.h +++ b/keyboards/vinta/chconf.h @@ -23,23 +23,5 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - #include_next diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h index 26938852f16..43e3f13bb1a 100644 --- a/keyboards/whitefox/chconf.h +++ b/keyboards/whitefox/chconf.h @@ -25,23 +25,14 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE +#define CH_CFG_USE_REGISTRY TRUE + +#define CH_CFG_USE_WAITEXIT TRUE #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_HEAP TRUE -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE +#define CH_CFG_USE_DYNAMIC TRUE #include_next - diff --git a/keyboards/zvecr/zv48/f401/chconf.h b/keyboards/zvecr/zv48/f401/chconf.h deleted file mode 100644 index e036ca89332..00000000000 --- a/keyboards/zvecr/zv48/f401/chconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - -#include_next - diff --git a/keyboards/zvecr/zv48/f411/chconf.h b/keyboards/zvecr/zv48/f411/chconf.h deleted file mode 100644 index 30fb0a1e559..00000000000 --- a/keyboards/zvecr/zv48/f411/chconf.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY TRUE - -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -#define CH_CFG_FACTORY_MAILBOXES TRUE - -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -#define CH_CFG_FACTORY_PIPES TRUE - -#include_next - diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h index 2fad3f769b5..51ec2fb5b88 100644 --- a/platforms/chibios/common/configs/chconf.h +++ b/platforms/chibios/common/configs/chconf.h @@ -172,7 +172,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE +#define CH_CFG_USE_TM FALSE #endif /** @@ -182,7 +182,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE +#define CH_CFG_USE_REGISTRY FALSE #endif /** @@ -193,7 +193,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE +#define CH_CFG_USE_WAITEXIT FALSE #endif /** @@ -250,7 +250,7 @@ * @note Requires @p CH_CFG_USE_MUTEXES. */ #if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE +#define CH_CFG_USE_CONDVARS FALSE #endif /** @@ -295,7 +295,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE +#define CH_CFG_USE_MESSAGES FALSE #endif /** @@ -320,7 +320,7 @@ * @note Requires @p CH_CFG_USE_SEMAPHORES. */ #if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE +#define CH_CFG_USE_MAILBOXES FALSE #endif /** @@ -345,7 +345,7 @@ * @note Mutexes are recommended. */ #if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE +#define CH_CFG_USE_HEAP FALSE #endif /** @@ -356,7 +356,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE +#define CH_CFG_USE_MEMPOOLS FALSE #endif /** @@ -367,7 +367,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE +#define CH_CFG_USE_OBJ_FIFOS FALSE #endif /** @@ -378,7 +378,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE +#define CH_CFG_USE_PIPES FALSE #endif /** @@ -391,7 +391,7 @@ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ #if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE +#define CH_CFG_USE_DYNAMIC FALSE #endif /** @} */ From eaa9106ec74591593e638ac015a5c90d17b30612 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 9 Jan 2021 20:18:47 -0800 Subject: [PATCH 053/145] Add support for specifying BOARD in info.json (#11492) * add support for specifying BOARD in info.json * move BOARD from rules.mk to info.json for clueboard * fix keyboards that do not require board * remove out of compliance values --- data/schemas/keyboard.jsonschema | 5 +++++ keyboards/clueboard/60/info.json | 1 + keyboards/clueboard/60/rules.mk | 2 -- keyboards/clueboard/66/rev4/info.json | 1 + keyboards/clueboard/66/rev4/rules.mk | 1 - keyboards/clueboard/66_hotswap/gen1/info.json | 1 + keyboards/clueboard/66_hotswap/gen1/rules.mk | 1 - keyboards/clueboard/california/info.json | 1 + keyboards/clueboard/california/rules.mk | 1 - keyboards/cmm_studio/saka68/info.json | 2 -- lib/python/qmk/cli/generate/rules_mk.py | 4 +++- lib/python/qmk/info.py | 8 +++++++- 12 files changed, 19 insertions(+), 9 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index f76c7fd1895..0b3d6f393dc 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -27,6 +27,11 @@ "type": "string", "enum": ["MK20DX128", "MK20DX256", "MKL26Z64", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "at90usb1286", "at90usb646", "atmega16u2", "atmega328p", "atmega32a", "atmega32u2", "atmega32u4", "attiny85", "cortex-m4", "unknown"] }, + "board": { + "type": "string", + "minLength": 2, + "pattern": "^[a-zA-Z_][0-9a-zA-Z_]*$" + }, "bootloader": { "type": "string", "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "stm32-dfu", "stm32duino", "unknown", "USBasp"] diff --git a/keyboards/clueboard/60/info.json b/keyboards/clueboard/60/info.json index 2da993437c4..a68081daf00 100644 --- a/keyboards/clueboard/60/info.json +++ b/keyboards/clueboard/60/info.json @@ -6,6 +6,7 @@ "width": 15, "debounce": 6, "processor": "STM32F303", + "board": "QMK_PROTON_C", "diode_direction": "COL2ROW", "features": { "audio": true, diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk index 6bc7eb7619f..c73b4c4731b 100644 --- a/keyboards/clueboard/60/rules.mk +++ b/keyboards/clueboard/60/rules.mk @@ -1,4 +1,2 @@ -BOARD = QMK_PROTON_C - # project specific files SRC = led.c diff --git a/keyboards/clueboard/66/rev4/info.json b/keyboards/clueboard/66/rev4/info.json index aef1dee7aa7..9c8fcbef5e4 100644 --- a/keyboards/clueboard/66/rev4/info.json +++ b/keyboards/clueboard/66/rev4/info.json @@ -6,6 +6,7 @@ "width": 16.5, "debounce": 5, "processor": "STM32F303", + "board": "QMK_PROTON_C", "diode_direction": "COL2ROW", "features": { "audio": true, diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk index 14a7fa7b715..6e7633bfe01 100644 --- a/keyboards/clueboard/66/rev4/rules.mk +++ b/keyboards/clueboard/66/rev4/rules.mk @@ -1,2 +1 @@ -BOARD = QMK_PROTON_C # This file intentionally left blank diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json index 18afe541268..bcf66e8afc0 100644 --- a/keyboards/clueboard/66_hotswap/gen1/info.json +++ b/keyboards/clueboard/66_hotswap/gen1/info.json @@ -6,6 +6,7 @@ "width": 16.5, "debounce": 5, "processor": "STM32F303", + "board": "QMK_PROTON_C", "diode_direction": "COL2ROW", "features": { "audio": true, diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index e23f9a4b3ce..33cf11a793d 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,4 +1,3 @@ -BOARD = QMK_PROTON_C LED_MATRIX_DRIVER = IS31FL3731 # project specific files diff --git a/keyboards/clueboard/california/info.json b/keyboards/clueboard/california/info.json index 02c06ce5138..e40b2338cd1 100644 --- a/keyboards/clueboard/california/info.json +++ b/keyboards/clueboard/california/info.json @@ -3,6 +3,7 @@ "url": "", "maintainer": "skullydazed", "processor": "STM32F303", + "board": "QMK_PROTON_C", "matrix_pins": { "direct": [ ["A10", "A9"], diff --git a/keyboards/clueboard/california/rules.mk b/keyboards/clueboard/california/rules.mk index 14a7fa7b715..6e7633bfe01 100644 --- a/keyboards/clueboard/california/rules.mk +++ b/keyboards/clueboard/california/rules.mk @@ -1,2 +1 @@ -BOARD = QMK_PROTON_C # This file intentionally left blank diff --git a/keyboards/cmm_studio/saka68/info.json b/keyboards/cmm_studio/saka68/info.json index 75a78649bc3..ac6d0465ae2 100644 --- a/keyboards/cmm_studio/saka68/info.json +++ b/keyboards/cmm_studio/saka68/info.json @@ -1,6 +1,4 @@ { - "keyboard_name": "", - "url": "", "maintainer": "qmk", "width": 17.25, "height": 5, diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index 0fdccb40489..b262e3c6661 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -7,6 +7,7 @@ from qmk.info import info_json from qmk.path import is_keyboard, normpath info_to_rules = { + 'board': 'BOARD', 'bootloader': 'BOOTLOADER', 'processor': 'MCU', } @@ -37,7 +38,8 @@ def generate_rules_mk(cli): # Bring in settings for info_key, rule_key in info_to_rules.items(): - rules_mk_lines.append(f'{rule_key} ?= {kb_info_json[info_key]}') + if info_key in kb_info_json: + rules_mk_lines.append(f'{rule_key} ?= {kb_info_json[info_key]}') # Find features that should be enabled if 'features' in kb_info_json: diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 0ea5136a977..cc81f7a0866 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -462,7 +462,7 @@ def _extract_rules_mk(info_data): """Pull some keyboard information from existing rules.mk files """ rules = rules_mk(info_data['keyboard_folder']) - mcu = rules.get('MCU') + mcu = rules.get('MCU', info_data.get('processor')) if mcu in CHIBIOS_PROCESSORS: arm_processor_rules(info_data, rules) @@ -594,6 +594,12 @@ def arm_processor_rules(info_data, rules): elif 'ARM_ATSAM' in rules: info_data['platform'] = 'ARM_ATSAM' + if 'BOARD' in rules: + if 'board' in info_data: + _log_warning(info_data, 'Board is specified in both info.json and rules.mk, the rules.mk value wins.') + + info_data['board'] = rules['BOARD'] + return info_data From e00bb81c49c8f0d12c4e6f659584897034fe2978 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 11 Jan 2021 09:59:04 +1100 Subject: [PATCH 054/145] ChibiOS conf migrations... take 6 (#11504) * ChibiOS conf upgrade for cannonkeys/sagittarius cannonkeys/sagittarius - 953626d1b87574290016ed09caaf5e3fa7b73189 * ChibiOS conf upgrade for evolv evolv - c2f56a35ef1d11b002f9306ed2814ac0447e68c4 --- keyboards/cannonkeys/sagittarius/chconf.h | 729 +-------------------- keyboards/cannonkeys/sagittarius/halconf.h | 536 +-------------- keyboards/cannonkeys/sagittarius/mcuconf.h | 185 +----- keyboards/evolv/chconf.h | 729 +-------------------- keyboards/evolv/halconf.h | 536 +-------------- keyboards/evolv/mcuconf.h | 185 +----- 6 files changed, 136 insertions(+), 2764 deletions(-) diff --git a/keyboards/cannonkeys/sagittarius/chconf.h b/keyboards/cannonkeys/sagittarius/chconf.h index 03f63da36a8..46eb3c92770 100644 --- a/keyboards/cannonkeys/sagittarius/chconf.h +++ b/keyboards/cannonkeys/sagittarius/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MEMCORE TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/sagittarius/halconf.h b/keyboards/cannonkeys/sagittarius/halconf.h index 921803762ea..e993b78a383 100644 --- a/keyboards/cannonkeys/sagittarius/halconf.h +++ b/keyboards/cannonkeys/sagittarius/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/sagittarius/mcuconf.h b/keyboards/cannonkeys/sagittarius/mcuconf.h index 43fe0a462ef..e4b9e3df38a 100644 --- a/keyboards/cannonkeys/sagittarius/mcuconf.h +++ b/keyboards/cannonkeys/sagittarius/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/evolv/chconf.h b/keyboards/evolv/chconf.h index 4640ff5332b..c86f723fb43 100644 --- a/keyboards/evolv/chconf.h +++ b/keyboards/evolv/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/evolv/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/evolv/halconf.h b/keyboards/evolv/halconf.h index df71dd64c42..dd7da1bad50 100644 --- a/keyboards/evolv/halconf.h +++ b/keyboards/evolv/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/evolv/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/evolv/mcuconf.h b/keyboards/evolv/mcuconf.h index 4b5afe73ecc..b9fa5fcdf5d 100644 --- a/keyboards/evolv/mcuconf.h +++ b/keyboards/evolv/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/evolv/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From a15c9057a1f52e28229dd466f51ae4f4f9ecdb81 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 10 Jan 2021 20:47:58 -0800 Subject: [PATCH 055/145] Document how to add data driven configurations (#11502) * describe how data driven configuration works * Apply suggestions from code review Co-authored-by: ridingqwerty Co-authored-by: Erovia Co-authored-by: ridingqwerty Co-authored-by: Erovia --- docs/_summary.md | 1 + docs/data_driven_config.md | 59 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 60 insertions(+) create mode 100644 docs/data_driven_config.md diff --git a/docs/_summary.md b/docs/_summary.md index 19498f6a205..8d401bb40ce 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -159,6 +159,7 @@ * [Contributing to QMK](contributing.md) * [Translating the QMK Docs](translating.md) * [Config Options](config_options.md) + * [Data Driven Configuration](data_driven_config.md) * [Make Documentation](getting_started_make_guide.md) * [Documentation Best Practices](documentation_best_practices.md) * [Documentation Templates](documentation_templates.md) diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md new file mode 100644 index 00000000000..7e4f2328469 --- /dev/null +++ b/docs/data_driven_config.md @@ -0,0 +1,59 @@ +# Data Driven Configuration + +This page describes how QMK's data driven JSON configuration system works. It is aimed at developers who want to work on QMK itself. + +## History + +Historically QMK has been configured through a combination of two mechanisms- `rules.mk` and `config.h`. While this worked well when QMK was only a handful of keyboards we've grown to encompass nearly 1500 supported keyboards. That extrapolates out to 6000 configuration files under `keyboards/` alone! The freeform nature of these files and the unique patterns people have used to avoid duplication have made ongoing maintenance a challenge, and a large number of our keyboards follow patterns that are outdated and sometimes harder to understand. + +We have also been working on bringing the power of QMK to people who aren't comformable with a CLI, and other projects such as VIA are working to make using QMK as easy as installing a program. These tools need information about how a keyboard is laid out or what pins and features are available so that users can take full advantage of QMK. We introduced `info.json` as a first step towards this. The QMK API is an effort to combine these 3 sources of information- `config.h`, `rules.mk`, and `info.json`- into a single source of truth that end-user tools can use. + +Now we have support for generating `rules.mk` and `config.h` values from `info.json`, allowing us to have a single source of truth. This will allow us to use automated tooling to maintain keyboards saving a lot of time and maintenance work. + +## Overview + +On the C side of things nothing really changes. When you need to create a new rule or define you follow the same process: + +1. Add it to `docs/config_options.md` +1. Set a default in the appropriate core file +1. Add your `ifdef` and/or `#ifdef` statements as needed + +You will then need to add support for your new configuration to `info.json`. The basic process is: + +1. Add it to the schema in `data/schemas/keyboards.jsonschema` +1. Add code to extract it from `config.h`/`rules.mk` to `lib/python/qmk/info.py` +1. Add code to generate it to one of: + * `lib/python/qmk/cli/generate/config_h.py` + * `lib/python/qmk/cli/generate/rules_mk.py` + +## Adding an option to info.json + +This section describes adding support for a `config.h`/`rules.mk` value to info.json. + +### Add it to the schema + +QMK maintains schema files in `data/schemas`. The values that go into keyboard-specific `info.json` files are kept in `keyboard.jsonschema`. Any value you want to make available to end users to edit must go in here. + +In some cases you can simply add a new top-level key. Some examples to follow are `keyboard_name`, `maintainer`, `processor`, and `url`. This is appropriate when your option is self-contained and not directly related to other options. In other cases you should group like options together in an `object`. This is particularly true when adding support for a feature. Some examples to follow for this are `indicators`, `matrix_pins`, and `rgblight`. If you are not sure how to integrate your new option(s) [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there. + +### Add code to extract it + +Whenever QMK generates a complete `info.json` it extracts information from `config.h` and `rules.mk`. You will need to add code for your new config value to `lib/python/qmk/info.py`. Typically this means adding a new `_extract_()` function and then calling your function in either `_extract_config_h()` or `_extract_rules_mk()`. + +If you are not sure how to edit this file or are not comfortable with Python [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and someone can help you with this part. + +### Add code to generate it + +The final piece of the puzzle is providing your new option to the build system. This is done by generating two files: + +* `.build/obj_/src/info_config.h` +* `.build/obj_/src/rules.mk` + +These two files are generated by the code here: + +* `lib/python/qmk/cli/generate/config_h.py` +* `lib/python/qmk/cli/generate/rules_mk.py` + +For `config.h` values you'll need to write a function for your rule(s) and call that function in `generate_config_h()`. + +If you have a new top-level `info.json` key for `rules.mk` you can simply add your keys to `info_to_rules` at the top of `lib/python/qmk/cli/generate/rules_mk.py`. Otherwise you'll need to create a new if block for your feature in `generate_rules_mk()`. From a06dda15e44438f11da1e4f7c47e9c747c9dc273 Mon Sep 17 00:00:00 2001 From: Aplyard <40563350+Aplyard@users.noreply.github.com> Date: Mon, 11 Jan 2021 07:31:42 +0200 Subject: [PATCH 056/145] [Keyboard] Added rev2 & move rev1+rev2 to parent folder (#10973) * rev2 and move parent folder Moved aplx6 to parent folder, renamed it to rev1 and added rev2 * Update keyboards/aplx/aplx6/rev1/config.h Co-authored-by: Drashna Jaelre * Update keyboards/aplx/aplx6/rev2/config.h Co-authored-by: Drashna Jaelre * Update keyboards/aplx/aplx6/rev2/rev2.c Co-authored-by: Drashna Jaelre * Update keyboards/aplx/aplx6/rev2/rules.mk Co-authored-by: Drashna Jaelre * license * Update keyboards/aplx/aplx6/rev2/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Update keyboards/aplx/aplx6/rev2/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Update keyboards/aplx/aplx6/rev2/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/aplx/aplx6/rev2/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/aplx/aplx6/rev2/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/aplx/aplx6/rev2/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/aplx/aplx6/rev2/readme.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * layer definition * parent folder rename after suggestion * build instructions * update Hardware Availability links Co-authored-by: Drashna Jaelre Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> --- .../{aplx6 => aplyard/aplx6/rev1}/config.h | 2 - .../aplx6/rev1}/keymaps/default/keymap.c | 4 +- .../{aplx6 => aplyard/aplx6/rev1}/readme.md | 4 +- .../aplx6.c => aplyard/aplx6/rev1/rev1.c} | 2 +- .../aplx6.h => aplyard/aplx6/rev1/rev1.h} | 0 .../{aplx6 => aplyard/aplx6/rev1}/rules.mk | 0 keyboards/aplyard/aplx6/rev2/config.h | 49 ++++++ .../aplx6/rev2/keymaps/default/keymap.c | 146 ++++++++++++++++++ keyboards/aplyard/aplx6/rev2/readme.md | 39 +++++ keyboards/aplyard/aplx6/rev2/rev2.c | 16 ++ keyboards/aplyard/aplx6/rev2/rev2.h | 28 ++++ keyboards/aplyard/aplx6/rev2/rules.mk | 25 +++ 12 files changed, 308 insertions(+), 7 deletions(-) rename keyboards/{aplx6 => aplyard/aplx6/rev1}/config.h (96%) rename keyboards/{aplx6 => aplyard/aplx6/rev1}/keymaps/default/keymap.c (96%) rename keyboards/{aplx6 => aplyard/aplx6/rev1}/readme.md (93%) rename keyboards/{aplx6/aplx6.c => aplyard/aplx6/rev1/rev1.c} (97%) rename keyboards/{aplx6/aplx6.h => aplyard/aplx6/rev1/rev1.h} (100%) rename keyboards/{aplx6 => aplyard/aplx6/rev1}/rules.mk (100%) create mode 100644 keyboards/aplyard/aplx6/rev2/config.h create mode 100644 keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c create mode 100644 keyboards/aplyard/aplx6/rev2/readme.md create mode 100644 keyboards/aplyard/aplx6/rev2/rev2.c create mode 100644 keyboards/aplyard/aplx6/rev2/rev2.h create mode 100644 keyboards/aplyard/aplx6/rev2/rules.mk diff --git a/keyboards/aplx6/config.h b/keyboards/aplyard/aplx6/rev1/config.h similarity index 96% rename from keyboards/aplx6/config.h rename to keyboards/aplyard/aplx6/rev1/config.h index 8db06d93cfb..98a7381cc74 100644 --- a/keyboards/aplx6/config.h +++ b/keyboards/aplyard/aplx6/rev1/config.h @@ -25,7 +25,6 @@ along with this program. If not, see . #define DEVICE_VER 0x0001 #define MANUFACTURER Aplyard #define PRODUCT Aplx6 -#define DESCRIPTION Aplx6 MediaPad /* key matrix size */ #define MATRIX_ROWS 2 @@ -46,4 +45,3 @@ along with this program. If not, see . /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - diff --git a/keyboards/aplx6/keymaps/default/keymap.c b/keyboards/aplyard/aplx6/rev1/keymaps/default/keymap.c similarity index 96% rename from keyboards/aplx6/keymaps/default/keymap.c rename to keyboards/aplyard/aplx6/rev1/keymaps/default/keymap.c index 4c4f612a381..91ed943f38b 100644 --- a/keyboards/aplx6/keymaps/default/keymap.c +++ b/keyboards/aplyard/aplx6/rev1/keymaps/default/keymap.c @@ -15,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | |||||| |-----|-----|-----| | * '--------------------------------' */ - [_MAIN] = LAYOUT( + [_MAIN] = LAYOUT( KC_MPLY, KC_VOLU, MO(1), KC_MPRV, KC_VOLD, KC_MNXT ), @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '--------------------------------' */ - [_FN] = LAYOUT( + [_FN] = LAYOUT( KC_CALC, KC_PGUP, _______, KC_MYCM, KC_PGDN, RESET ) diff --git a/keyboards/aplx6/readme.md b/keyboards/aplyard/aplx6/rev1/readme.md similarity index 93% rename from keyboards/aplx6/readme.md rename to keyboards/aplyard/aplx6/rev1/readme.md index 55e73ea2da5..7369cbfd412 100644 --- a/keyboards/aplx6/readme.md +++ b/keyboards/aplyard/aplx6/rev1/readme.md @@ -12,11 +12,11 @@ Just wire them to any of the unused ProMicro pins. Don't forget to edit-uncommen * Keyboard Maintainer: [Aplyard](https://github.com/Aplyard) * Hardware Supported: Aplx6 PCB, Pro Micro (ATmega32U4) -* Hardware Availability: [GitHub](https://github.com/Aplyard/Aplx6) +* Hardware Availability: [GitHub](https://github.com/Aplyard/aplx6/tree/master/rev1) Make example for this keyboard (after setting up your build environment): - make aplx6:default + make aplyard/aplx6/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/aplx6/aplx6.c b/keyboards/aplyard/aplx6/rev1/rev1.c similarity index 97% rename from keyboards/aplx6/aplx6.c rename to keyboards/aplyard/aplx6/rev1/rev1.c index 3a294c19983..7f6f8a3224e 100644 --- a/keyboards/aplx6/aplx6.c +++ b/keyboards/aplyard/aplx6/rev1/rev1.c @@ -15,5 +15,5 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "aplx6.h" +#include "rev1.h" diff --git a/keyboards/aplx6/aplx6.h b/keyboards/aplyard/aplx6/rev1/rev1.h similarity index 100% rename from keyboards/aplx6/aplx6.h rename to keyboards/aplyard/aplx6/rev1/rev1.h diff --git a/keyboards/aplx6/rules.mk b/keyboards/aplyard/aplx6/rev1/rules.mk similarity index 100% rename from keyboards/aplx6/rules.mk rename to keyboards/aplyard/aplx6/rev1/rules.mk diff --git a/keyboards/aplyard/aplx6/rev2/config.h b/keyboards/aplyard/aplx6/rev2/config.h new file mode 100644 index 00000000000..b4bb7d62ad9 --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/config.h @@ -0,0 +1,49 @@ +/* +Copyright 2020 April Aplyard + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xE0E0 +#define PRODUCT_ID 0x0040 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Aplyard +#define PRODUCT Aplx6 + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 3 + +/* 9Key PCB default pin-out */ +#define MATRIX_ROW_PINS { B4, B5 } +#define MATRIX_COL_PINS { C6, D7, E6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define TAPPING_TERM 200 + +/* Encoder */ +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } +#define ENCODER_RESOLUTION 4 +#define ENCODER_DIRECTION_FLIP + +#define TAP_CODE_DELAY 50 diff --git a/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c b/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c new file mode 100644 index 00000000000..c773fb988cf --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c @@ -0,0 +1,146 @@ + /* Copyright 2020 Aplyard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _MEDIA, + _DOC, + _POWER +}; + +#define KC_COPY LCTL(KC_C) //Mac, change it to LGUI(KC_C) +#define KC_CUT LCTL(KC_X) // >> >> LGUI(KC_X) +#define KC_PASTE LCTL(KC_V) // >> >> LGUI(KC_V) +//#define KC_MY_COMPUTER LGUI(KC_SPC) //Uncomment this for Mac Spotlight Search + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap __MEDIA: Default Layer + * ,----------------------------------. + * | .-------. / / / / / / | + * | | | |------|------|------| | + * | | Pro | | Mute | Play |Vol+/-| | + * | | Micro | |------|------|------| | + * | | | |----------------------| + * | | | |------|------|------| | + * | '-------' | Prev | Stop | Next | | + * | APLX6 |------|------|------| | + * '----------------------------------' + */ + [_MEDIA] = LAYOUT( + KC_MUTE, KC_MPLY, TO(1), + KC_MPRV, KC_MSTP, KC_MNXT + ), + /* Keymap __DOC + * ,----------------------------------. + * | .-------. / / / / / / | + * | | | |------|------|------| | + * | | Pro | | Home | PgUp | L/R | | + * | | Micro | |------|------|------| | + * | | | |----------------------| + * | | | |------|------|------| | + * | '-------' | End | PgDn | Ins | | + * | APLX6 |------|------|------| | + * '----------------------------------' + */ + [_DOC] = LAYOUT( + KC_HOME, KC_PGUP, TO(2), + KC_END, KC_PGDN, KC_INS + ), + /* Keymap __DOC + * ,----------------------------------. + * | .-------. / / / / / / | + * | | | |------|------|------| | + * | | Pro | | Calc | MyPc |Bright| | + * | | Micro | |------|------|------| | + * | | | |----------------------| + * | | | |------|------|------| | + * | '-------' | Copy | Cut |Paste | | + * | APLX6 |------|------|------| | + * '----------------------------------' + */ + [_POWER] = LAYOUT( + KC_CALC, KC_MY_COMPUTER, TO(0), + KC_COPY, KC_CUT, KC_PASTE + ) +}; + +#if defined(OLED_DRIVER_ENABLE) +static void render_logo(void) { + //Logo for _MEDIA + static const char PROGMEM logo1[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128, 64, 0, 32, 32,160,160,160,160, 32, 32, 0, 64,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128, 64,160,144, 8,252,129, 0, 60,126,255,255,255,255,255,255,255,255,126, 60, 0,129,252, 8,144,160, 64,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,254, 0, 0, 0, 0, 0, 0,144,144,144,144,240, 0, 0, 48,224,128, 0, 0,224, 48, 0,192,224,176,144,144,240,192, 0, 0,240,240, 16, 16, 0,128,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 24, 12,254,254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 14, 21, 42, 17, 96,135, 88,162, 64, 68,128,137,137,137,137,137,136,128, 68, 64,162, 88,199, 32, 17, 42, 21, 14, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 15, 8, 8, 8, 8, 0, 7, 15, 8, 8, 12, 15, 0, 0, 64, 65,111, 60, 15, 1, 0, 0, 3, 7, 12, 8, 8, 8, 0, 0, 0, 15, 15, 0, 0, 0, 8, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 8, 8, 15, 15, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 1, 5, 4, 2, 2, 2, 2, 2, 2, 4, 5, 1, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + //Logo for _DOC + static const char PROGMEM logo2[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,224,160,224,128,224,160,224,128,224,160,224,128,224,160,224,128,224,160,224,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254, 17, 16, 16,224, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 3,254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,254, 0, 0, 0, 0, 0, 0,144,144,144,144,240, 0, 0, 48,224,128, 0, 0,224, 48, 0,192,224,176,144,144,240,192, 0, 0,240,240, 16, 16, 0,128,192, 0, 0, 0, 0, 0, 0, 0, 0, 4, 6,130,194,102, 60, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,127,145,161,225, 32,224,160,224, 32,224,160,224, 32,224,160,224, 32,224,160,224, 32,224,160, 80, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 15, 8, 8, 8, 8, 0, 7, 15, 8, 8, 12, 15, 0, 0, 64, 65,111, 60, 15, 1, 0, 0, 3, 7, 12, 8, 8, 8, 0, 0, 0, 15, 15, 0, 0, 0, 8, 12, 0, 0, 0, 0, 0, 0, 0, 0, 12, 14, 11, 9, 8, 8, 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 3, 0, 3, 2, 3, 0, 3, 2, 3, 0, 3, 2, 3, 0, 3, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + //Logo for _POWER + static const char PROGMEM logo3[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,248,120,254, 58, 30, 8, 4, 4, 4, 2, 2, 4, 4, 4, 8, 30, 58,254,120,248, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,248,145, 38, 68,136,144, 16, 32, 32, 32, 32, 16, 16,136, 68, 34,241,254,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,254, 0, 0, 0, 0, 0, 0,144,144,144,144,240, 0, 0, 48,224,128, 0, 0,224, 48, 0,192,224,176,144,144,240,192, 0, 0,240,240, 16, 16, 0,128,192, 0, 0, 0, 0, 0, 0, 0, 0, 2, 34, 50, 58,110,198, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 63, 35,231, 47,255, 62, 62, 61, 61, 61, 61, 61, 61, 62, 62, 63,239, 39,227, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 15, 8, 8, 8, 8, 0, 7, 15, 8, 8, 4, 15, 0, 0, 64, 65,111, 60, 15, 1, 0, 0, 3, 7, 12, 8, 8, 8, 0, 0, 0, 15, 15, 0, 0, 0, 8, 12, 0, 0, 0, 0, 0, 0, 0, 0, 8, 8, 8, 12, 6, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + //Switch between logos + switch (get_highest_layer(layer_state)) { + case 1: + oled_write_raw_P(logo2, sizeof(logo2)); + break; + case 2: + oled_write_raw_P(logo3, sizeof(logo3)); + break; + default: + oled_write_raw_P(logo1, sizeof(logo1)); + } +} + +void oled_task_user(void) { + render_logo(); +} +#endif + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case 1: + if (clockwise) { + tap_code(KC_RIGHT); //edit here your _DOC layer(2) encoder keycode + } else { + tap_code(KC_LEFT); //edit here your _DOC layer(2) encoder keycode + } + break; + case 2: + if (clockwise) { + tap_code(KC_BRIU); //edit here your _POWER layer(3) encoder keycode + } else { + tap_code(KC_BRID); //edit here your _POWER layer(3) encoder keycode + } + break; + default: + if (clockwise) { + tap_code(KC_VOLU); //edit here your _MEDIA layer(1) encoder keycode + } else { + tap_code(KC_VOLD); //edit here your _MEDIA layer(1) encoder keycode + } + } + } +} diff --git a/keyboards/aplyard/aplx6/rev2/readme.md b/keyboards/aplyard/aplx6/rev2/readme.md new file mode 100644 index 00000000000..fc209fa5712 --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/readme.md @@ -0,0 +1,39 @@ +# Aplx6 rev2 + +![Top View](https://i.imgur.com/92KlXazl.jpeg) + +An updated encoder version, implementing music, browser and document shortcuts. Designed to be assembled as a sandwich with a blank PCB, using M2.5 screws and spacers, your choice of MX- or Alps-compatible switches, and 1N4148 diodes. + +## New features +* Encoder (with push button for cycling layers) +* Oled display for some fancy logos +* More layers + +## Firmware +* Keyboard Maintainer: [Aplyard](https://github.com/Aplyard) +* Hardware Supported: Aplx6 PCB, Pro Micro (ATmega32U4) +* Hardware Availability: [GitHub](https://github.com/Aplyard/aplx6/tree/master/rev2) + +Make example for this keyboard (after setting up your build environment): + + make aplyard/aplx6/rev2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +--- +****Designed in**:** +[KiCad](https://github.com/KiCad) + +**Components Footprints & Libraries :** +[MX_Alps_Hybrid](https://github.com/tyetye/MX_Alps_Hybrid.pretty) +[keebs.pretty](https://github.com/egladman/keebs.pretty) +[keyboard_parts.pretty +](https://github.com/tmk/keyboard_parts.pretty) +[ProMicro KiCad](https://github.com/Biacco42/ProMicroKiCad) + +**Usefull Links:** +[Qmk Online Configurator](https://config.qmk.fm/#) +[Keyboard Layout Editor](http://www.keyboard-layout-editor.com/#/) +[Keyboard Plate & Case Builder](http://builder.swillkb.com/) + +--- diff --git a/keyboards/aplyard/aplx6/rev2/rev2.c b/keyboards/aplyard/aplx6/rev2/rev2.c new file mode 100644 index 00000000000..1a97f50058e --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/rev2.c @@ -0,0 +1,16 @@ + /* Copyright 2020 Aplyard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev2.h" diff --git a/keyboards/aplyard/aplx6/rev2/rev2.h b/keyboards/aplyard/aplx6/rev2/rev2.h new file mode 100644 index 00000000000..193c6cd51c3 --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/rev2.h @@ -0,0 +1,28 @@ + /* Copyright 2020 Aplyard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once +#include "quantum.h" + +#define LAYOUT( \ + k000, k001, k002, \ + k100, k101, k102 \ +) \ +{ \ + { k000, k001, k002 }, \ + { k100, k101, k102 } \ +} + + diff --git a/keyboards/aplyard/aplx6/rev2/rules.mk b/keyboards/aplyard/aplx6/rev2/rules.mk new file mode 100644 index 00000000000..5a66a6aa914 --- /dev/null +++ b/keyboards/aplyard/aplx6/rev2/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes # Unicode +OLED_DRIVER_ENABLE = yes # Enable Support for Oled Display +ENCODER_ENABLE = yes # Enable Support for Encoder From 6e8adeeaacd8cdc83422494e3d525caeded6fe9e Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Mon, 11 Jan 2021 02:04:42 -0500 Subject: [PATCH 057/145] Refine twinkle to be smoother (use breathing curve) (#11350) * Refine twinkle to be smoother (use breathing curve) * tune more for firmware size * fix bug when v=255 ~ drashna approved ~ --- docs/feature_rgblight.md | 2 +- quantum/rgblight.c | 83 ++++++++++++++++++++++++---------------- quantum/rgblight.h | 2 +- 3 files changed, 51 insertions(+), 36 deletions(-) diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 08d0e9531e5..f24a4f570c2 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -148,7 +148,7 @@ The following options are used to tweak the various animations: |`RGBLIGHT_EFFECT_KNIGHT_OFFSET` |`0` |The number of LEDs to start the "Knight" animation from the start of the strip by | |`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`255` |Range adjustment for the rainbow swirl effect to get different swirls | |`RGBLIGHT_EFFECT_SNAKE_LENGTH` |`4` |The number of LEDs to light up for the "Snake" animation | -|`RGBLIGHT_EFFECT_TWINKLE_LIFE` |`75` |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps) | +|`RGBLIGHT_EFFECT_TWINKLE_LIFE` |`200` |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps) | |`RGBLIGHT_EFFECT_TWINKLE_PROBABILITY`|`1/127` |Adjusts how likely each LED is to twinkle (on each animation step) | ### Example Usage to Reduce Memory Footprint diff --git a/quantum/rgblight.c b/quantum/rgblight.c index d277029e4b0..59b3f40264f 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -42,6 +42,9 @@ #ifndef MIN # define MIN(a, b) (((a) < (b)) ? (a) : (b)) #endif +#ifndef MAX +# define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#endif #ifdef RGBLIGHT_SPLIT /* for split keyboard */ @@ -933,7 +936,7 @@ void rgblight_task(void) { # endif # ifdef RGBLIGHT_EFFECT_TWINKLE else if (rgblight_status.base_mode == RGBLIGHT_MODE_TWINKLE) { - interval_time = get_interval_time(&RGBLED_TWINKLE_INTERVALS[delta % 3], 5, 50); + interval_time = get_interval_time(&RGBLED_TWINKLE_INTERVALS[delta % 3], 5, 30); effect_func = (effect_func_t)rgblight_effect_twinkle; } # endif @@ -975,8 +978,7 @@ void rgblight_task(void) { #endif /* RGBLIGHT_USE_TIMER */ -// Effects -#ifdef RGBLIGHT_EFFECT_BREATHING +#if defined(RGBLIGHT_EFFECT_BREATHING) || defined(RGBLIGHT_EFFECT_TWINKLE) # ifndef RGBLIGHT_EFFECT_BREATHE_CENTER # ifndef RGBLIGHT_BREATHE_TABLE_SIZE @@ -985,17 +987,24 @@ void rgblight_task(void) { # include # endif +static uint8_t breathe_calc(uint8_t pos) { + // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ +# ifdef RGBLIGHT_EFFECT_BREATHE_TABLE + return pgm_read_byte(&rgblight_effect_breathe_table[pos / table_scale]); +# else + return (exp(sin((pos / 255.0) * M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER / M_E) * (RGBLIGHT_EFFECT_BREATHE_MAX / (M_E - 1 / M_E)); +# endif +} + +#endif + +// Effects +#ifdef RGBLIGHT_EFFECT_BREATHING + __attribute__((weak)) const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; void rgblight_effect_breathing(animation_status_t *anim) { - float val; - - // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ -# ifdef RGBLIGHT_EFFECT_BREATHE_TABLE - val = pgm_read_byte(&rgblight_effect_breathe_table[anim->pos / table_scale]); -# else - val = (exp(sin((anim->pos / 255.0) * M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER / M_E) * (RGBLIGHT_EFFECT_BREATHE_MAX / (M_E - 1 / M_E)); -# endif + uint8_t val = breathe_calc(anim->pos); rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val); anim->pos = (anim->pos + 1); } @@ -1247,48 +1256,54 @@ void rgblight_effect_alternating(animation_status_t *anim) { #endif #ifdef RGBLIGHT_EFFECT_TWINKLE -__attribute__((weak)) const uint8_t RGBLED_TWINKLE_INTERVALS[] PROGMEM = {50, 25, 10}; +__attribute__((weak)) const uint8_t RGBLED_TWINKLE_INTERVALS[] PROGMEM = {30, 15, 5}; typedef struct PACKED { HSV hsv; uint8_t life; - bool up; + uint8_t max_life; } TwinkleState; static TwinkleState led_twinkle_state[RGBLED_NUM]; void rgblight_effect_twinkle(animation_status_t *anim) { - bool random_color = anim->delta / 3; - bool restart = anim->pos == 0; - anim->pos = 1; + const bool random_color = anim->delta / 3; + const bool restart = anim->pos == 0; + anim->pos = 1; + + const uint8_t bottom = breathe_calc(0); + const uint8_t top = breathe_calc(127); + + uint8_t frac(uint8_t n, uint8_t d) { return (uint16_t)255 * n / d; } + uint8_t scale(uint16_t v, uint8_t scale) { return (v * scale) >> 8; } for (uint8_t i = 0; i < rgblight_ranges.effect_num_leds; i++) { TwinkleState *t = &(led_twinkle_state[i]); HSV * c = &(t->hsv); + + if (!random_color) { + c->h = rgblight_config.hue; + c->s = rgblight_config.sat; + } + if (restart) { // Restart - t->life = 0; - t->hsv.v = 0; + t->life = 0; + c->v = 0; } else if (t->life) { // This LED is already on, either brightening or dimming t->life--; - uint8_t on = t->up ? RGBLIGHT_EFFECT_TWINKLE_LIFE - t->life : t->life; - c->v = (uint16_t)rgblight_config.val * on / RGBLIGHT_EFFECT_TWINKLE_LIFE; - if (t->life == 0 && t->up) { - t->up = false; - t->life = RGBLIGHT_EFFECT_TWINKLE_LIFE; - } - if (!random_color) { - c->h = rgblight_config.hue; - c->s = rgblight_config.sat; - } - } else if (rand() < RAND_MAX * RGBLIGHT_EFFECT_TWINKLE_PROBABILITY) { + uint8_t unscaled = frac(breathe_calc(frac(t->life, t->max_life)) - bottom, top - bottom); + c->v = scale(rgblight_config.val, unscaled); + } else if (rand() < scale((uint16_t)RAND_MAX * RGBLIGHT_EFFECT_TWINKLE_PROBABILITY, 127 + rgblight_config.val / 2)) { // This LED is off, but was randomly selected to start brightening - c->h = random_color ? rand() % 0xFF : rgblight_config.hue; - c->s = random_color ? (rand() % (rgblight_config.sat / 2)) + (rgblight_config.sat / 2) : rgblight_config.sat; - c->v = 0; - t->life = RGBLIGHT_EFFECT_TWINKLE_LIFE; - t->up = true; + if (random_color) { + c->h = rand() % 0xFF; + c->s = (rand() % (rgblight_config.sat / 2)) + (rgblight_config.sat / 2); + } + c->v = 0; + t->max_life = MAX(20, MIN(RGBLIGHT_EFFECT_TWINKLE_LIFE, rgblight_config.val)); + t->life = t->max_life; } else { // This LED is off, and was NOT selected to start brightening } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index c02fd4f37b6..3f0c22be34b 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -150,7 +150,7 @@ enum RGBLIGHT_EFFECT_MODE { # endif # ifndef RGBLIGHT_EFFECT_TWINKLE_LIFE -# define RGBLIGHT_EFFECT_TWINKLE_LIFE 75 +# define RGBLIGHT_EFFECT_TWINKLE_LIFE 200 # endif # ifndef RGBLIGHT_EFFECT_TWINKLE_PROBABILITY From 378edd9491f2ab0d3d8a970c9a8e64bc03ca15cf Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 11 Jan 2021 20:20:51 +1100 Subject: [PATCH 058/145] Fixup line endings. --- keyboards/misonoworks/karina/readme.md | 30 +++++++++++++------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/keyboards/misonoworks/karina/readme.md b/keyboards/misonoworks/karina/readme.md index b56a7f887fd..a6dcd844470 100644 --- a/keyboards/misonoworks/karina/readme.md +++ b/keyboards/misonoworks/karina/readme.md @@ -1,15 +1,15 @@ -# Karina - -![Karina](https://i.imgur.com/dawlYEl.jpg) - -35% keyboard with two rotary encoders and an LED bar. - -* Keyboard Maintainer: [MisonoWorks](https://github.com/autumnisacutie/) -* Hardware Supported: Karina V1 PCB -* Hardware Availability: [P3D Store](https://p3dstore.com/) - -Make example for this keyboard (after setting up your build environment): - - make misonoworks/karina:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +# Karina + +![Karina](https://i.imgur.com/dawlYEl.jpg) + +35% keyboard with two rotary encoders and an LED bar. + +* Keyboard Maintainer: [MisonoWorks](https://github.com/autumnisacutie/) +* Hardware Supported: Karina V1 PCB +* Hardware Availability: [P3D Store](https://p3dstore.com/) + +Make example for this keyboard (after setting up your build environment): + + make misonoworks/karina:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From 415d683ea71d516dd2a7d4f2f8e43eb4e3e993cb Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 11 Jan 2021 20:25:45 +1100 Subject: [PATCH 059/145] Remove unused `action_get_macro()` usages in user files (#11165) --- docs/feature_macros.md | 113 +----------------- docs/ja/feature_macros.md | 113 +----------------- .../1up60rgb/keymaps/raffle/keymap.c | 18 --- keyboards/alf/x2/keymaps/hhkb_60/keymap.c | 14 --- keyboards/alu84/keymaps/turbomech/keymap.c | 19 --- keyboards/atomic/keymaps/abienz.c | 10 -- keyboards/atomic/keymaps/michelle.c | 10 -- keyboards/atreus/keymaps/classic/keymap.c | 15 --- keyboards/atreus/keymaps/erlandsona/keymap.c | 14 --- keyboards/atreus/keymaps/gerb/keymap.c | 14 --- keyboards/atreus/keymaps/jeremy/keymap.c | 6 - keyboards/atreus/keymaps/kejadlen/keymap.c | 8 -- keyboards/atreus/keymaps/nojjan/keymap.c | 15 --- keyboards/atreus62/keymaps/atreus52/keymap.c | 15 --- keyboards/atreus62/keymaps/mfluid/keymap.c | 16 --- keyboards/atreus62/keymaps/pcewing/keymap.c | 16 --- .../bigseries/1key/keymaps/8ball/keymap.c | 4 - .../bigseries/1key/keymaps/leddance/keymap.c | 51 -------- .../v2/keymaps/profanum429/keymap.c | 4 - keyboards/dz60/keymaps/256k_HHKB/keymap.c | 9 -- keyboards/dz60/keymaps/LEdiodes/keymap.c | 19 --- keyboards/dz60/keymaps/itsaferbie/keymap.c | 9 -- keyboards/ergodone/keymaps/eozaki/keymap.c | 18 --- keyboards/ergodone/keymaps/kloki/keymap.c | 18 --- .../ergodox_ez/keymaps/blakedietz/keymap.c | 20 ---- keyboards/ergodox_ez/keymaps/kou/keymap.c | 18 --- .../ergodox_ez/keymaps/matrixman/keymap.c | 20 ---- keyboards/ergodox_ez/keymaps/pvinis/keymap.c | 7 -- keyboards/ergodox_ez/keymaps/skug/keymap.c | 18 --- .../ergodox_ez/keymaps/smurmann/keymap.c | 18 --- keyboards/ergodox_ez/keymaps/vim/keymap.c | 9 -- .../keymaps/dudeofawesome/keymap.c | 18 --- .../keymaps/halfkeyboard/keymap.c | 18 --- .../keymaps/input_club/keymap.c | 18 --- .../keymaps/nordic_ergo/keymap.c | 17 --- .../ergodox_infinity/keymaps/rask/keymap.c | 18 --- .../keymaps/trulyergonomic/keymap.c | 18 --- keyboards/gh60/revc/keymaps/dbroqua/keymap.c | 6 - .../gh60/revc/keymaps/dbroqua_7U/keymap.c | 6 - keyboards/gh60/revc/keymaps/sethbc/keymap.c | 19 --- keyboards/gh60/satan/keymaps/dbroqua/keymap.c | 6 - .../handwired/dactyl/keymaps/dvorak/keymap.c | 27 ----- .../handwired/ibm122m/keymaps/lukaus/keymap.c | 24 ---- .../hhkb/ansi/keymaps/blakedietz/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c | 5 - keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/eric/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/krusli/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/lxol/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/mjt/keymap.c | 19 --- keyboards/hhkb/ansi/keymaps/smt/keymap.c | 19 --- keyboards/hhkb/jp/keymaps/default/keymap.c | 5 - .../hhkb/jp/keymaps/default_mac/keymap.c | 5 - keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c | 5 - keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c | 5 - keyboards/hhkb/jp/keymaps/sh_jp/keymap.c | 5 - keyboards/hhkb/jp/keymaps/via/keymap.c | 5 - keyboards/hid_liber/keymaps/bakageta/keymap.c | 32 ----- .../infinity60/keymaps/jpetermans/keymap.c | 10 -- keyboards/jj40/keymaps/fun40/keymap.c | 25 ---- keyboards/kbdfans/kbd75/keymaps/adit/keymap.c | 19 --- keyboards/kc60/keymaps/dbroqua/keymap.c | 6 - keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c | 6 - keyboards/kc60/keymaps/sgoodwin/keymap.c | 6 - keyboards/kc60/keymaps/wigguno/keymap.c | 6 - keyboards/kinesis/keymaps/dvorak/keymap.c | 32 ----- .../lfk78/keymaps/ca178858/keymap.c | 17 --- .../lfk87/keymaps/ca178858/keymap.c | 22 ---- .../lfkeyboards/lfk87/keymaps/gbchk/keymap.c | 22 ---- .../mini1800/keymaps/ca178858/keymap.c | 22 ---- .../mechmini/v2/keymaps/625_space/keymap.c | 53 -------- .../mechmini/v2/keymaps/split_space/keymap.c | 53 -------- keyboards/meira/keymaps/cole/keymap.c | 24 ---- keyboards/meira/keymaps/grahampheath/keymap.c | 23 ---- keyboards/meira/keymaps/takmiya/keymap.c | 24 ---- keyboards/melody96/keymaps/crilith/keymap.c | 10 -- keyboards/mint60/keymaps/eucalyn/keymap.c | 28 ----- keyboards/miuni32/keymaps/adam-lee/keymap.c | 59 --------- keyboards/novelpad/keymaps/0xdec/keymap.c | 13 -- keyboards/planck/keymaps/bone2planck/keymap.c | 19 --- keyboards/planck/keymaps/dc/keymap.c | 9 -- keyboards/planck/keymaps/gabriel/keymap.c | 16 --- keyboards/planck/keymaps/johannes/keymap.c | 5 - keyboards/planck/keymaps/matrixman/keymap.c | 18 --- keyboards/planck/keymaps/neo2planck/keymap.c | 19 --- keyboards/planck/keymaps/vifon/keymap.c | 5 - .../katana60/rev1/keymaps/colemak/keymap.c | 32 ----- .../sentraq/s60_x/keymaps/dbroqua/keymap.c | 4 - keyboards/staryu/keymaps/krusli/keymap.c | 10 -- keyboards/v60_type_r/keymaps/vimouse/keymap.c | 16 --- keyboards/xd60/keymaps/Jos/keymap.c | 20 ---- keyboards/xd60/keymaps/birkir/keymap.c | 19 --- keyboards/xd60/keymaps/edulpn/keymap.c | 19 --- keyboards/xd60/keymaps/edulpn64/keymap.c | 19 --- keyboards/xd60/keymaps/kmontag42/keymap.c | 17 --- keyboards/xd60/keymaps/krusli/keymap.c | 19 --- keyboards/xd60/keymaps/rooski/keymap.c | 22 ---- .../xd60/keymaps/split_bksp_arrows/keymap.c | 19 --- keyboards/xd60/keymaps/stanleylai/keymap.c | 19 --- keyboards/xd60/keymaps/supercoffee/keymap.c | 19 --- keyboards/xd75/keymaps/boy_314/keymap.c | 19 --- .../xd75/keymaps/c4software_bepo/keymap.c | 18 --- .../xd75/keymaps/dyn_macro_tap_dance/keymap.c | 18 --- keyboards/xd75/keymaps/kim-kim-xd73/keymap.c | 18 --- keyboards/xd75/keymaps/kim-kim/keymap.c | 18 --- keyboards/xd75/keymaps/kloki/keymap.c | 18 --- layouts/community/60_iso/unxmaal/keymap.c | 15 --- layouts/community/ergodox/adam/keymap.c | 20 ---- layouts/community/ergodox/adnw_k_o_y/keymap.c | 20 ---- layouts/community/ergodox/andrew_osx/keymap.c | 20 ---- .../community/ergodox/coderkun_neo2/keymap.c | 19 --- layouts/community/ergodox/colemak/keymap.c | 20 ---- layouts/community/ergodox/dave/keymap.c | 20 ---- layouts/community/ergodox/dragon788/keymap.c | 20 ---- layouts/community/ergodox/dvorak/keymap.c | 20 ---- .../community/ergodox/dvorak_emacs/keymap.c | 20 ---- .../ergodox/dvorak_emacs_software/keymap.c | 20 ---- .../ergodox/dvorak_intl_squisher/keymap.c | 20 ---- .../community/ergodox/dvorak_plover/keymap.c | 20 ---- .../community/ergodox/emacs_osx_dk/keymap.c | 20 ---- .../community/ergodox/german-kinergo/keymap.c | 20 ---- .../community/ergodox/german-lukas/keymap.c | 20 ---- layouts/community/ergodox/german/keymap.c | 20 ---- layouts/community/ergodox/guni/keymap.c | 22 ---- layouts/community/ergodox/haegin/keymap.c | 20 ---- layouts/community/ergodox/j3rn/keymap.c | 20 ---- layouts/community/ergodox/jacobono/keymap.c | 20 ---- layouts/community/ergodox/jafo/keymap.c | 18 --- layouts/community/ergodox/jgarr/keymap.c | 20 ---- layouts/community/ergodox/kastyle/keymap.c | 20 ---- layouts/community/ergodox/kejadlen/keymap.c | 11 -- layouts/community/ergodox/kines-ish/keymap.c | 20 ---- layouts/community/ergodox/maz/keymap.c | 20 ---- .../community/ergodox/mclennon_osx/keymap.c | 20 ---- layouts/community/ergodox/msc/keymap.c | 20 ---- layouts/community/ergodox/naps62/keymap.c | 20 ---- .../ergodox/neo2_on_qwertz_hardware/keymap.c | 22 ---- .../ergodox/osx_de_adnw_koy/keymap.c | 28 ----- layouts/community/ergodox/osx_fr/keymap.c | 20 ---- .../ergodox/osx_kinesis_pnut/keymap.c | 20 ---- layouts/community/ergodox/phoenix/keymap.c | 20 ---- layouts/community/ergodox/plover/keymap.c | 20 ---- .../ergodox/robot_test_layout/keymap.c | 12 -- .../romanzolotarev-norman-osx/keymap.c | 8 -- .../keymap.c | 19 --- .../romanzolotarev-norman-plover-osx/keymap.c | 19 --- .../romanzolotarev-norman-qwerty-osx/keymap.c | 8 -- layouts/community/ergodox/siroken3/keymap.c | 20 ---- layouts/community/ergodox/sneako/keymap.c | 20 ---- .../community/ergodox/software_neo2/keymap.c | 20 ---- layouts/community/ergodox/supercoder/keymap.c | 13 -- layouts/community/ergodox/swedish/keymap.c | 18 --- layouts/community/ergodox/techtomas/keymap.c | 20 ---- .../community/ergodox/tkuichooseyou/keymap.c | 20 ---- .../community/ergodox/tonyabra_osx/keymap.c | 20 ---- .../twentylives_dvorak_with_hebrew/keymap.c | 12 -- layouts/community/ergodox/yoruian/keymap.c | 7 -- .../ergodox/zweihander-macos/keymap.c | 12 -- .../community/ortho_4x12/mindsound/keymap.c | 5 - 159 files changed, 12 insertions(+), 2943 deletions(-) diff --git a/docs/feature_macros.md b/docs/feature_macros.md index 36fa761d216..aa1ebc337a0 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -4,7 +4,7 @@ Macros allow you to send multiple keystrokes when pressing just one key. QMK has !> **Security Note**: While it is possible to use macros to send passwords, credit card numbers, and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold of your keyboard will be able to access that information by opening a text editor. -## The New Way: `SEND_STRING()` & `process_record_user` +## `SEND_STRING()` & `process_record_user` Sometimes you want a key to type out words or phrases. For the most common situations, we've provided `SEND_STRING()`, which will type out a string (i.e. a sequence of characters) for you. All ASCII characters that are easily translatable to a keycode are supported (e.g. `qmk 123\n\t`). @@ -262,15 +262,15 @@ This will clear all keys besides the mods currently pressed. This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows. ```c -bool is_alt_tab_active = false; # ADD this near the begining of keymap.c -uint16_t alt_tab_timer = 0; # we will be using them soon. +bool is_alt_tab_active = false; // ADD this near the begining of keymap.c +uint16_t alt_tab_timer = 0; // we will be using them soon. -enum custom_keycodes { # Make sure have the awesome keycode ready +enum custom_keycodes { // Make sure have the awesome keycode ready ALT_TAB = SAFE_RANGE, }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { # This will do most of the grunt work with the keycodes. + switch (keycode) { // This will do most of the grunt work with the keycodes. case ALT_TAB: if (record->event.pressed) { if (!is_alt_tab_active) { @@ -287,7 +287,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void matrix_scan_user(void) { # The very important timer. +void matrix_scan_user(void) { // The very important timer. if (is_alt_tab_active) { if (timer_elapsed(alt_tab_timer) > 1000) { unregister_code(KC_LALT); @@ -296,104 +296,3 @@ void matrix_scan_user(void) { # The very important timer. } } ``` - ---- - -## **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro` - -!> This is inherited from TMK, and hasn't been updated - it's recommended that you use `SEND_STRING` and `process_record_user` instead. - -By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example: - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END); - case 1: - return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; -``` - -This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement: - - if (!record->event.pressed) { - -### Macro Commands - -A macro can include the following commands: - -* I() change interval of stroke in milliseconds. -* D() press key. -* U() release key. -* T() type key(press and release). -* W() wait (milliseconds). -* END end mark. - -### Mapping a Macro to a Key - -Use the `M()` function within your keymap to call a macro. For example, here is the keymap for a 2-key keyboard: - -```c -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - M(0), M(1) - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END); - case 1: - return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; -``` - -When you press the key on the left it will type "Hi!" and when you press the key on the right it will type "Bye!". - -### Naming Your Macros - -If you have a bunch of macros you want to refer to from your keymap while keeping the keymap easily readable you can name them using `#define` at the top of your file. - -```c -#define M_HI M(0) -#define M_BYE M(1) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - M_HI, M_BYE - ), -}; -``` - - -## Advanced Example: - -### Single-Key Copy/Paste - -This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released. - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case 0: { - if (record->event.pressed) { - return MACRO( D(LCTL), T(C), U(LCTL), END ); - } else { - return MACRO( D(LCTL), T(V), U(LCTL), END ); - } - break; - } - } - return MACRO_NONE; -}; -``` diff --git a/docs/ja/feature_macros.md b/docs/ja/feature_macros.md index 14a58ad2442..c42a61b5fb8 100644 --- a/docs/ja/feature_macros.md +++ b/docs/ja/feature_macros.md @@ -9,7 +9,7 @@ !> **セキュリティの注意**: マクロを使って、パスワード、クレジットカード番号、その他の機密情報のいずれも送信することが可能ですが、それは非常に悪い考えです。あなたのキーボードを手に入れた人は誰でもテキストエディタを開いてその情報にアクセスすることができます。 -## 新しい方法: `SEND_STRING()` と `process_record_user` +## `SEND_STRING()` と `process_record_user` 単語またはフレーズを入力するキーが欲しい時があります。最も一般的な状況のために `SEND_STRING()` を提供しています。これは文字列(つまり、文字のシーケンス)を入力します。簡単にキーコードに変換することができる全ての ASCII 文字がサポートされています (例えば、`qmk 123\n\t`)。 @@ -267,15 +267,15 @@ SEND_STRING(".."SS_TAP(X_END)); このマクロは `KC_LALT` を登録し、`KC_TAB` をタップして、1000ms 待ちます。キーが再度タップされると、別の `KC_TAB` が送信されます; タップが無い場合、`KC_LALT` が登録解除され、ウィンドウを切り替えることができます。 ```c -bool is_alt_tab_active = false; # keymap.c の先頭付近にこれを追加します -uint16_t alt_tab_timer = 0; # すぐにそれらを使います +bool is_alt_tab_active = false; // keymap.c の先頭付近にこれを追加します +uint16_t alt_tab_timer = 0; // すぐにそれらを使います -enum custom_keycodes { # 素晴らしいキーコードを用意してください +enum custom_keycodes { // 素晴らしいキーコードを用意してください ALT_TAB = SAFE_RANGE, }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { # これはキーコードを利用したつまらない作業のほとんどを行います。 + switch (keycode) { // これはキーコードを利用したつまらない作業のほとんどを行います。 case ALT_TAB: if (record->event.pressed) { if (!is_alt_tab_active) { @@ -292,7 +292,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void matrix_scan_user(void) { # とても重要なタイマー +void matrix_scan_user(void) { // とても重要なタイマー if (is_alt_tab_active) { if (timer_elapsed(alt_tab_timer) > 1000) { unregister_code(KC_LALT); @@ -301,104 +301,3 @@ void matrix_scan_user(void) { # とても重要なタイマー } } ``` - ---- - -## **(非推奨)** 古い方法: `MACRO()` と `action_get_macro` - -!> これは TMK から継承されており、更新されていません - 代わりに `SEND_STRING` と `process_record_user` を使うことをお勧めします。 - -デフォルトでは、QMK はマクロが無いことを前提としています。マクロを定義するには、`action_get_macro()` 関数を作成します。例えば: - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END); - case 1: - return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; -``` - -これは割り当てられているキーが押された時に実行される2つのマクロを定義します。キーが放された時にそれらを実行したい場合は、if 文を変更することができます。 - - if (!record->event.pressed) { - -### マクロコマンド - -マクロは以下のコマンドを含めることができます: - -* I() はストロークの間隔をミリ秒単位で変更します。 -* D() はキーを押します。 -* U() はキーを放します。 -* T() はキーをタイプ(押して放す)します。 -* W() は待ちます (ミリ秒)。 -* END 終了マーク。 - -### マクロをキーにマッピングする - -マクロを呼び出すにはキーマップ内で `M()` 関数を使います。例えば、2キーのキーボードのキーマップは以下の通りです: - -```c -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - M(0), M(1) - ), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END); - case 1: - return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; -``` - -左側のキーを押すと、"Hi!" を入力し、右側のキーを押すと "Bye!" を入力します。 - -### マクロに名前を付ける - -キーマップを読みやすくしながらキーマップから参照したいマクロがたくさんある場合は、ファイルの先頭で `#define` を使って名前を付けることができます。 - -```c -#define M_HI M(0) -#define M_BYE M(1) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - M_HI, M_BYE - ), -}; -``` - - -## 高度な例: - -### 単一キーのコピーと貼り付け - -この例は、押された時に `Ctrl-C` を送信し、放される時に `Ctrl-V` を送信するマクロを定義します。 - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case 0: { - if (record->event.pressed) { - return MACRO( D(LCTL), T(C), U(LCTL), END ); - } else { - return MACRO( D(LCTL), T(V), U(LCTL), END ); - } - break; - } - } - return MACRO_NONE; -}; -``` diff --git a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c index f4dd36d6dc5..cba9a205c56 100644 --- a/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c +++ b/keyboards/1upkeyboards/1up60rgb/keymaps/raffle/keymap.c @@ -110,21 +110,3 @@ void led_set_user(uint8_t usb_led) { } } - -//*********** Empty fxns from default map that I'm not modifying ***********// -// onboard macro support -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - ; - - switch (id) { - - } - return MACRO_NONE; -} - -// initialize matrix -void matrix_init_user(void) { -} - - - diff --git a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c b/keyboards/alf/x2/keymaps/hhkb_60/keymap.c index 8baba1ae9d6..0abde6243ad 100644 --- a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c +++ b/keyboards/alf/x2/keymaps/hhkb_60/keymap.c @@ -19,20 +19,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - void led_set_user(uint8_t usb_led) { if (usb_led & (1 << USB_LED_CAPS_LOCK)) { DDRB |= (1 << 2); PORTB &= ~(1 << 2); diff --git a/keyboards/alu84/keymaps/turbomech/keymap.c b/keyboards/alu84/keymaps/turbomech/keymap.c index b204a68657c..80006d0dbe7 100644 --- a/keyboards/alu84/keymaps/turbomech/keymap.c +++ b/keyboards/alu84/keymaps/turbomech/keymap.c @@ -88,25 +88,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - //switch (id) { - // case _FLIP: - // if (record->event.pressed) - - //SEND_STRING("(╯°□°）╯︵ ┻━┻"); - // } - // return false; - // break; - // } - - return MACRO_NONE; -}; - - - -void matrix_scan_user(void) { -} - void led_set_user(uint8_t usb_led) { if (usb_led & (1 << USB_LED_NUM_LOCK)) { diff --git a/keyboards/atomic/keymaps/abienz.c b/keyboards/atomic/keymaps/abienz.c index 5bc00aa824a..7cc27d71a6d 100644 --- a/keyboards/atomic/keymaps/abienz.c +++ b/keyboards/atomic/keymaps/abienz.c @@ -16,13 +16,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, MO(1), KC_TRNS, KC_NO, KC_TRNS, MO(1), KC_TRNS, KC_NO, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT, ), }; - -const macro_t * action_get_macro(keyrecord_t * record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - return MACRODOWN(TYPE(KC_T), END); - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atomic/keymaps/michelle.c b/keyboards/atomic/keymaps/michelle.c index 61953bf6606..6dd2de2791e 100644 --- a/keyboards/atomic/keymaps/michelle.c +++ b/keyboards/atomic/keymaps/michelle.c @@ -167,13 +167,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // └────────────────────────────────────────────────────────┴──────────┴──────────┴──────────┴──────────┴───────────┘ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - return MACRODOWN(TYPE(KC_T), END); - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/classic/keymap.c b/keyboards/atreus/keymaps/classic/keymap.c index 3feeb97cfbc..5837bcfe74e 100644 --- a/keyboards/atreus/keymaps/classic/keymap.c +++ b/keyboards/atreus/keymaps/classic/keymap.c @@ -30,18 +30,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, DF(_QW), KC_TRNS, KC_TRNS, RESET ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/erlandsona/keymap.c b/keyboards/atreus/keymaps/erlandsona/keymap.c index e25f4f089d0..151288edc2b 100644 --- a/keyboards/atreus/keymaps/erlandsona/keymap.c +++ b/keyboards/atreus/keymaps/erlandsona/keymap.c @@ -41,17 +41,3 @@ const uint16_t PROGMEM fn_actions[] = { [BASE] = ACTION_LAYER_OFF(2, 1), // switch back to layer 0 [MOUS] = ACTION_LAYER_ON(2, 1) // switch to layer 2 }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/gerb/keymap.c b/keyboards/atreus/keymaps/gerb/keymap.c index f858aa49c45..f6ff7330db5 100644 --- a/keyboards/atreus/keymaps/gerb/keymap.c +++ b/keyboards/atreus/keymaps/gerb/keymap.c @@ -45,17 +45,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_RCTL, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, RESET ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c index e875af3ccac..de2bedaa7f3 100644 --- a/keyboards/atreus/keymaps/jeremy/keymap.c +++ b/keyboards/atreus/keymaps/jeremy/keymap.c @@ -54,9 +54,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) {} - - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/kejadlen/keymap.c b/keyboards/atreus/keymaps/kejadlen/keymap.c index 34a057c2408..3f6d01a5941 100644 --- a/keyboards/atreus/keymaps/kejadlen/keymap.c +++ b/keyboards/atreus/keymaps/kejadlen/keymap.c @@ -30,11 +30,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case TEENSY: - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus/keymaps/nojjan/keymap.c b/keyboards/atreus/keymaps/nojjan/keymap.c index a6872f99522..42204b13e0c 100644 --- a/keyboards/atreus/keymaps/nojjan/keymap.c +++ b/keyboards/atreus/keymaps/nojjan/keymap.c @@ -40,18 +40,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12 , KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/atreus62/keymaps/atreus52/keymap.c b/keyboards/atreus62/keymaps/atreus52/keymap.c index 31a01ccd879..2abd49b116d 100644 --- a/keyboards/atreus62/keymaps/atreus52/keymap.c +++ b/keyboards/atreus62/keymaps/atreus52/keymap.c @@ -63,21 +63,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - static uint8_t qw_dv_swap_state = 0; bool process_record_user (uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/atreus62/keymaps/mfluid/keymap.c b/keyboards/atreus62/keymaps/mfluid/keymap.c index 206a4655be5..3c25a4b8272 100644 --- a/keyboards/atreus62/keymaps/mfluid/keymap.c +++ b/keyboards/atreus62/keymaps/mfluid/keymap.c @@ -37,19 +37,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, OOOOOOO, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - diff --git a/keyboards/atreus62/keymaps/pcewing/keymap.c b/keyboards/atreus62/keymaps/pcewing/keymap.c index eee22271f48..709903c6cf2 100644 --- a/keyboards/atreus62/keymaps/pcewing/keymap.c +++ b/keyboards/atreus62/keymaps/pcewing/keymap.c @@ -74,19 +74,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), */ }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/bigseries/1key/keymaps/8ball/keymap.c b/keyboards/bigseries/1key/keymaps/8ball/keymap.c index 1097eb94afa..33a5428fe41 100755 --- a/keyboards/bigseries/1key/keymaps/8ball/keymap.c +++ b/keyboards/bigseries/1key/keymaps/8ball/keymap.c @@ -61,10 +61,6 @@ void reset_rgb(void); bool initialized = 0; uint32_t lastTime = 0; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - void matrix_init_user(void) { if (!initialized){ dprintf("Initializing in matrix_scan_user"); diff --git a/keyboards/bigseries/1key/keymaps/leddance/keymap.c b/keyboards/bigseries/1key/keymaps/leddance/keymap.c index 3cd8f1db7f1..c77e5790280 100755 --- a/keyboards/bigseries/1key/keymaps/leddance/keymap.c +++ b/keyboards/bigseries/1key/keymaps/leddance/keymap.c @@ -74,54 +74,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; - - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - // Nothing here, see dance_toggle - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/duck/eagle_viper/v2/keymaps/profanum429/keymap.c b/keyboards/duck/eagle_viper/v2/keymaps/profanum429/keymap.c index a0163ad6aad..6c6cfbd2f88 100644 --- a/keyboards/duck/eagle_viper/v2/keymaps/profanum429/keymap.c +++ b/keyboards/duck/eagle_viper/v2/keymaps/profanum429/keymap.c @@ -33,7 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______ \ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -}; diff --git a/keyboards/dz60/keymaps/256k_HHKB/keymap.c b/keyboards/dz60/keymaps/256k_HHKB/keymap.c index 1448e4ddce1..c670e06c6f7 100644 --- a/keyboards/dz60/keymaps/256k_HHKB/keymap.c +++ b/keyboards/dz60/keymaps/256k_HHKB/keymap.c @@ -238,12 +238,3 @@ KC_MS_ACCEL1 -> KC_ACL1 -> Set mouse acceleration to 1 KC_MS_ACCEL2 -> KC_ACL2 -> Set mouse acceleration to 2 */ - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} diff --git a/keyboards/dz60/keymaps/LEdiodes/keymap.c b/keyboards/dz60/keymaps/LEdiodes/keymap.c index 3ac0047a319..9fb859dfe13 100644 --- a/keyboards/dz60/keymaps/LEdiodes/keymap.c +++ b/keyboards/dz60/keymaps/LEdiodes/keymap.c @@ -100,25 +100,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; - //Tap Dance Definitions qk_tap_dance_action_t tap_dance_actions[] = { diff --git a/keyboards/dz60/keymaps/itsaferbie/keymap.c b/keyboards/dz60/keymaps/itsaferbie/keymap.c index de30e053823..51345a2bcdc 100644 --- a/keyboards/dz60/keymaps/itsaferbie/keymap.c +++ b/keyboards/dz60/keymaps/itsaferbie/keymap.c @@ -31,12 +31,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ______, ______, ______, ______, ______), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} diff --git a/keyboards/ergodone/keymaps/eozaki/keymap.c b/keyboards/ergodone/keymaps/eozaki/keymap.c index 917790124f7..09854ee89c7 100644 --- a/keyboards/ergodone/keymaps/eozaki/keymap.c +++ b/keyboards/ergodone/keymaps/eozaki/keymap.c @@ -143,24 +143,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodone/keymaps/kloki/keymap.c b/keyboards/ergodone/keymaps/kloki/keymap.c index 3303b7b4083..87e96d20fdc 100644 --- a/keyboards/ergodone/keymaps/kloki/keymap.c +++ b/keyboards/ergodone/keymaps/kloki/keymap.c @@ -162,24 +162,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c b/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c index 28f45bc3c21..5c08d307277 100644 --- a/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c +++ b/keyboards/ergodox_ez/keymaps/blakedietz/keymap.c @@ -198,26 +198,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -// MACRODOWN only works in this function -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/keyboards/ergodox_ez/keymaps/kou/keymap.c b/keyboards/ergodox_ez/keymaps/kou/keymap.c index 5e49dca2521..c8d0a6b5ddb 100644 --- a/keyboards/ergodox_ez/keymaps/kou/keymap.c +++ b/keyboards/ergodox_ez/keymaps/kou/keymap.c @@ -248,24 +248,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_ez/keymaps/matrixman/keymap.c b/keyboards/ergodox_ez/keymaps/matrixman/keymap.c index f5d0a0cf799..10b6567cdb6 100644 --- a/keyboards/ergodox_ez/keymaps/matrixman/keymap.c +++ b/keyboards/ergodox_ez/keymaps/matrixman/keymap.c @@ -162,26 +162,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/keyboards/ergodox_ez/keymaps/pvinis/keymap.c b/keyboards/ergodox_ez/keymaps/pvinis/keymap.c index c4b1b3b82c4..024cefd270e 100644 --- a/keyboards/ergodox_ez/keymaps/pvinis/keymap.c +++ b/keyboards/ergodox_ez/keymaps/pvinis/keymap.c @@ -265,13 +265,6 @@ uint32_t layer_state_set_user_keymap(uint32_t state) { return state; } -// extra keys -// const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { -// switch (id) { -// } -// return MACRO_NONE; -// } - // tap dances // flash keyboard on 4x tap, with leds diff --git a/keyboards/ergodox_ez/keymaps/skug/keymap.c b/keyboards/ergodox_ez/keymaps/skug/keymap.c index a9be5d55c49..bebb8c6a6f8 100644 --- a/keyboards/ergodox_ez/keymaps/skug/keymap.c +++ b/keyboards/ergodox_ez/keymaps/skug/keymap.c @@ -195,24 +195,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_ez/keymaps/smurmann/keymap.c b/keyboards/ergodox_ez/keymaps/smurmann/keymap.c index 9194c041c28..42ac13775f5 100644 --- a/keyboards/ergodox_ez/keymaps/smurmann/keymap.c +++ b/keyboards/ergodox_ez/keymaps/smurmann/keymap.c @@ -103,24 +103,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_ez/keymaps/vim/keymap.c b/keyboards/ergodox_ez/keymaps/vim/keymap.c index 2823a7b4eaf..948f2b4794f 100644 --- a/keyboards/ergodox_ez/keymaps/vim/keymap.c +++ b/keyboards/ergodox_ez/keymaps/vim/keymap.c @@ -153,15 +153,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case 0: - if (record->event.pressed) { SEND_STRING (VERSION_STRING); } - break; - } -return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { bool SHIFTED = (keyboard_report->mods & MOD_BIT(KC_LSFT)) | (keyboard_report->mods & MOD_BIT(KC_RSFT)); diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c b/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c index 26de392f9a7..c3ea48654da 100644 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c @@ -470,24 +470,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - void matrix_init_user() { backlight_enable(); backlight_level(BACKLIGHT_LEVELS); diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c b/keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c index 7f829b243e4..3870dd8ffd5 100644 --- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c @@ -456,24 +456,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_infinity/keymaps/input_club/keymap.c b/keyboards/ergodox_infinity/keymaps/input_club/keymap.c index 2aa74c4195b..545429fca03 100644 --- a/keyboards/ergodox_infinity/keymaps/input_club/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/input_club/keymap.c @@ -187,24 +187,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c b/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c index be96f0db086..d08b96cc6ec 100644 --- a/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/nordic_ergo/keymap.c @@ -194,23 +194,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case VRSN: diff --git a/keyboards/ergodox_infinity/keymaps/rask/keymap.c b/keyboards/ergodox_infinity/keymaps/rask/keymap.c index 990081f2f01..e31c1c5d6b5 100644 --- a/keyboards/ergodox_infinity/keymaps/rask/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/rask/keymap.c @@ -143,24 +143,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c b/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c index b288bd55772..02f409ad9e2 100644 --- a/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/trulyergonomic/keymap.c @@ -101,24 +101,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/keyboards/gh60/revc/keymaps/dbroqua/keymap.c b/keyboards/gh60/revc/keymaps/dbroqua/keymap.c index 2030355a762..9666199f3cf 100644 --- a/keyboards/gh60/revc/keymaps/dbroqua/keymap.c +++ b/keyboards/gh60/revc/keymaps/dbroqua/keymap.c @@ -100,12 +100,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; - enum function_id { RGBLED_TOGGLE, RGBLED_STEP_MODE, diff --git a/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c index 74ff97a931e..5b58d7686a1 100644 --- a/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c +++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/keymap.c @@ -52,12 +52,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; - enum function_id { LED_TOGGLE }; diff --git a/keyboards/gh60/revc/keymaps/sethbc/keymap.c b/keyboards/gh60/revc/keymaps/sethbc/keymap.c index f2802827a19..09a8d49eeb9 100644 --- a/keyboards/gh60/revc/keymaps/sethbc/keymap.c +++ b/keyboards/gh60/revc/keymaps/sethbc/keymap.c @@ -28,25 +28,6 @@ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(SHIFT_ESC), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_scan_user(void) { - -} - void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { static uint8_t shift_esc_shift_mask; switch (id) { diff --git a/keyboards/gh60/satan/keymaps/dbroqua/keymap.c b/keyboards/gh60/satan/keymaps/dbroqua/keymap.c index d1dc4c3c385..a9a54bf7640 100644 --- a/keyboards/gh60/satan/keymaps/dbroqua/keymap.c +++ b/keyboards/gh60/satan/keymaps/dbroqua/keymap.c @@ -77,12 +77,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; - enum function_id { RGBLED_TOGGLE, RGBLED_STEP_MODE, diff --git a/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c b/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c index cc6fc52e5aa..40ef3b019cc 100644 --- a/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c +++ b/keyboards/handwired/dactyl/keymaps/dvorak/keymap.c @@ -137,24 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case VRSN: @@ -166,12 +148,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) {}; diff --git a/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c b/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c index 130465e8d88..9f37798ed1e 100644 --- a/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c +++ b/keyboards/handwired/ibm122m/keymaps/lukaus/keymap.c @@ -137,30 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ),*/ }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool left_shift_down = false; bool right_shift_down = false; diff --git a/keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c b/keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c index a9146a4a08e..1d84f383c79 100644 --- a/keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/blakedietz/keymap.c @@ -104,22 +104,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_MUTE, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, TG(DEV), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c b/keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c index c27e37d8a0a..55d482e062a 100644 --- a/keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/cinaeco/keymap.c @@ -162,11 +162,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - // For Dynamic Macros. bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c b/keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c index e230a87fb27..04ff8048616 100644 --- a/keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/dbroqua/keymap.c @@ -68,22 +68,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, DF(_DEFAULT), DF(_ALTERNATE), KC_TRNS, KC_MSTP, KC_TRNS)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/hhkb/ansi/keymaps/eric/keymap.c b/keyboards/hhkb/ansi/keymaps/eric/keymap.c index bf788b2ffda..2cfc9785bbf 100644 --- a/keyboards/hhkb/ansi/keymaps/eric/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/eric/keymap.c @@ -52,22 +52,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_ASTR, KC_TRNS, KC_TRNS, KC_PGUP, KC_HOME, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LPRN, KC_RPRN, KC_PIPE, KC_TRNS, KC_TRNS, KC_PGDN, KC_END, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/hhkb/ansi/keymaps/krusli/keymap.c b/keyboards/hhkb/ansi/keymaps/krusli/keymap.c index af6102f1084..c63ef6a579d 100644 --- a/keyboards/hhkb/ansi/keymaps/krusli/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/krusli/keymap.c @@ -54,22 +54,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/hhkb/ansi/keymaps/lxol/keymap.c b/keyboards/hhkb/ansi/keymaps/lxol/keymap.c index 462a980471f..7496c542eb8 100644 --- a/keyboards/hhkb/ansi/keymaps/lxol/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/lxol/keymap.c @@ -179,22 +179,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, LT(LGUILEV, KC_A), LT(LALTLEV, KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, LT(RALTLEV, KC_L), LT(RGUILEV, KC_SCLN), KC_QUOT, MT(MOD_RCTL, KC_ENT), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB), KC_RGUI, KC_RALT, KC_SPC, KC_RALT, KC_RGUI)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/hhkb/ansi/keymaps/mjt/keymap.c b/keyboards/hhkb/ansi/keymaps/mjt/keymap.c index b62676edd98..1ed2cb15554 100644 --- a/keyboards/hhkb/ansi/keymaps/mjt/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/mjt/keymap.c @@ -81,25 +81,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, DYN_REC_STOP, KC_TRNS, KC_TRNS)}; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { uint16_t macro_kc = (keycode == MO(DYN) ? DYN_REC_STOP : keycode); diff --git a/keyboards/hhkb/ansi/keymaps/smt/keymap.c b/keyboards/hhkb/ansi/keymaps/smt/keymap.c index e1d8bae2e49..317a8faf5c8 100644 --- a/keyboards/hhkb/ansi/keymaps/smt/keymap.c +++ b/keyboards/hhkb/ansi/keymaps/smt/keymap.c @@ -117,25 +117,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, QWERTY, COLEMAK, DVORAK, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______)}; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) - { - case 0: - if (record->event.pressed) - { - register_code(KC_RSFT); - } - else - { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - void persistent_default_layer_set(uint16_t default_layer) { eeconfig_update_default_layer(default_layer); diff --git a/keyboards/hhkb/jp/keymaps/default/keymap.c b/keyboards/hhkb/jp/keymaps/default/keymap.c index 6fd06638cec..1c7d677ccf1 100644 --- a/keyboards/hhkb/jp/keymaps/default/keymap.c +++ b/keyboards/hhkb/jp/keymaps/default/keymap.c @@ -42,8 +42,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/hhkb/jp/keymaps/default_mac/keymap.c b/keyboards/hhkb/jp/keymaps/default_mac/keymap.c index f3ef3d6af6d..17127690f43 100644 --- a/keyboards/hhkb/jp/keymaps/default_mac/keymap.c +++ b/keyboards/hhkb/jp/keymaps/default_mac/keymap.c @@ -42,8 +42,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, _______)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c b/keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c index 15dc29773bf..4ebdcf86daf 100644 --- a/keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c +++ b/keyboards/hhkb/jp/keymaps/enoch_jp/keymap.c @@ -43,11 +43,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)}; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - /*void matrix_scan_user(void) { LEADER_DICTIONARY() { leading = false; diff --git a/keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c b/keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c index f40df74e876..c893495efee 100644 --- a/keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c +++ b/keyboards/hhkb/jp/keymaps/rdg_jp/keymap.c @@ -48,8 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/hhkb/jp/keymaps/sh_jp/keymap.c b/keyboards/hhkb/jp/keymaps/sh_jp/keymap.c index 79515c5a6ef..097a0175251 100644 --- a/keyboards/hhkb/jp/keymaps/sh_jp/keymap.c +++ b/keyboards/hhkb/jp/keymaps/sh_jp/keymap.c @@ -43,8 +43,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______)}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/hhkb/jp/keymaps/via/keymap.c b/keyboards/hhkb/jp/keymaps/via/keymap.c index cb1ba76fb0e..64323309bbb 100644 --- a/keyboards/hhkb/jp/keymaps/via/keymap.c +++ b/keyboards/hhkb/jp/keymaps/via/keymap.c @@ -51,8 +51,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/hid_liber/keymaps/bakageta/keymap.c b/keyboards/hid_liber/keymaps/bakageta/keymap.c index dab702e1072..5fa3cf6c0a8 100755 --- a/keyboards/hid_liber/keymaps/bakageta/keymap.c +++ b/keyboards/hid_liber/keymaps/bakageta/keymap.c @@ -54,35 +54,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______, _______, _______, _______ \ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/infinity60/keymaps/jpetermans/keymap.c b/keyboards/infinity60/keymaps/jpetermans/keymap.c index a169d658f70..c34d56ec85d 100644 --- a/keyboards/infinity60/keymaps/jpetermans/keymap.c +++ b/keyboards/infinity60/keymaps/jpetermans/keymap.c @@ -228,16 +228,6 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - - -bool process_record_user (uint16_t keycode, keyrecord_t *record) { - return true; -} - // Runs just one time when the keyboard initializes. void matrix_init_user(void) { diff --git a/keyboards/jj40/keymaps/fun40/keymap.c b/keyboards/jj40/keymaps/fun40/keymap.c index bbe6279e3e9..c15ba47ebb1 100644 --- a/keyboards/jj40/keymaps/fun40/keymap.c +++ b/keyboards/jj40/keymaps/fun40/keymap.c @@ -96,28 +96,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ }; - -// Macro actions for each corresponding ID. -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); -#ifdef BACKLIGHT_ENABLE - backlight_step(); -#endif - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c b/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c index b7cae4810b5..77851578806 100644 --- a/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c +++ b/keyboards/kbdfans/kbd75/keymaps/adit/keymap.c @@ -24,25 +24,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - enum function_id { SHIFT_ESC, }; diff --git a/keyboards/kc60/keymaps/dbroqua/keymap.c b/keyboards/kc60/keymaps/dbroqua/keymap.c index f7aa36dabb6..9cb9bbd8bd3 100644 --- a/keyboards/kc60/keymaps/dbroqua/keymap.c +++ b/keyboards/kc60/keymaps/dbroqua/keymap.c @@ -80,9 +80,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ______, ______, ______, ______, ______, ______, KC_HOME,KC_PGDN,KC_END \ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; diff --git a/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c index fe5a9c4a875..35ea6386ed8 100644 --- a/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c +++ b/keyboards/kc60/keymaps/dbroqua_hhkb/keymap.c @@ -50,9 +50,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ______, ______, ______, ______, KC_DEL, KC_MSTP, ______, ______, ______ \ ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c index c78e3108f79..79b0b8af4e7 100644 --- a/keyboards/kc60/keymaps/sgoodwin/keymap.c +++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c @@ -28,9 +28,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_NO, DEBUG, RESET, KC_TRNS, KC_NO \ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c index aa730c22f9d..00cf194336a 100644 --- a/keyboards/kc60/keymaps/wigguno/keymap.c +++ b/keyboards/kc60/keymaps/wigguno/keymap.c @@ -50,9 +50,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { RESET, KC_TRNS, KC_TRNS, BL_TOGG, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - return MACRO_NONE; -}; diff --git a/keyboards/kinesis/keymaps/dvorak/keymap.c b/keyboards/kinesis/keymaps/dvorak/keymap.c index 868c9ad558b..ff67eb9fc72 100644 --- a/keyboards/kinesis/keymaps/dvorak/keymap.c +++ b/keyboards/kinesis/keymaps/dvorak/keymap.c @@ -54,35 +54,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_ENT, KC_NO ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c index 5461f718c80..4e5e8472208 100644 --- a/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/lfk78/keymaps/ca178858/keymap.c @@ -159,19 +159,6 @@ const uint16_t PROGMEM fn_actions[] = { ACTION_FUNCTION(LFK_DEBUG_SETTINGS), // FN12 - prints LED and click settings to HID }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { - -} - void matrix_scan_user(void) { if(spam_space && !(get_mods() & (MOD_BIT(KC_LGUI)))){ register_code(KC_SPC); @@ -188,7 +175,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c index 59ee51c25ed..7f5ae4a721b 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/ca178858/keymap.c @@ -192,24 +192,6 @@ const uint16_t PROGMEM fn_actions[] = { ACTION_FUNCTION(LFK_PLAY_ONEUP), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { if((layer_state & (1 << CS_GO)) && (keycode == 44)){ if(get_mods() & (MOD_BIT(KC_LGUI))){ @@ -218,7 +200,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c index 89c5d8f8dbf..5c9dfb522a2 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c +++ b/keyboards/lfkeyboards/lfk87/keymaps/gbchk/keymap.c @@ -100,16 +100,6 @@ const uint16_t PROGMEM fn_actions[] = { ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - } - return MACRO_NONE; -}; - - void matrix_init_user(void) { // This keymap only has a single base layer, so reset the default if needed if(eeconfig_read_default_layer() > 1){ @@ -117,15 +107,3 @@ void matrix_init_user(void) { default_layer_set(1); } } - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c b/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c index eadc6eb5960..479862fe7c4 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c +++ b/keyboards/lfkeyboards/mini1800/keymaps/ca178858/keymap.c @@ -120,16 +120,6 @@ const uint16_t PROGMEM fn_actions[] = { ACTION_FUNCTION(LFK_CLICK_TOGGLE), // FN5 - Toggle audio click }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - } - return MACRO_NONE; -}; - - void matrix_init_user(void) { // This keymap only has a single base layer, so reset the default if needed if(eeconfig_read_default_layer() > 1){ @@ -137,15 +127,3 @@ void matrix_init_user(void) { default_layer_set(1); } } - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/mechmini/v2/keymaps/625_space/keymap.c b/keyboards/mechmini/v2/keymaps/625_space/keymap.c index 60d4d32d12b..0746b8aec92 100755 --- a/keyboards/mechmini/v2/keymaps/625_space/keymap.c +++ b/keyboards/mechmini/v2/keymaps/625_space/keymap.c @@ -28,59 +28,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - enum function_id { SHIFT_ESC, }; diff --git a/keyboards/mechmini/v2/keymaps/split_space/keymap.c b/keyboards/mechmini/v2/keymaps/split_space/keymap.c index e35f25ee401..e332c641a6c 100755 --- a/keyboards/mechmini/v2/keymaps/split_space/keymap.c +++ b/keyboards/mechmini/v2/keymaps/split_space/keymap.c @@ -27,59 +27,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - - switch (id) { - - } - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} - enum function_id { SHIFT_ESC, }; diff --git a/keyboards/meira/keymaps/cole/keymap.c b/keyboards/meira/keymaps/cole/keymap.c index 71c8d9711dc..14581aa5729 100644 --- a/keyboards/meira/keymaps/cole/keymap.c +++ b/keyboards/meira/keymaps/cole/keymap.c @@ -130,30 +130,6 @@ void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { } } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case LOWER: diff --git a/keyboards/meira/keymaps/grahampheath/keymap.c b/keyboards/meira/keymaps/grahampheath/keymap.c index ace172a2a40..ca47b891367 100644 --- a/keyboards/meira/keymaps/grahampheath/keymap.c +++ b/keyboards/meira/keymaps/grahampheath/keymap.c @@ -204,21 +204,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - #ifdef AUDIO_ENABLE float tone_qwerty[][2] = SONG(QWERTY_SOUND); @@ -230,14 +215,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); #endif -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: diff --git a/keyboards/meira/keymaps/takmiya/keymap.c b/keyboards/meira/keymaps/takmiya/keymap.c index bf693d8ad22..171b4f43ae1 100644 --- a/keyboards/meira/keymaps/takmiya/keymap.c +++ b/keyboards/meira/keymaps/takmiya/keymap.c @@ -124,30 +124,6 @@ void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { } } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: diff --git a/keyboards/melody96/keymaps/crilith/keymap.c b/keyboards/melody96/keymaps/crilith/keymap.c index 4c5e27668cc..40ae6914353 100644 --- a/keyboards/melody96/keymaps/crilith/keymap.c +++ b/keyboards/melody96/keymaps/crilith/keymap.c @@ -30,16 +30,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (!process_record_dynamic_macro(keycode, record)) { return false; diff --git a/keyboards/mint60/keymaps/eucalyn/keymap.c b/keyboards/mint60/keymaps/eucalyn/keymap.c index 93979a13124..b7e65809181 100644 --- a/keyboards/mint60/keymaps/eucalyn/keymap.c +++ b/keyboards/mint60/keymaps/eucalyn/keymap.c @@ -52,22 +52,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool TOG_STATUS = false; int RGB_current_mode; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case RGBRST: @@ -82,15 +66,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/miuni32/keymaps/adam-lee/keymap.c b/keyboards/miuni32/keymaps/adam-lee/keymap.c index 754c20f7d33..87519de5463 100644 --- a/keyboards/miuni32/keymaps/adam-lee/keymap.c +++ b/keyboards/miuni32/keymaps/adam-lee/keymap.c @@ -58,62 +58,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -} - -void matrix_scan_user(void) { -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - - if (usb_led & (1 << USB_LED_NUM_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_COMPOSE)) { - - } else { - - } - - if (usb_led & (1 << USB_LED_KANA)) { - - } else { - - } - -} diff --git a/keyboards/novelpad/keymaps/0xdec/keymap.c b/keyboards/novelpad/keymaps/0xdec/keymap.c index 429e6c5b3f8..bb8c977c92d 100755 --- a/keyboards/novelpad/keymaps/0xdec/keymap.c +++ b/keyboards/novelpad/keymaps/0xdec/keymap.c @@ -36,19 +36,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - -void matrix_init_user(void) {} - -void matrix_scan_user(void) {} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) {} - return true; -} - void led_set_user(uint8_t usb_led) { if (usb_led & (1 << USB_LED_NUM_LOCK)) { // Illuminate the LED under the Num Lock key diff --git a/keyboards/planck/keymaps/bone2planck/keymap.c b/keyboards/planck/keymaps/bone2planck/keymap.c index 81ba356d3da..18b71bfc47e 100644 --- a/keyboards/planck/keymaps/bone2planck/keymap.c +++ b/keyboards/planck/keymaps/bone2planck/keymap.c @@ -133,22 +133,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, XXXXXXX, _______, _______, _______, _______, XXXXXXX, _______, _______, _______ ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); -#ifdef BACKLIGHT_ENABLE - backlight_step(); -#endif - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/planck/keymaps/dc/keymap.c b/keyboards/planck/keymaps/dc/keymap.c index cab66434cfa..fdafd03a531 100644 --- a/keyboards/planck/keymaps/dc/keymap.c +++ b/keyboards/planck/keymaps/dc/keymap.c @@ -26,15 +26,6 @@ enum tap_dance_codes { CT_DEL_ESC }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - //keyevent_t event = record->event; - - switch (id) { - - } - return MACRO_NONE; -} - qk_tap_dance_action_t tap_dance_actions[] = { [0] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_LPRN), [1] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_LCBR), diff --git a/keyboards/planck/keymaps/gabriel/keymap.c b/keyboards/planck/keymaps/gabriel/keymap.c index d0f792c3128..9e56724c1bd 100644 --- a/keyboards/planck/keymaps/gabriel/keymap.c +++ b/keyboards/planck/keymaps/gabriel/keymap.c @@ -86,19 +86,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - backlight_step(); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/planck/keymaps/johannes/keymap.c b/keyboards/planck/keymaps/johannes/keymap.c index 274a3b57fb2..294bfd85ae8 100644 --- a/keyboards/planck/keymaps/johannes/keymap.c +++ b/keyboards/planck/keymaps/johannes/keymap.c @@ -85,8 +85,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; diff --git a/keyboards/planck/keymaps/matrixman/keymap.c b/keyboards/planck/keymaps/matrixman/keymap.c index 7525e345bb6..f13198cfa0c 100644 --- a/keyboards/planck/keymaps/matrixman/keymap.c +++ b/keyboards/planck/keymaps/matrixman/keymap.c @@ -52,21 +52,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/planck/keymaps/neo2planck/keymap.c b/keyboards/planck/keymaps/neo2planck/keymap.c index 6579ad9bc7a..d09103c1e5c 100644 --- a/keyboards/planck/keymaps/neo2planck/keymap.c +++ b/keyboards/planck/keymaps/neo2planck/keymap.c @@ -88,22 +88,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch (id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); -#ifdef BACKLIGHT_ENABLE - backlight_step(); -#endif - } - else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/planck/keymaps/vifon/keymap.c b/keyboards/planck/keymaps/vifon/keymap.c index 6398accc215..9f4ee9d2136 100644 --- a/keyboards/planck/keymaps/vifon/keymap.c +++ b/keyboards/planck/keymaps/vifon/keymap.c @@ -207,8 +207,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -} diff --git a/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c b/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c index 91128bd5c43..bb1752ba1b0 100644 --- a/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c +++ b/keyboards/rominronin/katana60/rev1/keymaps/colemak/keymap.c @@ -63,35 +63,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/sentraq/s60_x/keymaps/dbroqua/keymap.c b/keyboards/sentraq/s60_x/keymaps/dbroqua/keymap.c index 71cf93f0048..944ba7555f5 100644 --- a/keyboards/sentraq/s60_x/keymaps/dbroqua/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/dbroqua/keymap.c @@ -73,10 +73,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -} - enum function_id { RGBLED_TOGGLE, RGBLED_STEP_MODE, diff --git a/keyboards/staryu/keymaps/krusli/keymap.c b/keyboards/staryu/keymaps/krusli/keymap.c index cdfa9fe8fed..9cd1cf829f9 100644 --- a/keyboards/staryu/keymaps/krusli/keymap.c +++ b/keyboards/staryu/keymaps/krusli/keymap.c @@ -77,18 +77,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE ; -} - void matrix_init_user(void) { for (int i=0; i<5; i++) { backlight_led_on(i); } } - -void matrix_scan_user(void) { -} - -void led_set_user(uint8_t usb_led) { -} diff --git a/keyboards/v60_type_r/keymaps/vimouse/keymap.c b/keyboards/v60_type_r/keymaps/vimouse/keymap.c index 8b0019e7ba1..74e4b1309c3 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/keymap.c +++ b/keyboards/v60_type_r/keymaps/vimouse/keymap.c @@ -97,22 +97,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _____, _____, _____, _____, _____, _____, _____, _____), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - void led_set_user(uint8_t usb_led) { if (usb_led & (1<event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - - -// Loop -void matrix_scan_user(void) { - // Empty -}; - // LGUI acts as F(1) if held or as a tapped LGUI if tapped. Adapted from https://goo.gl/WnqGNS // Commented lines are for the "sticky" layer on two presses. Left it here for reference. static const int GUILAY = 2; // GUI Layer is layer #2 diff --git a/keyboards/xd60/keymaps/birkir/keymap.c b/keyboards/xd60/keymaps/birkir/keymap.c index 52f7086f210..56044505489 100644 --- a/keyboards/xd60/keymaps/birkir/keymap.c +++ b/keyboards/xd60/keymaps/birkir/keymap.c @@ -31,25 +31,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // empty -}; - bool edit = false; uint32_t mode; uint16_t hue; diff --git a/keyboards/xd60/keymaps/edulpn/keymap.c b/keyboards/xd60/keymaps/edulpn/keymap.c index 88032a384bf..e064dfb68d7 100644 --- a/keyboards/xd60/keymaps/edulpn/keymap.c +++ b/keyboards/xd60/keymaps/edulpn/keymap.c @@ -20,22 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_NO, KC_RGUI, KC_RCTL), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/edulpn64/keymap.c b/keyboards/xd60/keymaps/edulpn64/keymap.c index d1ad6f1b645..189fcde1760 100644 --- a/keyboards/xd60/keymaps/edulpn64/keymap.c +++ b/keyboards/xd60/keymaps/edulpn64/keymap.c @@ -20,22 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/kmontag42/keymap.c b/keyboards/xd60/keymaps/kmontag42/keymap.c index e23aef589e6..8e081c6731b 100644 --- a/keyboards/xd60/keymaps/kmontag42/keymap.c +++ b/keyboards/xd60/keymaps/kmontag42/keymap.c @@ -22,23 +22,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - rgblight_step(); - } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - // Loop void matrix_scan_user(void) { static uint8_t old_layer = 255; diff --git a/keyboards/xd60/keymaps/krusli/keymap.c b/keyboards/xd60/keymaps/krusli/keymap.c index 6b4dfdc33f7..697d6d7f1f5 100644 --- a/keyboards/xd60/keymaps/krusli/keymap.c +++ b/keyboards/xd60/keymaps/krusli/keymap.c @@ -20,22 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_NO, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/rooski/keymap.c b/keyboards/xd60/keymaps/rooski/keymap.c index 624c118bf38..71d5451dc44 100644 --- a/keyboards/xd60/keymaps/rooski/keymap.c +++ b/keyboards/xd60/keymaps/rooski/keymap.c @@ -55,25 +55,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TO(_BL), XXXXXXX, RGB_TOG, RGB_VAD, RGB_MOD), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - backlight_step(); - } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c b/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c index 005355cd20f..9958cbfc4ce 100644 --- a/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c +++ b/keyboards/xd60/keymaps/split_bksp_arrows/keymap.c @@ -32,22 +32,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDOWN, KC_END), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/stanleylai/keymap.c b/keyboards/xd60/keymaps/stanleylai/keymap.c index 9d7327ee69d..a827744c148 100644 --- a/keyboards/xd60/keymaps/stanleylai/keymap.c +++ b/keyboards/xd60/keymaps/stanleylai/keymap.c @@ -28,22 +28,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd60/keymaps/supercoffee/keymap.c b/keyboards/xd60/keymaps/supercoffee/keymap.c index 4bf30398f5b..c31a948a821 100644 --- a/keyboards/xd60/keymaps/supercoffee/keymap.c +++ b/keyboards/xd60/keymaps/supercoffee/keymap.c @@ -20,22 +20,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_NO, KC_RGUI, KC_RCTL), }; - -// Macros -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { register_code(KC_RSFT); } - else { unregister_code(KC_RSFT); } - break; - } - - return MACRO_NONE; -}; - -// Loop -void matrix_scan_user(void) { - // Empty -}; diff --git a/keyboards/xd75/keymaps/boy_314/keymap.c b/keyboards/xd75/keymaps/boy_314/keymap.c index 01c3a3626ae..89d6569ddc8 100644 --- a/keyboards/xd75/keymaps/boy_314/keymap.c +++ b/keyboards/xd75/keymaps/boy_314/keymap.c @@ -125,25 +125,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - void matrix_init_user(void) { if (!(host_keyboard_leds() & (1<event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/xd75/keymaps/dyn_macro_tap_dance/keymap.c b/keyboards/xd75/keymaps/dyn_macro_tap_dance/keymap.c index 220c85ddec5..679684976b4 100644 --- a/keyboards/xd75/keymaps/dyn_macro_tap_dance/keymap.c +++ b/keyboards/xd75/keymaps/dyn_macro_tap_dance/keymap.c @@ -113,21 +113,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, RGB_TOG, MO(_FN), RGB_RMOD,RGB_MOD, KC_P0, _______, KC_PDOT, KC_PENT, KC_PENT, MO(_FN), _______, _______, _______ ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboards/xd75/keymaps/kim-kim-xd73/keymap.c b/keyboards/xd75/keymaps/kim-kim-xd73/keymap.c index edbcfe97be0..fdcc47cabe2 100644 --- a/keyboards/xd75/keymaps/kim-kim-xd73/keymap.c +++ b/keyboards/xd75/keymaps/kim-kim-xd73/keymap.c @@ -115,21 +115,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - - #endif - } else { - #ifdef BACKLIGHT_ENABLE - - #endif - } - } - return MACRO_NONE; -}; diff --git a/keyboards/xd75/keymaps/kim-kim/keymap.c b/keyboards/xd75/keymaps/kim-kim/keymap.c index 0557074dc54..486a3743a47 100644 --- a/keyboards/xd75/keymaps/kim-kim/keymap.c +++ b/keyboards/xd75/keymaps/kim-kim/keymap.c @@ -115,21 +115,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - #ifdef BACKLIGHT_ENABLE - - #endif - } else { - #ifdef BACKLIGHT_ENABLE - - #endif - } - } - return MACRO_NONE; -}; diff --git a/keyboards/xd75/keymaps/kloki/keymap.c b/keyboards/xd75/keymaps/kloki/keymap.c index d9a67e8b75a..a630019347a 100644 --- a/keyboards/xd75/keymaps/kloki/keymap.c +++ b/keyboards/xd75/keymaps/kloki/keymap.c @@ -65,24 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - #ifdef BACKLIGHT_ENABLE - backlight_step(); - #endif - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - bool CTRLDOWN = false; bool WINDOWN = false; bool SHIFTDOWN = false; diff --git a/layouts/community/60_iso/unxmaal/keymap.c b/layouts/community/60_iso/unxmaal/keymap.c index 9441997b4bf..5c8325e62f5 100644 --- a/layouts/community/60_iso/unxmaal/keymap.c +++ b/layouts/community/60_iso/unxmaal/keymap.c @@ -119,21 +119,6 @@ const uint16_t PROGMEM fn_actions[] = { [12] = ACTION_FUNCTION(SHIFT_ESC), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - void matrix_scan_user(void) { // Layer LED indicators diff --git a/layouts/community/ergodox/adam/keymap.c b/layouts/community/ergodox/adam/keymap.c index d17f0b83b6d..50270838aa7 100644 --- a/layouts/community/ergodox/adam/keymap.c +++ b/layouts/community/ergodox/adam/keymap.c @@ -127,26 +127,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/adnw_k_o_y/keymap.c b/layouts/community/ergodox/adnw_k_o_y/keymap.c index 59ae2681f3f..6ade0001ce0 100644 --- a/layouts/community/ergodox/adnw_k_o_y/keymap.c +++ b/layouts/community/ergodox/adnw_k_o_y/keymap.c @@ -136,26 +136,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/andrew_osx/keymap.c b/layouts/community/ergodox/andrew_osx/keymap.c index 8fb570bd757..990fea4f45b 100644 --- a/layouts/community/ergodox/andrew_osx/keymap.c +++ b/layouts/community/ergodox/andrew_osx/keymap.c @@ -138,26 +138,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/coderkun_neo2/keymap.c b/layouts/community/ergodox/coderkun_neo2/keymap.c index d1fcea9c912..a6fe61079d7 100644 --- a/layouts/community/ergodox/coderkun_neo2/keymap.c +++ b/layouts/community/ergodox/coderkun_neo2/keymap.c @@ -221,25 +221,6 @@ const uint16_t PROGMEM fn_actions[] = { [PMN] = ACTION_FUNCTION(PMN), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } - else { - unregister_code(KC_RSFT); - } - break; - } - - return MACRO_NONE; -}; - - // Runs just one time when the keyboard initializes. void matrix_init_user(void) { set_unicode_input_mode(UC_LNX); diff --git a/layouts/community/ergodox/colemak/keymap.c b/layouts/community/ergodox/colemak/keymap.c index 83c77e4a343..54b0c5834a3 100644 --- a/layouts/community/ergodox/colemak/keymap.c +++ b/layouts/community/ergodox/colemak/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dave/keymap.c b/layouts/community/ergodox/dave/keymap.c index f47f881425d..efa270c4060 100644 --- a/layouts/community/ergodox/dave/keymap.c +++ b/layouts/community/ergodox/dave/keymap.c @@ -137,26 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { /* leds is a static array holding the current brightness of each of the diff --git a/layouts/community/ergodox/dragon788/keymap.c b/layouts/community/ergodox/dragon788/keymap.c index 7377128ecc0..e7778648516 100644 --- a/layouts/community/ergodox/dragon788/keymap.c +++ b/layouts/community/ergodox/dragon788/keymap.c @@ -180,26 +180,6 @@ LAYOUT_ergodox( }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dvorak/keymap.c b/layouts/community/ergodox/dvorak/keymap.c index 4d8483f5447..68b575fd68f 100644 --- a/layouts/community/ergodox/dvorak/keymap.c +++ b/layouts/community/ergodox/dvorak/keymap.c @@ -135,26 +135,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dvorak_emacs/keymap.c b/layouts/community/ergodox/dvorak_emacs/keymap.c index 244dfe521d0..6055fd770d4 100644 --- a/layouts/community/ergodox/dvorak_emacs/keymap.c +++ b/layouts/community/ergodox/dvorak_emacs/keymap.c @@ -117,26 +117,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dvorak_emacs_software/keymap.c b/layouts/community/ergodox/dvorak_emacs_software/keymap.c index 720dcde12b3..4f90f193c6f 100644 --- a/layouts/community/ergodox/dvorak_emacs_software/keymap.c +++ b/layouts/community/ergodox/dvorak_emacs_software/keymap.c @@ -118,26 +118,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dvorak_intl_squisher/keymap.c b/layouts/community/ergodox/dvorak_intl_squisher/keymap.c index 98e288516b9..3ebbd2df09c 100644 --- a/layouts/community/ergodox/dvorak_intl_squisher/keymap.c +++ b/layouts/community/ergodox/dvorak_intl_squisher/keymap.c @@ -136,26 +136,6 @@ LAYOUT_ergodox( // layer 0 : default ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/dvorak_plover/keymap.c b/layouts/community/ergodox/dvorak_plover/keymap.c index 24746c751da..882a351d18a 100644 --- a/layouts/community/ergodox/dvorak_plover/keymap.c +++ b/layouts/community/ergodox/dvorak_plover/keymap.c @@ -178,26 +178,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/emacs_osx_dk/keymap.c b/layouts/community/ergodox/emacs_osx_dk/keymap.c index c34d9f65b00..1de894616b5 100644 --- a/layouts/community/ergodox/emacs_osx_dk/keymap.c +++ b/layouts/community/ergodox/emacs_osx_dk/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/german-kinergo/keymap.c b/layouts/community/ergodox/german-kinergo/keymap.c index 20651df0fbb..d9c29781406 100644 --- a/layouts/community/ergodox/german-kinergo/keymap.c +++ b/layouts/community/ergodox/german-kinergo/keymap.c @@ -162,26 +162,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/german-lukas/keymap.c b/layouts/community/ergodox/german-lukas/keymap.c index 373a1e0440a..cbc51c69593 100644 --- a/layouts/community/ergodox/german-lukas/keymap.c +++ b/layouts/community/ergodox/german-lukas/keymap.c @@ -185,26 +185,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/german/keymap.c b/layouts/community/ergodox/german/keymap.c index 83ead2eb247..c64057dc4c6 100644 --- a/layouts/community/ergodox/german/keymap.c +++ b/layouts/community/ergodox/german/keymap.c @@ -137,26 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/guni/keymap.c b/layouts/community/ergodox/guni/keymap.c index ff1dd72eb09..0707bcf7748 100644 --- a/layouts/community/ergodox/guni/keymap.c +++ b/layouts/community/ergodox/guni/keymap.c @@ -127,28 +127,6 @@ const uint16_t PROGMEM fn_actions[] = { [26] = ACTION_LAYER_SET(1, ON_PRESS), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - - void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) { diff --git a/layouts/community/ergodox/haegin/keymap.c b/layouts/community/ergodox/haegin/keymap.c index b7e382957f8..fbbe3e72e0f 100644 --- a/layouts/community/ergodox/haegin/keymap.c +++ b/layouts/community/ergodox/haegin/keymap.c @@ -223,26 +223,6 @@ qk_tap_dance_action_t tap_dance_actions[] = { [TD_BSPC] = ACTION_TAP_DANCE_FN_ADVANCED (dance_backspace, dance_backspace_ended, dance_backspace_reset) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/j3rn/keymap.c b/layouts/community/ergodox/j3rn/keymap.c index ae084b6e92a..5081ddf5274 100644 --- a/layouts/community/ergodox/j3rn/keymap.c +++ b/layouts/community/ergodox/j3rn/keymap.c @@ -138,26 +138,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/jacobono/keymap.c b/layouts/community/ergodox/jacobono/keymap.c index 62858f8dd09..e97209fc84b 100644 --- a/layouts/community/ergodox/jacobono/keymap.c +++ b/layouts/community/ergodox/jacobono/keymap.c @@ -224,26 +224,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_WBAK), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/jafo/keymap.c b/layouts/community/ergodox/jafo/keymap.c index 4737ab710d4..b8b8e63517d 100644 --- a/layouts/community/ergodox/jafo/keymap.c +++ b/layouts/community/ergodox/jafo/keymap.c @@ -136,24 +136,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/jgarr/keymap.c b/layouts/community/ergodox/jgarr/keymap.c index 84b573aca29..ac4e5622636 100644 --- a/layouts/community/ergodox/jgarr/keymap.c +++ b/layouts/community/ergodox/jgarr/keymap.c @@ -135,26 +135,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/kastyle/keymap.c b/layouts/community/ergodox/kastyle/keymap.c index 32eec96f506..c9789955b32 100644 --- a/layouts/community/ergodox/kastyle/keymap.c +++ b/layouts/community/ergodox/kastyle/keymap.c @@ -140,26 +140,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/kejadlen/keymap.c b/layouts/community/ergodox/kejadlen/keymap.c index cfeb7043041..6ce209f8060 100644 --- a/layouts/community/ergodox/kejadlen/keymap.c +++ b/layouts/community/ergodox/kejadlen/keymap.c @@ -73,17 +73,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch(id) { - case TEENSY: - break; - } - return MACRO_NONE; -}; - -void matrix_init_user(void) { -}; - void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/kines-ish/keymap.c b/layouts/community/ergodox/kines-ish/keymap.c index 6f0d99d8db0..8acab5ca522 100644 --- a/layouts/community/ergodox/kines-ish/keymap.c +++ b/layouts/community/ergodox/kines-ish/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/maz/keymap.c b/layouts/community/ergodox/maz/keymap.c index c36821ded24..3244f2152d9 100644 --- a/layouts/community/ergodox/maz/keymap.c +++ b/layouts/community/ergodox/maz/keymap.c @@ -180,26 +180,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/mclennon_osx/keymap.c b/layouts/community/ergodox/mclennon_osx/keymap.c index aeea456ecab..72e9d505a12 100644 --- a/layouts/community/ergodox/mclennon_osx/keymap.c +++ b/layouts/community/ergodox/mclennon_osx/keymap.c @@ -95,26 +95,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/msc/keymap.c b/layouts/community/ergodox/msc/keymap.c index 62c2ec7b53c..5d9de3239b8 100644 --- a/layouts/community/ergodox/msc/keymap.c +++ b/layouts/community/ergodox/msc/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/naps62/keymap.c b/layouts/community/ergodox/naps62/keymap.c index a242a14fe94..230b3376b27 100644 --- a/layouts/community/ergodox/naps62/keymap.c +++ b/layouts/community/ergodox/naps62/keymap.c @@ -138,26 +138,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/neo2_on_qwertz_hardware/keymap.c b/layouts/community/ergodox/neo2_on_qwertz_hardware/keymap.c index f93f03e92e4..85782dda744 100644 --- a/layouts/community/ergodox/neo2_on_qwertz_hardware/keymap.c +++ b/layouts/community/ergodox/neo2_on_qwertz_hardware/keymap.c @@ -342,28 +342,6 @@ void unicode_action_function(uint16_t hi, uint16_t lo) { } } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (!record->event.pressed) { - return MACRO_NONE; - } - // MACRODOWN only works in this function - switch(id) { - case UM: - unicode_mode = (unicode_mode + 1) % 2; - break; - - - default: - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/osx_de_adnw_koy/keymap.c b/layouts/community/ergodox/osx_de_adnw_koy/keymap.c index 8fc0f1fd94a..08b11cccdf7 100644 --- a/layouts/community/ergodox/osx_de_adnw_koy/keymap.c +++ b/layouts/community/ergodox/osx_de_adnw_koy/keymap.c @@ -122,34 +122,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ -switch(id) { -case UNUSED: -//Macro: UNUSED//----------------------- - - - - - - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - - - -break; -} -return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/osx_fr/keymap.c b/layouts/community/ergodox/osx_fr/keymap.c index dba9bf32bec..09ef0edb69e 100644 --- a/layouts/community/ergodox/osx_fr/keymap.c +++ b/layouts/community/ergodox/osx_fr/keymap.c @@ -138,26 +138,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/osx_kinesis_pnut/keymap.c b/layouts/community/ergodox/osx_kinesis_pnut/keymap.c index 21e383bd266..ad6ea273642 100644 --- a/layouts/community/ergodox/osx_kinesis_pnut/keymap.c +++ b/layouts/community/ergodox/osx_kinesis_pnut/keymap.c @@ -142,26 +142,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/phoenix/keymap.c b/layouts/community/ergodox/phoenix/keymap.c index b9be7e2b897..a66462e3a8e 100644 --- a/layouts/community/ergodox/phoenix/keymap.c +++ b/layouts/community/ergodox/phoenix/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/plover/keymap.c b/layouts/community/ergodox/plover/keymap.c index 0ab60ffbb89..b196346436b 100644 --- a/layouts/community/ergodox/plover/keymap.c +++ b/layouts/community/ergodox/plover/keymap.c @@ -179,26 +179,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/robot_test_layout/keymap.c b/layouts/community/ergodox/robot_test_layout/keymap.c index 07b294a9856..4bdda3ae83c 100644 --- a/layouts/community/ergodox/robot_test_layout/keymap.c +++ b/layouts/community/ergodox/robot_test_layout/keymap.c @@ -43,18 +43,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - bool status_led1_on = false, status_led2_on = false, status_led3_on = false; bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { diff --git a/layouts/community/ergodox/romanzolotarev-norman-osx/keymap.c b/layouts/community/ergodox/romanzolotarev-norman-osx/keymap.c index caead7e160f..c8ee21990bf 100644 --- a/layouts/community/ergodox/romanzolotarev-norman-osx/keymap.c +++ b/layouts/community/ergodox/romanzolotarev-norman-osx/keymap.c @@ -26,10 +26,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -}; - // Runs just one time when the keyboard initializes. void matrix_init_user(void) { ergodox_board_led_off(); @@ -37,7 +33,3 @@ void matrix_init_user(void) { ergodox_right_led_2_off(); ergodox_right_led_3_off(); }; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; diff --git a/layouts/community/ergodox/romanzolotarev-norman-plover-osx-hjkl/keymap.c b/layouts/community/ergodox/romanzolotarev-norman-plover-osx-hjkl/keymap.c index 866aa22f934..819944121e4 100644 --- a/layouts/community/ergodox/romanzolotarev-norman-plover-osx-hjkl/keymap.c +++ b/layouts/community/ergodox/romanzolotarev-norman-plover-osx-hjkl/keymap.c @@ -86,25 +86,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/romanzolotarev-norman-plover-osx/keymap.c b/layouts/community/ergodox/romanzolotarev-norman-plover-osx/keymap.c index 08aad4f2264..a0964fac77c 100644 --- a/layouts/community/ergodox/romanzolotarev-norman-plover-osx/keymap.c +++ b/layouts/community/ergodox/romanzolotarev-norman-plover-osx/keymap.c @@ -86,25 +86,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/romanzolotarev-norman-qwerty-osx/keymap.c b/layouts/community/ergodox/romanzolotarev-norman-qwerty-osx/keymap.c index ffa106f7058..6aca3a6d5fa 100644 --- a/layouts/community/ergodox/romanzolotarev-norman-qwerty-osx/keymap.c +++ b/layouts/community/ergodox/romanzolotarev-norman-qwerty-osx/keymap.c @@ -46,14 +46,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/siroken3/keymap.c b/layouts/community/ergodox/siroken3/keymap.c index 98422b440a6..fed8b4a0c85 100644 --- a/layouts/community/ergodox/siroken3/keymap.c +++ b/layouts/community/ergodox/siroken3/keymap.c @@ -138,26 +138,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/sneako/keymap.c b/layouts/community/ergodox/sneako/keymap.c index 313e597d7b7..9d3cdd5a118 100644 --- a/layouts/community/ergodox/sneako/keymap.c +++ b/layouts/community/ergodox/sneako/keymap.c @@ -138,26 +138,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/software_neo2/keymap.c b/layouts/community/ergodox/software_neo2/keymap.c index 73e0694ba00..8f733760106 100644 --- a/layouts/community/ergodox/software_neo2/keymap.c +++ b/layouts/community/ergodox/software_neo2/keymap.c @@ -95,26 +95,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/supercoder/keymap.c b/layouts/community/ergodox/supercoder/keymap.c index 3aa34a8e42d..9efe09fcf51 100644 --- a/layouts/community/ergodox/supercoder/keymap.c +++ b/layouts/community/ergodox/supercoder/keymap.c @@ -57,16 +57,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_ENT ,KC_ENT ,KC_ENT ), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -} diff --git a/layouts/community/ergodox/swedish/keymap.c b/layouts/community/ergodox/swedish/keymap.c index 454dcc35cc1..8ef15d097d7 100644 --- a/layouts/community/ergodox/swedish/keymap.c +++ b/layouts/community/ergodox/swedish/keymap.c @@ -167,24 +167,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - case 1: - if (record->event.pressed) { // For resetting EEPROM - eeconfig_init(); - } - break; - } - return MACRO_NONE; -}; - bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. diff --git a/layouts/community/ergodox/techtomas/keymap.c b/layouts/community/ergodox/techtomas/keymap.c index 07228c4c067..742eca03a42 100644 --- a/layouts/community/ergodox/techtomas/keymap.c +++ b/layouts/community/ergodox/techtomas/keymap.c @@ -177,26 +177,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/tkuichooseyou/keymap.c b/layouts/community/ergodox/tkuichooseyou/keymap.c index 9141cd1c74a..ea6c8f259fb 100644 --- a/layouts/community/ergodox/tkuichooseyou/keymap.c +++ b/layouts/community/ergodox/tkuichooseyou/keymap.c @@ -135,26 +135,6 @@ LAYOUT_ergodox( ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/tonyabra_osx/keymap.c b/layouts/community/ergodox/tonyabra_osx/keymap.c index 469c2194407..741a6396e80 100644 --- a/layouts/community/ergodox/tonyabra_osx/keymap.c +++ b/layouts/community/ergodox/tonyabra_osx/keymap.c @@ -135,26 +135,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ergodox/twentylives_dvorak_with_hebrew/keymap.c b/layouts/community/ergodox/twentylives_dvorak_with_hebrew/keymap.c index 6bca1831623..4b5181a70d3 100644 --- a/layouts/community/ergodox/twentylives_dvorak_with_hebrew/keymap.c +++ b/layouts/community/ergodox/twentylives_dvorak_with_hebrew/keymap.c @@ -173,18 +173,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: - if (record->event.pressed) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); - } - break; - } - return MACRO_NONE; -}; - void matrix_scan_user(void) { uint8_t layer = biton32(layer_state); diff --git a/layouts/community/ergodox/yoruian/keymap.c b/layouts/community/ergodox/yoruian/keymap.c index b304fa07041..a5ffcd886c0 100644 --- a/layouts/community/ergodox/yoruian/keymap.c +++ b/layouts/community/ergodox/yoruian/keymap.c @@ -37,13 +37,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TR, TR, TR, TR, TR, TR), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; -}; - -void matrix_init_user(void) { -}; - void matrix_scan_user(void) { ergodox_board_led_off(); ergodox_right_led_1_off(); diff --git a/layouts/community/ergodox/zweihander-macos/keymap.c b/layouts/community/ergodox/zweihander-macos/keymap.c index 93a435efb10..b2ddeb0d6b6 100644 --- a/layouts/community/ergodox/zweihander-macos/keymap.c +++ b/layouts/community/ergodox/zweihander-macos/keymap.c @@ -137,18 +137,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { diff --git a/layouts/community/ortho_4x12/mindsound/keymap.c b/layouts/community/ortho_4x12/mindsound/keymap.c index 03b0486c58f..613f11d1349 100644 --- a/layouts/community/ortho_4x12/mindsound/keymap.c +++ b/layouts/community/ortho_4x12/mindsound/keymap.c @@ -133,11 +133,6 @@ void matrix_init_user(void) { } #endif -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - void persistant_default_layer_set(uint16_t default_layer) { eeconfig_update_default_layer(default_layer); default_layer_set(default_layer); From 79d1db332477963555416d9fff82ecac4399bd52 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 12 Jan 2021 19:48:24 +1100 Subject: [PATCH 060/145] Keep track of last matrix activity (#10730) * Allow recording of the last matrix activity time, to simplify implementation of display timeouts and the like. * Add requested changes from code review. * Simplify split matrix last changed. --- quantum/split_common/matrix.c | 29 ++++++++++++++++++++--------- tmk_core/common/keyboard.c | 13 +++++++------ tmk_core/common/keyboard.h | 3 +++ 3 files changed, 30 insertions(+), 15 deletions(-) diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index 51bf8b10956..06bab734e74 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -245,48 +245,59 @@ void matrix_init(void) { split_post_init(); } -void matrix_post_scan(void) { +bool matrix_post_scan(void) { + bool changed = false; if (is_keyboard_master()) { static uint8_t error_count; - if (!transport_master(matrix + thatHand)) { + matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; + if (!transport_master(slave_matrix)) { error_count++; if (error_count > ERROR_DISCONNECT_COUNT) { // reset other half if disconnected for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; + slave_matrix[i] = 0; } } } else { error_count = 0; } + for (int i = 0; i < ROWS_PER_HAND; ++i) { + if (matrix[thatHand + i] != slave_matrix[i]) { + matrix[thatHand + i] = slave_matrix[i]; + changed = true; + } + } + matrix_scan_quantum(); } else { transport_slave(matrix + thisHand); matrix_slave_scan_user(); } + + return changed; } uint8_t matrix_scan(void) { - bool changed = false; + bool local_changed = false; #if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); + local_changed |= read_cols_on_row(raw_matrix, current_row); } #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); + local_changed |= read_rows_on_col(raw_matrix, current_col); } #endif - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, local_changed); - matrix_post_scan(); - return (uint8_t)changed; + bool remote_changed = matrix_post_scan(); + return (uint8_t)(local_changed || remote_changed); } diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index a1fbc01da67..aea09169fb2 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -97,6 +97,10 @@ along with this program. If not, see . # include "dip_switch.h" #endif +static uint32_t last_matrix_modification_time = 0; +uint32_t last_matrix_activity_time(void) { return last_matrix_modification_time; } +uint32_t last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); } + // Only enable this if console is enabled to print to #if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE) static uint32_t matrix_timer = 0; @@ -338,11 +342,8 @@ void keyboard_task(void) { housekeeping_task_kb(); housekeeping_task_user(); -#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) - uint8_t ret = matrix_scan(); -#else - matrix_scan(); -#endif + uint8_t matrix_changed = matrix_scan(); + if (matrix_changed) last_matrix_modification_time = timer_read32(); if (should_process_keypress()) { for (uint8_t r = 0; r < MATRIX_ROWS; r++) { @@ -409,7 +410,7 @@ MATRIX_LOOP_END: oled_task(); # ifndef OLED_DISABLE_TIMEOUT // Wake up oled if user is using those fabulous keys! - if (ret) oled_on(); + if (matrix_changed) oled_on(); # endif #endif diff --git a/tmk_core/common/keyboard.h b/tmk_core/common/keyboard.h index d04e685cdb2..cc5b2e5e422 100644 --- a/tmk_core/common/keyboard.h +++ b/tmk_core/common/keyboard.h @@ -73,6 +73,9 @@ void keyboard_post_init_user(void); void housekeeping_task_kb(void); void housekeeping_task_user(void); +uint32_t last_matrix_activity_time(void); // Timestamp of the last matrix activity +uint32_t last_matrix_activity_elapsed(void); // Number of milliseconds since the last matrix activity + #ifdef __cplusplus } #endif From 017aa5988af308ae6d585b4afea6f28c28e2d238 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 13 Jan 2021 11:19:56 +1100 Subject: [PATCH 061/145] ChibiOS conf migrations... take 7 (#11529) * ChibiOS conf upgrade for alpine65 alpine65 - 91e88b87653234a9023f4ad98913a6ea52c8b3fb * ChibiOS conf upgrade for cannonkeys/onyx cannonkeys/onyx - 2adf507afd4e288761a675de9cfbb6e34c540e29 * ChibiOS conf upgrade for ck60i ck60i - 98be5d22a3cd1b38d92e080f32c4795260db181b * ChibiOS conf upgrade for cutie_club/borsdorf cutie_club/borsdorf - 81734ebf770ab731ca8dcfac6fce5574e948890e --- keyboards/alpine65/chconf.h | 729 +----------------------- keyboards/alpine65/halconf.h | 536 +---------------- keyboards/alpine65/mcuconf.h | 185 +----- keyboards/cannonkeys/onyx/chconf.h | 729 +----------------------- keyboards/cannonkeys/onyx/halconf.h | 536 +---------------- keyboards/cannonkeys/onyx/mcuconf.h | 186 +----- keyboards/ck60i/chconf.h | 729 +----------------------- keyboards/ck60i/halconf.h | 536 +---------------- keyboards/ck60i/mcuconf.h | 186 +----- keyboards/cutie_club/borsdorf/chconf.h | 729 +----------------------- keyboards/cutie_club/borsdorf/halconf.h | 525 ----------------- keyboards/cutie_club/borsdorf/mcuconf.h | 183 +----- 12 files changed, 256 insertions(+), 5533 deletions(-) delete mode 100644 keyboards/cutie_club/borsdorf/halconf.h diff --git a/keyboards/alpine65/chconf.h b/keyboards/alpine65/chconf.h index 4640ff5332b..f17a54bb967 100644 --- a/keyboards/alpine65/chconf.h +++ b/keyboards/alpine65/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/alpine65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/alpine65/halconf.h b/keyboards/alpine65/halconf.h index df71dd64c42..96c8fe20354 100644 --- a/keyboards/alpine65/halconf.h +++ b/keyboards/alpine65/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/alpine65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/alpine65/mcuconf.h b/keyboards/alpine65/mcuconf.h index 4b5afe73ecc..17f09b3501f 100644 --- a/keyboards/alpine65/mcuconf.h +++ b/keyboards/alpine65/mcuconf.h @@ -1,176 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/alpine65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/onyx/chconf.h b/keyboards/cannonkeys/onyx/chconf.h index 03f63da36a8..40acee69899 100644 --- a/keyboards/cannonkeys/onyx/chconf.h +++ b/keyboards/cannonkeys/onyx/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MEMCORE TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cannonkeys/onyx/halconf.h b/keyboards/cannonkeys/onyx/halconf.h index adb1a907154..be72dfa4cb5 100644 --- a/keyboards/cannonkeys/onyx/halconf.h +++ b/keyboards/cannonkeys/onyx/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cannonkeys/onyx/mcuconf.h b/keyboards/cannonkeys/onyx/mcuconf.h index 048eb4df650..11a084f4729 100644 --- a/keyboards/cannonkeys/onyx/mcuconf.h +++ b/keyboards/cannonkeys/onyx/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/ck60i/chconf.h b/keyboards/ck60i/chconf.h index 4640ff5332b..545a54936be 100644 --- a/keyboards/ck60i/chconf.h +++ b/keyboards/ck60i/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ck60i/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ck60i/halconf.h b/keyboards/ck60i/halconf.h index 921803762ea..0756a1153a6 100644 --- a/keyboards/ck60i/halconf.h +++ b/keyboards/ck60i/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ck60i/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/ck60i/mcuconf.h b/keyboards/ck60i/mcuconf.h index 5df5e5cc4cd..f6cf5753c80 100644 --- a/keyboards/ck60i/mcuconf.h +++ b/keyboards/ck60i/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ck60i/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_DMA +#define STM32_I2C_USE_DMA FALSE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA FALSE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cutie_club/borsdorf/chconf.h b/keyboards/cutie_club/borsdorf/chconf.h index 03f63da36a8..20dd0204306 100644 --- a/keyboards/cutie_club/borsdorf/chconf.h +++ b/keyboards/cutie_club/borsdorf/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cutie_club/borsdorf/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MEMCORE TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/cutie_club/borsdorf/halconf.h b/keyboards/cutie_club/borsdorf/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/cutie_club/borsdorf/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/cutie_club/borsdorf/mcuconf.h b/keyboards/cutie_club/borsdorf/mcuconf.h index 03770fb1933..84e0e18b1f5 100644 --- a/keyboards/cutie_club/borsdorf/mcuconf.h +++ b/keyboards/cutie_club/borsdorf/mcuconf.h @@ -1,175 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/cutie_club/borsdorf/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From 302b35c2a0ac90208e523944e8cc4b44a793d8d5 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Wed, 13 Jan 2021 10:46:22 +0900 Subject: [PATCH 062/145] fix matrix_io_delay() timing in quantum/matrix.c (#9603) * fix matrix_io_delay() timing in quantum/matrix.c * Updated comments explaining the need for matrix_io_delay() in quantum/matrix.c * fix matrix_io_delay() timing in quantum/split_common/matrix.c * Update quantum/matrix.c Co-authored-by: Ryan * Update quantum/split_common/matrix.c Co-authored-by: Ryan * Update quantum/matrix.c Co-authored-by: Ryan * Update quantum/split_common/matrix.c Co-authored-by: Ryan * add waitOutputPinValid() and wait_cpuclock() into quantum/quantum.h and tmk_core/common/wait.h * add matrix_output_select_delay() and matrix_output_unselect_delay() * fix quantum/matrix_common.c, tmk_core/common/matrix.h * fix tmk_core/common/wait.h * fix quantum/quantum.h, tmk_core/common/wait.h * waitOutputPinValid() rename to waitInputPinDelay() in quantum/quantum.h. * waitOutputPinValid() rename to waitInputPinDelay() in quantum/matrix_common.c * update tmk_core/common/wait.h * update comment in quantum/matrix.c, quantum/split_common/matrix.c * update quantum/quantum.h: Make more margin in the GPIO_INPUT_PIN_DELAY default value. Co-authored-by: Ryan --- quantum/matrix.c | 14 +++++++--- quantum/matrix_common.c | 5 ++++ quantum/quantum.h | 29 +++++++++++++++++++ quantum/split_common/matrix.c | 14 +++++++--- tmk_core/common/matrix.h | 3 ++ tmk_core/common/wait.h | 52 +++++++++++++++++++++++++++++++++++ 6 files changed, 109 insertions(+), 8 deletions(-) diff --git a/quantum/matrix.c b/quantum/matrix.c index 9083ff38617..c027b7bf27a 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -101,9 +101,9 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) // Start with a clear matrix row matrix_row_t current_row_value = 0; - // Select row and wait for row selecton to stabilize + // Select row select_row(current_row); - matrix_io_delay(); + matrix_output_select_delay(); // For each col... for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { @@ -116,6 +116,9 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) // Unselect row unselect_row(current_row); + if (current_row + 1 < MATRIX_ROWS) { + matrix_output_unselect_delay(); // wait for row signal to go HIGH + } // If the row has changed, store the row and return the changed flag. if (current_matrix[current_row] != current_row_value) { @@ -147,9 +150,9 @@ static void init_pins(void) { static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { bool matrix_changed = false; - // Select col and wait for col selecton to stabilize + // Select col select_col(current_col); - matrix_io_delay(); + matrix_output_select_delay(); // For each row... for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { @@ -175,6 +178,9 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) // Unselect col unselect_col(current_col); + if (current_col + 1 < MATRIX_COLS) { + matrix_output_unselect_delay(); // wait for col signal to go HIGH + } return matrix_changed; } diff --git a/quantum/matrix_common.c b/quantum/matrix_common.c index 15f1e0e82e7..01d2b38e5e5 100644 --- a/quantum/matrix_common.c +++ b/quantum/matrix_common.c @@ -1,3 +1,4 @@ +#include "quantum.h" #include "matrix.h" #include "debounce.h" #include "wait.h" @@ -83,8 +84,12 @@ uint8_t matrix_key_count(void) { return count; } +/*　`matrix_io_delay ()` exists for backwards compatibility. From now on, use matrix_output_unselect_delay().　*/ __attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); } +__attribute__((weak)) void matrix_output_select_delay(void) { waitInputPinDelay(); } +__attribute__((weak)) void matrix_output_unselect_delay(void) { matrix_io_delay(); } + // CUSTOM MATRIX 'LITE' __attribute__((weak)) void matrix_init_custom(void) {} diff --git a/quantum/quantum.h b/quantum/quantum.h index 83694c8324f..d234e6ea0dc 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -210,6 +210,13 @@ typedef uint8_t pin_t; # define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF)) +/* The AVR series GPIOs have a one clock read delay for changes in the digital input signal. + * But here's more margin to make it two clocks. */ +# if !defined(GPIO_INPUT_PIN_DELAY) +# define GPIO_INPUT_PIN_DELAY 2 +# endif +# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY) + #elif defined(PROTOCOL_CHIBIOS) typedef ioline_t pin_t; @@ -225,6 +232,28 @@ typedef ioline_t pin_t; # define readPin(pin) palReadLine(pin) # define togglePin(pin) palToggleLine(pin) + +#endif + +#if defined(__ARMEL__) || defined(__ARMEB__) +/* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus + * to which the GPIO is connected. + * The connected buses differ depending on the various series of MCUs. + * And since the instruction execution clock of the CPU and the bus clock of GPIO are different, + * there is a delay of several clocks to read the change of the input signal. + * + * Define this delay with the GPIO_INPUT_PIN_DELAY macro. + * If the GPIO_INPUT_PIN_DELAY macro is not defined, the following default values will be used. + * (A fairly large value of 0.25 microseconds is set.) + */ +# if !defined(GPIO_INPUT_PIN_DELAY) +# if defined(STM32_SYSCLK) +# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK/1000000L / 4) +# elif defined(KINETIS_SYSCLK_FREQUENCY) +# define GPIO_INPUT_PIN_DELAY (KINETIS_SYSCLK_FREQUENCY/1000000L / 4) +# endif +# endif +# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY) #endif // Atomic macro to help make GPIO and other controls atomic. diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index 06bab734e74..067815c9914 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -114,9 +114,9 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) // Start with a clear matrix row matrix_row_t current_row_value = 0; - // Select row and wait for row selecton to stabilize + // Select row select_row(current_row); - matrix_io_delay(); + matrix_output_select_delay(); // For each col... for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { @@ -129,6 +129,9 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) // Unselect row unselect_row(current_row); + if (current_row + 1 < MATRIX_ROWS) { + matrix_output_unselect_delay(); // wait for row signal to go HIGH + } // If the row has changed, store the row and return the changed flag. if (current_matrix[current_row] != current_row_value) { @@ -160,9 +163,9 @@ static void init_pins(void) { static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { bool matrix_changed = false; - // Select col and wait for col selecton to stabilize + // Select col select_col(current_col); - matrix_io_delay(); + matrix_output_select_delay(); // For each row... for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) { @@ -188,6 +191,9 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) // Unselect col unselect_col(current_col); + if (current_col + 1 < MATRIX_COLS) { + matrix_output_unselect_delay(); // wait for col signal to go HIGH + } return matrix_changed; } diff --git a/tmk_core/common/matrix.h b/tmk_core/common/matrix.h index b570227a314..ce57010a475 100644 --- a/tmk_core/common/matrix.h +++ b/tmk_core/common/matrix.h @@ -55,6 +55,9 @@ matrix_row_t matrix_get_row(uint8_t row); /* print matrix for debug */ void matrix_print(void); /* delay between changing matrix pin state and reading values */ +void matrix_output_select_delay(void); +void matrix_output_unselect_delay(void); +/* only for backwards compatibility. delay between changing matrix pin state and reading values */ void matrix_io_delay(void); /* power control */ diff --git a/tmk_core/common/wait.h b/tmk_core/common/wait.h index 89128e9daf2..0b3fd755a96 100644 --- a/tmk_core/common/wait.h +++ b/tmk_core/common/wait.h @@ -6,10 +6,62 @@ extern "C" { #endif +#if defined(__ARMEL__) || defined(__ARMEB__) +# ifndef __OPTIMIZE__ +# pragma message "Compiler optimizations disabled; wait_cpuclock() won't work as designed" +# endif + +# define wait_cpuclock(x) wait_cpuclock_allnop(x) + +# define CLOCK_DELAY_NOP8 "nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t" + +__attribute__((always_inline)) +static inline void wait_cpuclock_allnop(unsigned int n) { /* n: 1..135 */ + /* The argument n must be a constant expression. + * That way, compiler optimization will remove unnecessary code. */ + if (n < 1) { return; } + if (n > 8) { + unsigned int n8 = n/8; + n = n - n8*8; + switch (n8) { + case 16: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 15: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 14: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 13: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 12: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 11: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 10: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 9: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 8: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 7: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 6: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 5: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 4: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 3: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 2: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 1: asm volatile (CLOCK_DELAY_NOP8::: "memory"); + case 0: break; + } + } + switch (n) { + case 8: asm volatile ("nop"::: "memory"); + case 7: asm volatile ("nop"::: "memory"); + case 6: asm volatile ("nop"::: "memory"); + case 5: asm volatile ("nop"::: "memory"); + case 4: asm volatile ("nop"::: "memory"); + case 3: asm volatile ("nop"::: "memory"); + case 2: asm volatile ("nop"::: "memory"); + case 1: asm volatile ("nop"::: "memory"); + case 0: break; + } +} +#endif + #if defined(__AVR__) # include # define wait_ms(ms) _delay_ms(ms) # define wait_us(us) _delay_us(us) +# define wait_cpuclock(x) __builtin_avr_delay_cycles(x) #elif defined PROTOCOL_CHIBIOS # include # define wait_ms(ms) \ From 3c8da5eba8f3e3f3d36fc2a531dd63998272f8ca Mon Sep 17 00:00:00 2001 From: Zach White Date: Tue, 12 Jan 2021 12:50:14 -0800 Subject: [PATCH 063/145] move the info.json rules above userspace --- build_keyboard.mk | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index 9685d1f6320..79fe336b48b 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -273,26 +273,6 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","") POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h endif -# Userspace setup and definitions -ifeq ("$(USER_NAME)","") - USER_NAME := $(KEYMAP) -endif -USER_PATH := users/$(USER_NAME) - --include $(USER_PATH)/rules.mk -ifneq ("$(wildcard $(USER_PATH)/config.h)","") - CONFIG_H += $(USER_PATH)/config.h -endif - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) - -ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") - CONFIG_H += $(KEYMAP_PATH)/config.h -endif - # Pull in stuff from info.json INFO_JSON_FILES := ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","") @@ -323,6 +303,26 @@ generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/lay .INTERMEDIATE : generated-files +# Userspace setup and definitions +ifeq ("$(USER_NAME)","") + USER_NAME := $(KEYMAP) +endif +USER_PATH := users/$(USER_NAME) + +-include $(USER_PATH)/rules.mk +ifneq ("$(wildcard $(USER_PATH)/config.h)","") + CONFIG_H += $(USER_PATH)/config.h +endif + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) + +ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") + CONFIG_H += $(KEYMAP_PATH)/config.h +endif + # project specific files SRC += $(KEYBOARD_SRC) \ $(KEYMAP_C) \ From f4cf0d2f282dbf19ea3e0427a146d90c88e1904c Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 13 Jan 2021 14:23:14 -0800 Subject: [PATCH 064/145] remove duplicate manufacturer --- keyboards/boardrun/bizarre/info.json | 1 - keyboards/boardrun/classic/info.json | 1 - keyboards/ergodox_ez/info.json | 1 - keyboards/ergotravel/info.json | 1 - keyboards/handwired/evk/info.json | 1 - keyboards/handwired/freoduo/info.json | 3 +-- keyboards/kiwikey/kawii9/info.json | 1 - keyboards/moonlander/info.json | 1 - keyboards/nopunin10did/railroad/rev0/info.json | 1 - keyboards/nullbitsco/info.json | 3 +-- keyboards/phoenix/info.json | 1 - keyboards/ploopyco/mouse/info.json | 1 - keyboards/ploopyco/trackball/info.json | 1 - keyboards/qwertyydox/info.json | 1 - keyboards/tkw/stoutgat/v2/info.json | 1 - keyboards/xd87/info.json | 1 - 16 files changed, 2 insertions(+), 18 deletions(-) diff --git a/keyboards/boardrun/bizarre/info.json b/keyboards/boardrun/bizarre/info.json index 3a10028714a..b03e25c81cd 100644 --- a/keyboards/boardrun/bizarre/info.json +++ b/keyboards/boardrun/bizarre/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Boardrun Bizarre", "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardrun/bizarre", "maintainer": "QMK Community", - "manufacturer": "shensmobile", "width": 21, "height": 5, "layouts": { diff --git a/keyboards/boardrun/classic/info.json b/keyboards/boardrun/classic/info.json index a37e6ece92d..4dc3c82a3f3 100644 --- a/keyboards/boardrun/classic/info.json +++ b/keyboards/boardrun/classic/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Boardrun Classic", "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/boardrun/classic", "maintainer": "QMK Community", - "manufacturer": "shensmobile", "width": 16.5, "height": 5, "layouts": { diff --git a/keyboards/ergodox_ez/info.json b/keyboards/ergodox_ez/info.json index 61ba58051da..6c5598b0837 100644 --- a/keyboards/ergodox_ez/info.json +++ b/keyboards/ergodox_ez/info.json @@ -2,7 +2,6 @@ "keyboard_name": "ErgoDox EZ", "url": "ergodox-ez.com", "maintainer": "ZSA via Drashna", - "manufacturer": "ZSA Technology Labs Inc", "width": 17, "height": 8, diff --git a/keyboards/ergotravel/info.json b/keyboards/ergotravel/info.json index 5cd19ced535..efc59f6a62e 100644 --- a/keyboards/ergotravel/info.json +++ b/keyboards/ergotravel/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "ErgoTravel", - "manufacturer": "jpconstantineau", "identifier": "0x1256", "url": "https://github.com/jpconstantineau/ErgoTravel", "maintainer": "qmk", diff --git a/keyboards/handwired/evk/info.json b/keyboards/handwired/evk/info.json index b7593cdd153..37902078ea4 100644 --- a/keyboards/handwired/evk/info.json +++ b/keyboards/handwired/evk/info.json @@ -1,4 +1,3 @@ { - "manufacturer": "YangPiCui", "maintainer": "YangPiCui" } diff --git a/keyboards/handwired/freoduo/info.json b/keyboards/handwired/freoduo/info.json index 5c2d7e17391..f977f3e602d 100644 --- a/keyboards/handwired/freoduo/info.json +++ b/keyboards/handwired/freoduo/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "Freoduo", -"manufacturer": "Filip Paryz", "url": "https://github.com/FilipParyz", "maintainer": "https://github.com/FilipParyz", "width": 12, @@ -69,4 +68,4 @@ ] } } -} \ No newline at end of file +} diff --git a/keyboards/kiwikey/kawii9/info.json b/keyboards/kiwikey/kawii9/info.json index 126afaab762..dac034f7e5f 100644 --- a/keyboards/kiwikey/kawii9/info.json +++ b/keyboards/kiwikey/kawii9/info.json @@ -1,7 +1,6 @@ { "keyboard_name": "Kawii9", "url": "http://kiwikey.vn/kawii9/", - "manufacturer": "KiwiKey", "maintainer": "KiwiKey", "width": 3, "height": 3, diff --git a/keyboards/moonlander/info.json b/keyboards/moonlander/info.json index 1a12b665a56..34f4e8a9aef 100644 --- a/keyboards/moonlander/info.json +++ b/keyboards/moonlander/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Moonlander Mark I", "url": "zsa.io/moonlander", "maintainer": "ZSA via Drashna", - "manufacturer": "ZSA Technology Labs Inc", "width": 17, "height": 8, diff --git a/keyboards/nopunin10did/railroad/rev0/info.json b/keyboards/nopunin10did/railroad/rev0/info.json index 4305c09dca3..2a07d4a295e 100644 --- a/keyboards/nopunin10did/railroad/rev0/info.json +++ b/keyboards/nopunin10did/railroad/rev0/info.json @@ -2,7 +2,6 @@ "keyboard_name": "The Railroad", "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/nopunin10did/railroad", "maintainer": "NoPunIn10Did", - "manufacturer": "NoPunIn10Did", "width": 23.5, "height": 5.25, "layouts": { diff --git a/keyboards/nullbitsco/info.json b/keyboards/nullbitsco/info.json index 193dbfe9b84..28adc903ad7 100644 --- a/keyboards/nullbitsco/info.json +++ b/keyboards/nullbitsco/info.json @@ -1,4 +1,3 @@ { - "manufacturer": "nullbits", "maintainer": "nullbitsco" -} \ No newline at end of file +} diff --git a/keyboards/phoenix/info.json b/keyboards/phoenix/info.json index f1275b9de61..368567fdec1 100644 --- a/keyboards/phoenix/info.json +++ b/keyboards/phoenix/info.json @@ -2,7 +2,6 @@ "keyboard_name": "Phoenix", "url": "ergokb.tw", "maintainer": "ErgoKB via lschyi", - "manufacturer": "ErgoKB", "width": 17, "height": 8, diff --git a/keyboards/ploopyco/mouse/info.json b/keyboards/ploopyco/mouse/info.json index 142bf2bef4a..79e62058f3b 100644 --- a/keyboards/ploopyco/mouse/info.json +++ b/keyboards/ploopyco/mouse/info.json @@ -2,7 +2,6 @@ "keyboard_name": "PloopyCo Mouse", "url": "www.ploopy.co", "maintainer": "drashna", - "manufacturer": "Ploopy Corporation", "width": 8, "height": 3, "layouts": { diff --git a/keyboards/ploopyco/trackball/info.json b/keyboards/ploopyco/trackball/info.json index c5e4527d8d1..d2fe797bba1 100644 --- a/keyboards/ploopyco/trackball/info.json +++ b/keyboards/ploopyco/trackball/info.json @@ -2,7 +2,6 @@ "keyboard_name": "PloopyCo Trackball", "url": "www.ploopy.co", "maintainer": "drashna", - "manufacturer": "Ploopy Corporation", "width": 8, "height": 3, "layouts": { diff --git a/keyboards/qwertyydox/info.json b/keyboards/qwertyydox/info.json index 2a7efc199d6..91c7065f11d 100644 --- a/keyboards/qwertyydox/info.json +++ b/keyboards/qwertyydox/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "QWERTYYdox", - "manufacturer": "aydenvis", "identifier": "0x1256", "url": "", "maintainer": "qmk", diff --git a/keyboards/tkw/stoutgat/v2/info.json b/keyboards/tkw/stoutgat/v2/info.json index 48288096b15..1138af0782d 100644 --- a/keyboards/tkw/stoutgat/v2/info.json +++ b/keyboards/tkw/stoutgat/v2/info.json @@ -2,7 +2,6 @@ "keyboard_name": "stoutgat/v2", "url": "https://github.com/vattern/stoutgatv2", "maintainer": "vattern", - "manufacturer": "tkw", "width": 17.25, "height": 5, "layouts": { diff --git a/keyboards/xd87/info.json b/keyboards/xd87/info.json index 59ec05107e4..8a6b2dd2f0b 100644 --- a/keyboards/xd87/info.json +++ b/keyboards/xd87/info.json @@ -1,6 +1,5 @@ { "keyboard_name": "XD87", - "manufacturer": "KPrepublic", "url": "https://kprepublic.com/products/hot-swappable-xd87-hs-xd87-custom-mechanical-keyboard-kit80-supports-tkg-tools-support-underglow-rgb-pcb-programmed-gh80-kle", "maintainer": "qmk", "width": 18.25, From ab375d3d075c105f09a1ddd0e155f178225518bc Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Fri, 15 Jan 2021 06:55:07 +1100 Subject: [PATCH 065/145] Revert "Keep track of last matrix activity (#10730)" This reverts commit 79d1db332477963555416d9fff82ecac4399bd52. --- quantum/split_common/matrix.c | 29 +++++++++-------------------- tmk_core/common/keyboard.c | 13 ++++++------- tmk_core/common/keyboard.h | 3 --- 3 files changed, 15 insertions(+), 30 deletions(-) diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index 067815c9914..22ff89bfc6e 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -251,59 +251,48 @@ void matrix_init(void) { split_post_init(); } -bool matrix_post_scan(void) { - bool changed = false; +void matrix_post_scan(void) { if (is_keyboard_master()) { static uint8_t error_count; - matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; - if (!transport_master(slave_matrix)) { + if (!transport_master(matrix + thatHand)) { error_count++; if (error_count > ERROR_DISCONNECT_COUNT) { // reset other half if disconnected for (int i = 0; i < ROWS_PER_HAND; ++i) { - slave_matrix[i] = 0; + matrix[thatHand + i] = 0; } } } else { error_count = 0; } - for (int i = 0; i < ROWS_PER_HAND; ++i) { - if (matrix[thatHand + i] != slave_matrix[i]) { - matrix[thatHand + i] = slave_matrix[i]; - changed = true; - } - } - matrix_scan_quantum(); } else { transport_slave(matrix + thisHand); matrix_slave_scan_user(); } - - return changed; } uint8_t matrix_scan(void) { - bool local_changed = false; + bool changed = false; #if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - local_changed |= read_cols_on_row(raw_matrix, current_row); + changed |= read_cols_on_row(raw_matrix, current_row); } #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - local_changed |= read_rows_on_col(raw_matrix, current_col); + changed |= read_rows_on_col(raw_matrix, current_col); } #endif - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, local_changed); + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - bool remote_changed = matrix_post_scan(); - return (uint8_t)(local_changed || remote_changed); + matrix_post_scan(); + return (uint8_t)changed; } diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index aea09169fb2..a1fbc01da67 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -97,10 +97,6 @@ along with this program. If not, see . # include "dip_switch.h" #endif -static uint32_t last_matrix_modification_time = 0; -uint32_t last_matrix_activity_time(void) { return last_matrix_modification_time; } -uint32_t last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); } - // Only enable this if console is enabled to print to #if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE) static uint32_t matrix_timer = 0; @@ -342,8 +338,11 @@ void keyboard_task(void) { housekeeping_task_kb(); housekeeping_task_user(); - uint8_t matrix_changed = matrix_scan(); - if (matrix_changed) last_matrix_modification_time = timer_read32(); +#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) + uint8_t ret = matrix_scan(); +#else + matrix_scan(); +#endif if (should_process_keypress()) { for (uint8_t r = 0; r < MATRIX_ROWS; r++) { @@ -410,7 +409,7 @@ MATRIX_LOOP_END: oled_task(); # ifndef OLED_DISABLE_TIMEOUT // Wake up oled if user is using those fabulous keys! - if (matrix_changed) oled_on(); + if (ret) oled_on(); # endif #endif diff --git a/tmk_core/common/keyboard.h b/tmk_core/common/keyboard.h index cc5b2e5e422..d04e685cdb2 100644 --- a/tmk_core/common/keyboard.h +++ b/tmk_core/common/keyboard.h @@ -73,9 +73,6 @@ void keyboard_post_init_user(void); void housekeeping_task_kb(void); void housekeeping_task_user(void); -uint32_t last_matrix_activity_time(void); // Timestamp of the last matrix activity -uint32_t last_matrix_activity_elapsed(void); // Number of milliseconds since the last matrix activity - #ifdef __cplusplus } #endif From f08a11fad33eb6e659a0a063473ff759f7840f9b Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 18 Jan 2021 00:53:03 +1100 Subject: [PATCH 066/145] ChibiOS conf upgrade for hub20 (#11588) hub20 - 089b49b233c4e9b8ab643c6b338c91f5c3136e32 --- keyboards/hub20/chconf.h | 729 ++------------------------------------ keyboards/hub20/halconf.h | 536 ++-------------------------- keyboards/hub20/mcuconf.h | 186 ++-------- 3 files changed, 72 insertions(+), 1379 deletions(-) diff --git a/keyboards/hub20/chconf.h b/keyboards/hub20/chconf.h index 03f63da36a8..2b80a2f11f2 100644 --- a/keyboards/hub20/chconf.h +++ b/keyboards/hub20/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hub20/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MEMCORE TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/hub20/halconf.h b/keyboards/hub20/halconf.h index adb1a907154..2aa6e645222 100644 --- a/keyboards/hub20/halconf.h +++ b/keyboards/hub20/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hub20/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/hub20/mcuconf.h b/keyboards/hub20/mcuconf.h index 048eb4df650..11c34e37f88 100644 --- a/keyboards/hub20/mcuconf.h +++ b/keyboards/hub20/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/hub20/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From e702c7f1b4cfa8fe1579498ef2877994baa64056 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 18 Jan 2021 05:01:38 +1100 Subject: [PATCH 067/145] Keep track of last matrix activity. (#11552) Co-authored-by: Dasky Co-authored-by: Dasky --- quantum/split_common/matrix.c | 30 ++++++++++++++++++++++-------- tmk_core/common/keyboard.c | 13 +++++++------ tmk_core/common/keyboard.h | 3 +++ 3 files changed, 32 insertions(+), 14 deletions(-) diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index 22ff89bfc6e..631e960ead5 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -251,21 +251,33 @@ void matrix_init(void) { split_post_init(); } -void matrix_post_scan(void) { +bool matrix_post_scan(void) { + bool changed = false; if (is_keyboard_master()) { static uint8_t error_count; - if (!transport_master(matrix + thatHand)) { + matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; + if (!transport_master(slave_matrix)) { error_count++; if (error_count > ERROR_DISCONNECT_COUNT) { // reset other half if disconnected for (int i = 0; i < ROWS_PER_HAND; ++i) { matrix[thatHand + i] = 0; + slave_matrix[i] = 0; } + + changed = true; } } else { error_count = 0; + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + if (matrix[thatHand + i] != slave_matrix[i]) { + matrix[thatHand + i] = slave_matrix[i]; + changed = true; + } + } } matrix_scan_quantum(); @@ -274,25 +286,27 @@ void matrix_post_scan(void) { matrix_slave_scan_user(); } + + return changed; } uint8_t matrix_scan(void) { - bool changed = false; + bool local_changed = false; #if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) // Set row, read cols for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); + local_changed |= read_cols_on_row(raw_matrix, current_row); } #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); + local_changed |= read_rows_on_col(raw_matrix, current_col); } #endif - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, local_changed); - matrix_post_scan(); - return (uint8_t)changed; + bool remote_changed = matrix_post_scan(); + return (uint8_t)(local_changed || remote_changed); } diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index a1fbc01da67..aea09169fb2 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -97,6 +97,10 @@ along with this program. If not, see . # include "dip_switch.h" #endif +static uint32_t last_matrix_modification_time = 0; +uint32_t last_matrix_activity_time(void) { return last_matrix_modification_time; } +uint32_t last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); } + // Only enable this if console is enabled to print to #if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE) static uint32_t matrix_timer = 0; @@ -338,11 +342,8 @@ void keyboard_task(void) { housekeeping_task_kb(); housekeeping_task_user(); -#if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) - uint8_t ret = matrix_scan(); -#else - matrix_scan(); -#endif + uint8_t matrix_changed = matrix_scan(); + if (matrix_changed) last_matrix_modification_time = timer_read32(); if (should_process_keypress()) { for (uint8_t r = 0; r < MATRIX_ROWS; r++) { @@ -409,7 +410,7 @@ MATRIX_LOOP_END: oled_task(); # ifndef OLED_DISABLE_TIMEOUT // Wake up oled if user is using those fabulous keys! - if (ret) oled_on(); + if (matrix_changed) oled_on(); # endif #endif diff --git a/tmk_core/common/keyboard.h b/tmk_core/common/keyboard.h index d04e685cdb2..cc5b2e5e422 100644 --- a/tmk_core/common/keyboard.h +++ b/tmk_core/common/keyboard.h @@ -73,6 +73,9 @@ void keyboard_post_init_user(void); void housekeeping_task_kb(void); void housekeeping_task_user(void); +uint32_t last_matrix_activity_time(void); // Timestamp of the last matrix activity +uint32_t last_matrix_activity_elapsed(void); // Number of milliseconds since the last matrix activity + #ifdef __cplusplus } #endif From 31c57aab35e6fd49c4c8336f449419afe7630e93 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 18 Jan 2021 05:12:15 +1100 Subject: [PATCH 068/145] `qmk cformat` --- quantum/quantum.c | 8 +-- quantum/quantum.h | 4 +- quantum/rgblight.c | 2 +- quantum/split_common/matrix.c | 2 +- quantum/split_common/transport.c | 26 +++++----- tmk_core/common/avr/bootloader.c | 8 +-- tmk_core/common/mousekey.c | 32 +++++------- tmk_core/common/mousekey.h | 78 ++++++++++++++-------------- tmk_core/common/wait.h | 89 +++++++++++++++++++++----------- 9 files changed, 136 insertions(+), 113 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index ece0388d32c..8db801f1954 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -551,10 +551,10 @@ void send_char(char ascii_code) { } #endif - uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); - bool is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code); - bool is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code); - bool is_dead = PGM_LOADBIT(ascii_to_dead_lut, (uint8_t)ascii_code); + uint8_t keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]); + bool is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code); + bool is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code); + bool is_dead = PGM_LOADBIT(ascii_to_dead_lut, (uint8_t)ascii_code); if (is_shifted) { register_code(KC_LSFT); diff --git a/quantum/quantum.h b/quantum/quantum.h index d234e6ea0dc..370a65fe044 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -248,9 +248,9 @@ typedef ioline_t pin_t; */ # if !defined(GPIO_INPUT_PIN_DELAY) # if defined(STM32_SYSCLK) -# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK/1000000L / 4) +# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK / 1000000L / 4) # elif defined(KINETIS_SYSCLK_FREQUENCY) -# define GPIO_INPUT_PIN_DELAY (KINETIS_SYSCLK_FREQUENCY/1000000L / 4) +# define GPIO_INPUT_PIN_DELAY (KINETIS_SYSCLK_FREQUENCY / 1000000L / 4) # endif # endif # define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY) diff --git a/quantum/rgblight.c b/quantum/rgblight.c index b16c3e7c26a..44e9eade539 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -843,7 +843,7 @@ void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) { animation_status.restart = true; } # endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */ -# endif /* RGBLIGHT_USE_TIMER */ +# endif /* RGBLIGHT_USE_TIMER */ } #endif /* RGBLIGHT_SPLIT */ diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index 631e960ead5..bad762b4935 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -264,7 +264,7 @@ bool matrix_post_scan(void) { // reset other half if disconnected for (int i = 0; i < ROWS_PER_HAND; ++i) { matrix[thatHand + i] = 0; - slave_matrix[i] = 0; + slave_matrix[i] = 0; } changed = true; diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index e601fb4df5a..b45ba92c3b6 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -40,7 +40,7 @@ typedef struct _I2C_slave_buffer_t { # endif # endif # ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; + uint8_t backlight_level; # endif # if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) rgblight_syncinfo_t rgblight_sync; @@ -172,9 +172,9 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef SPLIT_MODS_ENABLE set_mods(i2c_buffer->real_mods); set_weak_mods(i2c_buffer->weak_mods); -# ifndef NO_ACTION_ONESHOT +# ifndef NO_ACTION_ONESHOT set_oneshot_mods(i2c_buffer->oneshot_mods); -# endif +# endif # endif } @@ -191,27 +191,27 @@ typedef struct _Serial_s2m_buffer_t { matrix_row_t smatrix[ROWS_PER_HAND]; # ifdef ENCODER_ENABLE - uint8_t encoder_state[NUMBER_OF_ENCODERS]; + uint8_t encoder_state[NUMBER_OF_ENCODERS]; # endif } Serial_s2m_buffer_t; typedef struct _Serial_m2s_buffer_t { # ifdef SPLIT_MODS_ENABLE - uint8_t real_mods; - uint8_t weak_mods; + uint8_t real_mods; + uint8_t weak_mods; # ifndef NO_ACTION_ONESHOT - uint8_t oneshot_mods; + uint8_t oneshot_mods; # endif # endif # ifndef DISABLE_SYNC_TIMER uint32_t sync_timer; # endif # ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; + uint8_t backlight_level; # endif # ifdef WPM_ENABLE - uint8_t current_wpm; + uint8_t current_wpm; # endif } Serial_m2s_buffer_t; @@ -317,18 +317,18 @@ bool transport_master(matrix_row_t matrix[]) { # ifdef WPM_ENABLE // Write wpm to slave - serial_m2s_buffer.current_wpm = get_current_wpm(); + serial_m2s_buffer.current_wpm = get_current_wpm(); # endif # ifdef SPLIT_MODS_ENABLE - serial_m2s_buffer.real_mods = get_mods(); - serial_m2s_buffer.weak_mods = get_weak_mods(); + serial_m2s_buffer.real_mods = get_mods(); + serial_m2s_buffer.weak_mods = get_weak_mods(); # ifndef NO_ACTION_ONESHOT serial_m2s_buffer.oneshot_mods = get_oneshot_mods(); # endif # endif # ifndef DISABLE_SYNC_TIMER - serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; + serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET; # endif return true; } diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index c0272903b83..4e3a27022dc 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -237,13 +237,13 @@ __attribute__((weak)) void bootloader_jump(void) { "bootloader_startup_loop%=: \n\t" "rjmp bootloader_startup_loop%= \n\t" : - : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), + : [ mcucsrio ] "I"(_SFR_IO_ADDR(MCUCSR)), # if (FLASHEND > 131071) - [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), + [ ramendhi ] "M"(((RAMEND - 2) >> 8) & 0xff), [ ramendlo ] "M"(((RAMEND - 2) >> 0) & 0xff), [ bootaddrhi ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), # else - [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), + [ ramendhi ] "M"(((RAMEND - 1) >> 8) & 0xff), [ ramendlo ] "M"(((RAMEND - 1) >> 0) & 0xff), # endif - [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); + [ bootaddrme ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [ bootaddrlo ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); #else // Assume remaining boards are DFU, even if the flag isn't set diff --git a/tmk_core/common/mousekey.c b/tmk_core/common/mousekey.c index 697e0692c01..6c9df67236f 100644 --- a/tmk_core/common/mousekey.c +++ b/tmk_core/common/mousekey.c @@ -37,7 +37,7 @@ static uint8_t mousekey_accel = 0; static uint8_t mousekey_repeat = 0; static uint8_t mousekey_wheel_repeat = 0; #ifdef MK_KINETIC_SPEED -static uint16_t mouse_timer = 0; +static uint16_t mouse_timer = 0; #endif #ifndef MK_3_SPEED @@ -123,20 +123,18 @@ static uint8_t wheel_unit(void) { * B: base mouse travel speed */ const uint16_t mk_accelerated_speed = MOUSEKEY_ACCELERATED_SPEED; -const uint16_t mk_base_speed = MOUSEKEY_BASE_SPEED; +const uint16_t mk_base_speed = MOUSEKEY_BASE_SPEED; const uint16_t mk_decelerated_speed = MOUSEKEY_DECELERATED_SPEED; -const uint16_t mk_initial_speed = MOUSEKEY_INITIAL_SPEED; +const uint16_t mk_initial_speed = MOUSEKEY_INITIAL_SPEED; static uint8_t move_unit(void) { float speed = mk_initial_speed; - if (mousekey_accel & ((1<<0) | (1<<2))) { - speed = mousekey_accel & (1<<2) ? mk_accelerated_speed : mk_decelerated_speed; + if (mousekey_accel & ((1 << 0) | (1 << 2))) { + speed = mousekey_accel & (1 << 2) ? mk_accelerated_speed : mk_decelerated_speed; } else if (mousekey_repeat && mouse_timer) { const float time_elapsed = timer_elapsed(mouse_timer) / 50; - speed = mk_initial_speed + - MOUSEKEY_MOVE_DELTA * time_elapsed + - MOUSEKEY_MOVE_DELTA * 0.5 * time_elapsed * time_elapsed; + speed = mk_initial_speed + MOUSEKEY_MOVE_DELTA * time_elapsed + MOUSEKEY_MOVE_DELTA * 0.5 * time_elapsed * time_elapsed; speed = speed > mk_base_speed ? mk_base_speed : speed; } @@ -153,14 +151,12 @@ float mk_wheel_interval = 1000.0f / MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; static uint8_t wheel_unit(void) { float speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS; - if (mousekey_accel & ((1<<0) | (1<<2))) { - speed = mousekey_accel & (1<<2) ? MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS : MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS; + if (mousekey_accel & ((1 << 0) | (1 << 2))) { + speed = mousekey_accel & (1 << 2) ? MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS : MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS; } else if (mousekey_repeat && mouse_timer) { if (mk_wheel_interval != MOUSEKEY_WHEEL_BASE_MOVEMENTS) { const float time_elapsed = timer_elapsed(mouse_timer) / 50; - speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS + - 1 * time_elapsed + - 1 * 0.5 * time_elapsed * time_elapsed; + speed = MOUSEKEY_WHEEL_INITIAL_MOVEMENTS + 1 * time_elapsed + 1 * 0.5 * time_elapsed * time_elapsed; } speed = speed > MOUSEKEY_WHEEL_BASE_MOVEMENTS ? MOUSEKEY_WHEEL_BASE_MOVEMENTS : speed; } @@ -209,7 +205,7 @@ static uint8_t wheel_unit(void) { } # endif /* #ifndef MK_KINETIC_SPEED */ -# endif /* #ifndef MK_COMBINED */ +# endif /* #ifndef MK_COMBINED */ void mousekey_task(void) { // report cursor and scroll movement independently @@ -260,11 +256,11 @@ void mousekey_task(void) { } void mousekey_on(uint8_t code) { -#ifdef MK_KINETIC_SPEED +# ifdef MK_KINETIC_SPEED if (mouse_timer == 0) { mouse_timer = timer_read(); } -#endif /* #ifdef MK_KINETIC_SPEED */ +# endif /* #ifdef MK_KINETIC_SPEED */ if (code == KC_MS_UP) mouse_report.y = move_unit() * -1; @@ -335,9 +331,9 @@ void mousekey_off(uint8_t code) { mousekey_accel &= ~(1 << 2); if (mouse_report.x == 0 && mouse_report.y == 0) { mousekey_repeat = 0; -#ifdef MK_KINETIC_SPEED +# ifdef MK_KINETIC_SPEED mouse_timer = 0; -#endif /* #ifdef MK_KINETIC_SPEED */ +# endif /* #ifdef MK_KINETIC_SPEED */ } if (mouse_report.v == 0 && mouse_report.h == 0) mousekey_wheel_repeat = 0; } diff --git a/tmk_core/common/mousekey.h b/tmk_core/common/mousekey.h index 911d11eeb99..52b8fe10e11 100644 --- a/tmk_core/common/mousekey.h +++ b/tmk_core/common/mousekey.h @@ -36,28 +36,28 @@ along with this program. If not, see . # endif # ifndef MOUSEKEY_MOVE_DELTA -#ifndef MK_KINETIC_SPEED -# define MOUSEKEY_MOVE_DELTA 5 -#else -# define MOUSEKEY_MOVE_DELTA 25 -#endif +# ifndef MK_KINETIC_SPEED +# define MOUSEKEY_MOVE_DELTA 5 +# else +# define MOUSEKEY_MOVE_DELTA 25 +# endif # endif # ifndef MOUSEKEY_WHEEL_DELTA # define MOUSEKEY_WHEEL_DELTA 1 # endif # ifndef MOUSEKEY_DELAY -#ifndef MK_KINETIC_SPEED -# define MOUSEKEY_DELAY 300 -#else -# define MOUSEKEY_DELAY 8 -#endif +# ifndef MK_KINETIC_SPEED +# define MOUSEKEY_DELAY 300 +# else +# define MOUSEKEY_DELAY 8 +# endif # endif # ifndef MOUSEKEY_INTERVAL -#ifndef MK_KINETIC_SPEED -# define MOUSEKEY_INTERVAL 50 -#else -# define MOUSEKEY_INTERVAL 8 -#endif +# ifndef MK_KINETIC_SPEED +# define MOUSEKEY_INTERVAL 50 +# else +# define MOUSEKEY_INTERVAL 8 +# endif # endif # ifndef MOUSEKEY_MAX_SPEED # define MOUSEKEY_MAX_SPEED 10 @@ -78,30 +78,30 @@ along with this program. If not, see . # define MOUSEKEY_WHEEL_TIME_TO_MAX 40 # endif -#ifndef MOUSEKEY_INITIAL_SPEED -#define MOUSEKEY_INITIAL_SPEED 100 -#endif -#ifndef MOUSEKEY_BASE_SPEED -#define MOUSEKEY_BASE_SPEED 1000 -#endif -#ifndef MOUSEKEY_DECELERATED_SPEED -#define MOUSEKEY_DECELERATED_SPEED 400 -#endif -#ifndef MOUSEKEY_ACCELERATED_SPEED -#define MOUSEKEY_ACCELERATED_SPEED 3000 -#endif -#ifndef MOUSEKEY_WHEEL_INITIAL_MOVEMENTS -#define MOUSEKEY_WHEEL_INITIAL_MOVEMENTS 16 -#endif -#ifndef MOUSEKEY_WHEEL_BASE_MOVEMENTS -#define MOUSEKEY_WHEEL_BASE_MOVEMENTS 32 -#endif -#ifndef MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS -#define MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS 48 -#endif -#ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS -#define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8 -#endif +# ifndef MOUSEKEY_INITIAL_SPEED +# define MOUSEKEY_INITIAL_SPEED 100 +# endif +# ifndef MOUSEKEY_BASE_SPEED +# define MOUSEKEY_BASE_SPEED 1000 +# endif +# ifndef MOUSEKEY_DECELERATED_SPEED +# define MOUSEKEY_DECELERATED_SPEED 400 +# endif +# ifndef MOUSEKEY_ACCELERATED_SPEED +# define MOUSEKEY_ACCELERATED_SPEED 3000 +# endif +# ifndef MOUSEKEY_WHEEL_INITIAL_MOVEMENTS +# define MOUSEKEY_WHEEL_INITIAL_MOVEMENTS 16 +# endif +# ifndef MOUSEKEY_WHEEL_BASE_MOVEMENTS +# define MOUSEKEY_WHEEL_BASE_MOVEMENTS 32 +# endif +# ifndef MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS +# define MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS 48 +# endif +# ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS +# define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8 +# endif #else /* #ifndef MK_3_SPEED */ diff --git a/tmk_core/common/wait.h b/tmk_core/common/wait.h index 0b3fd755a96..28224fe3aa9 100644 --- a/tmk_core/common/wait.h +++ b/tmk_core/common/wait.h @@ -15,44 +15,71 @@ extern "C" { # define CLOCK_DELAY_NOP8 "nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t nop\n\t" -__attribute__((always_inline)) -static inline void wait_cpuclock_allnop(unsigned int n) { /* n: 1..135 */ +__attribute__((always_inline)) static inline void wait_cpuclock_allnop(unsigned int n) { /* n: 1..135 */ /* The argument n must be a constant expression. * That way, compiler optimization will remove unnecessary code. */ - if (n < 1) { return; } + if (n < 1) { + return; + } if (n > 8) { - unsigned int n8 = n/8; - n = n - n8*8; + unsigned int n8 = n / 8; + n = n - n8 * 8; switch (n8) { - case 16: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 15: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 14: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 13: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 12: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 11: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 10: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 9: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 8: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 7: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 6: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 5: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 4: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 3: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 2: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 1: asm volatile (CLOCK_DELAY_NOP8::: "memory"); - case 0: break; + case 16: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 15: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 14: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 13: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 12: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 11: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 10: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 9: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 8: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 7: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 6: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 5: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 4: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 3: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 2: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 1: + asm volatile(CLOCK_DELAY_NOP8::: "memory"); + case 0: + break; } } switch (n) { - case 8: asm volatile ("nop"::: "memory"); - case 7: asm volatile ("nop"::: "memory"); - case 6: asm volatile ("nop"::: "memory"); - case 5: asm volatile ("nop"::: "memory"); - case 4: asm volatile ("nop"::: "memory"); - case 3: asm volatile ("nop"::: "memory"); - case 2: asm volatile ("nop"::: "memory"); - case 1: asm volatile ("nop"::: "memory"); - case 0: break; + case 8: + asm volatile("nop" ::: "memory"); + case 7: + asm volatile("nop" ::: "memory"); + case 6: + asm volatile("nop" ::: "memory"); + case 5: + asm volatile("nop" ::: "memory"); + case 4: + asm volatile("nop" ::: "memory"); + case 3: + asm volatile("nop" ::: "memory"); + case 2: + asm volatile("nop" ::: "memory"); + case 1: + asm volatile("nop" ::: "memory"); + case 0: + break; } } #endif From e0e67df933edd2b5740a19b49cf88084492c964c Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 18 Jan 2021 13:16:59 +1100 Subject: [PATCH 069/145] ChibiOS conf migrations... take 9 (#11598) * ChibiOS conf upgrade for akegata_denki/device_one akegata_denki/device_one - 0d9f891416decbbb533c6c1147632ef7c55a2d9f * ChibiOS conf upgrade for ergodox_stm32 ergodox_stm32 - 72aeab1612ef73555a73dd60d005e671a90d7e2f * ChibiOS conf upgrade for jm60 jm60 - cc75e97727fadd939be4bdf7fa3714320465d3ef * ChibiOS conf upgrade for matrix/m20add matrix/m20add - b0dee0b4e8c0a94d55fea51c8699972f15483209 * ChibiOS conf upgrade for matrix/noah matrix/noah - 57a1c09cd24716863ce862e0b9cbca2a9c6fcebf * ChibiOS conf upgrade for nibiria/stream15 nibiria/stream15 - 610b151b02f5cac681c65fbd3f94a12312f99b82 * ChibiOS conf upgrade for xiaomi/mk02 xiaomi/mk02 - f92fcee777acc159c0af268e88b751fd1e33f74f --- keyboards/akegata_denki/device_one/chconf.h | 726 +----------------- keyboards/akegata_denki/device_one/halconf.h | 536 +------------- keyboards/ergodox_stm32/chconf.h | 729 +------------------ keyboards/ergodox_stm32/halconf.h | 536 +------------- keyboards/jm60/chconf.h | 729 +------------------ keyboards/jm60/halconf.h | 525 ------------- keyboards/matrix/m20add/chconf.h | 729 +------------------ keyboards/matrix/m20add/halconf.h | 536 +------------- keyboards/matrix/noah/chconf.h | 729 +------------------ keyboards/matrix/noah/halconf.h | 536 +------------- keyboards/nibiria/stream15/chconf.h | 729 +------------------ keyboards/nibiria/stream15/halconf.h | 536 +------------- keyboards/nibiria/stream15/mcuconf.h | 186 +---- keyboards/xiaomi/mk02/chconf.h | 729 +------------------ keyboards/xiaomi/mk02/halconf.h | 536 +------------- 15 files changed, 415 insertions(+), 8612 deletions(-) delete mode 100644 keyboards/jm60/halconf.h diff --git a/keyboards/akegata_denki/device_one/chconf.h b/keyboards/akegata_denki/device_one/chconf.h index c618ebe1208..75a582ab6a3 100644 --- a/keyboards/akegata_denki/device_one/chconf.h +++ b/keyboards/akegata_denki/device_one/chconf.h @@ -1,711 +1,63 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/akegata_denki/device_one/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ +#pragma once -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** @} */ +#define CH_CFG_USE_MEMCORE TRUE -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_USE_HEAP TRUE -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif +#define CH_CFG_USE_MEMPOOLS TRUE -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif +#define CH_CFG_USE_OBJ_FIFOS TRUE -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_DYNAMIC TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#define CH_CFG_USE_FACTORY TRUE -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/akegata_denki/device_one/halconf.h b/keyboards/akegata_denki/device_one/halconf.h index 25f3fe5edf0..af54607a9d9 100644 --- a/keyboards/akegata_denki/device_one/halconf.h +++ b/keyboards/akegata_denki/device_one/halconf.h @@ -1,525 +1,37 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/akegata_denki/device_one/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_SERIAL_USB TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define ADC_USE_WAIT FALSE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define ADC_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif +#define SPI_USE_WAIT FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif +#include_next -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT FALSE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/ergodox_stm32/chconf.h b/keyboards/ergodox_stm32/chconf.h index 7f767b6ddc7..2f43ed7b08c 100644 --- a/keyboards/ergodox_stm32/chconf.h +++ b/keyboards/ergodox_stm32/chconf.h @@ -1,714 +1,65 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ergodox_stm32/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif -/** @} */ +#pragma once -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#define CH_CFG_USE_HEAP TRUE -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_USE_MEMPOOLS TRUE -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_USE_OBJ_FIFOS TRUE -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_DYNAMIC TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/ergodox_stm32/halconf.h b/keyboards/ergodox_stm32/halconf.h index de0f29ce6ed..ceff43b19dc 100644 --- a/keyboards/ergodox_stm32/halconf.h +++ b/keyboards/ergodox_stm32/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/ergodox_stm32/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/jm60/chconf.h b/keyboards/jm60/chconf.h index 7f767b6ddc7..e3c3407fdaf 100644 --- a/keyboards/jm60/chconf.h +++ b/keyboards/jm60/chconf.h @@ -1,714 +1,65 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/jm60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif -/** @} */ +#pragma once -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif +#define CH_CFG_TIME_QUANTUM 20 -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#define CH_CFG_USE_HEAP TRUE -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_USE_MEMPOOLS TRUE -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_USE_OBJ_FIFOS TRUE -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_DYNAMIC TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/jm60/halconf.h b/keyboards/jm60/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/jm60/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/matrix/m20add/chconf.h b/keyboards/matrix/m20add/chconf.h index 7dc4f84a8a0..c2cda22459e 100644 --- a/keyboards/matrix/m20add/chconf.h +++ b/keyboards/matrix/m20add/chconf.h @@ -1,714 +1,65 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/matrix/m20add/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif -/** @} */ +#pragma once -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_TM TRUE -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#define CH_CFG_USE_HEAP TRUE -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_USE_MEMPOOLS TRUE -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_USE_OBJ_FIFOS TRUE -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_DYNAMIC TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/matrix/m20add/halconf.h b/keyboards/matrix/m20add/halconf.h index dca1abbaf87..f6da992dea8 100644 --- a/keyboards/matrix/m20add/halconf.h +++ b/keyboards/matrix/m20add/halconf.h @@ -1,525 +1,35 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/matrix/m20add/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_RTC TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif +#include_next -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h index 7dc4f84a8a0..08f35b6974c 100644 --- a/keyboards/matrix/noah/chconf.h +++ b/keyboards/matrix/noah/chconf.h @@ -1,714 +1,65 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/matrix/noah/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif -/** @} */ +#pragma once -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_TM TRUE -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif +#define CH_CFG_USE_HEAP TRUE -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif +#define CH_CFG_USE_MEMPOOLS TRUE -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif +#define CH_CFG_USE_OBJ_FIFOS TRUE -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif +#define CH_CFG_USE_DYNAMIC TRUE -/** @} */ +#define CH_CFG_USE_FACTORY TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/matrix/noah/halconf.h b/keyboards/matrix/noah/halconf.h index 34501edfd1d..95de64d898a 100644 --- a/keyboards/matrix/noah/halconf.h +++ b/keyboards/matrix/noah/halconf.h @@ -1,525 +1,33 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/matrix/noah/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#define SPI_USE_MUTUAL_EXCLUSION FALSE -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif +#include_next -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nibiria/stream15/chconf.h b/keyboards/nibiria/stream15/chconf.h index 03f63da36a8..8d5a6b1ce36 100644 --- a/keyboards/nibiria/stream15/chconf.h +++ b/keyboards/nibiria/stream15/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nibiria/stream15/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MEMCORE TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/nibiria/stream15/halconf.h b/keyboards/nibiria/stream15/halconf.h index adb1a907154..e2d85aeccbb 100644 --- a/keyboards/nibiria/stream15/halconf.h +++ b/keyboards/nibiria/stream15/halconf.h @@ -1,525 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nibiria/stream15/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_I2C TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif +#include_next -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/nibiria/stream15/mcuconf.h b/keyboards/nibiria/stream15/mcuconf.h index 25f2fb2ed40..d6d7289fc78 100644 --- a/keyboards/nibiria/stream15/mcuconf.h +++ b/keyboards/nibiria/stream15/mcuconf.h @@ -1,176 +1,34 @@ -/* - ChibiOS - Copyright (C) 2021 Matt Clendaniel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/nibiria/stream15/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/xiaomi/mk02/chconf.h b/keyboards/xiaomi/mk02/chconf.h index 85c1c9b3b9e..9e4ca77e075 100644 --- a/keyboards/xiaomi/mk02/chconf.h +++ b/keyboards/xiaomi/mk02/chconf.h @@ -1,714 +1,57 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xiaomi/mk02/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif +#pragma once -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif +#define CH_CFG_USE_MESSAGES TRUE -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif +#define CH_CFG_USE_MAILBOXES TRUE -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_MEMCORE TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif +#define CH_CFG_USE_PIPES TRUE -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#define CH_CFG_FACTORY_SEMAPHORES TRUE -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_FACTORY_MAILBOXES TRUE -/** @} */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_FACTORY_PIPES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/xiaomi/mk02/halconf.h b/keyboards/xiaomi/mk02/halconf.h index 921803762ea..2f56db7c315 100644 --- a/keyboards/xiaomi/mk02/halconf.h +++ b/keyboards/xiaomi/mk02/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confupdate -i keyboards/xiaomi/mk02/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ From 94746b6557bfcc530d4519a48de30bdd5eff5587 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 19 Jan 2021 12:18:57 +1100 Subject: [PATCH 070/145] Fixup builds on develop branch. (#11600) --- keyboards/ebastler/isometria_75/rev1/chconf.h | 3 --- keyboards/ebastler/isometria_75/rev1/halconf.h | 5 +---- keyboards/hp69/rules.mk | 1 + 3 files changed, 2 insertions(+), 7 deletions(-) diff --git a/keyboards/ebastler/isometria_75/rev1/chconf.h b/keyboards/ebastler/isometria_75/rev1/chconf.h index 18a96571091..58a9736f127 100644 --- a/keyboards/ebastler/isometria_75/rev1/chconf.h +++ b/keyboards/ebastler/isometria_75/rev1/chconf.h @@ -19,7 +19,4 @@ #define CH_CFG_ST_RESOLUTION 16 #define CH_CFG_INTERVALS_SIZE 16 -/* no clue, wouldn't compile without */ -#define CH_CFG_USE_TM FALSE - #include_next diff --git a/keyboards/ebastler/isometria_75/rev1/halconf.h b/keyboards/ebastler/isometria_75/rev1/halconf.h index 5487e544008..463f9accbfd 100644 --- a/keyboards/ebastler/isometria_75/rev1/halconf.h +++ b/keyboards/ebastler/isometria_75/rev1/halconf.h @@ -15,9 +15,6 @@ */ #pragma once -/* no clue, wouldn't compile without */ -#define HAL_USE_DAC FALSE -#define HAL_USE_GPT FALSE -#define HAL_USE_I2C FALSE +#define HAL_USE_PWM TRUE #include_next \ No newline at end of file diff --git a/keyboards/hp69/rules.mk b/keyboards/hp69/rules.mk index 22eb0fcd93b..96ad29a6f23 100644 --- a/keyboards/hp69/rules.mk +++ b/keyboards/hp69/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Bootloader selection BOOTLOADER = atmel-dfu From d85b27bbbc6b086db469570cf741b515695dd816 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 20 Jan 2021 00:23:07 +1100 Subject: [PATCH 071/145] Leftover early initialisation conversions (#11615) * jm60 * ergodox_stm32 * F042 bootloader jumps. * xiaomi/mk02 custom bootloader, no early-init bootloader jump for F072. * matrix/m20add, matrix/noah --- keyboards/chavdai40/rev1/config.h | 4 +++- keyboards/chavdai40/rev2/config.h | 4 +++- keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c | 2 -- keyboards/ergodox_stm32/ergodox_stm32.c | 4 ++++ keyboards/jm60/boards/JM60_BOARD/board.c | 2 -- keyboards/jm60/jm60.c | 4 ++++ keyboards/matrix/m20add/boards/m20add_bd/board.c | 2 -- keyboards/matrix/m20add/config.h | 4 ++-- keyboards/matrix/noah/boards/noah_bd/board.c | 2 -- keyboards/matrix/noah/config.h | 2 ++ keyboards/polilla/rev1/config.h | 2 ++ keyboards/xiaomi/mk02/config.h | 2 ++ platforms/chibios/GENERIC_STM32_F042X6/board/board.c | 4 ---- 13 files changed, 22 insertions(+), 16 deletions(-) diff --git a/keyboards/chavdai40/rev1/config.h b/keyboards/chavdai40/rev1/config.h index a3dcf84e9a6..5ce1111bae5 100644 --- a/keyboards/chavdai40/rev1/config.h +++ b/keyboards/chavdai40/rev1/config.h @@ -19,6 +19,8 @@ #include "config_common.h" +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE + /* USB Device descriptor parameter */ #define VENDOR_ID 0x16D0 #define PRODUCT_ID 0x0F95 @@ -33,7 +35,7 @@ #define MATRIX_ROWS 4 #define MATRIX_COLS 13 - + #define MATRIX_ROW_PINS { A0, A15, B5, B6 } #define MATRIX_COL_PINS { B8, B4, B3, B2, B1, B0, A7, A6, A5, A4, A3, A2, A1 } #define UNUSED_PINS diff --git a/keyboards/chavdai40/rev2/config.h b/keyboards/chavdai40/rev2/config.h index a95f025f420..e45d2b2db12 100644 --- a/keyboards/chavdai40/rev2/config.h +++ b/keyboards/chavdai40/rev2/config.h @@ -19,6 +19,8 @@ #include "config_common.h" +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE + /* USB Device descriptor parameter */ #define VENDOR_ID 0x16D0 #define PRODUCT_ID 0x0F95 @@ -33,7 +35,7 @@ #define MATRIX_ROWS 4 #define MATRIX_COLS 13 - + #define MATRIX_ROW_PINS { A0, A15, B5, B6 } #define MATRIX_COL_PINS { B7, B4, B3, A8, B1, B0, A7, A6, A5, A4, A3, A2, A1 } #define UNUSED_PINS diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c index 48844e34a6a..41a603b9517 100644 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c +++ b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c @@ -46,6 +46,4 @@ void __early_init(void) { * Board-specific initialization code. */ void boardInit(void) { - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - } diff --git a/keyboards/ergodox_stm32/ergodox_stm32.c b/keyboards/ergodox_stm32/ergodox_stm32.c index 176fb3f43ad..846c29d7a4b 100644 --- a/keyboards/ergodox_stm32/ergodox_stm32.c +++ b/keyboards/ergodox_stm32/ergodox_stm32.c @@ -12,6 +12,10 @@ extern inline void ergodox_led_all_off(void); volatile int mcp23017_status = 0x20; uint8_t i2c_initializied = 0; +void board_init(void) { + AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; +} + void matrix_init_kb(void) { // Init LED Ports diff --git a/keyboards/jm60/boards/JM60_BOARD/board.c b/keyboards/jm60/boards/JM60_BOARD/board.c index 48844e34a6a..41a603b9517 100644 --- a/keyboards/jm60/boards/JM60_BOARD/board.c +++ b/keyboards/jm60/boards/JM60_BOARD/board.c @@ -46,6 +46,4 @@ void __early_init(void) { * Board-specific initialization code. */ void boardInit(void) { - AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; - } diff --git a/keyboards/jm60/jm60.c b/keyboards/jm60/jm60.c index d8fe9cecc11..f7b434f30e0 100644 --- a/keyboards/jm60/jm60.c +++ b/keyboards/jm60/jm60.c @@ -16,3 +16,7 @@ along with this program. If not, see . */ #include "jm60.h" + +void board_init(void) { + AFIO->MAPR |= AFIO_MAPR_SWJ_CFG_JTAGDISABLE; +} diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.c b/keyboards/matrix/m20add/boards/m20add_bd/board.c index 95d9045a0cc..fa5723ec2bd 100644 --- a/keyboards/matrix/m20add/boards/m20add_bd/board.c +++ b/keyboards/matrix/m20add/boards/m20add_bd/board.c @@ -208,8 +208,6 @@ static void stm32_gpio_init(void) { * else. */ void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); stm32_gpio_init(); stm32_clock_init(); diff --git a/keyboards/matrix/m20add/config.h b/keyboards/matrix/m20add/config.h index 31643464951..f404ef9ccd2 100644 --- a/keyboards/matrix/m20add/config.h +++ b/keyboards/matrix/m20add/config.h @@ -5,6 +5,8 @@ #pragma once +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + /* USB Device descriptor parameter */ #define VENDOR_ID 0x4D58 // MX #define PRODUCT_ID 0x20AD // 8XV2.0 Additional @@ -94,5 +96,3 @@ #define DRIVER_ADDR_1 0b1110100 #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL RGBLED_NUM - -#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE // disable jump to system bootloader diff --git a/keyboards/matrix/noah/boards/noah_bd/board.c b/keyboards/matrix/noah/boards/noah_bd/board.c index 95d9045a0cc..fa5723ec2bd 100644 --- a/keyboards/matrix/noah/boards/noah_bd/board.c +++ b/keyboards/matrix/noah/boards/noah_bd/board.c @@ -208,8 +208,6 @@ static void stm32_gpio_init(void) { * else. */ void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); stm32_gpio_init(); stm32_clock_init(); diff --git a/keyboards/matrix/noah/config.h b/keyboards/matrix/noah/config.h index 796e45e2fac..eac752911f9 100644 --- a/keyboards/matrix/noah/config.h +++ b/keyboards/matrix/noah/config.h @@ -5,6 +5,8 @@ #pragma once +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + /* USB Device descriptor parameter */ #define VENDOR_ID 0x4D58 // MX #define PRODUCT_ID 0x0065 // noah 65 diff --git a/keyboards/polilla/rev1/config.h b/keyboards/polilla/rev1/config.h index 66658844654..5f0f10d355d 100644 --- a/keyboards/polilla/rev1/config.h +++ b/keyboards/polilla/rev1/config.h @@ -18,6 +18,8 @@ along with this program. If not, see . #include "config_common.h" +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + /* USB Device descriptor parameter */ #define VENDOR_ID 0x6166 // af #define PRODUCT_ID 0x0010 diff --git a/keyboards/xiaomi/mk02/config.h b/keyboards/xiaomi/mk02/config.h index 785f44097fa..a16d03c4938 100644 --- a/keyboards/xiaomi/mk02/config.h +++ b/keyboards/xiaomi/mk02/config.h @@ -17,6 +17,8 @@ along with this program. If not, see . #pragma once +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE + /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0B91 diff --git a/platforms/chibios/GENERIC_STM32_F042X6/board/board.c b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c index 3c6f54ef5e5..0d7c88756a3 100644 --- a/platforms/chibios/GENERIC_STM32_F042X6/board/board.c +++ b/platforms/chibios/GENERIC_STM32_F042X6/board/board.c @@ -202,16 +202,12 @@ static void stm32_gpio_init(void) { /* Driver exported functions. */ /*===========================================================================*/ -__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {} - /** * @brief Early initialization code. * @details GPIO ports and system clocks are initialized before everything * else. */ void __early_init(void) { - enter_bootloader_mode_if_requested(); - stm32_gpio_init(); stm32_clock_init(); } From 19c180ef88168df25a9f6d680143319c79a3cac0 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 20 Jan 2021 00:35:24 +1100 Subject: [PATCH 072/145] ChibiOS conf migrations... take 10 (#11617) * ChibiOS conf upgrade for akegata_denki/device_one akegata_denki/device_one - 0d9f891416decbbb533c6c1147632ef7c55a2d9f * ChibiOS conf upgrade for chavdai40 chavdai40/rev1 - 06bca6ec34948c8005e73254299488cdba3429f8 chavdai40/rev2 - f55650a8d7aa755eb72564e95a144910dd902a73 * ChibiOS conf upgrade for ergodox_stm32 ergodox_stm32 - 04433b80e4cd231c15163ace77428db72b5483ad * ChibiOS conf upgrade for jm60 jm60 - a127e6cfccad74ed1a9e47e9213dc41cf0d26f1d * ChibiOS conf upgrade for matrix/m20add matrix/m20add - e2e556dad666ed9b1eea09e46d0eb14e19bda8b8 * ChibiOS conf upgrade for matrix/noah matrix/noah - c6fd3caf0b7d444085283d4f0a9204ab283d5202 --- .../device_one/boards/DEVICE_ONE/board.c | 263 ----- .../device_one/boards/DEVICE_ONE/board.h | 950 ------------------ .../device_one/boards/DEVICE_ONE/board.mk | 5 - keyboards/akegata_denki/device_one/rules.mk | 2 +- .../{boards/GENERIC_STM32_F042X6 => }/board.h | 0 .../boards/GENERIC_STM32_F042X6/board.c | 266 ----- .../boards/GENERIC_STM32_F042X6/board.mk | 9 - keyboards/ergodox_stm32/board.h | 37 + .../boards/ERGODOX_STM32_BOARD/board.c | 49 - .../boards/ERGODOX_STM32_BOARD/board.h | 142 --- .../boards/ERGODOX_STM32_BOARD/board.mk | 5 - keyboards/ergodox_stm32/rules.mk | 2 +- keyboards/jm60/board.h | 37 + keyboards/jm60/boards/JM60_BOARD/board.c | 49 - keyboards/jm60/boards/JM60_BOARD/board.h | 142 --- keyboards/jm60/boards/JM60_BOARD/board.mk | 5 - keyboards/jm60/rules.mk | 2 +- .../m20add/{boards/m20add_bd => }/board.h | 0 .../matrix/m20add/boards/m20add_bd/board.c | 266 ----- .../matrix/m20add/boards/m20add_bd/board.mk | 9 - keyboards/matrix/m20add/rules.mk | 2 +- .../matrix/noah/{boards/noah_bd => }/board.h | 0 keyboards/matrix/noah/boards/noah_bd/board.c | 266 ----- keyboards/matrix/noah/boards/noah_bd/board.mk | 9 - keyboards/matrix/noah/rules.mk | 2 +- 25 files changed, 79 insertions(+), 2440 deletions(-) delete mode 100644 keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c delete mode 100644 keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h delete mode 100644 keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk rename keyboards/chavdai40/{boards/GENERIC_STM32_F042X6 => }/board.h (100%) delete mode 100644 keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c delete mode 100644 keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk create mode 100644 keyboards/ergodox_stm32/board.h delete mode 100644 keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c delete mode 100644 keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h delete mode 100644 keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk create mode 100644 keyboards/jm60/board.h delete mode 100644 keyboards/jm60/boards/JM60_BOARD/board.c delete mode 100644 keyboards/jm60/boards/JM60_BOARD/board.h delete mode 100644 keyboards/jm60/boards/JM60_BOARD/board.mk rename keyboards/matrix/m20add/{boards/m20add_bd => }/board.h (100%) delete mode 100644 keyboards/matrix/m20add/boards/m20add_bd/board.c delete mode 100644 keyboards/matrix/m20add/boards/m20add_bd/board.mk rename keyboards/matrix/noah/{boards/noah_bd => }/board.h (100%) delete mode 100644 keyboards/matrix/noah/boards/noah_bd/board.c delete mode 100644 keyboards/matrix/noah/boards/noah_bd/board.mk diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c deleted file mode 100644 index 20b857d006e..00000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h deleted file mode 100644 index 3c4f3f2e82b..00000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h +++ /dev/null @@ -1,950 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#ifndef BOARD_H -#define BOARD_H - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/* - * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_NUCLEO32_F042K6 -#define BOARD_NAME "STMicroelectronics STM32 Nucleo32-F042K6" - -/* - * Board oscillators-related settings. - * NOTE: LSE not fitted. - * NOTE: HSE not fitted. - */ -#if !defined(STM32_LSECLK) -#define STM32_LSECLK 0U -#endif - -#define STM32_LSEDRV (3U << 3U) - -#if !defined(STM32_HSECLK) -#define STM32_HSECLK 0U -#endif - -/* - * MCU type as defined in the ST header. - */ -#define STM32F042x6 - -/* - * IO pins assignments. - */ -#define GPIOA_ARD_A0 0U -#define GPIOA_ARD_A1 1U -#define GPIOA_VCP_TX 2U -#define GPIOA_ARD_A2 3U -#define GPIOA_ARD_A3 4U -#define GPIOA_ARD_A4 5U -#define GPIOA_ARD_A5 6U -#define GPIOA_ARD_A6 7U -#define GPIOA_ARD_D9 8U -#define GPIOA_ARD_D1 9U -#define GPIOA_ARD_D0 10U -#define GPIOA_ARD_D10 11U -#define GPIOA_ARD_D2 12U -#define GPIOA_SWDIO 13U -#define GPIOA_SWCLK 14U -#define GPIOA_VCP_RX 15U - -#define GPIOB_ARD_D3 0U -#define GPIOB_ARD_D6 1U -#define GPIOB_PIN2 2U -#define GPIOB_ARD_D13 3U -#define GPIOB_LED_GREEN 3U -#define GPIOB_ARD_D12 4U -#define GPIOB_ARD_D11 5U -#define GPIOB_ARD_D5 6U -#define GPIOB_ARD_A5_ALT 6U -#define GPIOB_ARD_D4 7U -#define GPIOB_ARD_A4_ALT 7U -#define GPIOB_PIN8 8U -#define GPIOB_PIN9 9U -#define GPIOB_PIN10 10U -#define GPIOB_PIN11 11U -#define GPIOB_PIN12 12U -#define GPIOB_PIN13 13U -#define GPIOB_PIN14 14U -#define GPIOB_PIN15 15U - -#define GPIOC_PIN0 0U -#define GPIOC_PIN1 1U -#define GPIOC_PIN2 2U -#define GPIOC_PIN3 3U -#define GPIOC_PIN4 4U -#define GPIOC_PIN5 5U -#define GPIOC_PIN6 6U -#define GPIOC_PIN7 7U -#define GPIOC_PIN8 8U -#define GPIOC_PIN9 9U -#define GPIOC_PIN10 10U -#define GPIOC_PIN11 11U -#define GPIOC_PIN12 12U -#define GPIOC_PIN13 13U -#define GPIOC_PIN14 14U -#define GPIOC_PIN15 15U - -#define GPIOD_PIN0 0U -#define GPIOD_PIN1 1U -#define GPIOD_PIN2 2U -#define GPIOD_PIN3 3U -#define GPIOD_PIN4 4U -#define GPIOD_PIN5 5U -#define GPIOD_PIN6 6U -#define GPIOD_PIN7 7U -#define GPIOD_PIN8 8U -#define GPIOD_PIN9 9U -#define GPIOD_PIN10 10U -#define GPIOD_PIN11 11U -#define GPIOD_PIN12 12U -#define GPIOD_PIN13 13U -#define GPIOD_PIN14 14U -#define GPIOD_PIN15 15U - -#define GPIOE_PIN0 0U -#define GPIOE_PIN1 1U -#define GPIOE_PIN2 2U -#define GPIOE_PIN3 3U -#define GPIOE_PIN4 4U -#define GPIOE_PIN5 5U -#define GPIOE_PIN6 6U -#define GPIOE_PIN7 7U -#define GPIOE_PIN8 8U -#define GPIOE_PIN9 9U -#define GPIOE_PIN10 10U -#define GPIOE_PIN11 11U -#define GPIOE_PIN12 12U -#define GPIOE_PIN13 13U -#define GPIOE_PIN14 14U -#define GPIOE_PIN15 15U - -#define GPIOF_ARD_D7 0U -#define GPIOF_ARD_D8 1U -#define GPIOF_PIN2 2U -#define GPIOF_PIN3 3U -#define GPIOF_PIN4 4U -#define GPIOF_PIN5 5U -#define GPIOF_PIN6 6U -#define GPIOF_PIN7 7U -#define GPIOF_PIN8 8U -#define GPIOF_PIN9 9U -#define GPIOF_PIN10 10U -#define GPIOF_PIN11 11U -#define GPIOF_PIN12 12U -#define GPIOF_PIN13 13U -#define GPIOF_PIN14 14U -#define GPIOF_PIN15 15U - -/* - * IO lines assignments. - */ -#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) -#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) -#define LINE_VCP_TX PAL_LINE(GPIOA, 2U) -#define LINE_ARD_A2 PAL_LINE(GPIOA, 3U) -#define LINE_ARD_A3 PAL_LINE(GPIOA, 4U) -#define LINE_ARD_A4 PAL_LINE(GPIOA, 5U) -#define LINE_ARD_A5 PAL_LINE(GPIOA, 6U) -#define LINE_ARD_A6 PAL_LINE(GPIOA, 7U) -#define LINE_ARD_D9 PAL_LINE(GPIOA, 8U) -#define LINE_ARD_D1 PAL_LINE(GPIOA, 9U) -#define LINE_ARD_D0 PAL_LINE(GPIOA, 10U) -#define LINE_ARD_D10 PAL_LINE(GPIOA, 11U) -#define LINE_ARD_D2 PAL_LINE(GPIOA, 12U) -#define LINE_SWDIO PAL_LINE(GPIOA, 13U) -#define LINE_SWCLK PAL_LINE(GPIOA, 14U) -#define LINE_VCP_RX PAL_LINE(GPIOA, 15U) -#define LINE_ARD_D3 PAL_LINE(GPIOB, 0U) -#define LINE_ARD_D6 PAL_LINE(GPIOB, 1U) -#define LINE_ARD_D13 PAL_LINE(GPIOB, 3U) -#define LINE_LED_GREEN PAL_LINE(GPIOB, 3U) -#define LINE_ARD_D12 PAL_LINE(GPIOB, 4U) -#define LINE_ARD_D11 PAL_LINE(GPIOB, 5U) -#define LINE_ARD_D5 PAL_LINE(GPIOB, 6U) -#define LINE_ARD_A5_ALT PAL_LINE(GPIOB, 6U) -#define LINE_ARD_D4 PAL_LINE(GPIOB, 7U) -#define LINE_ARD_A4_ALT PAL_LINE(GPIOB, 7U) -#define LINE_ARD_D7 PAL_LINE(GPIOF, 0U) -#define LINE_ARD_D8 PAL_LINE(GPIOF, 1U) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the STM32 Reference Manual for details. - */ -#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) -#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) -#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) -#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) -#define PIN_ODR_LOW(n) (0U << (n)) -#define PIN_ODR_HIGH(n) (1U << (n)) -#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) -#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) -#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) -#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) -#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) -#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) -#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) -#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) -#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) -#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) - -/* - * GPIOA setup: - * - * PA0 - ARD_A0 (input pullup). - * PA1 - ARD_A1 (input pullup). - * PA2 - VCP_TX (alternate 1). - * PA3 - ARD_A2 (input pullup). - * PA4 - ARD_A3 (input pullup). - * PA5 - ARD_A4 (input pullup). - * PA6 - ARD_A5 (input pullup). - * PA7 - ARD_A6 (input pullup). - * PA8 - ARD_D9 (input pullup). - * PA9 - ARD_D1 (input pullup). - * PA10 - ARD_D0 (input pullup). - * PA11 - ARD_D10 (input pullup). - * PA12 - ARD_D2 (input pullup). - * PA13 - SWDIO (alternate 0). - * PA14 - SWCLK (alternate 0). - * PA15 - VCP_RX (alternate 1). - */ -#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \ - PIN_MODE_INPUT(GPIOA_ARD_A1) | \ - PIN_MODE_ALTERNATE(GPIOA_VCP_TX) | \ - PIN_MODE_INPUT(GPIOA_ARD_A2) | \ - PIN_MODE_INPUT(GPIOA_ARD_A3) | \ - PIN_MODE_INPUT(GPIOA_ARD_A4) | \ - PIN_MODE_INPUT(GPIOA_ARD_A5) | \ - PIN_MODE_INPUT(GPIOA_ARD_A6) | \ - PIN_MODE_INPUT(GPIOA_ARD_D9) | \ - PIN_MODE_INPUT(GPIOA_ARD_D1) | \ - PIN_MODE_INPUT(GPIOA_ARD_D0) | \ - PIN_MODE_INPUT(GPIOA_ARD_D10) | \ - PIN_MODE_INPUT(GPIOA_ARD_D2) | \ - PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ - PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ - PIN_MODE_ALTERNATE(GPIOA_VCP_RX)) -#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_VCP_TX) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A3) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A4) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A5) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_A6) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D9) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D10) | \ - PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ - PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ - PIN_OTYPE_PUSHPULL(GPIOA_VCP_RX)) -#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A1) | \ - PIN_OSPEED_LOW(GPIOA_VCP_TX) | \ - PIN_OSPEED_LOW(GPIOA_ARD_A2) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A3) | \ - PIN_OSPEED_LOW(GPIOA_ARD_A4) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A5) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_A6) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D9) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D1) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D0) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D10) | \ - PIN_OSPEED_HIGH(GPIOA_ARD_D2) | \ - PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ - PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ - PIN_OSPEED_HIGH(GPIOA_VCP_RX)) -#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \ - PIN_PUPDR_FLOATING(GPIOA_VCP_TX) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A3) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A4) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A5) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_A6) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D9) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D1) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D0) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D10) | \ - PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | \ - PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ - PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ - PIN_PUPDR_FLOATING(GPIOA_VCP_RX)) -#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | \ - PIN_ODR_HIGH(GPIOA_ARD_A1) | \ - PIN_ODR_HIGH(GPIOA_VCP_TX) | \ - PIN_ODR_HIGH(GPIOA_ARD_A2) | \ - PIN_ODR_HIGH(GPIOA_ARD_A3) | \ - PIN_ODR_LOW(GPIOA_ARD_A4) | \ - PIN_ODR_HIGH(GPIOA_ARD_A5) | \ - PIN_ODR_HIGH(GPIOA_ARD_A6) | \ - PIN_ODR_HIGH(GPIOA_ARD_D9) | \ - PIN_ODR_HIGH(GPIOA_ARD_D1) | \ - PIN_ODR_HIGH(GPIOA_ARD_D0) | \ - PIN_ODR_HIGH(GPIOA_ARD_D10) | \ - PIN_ODR_HIGH(GPIOA_ARD_D2) | \ - PIN_ODR_HIGH(GPIOA_SWDIO) | \ - PIN_ODR_HIGH(GPIOA_SWCLK) | \ - PIN_ODR_HIGH(GPIOA_VCP_RX)) -#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | \ - PIN_AFIO_AF(GPIOA_VCP_TX, 1U) | \ - PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A3, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A4, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A5, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_A6, 0U)) -#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D9, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D1, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D0, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D10, 0U) | \ - PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | \ - PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ - PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ - PIN_AFIO_AF(GPIOA_VCP_RX, 1U)) - -/* - * GPIOB setup: - * - * PB0 - ARD_D3 (input pullup). - * PB1 - ARD_D6 (input pullup). - * PB2 - PIN2 (input pullup). - * PB3 - ARD_D13 LED_GREEN (output pushpull maximum). - * PB4 - ARD_D12 (input pullup). - * PB5 - ARD_D11 (input pullup). - * PB6 - ARD_D5 ARD_A5_ALT (input pullup). - * PB7 - ARD_D4 ARD_A4_ALT (input pullup). - * PB8 - PIN8 (input pullup). - * PB9 - PIN9 (input pullup). - * PB10 - PIN10 (input pullup). - * PB11 - PIN11 (input pullup). - * PB12 - PIN12 (input pullup). - * PB13 - PIN13 (input pullup). - * PB14 - PIN14 (input pullup). - * PB15 - PIN15 (input pullup). - */ -#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_D3) | \ - PIN_MODE_INPUT(GPIOB_ARD_D6) | \ - PIN_MODE_INPUT(GPIOB_PIN2) | \ - PIN_MODE_OUTPUT(GPIOB_ARD_D13) | \ - PIN_MODE_INPUT(GPIOB_ARD_D12) | \ - PIN_MODE_INPUT(GPIOB_ARD_D11) | \ - PIN_MODE_INPUT(GPIOB_ARD_D5) | \ - PIN_MODE_INPUT(GPIOB_ARD_D4) | \ - PIN_MODE_INPUT(GPIOB_PIN8) | \ - PIN_MODE_INPUT(GPIOB_PIN9) | \ - PIN_MODE_INPUT(GPIOB_PIN10) | \ - PIN_MODE_INPUT(GPIOB_PIN11) | \ - PIN_MODE_INPUT(GPIOB_PIN12) | \ - PIN_MODE_INPUT(GPIOB_PIN13) | \ - PIN_MODE_INPUT(GPIOB_PIN14) | \ - PIN_MODE_INPUT(GPIOB_PIN15)) -#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_D3) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | \ - PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) -#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_D3) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D6) | \ - PIN_OSPEED_HIGH(GPIOB_PIN2) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D13) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D12) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D11) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D5) | \ - PIN_OSPEED_HIGH(GPIOB_ARD_D4) | \ - PIN_OSPEED_HIGH(GPIOB_PIN8) | \ - PIN_OSPEED_HIGH(GPIOB_PIN9) | \ - PIN_OSPEED_HIGH(GPIOB_PIN10) | \ - PIN_OSPEED_HIGH(GPIOB_PIN11) | \ - PIN_OSPEED_HIGH(GPIOB_PIN12) | \ - PIN_OSPEED_HIGH(GPIOB_PIN13) | \ - PIN_OSPEED_HIGH(GPIOB_PIN14) | \ - PIN_OSPEED_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_D3) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ - PIN_PUPDR_FLOATING(GPIOB_ARD_D13) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D12) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D11) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | \ - PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOB_PIN15)) -#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_D3) | \ - PIN_ODR_HIGH(GPIOB_ARD_D6) | \ - PIN_ODR_HIGH(GPIOB_PIN2) | \ - PIN_ODR_LOW(GPIOB_ARD_D13) | \ - PIN_ODR_HIGH(GPIOB_ARD_D12) | \ - PIN_ODR_HIGH(GPIOB_ARD_D11) | \ - PIN_ODR_HIGH(GPIOB_ARD_D5) | \ - PIN_ODR_HIGH(GPIOB_ARD_D4) | \ - PIN_ODR_HIGH(GPIOB_PIN8) | \ - PIN_ODR_HIGH(GPIOB_PIN9) | \ - PIN_ODR_HIGH(GPIOB_PIN10) | \ - PIN_ODR_HIGH(GPIOB_PIN11) | \ - PIN_ODR_HIGH(GPIOB_PIN12) | \ - PIN_ODR_HIGH(GPIOB_PIN13) | \ - PIN_ODR_HIGH(GPIOB_PIN14) | \ - PIN_ODR_HIGH(GPIOB_PIN15)) -#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_D3, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D13, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D12, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D11, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | \ - PIN_AFIO_AF(GPIOB_ARD_D4, 0U)) -#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOB_PIN15, 0U)) - -/* - * GPIOC setup: - * - * PC0 - PIN0 (input pullup). - * PC1 - PIN1 (input pullup). - * PC2 - PIN2 (input pullup). - * PC3 - PIN3 (input pullup). - * PC4 - PIN4 (input pullup). - * PC5 - PIN5 (input pullup). - * PC6 - PIN6 (input pullup). - * PC7 - PIN7 (input pullup). - * PC8 - PIN8 (input pullup). - * PC9 - PIN9 (input pullup). - * PC10 - PIN10 (input pullup). - * PC11 - PIN11 (input pullup). - * PC12 - PIN12 (input pullup). - * PC13 - PIN13 (input pullup). - * PC14 - PIN14 (input pullup). - * PC15 - PIN15 (input pullup). - */ -#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ - PIN_MODE_INPUT(GPIOC_PIN1) | \ - PIN_MODE_INPUT(GPIOC_PIN2) | \ - PIN_MODE_INPUT(GPIOC_PIN3) | \ - PIN_MODE_INPUT(GPIOC_PIN4) | \ - PIN_MODE_INPUT(GPIOC_PIN5) | \ - PIN_MODE_INPUT(GPIOC_PIN6) | \ - PIN_MODE_INPUT(GPIOC_PIN7) | \ - PIN_MODE_INPUT(GPIOC_PIN8) | \ - PIN_MODE_INPUT(GPIOC_PIN9) | \ - PIN_MODE_INPUT(GPIOC_PIN10) | \ - PIN_MODE_INPUT(GPIOC_PIN11) | \ - PIN_MODE_INPUT(GPIOC_PIN12) | \ - PIN_MODE_INPUT(GPIOC_PIN13) | \ - PIN_MODE_INPUT(GPIOC_PIN14) | \ - PIN_MODE_INPUT(GPIOC_PIN15)) -#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) -#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_PIN0) | \ - PIN_OSPEED_HIGH(GPIOC_PIN1) | \ - PIN_OSPEED_HIGH(GPIOC_PIN2) | \ - PIN_OSPEED_HIGH(GPIOC_PIN3) | \ - PIN_OSPEED_HIGH(GPIOC_PIN4) | \ - PIN_OSPEED_HIGH(GPIOC_PIN5) | \ - PIN_OSPEED_HIGH(GPIOC_PIN6) | \ - PIN_OSPEED_HIGH(GPIOC_PIN7) | \ - PIN_OSPEED_HIGH(GPIOC_PIN8) | \ - PIN_OSPEED_HIGH(GPIOC_PIN9) | \ - PIN_OSPEED_HIGH(GPIOC_PIN10) | \ - PIN_OSPEED_HIGH(GPIOC_PIN11) | \ - PIN_OSPEED_HIGH(GPIOC_PIN12) | \ - PIN_OSPEED_HIGH(GPIOC_PIN13) | \ - PIN_OSPEED_HIGH(GPIOC_PIN14) | \ - PIN_OSPEED_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOC_PIN15)) -#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ - PIN_ODR_HIGH(GPIOC_PIN1) | \ - PIN_ODR_HIGH(GPIOC_PIN2) | \ - PIN_ODR_HIGH(GPIOC_PIN3) | \ - PIN_ODR_HIGH(GPIOC_PIN4) | \ - PIN_ODR_HIGH(GPIOC_PIN5) | \ - PIN_ODR_HIGH(GPIOC_PIN6) | \ - PIN_ODR_HIGH(GPIOC_PIN7) | \ - PIN_ODR_HIGH(GPIOC_PIN8) | \ - PIN_ODR_HIGH(GPIOC_PIN9) | \ - PIN_ODR_HIGH(GPIOC_PIN10) | \ - PIN_ODR_HIGH(GPIOC_PIN11) | \ - PIN_ODR_HIGH(GPIOC_PIN12) | \ - PIN_ODR_HIGH(GPIOC_PIN13) | \ - PIN_ODR_HIGH(GPIOC_PIN14) | \ - PIN_ODR_HIGH(GPIOC_PIN15)) -#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN7, 0U)) -#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOC_PIN15, 0U)) - -/* - * GPIOD setup: - * - * PD0 - PIN0 (input pullup). - * PD1 - PIN1 (input pullup). - * PD2 - PIN2 (input pullup). - * PD3 - PIN3 (input pullup). - * PD4 - PIN4 (input pullup). - * PD5 - PIN5 (input pullup). - * PD6 - PIN6 (input pullup). - * PD7 - PIN7 (input pullup). - * PD8 - PIN8 (input pullup). - * PD9 - PIN9 (input pullup). - * PD10 - PIN10 (input pullup). - * PD11 - PIN11 (input pullup). - * PD12 - PIN12 (input pullup). - * PD13 - PIN13 (input pullup). - * PD14 - PIN14 (input pullup). - * PD15 - PIN15 (input pullup). - */ -#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ - PIN_MODE_INPUT(GPIOD_PIN1) | \ - PIN_MODE_INPUT(GPIOD_PIN2) | \ - PIN_MODE_INPUT(GPIOD_PIN3) | \ - PIN_MODE_INPUT(GPIOD_PIN4) | \ - PIN_MODE_INPUT(GPIOD_PIN5) | \ - PIN_MODE_INPUT(GPIOD_PIN6) | \ - PIN_MODE_INPUT(GPIOD_PIN7) | \ - PIN_MODE_INPUT(GPIOD_PIN8) | \ - PIN_MODE_INPUT(GPIOD_PIN9) | \ - PIN_MODE_INPUT(GPIOD_PIN10) | \ - PIN_MODE_INPUT(GPIOD_PIN11) | \ - PIN_MODE_INPUT(GPIOD_PIN12) | \ - PIN_MODE_INPUT(GPIOD_PIN13) | \ - PIN_MODE_INPUT(GPIOD_PIN14) | \ - PIN_MODE_INPUT(GPIOD_PIN15)) -#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) -#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ - PIN_OSPEED_HIGH(GPIOD_PIN1) | \ - PIN_OSPEED_HIGH(GPIOD_PIN2) | \ - PIN_OSPEED_HIGH(GPIOD_PIN3) | \ - PIN_OSPEED_HIGH(GPIOD_PIN4) | \ - PIN_OSPEED_HIGH(GPIOD_PIN5) | \ - PIN_OSPEED_HIGH(GPIOD_PIN6) | \ - PIN_OSPEED_HIGH(GPIOD_PIN7) | \ - PIN_OSPEED_HIGH(GPIOD_PIN8) | \ - PIN_OSPEED_HIGH(GPIOD_PIN9) | \ - PIN_OSPEED_HIGH(GPIOD_PIN10) | \ - PIN_OSPEED_HIGH(GPIOD_PIN11) | \ - PIN_OSPEED_HIGH(GPIOD_PIN12) | \ - PIN_OSPEED_HIGH(GPIOD_PIN13) | \ - PIN_OSPEED_HIGH(GPIOD_PIN14) | \ - PIN_OSPEED_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOD_PIN15)) -#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ - PIN_ODR_HIGH(GPIOD_PIN1) | \ - PIN_ODR_HIGH(GPIOD_PIN2) | \ - PIN_ODR_HIGH(GPIOD_PIN3) | \ - PIN_ODR_HIGH(GPIOD_PIN4) | \ - PIN_ODR_HIGH(GPIOD_PIN5) | \ - PIN_ODR_HIGH(GPIOD_PIN6) | \ - PIN_ODR_HIGH(GPIOD_PIN7) | \ - PIN_ODR_HIGH(GPIOD_PIN8) | \ - PIN_ODR_HIGH(GPIOD_PIN9) | \ - PIN_ODR_HIGH(GPIOD_PIN10) | \ - PIN_ODR_HIGH(GPIOD_PIN11) | \ - PIN_ODR_HIGH(GPIOD_PIN12) | \ - PIN_ODR_HIGH(GPIOD_PIN13) | \ - PIN_ODR_HIGH(GPIOD_PIN14) | \ - PIN_ODR_HIGH(GPIOD_PIN15)) -#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN7, 0U)) -#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOD_PIN15, 0U)) - -/* - * GPIOE setup: - * - * PE0 - PIN0 (input pullup). - * PE1 - PIN1 (input pullup). - * PE2 - PIN2 (input pullup). - * PE3 - PIN3 (input pullup). - * PE4 - PIN4 (input pullup). - * PE5 - PIN5 (input pullup). - * PE6 - PIN6 (input pullup). - * PE7 - PIN7 (input pullup). - * PE8 - PIN8 (input pullup). - * PE9 - PIN9 (input pullup). - * PE10 - PIN10 (input pullup). - * PE11 - PIN11 (input pullup). - * PE12 - PIN12 (input pullup). - * PE13 - PIN13 (input pullup). - * PE14 - PIN14 (input pullup). - * PE15 - PIN15 (input pullup). - */ -#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ - PIN_MODE_INPUT(GPIOE_PIN1) | \ - PIN_MODE_INPUT(GPIOE_PIN2) | \ - PIN_MODE_INPUT(GPIOE_PIN3) | \ - PIN_MODE_INPUT(GPIOE_PIN4) | \ - PIN_MODE_INPUT(GPIOE_PIN5) | \ - PIN_MODE_INPUT(GPIOE_PIN6) | \ - PIN_MODE_INPUT(GPIOE_PIN7) | \ - PIN_MODE_INPUT(GPIOE_PIN8) | \ - PIN_MODE_INPUT(GPIOE_PIN9) | \ - PIN_MODE_INPUT(GPIOE_PIN10) | \ - PIN_MODE_INPUT(GPIOE_PIN11) | \ - PIN_MODE_INPUT(GPIOE_PIN12) | \ - PIN_MODE_INPUT(GPIOE_PIN13) | \ - PIN_MODE_INPUT(GPIOE_PIN14) | \ - PIN_MODE_INPUT(GPIOE_PIN15)) -#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) -#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ - PIN_OSPEED_HIGH(GPIOE_PIN1) | \ - PIN_OSPEED_HIGH(GPIOE_PIN2) | \ - PIN_OSPEED_HIGH(GPIOE_PIN3) | \ - PIN_OSPEED_HIGH(GPIOE_PIN4) | \ - PIN_OSPEED_HIGH(GPIOE_PIN5) | \ - PIN_OSPEED_HIGH(GPIOE_PIN6) | \ - PIN_OSPEED_HIGH(GPIOE_PIN7) | \ - PIN_OSPEED_HIGH(GPIOE_PIN8) | \ - PIN_OSPEED_HIGH(GPIOE_PIN9) | \ - PIN_OSPEED_HIGH(GPIOE_PIN10) | \ - PIN_OSPEED_HIGH(GPIOE_PIN11) | \ - PIN_OSPEED_HIGH(GPIOE_PIN12) | \ - PIN_OSPEED_HIGH(GPIOE_PIN13) | \ - PIN_OSPEED_HIGH(GPIOE_PIN14) | \ - PIN_OSPEED_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOE_PIN15)) -#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ - PIN_ODR_HIGH(GPIOE_PIN1) | \ - PIN_ODR_HIGH(GPIOE_PIN2) | \ - PIN_ODR_HIGH(GPIOE_PIN3) | \ - PIN_ODR_HIGH(GPIOE_PIN4) | \ - PIN_ODR_HIGH(GPIOE_PIN5) | \ - PIN_ODR_HIGH(GPIOE_PIN6) | \ - PIN_ODR_HIGH(GPIOE_PIN7) | \ - PIN_ODR_HIGH(GPIOE_PIN8) | \ - PIN_ODR_HIGH(GPIOE_PIN9) | \ - PIN_ODR_HIGH(GPIOE_PIN10) | \ - PIN_ODR_HIGH(GPIOE_PIN11) | \ - PIN_ODR_HIGH(GPIOE_PIN12) | \ - PIN_ODR_HIGH(GPIOE_PIN13) | \ - PIN_ODR_HIGH(GPIOE_PIN14) | \ - PIN_ODR_HIGH(GPIOE_PIN15)) -#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN7, 0U)) -#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOE_PIN15, 0U)) - -/* - * GPIOF setup: - * - * PF0 - ARD_D7 (input pullup). - * PF1 - ARD_D8 (input pullup). - * PF2 - PIN2 (input pullup). - * PF3 - PIN3 (input pullup). - * PF4 - PIN4 (input pullup). - * PF5 - PIN5 (input pullup). - * PF6 - PIN6 (input pullup). - * PF7 - PIN7 (input pullup). - * PF8 - PIN8 (input pullup). - * PF9 - PIN9 (input pullup). - * PF10 - PIN10 (input pullup). - * PF11 - PIN11 (input pullup). - * PF12 - PIN12 (input pullup). - * PF13 - PIN13 (input pullup). - * PF14 - PIN14 (input pullup). - * PF15 - PIN15 (input pullup). - */ -#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_ARD_D7) | \ - PIN_MODE_INPUT(GPIOF_ARD_D8) | \ - PIN_MODE_INPUT(GPIOF_PIN2) | \ - PIN_MODE_INPUT(GPIOF_PIN3) | \ - PIN_MODE_INPUT(GPIOF_PIN4) | \ - PIN_MODE_INPUT(GPIOF_PIN5) | \ - PIN_MODE_INPUT(GPIOF_PIN6) | \ - PIN_MODE_INPUT(GPIOF_PIN7) | \ - PIN_MODE_INPUT(GPIOF_PIN8) | \ - PIN_MODE_INPUT(GPIOF_PIN9) | \ - PIN_MODE_INPUT(GPIOF_PIN10) | \ - PIN_MODE_INPUT(GPIOF_PIN11) | \ - PIN_MODE_INPUT(GPIOF_PIN12) | \ - PIN_MODE_INPUT(GPIOF_PIN13) | \ - PIN_MODE_INPUT(GPIOF_PIN14) | \ - PIN_MODE_INPUT(GPIOF_PIN15)) -#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_ARD_D7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_ARD_D8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ - PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) -#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_ARD_D7) | \ - PIN_OSPEED_HIGH(GPIOF_ARD_D8) | \ - PIN_OSPEED_HIGH(GPIOF_PIN2) | \ - PIN_OSPEED_HIGH(GPIOF_PIN3) | \ - PIN_OSPEED_HIGH(GPIOF_PIN4) | \ - PIN_OSPEED_HIGH(GPIOF_PIN5) | \ - PIN_OSPEED_HIGH(GPIOF_PIN6) | \ - PIN_OSPEED_HIGH(GPIOF_PIN7) | \ - PIN_OSPEED_HIGH(GPIOF_PIN8) | \ - PIN_OSPEED_HIGH(GPIOF_PIN9) | \ - PIN_OSPEED_HIGH(GPIOF_PIN10) | \ - PIN_OSPEED_HIGH(GPIOF_PIN11) | \ - PIN_OSPEED_HIGH(GPIOF_PIN12) | \ - PIN_OSPEED_HIGH(GPIOF_PIN13) | \ - PIN_OSPEED_HIGH(GPIOF_PIN14) | \ - PIN_OSPEED_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_ARD_D7) | \ - PIN_PUPDR_PULLUP(GPIOF_ARD_D8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ - PIN_PUPDR_PULLUP(GPIOF_PIN15)) -#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_ARD_D7) | \ - PIN_ODR_HIGH(GPIOF_ARD_D8) | \ - PIN_ODR_HIGH(GPIOF_PIN2) | \ - PIN_ODR_HIGH(GPIOF_PIN3) | \ - PIN_ODR_HIGH(GPIOF_PIN4) | \ - PIN_ODR_HIGH(GPIOF_PIN5) | \ - PIN_ODR_HIGH(GPIOF_PIN6) | \ - PIN_ODR_HIGH(GPIOF_PIN7) | \ - PIN_ODR_HIGH(GPIOF_PIN8) | \ - PIN_ODR_HIGH(GPIOF_PIN9) | \ - PIN_ODR_HIGH(GPIOF_PIN10) | \ - PIN_ODR_HIGH(GPIOF_PIN11) | \ - PIN_ODR_HIGH(GPIOF_PIN12) | \ - PIN_ODR_HIGH(GPIOF_PIN13) | \ - PIN_ODR_HIGH(GPIOF_PIN14) | \ - PIN_ODR_HIGH(GPIOF_PIN15)) -#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_ARD_D7, 0U) | \ - PIN_AFIO_AF(GPIOF_ARD_D8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN7, 0U)) -#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ - PIN_AFIO_AF(GPIOF_PIN15, 0U)) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* BOARD_H */ diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk deleted file mode 100644 index a830697a993..00000000000 --- a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/DEVICE_ONE/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/DEVICE_ONE diff --git a/keyboards/akegata_denki/device_one/rules.mk b/keyboards/akegata_denki/device_one/rules.mk index 9519995cddf..f8e76a5d390 100644 --- a/keyboards/akegata_denki/device_one/rules.mk +++ b/keyboards/akegata_denki/device_one/rules.mk @@ -1,7 +1,7 @@ # MCU name MCU = STM32F042 -BOARD = DEVICE_ONE +BOARD = ST_NUCLEO32_F042K6 # Build Options # comment out to disable the options. diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h b/keyboards/chavdai40/board.h similarity index 100% rename from keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h rename to keyboards/chavdai40/board.h diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c b/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c deleted file mode 100644 index faf57654102..00000000000 --- a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB(STM32_GPIO_EN_MASK); - rccEnableAHB(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* CHTODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* CHTODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* CHTODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* CHTODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @note You can add your board-specific code here. - */ -void boardInit(void) { - -} diff --git a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk b/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk deleted file mode 100644 index 3fff4fbbf81..00000000000 --- a/keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F042X6 - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/ergodox_stm32/board.h b/keyboards/ergodox_stm32/board.h new file mode 100644 index 00000000000..23f94957894 --- /dev/null +++ b/keyboards/ergodox_stm32/board.h @@ -0,0 +1,37 @@ +/* +Copyright 2021 QMK + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include_next + +#ifdef STM32_LSECLK +#undef STM32_LSECLK +#endif // STM32_LSECLK +#define STM32_LSECLK 32768 + +#ifdef STM32_HSECLK +#undef STM32_HSECLK +#endif // STM32_HSECLK +#define STM32_HSECLK 8000000 + +#undef VAL_GPIOACRL +#define VAL_GPIOACRL 0x88888888 + +#undef VAL_GPIOAODR +#define VAL_GPIOAODR 0xFFFFFFFF + +#undef VAL_GPIOCCRH +#define VAL_GPIOCCRH 0x88888888 diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c deleted file mode 100644 index 41a603b9517..00000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h deleted file mode 100644 index 307a17e3882..00000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Board identifier. - */ -#define BOARD_JM60 -#define BOARD_NAME "ErgoDox STM32 Keyboard" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 0 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - * - * Only xB (128KB Flash) is defined, but it's identical to the - * x8 version (64KB Flash) except for the Flash region size in the - * linker script. For x8 parts use xB here and change to the x8 linker - * script in the project Makefile. - */ -#define STM32F103xB - -/* - * IO pins assignments - * - * numbering is sorted by onboard/connectors, as from the schematics in - * http://www.vcc-gnd.com/read.php?tid=369 - */ - -/* on-board */ -#define GPIOA_USBDM 11 // pin 8 -#define GPIOA_USBDP 12 // pin 9 - -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -#define usb_lld_connect_bus(usbp) /* always connected */ - -/* - * USB bus de-activation macro, required by the USB driver. - */ -#define usb_lld_disconnect_bus(usbp) /* always connected */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk b/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk deleted file mode 100644 index 85ff835ef48..00000000000 --- a/keyboards/ergodox_stm32/boards/ERGODOX_STM32_BOARD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/ERGODOX_STM32_BOARD diff --git a/keyboards/ergodox_stm32/rules.mk b/keyboards/ergodox_stm32/rules.mk index cd1f2d97c4d..c2eaaa52690 100644 --- a/keyboards/ergodox_stm32/rules.mk +++ b/keyboards/ergodox_stm32/rules.mk @@ -2,7 +2,7 @@ MCU = STM32F103 MCU_LDSCRIPT = stm32f103_bootloader -BOARD = ERGODOX_STM32_BOARD +BOARD = ST_NUCLEO64_F103RB CFLAGS += "-Wno-error=deprecated" EXTRAFLAGS = -O0 -g diff --git a/keyboards/jm60/board.h b/keyboards/jm60/board.h new file mode 100644 index 00000000000..23f94957894 --- /dev/null +++ b/keyboards/jm60/board.h @@ -0,0 +1,37 @@ +/* +Copyright 2021 QMK + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include_next + +#ifdef STM32_LSECLK +#undef STM32_LSECLK +#endif // STM32_LSECLK +#define STM32_LSECLK 32768 + +#ifdef STM32_HSECLK +#undef STM32_HSECLK +#endif // STM32_HSECLK +#define STM32_HSECLK 8000000 + +#undef VAL_GPIOACRL +#define VAL_GPIOACRL 0x88888888 + +#undef VAL_GPIOAODR +#define VAL_GPIOAODR 0xFFFFFFFF + +#undef VAL_GPIOCCRH +#define VAL_GPIOCCRH 0x88888888 diff --git a/keyboards/jm60/boards/JM60_BOARD/board.c b/keyboards/jm60/boards/JM60_BOARD/board.c deleted file mode 100644 index 41a603b9517..00000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, - {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, - {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, - {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, - {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, -}; -#endif - -/* - * Early initialization code. - * This initialization must be performed just after stack setup and before - * any other initialization. - */ -void __early_init(void) { - - stm32_clock_init(); -} - -/* - * Board-specific initialization code. - */ -void boardInit(void) { -} diff --git a/keyboards/jm60/boards/JM60_BOARD/board.h b/keyboards/jm60/boards/JM60_BOARD/board.h deleted file mode 100644 index 74815122c3e..00000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Board identifier. - */ -#define BOARD_JM60 -#define BOARD_NAME "JM60 keyboard" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - * - * Only xB (128KB Flash) is defined, but it's identical to the - * x8 version (64KB Flash) except for the Flash region size in the - * linker script. For x8 parts use xB here and change to the x8 linker - * script in the project Makefile. - */ -#define STM32F103xB - -/* - * IO pins assignments - * - * numbering is sorted by onboard/connectors, as from the schematics in - * http://www.vcc-gnd.com/read.php?tid=369 - */ - -/* on-board */ -#define GPIOA_USBDM 11 // pin 8 -#define GPIOA_USBDP 12 // pin 9 - -#define GPIOC_OSC32_IN 14 -#define GPIOC_OSC32_OUT 15 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFFFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -/* - * USB bus activation macro, required by the USB driver. - */ -#define usb_lld_connect_bus(usbp) /* always connected */ - -/* - * USB bus de-activation macro, required by the USB driver. - */ -#define usb_lld_disconnect_bus(usbp) /* always connected */ - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/keyboards/jm60/boards/JM60_BOARD/board.mk b/keyboards/jm60/boards/JM60_BOARD/board.mk deleted file mode 100644 index e2f051c314c..00000000000 --- a/keyboards/jm60/boards/JM60_BOARD/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/JM60_BOARD/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/JM60_BOARD diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index 5992cc0559b..6aa824baee5 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -2,7 +2,7 @@ MCU = STM32F103 MCU_LDSCRIPT = jm60_bootloader -BOARD = JM60_BOARD +BOARD = ST_NUCLEO64_F103RB # Build Options # change yes to no to disable diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.h b/keyboards/matrix/m20add/board.h similarity index 100% rename from keyboards/matrix/m20add/boards/m20add_bd/board.h rename to keyboards/matrix/m20add/board.h diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.c b/keyboards/matrix/m20add/boards/m20add_bd/board.c deleted file mode 100644 index fa5723ec2bd..00000000000 --- a/keyboards/matrix/m20add/boards/m20add_bd/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/matrix/m20add/boards/m20add_bd/board.mk b/keyboards/matrix/m20add/boards/m20add_bd/board.mk deleted file mode 100644 index a12d8670d5a..00000000000 --- a/keyboards/matrix/m20add/boards/m20add_bd/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/m20add_bd/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/m20add_bd - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk index fb97c1d3c8f..93ddf05e915 100644 --- a/keyboards/matrix/m20add/rules.mk +++ b/keyboards/matrix/m20add/rules.mk @@ -8,7 +8,7 @@ MCU_LDSCRIPT = m20add_boot # Board: it should exist either in /os/hal/boards/ # or /boards -BOARD = m20add_bd +BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options. diff --git a/keyboards/matrix/noah/boards/noah_bd/board.h b/keyboards/matrix/noah/board.h similarity index 100% rename from keyboards/matrix/noah/boards/noah_bd/board.h rename to keyboards/matrix/noah/board.h diff --git a/keyboards/matrix/noah/boards/noah_bd/board.c b/keyboards/matrix/noah/boards/noah_bd/board.c deleted file mode 100644 index fa5723ec2bd..00000000000 --- a/keyboards/matrix/noah/boards/noah_bd/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file has been automatically generated using ChibiStudio board - * generator plugin. Do not edit manually. - */ - -#include -#include - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/** - * @brief Type of STM32 GPIO port setup. - */ -typedef struct { - uint32_t moder; - uint32_t otyper; - uint32_t ospeedr; - uint32_t pupdr; - uint32_t odr; - uint32_t afrl; - uint32_t afrh; -} gpio_setup_t; - -/** - * @brief Type of STM32 GPIO initialization data. - */ -typedef struct { -#if STM32_HAS_GPIOA || defined(__DOXYGEN__) - gpio_setup_t PAData; -#endif -#if STM32_HAS_GPIOB || defined(__DOXYGEN__) - gpio_setup_t PBData; -#endif -#if STM32_HAS_GPIOC || defined(__DOXYGEN__) - gpio_setup_t PCData; -#endif -#if STM32_HAS_GPIOD || defined(__DOXYGEN__) - gpio_setup_t PDData; -#endif -#if STM32_HAS_GPIOE || defined(__DOXYGEN__) - gpio_setup_t PEData; -#endif -#if STM32_HAS_GPIOF || defined(__DOXYGEN__) - gpio_setup_t PFData; -#endif -#if STM32_HAS_GPIOG || defined(__DOXYGEN__) - gpio_setup_t PGData; -#endif -#if STM32_HAS_GPIOH || defined(__DOXYGEN__) - gpio_setup_t PHData; -#endif -#if STM32_HAS_GPIOI || defined(__DOXYGEN__) - gpio_setup_t PIData; -#endif -#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_setup_t PJData; -#endif -#if STM32_HAS_GPIOK || defined(__DOXYGEN__) - gpio_setup_t PKData; -#endif -} gpio_config_t; - -/** - * @brief STM32 GPIO static initialization data. - */ -static const gpio_config_t gpio_default_config = { -#if STM32_HAS_GPIOA - {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, - VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, -#endif -#if STM32_HAS_GPIOB - {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, - VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, -#endif -#if STM32_HAS_GPIOC - {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, - VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, -#endif -#if STM32_HAS_GPIOD - {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, - VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, -#endif -#if STM32_HAS_GPIOE - {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, - VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, -#endif -#if STM32_HAS_GPIOF - {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, - VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, -#endif -#if STM32_HAS_GPIOG - {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, - VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, -#endif -#if STM32_HAS_GPIOH - {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, - VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, -#endif -#if STM32_HAS_GPIOI - {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, - VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, -#endif -#if STM32_HAS_GPIOJ - {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, - VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, -#endif -#if STM32_HAS_GPIOK - {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, - VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { - - gpiop->OTYPER = config->otyper; - gpiop->OSPEEDR = config->ospeedr; - gpiop->PUPDR = config->pupdr; - gpiop->ODR = config->odr; - gpiop->AFRL = config->afrl; - gpiop->AFRH = config->afrh; - gpiop->MODER = config->moder; -} - -static void stm32_gpio_init(void) { - - /* Enabling GPIO-related clocks, the mask comes from the - registry header file.*/ - rccResetAHB1(STM32_GPIO_EN_MASK); - rccEnableAHB1(STM32_GPIO_EN_MASK, true); - - /* Initializing all the defined GPIO ports.*/ -#if STM32_HAS_GPIOA - gpio_init(GPIOA, &gpio_default_config.PAData); -#endif -#if STM32_HAS_GPIOB - gpio_init(GPIOB, &gpio_default_config.PBData); -#endif -#if STM32_HAS_GPIOC - gpio_init(GPIOC, &gpio_default_config.PCData); -#endif -#if STM32_HAS_GPIOD - gpio_init(GPIOD, &gpio_default_config.PDData); -#endif -#if STM32_HAS_GPIOE - gpio_init(GPIOE, &gpio_default_config.PEData); -#endif -#if STM32_HAS_GPIOF - gpio_init(GPIOF, &gpio_default_config.PFData); -#endif -#if STM32_HAS_GPIOG - gpio_init(GPIOG, &gpio_default_config.PGData); -#endif -#if STM32_HAS_GPIOH - gpio_init(GPIOH, &gpio_default_config.PHData); -#endif -#if STM32_HAS_GPIOI - gpio_init(GPIOI, &gpio_default_config.PIData); -#endif -#if STM32_HAS_GPIOJ - gpio_init(GPIOJ, &gpio_default_config.PJData); -#endif -#if STM32_HAS_GPIOK - gpio_init(GPIOK, &gpio_default_config.PKData); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Early initialization code. - * @details GPIO ports and system clocks are initialized before everything - * else. - */ -void __early_init(void) { - - stm32_gpio_init(); - stm32_clock_init(); -} - -#if HAL_USE_SDC || defined(__DOXYGEN__) -/** - * @brief SDC card detection. - */ -bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief SDC card write protection detection. - */ -bool sdc_lld_is_write_protected(SDCDriver *sdcp) { - - (void)sdcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif /* HAL_USE_SDC */ - -#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) -/** - * @brief MMC_SPI card detection. - */ -bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return true; -} - -/** - * @brief MMC_SPI card write protection detection. - */ -bool mmc_lld_is_write_protected(MMCDriver *mmcp) { - - (void)mmcp; - /* TODO: Fill the implementation.*/ - return false; -} -#endif - -/** - * @brief Board-specific initialization code. - * @todo Add your board-specific code, if any. - */ -void boardInit(void) { - -} diff --git a/keyboards/matrix/noah/boards/noah_bd/board.mk b/keyboards/matrix/noah/boards/noah_bd/board.mk deleted file mode 100644 index 185f9e1e979..00000000000 --- a/keyboards/matrix/noah/boards/noah_bd/board.mk +++ /dev/null @@ -1,9 +0,0 @@ -# List of all the board related files. -BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c - -# Required include directories -BOARDINC = $(BOARD_PATH)/boards/noah_bd - -# Shared variables -ALLCSRC += $(BOARDSRC) -ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk index aacd2882b6c..5566bd26ac6 100644 --- a/keyboards/matrix/noah/rules.mk +++ b/keyboards/matrix/noah/rules.mk @@ -8,7 +8,7 @@ MCU_LDSCRIPT = noah_boot # Board: it should exist either in /os/hal/boards/ # or /boards -BOARD = noah_bd +BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options. From a7c45daeb8022097a0dbb3859bfcd56b73d65d14 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 20 Jan 2021 00:59:12 +1100 Subject: [PATCH 073/145] ChibiOS 20.3.2 (#11495) * Update ChibiOS submodule * Update ChibiOS-Contrib submodule * Update ChibiOS config files --- lib/chibios | 2 +- lib/chibios-contrib | 2 +- .../chibios/QMK_PROTON_C/configs/chconf.h | 86 ++++++++++++++----- .../chibios/QMK_PROTON_C/configs/halconf.h | 10 ++- platforms/chibios/common/configs/chconf.h | 86 ++++++++++++++----- platforms/chibios/common/configs/halconf.h | 10 ++- 6 files changed, 146 insertions(+), 50 deletions(-) diff --git a/lib/chibios b/lib/chibios index 313416b8fda..ffe54d63cb1 160000 --- a/lib/chibios +++ b/lib/chibios @@ -1 +1 @@ -Subproject commit 313416b8fda90d9973a749a0a35970956852c286 +Subproject commit ffe54d63cb10a355add318f8e922e39f1c3d4bfd diff --git a/lib/chibios-contrib b/lib/chibios-contrib index e3a3a240477..61baa6b0361 160000 --- a/lib/chibios-contrib +++ b/lib/chibios-contrib @@ -1 +1 @@ -Subproject commit e3a3a24047717af33b098266e11c2e4e5102206a +Subproject commit 61baa6b036138c155f7cfc5646d833d9423f3243 diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/QMK_PROTON_C/configs/chconf.h index aac33037058..94457652924 100644 --- a/platforms/chibios/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/QMK_PROTON_C/configs/chconf.h @@ -29,7 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ +#define _CHIBIOS_RT_CONF_VER_6_1_ /*===========================================================================*/ /** @@ -108,21 +108,6 @@ #define CH_CFG_TIME_QUANTUM 0 #endif -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - /** * @brief Idle thread automatic spawn suppression. * @details When this option is activated the function @p chSysInit() @@ -311,6 +296,28 @@ #define CH_CFG_USE_MESSAGES_PRIORITY TRUE #endif +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name OSLIB options + * @{ + */ +/*===========================================================================*/ + /** * @brief Mailboxes APIs. * @details If enabled then the asynchronous messages (mailboxes) APIs are @@ -334,6 +341,21 @@ #define CH_CFG_USE_MEMCORE TRUE #endif +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + /** * @brief Heap Allocator APIs. * @details If enabled then the memory heap allocator APIs are included @@ -382,16 +404,36 @@ #endif /** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included + * @brief Objects Caches APIs. + * @details If enabled then the objects caches APIs are included * in the kernel. * * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE +#if !defined(CH_CFG_USE_OBJ_CACHES) +#define CH_CFG_USE_OBJ_CACHES FALSE +#endif + +/** + * @brief Delegate threads APIs. + * @details If enabled then the delegate threads APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_DELEGATES) +#define CH_CFG_USE_DELEGATES FALSE +#endif + +/** + * @brief Jobs Queues APIs. + * @details If enabled then the jobs queues APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_JOBS) +#define CH_CFG_USE_JOBS FALSE #endif /** @} */ diff --git a/platforms/chibios/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/QMK_PROTON_C/configs/halconf.h index a9f2cf77b49..41fbac29e0a 100644 --- a/platforms/chibios/QMK_PROTON_C/configs/halconf.h +++ b/platforms/chibios/QMK_PROTON_C/configs/halconf.h @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ +#define _CHIBIOS_HAL_CONF_VER_7_1_ #include @@ -68,6 +68,13 @@ #define HAL_USE_DAC TRUE #endif +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL FALSE +#endif + /** * @brief Enables the GPT subsystem. */ @@ -451,7 +458,6 @@ #define SPI_USE_CIRCULAR FALSE #endif - /** * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @note Disabling this option saves both code and data space. diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h index 51ec2fb5b88..78516a7681a 100644 --- a/platforms/chibios/common/configs/chconf.h +++ b/platforms/chibios/common/configs/chconf.h @@ -29,7 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ +#define _CHIBIOS_RT_CONF_VER_6_1_ /*===========================================================================*/ /** @@ -108,21 +108,6 @@ #define CH_CFG_TIME_QUANTUM 0 #endif -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - /** * @brief Idle thread automatic spawn suppression. * @details When this option is activated the function @p chSysInit() @@ -311,6 +296,28 @@ #define CH_CFG_USE_MESSAGES_PRIORITY FALSE #endif +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name OSLIB options + * @{ + */ +/*===========================================================================*/ + /** * @brief Mailboxes APIs. * @details If enabled then the asynchronous messages (mailboxes) APIs are @@ -334,6 +341,21 @@ #define CH_CFG_USE_MEMCORE FALSE #endif +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + /** * @brief Heap Allocator APIs. * @details If enabled then the memory heap allocator APIs are included @@ -382,16 +404,36 @@ #endif /** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included + * @brief Objects Caches APIs. + * @details If enabled then the objects caches APIs are included * in the kernel. * * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE +#if !defined(CH_CFG_USE_OBJ_CACHES) +#define CH_CFG_USE_OBJ_CACHES FALSE +#endif + +/** + * @brief Delegate threads APIs. + * @details If enabled then the delegate threads APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_DELEGATES) +#define CH_CFG_USE_DELEGATES FALSE +#endif + +/** + * @brief Jobs Queues APIs. + * @details If enabled then the jobs queues APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_JOBS) +#define CH_CFG_USE_JOBS FALSE #endif /** @} */ diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h index 880e7f97aa3..264ae4e6c1d 100644 --- a/platforms/chibios/common/configs/halconf.h +++ b/platforms/chibios/common/configs/halconf.h @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ +#define _CHIBIOS_HAL_CONF_VER_7_1_ #include @@ -68,6 +68,13 @@ #define HAL_USE_DAC FALSE #endif +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL FALSE +#endif + /** * @brief Enables the GPT subsystem. */ @@ -451,7 +458,6 @@ #define SPI_USE_CIRCULAR FALSE #endif - /** * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @note Disabling this option saves both code and data space. From 3b1ffd2ede296e17668f8763c7083aa4c9a3ce7d Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 20 Jan 2021 01:50:51 +1100 Subject: [PATCH 074/145] ChibiOS enable memory allocations (#11620) --- keyboards/akegata_denki/device_one/chconf.h | 2 +- keyboards/ergodox_stm32/chconf.h | 2 +- keyboards/handwired/onekey/blackpill_f401/chconf.h | 2 +- keyboards/handwired/onekey/blackpill_f411/chconf.h | 2 +- keyboards/handwired/onekey/teensy_32/chconf.h | 2 +- keyboards/handwired/onekey/teensy_lc/chconf.h | 2 +- keyboards/handwired/pill60/blackpill_f401/chconf.h | 2 +- keyboards/handwired/pill60/blackpill_f411/chconf.h | 2 +- keyboards/handwired/riblee_f401/chconf.h | 2 +- keyboards/handwired/riblee_f411/chconf.h | 2 +- keyboards/handwired/twadlee/tp69/chconf.h | 2 +- keyboards/jm60/chconf.h | 2 +- keyboards/matrix/m20add/chconf.h | 2 +- keyboards/matrix/noah/chconf.h | 2 +- platforms/chibios/QMK_PROTON_C/configs/chconf.h | 2 +- platforms/chibios/common/configs/chconf.h | 2 +- 16 files changed, 16 insertions(+), 16 deletions(-) diff --git a/keyboards/akegata_denki/device_one/chconf.h b/keyboards/akegata_denki/device_one/chconf.h index 75a582ab6a3..23eb194e349 100644 --- a/keyboards/akegata_denki/device_one/chconf.h +++ b/keyboards/akegata_denki/device_one/chconf.h @@ -45,7 +45,7 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/ergodox_stm32/chconf.h b/keyboards/ergodox_stm32/chconf.h index 2f43ed7b08c..c4748a07844 100644 --- a/keyboards/ergodox_stm32/chconf.h +++ b/keyboards/ergodox_stm32/chconf.h @@ -47,7 +47,7 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h index 1900489e211..8f925a66104 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h index fade216de57..e9590e1bb08 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/onekey/teensy_32/chconf.h b/keyboards/handwired/onekey/teensy_32/chconf.h index 05beb6439d2..3b67dc63f72 100644 --- a/keyboards/handwired/onekey/teensy_32/chconf.h +++ b/keyboards/handwired/onekey/teensy_32/chconf.h @@ -31,7 +31,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/onekey/teensy_lc/chconf.h b/keyboards/handwired/onekey/teensy_lc/chconf.h index b888a1fc16b..8c53cb794ba 100644 --- a/keyboards/handwired/onekey/teensy_lc/chconf.h +++ b/keyboards/handwired/onekey/teensy_lc/chconf.h @@ -31,7 +31,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h index 97772fe4b33..600a0a9235a 100644 --- a/keyboards/handwired/pill60/blackpill_f401/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h index e23e9214b7d..8fc9c3b8cad 100644 --- a/keyboards/handwired/pill60/blackpill_f411/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h index 1a51b391a3b..f868c95219c 100644 --- a/keyboards/handwired/riblee_f401/chconf.h +++ b/keyboards/handwired/riblee_f401/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h index 6b93caf1d57..649324a9374 100644 --- a/keyboards/handwired/riblee_f411/chconf.h +++ b/keyboards/handwired/riblee_f411/chconf.h @@ -25,7 +25,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h index 92eafd2515e..d099106f623 100644 --- a/keyboards/handwired/twadlee/tp69/chconf.h +++ b/keyboards/handwired/twadlee/tp69/chconf.h @@ -31,7 +31,7 @@ #define CH_CFG_USE_MEMCORE TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/jm60/chconf.h b/keyboards/jm60/chconf.h index e3c3407fdaf..94a6d69d191 100644 --- a/keyboards/jm60/chconf.h +++ b/keyboards/jm60/chconf.h @@ -47,7 +47,7 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/matrix/m20add/chconf.h b/keyboards/matrix/m20add/chconf.h index c2cda22459e..60dac2fa9e5 100644 --- a/keyboards/matrix/m20add/chconf.h +++ b/keyboards/matrix/m20add/chconf.h @@ -47,7 +47,7 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h index 08f35b6974c..44fff871dac 100644 --- a/keyboards/matrix/noah/chconf.h +++ b/keyboards/matrix/noah/chconf.h @@ -47,7 +47,7 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/QMK_PROTON_C/configs/chconf.h index 94457652924..a1cbf68086c 100644 --- a/platforms/chibios/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/QMK_PROTON_C/configs/chconf.h @@ -453,7 +453,7 @@ * @note The default is @p FALSE. */ #if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE +#define CH_CFG_USE_FACTORY FALSE #endif /** diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h index 78516a7681a..44327a82d71 100644 --- a/platforms/chibios/common/configs/chconf.h +++ b/platforms/chibios/common/configs/chconf.h @@ -338,7 +338,7 @@ * @note The default is @p TRUE. */ #if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE FALSE +#define CH_CFG_USE_MEMCORE TRUE #endif /** From 78fe155b7241900988f26479b8e417623b137320 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 20 Jan 2021 02:19:36 +1100 Subject: [PATCH 075/145] Fix up comments showing how to execute config migration. (#11621) --- keyboards/acheron/arctic/chconf.h | 2 +- keyboards/acheron/arctic/mcuconf.h | 2 +- keyboards/acheron/austin/chconf.h | 2 +- keyboards/acheron/austin/halconf.h | 2 +- keyboards/acheron/austin/mcuconf.h | 2 +- keyboards/acheron/keebspcb/chconf.h | 2 +- keyboards/acheron/keebspcb/mcuconf.h | 2 +- keyboards/acheron/lasgweloth/chconf.h | 2 +- keyboards/acheron/lasgweloth/mcuconf.h | 2 +- keyboards/aeboards/ext65/rev2/chconf.h | 2 +- keyboards/aeboards/ext65/rev2/halconf.h | 2 +- keyboards/aeboards/ext65/rev2/mcuconf.h | 2 +- keyboards/ai03/vega/chconf.h | 2 +- keyboards/akegata_denki/device_one/chconf.h | 2 +- keyboards/akegata_denki/device_one/halconf.h | 2 +- keyboards/alpine65/chconf.h | 2 +- keyboards/alpine65/halconf.h | 2 +- keyboards/alpine65/mcuconf.h | 2 +- keyboards/at_at/660m/chconf.h | 2 +- keyboards/at_at/660m/halconf.h | 2 +- keyboards/at_at/660m/mcuconf.h | 2 +- keyboards/box75/chconf.h | 2 +- keyboards/box75/mcuconf.h | 2 +- keyboards/bt66tech/bt66tech60/chconf.h | 2 +- keyboards/bt66tech/bt66tech60/halconf.h | 2 +- keyboards/bt66tech/bt66tech60/mcuconf.h | 2 +- keyboards/cannonkeys/an_c/chconf.h | 2 +- keyboards/cannonkeys/an_c/halconf.h | 2 +- keyboards/cannonkeys/an_c/mcuconf.h | 2 +- keyboards/cannonkeys/atlas/chconf.h | 2 +- keyboards/cannonkeys/atlas/halconf.h | 2 +- keyboards/cannonkeys/atlas/mcuconf.h | 2 +- keyboards/cannonkeys/chimera65/chconf.h | 2 +- keyboards/cannonkeys/chimera65/halconf.h | 2 +- keyboards/cannonkeys/chimera65/mcuconf.h | 2 +- keyboards/cannonkeys/db60/chconf.h | 2 +- keyboards/cannonkeys/db60/halconf.h | 2 +- keyboards/cannonkeys/db60/mcuconf.h | 2 +- keyboards/cannonkeys/devastatingtkl/chconf.h | 2 +- keyboards/cannonkeys/devastatingtkl/halconf.h | 2 +- keyboards/cannonkeys/devastatingtkl/mcuconf.h | 2 +- keyboards/cannonkeys/instant60/chconf.h | 2 +- keyboards/cannonkeys/instant60/halconf.h | 2 +- keyboards/cannonkeys/instant60/mcuconf.h | 2 +- keyboards/cannonkeys/instant65/chconf.h | 2 +- keyboards/cannonkeys/instant65/halconf.h | 2 +- keyboards/cannonkeys/instant65/mcuconf.h | 2 +- keyboards/cannonkeys/iron165/chconf.h | 2 +- keyboards/cannonkeys/iron165/halconf.h | 2 +- keyboards/cannonkeys/iron165/mcuconf.h | 2 +- keyboards/cannonkeys/obliterated75/chconf.h | 2 +- keyboards/cannonkeys/obliterated75/halconf.h | 2 +- keyboards/cannonkeys/obliterated75/mcuconf.h | 2 +- keyboards/cannonkeys/onyx/chconf.h | 2 +- keyboards/cannonkeys/onyx/halconf.h | 2 +- keyboards/cannonkeys/onyx/mcuconf.h | 2 +- keyboards/cannonkeys/ortho48/chconf.h | 2 +- keyboards/cannonkeys/ortho48/halconf.h | 2 +- keyboards/cannonkeys/ortho48/mcuconf.h | 2 +- keyboards/cannonkeys/ortho60/chconf.h | 2 +- keyboards/cannonkeys/ortho60/halconf.h | 2 +- keyboards/cannonkeys/ortho60/mcuconf.h | 2 +- keyboards/cannonkeys/ortho75/chconf.h | 2 +- keyboards/cannonkeys/ortho75/halconf.h | 2 +- keyboards/cannonkeys/ortho75/mcuconf.h | 2 +- keyboards/cannonkeys/practice60/chconf.h | 2 +- keyboards/cannonkeys/practice60/halconf.h | 2 +- keyboards/cannonkeys/practice60/mcuconf.h | 2 +- keyboards/cannonkeys/practice65/chconf.h | 2 +- keyboards/cannonkeys/practice65/halconf.h | 2 +- keyboards/cannonkeys/practice65/mcuconf.h | 2 +- keyboards/cannonkeys/rekt1800/chconf.h | 2 +- keyboards/cannonkeys/rekt1800/halconf.h | 2 +- keyboards/cannonkeys/rekt1800/mcuconf.h | 2 +- keyboards/cannonkeys/sagittarius/chconf.h | 2 +- keyboards/cannonkeys/sagittarius/halconf.h | 2 +- keyboards/cannonkeys/sagittarius/mcuconf.h | 2 +- keyboards/cannonkeys/satisfaction75/chconf.h | 2 +- keyboards/cannonkeys/satisfaction75/halconf.h | 2 +- keyboards/cannonkeys/satisfaction75/mcuconf.h | 2 +- keyboards/cannonkeys/savage65/chconf.h | 2 +- keyboards/cannonkeys/savage65/halconf.h | 2 +- keyboards/cannonkeys/savage65/mcuconf.h | 2 +- keyboards/cannonkeys/tmov2/chconf.h | 2 +- keyboards/cannonkeys/tmov2/halconf.h | 2 +- keyboards/cannonkeys/tmov2/mcuconf.h | 2 +- keyboards/cannonkeys/tsukuyomi/chconf.h | 2 +- keyboards/cannonkeys/tsukuyomi/halconf.h | 2 +- keyboards/cannonkeys/tsukuyomi/mcuconf.h | 2 +- keyboards/chavdai40/chconf.h | 2 +- keyboards/chavdai40/halconf.h | 2 +- keyboards/chavdai40/mcuconf.h | 2 +- keyboards/cheshire/curiosity/chconf.h | 2 +- keyboards/ck60i/chconf.h | 2 +- keyboards/ck60i/halconf.h | 2 +- keyboards/ck60i/mcuconf.h | 2 +- keyboards/clueboard/60/halconf.h | 2 +- keyboards/clueboard/60/mcuconf.h | 2 +- keyboards/clueboard/66/rev4/halconf.h | 2 +- keyboards/clueboard/66/rev4/mcuconf.h | 2 +- keyboards/clueboard/66_hotswap/gen1/halconf.h | 2 +- keyboards/clueboard/66_hotswap/gen1/mcuconf.h | 2 +- keyboards/coarse/cordillera/chconf.h | 2 +- keyboards/coarse/cordillera/halconf.h | 2 +- keyboards/coarse/cordillera/mcuconf.h | 2 +- keyboards/converter/siemens_tastatur/chconf.h | 2 +- keyboards/converter/siemens_tastatur/halconf.h | 2 +- keyboards/cutie_club/borsdorf/chconf.h | 2 +- keyboards/cutie_club/borsdorf/mcuconf.h | 2 +- keyboards/dekunukem/duckypad/chconf.h | 2 +- keyboards/dekunukem/duckypad/halconf.h | 2 +- keyboards/dekunukem/duckypad/mcuconf.h | 2 +- keyboards/ergodox_infinity/chconf.h | 2 +- keyboards/ergodox_infinity/halconf.h | 2 +- keyboards/ergodox_stm32/chconf.h | 2 +- keyboards/ergodox_stm32/halconf.h | 2 +- keyboards/evolv/chconf.h | 2 +- keyboards/evolv/halconf.h | 2 +- keyboards/evolv/mcuconf.h | 2 +- keyboards/function96/chconf.h | 2 +- keyboards/function96/halconf.h | 2 +- keyboards/function96/mcuconf.h | 2 +- keyboards/geekboards/macropad_v2/chconf.h | 2 +- keyboards/geekboards/macropad_v2/halconf.h | 2 +- keyboards/geekboards/macropad_v2/mcuconf.h | 2 +- keyboards/generic_panda/panda65_01/chconf.h | 2 +- keyboards/generic_panda/panda65_01/halconf.h | 2 +- keyboards/generic_panda/panda65_01/mcuconf.h | 2 +- keyboards/hadron/ver3/chconf.h | 2 +- keyboards/hadron/ver3/halconf.h | 2 +- keyboards/hadron/ver3/mcuconf.h | 2 +- keyboards/handwired/ck4x4/chconf.h | 2 +- keyboards/handwired/co60/rev6/halconf.h | 2 +- keyboards/handwired/co60/rev6/mcuconf.h | 2 +- keyboards/handwired/co60/rev7/halconf.h | 2 +- keyboards/handwired/co60/rev7/mcuconf.h | 2 +- keyboards/handwired/onekey/blackpill_f401/chconf.h | 2 +- keyboards/handwired/onekey/blackpill_f411/chconf.h | 2 +- keyboards/handwired/onekey/bluepill/chconf.h | 2 +- keyboards/handwired/onekey/bluepill/halconf.h | 2 +- keyboards/handwired/onekey/bluepill/mcuconf.h | 2 +- keyboards/handwired/onekey/stm32f0_disco/chconf.h | 2 +- keyboards/handwired/onekey/stm32f0_disco/halconf.h | 2 +- keyboards/handwired/onekey/stm32f0_disco/mcuconf.h | 2 +- keyboards/handwired/onekey/teensy_32/chconf.h | 2 +- keyboards/handwired/onekey/teensy_32/halconf.h | 2 +- keyboards/handwired/onekey/teensy_lc/chconf.h | 2 +- keyboards/handwired/onekey/teensy_lc/halconf.h | 2 +- keyboards/handwired/pill60/blackpill_f401/chconf.h | 2 +- keyboards/handwired/pill60/blackpill_f411/chconf.h | 2 +- keyboards/handwired/pill60/bluepill/chconf.h | 2 +- keyboards/handwired/pill60/bluepill/halconf.h | 2 +- keyboards/handwired/pill60/bluepill/mcuconf.h | 2 +- keyboards/handwired/riblee_f401/chconf.h | 2 +- keyboards/handwired/riblee_f401/halconf.h | 2 +- keyboards/handwired/riblee_f411/chconf.h | 2 +- keyboards/handwired/sono1/chconf.h | 2 +- keyboards/handwired/sono1/halconf.h | 2 +- keyboards/handwired/sono1/mcuconf.h | 2 +- keyboards/handwired/steamvan/rev1/halconf.h | 2 +- keyboards/handwired/steamvan/rev1/mcuconf.h | 2 +- keyboards/handwired/t111/chconf.h | 2 +- keyboards/handwired/t111/halconf.h | 2 +- keyboards/handwired/t111/mcuconf.h | 2 +- keyboards/handwired/twadlee/tp69/chconf.h | 2 +- keyboards/handwired/z150/chconf.h | 2 +- keyboards/handwired/z150/halconf.h | 2 +- keyboards/handwired/z150/mcuconf.h | 2 +- keyboards/hs60/v2/halconf.h | 2 +- keyboards/hs60/v2/mcuconf.h | 2 +- keyboards/hub20/chconf.h | 2 +- keyboards/hub20/halconf.h | 2 +- keyboards/hub20/mcuconf.h | 2 +- keyboards/infinity60/chconf.h | 2 +- keyboards/infinity60/halconf.h | 2 +- keyboards/iron180/chconf.h | 2 +- keyboards/iron180/halconf.h | 2 +- keyboards/iron180/mcuconf.h | 2 +- keyboards/jm60/chconf.h | 2 +- keyboards/k_type/chconf.h | 2 +- keyboards/k_type/halconf.h | 2 +- keyboards/keebio/bdn9/rev2/chconf.h | 2 +- keyboards/keebio/bdn9/rev2/halconf.h | 2 +- keyboards/keebio/bdn9/rev2/mcuconf.h | 2 +- keyboards/keebio/choconum/chconf.h | 2 +- keyboards/keebio/choconum/halconf.h | 2 +- keyboards/keebio/choconum/mcuconf.h | 2 +- keyboards/keebwerk/mega/halconf.h | 2 +- keyboards/keebwerk/mega/mcuconf.h | 2 +- keyboards/matrix/m20add/chconf.h | 2 +- keyboards/matrix/m20add/halconf.h | 2 +- keyboards/matrix/noah/chconf.h | 2 +- keyboards/matrix/noah/halconf.h | 2 +- keyboards/misterknife/knife66/chconf.h | 2 +- keyboards/misterknife/knife66/halconf.h | 2 +- keyboards/misterknife/knife66/mcuconf.h | 2 +- keyboards/misterknife/knife66_iso/chconf.h | 2 +- keyboards/misterknife/knife66_iso/halconf.h | 2 +- keyboards/misterknife/knife66_iso/mcuconf.h | 2 +- keyboards/mode/eighty/chconf.h | 2 +- keyboards/mode/eighty/halconf.h | 2 +- keyboards/mode/eighty/mcuconf.h | 2 +- keyboards/nack/mcuconf.h | 2 +- keyboards/nebula12/chconf.h | 2 +- keyboards/nebula12/halconf.h | 2 +- keyboards/nebula12/mcuconf.h | 2 +- keyboards/nebula68/halconf.h | 2 +- keyboards/nebula68/mcuconf.h | 2 +- keyboards/nemui/chconf.h | 2 +- keyboards/nemui/halconf.h | 2 +- keyboards/nemui/mcuconf.h | 2 +- keyboards/nibiria/stream15/chconf.h | 2 +- keyboards/nibiria/stream15/halconf.h | 2 +- keyboards/nibiria/stream15/mcuconf.h | 2 +- keyboards/nk65/halconf.h | 2 +- keyboards/nk65/mcuconf.h | 2 +- keyboards/nk87/halconf.h | 2 +- keyboards/nk87/mcuconf.h | 2 +- keyboards/peiorisboards/ixora/chconf.h | 2 +- keyboards/peiorisboards/ixora/halconf.h | 2 +- keyboards/phoenix/chconf.h | 2 +- keyboards/phoenix/halconf.h | 2 +- keyboards/phoenix/mcuconf.h | 2 +- keyboards/polilla/chconf.h | 2 +- keyboards/polilla/halconf.h | 2 +- keyboards/polilla/mcuconf.h | 2 +- keyboards/primekb/meridian/chconf.h | 2 +- keyboards/primekb/meridian/halconf.h | 2 +- keyboards/primekb/meridian/mcuconf.h | 2 +- keyboards/projectkb/alice/chconf.h | 2 +- keyboards/projectkb/alice/halconf.h | 2 +- keyboards/projectkb/alice/mcuconf.h | 2 +- keyboards/projectkb/signature87/chconf.h | 2 +- keyboards/projectkb/signature87/halconf.h | 2 +- keyboards/projectkb/signature87/mcuconf.h | 2 +- keyboards/ramonimbao/squishy65/chconf.h | 2 +- keyboards/ramonimbao/squishy65/halconf.h | 2 +- keyboards/ramonimbao/squishy65/mcuconf.h | 2 +- keyboards/ramonimbao/wete/chconf.h | 2 +- keyboards/ramonimbao/wete/halconf.h | 2 +- keyboards/ramonimbao/wete/mcuconf.h | 2 +- keyboards/rart/rartlice/chconf.h | 2 +- keyboards/rart/rartlice/halconf.h | 2 +- keyboards/rart/rartlice/mcuconf.h | 2 +- keyboards/retro_75/chconf.h | 2 +- keyboards/rocketboard_16/chconf.h | 2 +- keyboards/rocketboard_16/halconf.h | 2 +- keyboards/rocketboard_16/mcuconf.h | 2 +- keyboards/satt/vision/chconf.h | 2 +- keyboards/satt/vision/mcuconf.h | 2 +- keyboards/technika/chconf.h | 2 +- keyboards/technika/halconf.h | 2 +- keyboards/technika/mcuconf.h | 2 +- keyboards/tkc/candybar/chconf.h | 2 +- keyboards/tkc/godspeed75/chconf.h | 2 +- keyboards/tkw/stoutgat/v2/f411/chconf.h | 2 +- keyboards/tkw/stoutgat/v2/f411/halconf.h | 2 +- keyboards/tkw/stoutgat/v2/f411/mcuconf.h | 2 +- keyboards/viktus/styrka/chconf.h | 2 +- keyboards/vinta/chconf.h | 2 +- keyboards/vinta/halconf.h | 2 +- keyboards/westfoxtrot/prophet/chconf.h | 2 +- keyboards/westfoxtrot/prophet/mcuconf.h | 2 +- keyboards/whitefox/chconf.h | 2 +- keyboards/whitefox/halconf.h | 2 +- keyboards/wolfmarkclub/wm1/chconf.h | 2 +- keyboards/wolfmarkclub/wm1/halconf.h | 2 +- keyboards/wolfmarkclub/wm1/mcuconf.h | 2 +- keyboards/xelus/kangaroo/chconf.h | 2 +- keyboards/xelus/kangaroo/halconf.h | 2 +- keyboards/xelus/kangaroo/mcuconf.h | 2 +- keyboards/xelus/trinityxttkl/chconf.h | 2 +- keyboards/xelus/trinityxttkl/mcuconf.h | 2 +- keyboards/xelus/valor_frl_tkl/chconf.h | 2 +- keyboards/xelus/valor_frl_tkl/halconf.h | 2 +- keyboards/xelus/valor_frl_tkl/mcuconf.h | 2 +- keyboards/xiaomi/mk02/chconf.h | 2 +- keyboards/xiaomi/mk02/halconf.h | 2 +- keyboards/zoo/wampus/chconf.h | 2 +- keyboards/zoo/wampus/halconf.h | 2 +- keyboards/zoo/wampus/mcuconf.h | 2 +- keyboards/zvecr/split_blackpill/chconf.h | 2 +- keyboards/zvecr/split_blackpill/halconf.h | 2 +- keyboards/zvecr/split_blackpill/mcuconf.h | 2 +- keyboards/zvecr/zv48/f401/halconf.h | 2 +- keyboards/zvecr/zv48/f401/mcuconf.h | 2 +- keyboards/zvecr/zv48/f411/halconf.h | 2 +- keyboards/zvecr/zv48/f411/mcuconf.h | 2 +- lib/python/qmk/cli/chibios/confmigrate.py | 2 +- 289 files changed, 289 insertions(+), 289 deletions(-) diff --git a/keyboards/acheron/arctic/chconf.h b/keyboards/acheron/arctic/chconf.h index 78810ead1db..1be94008bf6 100644 --- a/keyboards/acheron/arctic/chconf.h +++ b/keyboards/acheron/arctic/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/arctic/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/arctic/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/acheron/arctic/mcuconf.h b/keyboards/acheron/arctic/mcuconf.h index 7f441ae164f..39dad9031e7 100644 --- a/keyboards/acheron/arctic/mcuconf.h +++ b/keyboards/acheron/arctic/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/arctic/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/arctic/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/acheron/austin/chconf.h b/keyboards/acheron/austin/chconf.h index c132622465b..08567482d59 100644 --- a/keyboards/acheron/austin/chconf.h +++ b/keyboards/acheron/austin/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/austin/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/austin/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/acheron/austin/halconf.h b/keyboards/acheron/austin/halconf.h index 517dd459f23..b707b8b939b 100644 --- a/keyboards/acheron/austin/halconf.h +++ b/keyboards/acheron/austin/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/austin/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/austin/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/acheron/austin/mcuconf.h b/keyboards/acheron/austin/mcuconf.h index 8e51e61bbfa..84cd43b5d89 100644 --- a/keyboards/acheron/austin/mcuconf.h +++ b/keyboards/acheron/austin/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/austin/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/austin/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/acheron/keebspcb/chconf.h b/keyboards/acheron/keebspcb/chconf.h index 3c7eeaac61e..c34640ac025 100644 --- a/keyboards/acheron/keebspcb/chconf.h +++ b/keyboards/acheron/keebspcb/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/keebspcb/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/keebspcb/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/acheron/keebspcb/mcuconf.h b/keyboards/acheron/keebspcb/mcuconf.h index dd29ee9b5d1..74158c86ad1 100644 --- a/keyboards/acheron/keebspcb/mcuconf.h +++ b/keyboards/acheron/keebspcb/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/keebspcb/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/keebspcb/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/acheron/lasgweloth/chconf.h b/keyboards/acheron/lasgweloth/chconf.h index 8a2611726d8..a972edf03c1 100644 --- a/keyboards/acheron/lasgweloth/chconf.h +++ b/keyboards/acheron/lasgweloth/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/lasgweloth/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/lasgweloth/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/acheron/lasgweloth/mcuconf.h b/keyboards/acheron/lasgweloth/mcuconf.h index f4225781851..6e9b3577ef9 100644 --- a/keyboards/acheron/lasgweloth/mcuconf.h +++ b/keyboards/acheron/lasgweloth/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/acheron/lasgweloth/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/acheron/lasgweloth/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/aeboards/ext65/rev2/chconf.h b/keyboards/aeboards/ext65/rev2/chconf.h index 4d6cc3f56ca..4726901050b 100644 --- a/keyboards/aeboards/ext65/rev2/chconf.h +++ b/keyboards/aeboards/ext65/rev2/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/aeboards/ext65/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/aeboards/ext65/rev2/halconf.h b/keyboards/aeboards/ext65/rev2/halconf.h index f6f2e70aba4..6e2f536400a 100644 --- a/keyboards/aeboards/ext65/rev2/halconf.h +++ b/keyboards/aeboards/ext65/rev2/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/aeboards/ext65/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/aeboards/ext65/rev2/mcuconf.h b/keyboards/aeboards/ext65/rev2/mcuconf.h index dda2bda0806..26ce8061509 100644 --- a/keyboards/aeboards/ext65/rev2/mcuconf.h +++ b/keyboards/aeboards/ext65/rev2/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/aeboards/ext65/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/aeboards/ext65/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/ai03/vega/chconf.h b/keyboards/ai03/vega/chconf.h index 34669b16f83..2e0092e3e51 100644 --- a/keyboards/ai03/vega/chconf.h +++ b/keyboards/ai03/vega/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ai03/vega/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ai03/vega/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/akegata_denki/device_one/chconf.h b/keyboards/akegata_denki/device_one/chconf.h index 23eb194e349..d96371e05b6 100644 --- a/keyboards/akegata_denki/device_one/chconf.h +++ b/keyboards/akegata_denki/device_one/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/akegata_denki/device_one/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/akegata_denki/device_one/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/akegata_denki/device_one/halconf.h b/keyboards/akegata_denki/device_one/halconf.h index af54607a9d9..4ca5049db42 100644 --- a/keyboards/akegata_denki/device_one/halconf.h +++ b/keyboards/akegata_denki/device_one/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/akegata_denki/device_one/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/akegata_denki/device_one/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/alpine65/chconf.h b/keyboards/alpine65/chconf.h index f17a54bb967..c3579d10a7b 100644 --- a/keyboards/alpine65/chconf.h +++ b/keyboards/alpine65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/alpine65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/alpine65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/alpine65/halconf.h b/keyboards/alpine65/halconf.h index 96c8fe20354..6e0b9c5de37 100644 --- a/keyboards/alpine65/halconf.h +++ b/keyboards/alpine65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/alpine65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/alpine65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/alpine65/mcuconf.h b/keyboards/alpine65/mcuconf.h index 17f09b3501f..353d7e180ec 100644 --- a/keyboards/alpine65/mcuconf.h +++ b/keyboards/alpine65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/alpine65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/alpine65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/at_at/660m/chconf.h b/keyboards/at_at/660m/chconf.h index dbb520560df..672c3e44c3f 100644 --- a/keyboards/at_at/660m/chconf.h +++ b/keyboards/at_at/660m/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/at_at/660m/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/at_at/660m/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/at_at/660m/halconf.h b/keyboards/at_at/660m/halconf.h index ab884e44dbe..40365804161 100644 --- a/keyboards/at_at/660m/halconf.h +++ b/keyboards/at_at/660m/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/at_at/660m/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/at_at/660m/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/at_at/660m/mcuconf.h b/keyboards/at_at/660m/mcuconf.h index 2f81c14bdd5..27270f33446 100644 --- a/keyboards/at_at/660m/mcuconf.h +++ b/keyboards/at_at/660m/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/at_at/660m/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/at_at/660m/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/box75/chconf.h b/keyboards/box75/chconf.h index 763024f90b0..ca99ad8ccdf 100644 --- a/keyboards/box75/chconf.h +++ b/keyboards/box75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/box75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/box75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/box75/mcuconf.h b/keyboards/box75/mcuconf.h index 9c319a3c736..7c48b087fd1 100644 --- a/keyboards/box75/mcuconf.h +++ b/keyboards/box75/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/box75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/box75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/bt66tech/bt66tech60/chconf.h b/keyboards/bt66tech/bt66tech60/chconf.h index 0a0e97dbade..b0d978988fd 100644 --- a/keyboards/bt66tech/bt66tech60/chconf.h +++ b/keyboards/bt66tech/bt66tech60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/bt66tech/bt66tech60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/bt66tech/bt66tech60/halconf.h b/keyboards/bt66tech/bt66tech60/halconf.h index c19f57b9bee..3e527761cb9 100644 --- a/keyboards/bt66tech/bt66tech60/halconf.h +++ b/keyboards/bt66tech/bt66tech60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/bt66tech/bt66tech60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/bt66tech/bt66tech60/mcuconf.h b/keyboards/bt66tech/bt66tech60/mcuconf.h index b5699553f85..83c9df77781 100644 --- a/keyboards/bt66tech/bt66tech60/mcuconf.h +++ b/keyboards/bt66tech/bt66tech60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/bt66tech/bt66tech60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/bt66tech/bt66tech60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/an_c/chconf.h b/keyboards/cannonkeys/an_c/chconf.h index a928b5b7982..81ebe98fc48 100644 --- a/keyboards/cannonkeys/an_c/chconf.h +++ b/keyboards/cannonkeys/an_c/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/an_c/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/an_c/halconf.h b/keyboards/cannonkeys/an_c/halconf.h index c4b2eb4d619..fddb45ce778 100644 --- a/keyboards/cannonkeys/an_c/halconf.h +++ b/keyboards/cannonkeys/an_c/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/an_c/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/an_c/mcuconf.h b/keyboards/cannonkeys/an_c/mcuconf.h index 9fade649695..11a0d9317b4 100644 --- a/keyboards/cannonkeys/an_c/mcuconf.h +++ b/keyboards/cannonkeys/an_c/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/an_c/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/an_c/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/atlas/chconf.h b/keyboards/cannonkeys/atlas/chconf.h index 2eafdda972c..e4692d9dfff 100644 --- a/keyboards/cannonkeys/atlas/chconf.h +++ b/keyboards/cannonkeys/atlas/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/atlas/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/atlas/halconf.h b/keyboards/cannonkeys/atlas/halconf.h index 4885913a858..fea430acbe9 100644 --- a/keyboards/cannonkeys/atlas/halconf.h +++ b/keyboards/cannonkeys/atlas/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/atlas/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/atlas/mcuconf.h b/keyboards/cannonkeys/atlas/mcuconf.h index a3a3972ba90..075de784167 100644 --- a/keyboards/cannonkeys/atlas/mcuconf.h +++ b/keyboards/cannonkeys/atlas/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/atlas/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/atlas/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/chimera65/chconf.h b/keyboards/cannonkeys/chimera65/chconf.h index 4c0f3da3f41..de89ae272bf 100644 --- a/keyboards/cannonkeys/chimera65/chconf.h +++ b/keyboards/cannonkeys/chimera65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/chimera65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/chimera65/halconf.h b/keyboards/cannonkeys/chimera65/halconf.h index 149ff63aded..f4105c3f882 100644 --- a/keyboards/cannonkeys/chimera65/halconf.h +++ b/keyboards/cannonkeys/chimera65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/chimera65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/chimera65/mcuconf.h b/keyboards/cannonkeys/chimera65/mcuconf.h index 85928a89896..eaf4ee5f7c1 100644 --- a/keyboards/cannonkeys/chimera65/mcuconf.h +++ b/keyboards/cannonkeys/chimera65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/chimera65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/chimera65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/db60/chconf.h b/keyboards/cannonkeys/db60/chconf.h index 05641eee533..0df06ecc127 100644 --- a/keyboards/cannonkeys/db60/chconf.h +++ b/keyboards/cannonkeys/db60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/db60/halconf.h b/keyboards/cannonkeys/db60/halconf.h index 044cd6daeea..de8d8035d04 100644 --- a/keyboards/cannonkeys/db60/halconf.h +++ b/keyboards/cannonkeys/db60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/db60/mcuconf.h b/keyboards/cannonkeys/db60/mcuconf.h index 19322976601..f2212bd2c4f 100644 --- a/keyboards/cannonkeys/db60/mcuconf.h +++ b/keyboards/cannonkeys/db60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/devastatingtkl/chconf.h b/keyboards/cannonkeys/devastatingtkl/chconf.h index 6366e11089d..cc63adc45dd 100644 --- a/keyboards/cannonkeys/devastatingtkl/chconf.h +++ b/keyboards/cannonkeys/devastatingtkl/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/devastatingtkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/devastatingtkl/halconf.h b/keyboards/cannonkeys/devastatingtkl/halconf.h index 296dbe55f5b..4b54302b976 100644 --- a/keyboards/cannonkeys/devastatingtkl/halconf.h +++ b/keyboards/cannonkeys/devastatingtkl/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/devastatingtkl/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/devastatingtkl/mcuconf.h b/keyboards/cannonkeys/devastatingtkl/mcuconf.h index eabe82b77c5..056bf7f58c1 100644 --- a/keyboards/cannonkeys/devastatingtkl/mcuconf.h +++ b/keyboards/cannonkeys/devastatingtkl/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/devastatingtkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/devastatingtkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h index 3bd24c20be4..8c40cd80823 100644 --- a/keyboards/cannonkeys/instant60/chconf.h +++ b/keyboards/cannonkeys/instant60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant60/halconf.h b/keyboards/cannonkeys/instant60/halconf.h index 56635c44f23..0d92a9f425a 100644 --- a/keyboards/cannonkeys/instant60/halconf.h +++ b/keyboards/cannonkeys/instant60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant60/mcuconf.h b/keyboards/cannonkeys/instant60/mcuconf.h index 5d9d4bcc01b..94454d33e33 100644 --- a/keyboards/cannonkeys/instant60/mcuconf.h +++ b/keyboards/cannonkeys/instant60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant65/chconf.h b/keyboards/cannonkeys/instant65/chconf.h index b26cf9a26cb..c82db104154 100644 --- a/keyboards/cannonkeys/instant65/chconf.h +++ b/keyboards/cannonkeys/instant65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant65/halconf.h b/keyboards/cannonkeys/instant65/halconf.h index 89c174e6ca5..5747024fc5f 100644 --- a/keyboards/cannonkeys/instant65/halconf.h +++ b/keyboards/cannonkeys/instant65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/instant65/mcuconf.h b/keyboards/cannonkeys/instant65/mcuconf.h index 649f9c97ddf..eb2f784e60e 100644 --- a/keyboards/cannonkeys/instant65/mcuconf.h +++ b/keyboards/cannonkeys/instant65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/instant65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/instant65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/iron165/chconf.h b/keyboards/cannonkeys/iron165/chconf.h index c78b608f107..69a54bbbb33 100644 --- a/keyboards/cannonkeys/iron165/chconf.h +++ b/keyboards/cannonkeys/iron165/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/iron165/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/iron165/halconf.h b/keyboards/cannonkeys/iron165/halconf.h index c79413423f0..88a995edd05 100644 --- a/keyboards/cannonkeys/iron165/halconf.h +++ b/keyboards/cannonkeys/iron165/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/iron165/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/iron165/mcuconf.h b/keyboards/cannonkeys/iron165/mcuconf.h index 816636b7523..105f34b493b 100644 --- a/keyboards/cannonkeys/iron165/mcuconf.h +++ b/keyboards/cannonkeys/iron165/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/iron165/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/iron165/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/obliterated75/chconf.h b/keyboards/cannonkeys/obliterated75/chconf.h index bff56e52d73..62dc9073219 100644 --- a/keyboards/cannonkeys/obliterated75/chconf.h +++ b/keyboards/cannonkeys/obliterated75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/obliterated75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/obliterated75/halconf.h b/keyboards/cannonkeys/obliterated75/halconf.h index 37f33e7d62b..2d2b93c6594 100644 --- a/keyboards/cannonkeys/obliterated75/halconf.h +++ b/keyboards/cannonkeys/obliterated75/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/obliterated75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/obliterated75/mcuconf.h b/keyboards/cannonkeys/obliterated75/mcuconf.h index 2f0e615ff94..c312b109499 100644 --- a/keyboards/cannonkeys/obliterated75/mcuconf.h +++ b/keyboards/cannonkeys/obliterated75/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/obliterated75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/obliterated75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/onyx/chconf.h b/keyboards/cannonkeys/onyx/chconf.h index 40acee69899..61e5dcb6ab5 100644 --- a/keyboards/cannonkeys/onyx/chconf.h +++ b/keyboards/cannonkeys/onyx/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/onyx/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/onyx/halconf.h b/keyboards/cannonkeys/onyx/halconf.h index be72dfa4cb5..667a2673ad6 100644 --- a/keyboards/cannonkeys/onyx/halconf.h +++ b/keyboards/cannonkeys/onyx/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/onyx/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/onyx/mcuconf.h b/keyboards/cannonkeys/onyx/mcuconf.h index 11a084f4729..96e61127eaf 100644 --- a/keyboards/cannonkeys/onyx/mcuconf.h +++ b/keyboards/cannonkeys/onyx/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/onyx/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/onyx/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho48/chconf.h b/keyboards/cannonkeys/ortho48/chconf.h index 8dbde4e5a4f..a6d89716c2e 100644 --- a/keyboards/cannonkeys/ortho48/chconf.h +++ b/keyboards/cannonkeys/ortho48/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho48/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho48/halconf.h b/keyboards/cannonkeys/ortho48/halconf.h index 7c235fe5811..2d7c06bcba5 100644 --- a/keyboards/cannonkeys/ortho48/halconf.h +++ b/keyboards/cannonkeys/ortho48/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho48/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho48/mcuconf.h b/keyboards/cannonkeys/ortho48/mcuconf.h index 8239c670e96..0de271b8063 100644 --- a/keyboards/cannonkeys/ortho48/mcuconf.h +++ b/keyboards/cannonkeys/ortho48/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho48/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho48/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho60/chconf.h b/keyboards/cannonkeys/ortho60/chconf.h index 88e20f62ea2..c9bc54b433c 100644 --- a/keyboards/cannonkeys/ortho60/chconf.h +++ b/keyboards/cannonkeys/ortho60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho60/halconf.h b/keyboards/cannonkeys/ortho60/halconf.h index f72a3964399..4a56d1da227 100644 --- a/keyboards/cannonkeys/ortho60/halconf.h +++ b/keyboards/cannonkeys/ortho60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho60/mcuconf.h b/keyboards/cannonkeys/ortho60/mcuconf.h index 8597641da6a..6c0b381e4af 100644 --- a/keyboards/cannonkeys/ortho60/mcuconf.h +++ b/keyboards/cannonkeys/ortho60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho75/chconf.h b/keyboards/cannonkeys/ortho75/chconf.h index 60ff8ca92df..512dd7e5f3e 100644 --- a/keyboards/cannonkeys/ortho75/chconf.h +++ b/keyboards/cannonkeys/ortho75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho75/halconf.h b/keyboards/cannonkeys/ortho75/halconf.h index bc62a5a3d93..5add3eeafa8 100644 --- a/keyboards/cannonkeys/ortho75/halconf.h +++ b/keyboards/cannonkeys/ortho75/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/ortho75/mcuconf.h b/keyboards/cannonkeys/ortho75/mcuconf.h index f6748252711..a6b9256b54d 100644 --- a/keyboards/cannonkeys/ortho75/mcuconf.h +++ b/keyboards/cannonkeys/ortho75/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/ortho75/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/ortho75/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice60/chconf.h b/keyboards/cannonkeys/practice60/chconf.h index f52b4a8aeeb..4263e4a41f3 100644 --- a/keyboards/cannonkeys/practice60/chconf.h +++ b/keyboards/cannonkeys/practice60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice60/halconf.h b/keyboards/cannonkeys/practice60/halconf.h index 09ae00a5489..893d07cb2bb 100644 --- a/keyboards/cannonkeys/practice60/halconf.h +++ b/keyboards/cannonkeys/practice60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice60/mcuconf.h b/keyboards/cannonkeys/practice60/mcuconf.h index bd7b8a3595a..60c58da4796 100644 --- a/keyboards/cannonkeys/practice60/mcuconf.h +++ b/keyboards/cannonkeys/practice60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice60/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice65/chconf.h b/keyboards/cannonkeys/practice65/chconf.h index 220ad6436c2..ecf0d046121 100644 --- a/keyboards/cannonkeys/practice65/chconf.h +++ b/keyboards/cannonkeys/practice65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice65/halconf.h b/keyboards/cannonkeys/practice65/halconf.h index 27b46b0f9e6..88ee145cca0 100644 --- a/keyboards/cannonkeys/practice65/halconf.h +++ b/keyboards/cannonkeys/practice65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/practice65/mcuconf.h b/keyboards/cannonkeys/practice65/mcuconf.h index e405bd5a1ae..94266adb524 100644 --- a/keyboards/cannonkeys/practice65/mcuconf.h +++ b/keyboards/cannonkeys/practice65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/practice65/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/practice65/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/rekt1800/chconf.h b/keyboards/cannonkeys/rekt1800/chconf.h index 3b03625ff24..63148d5ce8a 100644 --- a/keyboards/cannonkeys/rekt1800/chconf.h +++ b/keyboards/cannonkeys/rekt1800/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/rekt1800/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/rekt1800/halconf.h b/keyboards/cannonkeys/rekt1800/halconf.h index c065e8fae4c..157fd2105c3 100644 --- a/keyboards/cannonkeys/rekt1800/halconf.h +++ b/keyboards/cannonkeys/rekt1800/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/rekt1800/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/rekt1800/mcuconf.h b/keyboards/cannonkeys/rekt1800/mcuconf.h index d19075da35f..dcae168acf0 100644 --- a/keyboards/cannonkeys/rekt1800/mcuconf.h +++ b/keyboards/cannonkeys/rekt1800/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/rekt1800/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/rekt1800/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/sagittarius/chconf.h b/keyboards/cannonkeys/sagittarius/chconf.h index 46eb3c92770..de42fc7db93 100644 --- a/keyboards/cannonkeys/sagittarius/chconf.h +++ b/keyboards/cannonkeys/sagittarius/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/sagittarius/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/sagittarius/halconf.h b/keyboards/cannonkeys/sagittarius/halconf.h index e993b78a383..decab8a2284 100644 --- a/keyboards/cannonkeys/sagittarius/halconf.h +++ b/keyboards/cannonkeys/sagittarius/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/sagittarius/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/sagittarius/mcuconf.h b/keyboards/cannonkeys/sagittarius/mcuconf.h index e4b9e3df38a..c5e5d280cfb 100644 --- a/keyboards/cannonkeys/sagittarius/mcuconf.h +++ b/keyboards/cannonkeys/sagittarius/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/sagittarius/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/sagittarius/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/satisfaction75/chconf.h b/keyboards/cannonkeys/satisfaction75/chconf.h index 8bd371f8652..fffb7a9053e 100644 --- a/keyboards/cannonkeys/satisfaction75/chconf.h +++ b/keyboards/cannonkeys/satisfaction75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/satisfaction75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/satisfaction75/halconf.h b/keyboards/cannonkeys/satisfaction75/halconf.h index 9ff2015c55d..aed3fef0a83 100644 --- a/keyboards/cannonkeys/satisfaction75/halconf.h +++ b/keyboards/cannonkeys/satisfaction75/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/satisfaction75/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/satisfaction75/mcuconf.h b/keyboards/cannonkeys/satisfaction75/mcuconf.h index 9848bbd87e2..0c84a1e1a8a 100644 --- a/keyboards/cannonkeys/satisfaction75/mcuconf.h +++ b/keyboards/cannonkeys/satisfaction75/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/satisfaction75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/satisfaction75/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/savage65/chconf.h b/keyboards/cannonkeys/savage65/chconf.h index aef07cbc6d1..8329725a740 100644 --- a/keyboards/cannonkeys/savage65/chconf.h +++ b/keyboards/cannonkeys/savage65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/savage65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/savage65/halconf.h b/keyboards/cannonkeys/savage65/halconf.h index 8bcdfe258c2..67a3b4c5a2c 100644 --- a/keyboards/cannonkeys/savage65/halconf.h +++ b/keyboards/cannonkeys/savage65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/savage65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/savage65/mcuconf.h b/keyboards/cannonkeys/savage65/mcuconf.h index c23f7e22d5e..07641fe53a8 100644 --- a/keyboards/cannonkeys/savage65/mcuconf.h +++ b/keyboards/cannonkeys/savage65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/savage65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/savage65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tmov2/chconf.h b/keyboards/cannonkeys/tmov2/chconf.h index ae7c2f3a6ec..4830d0b2793 100644 --- a/keyboards/cannonkeys/tmov2/chconf.h +++ b/keyboards/cannonkeys/tmov2/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tmov2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tmov2/halconf.h b/keyboards/cannonkeys/tmov2/halconf.h index 8aec08db04f..224f68dd01e 100644 --- a/keyboards/cannonkeys/tmov2/halconf.h +++ b/keyboards/cannonkeys/tmov2/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tmov2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tmov2/mcuconf.h b/keyboards/cannonkeys/tmov2/mcuconf.h index 970ed5ba57b..1bfa99b2504 100644 --- a/keyboards/cannonkeys/tmov2/mcuconf.h +++ b/keyboards/cannonkeys/tmov2/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tmov2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tmov2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tsukuyomi/chconf.h b/keyboards/cannonkeys/tsukuyomi/chconf.h index 497df239019..e6cdb876313 100644 --- a/keyboards/cannonkeys/tsukuyomi/chconf.h +++ b/keyboards/cannonkeys/tsukuyomi/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tsukuyomi/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tsukuyomi/halconf.h b/keyboards/cannonkeys/tsukuyomi/halconf.h index b030c0c2c97..ce7635068d8 100644 --- a/keyboards/cannonkeys/tsukuyomi/halconf.h +++ b/keyboards/cannonkeys/tsukuyomi/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tsukuyomi/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cannonkeys/tsukuyomi/mcuconf.h b/keyboards/cannonkeys/tsukuyomi/mcuconf.h index ae8344c24d3..aeea9322ec3 100644 --- a/keyboards/cannonkeys/tsukuyomi/mcuconf.h +++ b/keyboards/cannonkeys/tsukuyomi/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cannonkeys/tsukuyomi/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cannonkeys/tsukuyomi/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/chavdai40/chconf.h b/keyboards/chavdai40/chconf.h index bd6fd35ed92..6304d4f720b 100644 --- a/keyboards/chavdai40/chconf.h +++ b/keyboards/chavdai40/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/chavdai40/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/chavdai40/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/chavdai40/halconf.h b/keyboards/chavdai40/halconf.h index 33dc31edfd3..10d42a2618d 100644 --- a/keyboards/chavdai40/halconf.h +++ b/keyboards/chavdai40/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/chavdai40/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/chavdai40/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/chavdai40/mcuconf.h b/keyboards/chavdai40/mcuconf.h index a73580e0a2e..edc3ce556e2 100644 --- a/keyboards/chavdai40/mcuconf.h +++ b/keyboards/chavdai40/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/chavdai40/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/chavdai40/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/cheshire/curiosity/chconf.h b/keyboards/cheshire/curiosity/chconf.h index 66f906bab62..2782412be35 100644 --- a/keyboards/cheshire/curiosity/chconf.h +++ b/keyboards/cheshire/curiosity/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cheshire/curiosity/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cheshire/curiosity/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ck60i/chconf.h b/keyboards/ck60i/chconf.h index 545a54936be..45f9549e0c7 100644 --- a/keyboards/ck60i/chconf.h +++ b/keyboards/ck60i/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ck60i/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ck60i/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ck60i/halconf.h b/keyboards/ck60i/halconf.h index 0756a1153a6..ac9018dfb13 100644 --- a/keyboards/ck60i/halconf.h +++ b/keyboards/ck60i/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ck60i/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/ck60i/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/ck60i/mcuconf.h b/keyboards/ck60i/mcuconf.h index f6cf5753c80..22c792eaee0 100644 --- a/keyboards/ck60i/mcuconf.h +++ b/keyboards/ck60i/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ck60i/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/ck60i/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/clueboard/60/halconf.h b/keyboards/clueboard/60/halconf.h index e296002a178..644c9c51690 100644 --- a/keyboards/clueboard/60/halconf.h +++ b/keyboards/clueboard/60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/60/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/60/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/clueboard/60/mcuconf.h b/keyboards/clueboard/60/mcuconf.h index 6d2e3e95faa..a5baec5cfed 100644 --- a/keyboards/clueboard/60/mcuconf.h +++ b/keyboards/clueboard/60/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/60/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/60/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/clueboard/66/rev4/halconf.h b/keyboards/clueboard/66/rev4/halconf.h index 4141d194fec..5552de2a31d 100644 --- a/keyboards/clueboard/66/rev4/halconf.h +++ b/keyboards/clueboard/66/rev4/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/66/rev4/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/66/rev4/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/clueboard/66/rev4/mcuconf.h b/keyboards/clueboard/66/rev4/mcuconf.h index 50deefc919f..0fe613b38a1 100644 --- a/keyboards/clueboard/66/rev4/mcuconf.h +++ b/keyboards/clueboard/66/rev4/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/66/rev4/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/66/rev4/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/clueboard/66_hotswap/gen1/halconf.h b/keyboards/clueboard/66_hotswap/gen1/halconf.h index fc3250b4216..9299e624a4c 100644 --- a/keyboards/clueboard/66_hotswap/gen1/halconf.h +++ b/keyboards/clueboard/66_hotswap/gen1/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/66_hotswap/gen1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/66_hotswap/gen1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h index 3aef0f6075f..6377ded8fc1 100644 --- a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h +++ b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/clueboard/66_hotswap/gen1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/clueboard/66_hotswap/gen1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/coarse/cordillera/chconf.h b/keyboards/coarse/cordillera/chconf.h index d200b651485..60aebdea10a 100644 --- a/keyboards/coarse/cordillera/chconf.h +++ b/keyboards/coarse/cordillera/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/coarse/cordillera/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/coarse/cordillera/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/coarse/cordillera/halconf.h b/keyboards/coarse/cordillera/halconf.h index 50f8b19947d..a10baad432f 100644 --- a/keyboards/coarse/cordillera/halconf.h +++ b/keyboards/coarse/cordillera/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/coarse/cordillera/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/coarse/cordillera/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/coarse/cordillera/mcuconf.h b/keyboards/coarse/cordillera/mcuconf.h index 6fcaa5e298c..767251f2f67 100644 --- a/keyboards/coarse/cordillera/mcuconf.h +++ b/keyboards/coarse/cordillera/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/coarse/cordillera/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/coarse/cordillera/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/converter/siemens_tastatur/chconf.h b/keyboards/converter/siemens_tastatur/chconf.h index 2c12943aa7c..2253cfab15f 100644 --- a/keyboards/converter/siemens_tastatur/chconf.h +++ b/keyboards/converter/siemens_tastatur/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/converter/siemens_tastatur/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/converter/siemens_tastatur/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/converter/siemens_tastatur/halconf.h b/keyboards/converter/siemens_tastatur/halconf.h index 3a778cc7c4a..6574014c6a2 100644 --- a/keyboards/converter/siemens_tastatur/halconf.h +++ b/keyboards/converter/siemens_tastatur/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/converter/siemens_tastatur/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/converter/siemens_tastatur/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/cutie_club/borsdorf/chconf.h b/keyboards/cutie_club/borsdorf/chconf.h index 20dd0204306..c5242220b83 100644 --- a/keyboards/cutie_club/borsdorf/chconf.h +++ b/keyboards/cutie_club/borsdorf/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cutie_club/borsdorf/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/cutie_club/borsdorf/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/cutie_club/borsdorf/mcuconf.h b/keyboards/cutie_club/borsdorf/mcuconf.h index 84e0e18b1f5..bf87df5bbda 100644 --- a/keyboards/cutie_club/borsdorf/mcuconf.h +++ b/keyboards/cutie_club/borsdorf/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/cutie_club/borsdorf/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/cutie_club/borsdorf/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h index 9b32262510f..f23a911149f 100644 --- a/keyboards/dekunukem/duckypad/chconf.h +++ b/keyboards/dekunukem/duckypad/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/dekunukem/duckypad/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/dekunukem/duckypad/halconf.h b/keyboards/dekunukem/duckypad/halconf.h index 2934d656caa..b3f9716bb5f 100644 --- a/keyboards/dekunukem/duckypad/halconf.h +++ b/keyboards/dekunukem/duckypad/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/dekunukem/duckypad/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/dekunukem/duckypad/mcuconf.h b/keyboards/dekunukem/duckypad/mcuconf.h index 6f7b7c0f92e..2dca1bea39e 100644 --- a/keyboards/dekunukem/duckypad/mcuconf.h +++ b/keyboards/dekunukem/duckypad/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/dekunukem/duckypad/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/dekunukem/duckypad/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/ergodox_infinity/chconf.h b/keyboards/ergodox_infinity/chconf.h index d04f3dcf6d2..d3860afbe0f 100644 --- a/keyboards/ergodox_infinity/chconf.h +++ b/keyboards/ergodox_infinity/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ergodox_infinity/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ergodox_infinity/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ergodox_infinity/halconf.h b/keyboards/ergodox_infinity/halconf.h index 3e47fc4b810..8c050a2d5ca 100644 --- a/keyboards/ergodox_infinity/halconf.h +++ b/keyboards/ergodox_infinity/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ergodox_infinity/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/ergodox_infinity/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/ergodox_stm32/chconf.h b/keyboards/ergodox_stm32/chconf.h index c4748a07844..e9f16c880e2 100644 --- a/keyboards/ergodox_stm32/chconf.h +++ b/keyboards/ergodox_stm32/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ergodox_stm32/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ergodox_stm32/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ergodox_stm32/halconf.h b/keyboards/ergodox_stm32/halconf.h index ceff43b19dc..71a1596c47b 100644 --- a/keyboards/ergodox_stm32/halconf.h +++ b/keyboards/ergodox_stm32/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ergodox_stm32/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/ergodox_stm32/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/evolv/chconf.h b/keyboards/evolv/chconf.h index c86f723fb43..36fca492f4c 100644 --- a/keyboards/evolv/chconf.h +++ b/keyboards/evolv/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/evolv/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/evolv/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/evolv/halconf.h b/keyboards/evolv/halconf.h index dd7da1bad50..0eeec29dc22 100644 --- a/keyboards/evolv/halconf.h +++ b/keyboards/evolv/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/evolv/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/evolv/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/evolv/mcuconf.h b/keyboards/evolv/mcuconf.h index b9fa5fcdf5d..2836e4b01a7 100644 --- a/keyboards/evolv/mcuconf.h +++ b/keyboards/evolv/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/evolv/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/evolv/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/function96/chconf.h b/keyboards/function96/chconf.h index 50e8338de6a..521da596f15 100644 --- a/keyboards/function96/chconf.h +++ b/keyboards/function96/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/function96/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/function96/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/function96/halconf.h b/keyboards/function96/halconf.h index 91db435e206..9a62a780157 100644 --- a/keyboards/function96/halconf.h +++ b/keyboards/function96/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/function96/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/function96/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/function96/mcuconf.h b/keyboards/function96/mcuconf.h index 0dfc532c249..9eb71be2b3a 100644 --- a/keyboards/function96/mcuconf.h +++ b/keyboards/function96/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/function96/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/function96/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/geekboards/macropad_v2/chconf.h b/keyboards/geekboards/macropad_v2/chconf.h index f34bbc4bdea..aec4640192b 100644 --- a/keyboards/geekboards/macropad_v2/chconf.h +++ b/keyboards/geekboards/macropad_v2/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/geekboards/macropad_v2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/geekboards/macropad_v2/halconf.h b/keyboards/geekboards/macropad_v2/halconf.h index ece95bbc583..2e41c9a60fd 100644 --- a/keyboards/geekboards/macropad_v2/halconf.h +++ b/keyboards/geekboards/macropad_v2/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/geekboards/macropad_v2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/geekboards/macropad_v2/mcuconf.h b/keyboards/geekboards/macropad_v2/mcuconf.h index 7f21a800c0e..8daf054a51d 100644 --- a/keyboards/geekboards/macropad_v2/mcuconf.h +++ b/keyboards/geekboards/macropad_v2/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/geekboards/macropad_v2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/geekboards/macropad_v2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/generic_panda/panda65_01/chconf.h b/keyboards/generic_panda/panda65_01/chconf.h index 94bf6e95810..b53557576ff 100644 --- a/keyboards/generic_panda/panda65_01/chconf.h +++ b/keyboards/generic_panda/panda65_01/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/generic_panda/panda65_01/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/generic_panda/panda65_01/halconf.h b/keyboards/generic_panda/panda65_01/halconf.h index 9ce551f84cc..ec9b882e1aa 100644 --- a/keyboards/generic_panda/panda65_01/halconf.h +++ b/keyboards/generic_panda/panda65_01/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/generic_panda/panda65_01/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/generic_panda/panda65_01/mcuconf.h b/keyboards/generic_panda/panda65_01/mcuconf.h index 74044a9ddbc..fa97fbc23d7 100644 --- a/keyboards/generic_panda/panda65_01/mcuconf.h +++ b/keyboards/generic_panda/panda65_01/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/generic_panda/panda65_01/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/generic_panda/panda65_01/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h index 7e69aaf39b7..a8fb5f91ca6 100644 --- a/keyboards/hadron/ver3/chconf.h +++ b/keyboards/hadron/ver3/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hadron/ver3/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/hadron/ver3/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` */ #pragma once diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h index f89e13f87f9..21eceefcca3 100644 --- a/keyboards/hadron/ver3/halconf.h +++ b/keyboards/hadron/ver3/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hadron/ver3/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/hadron/ver3/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h index 2a629921d76..21dbdf5c7c9 100644 --- a/keyboards/hadron/ver3/mcuconf.h +++ b/keyboards/hadron/ver3/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hadron/ver3/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/hadron/ver3/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/ck4x4/chconf.h b/keyboards/handwired/ck4x4/chconf.h index 0f6a9f60edd..13281bd7681 100644 --- a/keyboards/handwired/ck4x4/chconf.h +++ b/keyboards/handwired/ck4x4/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/ck4x4/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/ck4x4/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/co60/rev6/halconf.h b/keyboards/handwired/co60/rev6/halconf.h index 74035c96173..bd85679fbf9 100644 --- a/keyboards/handwired/co60/rev6/halconf.h +++ b/keyboards/handwired/co60/rev6/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/co60/rev6/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/co60/rev6/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/co60/rev6/mcuconf.h b/keyboards/handwired/co60/rev6/mcuconf.h index bd7745f0de6..24c0720f78d 100644 --- a/keyboards/handwired/co60/rev6/mcuconf.h +++ b/keyboards/handwired/co60/rev6/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/co60/rev6/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/co60/rev6/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/co60/rev7/halconf.h b/keyboards/handwired/co60/rev7/halconf.h index 4a7b8a2cff2..1c0abfd71b4 100644 --- a/keyboards/handwired/co60/rev7/halconf.h +++ b/keyboards/handwired/co60/rev7/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/co60/rev7/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/co60/rev7/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/co60/rev7/mcuconf.h b/keyboards/handwired/co60/rev7/mcuconf.h index abc23383fb9..89e186b63fd 100644 --- a/keyboards/handwired/co60/rev7/mcuconf.h +++ b/keyboards/handwired/co60/rev7/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/co60/rev7/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/co60/rev7/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h index 8f925a66104..69b87423ad6 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h index e9590e1bb08..aa3372fc39e 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/bluepill/chconf.h b/keyboards/handwired/onekey/bluepill/chconf.h index 3d50a97a301..46d8af4a8a7 100644 --- a/keyboards/handwired/onekey/bluepill/chconf.h +++ b/keyboards/handwired/onekey/bluepill/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/bluepill/halconf.h b/keyboards/handwired/onekey/bluepill/halconf.h index 0572697d5c9..956d50f26f9 100644 --- a/keyboards/handwired/onekey/bluepill/halconf.h +++ b/keyboards/handwired/onekey/bluepill/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/bluepill/mcuconf.h b/keyboards/handwired/onekey/bluepill/mcuconf.h index bcd3e2248d3..99525360b3b 100644 --- a/keyboards/handwired/onekey/bluepill/mcuconf.h +++ b/keyboards/handwired/onekey/bluepill/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/stm32f0_disco/chconf.h b/keyboards/handwired/onekey/stm32f0_disco/chconf.h index 67142a2e6f1..cfec50b6e0c 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/chconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/stm32f0_disco/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/stm32f0_disco/halconf.h b/keyboards/handwired/onekey/stm32f0_disco/halconf.h index af0ac7e3397..cb7de673869 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/halconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/stm32f0_disco/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h index cce1daab65d..52d39e4dd4a 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/stm32f0_disco/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/stm32f0_disco/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/teensy_32/chconf.h b/keyboards/handwired/onekey/teensy_32/chconf.h index 3b67dc63f72..c80efff6931 100644 --- a/keyboards/handwired/onekey/teensy_32/chconf.h +++ b/keyboards/handwired/onekey/teensy_32/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_32/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/teensy_32/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/teensy_32/halconf.h b/keyboards/handwired/onekey/teensy_32/halconf.h index 072ea8e46fa..e5019779c7c 100644 --- a/keyboards/handwired/onekey/teensy_32/halconf.h +++ b/keyboards/handwired/onekey/teensy_32/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_32/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/teensy_32/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/teensy_lc/chconf.h b/keyboards/handwired/onekey/teensy_lc/chconf.h index 8c53cb794ba..5be02963caa 100644 --- a/keyboards/handwired/onekey/teensy_lc/chconf.h +++ b/keyboards/handwired/onekey/teensy_lc/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_lc/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/teensy_lc/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/onekey/teensy_lc/halconf.h b/keyboards/handwired/onekey/teensy_lc/halconf.h index db81cd7f62f..bdf1ba4310e 100644 --- a/keyboards/handwired/onekey/teensy_lc/halconf.h +++ b/keyboards/handwired/onekey/teensy_lc/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/onekey/teensy_lc/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/teensy_lc/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h index 600a0a9235a..1664f045c59 100644 --- a/keyboards/handwired/pill60/blackpill_f401/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/pill60/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h index 8fc9c3b8cad..01a052754cb 100644 --- a/keyboards/handwired/pill60/blackpill_f411/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/pill60/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/pill60/bluepill/chconf.h b/keyboards/handwired/pill60/bluepill/chconf.h index 829d921ad2c..883ab46d107 100644 --- a/keyboards/handwired/pill60/bluepill/chconf.h +++ b/keyboards/handwired/pill60/bluepill/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/bluepill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/pill60/bluepill/halconf.h b/keyboards/handwired/pill60/bluepill/halconf.h index 3c9f35fe773..459ec86e2da 100644 --- a/keyboards/handwired/pill60/bluepill/halconf.h +++ b/keyboards/handwired/pill60/bluepill/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/bluepill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/pill60/bluepill/mcuconf.h b/keyboards/handwired/pill60/bluepill/mcuconf.h index d5a0fcda0fe..22f8b02704c 100644 --- a/keyboards/handwired/pill60/bluepill/mcuconf.h +++ b/keyboards/handwired/pill60/bluepill/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/pill60/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/bluepill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h index f868c95219c..275f2b876c3 100644 --- a/keyboards/handwired/riblee_f401/chconf.h +++ b/keyboards/handwired/riblee_f401/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/riblee_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/riblee_f401/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/riblee_f401/halconf.h b/keyboards/handwired/riblee_f401/halconf.h index e53df6faa3e..3c20471df1a 100644 --- a/keyboards/handwired/riblee_f401/halconf.h +++ b/keyboards/handwired/riblee_f401/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/riblee_f401/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/riblee_f401/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h index 649324a9374..7c20b34e7d7 100644 --- a/keyboards/handwired/riblee_f411/chconf.h +++ b/keyboards/handwired/riblee_f411/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/riblee_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/riblee_f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/sono1/chconf.h b/keyboards/handwired/sono1/chconf.h index 4d09f7b7dd5..256dd73f9fc 100644 --- a/keyboards/handwired/sono1/chconf.h +++ b/keyboards/handwired/sono1/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/sono1/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/sono1/halconf.h b/keyboards/handwired/sono1/halconf.h index 0ed8198dc49..71ad5041117 100644 --- a/keyboards/handwired/sono1/halconf.h +++ b/keyboards/handwired/sono1/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/sono1/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/sono1/mcuconf.h b/keyboards/handwired/sono1/mcuconf.h index 6a41e22fed2..cf252da1532 100644 --- a/keyboards/handwired/sono1/mcuconf.h +++ b/keyboards/handwired/sono1/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/sono1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/steamvan/rev1/halconf.h b/keyboards/handwired/steamvan/rev1/halconf.h index f723ba15baa..4779fe572c8 100644 --- a/keyboards/handwired/steamvan/rev1/halconf.h +++ b/keyboards/handwired/steamvan/rev1/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/steamvan/rev1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/steamvan/rev1/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/steamvan/rev1/mcuconf.h b/keyboards/handwired/steamvan/rev1/mcuconf.h index 31e35679314..ac75c8ea4f8 100644 --- a/keyboards/handwired/steamvan/rev1/mcuconf.h +++ b/keyboards/handwired/steamvan/rev1/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/steamvan/rev1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/steamvan/rev1/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/t111/chconf.h b/keyboards/handwired/t111/chconf.h index 25009f53dfd..3dae797c7f6 100644 --- a/keyboards/handwired/t111/chconf.h +++ b/keyboards/handwired/t111/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/t111/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/t111/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/t111/halconf.h b/keyboards/handwired/t111/halconf.h index 50353078419..f2cce49fed1 100644 --- a/keyboards/handwired/t111/halconf.h +++ b/keyboards/handwired/t111/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/t111/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/t111/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/t111/mcuconf.h b/keyboards/handwired/t111/mcuconf.h index 83ec4f33132..3b76a6fb1d5 100644 --- a/keyboards/handwired/t111/mcuconf.h +++ b/keyboards/handwired/t111/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/t111/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/t111/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h index d099106f623..d955082ae17 100644 --- a/keyboards/handwired/twadlee/tp69/chconf.h +++ b/keyboards/handwired/twadlee/tp69/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/twadlee/tp69/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/twadlee/tp69/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/z150/chconf.h b/keyboards/handwired/z150/chconf.h index 875fd83eff7..54f9e834f16 100644 --- a/keyboards/handwired/z150/chconf.h +++ b/keyboards/handwired/z150/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/z150/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/z150/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/handwired/z150/halconf.h b/keyboards/handwired/z150/halconf.h index cea67d99e10..37b172126e3 100644 --- a/keyboards/handwired/z150/halconf.h +++ b/keyboards/handwired/z150/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/z150/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/z150/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/handwired/z150/mcuconf.h b/keyboards/handwired/z150/mcuconf.h index 237bc9fe66a..8567b2628dd 100644 --- a/keyboards/handwired/z150/mcuconf.h +++ b/keyboards/handwired/z150/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/handwired/z150/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/handwired/z150/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/hs60/v2/halconf.h b/keyboards/hs60/v2/halconf.h index 4c4d292f705..fb1d549c623 100644 --- a/keyboards/hs60/v2/halconf.h +++ b/keyboards/hs60/v2/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hs60/v2/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/hs60/v2/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/hs60/v2/mcuconf.h b/keyboards/hs60/v2/mcuconf.h index 59adca2ff06..e6d03f6660f 100644 --- a/keyboards/hs60/v2/mcuconf.h +++ b/keyboards/hs60/v2/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hs60/v2/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/hs60/v2/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/hub20/chconf.h b/keyboards/hub20/chconf.h index 2b80a2f11f2..5e08a4a7a52 100644 --- a/keyboards/hub20/chconf.h +++ b/keyboards/hub20/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hub20/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/hub20/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/hub20/halconf.h b/keyboards/hub20/halconf.h index 2aa6e645222..80669d6dc6f 100644 --- a/keyboards/hub20/halconf.h +++ b/keyboards/hub20/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hub20/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/hub20/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/hub20/mcuconf.h b/keyboards/hub20/mcuconf.h index 11c34e37f88..f783c39b1d2 100644 --- a/keyboards/hub20/mcuconf.h +++ b/keyboards/hub20/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/hub20/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/hub20/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/infinity60/chconf.h b/keyboards/infinity60/chconf.h index 41a4253b28d..3f1f9a8d768 100644 --- a/keyboards/infinity60/chconf.h +++ b/keyboards/infinity60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/infinity60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/infinity60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/infinity60/halconf.h b/keyboards/infinity60/halconf.h index 65511261075..f2a330b4167 100644 --- a/keyboards/infinity60/halconf.h +++ b/keyboards/infinity60/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/infinity60/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/infinity60/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/iron180/chconf.h b/keyboards/iron180/chconf.h index 1b4c060f5fa..1218c8905bd 100644 --- a/keyboards/iron180/chconf.h +++ b/keyboards/iron180/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/iron180/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/iron180/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/iron180/halconf.h b/keyboards/iron180/halconf.h index 733f30da037..2d084142635 100644 --- a/keyboards/iron180/halconf.h +++ b/keyboards/iron180/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/iron180/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/iron180/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/iron180/mcuconf.h b/keyboards/iron180/mcuconf.h index b4fd4cca5e9..3792ceffe7d 100644 --- a/keyboards/iron180/mcuconf.h +++ b/keyboards/iron180/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/iron180/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/iron180/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/jm60/chconf.h b/keyboards/jm60/chconf.h index 94a6d69d191..4f28655fc58 100644 --- a/keyboards/jm60/chconf.h +++ b/keyboards/jm60/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/jm60/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/jm60/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/k_type/chconf.h b/keyboards/k_type/chconf.h index ffa338fe0b3..ae0cce51edc 100644 --- a/keyboards/k_type/chconf.h +++ b/keyboards/k_type/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/k_type/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/k_type/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/k_type/halconf.h b/keyboards/k_type/halconf.h index f618595da5b..c615d9656f7 100644 --- a/keyboards/k_type/halconf.h +++ b/keyboards/k_type/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/k_type/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/k_type/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/keebio/bdn9/rev2/chconf.h b/keyboards/keebio/bdn9/rev2/chconf.h index 75983001bb8..98c1cdf54a2 100644 --- a/keyboards/keebio/bdn9/rev2/chconf.h +++ b/keyboards/keebio/bdn9/rev2/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/bdn9/rev2/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/keebio/bdn9/rev2/halconf.h b/keyboards/keebio/bdn9/rev2/halconf.h index 665d4605d70..c17f632c07c 100644 --- a/keyboards/keebio/bdn9/rev2/halconf.h +++ b/keyboards/keebio/bdn9/rev2/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/bdn9/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/keebio/bdn9/rev2/mcuconf.h b/keyboards/keebio/bdn9/rev2/mcuconf.h index c4a52eb8154..699a5d152b4 100644 --- a/keyboards/keebio/bdn9/rev2/mcuconf.h +++ b/keyboards/keebio/bdn9/rev2/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/bdn9/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/bdn9/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/keebio/choconum/chconf.h b/keyboards/keebio/choconum/chconf.h index 9c1c64e221e..262aa580704 100644 --- a/keyboards/keebio/choconum/chconf.h +++ b/keyboards/keebio/choconum/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/choconum/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/choconum/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/keebio/choconum/halconf.h b/keyboards/keebio/choconum/halconf.h index 899feca0469..f28d16b89c3 100644 --- a/keyboards/keebio/choconum/halconf.h +++ b/keyboards/keebio/choconum/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/choconum/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/choconum/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/keebio/choconum/mcuconf.h b/keyboards/keebio/choconum/mcuconf.h index 41100ac4372..f45cf4dcbab 100644 --- a/keyboards/keebio/choconum/mcuconf.h +++ b/keyboards/keebio/choconum/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebio/choconum/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/keebio/choconum/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/keebwerk/mega/halconf.h b/keyboards/keebwerk/mega/halconf.h index 21d86e12cf7..5e8c697967c 100644 --- a/keyboards/keebwerk/mega/halconf.h +++ b/keyboards/keebwerk/mega/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebwerk/mega/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/keebwerk/mega/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/keebwerk/mega/mcuconf.h b/keyboards/keebwerk/mega/mcuconf.h index 0ac46a5faca..eb9b62fbd34 100644 --- a/keyboards/keebwerk/mega/mcuconf.h +++ b/keyboards/keebwerk/mega/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/keebwerk/mega/mcuconf.h -r platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/keebwerk/mega/mcuconf.h -r platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/matrix/m20add/chconf.h b/keyboards/matrix/m20add/chconf.h index 60dac2fa9e5..e1f154b1eaa 100644 --- a/keyboards/matrix/m20add/chconf.h +++ b/keyboards/matrix/m20add/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/matrix/m20add/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/matrix/m20add/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/matrix/m20add/halconf.h b/keyboards/matrix/m20add/halconf.h index f6da992dea8..00578331999 100644 --- a/keyboards/matrix/m20add/halconf.h +++ b/keyboards/matrix/m20add/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/matrix/m20add/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/matrix/m20add/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h index 44fff871dac..ccf619fdcad 100644 --- a/keyboards/matrix/noah/chconf.h +++ b/keyboards/matrix/noah/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/matrix/noah/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/matrix/noah/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/matrix/noah/halconf.h b/keyboards/matrix/noah/halconf.h index 95de64d898a..2175af02e20 100644 --- a/keyboards/matrix/noah/halconf.h +++ b/keyboards/matrix/noah/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/matrix/noah/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/matrix/noah/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66/chconf.h b/keyboards/misterknife/knife66/chconf.h index 5ac73fa91e2..b19c80a7ba9 100644 --- a/keyboards/misterknife/knife66/chconf.h +++ b/keyboards/misterknife/knife66/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66/halconf.h b/keyboards/misterknife/knife66/halconf.h index 8fa237dcf03..e8ccc3bc5c7 100644 --- a/keyboards/misterknife/knife66/halconf.h +++ b/keyboards/misterknife/knife66/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66/mcuconf.h b/keyboards/misterknife/knife66/mcuconf.h index cb8416efc88..c0c775eaa3d 100644 --- a/keyboards/misterknife/knife66/mcuconf.h +++ b/keyboards/misterknife/knife66/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66_iso/chconf.h b/keyboards/misterknife/knife66_iso/chconf.h index 59695412b1c..1d83a671288 100644 --- a/keyboards/misterknife/knife66_iso/chconf.h +++ b/keyboards/misterknife/knife66_iso/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66_iso/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66_iso/halconf.h b/keyboards/misterknife/knife66_iso/halconf.h index d84bb5294cf..6b22c2c4589 100644 --- a/keyboards/misterknife/knife66_iso/halconf.h +++ b/keyboards/misterknife/knife66_iso/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66_iso/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/misterknife/knife66_iso/mcuconf.h b/keyboards/misterknife/knife66_iso/mcuconf.h index 2355f4f2a0b..0efb4e9e345 100644 --- a/keyboards/misterknife/knife66_iso/mcuconf.h +++ b/keyboards/misterknife/knife66_iso/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/misterknife/knife66_iso/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/misterknife/knife66_iso/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/mode/eighty/chconf.h b/keyboards/mode/eighty/chconf.h index 922db542845..fcc821b3888 100644 --- a/keyboards/mode/eighty/chconf.h +++ b/keyboards/mode/eighty/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/mode/eighty/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/mode/eighty/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/mode/eighty/halconf.h b/keyboards/mode/eighty/halconf.h index 3fac35b587c..eab8a300a16 100644 --- a/keyboards/mode/eighty/halconf.h +++ b/keyboards/mode/eighty/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/mode/eighty/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/mode/eighty/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/mode/eighty/mcuconf.h b/keyboards/mode/eighty/mcuconf.h index 52c077f4400..e1aaa8df3f2 100644 --- a/keyboards/mode/eighty/mcuconf.h +++ b/keyboards/mode/eighty/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/mode/eighty/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/mode/eighty/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nack/mcuconf.h b/keyboards/nack/mcuconf.h index 6d20c18dad6..d2251dbaef6 100644 --- a/keyboards/nack/mcuconf.h +++ b/keyboards/nack/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nack/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nack/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nebula12/chconf.h b/keyboards/nebula12/chconf.h index cb75232d458..e34e007fe83 100644 --- a/keyboards/nebula12/chconf.h +++ b/keyboards/nebula12/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nebula12/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/nebula12/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/nebula12/halconf.h b/keyboards/nebula12/halconf.h index 53821442b9f..e4223dc639f 100644 --- a/keyboards/nebula12/halconf.h +++ b/keyboards/nebula12/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nebula12/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nebula12/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/nebula12/mcuconf.h b/keyboards/nebula12/mcuconf.h index 8611307a784..9d1d693146e 100644 --- a/keyboards/nebula12/mcuconf.h +++ b/keyboards/nebula12/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nebula12/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nebula12/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nebula68/halconf.h b/keyboards/nebula68/halconf.h index 0e01d5b9cbb..faf4d34e651 100644 --- a/keyboards/nebula68/halconf.h +++ b/keyboards/nebula68/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nebula68/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nebula68/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/nebula68/mcuconf.h b/keyboards/nebula68/mcuconf.h index 07679b81a40..8bd404746e1 100644 --- a/keyboards/nebula68/mcuconf.h +++ b/keyboards/nebula68/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nebula68/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nebula68/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nemui/chconf.h b/keyboards/nemui/chconf.h index 068b1193567..2e6e17f1aa9 100644 --- a/keyboards/nemui/chconf.h +++ b/keyboards/nemui/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nemui/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/nemui/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/nemui/halconf.h b/keyboards/nemui/halconf.h index 14ce65aef2d..d9dbc28b72e 100644 --- a/keyboards/nemui/halconf.h +++ b/keyboards/nemui/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nemui/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nemui/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/nemui/mcuconf.h b/keyboards/nemui/mcuconf.h index 955108cab5a..0437c5c935b 100644 --- a/keyboards/nemui/mcuconf.h +++ b/keyboards/nemui/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nemui/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nemui/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nibiria/stream15/chconf.h b/keyboards/nibiria/stream15/chconf.h index 8d5a6b1ce36..257bb696a8c 100644 --- a/keyboards/nibiria/stream15/chconf.h +++ b/keyboards/nibiria/stream15/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nibiria/stream15/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/nibiria/stream15/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/nibiria/stream15/halconf.h b/keyboards/nibiria/stream15/halconf.h index e2d85aeccbb..74b3cbdca47 100644 --- a/keyboards/nibiria/stream15/halconf.h +++ b/keyboards/nibiria/stream15/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nibiria/stream15/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nibiria/stream15/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/nibiria/stream15/mcuconf.h b/keyboards/nibiria/stream15/mcuconf.h index d6d7289fc78..23fcf6f1b25 100644 --- a/keyboards/nibiria/stream15/mcuconf.h +++ b/keyboards/nibiria/stream15/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nibiria/stream15/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nibiria/stream15/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nk65/halconf.h b/keyboards/nk65/halconf.h index a68bb03cda8..e6d7e3c2ed5 100644 --- a/keyboards/nk65/halconf.h +++ b/keyboards/nk65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nk65/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nk65/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/nk65/mcuconf.h b/keyboards/nk65/mcuconf.h index aff96c1c946..f37f37c179c 100644 --- a/keyboards/nk65/mcuconf.h +++ b/keyboards/nk65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nk65/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nk65/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/nk87/halconf.h b/keyboards/nk87/halconf.h index cb517eca3df..fb0c2142644 100644 --- a/keyboards/nk87/halconf.h +++ b/keyboards/nk87/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nk87/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/nk87/halconf.h -r platforms/chibios/QMK_PROTON_C/configs/halconf.h` */ #pragma once diff --git a/keyboards/nk87/mcuconf.h b/keyboards/nk87/mcuconf.h index 42565860c33..1aa2fb55b45 100644 --- a/keyboards/nk87/mcuconf.h +++ b/keyboards/nk87/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/nk87/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/nk87/mcuconf.h -r platforms/chibios/QMK_PROTON_C/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/peiorisboards/ixora/chconf.h b/keyboards/peiorisboards/ixora/chconf.h index e4664d2c6e6..f5aea5228cf 100644 --- a/keyboards/peiorisboards/ixora/chconf.h +++ b/keyboards/peiorisboards/ixora/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/peiorisboards/ixora/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/peiorisboards/ixora/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/peiorisboards/ixora/halconf.h b/keyboards/peiorisboards/ixora/halconf.h index 7a147e3f203..4cd3b288900 100644 --- a/keyboards/peiorisboards/ixora/halconf.h +++ b/keyboards/peiorisboards/ixora/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/peiorisboards/ixora/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/peiorisboards/ixora/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/phoenix/chconf.h b/keyboards/phoenix/chconf.h index c6791a55f86..bf39dba7b2f 100644 --- a/keyboards/phoenix/chconf.h +++ b/keyboards/phoenix/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/phoenix/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/phoenix/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/phoenix/halconf.h b/keyboards/phoenix/halconf.h index f42f063ff97..2527d38940e 100644 --- a/keyboards/phoenix/halconf.h +++ b/keyboards/phoenix/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/phoenix/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/phoenix/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/phoenix/mcuconf.h b/keyboards/phoenix/mcuconf.h index 157081d5cbb..cab1a1537c1 100644 --- a/keyboards/phoenix/mcuconf.h +++ b/keyboards/phoenix/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/phoenix/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/phoenix/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/polilla/chconf.h b/keyboards/polilla/chconf.h index 252acdd4188..86d045b3dac 100644 --- a/keyboards/polilla/chconf.h +++ b/keyboards/polilla/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/polilla/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/polilla/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/polilla/halconf.h b/keyboards/polilla/halconf.h index 01960fd6966..6849a69f207 100644 --- a/keyboards/polilla/halconf.h +++ b/keyboards/polilla/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/polilla/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/polilla/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/polilla/mcuconf.h b/keyboards/polilla/mcuconf.h index 15a04a01e5b..c3ebb04abd2 100644 --- a/keyboards/polilla/mcuconf.h +++ b/keyboards/polilla/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/polilla/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/polilla/mcuconf.h -r platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/primekb/meridian/chconf.h b/keyboards/primekb/meridian/chconf.h index b38862a4062..44182595b0b 100644 --- a/keyboards/primekb/meridian/chconf.h +++ b/keyboards/primekb/meridian/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/primekb/meridian/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/primekb/meridian/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/primekb/meridian/halconf.h b/keyboards/primekb/meridian/halconf.h index 74796d86b06..4ad4a7e6086 100644 --- a/keyboards/primekb/meridian/halconf.h +++ b/keyboards/primekb/meridian/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/primekb/meridian/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/primekb/meridian/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/primekb/meridian/mcuconf.h b/keyboards/primekb/meridian/mcuconf.h index 11a1e902784..e8723438adc 100644 --- a/keyboards/primekb/meridian/mcuconf.h +++ b/keyboards/primekb/meridian/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/primekb/meridian/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/primekb/meridian/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/projectkb/alice/chconf.h b/keyboards/projectkb/alice/chconf.h index 677dd671173..72266cbbb4a 100644 --- a/keyboards/projectkb/alice/chconf.h +++ b/keyboards/projectkb/alice/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/alice/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/projectkb/alice/halconf.h b/keyboards/projectkb/alice/halconf.h index ce8690d849f..b17808ffeb6 100644 --- a/keyboards/projectkb/alice/halconf.h +++ b/keyboards/projectkb/alice/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/alice/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/projectkb/alice/mcuconf.h b/keyboards/projectkb/alice/mcuconf.h index 20bae0682af..4bfc7f94657 100644 --- a/keyboards/projectkb/alice/mcuconf.h +++ b/keyboards/projectkb/alice/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/alice/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/projectkb/signature87/chconf.h b/keyboards/projectkb/signature87/chconf.h index b096de6c995..2b6da6c973b 100644 --- a/keyboards/projectkb/signature87/chconf.h +++ b/keyboards/projectkb/signature87/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/signature87/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/signature87/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/projectkb/signature87/halconf.h b/keyboards/projectkb/signature87/halconf.h index 0e51418a6a4..29ec65a4eed 100644 --- a/keyboards/projectkb/signature87/halconf.h +++ b/keyboards/projectkb/signature87/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/signature87/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/signature87/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/projectkb/signature87/mcuconf.h b/keyboards/projectkb/signature87/mcuconf.h index cbc2922c62e..630bfa7093c 100644 --- a/keyboards/projectkb/signature87/mcuconf.h +++ b/keyboards/projectkb/signature87/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/projectkb/signature87/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/projectkb/signature87/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/squishy65/chconf.h b/keyboards/ramonimbao/squishy65/chconf.h index ec18e90ded6..f9146fe52ff 100644 --- a/keyboards/ramonimbao/squishy65/chconf.h +++ b/keyboards/ramonimbao/squishy65/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/squishy65/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/squishy65/halconf.h b/keyboards/ramonimbao/squishy65/halconf.h index 69865d68c43..4ebba2e53bc 100644 --- a/keyboards/ramonimbao/squishy65/halconf.h +++ b/keyboards/ramonimbao/squishy65/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/squishy65/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/squishy65/mcuconf.h b/keyboards/ramonimbao/squishy65/mcuconf.h index 16d1604cce8..f7ce173262a 100644 --- a/keyboards/ramonimbao/squishy65/mcuconf.h +++ b/keyboards/ramonimbao/squishy65/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/squishy65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/squishy65/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/wete/chconf.h b/keyboards/ramonimbao/wete/chconf.h index 12fc0b5b89a..523ffe46067 100644 --- a/keyboards/ramonimbao/wete/chconf.h +++ b/keyboards/ramonimbao/wete/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/wete/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/wete/halconf.h b/keyboards/ramonimbao/wete/halconf.h index 32847c0a87b..c43440a459f 100644 --- a/keyboards/ramonimbao/wete/halconf.h +++ b/keyboards/ramonimbao/wete/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/wete/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/ramonimbao/wete/mcuconf.h b/keyboards/ramonimbao/wete/mcuconf.h index 1ff77c1fd76..b7f2c481c68 100644 --- a/keyboards/ramonimbao/wete/mcuconf.h +++ b/keyboards/ramonimbao/wete/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/ramonimbao/wete/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/ramonimbao/wete/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/rart/rartlice/chconf.h b/keyboards/rart/rartlice/chconf.h index f052b4fd9f9..5c06b72c88c 100644 --- a/keyboards/rart/rartlice/chconf.h +++ b/keyboards/rart/rartlice/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rart/rartlice/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/rart/rartlice/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/rart/rartlice/halconf.h b/keyboards/rart/rartlice/halconf.h index 437e5a8656c..51f026d49eb 100644 --- a/keyboards/rart/rartlice/halconf.h +++ b/keyboards/rart/rartlice/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rart/rartlice/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/rart/rartlice/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/rart/rartlice/mcuconf.h b/keyboards/rart/rartlice/mcuconf.h index 408ba270ab2..960d0a8f2c7 100644 --- a/keyboards/rart/rartlice/mcuconf.h +++ b/keyboards/rart/rartlice/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rart/rartlice/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/rart/rartlice/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/retro_75/chconf.h b/keyboards/retro_75/chconf.h index ac3b1ebd490..2245de22d1c 100644 --- a/keyboards/retro_75/chconf.h +++ b/keyboards/retro_75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/retro_75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/retro_75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/rocketboard_16/chconf.h b/keyboards/rocketboard_16/chconf.h index 639e35faa08..6b6a8526c07 100644 --- a/keyboards/rocketboard_16/chconf.h +++ b/keyboards/rocketboard_16/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rocketboard_16/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/rocketboard_16/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/rocketboard_16/halconf.h b/keyboards/rocketboard_16/halconf.h index f0751644d6d..e2668391765 100644 --- a/keyboards/rocketboard_16/halconf.h +++ b/keyboards/rocketboard_16/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rocketboard_16/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/rocketboard_16/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/rocketboard_16/mcuconf.h b/keyboards/rocketboard_16/mcuconf.h index e706ab50e4f..5a66f3690ee 100644 --- a/keyboards/rocketboard_16/mcuconf.h +++ b/keyboards/rocketboard_16/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/rocketboard_16/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/rocketboard_16/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/satt/vision/chconf.h b/keyboards/satt/vision/chconf.h index 7cbcecfd390..8ea62c97687 100644 --- a/keyboards/satt/vision/chconf.h +++ b/keyboards/satt/vision/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/satt/vision/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/satt/vision/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/satt/vision/mcuconf.h b/keyboards/satt/vision/mcuconf.h index a4085a792c0..e787f4a1cb1 100644 --- a/keyboards/satt/vision/mcuconf.h +++ b/keyboards/satt/vision/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/satt/vision/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/satt/vision/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/technika/chconf.h b/keyboards/technika/chconf.h index 96a926f3be6..eabb44a1f8e 100644 --- a/keyboards/technika/chconf.h +++ b/keyboards/technika/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/technika/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/technika/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/technika/halconf.h b/keyboards/technika/halconf.h index 8350b86ca55..8f29dc30f74 100644 --- a/keyboards/technika/halconf.h +++ b/keyboards/technika/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/technika/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/technika/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/technika/mcuconf.h b/keyboards/technika/mcuconf.h index b2639511d6b..806a45408a2 100644 --- a/keyboards/technika/mcuconf.h +++ b/keyboards/technika/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/technika/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/technika/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/tkc/candybar/chconf.h b/keyboards/tkc/candybar/chconf.h index ca592d02241..6a1d06e3a41 100644 --- a/keyboards/tkc/candybar/chconf.h +++ b/keyboards/tkc/candybar/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/tkc/candybar/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/tkc/candybar/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/tkc/godspeed75/chconf.h b/keyboards/tkc/godspeed75/chconf.h index ce35f1a868a..1c2fed22872 100644 --- a/keyboards/tkc/godspeed75/chconf.h +++ b/keyboards/tkc/godspeed75/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/tkc/godspeed75/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/tkc/godspeed75/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/tkw/stoutgat/v2/f411/chconf.h b/keyboards/tkw/stoutgat/v2/f411/chconf.h index 531b724ef98..be287db09a2 100644 --- a/keyboards/tkw/stoutgat/v2/f411/chconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/tkw/stoutgat/v2/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/tkw/stoutgat/v2/f411/halconf.h b/keyboards/tkw/stoutgat/v2/f411/halconf.h index 2a01cb3a7ac..0b6f7d5058b 100644 --- a/keyboards/tkw/stoutgat/v2/f411/halconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/tkw/stoutgat/v2/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/tkw/stoutgat/v2/f411/mcuconf.h b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h index d2ce383b55d..00490a92010 100644 --- a/keyboards/tkw/stoutgat/v2/f411/mcuconf.h +++ b/keyboards/tkw/stoutgat/v2/f411/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/tkw/stoutgat/v2/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/tkw/stoutgat/v2/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/viktus/styrka/chconf.h b/keyboards/viktus/styrka/chconf.h index c84a9f8b5f5..76d16808a7a 100644 --- a/keyboards/viktus/styrka/chconf.h +++ b/keyboards/viktus/styrka/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/viktus/styrka/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/viktus/styrka/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/vinta/chconf.h b/keyboards/vinta/chconf.h index 62469b17617..14b19f08d8f 100644 --- a/keyboards/vinta/chconf.h +++ b/keyboards/vinta/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/vinta/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/vinta/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/vinta/halconf.h b/keyboards/vinta/halconf.h index 61632a72d85..66ed246c5d4 100644 --- a/keyboards/vinta/halconf.h +++ b/keyboards/vinta/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/vinta/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/vinta/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/westfoxtrot/prophet/chconf.h b/keyboards/westfoxtrot/prophet/chconf.h index 74da11e5d7f..6a1f54a274a 100644 --- a/keyboards/westfoxtrot/prophet/chconf.h +++ b/keyboards/westfoxtrot/prophet/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/westfoxtrot/prophet/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/westfoxtrot/prophet/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/westfoxtrot/prophet/mcuconf.h b/keyboards/westfoxtrot/prophet/mcuconf.h index 88b4e59805a..2665f9c9e49 100644 --- a/keyboards/westfoxtrot/prophet/mcuconf.h +++ b/keyboards/westfoxtrot/prophet/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/westfoxtrot/prophet/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/westfoxtrot/prophet/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h index 43e3f13bb1a..1860897bb0a 100644 --- a/keyboards/whitefox/chconf.h +++ b/keyboards/whitefox/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/whitefox/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/whitefox/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/whitefox/halconf.h b/keyboards/whitefox/halconf.h index 4ab03a4270e..04a228dc9ee 100644 --- a/keyboards/whitefox/halconf.h +++ b/keyboards/whitefox/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/whitefox/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/whitefox/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/wolfmarkclub/wm1/chconf.h b/keyboards/wolfmarkclub/wm1/chconf.h index 8dfc8d0377b..d4d8b46ae01 100644 --- a/keyboards/wolfmarkclub/wm1/chconf.h +++ b/keyboards/wolfmarkclub/wm1/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/wolfmarkclub/wm1/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/wolfmarkclub/wm1/halconf.h b/keyboards/wolfmarkclub/wm1/halconf.h index c0571400fab..4481979d2d7 100644 --- a/keyboards/wolfmarkclub/wm1/halconf.h +++ b/keyboards/wolfmarkclub/wm1/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/wolfmarkclub/wm1/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/wolfmarkclub/wm1/mcuconf.h b/keyboards/wolfmarkclub/wm1/mcuconf.h index 861603f8252..4374ff39204 100644 --- a/keyboards/wolfmarkclub/wm1/mcuconf.h +++ b/keyboards/wolfmarkclub/wm1/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/wolfmarkclub/wm1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/wolfmarkclub/wm1/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/xelus/kangaroo/chconf.h b/keyboards/xelus/kangaroo/chconf.h index 3457d3bb61f..886a8967965 100644 --- a/keyboards/xelus/kangaroo/chconf.h +++ b/keyboards/xelus/kangaroo/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/xelus/kangaroo/halconf.h b/keyboards/xelus/kangaroo/halconf.h index ba087c7fdfe..633d94a8802 100644 --- a/keyboards/xelus/kangaroo/halconf.h +++ b/keyboards/xelus/kangaroo/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/xelus/kangaroo/mcuconf.h b/keyboards/xelus/kangaroo/mcuconf.h index 885d9f014bb..20db196d29d 100644 --- a/keyboards/xelus/kangaroo/mcuconf.h +++ b/keyboards/xelus/kangaroo/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/xelus/trinityxttkl/chconf.h b/keyboards/xelus/trinityxttkl/chconf.h index 867f495f68e..1d1191ca184 100644 --- a/keyboards/xelus/trinityxttkl/chconf.h +++ b/keyboards/xelus/trinityxttkl/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/trinityxttkl/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/trinityxttkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/xelus/trinityxttkl/mcuconf.h b/keyboards/xelus/trinityxttkl/mcuconf.h index a1b18d56ccc..a3a20cf7d76 100644 --- a/keyboards/xelus/trinityxttkl/mcuconf.h +++ b/keyboards/xelus/trinityxttkl/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/trinityxttkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/trinityxttkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/xelus/valor_frl_tkl/chconf.h b/keyboards/xelus/valor_frl_tkl/chconf.h index d7978e48c20..d30ea0bfe06 100644 --- a/keyboards/xelus/valor_frl_tkl/chconf.h +++ b/keyboards/xelus/valor_frl_tkl/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/valor_frl_tkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/xelus/valor_frl_tkl/halconf.h b/keyboards/xelus/valor_frl_tkl/halconf.h index bb34ba2c72c..1dbf1a4fe00 100644 --- a/keyboards/xelus/valor_frl_tkl/halconf.h +++ b/keyboards/xelus/valor_frl_tkl/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/valor_frl_tkl/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/xelus/valor_frl_tkl/mcuconf.h b/keyboards/xelus/valor_frl_tkl/mcuconf.h index 44af0df3ce8..6013ff13fb1 100644 --- a/keyboards/xelus/valor_frl_tkl/mcuconf.h +++ b/keyboards/xelus/valor_frl_tkl/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xelus/valor_frl_tkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/xelus/valor_frl_tkl/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/xiaomi/mk02/chconf.h b/keyboards/xiaomi/mk02/chconf.h index 9e4ca77e075..28defbc877c 100644 --- a/keyboards/xiaomi/mk02/chconf.h +++ b/keyboards/xiaomi/mk02/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xiaomi/mk02/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/xiaomi/mk02/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/xiaomi/mk02/halconf.h b/keyboards/xiaomi/mk02/halconf.h index 2f56db7c315..31e0799b5dc 100644 --- a/keyboards/xiaomi/mk02/halconf.h +++ b/keyboards/xiaomi/mk02/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/xiaomi/mk02/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/xiaomi/mk02/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/zoo/wampus/chconf.h b/keyboards/zoo/wampus/chconf.h index 05604b0a1e5..3f64f006f56 100644 --- a/keyboards/zoo/wampus/chconf.h +++ b/keyboards/zoo/wampus/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zoo/wampus/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/zoo/wampus/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/zoo/wampus/halconf.h b/keyboards/zoo/wampus/halconf.h index 7ad94d480b2..39499a3ccf0 100644 --- a/keyboards/zoo/wampus/halconf.h +++ b/keyboards/zoo/wampus/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zoo/wampus/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/zoo/wampus/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/zoo/wampus/mcuconf.h b/keyboards/zoo/wampus/mcuconf.h index 6d1148d29e5..775e70e55da 100644 --- a/keyboards/zoo/wampus/mcuconf.h +++ b/keyboards/zoo/wampus/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zoo/wampus/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/zoo/wampus/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/zvecr/split_blackpill/chconf.h b/keyboards/zvecr/split_blackpill/chconf.h index c85f31fcb1d..7b09e5cb861 100644 --- a/keyboards/zvecr/split_blackpill/chconf.h +++ b/keyboards/zvecr/split_blackpill/chconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/chconf.h -r platforms/chibios/common/configs/chconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/split_blackpill/chconf.h -r platforms/chibios/common/configs/chconf.h` */ #pragma once diff --git a/keyboards/zvecr/split_blackpill/halconf.h b/keyboards/zvecr/split_blackpill/halconf.h index 473f46c1420..0ee73f028ad 100644 --- a/keyboards/zvecr/split_blackpill/halconf.h +++ b/keyboards/zvecr/split_blackpill/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/split_blackpill/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/zvecr/split_blackpill/mcuconf.h b/keyboards/zvecr/split_blackpill/mcuconf.h index d93d703d478..01cb4f40f42 100644 --- a/keyboards/zvecr/split_blackpill/mcuconf.h +++ b/keyboards/zvecr/split_blackpill/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/split_blackpill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/split_blackpill/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/zvecr/zv48/f401/halconf.h b/keyboards/zvecr/zv48/f401/halconf.h index 87edd0bb8ba..b42a6939968 100644 --- a/keyboards/zvecr/zv48/f401/halconf.h +++ b/keyboards/zvecr/zv48/f401/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f401/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/zvecr/zv48/f401/mcuconf.h b/keyboards/zvecr/zv48/f401/mcuconf.h index 45010ed36aa..3c14f5e0275 100644 --- a/keyboards/zvecr/zv48/f401/mcuconf.h +++ b/keyboards/zvecr/zv48/f401/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f401/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f401/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h` */ #pragma once diff --git a/keyboards/zvecr/zv48/f411/halconf.h b/keyboards/zvecr/zv48/f411/halconf.h index f959b2f8fa4..3678cd52b51 100644 --- a/keyboards/zvecr/zv48/f411/halconf.h +++ b/keyboards/zvecr/zv48/f411/halconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f411/halconf.h -r platforms/chibios/common/configs/halconf.h` */ #pragma once diff --git a/keyboards/zvecr/zv48/f411/mcuconf.h b/keyboards/zvecr/zv48/f411/mcuconf.h index b70bdf40e80..572a8616cfb 100644 --- a/keyboards/zvecr/zv48/f411/mcuconf.h +++ b/keyboards/zvecr/zv48/f411/mcuconf.h @@ -16,7 +16,7 @@ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i keyboards/zvecr/zv48/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` + * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f411/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h` */ #pragma once diff --git a/lib/python/qmk/cli/chibios/confmigrate.py b/lib/python/qmk/cli/chibios/confmigrate.py index b9cfda96148..9d254885861 100644 --- a/lib/python/qmk/cli/chibios/confmigrate.py +++ b/lib/python/qmk/cli/chibios/confmigrate.py @@ -32,7 +32,7 @@ file_header = """\ /* * This file was auto-generated by: - * `qmk chibios-confupdate -i {0} -r {1}` + * `qmk chibios-confmigrate -i {0} -r {1}` */ #pragma once From 14c2f671cbf4e81336b04eae95933b6fcc2ddcb0 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Tue, 19 Jan 2021 23:27:21 +0000 Subject: [PATCH 076/145] Switch to nano specs on ChibiOS builds - Round 2 (#11607) --- tmk_core/chibios.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 3f426cbb82f..40595a1e3b2 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -312,6 +312,7 @@ LDFLAGS += -mno-thumb-interwork -mthumb LDSYMBOLS =,--defsym=__process_stack_size__=$(USE_PROCESS_STACKSIZE) LDSYMBOLS :=$(LDSYMBOLS),--defsym=__main_stack_size__=$(USE_EXCEPTIONS_STACKSIZE) LDFLAGS += -Wl,--script=$(LDSCRIPT)$(LDSYMBOLS) +LDFLAGS += --specs=nano.specs OPT_DEFS += -DPROTOCOL_CHIBIOS From bdb757e189bf72c0ef382a924328642a629e06d5 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 21 Jan 2021 17:00:53 +1100 Subject: [PATCH 077/145] ChibiOS conf migrations... take 11 (#11646) * Allow forcing re-migration. * ChibiOS conf upgrade for acheron/arctic acheron/arctic - 2aedbe9103fff6c37e596c33c9ed337957647368 * ChibiOS conf upgrade for acheron/austin acheron/austin - c2f4e3b7fc9f1c3d64f47d139bc58367afeca1b7 * ChibiOS conf upgrade for acheron/keebspcb acheron/keebspcb - 1ba976e409732bfa5c0487dd33e20bec06852ce4 * ChibiOS conf upgrade for acheron/lasgweloth acheron/lasgweloth - 01a2e70d0d86de0ff05d0b898a6e3b4428ee1581 * ChibiOS conf upgrade for aeboards/ext65/rev2 aeboards/ext65/rev2 - 3c9a45cafb4ed6d9672aaff4548b105193633a87 * ChibiOS conf upgrade for ai03/vega ai03/vega - 1bd0dfccb99baa69bacd2d55f2bfa72019b8bf80 * ChibiOS conf upgrade for akegata_denki/device_one akegata_denki/device_one - a013823188660f5fca37c5763f160f8646aed7a7 * ChibiOS conf upgrade for at_at/660m at_at/660m - 9999583e8bec2772046132a22818482d24e18c84 * ChibiOS conf upgrade for box75 box75 - 1126206109a942237eea96f3a9608e3c9ed55f8e * ChibiOS conf upgrade for bt66tech/bt66tech60 bt66tech/bt66tech60 - b69120638a8b2c86c008fd0592be918383d8a454 * ChibiOS conf upgrade for cannonkeys/an_c cannonkeys/an_c - c755f6caaccbe2b30d95661a3d441b836534c29f * ChibiOS conf upgrade for cannonkeys/atlas cannonkeys/atlas - 1a18c55492a834b82715516ea4cd4d3d94508743 * ChibiOS conf upgrade for cannonkeys/chimera65 cannonkeys/chimera65 - 6bf226ef353da9106c381a8ac95a9b90529327e5 * ChibiOS conf upgrade for cannonkeys/db60 cannonkeys/db60 - 07e3246f8e3adc5b6918809e6a5aa1ad064b9a09 * ChibiOS conf upgrade for cannonkeys/devastatingtkl cannonkeys/devastatingtkl - 907d258e29eb7e35b1f868c1ea6148bfd1e3a3f2 * ChibiOS conf upgrade for cannonkeys/instant60 cannonkeys/instant60 - ac876ff6746b08839a3936dd4126b52683b763f4 * ChibiOS conf upgrade for cannonkeys/instant65 cannonkeys/instant65 - 3b8c89ec5fecbdb35cccb00c45e64a798528dbda * ChibiOS conf upgrade for cannonkeys/iron165 cannonkeys/iron165 - 0814ec4067d9857b0134e38384f272cf7172fb03 * ChibiOS conf upgrade for cannonkeys/obliterated75 cannonkeys/obliterated75 - 0f376e5d9a232c62e9c60f8fdc81d12732352ddc * ChibiOS conf upgrade for cannonkeys/onyx cannonkeys/onyx - d35134ebe09046b91ab176035d3742d80b23ed8e * ChibiOS conf upgrade for cannonkeys/ortho48 cannonkeys/ortho48 - 828dbfbb013ff4fefe75044b3c9fd31fec5e95a1 * ChibiOS conf upgrade for cannonkeys/ortho60 cannonkeys/ortho60 - 2aca4dd4234e0dac828f5fa15ae5b3bc3c0605dc * ChibiOS conf upgrade for cannonkeys/ortho75 cannonkeys/ortho75 - 4af8aaaded0ff53e9c01473f5968cc169f268647 * ChibiOS conf upgrade for cannonkeys/practice60 cannonkeys/practice60 - e01df551d9483eeb3f825fcc453317fe65f674b5 * ChibiOS conf upgrade for cannonkeys/practice65 cannonkeys/practice65 - 156163789d4c96cdd4787895788c1d02a2367f5c * ChibiOS conf upgrade for cannonkeys/rekt1800 cannonkeys/rekt1800 - 15882afb6373dea3e5f7ed13c19744ee2463f3bf * ChibiOS conf upgrade for cannonkeys/sagittarius cannonkeys/sagittarius - f49fee611ffcc02cb3dc7f249fc8c83f136907b9 * ChibiOS conf upgrade for cannonkeys/satisfaction75 cannonkeys/satisfaction75 - 2c9fbbea3a38820774f6ff436ef51017b545475a * ChibiOS conf upgrade for cannonkeys/savage65 cannonkeys/savage65 - ddd764be363c46f3e9b1a16151bd02d8f66b2dd4 * ChibiOS conf upgrade for cannonkeys/tmov2 cannonkeys/tmov2 - 7af36cd2a42015838b77697624e90008ffa72778 * ChibiOS conf upgrade for cannonkeys/tsukuyomi cannonkeys/tsukuyomi - a120bea5dacb2cd6f143458cece46d2860ea196d * ChibiOS conf upgrade for cheshire/curiosity cheshire/curiosity - 93d8fe3b7a8e028d4b015941ee71b50afe86bc8a * ChibiOS conf upgrade for coarse/cordillera coarse/cordillera - 7d986d3f534786f302cbf74a5e6b7e51ffe60093 * ChibiOS conf upgrade for converter/siemens_tastatur converter/siemens_tastatur - 3f79f1467bbc56f284aceafd76ab5c6a1cbb68f4 * ChibiOS conf upgrade for cutie_club/borsdorf cutie_club/borsdorf - f8c6015b7aacfd5edef4f22f719eea30660005e7 * ChibiOS conf upgrade for dekunukem/duckypad dekunukem/duckypad - d9c162d0867d3925cca2e653a3a3870eac2d23d2 * ChibiOS conf upgrade for ebastler/isometria_75/rev1 ebastler/isometria_75/rev1 - 2ecdd00b8c6cc794a7014747185b88374d5766c0 * ChibiOS conf upgrade for ergodox_infinity ergodox_infinity - 76736c701db22e890764481c25bd38badf32a1cf * ChibiOS conf upgrade for ergodox_stm32 ergodox_stm32 - a7bdb0b7822617ca0f9d316a082874ac0fef5964 * ChibiOS conf upgrade for function96 function96 - 1b9e394a86dab24b85d160afe9281b5e7652afe2 * ChibiOS conf upgrade for geekboards/macropad_v2 geekboards/macropad_v2 - de261e46a42cc7b7ff793e26200669f94b1dbb18 * ChibiOS conf upgrade for generic_panda/panda65_01 generic_panda/panda65_01 - 592d2443033875e0309506aa8cb5212389054458 * ChibiOS conf upgrade for handwired/ck4x4 handwired/ck4x4 - 9d7d4af7f2d787afd638e976334cd37c490040d7 * ChibiOS conf upgrade for handwired/onekey/blackpill_f401 handwired/onekey/blackpill_f401 - c9257a30203b3a0e5aa18b35e07281fcd043ab5d * ChibiOS conf upgrade for handwired/onekey/blackpill_f411 handwired/onekey/blackpill_f411 - dfccc2c6b245cfb561faba60c9f3fc7af8c3db30 * ChibiOS conf upgrade for handwired/onekey/bluepill handwired/onekey/bluepill - 393f4b94e9a0fbc9cd00de1acde346ad72250b4a * ChibiOS conf upgrade for handwired/onekey/stm32f0_disco handwired/onekey/stm32f0_disco - d827881f9bed09fd41c7c4e9d066e96b6643a099 * ChibiOS conf upgrade for handwired/onekey/teensy_32 handwired/onekey/teensy_32 - dd90f6c823da80ba43afa41249a2bdbbab98b04c * ChibiOS conf upgrade for handwired/onekey/teensy_lc handwired/onekey/teensy_lc - 34596f2eeb62403cce532d20cf893ebd77fe2d05 * ChibiOS conf upgrade for handwired/pill60/blackpill_f401 handwired/pill60/blackpill_f401 - 20bbccb5058085076357f4fa956eede2c0af86e8 * ChibiOS conf upgrade for handwired/pill60/blackpill_f411 handwired/pill60/blackpill_f411 - e03a4c3ec3b9ba65b8067126a039a8eb2cd10e51 * ChibiOS conf upgrade for handwired/pill60/bluepill handwired/pill60/bluepill - 2fb721fb4376cde2067eed1c0c8acbf3bf5851c3 * ChibiOS conf upgrade for handwired/riblee_f401 handwired/riblee_f401 - 2823cd98d64c91b146dae343a32176d51772952b * ChibiOS conf upgrade for handwired/riblee_f411 handwired/riblee_f411 - 5cf7589c9a11c4ed14e7d28676ac836fbb07d013 * ChibiOS conf upgrade for handwired/sono1 handwired/sono1 - d972acee03efb4917fc42f7d72c0a416b67ebd4a * ChibiOS conf upgrade for handwired/t111 handwired/t111 - f947c1d59025fe04e7d7b999d80e20277be4366c * ChibiOS conf upgrade for handwired/twadlee/tp69 handwired/twadlee/tp69 - 48ab62464ba1f2651f4468cbec7c6058e3b8c158 * ChibiOS conf upgrade for handwired/z150 handwired/z150 - 35e85696845e965d7f2dcdb372ed20c17d42c2bb * ChibiOS conf upgrade for hub20 hub20 - f094036a182169b5a73f89f09f2ccaa3e5fc9e7e * ChibiOS conf upgrade for iron180 iron180 - 5efb6f21c848b3c964795d9debddceac7628933d * ChibiOS conf upgrade for jm60 jm60 - dbbdbe8b27b3c1d0a25981b2f75728d163d5d299 * ChibiOS conf upgrade for keebio/bdn9/rev2 keebio/bdn9/rev2 - 0031632523dddfc8f7b3a02cf9c5990ebbb3856d * ChibiOS conf upgrade for keebio/choconum keebio/choconum - 4484ef6936a497610ca5ae4d378bc07b2bc1b1c7 * ChibiOS conf upgrade for matrix/m20add matrix/m20add - 6068aeff5b14c26de8838180f4397800abe9f1aa * ChibiOS conf upgrade for matrix/noah matrix/noah - fcde175fb1d3f5bf0716ac5a880c2cc9ab4bbf7f * ChibiOS conf upgrade for misterknife/knife66 misterknife/knife66 - e7f3ceffb94fb8e680da2af27fa7cb1a0a52b699 * ChibiOS conf upgrade for misterknife/knife66_iso misterknife/knife66_iso - ee027db939c098f908f70f02ffa9cc3952139f70 * ChibiOS conf upgrade for nebula12 nebula12 - 2f3a25b6675dcd0fabe75e7bb63038d3cac19610 * ChibiOS conf upgrade for nemui nemui - 4030faa372512f766fd747876cb28176302453f9 * ChibiOS conf upgrade for nibiria/stream15 nibiria/stream15 - fd7b09affa208403099ef9bff1b756fac0d4f918 * ChibiOS conf upgrade for nightingale_studios/hailey nightingale_studios/hailey - 496a44b2f789cc59a6110c7c1c41d57e59c722be * ChibiOS conf upgrade for planck/rev6 planck/rev6 - 6fb8f0bc21b4ab774ce3d339fdf6f25d96059f10 * ChibiOS conf upgrade for primekb/meridian primekb/meridian - 8021ed99e8bdf92faab806780186cc924dd59e50 * ChibiOS conf upgrade for projectkb/alice projectkb/alice - ad7678d475a14c54f28b62d1c1b15f5b4c4448bc * ChibiOS conf upgrade for projectkb/signature87 projectkb/signature87 - de61338b0a5c477f39c000df8117dd3017c2643d * ChibiOS conf upgrade for ramonimbao/squishy65 ramonimbao/squishy65 - 2ea1a8b18c39d0e193bbbf5836191874d3aafc53 * ChibiOS conf upgrade for ramonimbao/wete ramonimbao/wete - a80b3b309f06566adcdf20234d81c1d5aa599b00 * ChibiOS conf upgrade for rart/rartlice rart/rartlice - c8c80c302428d62bb8b08e3185509a233a94f5f0 * ChibiOS conf upgrade for retro_75 retro_75 - 7434e266bba43ded8ca1ff75d77faa506473ca91 * ChibiOS conf upgrade for rocketboard_16 rocketboard_16 - 1182a8730a84b58eba5a470286b6db6134d36f54 * ChibiOS conf upgrade for satt/vision satt/vision - c85a28a8d7e321511a17a7e7084d0a7876d1779a * ChibiOS conf upgrade for technika technika - 7c59de348f0ec5f6ac9e260806a87aaf16fbafa2 * ChibiOS conf upgrade for tkc/godspeed75 tkc/godspeed75 - e447b39dca393736fbf289049699d5b4748bb8c6 * ChibiOS conf upgrade for tkw/stoutgat/v2/f411 tkw/stoutgat/v2/f411 - 58e9b909379ad107affbff0508e3923264b75426 * ChibiOS conf upgrade for viktus/styrka viktus/styrka - 36bf0921be79a8b037fdc25343584574a312be60 * ChibiOS conf upgrade for westfoxtrot/prophet westfoxtrot/prophet - 80036c8f986c8d3261d6b0748d2057eccab6430b * ChibiOS conf upgrade for whitefox whitefox - c9eccac0196c3e2e2ea6c90d3036283a3eabff2c * ChibiOS conf upgrade for wolfmarkclub/wm1 wolfmarkclub/wm1 - 0d22a426255b829a7805bd6a3ff927198b1e31b4 * ChibiOS conf upgrade for xelus/kangaroo xelus/kangaroo - fdb1ffb66f4841f662e968929f058d4fd403c97e * ChibiOS conf upgrade for xelus/trinityxttkl xelus/trinityxttkl - a9641e5b39b7bb38351b9109f0f381837b2e8e79 * ChibiOS conf upgrade for xelus/valor_frl_tkl xelus/valor_frl_tkl - 6c3b577852736a68727ec319c30712b3088e65cd * ChibiOS conf upgrade for xiaomi/mk02 xiaomi/mk02 - 4c1406ebfee73551a844ef7ab29fc5788d7e875c * ChibiOS conf upgrade for zoo/wampus zoo/wampus - 930c903e85478e220a235f45593c03512c66bc2a * ChibiOS conf upgrade for zvecr/split_blackpill zvecr/split_blackpill - c0e3e1583262e4cb0ebfe2efa6356ed6c5c957ca --- keyboards/acheron/arctic/chconf.h | 12 ------- keyboards/acheron/austin/chconf.h | 14 -------- keyboards/acheron/keebspcb/chconf.h | 14 -------- keyboards/acheron/lasgweloth/chconf.h | 12 ------- keyboards/aeboards/ext65/rev2/chconf.h | 12 ------- keyboards/ai03/vega/chconf.h | 14 -------- keyboards/akegata_denki/device_one/chconf.h | 4 --- keyboards/at_at/660m/chconf.h | 14 -------- keyboards/box75/chconf.h | 12 ------- keyboards/bt66tech/bt66tech60/chconf.h | 12 ------- keyboards/cannonkeys/an_c/chconf.h | 14 -------- keyboards/cannonkeys/atlas/chconf.h | 14 -------- keyboards/cannonkeys/chimera65/chconf.h | 14 -------- keyboards/cannonkeys/db60/chconf.h | 14 -------- keyboards/cannonkeys/devastatingtkl/chconf.h | 14 -------- keyboards/cannonkeys/instant60/chconf.h | 14 -------- keyboards/cannonkeys/instant65/chconf.h | 14 -------- keyboards/cannonkeys/iron165/chconf.h | 14 -------- keyboards/cannonkeys/obliterated75/chconf.h | 14 -------- keyboards/cannonkeys/onyx/chconf.h | 2 -- keyboards/cannonkeys/ortho48/chconf.h | 12 ------- keyboards/cannonkeys/ortho60/chconf.h | 12 ------- keyboards/cannonkeys/ortho75/chconf.h | 12 ------- keyboards/cannonkeys/practice60/chconf.h | 12 ------- keyboards/cannonkeys/practice65/chconf.h | 12 ------- keyboards/cannonkeys/rekt1800/chconf.h | 14 -------- keyboards/cannonkeys/sagittarius/chconf.h | 2 -- keyboards/cannonkeys/satisfaction75/chconf.h | 14 -------- keyboards/cannonkeys/savage65/chconf.h | 14 -------- keyboards/cannonkeys/tmov2/chconf.h | 14 -------- keyboards/cannonkeys/tsukuyomi/chconf.h | 14 -------- keyboards/cheshire/curiosity/chconf.h | 12 ------- keyboards/coarse/cordillera/chconf.h | 12 ------- keyboards/converter/siemens_tastatur/chconf.h | 12 ------- keyboards/cutie_club/borsdorf/chconf.h | 2 -- keyboards/dekunukem/duckypad/chconf.h | 12 ------- keyboards/ebastler/isometria_75/rev1/chconf.h | 35 +++++++++++-------- .../ebastler/isometria_75/rev1/halconf.h | 31 +++++++++------- keyboards/ergodox_infinity/chconf.h | 3 +- keyboards/ergodox_stm32/chconf.h | 4 --- keyboards/function96/chconf.h | 14 -------- keyboards/geekboards/macropad_v2/chconf.h | 14 -------- keyboards/generic_panda/panda65_01/chconf.h | 14 -------- keyboards/handwired/ck4x4/chconf.h | 14 -------- .../handwired/onekey/blackpill_f401/chconf.h | 4 --- .../handwired/onekey/blackpill_f401/halconf.h | 32 ++++++++++------- .../handwired/onekey/blackpill_f411/chconf.h | 4 --- .../handwired/onekey/blackpill_f411/halconf.h | 32 ++++++++++------- keyboards/handwired/onekey/bluepill/chconf.h | 12 ------- .../handwired/onekey/stm32f0_disco/chconf.h | 14 -------- keyboards/handwired/onekey/teensy_32/chconf.h | 6 ---- keyboards/handwired/onekey/teensy_lc/chconf.h | 6 ---- .../handwired/pill60/blackpill_f401/chconf.h | 4 --- .../handwired/pill60/blackpill_f401/halconf.h | 32 ++++++++++------- .../handwired/pill60/blackpill_f411/chconf.h | 4 --- .../handwired/pill60/blackpill_f411/halconf.h | 32 ++++++++++------- keyboards/handwired/pill60/bluepill/chconf.h | 12 ------- keyboards/handwired/riblee_f401/chconf.h | 4 --- keyboards/handwired/riblee_f411/chconf.h | 4 --- keyboards/handwired/riblee_f411/halconf.h | 31 +++++++++------- keyboards/handwired/sono1/chconf.h | 12 ------- keyboards/handwired/t111/chconf.h | 12 ------- keyboards/handwired/twadlee/tp69/chconf.h | 6 ---- keyboards/handwired/z150/chconf.h | 12 ------- keyboards/hub20/chconf.h | 2 -- keyboards/iron180/chconf.h | 12 ------- keyboards/jm60/chconf.h | 4 --- keyboards/keebio/bdn9/rev2/chconf.h | 14 -------- keyboards/keebio/choconum/chconf.h | 14 -------- keyboards/matrix/m20add/chconf.h | 4 --- keyboards/matrix/noah/chconf.h | 4 --- keyboards/misterknife/knife66/chconf.h | 14 -------- keyboards/misterknife/knife66_iso/chconf.h | 14 -------- keyboards/nebula12/chconf.h | 14 -------- keyboards/nemui/chconf.h | 14 -------- keyboards/nibiria/stream15/chconf.h | 2 -- keyboards/nightingale_studios/hailey/chconf.h | 19 ---------- .../nightingale_studios/hailey/halconf.h | 26 -------------- keyboards/planck/rev6/chconf.h | 18 +++++++--- keyboards/primekb/meridian/chconf.h | 14 -------- keyboards/projectkb/alice/chconf.h | 14 -------- keyboards/projectkb/signature87/chconf.h | 14 -------- keyboards/ramonimbao/squishy65/chconf.h | 14 -------- keyboards/ramonimbao/wete/chconf.h | 14 -------- keyboards/rart/rartlice/chconf.h | 12 ------- keyboards/retro_75/chconf.h | 12 ------- keyboards/rocketboard_16/chconf.h | 12 ------- keyboards/satt/vision/chconf.h | 14 -------- keyboards/technika/chconf.h | 12 ------- keyboards/tkc/godspeed75/chconf.h | 14 -------- keyboards/tkw/stoutgat/v2/f411/chconf.h | 25 ------------- keyboards/viktus/styrka/chconf.h | 14 -------- keyboards/westfoxtrot/prophet/chconf.h | 14 -------- keyboards/whitefox/chconf.h | 3 +- keyboards/wolfmarkclub/wm1/chconf.h | 12 ------- keyboards/xelus/kangaroo/chconf.h | 14 -------- keyboards/xelus/trinityxttkl/chconf.h | 14 -------- keyboards/xelus/valor_frl_tkl/chconf.h | 14 -------- keyboards/xiaomi/mk02/chconf.h | 2 -- keyboards/zoo/wampus/chconf.h | 12 ------- keyboards/zvecr/split_blackpill/chconf.h | 12 ------- lib/python/qmk/cli/chibios/confmigrate.py | 7 ++-- 102 files changed, 158 insertions(+), 1140 deletions(-) delete mode 100644 keyboards/nightingale_studios/hailey/chconf.h delete mode 100644 keyboards/nightingale_studios/hailey/halconf.h delete mode 100644 keyboards/tkw/stoutgat/v2/f411/chconf.h diff --git a/keyboards/acheron/arctic/chconf.h b/keyboards/acheron/arctic/chconf.h index 1be94008bf6..438ec8ec3ff 100644 --- a/keyboards/acheron/arctic/chconf.h +++ b/keyboards/acheron/arctic/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/acheron/austin/chconf.h b/keyboards/acheron/austin/chconf.h index 08567482d59..35fb8831836 100644 --- a/keyboards/acheron/austin/chconf.h +++ b/keyboards/acheron/austin/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/acheron/keebspcb/chconf.h b/keyboards/acheron/keebspcb/chconf.h index c34640ac025..6801ae9a53c 100644 --- a/keyboards/acheron/keebspcb/chconf.h +++ b/keyboards/acheron/keebspcb/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/acheron/lasgweloth/chconf.h b/keyboards/acheron/lasgweloth/chconf.h index a972edf03c1..94e724a1f29 100644 --- a/keyboards/acheron/lasgweloth/chconf.h +++ b/keyboards/acheron/lasgweloth/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/aeboards/ext65/rev2/chconf.h b/keyboards/aeboards/ext65/rev2/chconf.h index 4726901050b..5af0aad345a 100644 --- a/keyboards/aeboards/ext65/rev2/chconf.h +++ b/keyboards/aeboards/ext65/rev2/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/ai03/vega/chconf.h b/keyboards/ai03/vega/chconf.h index 2e0092e3e51..822691e22dc 100644 --- a/keyboards/ai03/vega/chconf.h +++ b/keyboards/ai03/vega/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/akegata_denki/device_one/chconf.h b/keyboards/akegata_denki/device_one/chconf.h index d96371e05b6..f2cad98952a 100644 --- a/keyboards/akegata_denki/device_one/chconf.h +++ b/keyboards/akegata_denki/device_one/chconf.h @@ -33,8 +33,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_MEMPOOLS TRUE @@ -45,8 +43,6 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/at_at/660m/chconf.h b/keyboards/at_at/660m/chconf.h index 672c3e44c3f..49649adb343 100644 --- a/keyboards/at_at/660m/chconf.h +++ b/keyboards/at_at/660m/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/box75/chconf.h b/keyboards/box75/chconf.h index ca99ad8ccdf..769b29f22cf 100644 --- a/keyboards/box75/chconf.h +++ b/keyboards/box75/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/bt66tech/bt66tech60/chconf.h b/keyboards/bt66tech/bt66tech60/chconf.h index b0d978988fd..93c4ebe4052 100644 --- a/keyboards/bt66tech/bt66tech60/chconf.h +++ b/keyboards/bt66tech/bt66tech60/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/an_c/chconf.h b/keyboards/cannonkeys/an_c/chconf.h index 81ebe98fc48..0f07a8ba95d 100644 --- a/keyboards/cannonkeys/an_c/chconf.h +++ b/keyboards/cannonkeys/an_c/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/atlas/chconf.h b/keyboards/cannonkeys/atlas/chconf.h index e4692d9dfff..1b3da00c023 100644 --- a/keyboards/cannonkeys/atlas/chconf.h +++ b/keyboards/cannonkeys/atlas/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/chimera65/chconf.h b/keyboards/cannonkeys/chimera65/chconf.h index de89ae272bf..644ca1c1c39 100644 --- a/keyboards/cannonkeys/chimera65/chconf.h +++ b/keyboards/cannonkeys/chimera65/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/db60/chconf.h b/keyboards/cannonkeys/db60/chconf.h index 0df06ecc127..9f541944f81 100644 --- a/keyboards/cannonkeys/db60/chconf.h +++ b/keyboards/cannonkeys/db60/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/devastatingtkl/chconf.h b/keyboards/cannonkeys/devastatingtkl/chconf.h index cc63adc45dd..677ee1388f6 100644 --- a/keyboards/cannonkeys/devastatingtkl/chconf.h +++ b/keyboards/cannonkeys/devastatingtkl/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h index 8c40cd80823..ac649b27db1 100644 --- a/keyboards/cannonkeys/instant60/chconf.h +++ b/keyboards/cannonkeys/instant60/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/instant65/chconf.h b/keyboards/cannonkeys/instant65/chconf.h index c82db104154..91f1ae9c086 100644 --- a/keyboards/cannonkeys/instant65/chconf.h +++ b/keyboards/cannonkeys/instant65/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/iron165/chconf.h b/keyboards/cannonkeys/iron165/chconf.h index 69a54bbbb33..7c6af767fa1 100644 --- a/keyboards/cannonkeys/iron165/chconf.h +++ b/keyboards/cannonkeys/iron165/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/obliterated75/chconf.h b/keyboards/cannonkeys/obliterated75/chconf.h index 62dc9073219..645412d47c6 100644 --- a/keyboards/cannonkeys/obliterated75/chconf.h +++ b/keyboards/cannonkeys/obliterated75/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/onyx/chconf.h b/keyboards/cannonkeys/onyx/chconf.h index 61e5dcb6ab5..40aa1fd9ba7 100644 --- a/keyboards/cannonkeys/onyx/chconf.h +++ b/keyboards/cannonkeys/onyx/chconf.h @@ -37,7 +37,5 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #include_next diff --git a/keyboards/cannonkeys/ortho48/chconf.h b/keyboards/cannonkeys/ortho48/chconf.h index a6d89716c2e..583eb9febf0 100644 --- a/keyboards/cannonkeys/ortho48/chconf.h +++ b/keyboards/cannonkeys/ortho48/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/ortho60/chconf.h b/keyboards/cannonkeys/ortho60/chconf.h index c9bc54b433c..ae16c0f7478 100644 --- a/keyboards/cannonkeys/ortho60/chconf.h +++ b/keyboards/cannonkeys/ortho60/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/ortho75/chconf.h b/keyboards/cannonkeys/ortho75/chconf.h index 512dd7e5f3e..2bf13952d94 100644 --- a/keyboards/cannonkeys/ortho75/chconf.h +++ b/keyboards/cannonkeys/ortho75/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/practice60/chconf.h b/keyboards/cannonkeys/practice60/chconf.h index 4263e4a41f3..ddf9c24df7d 100644 --- a/keyboards/cannonkeys/practice60/chconf.h +++ b/keyboards/cannonkeys/practice60/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/practice65/chconf.h b/keyboards/cannonkeys/practice65/chconf.h index ecf0d046121..0f412cfbf4e 100644 --- a/keyboards/cannonkeys/practice65/chconf.h +++ b/keyboards/cannonkeys/practice65/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/rekt1800/chconf.h b/keyboards/cannonkeys/rekt1800/chconf.h index 63148d5ce8a..6df38c65277 100644 --- a/keyboards/cannonkeys/rekt1800/chconf.h +++ b/keyboards/cannonkeys/rekt1800/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/sagittarius/chconf.h b/keyboards/cannonkeys/sagittarius/chconf.h index de42fc7db93..f94932c6e7f 100644 --- a/keyboards/cannonkeys/sagittarius/chconf.h +++ b/keyboards/cannonkeys/sagittarius/chconf.h @@ -37,7 +37,5 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #include_next diff --git a/keyboards/cannonkeys/satisfaction75/chconf.h b/keyboards/cannonkeys/satisfaction75/chconf.h index fffb7a9053e..ca4a976c27c 100644 --- a/keyboards/cannonkeys/satisfaction75/chconf.h +++ b/keyboards/cannonkeys/satisfaction75/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/savage65/chconf.h b/keyboards/cannonkeys/savage65/chconf.h index 8329725a740..f3eb1c05e53 100644 --- a/keyboards/cannonkeys/savage65/chconf.h +++ b/keyboards/cannonkeys/savage65/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/tmov2/chconf.h b/keyboards/cannonkeys/tmov2/chconf.h index 4830d0b2793..6cc4e27c10b 100644 --- a/keyboards/cannonkeys/tmov2/chconf.h +++ b/keyboards/cannonkeys/tmov2/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cannonkeys/tsukuyomi/chconf.h b/keyboards/cannonkeys/tsukuyomi/chconf.h index e6cdb876313..7239dcafc8d 100644 --- a/keyboards/cannonkeys/tsukuyomi/chconf.h +++ b/keyboards/cannonkeys/tsukuyomi/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cheshire/curiosity/chconf.h b/keyboards/cheshire/curiosity/chconf.h index 2782412be35..daed31812bc 100644 --- a/keyboards/cheshire/curiosity/chconf.h +++ b/keyboards/cheshire/curiosity/chconf.h @@ -25,20 +25,8 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/coarse/cordillera/chconf.h b/keyboards/coarse/cordillera/chconf.h index 60aebdea10a..4f9d43325f0 100644 --- a/keyboards/coarse/cordillera/chconf.h +++ b/keyboards/coarse/cordillera/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/converter/siemens_tastatur/chconf.h b/keyboards/converter/siemens_tastatur/chconf.h index 2253cfab15f..eed5776e778 100644 --- a/keyboards/converter/siemens_tastatur/chconf.h +++ b/keyboards/converter/siemens_tastatur/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/cutie_club/borsdorf/chconf.h b/keyboards/cutie_club/borsdorf/chconf.h index c5242220b83..7005cf23402 100644 --- a/keyboards/cutie_club/borsdorf/chconf.h +++ b/keyboards/cutie_club/borsdorf/chconf.h @@ -37,7 +37,5 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #include_next diff --git a/keyboards/dekunukem/duckypad/chconf.h b/keyboards/dekunukem/duckypad/chconf.h index f23a911149f..2d1b7a3bf4b 100644 --- a/keyboards/dekunukem/duckypad/chconf.h +++ b/keyboards/dekunukem/duckypad/chconf.h @@ -25,20 +25,8 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/ebastler/isometria_75/rev1/chconf.h b/keyboards/ebastler/isometria_75/rev1/chconf.h index 58a9736f127..1716aa6cca9 100644 --- a/keyboards/ebastler/isometria_75/rev1/chconf.h +++ b/keyboards/ebastler/isometria_75/rev1/chconf.h @@ -1,22 +1,29 @@ -/* Copyright 2020 Moritz Plattner (ebastler) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/ebastler/isometria_75/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + #pragma once -/* Change system timer resolution, because TIM2 and TIM3 are different */ -#define CH_CFG_ST_RESOLUTION 16 -#define CH_CFG_INTERVALS_SIZE 16 +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_INTERVALS_SIZE 16 #include_next + diff --git a/keyboards/ebastler/isometria_75/rev1/halconf.h b/keyboards/ebastler/isometria_75/rev1/halconf.h index 463f9accbfd..6fbac77afbf 100644 --- a/keyboards/ebastler/isometria_75/rev1/halconf.h +++ b/keyboards/ebastler/isometria_75/rev1/halconf.h @@ -1,20 +1,27 @@ -/* Copyright 2020 Moritz Plattner (ebastler) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/ebastler/isometria_75/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_PWM TRUE -#include_next \ No newline at end of file +#include_next + diff --git a/keyboards/ergodox_infinity/chconf.h b/keyboards/ergodox_infinity/chconf.h index d3860afbe0f..710d8aa437c 100644 --- a/keyboards/ergodox_infinity/chconf.h +++ b/keyboards/ergodox_infinity/chconf.h @@ -29,10 +29,9 @@ #define CH_CFG_USE_WAITEXIT TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_DYNAMIC TRUE #include_next + diff --git a/keyboards/ergodox_stm32/chconf.h b/keyboards/ergodox_stm32/chconf.h index e9f16c880e2..bc3672f6f73 100644 --- a/keyboards/ergodox_stm32/chconf.h +++ b/keyboards/ergodox_stm32/chconf.h @@ -35,8 +35,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_MEMPOOLS TRUE @@ -47,8 +45,6 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/function96/chconf.h b/keyboards/function96/chconf.h index 521da596f15..c8e4b98ad29 100644 --- a/keyboards/function96/chconf.h +++ b/keyboards/function96/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/geekboards/macropad_v2/chconf.h b/keyboards/geekboards/macropad_v2/chconf.h index aec4640192b..13cb5645d90 100644 --- a/keyboards/geekboards/macropad_v2/chconf.h +++ b/keyboards/geekboards/macropad_v2/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/generic_panda/panda65_01/chconf.h b/keyboards/generic_panda/panda65_01/chconf.h index b53557576ff..847f2cc284f 100644 --- a/keyboards/generic_panda/panda65_01/chconf.h +++ b/keyboards/generic_panda/panda65_01/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/ck4x4/chconf.h b/keyboards/handwired/ck4x4/chconf.h index 13281bd7681..524edbe8fde 100644 --- a/keyboards/handwired/ck4x4/chconf.h +++ b/keyboards/handwired/ck4x4/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/onekey/blackpill_f401/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h index 69b87423ad6..de4ab83ec36 100644 --- a/keyboards/handwired/onekey/blackpill_f401/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/onekey/blackpill_f401/halconf.h b/keyboards/handwired/onekey/blackpill_f401/halconf.h index ae08512d492..878879db1e2 100644 --- a/keyboards/handwired/onekey/blackpill_f401/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f401/halconf.h @@ -1,21 +1,29 @@ -/* Copyright 2020 Nick Brassel (tzarc) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f401/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_I2C TRUE + #define HAL_USE_PWM TRUE -#include_next "halconf.h" +#include_next + diff --git a/keyboards/handwired/onekey/blackpill_f411/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h index aa3372fc39e..4ecd0f52a27 100644 --- a/keyboards/handwired/onekey/blackpill_f411/chconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411/halconf.h b/keyboards/handwired/onekey/blackpill_f411/halconf.h index ae08512d492..d54f2a26acf 100644 --- a/keyboards/handwired/onekey/blackpill_f411/halconf.h +++ b/keyboards/handwired/onekey/blackpill_f411/halconf.h @@ -1,21 +1,29 @@ -/* Copyright 2020 Nick Brassel (tzarc) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_I2C TRUE + #define HAL_USE_PWM TRUE -#include_next "halconf.h" +#include_next + diff --git a/keyboards/handwired/onekey/bluepill/chconf.h b/keyboards/handwired/onekey/bluepill/chconf.h index 46d8af4a8a7..c7a982aedd0 100644 --- a/keyboards/handwired/onekey/bluepill/chconf.h +++ b/keyboards/handwired/onekey/bluepill/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/onekey/stm32f0_disco/chconf.h b/keyboards/handwired/onekey/stm32f0_disco/chconf.h index cfec50b6e0c..33ceb1431ef 100644 --- a/keyboards/handwired/onekey/stm32f0_disco/chconf.h +++ b/keyboards/handwired/onekey/stm32f0_disco/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/onekey/teensy_32/chconf.h b/keyboards/handwired/onekey/teensy_32/chconf.h index c80efff6931..199e8d05bd9 100644 --- a/keyboards/handwired/onekey/teensy_32/chconf.h +++ b/keyboards/handwired/onekey/teensy_32/chconf.h @@ -27,12 +27,6 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/onekey/teensy_lc/chconf.h b/keyboards/handwired/onekey/teensy_lc/chconf.h index 5be02963caa..cfcced3cf74 100644 --- a/keyboards/handwired/onekey/teensy_lc/chconf.h +++ b/keyboards/handwired/onekey/teensy_lc/chconf.h @@ -27,12 +27,6 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h index 1664f045c59..c10f1f287a2 100644 --- a/keyboards/handwired/pill60/blackpill_f401/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/pill60/blackpill_f401/halconf.h b/keyboards/handwired/pill60/blackpill_f401/halconf.h index f1230634b6c..1e126a8656a 100644 --- a/keyboards/handwired/pill60/blackpill_f401/halconf.h +++ b/keyboards/handwired/pill60/blackpill_f401/halconf.h @@ -1,21 +1,29 @@ -/* Copyright 2020 Nick Brassel (tzarc) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/blackpill_f401/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_I2C TRUE + #define HAL_USE_PWM TRUE -#include_next "halconf.h" \ No newline at end of file +#include_next + diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h index 01a052754cb..fb7536cebb0 100644 --- a/keyboards/handwired/pill60/blackpill_f411/chconf.h +++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/pill60/blackpill_f411/halconf.h b/keyboards/handwired/pill60/blackpill_f411/halconf.h index f1230634b6c..435bf3274e9 100644 --- a/keyboards/handwired/pill60/blackpill_f411/halconf.h +++ b/keyboards/handwired/pill60/blackpill_f411/halconf.h @@ -1,21 +1,29 @@ -/* Copyright 2020 Nick Brassel (tzarc) +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/pill60/blackpill_f411/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_I2C TRUE + #define HAL_USE_PWM TRUE -#include_next "halconf.h" \ No newline at end of file +#include_next + diff --git a/keyboards/handwired/pill60/bluepill/chconf.h b/keyboards/handwired/pill60/bluepill/chconf.h index 883ab46d107..c92d2a276de 100644 --- a/keyboards/handwired/pill60/bluepill/chconf.h +++ b/keyboards/handwired/pill60/bluepill/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h index 275f2b876c3..3b48fc5cdf0 100644 --- a/keyboards/handwired/riblee_f401/chconf.h +++ b/keyboards/handwired/riblee_f401/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h index 7c20b34e7d7..36199f64977 100644 --- a/keyboards/handwired/riblee_f411/chconf.h +++ b/keyboards/handwired/riblee_f411/chconf.h @@ -23,10 +23,6 @@ #define CH_CFG_ST_FREQUENCY 10000 -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/riblee_f411/halconf.h b/keyboards/handwired/riblee_f411/halconf.h index d65408a1b62..6084293ff14 100644 --- a/keyboards/handwired/riblee_f411/halconf.h +++ b/keyboards/handwired/riblee_f411/halconf.h @@ -1,20 +1,27 @@ -/* Copyright 2020 Janos Daniel Reibl @riblee +/* Copyright 2020 QMK * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/handwired/riblee_f411/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + #pragma once #define HAL_USE_I2C TRUE -#include_next "halconf.h" +#include_next + diff --git a/keyboards/handwired/sono1/chconf.h b/keyboards/handwired/sono1/chconf.h index 256dd73f9fc..f2330f083c6 100644 --- a/keyboards/handwired/sono1/chconf.h +++ b/keyboards/handwired/sono1/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/t111/chconf.h b/keyboards/handwired/t111/chconf.h index 3dae797c7f6..962653ec4c6 100644 --- a/keyboards/handwired/t111/chconf.h +++ b/keyboards/handwired/t111/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/handwired/twadlee/tp69/chconf.h b/keyboards/handwired/twadlee/tp69/chconf.h index d955082ae17..6b35146c741 100644 --- a/keyboards/handwired/twadlee/tp69/chconf.h +++ b/keyboards/handwired/twadlee/tp69/chconf.h @@ -27,12 +27,6 @@ #define CH_CFG_TIME_QUANTUM 20 -#define CH_CFG_USE_TM FALSE - -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/handwired/z150/chconf.h b/keyboards/handwired/z150/chconf.h index 54f9e834f16..975667df0e2 100644 --- a/keyboards/handwired/z150/chconf.h +++ b/keyboards/handwired/z150/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/hub20/chconf.h b/keyboards/hub20/chconf.h index 5e08a4a7a52..3ac13450685 100644 --- a/keyboards/hub20/chconf.h +++ b/keyboards/hub20/chconf.h @@ -37,7 +37,5 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #include_next diff --git a/keyboards/iron180/chconf.h b/keyboards/iron180/chconf.h index 1218c8905bd..1a57dca36b8 100644 --- a/keyboards/iron180/chconf.h +++ b/keyboards/iron180/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/jm60/chconf.h b/keyboards/jm60/chconf.h index 4f28655fc58..5bceae30abe 100644 --- a/keyboards/jm60/chconf.h +++ b/keyboards/jm60/chconf.h @@ -35,8 +35,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_MEMPOOLS TRUE @@ -47,8 +45,6 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/keebio/bdn9/rev2/chconf.h b/keyboards/keebio/bdn9/rev2/chconf.h index 98c1cdf54a2..7b1933eb1a9 100644 --- a/keyboards/keebio/bdn9/rev2/chconf.h +++ b/keyboards/keebio/bdn9/rev2/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/keebio/choconum/chconf.h b/keyboards/keebio/choconum/chconf.h index 262aa580704..350362ccb7f 100644 --- a/keyboards/keebio/choconum/chconf.h +++ b/keyboards/keebio/choconum/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/matrix/m20add/chconf.h b/keyboards/matrix/m20add/chconf.h index e1f154b1eaa..b2c8dec67f4 100644 --- a/keyboards/matrix/m20add/chconf.h +++ b/keyboards/matrix/m20add/chconf.h @@ -35,8 +35,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_MEMPOOLS TRUE @@ -47,8 +45,6 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/matrix/noah/chconf.h b/keyboards/matrix/noah/chconf.h index ccf619fdcad..94fe5f197cb 100644 --- a/keyboards/matrix/noah/chconf.h +++ b/keyboards/matrix/noah/chconf.h @@ -35,8 +35,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_MEMPOOLS TRUE @@ -47,8 +45,6 @@ #define CH_CFG_USE_DYNAMIC TRUE -#define CH_CFG_USE_FACTORY FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/misterknife/knife66/chconf.h b/keyboards/misterknife/knife66/chconf.h index b19c80a7ba9..58f2142ae10 100644 --- a/keyboards/misterknife/knife66/chconf.h +++ b/keyboards/misterknife/knife66/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/misterknife/knife66_iso/chconf.h b/keyboards/misterknife/knife66_iso/chconf.h index 1d83a671288..d1fc8e15329 100644 --- a/keyboards/misterknife/knife66_iso/chconf.h +++ b/keyboards/misterknife/knife66_iso/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/nebula12/chconf.h b/keyboards/nebula12/chconf.h index e34e007fe83..51c2e757125 100644 --- a/keyboards/nebula12/chconf.h +++ b/keyboards/nebula12/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/nemui/chconf.h b/keyboards/nemui/chconf.h index 2e6e17f1aa9..4ee40341390 100644 --- a/keyboards/nemui/chconf.h +++ b/keyboards/nemui/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/nibiria/stream15/chconf.h b/keyboards/nibiria/stream15/chconf.h index 257bb696a8c..44b49fc393c 100644 --- a/keyboards/nibiria/stream15/chconf.h +++ b/keyboards/nibiria/stream15/chconf.h @@ -37,7 +37,5 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #include_next diff --git a/keyboards/nightingale_studios/hailey/chconf.h b/keyboards/nightingale_studios/hailey/chconf.h deleted file mode 100644 index 6d2fa97348e..00000000000 --- a/keyboards/nightingale_studios/hailey/chconf.h +++ /dev/null @@ -1,19 +0,0 @@ -/* -Copyright 2020 zvecr - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#define CH_CFG_USE_TM FALSE -#include_next "chconf.h" \ No newline at end of file diff --git a/keyboards/nightingale_studios/hailey/halconf.h b/keyboards/nightingale_studios/hailey/halconf.h deleted file mode 100644 index 8e3818ea21b..00000000000 --- a/keyboards/nightingale_studios/hailey/halconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* -Copyright 2020 zvecr - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#pragma once - -#define HAL_USE_I2C FALSE -#define HAL_USE_PWM FALSE -#define HAL_USE_SPI FALSE -#define HAL_USE_GPT FALSE -#define HAL_USE_PWM FALSE -#define HAL_USE_DAC FALSE - -#include_next "halconf.h" diff --git a/keyboards/planck/rev6/chconf.h b/keyboards/planck/rev6/chconf.h index 0298c11c40a..e1243f23eca 100644 --- a/keyboards/planck/rev6/chconf.h +++ b/keyboards/planck/rev6/chconf.h @@ -1,8 +1,8 @@ -/* Copyright 2020 QMK Contributors +/* Copyright 2020 QMK * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or + * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -14,8 +14,16 @@ * along with this program. If not, see . */ -// Need to override the SysTick timer to use TIM3 -- this is a 16-bit timer on F303 -// so we need to change resolution and frequency to match. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/planck/rev6/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` + */ + +#pragma once + #define CH_CFG_ST_RESOLUTION 16 + #define CH_CFG_ST_FREQUENCY 10000 -#include_next "chconf.h" + +#include_next + diff --git a/keyboards/primekb/meridian/chconf.h b/keyboards/primekb/meridian/chconf.h index 44182595b0b..c5beb2df124 100644 --- a/keyboards/primekb/meridian/chconf.h +++ b/keyboards/primekb/meridian/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/projectkb/alice/chconf.h b/keyboards/projectkb/alice/chconf.h index 72266cbbb4a..2dfe6f0be0e 100644 --- a/keyboards/projectkb/alice/chconf.h +++ b/keyboards/projectkb/alice/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/projectkb/signature87/chconf.h b/keyboards/projectkb/signature87/chconf.h index 2b6da6c973b..2de08dea332 100644 --- a/keyboards/projectkb/signature87/chconf.h +++ b/keyboards/projectkb/signature87/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/ramonimbao/squishy65/chconf.h b/keyboards/ramonimbao/squishy65/chconf.h index f9146fe52ff..144f324bc5e 100644 --- a/keyboards/ramonimbao/squishy65/chconf.h +++ b/keyboards/ramonimbao/squishy65/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/ramonimbao/wete/chconf.h b/keyboards/ramonimbao/wete/chconf.h index 523ffe46067..18befdb8e1d 100644 --- a/keyboards/ramonimbao/wete/chconf.h +++ b/keyboards/ramonimbao/wete/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/rart/rartlice/chconf.h b/keyboards/rart/rartlice/chconf.h index 5c06b72c88c..0a89eb248c0 100644 --- a/keyboards/rart/rartlice/chconf.h +++ b/keyboards/rart/rartlice/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/retro_75/chconf.h b/keyboards/retro_75/chconf.h index 2245de22d1c..b42ecdbb09f 100644 --- a/keyboards/retro_75/chconf.h +++ b/keyboards/retro_75/chconf.h @@ -25,20 +25,8 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE #define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE diff --git a/keyboards/rocketboard_16/chconf.h b/keyboards/rocketboard_16/chconf.h index 6b6a8526c07..4fbe44bd1d7 100644 --- a/keyboards/rocketboard_16/chconf.h +++ b/keyboards/rocketboard_16/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/satt/vision/chconf.h b/keyboards/satt/vision/chconf.h index 8ea62c97687..21cc2cee612 100644 --- a/keyboards/satt/vision/chconf.h +++ b/keyboards/satt/vision/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/technika/chconf.h b/keyboards/technika/chconf.h index eabb44a1f8e..4cab3f93f5d 100644 --- a/keyboards/technika/chconf.h +++ b/keyboards/technika/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/tkc/godspeed75/chconf.h b/keyboards/tkc/godspeed75/chconf.h index 1c2fed22872..c341c6fba41 100644 --- a/keyboards/tkc/godspeed75/chconf.h +++ b/keyboards/tkc/godspeed75/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/tkw/stoutgat/v2/f411/chconf.h b/keyboards/tkw/stoutgat/v2/f411/chconf.h deleted file mode 100644 index be287db09a2..00000000000 --- a/keyboards/tkw/stoutgat/v2/f411/chconf.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2020 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This file was auto-generated by: - * `qmk chibios-confmigrate -i keyboards/tkw/stoutgat/v2/f411/chconf.h -r platforms/chibios/common/configs/chconf.h` - */ - -#pragma once - -#include_next - diff --git a/keyboards/viktus/styrka/chconf.h b/keyboards/viktus/styrka/chconf.h index 76d16808a7a..0f68479a065 100644 --- a/keyboards/viktus/styrka/chconf.h +++ b/keyboards/viktus/styrka/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/westfoxtrot/prophet/chconf.h b/keyboards/westfoxtrot/prophet/chconf.h index 6a1f54a274a..d2cc7a7c428 100644 --- a/keyboards/westfoxtrot/prophet/chconf.h +++ b/keyboards/westfoxtrot/prophet/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h index 1860897bb0a..d220eec49b6 100644 --- a/keyboards/whitefox/chconf.h +++ b/keyboards/whitefox/chconf.h @@ -29,10 +29,9 @@ #define CH_CFG_USE_WAITEXIT TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_HEAP TRUE #define CH_CFG_USE_DYNAMIC TRUE #include_next + diff --git a/keyboards/wolfmarkclub/wm1/chconf.h b/keyboards/wolfmarkclub/wm1/chconf.h index d4d8b46ae01..41c38c33e47 100644 --- a/keyboards/wolfmarkclub/wm1/chconf.h +++ b/keyboards/wolfmarkclub/wm1/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/xelus/kangaroo/chconf.h b/keyboards/xelus/kangaroo/chconf.h index 886a8967965..71b34b0591c 100644 --- a/keyboards/xelus/kangaroo/chconf.h +++ b/keyboards/xelus/kangaroo/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/xelus/trinityxttkl/chconf.h b/keyboards/xelus/trinityxttkl/chconf.h index 1d1191ca184..6dec71d6674 100644 --- a/keyboards/xelus/trinityxttkl/chconf.h +++ b/keyboards/xelus/trinityxttkl/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/xelus/valor_frl_tkl/chconf.h b/keyboards/xelus/valor_frl_tkl/chconf.h index d30ea0bfe06..5b1d65cb748 100644 --- a/keyboards/xelus/valor_frl_tkl/chconf.h +++ b/keyboards/xelus/valor_frl_tkl/chconf.h @@ -25,21 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/xiaomi/mk02/chconf.h b/keyboards/xiaomi/mk02/chconf.h index 28defbc877c..54f9eb7c2dd 100644 --- a/keyboards/xiaomi/mk02/chconf.h +++ b/keyboards/xiaomi/mk02/chconf.h @@ -37,8 +37,6 @@ #define CH_CFG_USE_MAILBOXES TRUE -#define CH_CFG_USE_MEMCORE TRUE - #define CH_CFG_USE_PIPES TRUE #define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE diff --git a/keyboards/zoo/wampus/chconf.h b/keyboards/zoo/wampus/chconf.h index 3f64f006f56..9d163f5f033 100644 --- a/keyboards/zoo/wampus/chconf.h +++ b/keyboards/zoo/wampus/chconf.h @@ -25,19 +25,7 @@ #define CH_CFG_OPTIMIZE_SPEED FALSE -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_HEAP FALSE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/keyboards/zvecr/split_blackpill/chconf.h b/keyboards/zvecr/split_blackpill/chconf.h index 7b09e5cb861..e98ee9d790b 100644 --- a/keyboards/zvecr/split_blackpill/chconf.h +++ b/keyboards/zvecr/split_blackpill/chconf.h @@ -23,19 +23,7 @@ #define CH_CFG_ST_TIMEDELTA 0 -#define CH_CFG_USE_TM FALSE - #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#define CH_CFG_USE_MEMCORE TRUE - -#define CH_CFG_USE_MEMPOOLS FALSE - -#define CH_CFG_USE_OBJ_FIFOS FALSE - -#define CH_CFG_USE_PIPES FALSE - -#define CH_CFG_USE_DYNAMIC FALSE - #include_next diff --git a/lib/python/qmk/cli/chibios/confmigrate.py b/lib/python/qmk/cli/chibios/confmigrate.py index 9d254885861..3e348b2b07e 100644 --- a/lib/python/qmk/cli/chibios/confmigrate.py +++ b/lib/python/qmk/cli/chibios/confmigrate.py @@ -111,6 +111,7 @@ def migrate_mcuconf_h(to_override, outfile): @cli.argument('-r', '--reference', type=normpath, arg_only=True, help='Specify the reference file to compare against') @cli.argument('-o', '--overwrite', arg_only=True, action='store_true', help='Overwrites the input file during migration.') @cli.argument('-d', '--delete', arg_only=True, action='store_true', help='If the file has no overrides, migration will delete the input file.') +@cli.argument('-f', '--force', arg_only=True, action='store_true', help='Re-migrates an already migrated file, even if it doesn\'t detect a full ChibiOS config.') @cli.subcommand('Generates a migrated ChibiOS configuration file, as a result of comparing the input against a reference') def chibios_confmigrate(cli): """Generates a usable ChibiOS replacement configuration file, based on a fully-defined conf and a reference config. @@ -142,19 +143,19 @@ def chibios_confmigrate(cli): eprint('--------------------------------------') - if "CHCONF_H" in input_defs["dict"] or "_CHCONF_H_" in input_defs["dict"]: + if cli.args.input.name == "chconf.h" and ("CHCONF_H" in input_defs["dict"] or "_CHCONF_H_" in input_defs["dict"] or cli.args.force): migrate_chconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: with open(cli.args.input, "w") as out_file: migrate_chconf_h(to_override, outfile=out_file) - elif "HALCONF_H" in input_defs["dict"] or "_HALCONF_H_" in input_defs["dict"]: + elif cli.args.input.name == "halconf.h" and ("HALCONF_H" in input_defs["dict"] or "_HALCONF_H_" in input_defs["dict"] or cli.args.force): migrate_halconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: with open(cli.args.input, "w") as out_file: migrate_halconf_h(to_override, outfile=out_file) - elif "MCUCONF_H" in input_defs["dict"] or "_MCUCONF_H_" in input_defs["dict"]: + elif cli.args.input.name == "mcuconf.h" and ("MCUCONF_H" in input_defs["dict"] or "_MCUCONF_H_" in input_defs["dict"] or cli.args.force): migrate_mcuconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: with open(cli.args.input, "w") as out_file: From 1108210f1bee89c29b1bcd6105d0a7b48a53ca04 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 21 Jan 2021 22:24:07 +1100 Subject: [PATCH 078/145] Keep track of encoder activity (#11595) * Keep track of encoder activity, provide API for either matrix/encoder. * Fixup build when no RGBLIGHT or Backlight enabled. --- quantum/encoder.c | 22 ++++++++++++++++++---- quantum/encoder.h | 2 +- tmk_core/common/keyboard.c | 24 +++++++++++++++++++++--- tmk_core/common/keyboard.h | 6 ++++++ 4 files changed, 46 insertions(+), 8 deletions(-) diff --git a/quantum/encoder.c b/quantum/encoder.c index 7ca31afedc2..2ed64c1e307 100644 --- a/quantum/encoder.c +++ b/quantum/encoder.c @@ -94,8 +94,9 @@ void encoder_init(void) { #endif } -static void encoder_update(int8_t index, uint8_t state) { - uint8_t i = index; +static bool encoder_update(int8_t index, uint8_t state) { + bool changed = false; + uint8_t i = index; #ifdef ENCODER_RESOLUTIONS int8_t resolution = encoder_resolutions[i]; @@ -109,40 +110,53 @@ static void encoder_update(int8_t index, uint8_t state) { encoder_pulses[i] += encoder_LUT[state & 0xF]; if (encoder_pulses[i] >= resolution) { encoder_value[index]++; + changed = true; encoder_update_kb(index, ENCODER_COUNTER_CLOCKWISE); } if (encoder_pulses[i] <= -resolution) { // direction is arbitrary here, but this clockwise encoder_value[index]--; + changed = true; encoder_update_kb(index, ENCODER_CLOCKWISE); } encoder_pulses[i] %= resolution; + return changed; } -void encoder_read(void) { +bool encoder_read(void) { + bool changed = false; for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { encoder_state[i] <<= 2; encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); - encoder_update(i, encoder_state[i]); + changed |= encoder_update(i, encoder_state[i]); } + return changed; } #ifdef SPLIT_KEYBOARD +void last_encoder_activity_trigger(void); + void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS); } void encoder_update_raw(uint8_t* slave_state) { + bool changed = false; for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { uint8_t index = i + thatHand; int8_t delta = slave_state[i] - encoder_value[index]; while (delta > 0) { delta--; encoder_value[index]++; + changed = true; encoder_update_kb(index, ENCODER_COUNTER_CLOCKWISE); } while (delta < 0) { delta++; encoder_value[index]--; + changed = true; encoder_update_kb(index, ENCODER_CLOCKWISE); } } + + // Update the last encoder input time -- handled external to encoder_read() when we're running a split + if (changed) last_encoder_activity_trigger(); } #endif diff --git a/quantum/encoder.h b/quantum/encoder.h index ec09a8cc475..db6f220da4a 100644 --- a/quantum/encoder.h +++ b/quantum/encoder.h @@ -20,7 +20,7 @@ #include "quantum.h" void encoder_init(void); -void encoder_read(void); +bool encoder_read(void); void encoder_update_kb(int8_t index, bool clockwise); void encoder_update_user(int8_t index, bool clockwise); diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index aea09169fb2..0ca45461282 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -97,9 +97,19 @@ along with this program. If not, see . # include "dip_switch.h" #endif +static uint32_t last_input_modification_time = 0; +uint32_t last_input_activity_time(void) { return last_input_modification_time; } +uint32_t last_input_activity_elapsed(void) { return timer_elapsed32(last_input_modification_time); } + static uint32_t last_matrix_modification_time = 0; uint32_t last_matrix_activity_time(void) { return last_matrix_modification_time; } uint32_t last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); } +void last_matrix_activity_trigger(void) { last_matrix_modification_time = last_input_modification_time = timer_read32(); } + +static uint32_t last_encoder_modification_time = 0; +uint32_t last_encoder_activity_time(void) { return last_encoder_modification_time; } +uint32_t last_encoder_activity_elapsed(void) { return timer_elapsed32(last_encoder_modification_time); } +void last_encoder_activity_trigger(void) { last_encoder_modification_time = last_input_modification_time = timer_read32(); } // Only enable this if console is enabled to print to #if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE) @@ -338,12 +348,15 @@ void keyboard_task(void) { #ifdef QMK_KEYS_PER_SCAN uint8_t keys_processed = 0; #endif +#ifdef ENCODER_ENABLE + bool encoders_changed = false; +#endif housekeeping_task_kb(); housekeeping_task_user(); uint8_t matrix_changed = matrix_scan(); - if (matrix_changed) last_matrix_modification_time = timer_read32(); + if (matrix_changed) last_matrix_activity_trigger(); if (should_process_keypress()) { for (uint8_t r = 0; r < MATRIX_ROWS; r++) { @@ -399,7 +412,8 @@ MATRIX_LOOP_END: #endif #ifdef ENCODER_ENABLE - encoder_read(); + encoders_changed = encoder_read(); + if (encoders_changed) last_encoder_activity_trigger(); #endif #ifdef QWIIC_ENABLE @@ -409,8 +423,12 @@ MATRIX_LOOP_END: #ifdef OLED_DRIVER_ENABLE oled_task(); # ifndef OLED_DISABLE_TIMEOUT - // Wake up oled if user is using those fabulous keys! + // Wake up oled if user is using those fabulous keys or spinning those encoders! +# ifdef ENCODER_ENABLE + if (matrix_changed || encoders_changed) oled_on(); +# else if (matrix_changed) oled_on(); +# endif # endif #endif diff --git a/tmk_core/common/keyboard.h b/tmk_core/common/keyboard.h index cc5b2e5e422..88b3896e9ec 100644 --- a/tmk_core/common/keyboard.h +++ b/tmk_core/common/keyboard.h @@ -73,9 +73,15 @@ void keyboard_post_init_user(void); void housekeeping_task_kb(void); void housekeeping_task_user(void); +uint32_t last_input_activity_time(void); // Timestamp of the last matrix or encoder activity +uint32_t last_input_activity_elapsed(void); // Number of milliseconds since the last matrix or encoder activity + uint32_t last_matrix_activity_time(void); // Timestamp of the last matrix activity uint32_t last_matrix_activity_elapsed(void); // Number of milliseconds since the last matrix activity +uint32_t last_encoder_activity_time(void); // Timestamp of the last encoder activity +uint32_t last_encoder_activity_elapsed(void); // Number of milliseconds since the last encoder activity + #ifdef __cplusplus } #endif From a07c2a137708f8e2b6e1440d386569b97d613cc5 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 22 Jan 2021 19:32:10 +0000 Subject: [PATCH 079/145] Remove QMK_KEYBOARD_CONFIG_H (#11576) --- build_keyboard.mk | 2 +- keyboards/contra/keymaps/losinggeneration/config.h | 6 +----- keyboards/ergodash/rev1/keymaps/333fred/config.h | 2 -- keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h | 7 +------ .../keebio/levinson/keymaps/losinggeneration/config.h | 7 +------ .../keebio/nyquist/keymaps/losinggeneration/config.h | 7 +------ keyboards/keebio/viterbi/keymaps/mike808/config.h | 7 +------ keyboards/pearl/keymaps/cijanzen/config.h | 8 +------- layouts/community/60_ansi/talljoe-ansi/config.h | 2 -- layouts/community/60_hhkb/talljoe-hhkb/config.h | 2 -- layouts/community/60_iso/unxmaal/config.h | 7 +------ layouts/community/ergodox/333fred/config.h | 2 -- layouts/community/ergodox/adam/config.h | 2 +- layouts/community/ergodox/albert/config.h | 7 +------ layouts/community/ergodox/algernon/config.h | 7 +------ layouts/community/ergodox/berfarah/config.h | 6 +----- layouts/community/ergodox/issmirnov/config.h | 2 +- layouts/community/ergodox/jackhumbert/config.h | 7 +------ layouts/community/ergodox/kejadlen/config.h | 7 +------ layouts/community/ergodox/supercoder/config.h | 7 +------ layouts/community/ergodox/townk_osx/config.h | 6 +----- layouts/community/ergodox/videck/config.h | 7 +------ layouts/community/ergodox/win10_writers-block/config.h | 7 +------ layouts/community/ortho_4x12/colemak_mod_dh_wide/config.h | 7 +------ layouts/community/ortho_4x12/crs/config.h | 7 +------ layouts/community/ortho_4x12/ergodoxish/config.h | 7 +------ layouts/community/tkl_ansi/talljoe-tkl/config.h | 2 -- 27 files changed, 22 insertions(+), 125 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index 79fe336b48b..28ba97bbc80 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -379,7 +379,7 @@ ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) $(KEYMAP_OUTPUT)_SRC := $(SRC) $(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \ --DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \ +-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" \ -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \ -DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H $(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) diff --git a/keyboards/contra/keymaps/losinggeneration/config.h b/keyboards/contra/keymaps/losinggeneration/config.h index 759b1d9a000..4a64e977c9b 100644 --- a/keyboards/contra/keymaps/losinggeneration/config.h +++ b/keyboards/contra/keymaps/losinggeneration/config.h @@ -16,12 +16,8 @@ You should have received a copy of the GNU General Public License long with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once -#include QMK_KEYBOARD_CONFIG_H #define USE_MIT_LAYOUT #define TAPPING_TERM 250 - -#endif diff --git a/keyboards/ergodash/rev1/keymaps/333fred/config.h b/keyboards/ergodash/rev1/keymaps/333fred/config.h index b8f5e8c9484..a8ad1e4fe77 100644 --- a/keyboards/ergodash/rev1/keymaps/333fred/config.h +++ b/keyboards/ergodash/rev1/keymaps/333fred/config.h @@ -22,8 +22,6 @@ #pragma once -#include QMK_KEYBOARD_CONFIG_H - #define USE_SERIAL #define MASTER_LEFT diff --git a/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h index 701c2cf353f..c3c4a1b6973 100644 --- a/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h +++ b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h @@ -1,10 +1,5 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #define SOLENOID_ENABLE #define SOLENOID_PIN F6 #define SOLENOID_ACTIVE true - -#endif diff --git a/keyboards/keebio/levinson/keymaps/losinggeneration/config.h b/keyboards/keebio/levinson/keymaps/losinggeneration/config.h index 917c6a98ba0..13023939eba 100644 --- a/keyboards/keebio/levinson/keymaps/losinggeneration/config.h +++ b/keyboards/keebio/levinson/keymaps/losinggeneration/config.h @@ -16,10 +16,7 @@ You should have received a copy of the GNU General Public License long with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -38,5 +35,3 @@ long with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/keebio/nyquist/keymaps/losinggeneration/config.h b/keyboards/keebio/nyquist/keymaps/losinggeneration/config.h index 33037944719..56cacd843ea 100644 --- a/keyboards/keebio/nyquist/keymaps/losinggeneration/config.h +++ b/keyboards/keebio/nyquist/keymaps/losinggeneration/config.h @@ -16,10 +16,7 @@ You should have received a copy of the GNU General Public License long with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -31,5 +28,3 @@ long with this program. If not, see . #define MASTER_LEFT /* #define _MASTER_RIGHT */ /* #define EE_HANDS */ - -#endif diff --git a/keyboards/keebio/viterbi/keymaps/mike808/config.h b/keyboards/keebio/viterbi/keymaps/mike808/config.h index bfca915f24d..95625ea670d 100644 --- a/keyboards/keebio/viterbi/keymaps/mike808/config.h +++ b/keyboards/keebio/viterbi/keymaps/mike808/config.h @@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -39,5 +36,3 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/pearl/keymaps/cijanzen/config.h b/keyboards/pearl/keymaps/cijanzen/config.h index b34fdad90a0..46e9b9f0af5 100644 --- a/keyboards/pearl/keymaps/cijanzen/config.h +++ b/keyboards/pearl/keymaps/cijanzen/config.h @@ -15,13 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef BACKLIGHT_LEVELS #define BACKLIGHT_LEVELS 3 - - -#endif diff --git a/layouts/community/60_ansi/talljoe-ansi/config.h b/layouts/community/60_ansi/talljoe-ansi/config.h index 79cc1900142..0c661f56897 100644 --- a/layouts/community/60_ansi/talljoe-ansi/config.h +++ b/layouts/community/60_ansi/talljoe-ansi/config.h @@ -16,8 +16,6 @@ #pragma once -#include QMK_KEYBOARD_CONFIG_H - #define ENABLE_GAME_LAYER #define TEMPLATE( \ diff --git a/layouts/community/60_hhkb/talljoe-hhkb/config.h b/layouts/community/60_hhkb/talljoe-hhkb/config.h index 0424fee1f31..4868890d45e 100644 --- a/layouts/community/60_hhkb/talljoe-hhkb/config.h +++ b/layouts/community/60_hhkb/talljoe-hhkb/config.h @@ -16,8 +16,6 @@ #pragma once -#include QMK_KEYBOARD_CONFIG_H - #define ENABLE_GAME_LAYER #define TEMPLATE( \ diff --git a/layouts/community/60_iso/unxmaal/config.h b/layouts/community/60_iso/unxmaal/config.h index 7a500b1bb56..4a90186ee9b 100644 --- a/layouts/community/60_iso/unxmaal/config.h +++ b/layouts/community/60_iso/unxmaal/config.h @@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef KEYMAP_CONFIG_H -#define KEYMAP_CONFIG_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #ifndef RGB_DI_PIN #define RGB_DI_PIN F4 @@ -28,5 +25,3 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - -#endif diff --git a/layouts/community/ergodox/333fred/config.h b/layouts/community/ergodox/333fred/config.h index 0509ddbbb9b..00ed7478175 100644 --- a/layouts/community/ergodox/333fred/config.h +++ b/layouts/community/ergodox/333fred/config.h @@ -22,7 +22,5 @@ #pragma once -#include QMK_KEYBOARD_CONFIG_H - #undef TAPPING_TERM #define TAPPING_TERM 200 diff --git a/layouts/community/ergodox/adam/config.h b/layouts/community/ergodox/adam/config.h index 1a8fddb5068..62e82d8b2bf 100644 --- a/layouts/community/ergodox/adam/config.h +++ b/layouts/community/ergodox/adam/config.h @@ -1,4 +1,4 @@ -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef TAPPING_TERM #define TAPPING_TERM 300 //At 500 some bad logic takes hold diff --git a/layouts/community/ergodox/albert/config.h b/layouts/community/ergodox/albert/config.h index 0c6231fbbf5..f0f524b3060 100644 --- a/layouts/community/ergodox/albert/config.h +++ b/layouts/community/ergodox/albert/config.h @@ -1,12 +1,7 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* using UK layout for space-cadet-shift */ #define LSPO_KEY KC_9 #define RSPC_KEY KC_0 #define LEADER_TIMEOUT 800 // leader key sequence timeout in millis - -#endif diff --git a/layouts/community/ergodox/algernon/config.h b/layouts/community/ergodox/algernon/config.h index 8c115e21a06..583c3911f18 100644 --- a/layouts/community/ergodox/algernon/config.h +++ b/layouts/community/ergodox/algernon/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_ALGERNON_H -#define CONFIG_ALGERNON_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef MOUSEKEY_TIME_TO_MAX #undef MOUSEKEY_MAX_SPEED @@ -23,5 +20,3 @@ #undef LEADER_TIMEOUT #define LEADER_TIMEOUT 1000 - -#endif diff --git a/layouts/community/ergodox/berfarah/config.h b/layouts/community/ergodox/berfarah/config.h index 4acefdecc78..0acb95b85f7 100644 --- a/layouts/community/ergodox/berfarah/config.h +++ b/layouts/community/ergodox/berfarah/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_BERFARAH_H -#define CONFIG_BERFARAH_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef TAPPING_TERM #define TAPPING_TERM 150 @@ -10,4 +7,3 @@ #define RGBLIGHT_EFFECT_BREATHE_MAX 150 #undef IGNORE_MOD_TAP_INTERRUPT -#endif diff --git a/layouts/community/ergodox/issmirnov/config.h b/layouts/community/ergodox/issmirnov/config.h index fe62a7d1dff..32f7aeccc1d 100644 --- a/layouts/community/ergodox/issmirnov/config.h +++ b/layouts/community/ergodox/issmirnov/config.h @@ -1,3 +1,3 @@ // Reference: https://beta.docs.qmk.fm/reference/config-options // and https://github.com/qmk/qmk_firmware/blob/master/docs/config_options.md -#include QMK_KEYBOARD_CONFIG_H +#pragma once diff --git a/layouts/community/ergodox/jackhumbert/config.h b/layouts/community/ergodox/jackhumbert/config.h index 04bbed611a6..0aca0d69174 100644 --- a/layouts/community/ergodox/jackhumbert/config.h +++ b/layouts/community/ergodox/jackhumbert/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* ws2812 RGB LED */ #define RGB_DI_PIN D7 @@ -13,5 +10,3 @@ #define RGB_MIDI #define RGBW_BB_TWI - -#endif \ No newline at end of file diff --git a/layouts/community/ergodox/kejadlen/config.h b/layouts/community/ergodox/kejadlen/config.h index 9e076dead12..4e554e8a1a5 100644 --- a/layouts/community/ergodox/kejadlen/config.h +++ b/layouts/community/ergodox/kejadlen/config.h @@ -1,11 +1,6 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #define FORCE_NKRO #undef TAPPING_TERM #undef IGNORE_MOD_TAP_INTERRUPT - -#endif diff --git a/layouts/community/ergodox/supercoder/config.h b/layouts/community/ergodox/supercoder/config.h index 8c191a87c51..0212a4bcf5c 100644 --- a/layouts/community/ergodox/supercoder/config.h +++ b/layouts/community/ergodox/supercoder/config.h @@ -1,9 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H 1 - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef LOCKING_SUPPORT_ENABLE #undef LOCKING_RESYNC_ENABLE - -#endif diff --git a/layouts/community/ergodox/townk_osx/config.h b/layouts/community/ergodox/townk_osx/config.h index 59b3188dfb6..c817dadf502 100644 --- a/layouts/community/ergodox/townk_osx/config.h +++ b/layouts/community/ergodox/townk_osx/config.h @@ -16,10 +16,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once -#include QMK_KEYBOARD_CONFIG_H /* * Feature disable options * These options are also useful to firmware size reduction. @@ -40,5 +38,3 @@ along with this program. If not, see . //#define DEBUG_MATRIX_SCAN_RATE #define ONESHOT_TAP_TOGGLE 2 #define ONESHOT_TIMEOUT 3000 - -#endif diff --git a/layouts/community/ergodox/videck/config.h b/layouts/community/ergodox/videck/config.h index b18b7fa9a9f..e44dcd37c85 100644 --- a/layouts/community/ergodox/videck/config.h +++ b/layouts/community/ergodox/videck/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #ifndef NO_DEBUG #define NO_DEBUG @@ -9,5 +6,3 @@ #ifndef NO_PRINT #define NO_PRINT #endif - -#endif diff --git a/layouts/community/ergodox/win10_writers-block/config.h b/layouts/community/ergodox/win10_writers-block/config.h index b0b4a1ebb96..ca75f83aabe 100644 --- a/layouts/community/ergodox/win10_writers-block/config.h +++ b/layouts/community/ergodox/win10_writers-block/config.h @@ -1,7 +1,4 @@ -#ifndef KEYBOARDS_ERGODOX_CONFIG_H_ -#define KEYBOARDS_ERGODOX_CONFIG_H_ - -#include QMK_KEYBOARD_CONFIG_H +#pragma once #undef MOUSEKEY_DELAY #undef MOUSEKEY_INTERVAL @@ -31,5 +28,3 @@ get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ ) - -#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/layouts/community/ortho_4x12/colemak_mod_dh_wide/config.h b/layouts/community/ortho_4x12/colemak_mod_dh_wide/config.h index 3c3d9b8858c..33e93420395 100644 --- a/layouts/community/ortho_4x12/colemak_mod_dh_wide/config.h +++ b/layouts/community/ortho_4x12/colemak_mod_dh_wide/config.h @@ -18,10 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -33,5 +30,3 @@ along with this program. If not, see . #define MASTER_LEFT // #define _MASTER_RIGHT // #define EE_HANDS - -#endif \ No newline at end of file diff --git a/layouts/community/ortho_4x12/crs/config.h b/layouts/community/ortho_4x12/crs/config.h index 3c3d9b8858c..33e93420395 100644 --- a/layouts/community/ortho_4x12/crs/config.h +++ b/layouts/community/ortho_4x12/crs/config.h @@ -18,10 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -33,5 +30,3 @@ along with this program. If not, see . #define MASTER_LEFT // #define _MASTER_RIGHT // #define EE_HANDS - -#endif \ No newline at end of file diff --git a/layouts/community/ortho_4x12/ergodoxish/config.h b/layouts/community/ortho_4x12/ergodoxish/config.h index 3c3d9b8858c..33e93420395 100644 --- a/layouts/community/ortho_4x12/ergodoxish/config.h +++ b/layouts/community/ortho_4x12/ergodoxish/config.h @@ -18,10 +18,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* Use I2C or Serial, not both */ @@ -33,5 +30,3 @@ along with this program. If not, see . #define MASTER_LEFT // #define _MASTER_RIGHT // #define EE_HANDS - -#endif \ No newline at end of file diff --git a/layouts/community/tkl_ansi/talljoe-tkl/config.h b/layouts/community/tkl_ansi/talljoe-tkl/config.h index 15869ed0b63..8433461044a 100644 --- a/layouts/community/tkl_ansi/talljoe-tkl/config.h +++ b/layouts/community/tkl_ansi/talljoe-tkl/config.h @@ -16,8 +16,6 @@ #pragma once -#include QMK_KEYBOARD_CONFIG_H - #define ENABLE_GAME_LAYER #define TEMPLATE_TKL(\ From 28b1c913b4b6f113655af7288d52db86998fa717 Mon Sep 17 00:00:00 2001 From: Gentoli Date: Sat, 23 Jan 2021 20:55:43 -0500 Subject: [PATCH 080/145] Remove duplicated housekeeping in arm_atsam (#11672) --- tmk_core/protocol/arm_atsam/main_arm_atsam.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index e10be52fb80..a3d1f34496d 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -306,9 +306,6 @@ int main(void) { } #endif // CONSOLE_ENABLE - // Run housekeeping - housekeeping_task_kb(); - housekeeping_task_user(); } return 1; From 625f29368b7408db4375b412064dafa4dfa4bb35 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 25 Jan 2021 22:00:47 +1100 Subject: [PATCH 081/145] Update list of MCUs in keyboard.jsonschema to mirror qmk.constants.py (#11688) --- data/schemas/keyboard.jsonschema | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 0b3d6f393dc..3dba21bc0f9 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["MK20DX128", "MK20DX256", "MKL26Z64", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "at90usb1286", "at90usb646", "atmega16u2", "atmega328p", "atmega32a", "atmega32u2", "atmega32u4", "attiny85", "cortex-m4", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", From 9f1d2246a0d5572dcd57e8c5178e6120d40694d9 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 26 Jan 2021 06:39:36 +1100 Subject: [PATCH 082/145] ChibiOS conf upgrade for durgod/k320 (#11689) durgod/k320 - 168c88d401381d9a29166d3b07967e6f0752532d --- keyboards/durgod/k320/chconf.h | 729 ++------------------------------ keyboards/durgod/k320/halconf.h | 525 ----------------------- 2 files changed, 29 insertions(+), 1225 deletions(-) delete mode 100644 keyboards/durgod/k320/halconf.h diff --git a/keyboards/durgod/k320/chconf.h b/keyboards/durgod/k320/chconf.h index 8ac3a97e073..374a030039b 100644 --- a/keyboards/durgod/k320/chconf.h +++ b/keyboards/durgod/k320/chconf.h @@ -1,714 +1,43 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/durgod/k320/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif +#pragma once -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/durgod/k320/halconf.h b/keyboards/durgod/k320/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/durgod/k320/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ From 30b46fad5764b54ab4d47e9c4024f8030e1bf1a7 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 27 Jan 2021 17:42:49 +1100 Subject: [PATCH 083/145] UART driver refactor (#11637) --- docs/_summary.md | 1 + docs/uart_driver.md | 90 +++++++++++++++++++ {tmk_core/common => drivers/avr}/uart.c | 42 +++++---- drivers/avr/uart.h | 34 +++++++ drivers/chibios/uart.c | 59 ++++++++++++ drivers/chibios/uart.h | 77 ++++++++++++++++ keyboards/mschwingen/modelm/rules.mk | 2 +- keyboards/nullbitsco/nibble/remote_kb.c | 1 + keyboards/nullbitsco/nibble/remote_kb.h | 1 - keyboards/nullbitsco/nibble/rules.mk | 7 +- .../chibios/QMK_PROTON_C/configs/mcuconf.h | 4 +- tmk_core/common/uart.h | 8 -- 12 files changed, 287 insertions(+), 39 deletions(-) create mode 100644 docs/uart_driver.md rename {tmk_core/common => drivers/avr}/uart.c (89%) create mode 100644 drivers/avr/uart.h create mode 100644 drivers/chibios/uart.c create mode 100644 drivers/chibios/uart.h delete mode 100644 tmk_core/common/uart.h diff --git a/docs/_summary.md b/docs/_summary.md index 9bc0b193a79..526caf926f1 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -138,6 +138,7 @@ * [WS2812 Driver](ws2812_driver.md) * [EEPROM Driver](eeprom_driver.md) * ['serial' Driver](serial_driver.md) + * [UART Driver](uart_driver.md) * [GPIO Controls](internals_gpio_control.md) * [Keyboard Guidelines](hardware_keyboard_guidelines.md) diff --git a/docs/uart_driver.md b/docs/uart_driver.md new file mode 100644 index 00000000000..4d1716975f5 --- /dev/null +++ b/docs/uart_driver.md @@ -0,0 +1,90 @@ +# UART Driver + +The UART drivers used in QMK have a set of common functions to allow portability between MCUs. + +Currently, this driver does not support enabling hardware flow control (the `RTS` and `CTS` pins) if available, but may do so in future. + +## AVR Configuration + +No special setup is required - just connect the `RX` and `TX` pins of your UART device to the opposite pins on the MCU: + +|MCU |`TX`|`RX`|`CTS`|`RTS`| +|-------------|----|----|-----|-----| +|ATmega16/32U2|`D3`|`D2`|`D7` |`D6` | +|ATmega16/32U4|`D3`|`D2`|`D5` |`B7` | +|AT90USB64/128|`D3`|`D2`|*n/a*|*n/a*| +|ATmega32A |`D1`|`D0`|*n/a*|*n/a*| +|ATmega328/P |`D1`|`D0`|*n/a*|*n/a*| + +## ChibiOS/ARM Configuration + +You'll need to determine which pins can be used for UART -- as an example, STM32 parts generally have multiple UART peripherals, labeled USART1, USART2, USART3 etc. + +To enable UART, modify your board's `halconf.h` to enable the serial driver: + +```c +#define HAL_USE_SERIAL TRUE +``` + +Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example: + +```c +#undef STM32_SERIAL_USE_USART2 +#define STM32_SERIAL_USE_USART2 TRUE +``` + +Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303. + +|`config.h` override |Description |Default Value| +|--------------------------|---------------------------------------------------------------|-------------| +|`#define SERIAL_DRIVER` |USART peripheral to use - USART1 -> `SD1`, USART2 -> `SD2` etc.|`SD1` | +|`#define SD1_TX_PIN` |The pin to use for TX |`A9` | +|`#define SD1_TX_PAL_MODE` |The alternate function mode for TX |`7` | +|`#define SD1_RX_PIN` |The pin to use for RX |`A10` | +|`#define SD1_RX_PAL_MODE` |The alternate function mode for RX |`7` | +|`#define SD1_CTS_PIN` |The pin to use for CTS |`A11` | +|`#define SD1_CTS_PAL_MODE`|The alternate function mode for CTS |`7` | +|`#define SD1_RTS_PIN` |The pin to use for RTS |`A12` | +|`#define SD1_RTS_PAL_MODE`|The alternate function mode for RTS |`7` | + +## Functions + +### `void uart_init(uint32_t baud)` + +Initialize the UART driver. This function must be called only once, before any of the below functions can be called. + +#### Arguments + + - `uint32_t baud` + The baud rate to transmit and receive at. This may depend on the device you are communicating with. Common values are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. + +--- + +### `void uart_putchar(uint8_t c)` + +Transmit a single byte. + +#### Arguments + + - `uint8_t c` + The byte (character) to send, from 0 to 255. + +--- + +### `uint8_t uart_getchar(void)` + +Receive a single byte. + +#### Return Value + +The byte read from the receive buffer. + +--- + +### `bool uart_available(void)` + +Return whether the receive buffer contains data. Call this function to determine if `uart_getchar()` will return meaningful data. + +#### Return Value + +`true` if the receive buffer length is non-zero. diff --git a/tmk_core/common/uart.c b/drivers/avr/uart.c similarity index 89% rename from tmk_core/common/uart.c rename to drivers/avr/uart.c index 150e256c8f2..e866a9e4f88 100644 --- a/tmk_core/common/uart.c +++ b/drivers/avr/uart.c @@ -1,5 +1,3 @@ -// TODO: Teensy support(ATMega32u4/AT90USB128) -// Fixed for Arduino Duemilanove ATmega168p by Jun Wako /* UART Example for Teensy USB Development Board * http://www.pjrc.com/teensy/ * Copyright (c) 2009 PJRC.COM, LLC @@ -31,22 +29,7 @@ #include "uart.h" -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) -# define UDRn UDR0 -# define UBRRnL UBRR0L -# define UCSRnA UCSR0A -# define UCSRnB UCSR0B -# define UCSRnC UCSR0C -# define U2Xn U2X0 -# define RXENn RXEN0 -# define TXENn TXEN0 -# define RXCIEn RXCIE0 -# define UCSZn1 UCSZ01 -# define UCSZn0 UCSZ00 -# define UDRIEn UDRIE0 -# define USARTn_UDRE_vect USART_UDRE_vect -# define USARTn_RX_vect USART_RX_vect -#elif defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) # define UDRn UDR1 # define UBRRnL UBRR1L # define UCSRnA UCSR1A @@ -76,6 +59,21 @@ # define UDRIEn UDRIE # define USARTn_UDRE_vect USART_UDRE_vect # define USARTn_RX_vect USART_RX_vect +#elif defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) +# define UDRn UDR0 +# define UBRRnL UBRR0L +# define UCSRnA UCSR0A +# define UCSRnB UCSR0B +# define UCSRnC UCSR0C +# define U2Xn U2X0 +# define RXENn RXEN0 +# define TXENn TXEN0 +# define RXCIEn RXCIE0 +# define UCSZn1 UCSZ01 +# define UCSZn0 UCSZ00 +# define UDRIEn UDRIE0 +# define USARTn_UDRE_vect USART_UDRE_vect +# define USARTn_RX_vect USART_RX_vect #endif // These buffers may be any size from 2 to 256 bytes. @@ -131,16 +129,16 @@ uint8_t uart_getchar(void) { return c; } -// Return the number of bytes waiting in the receive buffer. +// Return whether the number of bytes waiting in the receive buffer is nonzero. // Call this before uart_getchar() to check if it will need // to wait for a byte to arrive. -uint8_t uart_available(void) { +bool uart_available(void) { uint8_t head, tail; head = rx_buffer_head; tail = rx_buffer_tail; - if (head >= tail) return head - tail; - return RX_BUFFER_SIZE + head - tail; + if (head >= tail) return (head - tail) > 0; + return (RX_BUFFER_SIZE + head - tail) > 0; } // Transmit Interrupt diff --git a/drivers/avr/uart.h b/drivers/avr/uart.h new file mode 100644 index 00000000000..d5ec563db27 --- /dev/null +++ b/drivers/avr/uart.h @@ -0,0 +1,34 @@ +/* UART Example for Teensy USB Development Board + * http://www.pjrc.com/teensy/ + * Copyright (c) 2009 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#pragma once + +#include + +void uart_init(uint32_t baud); + +void uart_putchar(uint8_t c); + +uint8_t uart_getchar(void); + +bool uart_available(void); diff --git a/drivers/chibios/uart.c b/drivers/chibios/uart.c new file mode 100644 index 00000000000..6e94899b9d6 --- /dev/null +++ b/drivers/chibios/uart.c @@ -0,0 +1,59 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "uart.h" + +#include "quantum.h" + +static SerialConfig serialConfig = { + SERIAL_DEFAULT_BITRATE, + SD1_CR1, + SD1_CR2, + SD1_CR3 +}; + +void uart_init(uint32_t baud) { + static bool is_initialised = false; + + if (!is_initialised) { + is_initialised = true; + + serialConfig.speed = baud; + +#if defined(USE_GPIOV1) + palSetLineMode(SD1_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); + palSetLineMode(SD1_RX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); +#else + palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); +#endif + sdStart(&SERIAL_DRIVER, &serialConfig); + } +} + +void uart_putchar(uint8_t c) { + sdPut(&SERIAL_DRIVER, c); +} + +uint8_t uart_getchar(void) { + msg_t res = sdGet(&SERIAL_DRIVER); + + return (uint8_t)res; +} + +bool uart_available(void) { + return !sdGetWouldBlock(&SERIAL_DRIVER); +} diff --git a/drivers/chibios/uart.h b/drivers/chibios/uart.h new file mode 100644 index 00000000000..b4e20e9fd3d --- /dev/null +++ b/drivers/chibios/uart.h @@ -0,0 +1,77 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include + +#include + +#ifndef SERIAL_DRIVER +# define SERIAL_DRIVER SD1 +#endif + +#ifndef SD1_TX_PIN +# define SD1_TX_PIN A9 +#endif + +#ifndef SD1_TX_PAL_MODE +# define SD1_TX_PAL_MODE 7 +#endif + +#ifndef SD1_RX_PIN +# define SD1_RX_PIN A10 +#endif + +#ifndef SD1_RX_PAL_MODE +# define SD1_RX_PAL_MODE 7 +#endif + +#ifndef SD1_CTS_PIN +# define SD1_CTS_PIN A11 +#endif + +#ifndef SD1_CTS_PAL_MODE +# define SD1_CTS_PAL_MODE 7 +#endif + +#ifndef SD1_RTS_PIN +# define SD1_RTS_PIN A12 +#endif + +#ifndef SD1_RTS_PAL_MODE +# define SD1_RTS_PAL_MODE 7 +#endif + +#ifndef SD1_CR1 +# define SD1_CR1 0 +#endif + +#ifndef SD1_CR2 +# define SD1_CR2 0 +#endif + +#ifndef SD1_CR3 +# define SD1_CR3 0 +#endif + +void uart_init(uint32_t baud); + +void uart_putchar(uint8_t c); + +uint8_t uart_getchar(void); + +bool uart_available(void); diff --git a/keyboards/mschwingen/modelm/rules.mk b/keyboards/mschwingen/modelm/rules.mk index f3af26eeeb0..6775dfa203b 100644 --- a/keyboards/mschwingen/modelm/rules.mk +++ b/keyboards/mschwingen/modelm/rules.mk @@ -29,7 +29,7 @@ DYNAMIC_MACRO_ENABLE = yes UART_DEBUG = no SRC += matrix.c -QUANTUM_LIB_SRC += $(COMMON_DIR)/uart.c \ +QUANTUM_LIB_SRC += uart.c \ spi_master.c OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS2812 LEDs diff --git a/keyboards/nullbitsco/nibble/remote_kb.c b/keyboards/nullbitsco/nibble/remote_kb.c index 2e36f5f22e7..7a914993f31 100644 --- a/keyboards/nullbitsco/nibble/remote_kb.c +++ b/keyboards/nullbitsco/nibble/remote_kb.c @@ -27,6 +27,7 @@ This will require a new communication protocol, as the current one is limited. */ #include "remote_kb.h" +#include "uart.h" uint8_t msg[UART_MSG_LEN], diff --git a/keyboards/nullbitsco/nibble/remote_kb.h b/keyboards/nullbitsco/nibble/remote_kb.h index e2b24655b5d..f4b5c43f5da 100644 --- a/keyboards/nullbitsco/nibble/remote_kb.h +++ b/keyboards/nullbitsco/nibble/remote_kb.h @@ -16,7 +16,6 @@ #pragma once #include "quantum.h" -#include "tmk_core/common/uart.h" #define SERIAL_UART_BAUD 153600 //low error rate for 32u4 @ 16MHz diff --git a/keyboards/nullbitsco/nibble/rules.mk b/keyboards/nullbitsco/nibble/rules.mk index 683e2908669..93402140278 100644 --- a/keyboards/nullbitsco/nibble/rules.mk +++ b/keyboards/nullbitsco/nibble/rules.mk @@ -1,9 +1,6 @@ # MCU name MCU = atmega32u4 -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection BOOTLOADER = atmel-dfu @@ -31,5 +28,5 @@ CUSTOM_MATRIX = lite # Lite custom matrix SRC += matrix.c \ bitc_led.c \ big_led.c \ - remote_kb.c \ - tmk_core/common/uart.c + remote_kb.c +QUANTUM_LIB_SRC += uart.c diff --git a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h index ac2d9a1eed5..4d7b586c085 100644 --- a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h +++ b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h @@ -212,8 +212,8 @@ /* * SERIAL driver system settings. */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE diff --git a/tmk_core/common/uart.h b/tmk_core/common/uart.h deleted file mode 100644 index ea247b17b8d..00000000000 --- a/tmk_core/common/uart.h +++ /dev/null @@ -1,8 +0,0 @@ -#pragma once - -#include - -void uart_init(uint32_t baud); -void uart_putchar(uint8_t c); -uint8_t uart_getchar(void); -uint8_t uart_available(void); From bab9849a8bc799f43e4dc18674c07625630cab0d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 27 Jan 2021 09:33:52 -0800 Subject: [PATCH 084/145] Backport ChibiOS Audio changes from ZSA (#11687) --- quantum/audio/audio_chibios.c | 18 +++++++++++++----- quantum/audio/musical_notes.h | 9 ++++++--- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/quantum/audio/audio_chibios.c b/quantum/audio/audio_chibios.c index 1f147f2c928..1863ae140b5 100644 --- a/quantum/audio/audio_chibios.c +++ b/quantum/audio/audio_chibios.c @@ -86,13 +86,21 @@ static void gpt_cb8(GPTDriver *gptp); #define START_CHANNEL_1() \ gptStart(&GPTD6, &gpt6cfg1); \ - gptStartContinuous(&GPTD6, 2U) + gptStartContinuous(&GPTD6, 2U); \ + palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG) #define START_CHANNEL_2() \ gptStart(&GPTD7, &gpt7cfg1); \ - gptStartContinuous(&GPTD7, 2U) -#define STOP_CHANNEL_1() gptStopTimer(&GPTD6) -#define STOP_CHANNEL_2() gptStopTimer(&GPTD7) -#define RESTART_CHANNEL_1() \ + gptStartContinuous(&GPTD7, 2U); \ + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG) +#define STOP_CHANNEL_1() \ + gptStopTimer(&GPTD6); \ + palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL); \ + palSetPad(GPIOA, 4) +#define STOP_CHANNEL_2() \ + gptStopTimer(&GPTD7); \ + palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); \ + palSetPad(GPIOA, 5) + #define RESTART_CHANNEL_1() \ STOP_CHANNEL_1(); \ START_CHANNEL_1() #define RESTART_CHANNEL_2() \ diff --git a/quantum/audio/musical_notes.h b/quantum/audio/musical_notes.h index 8ac6aafd38f..0ba572c346d 100644 --- a/quantum/audio/musical_notes.h +++ b/quantum/audio/musical_notes.h @@ -17,7 +17,9 @@ #pragma once // Tempo Placeholder -#define TEMPO_DEFAULT 100 +#ifndef TEMPO_DEFAULT +# define TEMPO_DEFAULT 100 +#endif #define SONG(notes...) \ { notes } @@ -60,8 +62,9 @@ #define TIMBRE_25 0.250f #define TIMBRE_50 0.500f #define TIMBRE_75 0.750f -#define TIMBRE_DEFAULT TIMBRE_50 - +#ifndef TIMBRE_DEFAULT +# define TIMBRE_DEFAULT TIMBRE_50 +#endif // Notes - # = Octave #ifdef __arm__ From 99f3df28939d89b7fc2d2e7c0ee21b0879c7813f Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 27 Jan 2021 09:38:34 -0800 Subject: [PATCH 085/145] Add support for 8 buttons to mouse report (#10807) * Add support for 8 buttons to mouse report This includes support for 8 buttons in mousekeys. However, this does move the keys around due to the fact that the last mousekey keycode is already 0xFF, so any past that would not work with register_code and the like, breaking them for tap hold keys, encoders, and other features. * Update mouse key docs * Add changes based on feedback * Fix VUSB report size comment Because drashna red gud * Fix typo in action.c * Fix IS_MOUSE_BUTTON check * Change start range for mousekeys so that the end is 0xFF properly * condense mousekeys check --- docs/feature_mouse_keys.md | 3 ++ docs/feature_pointing_device.md | 2 +- docs/ja/feature_mouse_keys.md | 3 ++ tmk_core/common/action.c | 18 +++++++++++ tmk_core/common/keycode.h | 14 ++++++--- tmk_core/common/mousekey.c | 48 +++++------------------------- tmk_core/common/report.h | 5 +++- tmk_core/protocol/usb_descriptor.c | 12 +++----- tmk_core/protocol/vusb/vusb.c | 10 ++----- 9 files changed, 54 insertions(+), 61 deletions(-) diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md index a0d02416f28..8e2a3a4cd1c 100644 --- a/docs/feature_mouse_keys.md +++ b/docs/feature_mouse_keys.md @@ -29,6 +29,9 @@ In your keymap you can use the following keycodes to map key presses to mouse ac |`KC_MS_BTN3` |`KC_BTN3`|Press button 3 | |`KC_MS_BTN4` |`KC_BTN4`|Press button 4 | |`KC_MS_BTN5` |`KC_BTN5`|Press button 5 | +|`KC_MS_BTN6` |`KC_BTN6`|Press button 6 | +|`KC_MS_BTN7` |`KC_BTN7`|Press button 7 | +|`KC_MS_BTN8` |`KC_BTN8`|Press button 8 | |`KC_MS_WH_UP` |`KC_WH_U`|Move wheel up | |`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down | |`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left | diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index c9309d6975d..c6d3560f31f 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -19,7 +19,7 @@ Keep in mind that a report_mouse_t (here "mouseReport") has the following proper * `mouseReport.y` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ upward, - downward) on the y axis. * `mouseReport.v` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing vertical scrolling (+ upward, - downward). * `mouseReport.h` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing horizontal scrolling (+ right, - left). -* `mouseReport.buttons` - this is a uint8_t in which the last 5 bits are used. These bits represent the mouse button state - bit 3 is mouse button 5, and bit 7 is mouse button 1. +* `mouseReport.buttons` - this is a uint8_t in which all 8 bits are used. These bits represent the mouse button state - bit 0 is mouse button 1, and bit 7 is mouse button 8. Once you have made the necessary changes to the mouse report, you need to send it: diff --git a/docs/ja/feature_mouse_keys.md b/docs/ja/feature_mouse_keys.md index 74b09e939b7..e4fa9dfb456 100644 --- a/docs/ja/feature_mouse_keys.md +++ b/docs/ja/feature_mouse_keys.md @@ -34,6 +34,9 @@ MOUSEKEY_ENABLE = yes | `KC_MS_BTN3` | `KC_BTN3` | ボタン3を押す | | `KC_MS_BTN4` | `KC_BTN4` | ボタン4を押す | | `KC_MS_BTN5` | `KC_BTN5` | ボタン5を押す | +| `KC_MS_BTN6` | `KC_BTN6` | ボタン6を押す | +| `KC_MS_BTN7` | `KC_BTN7` | ボタン7を押す | +| `KC_MS_BTN8` | `KC_BTN8` | ボタン8を押す | | `KC_MS_WH_UP` | `KC_WH_U` | ホイールを向こう側に回転 | | `KC_MS_WH_DOWN` | `KC_WH_D` | ホイールを手前側に回転 | | `KC_MS_WH_LEFT` | `KC_WH_L` | ホイールを左に倒す | diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index a7432bae599..a3830abbff0 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -443,6 +443,15 @@ void process_action(keyrecord_t *record, action_t action) { case KC_MS_BTN5: register_button(true, MOUSE_BTN5); break; + case KC_MS_BTN6: + register_button(true, MOUSE_BTN6); + break; + case KC_MS_BTN7: + register_button(true, MOUSE_BTN7); + break; + case KC_MS_BTN8: + register_button(true, MOUSE_BTN8); + break; # endif default: mousekey_send(); @@ -469,6 +478,15 @@ void process_action(keyrecord_t *record, action_t action) { case KC_MS_BTN5: register_button(false, MOUSE_BTN5); break; + case KC_MS_BTN6: + register_button(false, MOUSE_BTN6); + break; + case KC_MS_BTN7: + register_button(false, MOUSE_BTN7); + break; + case KC_MS_BTN8: + register_button(false, MOUSE_BTN8); + break; # endif default: mousekey_send(); diff --git a/tmk_core/common/keycode.h b/tmk_core/common/keycode.h index d35e44d8dc2..efad92b2356 100644 --- a/tmk_core/common/keycode.h +++ b/tmk_core/common/keycode.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define IS_MOUSEKEY(code) (KC_MS_UP <= (code) && (code) <= KC_MS_ACCEL2) #define IS_MOUSEKEY_MOVE(code) (KC_MS_UP <= (code) && (code) <= KC_MS_RIGHT) -#define IS_MOUSEKEY_BUTTON(code) (KC_MS_BTN1 <= (code) && (code) <= KC_MS_BTN5) +#define IS_MOUSEKEY_BUTTON(code) (KC_MS_BTN1 <= (code) && (code) <= KC_MS_BTN8) #define IS_MOUSEKEY_WHEEL(code) (KC_MS_WH_UP <= (code) && (code) <= KC_MS_WH_RIGHT) #define IS_MOUSEKEY_ACCEL(code) (KC_MS_ACCEL0 <= (code) && (code) <= KC_MS_ACCEL2) @@ -205,6 +205,9 @@ along with this program. If not, see . #define KC_BTN3 KC_MS_BTN3 #define KC_BTN4 KC_MS_BTN4 #define KC_BTN5 KC_MS_BTN5 +#define KC_BTN6 KC_MS_BTN6 +#define KC_BTN7 KC_MS_BTN7 +#define KC_BTN8 KC_MS_BTN8 #define KC_WH_U KC_MS_WH_UP #define KC_WH_D KC_MS_WH_DOWN #define KC_WH_L KC_MS_WH_LEFT @@ -521,15 +524,18 @@ enum internal_special_keycodes { enum mouse_keys { /* Mouse Buttons */ - KC_MS_UP = 0xF0, + KC_MS_UP = 0xED, KC_MS_DOWN, KC_MS_LEFT, - KC_MS_RIGHT, + KC_MS_RIGHT, // 0xF0 KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, KC_MS_BTN4, KC_MS_BTN5, + KC_MS_BTN6, + KC_MS_BTN7, + KC_MS_BTN8, /* Mouse Wheel */ KC_MS_WH_UP, @@ -540,5 +546,5 @@ enum mouse_keys { /* Acceleration */ KC_MS_ACCEL0, KC_MS_ACCEL1, - KC_MS_ACCEL2 + KC_MS_ACCEL2 // 0xFF }; diff --git a/tmk_core/common/mousekey.c b/tmk_core/common/mousekey.c index 6c9df67236f..d8cf63f7710 100644 --- a/tmk_core/common/mousekey.c +++ b/tmk_core/common/mousekey.c @@ -278,16 +278,8 @@ void mousekey_on(uint8_t code) { mouse_report.h = wheel_unit() * -1; else if (code == KC_MS_WH_RIGHT) mouse_report.h = wheel_unit(); - else if (code == KC_MS_BTN1) - mouse_report.buttons |= MOUSE_BTN1; - else if (code == KC_MS_BTN2) - mouse_report.buttons |= MOUSE_BTN2; - else if (code == KC_MS_BTN3) - mouse_report.buttons |= MOUSE_BTN3; - else if (code == KC_MS_BTN4) - mouse_report.buttons |= MOUSE_BTN4; - else if (code == KC_MS_BTN5) - mouse_report.buttons |= MOUSE_BTN5; + else if (IS_MOUSEKEY_BUTTON(code)) + mouse_report.buttons |= 1 << (code - KC_MS_BTN1); else if (code == KC_MS_ACCEL0) mousekey_accel |= (1 << 0); else if (code == KC_MS_ACCEL1) @@ -313,16 +305,8 @@ void mousekey_off(uint8_t code) { mouse_report.h = 0; else if (code == KC_MS_WH_RIGHT && mouse_report.h > 0) mouse_report.h = 0; - else if (code == KC_MS_BTN1) - mouse_report.buttons &= ~MOUSE_BTN1; - else if (code == KC_MS_BTN2) - mouse_report.buttons &= ~MOUSE_BTN2; - else if (code == KC_MS_BTN3) - mouse_report.buttons &= ~MOUSE_BTN3; - else if (code == KC_MS_BTN4) - mouse_report.buttons &= ~MOUSE_BTN4; - else if (code == KC_MS_BTN5) - mouse_report.buttons &= ~MOUSE_BTN5; + else if (IS_MOUSEKEY_BUTTON(code)) + mouse_report.buttons &= ~(1 << (code - KC_MS_BTN1)); else if (code == KC_MS_ACCEL0) mousekey_accel &= ~(1 << 0); else if (code == KC_MS_ACCEL1) @@ -423,16 +407,8 @@ void mousekey_on(uint8_t code) { mouse_report.h = w_offset * -1; else if (code == KC_MS_WH_RIGHT) mouse_report.h = w_offset; - else if (code == KC_MS_BTN1) - mouse_report.buttons |= MOUSE_BTN1; - else if (code == KC_MS_BTN2) - mouse_report.buttons |= MOUSE_BTN2; - else if (code == KC_MS_BTN3) - mouse_report.buttons |= MOUSE_BTN3; - else if (code == KC_MS_BTN4) - mouse_report.buttons |= MOUSE_BTN4; - else if (code == KC_MS_BTN5) - mouse_report.buttons |= MOUSE_BTN5; + else if (IS_MOUSEKEY_BUTTON(code)) + mouse_report.buttons |= 1 << (code - KC_MS_BTN1); else if (code == KC_MS_ACCEL0) mk_speed = mkspd_0; else if (code == KC_MS_ACCEL1) @@ -462,16 +438,8 @@ void mousekey_off(uint8_t code) { mouse_report.h = 0; else if (code == KC_MS_WH_RIGHT && mouse_report.h > 0) mouse_report.h = 0; - else if (code == KC_MS_BTN1) - mouse_report.buttons &= ~MOUSE_BTN1; - else if (code == KC_MS_BTN2) - mouse_report.buttons &= ~MOUSE_BTN2; - else if (code == KC_MS_BTN3) - mouse_report.buttons &= ~MOUSE_BTN3; - else if (code == KC_MS_BTN4) - mouse_report.buttons &= ~MOUSE_BTN4; - else if (code == KC_MS_BTN5) - mouse_report.buttons &= ~MOUSE_BTN5; + else if (IS_MOUSEKEY_BUTTON(code)) + mouse_report.buttons &= ~(1 << (code - KC_MS_BTN1)); # ifdef MK_MOMENTARY_ACCEL else if (code == KC_MS_ACCEL0) mk_speed = mkspd_DEFAULT; diff --git a/tmk_core/common/report.h b/tmk_core/common/report.h index 5d7c5b3b28f..bcf5cab388d 100644 --- a/tmk_core/common/report.h +++ b/tmk_core/common/report.h @@ -39,7 +39,10 @@ enum mouse_buttons { MOUSE_BTN2 = (1 << 1), MOUSE_BTN3 = (1 << 2), MOUSE_BTN4 = (1 << 3), - MOUSE_BTN5 = (1 << 4) + MOUSE_BTN5 = (1 << 4), + MOUSE_BTN6 = (1 << 5), + MOUSE_BTN7 = (1 << 6), + MOUSE_BTN8 = (1 << 7) }; /* Consumer Page (0x0C) diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index 7ea4b2e37c4..ba7760f2836 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -116,19 +116,15 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = { # endif HID_RI_USAGE(8, 0x01), // Pointer HID_RI_COLLECTION(8, 0x00), // Physical - // Buttons (5 bits) + // Buttons (8 bits) HID_RI_USAGE_PAGE(8, 0x09), // Button HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1 - HID_RI_USAGE_MAXIMUM(8, 0x05), // Button 5 + HID_RI_USAGE_MAXIMUM(8, 0x08), // Button 8 HID_RI_LOGICAL_MINIMUM(8, 0x00), HID_RI_LOGICAL_MAXIMUM(8, 0x01), - HID_RI_REPORT_COUNT(8, 0x05), + HID_RI_REPORT_COUNT(8, 0x08), HID_RI_REPORT_SIZE(8, 0x01), HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - // Button padding (3 bits) - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x03), - HID_RI_INPUT(8, HID_IOF_CONSTANT), // X/Y position (2 bytes) HID_RI_USAGE_PAGE(8, 0x01), // Generic Desktop @@ -356,7 +352,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Type = DTYPE_Device }, .USBSpecification = VERSION_BCD(1, 1, 0), - + #if VIRTSER_ENABLE .Class = USB_CSCP_IADDeviceClass, .SubClass = USB_CSCP_IADDeviceSubclass, diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index a422903ccf2..9362fbde785 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -444,19 +444,15 @@ const PROGMEM uchar shared_hid_report[] = { 0x85, REPORT_ID_MOUSE, // Report ID 0x09, 0x01, // Usage (Pointer) 0xA1, 0x00, // Collection (Physical) - // Buttons (5 bits) + // Buttons (8 bits) 0x05, 0x09, // Usage Page (Button) 0x19, 0x01, // Usage Minimum (Button 1) - 0x29, 0x05, // Usage Maximum (Button 5) + 0x29, 0x08, // Usage Maximum (Button 8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) - 0x95, 0x05, // Report Count (5) + 0x95, 0x08, // Report Count (8) 0x75, 0x01, // Report Size (1) 0x81, 0x02, // Input (Data, Variable, Absolute) - // Button padding (3 bits) - 0x95, 0x01, // Report Count (1) - 0x75, 0x03, // Report Size (3) - 0x81, 0x03, // Input (Constant) // X/Y position (2 bytes) 0x05, 0x01, // Usage Page (Generic Desktop) From f59cd6764d922e8c30e55b3a9cea88d5c48242b9 Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Thu, 28 Jan 2021 19:04:37 -0500 Subject: [PATCH 086/145] Allow post_config.h to be implemented in userspace (#11519) > Rebased and pushed. Squashed and merged. :) --- build_keyboard.mk | 3 +++ 1 file changed, 3 insertions(+) diff --git a/build_keyboard.mk b/build_keyboard.mk index 28ba97bbc80..6d54e38446e 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -313,6 +313,9 @@ USER_PATH := users/$(USER_NAME) ifneq ("$(wildcard $(USER_PATH)/config.h)","") CONFIG_H += $(USER_PATH)/config.h endif +ifneq ("$(wildcard $(USER_PATH)/post_config.h)","") + POST_CONFIG_H += $(USER_PATH)/post_config.h +endif # Object files directory # To put object files in current directory, use a dot (.), do NOT make From d92ffd1157e3ecc4ae2dbf8548c45c8b0269f664 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Sat, 30 Jan 2021 03:53:56 +0000 Subject: [PATCH 087/145] Adds AT90USB162 support (#11570) * at90usb162 support * fix missing bracket * Apply suggestions from code review Co-authored-by: Ryan Co-authored-by: Ryan --- bootloader.mk | 6 +++--- common_features.mk | 2 +- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 1 + docs/feature_backlight.md | 24 ++++++++++----------- docs/ja/compatible_microcontrollers.md | 1 + docs/spi_driver.md | 12 +++++------ drivers/avr/serial.c | 6 +++--- drivers/avr/spi_master.c | 2 +- drivers/avr/spi_master.h | 2 +- drivers/avr/uart.c | 2 +- lib/python/qmk/constants.py | 2 +- lib/python/qmk/os_helpers/linux/__init__.py | 1 + quantum/backlight/backlight_avr.c | 2 +- quantum/config_common.h | 2 +- quantum/dynamic_keymap.c | 2 ++ quantum/mcu_selection.mk | 4 ++-- util/drivers.txt | 1 + util/udev/50-qmk.rules | 2 ++ 19 files changed, 42 insertions(+), 34 deletions(-) diff --git a/bootloader.mk b/bootloader.mk index 8b4bc7a0fc4..fd76446e99e 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -40,7 +40,7 @@ ifeq ($(strip $(BOOTLOADER)), atmel-dfu) OPT_DEFS += -DBOOTLOADER_ATMEL_DFU OPT_DEFS += -DBOOTLOADER_DFU - ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) @@ -50,7 +50,7 @@ endif ifeq ($(strip $(BOOTLOADER)), lufa-dfu) OPT_DEFS += -DBOOTLOADER_LUFA_DFU OPT_DEFS += -DBOOTLOADER_DFU - ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) @@ -60,7 +60,7 @@ endif ifeq ($(strip $(BOOTLOADER)), qmk-dfu) OPT_DEFS += -DBOOTLOADER_QMK_DFU OPT_DEFS += -DBOOTLOADER_DFU - ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) diff --git a/common_features.mk b/common_features.mk index fa92a8482f0..6ed7e73b668 100644 --- a/common_features.mk +++ b/common_features.mk @@ -222,7 +222,7 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) $(error "$(RGB_MATRIX_DRIVER)" is not a valid matrix type) endif OPT_DEFS += -DRGB_MATRIX_ENABLE -ifneq (,$(filter $(MCU), atmega16u2 atmega32u2)) +ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162)) # ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines OPT_DEFS += -DLIB8_ATTINY endif diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 3dba21bc0f9..8f1c0a91578 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index ac90ed7464f..8694beb7cb7 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -9,6 +9,7 @@ The following use [LUFA](https://www.fourwalledcubicle.com/LUFA.php) as the USB * [ATmega16U2](https://www.microchip.com/wwwproducts/en/ATmega16U2) / [ATmega32U2](https://www.microchip.com/wwwproducts/en/ATmega32U2) * [ATmega16U4](https://www.microchip.com/wwwproducts/en/ATmega16U4) / [ATmega32U4](https://www.microchip.com/wwwproducts/en/ATmega32U4) * [AT90USB64](https://www.microchip.com/wwwproducts/en/AT90USB646) / [AT90USB128](https://www.microchip.com/wwwproducts/en/AT90USB1286) +* [AT90USB162](https://www.microchip.com/wwwproducts/en/AT90USB162) Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/products/vusb/index.html) instead: diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index a558af64e14..2adb16e4a86 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -93,18 +93,18 @@ BACKLIGHT_DRIVER = pwm On AVR boards, QMK automatically decides which driver to use according to the following table: -|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P| -|-------------|-------------|-------------|-------------|---------|-----------| -|`B1` | | | | |Timer 1 | -|`B2` | | | | |Timer 1 | -|`B5` |Timer 1 |Timer 1 | | | | -|`B6` |Timer 1 |Timer 1 | | | | -|`B7` |Timer 1 |Timer 1 |Timer 1 | | | -|`C4` |Timer 3 | | | | | -|`C5` |Timer 3 | |Timer 1 | | | -|`C6` |Timer 3 |Timer 3 |Timer 1 | | | -|`D4` | | | |Timer 1 | | -|`D5` | | | |Timer 1 | | +|Backlight Pin|AT90USB64/128|AT90USB162|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P| +|-------------|-------------|----------|-------------|-------------|---------|-----------| +|`B1` | | | | | |Timer 1 | +|`B2` | | | | | |Timer 1 | +|`B5` |Timer 1 | |Timer 1 | | | | +|`B6` |Timer 1 | |Timer 1 | | | | +|`B7` |Timer 1 |Timer 1 |Timer 1 |Timer 1 | | | +|`C4` |Timer 3 | | | | | | +|`C5` |Timer 3 |Timer 1 | |Timer 1 | | | +|`C6` |Timer 3 |Timer 1 |Timer 3 |Timer 1 | | | +|`D4` | | | | |Timer 1 | | +|`D5` | | | | |Timer 1 | | All other pins will use timer-assisted software PWM: diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md index 56f4c029771..b89dd54b06d 100644 --- a/docs/ja/compatible_microcontrollers.md +++ b/docs/ja/compatible_microcontrollers.md @@ -14,6 +14,7 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま * [ATmega16U2](https://www.microchip.com/wwwproducts/en/ATmega16U2) / [ATmega32U2](https://www.microchip.com/wwwproducts/en/ATmega32U2) * [ATmega16U4](https://www.microchip.com/wwwproducts/en/ATmega16U4) / [ATmega32U4](https://www.microchip.com/wwwproducts/en/ATmega32U4) * [AT90USB64](https://www.microchip.com/wwwproducts/en/AT90USB646) / [AT90USB128](https://www.microchip.com/wwwproducts/en/AT90USB1286) +* [AT90USB162](https://www.microchip.com/wwwproducts/en/AT90USB162) 組み込みの USB インターフェースを持たない、いくつかの MCU は代わりに [V-USB](https://www.obdev.at/products/vusb/index.html) を使います: diff --git a/docs/spi_driver.md b/docs/spi_driver.md index 1d432432ad1..03c008da2ad 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -6,12 +6,12 @@ The SPI Master drivers used in QMK have a set of common functions to allow porta No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` pins of your SPI devices to the matching pins on the MCU: -|MCU |`SS`|`SCK`|`MOSI`|`MISO`| -|---------------|----|-----|------|------| -|ATMega16/32U2/4|`B0`|`B1` |`B2` |`B3` | -|AT90USB64/128 |`B0`|`B1` |`B2` |`B3` | -|ATmega32A |`B4`|`B7` |`B5` |`B6` | -|ATmega328/P |`B2`|`B5` |`B3` |`B4` | +|MCU |`SS`|`SCK`|`MOSI`|`MISO`| +|-----------------|----|-----|------|------| +|ATMega16/32U2/4 |`B0`|`B1` |`B2` |`B3` | +|AT90USB64/128/162|`B0`|`B1` |`B2` |`B3` | +|ATmega32A |`B4`|`B7` |`B5` |`B6` | +|ATmega328/P |`B2`|`B5` |`B3` |`B4` | You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually. `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`. diff --git a/drivers/avr/serial.c b/drivers/avr/serial.c index 526a0946b26..3647bee0d35 100644 --- a/drivers/avr/serial.c +++ b/drivers/avr/serial.c @@ -20,7 +20,7 @@ #ifdef SOFT_SERIAL_PIN -# if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) +# if !(defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) # error serial.c is not supported for the currently selected MCU # endif // if using ATmega32U4/2, AT90USBxxx I2C, can not use PD0 and PD1 in soft serial. @@ -52,8 +52,8 @@ # define EICRx EICRA # endif -// ATmegaxxU2 specific config -# if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) +// ATmegaxxU2/AT90USB162 specific config +# if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_AT90USB162__) // PD4(INT5), PD6(INT6), PD7(INT7), PC7(INT4) # if SOFT_SERIAL_PIN == D4 # define EIMSK_BIT _BV(INT5) diff --git a/drivers/avr/spi_master.c b/drivers/avr/spi_master.c index cbec9f36e1a..19ca0ced441 100644 --- a/drivers/avr/spi_master.c +++ b/drivers/avr/spi_master.c @@ -20,7 +20,7 @@ #include "quantum.h" #include "timer.h" -#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) # define SPI_SCK_PIN B1 # define SPI_MOSI_PIN B2 # define SPI_MISO_PIN B3 diff --git a/drivers/avr/spi_master.h b/drivers/avr/spi_master.h index e36a7c21c06..9203698dd56 100644 --- a/drivers/avr/spi_master.h +++ b/drivers/avr/spi_master.h @@ -21,7 +21,7 @@ typedef int16_t spi_status_t; // Hardware SS pin is defined in the header so that user code can refer to it -#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) # define SPI_SS_PIN B0 #elif defined(__AVR_ATmega32A__) # define SPI_SS_PIN B4 diff --git a/drivers/avr/uart.c b/drivers/avr/uart.c index e866a9e4f88..c6abcb6fe0d 100644 --- a/drivers/avr/uart.c +++ b/drivers/avr/uart.c @@ -29,7 +29,7 @@ #include "uart.h" -#if defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) +#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) # define UDRn UDR1 # define UBRRnL UBRR1L # define UCSRnA UCSR1A diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 404a58a7e5d..cb946135628 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -11,7 +11,7 @@ MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411' -LUFA_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None +LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' # Common format strings diff --git a/lib/python/qmk/os_helpers/linux/__init__.py b/lib/python/qmk/os_helpers/linux/__init__.py index 86850bf2843..a04ac4f8a91 100644 --- a/lib/python/qmk/os_helpers/linux/__init__.py +++ b/lib/python/qmk/os_helpers/linux/__init__.py @@ -48,6 +48,7 @@ def check_udev_rules(): _udev_rule("03eb", "2ff3"), # ATmega16U4 _udev_rule("03eb", "2ff4"), # ATmega32U4 _udev_rule("03eb", "2ff9"), # AT90USB64 + _udev_rule("03eb", "2ffa"), # AT90USB162 _udev_rule("03eb", "2ffb") # AT90USB128 }, 'kiibohd': {_udev_rule("1c11", "b007")}, diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index 4d66da80ba1..2ecdd4f2c42 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -68,7 +68,7 @@ # define COMxx1 COM3A1 # define OCRxx OCR3A # endif -#elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6) +#elif (defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6) # define HARDWARE_PWM # define ICRx ICR1 # define TCCRxA TCCR1A diff --git a/quantum/config_common.h b/quantum/config_common.h index 2d9c70b08de..df3a6c5c542 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -39,7 +39,7 @@ # define PIND_ADDRESS 0x9 # define PINE_ADDRESS 0xC # define PINF_ADDRESS 0xF -# elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) +# elif defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) # define ADDRESS_BASE 0x00 # define PINB_ADDRESS 0x3 # define PINC_ADDRESS 0x6 diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index 0608b469c08..a860b949797 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -37,6 +37,8 @@ #ifndef DYNAMIC_KEYMAP_EEPROM_MAX_ADDR # if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047 +# elif defined(__AVR_AT90USB162__) +# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 511 # else # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 1023 # endif diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 6b11eb49872..09e07a37fd1 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -279,7 +279,7 @@ ifneq ($(findstring STM32F411, $(MCU)),) DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif -ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) +ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) PROTOCOL = LUFA # Processor frequency. @@ -317,7 +317,7 @@ ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 a ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes)) OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT endif - ifneq (,$(filter $(MCU),atmega16u2 atmega32u2)) + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2)) NO_I2C = yes endif endif diff --git a/util/drivers.txt b/util/drivers.txt index c3c5e286b1c..a41192571fe 100644 --- a/util/drivers.txt +++ b/util/drivers.txt @@ -11,4 +11,5 @@ libusb,ATmega32U2,03EB,2FF0,ddc2c572-cb6e-4f61-a6cc-1a5de941f063 libusb,ATmega16U4,03EB,2FF3,3180d426-bf93-4578-a693-2efbc337da8e libusb,ATmega32U4,03EB,2FF4,5f9726fd-f9de-487a-9fbd-8b3524a7a56a libusb,AT90USB64,03EB,2FF9,c6a708ad-e97d-43cd-b04a-3180d737a71b +libusb,AT90USB162,03EB,2FFA,ef8546f0-ef09-4e7c-8fc2-ffbae1dcd84a libusb,AT90USB128,03EB,2FFB,fd217df3-59d0-440a-a8f3-4c0c8c84daa3 diff --git a/util/udev/50-qmk.rules b/util/udev/50-qmk.rules index 70bd7e6e3e0..acaa7dcc587 100644 --- a/util/udev/50-qmk.rules +++ b/util/udev/50-qmk.rules @@ -9,6 +9,8 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff3", TAG+="uacc SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess" ### AT90USB64 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff9", TAG+="uaccess" +### AT90USB162 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffa", TAG+="uaccess" ### AT90USB128 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess" From 4fe4087d4abd13a0f7b5754a1766151f02daf3fc Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sat, 30 Jan 2021 15:13:56 +1100 Subject: [PATCH 088/145] Enforce memory allocator for ChibiOS builds with allocating debounce algorithms (#11630) --- quantum/debounce/sym_defer_pk.c | 6 ++++++ quantum/debounce/sym_eager_pk.c | 6 ++++++ quantum/debounce/sym_eager_pr.c | 6 ++++++ 3 files changed, 18 insertions(+) diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 6c0e3bb071c..60513f98e1d 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -23,6 +23,12 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #include "quantum.h" #include +#ifdef PROTOCOL_CHIBIOS +# if CH_CFG_USE_MEMCORE == FALSE +# error ChibiOS is configured without a memory allocator. Your keyboard may have set `#define CH_CFG_USE_MEMCORE FALSE`, which is incompatible with this debounce algorithm. +# endif +#endif + #ifndef DEBOUNCE # define DEBOUNCE 5 #endif diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index 93a40ad4411..e66cf92d79c 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -23,6 +23,12 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred. #include "quantum.h" #include +#ifdef PROTOCOL_CHIBIOS +# if CH_CFG_USE_MEMCORE == FALSE +# error ChibiOS is configured without a memory allocator. Your keyboard may have set `#define CH_CFG_USE_MEMCORE FALSE`, which is incompatible with this debounce algorithm. +# endif +#endif + #ifndef DEBOUNCE # define DEBOUNCE 5 #endif diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index d12931fddbf..20ccb46f1dd 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -23,6 +23,12 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred. #include "quantum.h" #include +#ifdef PROTOCOL_CHIBIOS +# if CH_CFG_USE_MEMCORE == FALSE +# error ChibiOS is configured without a memory allocator. Your keyboard may have set `#define CH_CFG_USE_MEMCORE FALSE`, which is incompatible with this debounce algorithm. +# endif +#endif + #ifndef DEBOUNCE # define DEBOUNCE 5 #endif From 6b9a7e21e953d68d6ae093c2d727f1f3ac2798c0 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 29 Jan 2021 23:35:16 -0800 Subject: [PATCH 089/145] Include stdbool.h in uart.h (#11728) --- drivers/avr/uart.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/avr/uart.h b/drivers/avr/uart.h index d5ec563db27..602eb3d8b0f 100644 --- a/drivers/avr/uart.h +++ b/drivers/avr/uart.h @@ -24,6 +24,7 @@ #pragma once #include +#include void uart_init(uint32_t baud); From 915d757eb2e38a7980ad6c18a90e7ca4f5edc763 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:32:15 -0800 Subject: [PATCH 090/145] fix atomic:pvc so it compiles --- keyboards/atomic/keymaps/pvc/keymap.c | 2 +- keyboards/atomic/keymaps/pvc/rules.mk | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c index 361d702c5bc..51e697f9685 100644 --- a/keyboards/atomic/keymaps/pvc/keymap.c +++ b/keyboards/atomic/keymaps/pvc/keymap.c @@ -401,7 +401,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { else { breathing_period_set(1); - breathing_self_disable(); + breathing_disable(); layer_off(LAYER_FUNCTION); } break; diff --git a/keyboards/atomic/keymaps/pvc/rules.mk b/keyboards/atomic/keymaps/pvc/rules.mk index 8414b40fb6d..fa693923e54 100644 --- a/keyboards/atomic/keymaps/pvc/rules.mk +++ b/keyboards/atomic/keymaps/pvc/rules.mk @@ -10,6 +10,7 @@ AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +LTO_ENABLE = yes # Optimize size of firmware # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend \ No newline at end of file +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From cd53947d8619259c54f53befe28569d3a04210bc Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:35:28 -0800 Subject: [PATCH 091/145] enable LTO on atreus:ibnuda to bring it below the threshold --- keyboards/atreus/keymaps/ibnuda/rules.mk | 1 + 1 file changed, 1 insertion(+) create mode 100644 keyboards/atreus/keymaps/ibnuda/rules.mk diff --git a/keyboards/atreus/keymaps/ibnuda/rules.mk b/keyboards/atreus/keymaps/ibnuda/rules.mk new file mode 100644 index 00000000000..14227c90d79 --- /dev/null +++ b/keyboards/atreus/keymaps/ibnuda/rules.mk @@ -0,0 +1 @@ +LTO_ENABLE=yes From 13e4bd31d7c6fb92e18a4a1d1ad498cfb5d829aa Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:35:35 -0800 Subject: [PATCH 092/145] enable bluetooth on atreus:clash to fix compile error --- keyboards/atreus/keymaps/clash/rules.mk | 1 + 1 file changed, 1 insertion(+) create mode 100644 keyboards/atreus/keymaps/clash/rules.mk diff --git a/keyboards/atreus/keymaps/clash/rules.mk b/keyboards/atreus/keymaps/clash/rules.mk new file mode 100644 index 00000000000..db1870fb157 --- /dev/null +++ b/keyboards/atreus/keymaps/clash/rules.mk @@ -0,0 +1 @@ +BLUETOOTH_ENABLE=yes From c8edd6ec9ef9e1136220ed7331ae2d7483fdd9c6 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:36:23 -0800 Subject: [PATCH 093/145] fix chimera_ortho:gordon so it compiles --- .../chimera_ortho/keymaps/gordon/keymap.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/keyboards/chimera_ortho/keymaps/gordon/keymap.c b/keyboards/chimera_ortho/keymaps/gordon/keymap.c index c0543f2e041..5bd2019c26f 100644 --- a/keyboards/chimera_ortho/keymaps/gordon/keymap.c +++ b/keyboards/chimera_ortho/keymaps/gordon/keymap.c @@ -112,13 +112,8 @@ * */ -//Tap dance enums enum { - F12ETAPS = 0, - CALCCOMP, - ALTF4, - F6F7, - TTT, + TTT = 4, HOME_END, CALC_PRINTSCREEN }; @@ -188,18 +183,6 @@ void TTT_reset (qk_tap_dance_state_t *state, void *user_data) { ttt_state.state = 0; } -qk_tap_dance_action_t tap_dance_actions[] = { - // simple tap dance - [F12ETAPS] = ACTION_TAP_DANCE_DOUBLE(KC_F12,LSFT(LCTL(KC_F10))), - [CALCCOMP] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_MY_COMPUTER), - [CALC_PRINTSCREEN] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_PSCR), - [ALTF4] = ACTION_TAP_DANCE_DOUBLE(KC_F4,LALT(KC_F4)), - [F6F7] = ACTION_TAP_DANCE_DOUBLE(LSFT(KC_F6), LALT(KC_F7)), - [HOME_END] = ACTION_TAP_DANCE_DOUBLE(KC_END, KC_HOME), - [TTT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,TTT_finished, TTT_reset), -}; - - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_kc( From 404bcc961c8eff704cd037aea64e0cf6155c1c4c Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:37:10 -0800 Subject: [PATCH 094/145] fix clueboard/66:magicmonty to bring hue under the 255 limit --- .../clueboard/66/keymaps/magicmonty/keymap.c | 26 +++++++++---------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/keyboards/clueboard/66/keymaps/magicmonty/keymap.c b/keyboards/clueboard/66/keymaps/magicmonty/keymap.c index cd9ae01188e..54420d31b6f 100644 --- a/keyboards/clueboard/66/keymaps/magicmonty/keymap.c +++ b/keyboards/clueboard/66/keymaps/magicmonty/keymap.c @@ -134,23 +134,23 @@ enum layer_id { void clueboard_set_led(uint8_t id, uint8_t val) { switch (id) { case LAYER_BASE: - rgblight_sethsv_noeeprom(190, 255, val); + rgblight_sethsv_noeeprom(135, 255, val); break; case LAYER_FUNCTION: - rgblight_sethsv_noeeprom(46, 255, val); + rgblight_sethsv_noeeprom(32, 255, val); break; case LAYER_MEDIA: - rgblight_sethsv_noeeprom(86, 255, val); + rgblight_sethsv_noeeprom(60, 255, val); break; case LAYER_CONTROL: - rgblight_sethsv_noeeprom(346, 255, val); + rgblight_sethsv_noeeprom(245, 255, val); break; case LAYER_MOUSE: - rgblight_sethsv_noeeprom(206, 255, val); + rgblight_sethsv_noeeprom(146, 255, val); break; #if defined(MIDI_ENABLE) case LAYER_MIDI: - rgblight_sethsv_noeeprom(316, 255, val); + rgblight_sethsv_noeeprom(224, 255, val); break; #endif } @@ -158,15 +158,15 @@ void clueboard_set_led(uint8_t id, uint8_t val) { const uint16_t oct_hues[10] = { 0, - 30, + 20, + 40, 60, - 90, + 80, + 100, 120, - 150, - 180, - 210, - 240, - 300 + 140, + 160, + 180 }; #define MAX_OCT 9 From 04d6d25ec3b8a0718d2c575e21b7c98f5848dda8 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:37:28 -0800 Subject: [PATCH 095/145] make the tetris keymap fit --- keyboards/clueboard/66/keymaps/tetris/rules.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/clueboard/66/keymaps/tetris/rules.mk b/keyboards/clueboard/66/keymaps/tetris/rules.mk index 4613531296b..464c6e0c8e4 100644 --- a/keyboards/clueboard/66/keymaps/tetris/rules.mk +++ b/keyboards/clueboard/66/keymaps/tetris/rules.mk @@ -1 +1,3 @@ SRC = tetris_text.c +RGBLIGHT_ENABLE = no +BACKLIGHT_ENABLE = no From 1ed9c53816d8cbd86bc0883adb3310e2b158a9a7 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:37:53 -0800 Subject: [PATCH 096/145] add missing ADJUST key --- keyboards/contra/keymaps/msiu/keymap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/contra/keymaps/msiu/keymap.c b/keyboards/contra/keymaps/msiu/keymap.c index c68c2c7bbf6..ee0598533d3 100644 --- a/keyboards/contra/keymaps/msiu/keymap.c +++ b/keyboards/contra/keymaps/msiu/keymap.c @@ -16,7 +16,8 @@ enum planck_keycodes { QWERTY = SAFE_RANGE, DVORAK, LOWER, - RAISE + RAISE, + ADJUST }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { From 5ba21060cb0a3a5558eaa7fe6e068019d79ecd53 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:38:26 -0800 Subject: [PATCH 097/145] remove conflicting NKRO_ENABLE flag --- keyboards/converter/usb_usb/keymaps/narze/rules.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/keyboards/converter/usb_usb/keymaps/narze/rules.mk b/keyboards/converter/usb_usb/keymaps/narze/rules.mk index 657773e84ee..2d982de6289 100644 --- a/keyboards/converter/usb_usb/keymaps/narze/rules.mk +++ b/keyboards/converter/usb_usb/keymaps/narze/rules.mk @@ -1,3 +1,2 @@ EXTRAKEY_ENABLE = no -NKRO_ENABLE = yes COMBO_ENABLE = yes From e0769ea71d1cf4dbc125de0ff0a2e83ec7b8c52a Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:38:50 -0800 Subject: [PATCH 098/145] strip fn_actions --- layouts/community/60_iso/unxmaal/keymap.c | 101 +--------------------- 1 file changed, 2 insertions(+), 99 deletions(-) diff --git a/layouts/community/60_iso/unxmaal/keymap.c b/layouts/community/60_iso/unxmaal/keymap.c index 5c8325e62f5..e1c0454fb6d 100644 --- a/layouts/community/60_iso/unxmaal/keymap.c +++ b/layouts/community/60_iso/unxmaal/keymap.c @@ -90,37 +90,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_UL] = LAYOUT_60_iso( KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ - KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,RGB_TOG,RGB_MOD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), }; -enum function_id { - RGBLED_TOGGLE, - RGBLED_STEP_MODE, - RGBLED_INCREASE_HUE, - RGBLED_DECREASE_HUE, - RGBLED_INCREASE_SAT, - RGBLED_DECREASE_SAT, - RGBLED_INCREASE_VAL, - RGBLED_DECREASE_VAL, - SHIFT_ESC, -}; - -const uint16_t PROGMEM fn_actions[] = { - [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow - [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode - [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), - [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), - [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), - [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), - [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), - [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), - [12] = ACTION_FUNCTION(SHIFT_ESC), -}; - void matrix_scan_user(void) { - // Layer LED indicators // ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster #ifdef KEYBOARD_gh60 @@ -138,75 +113,3 @@ void matrix_scan_user(void) { } #endif }; - -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) - -void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - switch (id) { -#ifdef RGBLIGHT_ENABLE - case RGBLED_TOGGLE: - //led operations - if (record->event.pressed) { - rgblight_toggle(); - } - break; - case RGBLED_INCREASE_HUE: - if (record->event.pressed) { - rgblight_increase_hue(); - } - break; - case RGBLED_DECREASE_HUE: - if (record->event.pressed) { - rgblight_decrease_hue(); - } - break; - case RGBLED_INCREASE_SAT: - if (record->event.pressed) { - rgblight_increase_sat(); - } - break; - case RGBLED_DECREASE_SAT: - if (record->event.pressed) { - rgblight_decrease_sat(); - } - break; - case RGBLED_INCREASE_VAL: - if (record->event.pressed) { - rgblight_increase_val(); - } - break; - case RGBLED_DECREASE_VAL: - if (record->event.pressed) { - rgblight_decrease_val(); - } - break; - case RGBLED_STEP_MODE: - if (record->event.pressed) { - rgblight_step(); - } - break; -#endif - static uint8_t shift_esc_shift_mask; - // Shift + ESC = ~ - case SHIFT_ESC: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } - break; - } -}; From 0171e67494214ab0414a7c14917097388b813b92 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:39:43 -0800 Subject: [PATCH 099/145] bring the xyverz keymap inline with LAYOUT_66_ansi --- layouts/community/66_ansi/xyverz/keymap.c | 50 +++++++++++------------ layouts/community/66_ansi/xyverz/rules.mk | 4 +- 2 files changed, 28 insertions(+), 26 deletions(-) diff --git a/layouts/community/66_ansi/xyverz/keymap.c b/layouts/community/66_ansi/xyverz/keymap.c index 521379bde91..d7231db5cb9 100644 --- a/layouts/community/66_ansi/xyverz/keymap.c +++ b/layouts/community/66_ansi/xyverz/keymap.c @@ -37,12 +37,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `------------------------------------------------------------------' */ -[_QWERTY] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ +[_QWERTY] = LAYOUT_66_ansi ( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _COLEMAK: Base Layer * ,-----------------------------------------------------------. ,---. @@ -57,12 +57,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| * `------------------------------------------------------------------' */ -[_COLEMAK] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ +[_COLEMAK] = LAYOUT_66_ansi ( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _DVORAK: Base Layer * ,-----------------------------------------------------------. ,---. @@ -77,30 +77,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui|Alt | | Space| Space| |Alt |Gui |Ctrl|Left|Down|Rgt| * `------------------------------------------------------------------' */ -[_DVORAK] = LAYOUT ( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ +[_DVORAK] = LAYOUT_66_ansi ( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGDN, \ - FN_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT, \ - KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + FN_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer */ -[_FL] = LAYOUT ( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ +[_FL] = LAYOUT_66_ansi ( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, BL_STEP, \ _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ - _______, _______, MO(_CL), _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_PGUP, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), + _______, _______, MO(_CL), _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PGUP, \ + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END), /* Keymap _CL: Control layer */ -[_CL] = LAYOUT ( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ +[_CL] = LAYOUT_66_ansi ( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \ _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, \ - _______, _______, MO(_CL), _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, \ - _______, _______, _______, _______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), + _______, _______, MO(_CL), _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, \ + _______, _______, _______, RGB_MOD, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI), }; // clang-format on diff --git a/layouts/community/66_ansi/xyverz/rules.mk b/layouts/community/66_ansi/xyverz/rules.mk index 164232f3398..6ddbb80a9c5 100644 --- a/layouts/community/66_ansi/xyverz/rules.mk +++ b/layouts/community/66_ansi/xyverz/rules.mk @@ -1 +1,3 @@ -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. \ No newline at end of file +ifneq ($(strip $(RGBLIGHT_SUPPORTED)), no) + RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +endif From e5ecdd524272b34d5ba260423a2850ed7b4788e1 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:40:24 -0800 Subject: [PATCH 100/145] bring the bocaj keymap inline with LAYOUT_ortho_4x12 --- layouts/community/ortho_4x12/bocaj/keymap.c | 6 +++--- users/bocaj/wrappers.h | 14 +++++++------- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/layouts/community/ortho_4x12/bocaj/keymap.c b/layouts/community/ortho_4x12/bocaj/keymap.c index 0ac22b4ccf1..89d4d1d9ab6 100644 --- a/layouts/community/ortho_4x12/bocaj/keymap.c +++ b/layouts/community/ortho_4x12/bocaj/keymap.c @@ -87,21 +87,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ___________________LOWER_L1_EXT____________________, ___________________LOWER_R1_EXT____________________, ___________________LOWER_L2_EXT____________________, ___________________LOWER_R2_EXT____________________, ___________________LOWER_L3_EXT____________________, ___________________LOWER_R3_EXT____________________, - _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_COMM, _______, _______ + _______, _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_COMM, _______, _______ ), [_RAISE] = LAYOUT_ortho_4x12_bocaj( KC_TILD, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_EQUAL, KC_F11, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_F12, _______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [_ADJUST] = WRAPPER_ortho_4x12( KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, TH_LVL, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL, - HPT_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + HPT_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/users/bocaj/wrappers.h b/users/bocaj/wrappers.h index c76820f4950..0f18d346a39 100644 --- a/users/bocaj/wrappers.h +++ b/users/bocaj/wrappers.h @@ -12,7 +12,7 @@ expanded before being used as arguments to the LAYOUT_xxx macro. // clang-format off #define WRAPPER_ergodox_pretty(...) LAYOUT_ergodox_pretty(__VA_ARGS__) -#define WRAPPER_ortho_4x12(...) LAYOUT_planck_mit(__VA_ARGS__) +#define WRAPPER_ortho_4x12(...) LAYOUT_ortho_4x12(__VA_ARGS__) /* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */ #define WRAPPER_ergodox_bocaj( \ @@ -62,25 +62,25 @@ expanded before being used as arguments to the LAYOUT_xxx macro. K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C \ )\ WRAPPER_ortho_4x12( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ K11, K12, SFT_T(K13), GUI_T(K14), ALT_T(K15), K16, K17, ALT_T(K18), GUI_T(K19), SFT_T(K1A), K1B, K1C, \ K21, CTL_T(K22), K23, K24, K25, K26, K27, K28, K29, K2A, CTL_T(K2B), K2C, \ - K31, K32, K33, K34, LT(_LOWER, K35), K36, LT(_RAISE, K37), K38, K39, K3A, K3B ) + K31, K32, K33, K34, LT(_LOWER, K35), K36, K37, LT(_RAISE, K38), K39, K3A, K3B, K3C ) #define WRAPPER_planck_bocaj_WIN( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ - K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C \ )\ WRAPPER_ortho_4x12( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ K11, K12, SFT_T(K13), CTL_T(K14), ALT_T(K15), K16, K17, ALT_T(K18), CTL_T(K19), SFT_T(K1A), K1B, K1C, \ K21, GUI_T(K22), K23, K24, K25, K26, K27, K28, K29, K2A, GUI_T(K2B), K2C, \ - K31, K32, K33, K34, LT(_LOWER, K35), K36, LT(_RAISE, K37), K38, K39, K3A, K3B ) + K31, K32, K33, K34, LT(_LOWER, K35), K36, K37, LT(_RAISE, K38), K39, K3A, K3B, K3C ) #define WRAPPER_planck_bocaj_base( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ @@ -91,7 +91,7 @@ expanded before being used as arguments to the LAYOUT_xxx macro. KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \ KC_TAB, K11, K12, K13, K14, ALL_T(K15), MEH_T(K16), K17, K18, K19, K1A, KC_QUOT, \ KC_LSFT, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, _______, \ - _______, KC_LEAD, KC_UP, KC_LEFT, KC_BSPC, KC_SPC, KC_ENTER, KC_RIGHT, KC_DOWN, QWERTY, WORKMAN \ + _______, KC_LEAD, KC_UP, KC_LEFT, KC_BSPC, KC_SPC, KC_SPC, KC_ENTER, KC_RIGHT, KC_DOWN, QWERTY, WORKMAN \ ) #define WRAPPER_planck_bocaj_base_WIN( \ @@ -103,7 +103,7 @@ expanded before being used as arguments to the LAYOUT_xxx macro. KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \ KC_TAB, K11, K12, K13, K14, ALL_T(K15), MEH_T(K16), K17, K18, K19, K1A, KC_QUOT, \ KC_LSFT, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, _______, \ - _______, KC_LEAD, KC_UP, KC_LEFT, KC_BSPC, KC_SPC, KC_ENTER, KC_RIGHT, KC_DOWN, QWERTY, WORKMAN \ + _______, KC_LEAD, KC_UP, KC_LEFT, KC_BSPC, KC_SPC, KC_SPC, KC_ENTER, KC_RIGHT, KC_DOWN, QWERTY, WORKMAN \ ) /* From c9b3619299aaf335e8acde834d687f112b11e8b6 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:41:10 -0800 Subject: [PATCH 101/145] change LAYOUT_planck_grid to LAYOUT_ortho_4x12 --- layouts/community/ortho_4x12/jackhumbert/keymap.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/layouts/community/ortho_4x12/jackhumbert/keymap.c b/layouts/community/ortho_4x12/jackhumbert/keymap.c index 8f07e375a00..f9a3e1686ff 100644 --- a/layouts/community/ortho_4x12/jackhumbert/keymap.c +++ b/layouts/community/ortho_4x12/jackhumbert/keymap.c @@ -43,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Shft | Ctrl | Alt | GUI |Lower | Shft | Spc |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ -[_COLEMAK] = LAYOUT_planck_grid( +[_COLEMAK] = LAYOUT_ortho_4x12( KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, KC_MINS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ESC, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , @@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_SHIFT_COLEMAK] = LAYOUT_planck_grid( +[_SHIFT_COLEMAK] = LAYOUT_ortho_4x12( S(KC_TAB), S(KC_Q), S(KC_W), S(KC_F), S(KC_P), S(KC_G), S(KC_J), S(KC_L), S(KC_U), S(KC_Y), KC_COLN, _______, S(KC_MINS), S(KC_A), S(KC_R), S(KC_S), S(KC_T), S(KC_D), S(KC_H), S(KC_N), S(KC_E), S(KC_I), S(KC_O), KC_GRV, S(KC_ESC), S(KC_Z), S(KC_X), S(KC_C), S(KC_V), S(KC_B), S(KC_K), S(KC_M), KC_EXLM, KC_AT, KC_QUES, _______ , @@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | Home | Pgup | Pgdn | End | * `-----------------------------------------------------------------------------------' */ -[_LOWER] = LAYOUT_planck_grid( +[_LOWER] = LAYOUT_ortho_4x12( _______, XXXXXXX, KC_7, KC_8, KC_9, XXXXXXX, KC_DEL, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, XXXXXXX, KC_4, KC_5, KC_6, XXXXXXX, XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, KC_0, KC_1, KC_2, KC_3, XXXXXXX, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, _______, @@ -98,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ -[_RAISE] = LAYOUT_planck_grid( +[_RAISE] = LAYOUT_ortho_4x12( _______, XXXXXXX, KC_LT, KC_DLR, KC_GT, XXXXXXX, XXXXXXX, KC_LBRC, KC_UNDS, KC_RBRC, XXXXXXX, _______, _______, KC_BSLS, KC_LPRN, KC_DQUO, KC_RPRN, KC_HASH, KC_PERC, KC_LCBR, KC_EQL, KC_RCBR, KC_PIPE, _______, _______, XXXXXXX, KC_COLN, KC_ASTR, KC_PLUS, XXXXXXX, XXXXXXX, KC_AMPR, KC_CIRC, KC_TILD, XXXXXXX, _______, @@ -117,7 +117,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ -[_ADJUST] = LAYOUT_planck_grid( +[_ADJUST] = LAYOUT_ortho_4x12( _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, XXXXXXX, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, XXXXXXX, XXXXXXX, _______, From 361a2cf8a558d4de28f8264beef3594bc517e823 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:41:47 -0800 Subject: [PATCH 102/145] check for BACKLIGHT_ENABLE so this works on all keyboards --- layouts/community/ortho_4x12/juno/keymap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/layouts/community/ortho_4x12/juno/keymap.c b/layouts/community/ortho_4x12/juno/keymap.c index a22c229e292..2b16b9955e6 100644 --- a/layouts/community/ortho_4x12/juno/keymap.c +++ b/layouts/community/ortho_4x12/juno/keymap.c @@ -240,6 +240,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { layer_state_t layer_state_set_user(layer_state_t state) { // LED control, lighting up when Fn layer is activated state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +# ifdef BACKLIGHT_ENABLE switch (get_highest_layer(state)) { case _QWERTY: backlight_set(0); @@ -251,6 +252,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { backlight_set(3); break; } +# endif return state; } From 2f79cf9247d9388b0ae7e149e9b597f43bb87e2d Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:42:22 -0800 Subject: [PATCH 103/145] add missing _MACRO to users/brandonschlack/brandonschlack.h --- users/brandonschlack/brandonschlack.h | 1 + 1 file changed, 1 insertion(+) diff --git a/users/brandonschlack/brandonschlack.h b/users/brandonschlack/brandonschlack.h index d7dbc0ea4b9..4fbf6906d86 100644 --- a/users/brandonschlack/brandonschlack.h +++ b/users/brandonschlack/brandonschlack.h @@ -46,6 +46,7 @@ enum bs_layers { _ADJUST = 15 // 15: Change keyboard settings }; +#define _MACRO _M1 #define _LOWER _FN1 #define _RAISE _FN2 From 424d59bc7e17da50424f8fcce6244de39b45e644 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:43:13 -0800 Subject: [PATCH 104/145] rename callum's custom keycode that conflicts with a LUFA define --- users/callum/callum.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/users/callum/callum.c b/users/callum/callum.c index 4661902af54..b3254a9cfaa 100644 --- a/users/callum/callum.c +++ b/users/callum/callum.c @@ -10,7 +10,7 @@ #define TABL G(S(KC_LBRC)) #define TABR G(S(KC_RBRC)) #define SPCL A(G(KC_LEFT)) -#define SPCR A(G(KC_RGHT)) +#define SPC_R A(G(KC_RGHT)) #define LA_SYM MO(SYM) #define LA_NAV MO(NAV) @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [NAV] = LAYOUT_callum( KC_TAB, SW_WIN, TABL, TABR, KC_VOLU, RESET, HOME, KC_UP, END, KC_DEL, OS_SHFT, OS_CTRL, OS_ALT, OS_CMD, KC_VOLD, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC, - SPCL, SPCR, BACK, FWD, KC_MPLY, XXXXXXX, KC_PGDN, KC_PGUP, SW_LANG, KC_ENT, + SPCL, SPC_R, BACK, FWD, KC_MPLY, XXXXXXX, KC_PGDN, KC_PGUP, SW_LANG, KC_ENT, _______, _______, _______, _______ ), From 051c0774f8663e6090392b691ce0afc8c3a0574f Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 16 Jan 2021 18:44:03 -0800 Subject: [PATCH 105/145] undef TAPPING_TERM in users/hvp/hvp.h --- users/hvp/hvp.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/users/hvp/hvp.h b/users/hvp/hvp.h index 99da258aafb..b016da9e252 100644 --- a/users/hvp/hvp.h +++ b/users/hvp/hvp.h @@ -5,8 +5,9 @@ #endif #include "quantum.h" +#undef TAPPING_TERM #define TAPPING_TERM 150 // Keys -#define D_NAVI MT(MOD_LCTL | MOD_LSFT, KC_D) \ No newline at end of file +#define D_NAVI MT(MOD_LCTL | MOD_LSFT, KC_D) From ef6329af7c7be77b537fbfc5a5cc7105acc679f7 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 31 Jan 2021 12:46:00 -0800 Subject: [PATCH 106/145] Create a system to map between info.json and config.h/rules.mk (#11548) * generate rules.mk from a json mapping * generate rules.mk from a json mapping * support for config.h from json maps * improve the mapping system * document the mapping system * move data/maps to data/mappings * fix flake8 errors * fixup LED_MATRIX_DRIVER * remove product and description from the vision_division keymap level * reduce the complexity of generate-rules-mk * add tests for the generate commands * fix qmk doctor when submodules are not clean --- bin/qmk | 3 +- data/mappings/info_config.json | 42 +++ data/mappings/info_rules.json | 15 + docs/data_driven_config.md | 44 ++- keyboards/handwired/pytest/basic/info.json | 10 + .../vision_division/keymaps/default/config.h | 1 - lib/python/qmk/cli/doctor.py | 4 +- lib/python/qmk/cli/generate/config_h.py | 239 +++--------- lib/python/qmk/cli/generate/rules_mk.py | 61 +-- lib/python/qmk/constants.py | 2 +- lib/python/qmk/info.py | 347 ++++++------------ lib/python/qmk/tests/test_cli_commands.py | 29 ++ requirements.txt | 1 + 13 files changed, 338 insertions(+), 460 deletions(-) create mode 100644 data/mappings/info_config.json create mode 100644 data/mappings/info_rules.json create mode 100644 keyboards/handwired/pytest/basic/info.json diff --git a/bin/qmk b/bin/qmk index 801852d4e8d..a3c1be328ad 100755 --- a/bin/qmk +++ b/bin/qmk @@ -27,7 +27,8 @@ def _check_modules(requirements): line = line.split('#')[0] module = dict() - module['name'] = module['import'] = line.split('=')[0] if '=' in line else line + module['name'] = line.split('=')[0] if '=' in line else line + module['import'] = module['name'].replace('-', '_') # Not every module is importable by its own name. if module['name'] == "pep8-naming": diff --git a/data/mappings/info_config.json b/data/mappings/info_config.json new file mode 100644 index 00000000000..885e6d02569 --- /dev/null +++ b/data/mappings/info_config.json @@ -0,0 +1,42 @@ +# This file maps keys between `config.h` and `info.json`. It is used by QMK +# to correctly and consistently map back and forth between the two systems. +{ + # Format: + # : {"info_key": , ["value_type": ], ["to_json": ], ["to_c": ]} + # value_type: one of "array", "array.int", "int", "hex", "list", "mapping" + # to_json: Default `true`. Set to `false` to exclude this mapping from info.json + # to_c: Default `true`. Set to `false` to exclude this mapping from config.h + # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places + "DEBOUNCE": {"info_key": "debounce", "value_type": "int"} + "DEVICE_VER": {"info_key": "usb.device_ver", "value_type": "hex"}, + "DESCRIPTION": {"info_key": "keyboard_folder", "to_json": false}, + "DIODE_DIRECTION": {"info_key": "diode_direction"}, + "LAYOUTS": {"info_key": "layout_aliases", "value_type": "mapping"}, + "LED_CAPS_LOCK_PIN": {"info_key": "indicators.caps_lock"}, + "LED_NUM_LOCK_PIN": {"info_key": "indicators.num_lock"}, + "LED_SCROLL_LOCK_PIN": {"info_key": "indicators.scroll_lock"}, + "MANUFACTURER": {"info_key": "manufacturer"}, + "RGB_DI_PIN": {"info_key": "rgblight.pin"}, + "RGBLED_NUM": {"info_key": "rgblight.led_count", "value_type": "int"}, + "RGBLED_SPLIT": {"info_key": "rgblight.split_count", "value_type": "array.int"}, + "RGBLIGHT_ANIMATIONS": {"info_key": "rgblight.animations.all", "value_type": "bool"}, + "RGBLIGHT_EFFECT_ALTERNATING": {"info_key": "rgblight.animations.alternating", "value_type": "bool"}, + "RGBLIGHT_EFFECT_BREATHING": {"info_key": "rgblight.animations.breathing", "value_type": "bool"}, + "RGBLIGHT_EFFECT_CHRISTMAS": {"info_key": "rgblight.animations.christmas", "value_type": "bool"}, + "RGBLIGHT_EFFECT_KNIGHT": {"info_key": "rgblight.animations.knight", "value_type": "bool"}, + "RGBLIGHT_EFFECT_RAINBOW_MOOD": {"info_key": "rgblight.animations.rainbow_mood", "value_type": "bool"}, + "RGBLIGHT_EFFECT_RAINBOW_SWIRL": {"info_key": "rgblight.animations.rainbow_swirl", "value_type": "bool"}, + "RGBLIGHT_EFFECT_RGB_TEST": {"info_key": "rgblight.animations.rgb_test", "value_type": "bool"}, + "RGBLIGHT_EFFECT_SNAKE": {"info_key": "rgblight.animations.snake", "value_type": "bool"}, + "RGBLIGHT_EFFECT_STATIC_GRADIENT": {"info_key": "rgblight.animations.static_gradient", "value_type": "bool"}, + "RGBLIGHT_EFFECT_TWINKLE": {"info_key": "rgblight.animations.twinkle"}, + "RGBLIGHT_LIMIT_VAL": {"info_key": "rgblight.max_brightness", "value_type": "int"}, + "RGBLIGHT_HUE_STEP": {"info_key": "rgblight.hue_steps", "value_type": "int"}, + "RGBLIGHT_SAT_STEP": {"info_key": "rgblight.saturation_steps", "value_type": "int"}, + "RGBLIGHT_VAL_STEP": {"info_key": "rgblight.brightness_steps", "value_type": "int"}, + "RGBLIGHT_SLEEP": {"info_key": "rgblight.sleep", "value_type": "bool"}, + "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"}, + "PRODUCT": {"info_key": "keyboard_folder", "to_json": false}, + "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex"}, + "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"} +} diff --git a/data/mappings/info_rules.json b/data/mappings/info_rules.json new file mode 100644 index 00000000000..97f772c4d5b --- /dev/null +++ b/data/mappings/info_rules.json @@ -0,0 +1,15 @@ +# This file maps keys between `rules.mk` and `info.json`. It is used by QMK +# to correctly and consistently map back and forth between the two systems. +{ + # Format: + # : {"info_key": , ["value_type": ], ["to_json": ], ["to_c": ]} + # value_type: one of "array", "array.int", "int", "list", "hex", "mapping" + # to_json: Default `true`. Set to `false` to exclude this mapping from info.json + # to_c: Default `true`. Set to `false` to exclude this mapping from rules.mk + # warn_duplicate: Default `true`. Set to `false` to turn off warning when a value exists in both places + "BOARD": {"info_key": "board"}, + "BOOTLOADER": {"info_key": "bootloader", "warn_duplicate": false}, + "LAYOUTS": {"info_key": "community_layouts", "value_type": "list"}, + "LED_MATRIX_DRIVER": {"info_key": "led_matrix.driver"}, + "MCU": {"info_key": "processor", "warn_duplicate": false}, +} diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md index 7e4f2328469..c2ad4fed8fc 100644 --- a/docs/data_driven_config.md +++ b/docs/data_driven_config.md @@ -12,17 +12,18 @@ Now we have support for generating `rules.mk` and `config.h` values from `info.j ## Overview -On the C side of things nothing really changes. When you need to create a new rule or define you follow the same process: +On the C side of things nothing changes. When you need to create a new rule or define you follow the same process: 1. Add it to `docs/config_options.md` 1. Set a default in the appropriate core file -1. Add your `ifdef` and/or `#ifdef` statements as needed +1. Add your ifdef statements as needed You will then need to add support for your new configuration to `info.json`. The basic process is: 1. Add it to the schema in `data/schemas/keyboards.jsonschema` -1. Add code to extract it from `config.h`/`rules.mk` to `lib/python/qmk/info.py` -1. Add code to generate it to one of: +1. Add a mapping in `data/maps` +1. (optional and discoraged) Add code to extract/generate it to: + * `lib/python/qmk/info.py` * `lib/python/qmk/cli/generate/config_h.py` * `lib/python/qmk/cli/generate/rules_mk.py` @@ -32,12 +33,43 @@ This section describes adding support for a `config.h`/`rules.mk` value to info. ### Add it to the schema -QMK maintains schema files in `data/schemas`. The values that go into keyboard-specific `info.json` files are kept in `keyboard.jsonschema`. Any value you want to make available to end users to edit must go in here. +QMK maintains [jsonschema](https://json-schema.org/) files in `data/schemas`. The values that go into keyboard-specific `info.json` files are kept in `keyboard.jsonschema`. Any value you want to make available to end users to edit must go in here. -In some cases you can simply add a new top-level key. Some examples to follow are `keyboard_name`, `maintainer`, `processor`, and `url`. This is appropriate when your option is self-contained and not directly related to other options. In other cases you should group like options together in an `object`. This is particularly true when adding support for a feature. Some examples to follow for this are `indicators`, `matrix_pins`, and `rgblight`. If you are not sure how to integrate your new option(s) [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there. +In some cases you can simply add a new top-level key. Some examples to follow are `keyboard_name`, `maintainer`, `processor`, and `url`. This is appropriate when your option is self-contained and not directly related to other options. + +In other cases you should group like options together in an `object`. This is particularly true when adding support for a feature. Some examples to follow for this are `indicators`, `matrix_pins`, and `rgblight`. If you are not sure how to integrate your new option(s) [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there. + +### Add a mapping + +In most cases you can add a simple mapping. These are maintained as JSON files in `data/mappings/info_config.json` and `data/mappings/info_rules.json`, and control mapping for `config.h` and `rules.mk`, respectively. Each mapping is keyed by the `config.h` or `rules.mk` variable, and the value is a hash with the following keys: + +* `info_key`: (required) The location within `info.json` for this value. See below. +* `value_type`: (optional) Default `str`. The format for this variable's value. See below. +* `to_json`: (optional) Default `true`. Set to `false` to exclude this mapping from info.json +* `to_c`: (optional) Default `true`. Set to `false` to exclude this mapping from config.h +* `warn_duplicate`: (optional) Default `true`. Set to `false` to turn off warning when a value exists in both places + +#### Info Key + +We use JSON dot notation to address variables within info.json. For example, to access `info_json["rgblight"]["split_count"]` I would specify `rgblight.split_count`. This allows you to address deeply nested keys with a simple string. + +Under the hood we use [Dotty Dict](https://dotty-dict.readthedocs.io/en/latest/), you can refer to that documentation for how these strings are converted to object access. + +#### Value Types + +By default we treat all values as simple strings. If your value is more complex you can use one of these types to intelligently parse the data: + +* `array`: A comma separated array of strings +* `array.int`: A comma separated array of integers +* `int`: An integer +* `hex`: A number formatted as hex +* `list`: A space separate array of strings +* `mapping`: A hash of key/value pairs ### Add code to extract it +Most use cases can be solved by the mapping files described above. If yours can't you can instead write code to extract your config values. + Whenever QMK generates a complete `info.json` it extracts information from `config.h` and `rules.mk`. You will need to add code for your new config value to `lib/python/qmk/info.py`. Typically this means adding a new `_extract_()` function and then calling your function in either `_extract_config_h()` or `_extract_rules_mk()`. If you are not sure how to edit this file or are not comfortable with Python [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and someone can help you with this part. diff --git a/keyboards/handwired/pytest/basic/info.json b/keyboards/handwired/pytest/basic/info.json new file mode 100644 index 00000000000..ed052a14a3e --- /dev/null +++ b/keyboards/handwired/pytest/basic/info.json @@ -0,0 +1,10 @@ +{ + "maintainer": "qmk", + "layouts": { + "LAYOUT_custom": { + "layout": [ + { "label": "KC_Q", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 } + ] + } + } +} diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h index b8f22a3b5f3..aa8fc62aa00 100644 --- a/keyboards/vision_division/keymaps/default/config.h +++ b/keyboards/vision_division/keymaps/default/config.h @@ -8,7 +8,6 @@ #define VENDOR_ID 0xFEED #define DEVICE_VER 0x0001 #define MANUFACTURER IBNobody -#define PRODUCT Vision Division #define MATRIX_ROWS 6 #define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 } diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 70f32911a4f..28d480707c2 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -107,9 +107,9 @@ def doctor(cli): submodules.update() sub_ok = check_submodules() - if CheckStatus.ERROR in sub_ok: + if sub_ok == CheckStatus.ERROR: status = CheckStatus.ERROR - elif CheckStatus.WARNING in sub_ok and status == CheckStatus.OK: + elif sub_ok == CheckStatus.WARNING and status == CheckStatus.OK: status = CheckStatus.WARNING # Report a summary of our findings to the user diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index 1de84de7a91..7ddad745d1b 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -1,62 +1,14 @@ """Used by the make system to generate info_config.h from info.json. """ +from pathlib import Path + +from dotty_dict import dotty from milc import cli -from qmk.constants import LED_INDICATORS from qmk.decorators import automagic_keyboard, automagic_keymap -from qmk.info import info_json, rgblight_animations, rgblight_properties, rgblight_toggles +from qmk.info import _json_load, info_json from qmk.path import is_keyboard, normpath -usb_prop_map = { - 'vid': 'VENDOR_ID', - 'pid': 'PRODUCT_ID', - 'device_ver': 'DEVICE_VER', -} - - -def debounce(debounce): - """Return the config.h lines that set debounce - """ - return """ -#ifndef DEBOUNCE -# define DEBOUNCE %s -#endif // DEBOUNCE -""" % debounce - - -def diode_direction(diode_direction): - """Return the config.h lines that set diode direction - """ - return """ -#ifndef DIODE_DIRECTION -# define DIODE_DIRECTION %s -#endif // DIODE_DIRECTION -""" % diode_direction - - -def keyboard_name(keyboard_name): - """Return the config.h lines that set the keyboard's name. - """ - return """ -#ifndef DESCRIPTION -# define DESCRIPTION %s -#endif // DESCRIPTION - -#ifndef PRODUCT -# define PRODUCT %s -#endif // PRODUCT -""" % (keyboard_name.replace("'", ""), keyboard_name.replace("'", "")) - - -def manufacturer(manufacturer): - """Return the config.h lines that set the manufacturer. - """ - return """ -#ifndef MANUFACTURER -# define MANUFACTURER %s -#endif // MANUFACTURER -""" % (manufacturer.replace("'", "")) - def direct_pins(direct_pins): """Return the config.h lines that set the direct pins. @@ -72,80 +24,34 @@ def direct_pins(direct_pins): return """ #ifndef MATRIX_COLS -# define MATRIX_COLS %s +# define MATRIX_COLS %s #endif // MATRIX_COLS #ifndef MATRIX_ROWS -# define MATRIX_ROWS %s +# define MATRIX_ROWS %s #endif // MATRIX_ROWS #ifndef DIRECT_PINS -# define DIRECT_PINS {%s} +# define DIRECT_PINS {%s} #endif // DIRECT_PINS """ % (col_count, row_count, ','.join(rows)) -def col_pins(col_pins): - """Return the config.h lines that set the column pins. +def pin_array(define, pins): + """Return the config.h lines that set a pin array. """ - cols = ','.join(map(str, [pin or 'NO_PIN' for pin in col_pins])) - col_num = len(col_pins) + pin_num = len(pins) + pin_array = ', '.join(map(str, [pin or 'NO_PIN' for pin in pins])) - return """ -#ifndef MATRIX_COLS -# define MATRIX_COLS %s -#endif // MATRIX_COLS + return f""" +#ifndef {define}S +# define {define}S {pin_num} +#endif // {define}S -#ifndef MATRIX_COL_PINS -# define MATRIX_COL_PINS {%s} -#endif // MATRIX_COL_PINS -""" % (col_num, cols) - - -def row_pins(row_pins): - """Return the config.h lines that set the row pins. - """ - rows = ','.join(map(str, [pin or 'NO_PIN' for pin in row_pins])) - row_num = len(row_pins) - - return """ -#ifndef MATRIX_ROWS -# define MATRIX_ROWS %s -#endif // MATRIX_ROWS - -#ifndef MATRIX_ROW_PINS -# define MATRIX_ROW_PINS {%s} -#endif // MATRIX_ROW_PINS -""" % (row_num, rows) - - -def indicators(config): - """Return the config.h lines that setup LED indicators. - """ - defines = [] - - for led, define in LED_INDICATORS.items(): - if led in config: - defines.append('') - defines.append('#ifndef %s' % (define,)) - defines.append('# define %s %s' % (define, config[led])) - defines.append('#endif // %s' % (define,)) - - return '\n'.join(defines) - - -def layout_aliases(layout_aliases): - """Return the config.h lines that setup layout aliases. - """ - defines = [] - - for alias, layout in layout_aliases.items(): - defines.append('') - defines.append('#ifndef %s' % (alias,)) - defines.append('# define %s %s' % (alias, layout)) - defines.append('#endif // %s' % (alias,)) - - return '\n'.join(defines) +#ifndef {define}_PINS +# define {define}_PINS {{ {pin_array} }} +#endif // {define}_PINS +""" def matrix_pins(matrix_pins): @@ -157,58 +63,14 @@ def matrix_pins(matrix_pins): pins.append(direct_pins(matrix_pins['direct'])) if 'cols' in matrix_pins: - pins.append(col_pins(matrix_pins['cols'])) + pins.append(pin_array('MATRIX_COL', matrix_pins['cols'])) if 'rows' in matrix_pins: - pins.append(row_pins(matrix_pins['rows'])) + pins.append(pin_array('MATRIX_ROW', matrix_pins['rows'])) return '\n'.join(pins) -def rgblight(config): - """Return the config.h lines that setup rgblight. - """ - rgblight_config = [] - - for json_key, config_key in rgblight_properties.items(): - if json_key in config: - rgblight_config.append('') - rgblight_config.append('#ifndef %s' % (config_key[0],)) - rgblight_config.append('# define %s %s' % (config_key[0], config[json_key])) - rgblight_config.append('#endif // %s' % (config_key[0],)) - - for json_key, config_key in rgblight_toggles.items(): - if config.get(json_key): - rgblight_config.append('') - rgblight_config.append('#ifndef %s' % (config_key,)) - rgblight_config.append('# define %s' % (config_key,)) - rgblight_config.append('#endif // %s' % (config_key,)) - - for json_key, config_key in rgblight_animations.items(): - if 'animations' in config and config['animations'].get(json_key): - rgblight_config.append('') - rgblight_config.append('#ifndef %s' % (config_key,)) - rgblight_config.append('# define %s' % (config_key,)) - rgblight_config.append('#endif // %s' % (config_key,)) - - return '\n'.join(rgblight_config) - - -def usb_properties(usb_props): - """Return the config.h lines that setup USB params. - """ - usb_lines = [] - - for info_name, config_name in usb_prop_map.items(): - if info_name in usb_props: - usb_lines.append('') - usb_lines.append('#ifndef ' + config_name) - usb_lines.append('# define %s %s' % (config_name, usb_props[info_name])) - usb_lines.append('#endif // ' + config_name) - - return '\n'.join(usb_lines) - - @cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") @cli.argument('-kb', '--keyboard', help='Keyboard to generate config.h for.') @@ -228,39 +90,52 @@ def generate_config_h(cli): cli.log.error('Invalid keyboard: "%s"', cli.config.generate_config_h.keyboard) return False - # Build the info.json file - kb_info_json = info_json(cli.config.generate_config_h.keyboard) - # Build the info_config.h file. + kb_info_json = dotty(info_json(cli.config.generate_config_h.keyboard)) + info_config_map = _json_load(Path('data/mappings/info_config.json')) + config_h_lines = ['/* This file was generated by `qmk generate-config-h`. Do not edit or copy.' ' */', '', '#pragma once'] - if 'debounce' in kb_info_json: - config_h_lines.append(debounce(kb_info_json['debounce'])) + # Iterate through the info_config map to generate basic things + for config_key, info_dict in info_config_map.items(): + info_key = info_dict['info_key'] + key_type = info_dict.get('value_type', 'str') + to_config = info_dict.get('to_config', True) - if 'diode_direction' in kb_info_json: - config_h_lines.append(diode_direction(kb_info_json['diode_direction'])) + if not to_config: + continue - if 'indicators' in kb_info_json: - config_h_lines.append(indicators(kb_info_json['indicators'])) + try: + config_value = kb_info_json[info_key] + except KeyError: + continue - if 'keyboard_name' in kb_info_json: - config_h_lines.append(keyboard_name(kb_info_json['keyboard_name'])) - - if 'layout_aliases' in kb_info_json: - config_h_lines.append(layout_aliases(kb_info_json['layout_aliases'])) - - if 'manufacturer' in kb_info_json: - config_h_lines.append(manufacturer(kb_info_json['manufacturer'])) - - if 'rgblight' in kb_info_json: - config_h_lines.append(rgblight(kb_info_json['rgblight'])) + if key_type.startswith('array'): + config_h_lines.append('') + config_h_lines.append(f'#ifndef {config_key}') + config_h_lines.append(f'# define {config_key} {{ {", ".join(map(str, config_value))} }}') + config_h_lines.append(f'#endif // {config_key}') + elif key_type == 'bool': + if config_value: + config_h_lines.append('') + config_h_lines.append(f'#ifndef {config_key}') + config_h_lines.append(f'# define {config_key}') + config_h_lines.append(f'#endif // {config_key}') + elif key_type == 'mapping': + for key, value in config_value.items(): + config_h_lines.append('') + config_h_lines.append(f'#ifndef {key}') + config_h_lines.append(f'# define {key} {value}') + config_h_lines.append(f'#endif // {key}') + else: + config_h_lines.append('') + config_h_lines.append(f'#ifndef {config_key}') + config_h_lines.append(f'# define {config_key} {config_value}') + config_h_lines.append(f'#endif // {config_key}') if 'matrix_pins' in kb_info_json: config_h_lines.append(matrix_pins(kb_info_json['matrix_pins'])) - if 'usb' in kb_info_json: - config_h_lines.append(usb_properties(kb_info_json['usb'])) - # Show the results config_h = '\n'.join(config_h_lines) diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index b262e3c6661..af740f341da 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -1,16 +1,37 @@ """Used by the make system to generate a rules.mk """ +from pathlib import Path + +from dotty_dict import dotty from milc import cli from qmk.decorators import automagic_keyboard, automagic_keymap -from qmk.info import info_json +from qmk.info import _json_load, info_json from qmk.path import is_keyboard, normpath -info_to_rules = { - 'board': 'BOARD', - 'bootloader': 'BOOTLOADER', - 'processor': 'MCU', -} + +def process_mapping_rule(kb_info_json, rules_key, info_dict): + """Return the rules.mk line(s) for a mapping rule. + """ + if not info_dict.get('to_c', True): + return None + + info_key = info_dict['info_key'] + key_type = info_dict.get('value_type', 'str') + + try: + rules_value = kb_info_json[info_key] + except KeyError: + return None + + if key_type == 'array': + return f'{rules_key} ?= {" ".join(rules_value)}' + elif key_type == 'bool': + return f'{rules_key} ?= {"on" if rules_value else "off"}' + elif key_type == 'mapping': + return '\n'.join([f'{key} ?= {value}' for key, value in rules_value.items()]) + + return f'{rules_key} ?= {rules_value}' @cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to') @@ -22,7 +43,6 @@ info_to_rules = { def generate_rules_mk(cli): """Generates a rules.mk file from info.json. """ - # Determine our keyboard(s) if not cli.config.generate_rules_mk.keyboard: cli.log.error('Missing paramater: --keyboard') cli.subcommands['info'].print_help() @@ -32,16 +52,18 @@ def generate_rules_mk(cli): cli.log.error('Invalid keyboard: "%s"', cli.config.generate_rules_mk.keyboard) return False - # Build the info.json file - kb_info_json = info_json(cli.config.generate_rules_mk.keyboard) + kb_info_json = dotty(info_json(cli.config.generate_rules_mk.keyboard)) + info_rules_map = _json_load(Path('data/mappings/info_rules.json')) rules_mk_lines = ['# This file was generated by `qmk generate-rules-mk`. Do not edit or copy.', ''] - # Bring in settings - for info_key, rule_key in info_to_rules.items(): - if info_key in kb_info_json: - rules_mk_lines.append(f'{rule_key} ?= {kb_info_json[info_key]}') + # Iterate through the info_rules map to generate basic rules + for rules_key, info_dict in info_rules_map.items(): + new_entry = process_mapping_rule(kb_info_json, rules_key, info_dict) - # Find features that should be enabled + if new_entry: + rules_mk_lines.append(new_entry) + + # Iterate through features to enable/disable them if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): if feature == 'bootmagic_lite' and enabled: @@ -51,15 +73,6 @@ def generate_rules_mk(cli): enabled = 'yes' if enabled else 'no' rules_mk_lines.append(f'{feature}_ENABLE ?= {enabled}') - # Set the LED driver - if 'led_matrix' in kb_info_json and 'driver' in kb_info_json['led_matrix']: - driver = kb_info_json['led_matrix']['driver'] - rules_mk_lines.append(f'LED_MATRIX_DRIVER ?= {driver}') - - # Add community layouts - if 'community_layouts' in kb_info_json: - rules_mk_lines.append(f'LAYOUTS ?= {" ".join(kb_info_json["community_layouts"])}') - # Show the results rules_mk = '\n'.join(rules_mk_lines) + '\n' @@ -72,7 +85,7 @@ def generate_rules_mk(cli): if cli.args.quiet: print(cli.args.output) else: - cli.log.info('Wrote info_config.h to %s.', cli.args.output) + cli.log.info('Wrote rules.mk to %s.', cli.args.output) else: print(rules_mk) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index cb946135628..8a177eb6b51 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -27,7 +27,7 @@ ROW_LETTERS = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop' LED_INDICATORS = { 'caps_lock': 'LED_CAPS_LOCK_PIN', 'num_lock': 'LED_NUM_LOCK_PIN', - 'scrol_lock': 'LED_SCROLL_LOCK_PIN', + 'scroll_lock': 'LED_SCROLL_LOCK_PIN', } # Constants that should match their counterparts in make diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index cc81f7a0866..2accaba9e47 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -5,57 +5,18 @@ from collections.abc import Mapping from glob import glob from pathlib import Path +import hjson import jsonschema +from dotty_dict import dotty from milc import cli -from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS, LED_INDICATORS +from qmk.constants import CHIBIOS_PROCESSORS, LUFA_PROCESSORS, VUSB_PROCESSORS from qmk.c_parse import find_layouts from qmk.keyboard import config_h, rules_mk from qmk.keymap import list_keymaps from qmk.makefile import parse_rules_mk_file from qmk.math import compute -led_matrix_properties = { - 'driver_count': 'LED_DRIVER_COUNT', - 'driver_addr1': 'LED_DRIVER_ADDR_1', - 'driver_addr2': 'LED_DRIVER_ADDR_2', - 'driver_addr3': 'LED_DRIVER_ADDR_3', - 'driver_addr4': 'LED_DRIVER_ADDR_4', - 'led_count': 'LED_DRIVER_LED_COUNT', - 'timeout': 'ISSI_TIMEOUT', - 'persistence': 'ISSI_PERSISTENCE' -} - -rgblight_properties = { - 'led_count': ('RGBLED_NUM', int), - 'pin': ('RGB_DI_PIN', str), - 'max_brightness': ('RGBLIGHT_LIMIT_VAL', int), - 'hue_steps': ('RGBLIGHT_HUE_STEP', int), - 'saturation_steps': ('RGBLIGHT_SAT_STEP', int), - 'brightness_steps': ('RGBLIGHT_VAL_STEP', int) -} - -rgblight_toggles = { - 'sleep': 'RGBLIGHT_SLEEP', - 'split': 'RGBLIGHT_SPLIT', -} - -rgblight_animations = { - 'all': 'RGBLIGHT_ANIMATIONS', - 'alternating': 'RGBLIGHT_EFFECT_ALTERNATING', - 'breathing': 'RGBLIGHT_EFFECT_BREATHING', - 'christmas': 'RGBLIGHT_EFFECT_CHRISTMAS', - 'knight': 'RGBLIGHT_EFFECT_KNIGHT', - 'rainbow_mood': 'RGBLIGHT_EFFECT_RAINBOW_MOOD', - 'rainbow_swirl': 'RGBLIGHT_EFFECT_RAINBOW_SWIRL', - 'rgb_test': 'RGBLIGHT_EFFECT_RGB_TEST', - 'snake': 'RGBLIGHT_EFFECT_SNAKE', - 'static_gradient': 'RGBLIGHT_EFFECT_STATIC_GRADIENT', - 'twinkle': 'RGBLIGHT_EFFECT_TWINKLE' -} - -usb_properties = {'vid': 'VENDOR_ID', 'pid': 'PRODUCT_ID', 'device_ver': 'DEVICE_VER'} - true_values = ['1', 'on', 'yes'] false_values = ['0', 'off', 'no'] @@ -101,7 +62,6 @@ def info_json(keyboard): except jsonschema.ValidationError as e: json_path = '.'.join([str(p) for p in e.absolute_path]) cli.log.error('Invalid API data: %s: %s: %s', keyboard, json_path, e.message) - print(dir(e)) exit() # Make sure we have at least one layout @@ -132,7 +92,7 @@ def _json_load(json_file): Note: file must be a Path object. """ try: - return json.load(json_file.open()) + return hjson.load(json_file.open()) except json.decoder.JSONDecodeError as e: cli.log.error('Invalid JSON encountered attempting to load {fg_cyan}%s{fg_reset}:\n\t{fg_red}%s', json_file, e) @@ -172,65 +132,6 @@ def keyboard_api_validate(data): return validator(data) -def _extract_debounce(info_data, config_c): - """Handle debounce. - """ - if 'debounce' in info_data and 'DEBOUNCE' in config_c: - _log_warning(info_data, 'Debounce is specified in both info.json and config.h, the config.h value wins.') - - if 'DEBOUNCE' in config_c: - info_data['debounce'] = int(config_c['DEBOUNCE']) - - return info_data - - -def _extract_diode_direction(info_data, config_c): - """Handle the diode direction. - """ - if 'diode_direction' in info_data and 'DIODE_DIRECTION' in config_c: - _log_warning(info_data, 'Diode direction is specified in both info.json and config.h, the config.h value wins.') - - if 'DIODE_DIRECTION' in config_c: - info_data['diode_direction'] = config_c.get('DIODE_DIRECTION') - - return info_data - - -def _extract_indicators(info_data, config_c): - """Find the LED indicator information. - """ - for json_key, config_key in LED_INDICATORS.items(): - if json_key in info_data.get('indicators', []) and config_key in config_c: - _log_warning(info_data, f'Indicator {json_key} is specified in both info.json and config.h, the config.h value wins.') - - if 'indicators' not in info_data: - info_data['indicators'] = {} - - if config_key in config_c: - if 'indicators' not in info_data: - info_data['indicators'] = {} - - info_data['indicators'][json_key] = config_c.get(config_key) - - return info_data - - -def _extract_community_layouts(info_data, rules): - """Find the community layouts in rules.mk. - """ - community_layouts = rules['LAYOUTS'].split() if 'LAYOUTS' in rules else [] - - if 'community_layouts' in info_data: - for layout in community_layouts: - if layout not in info_data['community_layouts']: - community_layouts.append(layout) - - else: - info_data['community_layouts'] = community_layouts - - return info_data - - def _extract_features(info_data, rules): """Find all the features enabled in rules.mk. """ @@ -267,78 +168,6 @@ def _extract_features(info_data, rules): return info_data -def _extract_led_drivers(info_data, rules): - """Find all the LED drivers set in rules.mk. - """ - if 'LED_MATRIX_DRIVER' in rules: - if 'led_matrix' not in info_data: - info_data['led_matrix'] = {} - - if info_data['led_matrix'].get('driver'): - _log_warning(info_data, 'LED Matrix driver is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['led_matrix']['driver'] = rules['LED_MATRIX_DRIVER'] - - return info_data - - -def _extract_led_matrix(info_data, config_c): - """Handle the led_matrix configuration. - """ - led_matrix = info_data.get('led_matrix', {}) - - for json_key, config_key in led_matrix_properties.items(): - if config_key in config_c: - if json_key in led_matrix: - _log_warning(info_data, 'LED Matrix: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) - - led_matrix[json_key] = config_c[config_key] - - -def _extract_rgblight(info_data, config_c): - """Handle the rgblight configuration. - """ - rgblight = info_data.get('rgblight', {}) - animations = rgblight.get('animations', {}) - - if 'RGBLED_SPLIT' in config_c: - raw_split = config_c.get('RGBLED_SPLIT', '').replace('{', '').replace('}', '').strip() - rgblight['split_count'] = [int(i) for i in raw_split.split(',')] - - for json_key, config_key_type in rgblight_properties.items(): - config_key, config_type = config_key_type - - if config_key in config_c: - if json_key in rgblight: - _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) - - try: - rgblight[json_key] = config_type(config_c[config_key]) - except ValueError as e: - cli.log.error('%s: config.h: Could not convert "%s" to %s: %s', info_data['keyboard_folder'], config_c[config_key], config_type.__name__, e) - - for json_key, config_key in rgblight_toggles.items(): - if config_key in config_c and json_key in rgblight: - _log_warning(info_data, 'RGB Light: %s is specified in both info.json and config.h, the config.h value wins.', json_key) - - rgblight[json_key] = config_key in config_c - - for json_key, config_key in rgblight_animations.items(): - if config_key in config_c: - if json_key in animations: - _log_warning(info_data, 'RGB Light: animations: %s is specified in both info.json and config.h, the config.h value wins.' % (json_key,)) - - animations[json_key] = config_c[config_key] - - if animations: - rgblight['animations'] = animations - - if rgblight: - info_data['rgblight'] = rgblight - - return info_data - - def _pin_name(pin): """Returns the proper representation for a pin. """ @@ -426,34 +255,59 @@ def _extract_matrix_info(info_data, config_c): return info_data -def _extract_usb_info(info_data, config_c): - """Populate the USB information. - """ - if 'usb' not in info_data: - info_data['usb'] = {} - - for info_name, config_name in usb_properties.items(): - if config_name in config_c: - if info_name in info_data['usb']: - _log_warning(info_data, '%s in config.h is overwriting usb.%s in info.json' % (config_name, info_name)) - - info_data['usb'][info_name] = '0x' + config_c[config_name][2:].upper() - - return info_data - - def _extract_config_h(info_data): """Pull some keyboard information from existing config.h files """ config_c = config_h(info_data['keyboard_folder']) - _extract_debounce(info_data, config_c) - _extract_diode_direction(info_data, config_c) - _extract_indicators(info_data, config_c) + # Pull in data from the json map + dotty_info = dotty(info_data) + info_config_map = _json_load(Path('data/mappings/info_config.json')) + + for config_key, info_dict in info_config_map.items(): + info_key = info_dict['info_key'] + key_type = info_dict.get('value_type', 'str') + + try: + if config_key in config_c and info_dict.get('to_json', True): + if dotty_info.get(info_key) and info_dict.get('warn_duplicate', True): + _log_warning(info_data, '%s in config.h is overwriting %s in info.json' % (config_key, info_key)) + + if key_type.startswith('array'): + if '.' in key_type: + key_type, array_type = key_type.split('.', 1) + else: + array_type = None + + config_value = config_c[config_key].replace('{', '').replace('}', '').strip() + + if array_type == 'int': + dotty_info[info_key] = list(map(int, config_value.split(','))) + else: + dotty_info[info_key] = config_value.split(',') + + elif key_type == 'bool': + dotty_info[info_key] = config_c[config_key] in true_values + + elif key_type == 'hex': + dotty_info[info_key] = '0x' + config_c[config_key][2:].upper() + + elif key_type == 'list': + dotty_info[info_key] = config_c[config_key].split() + + elif key_type == 'int': + dotty_info[info_key] = int(config_c[config_key]) + + else: + dotty_info[info_key] = config_c[config_key] + + except Exception as e: + _log_warning(info_data, f'{config_key}->{info_key}: {e}') + + info_data.update(dotty_info) + + # Pull data that easily can't be mapped in json _extract_matrix_info(info_data, config_c) - _extract_usb_info(info_data, config_c) - _extract_led_matrix(info_data, config_c) - _extract_rgblight(info_data, config_c) return info_data @@ -462,21 +316,66 @@ def _extract_rules_mk(info_data): """Pull some keyboard information from existing rules.mk files """ rules = rules_mk(info_data['keyboard_folder']) - mcu = rules.get('MCU', info_data.get('processor')) + info_data['processor'] = rules.get('MCU', info_data.get('processor', 'atmega32u4')) - if mcu in CHIBIOS_PROCESSORS: + if info_data['processor'] in CHIBIOS_PROCESSORS: arm_processor_rules(info_data, rules) - elif mcu in LUFA_PROCESSORS + VUSB_PROCESSORS: + elif info_data['processor'] in LUFA_PROCESSORS + VUSB_PROCESSORS: avr_processor_rules(info_data, rules) else: - cli.log.warning("%s: Unknown MCU: %s" % (info_data['keyboard_folder'], mcu)) + cli.log.warning("%s: Unknown MCU: %s" % (info_data['keyboard_folder'], info_data['processor'])) unknown_processor_rules(info_data, rules) - _extract_community_layouts(info_data, rules) + # Pull in data from the json map + dotty_info = dotty(info_data) + info_rules_map = _json_load(Path('data/mappings/info_rules.json')) + + for rules_key, info_dict in info_rules_map.items(): + info_key = info_dict['info_key'] + key_type = info_dict.get('value_type', 'str') + + try: + if rules_key in rules and info_dict.get('to_json', True): + if dotty_info.get(info_key) and info_dict.get('warn_duplicate', True): + _log_warning(info_data, '%s in rules.mk is overwriting %s in info.json' % (rules_key, info_key)) + + if key_type.startswith('array'): + if '.' in key_type: + key_type, array_type = key_type.split('.', 1) + else: + array_type = None + + rules_value = rules[rules_key].replace('{', '').replace('}', '').strip() + + if array_type == 'int': + dotty_info[info_key] = list(map(int, rules_value.split(','))) + else: + dotty_info[info_key] = rules_value.split(',') + + elif key_type == 'list': + dotty_info[info_key] = rules[rules_key].split() + + elif key_type == 'bool': + dotty_info[info_key] = rules[rules_key] in true_values + + elif key_type == 'hex': + dotty_info[info_key] = '0x' + rules[rules_key][2:].upper() + + elif key_type == 'int': + dotty_info[info_key] = int(rules[rules_key]) + + else: + dotty_info[info_key] = rules[rules_key] + + except Exception as e: + _log_warning(info_data, f'{rules_key}->{info_key}: {e}') + + info_data.update(dotty_info) + + # Merge in config values that can't be easily mapped _extract_features(info_data, rules) - _extract_led_drivers(info_data, rules) return info_data @@ -565,23 +464,7 @@ def arm_processor_rules(info_data, rules): info_data['processor_type'] = 'arm' info_data['protocol'] = 'ChibiOS' - if 'MCU' in rules: - if 'processor' in info_data: - _log_warning(info_data, 'Processor/MCU is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['processor'] = rules['MCU'] - - elif 'processor' not in info_data: - info_data['processor'] = 'unknown' - - if 'BOOTLOADER' in rules: - # FIXME(skullydazed/anyone): need to remove the massive amounts of duplication first - # if 'bootloader' in info_data: - # _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['bootloader'] = rules['BOOTLOADER'] - - else: + if 'bootloader' not in info_data: if 'STM32' in info_data['processor']: info_data['bootloader'] = 'stm32-dfu' else: @@ -594,12 +477,6 @@ def arm_processor_rules(info_data, rules): elif 'ARM_ATSAM' in rules: info_data['platform'] = 'ARM_ATSAM' - if 'BOARD' in rules: - if 'board' in info_data: - _log_warning(info_data, 'Board is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['board'] = rules['BOARD'] - return info_data @@ -607,26 +484,10 @@ def avr_processor_rules(info_data, rules): """Setup the default info for an AVR board. """ info_data['processor_type'] = 'avr' - info_data['bootloader'] = rules['BOOTLOADER'] if 'BOOTLOADER' in rules else 'atmel-dfu' info_data['platform'] = rules['ARCH'] if 'ARCH' in rules else 'unknown' info_data['protocol'] = 'V-USB' if rules.get('MCU') in VUSB_PROCESSORS else 'LUFA' - if 'MCU' in rules: - if 'processor' in info_data: - _log_warning(info_data, 'Processor/MCU is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['processor'] = rules['MCU'] - - elif 'processor' not in info_data: - info_data['processor'] = 'unknown' - - if 'BOOTLOADER' in rules: - # FIXME(skullydazed/anyone): need to remove the massive amounts of duplication first - # if 'bootloader' in info_data: - # _log_warning(info_data, 'Bootloader is specified in both info.json and rules.mk, the rules.mk value wins.') - - info_data['bootloader'] = rules['BOOTLOADER'] - else: + if 'bootloader' not in info_data: info_data['bootloader'] = 'atmel-dfu' # FIXME(fauxpark/anyone): Eventually we should detect the protocol by looking at PROTOCOL inherited from mcu_selection.mk: diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index f889833d0b9..3efeddb85e8 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -230,3 +230,32 @@ def test_generate_rgb_breathe_table(): check_returncode(result) assert 'Breathing center: 1.2' in result.stdout assert 'Breathing max: 127' in result.stdout + + +def test_generate_config_h(): + result = check_subcommand('generate-config-h', '-kb', 'handwired/pytest/basic') + check_returncode(result) + assert '# define DEVICE_VER 0x0001' in result.stdout + assert '# define DESCRIPTION handwired/pytest/basic' in result.stdout + assert '# define DIODE_DIRECTION COL2ROW' in result.stdout + assert '# define MANUFACTURER none' in result.stdout + assert '# define PRODUCT handwired/pytest/basic' in result.stdout + assert '# define PRODUCT_ID 0x6465' in result.stdout + assert '# define VENDOR_ID 0xFEED' in result.stdout + assert '# define MATRIX_COLS 1' in result.stdout + assert '# define MATRIX_COL_PINS { F4 }' in result.stdout + assert '# define MATRIX_ROWS 1' in result.stdout + assert '# define MATRIX_ROW_PINS { F5 }' in result.stdout + + +def test_generate_rules_mk(): + result = check_subcommand('generate-rules-mk', '-kb', 'handwired/pytest/basic') + check_returncode(result) + assert 'BOOTLOADER ?= atmel-dfu' in result.stdout + assert 'MCU ?= atmega32u4' in result.stdout + + +def test_generate_layouts(): + result = check_subcommand('generate-layouts', '-kb', 'handwired/pytest/basic') + check_returncode(result) + assert '#define LAYOUT_custom(k0A) {' in result.stdout diff --git a/requirements.txt b/requirements.txt index f4d43da8d63..27a6baed997 100644 --- a/requirements.txt +++ b/requirements.txt @@ -2,6 +2,7 @@ appdirs argcomplete colorama +dotty-dict hjson jsonschema milc From db11a2a1fd7a7ff9c458e8ec9e963a61a1192bf3 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 1 Feb 2021 08:19:00 +1100 Subject: [PATCH 107/145] Decouple USB events from the USB interrupt handler. (#10437) --- tmk_core/protocol/chibios/main.c | 3 ++ tmk_core/protocol/chibios/usb_main.c | 75 ++++++++++++++++++++++++---- tmk_core/protocol/chibios/usb_main.h | 11 ++++ 3 files changed, 80 insertions(+), 9 deletions(-) diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c index e07c181fc8b..63e4c99d21a 100644 --- a/tmk_core/protocol/chibios/main.c +++ b/tmk_core/protocol/chibios/main.c @@ -163,6 +163,7 @@ int main(void) { keyboard_setup(); /* Init USB */ + usb_event_queue_init(); init_usb_driver(&USB_DRIVER); #ifdef MIDI_ENABLE @@ -221,6 +222,8 @@ int main(void) { /* Main loop */ while (true) { + usb_event_queue_task(); + #if !defined(NO_USB_STARTUP_CHECK) if (USB_DRIVER.state == USB_SUSPENDED) { print("[s]"); diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index ad489fb9166..cb7aeb23b23 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -27,6 +27,7 @@ #include #include +#include #include "usb_main.h" @@ -368,6 +369,69 @@ static usb_driver_configs_t drivers = { * --------------------------------------------------------- */ +#define USB_EVENT_QUEUE_SIZE 16 +usbevent_t event_queue[USB_EVENT_QUEUE_SIZE]; +uint8_t event_queue_head; +uint8_t event_queue_tail; + +void usb_event_queue_init(void) { + // Initialise the event queue + memset(&event_queue, 0, sizeof(event_queue)); + event_queue_head = 0; + event_queue_tail = 0; +} + +static inline bool usb_event_queue_enqueue(usbevent_t event) { + uint8_t next = (event_queue_head + 1) % USB_EVENT_QUEUE_SIZE; + if (next == event_queue_tail) { + return false; + } + event_queue[event_queue_head] = event; + event_queue_head = next; + return true; +} + +static inline bool usb_event_queue_dequeue(usbevent_t *event) { + if (event_queue_head == event_queue_tail) { + return false; + } + *event = event_queue[event_queue_tail]; + event_queue_tail = (event_queue_tail + 1) % USB_EVENT_QUEUE_SIZE; + return true; +} + +static inline void usb_event_suspend_handler(void) { +#ifdef SLEEP_LED_ENABLE + sleep_led_enable(); +#endif /* SLEEP_LED_ENABLE */ +} + +static inline void usb_event_wakeup_handler(void) { + suspend_wakeup_init(); +#ifdef SLEEP_LED_ENABLE + sleep_led_disable(); + // NOTE: converters may not accept this + led_set(host_keyboard_leds()); +#endif /* SLEEP_LED_ENABLE */ +} + +void usb_event_queue_task(void) { + usbevent_t event; + while (usb_event_queue_dequeue(&event)) { + switch (event) { + case USB_EVENT_SUSPEND: + usb_event_suspend_handler(); + break; + case USB_EVENT_WAKEUP: + usb_event_wakeup_handler(); + break; + default: + // Nothing to do, we don't handle it. + break; + } + } +} + /* Handles the USB driver global events * TODO: maybe disable some things when connection is lost? */ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { @@ -402,9 +466,7 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { osalSysUnlockFromISR(); return; case USB_EVENT_SUSPEND: -#ifdef SLEEP_LED_ENABLE - sleep_led_enable(); -#endif /* SLEEP_LED_ENABLE */ + usb_event_queue_enqueue(USB_EVENT_SUSPEND); /* Falls into.*/ case USB_EVENT_UNCONFIGURED: /* Falls into.*/ @@ -425,12 +487,7 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { qmkusbWakeupHookI(&drivers.array[i].driver); chSysUnlockFromISR(); } - suspend_wakeup_init(); -#ifdef SLEEP_LED_ENABLE - sleep_led_disable(); - // NOTE: converters may not accept this - led_set(host_keyboard_leds()); -#endif /* SLEEP_LED_ENABLE */ + usb_event_queue_enqueue(USB_EVENT_WAKEUP); return; case USB_EVENT_STALLED: diff --git a/tmk_core/protocol/chibios/usb_main.h b/tmk_core/protocol/chibios/usb_main.h index eaa08d8f795..fb33c8cd0f1 100644 --- a/tmk_core/protocol/chibios/usb_main.h +++ b/tmk_core/protocol/chibios/usb_main.h @@ -37,6 +37,17 @@ void init_usb_driver(USBDriver *usbp); /* Restart the USB driver and bus */ void restart_usb_driver(USBDriver *usbp); +/* --------------- + * USB Event queue + * --------------- + */ + +/* Initialisation of the FIFO */ +void usb_event_queue_init(void); + +/* Task to dequeue and execute any handlers for the USB events on the main thread */ +void usb_event_queue_task(void); + /* --------------- * Keyboard header * --------------- From ae4ee7553abfaa2149fcea04c3cbee20f3b8c7a5 Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Sun, 31 Jan 2021 17:25:55 -0500 Subject: [PATCH 108/145] Stop sounds when suspended (#11553) * fix stopping audio on suspend vs. startup sound * trim firmware size * fix stuck audio on startup (ARM) --- quantum/audio/audio.h | 1 + quantum/audio/audio_avr.c | 2 ++ quantum/audio/audio_chibios.c | 15 +++++++++++++-- quantum/audio/audio_pwm.c | 11 +++++++++++ quantum/quantum.c | 20 ++++++++++++++++++++ tmk_core/common/avr/suspend.c | 4 ++-- tmk_core/common/chibios/suspend.c | 7 +++++++ 7 files changed, 56 insertions(+), 4 deletions(-) diff --git a/quantum/audio/audio.h b/quantum/audio/audio.h index bc00cd19e6a..dccf03d5f65 100644 --- a/quantum/audio/audio.h +++ b/quantum/audio/audio.h @@ -83,6 +83,7 @@ void increase_tempo(uint8_t tempo_change); void decrease_tempo(uint8_t tempo_change); void audio_init(void); +void audio_startup(void); #ifdef PWM_AUDIO void play_sample(uint8_t* s, uint16_t l, bool r); diff --git a/quantum/audio/audio_avr.c b/quantum/audio/audio_avr.c index 5a96bf64393..1bac43bb437 100644 --- a/quantum/audio/audio_avr.c +++ b/quantum/audio/audio_avr.c @@ -227,7 +227,9 @@ void audio_init() { audio_initialized = true; } +} +void audio_startup() { if (audio_config.enable) { PLAY_SONG(startup_song); } diff --git a/quantum/audio/audio_chibios.c b/quantum/audio/audio_chibios.c index 1863ae140b5..dddb8f13578 100644 --- a/quantum/audio/audio_chibios.c +++ b/quantum/audio/audio_chibios.c @@ -281,6 +281,12 @@ void audio_init() { dacStart(&DACD1, &dac1cfg1); dacStart(&DACD2, &dac1cfg2); + /* + * Start the note timer + */ + gptStart(&GPTD8, &gpt8cfg1); + gptStartContinuous(&GPTD8, 2U); + /* * Starting GPT6/7 driver, it is used for triggering the DAC. */ @@ -295,10 +301,12 @@ void audio_init() { audio_initialized = true; + stop_all_notes(); +} + +void audio_startup() { if (audio_config.enable) { PLAY_SONG(startup_song); - } else { - stop_all_notes(); } } @@ -638,6 +646,9 @@ bool is_playing_notes(void) { return playing_notes; } bool is_audio_on(void) { return (audio_config.enable != 0); } void audio_toggle(void) { + if (audio_config.enable) { + stop_all_notes(); + } audio_config.enable ^= 1; eeconfig_update_audio(audio_config.raw); if (audio_config.enable) { diff --git a/quantum/audio/audio_pwm.c b/quantum/audio/audio_pwm.c index 545aef6dd7a..d93ac4bb408 100644 --- a/quantum/audio/audio_pwm.c +++ b/quantum/audio/audio_pwm.c @@ -29,6 +29,11 @@ #define CPU_PRESCALER 8 +#ifndef STARTUP_SONG +# define STARTUP_SONG SONG(STARTUP_SOUND) +#endif +float startup_song[][2] = STARTUP_SONG; + // Timer Abstractions // TIMSK3 - Timer/Counter #3 Interrupt Mask Register @@ -155,6 +160,12 @@ void audio_init() { audio_initialized = true; } +void audio_startup() { + if (audio_config.enable) { + PLAY_SONG(startup_song); + } +} + void stop_all_notes() { if (!audio_initialized) { audio_init(); diff --git a/quantum/quantum.c b/quantum/quantum.c index 22aa5283872..5e0cde8a25b 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -656,6 +656,26 @@ void matrix_init_quantum() { } void matrix_scan_quantum() { +#if defined(AUDIO_ENABLE) + // There are some tasks that need to be run a little bit + // after keyboard startup, or else they will not work correctly + // because of interaction with the USB device state, which + // may still be in flux... + // + // At the moment the only feature that needs this is the + // startup song. + static bool delayed_tasks_run = false; + static uint16_t delayed_task_timer = 0; + if (!delayed_tasks_run) { + if (!delayed_task_timer) { + delayed_task_timer = timer_read(); + } else if (timer_elapsed(delayed_task_timer) > 300) { + audio_startup(); + delayed_tasks_run = true; + } + } +#endif + #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE) matrix_scan_music(); #endif diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 86c3df040a4..9db0e0064ab 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -97,8 +97,7 @@ static void power_down(uint8_t wdto) { led_set(leds_off); # ifdef AUDIO_ENABLE - // This sometimes disables the start-up noise, so it's been disabled - // stop_all_notes(); + stop_all_notes(); # endif /* AUDIO_ENABLE */ # if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) rgblight_suspend(); @@ -157,6 +156,7 @@ __attribute__((weak)) void suspend_wakeup_init_user(void) {} * FIXME: needs doc */ __attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); } + /** \brief run immediately after wakeup * * FIXME: needs doc diff --git a/tmk_core/common/chibios/suspend.c b/tmk_core/common/chibios/suspend.c index 796056019f6..49e20641fb9 100644 --- a/tmk_core/common/chibios/suspend.c +++ b/tmk_core/common/chibios/suspend.c @@ -12,6 +12,10 @@ #include "led.h" #include "wait.h" +#ifdef AUDIO_ENABLE +# include "audio.h" +#endif /* AUDIO_ENABLE */ + #ifdef BACKLIGHT_ENABLE # include "backlight.h" #endif @@ -65,6 +69,9 @@ void suspend_power_down(void) { #if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) rgblight_suspend(); #endif +#ifdef AUDIO_ENABLE + stop_all_notes(); +#endif /* AUDIO_ENABLE */ suspend_power_down_kb(); // on AVR, this enables the watchdog for 15ms (max), and goes to From 9591e992cc03f35a1f835e25af0cec2075263067 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Feb 2021 01:12:52 -0800 Subject: [PATCH 109/145] Move transport.c to QUANTUM_LIB_SRC (#11751) --- common_features.mk | 4 ++-- .../handwired/dactyl_manuform/5x6_right_trackball/rules.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/common_features.mk b/common_features.mk index 6ed7e73b668..6365955a7f9 100644 --- a/common_features.mk +++ b/common_features.mk @@ -135,7 +135,7 @@ else # This ensures that the EEPROM page buffer fits into RAM USE_PROCESS_STACKSIZE = 0x600 USE_EXCEPTIONS_STACKSIZE = 0x300 - + SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c OPT_DEFS += -DEEPROM_EMU_STM32F042x6 @@ -483,7 +483,7 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes) # Determine which (if any) transport files are required ifneq ($(strip $(SPLIT_TRANSPORT)), custom) - QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c + QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/transport.c # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called. # Unused functions are pruned away, which is why we can add multiple drivers here without bloat. ifeq ($(PLATFORM),AVR) diff --git a/keyboards/handwired/dactyl_manuform/5x6_right_trackball/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_right_trackball/rules.mk index 19b330cdc5d..0eeb0bed04e 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_right_trackball/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_right_trackball/rules.mk @@ -26,5 +26,5 @@ POINTING_DEVICE_ENABLE = yes SPLIT_KEYBOARD = yes SPLIT_TRANSPORT = custom -SRC += pointer_transport.c pmw3360.c -QUANTUM_LIB_SRC += serial.c i2c_master.c i2c_slave.c spi_master.c +SRC += pmw3360.c +QUANTUM_LIB_SRC += serial.c i2c_master.c i2c_slave.c spi_master.c pointer_transport.c From 9a4618b05b9f1093908c2153c719c5eb5d4a79ee Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Mon, 1 Feb 2021 19:12:41 -0500 Subject: [PATCH 110/145] Address wake from sleep instability (#11450) * resolve race condition between suspend and wake in LUFA * avoid multiple calls to suspend_power_down() / suspend_wakeup_init() * Remove duplicate suspend_power_down_kb() call * pause on wakeup to wait for USB state to settle * need the repeated suspend_power_down() (that's where the sleep is) * more efficient implementation * fine tune the pause after sending wakeup * speculative chibios version of pause-after-wake * make wakeup delay configurable, and adjust value * better location for wakeup delay --- docs/config_options.md | 2 ++ tmk_core/common/avr/suspend.c | 1 - tmk_core/common/suspend.h | 4 ++++ tmk_core/protocol/chibios/usb_main.c | 11 +++++++++++ tmk_core/protocol/lufa/lufa.c | 24 ++++++++++++++++++++---- 5 files changed, 37 insertions(+), 5 deletions(-) diff --git a/docs/config_options.md b/docs/config_options.md index a3262b418b0..9a64b9b3d20 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -97,6 +97,8 @@ This is a C header file that is one of the first things included, and will persi * sets the maximum power (in mA) over USB for the device (default: 500) * `#define USB_POLLING_INTERVAL_MS 10` * sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces +* `#define USB_SUSPEND_WAKEUP_DELAY 200` + * set the number of milliseconde to pause after sending a wakeup packet * `#define F_SCL 100000L` * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`. diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 9db0e0064ab..b784a0835d1 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -102,7 +102,6 @@ static void power_down(uint8_t wdto) { # if defined(RGBLIGHT_SLEEP) && defined(RGBLIGHT_ENABLE) rgblight_suspend(); # endif - suspend_power_down_kb(); // TODO: more power saving // See PicoPower application note diff --git a/tmk_core/common/suspend.h b/tmk_core/common/suspend.h index 766df95aa1b..9d17d984eda 100644 --- a/tmk_core/common/suspend.h +++ b/tmk_core/common/suspend.h @@ -12,3 +12,7 @@ void suspend_wakeup_init_user(void); void suspend_wakeup_init_kb(void); void suspend_power_down_user(void); void suspend_power_down_kb(void); + +#ifndef USB_SUSPEND_WAKEUP_DELAY +# define USB_SUSPEND_WAKEUP_DELAY 200 +#endif diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index cb7aeb23b23..13b1e34d282 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -708,6 +708,17 @@ void init_usb_driver(USBDriver *usbp) { void restart_usb_driver(USBDriver *usbp) { usbStop(usbp); usbDisconnectBus(usbp); + +#if USB_SUSPEND_WAKEUP_DELAY > 0 + // Some hubs, kvm switches, and monitors do + // weird things, with USB device state bouncing + // around wildly on wakeup, yielding race + // conditions that can corrupt the keyboard state. + // + // Pause for a while to let things settle... + wait_ms(USB_SUSPEND_WAKEUP_DELAY); +#endif + usbStart(usbp, &usbcfg); usbConnectBus(usbp); } diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 623aa33ff5e..74e48222d0c 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -435,7 +435,9 @@ void EVENT_USB_Device_Suspend() { */ void EVENT_USB_Device_WakeUp() { print("[W]"); +#if defined(NO_USB_STARTUP_CHECK) suspend_wakeup_init(); +#endif #ifdef SLEEP_LED_ENABLE sleep_led_disable(); @@ -1073,12 +1075,26 @@ int main(void) { print("Keyboard start.\n"); while (1) { #if !defined(NO_USB_STARTUP_CHECK) - while (USB_DeviceState == DEVICE_STATE_Suspended) { + if (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); - suspend_power_down(); - if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { - USB_Device_SendRemoteWakeup(); + while (USB_DeviceState == DEVICE_STATE_Suspended) { + suspend_power_down(); + if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { + USB_Device_SendRemoteWakeup(); + clear_keyboard(); + +# if USB_SUSPEND_WAKEUP_DELAY > 0 + // Some hubs, kvm switches, and monitors do + // weird things, with USB device state bouncing + // around wildly on wakeup, yielding race + // conditions that can corrupt the keyboard state. + // + // Pause for a while to let things settle... + wait_ms(USB_SUSPEND_WAKEUP_DELAY); +# endif + } } + suspend_wakeup_init(); } #endif From 27749e1c967c02c05e62a89a0ae2776dd7e5158c Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 4 Feb 2021 14:13:47 +1100 Subject: [PATCH 111/145] Fixup lck75 line endings. --- keyboards/lck75/config.h | 186 ++++++------ keyboards/lck75/glcdfont.c | 34 +-- keyboards/lck75/info.txt | 22 +- keyboards/lck75/keymaps/default/keymap.c | 354 +++++++++++------------ keyboards/lck75/lck75.c | 32 +- keyboards/lck75/lck75.h | 116 ++++---- keyboards/lck75/readme.md | 34 +-- 7 files changed, 389 insertions(+), 389 deletions(-) diff --git a/keyboards/lck75/config.h b/keyboards/lck75/config.h index 4b5cdf5bba2..1180545991d 100644 --- a/keyboards/lck75/config.h +++ b/keyboards/lck75/config.h @@ -1,93 +1,93 @@ -/*Copyright 2019 Lyso1 - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -#define VENDOR_ID 0x7856 -#define PRODUCT_ID 0x37FJ -#define DEVICE_VER 0x0001 -#define MANUFACTURER Lyso1 -#define PRODUCT lck75 - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14*/ -#define MATRIX_ROW_PINS { C2, C3, C7, C4, C6, C5 } -#define MATRIX_COL_PINS { A0, B0, A1, B1, A2, B2, A3, B3, A4, B4, A5, A6, A7, D6, D5 } -#define UNUSED_PINS - -#define ENCODERS_PAD_B { D1 } -#define ENCODERS_PAD_A { D0 } -#define ENCODER_RESOLUTION 2 //default/suggested - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - - -/* Bootmagic Lite key configuration */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 0 - -#define RGBLIGHT_SLEEP - -#define OLED_TIMEOUT 10000 - -#define UNICODE_SELECTED_MODES UC_WINC, UC_MAC, UC_LNX - -#define UNICODE_CYCLE_PERSIST false - -/* #define AUTO_SHIFT_MODIFIERS */ -/* #define AUTO_SHIFT_TIMEOUT 170 */ -/* #define NO_AUTO_SHIFT_SPECIAL */ -/* #define NO_AUTO_SHIFT_NUMERIC */ - -#ifdef LOCKING_SUPPORT_ENABLE -# undef LOCKING_SUPPORT_ENABLE -#endif -#ifdef LOCKING_RESYNC_ENABLE -# undef LOCKING_RESYNC_ENABLE -#endif - - -#define OLED_FONT_H "keyboards/lck75/glcdfont.c" - -#define IGNORE_MOD_TAP_INTERRUPT -#define PERMISSIVE_HOLD -#define TAPPING_TERM 200 - -#define NO_ACTION_ONESHOT +/*Copyright 2019 Lyso1 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x7856 +#define PRODUCT_ID 0x37FJ +#define DEVICE_VER 0x0001 +#define MANUFACTURER Lyso1 +#define PRODUCT lck75 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14*/ +#define MATRIX_ROW_PINS { C2, C3, C7, C4, C6, C5 } +#define MATRIX_COL_PINS { A0, B0, A1, B1, A2, B2, A3, B3, A4, B4, A5, A6, A7, D6, D5 } +#define UNUSED_PINS + +#define ENCODERS_PAD_B { D1 } +#define ENCODERS_PAD_A { D0 } +#define ENCODER_RESOLUTION 2 //default/suggested + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define RGBLIGHT_SLEEP + +#define OLED_TIMEOUT 10000 + +#define UNICODE_SELECTED_MODES UC_WINC, UC_MAC, UC_LNX + +#define UNICODE_CYCLE_PERSIST false + +/* #define AUTO_SHIFT_MODIFIERS */ +/* #define AUTO_SHIFT_TIMEOUT 170 */ +/* #define NO_AUTO_SHIFT_SPECIAL */ +/* #define NO_AUTO_SHIFT_NUMERIC */ + +#ifdef LOCKING_SUPPORT_ENABLE +# undef LOCKING_SUPPORT_ENABLE +#endif +#ifdef LOCKING_RESYNC_ENABLE +# undef LOCKING_RESYNC_ENABLE +#endif + + +#define OLED_FONT_H "keyboards/lck75/glcdfont.c" + +#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD +#define TAPPING_TERM 200 + +#define NO_ACTION_ONESHOT diff --git a/keyboards/lck75/glcdfont.c b/keyboards/lck75/glcdfont.c index 9516ae26b98..ed46ad56f92 100644 --- a/keyboards/lck75/glcdfont.c +++ b/keyboards/lck75/glcdfont.c @@ -1,18 +1,18 @@ -// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. -// See gfxfont.h for newer custom bitmap font info. -// https://helixfonteditor.netlify.com/ - -#include "progmem.h" - -// Standard ASCII 5x7 font -const unsigned char font[] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, - 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, - 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, - 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, - 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x60, 0x30, 0x18, 0xF8, 0x18, 0x00, 0xC0, 0x70, 0x1C, 0x06, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0xC3, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x1C, 0x22, 0x41, 0x41, 0x41, 0x22, 0x1C, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x20, 0xF8, 0x0C, 0x04, 0xE7, 0xE4, 0xE4, 0x07, 0x04, 0xE4, 0xE7, 0xE4, 0x04, 0x07, 0xE4, 0xE4, 0xE7, 0x04, 0x0C, 0xF8, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, 0x06, 0x0C, 0x18, 0x30, 0x77, 0x77, 0x77, 0x00, 0x77, 0x77, - 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x60, 0x70, 0x3E, 0x1F, 0x19, 0x18, 0x0C, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x0C, 0x06, 0x07, 0xFC, 0x00, 0xFF, 0x01, 0x00, 0x00, 0x00, 0xFF, 0x80, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x1C, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x1C, 0x22, 0x00, 0x00, 0x1C, 0x3E, 0x7F, 0x63, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x49, 0xFF, 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x38, 0x30, 0xFF, 0xFF, 0xFF, 0x30, 0x38, 0x3F, 0x1F, 0x0F, 0x00, 0x00, 0xFF, 0x49, 0x49, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, 0x00, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x00, 0x00, 0x00, 0xF0, 0x90, 0x90, 0xF0, 0x90, 0x90, 0xF0, 0x98, 0x9C, 0xF2, 0x22, 0x21, 0xE1, 0x01, 0x01, 0x01, 0xF1, 0x91, 0x91, 0xFA, 0x4C, 0x4C, 0xF8, 0x48, 0x48, 0xF8, 0x48, 0x48, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0E, 0x18, 0x30, 0x21, 0x21, 0x31, 0x18, 0x10, 0x30, 0x20, 0x60, 0x41, 0x60, 0x20, 0x30, 0x18, 0x30, 0x60, 0x40, 0x40, 0x47, 0x4C, 0x48, 0x68, 0x38, 0x1C, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x63, 0x7F, 0x3E, 0x1C, - 0x00, 0x00, 0x22, 0x1C, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x0F, 0x18, 0x10, 0x70, 0x10, 0x10, 0x70, 0x10, 0x13, 0x73, 0x13, 0x10, 0x70, 0x10, 0x10, 0x70, 0x10, 0x18, 0x0F, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, 0x08, 0x0C, 0x7E, 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x09, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x09, 0x0F, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x07, 0x04, 0x04, 0x07, 0x04, 0x04, 0x0F, 0x09, 0x09, 0x0F, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x07, 0x02, 0x02, 0x03, 0x02, 0x02, 0x03, 0x02, 0x02, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. +// https://helixfonteditor.netlify.com/ + +#include "progmem.h" + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x60, 0x30, 0x18, 0xF8, 0x18, 0x00, 0xC0, 0x70, 0x1C, 0x06, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0xC3, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x1C, 0x22, 0x41, 0x41, 0x41, 0x22, 0x1C, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x20, 0xF8, 0x0C, 0x04, 0xE7, 0xE4, 0xE4, 0x07, 0x04, 0xE4, 0xE7, 0xE4, 0x04, 0x07, 0xE4, 0xE4, 0xE7, 0x04, 0x0C, 0xF8, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, 0x06, 0x0C, 0x18, 0x30, 0x77, 0x77, 0x77, 0x00, 0x77, 0x77, + 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x60, 0x70, 0x3E, 0x1F, 0x19, 0x18, 0x0C, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x0C, 0x06, 0x07, 0xFC, 0x00, 0xFF, 0x01, 0x00, 0x00, 0x00, 0xFF, 0x80, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x1C, 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x1C, 0x22, 0x00, 0x00, 0x1C, 0x3E, 0x7F, 0x63, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x49, 0xFF, 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x38, 0x30, 0xFF, 0xFF, 0xFF, 0x30, 0x38, 0x3F, 0x1F, 0x0F, 0x00, 0x00, 0xFF, 0x49, 0x49, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, 0x00, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, 0x00, 0x00, 0x00, 0xF0, 0x90, 0x90, 0xF0, 0x90, 0x90, 0xF0, 0x98, 0x9C, 0xF2, 0x22, 0x21, 0xE1, 0x01, 0x01, 0x01, 0xF1, 0x91, 0x91, 0xFA, 0x4C, 0x4C, 0xF8, 0x48, 0x48, 0xF8, 0x48, 0x48, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0E, 0x18, 0x30, 0x21, 0x21, 0x31, 0x18, 0x10, 0x30, 0x20, 0x60, 0x41, 0x60, 0x20, 0x30, 0x18, 0x30, 0x60, 0x40, 0x40, 0x47, 0x4C, 0x48, 0x68, 0x38, 0x1C, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x63, 0x7F, 0x3E, 0x1C, + 0x00, 0x00, 0x22, 0x1C, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x0F, 0x18, 0x10, 0x70, 0x10, 0x10, 0x70, 0x10, 0x13, 0x73, 0x13, 0x10, 0x70, 0x10, 0x10, 0x70, 0x10, 0x18, 0x0F, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, 0x08, 0x0C, 0x7E, 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x09, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x0F, 0x09, 0x09, 0x09, 0x0F, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x07, 0x04, 0x04, 0x07, 0x04, 0x04, 0x0F, 0x09, 0x09, 0x0F, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x07, 0x02, 0x02, 0x03, 0x02, 0x02, 0x03, 0x02, 0x02, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; \ No newline at end of file diff --git a/keyboards/lck75/info.txt b/keyboards/lck75/info.txt index 9471cf25235..19f37f64e6e 100644 --- a/keyboards/lck75/info.txt +++ b/keyboards/lck75/info.txt @@ -1,12 +1,12 @@ -{ - "keyboard_name": "LCK75", - "url": "https://github.com/lyso1/LCK75", - "maintainer": "Lyso1", - "width": 17, - "height": 6, - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"Mute", "x":15.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"PgDn", "x":15.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"[", "x":11.5, "y":2.25}, {"label":"]", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"PgUp", "x":15.5, "y":2.25}, {"label":"3,0", "x":0, "y":3.25, "w":1.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":";", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Del", "x":15.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"MO(1)", "x":15.5, "y":4.25}, {"label":"Up", "x":14.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5}, {"label":"Left", "x":13.25, "y":5.5}, {"label":"Down", "x":14.25, "y":5.5}, {"label":"Right", "x":15.25, "y":5.5}] - } - } +{ + "keyboard_name": "LCK75", + "url": "https://github.com/lyso1/LCK75", + "maintainer": "Lyso1", + "width": 17, + "height": 6, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"F13", "x":14, "y":0}, {"label":"Mute", "x":15.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"PgDn", "x":15.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"[", "x":11.5, "y":2.25}, {"label":"]", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"PgUp", "x":15.5, "y":2.25}, {"label":"3,0", "x":0, "y":3.25, "w":1.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":";", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Del", "x":15.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"MO(1)", "x":15.5, "y":4.25}, {"label":"Up", "x":14.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5}, {"label":"Left", "x":13.25, "y":5.5}, {"label":"Down", "x":14.25, "y":5.5}, {"label":"Right", "x":15.25, "y":5.5}] + } + } } \ No newline at end of file diff --git a/keyboards/lck75/keymaps/default/keymap.c b/keyboards/lck75/keymaps/default/keymap.c index 58cbdc95623..66958417cc9 100644 --- a/keyboards/lck75/keymaps/default/keymap.c +++ b/keyboards/lck75/keymaps/default/keymap.c @@ -1,177 +1,177 @@ -/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) - * Copyright 2020 @wafflekeebs/@waffle#6666(oled code) - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - - - -void encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } -} - -// - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_lck75_ansi( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), - - [1] = LAYOUT_lck75_ansi( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LGUI, KC_TRNS, KC_TRNS, KC_RALT, MO(1), KC_TRNS, KC_TRNS, KC_TRNS) -}; - - - - -extern uint8_t is_master; - -#define IDLE_FRAMES 5 -#define IDLE_SPEED 30 -#define TAP_FRAMES 2 -#define TAP_SPEED 40 -#define ANIM_FRAME_DURATION 200 -#define ANIM_SIZE 512 - -bool gui_on = true; -uint32_t anim_timer = 0; -uint32_t anim_sleep = 0; -uint8_t current_idle_frame = 0; -uint8_t current_tap_frame = 0; - -static void render_anim(void) { - - static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = { - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, - 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - }, - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, - 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, - 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - }, - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,64,64,64,64,32,32,32,32,16,8,4,2,2,4,24,96,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,60,194,1,1,2,2,4,4,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,96,96,0,129,130,130,132,8,16,32,64,128,0,0,0,0,128,128,128,128,64,64,64,64,32, - 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,25,6,0,0,0,0,0,0,0,24,24,24,27,3,0,64,160,34,36,20,18,18,18,11,8,8,8,8,5,5,9,9,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - }, - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, - 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, - 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - }, - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,8,4,2,2,2,4,56,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,28,226,1,1,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64,64,64, - 32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - } - - }; - - static const char PROGMEM prep[][ANIM_SIZE] = { - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64, - 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,195,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - } - - }; - - static const char PROGMEM tap[TAP_FRAMES][ANIM_SIZE] = { - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,248,248,248,248,0,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,1,2,4,8,16,32,67,135,7,1,0,184,188,190,159, - 95,95,79,76,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,67,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,61,124,252,252,252,252,252,60,12,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1, - 1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - }, - - { - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64,64,64,32, - 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,0,0,0,1,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,122,122,121,121,121,121,57,49,2,2,4,4,8,8,8,136,136,135,128, - 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - } - - }; - - void animation_phase(void) { - - if (get_current_wpm() <=IDLE_SPEED) { - current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; - oled_write_raw_P(idle[abs((IDLE_FRAMES-1)-current_idle_frame)], ANIM_SIZE); - } - - if (get_current_wpm() >IDLE_SPEED && get_current_wpm() =TAP_SPEED) { - current_tap_frame = (current_tap_frame + 1) % TAP_FRAMES; - oled_write_raw_P(tap[abs((TAP_FRAMES-1)-current_tap_frame)], ANIM_SIZE); - } - } - - if (get_current_wpm() > 0) { - - oled_on(); - - if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { - anim_timer = timer_read32(); - animation_phase(); - } - - anim_sleep = timer_read32(); - } else { - if (timer_elapsed32(anim_sleep) > OLED_TIMEOUT) { - oled_off(); - } else { - if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { - anim_timer = timer_read32(); - animation_phase(); - } - } - } -} -#ifdef OLED_DRIVER_ENABLE -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; -} - -__attribute__((weak)) void oled_task_user(void) { - render_anim(); -} -#endif +/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) + * Copyright 2020 @wafflekeebs/@waffle#6666(oled code) + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} + +// + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_lck75_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + + [1] = LAYOUT_lck75_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LGUI, KC_TRNS, KC_TRNS, KC_RALT, MO(1), KC_TRNS, KC_TRNS, KC_TRNS) +}; + + + + +extern uint8_t is_master; + +#define IDLE_FRAMES 5 +#define IDLE_SPEED 30 +#define TAP_FRAMES 2 +#define TAP_SPEED 40 +#define ANIM_FRAME_DURATION 200 +#define ANIM_SIZE 512 + +bool gui_on = true; +uint32_t anim_timer = 0; +uint32_t anim_sleep = 0; +uint8_t current_idle_frame = 0; +uint8_t current_tap_frame = 0; + +static void render_anim(void) { + + static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,16,8,8,4,4,4,8,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,24,100,130,2,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,192,56,4,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,64,64,64,64,32,32,32,32,16,8,4,2,2,4,24,96,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,60,194,1,1,2,2,4,4,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,96,96,0,129,130,130,132,8,16,32,64,128,0,0,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,25,6,0,0,0,0,0,0,0,24,24,24,27,3,0,64,160,34,36,20,18,18,18,11,8,8,8,8,5,5,9,9,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8, + 7,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,8,4,2,2,2,4,56,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,28,226,1,1,2,2,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,192,193,193,194,4,8,16,32,64,128,0,0,0,128,128,128,128,64,64,64,64, + 32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,12,12,12,13,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,2,2,4,4,8,8,8,8,8,7,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + static const char PROGMEM prep[][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64, + 64,64,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,195,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1,1,1,1,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + static const char PROGMEM tap[TAP_FRAMES][ANIM_SIZE] = { + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,248,248,248,248,0,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,129,128,128,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,1,2,4,8,16,32,67,135,7,1,0,184,188,190,159, + 95,95,79,76,32,32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,24,6,5,152,153,132,67,124,65,65,64,64,32,33,34,18,17,17,17,9,8,8,8,8,4,4,8,8,16,16,16,16,16,17,15,1,61,124,252,252,252,252,252,60,12,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,2,2,1,1,1, + 1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + }, + + { + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,0,0,0,0,0,128,64,64,32,32,32,32,16,16,16,16,8,4,2,1,1,2,12,48,64,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,30,225,0,0,1,1,2,2,1,0,0,0,0,128,128,0,0,0,0,0,0,0,0,0,128,0,48,48,0,0,1,225,26,6,9,49,53,1,138,124,0,0,128,128,128,128,64,64,64,64,32, + 32,32,32,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,112,12,3,0,0,0,0,0,0,0,0,0,0,1,1,0,64,160,33,34,18,17,17,17,9,8,8,8,8,4,4,4,4,4,4,2,2,2,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,128,128,128,128,64,64,64,64,64,32,32,32,32,32,16,16,16,16,16,8,8,8,8,8,4,4,4,4,4,2,3,122,122,121,121,121,121,57,49,2,2,4,4,8,8,8,136,136,135,128, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 + } + + }; + + void animation_phase(void) { + + if (get_current_wpm() <=IDLE_SPEED) { + current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; + oled_write_raw_P(idle[abs((IDLE_FRAMES-1)-current_idle_frame)], ANIM_SIZE); + } + + if (get_current_wpm() >IDLE_SPEED && get_current_wpm() =TAP_SPEED) { + current_tap_frame = (current_tap_frame + 1) % TAP_FRAMES; + oled_write_raw_P(tap[abs((TAP_FRAMES-1)-current_tap_frame)], ANIM_SIZE); + } + } + + if (get_current_wpm() > 0) { + + oled_on(); + + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + + anim_sleep = timer_read32(); + } else { + if (timer_elapsed32(anim_sleep) > OLED_TIMEOUT) { + oled_off(); + } else { + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + } + } +} +#ifdef OLED_DRIVER_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +__attribute__((weak)) void oled_task_user(void) { + render_anim(); +} +#endif diff --git a/keyboards/lck75/lck75.c b/keyboards/lck75/lck75.c index 7c610a75c78..5851232e65b 100644 --- a/keyboards/lck75/lck75.c +++ b/keyboards/lck75/lck75.c @@ -1,17 +1,17 @@ -/* Copyright 2020 Lyso1 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - +/* Copyright 2020 Lyso1 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "lck75.h" \ No newline at end of file diff --git a/keyboards/lck75/lck75.h b/keyboards/lck75/lck75.h index 920e7c30af4..08eb8c4b114 100644 --- a/keyboards/lck75/lck75.h +++ b/keyboards/lck75/lck75.h @@ -1,58 +1,58 @@ -/* Copyright 2020 Lyso1 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -//#define BONGO ENABLE - -#pragma once - - - -#define _x_ KC_NO - -#include "quantum.h" - -#define LAYOUT_lck75_ansi(\ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ - K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ - K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, K3E }, \ - { K40, _x_, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ - { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, K5B, K5C, K5D, K5E} \ -} - -#define LAYOUT_lck75_7u( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ - K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ - K50, K52, K56, K5A, K5B, K5C, K5D, K5E \ -) \ -{ \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, K3E }, \ - { K40, _x_, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ - { K50, _x_, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, K5B, K5C, K5D, K5E } \ -} +/* Copyright 2020 Lyso1 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +//#define BONGO ENABLE + +#pragma once + + + +#define _x_ KC_NO + +#include "quantum.h" + +#define LAYOUT_lck75_ansi(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, K3E }, \ + { K40, _x_, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, K5B, K5C, K5D, K5E} \ +} + +#define LAYOUT_lck75_7u( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K52, K56, K5A, K5B, K5C, K5D, K5E \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, _x_, K3D, K3E }, \ + { K40, _x_, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, _x_, K52, _x_, _x_, _x_, K56, _x_, _x_, _x_, K5A, K5B, K5C, K5D, K5E } \ +} diff --git a/keyboards/lck75/readme.md b/keyboards/lck75/readme.md index dd8f5322f47..2ded56ebd2e 100644 --- a/keyboards/lck75/readme.md +++ b/keyboards/lck75/readme.md @@ -1,17 +1,17 @@ -# lck75 - -A 75% keyboard that can be assembled with only through hole components, including usb type-c - -* Keyboard Maintainer: [Lyso1](https://github.com/lyso1) -* Hardware Supported: LCK75, atmega32 -* Hardware Availability: [GitHub](https://github.com/lyso1) - -Make example for this keyboard (after setting up your build environment): - - make lck75:default - -Flashing example for this keyboard: - - make lck75:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +# lck75 + +A 75% keyboard that can be assembled with only through hole components, including usb type-c + +* Keyboard Maintainer: [Lyso1](https://github.com/lyso1) +* Hardware Supported: LCK75, atmega32 +* Hardware Availability: [GitHub](https://github.com/lyso1) + +Make example for this keyboard (after setting up your build environment): + + make lck75:default + +Flashing example for this keyboard: + + make lck75:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From c1b2e87e894c08b5d6bdd85b9e47c885fd447370 Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 6 Feb 2021 09:35:10 +1100 Subject: [PATCH 112/145] Remove `MIDI_ENABLE_STRICT` from user keymaps (#11750) --- keyboards/clueboard/66/keymaps/magicmonty/config.h | 3 --- keyboards/contra/keymaps/alper/config.h | 3 --- keyboards/contra/keymaps/deastiny/config.h | 3 --- keyboards/contra/keymaps/msiu/config.h | 3 --- keyboards/contra/keymaps/ryanm101/config.h | 3 --- keyboards/converter/usb_usb/keymaps/narze/config.h | 3 --- keyboards/keebio/levinson/keymaps/xtonhasvim/config.h | 3 --- keyboards/niu_mini/keymaps/framtava/config.h | 3 --- keyboards/niu_mini/keymaps/planck/config.h | 3 --- keyboards/niu_mini/keymaps/tobias/config.h | 3 --- keyboards/niu_mini/keymaps/xtonhasvim/config.h | 3 --- keyboards/planck/keymaps/abishalom/config.h | 3 --- keyboards/planck/keymaps/am/config.h | 3 --- keyboards/planck/keymaps/andylikescandy/config.h | 3 --- keyboards/planck/keymaps/atreus/config.h | 3 --- keyboards/planck/keymaps/aviator/config.h | 3 --- keyboards/planck/keymaps/brandon/config.h | 3 --- keyboards/planck/keymaps/charlesrocket/config.h | 3 --- keyboards/planck/keymaps/circuit/config.h | 3 --- keyboards/planck/keymaps/coloneljesus/config.h | 3 --- keyboards/planck/keymaps/corvec/config.h | 3 --- keyboards/planck/keymaps/dbroqua/config.h | 3 --- keyboards/planck/keymaps/dcompact/config.h | 3 --- keyboards/planck/keymaps/deft/config.h | 3 --- keyboards/planck/keymaps/dlaroe/config.h | 3 --- keyboards/planck/keymaps/dr0ck/config.h | 3 --- keyboards/planck/keymaps/dr_notsokind/config.h | 3 --- keyboards/planck/keymaps/dudeofawesome/config.h | 3 --- keyboards/planck/keymaps/emiller/config.h | 3 --- keyboards/planck/keymaps/emilyh/config.h | 3 --- keyboards/planck/keymaps/eosti/config.h | 3 --- keyboards/planck/keymaps/eshesh2/config.h | 3 --- keyboards/planck/keymaps/experimental/config.h | 3 --- keyboards/planck/keymaps/fabian/config.h | 3 --- keyboards/planck/keymaps/fsck/config.h | 3 --- keyboards/planck/keymaps/gitdrik/config.h | 3 --- keyboards/planck/keymaps/grahampheath/config.h | 3 --- keyboards/planck/keymaps/gunp/config.h | 3 --- keyboards/planck/keymaps/hvp/config.h | 3 --- keyboards/planck/keymaps/impossible/config.h | 3 --- keyboards/planck/keymaps/jeebak/config.h | 3 --- keyboards/planck/keymaps/jetpacktuxedo/config.h | 3 --- keyboards/planck/keymaps/jhenahan/config.h | 3 --- keyboards/planck/keymaps/jirgn/config.h | 3 --- keyboards/planck/keymaps/kelorean/config.h | 3 --- keyboards/planck/keymaps/khord/config.h | 3 --- keyboards/planck/keymaps/kifinnsson/config.h | 3 --- keyboards/planck/keymaps/kloki/config.h | 3 --- keyboards/planck/keymaps/kmontag42/config.h | 3 --- keyboards/planck/keymaps/mattly/config.h | 3 --- keyboards/planck/keymaps/mgalisa/config.h | 3 --- keyboards/planck/keymaps/mikethetiger/config.h | 3 --- keyboards/planck/keymaps/mjt/config.h | 3 --- keyboards/planck/keymaps/mjtnumsym/config.h | 3 --- keyboards/planck/keymaps/motform/config.h | 3 --- keyboards/planck/keymaps/msiu/config.h | 3 --- keyboards/planck/keymaps/muzfuz/config.h | 3 --- keyboards/planck/keymaps/mwpeterson/config.h | 3 --- keyboards/planck/keymaps/myoung34/config.h | 3 --- keyboards/planck/keymaps/narze/config.h | 3 --- keyboards/planck/keymaps/navi/config.h | 3 --- keyboards/planck/keymaps/paget/config.h | 3 --- keyboards/planck/keymaps/palleiko/config.h | 3 --- keyboards/planck/keymaps/pascamel/config.h | 3 --- keyboards/planck/keymaps/pevecyan/config.h | 3 --- keyboards/planck/keymaps/phreed/config.h | 3 --- keyboards/planck/keymaps/pickle_jr/config.h | 3 --- keyboards/planck/keymaps/pok3r/config.h | 3 --- keyboards/planck/keymaps/premek/config.h | 3 --- keyboards/planck/keymaps/ptillemans/config.h | 3 --- keyboards/planck/keymaps/pvc/config.h | 3 --- keyboards/planck/keymaps/raffle/config.h | 3 --- keyboards/planck/keymaps/rjhilgefort/config.h | 3 --- keyboards/planck/keymaps/sean/config.h | 3 --- keyboards/planck/keymaps/sgoodwin/config.h | 3 --- keyboards/planck/keymaps/sigul/config.h | 3 --- keyboards/planck/keymaps/skug/config.h | 3 --- keyboards/planck/keymaps/smt/config.h | 3 --- keyboards/planck/keymaps/snowkuma/config.h | 3 --- keyboards/planck/keymaps/steno/config.h | 3 --- keyboards/planck/keymaps/tehwalris/config.h | 3 --- keyboards/planck/keymaps/tom/config.h | 3 --- keyboards/planck/keymaps/unagi/config.h | 3 --- keyboards/planck/keymaps/unicode/config.h | 3 --- keyboards/planck/keymaps/vaire/config.h | 3 --- keyboards/planck/keymaps/vifon/config.h | 3 --- keyboards/planck/keymaps/winternebs/config.h | 3 --- keyboards/planck/keymaps/zach/config.h | 3 --- keyboards/planck/keymaps/zrichard/config.h | 3 --- keyboards/preonic/keymaps/AlexDaigre/config.h | 3 --- keyboards/preonic/keymaps/CMD-Preonic/config.h | 3 --- keyboards/preonic/keymaps/blake-newman/config.h | 3 --- keyboards/preonic/keymaps/boy314/config.h | 3 --- keyboards/preonic/keymaps/choromanski/config.h | 3 --- keyboards/preonic/keymaps/cranium/config.h | 3 --- keyboards/preonic/keymaps/dlaroe/config.h | 3 --- keyboards/preonic/keymaps/drasbeck/config.h | 3 --- keyboards/preonic/keymaps/dudeofawesome/config.h | 3 --- keyboards/preonic/keymaps/egstad/config.h | 3 --- keyboards/preonic/keymaps/ekis_isa/config.h | 3 --- keyboards/preonic/keymaps/elisiano/config.h | 3 --- keyboards/preonic/keymaps/fig-r/config.h | 3 --- keyboards/preonic/keymaps/fsck/config.h | 3 --- keyboards/preonic/keymaps/keelhauler/config.h | 3 --- keyboards/preonic/keymaps/kjwon15/config.h | 3 --- keyboards/preonic/keymaps/kuatsure/config.h | 3 --- keyboards/preonic/keymaps/laurentlaurent/config.h | 3 --- keyboards/preonic/keymaps/mguterl/config.h | 3 --- keyboards/preonic/keymaps/mikethetiger/config.h | 3 --- keyboards/preonic/keymaps/muzfuz/config.h | 3 --- keyboards/preonic/keymaps/mverteuil/config.h | 3 --- keyboards/preonic/keymaps/mverteuil_2x2u/config.h | 3 --- keyboards/preonic/keymaps/nikchi/config.h | 3 --- keyboards/preonic/keymaps/pcurt854/config.h | 3 --- keyboards/preonic/keymaps/pezhore/config.h | 3 --- keyboards/preonic/keymaps/pitty/config.h | 3 --- keyboards/preonic/keymaps/pvillano/config.h | 3 --- keyboards/preonic/keymaps/senseored/config.h | 3 --- keyboards/preonic/keymaps/shwilliam/config.h | 3 --- keyboards/preonic/keymaps/smt/config.h | 3 --- keyboards/sentraq/s60_x/keymaps/bluebear/config.h | 3 --- layouts/community/ortho_4x12/bocaj/config.h | 3 --- layouts/community/ortho_4x12/brandonschlack/config.h | 3 --- layouts/community/ortho_4x12/drashna/config.h | 3 --- layouts/community/ortho_4x12/jackhumbert/config.h | 3 --- layouts/community/ortho_4x12/juno/config.h | 3 --- layouts/community/ortho_4x12/junonum/config.h | 3 --- layouts/community/ortho_4x12/mguterl/config.h | 3 --- layouts/community/ortho_5x12/brandonschlack/config.h | 3 --- users/ishtob/config.h | 3 --- 130 files changed, 390 deletions(-) diff --git a/keyboards/clueboard/66/keymaps/magicmonty/config.h b/keyboards/clueboard/66/keymaps/magicmonty/config.h index 65853f6b0c1..c38aee5ee6d 100644 --- a/keyboards/clueboard/66/keymaps/magicmonty/config.h +++ b/keyboards/clueboard/66/keymaps/magicmonty/config.h @@ -4,9 +4,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on #define MIDI_BASIC diff --git a/keyboards/contra/keymaps/alper/config.h b/keyboards/contra/keymaps/alper/config.h index d61ee2938e9..6114392f63e 100644 --- a/keyboards/contra/keymaps/alper/config.h +++ b/keyboards/contra/keymaps/alper/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/contra/keymaps/deastiny/config.h b/keyboards/contra/keymaps/deastiny/config.h index 8757eb70d45..6166fea4a77 100644 --- a/keyboards/contra/keymaps/deastiny/config.h +++ b/keyboards/contra/keymaps/deastiny/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/contra/keymaps/msiu/config.h b/keyboards/contra/keymaps/msiu/config.h index 8757eb70d45..6166fea4a77 100644 --- a/keyboards/contra/keymaps/msiu/config.h +++ b/keyboards/contra/keymaps/msiu/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/contra/keymaps/ryanm101/config.h b/keyboards/contra/keymaps/ryanm101/config.h index 224a4a37d09..e3d8b6b6b58 100644 --- a/keyboards/contra/keymaps/ryanm101/config.h +++ b/keyboards/contra/keymaps/ryanm101/config.h @@ -21,9 +21,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/converter/usb_usb/keymaps/narze/config.h b/keyboards/converter/usb_usb/keymaps/narze/config.h index cbdb7d94e35..9ab1637306a 100644 --- a/keyboards/converter/usb_usb/keymaps/narze/config.h +++ b/keyboards/converter/usb_usb/keymaps/narze/config.h @@ -4,9 +4,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/keebio/levinson/keymaps/xtonhasvim/config.h b/keyboards/keebio/levinson/keymaps/xtonhasvim/config.h index bcd2220ce08..aaf1b7f049b 100644 --- a/keyboards/keebio/levinson/keymaps/xtonhasvim/config.h +++ b/keyboards/keebio/levinson/keymaps/xtonhasvim/config.h @@ -8,9 +8,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/niu_mini/keymaps/framtava/config.h b/keyboards/niu_mini/keymaps/framtava/config.h index 26387986dd2..0c42bb50602 100644 --- a/keyboards/niu_mini/keymaps/framtava/config.h +++ b/keyboards/niu_mini/keymaps/framtava/config.h @@ -9,9 +9,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/niu_mini/keymaps/planck/config.h b/keyboards/niu_mini/keymaps/planck/config.h index 26387986dd2..0c42bb50602 100644 --- a/keyboards/niu_mini/keymaps/planck/config.h +++ b/keyboards/niu_mini/keymaps/planck/config.h @@ -9,9 +9,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/niu_mini/keymaps/tobias/config.h b/keyboards/niu_mini/keymaps/tobias/config.h index f88b52d1fce..ad72b6b6c53 100644 --- a/keyboards/niu_mini/keymaps/tobias/config.h +++ b/keyboards/niu_mini/keymaps/tobias/config.h @@ -8,9 +8,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/niu_mini/keymaps/xtonhasvim/config.h b/keyboards/niu_mini/keymaps/xtonhasvim/config.h index aa13d7b7358..c79bb54ad2c 100644 --- a/keyboards/niu_mini/keymaps/xtonhasvim/config.h +++ b/keyboards/niu_mini/keymaps/xtonhasvim/config.h @@ -9,9 +9,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/abishalom/config.h b/keyboards/planck/keymaps/abishalom/config.h index 672c5d570f0..fbdc426d04a 100644 --- a/keyboards/planck/keymaps/abishalom/config.h +++ b/keyboards/planck/keymaps/abishalom/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/am/config.h b/keyboards/planck/keymaps/am/config.h index 1ae457e3b8b..fa27834f983 100644 --- a/keyboards/planck/keymaps/am/config.h +++ b/keyboards/planck/keymaps/am/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/andylikescandy/config.h b/keyboards/planck/keymaps/andylikescandy/config.h index 01169db2aa4..356a5d29ad4 100644 --- a/keyboards/planck/keymaps/andylikescandy/config.h +++ b/keyboards/planck/keymaps/andylikescandy/config.h @@ -21,9 +21,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/atreus/config.h b/keyboards/planck/keymaps/atreus/config.h index c83a0279dac..39daa2ec30c 100644 --- a/keyboards/planck/keymaps/atreus/config.h +++ b/keyboards/planck/keymaps/atreus/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/aviator/config.h b/keyboards/planck/keymaps/aviator/config.h index 5bd98a74b79..b2b3104501a 100644 --- a/keyboards/planck/keymaps/aviator/config.h +++ b/keyboards/planck/keymaps/aviator/config.h @@ -24,9 +24,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/brandon/config.h b/keyboards/planck/keymaps/brandon/config.h index 29a07dc637c..c2244d8bc86 100644 --- a/keyboards/planck/keymaps/brandon/config.h +++ b/keyboards/planck/keymaps/brandon/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/charlesrocket/config.h b/keyboards/planck/keymaps/charlesrocket/config.h index 21d65d8f5dc..070635a38d5 100644 --- a/keyboards/planck/keymaps/charlesrocket/config.h +++ b/keyboards/planck/keymaps/charlesrocket/config.h @@ -8,9 +8,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/circuit/config.h b/keyboards/planck/keymaps/circuit/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/circuit/config.h +++ b/keyboards/planck/keymaps/circuit/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/coloneljesus/config.h b/keyboards/planck/keymaps/coloneljesus/config.h index a1635f2bab5..cd03b846e42 100644 --- a/keyboards/planck/keymaps/coloneljesus/config.h +++ b/keyboards/planck/keymaps/coloneljesus/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/corvec/config.h b/keyboards/planck/keymaps/corvec/config.h index a7f4506062f..99aba8093e2 100644 --- a/keyboards/planck/keymaps/corvec/config.h +++ b/keyboards/planck/keymaps/corvec/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dbroqua/config.h b/keyboards/planck/keymaps/dbroqua/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/dbroqua/config.h +++ b/keyboards/planck/keymaps/dbroqua/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dcompact/config.h b/keyboards/planck/keymaps/dcompact/config.h index 625cf903e54..2c207edc7c9 100644 --- a/keyboards/planck/keymaps/dcompact/config.h +++ b/keyboards/planck/keymaps/dcompact/config.h @@ -18,9 +18,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/deft/config.h b/keyboards/planck/keymaps/deft/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/deft/config.h +++ b/keyboards/planck/keymaps/deft/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dlaroe/config.h b/keyboards/planck/keymaps/dlaroe/config.h index 11d51c81877..86cd56d1cca 100644 --- a/keyboards/planck/keymaps/dlaroe/config.h +++ b/keyboards/planck/keymaps/dlaroe/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dr0ck/config.h b/keyboards/planck/keymaps/dr0ck/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/dr0ck/config.h +++ b/keyboards/planck/keymaps/dr0ck/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dr_notsokind/config.h b/keyboards/planck/keymaps/dr_notsokind/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/dr_notsokind/config.h +++ b/keyboards/planck/keymaps/dr_notsokind/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/dudeofawesome/config.h b/keyboards/planck/keymaps/dudeofawesome/config.h index 33dd4e41a1e..0029c262625 100644 --- a/keyboards/planck/keymaps/dudeofawesome/config.h +++ b/keyboards/planck/keymaps/dudeofawesome/config.h @@ -21,9 +21,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/emiller/config.h b/keyboards/planck/keymaps/emiller/config.h index 5fdfe80b392..18fb275105a 100644 --- a/keyboards/planck/keymaps/emiller/config.h +++ b/keyboards/planck/keymaps/emiller/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/emilyh/config.h b/keyboards/planck/keymaps/emilyh/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/emilyh/config.h +++ b/keyboards/planck/keymaps/emilyh/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/eosti/config.h b/keyboards/planck/keymaps/eosti/config.h index 54813bf06f6..d5915a78ad9 100644 --- a/keyboards/planck/keymaps/eosti/config.h +++ b/keyboards/planck/keymaps/eosti/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/eshesh2/config.h b/keyboards/planck/keymaps/eshesh2/config.h index 585511f915a..60c979b8a15 100644 --- a/keyboards/planck/keymaps/eshesh2/config.h +++ b/keyboards/planck/keymaps/eshesh2/config.h @@ -28,9 +28,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 86cc4760bb6..038dc6a8f20 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/fabian/config.h b/keyboards/planck/keymaps/fabian/config.h index e8c13caac59..d21e85693a4 100644 --- a/keyboards/planck/keymaps/fabian/config.h +++ b/keyboards/planck/keymaps/fabian/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/fsck/config.h b/keyboards/planck/keymaps/fsck/config.h index bf25da3a6fc..d68bc86cad3 100644 --- a/keyboards/planck/keymaps/fsck/config.h +++ b/keyboards/planck/keymaps/fsck/config.h @@ -18,9 +18,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/gitdrik/config.h b/keyboards/planck/keymaps/gitdrik/config.h index 0acf06dc549..7ee14c73bed 100644 --- a/keyboards/planck/keymaps/gitdrik/config.h +++ b/keyboards/planck/keymaps/gitdrik/config.h @@ -32,9 +32,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/grahampheath/config.h b/keyboards/planck/keymaps/grahampheath/config.h index db24d273a4d..11e395dd936 100644 --- a/keyboards/planck/keymaps/grahampheath/config.h +++ b/keyboards/planck/keymaps/grahampheath/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/gunp/config.h b/keyboards/planck/keymaps/gunp/config.h index 4f99c7eb81d..d3db1ffac1a 100644 --- a/keyboards/planck/keymaps/gunp/config.h +++ b/keyboards/planck/keymaps/gunp/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/hvp/config.h b/keyboards/planck/keymaps/hvp/config.h index 472afc64885..009a8f7122c 100644 --- a/keyboards/planck/keymaps/hvp/config.h +++ b/keyboards/planck/keymaps/hvp/config.h @@ -15,9 +15,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/impossible/config.h b/keyboards/planck/keymaps/impossible/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/impossible/config.h +++ b/keyboards/planck/keymaps/impossible/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/jeebak/config.h b/keyboards/planck/keymaps/jeebak/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/jeebak/config.h +++ b/keyboards/planck/keymaps/jeebak/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/jetpacktuxedo/config.h b/keyboards/planck/keymaps/jetpacktuxedo/config.h index 7efe97a5737..c3c4a682cf8 100644 --- a/keyboards/planck/keymaps/jetpacktuxedo/config.h +++ b/keyboards/planck/keymaps/jetpacktuxedo/config.h @@ -9,9 +9,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/jhenahan/config.h b/keyboards/planck/keymaps/jhenahan/config.h index 4dbcdd639e4..67c09548fcf 100644 --- a/keyboards/planck/keymaps/jhenahan/config.h +++ b/keyboards/planck/keymaps/jhenahan/config.h @@ -11,9 +11,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/jirgn/config.h b/keyboards/planck/keymaps/jirgn/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/jirgn/config.h +++ b/keyboards/planck/keymaps/jirgn/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/kelorean/config.h b/keyboards/planck/keymaps/kelorean/config.h index 036fa1a28c9..1421597aec2 100644 --- a/keyboards/planck/keymaps/kelorean/config.h +++ b/keyboards/planck/keymaps/kelorean/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/khord/config.h b/keyboards/planck/keymaps/khord/config.h index 955f6a1136d..055d741c62b 100644 --- a/keyboards/planck/keymaps/khord/config.h +++ b/keyboards/planck/keymaps/khord/config.h @@ -23,9 +23,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/kifinnsson/config.h b/keyboards/planck/keymaps/kifinnsson/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/kifinnsson/config.h +++ b/keyboards/planck/keymaps/kifinnsson/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/kloki/config.h b/keyboards/planck/keymaps/kloki/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/kloki/config.h +++ b/keyboards/planck/keymaps/kloki/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/kmontag42/config.h b/keyboards/planck/keymaps/kmontag42/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/kmontag42/config.h +++ b/keyboards/planck/keymaps/kmontag42/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mattly/config.h b/keyboards/planck/keymaps/mattly/config.h index 52e39ec7f42..46fe9734172 100644 --- a/keyboards/planck/keymaps/mattly/config.h +++ b/keyboards/planck/keymaps/mattly/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mgalisa/config.h b/keyboards/planck/keymaps/mgalisa/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/mgalisa/config.h +++ b/keyboards/planck/keymaps/mgalisa/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mikethetiger/config.h b/keyboards/planck/keymaps/mikethetiger/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/mikethetiger/config.h +++ b/keyboards/planck/keymaps/mikethetiger/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mjt/config.h b/keyboards/planck/keymaps/mjt/config.h index 4072c5d7f26..f6362935e96 100644 --- a/keyboards/planck/keymaps/mjt/config.h +++ b/keyboards/planck/keymaps/mjt/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mjtnumsym/config.h b/keyboards/planck/keymaps/mjtnumsym/config.h index 4072c5d7f26..f6362935e96 100644 --- a/keyboards/planck/keymaps/mjtnumsym/config.h +++ b/keyboards/planck/keymaps/mjtnumsym/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/motform/config.h b/keyboards/planck/keymaps/motform/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/motform/config.h +++ b/keyboards/planck/keymaps/motform/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/msiu/config.h b/keyboards/planck/keymaps/msiu/config.h index 40e399a6759..86550ac5c0c 100644 --- a/keyboards/planck/keymaps/msiu/config.h +++ b/keyboards/planck/keymaps/msiu/config.h @@ -15,9 +15,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/muzfuz/config.h b/keyboards/planck/keymaps/muzfuz/config.h index fe44b5aa2b9..89b3042486b 100644 --- a/keyboards/planck/keymaps/muzfuz/config.h +++ b/keyboards/planck/keymaps/muzfuz/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/mwpeterson/config.h b/keyboards/planck/keymaps/mwpeterson/config.h index d66557b29dd..2665bd7c56d 100644 --- a/keyboards/planck/keymaps/mwpeterson/config.h +++ b/keyboards/planck/keymaps/mwpeterson/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/myoung34/config.h b/keyboards/planck/keymaps/myoung34/config.h index d855da86834..341c814faa8 100644 --- a/keyboards/planck/keymaps/myoung34/config.h +++ b/keyboards/planck/keymaps/myoung34/config.h @@ -22,9 +22,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/narze/config.h b/keyboards/planck/keymaps/narze/config.h index cbdb7d94e35..9ab1637306a 100644 --- a/keyboards/planck/keymaps/narze/config.h +++ b/keyboards/planck/keymaps/narze/config.h @@ -4,9 +4,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/navi/config.h b/keyboards/planck/keymaps/navi/config.h index 087ebb54e79..df9d67680c8 100644 --- a/keyboards/planck/keymaps/navi/config.h +++ b/keyboards/planck/keymaps/navi/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/paget/config.h b/keyboards/planck/keymaps/paget/config.h index b406e2fed97..59bf4aa2a3e 100755 --- a/keyboards/planck/keymaps/paget/config.h +++ b/keyboards/planck/keymaps/paget/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/palleiko/config.h b/keyboards/planck/keymaps/palleiko/config.h index a1635f2bab5..cd03b846e42 100644 --- a/keyboards/planck/keymaps/palleiko/config.h +++ b/keyboards/planck/keymaps/palleiko/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/pascamel/config.h b/keyboards/planck/keymaps/pascamel/config.h index 679d106ca0b..fcf90b41320 100644 --- a/keyboards/planck/keymaps/pascamel/config.h +++ b/keyboards/planck/keymaps/pascamel/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/pevecyan/config.h b/keyboards/planck/keymaps/pevecyan/config.h index e8c13caac59..d21e85693a4 100644 --- a/keyboards/planck/keymaps/pevecyan/config.h +++ b/keyboards/planck/keymaps/pevecyan/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/phreed/config.h b/keyboards/planck/keymaps/phreed/config.h index b406e2fed97..59bf4aa2a3e 100644 --- a/keyboards/planck/keymaps/phreed/config.h +++ b/keyboards/planck/keymaps/phreed/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/pickle_jr/config.h b/keyboards/planck/keymaps/pickle_jr/config.h index 52e736088a5..526ebe8e87f 100644 --- a/keyboards/planck/keymaps/pickle_jr/config.h +++ b/keyboards/planck/keymaps/pickle_jr/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/pok3r/config.h b/keyboards/planck/keymaps/pok3r/config.h index 003fd259c59..1c42f854eae 100644 --- a/keyboards/planck/keymaps/pok3r/config.h +++ b/keyboards/planck/keymaps/pok3r/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/premek/config.h b/keyboards/planck/keymaps/premek/config.h index 37be38c9056..6a7e5f734c1 100644 --- a/keyboards/planck/keymaps/premek/config.h +++ b/keyboards/planck/keymaps/premek/config.h @@ -8,9 +8,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/ptillemans/config.h b/keyboards/planck/keymaps/ptillemans/config.h index d9be4c017e4..c88a9c01497 100644 --- a/keyboards/planck/keymaps/ptillemans/config.h +++ b/keyboards/planck/keymaps/ptillemans/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/pvc/config.h b/keyboards/planck/keymaps/pvc/config.h index 11204358bd7..fc7211fe6af 100644 --- a/keyboards/planck/keymaps/pvc/config.h +++ b/keyboards/planck/keymaps/pvc/config.h @@ -35,9 +35,6 @@ along with this program. If not, see . * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/raffle/config.h b/keyboards/planck/keymaps/raffle/config.h index e8c13caac59..d21e85693a4 100644 --- a/keyboards/planck/keymaps/raffle/config.h +++ b/keyboards/planck/keymaps/raffle/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/rjhilgefort/config.h b/keyboards/planck/keymaps/rjhilgefort/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/rjhilgefort/config.h +++ b/keyboards/planck/keymaps/rjhilgefort/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/sean/config.h b/keyboards/planck/keymaps/sean/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/sean/config.h +++ b/keyboards/planck/keymaps/sean/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/sgoodwin/config.h b/keyboards/planck/keymaps/sgoodwin/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/sgoodwin/config.h +++ b/keyboards/planck/keymaps/sgoodwin/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/sigul/config.h b/keyboards/planck/keymaps/sigul/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/sigul/config.h +++ b/keyboards/planck/keymaps/sigul/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/skug/config.h b/keyboards/planck/keymaps/skug/config.h index 79f77786ade..b82385f2685 100644 --- a/keyboards/planck/keymaps/skug/config.h +++ b/keyboards/planck/keymaps/skug/config.h @@ -20,9 +20,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/smt/config.h b/keyboards/planck/keymaps/smt/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/smt/config.h +++ b/keyboards/planck/keymaps/smt/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/snowkuma/config.h b/keyboards/planck/keymaps/snowkuma/config.h index b41ead838dd..694245582d1 100644 --- a/keyboards/planck/keymaps/snowkuma/config.h +++ b/keyboards/planck/keymaps/snowkuma/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/steno/config.h b/keyboards/planck/keymaps/steno/config.h index 4f99c7eb81d..d3db1ffac1a 100644 --- a/keyboards/planck/keymaps/steno/config.h +++ b/keyboards/planck/keymaps/steno/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/tehwalris/config.h b/keyboards/planck/keymaps/tehwalris/config.h index c5d55b96938..8bcacb05f37 100644 --- a/keyboards/planck/keymaps/tehwalris/config.h +++ b/keyboards/planck/keymaps/tehwalris/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/tom/config.h b/keyboards/planck/keymaps/tom/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/keyboards/planck/keymaps/tom/config.h +++ b/keyboards/planck/keymaps/tom/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/unagi/config.h b/keyboards/planck/keymaps/unagi/config.h index 9cd2f4a53f4..9b4fb883235 100644 --- a/keyboards/planck/keymaps/unagi/config.h +++ b/keyboards/planck/keymaps/unagi/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/unicode/config.h b/keyboards/planck/keymaps/unicode/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/planck/keymaps/unicode/config.h +++ b/keyboards/planck/keymaps/unicode/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/vaire/config.h b/keyboards/planck/keymaps/vaire/config.h index 96a13cc427d..b247df78599 100644 --- a/keyboards/planck/keymaps/vaire/config.h +++ b/keyboards/planck/keymaps/vaire/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/vifon/config.h b/keyboards/planck/keymaps/vifon/config.h index be395faad3e..41cc7245385 100644 --- a/keyboards/planck/keymaps/vifon/config.h +++ b/keyboards/planck/keymaps/vifon/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/winternebs/config.h b/keyboards/planck/keymaps/winternebs/config.h index eec8a93762d..4e75e7a6ed4 100755 --- a/keyboards/planck/keymaps/winternebs/config.h +++ b/keyboards/planck/keymaps/winternebs/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/zach/config.h b/keyboards/planck/keymaps/zach/config.h index 35b28da2369..c959cb06b50 100644 --- a/keyboards/planck/keymaps/zach/config.h +++ b/keyboards/planck/keymaps/zach/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/planck/keymaps/zrichard/config.h b/keyboards/planck/keymaps/zrichard/config.h index 216801c8553..fb7ebb98850 100755 --- a/keyboards/planck/keymaps/zrichard/config.h +++ b/keyboards/planck/keymaps/zrichard/config.h @@ -32,9 +32,6 @@ along with this program. If not, see . #define UNUSED_PINS #endif -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/AlexDaigre/config.h b/keyboards/preonic/keymaps/AlexDaigre/config.h index 40a9524b469..37858350a84 100644 --- a/keyboards/preonic/keymaps/AlexDaigre/config.h +++ b/keyboards/preonic/keymaps/AlexDaigre/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/CMD-Preonic/config.h b/keyboards/preonic/keymaps/CMD-Preonic/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/preonic/keymaps/CMD-Preonic/config.h +++ b/keyboards/preonic/keymaps/CMD-Preonic/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/blake-newman/config.h b/keyboards/preonic/keymaps/blake-newman/config.h index 20535125826..c714aac7e8b 100644 --- a/keyboards/preonic/keymaps/blake-newman/config.h +++ b/keyboards/preonic/keymaps/blake-newman/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/boy314/config.h b/keyboards/preonic/keymaps/boy314/config.h index b18b95477b9..29d911d188b 100644 --- a/keyboards/preonic/keymaps/boy314/config.h +++ b/keyboards/preonic/keymaps/boy314/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/choromanski/config.h b/keyboards/preonic/keymaps/choromanski/config.h index 600cbea5c20..163afaed931 100644 --- a/keyboards/preonic/keymaps/choromanski/config.h +++ b/keyboards/preonic/keymaps/choromanski/config.h @@ -24,9 +24,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/cranium/config.h b/keyboards/preonic/keymaps/cranium/config.h index 6d73958adf8..5975764d7ec 100644 --- a/keyboards/preonic/keymaps/cranium/config.h +++ b/keyboards/preonic/keymaps/cranium/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/dlaroe/config.h b/keyboards/preonic/keymaps/dlaroe/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/preonic/keymaps/dlaroe/config.h +++ b/keyboards/preonic/keymaps/dlaroe/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/drasbeck/config.h b/keyboards/preonic/keymaps/drasbeck/config.h index 042096f1646..f84356478df 100644 --- a/keyboards/preonic/keymaps/drasbeck/config.h +++ b/keyboards/preonic/keymaps/drasbeck/config.h @@ -28,9 +28,6 @@ Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) 2020 Max Drasbeck * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/dudeofawesome/config.h b/keyboards/preonic/keymaps/dudeofawesome/config.h index 48bd13ba451..354e9c6021e 100644 --- a/keyboards/preonic/keymaps/dudeofawesome/config.h +++ b/keyboards/preonic/keymaps/dudeofawesome/config.h @@ -23,9 +23,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/egstad/config.h b/keyboards/preonic/keymaps/egstad/config.h index e66743f4585..2a3cab826a6 100644 --- a/keyboards/preonic/keymaps/egstad/config.h +++ b/keyboards/preonic/keymaps/egstad/config.h @@ -69,9 +69,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/ekis_isa/config.h b/keyboards/preonic/keymaps/ekis_isa/config.h index 20535125826..c714aac7e8b 100644 --- a/keyboards/preonic/keymaps/ekis_isa/config.h +++ b/keyboards/preonic/keymaps/ekis_isa/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/elisiano/config.h b/keyboards/preonic/keymaps/elisiano/config.h index 40a9524b469..37858350a84 100644 --- a/keyboards/preonic/keymaps/elisiano/config.h +++ b/keyboards/preonic/keymaps/elisiano/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/fig-r/config.h b/keyboards/preonic/keymaps/fig-r/config.h index dc3a7ba261b..d5a11381ffb 100644 --- a/keyboards/preonic/keymaps/fig-r/config.h +++ b/keyboards/preonic/keymaps/fig-r/config.h @@ -19,9 +19,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/fsck/config.h b/keyboards/preonic/keymaps/fsck/config.h index b06980c5b0d..2051a850cf2 100644 --- a/keyboards/preonic/keymaps/fsck/config.h +++ b/keyboards/preonic/keymaps/fsck/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/keelhauler/config.h b/keyboards/preonic/keymaps/keelhauler/config.h index 40a9524b469..37858350a84 100644 --- a/keyboards/preonic/keymaps/keelhauler/config.h +++ b/keyboards/preonic/keymaps/keelhauler/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/kjwon15/config.h b/keyboards/preonic/keymaps/kjwon15/config.h index af7b8bc28a5..71b9f9ba5db 100644 --- a/keyboards/preonic/keymaps/kjwon15/config.h +++ b/keyboards/preonic/keymaps/kjwon15/config.h @@ -45,9 +45,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/kuatsure/config.h b/keyboards/preonic/keymaps/kuatsure/config.h index ba0ed525e03..5ce0e405ac5 100644 --- a/keyboards/preonic/keymaps/kuatsure/config.h +++ b/keyboards/preonic/keymaps/kuatsure/config.h @@ -20,9 +20,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/laurentlaurent/config.h b/keyboards/preonic/keymaps/laurentlaurent/config.h index 36944e9c686..2c1b1a70597 100644 --- a/keyboards/preonic/keymaps/laurentlaurent/config.h +++ b/keyboards/preonic/keymaps/laurentlaurent/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/mguterl/config.h b/keyboards/preonic/keymaps/mguterl/config.h index 40a9524b469..37858350a84 100644 --- a/keyboards/preonic/keymaps/mguterl/config.h +++ b/keyboards/preonic/keymaps/mguterl/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/mikethetiger/config.h b/keyboards/preonic/keymaps/mikethetiger/config.h index 1640f168298..1548d6c5dc1 100644 --- a/keyboards/preonic/keymaps/mikethetiger/config.h +++ b/keyboards/preonic/keymaps/mikethetiger/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/muzfuz/config.h b/keyboards/preonic/keymaps/muzfuz/config.h index 40a9524b469..37858350a84 100644 --- a/keyboards/preonic/keymaps/muzfuz/config.h +++ b/keyboards/preonic/keymaps/muzfuz/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/mverteuil/config.h b/keyboards/preonic/keymaps/mverteuil/config.h index 51b278f6478..1c7bae01832 100644 --- a/keyboards/preonic/keymaps/mverteuil/config.h +++ b/keyboards/preonic/keymaps/mverteuil/config.h @@ -18,9 +18,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/mverteuil_2x2u/config.h b/keyboards/preonic/keymaps/mverteuil_2x2u/config.h index 51b278f6478..1c7bae01832 100644 --- a/keyboards/preonic/keymaps/mverteuil_2x2u/config.h +++ b/keyboards/preonic/keymaps/mverteuil_2x2u/config.h @@ -18,9 +18,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/nikchi/config.h b/keyboards/preonic/keymaps/nikchi/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/preonic/keymaps/nikchi/config.h +++ b/keyboards/preonic/keymaps/nikchi/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/pcurt854/config.h b/keyboards/preonic/keymaps/pcurt854/config.h index 8ac0b84d4f5..eeeb89c8bfd 100644 --- a/keyboards/preonic/keymaps/pcurt854/config.h +++ b/keyboards/preonic/keymaps/pcurt854/config.h @@ -53,9 +53,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/pezhore/config.h b/keyboards/preonic/keymaps/pezhore/config.h index 8b541544b13..727d58c3d09 100644 --- a/keyboards/preonic/keymaps/pezhore/config.h +++ b/keyboards/preonic/keymaps/pezhore/config.h @@ -32,9 +32,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/pitty/config.h b/keyboards/preonic/keymaps/pitty/config.h index f87dd8f3052..789d59b919b 100644 --- a/keyboards/preonic/keymaps/pitty/config.h +++ b/keyboards/preonic/keymaps/pitty/config.h @@ -17,9 +17,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/pvillano/config.h b/keyboards/preonic/keymaps/pvillano/config.h index a338a1da440..6e86e51d330 100644 --- a/keyboards/preonic/keymaps/pvillano/config.h +++ b/keyboards/preonic/keymaps/pvillano/config.h @@ -11,9 +11,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/senseored/config.h b/keyboards/preonic/keymaps/senseored/config.h index 61f3488c669..9e6dc11513b 100644 --- a/keyboards/preonic/keymaps/senseored/config.h +++ b/keyboards/preonic/keymaps/senseored/config.h @@ -16,9 +16,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/preonic/keymaps/shwilliam/config.h b/keyboards/preonic/keymaps/shwilliam/config.h index 959f94fe2b4..5e008982588 100644 --- a/keyboards/preonic/keymaps/shwilliam/config.h +++ b/keyboards/preonic/keymaps/shwilliam/config.h @@ -7,9 +7,6 @@ #define MUSIC_MASK (keycode != KC_NO) -/* prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - #define MIDI_BASIC /* enable advanced MIDI features */ diff --git a/keyboards/preonic/keymaps/smt/config.h b/keyboards/preonic/keymaps/smt/config.h index 4c61581993c..2bebf48a1ca 100644 --- a/keyboards/preonic/keymaps/smt/config.h +++ b/keyboards/preonic/keymaps/smt/config.h @@ -7,9 +7,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h index 0a6ce8178e9..8037a0d1e7a 100644 --- a/keyboards/sentraq/s60_x/keymaps/bluebear/config.h +++ b/keyboards/sentraq/s60_x/keymaps/bluebear/config.h @@ -78,9 +78,6 @@ along with this program. If not, see . * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/bocaj/config.h b/layouts/community/ortho_4x12/bocaj/config.h index 2f5b7319842..9a65684f35a 100644 --- a/layouts/community/ortho_4x12/bocaj/config.h +++ b/layouts/community/ortho_4x12/bocaj/config.h @@ -41,9 +41,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/brandonschlack/config.h b/layouts/community/ortho_4x12/brandonschlack/config.h index 9b6789c1c9f..7828f057ab9 100644 --- a/layouts/community/ortho_4x12/brandonschlack/config.h +++ b/layouts/community/ortho_4x12/brandonschlack/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index 4a1d1babe29..f4abd64f57a 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -87,9 +87,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/jackhumbert/config.h b/layouts/community/ortho_4x12/jackhumbert/config.h index ea554c05379..4cc8382fbc1 100644 --- a/layouts/community/ortho_4x12/jackhumbert/config.h +++ b/layouts/community/ortho_4x12/jackhumbert/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/juno/config.h b/layouts/community/ortho_4x12/juno/config.h index eae636c57e8..81fc217278a 100644 --- a/layouts/community/ortho_4x12/juno/config.h +++ b/layouts/community/ortho_4x12/juno/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/junonum/config.h b/layouts/community/ortho_4x12/junonum/config.h index 23ef0e122a0..4b4d010a6a2 100644 --- a/layouts/community/ortho_4x12/junonum/config.h +++ b/layouts/community/ortho_4x12/junonum/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_4x12/mguterl/config.h b/layouts/community/ortho_4x12/mguterl/config.h index 6fa31cc8a76..9020d2b9f88 100644 --- a/layouts/community/ortho_4x12/mguterl/config.h +++ b/layouts/community/ortho_4x12/mguterl/config.h @@ -14,9 +14,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/layouts/community/ortho_5x12/brandonschlack/config.h b/layouts/community/ortho_5x12/brandonschlack/config.h index 9968297363d..5704ca12f76 100644 --- a/layouts/community/ortho_5x12/brandonschlack/config.h +++ b/layouts/community/ortho_5x12/brandonschlack/config.h @@ -30,9 +30,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ diff --git a/users/ishtob/config.h b/users/ishtob/config.h index 1f567f4a5b8..6c07d2f2fd7 100755 --- a/users/ishtob/config.h +++ b/users/ishtob/config.h @@ -50,9 +50,6 @@ * MIDI options */ -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ From 620a946d01477b64ee2f719141aa35400c0188c6 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sat, 6 Feb 2021 11:27:46 +1100 Subject: [PATCH 113/145] Add STM32G431 and STM32G474 board definitions. (#11793) * Add STM32G431 and STM32G474 board definitions. * Add docs. --- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 4 + docs/ja/compatible_microcontrollers.md | 4 + lib/python/qmk/constants.py | 2 +- .../GENERIC_STM32_G431XB/board/board.mk | 9 + .../GENERIC_STM32_G431XB/configs/config.h | 23 ++ .../GENERIC_STM32_G431XB/configs/mcuconf.h | 307 +++++++++++++++ .../GENERIC_STM32_G474XE/board/board.mk | 9 + .../GENERIC_STM32_G474XE/configs/config.h | 30 ++ .../GENERIC_STM32_G474XE/configs/mcuconf.h | 372 ++++++++++++++++++ quantum/mcu_selection.mk | 66 ++++ 11 files changed, 826 insertions(+), 2 deletions(-) create mode 100644 platforms/chibios/GENERIC_STM32_G431XB/board/board.mk create mode 100644 platforms/chibios/GENERIC_STM32_G431XB/configs/config.h create mode 100644 platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h create mode 100644 platforms/chibios/GENERIC_STM32_G474XE/board/board.mk create mode 100644 platforms/chibios/GENERIC_STM32_G474XE/configs/config.h create mode 100644 platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 8f1c0a91578..967b5f9904a 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index c1287bc33d4..47a4844e7fc 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -26,6 +26,10 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F0x2](https://www.st.com/en/microcontrollers-microprocessors/stm32f0x2.html) * [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) + * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) + * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) + * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) + * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) ### NXP (Kinetis) diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md index 31d362d0928..fdd11f14fa1 100644 --- a/docs/ja/compatible_microcontrollers.md +++ b/docs/ja/compatible_microcontrollers.md @@ -31,6 +31,10 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま * [STM32F0x2](https://www.st.com/en/microcontrollers-microprocessors/stm32f0x2.html) * [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) +* [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) +* [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) +* [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) +* [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) ### NXP (Kinetis) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 8a177eb6b51..3ed69f3bf95 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -10,7 +10,7 @@ QMK_FIRMWARE = Path.cwd() MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32G431', 'STM32G474' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/platforms/chibios/GENERIC_STM32_G431XB/board/board.mk b/platforms/chibios/GENERIC_STM32_G431XB/board/board.mk new file mode 100644 index 00000000000..0acbcd83c73 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G431XB/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_G431XB/configs/config.h b/platforms/chibios/GENERIC_STM32_G431XB/configs/config.h new file mode 100644 index 00000000000..39ce627e771 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G431XB/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2018-2020 Nick Brassel (@tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here (page 175): + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h new file mode 100644 index 00000000000..182d4885d7d --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h @@ -0,0 +1,307 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32G4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32G4xx_MCUCONF +#define STM32G431_MCUCONF +#define STM32G441_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) +#define STM32_PWR_CR3 (PWR_CR3_EIWF) +#define STM32_PWR_CR4 (0U) +#define STM32_HSI16_ENABLED TRUE +#define STM32_HSI48_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLLRCLK +#define STM32_PLLSRC STM32_PLLSRC_HSI16 +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 80 +#define STM32_PLLPDIV_VALUE 0 +#define STM32_PLLP_VALUE 7 +#define STM32_PLLQ_VALUE 8 +#define STM32_PLLR_VALUE 2 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK + +/* + * Peripherals clock sources. + */ +#define STM32_USART1SEL STM32_USART1SEL_SYSCLK +#define STM32_USART2SEL STM32_USART2SEL_SYSCLK +#define STM32_USART3SEL STM32_USART3SEL_SYSCLK +#define STM32_UART4SEL STM32_UART4SEL_SYSCLK +#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1 +#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1 +#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1 +#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1 +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK +#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK +#define STM32_FDCANSEL STM32_FDCANSEL_PCLK1 +#define STM32_CLK48SEL STM32_CLK48SEL_HSI48 +#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK +#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI164041_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI212229_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 + +#define STM32_IRQ_FDCAN1_PRIORITY 10 + +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4 +#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_FDCAN1 FALSE + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_USE_DAC3_CH1 FALSE +#define STM32_DAC_USE_DAC3_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE + +/* + * RTC driver system settings. + */ + +/* + * SDC driver system settings. + */ + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_LPUART1 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 FALSE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 5 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 6 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/GENERIC_STM32_G474XE/board/board.mk b/platforms/chibios/GENERIC_STM32_G474XE/board/board.mk new file mode 100644 index 00000000000..957adf509b3 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G474XE/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_G474XE/configs/config.h b/platforms/chibios/GENERIC_STM32_G474XE/configs/config.h new file mode 100644 index 00000000000..eb74d68e85d --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G474XE/configs/config.h @@ -0,0 +1,30 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef STM32_BOOTLOADER_DUAL_BANK +# define STM32_BOOTLOADER_DUAL_BANK FALSE +#endif + +// To Enter bootloader from `RESET` keycode, you'll need to dedicate a GPIO to +// charge an RC network on the BOOT0 pin. +// See the QMK Discord's #hardware channel pins for an example circuit. +// Insert these two lines into your keyboard's `config.h` file. +// In the case below, PB7 is selected to charge. +#if 0 +#define STM32_BOOTLOADER_DUAL_BANK TRUE +#define STM32_BOOTLOADER_DUAL_BANK_GPIO B7 +#endif \ No newline at end of file diff --git a/platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h new file mode 100644 index 00000000000..117e920e3b3 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h @@ -0,0 +1,372 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32G4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32G4xx_MCUCONF +#define STM32G473_MCUCONF +#define STM32G483_MCUCONF +#define STM32G474_MCUCONF +#define STM32G484_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) +#define STM32_PWR_CR3 (PWR_CR3_EIWF) +#define STM32_PWR_CR4 (0U) +#define STM32_HSI16_ENABLED TRUE +#define STM32_HSI48_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSI_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLLRCLK +#define STM32_PLLSRC STM32_PLLSRC_HSI16 +#define STM32_PLLM_VALUE 2 +#define STM32_PLLN_VALUE 40 +#define STM32_PLLPDIV_VALUE 0 +#define STM32_PLLP_VALUE 7 +#define STM32_PLLQ_VALUE 2 +#define STM32_PLLR_VALUE 2 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK + +/* + * Peripherals clock sources. + */ +#define STM32_USART1SEL STM32_USART1SEL_SYSCLK +#define STM32_USART2SEL STM32_USART2SEL_SYSCLK +#define STM32_USART3SEL STM32_USART3SEL_SYSCLK +#define STM32_UART4SEL STM32_UART4SEL_SYSCLK +#define STM32_UART5SEL STM32_UART5SEL_SYSCLK +#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1 +#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1 +#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1 +#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1 +#define STM32_I2C4SEL STM32_I2C4SEL_PCLK1 +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK +#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK +#define STM32_FDCANSEL STM32_FDCANSEL_HSE +#define STM32_CLK48SEL STM32_CLK48SEL_HSI48 +#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK +#define STM32_ADC345SEL STM32_ADC345SEL_PLLPCLK +#define STM32_QSPISEL STM32_QSPISEL_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI164041_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI212229_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 + +#define STM32_IRQ_FDCAN1_PRIORITY 10 +#define STM32_IRQ_FDCAN2_PRIORITY 10 +#define STM32_IRQ_FDCAN3_PRIORITY 10 + +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 +#define STM32_IRQ_TIM20_UP_PRIORITY 7 +#define STM32_IRQ_TIM20_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4 +#define STM32_ADC_ADC345_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4 +#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2 +#define STM32_ADC_ADC345_PRESC ADC_CCR_PRESC_DIV2 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_FDCAN1 FALSE +#define STM32_CAN_USE_FDCAN2 FALSE +#define STM32_CAN_USE_FDCAN3 FALSE + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_USE_DAC2_CH1 FALSE +#define STM32_DAC_USE_DAC3_CH1 FALSE +#define STM32_DAC_USE_DAC3_CH2 FALSE +#define STM32_DAC_USE_DAC4_CH1 FALSE +#define STM32_DAC_USE_DAC4_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC4_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC4_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC2_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC4_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC4_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC2_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC4_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC4_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_USE_I2C4 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C4_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_I2C4_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_USE_TIM16 FALSE +#define STM32_ICU_USE_TIM17 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE +#define STM32_PWM_USE_TIM20 FALSE + +/* + * RTC driver system settings. + */ + +/* + * SDC driver system settings. + */ + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_LPUART1 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 FALSE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 5 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 5 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +/* + * WSPI driver system settings. + */ +#define STM32_WSPI_USE_QUADSPI1 FALSE +#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) + +#endif /* MCUCONF_H */ diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 09e07a37fd1..81c467c656c 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -279,6 +279,72 @@ ifneq ($(findstring STM32F411, $(MCU)),) DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 endif +ifneq ($(findstring STM32G431, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32G431xB + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G431XB + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + +ifneq ($(findstring STM32G474, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32G474xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G474XE + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) PROTOCOL = LUFA From f5a38b95c12d100ab74acfd603502c66e0d0911d Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 6 Feb 2021 16:56:13 +0000 Subject: [PATCH 114/145] Remove legacy print backward compatiblitly (#11805) * Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes --- keyboards/40percentclub/ut47/matrix.c | 4 ++-- keyboards/ai03/orbit/matrix.c | 2 +- keyboards/amj96/matrix.c | 4 ++-- keyboards/angel64/alpha/matrix.c | 2 +- keyboards/angel64/rev1/matrix.c | 2 +- keyboards/bpiphany/pegasushoof/2013/matrix.c | 4 ++-- keyboards/bpiphany/pegasushoof/2015/matrix.c | 4 ++-- keyboards/centromere/matrix.c | 2 +- keyboards/chimera_ergo/matrix.c | 2 +- keyboards/chimera_ls/matrix.c | 2 +- keyboards/chimera_ortho/matrix.c | 2 +- keyboards/chimera_ortho_plus/matrix.c | 2 +- keyboards/comet46/matrix.c | 2 +- keyboards/converter/adb_usb/matrix.c | 6 +++--- keyboards/converter/hp_46010a/matrix.c | 2 +- keyboards/converter/ibm_5291/matrix.c | 2 +- keyboards/converter/m0110_usb/matrix.c | 2 +- keyboards/converter/palm_usb/matrix.c | 4 ++-- keyboards/converter/sun_usb/matrix.c | 4 ++-- keyboards/converter/xt_usb/matrix.c | 2 +- keyboards/crkbd/rev1/legacy/matrix.c | 4 ++-- keyboards/dc01/arrow/matrix.c | 2 +- keyboards/dc01/left/matrix.c | 2 +- keyboards/dc01/numpad/matrix.c | 2 +- keyboards/dc01/right/matrix.c | 2 +- keyboards/dichotomy/matrix.c | 2 +- keyboards/dm9records/ergoinu/matrix.c | 4 ++-- keyboards/ergodone/matrix.c | 4 ++-- keyboards/ergotaco/matrix.c | 4 ++-- keyboards/georgi/matrix.c | 4 ++-- keyboards/gergo/matrix.c | 4 ++-- keyboards/handwired/dactyl/matrix.c | 4 ++-- keyboards/handwired/datahand/matrix.c | 2 +- keyboards/handwired/frenchdev/matrix.c | 4 ++-- keyboards/handwired/not_so_minidox/matrix.c | 4 ++-- keyboards/handwired/owlet60/matrix.c | 2 +- keyboards/handwired/promethium/matrix.c | 2 +- keyboards/handwired/pterodactyl/matrix.c | 4 ++-- keyboards/helix/pico/matrix.c | 4 ++-- keyboards/helix/rev1/matrix.c | 4 ++-- keyboards/helix/rev2/matrix.c | 4 ++-- keyboards/hid_liber/matrix.c | 4 ++-- keyboards/honeycomb/matrix.c | 2 +- keyboards/hotdox/matrix.c | 4 ++-- keyboards/keyboardio/model01/matrix.c | 4 ++-- keyboards/kinesis/alvicstep/matrix.c | 4 ++-- keyboards/kmac/matrix.c | 2 +- keyboards/kmini/matrix.c | 2 +- keyboards/lily58/rev1/matrix.c | 4 ++-- keyboards/meira/matrix.c | 4 ++-- keyboards/mitosis/matrix.c | 2 +- keyboards/moon/matrix.c | 2 +- keyboards/mschwingen/modelm/matrix.c | 2 +- keyboards/nek_type_a/matrix.c | 2 +- keyboards/redox_w/matrix.c | 2 +- keyboards/redscarf_iiplus/verb/matrix.c | 2 +- keyboards/redscarf_iiplus/verc/matrix.c | 2 +- keyboards/redscarf_iiplus/verd/matrix.c | 2 +- keyboards/sirius/uni660/rev1/matrix.c | 2 +- keyboards/sirius/uni660/rev2/matrix.c | 2 +- keyboards/sx60/matrix.c | 2 +- keyboards/telophase/matrix.c | 2 +- keyboards/thedogkeyboard/matrix.c | 2 +- keyboards/ymdk/sp64/matrix.c | 4 ++-- keyboards/yosino58/rev1/matrix.c | 4 ++-- quantum/matrix_common.c | 2 +- tmk_core/common/command.c | 12 ++++++------ tmk_core/common/mousekey.c | 2 +- tmk_core/common/print.h | 10 ---------- tmk_core/protocol/m0110.c | 8 ++++---- tmk_core/protocol/ps2_mouse.c | 2 +- 71 files changed, 107 insertions(+), 117 deletions(-) diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c index 921bc9ed5e7..e47c7f8e136 100644 --- a/keyboards/40percentclub/ut47/matrix.c +++ b/keyboards/40percentclub/ut47/matrix.c @@ -126,8 +126,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c index a1509666cd5..b8e3296686d 100644 --- a/keyboards/ai03/orbit/matrix.c +++ b/keyboards/ai03/orbit/matrix.c @@ -96,7 +96,7 @@ void matrix_print(void) { print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c index 5d00ea98f5a..8e7bbaa7912 100644 --- a/keyboards/amj96/matrix.c +++ b/keyboards/amj96/matrix.c @@ -130,8 +130,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/angel64/alpha/matrix.c b/keyboards/angel64/alpha/matrix.c index e06fc15dc4f..474fbec030c 100644 --- a/keyboards/angel64/alpha/matrix.c +++ b/keyboards/angel64/alpha/matrix.c @@ -120,7 +120,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/angel64/rev1/matrix.c b/keyboards/angel64/rev1/matrix.c index e06fc15dc4f..474fbec030c 100644 --- a/keyboards/angel64/rev1/matrix.c +++ b/keyboards/angel64/rev1/matrix.c @@ -120,7 +120,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/bpiphany/pegasushoof/2013/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c index a670d538238..037f323c009 100644 --- a/keyboards/bpiphany/pegasushoof/2013/matrix.c +++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c @@ -133,8 +133,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/bpiphany/pegasushoof/2015/matrix.c b/keyboards/bpiphany/pegasushoof/2015/matrix.c index db039935445..42c5da3bc53 100644 --- a/keyboards/bpiphany/pegasushoof/2015/matrix.c +++ b/keyboards/bpiphany/pegasushoof/2015/matrix.c @@ -93,8 +93,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < matrix_rows(); row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c index 5ca083b4350..7256cd5cb5a 100644 --- a/keyboards/centromere/matrix.c +++ b/keyboards/centromere/matrix.c @@ -137,7 +137,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c index 112b9a40d17..577176c466c 100644 --- a/keyboards/chimera_ergo/matrix.c +++ b/keyboards/chimera_ergo/matrix.c @@ -148,7 +148,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c index 7208d971e12..9edd91818ff 100644 --- a/keyboards/chimera_ls/matrix.c +++ b/keyboards/chimera_ls/matrix.c @@ -152,7 +152,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c index eb2f18473ef..34930af7e20 100644 --- a/keyboards/chimera_ortho/matrix.c +++ b/keyboards/chimera_ortho/matrix.c @@ -138,7 +138,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c index 2bdc97991cf..818e05ac987 100644 --- a/keyboards/chimera_ortho_plus/matrix.c +++ b/keyboards/chimera_ortho_plus/matrix.c @@ -138,7 +138,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c index eb2f18473ef..34930af7e20 100644 --- a/keyboards/comet46/matrix.c +++ b/keyboards/comet46/matrix.c @@ -138,7 +138,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/converter/adb_usb/matrix.c b/keyboards/converter/adb_usb/matrix.c index 4a70eb50213..9e5399de5d6 100644 --- a/keyboards/converter/adb_usb/matrix.c +++ b/keyboards/converter/adb_usb/matrix.c @@ -129,8 +129,8 @@ void adb_mouse_task(void) if (debug_mouse) { print("adb_host_mouse_recv: "); print_bin16(codes); print("\n"); print("adb_mouse raw: ["); - phex(mouseacc); print(" "); - phex(mouse_report.buttons); print("|"); + print_hex8(mouseacc); print(" "); + print_hex8(mouse_report.buttons); print("|"); print_decs(mouse_report.x); print(" "); print_decs(mouse_report.y); print("]\n"); } @@ -173,7 +173,7 @@ uint8_t matrix_scan(void) key1 = codes&0xFF; if (debug_matrix && codes) { - print("adb_host_kbd_recv: "); phex16(codes); print("\n"); + print("adb_host_kbd_recv: "); print_hex16(codes); print("\n"); } if (codes == 0) { // no keys diff --git a/keyboards/converter/hp_46010a/matrix.c b/keyboards/converter/hp_46010a/matrix.c index 72a098746c6..03fcb2424f0 100644 --- a/keyboards/converter/hp_46010a/matrix.c +++ b/keyboards/converter/hp_46010a/matrix.c @@ -220,7 +220,7 @@ void matrix_print(void) print("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_bin_reverse8(matrix_get_row(row)); print("\n"); } diff --git a/keyboards/converter/ibm_5291/matrix.c b/keyboards/converter/ibm_5291/matrix.c index 8b2dba7ab6f..3946d02e518 100644 --- a/keyboards/converter/ibm_5291/matrix.c +++ b/keyboards/converter/ibm_5291/matrix.c @@ -277,7 +277,7 @@ void matrix_print(void) { print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/converter/m0110_usb/matrix.c b/keyboards/converter/m0110_usb/matrix.c index 098f9de0ff9..daba7a138aa 100644 --- a/keyboards/converter/m0110_usb/matrix.c +++ b/keyboards/converter/m0110_usb/matrix.c @@ -93,7 +93,7 @@ uint8_t matrix_scan(void) } if (debug_enable) { - print("["); phex(key); print("]\n"); + print("["); print_hex8(key); print("]\n"); } matrix_scan_quantum(); diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c index 590b5eea32f..289284b6167 100644 --- a/keyboards/converter/palm_usb/matrix.c +++ b/keyboards/converter/palm_usb/matrix.c @@ -381,8 +381,8 @@ void matrix_print(void) { print("\nr/c 01234567\n"); for (uint8_t row = 0; row < matrix_rows(); row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse8(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/converter/sun_usb/matrix.c b/keyboards/converter/sun_usb/matrix.c index c379e8237c9..21f45111ece 100644 --- a/keyboards/converter/sun_usb/matrix.c +++ b/keyboards/converter/sun_usb/matrix.c @@ -181,8 +181,8 @@ void matrix_print(void) { print("\nr/c 01234567\n"); for (uint8_t row = 0; row < matrix_rows(); row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse8(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/converter/xt_usb/matrix.c b/keyboards/converter/xt_usb/matrix.c index d48f1a887f5..d75f077ce9c 100644 --- a/keyboards/converter/xt_usb/matrix.c +++ b/keyboards/converter/xt_usb/matrix.c @@ -233,7 +233,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/crkbd/rev1/legacy/matrix.c b/keyboards/crkbd/rev1/legacy/matrix.c index 8eb028137bd..371b1913e15 100644 --- a/keyboards/crkbd/rev1/legacy/matrix.c +++ b/keyboards/crkbd/rev1/legacy/matrix.c @@ -350,8 +350,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index 1823138c39d..80fbbb1b04b 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -238,7 +238,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index 0e7b591f82c..41ecb8e1789 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -278,7 +278,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index f8b725adc28..1eba58cc7c9 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -238,7 +238,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 6ec3a3b7231..8338453430a 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -238,7 +238,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c index 2400753cc1e..ed83bd452c1 100755 --- a/keyboards/dichotomy/matrix.c +++ b/keyboards/dichotomy/matrix.c @@ -210,7 +210,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/dm9records/ergoinu/matrix.c b/keyboards/dm9records/ergoinu/matrix.c index 4a80cf9f24f..b1c58f88fe7 100644 --- a/keyboards/dm9records/ergoinu/matrix.c +++ b/keyboards/dm9records/ergoinu/matrix.c @@ -245,8 +245,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/ergodone/matrix.c b/keyboards/ergodone/matrix.c index 456f73c954d..3973ff3484c 100644 --- a/keyboards/ergodone/matrix.c +++ b/keyboards/ergodone/matrix.c @@ -152,8 +152,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c index e28f754e67e..e5af1c27fd7 100644 --- a/keyboards/ergotaco/matrix.c +++ b/keyboards/ergotaco/matrix.c @@ -220,8 +220,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/georgi/matrix.c b/keyboards/georgi/matrix.c index f0b69c841ab..438412102b5 100644 --- a/keyboards/georgi/matrix.c +++ b/keyboards/georgi/matrix.c @@ -241,8 +241,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c index 080eaea40f3..655e7293566 100644 --- a/keyboards/gergo/matrix.c +++ b/keyboards/gergo/matrix.c @@ -285,8 +285,8 @@ inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index faa5c19cf25..0f4f98ad8dc 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -297,8 +297,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/handwired/datahand/matrix.c b/keyboards/handwired/datahand/matrix.c index a08450d779b..c3f6bd42f3e 100644 --- a/keyboards/handwired/datahand/matrix.c +++ b/keyboards/handwired/datahand/matrix.c @@ -75,7 +75,7 @@ void matrix_print(void) { print("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); + print_hex8(row); print(": "); print_bin_reverse8(matrix_get_row(row)); print("\n"); diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index c9c7e94aea7..5ab254a6f95 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -196,8 +196,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c index aca9daedcb7..b7cec9370c5 100644 --- a/keyboards/handwired/not_so_minidox/matrix.c +++ b/keyboards/handwired/not_so_minidox/matrix.c @@ -261,8 +261,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/handwired/owlet60/matrix.c b/keyboards/handwired/owlet60/matrix.c index dafc19fcc48..211273d1fad 100644 --- a/keyboards/handwired/owlet60/matrix.c +++ b/keyboards/handwired/owlet60/matrix.c @@ -124,7 +124,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index b4a4c6396af..e3a41af288c 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -180,7 +180,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c index 5f13cb30bbd..507f640bd0f 100644 --- a/keyboards/handwired/pterodactyl/matrix.c +++ b/keyboards/handwired/pterodactyl/matrix.c @@ -310,8 +310,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c index 27170e03941..b18213d846b 100644 --- a/keyboards/helix/pico/matrix.c +++ b/keyboards/helix/pico/matrix.c @@ -295,8 +295,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/helix/rev1/matrix.c b/keyboards/helix/rev1/matrix.c index 06ef49b563d..aa2cc76905e 100644 --- a/keyboards/helix/rev1/matrix.c +++ b/keyboards/helix/rev1/matrix.c @@ -261,8 +261,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/helix/rev2/matrix.c b/keyboards/helix/rev2/matrix.c index 8ea070aa3a4..8eed7e58b74 100644 --- a/keyboards/helix/rev2/matrix.c +++ b/keyboards/helix/rev2/matrix.c @@ -309,8 +309,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/hid_liber/matrix.c b/keyboards/hid_liber/matrix.c index 05554a24c8a..ff59a171534 100755 --- a/keyboards/hid_liber/matrix.c +++ b/keyboards/hid_liber/matrix.c @@ -246,8 +246,8 @@ void matrix_print(void) { print("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse8(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c index 2bed690689c..7fef6f0fd85 100755 --- a/keyboards/honeycomb/matrix.c +++ b/keyboards/honeycomb/matrix.c @@ -186,7 +186,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/hotdox/matrix.c b/keyboards/hotdox/matrix.c index 605be30220e..5d0b0f6dd58 100644 --- a/keyboards/hotdox/matrix.c +++ b/keyboards/hotdox/matrix.c @@ -154,8 +154,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/keyboardio/model01/matrix.c b/keyboards/keyboardio/model01/matrix.c index 92cca99137f..450e48d9478 100644 --- a/keyboards/keyboardio/model01/matrix.c +++ b/keyboards/keyboardio/model01/matrix.c @@ -85,8 +85,8 @@ matrix_row_t matrix_get_row(uint8_t row) { void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/kinesis/alvicstep/matrix.c b/keyboards/kinesis/alvicstep/matrix.c index be2bab039cf..71619f8167a 100644 --- a/keyboards/kinesis/alvicstep/matrix.c +++ b/keyboards/kinesis/alvicstep/matrix.c @@ -158,8 +158,8 @@ void matrix_print(void) { print("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse8(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/kmac/matrix.c b/keyboards/kmac/matrix.c index 9bc59a07844..3d5a3081d17 100644 --- a/keyboards/kmac/matrix.c +++ b/keyboards/kmac/matrix.c @@ -72,7 +72,7 @@ void matrix_print(void) { print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); diff --git a/keyboards/kmini/matrix.c b/keyboards/kmini/matrix.c index 7bfb6503558..eee19054eac 100755 --- a/keyboards/kmini/matrix.c +++ b/keyboards/kmini/matrix.c @@ -126,7 +126,7 @@ void matrix_print(void) print("\nr/c 0123456789ABCDEFGHIJKLMNOPQRSTUV \n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_bin_reverse32(matrix_get_row(row)); print("\n"); } diff --git a/keyboards/lily58/rev1/matrix.c b/keyboards/lily58/rev1/matrix.c index eb7e16e24a2..d3ba1c924e7 100755 --- a/keyboards/lily58/rev1/matrix.c +++ b/keyboards/lily58/rev1/matrix.c @@ -310,8 +310,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index 7de188a68c6..c1bfb5868fe 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -183,8 +183,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c index 717a810678f..71c372a3ce8 100644 --- a/keyboards/mitosis/matrix.c +++ b/keyboards/mitosis/matrix.c @@ -139,7 +139,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/moon/matrix.c b/keyboards/moon/matrix.c index c74c70f8977..24b4d49560f 100644 --- a/keyboards/moon/matrix.c +++ b/keyboards/moon/matrix.c @@ -118,7 +118,7 @@ void matrix_print(void) { print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); diff --git a/keyboards/mschwingen/modelm/matrix.c b/keyboards/mschwingen/modelm/matrix.c index ef725a61eb7..ffc1284eadd 100644 --- a/keyboards/mschwingen/modelm/matrix.c +++ b/keyboards/mschwingen/modelm/matrix.c @@ -63,7 +63,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) row_data |= spi_read(); #if DEBUG - phex(~row_data); + print_hex8(~row_data); uprint(" "); #endif // For each row... diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index 1da5b44a3c1..a59598a5033 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -236,7 +236,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c index 15ca66e34d2..703987a9396 100644 --- a/keyboards/redox_w/matrix.c +++ b/keyboards/redox_w/matrix.c @@ -146,7 +146,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/redscarf_iiplus/verb/matrix.c b/keyboards/redscarf_iiplus/verb/matrix.c index 54b0f3a9a10..42cfb7c037b 100755 --- a/keyboards/redscarf_iiplus/verb/matrix.c +++ b/keyboards/redscarf_iiplus/verb/matrix.c @@ -124,7 +124,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/redscarf_iiplus/verc/matrix.c b/keyboards/redscarf_iiplus/verc/matrix.c index 54b0f3a9a10..42cfb7c037b 100755 --- a/keyboards/redscarf_iiplus/verc/matrix.c +++ b/keyboards/redscarf_iiplus/verc/matrix.c @@ -124,7 +124,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c index 28568653c5a..78d1191b68e 100644 --- a/keyboards/redscarf_iiplus/verd/matrix.c +++ b/keyboards/redscarf_iiplus/verd/matrix.c @@ -124,7 +124,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c index 355fa7e5e91..2db6767a46f 100644 --- a/keyboards/sirius/uni660/rev1/matrix.c +++ b/keyboards/sirius/uni660/rev1/matrix.c @@ -144,7 +144,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c index 355fa7e5e91..2db6767a46f 100644 --- a/keyboards/sirius/uni660/rev2/matrix.c +++ b/keyboards/sirius/uni660/rev2/matrix.c @@ -144,7 +144,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index 58647d13b08..6fa0dd14565 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -203,7 +203,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c index 8edfce62d2a..bc7a125e076 100644 --- a/keyboards/telophase/matrix.c +++ b/keyboards/telophase/matrix.c @@ -148,7 +148,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c index e06fc15dc4f..474fbec030c 100644 --- a/keyboards/thedogkeyboard/matrix.c +++ b/keyboards/thedogkeyboard/matrix.c @@ -120,7 +120,7 @@ void matrix_print(void) print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); } diff --git a/keyboards/ymdk/sp64/matrix.c b/keyboards/ymdk/sp64/matrix.c index 8dd2bb8d765..74bddc0578d 100644 --- a/keyboards/ymdk/sp64/matrix.c +++ b/keyboards/ymdk/sp64/matrix.c @@ -137,8 +137,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c index 20efb692299..3db40b3829d 100644 --- a/keyboards/yosino58/rev1/matrix.c +++ b/keyboards/yosino58/rev1/matrix.c @@ -311,8 +311,8 @@ void matrix_print(void) { print("\nr/c 0123456789ABCDEF\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); + print_hex8(row); print(": "); + print_bin_reverse16(matrix_get_row(row)); print("\n"); } } diff --git a/quantum/matrix_common.c b/quantum/matrix_common.c index 01d2b38e5e5..efbad6a5fd1 100644 --- a/quantum/matrix_common.c +++ b/quantum/matrix_common.c @@ -69,7 +69,7 @@ void matrix_print(void) { print_matrix_header(); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); + print_hex8(row); print(": "); print_matrix_row(row); print("\n"); diff --git a/tmk_core/common/command.c b/tmk_core/common/command.c index 59aa4e4d34f..34c4b36b1c0 100644 --- a/tmk_core/common/command.c +++ b/tmk_core/common/command.c @@ -550,22 +550,22 @@ static void mousekey_param_print(void) { # if !defined(NO_PRINT) && !defined(USER_PRINT) print("\n\t- Values -\n"); print("1: delay(*10ms): "); - pdec(mk_delay); + print_dec(mk_delay); print("\n"); print("2: interval(ms): "); - pdec(mk_interval); + print_dec(mk_interval); print("\n"); print("3: max_speed: "); - pdec(mk_max_speed); + print_dec(mk_max_speed); print("\n"); print("4: time_to_max: "); - pdec(mk_time_to_max); + print_dec(mk_time_to_max); print("\n"); print("5: wheel_max_speed: "); - pdec(mk_wheel_max_speed); + print_dec(mk_wheel_max_speed); print("\n"); print("6: wheel_time_to_max: "); - pdec(mk_wheel_time_to_max); + print_dec(mk_wheel_time_to_max); print("\n"); # endif /* !NO_PRINT */ } diff --git a/tmk_core/common/mousekey.c b/tmk_core/common/mousekey.c index d8cf63f7710..63e74baa935 100644 --- a/tmk_core/common/mousekey.c +++ b/tmk_core/common/mousekey.c @@ -471,7 +471,7 @@ void mousekey_clear(void) { static void mousekey_debug(void) { if (!debug_mouse) return; print("mousekey [btn|x y v h](rep/acl): ["); - phex(mouse_report.buttons); + print_hex8(mouse_report.buttons); print("|"); print_decs(mouse_report.x); print(" "); diff --git a/tmk_core/common/print.h b/tmk_core/common/print.h index 647a5aa0530..35fcad0f404 100644 --- a/tmk_core/common/print.h +++ b/tmk_core/common/print.h @@ -258,13 +258,3 @@ extern "C" # define print_val_bin_reverse32(v) #endif /* NO_PRINT */ - -/* Backward compatiblitly for old name */ -#define pdec(data) print_dec(data) -#define pdec16(data) print_dec(data) -#define phex(data) print_hex8(data) -#define phex16(data) print_hex16(data) -#define pbin(data) print_bin8(data) -#define pbin16(data) print_bin16(data) -#define pbin_reverse(data) print_bin_reverse8(data) -#define pbin_reverse16(data) print_bin_reverse16(data) diff --git a/tmk_core/protocol/m0110.c b/tmk_core/protocol/m0110.c index b02a6933d2b..64f2fa50abd 100644 --- a/tmk_core/protocol/m0110.c +++ b/tmk_core/protocol/m0110.c @@ -95,11 +95,11 @@ void m0110_init(void) { uint8_t data; m0110_send(M0110_MODEL); data = m0110_recv(); - print("m0110_init model: "); phex(data); print("\n"); + print("m0110_init model: "); print_hex8(data); print("\n"); m0110_send(M0110_TEST); data = m0110_recv(); - print("m0110_init test: "); phex(data); print("\n"); + print("m0110_init test: "); print_hex8(data); print("\n"); */ } @@ -122,7 +122,7 @@ uint8_t m0110_send(uint8_t data) { return 1; ERROR: print("m0110_send err: "); - phex(m0110_error); + print_hex8(m0110_error); print("\n"); _delay_ms(500); idle(); @@ -146,7 +146,7 @@ uint8_t m0110_recv(void) { return data; ERROR: print("m0110_recv err: "); - phex(m0110_error); + print_hex8(m0110_error); print("\n"); _delay_ms(500); idle(); diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index 8df465026bf..5415453a05f 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -190,7 +190,7 @@ static inline void ps2_mouse_clear_report(report_mouse_t *mouse_report) { static inline void ps2_mouse_print_report(report_mouse_t *mouse_report) { if (!debug_mouse) return; print("ps2_mouse: ["); - phex(mouse_report->buttons); + print_hex8(mouse_report->buttons); print("|"); print_hex8((uint8_t)mouse_report->x); print(" "); From 07a1574732677dd91acde20020b9372cc9c82685 Mon Sep 17 00:00:00 2001 From: Joshua Diamond Date: Sat, 6 Feb 2021 16:04:25 -0500 Subject: [PATCH 115/145] [Keymap] Revamp spidey3 userspace and keymaps (#11768) * Don't block keys during startup animation * More refinements related to startup and debug state * restore key logging * some cleanup on scan rate reporting * trim some fat * better lighting to indicate jumped to bootloader * use eeprom for state restoration * a little reorganization * report version immediately when turn on debug * hold-to-adjust for hue, sat, val * cformat * reorg rules.mk settings, fix compile with CONSOLE_ENABLE=no * simplify spidey3 userspace * NULL in layer list caused buggy behavior * more bugfix * update numpad layout to match matt30 MT3 /dev/tty keycaps * swap emdash and endash * map shift+backspace to delete * removing NO_ACTION_ONSHOT makes the firmware SMALLER ?! * cformat * improve spi_glow * disable shift-backspace = delete by default --- layouts/community/75_ansi/spidey3/config.h | 1 - layouts/community/75_ansi/spidey3/keymap.c | 31 +- layouts/community/75_ansi/spidey3/rules.mk | 2 - users/spidey3/config.h | 5 +- users/spidey3/init.c | 7 +- users/spidey3/layer_rgb.c | 391 ++++++++++++++++----- users/spidey3/rules.mk | 2 + users/spidey3/spidey3.c | 168 +++++---- users/spidey3/spidey3.h | 5 +- users/spidey3/unicode.h | 2 +- 10 files changed, 421 insertions(+), 193 deletions(-) diff --git a/layouts/community/75_ansi/spidey3/config.h b/layouts/community/75_ansi/spidey3/config.h index 7fe098f0e8a..89bd9422ae3 100644 --- a/layouts/community/75_ansi/spidey3/config.h +++ b/layouts/community/75_ansi/spidey3/config.h @@ -1,6 +1,5 @@ #pragma once -#define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION #undef LOCKING_SUPPORT_ENABLE diff --git a/layouts/community/75_ansi/spidey3/keymap.c b/layouts/community/75_ansi/spidey3/keymap.c index d3c4a64ea81..d7ffd61a499 100644 --- a/layouts/community/75_ansi/spidey3/keymap.c +++ b/layouts/community/75_ansi/spidey3/keymap.c @@ -3,7 +3,7 @@ #define FN_MENU LT(_FN,KC_APP) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Linux / Win layout + // Base [_BASE] = LAYOUT_75_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_DEL, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, @@ -12,31 +12,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - // OSX layout - [_OSX] = LAYOUT_75_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_LALT, KC_LGUI, _______, _______, _______, _______, _______, _______, _______ - ), // Numpad [_NUMPAD] = LAYOUT_75_ansi( - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NUMLOCK, KC_PEQL, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, _______, _______, _______, - XXXXXXX, XXXXXXX, XXXXXXX, KC_NUMLOCK, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS, KC_PMNS, KC_PEQL, _______, _______, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, _______, _______, _______, _______, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, KC_SCLN, KC_PENT, _______, - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_0, KC_PDOT, KC_PCMM, KC_PPLS, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + XXXXXXX, XXXXXXX, XXXXXXX, KC_NUMLOCK, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_0, KC_PMNS, KC_PEQL, _______, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PCMM, _______, _______, _______, _______, + KC_NUMLOCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, KC_PAST, KC_PENT, _______, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_KP_0, SPI_KP_00, KC_PDOT, KC_PSLS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), // FN [_FN] = LAYOUT_75_ansi( - RESET, SPI_NORMAL, SPI_WIDE, SPI_SCRIPT, SPI_BLOCKS, SPI_CIRCLE, SPI_SQUARE, SPI_PARENS, SPI_FRAKTR, _______, _______, _______, SPI_GFLOCK, KC_SLEP, KC_WAKE, KC_PWR, - EEP_RST, X(SAD), X(MEH), X(HAPPY), X(ANGRY), X(THUMBDN), X(THUMBUP), X(SPIDER), X_BUL, X(LOL), X(SURPRISE),X_DASH, _______, KC_PAUS, KC_SLCK, - _______, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, RGB_SPD, RGB_SPI, VLK_TOG, _______, _______, KC_BRIU, - _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_G, RGB_M_T, SPI_LNX, _______, _______, _______, KC_BRID, - _______, SPI_GLO, CH_SUSP, SPI_WIN, _______, NK_TOGG, TG(_NUMPAD),SPI_OSX, X(LARR), X(RARR), DEBUG, _______, KC_VOLU, KC_MUTE, + RESET, SPI_NORMAL, SPI_WIDE, SPI_SCRIPT, SPI_BLOCKS, SPI_CIRCLE, SPI_SQUARE, SPI_PARENS, SPI_FRAKTR, XXXXXXX, XXXXXXX, XXXXXXX, SPI_GFLOCK, KC_SLEP, CH_SUSP, KC_PWR, + EEP_RST, X(SAD), X(MEH), X(HAPPY), X(ANGRY), X(THUMBDN), X(THUMBUP), X(SPIDER), X_BUL, X(LOL), X(SURPRISE),X_DASH, XXXXXXX, KC_PAUS, KC_SLCK, + XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, RGB_SPD, RGB_SPI, VLK_TOG, XXXXXXX, XXXXXXX, KC_BRIU, + XXXXXXX, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_G, RGB_M_T, SPI_LNX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BRID, + _______, SPI_GLO, XXXXXXX, SPI_WIN, UC_MOD, NK_TOGG, TG(_NUMPAD),SPI_OSX, X(LARR), X(RARR), DEBUG, _______, KC_VOLU, KC_MUTE, _______, _______, _______, KC_MPLY, CH_ASST, _______, CH_CPNL, KC_MPRV, KC_VOLD, KC_MNXT ) }; diff --git a/layouts/community/75_ansi/spidey3/rules.mk b/layouts/community/75_ansi/spidey3/rules.mk index 7d5c56841e0..10201a5850b 100644 --- a/layouts/community/75_ansi/spidey3/rules.mk +++ b/layouts/community/75_ansi/spidey3/rules.mk @@ -2,8 +2,6 @@ # comment out to disable the options. # MOUSEKEY_ENABLE = no # Mouse keys -CONSOLE_ENABLE = yes # Console for debug -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODEMAP_ENABLE = yes VELOCIKEY_ENABLE = yes GRAVE_ESC_ENABLE = no diff --git a/users/spidey3/config.h b/users/spidey3/config.h index 053240718e6..7062fde0305 100644 --- a/users/spidey3/config.h +++ b/users/spidey3/config.h @@ -3,9 +3,10 @@ #define LED_DISABLE_WHEN_USB_SUSPENDED true #define RGB_DISABLE_WHEN_USB_SUSPENDED true #define RGBLIGHT_LAYERS -#define RGBLIGHT_MAX_LAYERS 16 +#define RGBLIGHT_MAX_LAYERS 17 #define RGBLIGHT_LAYER_BLINK #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF +#define RGBLIGHT_STARTUP_ANIMATION #undef RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_BREATHING @@ -17,6 +18,8 @@ #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE +#define UNICODE_SELECTED_MODES UC_MAC, UC_LNX, UC_WINC + #define SPI_DEBUG_SCAN_RATE #undef MANUFACTURER diff --git a/users/spidey3/init.c b/users/spidey3/init.c index 273c2b28992..8db41a5f4c7 100644 --- a/users/spidey3/init.c +++ b/users/spidey3/init.c @@ -18,11 +18,6 @@ void eeconfig_init_user(void) { #endif } -void shutdown_user() { #ifdef RGBLIGHT_ENABLE - clear_rgb_layers(); - rgblight_enable(); - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - rgblight_sethsv_noeeprom(HSV_RED); +void shutdown_user(void) { shutdown_user_rgb(); } #endif -} diff --git a/users/spidey3/layer_rgb.c b/users/spidey3/layer_rgb.c index 160cc43174d..37e59579cf6 100644 --- a/users/spidey3/layer_rgb.c +++ b/users/spidey3/layer_rgb.c @@ -2,6 +2,7 @@ #include "spidey3.h" #include "velocikey.h" +#include uint32_t rgb_mode; uint16_t rgb_hue; @@ -9,10 +10,17 @@ uint8_t rgb_sat; uint8_t rgb_val; bool rgb_saved = 0; +extern bool spi_gflock; +extern uint16_t spi_replace_mode; + void spidey_glow(void) { rgblight_enable(); - rgblight_mode(RGBLIGHT_MODE_TWINKLE + 4); rgblight_sethsv(213, 255, 128); + if ((RGBLIGHT_MODE_TWINKLE <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_TWINKLE_end)) { + rgblight_step(); + } else { + rgblight_mode(RGBLIGHT_MODE_TWINKLE); + } #ifdef VELOCIKEY_ENABLE if (velocikey_enabled()) velocikey_toggle(); #endif @@ -23,6 +31,7 @@ void eeconfig_init_user_rgb(void) { spidey_glow(); } // clang-format off // Convenience macros +#define NONE { RGBLIGHT_END_SEGMENTS } #define CORNER_BL(color) { 0, 1, color } #define CORNER_BR(color) { RGBLED_NUM / 2 - 1, 1, color } #define CORNER_FR(color) { RGBLED_NUM / 2, 1, color } @@ -31,10 +40,12 @@ void eeconfig_init_user_rgb(void) { spidey_glow(); } #define FRONT(inset, color) { RGBLED_NUM / 2 + inset, RGBLED_NUM / 2 - 2 * inset, color } #define BACK(inset, color) { inset, RGBLED_NUM / 2 - 2 * inset, color } +const rgblight_segment_t PROGMEM _none[] = NONE; + #define LAYER_OFFSET 0 -const rgblight_segment_t PROGMEM _layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNER_BR(HSV_PURPLE)); -const rgblight_segment_t PROGMEM _layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNERS(HSV_MAGENTA)); -const rgblight_segment_t PROGMEM _layer3_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNERS(HSV_GREEN)); +// No indicator for base layer +const rgblight_segment_t PROGMEM _layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNERS(HSV_MAGENTA)); // _NUMPAD +const rgblight_segment_t PROGMEM _layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNERS(HSV_GREEN)); // _FN #define LOCK_OFFSET 3 const rgblight_segment_t PROGMEM _numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(FRONT(3, HSV_YELLOW)); @@ -49,12 +60,20 @@ const rgblight_segment_t PROGMEM _glyphreplace_layer[] = RGBLIGHT_LAYER_SEGMENTS const rgblight_segment_t PROGMEM _no_layer[] = RGBLIGHT_LAYER_SEGMENTS(FRONT(1, HSV_RED)); const rgblight_segment_t PROGMEM _yes_layer[] = RGBLIGHT_LAYER_SEGMENTS(FRONT(1, HSV_GREEN)); const rgblight_segment_t PROGMEM _meh_layer[] = RGBLIGHT_LAYER_SEGMENTS(FRONT(1, HSV_YELLOW)); +const rgblight_segment_t PROGMEM _huh_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNERS(HSV_YELLOW), FRONT(1, HSV_BLUE), BACK(1, HSV_BLUE)); + +#define UNICODE_OFFSET 12 +const rgblight_segment_t PROGMEM _uc_mac_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNER_BR(HSV_PURPLE)); +// No indicator for UC_LNX +// UC_WIN disabled in config.h +// UC_BSD not implemented +const rgblight_segment_t PROGMEM _uc_winc_layer[] = RGBLIGHT_LAYER_SEGMENTS(CORNER_BR(HSV_CYAN)); // Now define the array of layers. Higher numbered layers take precedence. const rgblight_segment_t *const PROGMEM _rgb_layers[] = { - [LAYER_OFFSET + 0] = _layer1_layer, - [LAYER_OFFSET + 1] = _layer2_layer, - [LAYER_OFFSET + 2] = _layer3_layer, + [LAYER_OFFSET + _BASE] = _none, + [LAYER_OFFSET + _NUMPAD] = _layer1_layer, + [LAYER_OFFSET + _FN] = _layer2_layer, [LOCK_OFFSET + USB_LED_NUM_LOCK] = _numlock_layer, [LOCK_OFFSET + USB_LED_CAPS_LOCK] = _capslock_layer, @@ -66,11 +85,18 @@ const rgblight_segment_t *const PROGMEM _rgb_layers[] = { [ACK_OFFSET + ACK_NO] = _no_layer, [ACK_OFFSET + ACK_YES] = _yes_layer, [ACK_OFFSET + ACK_MEH] = _meh_layer, + [ACK_OFFSET + ACK_HUH] = _huh_layer, - [ACK_OFFSET + ACK_MEH + 1] = NULL + [UNICODE_OFFSET + UC_MAC] = _uc_mac_layer, + [UNICODE_OFFSET + UC_LNX] = _none, + [UNICODE_OFFSET + UC_WIN] = _none, + [UNICODE_OFFSET + UC_BSD] = _none, + [UNICODE_OFFSET + UC_WINC] = _uc_winc_layer, + + [UNICODE_OFFSET + UC__COUNT] = NULL }; -// clang-format on +// clang-format on const uint8_t PROGMEM _n_rgb_layers = sizeof(_rgb_layers) / sizeof(_rgb_layers[0]) - 1; @@ -84,118 +110,259 @@ void clear_rgb_layers() { void do_rgb_layers(layer_state_t state, uint8_t start, uint8_t end) { for (uint8_t i = start; i < end; i++) { bool is_on = layer_state_cmp(state, i); - dprintf("layer[%u]=%u\n", i, is_on); - rgblight_set_layer_state(LAYER_OFFSET + i - 1, is_on); + dprintf("layer[%u]=rl[%u]=%u\n", i, LAYER_OFFSET + i, is_on); + rgblight_set_layer_state(LAYER_OFFSET + i, is_on); } } +void do_rgb_unicode(void) { + uint8_t uc_mode = get_unicode_input_mode(); + for (uint8_t i = 0; i < UC__COUNT; i++) { + bool is_on = i == uc_mode; + dprintf("unicode[%u]=rl[%u]=%u\n", i, UNICODE_OFFSET + i, is_on); + rgblight_set_layer_state(UNICODE_OFFSET + i, is_on); + } +} + +void do_rgb_all(void) { + do_rgb_layers(default_layer_state, LAYER_BASE_DEFAULT, LAYER_BASE_REGULAR); + do_rgb_layers(layer_state, LAYER_BASE_REGULAR, LAYER_BASE_END); + do_rgb_unicode(); + rgblight_set_layer_state(MISC_OFFSET + 0, spi_gflock); + rgblight_set_layer_state(MISC_OFFSET + 1, spi_replace_mode != SPI_NORMAL); +} + +// flags. 0 = no change, 1 = increment, -1 = decrement. +int8_t change_hue = 0; +int8_t change_sat = 0; +int8_t change_val = 0; + +// timer to control color change speed +uint16_t change_timer = 0; +const uint16_t change_tick = 15; + extern rgblight_config_t rgblight_config; extern rgblight_status_t rgblight_status; -static bool startup_animation_done = false; + +#if defined(RGBLIGHT_STARTUP_ANIMATION) + +#define STARTUP_ANIMATION_SATURATION 200 +#define STARTUP_ANIMATION_VALUE 255 +#define STARTUP_ANIMATION_FADE_STEP 5 +#define STARTUP_ANIMATION_CYCLE_STEP 2 +#define STARTUP_ANIMATION_RAMP_TO_STEPS 70 +#define STARTUP_ANIMATION_STEP_TIME 10 +#define STARTUP_ANIMATION_INITIAL_DELAY 0 // milliseconds, must be < 255 * STEP_TIME + +typedef enum { + DISABLED, + WAITING, + RESTART, + START, + FADE_OLD, + FADE_IN, + CYCLE, + RAMP_DOWN, + RAMP_TO, + CLEAN_UP, + DONE +} startup_animation_state_t; + +static rgblight_config_t old_config; +static uint8_t old_base_mode; +static startup_animation_state_t startup_animation_state = DISABLED; +static uint16_t rgblight_startup_loop_timer; + +void startup_animation_init(void) { + old_config.raw = rgblight_config.raw; + old_base_mode = rgblight_status.base_mode; + + if (!old_config.enable) + rgblight_enable_noeeprom(); +} +#endif void keyboard_post_init_user_rgb(void) { // Enable the LED layers rgblight_layers = _rgb_layers; - do_rgb_layers(default_layer_state, LAYER_BASE_DEFAULT + 1, LAYER_BASE_REGULAR); - do_rgb_layers(layer_state, LAYER_BASE_REGULAR, LAYER_BASE_END); + do_rgb_all(); - // Startup animation - { - bool is_enabled = rgblight_config.enable; - uint8_t old_hue = rgblight_config.hue; - uint8_t old_sat = rgblight_config.sat; - uint8_t old_val = rgblight_config.val; - uint8_t old_mode = rgblight_config.mode; +#if defined(RGBLIGHT_STARTUP_ANIMATION) + startup_animation_init(); + startup_animation_state = STARTUP_ANIMATION_INITIAL_DELAY ? WAITING : START; +#endif +} - bool ramp_down = +void matrix_scan_user_rgb(void) { +#if defined(RGBLIGHT_STARTUP_ANIMATION) + if (startup_animation_state != DONE && is_keyboard_master()) { + if (startup_animation_state == START || timer_elapsed(rgblight_startup_loop_timer) > STARTUP_ANIMATION_STEP_TIME) { + static uint8_t counter; + rgblight_startup_loop_timer = timer_read(); + + switch (startup_animation_state) { + case WAITING: +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua WAITING counter=%u\n", counter); +#endif + if (counter < STARTUP_ANIMATION_INITIAL_DELAY / STARTUP_ANIMATION_STEP_TIME) { + counter++; + } else { + startup_animation_state = START; + } + break; + + case RESTART: + dprintln("sua RESTART"); + startup_animation_init(); + case START: + dprintln("sua START"); + startup_animation_state = FADE_OLD; + counter = old_config.val; + // No break! Just roll into FADE_OLD in the same iteration... + + case FADE_OLD: +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua FADE_OLD counter=%u\n", counter); +#endif + if (counter >= STARTUP_ANIMATION_FADE_STEP) { + rgblight_sethsv_noeeprom(old_config.hue, old_config.sat, counter); + counter -= STARTUP_ANIMATION_FADE_STEP; + } else { + counter = 0; + startup_animation_state = FADE_IN; + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + } + break; + + case FADE_IN: +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua FADE_IN counter=%u\n", counter); +#endif + if (counter < STARTUP_ANIMATION_VALUE) { + rgblight_sethsv_noeeprom(old_config.hue, STARTUP_ANIMATION_SATURATION, counter); + counter += STARTUP_ANIMATION_FADE_STEP; + } else { + counter = 255; + startup_animation_state = CYCLE; + } + break; + + case CYCLE: +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua CYCLE counter=%u\n", counter); +#endif + if (counter >= STARTUP_ANIMATION_CYCLE_STEP) { + rgblight_sethsv_noeeprom((counter + old_config.hue) % 255, STARTUP_ANIMATION_SATURATION, STARTUP_ANIMATION_VALUE); + counter -= STARTUP_ANIMATION_CYCLE_STEP; + } else { + if ( #ifdef RGBLIGHT_EFFECT_BREATHING - (rgblight_status.base_mode == RGBLIGHT_MODE_BREATHING) || + (old_base_mode == RGBLIGHT_MODE_BREATHING) || #endif #ifdef RGBLIGHT_EFFECT_SNAKE - (rgblight_status.base_mode == RGBLIGHT_MODE_SNAKE) || + (old_base_mode == RGBLIGHT_MODE_SNAKE) || #endif #ifdef RGBLIGHT_EFFECT_KNIGHT - (rgblight_status.base_mode == RGBLIGHT_MODE_KNIGHT) || + (old_base_mode == RGBLIGHT_MODE_KNIGHT) || #endif #ifdef RGBLIGHT_EFFECT_TWINKLE - (rgblight_status.base_mode == RGBLIGHT_MODE_TWINKLE) || + (old_base_mode == RGBLIGHT_MODE_TWINKLE) || #endif - !is_enabled; - - bool ramp_to = + !old_config.enable) { + counter = STARTUP_ANIMATION_VALUE; + startup_animation_state = RAMP_DOWN; + } else if ( #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT - (rgblight_status.base_mode == RGBLIGHT_MODE_STATIC_GRADIENT) || + (old_base_mode == RGBLIGHT_MODE_STATIC_GRADIENT) || #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) || + (old_base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) || #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) || + (old_base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) || #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_CHRISTMAS - (rgblight_status.base_mode == RGBLIGHT_MODE_CHRISTMAS) || + (old_base_mode == RGBLIGHT_MODE_CHRISTMAS) || #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_RGB_TEST_ - (rgblight_status.base_mode == RGBLIGHT_MODE_RGB_TEST) || + (old_base_mode == RGBLIGHT_MODE_RGB_TEST) || #endif - (rgblight_status.base_mode == RGBLIGHT_MODE_STATIC_LIGHT); + (old_base_mode == RGBLIGHT_MODE_STATIC_LIGHT)) { + counter = 0; + startup_animation_state = RAMP_TO; + } else { + startup_animation_state = CLEAN_UP; + } + } + break; -#define STARTUP_ANIMATION_SATURATION 200 -#define STARTUP_ANIMATION_VALUE 255 -#define STARTUP_ANIMATION_STEP 5 + case RAMP_DOWN: +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua RAMP_DOWN counter=%u\n", counter); +#endif + if (counter >= STARTUP_ANIMATION_FADE_STEP) { + rgblight_sethsv_noeeprom(old_config.hue, STARTUP_ANIMATION_SATURATION, counter); + counter -= STARTUP_ANIMATION_FADE_STEP; + } else { + startup_animation_state = CLEAN_UP; + } + break; - rgblight_enable_noeeprom(); - if (rgblight_config.enable) { - rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); - for (uint8_t i = 0; i < STARTUP_ANIMATION_VALUE; i += STARTUP_ANIMATION_STEP) { - rgblight_sethsv_noeeprom(old_hue, STARTUP_ANIMATION_SATURATION, i); - matrix_scan(); - wait_ms(10); - } - for (uint8_t i = 255; i > 0; i -= STARTUP_ANIMATION_STEP) { - rgblight_sethsv_noeeprom((i + old_hue) % 255, STARTUP_ANIMATION_SATURATION, STARTUP_ANIMATION_VALUE); - matrix_scan(); - wait_ms(10); - } + case RAMP_TO: + { +#ifdef STARTUP_ANIMATION_DEBUG + dprintf("sua RAMP_TO s=%u, v=%u, counter=%u\n", old_config.sat, old_config.val, counter); +#endif + uint8_t steps = STARTUP_ANIMATION_RAMP_TO_STEPS; + if (counter < steps) { + uint8_t s = STARTUP_ANIMATION_SATURATION + counter * (((float)old_config.sat - STARTUP_ANIMATION_SATURATION) / (float)steps); + uint8_t v = STARTUP_ANIMATION_VALUE + counter * (((float)old_config.val - STARTUP_ANIMATION_VALUE) / (float)steps); + rgblight_sethsv_noeeprom(old_config.hue, s, v); + counter++; + } else { + startup_animation_state = CLEAN_UP; + } + } + break; - if (ramp_down) { - dprintln("ramp_down"); - for (uint8_t i = STARTUP_ANIMATION_VALUE; i > 0; i -= STARTUP_ANIMATION_STEP) { - rgblight_sethsv_noeeprom(old_hue, STARTUP_ANIMATION_SATURATION, i); - matrix_scan(); - wait_ms(10); - } - } else if (ramp_to) { - dprintf("ramp_to s=%u, v=%u\n", old_sat, old_val); - uint8_t steps = 50; - for (uint8_t i = 0; i < steps; i++) { - uint8_t s = STARTUP_ANIMATION_SATURATION + i * (((float)old_sat - STARTUP_ANIMATION_SATURATION) / (float)steps); - uint8_t v = STARTUP_ANIMATION_VALUE + i * (((float)old_val - STARTUP_ANIMATION_VALUE) / (float)steps); - rgblight_sethsv_noeeprom(old_hue, s, v); - matrix_scan(); - wait_ms(10); - } + case CLEAN_UP: + dprintln("sua CLEAN_UP"); + rgblight_reload_from_eeprom(); + startup_animation_state = DONE; + dprintln("sua DONE"); + break; + + default: + break; } - rgblight_mode_noeeprom(old_mode); } - if (is_enabled) { - rgblight_sethsv_noeeprom(old_hue, old_sat, old_val); - } else { - rgblight_disable_noeeprom(); - // Hack! - // rgblight_sethsv_noeeprom() doesn't update these if rgblight is disabled, - // but if do it before disabling we get an ugly flash. - rgblight_config.hue = old_hue; - rgblight_config.sat = old_sat; - rgblight_config.val = old_val; + } +#endif + + if (change_hue != 0 || change_val != 0 || change_sat != 0) { + if (timer_elapsed(change_timer) > change_tick) { + HSV hsv = rgblight_get_hsv(); + hsv.h += change_hue; + hsv.s = change_sat > 0 ? qadd8(hsv.s, (uint8_t) change_sat) : qsub8(hsv.s, (uint8_t) -change_sat); + hsv.v = change_val > 0 ? qadd8(hsv.v, (uint8_t) change_val) : qsub8(hsv.v, (uint8_t) -change_val); + rgblight_sethsv_noeeprom(hsv.h, hsv.s, hsv.v); + change_timer = timer_read(); } - dprint("done\n"); - startup_animation_done = true; + } +} + +void shutdown_user_rgb(void) { + clear_rgb_layers(); + rgblight_enable_noeeprom(); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + for (int i = 0; i < RGBLED_NUM; i++) { + rgblight_setrgb_at(0xFF, 0x80 * (i % 2), 0, i); } } layer_state_t default_layer_state_set_user_rgb(layer_state_t state) { - do_rgb_layers(state, 1u, LAYER_BASE_REGULAR); + do_rgb_layers(state, LAYER_BASE_DEFAULT, LAYER_BASE_REGULAR); return state; } @@ -225,15 +392,45 @@ void rgb_layer_ack(layer_ack_t n) { extern keymap_config_t keymap_config; extern rgblight_config_t rgblight_config; -extern bool spi_gflock; -extern uint16_t spi_replace_mode; - bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { switch (keycode) { case SPI_GLO: spidey_glow(); return false; + + // clang-format off + case RGB_HUI: change_timer = timer_read(); change_hue = 1; return false; + case RGB_HUD: change_timer = timer_read(); change_hue = -1; return false; + case RGB_SAI: change_timer = timer_read(); change_sat = 1; return false; + case RGB_SAD: change_timer = timer_read(); change_sat = -1; return false; + case RGB_VAI: change_timer = timer_read(); change_val = 1; return false; + case RGB_VAD: change_timer = timer_read(); change_val = -1; return false; + // clang-format on + } + } else { + bool rgb_done = false; + switch (keycode) { + case RGB_HUI: + case RGB_HUD: + change_hue = 0; + rgb_done = true; + break; + case RGB_SAI: + case RGB_SAD: + change_sat = 0; + rgb_done = true; + break; + case RGB_VAI: + case RGB_VAD: + change_val = 0; + rgb_done = true; + break; + } + + if (rgb_done) { + HSV final = rgblight_get_hsv(); + rgblight_sethsv(final.h, final.s, final.v); } } @@ -244,13 +441,12 @@ void post_process_record_user_rgb(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // Acks follow... case DEBUG: - rgb_layer_ack_yn(debug_enable); - break; - - case SPI_LNX: - case SPI_OSX: - case SPI_WIN: - rgb_layer_ack(ACK_MEH); + if (debug_matrix || debug_keyboard) + rgb_layer_ack(ACK_HUH); + else if (debug_enable) + rgb_layer_ack(ACK_YES); + else + rgb_layer_ack(ACK_NO); break; case SPI_GFLOCK: @@ -280,5 +476,16 @@ void post_process_record_user_rgb(uint16_t keycode, keyrecord_t *record) { rgb_layer_ack_yn(keymap_config.nkro); break; #endif + +#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) + case SPI_LNX: + case SPI_OSX: + case SPI_WIN: + case UC_MOD: + case UC_RMOD: + rgb_layer_ack(ACK_MEH); + do_rgb_unicode(); + break; +#endif } } diff --git a/users/spidey3/rules.mk b/users/spidey3/rules.mk index 2d4da22946c..bd378f545e8 100644 --- a/users/spidey3/rules.mk +++ b/users/spidey3/rules.mk @@ -1,4 +1,6 @@ BOOTMAGIC_ENABLE = lite +CONSOLE_ENABLE = yes # Console for debug +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality LTO_ENABLE = yes SRC += init.c diff --git a/users/spidey3/spidey3.c b/users/spidey3/spidey3.c index a8dafcb7b54..df73c903d06 100644 --- a/users/spidey3/spidey3.c +++ b/users/spidey3/spidey3.c @@ -14,49 +14,44 @@ static uint32_t matrix_scan_count = 0; static bool reported_version = false; # if defined(SPI_DEBUG_SCAN_RATE) -static uint32_t matrix_timer = 0; -static uint32_t last_matrix_scan_count = 0; +static uint32_t matrix_timer = 0; # endif +void report_version(void) { + uprintln(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE); + reported_version = true; +} +#endif + void matrix_scan_user(void) { +#if defined(CONSOLE_ENABLE) && !defined(NO_DEBUG) # if defined(SPI_DEBUG_SCAN_RATE) matrix_scan_count++; if (debug_enable) { uint32_t timer_now = timer_read32(); if (matrix_timer == 0) { - matrix_timer = timer_now; - last_matrix_scan_count = matrix_scan_count; - matrix_scan_count = 0; + matrix_timer = timer_now; + matrix_scan_count = 0; } else if (TIMER_DIFF_32(timer_now, matrix_timer) > SPI_SCAN_RATE_INTERVAL * 1000) { - matrix_timer = timer_now; - last_matrix_scan_count = matrix_scan_count; - matrix_scan_count = 0; - if (!reported_version) { - uprintln(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE); - reported_version = true; - } - uprintf("scan rate: %lu/s\n", last_matrix_scan_count / SPI_SCAN_RATE_INTERVAL); + matrix_timer = timer_now; + uprintf("scan rate: %lu/s\n", matrix_scan_count / SPI_SCAN_RATE_INTERVAL); + matrix_scan_count = 0; + if (!reported_version) report_version(); } } # else if (!reported_version) { matrix_scan_count++; - if (matrix_scan_count > 300) { - uprintln(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE); - reported_version = true; - } + if (matrix_scan_count > 300) report_version(); } # endif +#endif +#ifdef RGBLIGHT_ENABLE + matrix_scan_user_rgb(); +#endif } -#endif -bool process_record_glyph_replacement(uint16_t keycode, keyrecord_t *record, uint32_t baseAlphaLower, uint32_t baseAlphaUpper, uint32_t zeroGlyph, uint32_t baseNumberOne, uint32_t spaceGlyph) { - uint8_t temp_mod = get_mods(); -#ifndef NO_ACTION_ONESHOT - uint8_t temp_osm = get_oneshot_mods(); -#else - uint8_t temp_osm = 0; -#endif +bool process_record_glyph_replacement(uint16_t keycode, keyrecord_t *record, uint32_t baseAlphaLower, uint32_t baseAlphaUpper, uint32_t zeroGlyph, uint32_t baseNumberOne, uint32_t spaceGlyph, uint8_t temp_mod, uint8_t temp_osm) { if ((((temp_mod | temp_osm) & (MOD_MASK_CTRL | MOD_MASK_ALT | MOD_MASK_GUI))) == 0) { switch (keycode) { case KC_A ... KC_Z: @@ -121,21 +116,43 @@ bool process_gflock(uint16_t keycode, keyrecord_t *record) { } bool process_record_user(uint16_t keycode, keyrecord_t *record) { + dprintf("key event: kc: %02X, col: %02u, row: %02u, pressed: %u mods: %08b " +#if !defined(NO_ACTION_ONESHOT) + "os: %08b " +#endif + "weak: %08b\n", + keycode, record->event.key.col, record->event.key.row, record->event.pressed, bitrev(get_mods()), +#if !defined(NO_ACTION_ONESHOT) + bitrev(get_oneshot_mods()), +#endif + bitrev(get_weak_mods())); + if (!rand_seeded) { srand(record->event.time % keycode); rand_seeded = true; } + uint8_t mods = get_mods(); +#ifndef NO_ACTION_ONESHOT + uint8_t osm = get_oneshot_mods(); +#else + uint8_t osm = 0; +#endif + if (record->event.pressed) { switch (keycode) { #ifndef NO_DEBUG // Re-implement this here, but fix the persistence! case DEBUG: - if (!debug_enable) { + if (get_mods() & MOD_MASK_SHIFT) { + debug_enable = 0; + debug_keyboard = 0; + debug_matrix = 0; + } else if (!debug_enable) { debug_enable = 1; # if defined(SPI_DEBUG_SCAN_RATE) - matrix_timer = 0; - reported_version = false; + matrix_timer = 0; + report_version(); # endif } else if (!debug_keyboard) { debug_keyboard = 1; @@ -157,32 +174,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case CH_ASST: host_consumer_send(AL_ASSISTANT); return false; case CH_SUSP: tap_code16(LGUI(LSFT(KC_L))); return true; +#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) + case SPI_LNX: set_unicode_input_mode(UC_LNX); break; + case SPI_OSX: set_unicode_input_mode(UC_OSX); break; + case SPI_WIN: set_unicode_input_mode(UC_WINC); break; +#endif // clang-format on - case SPI_LNX: - dprint("SPI_LNX\n"); - set_single_persistent_default_layer(_BASE); - layer_off(_OSX); -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) - set_unicode_input_mode(UC_LNX); -#endif - break; - case SPI_OSX: - dprint("SPI_OSX\n"); - set_single_persistent_default_layer(_OSX); -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) - set_unicode_input_mode(UC_OSX); -#endif - break; - case SPI_WIN: - dprint("SPI_WIN\n"); - set_single_persistent_default_layer(_BASE); - layer_off(_OSX); -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) - set_unicode_input_mode(UC_WINC); -#endif - break; - case SPI_NORMAL ... SPI_FRAKTR: spi_replace_mode = (spi_replace_mode == keycode) ? SPI_NORMAL : keycode; dprintf("spi_replace_mode = %u\n", spi_replace_mode); @@ -193,14 +191,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { dprintf("spi_gflock = %u\n", spi_gflock); break; - case KC_PSCR: { - uint8_t mods = get_mods(); -#ifndef NO_ACTION_ONESHOT - uint8_t osm = get_oneshot_mods(); -#else - uint8_t osm = 0; + case SPI_KP_00: + tap_code(KC_KP_0); +#if TAP_CODE_DELAY > 0 + wait_ms(TAP_CODE_DELAY); #endif + register_code(KC_KP_0); + return false; + case KC_PSCR: { + // It's kind of a hack, but we use unicode input mode + // to determine what Print Screen key should do. The + // idea here is to make it consistent across hosts. switch (get_unicode_input_mode()) { case UC_MAC: if ((mods | osm) & MOD_MASK_ALT) { @@ -265,6 +267,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case CH_ASST: host_consumer_send(0); return false; + + case SPI_KP_00: + unregister_code(KC_KP_0); + return false; } } @@ -273,32 +279,56 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case KC_SPACE: switch (spi_replace_mode) { case SPI_WIDE: - return process_record_glyph_replacement(keycode, record, 0xFF41, 0xFF21, 0xFF10, 0xFF11, 0x2003); + return process_record_glyph_replacement(keycode, record, 0xFF41, 0xFF21, 0xFF10, 0xFF11, 0x2003, mods, osm); case SPI_SCRIPT: - return process_record_glyph_replacement(keycode, record, 0x1D4EA, 0x1D4D0, 0x1D7CE, 0x1D7CF, 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1D4EA, 0x1D4D0, 0x1D7CE, 0x1D7CF, 0x2002, mods, osm); case SPI_BLOCKS: - return process_record_glyph_replacement(keycode, record, 0x1F170, 0x1F170, '0', '1', 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1F170, 0x1F170, '0', '1', 0x2002, mods, osm); case SPI_CIRCLE: - return process_record_glyph_replacement(keycode, record, 0x1F150, 0x1F150, '0', '1', 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1F150, 0x1F150, '0', '1', 0x2002, mods, osm); case SPI_SQUARE: - return process_record_glyph_replacement(keycode, record, 0x1F130, 0x1F130, '0', '1', 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1F130, 0x1F130, '0', '1', 0x2002, mods, osm); case SPI_PARENS: - return process_record_glyph_replacement(keycode, record, 0x1F110, 0x1F110, '0', '1', 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1F110, 0x1F110, '0', '1', 0x2002, mods, osm); case SPI_FRAKTR: - return process_record_glyph_replacement(keycode, record, 0x1D586, 0x1D56C, '0', '1', 0x2002); + return process_record_glyph_replacement(keycode, record, 0x1D586, 0x1D56C, '0', '1', 0x2002, mods, osm); } break; case KC_F1 ... KC_F12: return process_gflock(keycode, record); + +#ifdef SHIFT_BACKSPACE_DELETE + case KC_BSPC: { + static bool delkey_registered; + if (record->event.pressed) { + if ((mods | osm) & MOD_MASK_SHIFT) { + del_mods(MOD_MASK_SHIFT); +#ifndef NO_ACTION_ONESHOT + clear_oneshot_mods(); +#endif + register_code(KC_DEL); + delkey_registered = true; + set_mods(mods); + return false; + } + } else { // on release of KC_BSPC + // In case KC_DEL is still being sent even after the release of KC_BSPC + if (delkey_registered) { + unregister_code(KC_DEL); + delkey_registered = false; + return false; + } + } + } +#endif } #ifdef RGBLIGHT_ENABLE - bool res = process_record_user_rgb(keycode, record); - if (!res) return false; -#endif - + return process_record_user_rgb(keycode, record); +#else return true; +#endif } void post_process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/users/spidey3/spidey3.h b/users/spidey3/spidey3.h index 5bfba4e5928..d018e5defb5 100644 --- a/users/spidey3/spidey3.h +++ b/users/spidey3/spidey3.h @@ -8,7 +8,6 @@ enum userspace_layers { _BASE = 0, - _OSX, _NUMPAD, _FN, }; @@ -31,6 +30,7 @@ enum custom_keycodes { SPI_PARENS, SPI_FRAKTR, SPI_GFLOCK, + SPI_KP_00, }; #ifdef RGBLIGHT_ENABLE @@ -45,12 +45,14 @@ typedef enum layer_ack { ACK_NO = 0, ACK_YES, ACK_MEH, + ACK_HUH, } layer_ack_t; # define RGB_LAYER_ACK_DURATION 500 void eeconfig_init_user_rgb(void); void matrix_init_user_rgb(void); +void matrix_scan_user_rgb(void); void keyboard_post_init_user_rgb(void); bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record); void post_process_record_user_rgb(uint16_t keycode, keyrecord_t *record); @@ -60,6 +62,7 @@ bool led_update_user_rgb(led_t led_state); void rgb_layer_ack(layer_ack_t n); void rgb_layer_ack_yn(bool yn); void clear_rgb_layers(void); +void shutdown_user_rgb(void); #endif #ifdef UNICODEMAP_ENABLE diff --git a/users/spidey3/unicode.h b/users/spidey3/unicode.h index db7824983b1..6182669fb05 100644 --- a/users/spidey3/unicode.h +++ b/users/spidey3/unicode.h @@ -23,6 +23,6 @@ enum unicode_names { }; # define X_BUL (XP(BUL1, BUL2)) -# define X_DASH (XP(ENDASH, EMDASH)) +# define X_DASH (XP(EMDASH, ENDASH)) #endif From 02881427692b682287d19fe533c3b84aa7b42a26 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 7 Feb 2021 13:56:08 +0000 Subject: [PATCH 116/145] Migrate mousekey to quantum (#11804) --- common_features.mk | 6 ++++++ {tmk_core/common => quantum}/mousekey.c | 0 {tmk_core/common => quantum}/mousekey.h | 2 +- tmk_core/common.mk | 4 ---- 4 files changed, 7 insertions(+), 5 deletions(-) rename {tmk_core/common => quantum}/mousekey.c (100%) rename {tmk_core/common => quantum}/mousekey.h (99%) diff --git a/common_features.mk b/common_features.mk index 6365955a7f9..7c956cbf2fa 100644 --- a/common_features.mk +++ b/common_features.mk @@ -79,6 +79,12 @@ ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes) SRC += $(QUANTUM_DIR)/fauxclicky.c endif +ifeq ($(strip $(MOUSEKEY_ENABLE)), yes) + OPT_DEFS += -DMOUSEKEY_ENABLE + OPT_DEFS += -DMOUSE_ENABLE + SRC += $(QUANTUM_DIR)/mousekey.c +endif + ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes) OPT_DEFS += -DPOINTING_DEVICE_ENABLE OPT_DEFS += -DMOUSE_ENABLE diff --git a/tmk_core/common/mousekey.c b/quantum/mousekey.c similarity index 100% rename from tmk_core/common/mousekey.c rename to quantum/mousekey.c diff --git a/tmk_core/common/mousekey.h b/quantum/mousekey.h similarity index 99% rename from tmk_core/common/mousekey.h rename to quantum/mousekey.h index 52b8fe10e11..70dc4bb5c54 100644 --- a/tmk_core/common/mousekey.h +++ b/quantum/mousekey.h @@ -17,7 +17,7 @@ along with this program. If not, see . #pragma once -#include +#include #include "host.h" #ifndef MK_3_SPEED diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 05839824c08..0e189962be5 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -68,10 +68,6 @@ ifeq ($(strip $(KEYBOARD_SHARED_EP)), yes) endif ifeq ($(strip $(MOUSEKEY_ENABLE)), yes) - TMK_COMMON_SRC += $(COMMON_DIR)/mousekey.c - TMK_COMMON_DEFS += -DMOUSEKEY_ENABLE - TMK_COMMON_DEFS += -DMOUSE_ENABLE - ifeq ($(strip $(MOUSE_SHARED_EP)), yes) TMK_COMMON_DEFS += -DMOUSE_SHARED_EP SHARED_EP_ENABLE = yes From 9146d30f06362b768778414ca5381183c45b7431 Mon Sep 17 00:00:00 2001 From: Alexander Ulitin <1911626+ulex@users.noreply.github.com> Date: Sun, 7 Feb 2021 17:43:39 +0100 Subject: [PATCH 117/145] [Bug] Fix media key missing upstroke event (#11162) [Bug] Pressing media key on a momentarily activated layer may leads to missing key up events. --- tmk_core/common/action.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index a3830abbff0..ef01a717767 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -1035,6 +1035,10 @@ void clear_keyboard_but_mods(void) { * FIXME: Needs documentation. */ void clear_keyboard_but_mods_and_keys() { +#ifdef EXTRAKEY_ENABLE + host_system_send(0); + host_consumer_send(0); +#endif clear_weak_mods(); clear_macro_mods(); send_keyboard_report(); @@ -1042,10 +1046,6 @@ void clear_keyboard_but_mods_and_keys() { mousekey_clear(); mousekey_send(); #endif -#ifdef EXTRAKEY_ENABLE - host_system_send(0); - host_consumer_send(0); -#endif } /** \brief Utilities for actions. (FIXME: Needs better description) From 448cc1acd5f107f9679a48c605861654523432e7 Mon Sep 17 00:00:00 2001 From: Zach White Date: Mon, 8 Feb 2021 03:03:08 -0800 Subject: [PATCH 118/145] remove deprecated qmk json-keymap (#11823) --- lib/python/qmk/cli/__init__.py | 1 - lib/python/qmk/cli/json/__init__.py | 5 ----- lib/python/qmk/cli/json/keymap.py | 16 ---------------- 3 files changed, 22 deletions(-) delete mode 100644 lib/python/qmk/cli/json/__init__.py delete mode 100755 lib/python/qmk/cli/json/keymap.py diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 372c40921a8..1732287da0d 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -19,7 +19,6 @@ from . import flash from . import generate from . import hello from . import info -from . import json from . import json2c from . import lint from . import list diff --git a/lib/python/qmk/cli/json/__init__.py b/lib/python/qmk/cli/json/__init__.py deleted file mode 100644 index f4ebfc45b4a..00000000000 --- a/lib/python/qmk/cli/json/__init__.py +++ /dev/null @@ -1,5 +0,0 @@ -"""QMK CLI JSON Subcommands - -We list each subcommand here explicitly because all the reliable ways of searching for modules are slow and delay startup. -""" -from . import keymap diff --git a/lib/python/qmk/cli/json/keymap.py b/lib/python/qmk/cli/json/keymap.py deleted file mode 100755 index 2af9faaa72c..00000000000 --- a/lib/python/qmk/cli/json/keymap.py +++ /dev/null @@ -1,16 +0,0 @@ -"""Generate a keymap.c from a configurator export. -""" -from pathlib import Path - -from milc import cli - - -@cli.argument('-o', '--output', arg_only=True, type=Path, help='File to write to') -@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages") -@cli.argument('filename', arg_only=True, help='Configurator JSON file') -@cli.subcommand('Creates a keymap.c from a QMK Configurator export.', hidden=True) -def json_keymap(cli): - """Renamed to `qmk json2c`. - """ - cli.log.error('This command has been renamed to `qmk json2c`.') - return False From 7161d650705afb86b0874d95d72d15cf134f4148 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 9 Feb 2021 09:49:05 -0800 Subject: [PATCH 119/145] Remove FAUXCLICKY feature (deprecated) (#11829) --- common_features.mk | 5 - docs/feature_audio.md | 6 -- docs/getting_started_make_guide.md | 4 - docs/ja/feature_audio.md | 6 -- docs/ja/getting_started_make_guide.md | 4 - keyboards/1upkeyboards/1up60hse/rules.mk | 1 - keyboards/1upkeyboards/super16/rules.mk | 1 - keyboards/40percentclub/25/rules.mk | 1 - keyboards/40percentclub/4pack/rules.mk | 1 - keyboards/40percentclub/4x4/rules.mk | 1 - keyboards/40percentclub/5x5/rules.mk | 1 - keyboards/40percentclub/6lit/rules.mk | 1 - keyboards/40percentclub/foobar/rules.mk | 1 - .../gherkin/keymaps/stevexyz/rules.mk | 3 +- keyboards/40percentclub/half_n_half/rules.mk | 1 - keyboards/40percentclub/i75/rules.mk | 1 - keyboards/40percentclub/nein/rules.mk | 1 - keyboards/40percentclub/nori/rules.mk | 1 - keyboards/40percentclub/ut47/rules.mk | 1 - keyboards/4pplet/aekiso60/rev_a/rules.mk | 3 +- keyboards/4pplet/steezy60/rev_a/rules.mk | 3 +- keyboards/4pplet/waffling60/rev_a/rules.mk | 3 +- keyboards/abacus/rules.mk | 1 - keyboards/absinthe/rules.mk | 1 - keyboards/abstract/ellipse/rev1/rules.mk | 1 - keyboards/acheron/austin/rules.mk | 2 - keyboards/acheron/elongate/rules.mk | 2 - keyboards/acheron/keebspcb/rules.mk | 2 - keyboards/acheron/shark/rules.mk | 3 +- keyboards/aeboards/aegis/rules.mk | 2 - keyboards/aeboards/ext65/rev1/rules.mk | 1 - keyboards/ai03/equinox/rev0/rules.mk | 1 - keyboards/ai03/equinox/rev1/rules.mk | 1 - keyboards/ai03/lunar/rules.mk | 1 - keyboards/ai03/orbit/rules.mk | 1 - keyboards/ai03/orbit_x/rules.mk | 3 +- keyboards/ai03/polaris/rules.mk | 1 - keyboards/ai03/quasar/rules.mk | 1 - keyboards/akb/eb46/rules.mk | 1 - keyboards/akb/raine/rules.mk | 1 - keyboards/al1/rules.mk | 2 - keyboards/alf/dc60/rules.mk | 1 - keyboards/alf/x11/rules.mk | 1 - keyboards/allison/rules.mk | 1 - keyboards/allison_numpad/rules.mk | 1 - keyboards/amj96/rules.mk | 2 - keyboards/amjkeyboard/amj66/rules.mk | 1 - keyboards/angel17/alpha/rules.mk | 1 - keyboards/angel17/rev1/rules.mk | 1 - keyboards/angel17/rules.mk | 1 - keyboards/angel64/rules.mk | 1 - keyboards/aos/tkl/rules.mk | 1 - keyboards/aplyard/aplx6/rev1/rules.mk | 1 - keyboards/arabica37/rev1/rules.mk | 1 - keyboards/arisu/rules.mk | 1 - keyboards/ash1800/rules.mk | 1 - keyboards/ashpil/modelm_usbc/rules.mk | 1 - keyboards/atreus/rules.mk | 1 - keyboards/atxkb/1894/rules.mk | 1 - keyboards/aves65/rules.mk | 1 - keyboards/baguette/rules.mk | 1 - keyboards/bakeneko80/rules.mk | 1 - keyboards/bat43/rules.mk | 1 - keyboards/bigseries/1key/rules.mk | 1 - keyboards/bigseries/2key/rules.mk | 1 - keyboards/bigseries/3key/rules.mk | 1 - keyboards/bigseries/4key/rules.mk | 1 - keyboards/blockey/rules.mk | 1 - keyboards/bm16a/rules.mk | 1 - keyboards/bm43a/rules.mk | 1 - keyboards/bm60rgb/rules.mk | 1 - keyboards/boardsource/4x12/rules.mk | 2 +- keyboards/boardsource/5x12/rules.mk | 1 - keyboards/botanicalkeyboards/fm2u/rules.mk | 1 - .../frosty_flake/keymaps/QFR_JM/rules.mk | 2 +- keyboards/bpiphany/frosty_flake/rules.mk | 1 - keyboards/bpiphany/sixshooter/rules.mk | 1 - keyboards/bpiphany/tiger_lily/rules.mk | 1 - keyboards/bpiphany/unloved_bastard/rules.mk | 1 - keyboards/bthlabs/geekpad/rules.mk | 1 - keyboards/business_card/alpha/rules.mk | 1 - keyboards/business_card/beta/rules.mk | 1 - keyboards/business_card/rules.mk | 1 - keyboards/cannonkeys/obliterated75/rules.mk | 3 +- keyboards/chidori/rules.mk | 1 - keyboards/chimera_ortho_plus/rules.mk | 1 - keyboards/choc_taro/rules.mk | 1 - keyboards/ckeys/handwire_101/rules.mk | 1 - keyboards/ckeys/nakey/rules.mk | 1 - keyboards/ckeys/obelus/rules.mk | 1 - keyboards/ckeys/washington/rules.mk | 1 - keyboards/clawsome/bookerboard/rules.mk | 1 - keyboards/clawsome/coupe/rules.mk | 1 - keyboards/clawsome/gamebuddy/rules.mk | 1 - keyboards/clawsome/sedan/rules.mk | 1 - keyboards/clawsome/sidekick/rules.mk | 1 - keyboards/cocoa40/rules.mk | 1 - keyboards/converter/modelm101/rules.mk | 1 - .../converter/numeric_keypad_IIe/rules.mk | 1 - keyboards/converter/usb_usb/ble/rules.mk | 1 - .../copenhagen_click/click_pad_v1/rules.mk | 1 - keyboards/coseyfannitutti/discipad/rules.mk | 1 - keyboards/coseyfannitutti/discipline/rules.mk | 1 - keyboards/coseyfannitutti/mullet/rules.mk | 1 - keyboards/coseyfannitutti/mulletpad/rules.mk | 1 - keyboards/coseyfannitutti/mysterium/rules.mk | 1 - keyboards/coseyfannitutti/romeo/rules.mk | 1 - keyboards/cospad/rules.mk | 1 - keyboards/cu24/rules.mk | 1 - keyboards/cu80/rules.mk | 1 - keyboards/cutie_club/wraith/rules.mk | 1 - keyboards/daisy/rules.mk | 1 - keyboards/dc01/arrow/rules.mk | 1 - keyboards/dc01/left/rules.mk | 2 +- keyboards/dc01/numpad/rules.mk | 1 - keyboards/dc01/right/rules.mk | 1 - keyboards/deltasplit75/rules.mk | 1 - keyboards/dm9records/plaid/rules.mk | 1 - keyboards/dm9records/tartan/rules.mk | 1 - keyboards/dmqdesign/spin/rules.mk | 1 - keyboards/donutcables/scrabblepad/rules.mk | 1 - keyboards/doppelganger/rules.mk | 1 - keyboards/doro67/multi/rules.mk | 1 - keyboards/doro67/regular/rules.mk | 1 - keyboards/doro67/rgb/rules.mk | 1 - keyboards/dozen0/rules.mk | 1 - keyboards/dp60/rules.mk | 1 - keyboards/duck/eagle_viper/v2/rules.mk | 1 - keyboards/duck/jetfire/rules.mk | 1 - keyboards/duck/lightsaver/rules.mk | 1 - keyboards/duck/octagon/v1/rules.mk | 1 - keyboards/duck/octagon/v2/rules.mk | 1 - keyboards/duck/orion/v3/rules.mk | 1 - keyboards/duck/tcv3/rules.mk | 1 - keyboards/dumbpad/rules.mk | 1 - keyboards/dztech/dz60rgb/v1/rules.mk | 1 - keyboards/dztech/dz60rgb/v2/rules.mk | 1 - keyboards/dztech/dz60rgb_ansi/v1/rules.mk | 1 - keyboards/dztech/dz60rgb_ansi/v2/rules.mk | 1 - keyboards/dztech/dz60rgb_wkl/v1/rules.mk | 1 - keyboards/dztech/dz60rgb_wkl/v2/rules.mk | 1 - keyboards/dztech/dz65rgb/v1/rules.mk | 1 - keyboards/dztech/dz65rgb/v2/rules.mk | 1 - keyboards/eniigmakeyboards/ek87/rules.mk | 1 - keyboards/ep/40/rules.mk | 1 - keyboards/ep/96/rules.mk | 1 - keyboards/ep/comsn/hs68/rules.mk | 1 - keyboards/ep/comsn/mollydooker/rules.mk | 1 - keyboards/ep/comsn/tf_longeboye/rules.mk | 1 - keyboards/ergo42/rules.mk | 1 - .../ergodox_ez/keymaps/hacker_dvorak/rules.mk | 1 - keyboards/ergosaurus/rules.mk | 1 - .../ericrlau/numdiscipline/rev1/rules.mk | 1 - keyboards/evyd13/eon40/rules.mk | 1 - keyboards/evyd13/eon65/rules.mk | 1 - keyboards/evyd13/eon75/rules.mk | 1 - keyboards/evyd13/eon87/rules.mk | 1 - keyboards/evyd13/eon95/rules.mk | 1 - keyboards/evyd13/minitomic/rules.mk | 1 - keyboards/evyd13/mx5160/rules.mk | 1 - keyboards/evyd13/nt660/rules.mk | 1 - keyboards/evyd13/omrontkl/rules.mk | 1 - keyboards/evyd13/ta65/rules.mk | 1 - keyboards/evyd13/wasdat/rules.mk | 1 - keyboards/evyd13/wasdat_code/rules.mk | 1 - keyboards/exclusive/e6_rgb/rules.mk | 1 - keyboards/exclusive/e6v2/le_bmc/rules.mk | 1 - keyboards/exclusive/e6v2/oe_bmc/rules.mk | 1 - keyboards/exclusive/e7v1se/rules.mk | 1 - keyboards/fallacy/rules.mk | 1 - keyboards/felix/rules.mk | 1 - .../flehrad/bigswitch/keymaps/wanleg/rules.mk | 1 - keyboards/flehrad/downbubble/rules.mk | 1 - keyboards/fleuron/rules.mk | 1 - keyboards/fluorite/rules.mk | 1 - keyboards/flx/lodestone/rules.mk | 1 - keyboards/flx/virgo/rules.mk | 1 - keyboards/fortitude60/rules.mk | 1 - keyboards/foxlab/key65/hotswap/rules.mk | 1 - keyboards/foxlab/key65/universal/rules.mk | 1 - keyboards/foxlab/leaf60/hotswap/rules.mk | 1 - keyboards/foxlab/leaf60/universal/rules.mk | 1 - keyboards/funky40/rules.mk | 1 - keyboards/gami_studio/lex60/rules.mk | 1 - keyboards/geekboards/tester/rules.mk | 1 - keyboards/ghs/rar/rules.mk | 1 - keyboards/gingham/rules.mk | 1 - keyboards/gon/nerd60/keymaps/mauin/rules.mk | 1 - keyboards/gon/nerd60/rules.mk | 1 - .../gon/nerdtkl/keymaps/gam3cat/rules.mk | 1 - keyboards/gon/nerdtkl/rules.mk | 1 - keyboards/gowla/rules.mk | 1 - keyboards/gray_studio/cod67/rules.mk | 1 - keyboards/gray_studio/space65/rules.mk | 1 - .../gray_studio/think65/hotswap/rules.mk | 1 - keyboards/gray_studio/think65/solder/rules.mk | 1 - keyboards/grid600/press/rules.mk | 1 - keyboards/halberd/rules.mk | 1 - .../handwired/108key_trackpoint/rules.mk | 1 - keyboards/handwired/412_64/rules.mk | 1 - keyboards/handwired/42/rules.mk | 1 - keyboards/handwired/aplx2/rules.mk | 1 - keyboards/handwired/aranck/rules.mk | 3 +- keyboards/handwired/bdn9_ble/rules.mk | 1 - .../handwired/boss566y/redragon_vara/rules.mk | 1 - keyboards/handwired/cans12er/rules.mk | 1 - keyboards/handwired/chiron/rules.mk | 1 - keyboards/handwired/co60/rev1/rules.mk | 1 - keyboards/handwired/colorlice/rules.mk | 1 - keyboards/handwired/dactyl_left/rules.mk | 1 - keyboards/handwired/fc200rt_qmk/rules.mk | 1 - keyboards/handwired/floorboard/rules.mk | 2 +- keyboards/handwired/fruity60/rules.mk | 1 - keyboards/handwired/hacked_motospeed/rules.mk | 1 - keyboards/handwired/heisenberg/rules.mk | 1 - keyboards/handwired/hnah40/rules.mk | 1 - keyboards/handwired/hnah40rgb/rules.mk | 3 +- keyboards/handwired/ibm122m/rules.mk | 1 - keyboards/handwired/jn68m/rules.mk | 1 - .../handwired/jtallbean/split_65/rules.mk | 1 - keyboards/handwired/juliet/rules.mk | 1 - keyboards/handwired/k8split/rules.mk | 1 - keyboards/handwired/kbod/rules.mk | 1 - .../handwired/mechboards_micropad/rules.mk | 1 - keyboards/handwired/minorca/rules.mk | 1 - keyboards/handwired/novem/rules.mk | 1 - keyboards/handwired/onekey/rules.mk | 1 - keyboards/handwired/owlet60/rules.mk | 1 - keyboards/handwired/p1800fl/rules.mk | 1 - keyboards/handwired/p65rgb/rules.mk | 1 - .../handwired/postageboard/mini/rules.mk | 1 - keyboards/handwired/postageboard/r1/rules.mk | 1 - keyboards/handwired/prime_exl/rules.mk | 1 - keyboards/handwired/prime_exl_plus/rules.mk | 1 - .../promethium/keymaps/default/rules.mk | 5 +- .../promethium/keymaps/priyadi/rules.mk | 5 +- keyboards/handwired/sick68/rules.mk | 1 - keyboards/handwired/slash/rules.mk | 1 - keyboards/handwired/sticc14/rules.mk | 1 - keyboards/handwired/swiftrax/cowfish/rules.mk | 1 - keyboards/handwired/symmetry60/rules.mk | 1 - keyboards/handwired/tennie/rules.mk | 1 - keyboards/handwired/twadlee/tp69/rules.mk | 1 - keyboards/handwired/unk/rules.mk | 1 - keyboards/handwired/videowriter/rules.mk | 1 - keyboards/handwired/wulkan/rules.mk | 1 - keyboards/hecomi/alpha/rules.mk | 1 - keyboards/hecomi/rules.mk | 1 - keyboards/hid_liber/rules.mk | 1 - keyboards/hineybush/h10/rules.mk | 1 - keyboards/hineybush/h60/rules.mk | 2 +- keyboards/hineybush/h75_singa/rules.mk | 1 - .../hineybush/h87a/keymaps/gam3cat/rules.mk | 3 +- keyboards/hineybush/h87a/rules.mk | 1 - keyboards/hineybush/h88/rules.mk | 1 - keyboards/hineybush/hbcp/rules.mk | 1 - keyboards/hineybush/hineyg80/rules.mk | 1 - keyboards/hineybush/physix/rules.mk | 1 - keyboards/hineybush/sm68/rules.mk | 1 - keyboards/hs60/v1/rules.mk | 1 - keyboards/hub16/rules.mk | 1 - keyboards/id80/rules.mk | 1 - keyboards/idobo/rules.mk | 1 - keyboards/illuminati/is0/rules.mk | 1 - keyboards/jae/j01/rules.mk | 1 - keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk | 6 +- keyboards/jisplit89/rules.mk | 1 - keyboards/jj40/keymaps/stevexyz/rules.mk | 1 - keyboards/jj40/rules.mk | 1 - keyboards/jj4x4/rules.mk | 1 - keyboards/jnao/rules.mk | 1 - keyboards/just60/rules.mk | 1 - keyboards/kagamidget/rules.mk | 1 - keyboards/kbdclack/kaishi65/rules.mk | 1 - keyboards/kbdfans/kbd19x/rules.mk | 1 - keyboards/kbdfans/kbd4x/rules.mk | 1 - keyboards/kbdfans/kbd66/rules.mk | 1 - keyboards/kbdfans/kbd67/hotswap/rules.mk | 1 - .../kbdfans/kbd67/mkii_soldered/rules.mk | 1 - keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk | 1 - keyboards/kbdfans/kbd67/rev1/rules.mk | 1 - .../kbd67/rev2/keymaps/tucznak/rules.mk | 3 +- keyboards/kbdfans/kbd67/rev2/rules.mk | 1 - keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk | 2 - keyboards/kbdfans/kbd6x/rules.mk | 1 - keyboards/kbdfans/kbd8x_mk2/rules.mk | 1 - keyboards/kbdfans/kbdmini/rules.mk | 1 - keyboards/kbdfans/kbdpad_mk2/rules.mk | 1 - keyboards/kbdfans/maja/rules.mk | 1 - keyboards/kc60se/rules.mk | 1 - keyboards/keebio/bdn9/rev1/rules.mk | 3 +- keyboards/keebio/bdn9/rev2/rules.mk | 1 - keyboards/keebio/choconum/rules.mk | 1 - keyboards/keebio/ergodicity/rules.mk | 1 - keyboards/keebio/tukey/rules.mk | 1 - keyboards/keebzdotnet/wazowski/rules.mk | 1 - keyboards/keyhive/maypad/rules.mk | 1 - keyboards/kingly_keys/romac_plus/rules.mk | 1 - keyboards/kira75/rules.mk | 1 - keyboards/kmac/rules.mk | 1 - keyboards/kmini/rules.mk | 1 - keyboards/knops/mini/rules.mk | 3 +- keyboards/kudox/rules.mk | 1 - keyboards/kudox_game/rules.mk | 1 - keyboards/kv/revt/rules.mk | 1 - keyboards/kyria/keymaps/drashna/rules.mk | 2 - keyboards/kyria/rules.mk | 1 - keyboards/lattice60/rules.mk | 1 - keyboards/lazydesigners/the30/rules.mk | 1 - .../keymaps/bbaserdem_right/rules.mk | 2 - keyboards/lfkeyboards/lfkpad/rules.mk | 1 - keyboards/m10a/keymaps/gam3cat/rules.mk | 3 +- .../massdrop/alt/keymaps/reywood/rules.mk | 1 - keyboards/massdrop/alt/rules.mk | 1 - keyboards/massdrop/ctrl/rules.mk | 1 - keyboards/maxipad/rules.mk | 1 - keyboards/mc_76k/rules.mk | 1 - keyboards/mechkeys/mk60/rules.mk | 1 - keyboards/mechlovin/adelais/rules.mk | 3 +- keyboards/mechlovin/hannah910/rev1/rules.mk | 1 - keyboards/mechlovin/infinity87/rules.mk | 1 - keyboards/mechlovin/infinityce/rules.mk | 1 - keyboards/mechlovin/pisces/rules.mk | 1 - keyboards/meira/rules.mk | 3 +- keyboards/meishi/rules.mk | 1 - keyboards/meishi2/rules.mk | 1 - keyboards/meme/rules.mk | 1 - keyboards/meson/rules.mk | 1 - keyboards/miller/gm862/rules.mk | 1 - keyboards/miniaxe/rules.mk | 1 - keyboards/minidox/rules.mk | 1 - keyboards/mint60/rules.mk | 3 +- keyboards/mitosis/keymaps/datagrok/rules.mk | 1 - keyboards/montsinger/rebound/rev1/rules.mk | 3 +- keyboards/montsinger/rebound/rev2/rules.mk | 3 +- keyboards/montsinger/rebound/rev3/rules.mk | 2 - keyboards/montsinger/rebound/rev4/rules.mk | 1 - keyboards/montsinger/rewind/rules.mk | 1 - keyboards/moon/rules.mk | 1 - keyboards/mountainblocks/mb17/rules.mk | 1 - keyboards/murcielago/rev1/rules.mk | 3 +- keyboards/mxss/rules.mk | 1 - keyboards/namecard2x4/rules.mk | 1 - keyboards/navi10/rev0/rules.mk | 3 +- keyboards/navi10/rev2/rules.mk | 3 +- keyboards/navi10/rev3/rules.mk | 3 +- keyboards/nek_type_a/rules.mk | 1 - keyboards/nightly_boards/alter/rev1/rules.mk | 1 - keyboards/nightmare/rules.mk | 1 - keyboards/nomu30/rev1/rules.mk | 1 - keyboards/nomu30/rev2/rules.mk | 1 - keyboards/noxary/220/rules.mk | 1 - keyboards/noxary/260/rules.mk | 1 - keyboards/noxary/268/rules.mk | 1 - keyboards/noxary/268_2/rules.mk | 1 - keyboards/noxary/280/rules.mk | 1 - keyboards/noxary/x268/rules.mk | 1 - keyboards/nullbitsco/nibble/rules.mk | 3 +- keyboards/oddball/rules.mk | 1 - keyboards/ogre/ergo_single/rules.mk | 1 - keyboards/ogre/ergo_split/rules.mk | 1 - keyboards/ortho5by12/rules.mk | 1 - keyboards/otaku_split/rev0/rules.mk | 1 - keyboards/otaku_split/rev1/rules.mk | 1 - keyboards/pabile/p18/rules.mk | 1 - keyboards/pabile/p40/rules.mk | 1 - keyboards/palette1202/rules.mk | 1 - keyboards/panc40/rules.mk | 1 - keyboards/pdxkbc/rules.mk | 1 - keyboards/percent/booster/rules.mk | 1 - keyboards/pico/rules.mk | 1 - keyboards/planck/keymaps/priyadi/rules.mk | 6 +- keyboards/primekb/prime_l/rules.mk | 3 +- keyboards/primekb/prime_m/rules.mk | 1 - keyboards/primekb/prime_o/rules.mk | 1 - keyboards/projectkb/alice/rev1/rules.mk | 1 - keyboards/projectkb/alice/rev2/rules.mk | 1 - keyboards/quad_h/lb75/rules.mk | 2 - keyboards/quantrik/kyuu/rules.mk | 1 - keyboards/rabbit/rabbit68/rules.mk | 1 - keyboards/rart/rart67/rules.mk | 1 - keyboards/rart/rart75/rules.mk | 2 - keyboards/redox/rules.mk | 3 +- keyboards/redscarf_i/rules.mk | 1 - keyboards/redscarf_iiplus/verb/rules.mk | 1 - keyboards/redscarf_iiplus/verc/rules.mk | 1 - keyboards/redscarf_iiplus/verd/rules.mk | 1 - keyboards/retro_75/rules.mk | 1 - keyboards/reversestudio/decadepad/rules.mk | 5 +- keyboards/reviung34/rules.mk | 1 - keyboards/reviung39/rules.mk | 1 - keyboards/reviung41/rules.mk | 1 - keyboards/rgbkb/zygomorph/rules.mk | 1 - keyboards/rotr/rules.mk | 1 - keyboards/runner3680/rules.mk | 1 - keyboards/s7_elephant/rev2/rules.mk | 1 - keyboards/scarletbandana/rules.mk | 1 - keyboards/sck/m0116b/rules.mk | 1 - keyboards/sck/neiso/rules.mk | 1 - keyboards/sck/osa/rules.mk | 1 - keyboards/scythe/rules.mk | 2 - keyboards/sentraq/number_pad/rules.mk | 1 - keyboards/shambles/rules.mk | 1 - keyboards/shiro/rules.mk | 1 - keyboards/sidderskb/majbritt/rules.mk | 1 - keyboards/silverbullet44/rules.mk | 1 - keyboards/smk60/rules.mk | 1 - keyboards/snampad/rules.mk | 1 - keyboards/spacetime/rules.mk | 1 - keyboards/splitreus62/rules.mk | 1 - keyboards/squiggle/rev1/rules.mk | 1 - keyboards/standaside/rules.mk | 1 - keyboards/staryu/rules.mk | 1 - keyboards/suihankey/rules.mk | 1 - keyboards/switchplate/southpaw_65/rules.mk | 1 - .../switchplate/southpaw_fullsize/rules.mk | 1 - keyboards/tada68/rules.mk | 1 - keyboards/tg4x/rules.mk | 1 - keyboards/the_royal/liminal/rules.mk | 1 - keyboards/thedogkeyboard/rules.mk | 1 - keyboards/tkc/osav2/rules.mk | 1 - keyboards/tmo50/rules.mk | 1 - keyboards/tr60w/rules.mk | 1 - keyboards/treadstone48/rules.mk | 1 - keyboards/treasure/type9/rules.mk | 1 - keyboards/ua62/rules.mk | 1 - keyboards/uranuma/rules.mk | 1 - keyboards/ut472/keymaps/tucznak/rules.mk | 1 - keyboards/ut472/rules.mk | 1 - keyboards/v60_type_r/rules.mk | 1 - keyboards/wallaby/rules.mk | 1 - keyboards/westfoxtrot/cyclops/rules.mk | 1 - keyboards/westfoxtrot/cypher/rev1/rules.mk | 1 - keyboards/westfoxtrot/cypher/rev5/rules.mk | 1 - keyboards/wheatfield/blocked65/rules.mk | 1 - .../wilba_tech/rama_works_m10_b/rules.mk | 1 - .../wilba_tech/rama_works_u80_a/rules.mk | 1 - keyboards/wilba_tech/wt60_a/rules.mk | 1 - keyboards/wilba_tech/wt60_d/rules.mk | 1 - keyboards/wilba_tech/wt60_xt/rules.mk | 1 - keyboards/wilba_tech/wt65_a/rules.mk | 1 - keyboards/wilba_tech/wt65_b/rules.mk | 1 - keyboards/wilba_tech/wt69_a/rules.mk | 1 - keyboards/wilba_tech/wt75_a/rules.mk | 1 - keyboards/wilba_tech/wt75_b/rules.mk | 1 - keyboards/wilba_tech/wt75_c/rules.mk | 1 - keyboards/wilba_tech/wt80_a/rules.mk | 1 - keyboards/wilba_tech/wt80_bc/rules.mk | 1 - keyboards/wilba_tech/wt8_a/rules.mk | 1 - keyboards/wolfmarkclub/wm1/rules.mk | 1 - keyboards/wsk/gothic50/rules.mk | 1 - keyboards/wsk/gothic70/rules.mk | 1 - keyboards/wsk/tkl30/rules.mk | 1 - keyboards/x16/rules.mk | 1 - keyboards/xbows/knight/rules.mk | 1 - keyboards/xd002/rules.mk | 1 - keyboards/xd68/rules.mk | 1 - keyboards/xd84/rules.mk | 1 - keyboards/xd87/rules.mk | 1 - keyboards/xd96/rules.mk | 1 - keyboards/xelus/dawn60/rev1/rules.mk | 3 +- keyboards/xelus/snap96/rules.mk | 2 - keyboards/yatara/drink_me/rules.mk | 1 - keyboards/yd60mq/rules.mk | 1 - keyboards/yd68/rules.mk | 1 - keyboards/ymdk/ymd09/rules.mk | 1 - keyboards/yncognito/batpad/rules.mk | 1 - keyboards/yurei/rules.mk | 1 - keyboards/yushakobo/quick7/rules.mk | 1 - keyboards/zfrontier/big_switch/rules.mk | 1 - keyboards/zvecr/split_blackpill/rules.mk | 1 - keyboards/zvecr/zv48/rules.mk | 1 - quantum/fauxclicky.c | 59 ----------- quantum/fauxclicky.h | 97 ------------------- quantum/quantum.c | 15 --- quantum/quantum_keycodes.h | 10 +- show_options.mk | 1 - tmk_core/common/action.c | 14 --- tmk_core/common/keyboard.c | 6 -- users/bbaserdem/rules.mk | 3 +- users/bcat/rules.mk | 1 - users/drashna/readme_keycodes.md | 2 +- users/romus/rules.mk | 3 +- 483 files changed, 48 insertions(+), 750 deletions(-) delete mode 100644 quantum/fauxclicky.c delete mode 100644 quantum/fauxclicky.h diff --git a/common_features.mk b/common_features.mk index 5d3a200dc67..ecb4f5576bf 100644 --- a/common_features.mk +++ b/common_features.mk @@ -80,11 +80,6 @@ ifeq ($(strip $(VIRTSER_ENABLE)), yes) OPT_DEFS += -DVIRTSER_ENABLE endif -ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes) - OPT_DEFS += -DFAUXCLICKY_ENABLE - SRC += $(QUANTUM_DIR)/fauxclicky.c -endif - ifeq ($(strip $(MOUSEKEY_ENABLE)), yes) OPT_DEFS += -DMOUSEKEY_ENABLE OPT_DEFS += -DMOUSE_ENABLE diff --git a/docs/feature_audio.md b/docs/feature_audio.md index 5132dfe9719..68ba4477a52 100644 --- a/docs/feature_audio.md +++ b/docs/feature_audio.md @@ -215,12 +215,6 @@ This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to s AU_OFF, AU_TOG, - #ifdef FAUXCLICKY_ENABLE - FC_ON, - FC_OFF, - FC_TOG, - #endif - // Music mode on/off/toggle MU_ON, MU_OFF, diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index ad63a1c2ec6..7198576e3ad 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -121,10 +121,6 @@ For further details, as well as limitations, see the [Unicode page](feature_unic This allows you output audio on the C6 pin (needs abstracting). See the [audio page](feature_audio.md) for more information. -`FAUXCLICKY_ENABLE` - -Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`. - `VARIABLE_TRACE` Use this to debug changes to variable values, see the [tracing variables](unit_testing.md#tracing-variables) section of the Unit Testing page for more information. diff --git a/docs/ja/feature_audio.md b/docs/ja/feature_audio.md index 2d13c3f7ccc..ca7820e3c48 100644 --- a/docs/ja/feature_audio.md +++ b/docs/ja/feature_audio.md @@ -220,12 +220,6 @@ const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12( AU_OFF, AU_TOG, - #ifdef FAUXCLICKY_ENABLE - FC_ON, - FC_OFF, - FC_TOG, - #endif - // Music mode on/off/toggle MU_ON, MU_OFF, diff --git a/docs/ja/getting_started_make_guide.md b/docs/ja/getting_started_make_guide.md index 08005877e73..45284a0b9f6 100644 --- a/docs/ja/getting_started_make_guide.md +++ b/docs/ja/getting_started_make_guide.md @@ -110,10 +110,6 @@ make コマンド自体にもいくつかの追加オプションがあります C6 ピン(抽象化が必要)でオーディオ出力できます。詳細は[オーディオページ](ja/feature_audio.md)を見てください。 -`FAUXCLICKY_ENABLE` - -クリック音のあるスイッチをエミュレートするためにブザーを使います。Cherry社製の青軸スイッチの安っぽい模倣です。デフォルトでは、`AUDIO_ENABLE` と同じように C6 ピンを使います。 - `VARIABLE_TRACE` これを使って変数の値の変更をデバッグします。詳細についてはユニットテストのページの[変数のトレース](ja/unit_testing.md#tracing-variables)のセクションを見てください。 diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk index 3dc6c04c8a1..37c18690ce4 100644 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ b/keyboards/1upkeyboards/1up60hse/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto LAYOUTS = 60_ansi diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index 90e7e42ad04..209fdeb1929 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -31,6 +31,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 numpad_4x4 diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk index 3c263d5bf61..d0180395715 100644 --- a/keyboards/40percentclub/25/rules.mk +++ b/keyboards/40percentclub/25/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/4pack/rules.mk b/keyboards/40percentclub/4pack/rules.mk index 94ad9cb6fd1..a945161390d 100644 --- a/keyboards/40percentclub/4pack/rules.mk +++ b/keyboards/40percentclub/4pack/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/40percentclub/4x4/rules.mk b/keyboards/40percentclub/4x4/rules.mk index e092372d7d1..91b609103e2 100644 --- a/keyboards/40percentclub/4x4/rules.mk +++ b/keyboards/40percentclub/4x4/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 ortho_4x16 diff --git a/keyboards/40percentclub/5x5/rules.mk b/keyboards/40percentclub/5x5/rules.mk index e0236aa26bf..ae36f660e94 100644 --- a/keyboards/40percentclub/5x5/rules.mk +++ b/keyboards/40percentclub/5x5/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x5 ortho_5x10 ortho_5x15 diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk index f1b426d062f..8d32d2c3fb7 100644 --- a/keyboards/40percentclub/6lit/rules.mk +++ b/keyboards/40percentclub/6lit/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk index 3c80be1a933..7516c9bdd84 100644 --- a/keyboards/40percentclub/foobar/rules.mk +++ b/keyboards/40percentclub/foobar/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk b/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk index a36a4fdad22..8c48f58507e 100644 --- a/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk +++ b/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk @@ -6,11 +6,10 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches TAP_DANCE_ENABLE = no SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend (it uses the same timer as BACKLIGHT_ENABLE) diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk index 23058393bb0..bd2b179d8a6 100644 --- a/keyboards/40percentclub/half_n_half/rules.mk +++ b/keyboards/40percentclub/half_n_half/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk index 98dc54b75a8..ba535b1c6b6 100644 --- a/keyboards/40percentclub/i75/rules.mk +++ b/keyboards/40percentclub/i75/rules.mk @@ -16,7 +16,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x15 DEFAULT_FOLDER = 40percentclub/i75/promicro diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk index eed880ead52..67b7f813ec4 100644 --- a/keyboards/40percentclub/nein/rules.mk +++ b/keyboards/40percentclub/nein/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk index df09b0bdee8..1b9766581a0 100644 --- a/keyboards/40percentclub/nori/rules.mk +++ b/keyboards/40percentclub/nori/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 ortho_4x8 ortho_4x12 diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 9d21750b446..50868429aca 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/4pplet/aekiso60/rev_a/rules.mk b/keyboards/4pplet/aekiso60/rev_a/rules.mk index 494e07bc0ca..b98fb7e33fc 100644 --- a/keyboards/4pplet/aekiso60/rev_a/rules.mk +++ b/keyboards/4pplet/aekiso60/rev_a/rules.mk @@ -22,10 +22,9 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/steezy60/rev_a/rules.mk b/keyboards/4pplet/steezy60/rev_a/rules.mk index 494e07bc0ca..b98fb7e33fc 100644 --- a/keyboards/4pplet/steezy60/rev_a/rules.mk +++ b/keyboards/4pplet/steezy60/rev_a/rules.mk @@ -22,10 +22,9 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/waffling60/rev_a/rules.mk b/keyboards/4pplet/waffling60/rev_a/rules.mk index 494e07bc0ca..b98fb7e33fc 100644 --- a/keyboards/4pplet/waffling60/rev_a/rules.mk +++ b/keyboards/4pplet/waffling60/rev_a/rules.mk @@ -22,10 +22,9 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover +NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode diff --git a/keyboards/abacus/rules.mk b/keyboards/abacus/rules.mk index 11d4f99535b..6d6a2f19a68 100644 --- a/keyboards/abacus/rules.mk +++ b/keyboards/abacus/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes DIP_SWITCH_ENABLE = yes LTO_ENABLE = yes diff --git a/keyboards/absinthe/rules.mk b/keyboards/absinthe/rules.mk index 8f534909dfd..78bf2bf1bf9 100644 --- a/keyboards/absinthe/rules.mk +++ b/keyboards/absinthe/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk index 7ee34b10712..cd55ecdbe7f 100644 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ b/keyboards/abstract/ellipse/rev1/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable support for rotary encoders diff --git a/keyboards/acheron/austin/rules.mk b/keyboards/acheron/austin/rules.mk index a627eed8a02..6796ab14052 100644 --- a/keyboards/acheron/austin/rules.mk +++ b/keyboards/acheron/austin/rules.mk @@ -18,7 +18,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/elongate/rules.mk b/keyboards/acheron/elongate/rules.mk index c0e8f35ac5e..6d5f0fb527d 100644 --- a/keyboards/acheron/elongate/rules.mk +++ b/keyboards/acheron/elongate/rules.mk @@ -28,6 +28,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - LTO_ENABLE = yes diff --git a/keyboards/acheron/keebspcb/rules.mk b/keyboards/acheron/keebspcb/rules.mk index 3912bcbc7df..b08ad400cdd 100644 --- a/keyboards/acheron/keebspcb/rules.mk +++ b/keyboards/acheron/keebspcb/rules.mk @@ -18,8 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 9c0eb02816b..04f2a7b944b 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -16,11 +16,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x12 diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index cb9ad1acf19..8b7a0c7f0be 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -28,5 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - diff --git a/keyboards/aeboards/ext65/rev1/rules.mk b/keyboards/aeboards/ext65/rev1/rules.mk index 6e5ad12f8dd..05abcb68fb9 100644 --- a/keyboards/aeboards/ext65/rev1/rules.mk +++ b/keyboards/aeboards/ext65/rev1/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ai03/equinox/rev0/rules.mk b/keyboards/ai03/equinox/rev0/rules.mk index 28cb40d4cb9..668ad9a28c2 100644 --- a/keyboards/ai03/equinox/rev0/rules.mk +++ b/keyboards/ai03/equinox/rev0/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ai03/equinox/rev1/rules.mk b/keyboards/ai03/equinox/rev1/rules.mk index 28cb40d4cb9..668ad9a28c2 100644 --- a/keyboards/ai03/equinox/rev1/rules.mk +++ b/keyboards/ai03/equinox/rev1/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index afce159bf70..74808942fc0 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index 4d18021dc62..80bc0eb11bf 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches USE_I2C = no # I2C for split communication CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) # SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files diff --git a/keyboards/ai03/orbit_x/rules.mk b/keyboards/ai03/orbit_x/rules.mk index f401a9d0b2c..c08aa754582 100644 --- a/keyboards/ai03/orbit_x/rules.mk +++ b/keyboards/ai03/orbit_x/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -SPLIT_KEYBOARD = yes # Split keyboard \ No newline at end of file +SPLIT_KEYBOARD = yes # Split keyboard diff --git a/keyboards/ai03/polaris/rules.mk b/keyboards/ai03/polaris/rules.mk index 56e1ed8e0c4..e5ed9276b92 100644 --- a/keyboards/ai03/polaris/rules.mk +++ b/keyboards/ai03/polaris/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index 58c7454420b..b16d852aafb 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index 46d5a4193be..13f194d5a3a 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index 46d5a4193be..13f194d5a3a 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/al1/rules.mk b/keyboards/al1/rules.mk index b4d4f87d918..3f0ce449947 100644 --- a/keyboards/al1/rules.mk +++ b/keyboards/al1/rules.mk @@ -29,7 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk index 8d93d390d2a..576ae3cf6a7 100644 --- a/keyboards/alf/dc60/rules.mk +++ b/keyboards/alf/dc60/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index 6c2b8080c5f..5d37e73dd3f 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto diff --git a/keyboards/allison/rules.mk b/keyboards/allison/rules.mk index 11ee9baaacb..c26a68e61ef 100644 --- a/keyboards/allison/rules.mk +++ b/keyboards/allison/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/allison_numpad/rules.mk b/keyboards/allison_numpad/rules.mk index 9b102bddccf..3c176844bdf 100644 --- a/keyboards/allison_numpad/rules.mk +++ b/keyboards/allison_numpad/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_6x4 numpad_6x4 diff --git a/keyboards/amj96/rules.mk b/keyboards/amj96/rules.mk index 4fd85850962..6009b14d8dc 100644 --- a/keyboards/amj96/rules.mk +++ b/keyboards/amj96/rules.mk @@ -29,7 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index e65c6c1c73f..97fa9bc76fe 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/angel17/alpha/rules.mk b/keyboards/angel17/alpha/rules.mk index 931a6412cb9..a67a6c9a39e 100644 --- a/keyboards/angel17/alpha/rules.mk +++ b/keyboards/angel17/alpha/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rev1/rules.mk b/keyboards/angel17/rev1/rules.mk index d2c2b8f9222..430c757c28b 100644 --- a/keyboards/angel17/rev1/rules.mk +++ b/keyboards/angel17/rev1/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rules.mk b/keyboards/angel17/rules.mk index 8106f4651ef..b4a8f4b5f71 100644 --- a/keyboards/angel17/rules.mk +++ b/keyboards/angel17/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_5x4 diff --git a/keyboards/angel64/rules.mk b/keyboards/angel64/rules.mk index 7da4be67989..9bb80ed5bde 100644 --- a/keyboards/angel64/rules.mk +++ b/keyboards/angel64/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches OLED_DRIVER_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/aos/tkl/rules.mk b/keyboards/aos/tkl/rules.mk index 7a4fa893913..a56c38a8d1b 100644 --- a/keyboards/aos/tkl/rules.mk +++ b/keyboards/aos/tkl/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/aplyard/aplx6/rev1/rules.mk b/keyboards/aplyard/aplx6/rev1/rules.mk index 15167ce88f4..905393fa393 100644 --- a/keyboards/aplyard/aplx6/rev1/rules.mk +++ b/keyboards/aplyard/aplx6/rev1/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = yes # Unicode diff --git a/keyboards/arabica37/rev1/rules.mk b/keyboards/arabica37/rev1/rules.mk index 7b230343f18..251868bbda2 100644 --- a/keyboards/arabica37/rev1/rules.mk +++ b/keyboards/arabica37/rev1/rules.mk @@ -27,6 +27,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/arisu/rules.mk b/keyboards/arisu/rules.mk index de04a1164a4..a83e4649fae 100644 --- a/keyboards/arisu/rules.mk +++ b/keyboards/arisu/rules.mk @@ -21,4 +21,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ash1800/rules.mk b/keyboards/ash1800/rules.mk index 36606ade233..dc36b11b99a 100644 --- a/keyboards/ash1800/rules.mk +++ b/keyboards/ash1800/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ashpil/modelm_usbc/rules.mk index fbb929ed896..714408a2e9d 100644 --- a/keyboards/ashpil/modelm_usbc/rules.mk +++ b/keyboards/ashpil/modelm_usbc/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index cc8f0c91125..cc58cd46478 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -16,6 +16,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = yes # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEFAULT_FOLDER = atreus/astar diff --git a/keyboards/atxkb/1894/rules.mk b/keyboards/atxkb/1894/rules.mk index 7910681a315..cdd4a7324b6 100644 --- a/keyboards/atxkb/1894/rules.mk +++ b/keyboards/atxkb/1894/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/aves65/rules.mk b/keyboards/aves65/rules.mk index e89014466ea..d4c28631d06 100644 --- a/keyboards/aves65/rules.mk +++ b/keyboards/aves65/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_iso_blocker diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk index a26ad25f89e..0bd78643cee 100644 --- a/keyboards/baguette/rules.mk +++ b/keyboards/baguette/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bakeneko80/rules.mk b/keyboards/bakeneko80/rules.mk index 1cec2845622..653fcdb380b 100644 --- a/keyboards/bakeneko80/rules.mk +++ b/keyboards/bakeneko80/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi diff --git a/keyboards/bat43/rules.mk b/keyboards/bat43/rules.mk index c35119993a0..8ecfbf9f29d 100644 --- a/keyboards/bat43/rules.mk +++ b/keyboards/bat43/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEFAULT_FOLDER = bat43/rev2 diff --git a/keyboards/bigseries/1key/rules.mk b/keyboards/bigseries/1key/rules.mk index 111ac42f9f8..18863477f06 100755 --- a/keyboards/bigseries/1key/rules.mk +++ b/keyboards/bigseries/1key/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bigseries/2key/rules.mk b/keyboards/bigseries/2key/rules.mk index 111ac42f9f8..18863477f06 100755 --- a/keyboards/bigseries/2key/rules.mk +++ b/keyboards/bigseries/2key/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bigseries/3key/rules.mk b/keyboards/bigseries/3key/rules.mk index 111ac42f9f8..18863477f06 100755 --- a/keyboards/bigseries/3key/rules.mk +++ b/keyboards/bigseries/3key/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bigseries/4key/rules.mk b/keyboards/bigseries/4key/rules.mk index 111ac42f9f8..18863477f06 100755 --- a/keyboards/bigseries/4key/rules.mk +++ b/keyboards/bigseries/4key/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index 3233ee2f78c..e32a36be836 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes diff --git a/keyboards/bm16a/rules.mk b/keyboards/bm16a/rules.mk index b4b9ee049f1..cd6f78f43ba 100644 --- a/keyboards/bm16a/rules.mk +++ b/keyboards/bm16a/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 diff --git a/keyboards/bm43a/rules.mk b/keyboards/bm43a/rules.mk index dfc402a39fe..2b32bbee922 100644 --- a/keyboards/bm43a/rules.mk +++ b/keyboards/bm43a/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bm60rgb/rules.mk b/keyboards/bm60rgb/rules.mk index 9e0e36610be..bf1b1ffa4d7 100644 --- a/keyboards/bm60rgb/rules.mk +++ b/keyboards/bm60rgb/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 LTO_ENABLE = yes diff --git a/keyboards/boardsource/4x12/rules.mk b/keyboards/boardsource/4x12/rules.mk index dea0aa2a91e..6799d707246 100644 --- a/keyboards/boardsource/4x12/rules.mk +++ b/keyboards/boardsource/4x12/rules.mk @@ -28,7 +28,7 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + LAYOUTS = ortho_4x12 # Disable unsupported hardware diff --git a/keyboards/boardsource/5x12/rules.mk b/keyboards/boardsource/5x12/rules.mk index de6f7bd3cfa..4a60507b48b 100644 --- a/keyboards/boardsource/5x12/rules.mk +++ b/keyboards/boardsource/5x12/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x12 diff --git a/keyboards/botanicalkeyboards/fm2u/rules.mk b/keyboards/botanicalkeyboards/fm2u/rules.mk index 14d4b348dec..be430973562 100644 --- a/keyboards/botanicalkeyboards/fm2u/rules.mk +++ b/keyboards/botanicalkeyboards/fm2u/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk index 856481d0317..1b0aead1d0f 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/QFR_JM/rules.mk @@ -13,5 +13,5 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk index 649fe6ee7ea..8756a89b6ef 100644 --- a/keyboards/bpiphany/frosty_flake/rules.mk +++ b/keyboards/bpiphany/frosty_flake/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk index ed6caaa5d07..0aafb9099f6 100644 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ b/keyboards/bpiphany/sixshooter/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk index f6c3a48941e..23546e4f0a0 100644 --- a/keyboards/bpiphany/tiger_lily/rules.mk +++ b/keyboards/bpiphany/tiger_lily/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk index 7afc2d03960..b211fa5e976 100644 --- a/keyboards/bpiphany/unloved_bastard/rules.mk +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk index 524144836d6..1a7800dd14d 100644 --- a/keyboards/bthlabs/geekpad/rules.mk +++ b/keyboards/bthlabs/geekpad/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk index 281a60bac1b..19083c8c473 100644 --- a/keyboards/business_card/alpha/rules.mk +++ b/keyboards/business_card/alpha/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches OLED_DRIVER_ENABLE = yes diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk index 281a60bac1b..19083c8c473 100644 --- a/keyboards/business_card/beta/rules.mk +++ b/keyboards/business_card/beta/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches OLED_DRIVER_ENABLE = yes diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk index 7b58e035f91..5989077345f 100644 --- a/keyboards/business_card/rules.mk +++ b/keyboards/business_card/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEFAULT_FOLDER = business_card/beta diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk index fd12ef84bf0..3ff3bb91981 100644 --- a/keyboards/cannonkeys/obliterated75/rules.mk +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -16,10 +16,9 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches WS2812_DRIVER = spi -# Wildcard to allow APM32 MCU +# Wildcard to allow APM32 MCU DFU_SUFFIX_ARGS = -p FFFF -v FFFF # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/chidori/rules.mk b/keyboards/chidori/rules.mk index b2b28b32ab9..312a4a372e2 100644 --- a/keyboards/chidori/rules.mk +++ b/keyboards/chidori/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk index fec1bef7308..c11b5c601ea 100644 --- a/keyboards/chimera_ortho_plus/rules.mk +++ b/keyboards/chimera_ortho_plus/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/choc_taro/rules.mk b/keyboards/choc_taro/rules.mk index c11995e538b..19b81990aab 100644 --- a/keyboards/choc_taro/rules.mk +++ b/keyboards/choc_taro/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index 83d55e0f706..715738a0cd4 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -29,4 +29,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by d UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk index 7c0477bcf95..6910997e8e3 100644 --- a/keyboards/ckeys/nakey/rules.mk +++ b/keyboards/ckeys/nakey/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_5x4 diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk index 686511ff8aa..706cfd61f9a 100644 --- a/keyboards/ckeys/obelus/rules.mk +++ b/keyboards/ckeys/obelus/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = yes # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 diff --git a/keyboards/ckeys/washington/rules.mk b/keyboards/ckeys/washington/rules.mk index f14456c013c..65f6105055e 100644 --- a/keyboards/ckeys/washington/rules.mk +++ b/keyboards/ckeys/washington/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable support for encoders OLED_DRIVER_ENABLE = yes # Enable support for OLED displays diff --git a/keyboards/clawsome/bookerboard/rules.mk b/keyboards/clawsome/bookerboard/rules.mk index 2915f8db927..92a34279957 100644 --- a/keyboards/clawsome/bookerboard/rules.mk +++ b/keyboards/clawsome/bookerboard/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/clawsome/coupe/rules.mk b/keyboards/clawsome/coupe/rules.mk index d0ec2731c5e..dba2a63d44b 100644 --- a/keyboards/clawsome/coupe/rules.mk +++ b/keyboards/clawsome/coupe/rules.mk @@ -22,6 +22,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi diff --git a/keyboards/clawsome/gamebuddy/rules.mk b/keyboards/clawsome/gamebuddy/rules.mk index 44d0c26b753..a3a91009b08 100644 --- a/keyboards/clawsome/gamebuddy/rules.mk +++ b/keyboards/clawsome/gamebuddy/rules.mk @@ -22,4 +22,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/clawsome/sedan/rules.mk b/keyboards/clawsome/sedan/rules.mk index c06c0806fd2..47532471a21 100644 --- a/keyboards/clawsome/sedan/rules.mk +++ b/keyboards/clawsome/sedan/rules.mk @@ -22,6 +22,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi diff --git a/keyboards/clawsome/sidekick/rules.mk b/keyboards/clawsome/sidekick/rules.mk index 22a9b129fe3..8c9c905e65d 100644 --- a/keyboards/clawsome/sidekick/rules.mk +++ b/keyboards/clawsome/sidekick/rules.mk @@ -22,4 +22,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/cocoa40/rules.mk b/keyboards/cocoa40/rules.mk index 08e605991be..5d56f07fa82 100644 --- a/keyboards/cocoa40/rules.mk +++ b/keyboards/cocoa40/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk index af0443666ed..24ee74d0b94 100644 --- a/keyboards/converter/modelm101/rules.mk +++ b/keyboards/converter/modelm101/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk index 7854599db89..b828d7c361d 100644 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ b/keyboards/converter/numeric_keypad_IIe/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index acd5cb5d935..93e85832dc1 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -16,7 +16,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches BLUETOOTH = AdafruitBLE ADAFRUIT_BLE_ENABLE = yes diff --git a/keyboards/copenhagen_click/click_pad_v1/rules.mk b/keyboards/copenhagen_click/click_pad_v1/rules.mk index 7a522581894..2bfc5d09576 100755 --- a/keyboards/copenhagen_click/click_pad_v1/rules.mk +++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index 62d60ef29fd..057bea42bbb 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 81997e7fda2..c5153c876e8 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -32,6 +32,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index 7bed2f555e8..6efa76cb907 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index 0418bb9aab6..4a4a7e1e72c 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_5x4 diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index a557426282c..65dbecf214f 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -32,6 +32,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi diff --git a/keyboards/coseyfannitutti/romeo/rules.mk b/keyboards/coseyfannitutti/romeo/rules.mk index ee79d15ac35..51d0b1ef733 100644 --- a/keyboards/coseyfannitutti/romeo/rules.mk +++ b/keyboards/coseyfannitutti/romeo/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/cospad/rules.mk b/keyboards/cospad/rules.mk index ae6c97d9f41..fd79af01f38 100644 --- a/keyboards/cospad/rules.mk +++ b/keyboards/cospad/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk index 942bfa656e6..36641e4c3d6 100644 --- a/keyboards/cu24/rules.mk +++ b/keyboards/cu24/rules.mk @@ -28,5 +28,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/cu80/rules.mk b/keyboards/cu80/rules.mk index f3f8531355a..7c27fe7f9ed 100644 --- a/keyboards/cu80/rules.mk +++ b/keyboards/cu80/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_iso tkl_ansi diff --git a/keyboards/cutie_club/wraith/rules.mk b/keyboards/cutie_club/wraith/rules.mk index fed01a63eca..dce4ad6866a 100644 --- a/keyboards/cutie_club/wraith/rules.mk +++ b/keyboards/cutie_club/wraith/rules.mk @@ -26,4 +26,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/daisy/rules.mk b/keyboards/daisy/rules.mk index b759cdee730..7d2d6d40561 100644 --- a/keyboards/daisy/rules.mk +++ b/keyboards/daisy/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index f257a56a0a4..5eacd0ae291 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index be07664894e..d5d46635570 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -28,7 +28,7 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ i2c_master.c diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index 1f6883a8b19..619a7cc51c9 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index f257a56a0a4..5eacd0ae291 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk index ccb7c3e9176..5df20f03f8e 100644 --- a/keyboards/deltasplit75/rules.mk +++ b/keyboards/deltasplit75/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/dm9records/plaid/rules.mk b/keyboards/dm9records/plaid/rules.mk index 315af269304..756cfc1fe99 100644 --- a/keyboards/dm9records/plaid/rules.mk +++ b/keyboards/dm9records/plaid/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x12 planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/dm9records/tartan/rules.mk b/keyboards/dm9records/tartan/rules.mk index 241f8404f64..a4bffe29d36 100644 --- a/keyboards/dm9records/tartan/rules.mk +++ b/keyboards/dm9records/tartan/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift LAYOUTS_HAS_RGB = no diff --git a/keyboards/dmqdesign/spin/rules.mk b/keyboards/dmqdesign/spin/rules.mk index 6e8b2ffbfd4..a299f2da5a0 100644 --- a/keyboards/dmqdesign/spin/rules.mk +++ b/keyboards/dmqdesign/spin/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = yes # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable rotary encoder support diff --git a/keyboards/donutcables/scrabblepad/rules.mk b/keyboards/donutcables/scrabblepad/rules.mk index 51717e2e229..a4d303b0d32 100644 --- a/keyboards/donutcables/scrabblepad/rules.mk +++ b/keyboards/donutcables/scrabblepad/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/doppelganger/rules.mk b/keyboards/doppelganger/rules.mk index e8240a14646..e10f6450b2a 100644 --- a/keyboards/doppelganger/rules.mk +++ b/keyboards/doppelganger/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index a6b5ddaff0f..fa93c56d255 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index 0b9ecabb73f..037b1d97833 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index 958fee52eae..7f249431642 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/dozen0/rules.mk b/keyboards/dozen0/rules.mk index 415a8b44a02..271ccf470f4 100644 --- a/keyboards/dozen0/rules.mk +++ b/keyboards/dozen0/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index 02068d86eb9..c18d9605e13 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Use RGB underglow light RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = IS31FL3731 # Use RGB matrix diff --git a/keyboards/duck/eagle_viper/v2/rules.mk b/keyboards/duck/eagle_viper/v2/rules.mk index a8c804e52c4..2f1b12397f8 100644 --- a/keyboards/duck/eagle_viper/v2/rules.mk +++ b/keyboards/duck/eagle_viper/v2/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index e5da58234e9..1fd9c3e8272 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += indicator_leds.c \ diff --git a/keyboards/duck/lightsaver/rules.mk b/keyboards/duck/lightsaver/rules.mk index 64e18c9b11d..6c6a776771d 100644 --- a/keyboards/duck/lightsaver/rules.mk +++ b/keyboards/duck/lightsaver/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/octagon/v1/rules.mk b/keyboards/duck/octagon/v1/rules.mk index 4a8191fa614..18b7d73dd14 100644 --- a/keyboards/duck/octagon/v1/rules.mk +++ b/keyboards/duck/octagon/v1/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/octagon/v2/rules.mk b/keyboards/duck/octagon/v2/rules.mk index 49f3f12f52d..1fdf9c77e78 100644 --- a/keyboards/duck/octagon/v2/rules.mk +++ b/keyboards/duck/octagon/v2/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/orion/v3/rules.mk b/keyboards/duck/orion/v3/rules.mk index 019dd7dd3df..a120d0c08c9 100644 --- a/keyboards/duck/orion/v3/rules.mk +++ b/keyboards/duck/orion/v3/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/tcv3/rules.mk b/keyboards/duck/tcv3/rules.mk index a9d0012c02c..58de5294c25 100644 --- a/keyboards/duck/tcv3/rules.mk +++ b/keyboards/duck/tcv3/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/dumbpad/rules.mk b/keyboards/dumbpad/rules.mk index 656801c6884..2ccf3e8228d 100644 --- a/keyboards/dumbpad/rules.mk +++ b/keyboards/dumbpad/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes MOUSEKEY_ENABLE = yes diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index 88207bc3f51..f6b7f394cc8 100644 --- a/keyboards/dztech/dz60rgb/v1/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -19,7 +19,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb/v2/rules.mk b/keyboards/dztech/dz60rgb/v2/rules.mk index ed83bd9ac0b..f35c9f40c9d 100644 --- a/keyboards/dztech/dz60rgb/v2/rules.mk +++ b/keyboards/dztech/dz60rgb/v2/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index 88207bc3f51..f6b7f394cc8 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -19,7 +19,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk index ed83bd9ac0b..f35c9f40c9d 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index 426769e248f..e8753127ef5 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -19,7 +19,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk index 89b742415c2..5386768c261 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index da88300da54..8751af64913 100644 --- a/keyboards/dztech/dz65rgb/v1/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk @@ -19,7 +19,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/dztech/dz65rgb/v2/rules.mk b/keyboards/dztech/dz65rgb/v2/rules.mk index 5ecaae70b6b..4267e708061 100644 --- a/keyboards/dztech/dz65rgb/v2/rules.mk +++ b/keyboards/dztech/dz65rgb/v2/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/eniigmakeyboards/ek87/rules.mk b/keyboards/eniigmakeyboards/ek87/rules.mk index 0aca1d07e14..cb477d0661d 100644 --- a/keyboards/eniigmakeyboards/ek87/rules.mk +++ b/keyboards/eniigmakeyboards/ek87/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk index 2a6501e095c..a818ddd6227 100644 --- a/keyboards/ep/40/rules.mk +++ b/keyboards/ep/40/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk index 2a6501e095c..a818ddd6227 100644 --- a/keyboards/ep/96/rules.mk +++ b/keyboards/ep/96/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index 0001317dfcc..276a85cbc68 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index 985f756c189..08b69dae9e8 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index 46d5a4193be..13f194d5a3a 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ergo42/rules.mk b/keyboards/ergo42/rules.mk index d83fc056a3c..b593de2be37 100644 --- a/keyboards/ergo42/rules.mk +++ b/keyboards/ergo42/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/ergodox_ez/keymaps/hacker_dvorak/rules.mk b/keyboards/ergodox_ez/keymaps/hacker_dvorak/rules.mk index 2eda18ce4ff..184a90228e4 100644 --- a/keyboards/ergodox_ez/keymaps/hacker_dvorak/rules.mk +++ b/keyboards/ergodox_ez/keymaps/hacker_dvorak/rules.mk @@ -26,7 +26,6 @@ SWAP_HANDS_ENABLE = no # Allow swapping hands of keyboard. # MIDI_ENABLE = no # BLUETOOTH_ENABLE = no # AUDIO_ENABLE = no -# FAUXCLICKY_ENABLE = no # VARIABLE_TRACE = no # BACKLIGHT_ENABLE = no # RGB_MATRIX_ENABLE = no diff --git a/keyboards/ergosaurus/rules.mk b/keyboards/ergosaurus/rules.mk index f504ffaeb9f..841c3fb6c4a 100644 --- a/keyboards/ergosaurus/rules.mk +++ b/keyboards/ergosaurus/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = alice_split_bs diff --git a/keyboards/ericrlau/numdiscipline/rev1/rules.mk b/keyboards/ericrlau/numdiscipline/rev1/rules.mk index b47e0fe862f..03063dec2f2 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/rules.mk +++ b/keyboards/ericrlau/numdiscipline/rev1/rules.mk @@ -32,4 +32,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk index f4ab408eb36..969a296835e 100644 --- a/keyboards/evyd13/eon40/rules.mk +++ b/keyboards/evyd13/eon40/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk index e34ef7475a2..9c35f1e1aea 100644 --- a/keyboards/evyd13/eon65/rules.mk +++ b/keyboards/evyd13/eon65/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk index 264e0ea67d2..b78fcc9f5ae 100644 --- a/keyboards/evyd13/eon75/rules.mk +++ b/keyboards/evyd13/eon75/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk index 65cfca7d4bb..101ebacc81e 100644 --- a/keyboards/evyd13/eon87/rules.mk +++ b/keyboards/evyd13/eon87/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk index 264e0ea67d2..b78fcc9f5ae 100644 --- a/keyboards/evyd13/eon95/rules.mk +++ b/keyboards/evyd13/eon95/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/minitomic/rules.mk b/keyboards/evyd13/minitomic/rules.mk index aac492de069..ace92897125 100644 --- a/keyboards/evyd13/minitomic/rules.mk +++ b/keyboards/evyd13/minitomic/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk index 400781b07fd..4945986f5a9 100644 --- a/keyboards/evyd13/mx5160/rules.mk +++ b/keyboards/evyd13/mx5160/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk index 9fad8888552..fb5654deacb 100644 --- a/keyboards/evyd13/nt660/rules.mk +++ b/keyboards/evyd13/nt660/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk index 8fc9b9c73d4..10033a9bfd3 100644 --- a/keyboards/evyd13/omrontkl/rules.mk +++ b/keyboards/evyd13/omrontkl/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk index 9984f276793..b45c0bc0305 100644 --- a/keyboards/evyd13/ta65/rules.mk +++ b/keyboards/evyd13/ta65/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk index 575e63f5bca..0a9f00403c6 100644 --- a/keyboards/evyd13/wasdat/rules.mk +++ b/keyboards/evyd13/wasdat/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk index 1ff76bab21c..48430ee3cd2 100644 --- a/keyboards/evyd13/wasdat_code/rules.mk +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index 8e3dce6be60..e9db9676b3d 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # Use RGB underglow light RGB_MATRIX_ENABLE = no # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index c5a5556118f..f61cdd43818 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -30,4 +30,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index c5a5556118f..f61cdd43818 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -30,4 +30,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/exclusive/e7v1se/rules.mk b/keyboards/exclusive/e7v1se/rules.mk index 8bc92352f5e..4e6cf8c855d 100644 --- a/keyboards/exclusive/e7v1se/rules.mk +++ b/keyboards/exclusive/e7v1se/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/fallacy/rules.mk b/keyboards/fallacy/rules.mk index c3c94521b16..dfc96a31b83 100755 --- a/keyboards/fallacy/rules.mk +++ b/keyboards/fallacy/rules.mk @@ -21,7 +21,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC += indicators.c \ diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index 8624f296339..01db7a2123b 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x4 diff --git a/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk b/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk index 75da67fa47a..d6c3b1880e8 100644 --- a/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk +++ b/keyboards/flehrad/bigswitch/keymaps/wanleg/rules.mk @@ -12,4 +12,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index 39fa656c614..0d85f98c411 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/fleuron/rules.mk b/keyboards/fleuron/rules.mk index 5724f3b98d4..36e2f74657f 100644 --- a/keyboards/fleuron/rules.mk +++ b/keyboards/fleuron/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes LAYOUTS = ortho_6x16 diff --git a/keyboards/fluorite/rules.mk b/keyboards/fluorite/rules.mk index 06f4f401f77..12370035132 100644 --- a/keyboards/fluorite/rules.mk +++ b/keyboards/fluorite/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/flx/lodestone/rules.mk b/keyboards/flx/lodestone/rules.mk index 4bcf2708be1..70c9bc8bdec 100644 --- a/keyboards/flx/lodestone/rules.mk +++ b/keyboards/flx/lodestone/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/flx/virgo/rules.mk b/keyboards/flx/virgo/rules.mk index cbf45a2b9be..381040642c1 100644 --- a/keyboards/flx/virgo/rules.mk +++ b/keyboards/flx/virgo/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/fortitude60/rules.mk b/keyboards/fortitude60/rules.mk index 1a4cb1c8b07..d866b0bc02b 100644 --- a/keyboards/fortitude60/rules.mk +++ b/keyboards/fortitude60/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/foxlab/key65/hotswap/rules.mk b/keyboards/foxlab/key65/hotswap/rules.mk index 15ccf06490e..bbcb451e1ea 100644 --- a/keyboards/foxlab/key65/hotswap/rules.mk +++ b/keyboards/foxlab/key65/hotswap/rules.mk @@ -24,4 +24,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/foxlab/key65/universal/rules.mk b/keyboards/foxlab/key65/universal/rules.mk index 24a570cf2d7..4552456ef58 100644 --- a/keyboards/foxlab/key65/universal/rules.mk +++ b/keyboards/foxlab/key65/universal/rules.mk @@ -24,6 +24,5 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker_split_bs # Support community layouts diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index d1587baeba5..6d4bcc7ef05 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index 8df2f1fe818..c1876cd2b49 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/funky40/rules.mk b/keyboards/funky40/rules.mk index eebf90715d9..138ac68e208 100644 --- a/keyboards/funky40/rules.mk +++ b/keyboards/funky40/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gami_studio/lex60/rules.mk b/keyboards/gami_studio/lex60/rules.mk index 84bbccfba1f..ee841fc37dc 100644 --- a/keyboards/gami_studio/lex60/rules.mk +++ b/keyboards/gami_studio/lex60/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index 396cfdf20c9..518fb35212d 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/ghs/rar/rules.mk b/keyboards/ghs/rar/rules.mk index c291ba80278..89509df45fe 100644 --- a/keyboards/ghs/rar/rules.mk +++ b/keyboards/ghs/rar/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index c4e36e87781..3cebbe83afd 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -32,6 +32,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite diff --git a/keyboards/gon/nerd60/keymaps/mauin/rules.mk b/keyboards/gon/nerd60/keymaps/mauin/rules.mk index 6094ff6603e..949aff1cd7c 100644 --- a/keyboards/gon/nerd60/keymaps/mauin/rules.mk +++ b/keyboards/gon/nerd60/keymaps/mauin/rules.mk @@ -16,4 +16,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gon/nerd60/rules.mk b/keyboards/gon/nerd60/rules.mk index 74fd4fcc326..2401cbea859 100644 --- a/keyboards/gon/nerd60/rules.mk +++ b/keyboards/gon/nerd60/rules.mk @@ -32,4 +32,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk b/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk index e827f507234..6151bcf2317 100644 --- a/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk +++ b/keyboards/gon/nerdtkl/keymaps/gam3cat/rules.mk @@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches #VARIABLE_TRACE = no # Use this to debug changes to variable values API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings KEY_LOCK_ENABLE = no # This enables key lock diff --git a/keyboards/gon/nerdtkl/rules.mk b/keyboards/gon/nerdtkl/rules.mk index 74fd4fcc326..2401cbea859 100644 --- a/keyboards/gon/nerdtkl/rules.mk +++ b/keyboards/gon/nerdtkl/rules.mk @@ -32,4 +32,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gowla/rules.mk b/keyboards/gowla/rules.mk index 19b6f44b8f9..bc65eff6dfc 100644 --- a/keyboards/gowla/rules.mk +++ b/keyboards/gowla/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gray_studio/cod67/rules.mk b/keyboards/gray_studio/cod67/rules.mk index 548af8df828..129bd624cce 100644 --- a/keyboards/gray_studio/cod67/rules.mk +++ b/keyboards/gray_studio/cod67/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index b882a3a19ad..4c8bf40bab4 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker 65_iso_blocker diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk index dac30fa9fbe..b0d113e640a 100644 --- a/keyboards/gray_studio/think65/hotswap/rules.mk +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/gray_studio/think65/solder/rules.mk b/keyboards/gray_studio/think65/solder/rules.mk index dac30fa9fbe..b0d113e640a 100644 --- a/keyboards/gray_studio/think65/solder/rules.mk +++ b/keyboards/gray_studio/think65/solder/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk index 17c51ec37ca..b57bf344233 100644 --- a/keyboards/grid600/press/rules.mk +++ b/keyboards/grid600/press/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index 28e6adcc23f..a0eb4c804fb 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 848c79fe34d..6cb226c22df 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches PS2_MOUSE_ENABLE = yes PS2_USE_USART = yes diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index de611b460e5..044a6d01e9e 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x16 diff --git a/keyboards/handwired/42/rules.mk b/keyboards/handwired/42/rules.mk index 183d4db0c33..1ea057e4441 100644 --- a/keyboards/handwired/42/rules.mk +++ b/keyboards/handwired/42/rules.mk @@ -30,7 +30,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # ^^ diff --git a/keyboards/handwired/aplx2/rules.mk b/keyboards/handwired/aplx2/rules.mk index 38c15fafe53..6765381b939 100644 --- a/keyboards/handwired/aplx2/rules.mk +++ b/keyboards/handwired/aplx2/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/aranck/rules.mk b/keyboards/handwired/aranck/rules.mk index b41c39374a0..237d6c0c42f 100644 --- a/keyboards/handwired/aranck/rules.mk +++ b/keyboards/handwired/aranck/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -LAYOUTS = planck_mit \ No newline at end of file +LAYOUTS = planck_mit diff --git a/keyboards/handwired/bdn9_ble/rules.mk b/keyboards/handwired/bdn9_ble/rules.mk index 48cc9d5f0b1..92ab17adecf 100644 --- a/keyboards/handwired/bdn9_ble/rules.mk +++ b/keyboards/handwired/bdn9_ble/rules.mk @@ -32,5 +32,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE # Enable Bluetooth AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = no diff --git a/keyboards/handwired/boss566y/redragon_vara/rules.mk b/keyboards/handwired/boss566y/redragon_vara/rules.mk index 958a948fb43..ddcd971b98b 100644 --- a/keyboards/handwired/boss566y/redragon_vara/rules.mk +++ b/keyboards/handwired/boss566y/redragon_vara/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = fullsize_ansi diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk index 84bb4e82d11..e3c398bbf87 100644 --- a/keyboards/handwired/cans12er/rules.mk +++ b/keyboards/handwired/cans12er/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/chiron/rules.mk b/keyboards/handwired/chiron/rules.mk index 85aff72cb1b..800b196324b 100644 --- a/keyboards/handwired/chiron/rules.mk +++ b/keyboards/handwired/chiron/rules.mk @@ -23,7 +23,6 @@ COMMAND_ENABLE = no CONSOLE_ENABLE = no DEBUG_ENABLE = no EXTRAKEY_ENABLE = no -FAUXCLICKY_ENABLE = no LEADER_ENABLE = no MIDI_ENABLE = no MOUSEKEY_ENABLE = yes diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index 56b5aed0a39..ae50334a368 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LEADER_ENABLE = yes # Turn on leader support # Layouts supported by this PCB: diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 1c0ec5c9116..77e6d03d637 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = no # Use link time optimization RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index f29d5333c32..ab0c05e1106 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/fc200rt_qmk/rules.mk b/keyboards/handwired/fc200rt_qmk/rules.mk index 5e832358bbe..fb1748db03d 100644 --- a/keyboards/handwired/fc200rt_qmk/rules.mk +++ b/keyboards/handwired/fc200rt_qmk/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index 88bc406a23d..131e8fb26db 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -19,5 +19,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index 9e64f161af9..8c7a0a73b37 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -32,7 +32,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches BLUETOOTH = AdafruitBLE LAYOUTS = 60_tsangan_hhkb diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 291da87cfd7..46ef60a8be5 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in BLUETOOTH = RN42 diff --git a/keyboards/handwired/heisenberg/rules.mk b/keyboards/handwired/heisenberg/rules.mk index 10046d71028..8d79915fd28 100644 --- a/keyboards/handwired/heisenberg/rules.mk +++ b/keyboards/handwired/heisenberg/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = planck_mit diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 39d9374de23..3005ce89daf 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index d4586014aee..016367866fa 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes -RGB_MATRIX_DRIVER = WS2812 \ No newline at end of file +RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index f775fa03b37..c26bc7a9913 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index f07380121a0..679f9c6bd0d 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/jtallbean/split_65/rules.mk b/keyboards/handwired/jtallbean/split_65/rules.mk index 7f96d78328c..5fa9d561ba1 100644 --- a/keyboards/handwired/jtallbean/split_65/rules.mk +++ b/keyboards/handwired/jtallbean/split_65/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes # Enable split keyboard support diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index 25dfc3947c5..264ff6dcb97 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/k8split/rules.mk b/keyboards/handwired/k8split/rules.mk index 3c7b0282c59..cedc7b4debb 100644 --- a/keyboards/handwired/k8split/rules.mk +++ b/keyboards/handwired/k8split/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index 0c840986330..ddff1d3548e 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index 01cefabcc63..6c03d99a45f 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index e9e9fc84ba3..64837b88ee6 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/novem/rules.mk b/keyboards/handwired/novem/rules.mk index e7acaabf8e0..21e28e680f5 100644 --- a/keyboards/handwired/novem/rules.mk +++ b/keyboards/handwired/novem/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/onekey/rules.mk b/keyboards/handwired/onekey/rules.mk index ac343e16638..259050d5530 100644 --- a/keyboards/handwired/onekey/rules.mk +++ b/keyboards/handwired/onekey/rules.mk @@ -16,7 +16,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEFAULT_FOLDER = handwired/onekey/promicro LAYOUTS = ortho_1x1 diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index 126ec89628c..65fb1259fbb 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes OLED_DRIVER_ENABLE = no diff --git a/keyboards/handwired/p1800fl/rules.mk b/keyboards/handwired/p1800fl/rules.mk index 60ec4f699c0..b85602bb9de 100644 --- a/keyboards/handwired/p1800fl/rules.mk +++ b/keyboards/handwired/p1800fl/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/p65rgb/rules.mk b/keyboards/handwired/p65rgb/rules.mk index f70d945ca43..7e8ac8d55e1 100644 --- a/keyboards/handwired/p65rgb/rules.mk +++ b/keyboards/handwired/p65rgb/rules.mk @@ -30,4 +30,3 @@ RGB_MATRIX_DRIVER = WS2812 MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/postageboard/mini/rules.mk b/keyboards/handwired/postageboard/mini/rules.mk index bd7866ecf14..824b47d6f80 100644 --- a/keyboards/handwired/postageboard/mini/rules.mk +++ b/keyboards/handwired/postageboard/mini/rules.mk @@ -25,4 +25,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/postageboard/r1/rules.mk b/keyboards/handwired/postageboard/r1/rules.mk index bd7866ecf14..824b47d6f80 100644 --- a/keyboards/handwired/postageboard/r1/rules.mk +++ b/keyboards/handwired/postageboard/r1/rules.mk @@ -25,4 +25,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index a535e2e8c44..c3e319a1384 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/prime_exl_plus/rules.mk b/keyboards/handwired/prime_exl_plus/rules.mk index 53e9616cc8d..0a36543099c 100644 --- a/keyboards/handwired/prime_exl_plus/rules.mk +++ b/keyboards/handwired/prime_exl_plus/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/promethium/keymaps/default/rules.mk b/keyboards/handwired/promethium/keymaps/default/rules.mk index 5761be51701..4d23b550517 100644 --- a/keyboards/handwired/promethium/keymaps/default/rules.mk +++ b/keyboards/handwired/promethium/keymaps/default/rules.mk @@ -1,7 +1,7 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) @@ -16,10 +16,9 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_MOUSE_ENABLE = yes PS2_USE_INT = yes -FAUXCLICKY_ENABLE = yes BLUETOOTH = AdafruitBLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/promethium/keymaps/priyadi/rules.mk b/keyboards/handwired/promethium/keymaps/priyadi/rules.mk index 5761be51701..4d23b550517 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/rules.mk +++ b/keyboards/handwired/promethium/keymaps/priyadi/rules.mk @@ -1,7 +1,7 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) @@ -16,10 +16,9 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_MOUSE_ENABLE = yes PS2_USE_INT = yes -FAUXCLICKY_ENABLE = yes BLUETOOTH = AdafruitBLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/sick68/rules.mk b/keyboards/handwired/sick68/rules.mk index fa2740ae656..c74742abd56 100644 --- a/keyboards/handwired/sick68/rules.mk +++ b/keyboards/handwired/sick68/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index 5c2cc5d9799..9726e71443f 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -33,4 +33,3 @@ UNICODE_ENABLE = no # Unicode #BLUETOOTH_ENABLE = Yes # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH = AdafruitBLE AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/sticc14/rules.mk b/keyboards/handwired/sticc14/rules.mk index 99931790ceb..60ef8b9e590 100644 --- a/keyboards/handwired/sticc14/rules.mk +++ b/keyboards/handwired/sticc14/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/swiftrax/cowfish/rules.mk b/keyboards/handwired/swiftrax/cowfish/rules.mk index ad6547e1e7b..aed5553f669 100644 --- a/keyboards/handwired/swiftrax/cowfish/rules.mk +++ b/keyboards/handwired/swiftrax/cowfish/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches \ No newline at end of file diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index c7ec2f8d0ff..905b15699e4 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # Use link time optimization LAYOUTS = ortho_5x14 diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index a404294f133..0331d64001f 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk index ec1da36328d..b6d70c1964f 100644 --- a/keyboards/handwired/twadlee/tp69/rules.mk +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches PS2_MOUSE_ENABLE = no USE_CHIBIOS_CONTRIB = yes diff --git a/keyboards/handwired/unk/rules.mk b/keyboards/handwired/unk/rules.mk index 667308705f2..e4972eb1d1f 100644 --- a/keyboards/handwired/unk/rules.mk +++ b/keyboards/handwired/unk/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/videowriter/rules.mk b/keyboards/handwired/videowriter/rules.mk index b75d378449c..38356d996cb 100644 --- a/keyboards/handwired/videowriter/rules.mk +++ b/keyboards/handwired/videowriter/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index b23f2a5fe1c..96bfe18ddec 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -18,6 +18,5 @@ LAYOUTS = ortho_4x12 MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches NO_SUSPEND_POWER_DOWN = yes UNICODEMAP_ENABLE = no diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index 12b5a001b30..002be917f16 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index c23c51a599b..75686f92266 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes DEFAULT_FOLDER = hecomi/alpha diff --git a/keyboards/hid_liber/rules.mk b/keyboards/hid_liber/rules.mk index f4d7618ec05..44833d7555d 100755 --- a/keyboards/hid_liber/rules.mk +++ b/keyboards/hid_liber/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Project specific files SRC = matrix.c diff --git a/keyboards/hineybush/h10/rules.mk b/keyboards/hineybush/h10/rules.mk index 45048737989..730ceccf7a6 100644 --- a/keyboards/hineybush/h10/rules.mk +++ b/keyboards/hineybush/h10/rules.mk @@ -21,6 +21,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_6x4 numpad_6x4 diff --git a/keyboards/hineybush/h60/rules.mk b/keyboards/hineybush/h60/rules.mk index 92da9c653f9..3046ecffdbf 100644 --- a/keyboards/hineybush/h60/rules.mk +++ b/keyboards/hineybush/h60/rules.mk @@ -21,5 +21,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches + LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/hineybush/h75_singa/rules.mk b/keyboards/hineybush/h75_singa/rules.mk index d676e0f708b..b4c66cbc2ea 100644 --- a/keyboards/hineybush/h75_singa/rules.mk +++ b/keyboards/hineybush/h75_singa/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/hineybush/h87a/keymaps/gam3cat/rules.mk b/keyboards/hineybush/h87a/keymaps/gam3cat/rules.mk index 85b2b41a6bc..8ac43eadbca 100644 --- a/keyboards/hineybush/h87a/keymaps/gam3cat/rules.mk +++ b/keyboards/hineybush/h87a/keymaps/gam3cat/rules.mk @@ -3,7 +3,7 @@ # the appropriate keymap folder that will get included automatically # TAP_DANCE_ENABLE = no # Enable TapDance functionality -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+1500) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) @@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Uses buzzer to emulate clicky switches. By default, uses the C6 pin, same as AUDIO_ENABLE. #VARIABLE_TRACE = no # Use this to debug changes to variable values API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings(+5390) KEY_LOCK_ENABLE = no # This enables key lock(+260) diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index db167b5ae49..c4a2d842a32 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index 3d7de2731d0..5e0d1726fba 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index e186b39cfa9..c6441d0e84e 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index 77d0f1ec16d..f1d011ad6a0 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/hineybush/physix/rules.mk b/keyboards/hineybush/physix/rules.mk index 20b1e9e5d1c..ca67560c24e 100644 --- a/keyboards/hineybush/physix/rules.mk +++ b/keyboards/hineybush/physix/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk index a7e841a7c13..7ce1eab6dc1 100644 --- a/keyboards/hineybush/sm68/rules.mk +++ b/keyboards/hineybush/sm68/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/hs60/v1/rules.mk b/keyboards/hs60/v1/rules.mk index d344d256a2a..5a261bf6e45 100644 --- a/keyboards/hs60/v1/rules.mk +++ b/keyboards/hs60/v1/rules.mk @@ -33,7 +33,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 RAW_ENABLE = yes diff --git a/keyboards/hub16/rules.mk b/keyboards/hub16/rules.mk index 5409bb7f959..84ed6efcfeb 100755 --- a/keyboards/hub16/rules.mk +++ b/keyboards/hub16/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Rotary Encoder support SRC = matrix.c diff --git a/keyboards/id80/rules.mk b/keyboards/id80/rules.mk index 9f2362db1d9..18bd81e5751 100644 --- a/keyboards/id80/rules.mk +++ b/keyboards/id80/rules.mk @@ -32,7 +32,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # partially generated by KBFirmware JSON to QMK Parser # https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/idobo/rules.mk b/keyboards/idobo/rules.mk index b52603ea4f5..563fa6df7f6 100644 --- a/keyboards/idobo/rules.mk +++ b/keyboards/idobo/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto # Use link time optimization LAYOUTS = ortho_5x15 diff --git a/keyboards/illuminati/is0/rules.mk b/keyboards/illuminati/is0/rules.mk index 85cec5e921d..c88ed284044 100644 --- a/keyboards/illuminati/is0/rules.mk +++ b/keyboards/illuminati/is0/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/jae/j01/rules.mk b/keyboards/jae/j01/rules.mk index 2b3fd31130c..4219cb80c0a 100644 --- a/keyboards/jae/j01/rules.mk +++ b/keyboards/jae/j01/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk b/keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk index 85b2b41a6bc..aaffae573bf 100644 --- a/keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk +++ b/keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk @@ -3,7 +3,7 @@ # the appropriate keymap folder that will get included automatically # TAP_DANCE_ENABLE = no # Enable TapDance functionality -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+1500) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) @@ -16,9 +16,7 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Uses buzzer to emulate clicky switches. By default, uses the C6 pin, same as AUDIO_ENABLE. -#VARIABLE_TRACE = no # Use this to debug changes to variable values +AUDIO_ENABLE = no # Audio output on port C6#VARIABLE_TRACE = no # Use this to debug changes to variable values API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings(+5390) KEY_LOCK_ENABLE = no # This enables key lock(+260) SPLIT_KEYBOARD = no # This enables split keyboard support and includes all necessary files located at quantum/split_common diff --git a/keyboards/jisplit89/rules.mk b/keyboards/jisplit89/rules.mk index 3c602ad4a50..4c02d3ad5ef 100644 --- a/keyboards/jisplit89/rules.mk +++ b/keyboards/jisplit89/rules.mk @@ -21,7 +21,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/jj40/keymaps/stevexyz/rules.mk b/keyboards/jj40/keymaps/stevexyz/rules.mk index 289ed40e7b0..41036eed4fe 100644 --- a/keyboards/jj40/keymaps/stevexyz/rules.mk +++ b/keyboards/jj40/keymaps/stevexyz/rules.mk @@ -12,7 +12,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches TAP_DANCE_ENABLE = yes diff --git a/keyboards/jj40/rules.mk b/keyboards/jj40/rules.mk index 579c432206c..c3776d1f3f2 100644 --- a/keyboards/jj40/rules.mk +++ b/keyboards/jj40/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index 7b237619f82..bf2062542f5 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -30,6 +30,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x4 diff --git a/keyboards/jnao/rules.mk b/keyboards/jnao/rules.mk index 6e620b56a5b..a64e40057c6 100644 --- a/keyboards/jnao/rules.mk +++ b/keyboards/jnao/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x12 ortho_4x12 LAYOUTS_HAS_RGB = no diff --git a/keyboards/just60/rules.mk b/keyboards/just60/rules.mk index 7e96c8d7a0f..f38f6a27ec8 100644 --- a/keyboards/just60/rules.mk +++ b/keyboards/just60/rules.mk @@ -31,4 +31,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kagamidget/rules.mk b/keyboards/kagamidget/rules.mk index 0037b3d16c2..fb92bfecd7d 100644 --- a/keyboards/kagamidget/rules.mk +++ b/keyboards/kagamidget/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes diff --git a/keyboards/kbdclack/kaishi65/rules.mk b/keyboards/kbdclack/kaishi65/rules.mk index 9fbf5373a51..bcd350e89f9 100644 --- a/keyboards/kbdclack/kaishi65/rules.mk +++ b/keyboards/kbdclack/kaishi65/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk index 39c3a62192d..914ef3c21ed 100644 --- a/keyboards/kbdfans/kbd19x/rules.mk +++ b/keyboards/kbdfans/kbd19x/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk index f4664f8f513..38cca183ca3 100644 --- a/keyboards/kbdfans/kbd4x/rules.mk +++ b/keyboards/kbdfans/kbd4x/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk index 5d6c81e7fbd..4f42fb7f875 100644 --- a/keyboards/kbdfans/kbd66/rules.mk +++ b/keyboards/kbdfans/kbd66/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk index 921458df395..12610edccaf 100644 --- a/keyboards/kbdfans/kbd67/hotswap/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk index 7f3e239ad5c..8a49490966b 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk +++ b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk index 02fadb469a6..39ea074875b 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk index 5ba40c0e79f..786722eb7d2 100644 --- a/keyboards/kbdfans/kbd67/rev1/rules.mk +++ b/keyboards/kbdfans/kbd67/rev1/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk index a46023d8625..108a7517fa7 100644 --- a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk @@ -13,7 +13,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend \ No newline at end of file +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk index bc9b38283af..ef234c53fd9 100644 --- a/keyboards/kbdfans/kbd67/rev2/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi 65_iso 65_ansi_blocker 65_ansi_blocker_split_bs diff --git a/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk index 20d0ca2083f..00bd80ef0d3 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk +++ b/keyboards/kbdfans/kbd6x/keymaps/othi/rules.mk @@ -13,6 +13,4 @@ UNICODE_ENABLE = yes # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches TAP_DANCE_ENABLE=yes - diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk index fae8f1424e1..e95a436c3e1 100644 --- a/keyboards/kbdfans/kbd6x/rules.mk +++ b/keyboards/kbdfans/kbd6x/rules.mk @@ -29,4 +29,3 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk index c5f1e2866ba..3bb1ec74ed7 100644 --- a/keyboards/kbdfans/kbd8x_mk2/rules.mk +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/kbdfans/kbdmini/rules.mk b/keyboards/kbdfans/kbdmini/rules.mk index 0fd579c400a..f83bbdcea49 100644 --- a/keyboards/kbdfans/kbdmini/rules.mk +++ b/keyboards/kbdfans/kbdmini/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk index c53ca99eec6..32e834ee0d4 100644 --- a/keyboards/kbdfans/kbdpad_mk2/rules.mk +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_6x4 diff --git a/keyboards/kbdfans/maja/rules.mk b/keyboards/kbdfans/maja/rules.mk index 47fe6a92fd0..c499a39aac2 100755 --- a/keyboards/kbdfans/maja/rules.mk +++ b/keyboards/kbdfans/maja/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk index 2ad661e363e..0006d9bb852 100644 --- a/keyboards/kc60se/rules.mk +++ b/keyboards/kc60se/rules.mk @@ -27,6 +27,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/keebio/bdn9/rev1/rules.mk b/keyboards/keebio/bdn9/rev1/rules.mk index f2a0fa02cd7..b3c34d2d49c 100644 --- a/keyboards/keebio/bdn9/rev1/rules.mk +++ b/keyboards/keebio/bdn9/rev1/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -ENCODER_ENABLE = yes \ No newline at end of file +ENCODER_ENABLE = yes diff --git a/keyboards/keebio/bdn9/rev2/rules.mk b/keyboards/keebio/bdn9/rev2/rules.mk index ab70fdf768f..f5a500a16e5 100644 --- a/keyboards/keebio/bdn9/rev2/rules.mk +++ b/keyboards/keebio/bdn9/rev2/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/keebio/choconum/rules.mk b/keyboards/keebio/choconum/rules.mk index e7df89bf32d..528c9d6cea3 100644 --- a/keyboards/keebio/choconum/rules.mk +++ b/keyboards/keebio/choconum/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/keebio/ergodicity/rules.mk b/keyboards/keebio/ergodicity/rules.mk index 4a7ff60cbc7..215430b274a 100644 --- a/keyboards/keebio/ergodicity/rules.mk +++ b/keyboards/keebio/ergodicity/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/keebio/tukey/rules.mk b/keyboards/keebio/tukey/rules.mk index 3642bbdb82b..0bf336fe0f7 100644 --- a/keyboards/keebio/tukey/rules.mk +++ b/keyboards/keebio/tukey/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/keebzdotnet/wazowski/rules.mk b/keyboards/keebzdotnet/wazowski/rules.mk index e82d793bcce..15bafda8ebc 100644 --- a/keyboards/keebzdotnet/wazowski/rules.mk +++ b/keyboards/keebzdotnet/wazowski/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk index 6f912dbb809..fe60f513e66 100644 --- a/keyboards/keyhive/maypad/rules.mk +++ b/keyboards/keyhive/maypad/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk index 811be5959a7..806b6355bb4 100644 --- a/keyboards/kingly_keys/romac_plus/rules.mk +++ b/keyboards/kingly_keys/romac_plus/rules.mk @@ -27,6 +27,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable support for EC11 Rotary Encoder OLED_DRIVER_ENABLE = yes # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C diff --git a/keyboards/kira75/rules.mk b/keyboards/kira75/rules.mk index ad3d1a865c1..e6066e58275 100644 --- a/keyboards/kira75/rules.mk +++ b/keyboards/kira75/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk index 36c917fac6c..33e423d3dbd 100644 --- a/keyboards/kmac/rules.mk +++ b/keyboards/kmac/rules.mk @@ -33,7 +33,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Project specific files SRC += matrix.c diff --git a/keyboards/kmini/rules.mk b/keyboards/kmini/rules.mk index 076770a0a05..f40b013f739 100755 --- a/keyboards/kmini/rules.mk +++ b/keyboards/kmini/rules.mk @@ -32,7 +32,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Project specific files SRC = matrix.c diff --git a/keyboards/knops/mini/rules.mk b/keyboards/knops/mini/rules.mk index 1d0be651643..c0abf739e73 100644 --- a/keyboards/knops/mini/rules.mk +++ b/keyboards/knops/mini/rules.mk @@ -24,8 +24,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kudox/rules.mk b/keyboards/kudox/rules.mk index 1b00218c752..bc8b8ae4238 100644 --- a/keyboards/kudox/rules.mk +++ b/keyboards/kudox/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/kudox_game/rules.mk b/keyboards/kudox_game/rules.mk index 63280b38d7a..8f217cde08a 100644 --- a/keyboards/kudox_game/rules.mk +++ b/keyboards/kudox_game/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. DEFAULT_FOLDER = kudox_game/rev2 diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk index 94db629541f..1d6c0d8dacf 100644 --- a/keyboards/kv/revt/rules.mk +++ b/keyboards/kv/revt/rules.mk @@ -19,4 +19,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/kyria/keymaps/drashna/rules.mk b/keyboards/kyria/keymaps/drashna/rules.mk index 756c044fa4e..db75c555f3d 100644 --- a/keyboards/kyria/keymaps/drashna/rules.mk +++ b/keyboards/kyria/keymaps/drashna/rules.mk @@ -14,8 +14,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - BOOTLOADER = atmel-dfu # SPLIT_TRANSPORT = mirror diff --git a/keyboards/kyria/rules.mk b/keyboards/kyria/rules.mk index 65007538b51..61d90c67c15 100644 --- a/keyboards/kyria/rules.mk +++ b/keyboards/kyria/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes # Split common LTO_ENABLE = yes diff --git a/keyboards/lattice60/rules.mk b/keyboards/lattice60/rules.mk index 1547be6a81a..abd97e24b7c 100644 --- a/keyboards/lattice60/rules.mk +++ b/keyboards/lattice60/rules.mk @@ -31,6 +31,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_hhkb diff --git a/keyboards/lazydesigners/the30/rules.mk b/keyboards/lazydesigners/the30/rules.mk index eea30f7ed1d..d8a79f09446 100644 --- a/keyboards/lazydesigners/the30/rules.mk +++ b/keyboards/lazydesigners/the30/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Support community keymaps LAYOUTS = ortho_3x10 diff --git a/keyboards/lets_split/keymaps/bbaserdem_right/rules.mk b/keyboards/lets_split/keymaps/bbaserdem_right/rules.mk index d0b69206105..377a0ded118 100755 --- a/keyboards/lets_split/keymaps/bbaserdem_right/rules.mk +++ b/keyboards/lets_split/keymaps/bbaserdem_right/rules.mk @@ -14,10 +14,8 @@ CONSOLE_ENABLE = no # Allows console output with a command SLEEP_LED_ENABLE = no # Breathes LED's when computer is asleep. Untested. NKRO_ENABLE = no # Default is 6KRO which is plenty MIDI_ENABLE = no # Untested feature -FAUXCLICKY_ENABLE = no # Emulates clicks using speaker KEY_LOCK_ENABLE = no # Allows locking any key. Not used API_SYSEX_ENABLE = no # Allows OS to send signals. KEY_LOCK_ENABLE = no # Allows locking any key. Not used UNICODE_ENABLE = no # Used for unicode character emulation EXTRAKEY_ENABLE = no # OS signals like volume control - diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 996d822f3a1..91d75480378 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -29,7 +29,6 @@ RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode TAP_DANCE_ENABLE = no diff --git a/keyboards/m10a/keymaps/gam3cat/rules.mk b/keyboards/m10a/keymaps/gam3cat/rules.mk index 00515a31e9e..374f5224250 100644 --- a/keyboards/m10a/keymaps/gam3cat/rules.mk +++ b/keyboards/m10a/keymaps/gam3cat/rules.mk @@ -3,7 +3,7 @@ # the appropriate keymap folder that will get included automatically # TAP_DANCE_ENABLE = no # Enable TapDance functionality -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+1500) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) @@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Uses buzzer to emulate clicky switches. By default, uses the C6 pin, same as AUDIO_ENABLE. #VARIABLE_TRACE = no # Use this to debug changes to variable values API_SYSEX_ENABLE = no # This enables using the Quantum SYSEX API to send strings(+5390) KEY_LOCK_ENABLE = no # This enables key lock(+260) diff --git a/keyboards/massdrop/alt/keymaps/reywood/rules.mk b/keyboards/massdrop/alt/keymaps/reywood/rules.mk index fd78df14efa..7e279c182da 100644 --- a/keyboards/massdrop/alt/keymaps/reywood/rules.mk +++ b/keyboards/massdrop/alt/keymaps/reywood/rules.mk @@ -25,7 +25,6 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index 548288f5d34..538df480bd2 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -26,7 +26,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index 1ebd461e87d..970e5a05cd4 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -26,7 +26,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 41c018f875f..99fc1fa853c 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -16,6 +16,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEFAULT_FOLDER = maxipad/promicro diff --git a/keyboards/mc_76k/rules.mk b/keyboards/mc_76k/rules.mk index fb0f7cfd856..b48754e9fc0 100644 --- a/keyboards/mc_76k/rules.mk +++ b/keyboards/mc_76k/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk index 9c7f42ef450..d7754ceb50c 100644 --- a/keyboards/mechkeys/mk60/rules.mk +++ b/keyboards/mechkeys/mk60/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index 698865d3e9f..da4ad3e57c6 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -18,8 +18,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = alice alice_split_bs -DEFAULT_FOLDER = mechlovin/adelais/standard_led/rev2 \ No newline at end of file +DEFAULT_FOLDER = mechlovin/adelais/standard_led/rev2 diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk index f1a818c2ed2..d000eafc62a 100644 --- a/keyboards/mechlovin/hannah910/rev1/rules.mk +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk index a405eda0375..ed8f3223ad7 100644 --- a/keyboards/mechlovin/infinity87/rules.mk +++ b/keyboards/mechlovin/infinity87/rules.mk @@ -19,4 +19,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/mechlovin/infinityce/rules.mk b/keyboards/mechlovin/infinityce/rules.mk index 339e482df32..8a5bd6b42ca 100644 --- a/keyboards/mechlovin/infinityce/rules.mk +++ b/keyboards/mechlovin/infinityce/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/mechlovin/pisces/rules.mk b/keyboards/mechlovin/pisces/rules.mk index d2bf8d3a77e..25f6c2b8b72 100644 --- a/keyboards/mechlovin/pisces/rules.mk +++ b/keyboards/mechlovin/pisces/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/meira/rules.mk b/keyboards/meira/rules.mk index c9949c16920..a932b5b2a7b 100644 --- a/keyboards/meira/rules.mk +++ b/keyboards/meira/rules.mk @@ -27,8 +27,7 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. BACKLIGHT_CUSTOM_DRIVER = yes BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled diff --git a/keyboards/meishi/rules.mk b/keyboards/meishi/rules.mk index 3b27a9be0b0..f00690733f0 100644 --- a/keyboards/meishi/rules.mk +++ b/keyboards/meishi/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/meishi2/rules.mk b/keyboards/meishi2/rules.mk index 77d0f1ec16d..f1d011ad6a0 100644 --- a/keyboards/meishi2/rules.mk +++ b/keyboards/meishi2/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/meme/rules.mk b/keyboards/meme/rules.mk index a076df944a9..344d83b335b 100644 --- a/keyboards/meme/rules.mk +++ b/keyboards/meme/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk index 84ceecb4371..c4bb4533489 100644 --- a/keyboards/meson/rules.mk +++ b/keyboards/meson/rules.mk @@ -30,4 +30,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/miller/gm862/rules.mk b/keyboards/miller/gm862/rules.mk index ed83bd9ac0b..f35c9f40c9d 100644 --- a/keyboards/miller/gm862/rules.mk +++ b/keyboards/miller/gm862/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/miniaxe/rules.mk b/keyboards/miniaxe/rules.mk index 6d9ed783217..216d73438b3 100644 --- a/keyboards/miniaxe/rules.mk +++ b/keyboards/miniaxe/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches DEBUG_ENABLE = no CUSTOM_MATRIX = no # Use custom matrix code diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk index e614f483a97..9948ef0c6ec 100644 --- a/keyboards/minidox/rules.mk +++ b/keyboards/minidox/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/mint60/rules.mk b/keyboards/mint60/rules.mk index d5890941d43..33ddcbb1c19 100644 --- a/keyboards/mint60/rules.mk +++ b/keyboards/mint60/rules.mk @@ -24,11 +24,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/mitosis/keymaps/datagrok/rules.mk b/keyboards/mitosis/keymaps/datagrok/rules.mk index 215e58a7d1a..b69efdf54f3 100644 --- a/keyboards/mitosis/keymaps/datagrok/rules.mk +++ b/keyboards/mitosis/keymaps/datagrok/rules.mk @@ -14,7 +14,6 @@ MITOSIS_DATAGROK_BOTTOMSPACE = no MITOSIS_DATAGROK_SLOWUART = no AUDIO_ENABLE = no # audio output -FAUXCLICKY_ENABLE = no BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) diff --git a/keyboards/montsinger/rebound/rev1/rules.mk b/keyboards/montsinger/rebound/rev1/rules.mk index 8846ef1d15f..20d2a96f126 100644 --- a/keyboards/montsinger/rebound/rev1/rules.mk +++ b/keyboards/montsinger/rebound/rev1/rules.mk @@ -25,7 +25,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_4x12 -LAYOUTS_HAS_RGB = no \ No newline at end of file +LAYOUTS_HAS_RGB = no diff --git a/keyboards/montsinger/rebound/rev2/rules.mk b/keyboards/montsinger/rebound/rev2/rules.mk index 1e950486cc2..040b2de490e 100644 --- a/keyboards/montsinger/rebound/rev2/rules.mk +++ b/keyboards/montsinger/rebound/rev2/rules.mk @@ -25,8 +25,7 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 -LAYOUTS_HAS_RGB = no \ No newline at end of file +LAYOUTS_HAS_RGB = no diff --git a/keyboards/montsinger/rebound/rev3/rules.mk b/keyboards/montsinger/rebound/rev3/rules.mk index 0759709231e..040b2de490e 100644 --- a/keyboards/montsinger/rebound/rev3/rules.mk +++ b/keyboards/montsinger/rebound/rev3/rules.mk @@ -25,9 +25,7 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 LAYOUTS_HAS_RGB = no - diff --git a/keyboards/montsinger/rebound/rev4/rules.mk b/keyboards/montsinger/rebound/rev4/rules.mk index f51017db490..aca9f4c9e46 100644 --- a/keyboards/montsinger/rebound/rev4/rules.mk +++ b/keyboards/montsinger/rebound/rev4/rules.mk @@ -25,7 +25,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 diff --git a/keyboards/montsinger/rewind/rules.mk b/keyboards/montsinger/rewind/rules.mk index a59793d6b42..6a4557aabc7 100644 --- a/keyboards/montsinger/rewind/rules.mk +++ b/keyboards/montsinger/rewind/rules.mk @@ -25,4 +25,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/moon/rules.mk b/keyboards/moon/rules.mk index 9b6b588c668..2878fed9f57 100644 --- a/keyboards/moon/rules.mk +++ b/keyboards/moon/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/mountainblocks/mb17/rules.mk b/keyboards/mountainblocks/mb17/rules.mk index 2ec995cf5f9..38f2485d9c1 100644 --- a/keyboards/mountainblocks/mb17/rules.mk +++ b/keyboards/mountainblocks/mb17/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/murcielago/rev1/rules.mk b/keyboards/murcielago/rev1/rules.mk index b4c2699a414..76f3014ad06 100644 --- a/keyboards/murcielago/rev1/rules.mk +++ b/keyboards/murcielago/rev1/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes # Enable split keyboard mode -ENCODER_ENABLE = yes \ No newline at end of file +ENCODER_ENABLE = yes diff --git a/keyboards/mxss/rules.mk b/keyboards/mxss/rules.mk index ccdca3fbec3..7dc98d4739b 100644 --- a/keyboards/mxss/rules.mk +++ b/keyboards/mxss/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SRC += mxss_frontled.c diff --git a/keyboards/namecard2x4/rules.mk b/keyboards/namecard2x4/rules.mk index fc5476734be..18c3fbbb51b 100644 --- a/keyboards/namecard2x4/rules.mk +++ b/keyboards/namecard2x4/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches #UNICODEMAP_ENABLE = yes # for emoji user #RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips diff --git a/keyboards/navi10/rev0/rules.mk b/keyboards/navi10/rev0/rules.mk index 5fc650a0761..0e11c18497d 100644 --- a/keyboards/navi10/rev0/rules.mk +++ b/keyboards/navi10/rev0/rules.mk @@ -25,8 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/navi10/rev2/rules.mk b/keyboards/navi10/rev2/rules.mk index 5fc650a0761..0e11c18497d 100644 --- a/keyboards/navi10/rev2/rules.mk +++ b/keyboards/navi10/rev2/rules.mk @@ -25,8 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/navi10/rev3/rules.mk b/keyboards/navi10/rev3/rules.mk index bdc59cae9c0..f19b8271638 100644 --- a/keyboards/navi10/rev3/rules.mk +++ b/keyboards/navi10/rev3/rules.mk @@ -25,8 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support +MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/nek_type_a/rules.mk b/keyboards/nek_type_a/rules.mk index e46ea2b8a33..5ee6b11bc17 100644 --- a/keyboards/nek_type_a/rules.mk +++ b/keyboards/nek_type_a/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes DEBUG_ENABLE = yes BLUETOOTH = AdafruitBLE diff --git a/keyboards/nightly_boards/alter/rev1/rules.mk b/keyboards/nightly_boards/alter/rev1/rules.mk index dafed5b012d..740bd3b4393 100644 --- a/keyboards/nightly_boards/alter/rev1/rules.mk +++ b/keyboards/nightly_boards/alter/rev1/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = alice_split_bs diff --git a/keyboards/nightmare/rules.mk b/keyboards/nightmare/rules.mk index dfc402a39fe..2b32bbee922 100644 --- a/keyboards/nightmare/rules.mk +++ b/keyboards/nightmare/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/nomu30/rev1/rules.mk b/keyboards/nomu30/rev1/rules.mk index 3c82bca2463..75a36e6868b 100644 --- a/keyboards/nomu30/rev1/rules.mk +++ b/keyboards/nomu30/rev1/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/nomu30/rev2/rules.mk b/keyboards/nomu30/rev2/rules.mk index bea3a54d18b..6d5fa0b071a 100644 --- a/keyboards/nomu30/rev2/rules.mk +++ b/keyboards/nomu30/rev2/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index 8d6532925a1..ec619bce8cc 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_6x4 diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index 093a7090678..eaf2419bb4d 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto LAYOUTS = 60_ansi 60_iso 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk index 11c8a575bb8..38d215225f6 100644 --- a/keyboards/noxary/268/rules.mk +++ b/keyboards/noxary/268/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index 1533c297720..0d8d9302270 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 65_ansi_blocker diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index 70902339e29..ae01db836a1 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/noxary/x268/rules.mk b/keyboards/noxary/x268/rules.mk index b7e5eb668a4..39f832e2d72 100644 --- a/keyboards/noxary/x268/rules.mk +++ b/keyboards/noxary/x268/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/nullbitsco/nibble/rules.mk b/keyboards/nullbitsco/nibble/rules.mk index 93402140278..ab27b7527a4 100644 --- a/keyboards/nullbitsco/nibble/rules.mk +++ b/keyboards/nullbitsco/nibble/rules.mk @@ -19,10 +19,9 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Use rotary encoder LTO_ENABLE = yes # Link-time optimization -CUSTOM_MATRIX = lite # Lite custom matrix +CUSTOM_MATRIX = lite # Lite custom matrix # Project specific files SRC += matrix.c \ diff --git a/keyboards/oddball/rules.mk b/keyboards/oddball/rules.mk index da21b91c9e6..e9e540c3cab 100644 --- a/keyboards/oddball/rules.mk +++ b/keyboards/oddball/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes POINTING_DEVICE_ENABLE = yes diff --git a/keyboards/ogre/ergo_single/rules.mk b/keyboards/ogre/ergo_single/rules.mk index edff748facf..16b3398cdcc 100644 --- a/keyboards/ogre/ergo_single/rules.mk +++ b/keyboards/ogre/ergo_single/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = no diff --git a/keyboards/ogre/ergo_split/rules.mk b/keyboards/ogre/ergo_split/rules.mk index 8614fadd016..be4d9b1ca38 100644 --- a/keyboards/ogre/ergo_split/rules.mk +++ b/keyboards/ogre/ergo_split/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/ortho5by12/rules.mk b/keyboards/ortho5by12/rules.mk index 17ad792ecdc..21f96ab346b 100644 --- a/keyboards/ortho5by12/rules.mk +++ b/keyboards/ortho5by12/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS_HAS_RGB = no diff --git a/keyboards/otaku_split/rev0/rules.mk b/keyboards/otaku_split/rev0/rules.mk index cdc793b0f7f..9cd4fea5732 100644 --- a/keyboards/otaku_split/rev0/rules.mk +++ b/keyboards/otaku_split/rev0/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD=yes diff --git a/keyboards/otaku_split/rev1/rules.mk b/keyboards/otaku_split/rev1/rules.mk index cdc793b0f7f..9cd4fea5732 100644 --- a/keyboards/otaku_split/rev1/rules.mk +++ b/keyboards/otaku_split/rev1/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD=yes diff --git a/keyboards/pabile/p18/rules.mk b/keyboards/pabile/p18/rules.mk index 9fcdfdb6741..9f59811cce6 100644 --- a/keyboards/pabile/p18/rules.mk +++ b/keyboards/pabile/p18/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = yes # Unicode IOS_DEVICE_ENABLE = no # connect to IOS Device ENCODER_ENABLE = yes diff --git a/keyboards/pabile/p40/rules.mk b/keyboards/pabile/p40/rules.mk index 090983c4079..016fe01725e 100644 --- a/keyboards/pabile/p40/rules.mk +++ b/keyboards/pabile/p40/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI controls BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = yes # Unicode IOS_DEVICE_ENABLE = no # connect to IOS Device diff --git a/keyboards/palette1202/rules.mk b/keyboards/palette1202/rules.mk index 0d79fc49754..70a2f80a5aa 100644 --- a/keyboards/palette1202/rules.mk +++ b/keyboards/palette1202/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable support for rotary encoders OLED_DRIVER_ENABLE = yes # Enable support for OLED display diff --git a/keyboards/panc40/rules.mk b/keyboards/panc40/rules.mk index d40c3e0edb3..3819d14045d 100644 --- a/keyboards/panc40/rules.mk +++ b/keyboards/panc40/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/pdxkbc/rules.mk b/keyboards/pdxkbc/rules.mk index 77d0f1ec16d..f1d011ad6a0 100644 --- a/keyboards/pdxkbc/rules.mk +++ b/keyboards/pdxkbc/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/percent/booster/rules.mk b/keyboards/percent/booster/rules.mk index 2aa4320673d..fca9ff3cfc2 100644 --- a/keyboards/percent/booster/rules.mk +++ b/keyboards/percent/booster/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EXTRAFLAGS += -flto LAYOUTS = numpad_5x4 diff --git a/keyboards/pico/rules.mk b/keyboards/pico/rules.mk index 0e044b676ba..0d41e849439 100644 --- a/keyboards/pico/rules.mk +++ b/keyboards/pico/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/planck/keymaps/priyadi/rules.mk b/keyboards/planck/keymaps/priyadi/rules.mk index 17617b0b7cb..1ce96968bca 100644 --- a/keyboards/planck/keymaps/priyadi/rules.mk +++ b/keyboards/planck/keymaps/priyadi/rules.mk @@ -1,5 +1,5 @@ # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) @@ -12,11 +12,10 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes # Unicode map BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. API_SYSEX_ENABLE = no ifeq ($(strip $(KEYBOARD)), planck/rev4) -FAUXCLICKY_ENABLE = yes BACKLIGHT_ENABLE = yes AUDIO_ENABLE = no endif @@ -27,4 +26,3 @@ endif # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/primekb/prime_l/rules.mk b/keyboards/primekb/prime_l/rules.mk index bd4e9b28ce5..7a3f60d5726 100644 --- a/keyboards/primekb/prime_l/rules.mk +++ b/keyboards/primekb/prime_l/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -DEFAULT_FOLDER = primekb/prime_l/v1 \ No newline at end of file +DEFAULT_FOLDER = primekb/prime_l/v1 diff --git a/keyboards/primekb/prime_m/rules.mk b/keyboards/primekb/prime_m/rules.mk index c0ece238a47..a2e427b6714 100644 --- a/keyboards/primekb/prime_m/rules.mk +++ b/keyboards/primekb/prime_m/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = ortho_5x6 numpad_5x6 diff --git a/keyboards/primekb/prime_o/rules.mk b/keyboards/primekb/prime_o/rules.mk index 2097c25dc58..7143eb4c0a4 100644 --- a/keyboards/primekb/prime_o/rules.mk +++ b/keyboards/primekb/prime_o/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/projectkb/alice/rev1/rules.mk b/keyboards/projectkb/alice/rev1/rules.mk index aea9f17ac39..4e0b8b15e54 100644 --- a/keyboards/projectkb/alice/rev1/rules.mk +++ b/keyboards/projectkb/alice/rev1/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches WS2812_DRIVER = spi diff --git a/keyboards/projectkb/alice/rev2/rules.mk b/keyboards/projectkb/alice/rev2/rules.mk index aea9f17ac39..4e0b8b15e54 100644 --- a/keyboards/projectkb/alice/rev2/rules.mk +++ b/keyboards/projectkb/alice/rev2/rules.mk @@ -18,7 +18,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches WS2812_DRIVER = spi diff --git a/keyboards/quad_h/lb75/rules.mk b/keyboards/quad_h/lb75/rules.mk index f4f03c7d9e3..059b04aa341 100644 --- a/keyboards/quad_h/lb75/rules.mk +++ b/keyboards/quad_h/lb75/rules.mk @@ -28,5 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches - diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk index fba77a1bc08..79eeb7d24c1 100644 --- a/keyboards/quantrik/kyuu/rules.mk +++ b/keyboards/quantrik/kyuu/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/rabbit/rabbit68/rules.mk b/keyboards/rabbit/rabbit68/rules.mk index d6d8587416d..462c0158548 100644 --- a/keyboards/rabbit/rabbit68/rules.mk +++ b/keyboards/rabbit/rabbit68/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/rart/rart67/rules.mk b/keyboards/rart/rart67/rules.mk index abf2696c3d3..a61e71724b7 100644 --- a/keyboards/rart/rart67/rules.mk +++ b/keyboards/rart/rart67/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/rart/rart75/rules.mk b/keyboards/rart/rart75/rules.mk index e5128449a9a..94adcd5a483 100644 --- a/keyboards/rart/rart75/rules.mk +++ b/keyboards/rart/rart75/rules.mk @@ -29,6 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes - diff --git a/keyboards/redox/rules.mk b/keyboards/redox/rules.mk index 7e91f235364..20bd73632d0 100644 --- a/keyboards/redox/rules.mk +++ b/keyboards/redox/rules.mk @@ -28,8 +28,7 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/redscarf_i/rules.mk b/keyboards/redscarf_i/rules.mk index ef09cd189ca..852aec83b45 100644 --- a/keyboards/redscarf_i/rules.mk +++ b/keyboards/redscarf_i/rules.mk @@ -26,7 +26,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode LAYOUTS = ortho_5x4 ortho_6x4 numpad_5x4 numpad_6x4 diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index 404807e86c6..7b8012db7d3 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index 34aad4239e2..45c7197560c 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk index 730951b7b24..648af8126d0 100644 --- a/keyboards/redscarf_iiplus/verd/rules.mk +++ b/keyboards/redscarf_iiplus/verd/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk index 89af053dbba..ec3c2b0c358 100644 --- a/keyboards/retro_75/rules.mk +++ b/keyboards/retro_75/rules.mk @@ -18,4 +18,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/reversestudio/decadepad/rules.mk b/keyboards/reversestudio/decadepad/rules.mk index 35ec60f5791..65dbf490150 100644 --- a/keyboards/reversestudio/decadepad/rules.mk +++ b/keyboards/reversestudio/decadepad/rules.mk @@ -22,16 +22,15 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = yes # Unicode # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -LAYOUTS = numpad_6x4 \ No newline at end of file +LAYOUTS = numpad_6x4 diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk index 1487925bb66..085fb294fe1 100755 --- a/keyboards/reviung34/rules.mk +++ b/keyboards/reviung34/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/reviung39/rules.mk b/keyboards/reviung39/rules.mk index 1487925bb66..085fb294fe1 100644 --- a/keyboards/reviung39/rules.mk +++ b/keyboards/reviung39/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/reviung41/rules.mk b/keyboards/reviung41/rules.mk index edee7940cc6..b68c5963b49 100644 --- a/keyboards/reviung41/rules.mk +++ b/keyboards/reviung41/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/rgbkb/zygomorph/rules.mk b/keyboards/rgbkb/zygomorph/rules.mk index fac2e784ff7..8a9bdf3ec41 100644 --- a/keyboards/rgbkb/zygomorph/rules.mk +++ b/keyboards/rgbkb/zygomorph/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGB_MATRIX_DRIVER = WS2812 SPLIT_KEYBOARD = yes diff --git a/keyboards/rotr/rules.mk b/keyboards/rotr/rules.mk index 18d378ed7c6..38e08de7a09 100644 --- a/keyboards/rotr/rules.mk +++ b/keyboards/rotr/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enables Rotary Encoder support diff --git a/keyboards/runner3680/rules.mk b/keyboards/runner3680/rules.mk index 1b7499c074a..f071b7a161d 100644 --- a/keyboards/runner3680/rules.mk +++ b/keyboards/runner3680/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes # Enables split keyboard support diff --git a/keyboards/s7_elephant/rev2/rules.mk b/keyboards/s7_elephant/rev2/rules.mk index cbf45a2b9be..381040642c1 100644 --- a/keyboards/s7_elephant/rev2/rules.mk +++ b/keyboards/s7_elephant/rev2/rules.mk @@ -29,5 +29,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/scarletbandana/rules.mk b/keyboards/scarletbandana/rules.mk index 32ff3a078bf..2410b2c42c5 100644 --- a/keyboards/scarletbandana/rules.mk +++ b/keyboards/scarletbandana/rules.mk @@ -28,6 +28,5 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera EXTRAFLAGS += -flto diff --git a/keyboards/sck/m0116b/rules.mk b/keyboards/sck/m0116b/rules.mk index c97360b576f..0507ad0b13d 100644 --- a/keyboards/sck/m0116b/rules.mk +++ b/keyboards/sck/m0116b/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/sck/neiso/rules.mk b/keyboards/sck/neiso/rules.mk index a480f1f832e..6d27e303206 100644 --- a/keyboards/sck/neiso/rules.mk +++ b/keyboards/sck/neiso/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index 0faf76e7ae6..e291c08bff0 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = alice alice_split_bs diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index c327fc3ac8a..8efc79ef215 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -29,8 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes # Use shared split_common RGBLIGHT_SPLIT = yes - diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk index 8d93d390d2a..576ae3cf6a7 100644 --- a/keyboards/sentraq/number_pad/rules.mk +++ b/keyboards/sentraq/number_pad/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/shambles/rules.mk b/keyboards/shambles/rules.mk index 46138bafdce..890de1ffed0 100644 --- a/keyboards/shambles/rules.mk +++ b/keyboards/shambles/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/shiro/rules.mk b/keyboards/shiro/rules.mk index 7854599db89..b828d7c361d 100644 --- a/keyboards/shiro/rules.mk +++ b/keyboards/shiro/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/sidderskb/majbritt/rules.mk b/keyboards/sidderskb/majbritt/rules.mk index b842278bb7c..812c710645d 100644 --- a/keyboards/sidderskb/majbritt/rules.mk +++ b/keyboards/sidderskb/majbritt/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/silverbullet44/rules.mk b/keyboards/silverbullet44/rules.mk index d6a09479663..cdcbc76fa6c 100644 --- a/keyboards/silverbullet44/rules.mk +++ b/keyboards/silverbullet44/rules.mk @@ -31,6 +31,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port B6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes LTO_ENABLE = yes diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index 45c73d75be2..ce0e621c34f 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # Use RGB bottom light LAYOUTS = 60_ansi 60_hhkb 60_iso diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index 8425f62bb13..e99f18fe5d7 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -29,6 +29,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = numpad_6x4 diff --git a/keyboards/spacetime/rules.mk b/keyboards/spacetime/rules.mk index e2158fb15cf..bc48e121c37 100644 --- a/keyboards/spacetime/rules.mk +++ b/keyboards/spacetime/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches OLED_DRIVER_ENABLE = no # Enable generic behavior for split boards diff --git a/keyboards/splitreus62/rules.mk b/keyboards/splitreus62/rules.mk index 1549a10cc05..bc2b6a11536 100644 --- a/keyboards/splitreus62/rules.mk +++ b/keyboards/splitreus62/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI controls BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/squiggle/rev1/rules.mk b/keyboards/squiggle/rev1/rules.mk index 45309a896e7..71d218e25ed 100644 --- a/keyboards/squiggle/rev1/rules.mk +++ b/keyboards/squiggle/rev1/rules.mk @@ -17,7 +17,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index 59ce4d7e208..b0bcf9c1471 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -28,5 +28,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes # Enable RGB underlighting support diff --git a/keyboards/staryu/rules.mk b/keyboards/staryu/rules.mk index 6032c5deca4..83b6ceaece6 100755 --- a/keyboards/staryu/rules.mk +++ b/keyboards/staryu/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index 593ff2d3dba..706d6464e25 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches OLED_DRIVER_ENABLE = yes SPLIT_KEYBOARD = no diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk index e9818c59cb5..2a9da62ac03 100644 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ b/keyboards/switchplate/southpaw_65/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/switchplate/southpaw_fullsize/rules.mk b/keyboards/switchplate/southpaw_fullsize/rules.mk index 021099d6f4b..bd1eea3033d 100644 --- a/keyboards/switchplate/southpaw_fullsize/rules.mk +++ b/keyboards/switchplate/southpaw_fullsize/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk index f0c66680132..a7c3cf1e357 100755 --- a/keyboards/tada68/rules.mk +++ b/keyboards/tada68/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/tg4x/rules.mk b/keyboards/tg4x/rules.mk index 866fc58fd94..967eab5b7d0 100644 --- a/keyboards/tg4x/rules.mk +++ b/keyboards/tg4x/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/the_royal/liminal/rules.mk b/keyboards/the_royal/liminal/rules.mk index 0f05ebc3d08..bb00fdfa088 100644 --- a/keyboards/the_royal/liminal/rules.mk +++ b/keyboards/the_royal/liminal/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/thedogkeyboard/rules.mk b/keyboards/thedogkeyboard/rules.mk index 70420fd361f..1f8491e8d22 100644 --- a/keyboards/thedogkeyboard/rules.mk +++ b/keyboards/thedogkeyboard/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/tkc/osav2/rules.mk b/keyboards/tkc/osav2/rules.mk index 6a6f28d4957..7185a632cfb 100644 --- a/keyboards/tkc/osav2/rules.mk +++ b/keyboards/tkc/osav2/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # Reduces compile size LAYOUTS = alice alice_split_bs diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk index aae95314e8d..2809f82b4d4 100644 --- a/keyboards/tmo50/rules.mk +++ b/keyboards/tmo50/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/tr60w/rules.mk b/keyboards/tr60w/rules.mk index 07a540c301d..86b60bd1ef1 100644 --- a/keyboards/tr60w/rules.mk +++ b/keyboards/tr60w/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk index 39af991a62f..262ad0a61ef 100644 --- a/keyboards/treadstone48/rules.mk +++ b/keyboards/treadstone48/rules.mk @@ -26,7 +26,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/treasure/type9/rules.mk b/keyboards/treasure/type9/rules.mk index a45ccd94d7c..eb8aef7e742 100644 --- a/keyboards/treasure/type9/rules.mk +++ b/keyboards/treasure/type9/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ua62/rules.mk b/keyboards/ua62/rules.mk index 7c5512b6584..78fed46336a 100644 --- a/keyboards/ua62/rules.mk +++ b/keyboards/ua62/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/uranuma/rules.mk b/keyboards/uranuma/rules.mk index 9f06db70cac..8f3b2c52f66 100644 --- a/keyboards/uranuma/rules.mk +++ b/keyboards/uranuma/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches #COMBO_ENABLE = yes #SRC += .nicola.c \ diff --git a/keyboards/ut472/keymaps/tucznak/rules.mk b/keyboards/ut472/keymaps/tucznak/rules.mk index 112b769841d..1c04eb7a22e 100644 --- a/keyboards/ut472/keymaps/tucznak/rules.mk +++ b/keyboards/ut472/keymaps/tucznak/rules.mk @@ -14,5 +14,4 @@ MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index ef114faa1f1..caf4c1c877b 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = yes TAP_DANCE_ENABLE = no # Enable tap dance feature diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 16ecb7df47e..66602272450 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes diff --git a/keyboards/wallaby/rules.mk b/keyboards/wallaby/rules.mk index 1cec2845622..653fcdb380b 100644 --- a/keyboards/wallaby/rules.mk +++ b/keyboards/wallaby/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi diff --git a/keyboards/westfoxtrot/cyclops/rules.mk b/keyboards/westfoxtrot/cyclops/rules.mk index 6f062970b97..7be886618e8 100644 --- a/keyboards/westfoxtrot/cyclops/rules.mk +++ b/keyboards/westfoxtrot/cyclops/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/westfoxtrot/cypher/rev1/rules.mk b/keyboards/westfoxtrot/cypher/rev1/rules.mk index 4b0dc19ae79..b4d51c2af6a 100644 --- a/keyboards/westfoxtrot/cypher/rev1/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev1/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/westfoxtrot/cypher/rev5/rules.mk b/keyboards/westfoxtrot/cypher/rev5/rules.mk index 813f51cd959..57c2f68995e 100644 --- a/keyboards/westfoxtrot/cypher/rev5/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev5/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wheatfield/blocked65/rules.mk b/keyboards/wheatfield/blocked65/rules.mk index b3671d9ea84..7151e5e5efe 100644 --- a/keyboards/wheatfield/blocked65/rules.mk +++ b/keyboards/wheatfield/blocked65/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI controls BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi_blocker diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk index 5ccb9456adb..8b7a0c7f0be 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk index 5bda0f51a44..735d2a24ae4 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches CIE1931_CURVE = yes # project specific files diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt60_a/rules.mk +++ b/keyboards/wilba_tech/wt60_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk index 6e5ad12f8dd..05abcb68fb9 100644 --- a/keyboards/wilba_tech/wt60_d/rules.mk +++ b/keyboards/wilba_tech/wt60_d/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wilba_tech/wt60_xt/rules.mk b/keyboards/wilba_tech/wt60_xt/rules.mk index a272caf2d12..0e522ba5bfa 100644 --- a/keyboards/wilba_tech/wt60_xt/rules.mk +++ b/keyboards/wilba_tech/wt60_xt/rules.mk @@ -28,4 +28,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = yes # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt65_a/rules.mk +++ b/keyboards/wilba_tech/wt65_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt65_b/rules.mk +++ b/keyboards/wilba_tech/wt65_b/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk index a9ce761ca4d..98e4472d188 100644 --- a/keyboards/wilba_tech/wt69_a/rules.mk +++ b/keyboards/wilba_tech/wt69_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt75_a/rules.mk +++ b/keyboards/wilba_tech/wt75_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt75_b/rules.mk +++ b/keyboards/wilba_tech/wt75_b/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt75_c/rules.mk +++ b/keyboards/wilba_tech/wt75_c/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk index 53177bf165a..a0f923a2f3b 100644 --- a/keyboards/wilba_tech/wt80_a/rules.mk +++ b/keyboards/wilba_tech/wt80_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = drivers/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt80_bc/rules.mk b/keyboards/wilba_tech/wt80_bc/rules.mk index 4aa749422c4..0b6b9254a37 100644 --- a/keyboards/wilba_tech/wt80_bc/rules.mk +++ b/keyboards/wilba_tech/wt80_bc/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk index a9ce761ca4d..98e4472d188 100644 --- a/keyboards/wilba_tech/wt8_a/rules.mk +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -28,7 +28,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wolfmarkclub/wm1/rules.mk b/keyboards/wolfmarkclub/wm1/rules.mk index d0a9f226601..85aa84f69ad 100644 --- a/keyboards/wolfmarkclub/wm1/rules.mk +++ b/keyboards/wolfmarkclub/wm1/rules.mk @@ -25,7 +25,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/wsk/gothic50/rules.mk b/keyboards/wsk/gothic50/rules.mk index ee4f3b1a30f..268690e3c66 100644 --- a/keyboards/wsk/gothic50/rules.mk +++ b/keyboards/wsk/gothic50/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wsk/gothic70/rules.mk b/keyboards/wsk/gothic70/rules.mk index ee4f3b1a30f..268690e3c66 100644 --- a/keyboards/wsk/gothic70/rules.mk +++ b/keyboards/wsk/gothic70/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/wsk/tkl30/rules.mk b/keyboards/wsk/tkl30/rules.mk index 49bc458d591..689894be282 100644 --- a/keyboards/wsk/tkl30/rules.mk +++ b/keyboards/wsk/tkl30/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/x16/rules.mk b/keyboards/x16/rules.mk index 23ddc43142f..bf4c2e9070b 100644 --- a/keyboards/x16/rules.mk +++ b/keyboards/x16/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/xbows/knight/rules.mk b/keyboards/xbows/knight/rules.mk index 3b18ea46968..4c608012970 100644 --- a/keyboards/xbows/knight/rules.mk +++ b/keyboards/xbows/knight/rules.mk @@ -28,6 +28,5 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/xd002/rules.mk b/keyboards/xd002/rules.mk index ed51953c7f7..595743a3033 100644 --- a/keyboards/xd002/rules.mk +++ b/keyboards/xd002/rules.mk @@ -24,7 +24,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Save as much space as we can... LTO_ENABLE = yes diff --git a/keyboards/xd68/rules.mk b/keyboards/xd68/rules.mk index acab5aae50f..49653923d6a 100644 --- a/keyboards/xd68/rules.mk +++ b/keyboards/xd68/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_ansi_split_bs 65_iso diff --git a/keyboards/xd84/rules.mk b/keyboards/xd84/rules.mk index b857c29a9c7..3ec65b8ec2f 100644 --- a/keyboards/xd84/rules.mk +++ b/keyboards/xd84/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/xd87/rules.mk b/keyboards/xd87/rules.mk index 8927a07a123..abd7a41bb5c 100644 --- a/keyboards/xd87/rules.mk +++ b/keyboards/xd87/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # Supported layouts LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/xd96/rules.mk b/keyboards/xd96/rules.mk index 9d2cd1d1f91..d880fa65fe6 100644 --- a/keyboards/xd96/rules.mk +++ b/keyboards/xd96/rules.mk @@ -29,7 +29,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk index 3ac5f9977d0..64b6615e81e 100644 --- a/keyboards/xelus/dawn60/rev1/rules.mk +++ b/keyboards/xelus/dawn60/rev1/rules.mk @@ -33,7 +33,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow CIE1931_CURVE = yes @@ -46,4 +45,4 @@ SRC += keyboards/wilba_tech/wt_main.c \ drivers/issi/is31fl3731.c \ ws2812.c -QUANTUM_LIB_SRC += i2c_master.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/xelus/snap96/rules.mk b/keyboards/xelus/snap96/rules.mk index a52c97b2d52..2c033042bc5 100644 --- a/keyboards/xelus/snap96/rules.mk +++ b/keyboards/xelus/snap96/rules.mk @@ -28,6 +28,4 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow - diff --git a/keyboards/yatara/drink_me/rules.mk b/keyboards/yatara/drink_me/rules.mk index 990a9079458..d432712bdfc 100644 --- a/keyboards/yatara/drink_me/rules.mk +++ b/keyboards/yatara/drink_me/rules.mk @@ -28,4 +28,3 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 7a5062a7032..d6763bc75f4 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -28,7 +28,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_ansi_tsangan 60_hhkb 60_iso 60_iso_split_bs_rshift 60_iso_tsangan diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk index e6f094ed981..e8ec4ea08b9 100644 --- a/keyboards/yd68/rules.mk +++ b/keyboards/yd68/rules.mk @@ -29,4 +29,3 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/ymdk/ymd09/rules.mk b/keyboards/ymdk/ymd09/rules.mk index 519c23099c9..88f2897b79d 100644 --- a/keyboards/ymdk/ymd09/rules.mk +++ b/keyboards/ymdk/ymd09/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LTO_ENABLE = yes # reduce firmware size diff --git a/keyboards/yncognito/batpad/rules.mk b/keyboards/yncognito/batpad/rules.mk index 7f5fd08084e..4abf1b6fcfb 100644 --- a/keyboards/yncognito/batpad/rules.mk +++ b/keyboards/yncognito/batpad/rules.mk @@ -30,7 +30,6 @@ MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches # generated by KBFirmware JSON to QMK Parser # https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/yurei/rules.mk b/keyboards/yurei/rules.mk index 1b81d052b6b..734460c7101 100644 --- a/keyboards/yurei/rules.mk +++ b/keyboards/yurei/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = tkl_ansi diff --git a/keyboards/yushakobo/quick7/rules.mk b/keyboards/yushakobo/quick7/rules.mk index e0de6f28fb3..75e07106b66 100644 --- a/keyboards/yushakobo/quick7/rules.mk +++ b/keyboards/yushakobo/quick7/rules.mk @@ -28,6 +28,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches ENCODER_ENABLE = yes # Enable support for Rotary Encoder diff --git a/keyboards/zfrontier/big_switch/rules.mk b/keyboards/zfrontier/big_switch/rules.mk index abec407f6ad..ce4a8286e66 100644 --- a/keyboards/zfrontier/big_switch/rules.mk +++ b/keyboards/zfrontier/big_switch/rules.mk @@ -28,5 +28,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches TAP_DANCE_ENABLE = no diff --git a/keyboards/zvecr/split_blackpill/rules.mk b/keyboards/zvecr/split_blackpill/rules.mk index 822dd246dc6..8ba870e18f4 100644 --- a/keyboards/zvecr/split_blackpill/rules.mk +++ b/keyboards/zvecr/split_blackpill/rules.mk @@ -21,7 +21,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes SERIAL_DRIVER = usart diff --git a/keyboards/zvecr/zv48/rules.mk b/keyboards/zvecr/zv48/rules.mk index d725f9cb11c..86bcad8a0c8 100644 --- a/keyboards/zvecr/zv48/rules.mk +++ b/keyboards/zvecr/zv48/rules.mk @@ -17,7 +17,6 @@ ENCODER_ENABLE = yes # Enable rotary encoder support MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches SPLIT_KEYBOARD = yes SERIAL_DRIVER = usart diff --git a/quantum/fauxclicky.c b/quantum/fauxclicky.c deleted file mode 100644 index 53499c9c1ec..00000000000 --- a/quantum/fauxclicky.c +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2017 Priyadi Iman Nurcahyo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include "timer.h" -#include "fauxclicky.h" -#include -#include "musical_notes.h" - -bool fauxclicky_enabled = true; -uint16_t note_start = 0; -bool note_playing = false; -uint16_t note_period = 0; - -void fauxclicky_init() { - // Set port PC6 (OC3A and /OC4A) as output - DDRC |= _BV(PORTC6); - - // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers - TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30); - TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30); -} - -void fauxclicky_stop() { - FAUXCLICKY_DISABLE_OUTPUT; - note_playing = false; -} - -void fauxclicky_play(float note[]) { - if (!fauxclicky_enabled) return; - if (note_playing) fauxclicky_stop(); - FAUXCLICKY_TIMER_PERIOD = (uint16_t)(((float)F_CPU) / (note[0] * (float)FAUXCLICKY_CPU_PRESCALER)); - FAUXCLICKY_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (note[0] * (float)FAUXCLICKY_CPU_PRESCALER)) / (float)2); - note_playing = true; - note_period = (note[1] / (float)16) * ((float)60 / (float)FAUXCLICKY_TEMPO) * 1000; - note_start = timer_read(); - FAUXCLICKY_ENABLE_OUTPUT; -} - -void fauxclicky_check() { - if (!note_playing) return; - - if (timer_elapsed(note_start) > note_period) { - fauxclicky_stop(); - } -} diff --git a/quantum/fauxclicky.h b/quantum/fauxclicky.h deleted file mode 100644 index ed54d0edcf9..00000000000 --- a/quantum/fauxclicky.h +++ /dev/null @@ -1,97 +0,0 @@ -/* -Copyright 2017 Priyadi Iman Nurcahyo - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifdef AUDIO_ENABLE -# error "AUDIO_ENABLE and FAUXCLICKY_ENABLE cannot be both enabled" -#endif - -#include "musical_notes.h" -#include - -__attribute__((weak)) float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_D4, 0.25); -__attribute__((weak)) float fauxclicky_released_note[2] = MUSICAL_NOTE(_C4, 0.125); -__attribute__((weak)) float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C4, 0.25); - -extern bool fauxclicky_enabled; - -// -// tempo in BPM -// - -#ifndef FAUXCLICKY_TEMPO -# define FAUXCLICKY_TEMPO TEMPO_DEFAULT -#endif - -// beep on press -#define FAUXCLICKY_ACTION_PRESS fauxclicky_play(fauxclicky_pressed_note) - -// beep on release -#define FAUXCLICKY_ACTION_RELEASE fauxclicky_play(fauxclicky_released_note) - -// general purpose beep -#define FAUXCLICKY_BEEP fauxclicky_play(fauxclicky_beep_note) - -// enable -#define FAUXCLICKY_ON fauxclicky_enabled = true - -// disable -#define FAUXCLICKY_OFF \ - do { \ - fauxclicky_enabled = false; \ - fauxclicky_stop(); \ - } while (0) - -// toggle -#define FAUXCLICKY_TOGGLE \ - do { \ - if (fauxclicky_enabled) { \ - FAUXCLICKY_OFF; \ - } else { \ - FAUXCLICKY_ON; \ - } \ - } while (0) - -// -// pin configuration -// - -#ifndef FAUXCLICKY_CPU_PRESCALER -# define FAUXCLICKY_CPU_PRESCALER 8 -#endif - -#ifndef FAUXCLICKY_ENABLE_OUTPUT -# define FAUXCLICKY_ENABLE_OUTPUT TCCR3A |= _BV(COM3A1) -#endif - -#ifndef FAUXCLICKY_DISABLE_OUTPUT -# define FAUXCLICKY_DISABLE_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0)) -#endif - -#ifndef FAUXCLICKY_TIMER_PERIOD -# define FAUXCLICKY_TIMER_PERIOD ICR3 -#endif - -#ifndef FAUXCLICKY_DUTY_CYCLE -# define FAUXCLICKY_DUTY_CYCLE OCR3A -#endif - -// -// definitions -// - -void fauxclicky_init(void); -void fauxclicky_stop(void); -void fauxclicky_play(float note[2]); -void fauxclicky_check(void); diff --git a/quantum/quantum.c b/quantum/quantum.c index 8ae487bec2b..6d202c515c4 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -25,10 +25,6 @@ # include "backlight.h" #endif -#ifdef FAUXCLICKY_ENABLE -# include "fauxclicky.h" -#endif - #ifdef API_ENABLE # include "api.h" #endif @@ -310,17 +306,6 @@ bool process_record_quantum(keyrecord_t *record) { case EEPROM_RESET: eeconfig_init(); return false; -#ifdef FAUXCLICKY_ENABLE - case FC_TOG: - FAUXCLICKY_TOGGLE; - return false; - case FC_ON: - FAUXCLICKY_ON; - return false; - case FC_OFF: - FAUXCLICKY_OFF; - return false; -#endif #ifdef VELOCIKEY_ENABLE case VLK_TOG: velocikey_toggle(); diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index 0160c5586d3..e0f5dbc61e3 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -150,13 +150,6 @@ enum quantum_keycodes { CLICKY_DOWN, CLICKY_RESET, -#ifdef FAUXCLICKY_ENABLE - // Faux clicky - FC_ON, - FC_OFF, - FC_TOG, -#endif - // Music mode on/off/toggle MU_ON, MU_OFF, @@ -717,6 +710,9 @@ enum quantum_keycodes { #define CK_DOWN CLICKY_DOWN #define CK_ON CLICKY_ENABLE #define CK_OFF CLICKY_DISABLE +#define FC_ON CLICKY_ENABLE +#define FC_OFF CLICKY_DISABLE +#define FC_TOGG CLICKY_TOGGLE #define RGB_MOD RGB_MODE_FORWARD #define RGB_RMOD RGB_MODE_REVERSE diff --git a/show_options.mk b/show_options.mk index df3d0395712..958fbf891cb 100644 --- a/show_options.mk +++ b/show_options.mk @@ -26,7 +26,6 @@ HARDWARE_OPTION_NAMES = \ MIDI_ENABLE \ BLUETOOTH_ENABLE \ AUDIO_ENABLE \ - FAUXCLICKY_ENABLE \ HD44780_ENABLE \ ENCODER_ENABLE \ LCD_ENABLE \ diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index ef01a717767..e4a97e0bc1a 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -47,10 +47,6 @@ int tp_buttons; int retro_tapping_counter = 0; #endif -#ifdef FAUXCLICKY_ENABLE -# include "fauxclicky.h" -#endif - #ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY __attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { return false; } #endif @@ -80,16 +76,6 @@ void action_exec(keyevent_t event) { #endif } -#ifdef FAUXCLICKY_ENABLE - if (IS_PRESSED(event)) { - FAUXCLICKY_ACTION_PRESS; - } - if (IS_RELEASED(event)) { - FAUXCLICKY_ACTION_RELEASE; - } - fauxclicky_check(); -#endif - #ifdef SWAP_HANDS_ENABLE if (!IS_NOEVENT(event)) { process_hand_swap(&event); diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 40989ca4c6d..a6bde9df850 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -60,9 +60,6 @@ along with this program. If not, see . #ifdef STENO_ENABLE # include "process_steno.h" #endif -#ifdef FAUXCLICKY_ENABLE -# include "fauxclicky.h" -#endif #ifdef SERIAL_LINK_ENABLE # include "serial_link/system/serial_link.h" #endif @@ -312,9 +309,6 @@ void keyboard_init(void) { #ifdef STENO_ENABLE steno_init(); #endif -#ifdef FAUXCLICKY_ENABLE - fauxclicky_init(); -#endif #ifdef POINTING_DEVICE_ENABLE pointing_device_init(); #endif diff --git a/users/bbaserdem/rules.mk b/users/bbaserdem/rules.mk index 24c98fdc9f1..94f01cdffca 100644 --- a/users/bbaserdem/rules.mk +++ b/users/bbaserdem/rules.mk @@ -6,7 +6,7 @@ UNICODE_ENABLE = yes # Used for unicode character emulation EXTRAKEY_ENABLE = yes # OS signals like volume control # DISABLE -ifndef BLUETOOTH_ENABLE +ifndef BLUETOOTH_ENABLE BLUETOOTH_ENABLE = no # No bluetooth endif COMMAND_ENABLE = no # Some bootmagic thing i dont use @@ -15,7 +15,6 @@ CONSOLE_ENABLE = no # Allows console output with a command SLEEP_LED_ENABLE = no # Breathes LED's when computer is asleep. Untested. NKRO_ENABLE = no # Default is 6KRO which is plenty MIDI_ENABLE = no # Untested feature -FAUXCLICKY_ENABLE = no # Emulates clicks using speaker KEY_LOCK_ENABLE = no # Allows locking any key. Not used API_SYSEX_ENABLE = no # Allows OS to send signals. KEY_LOCK_ENABLE = no # Allows locking any key. Not used diff --git a/users/bcat/rules.mk b/users/bcat/rules.mk index f87974ed96f..3442a78ac23 100644 --- a/users/bcat/rules.mk +++ b/users/bcat/rules.mk @@ -23,7 +23,6 @@ MOUSEKEY_ENABLE = no TERMINAL_ENABLE = no # Disable unused hardware options on all keyboards. -FAUXCLICKY_ENABLE = no MIDI_ENABLE = no SLEEP_LED_ENABLE = no diff --git a/users/drashna/readme_keycodes.md b/users/drashna/readme_keycodes.md index f5e6fb271ef..af4dd54bc0f 100644 --- a/users/drashna/readme_keycodes.md +++ b/users/drashna/readme_keycodes.md @@ -5,6 +5,6 @@ Keycodes are defined in the drashna.h file and need to be included in the keymap A bunch of macros are present and are only included on boards that are not the Ergodox EZ or Orthodox, as they are not needed for those boards. -Included is a custom macro for compiling my keyboards. This includes the bootloader target (`:teensy`, `:avrdude`, or `:dfu`), and keeps RGBLIGHT, AUDIO and/or FAUXCLICKY enabled, if it previously was (regardless of the rules file). +Included is a custom macro for compiling my keyboards. This includes the bootloader target (`:teensy`, `:avrdude`, or `:dfu`), and keeps RGBLIGHT, AUDIO enabled, if it previously was (regardless of the rules file). This also includes a modified RESET keycode as well, that sets the underglow to red. diff --git a/users/romus/rules.mk b/users/romus/rules.mk index 78ce2e93f45..12bbabb020b 100644 --- a/users/romus/rules.mk +++ b/users/romus/rules.mk @@ -6,7 +6,7 @@ UNICODE_ENABLE = yes # Used for unicode character emulation EXTRAKEY_ENABLE = yes # OS signals like volume control # DISABLE -ifndef BLUETOOTH_ENABLE +ifndef BLUETOOTH_ENABLE BLUETOOTH_ENABLE = no # No bluetooth endif COMMAND_ENABLE = no # Some bootmagic thing i dont use @@ -15,7 +15,6 @@ CONSOLE_ENABLE = no # Allows console output with a command SLEEP_LED_ENABLE = no # Breathes LED's when computer is asleep. Untested. NKRO_ENABLE = no # Default is 6KRO which is plenty MIDI_ENABLE = no # Untested feature -FAUXCLICKY_ENABLE = no # Emulates clicks using speaker KEY_LOCK_ENABLE = no # Allows locking any key. Not used API_SYSEX_ENABLE = no # Allows OS to send signals. From cd336b2b545798269405e8ffef0fe8958d4d27d4 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 13 Feb 2021 10:26:45 -0800 Subject: [PATCH 120/145] bump to python 3.7 (#11408) --- lib/python/qmk/cli/__init__.py | 22 ++++++++++++++++++++-- util/install/gentoo.sh | 2 +- util/install/opensuse.sh | 31 ------------------------------- util/install/sabayon.sh | 15 --------------- util/qmk_install.sh | 8 ++------ 5 files changed, 23 insertions(+), 55 deletions(-) delete mode 100755 util/install/opensuse.sh delete mode 100755 util/install/sabayon.sh diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 1732287da0d..a5f1f476791 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -27,6 +27,24 @@ from . import new from . import pyformat from . import pytest -if sys.version_info[0] != 3 or sys.version_info[1] < 6: - cli.log.error('Your Python is too old! Please upgrade to Python 3.6 or later.') +# Supported version information +# +# Based on the OSes we support these are the minimum python version available by default. +# Last update: 2021 Jan 02 +# +# Arch: 3.9 +# Debian: 3.7 +# Fedora 31: 3.7 +# Fedora 32: 3.8 +# Fedora 33: 3.9 +# FreeBSD: 3.7 +# Gentoo: 3.7 +# macOS: 3.9 (from homebrew) +# msys2: 3.8 +# Slackware: 3.7 +# solus: 3.7 +# void: 3.9 + +if sys.version_info[0] != 3 or sys.version_info[1] < 7: + cli.log.error('Your Python is too old! Please upgrade to Python 3.7 or later.') exit(127) diff --git a/util/install/gentoo.sh b/util/install/gentoo.sh index d4284e9a934..97eb5df07f6 100755 --- a/util/install/gentoo.sh +++ b/util/install/gentoo.sh @@ -23,7 +23,7 @@ _qmk_install() { sudo emerge -auN sys-devel/gcc sudo emerge -au --noreplace \ app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang sys-devel/crossdev \ - \>=dev-lang/python-3.6 \ + \>=dev-lang/python-3.7 \ dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr diff --git a/util/install/opensuse.sh b/util/install/opensuse.sh deleted file mode 100755 index 47b44ae3644..00000000000 --- a/util/install/opensuse.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/bash - -_qmk_install_prepare() { - case $(grep ID /etc/os-release) in - *15.1*) - REPO_RELEASE=Leap_15.1;; - *15.2*) - REPO_RELEASE=Leap_15.2;; - *) - #REPO_RELEASE=Tumbleweed;; - echo "ERROR: Tumbleweed is currently not supported." - exit 1 - esac - - sudo zypper addrepo https://download.opensuse.org/repositories/devel:gcc/openSUSE_$REPO_RELEASE/devel:gcc.repo - sudo zypper addrepo https://download.opensuse.org/repositories/hardware/openSUSE_$REPO_RELEASE/hardware.repo - sudo zypper --gpg-auto-import-keys refresh -} - -_qmk_install() { - echo "Installing dependencies" - - sudo zypper install -y \ - make clang gcc unzip wget zip \ - python3-pip \ - cross-avr-binutils cross-avr-gcc8 avr-libc \ - cross-arm-binutils cross-arm-none-gcc8 cross-arm-none-newlib-devel \ - avrdude dfu-programmer dfu-util - - python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt -} diff --git a/util/install/sabayon.sh b/util/install/sabayon.sh deleted file mode 100755 index fd4f4d8dfd0..00000000000 --- a/util/install/sabayon.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/bash - -_qmk_install() { - echo "Installing dependencies" - - sudo equo install \ - app-arch/unzip app-arch/zip net-misc/wget dev-vcs/git sys-devel/clang sys-devel/gcc sys-devel/crossdev \ - dev-python/pip \ - dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util - - sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr - sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi - - python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt -} diff --git a/util/qmk_install.sh b/util/qmk_install.sh index 5076e980a23..421a91a999e 100755 --- a/util/qmk_install.sh +++ b/util/qmk_install.sh @@ -25,10 +25,6 @@ case $(uname -a) in . "$QMK_FIRMWARE_UTIL_DIR/install/fedora.sh";; *gentoo*) . "$QMK_FIRMWARE_UTIL_DIR/install/gentoo.sh";; - *opensuse*|*tumbleweed*) - . "$QMK_FIRMWARE_UTIL_DIR/install/opensuse.sh";; - *sabayon*) - . "$QMK_FIRMWARE_UTIL_DIR/install/sabayon.sh";; *slackware*) . "$QMK_FIRMWARE_UTIL_DIR/install/slackware.sh";; *solus*) @@ -36,9 +32,9 @@ case $(uname -a) in *void*) . "$QMK_FIRMWARE_UTIL_DIR/install/void.sh";; *) - echo "Sorry, we don't recognize your distribution. Help us by contributing support!" + echo "Sorry, we don't recognize your distribution. Try using the docker image instead:" echo - echo "https://docs.qmk.fm/#/contributing" + echo "https://docs.qmk.fm/#/getting_started_docker" exit 1;; esac From 1f2fe2eab99548f4bde2a79b03e3303cc9b73214 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 14 Feb 2021 01:44:22 +0000 Subject: [PATCH 121/145] Refactor platform logic within print.h (#11863) * Remove GCC check from debug * Remove platform logic from common.mk * Refactor platform logic within print.h * restore debug.c format * headers * Rename function pointer type * review comments * Update tmk_core/common/printf.c Co-authored-by: Nick Brassel * Format Co-authored-by: Nick Brassel --- tmk_core/common.mk | 19 +- .../common/{print.c => arm_atsam/_print.h} | 33 +- tmk_core/common/arm_atsam/printf.c | 6 +- tmk_core/common/arm_atsam/printf.mk | 1 + tmk_core/common/avr/_print.h | 33 ++ tmk_core/common/avr/printf.c | 20 ++ tmk_core/common/avr/printf.mk | 2 + tmk_core/common/debug.c | 41 +-- tmk_core/common/keyboard.c | 1 + tmk_core/common/lib_printf.mk | 9 + tmk_core/common/print.h | 297 +++++------------- tmk_core/common/printf.c | 27 ++ tmk_core/common/progmem.h | 1 + tmk_core/common/sendchar.h | 2 + tmk_core/protocol/chibios/usb_main.c | 7 - tmk_core/protocol/lufa/lufa.c | 1 - tmk_core/protocol/vusb/main.c | 7 +- 17 files changed, 224 insertions(+), 283 deletions(-) rename tmk_core/common/{print.c => arm_atsam/_print.h} (71%) create mode 100644 tmk_core/common/arm_atsam/printf.mk create mode 100644 tmk_core/common/avr/_print.h create mode 100644 tmk_core/common/avr/printf.c create mode 100644 tmk_core/common/avr/printf.mk create mode 100644 tmk_core/common/lib_printf.mk create mode 100644 tmk_core/common/printf.c diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 3cf3edde35d..238b3c69fd5 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -1,5 +1,3 @@ -PRINTF_PATH = $(LIB_PATH)/printf - COMMON_DIR = common PLATFORM_COMMON_DIR = $(COMMON_DIR)/$(PLATFORM_KEY) @@ -10,7 +8,6 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \ $(COMMON_DIR)/action_macro.c \ $(COMMON_DIR)/action_layer.c \ $(COMMON_DIR)/action_util.c \ - $(COMMON_DIR)/print.c \ $(COMMON_DIR)/debug.c \ $(COMMON_DIR)/sendchar_null.c \ $(COMMON_DIR)/eeconfig.c \ @@ -20,17 +17,11 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \ $(COMMON_DIR)/sync_timer.c \ $(PLATFORM_COMMON_DIR)/bootloader.c \ -ifeq ($(PLATFORM),AVR) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S -else ifeq ($(PLATFORM),CHIBIOS) - TMK_COMMON_SRC += $(PRINTF_PATH)/printf.c - TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_FLOAT - TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_EXPONENTIAL - TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_LONG_LONG - TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_PTRDIFF_T - VPATH += $(PRINTF_PATH) -else ifeq ($(PLATFORM),ARM_ATSAM) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c +# Use platform provided print - fall back to lib/printf +ifneq ("$(wildcard $(TMK_PATH)/$(PLATFORM_COMMON_DIR)/printf.mk)","") + include $(TMK_PATH)/$(PLATFORM_COMMON_DIR)/printf.mk +else + include $(TMK_PATH)/$(COMMON_DIR)/lib_printf.mk endif # Option modules diff --git a/tmk_core/common/print.c b/tmk_core/common/arm_atsam/_print.h similarity index 71% rename from tmk_core/common/print.c rename to tmk_core/common/arm_atsam/_print.h index 07aef0b0eb2..a774f5d8d2c 100644 --- a/tmk_core/common/print.c +++ b/tmk_core/common/arm_atsam/_print.h @@ -1,4 +1,4 @@ -/* Copyright 2012,2013 Jun Wako */ +/* Copyright 2012 Jun Wako */ /* Very basic print functions, intended to be used with usb_debug_only.c * http://www.pjrc.com/teensy/ * Copyright (c) 2008 PJRC.COM, LLC @@ -21,27 +21,14 @@ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ +#pragma once -#include -#include "print.h" +#include "arm_atsam/printf.h" -#ifndef NO_PRINT - -# if defined(__AVR__) - -# define sendchar(c) xputc(c) - -void print_set_sendchar(int8_t (*sendchar_func)(uint8_t)) { xdev_out(sendchar_func); } - -# elif defined(PROTOCOL_CHIBIOS) /* __AVR__ */ - -// don't need anything extra - -# elif defined(__arm__) /* __AVR__ */ - -// TODO -// void print_set_sendchar(int8_t (*sendchar_func)(uint8_t)) { } - -# endif /* __AVR__ */ - -#endif +// Create user & normal print defines +#define xprintf(fmt, ...) __xprintf(fmt, ##__VA_ARGS__) +#define print(s) xprintf(s) +#define println(s) xprintf(s "\r\n") +#define uprint(s) print(s) +#define uprintln(s) println(s) +#define uprintf(fmt, ...) xprintf(fmt, ##__VA_ARGS__) diff --git a/tmk_core/common/arm_atsam/printf.c b/tmk_core/common/arm_atsam/printf.c index cd7cdb52e68..2cb59706a85 100644 --- a/tmk_core/common/arm_atsam/printf.c +++ b/tmk_core/common/arm_atsam/printf.c @@ -15,11 +15,13 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#include "printf.h" +#include "sendchar.h" + #ifdef CONSOLE_ENABLE # include "samd51j18a.h" # include "arm_atsam_protocol.h" -# include "printf.h" # include # include @@ -66,3 +68,5 @@ void console_printf(char *fmt, ...) { } #endif // CONSOLE_ENABLE + +void print_set_sendchar(sendchar_func_t send) {} \ No newline at end of file diff --git a/tmk_core/common/arm_atsam/printf.mk b/tmk_core/common/arm_atsam/printf.mk new file mode 100644 index 00000000000..f70e02731fb --- /dev/null +++ b/tmk_core/common/arm_atsam/printf.mk @@ -0,0 +1 @@ +TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c diff --git a/tmk_core/common/avr/_print.h b/tmk_core/common/avr/_print.h new file mode 100644 index 00000000000..f9b79bdf85e --- /dev/null +++ b/tmk_core/common/avr/_print.h @@ -0,0 +1,33 @@ +/* Copyright 2012 Jun Wako */ +/* Very basic print functions, intended to be used with usb_debug_only.c + * http://www.pjrc.com/teensy/ + * Copyright (c) 2008 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#pragma once + +#include "avr/xprintf.h" + +// Create user & normal print defines +#define print(s) xputs(PSTR(s)) +#define println(s) xputs(PSTR(s "\r\n")) +#define uprint(s) print(s) +#define uprintln(s) println(s) +#define uprintf(fmt, ...) xprintf(fmt, ##__VA_ARGS__) \ No newline at end of file diff --git a/tmk_core/common/avr/printf.c b/tmk_core/common/avr/printf.c new file mode 100644 index 00000000000..9ad7a38693c --- /dev/null +++ b/tmk_core/common/avr/printf.c @@ -0,0 +1,20 @@ +/* +Copyright 2011 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "xprintf.h" +#include "sendchar.h" + +void print_set_sendchar(sendchar_func_t func) { xdev_out(func); } diff --git a/tmk_core/common/avr/printf.mk b/tmk_core/common/avr/printf.mk new file mode 100644 index 00000000000..060ad88c57c --- /dev/null +++ b/tmk_core/common/avr/printf.mk @@ -0,0 +1,2 @@ +TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S +TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c diff --git a/tmk_core/common/debug.c b/tmk_core/common/debug.c index bea96dfc14a..ea62deaa8cc 100644 --- a/tmk_core/common/debug.c +++ b/tmk_core/common/debug.c @@ -1,24 +1,25 @@ -#include +/* +Copyright 2011 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #include "debug.h" -#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) - debug_config_t debug_config = { -/* GCC Bug 10676 - Using unnamed fields in initializers - * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 */ -#if GCC_VERSION >= 40600 - .enable = false, - .matrix = false, - .keyboard = false, - .mouse = false, - .reserved = 0 -#else - { - false, // .enable - false, // .matrix - false, // .keyboard - false, // .mouse - 0 // .reserved - } -#endif + .enable = false, // + .matrix = false, // + .keyboard = false, // + .mouse = false, // + .reserved = 0 // }; diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index a6bde9df850..299bda2c127 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -229,6 +229,7 @@ void keyboard_setup(void) { #ifndef NO_JTAG_DISABLE disable_jtag(); #endif + print_set_sendchar(sendchar); matrix_setup(); keyboard_pre_init_kb(); } diff --git a/tmk_core/common/lib_printf.mk b/tmk_core/common/lib_printf.mk new file mode 100644 index 00000000000..10d2d8468d9 --- /dev/null +++ b/tmk_core/common/lib_printf.mk @@ -0,0 +1,9 @@ +PRINTF_PATH = $(LIB_PATH)/printf + +TMK_COMMON_SRC += $(PRINTF_PATH)/printf.c +TMK_COMMON_SRC += $(COMMON_DIR)/printf.c +TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_FLOAT +TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_EXPONENTIAL +TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_LONG_LONG +TMK_COMMON_DEFS += -DPRINTF_DISABLE_SUPPORT_PTRDIFF_T +VPATH += $(PRINTF_PATH) diff --git a/tmk_core/common/print.h b/tmk_core/common/print.h index 35fcad0f404..48f91e63429 100644 --- a/tmk_core/common/print.h +++ b/tmk_core/common/print.h @@ -27,104 +27,76 @@ #include #include #include "util.h" +#include "sendchar.h" +#include "progmem.h" -#if defined(PROTOCOL_CHIBIOS) || defined(PROTOCOL_ARM_ATSAM) -# define PSTR(x) x -#endif +void print_set_sendchar(sendchar_func_t func); #ifndef NO_PRINT - -# if defined(__AVR__) /* __AVR__ */ - -# include "avr/xprintf.h" - -# ifdef USER_PRINT /* USER_PRINT */ - -// Remove normal print defines -# define print(s) -# define println(s) -# undef xprintf -# define xprintf(fmt, ...) - -// Create user print defines -# define uprint(s) xputs(PSTR(s)) -# define uprintln(s) xputs(PSTR(s "\r\n")) -# define uprintf(fmt, ...) __xprintf(PSTR(fmt), ##__VA_ARGS__) - -# else /* NORMAL PRINT */ - -// Create user & normal print defines -# define print(s) xputs(PSTR(s)) -# define println(s) xputs(PSTR(s "\r\n")) -# define uprint(s) print(s) -# define uprintln(s) println(s) -# define uprintf(fmt, ...) xprintf(fmt, ##__VA_ARGS__) - -# endif /* USER_PRINT / NORMAL PRINT */ - -# ifdef __cplusplus -extern "C" -# endif - - /* function pointer of sendchar to be used by print utility */ - void print_set_sendchar(int8_t (*print_sendchar_func)(uint8_t)); - -# elif defined(PROTOCOL_CHIBIOS) /* PROTOCOL_CHIBIOS */ - +# if __has_include_next("_print.h") +# include_next "_print.h" /* Include the platforms print.h */ +# else +// Fall back to lib/printf # include "printf.h" // lib/printf/printf.h -# ifdef USER_PRINT /* USER_PRINT */ - -// Remove normal print defines -# define print(s) -# define println(s) -# define xprintf(fmt, ...) - -// Create user print defines -# define uprint(s) printf(s) -# define uprintln(s) printf(s "\r\n") -# define uprintf printf - -# else /* NORMAL PRINT */ // Create user & normal print defines -# define print(s) printf(s) -# define println(s) printf(s "\r\n") -# define xprintf printf -# define uprint(s) printf(s) -# define uprintln(s) printf(s "\r\n") -# define uprintf printf - -# endif /* USER_PRINT / NORMAL PRINT */ - -# elif defined(PROTOCOL_ARM_ATSAM) /* PROTOCOL_ARM_ATSAM */ - -# include "arm_atsam/printf.h" - -# ifdef USER_PRINT /* USER_PRINT */ - -// Remove normal print defines -# define print(s) -# define println(s) -# define xprintf(fmt, ...) - -// Create user print defines -# define uprintf(fmt, ...) __xprintf(fmt, ##__VA_ARGS__) -# define uprint(s) xprintf(s) -# define uprintln(s) xprintf(s "\r\n") - -# else /* NORMAL PRINT */ - -// Create user & normal print defines -# define xprintf(fmt, ...) __xprintf(fmt, ##__VA_ARGS__) -# define print(s) xprintf(s) -# define println(s) xprintf(s "\r\n") -# define uprint(s) print(s) -# define uprintln(s) println(s) -# define uprintf(fmt, ...) xprintf(fmt, ##__VA_ARGS__) - -# endif /* USER_PRINT / NORMAL PRINT */ +# define print(s) printf(s) +# define println(s) printf(s "\r\n") +# define xprintf printf +# define uprint(s) printf(s) +# define uprintln(s) printf(s "\r\n") +# define uprintf printf # endif /* __AVR__ / PROTOCOL_CHIBIOS / PROTOCOL_ARM_ATSAM */ +#else /* NO_PRINT */ +# undef xprintf +// Remove print defines +# define print(s) +# define println(s) +# define xprintf(fmt, ...) +# define uprintf(fmt, ...) +# define uprint(s) +# define uprintln(s) + +#endif /* NO_PRINT */ + +#ifdef USER_PRINT +// Remove normal print defines +# undef print +# undef println +# undef xprintf +# define print(s) +# define println(s) +# define xprintf(fmt, ...) +#endif + +#define print_dec(i) xprintf("%u", i) +#define print_decs(i) xprintf("%d", i) +/* hex */ +#define print_hex4(i) xprintf("%X", i) +#define print_hex8(i) xprintf("%02X", i) +#define print_hex16(i) xprintf("%04X", i) +#define print_hex32(i) xprintf("%08lX", i) +/* binary */ +#define print_bin4(i) xprintf("%04b", i) +#define print_bin8(i) xprintf("%08b", i) +#define print_bin16(i) xprintf("%016b", i) +#define print_bin32(i) xprintf("%032lb", i) +#define print_bin_reverse8(i) xprintf("%08b", bitrev(i)) +#define print_bin_reverse16(i) xprintf("%016b", bitrev16(i)) +#define print_bin_reverse32(i) xprintf("%032lb", bitrev32(i)) +/* print value utility */ +#define print_val_dec(v) xprintf(#v ": %u\n", v) +#define print_val_decs(v) xprintf(#v ": %d\n", v) +#define print_val_hex8(v) xprintf(#v ": %X\n", v) +#define print_val_hex16(v) xprintf(#v ": %02X\n", v) +#define print_val_hex32(v) xprintf(#v ": %04lX\n", v) +#define print_val_bin8(v) xprintf(#v ": %08b\n", v) +#define print_val_bin16(v) xprintf(#v ": %016b\n", v) +#define print_val_bin32(v) xprintf(#v ": %032lb\n", v) +#define print_val_bin_reverse8(v) xprintf(#v ": %08b\n", bitrev(v)) +#define print_val_bin_reverse16(v) xprintf(#v ": %016b\n", bitrev16(v)) +#define print_val_bin_reverse32(v) xprintf(#v ": %032lb\n", bitrev32(v)) // User print disables the normal print messages in the body of QMK/TMK code and // is meant as a lightweight alternative to NOPRINT. Use it when you only want to do @@ -132,129 +104,32 @@ extern "C" // print (and store their wasteful strings). // // !!! DO NOT USE USER PRINT CALLS IN THE BODY OF QMK/TMK !!! -// -# ifdef USER_PRINT - -// Disable normal print -# define print_dec(data) -# define print_decs(data) -# define print_hex4(data) -# define print_hex8(data) -# define print_hex16(data) -# define print_hex32(data) -# define print_bin4(data) -# define print_bin8(data) -# define print_bin16(data) -# define print_bin32(data) -# define print_bin_reverse8(data) -# define print_bin_reverse16(data) -# define print_bin_reverse32(data) -# define print_val_dec(v) -# define print_val_decs(v) -# define print_val_hex8(v) -# define print_val_hex16(v) -# define print_val_hex32(v) -# define print_val_bin8(v) -# define print_val_bin16(v) -# define print_val_bin32(v) -# define print_val_bin_reverse8(v) -# define print_val_bin_reverse16(v) -# define print_val_bin_reverse32(v) - -# else /* NORMAL_PRINT */ - -// Enable normal print -/* decimal */ -# define print_dec(i) xprintf("%u", i) -# define print_decs(i) xprintf("%d", i) -/* hex */ -# define print_hex4(i) xprintf("%X", i) -# define print_hex8(i) xprintf("%02X", i) -# define print_hex16(i) xprintf("%04X", i) -# define print_hex32(i) xprintf("%08lX", i) -/* binary */ -# define print_bin4(i) xprintf("%04b", i) -# define print_bin8(i) xprintf("%08b", i) -# define print_bin16(i) xprintf("%016b", i) -# define print_bin32(i) xprintf("%032lb", i) -# define print_bin_reverse8(i) xprintf("%08b", bitrev(i)) -# define print_bin_reverse16(i) xprintf("%016b", bitrev16(i)) -# define print_bin_reverse32(i) xprintf("%032lb", bitrev32(i)) -/* print value utility */ -# define print_val_dec(v) xprintf(# v ": %u\n", v) -# define print_val_decs(v) xprintf(# v ": %d\n", v) -# define print_val_hex8(v) xprintf(# v ": %X\n", v) -# define print_val_hex16(v) xprintf(# v ": %02X\n", v) -# define print_val_hex32(v) xprintf(# v ": %04lX\n", v) -# define print_val_bin8(v) xprintf(# v ": %08b\n", v) -# define print_val_bin16(v) xprintf(# v ": %016b\n", v) -# define print_val_bin32(v) xprintf(# v ": %032lb\n", v) -# define print_val_bin_reverse8(v) xprintf(# v ": %08b\n", bitrev(v)) -# define print_val_bin_reverse16(v) xprintf(# v ": %016b\n", bitrev16(v)) -# define print_val_bin_reverse32(v) xprintf(# v ": %032lb\n", bitrev32(v)) - -# endif /* USER_PRINT / NORMAL_PRINT */ - -// User Print /* decimal */ -# define uprint_dec(i) uprintf("%u", i) -# define uprint_decs(i) uprintf("%d", i) +#define uprint_dec(i) uprintf("%u", i) +#define uprint_decs(i) uprintf("%d", i) /* hex */ -# define uprint_hex4(i) uprintf("%X", i) -# define uprint_hex8(i) uprintf("%02X", i) -# define uprint_hex16(i) uprintf("%04X", i) -# define uprint_hex32(i) uprintf("%08lX", i) +#define uprint_hex4(i) uprintf("%X", i) +#define uprint_hex8(i) uprintf("%02X", i) +#define uprint_hex16(i) uprintf("%04X", i) +#define uprint_hex32(i) uprintf("%08lX", i) /* binary */ -# define uprint_bin4(i) uprintf("%04b", i) -# define uprint_bin8(i) uprintf("%08b", i) -# define uprint_bin16(i) uprintf("%016b", i) -# define uprint_bin32(i) uprintf("%032lb", i) -# define uprint_bin_reverse8(i) uprintf("%08b", bitrev(i)) -# define uprint_bin_reverse16(i) uprintf("%016b", bitrev16(i)) -# define uprint_bin_reverse32(i) uprintf("%032lb", bitrev32(i)) +#define uprint_bin4(i) uprintf("%04b", i) +#define uprint_bin8(i) uprintf("%08b", i) +#define uprint_bin16(i) uprintf("%016b", i) +#define uprint_bin32(i) uprintf("%032lb", i) +#define uprint_bin_reverse8(i) uprintf("%08b", bitrev(i)) +#define uprint_bin_reverse16(i) uprintf("%016b", bitrev16(i)) +#define uprint_bin_reverse32(i) uprintf("%032lb", bitrev32(i)) /* print value utility */ -# define uprint_val_dec(v) uprintf(# v ": %u\n", v) -# define uprint_val_decs(v) uprintf(# v ": %d\n", v) -# define uprint_val_hex8(v) uprintf(# v ": %X\n", v) -# define uprint_val_hex16(v) uprintf(# v ": %02X\n", v) -# define uprint_val_hex32(v) uprintf(# v ": %04lX\n", v) -# define uprint_val_bin8(v) uprintf(# v ": %08b\n", v) -# define uprint_val_bin16(v) uprintf(# v ": %016b\n", v) -# define uprint_val_bin32(v) uprintf(# v ": %032lb\n", v) -# define uprint_val_bin_reverse8(v) uprintf(# v ": %08b\n", bitrev(v)) -# define uprint_val_bin_reverse16(v) uprintf(# v ": %016b\n", bitrev16(v)) -# define uprint_val_bin_reverse32(v) uprintf(# v ": %032lb\n", bitrev32(v)) - -#else /* NO_PRINT */ - -# define xprintf(fmt, ...) -# define print(s) -# define println(s) -# define print_set_sendchar(func) -# define print_dec(data) -# define print_decs(data) -# define print_hex4(data) -# define print_hex8(data) -# define print_hex16(data) -# define print_hex32(data) -# define print_bin4(data) -# define print_bin8(data) -# define print_bin16(data) -# define print_bin32(data) -# define print_bin_reverse8(data) -# define print_bin_reverse16(data) -# define print_bin_reverse32(data) -# define print_val_dec(v) -# define print_val_decs(v) -# define print_val_hex8(v) -# define print_val_hex16(v) -# define print_val_hex32(v) -# define print_val_bin8(v) -# define print_val_bin16(v) -# define print_val_bin32(v) -# define print_val_bin_reverse8(v) -# define print_val_bin_reverse16(v) -# define print_val_bin_reverse32(v) - -#endif /* NO_PRINT */ +#define uprint_val_dec(v) uprintf(#v ": %u\n", v) +#define uprint_val_decs(v) uprintf(#v ": %d\n", v) +#define uprint_val_hex8(v) uprintf(#v ": %X\n", v) +#define uprint_val_hex16(v) uprintf(#v ": %02X\n", v) +#define uprint_val_hex32(v) uprintf(#v ": %04lX\n", v) +#define uprint_val_bin8(v) uprintf(#v ": %08b\n", v) +#define uprint_val_bin16(v) uprintf(#v ": %016b\n", v) +#define uprint_val_bin32(v) uprintf(#v ": %032lb\n", v) +#define uprint_val_bin_reverse8(v) uprintf(#v ": %08b\n", bitrev(v)) +#define uprint_val_bin_reverse16(v) uprintf(#v ": %016b\n", bitrev16(v)) +#define uprint_val_bin_reverse32(v) uprintf(#v ": %032lb\n", bitrev32(v)) diff --git a/tmk_core/common/printf.c b/tmk_core/common/printf.c new file mode 100644 index 00000000000..e8440e55ee5 --- /dev/null +++ b/tmk_core/common/printf.c @@ -0,0 +1,27 @@ +/* +Copyright 2011 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include "sendchar.h" + +// bind lib/printf to console interface - sendchar + +static int8_t null_sendchar_func(uint8_t c) { return 0; } +static sendchar_func_t func = null_sendchar_func; + +void print_set_sendchar(sendchar_func_t send) { func = send; } + +void _putchar(char character) { func(character); } diff --git a/tmk_core/common/progmem.h b/tmk_core/common/progmem.h index c8863d3ad2b..4e4771e5238 100644 --- a/tmk_core/common/progmem.h +++ b/tmk_core/common/progmem.h @@ -4,6 +4,7 @@ # include #else # define PROGMEM +# define PSTR(x) x # define PGM_P const char* # define memcpy_P(dest, src, n) memcpy(dest, src, n) # define pgm_read_byte(address_short) *((uint8_t*)(address_short)) diff --git a/tmk_core/common/sendchar.h b/tmk_core/common/sendchar.h index b150dd464ef..edcddaa6bb9 100644 --- a/tmk_core/common/sendchar.h +++ b/tmk_core/common/sendchar.h @@ -23,6 +23,8 @@ along with this program. If not, see . extern "C" { #endif +typedef int8_t (*sendchar_func_t)(uint8_t c); + /* transmit a character. return 0 on success, -1 on error. */ int8_t sendchar(uint8_t c); diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index 13b1e34d282..4c088e2b5bf 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -953,15 +953,8 @@ void console_task(void) { } while (size > 0); } -#else /* CONSOLE_ENABLE */ -int8_t sendchar(uint8_t c) { - (void)c; - return 0; -} #endif /* CONSOLE_ENABLE */ -void _putchar(char character) { sendchar(character); } - #ifdef RAW_ENABLE void raw_hid_send(uint8_t *data, uint8_t length) { // TODO: implement variable size packet diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 74e48222d0c..bd9daaac903 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1025,7 +1025,6 @@ static void setup_usb(void) { // for Console_Task USB_Device_EnableSOFEvents(); - print_set_sendchar(sendchar); } /** \brief Main diff --git a/tmk_core/protocol/vusb/main.c b/tmk_core/protocol/vusb/main.c index 2e8bb2fbbc7..3f93ef6d24f 100644 --- a/tmk_core/protocol/vusb/main.c +++ b/tmk_core/protocol/vusb/main.c @@ -74,12 +74,7 @@ static void usb_remote_wakeup(void) { * * FIXME: Needs doc */ -static void setup_usb(void) { - initForUsbConnectivity(); - - // for Console_Task - print_set_sendchar(sendchar); -} +static void setup_usb(void) { initForUsbConnectivity(); } /** \brief Main * From 557cfecc15cdf066d5228e95006f9753d6d87ee6 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sun, 14 Feb 2021 21:41:03 +1100 Subject: [PATCH 122/145] ChibiOS conf upgrade for keebio/dsp40/rev1 (#11846) --- keyboards/keebio/dsp40/rev1/chconf.h | 729 +------------------------- keyboards/keebio/dsp40/rev1/halconf.h | 536 +------------------ keyboards/keebio/dsp40/rev1/mcuconf.h | 184 +------ 3 files changed, 65 insertions(+), 1384 deletions(-) diff --git a/keyboards/keebio/dsp40/rev1/chconf.h b/keyboards/keebio/dsp40/rev1/chconf.h index 03f63da36a8..ad2c4b2d645 100644 --- a/keyboards/keebio/dsp40/rev1/chconf.h +++ b/keyboards/keebio/dsp40/rev1/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/keebio/dsp40/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/keebio/dsp40/rev1/halconf.h b/keyboards/keebio/dsp40/rev1/halconf.h index ff5ae7e8a5f..4078ba8fdaf 100644 --- a/keyboards/keebio/dsp40/rev1/halconf.h +++ b/keyboards/keebio/dsp40/rev1/halconf.h @@ -1,525 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/keebio/dsp40/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#include_next -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/keebio/dsp40/rev1/mcuconf.h b/keyboards/keebio/dsp40/rev1/mcuconf.h index 0e49478c8b0..49ce9062a32 100644 --- a/keyboards/keebio/dsp40/rev1/mcuconf.h +++ b/keyboards/keebio/dsp40/rev1/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/keebio/dsp40/rev1/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ From 4ddb5abea51251c6f76c272724984f77f0596f90 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 14 Feb 2021 19:51:07 +0000 Subject: [PATCH 123/145] [CI] Format develop (#11893) --- .github/workflows/format.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index d7347bea985..201f3c230fb 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -4,6 +4,7 @@ on: push: branches: - master + - develop jobs: format: @@ -14,6 +15,8 @@ jobs: if: github.repository == 'qmk/qmk_firmware' steps: + - uses: rlespinasse/github-slug-action@v3.x + - uses: actions/checkout@v2 with: token: ${{ secrets.API_TOKEN_GITHUB }} @@ -37,6 +40,7 @@ jobs: uses: peter-evans/create-pull-request@v3 with: delete-branch: true + branch: bugfix/format_${{ env.GITHUB_REF_SLUG }} author: QMK Bot committer: QMK Bot commit-message: Format code according to conventions From c27a778281824423a324d04276d291f06b49b1ae Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Mon, 15 Feb 2021 06:55:43 +1100 Subject: [PATCH 124/145] Format code according to conventions (#11905) Co-authored-by: QMK Bot --- drivers/chibios/uart.c | 15 +++------------ quantum/audio/audio_chibios.c | 18 +++++++++--------- tmk_core/common/avr/bootloader.c | 8 ++++---- tmk_core/protocol/arm_atsam/main_arm_atsam.c | 1 - tmk_core/protocol/chibios/usb_main.c | 2 +- 5 files changed, 17 insertions(+), 27 deletions(-) diff --git a/drivers/chibios/uart.c b/drivers/chibios/uart.c index 6e94899b9d6..030335b342f 100644 --- a/drivers/chibios/uart.c +++ b/drivers/chibios/uart.c @@ -18,12 +18,7 @@ #include "quantum.h" -static SerialConfig serialConfig = { - SERIAL_DEFAULT_BITRATE, - SD1_CR1, - SD1_CR2, - SD1_CR3 -}; +static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3}; void uart_init(uint32_t baud) { static bool is_initialised = false; @@ -44,9 +39,7 @@ void uart_init(uint32_t baud) { } } -void uart_putchar(uint8_t c) { - sdPut(&SERIAL_DRIVER, c); -} +void uart_putchar(uint8_t c) { sdPut(&SERIAL_DRIVER, c); } uint8_t uart_getchar(void) { msg_t res = sdGet(&SERIAL_DRIVER); @@ -54,6 +47,4 @@ uint8_t uart_getchar(void) { return (uint8_t)res; } -bool uart_available(void) { - return !sdGetWouldBlock(&SERIAL_DRIVER); -} +bool uart_available(void) { return !sdGetWouldBlock(&SERIAL_DRIVER); } diff --git a/quantum/audio/audio_chibios.c b/quantum/audio/audio_chibios.c index dddb8f13578..b267e574633 100644 --- a/quantum/audio/audio_chibios.c +++ b/quantum/audio/audio_chibios.c @@ -84,23 +84,23 @@ static void gpt_cb8(GPTDriver *gptp); # define DAC_SAMPLE_MAX 65535U #endif -#define START_CHANNEL_1() \ - gptStart(&GPTD6, &gpt6cfg1); \ +#define START_CHANNEL_1() \ + gptStart(&GPTD6, &gpt6cfg1); \ gptStartContinuous(&GPTD6, 2U); \ palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG) -#define START_CHANNEL_2() \ - gptStart(&GPTD7, &gpt7cfg1); \ +#define START_CHANNEL_2() \ + gptStart(&GPTD7, &gpt7cfg1); \ gptStartContinuous(&GPTD7, 2U); \ palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG) -#define STOP_CHANNEL_1() \ - gptStopTimer(&GPTD6); \ +#define STOP_CHANNEL_1() \ + gptStopTimer(&GPTD6); \ palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL); \ palSetPad(GPIOA, 4) -#define STOP_CHANNEL_2() \ - gptStopTimer(&GPTD7); \ +#define STOP_CHANNEL_2() \ + gptStopTimer(&GPTD7); \ palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); \ palSetPad(GPIOA, 5) - #define RESTART_CHANNEL_1() \ +#define RESTART_CHANNEL_1() \ STOP_CHANNEL_1(); \ START_CHANNEL_1() #define RESTART_CHANNEL_2() \ diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index 4e3a27022dc..c0272903b83 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -237,13 +237,13 @@ __attribute__((weak)) void bootloader_jump(void) { "bootloader_startup_loop%=: \n\t" "rjmp bootloader_startup_loop%= \n\t" : - : [ mcucsrio ] "I"(_SFR_IO_ADDR(MCUCSR)), + : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), # if (FLASHEND > 131071) - [ ramendhi ] "M"(((RAMEND - 2) >> 8) & 0xff), [ ramendlo ] "M"(((RAMEND - 2) >> 0) & 0xff), [ bootaddrhi ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), + [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), # else - [ ramendhi ] "M"(((RAMEND - 1) >> 8) & 0xff), [ ramendlo ] "M"(((RAMEND - 1) >> 0) & 0xff), + [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), # endif - [ bootaddrme ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [ bootaddrlo ] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); + [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); #else // Assume remaining boards are DFU, even if the flag isn't set diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index a3d1f34496d..e4e79d35104 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -305,7 +305,6 @@ int main(void) { // dprintf("5v=%u 5vu=%u dlow=%u dhi=%u gca=%u gcd=%u\r\n", v_5v, v_5v_avg, v_5v_avg - V5_LOW, v_5v_avg - V5_HIGH, gcr_actual, gcr_desired); } #endif // CONSOLE_ENABLE - } return 1; diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index 4c088e2b5bf..8adecfa7191 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -874,7 +874,7 @@ void send_mouse(report_mouse_t *report) { } #else /* MOUSE_ENABLE */ -void send_mouse(report_mouse_t *report) { (void)report; } +void send_mouse(report_mouse_t *report) { (void)report; } #endif /* MOUSE_ENABLE */ /* --------------------------------------------------------- From f53e41ac81662a560a299a23c7863dd2f618a1f8 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 15 Feb 2021 08:56:13 +1100 Subject: [PATCH 125/145] Add support for analog USBPD on STM32G4xx. (#11824) * Add support for analog USBPD on STM32G4xx. * Split up to a list of driver types, allow for custom. --- common_features.mk | 24 +++++++++++ drivers/chibios/usbpd_stm32g4.c | 76 +++++++++++++++++++++++++++++++++ drivers/usbpd.h | 29 +++++++++++++ quantum/quantum.h | 4 ++ 4 files changed, 133 insertions(+) create mode 100644 drivers/chibios/usbpd_stm32g4.c create mode 100644 drivers/usbpd.h diff --git a/common_features.mk b/common_features.mk index ecb4f5576bf..8338ce40802 100644 --- a/common_features.mk +++ b/common_features.mk @@ -631,3 +631,27 @@ endif ifeq ($(strip $(JOYSTICK_ENABLE)), digital) OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE endif + +USBPD_ENABLE ?= no +VALID_USBPD_DRIVER_TYPES = custom vendor +USBPD_DRIVER ?= vendor +ifeq ($(strip $(USBPD_ENABLE)), yes) + ifeq ($(filter $(strip $(USBPD_DRIVER)),$(VALID_USBPD_DRIVER_TYPES)),) + $(error USBPD_DRIVER="$(USBPD_DRIVER)" is not a valid USBPD driver) + else + OPT_DEFS += -DUSBPD_ENABLE + ifeq ($(strip $(USBPD_DRIVER)), vendor) + # Vendor-specific implementations + OPT_DEFS += -DUSBPD_VENDOR + ifeq ($(strip $(MCU_SERIES)), STM32G4xx) + OPT_DEFS += -DUSBPD_STM32G4 + SRC += usbpd_stm32g4.c + else + $(error There is no vendor-provided USBPD driver available) + endif + else ifeq ($(strip $(USBPD_DRIVER)), custom) + OPT_DEFS += -DUSBPD_CUSTOM + # Board designers can add their own driver to $(SRC) + endif + endif +endif \ No newline at end of file diff --git a/drivers/chibios/usbpd_stm32g4.c b/drivers/chibios/usbpd_stm32g4.c new file mode 100644 index 00000000000..54c1e1fb3d0 --- /dev/null +++ b/drivers/chibios/usbpd_stm32g4.c @@ -0,0 +1,76 @@ +/* Copyright 2021 Nick Brassel (@tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include + +#ifndef USBPD_UCPD1_CFG1 +# define USBPD_UCPD1_CFG1 (UCPD_CFG1_PSC_UCPDCLK_0 | UCPD_CFG1_TRANSWIN_3 | UCPD_CFG1_IFRGAP_4 | UCPD_CFG1_HBITCLKDIV_4) +#endif // USBPD_UCPD1_CFG1 + +// Initialises the USBPD subsystem +__attribute__((weak)) void usbpd_init(void) { + // Disable dead-battery signals + PWR->CR3 |= PWR_CR3_UCPD_DBDIS; + // Enable the clock for the UCPD1 peripheral + RCC->APB1ENR2 |= RCC_APB1ENR2_UCPD1EN; + + // Copy the existing value + uint32_t CFG1 = UCPD1->CFG1; + // Force-disable UCPD1 before configuring + CFG1 &= ~UCPD_CFG1_UCPDEN; + // Configure UCPD1 + CFG1 = USBPD_UCPD1_CFG1; + // Apply the changes + UCPD1->CFG1 = CFG1; + // Enable UCPD1 + UCPD1->CFG1 |= UCPD_CFG1_UCPDEN; + + // Copy the existing value + uint32_t CR = UCPD1->CR; + // Clear out ANASUBMODE (irrelevant as a sink device) + CR &= ~UCPD_CR_ANASUBMODE_Msk; + // Advertise our capabilities as a sink, with both CC lines enabled + CR |= UCPD_CR_ANAMODE | UCPD_CR_CCENABLE_Msk; + // Apply the changes + UCPD1->CR = CR; +} + +// Gets the current state of the USBPD allowance +__attribute__((weak)) usbpd_allowance_t usbpd_get_allowance(void) { + uint32_t CR = UCPD1->CR; + + int ucpd_enabled = (UCPD1->CFG1 & UCPD_CFG1_UCPDEN_Msk) >> UCPD_CFG1_UCPDEN_Pos; + int anamode = (CR & UCPD_CR_ANAMODE_Msk) >> UCPD_CR_ANAMODE_Pos; + int cc_enabled = (CR & UCPD_CR_CCENABLE_Msk) >> UCPD_CR_CCENABLE_Pos; + + if (ucpd_enabled && anamode && cc_enabled) { + uint32_t SR = UCPD1->SR; + int vstate_cc1 = (SR & UCPD_SR_TYPEC_VSTATE_CC1_Msk) >> UCPD_SR_TYPEC_VSTATE_CC1_Pos; + int vstate_cc2 = (SR & UCPD_SR_TYPEC_VSTATE_CC2_Msk) >> UCPD_SR_TYPEC_VSTATE_CC2_Pos; + int vstate_max = vstate_cc1 > vstate_cc2 ? vstate_cc1 : vstate_cc2; + switch (vstate_max) { + case 0: + case 1: + return USBPD_500MA; // Note that this is 500mA (i.e. max USB 2.0), not 900mA, as we're not using USB 3.1 as a sink device. + case 2: + return USBPD_1500MA; + case 3: + return USBPD_3000MA; + } + } + + return USBPD_500MA; +} \ No newline at end of file diff --git a/drivers/usbpd.h b/drivers/usbpd.h new file mode 100644 index 00000000000..df4f29bb9d5 --- /dev/null +++ b/drivers/usbpd.h @@ -0,0 +1,29 @@ +/* Copyright 2021 Nick Brassel (@tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +typedef enum { + USBPD_500MA, + USBPD_1500MA, + USBPD_3000MA, +} usbpd_allowance_t; + +// Initialises the USBPD subsystem +void usbpd_init(void); + +// Gets the current state of the USBPD allowance +usbpd_allowance_t usbpd_get_allowance(void); \ No newline at end of file diff --git a/quantum/quantum.h b/quantum/quantum.h index 370a65fe044..b7bf5be312b 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -193,6 +193,10 @@ extern layer_state_t layer_state; # include "wpm.h" #endif +#ifdef USBPD_ENABLE +# include "usbpd.h" +#endif + // Function substitutions to ease GPIO manipulation #if defined(__AVR__) typedef uint8_t pin_t; From c80e5f9f8868ccaa8cb990be6f4da3f1011c2b78 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 14 Feb 2021 14:40:38 -0800 Subject: [PATCH 126/145] Audio system overhaul (#11820) * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both -> only the changes on audio_arm_.*, the keyboard related parts are split off to a separate commit bfe468ef1 start morphing wavetable 474d100b5 refined a bit 208bee10f play_notes working 3e6478b0b start in-place documentation of dac settings 3e1826a33 fixed blip (rounding error), other waves, added key selection (left/right) 73853d651 5 voices at 44.1khz dfb401b95 limit voices to working number 9632b3379 configuration for the ez 6241f3f3b notes working in a new way * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commit splits off the plank example keymap from commit f52faeb5d (origin/arm-dac-work) add sample and wavetable examples, parsers for both * refactoring: rename audio_ to reflect their supported hardware-platform and audio-generation method: avr vs arm, and pwm vs dac * refactoring: deducplicate ISR code to update the pwm duty-cycle and period in the avr-pwm-implementation pulls three copies of the same code into one function which should improve readability and maintainability :-) * refactoring: move common code of arm and avr implementation into a separate/new file * refactoring: audio_avr_pwm, renaming defines to decouple them from actually used timers, registers and ISRs * refactoring: audio_avr_pwm - replacing function defines with plain register defines aligns better with other existing qmk code (and the new audio_arm_pwm) doing similar pwm thing * add audio-arm-pwm since not all STM32 have a DAC onboard (STM32F2xx and STM32F3xx), pwm-audio is an alternative (STM32F1xx) this code works on a "BluePill" clone, with an STM32F103C8B * clang-format changes on quantum/audio/* only * audio_arm_dac: stopping the notes caused screeching when using the DAC audio paths * audio_arm_pwm: use pushpull on the pin; so that a piezzo can be hooked up direclty without additional components (opendrain would require an external pullup) * refactoring: remove unused file from/for atmel-avr chips * refactoring: remove unused (avr) wavetable file * audio_arm_dac: adapt dac_end callback to changed chibios DAC api the previous chibios (17.6.0) passed along a pointer into the buffer plus a sample_count (which are/already where included in the DACDrivre object) - the current chibios (19.1.0) only passes the driver object. this patch ports more or less exactly what the previous chibios ISR code did: either have the user-callback work the first or second half of the buffer (dacsample_t pointer, with half the DAC_BUFFER_SIZE samples) by adjusting the pointer and sample count * audio-arm-dac: show a compile-warning on undefined audio-pins Co-Authored-By: Drashna Jaelre * audio_arm_dac: switch from exemplary wavetable generation to sine only sine+triangle+squrare is exemplary, and not realy fit for "production" use 'stairs' are usefull for debugging (hardware, with an oscilloscope) * audio_arm_dac: enable output buffers in the STM32 to drive external loads without any additional ciruitry - external opamps and such * audio: prevent out-of-bounds array access * audio_arm_dac: add output-frequency correcting factor * audio_arm_pwm: get both the alternate-function and pm-callback variants back into working condition and do some code-cleanup, refine documentation, ... * audio_arm_pwm: increase pwm frequency for "higher fidelity" on the previous .frequency=100000 higher frequency musical notes came out wrong (frequency measured on a Tektronix TDS2014B) note | freq | arm-pwm C2 | 65.4 | 65.491 C5 | 523.25 | 523.93 C6 | 1046.5 | 1053.38 C7 | 2093 | 2129 C8 | 4186 | 4350.91 with .frequency = 500000 C8 | 4186 | 4204.6 * audio refactoring: remove unused variables * audio_arm_dac: calibrate note tempo: with a tempo of 60beats-per-second a whole-note should last for exactly one second * audio: allow feature selection in rules.mk so the user can switch the audio driver between DAC and PWM on STM32 boards which support both (STM32F2 and up) or select the "pin alternate" pwm mode, for example on STM32F103 * audio-refactoring: move codeblocks in audio.[ch] into more coherent groups and add some inline documentation * audio-refactoring: cleanup and streamline common code between audio_arm_[dac|pwm] untangeling the relation between audio.c and the two drivers and adding more documenting comments :-) * audio_avr_pwm: getting it back into working condition, and cleanup+refactor * audio-refactoring: documentation and typo fixes Co-Authored-By: Nick Brassel * audio-refactoring: cleanup defines, inludes and remove debug-prints * audio_chibios_dac: define&use a minimal sampling rate, based on the available tone-range to ease up on the cpu-load, while still rendering the higher notes/tones sufficiently also reenable the lower tones, since with the new implementation there is no evidence of them still beeing 'bugged' * audio-refactoring: one common AUDIO_MAX_VOICES define for all audio-drivers * audio-chibios-pwm: pwm-pin-allternate: make the the timer, timer-channel and alternate function user-#definable * audio_chibios_dac: math.h has fmod for this * Redo Arm DAC implementation for additive, wavetable synthesis, sample playback update Jack Humberts dac-example keymaps for the slight changes in the audio-dac interface * audio-refactoring: use a common AUDIO_PIN configuration switch instead of defines have the user select a pin by configuration in rules.mk instead of a define in config.h has the advantage of beeing in a common form/pattern across all audio-driver implementations * audio-refactoring: switch backlight_avr.c to the new AUDIO_PIN defines * audio-common: have advance_note return a boolean if the note changed, to the next one in the melody beeing played * audio-chibios-pwm: fix issue with ~130ms silence between note/frequency changes while playing a SONG through trial,error and a scope/logic analyzer figured out Chibios-PWMDriver (at least in the current version) misbehaves if the initial period is set to zero (or one; two seems to work); when thats the case subsequent calls to 'pwmChhangePeriod' + pwmEnableChannel took ~135ms of silence, before the PWM continued with the new frequency... * audio-refactoring: get 'play_note' working again with a limited number of available voices (say AUDIO_VOICES_MAX=1) allow new frequencies to be played, by discarding the oldest one in the 'frequencies' queue * audio: set the fallback driver to DAC for chibios and PWM for all others (==avr at the moment) * audio-refactoring: moore documentation and some cleanup * audio-avr-pwm: no fallback on unset AUDIO_PIN this seems to be the expected behaviour by some keyboards (looking at ckeys/handwire_101:default) which otherwise fail to build because the firmware-image ends up beeing too large for the atmega... so we fail silently instead to keep travis happy * audio-refactoring: untangling terminology: voice->tone the code actually was working on tones (combination of pitch/frequency, duration, timbre, intensity/volume) and not voices (characteristic sound of an instrument; think piano vs guitar, which can be played together, each having its own "track" = voice on a music sheet) * audio-pwm: allow freq=0 aka a pause/rest in a SONG continue processing, but do not enable pwm units, since freq=0 wouldn't produce any sound anyway (and lead to division by zero on that occasion) * audio-refactoring: audio_advance_note -> audio_advance_state since it does not only affect 'one note', but the internally kept state as a whole * audio-refactoring: untangling terminology: polyphony the feature om the "inherited" avr code has little to do with polyphony (see wikipedia), but is more a time-multiplexing feature, to work around hardware limitations - like only having one pwm channel, that could on its own only reproduce one voice/instrument at a time * audio-chibios-dac: add zero-crossing feature have tones only change/stop when the waveform approaches zero - to avoid audible clicks note that this also requires the samples to start at zero, since the internally kept index into the samples is reset to zero too * audio-refactoring: feature: time-multiplexing of tones on a single output channel this feature was in the original avr-pwm implementation misnomed as "polyphony" with polyphony_rate and so on; did the same thing though: time-multiplexing multiple active notes so that a single output channel could reproduce more than one note at a time (which is not the same as a polyphony - see wikipedia :-) ) * audio-avr-pwm: get music-mode working (again) on AVRs with both pwm channels, or either one of the two :-) play_notes worked already - but music_mode uses play_note * audio-refactoring: split define MAX_SIMULTANEOUS_TONES -> TONE_STACKSIZE since the two cases are independant from one another, the hardware might impose limitations on the number of simultaneously reproducable tones, but the audio state should be able to track an unrelated number of notes recently started by play_note * audio-arm-dac: per define selectable sample-luts plus generation script in ./util * audio-refactoring: heh, avr has a MIN... * audio-refactoring: add basic dac audio-driver based on the current/master implementation whereas current=d96380e65496912e0f68e6531565f4b45efd1623 which is the state of things before this whole audio-refactoring branch boiled down to interface with the refactored audio system = removing all redundant state-managing and frequency calculation * audio-refactoring: rename audio-drivers to driver_$PLATFORM_$DRIVER * audio-arm-pwm: split the software/hardware implementations into separate files which saves us partially from a 'define hell', with the tradeoff that now two somewhat similar chibios_pwm implementations have to be maintained * audio-refactoring: update documentation * audio-arm-dac: apply AUDIO_PIN defines to driver_chibios_dac_basic * audio-arm-dac: dac_additive: stop the hardware when the last sample completed the audio system calls for a driver_stop, which is delayed until the current sample conversion finishes * audio-refactoring: make function-namespace consistent - all (public) audio functions start with audio_ - also refactoring play*_notes/tones to play*_melody, to visually distance it a bit from play*_tone/_note * audio-refactoring: consistent define namespace: DAC_ -> AUDIO_DAC_ * audio-arm-dac: update (inline) documentation regarding MAX for sample values * audio-chibios-dac: remove zero-crossing feature didn't quite work as intended anyway, and stopping the hardware on close-to-zero seems to be enought anyway * audio-arm-dac: dac_basic: respect the configured sample-rate * audio-arm-pwm: have 'note_timbre' influence the pwm-duty cycle like it already does in the avr implementation * audio-refactoring: get VIBRATO working (again) with all drivers (verified with chibios_[dac|pwm]) * audio-arm-dac: zero-crossing feature (Mk II) wait for the generated waveform to approach 'zero' before either turning off the output+timer or switching to the current set of active_tones * audio-refactoring: re-add note-resting -> introduce short_rest inbetween - introduce a short pause/rest between two notes of the same frequency, to separate them audibly - also updating the refactoring comments * audio-refactoring: cleanup refactoring remnants remove the former avr-isr code block - since all its features are now refactored into the different parts of the current system also updates the TODOS * audio-refactoring: reserve negative numbers as unitialized frequencies to allow the valid tone/frequency f=0Hz == rest/pause * audio-refactoring: FIX: first note of melody was missing the first note was missing because 'goto_next_note'=false overrode a state_change=true of the initial play_tone and some code-indentations/cleanup of related parts * audio-arm-dac: fix hardware init-click due to wron .init= value * audio-refactoring: new conveniance function: audio_play_click which can be used to further refactor/remove fauxclicky (avr only) and/or the 'clicky' features * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: consecutive notes of the same frequency get a pause inserted inbetween by audio.c * audio-refactoring: use milliseconds instead of seconds for 'click' parameters clicks are supposed to be short, seconds make little sense * audio-refactoring: use timer ticks instead of counters local counters were used in the original (avr)ISR to advance an index into the lookup tables (for vibrato), and something similar was used for the tone-multiplexing feature decoupling these from the (possibly irregular) calls to advance_state made sesne, since those counters/lookups need to be in relation to a wall-time anyway * audio-refactoring: voices.c: drop 'envelope_index' counter in favour of timer ticks * audio-refactoring: move vibrato and timbre related parts from audio.c to voices.c also drops the now (globally) unused AUDIO_VIBRATO/AUDIO_ENABLE_VIBRATO defines * audio.c: use system-ticks instead of counters the drivers have to take care of for the internal state posision since there already is a system-tick with ms resolution, keeping count separatly with each driver implementation makes little sense; especially since they had to take special care to call audio_advance_state with the correct step/end parameters for the audio state to advance regularly and with the correct pace * audio.c: stop notes after new ones have been started avoids brief states of with no notes playing that would otherwise stop the hardware and might lead to clicks * audio.c: bugfix: actually play a pause instead of just idling/stopping which lead the pwm drivers to stop entirely... * audio-arm-pwm: pwm-software: add inverted output new define AUDIO_PIN_ALT_AS_NEGATIVE will generate an inverted signal on the alternate pin, which boosts the volume if a piezo is connected to both AUDIO_PIN and AUDIO_PIN_ALT * audio-arm-dac: basic: handle piezo configured&wired to both audio pins * audio-refactoring: docs: update for AUDIO_PIN_ALT_AS_NEGATIVE and piezo wiring * audio.c: bugfix: use timer_elapsed32 instad of keeping timestamps avoids running into issues when the uint32 of the timer overflows * audio-refactoring: add 'pragma once' and remove deprecated NOTE_REST * audio_arm_dac: basic: add missing bracket * audio.c: fix delta calculation was in the wrong place, needs to use the 'last_timestamp' before it was reset * audio-refactoring: buildfix: wrong legacy macro for set_timbre * audio.c: 16bit timerstamps suffice * audio-refactoring: separate includes for AVR and chibios * audio-refactoring: timbre: use uint8 instead of float * audio-refactoring: duration: use uint16 for internal per-tone/note state * audio-refactoring: tonemultiplexing: use uint16 instead of float * audio-arm-dac: additive: set second pin output-low used when a piezo is connected to AUDIO_PIN and AUDIO_PIN_ALT, with PIN_ALT_AS_NEGATIVE * audio-refactoring: move AUDIO_PIN selection from rules.mk to config.h to be consistent with how other features are handled in QMK * audio-refactoring: buildfix: wrong legacy macro for set_tempo * audio-arm-dac: additive: set second pin output-low -- FIXUP * audio.c: do duration<>ms conversion in uint instead of float on AVR, to save a couple of bytes in the firmware size * audio-refactoring: cleanup eeprom defines/usage for ARM, avr is handled automagically through the avr libc and common_features.mk Co-Authored-By: Drashna Jaelre * audio.h: throw an error if OFF is larger than MAX * audio-arm-dac: basic: actually stop the dac-conversion on a audio_driver_stop to put the output pin in a known state == AUDIO_DAC_OFF_VALUE, instead of just leaving them where the last conversion was... with AUDIO_PIN_ALT_AS_NEGATIVE this meant one output was left HIGH while the other was left LOW one CAVEAT: due to this change the opposing squarewave when using both A4 and A5 with AUDIO_PIN_ALT_AS_NEGATIVE show extra pulses at the beginning/end on one of the outputs, the two waveforms are in sync otherwise. the extra pusles probably matter little, since this is no high-fidelity sound generation :P * audio-arm-dac: additive: move zero-crossing code out of dac_value_generate which is/should be user-overridable == simple, and doing one thing: providing sample values state-transitions necessary for the zero crossing are better handled in the surrounding loop in the dac_end callback * audio-arm-dac: dac-additive: zero-crossing: ramping up or down after a start trigger ramp up: generate values until zero=OFF_VALUE is reached, then continue normally same in reverse for strop trigger: output values until zero is reached/crossed, then keep OFF_VALUE on the output * audio-arm-dac: dac-additive: BUGFIX: return OFF_VALUE when a pause is playing fixes a bug during SONG playback, which suddenly stopped when it encoutnered a pause * audio-arm-dac: set a sensible default for AUDIO_DAC_VALUE_OFF 1/2 MAX was probably exemplary, can't think of a setup where that would make sense :-P * audio-arm-dac: update synth_sample/_wavetable for new pin-defines * audio-arm-dac: default for AUDIO_DAC_VALUE_OFF turned out that zero or max are bad default choices: when multiple tones are played (>>5) and released at the same time (!), due to the complex waveform never reaching 'zero' the output can take quite a while to reach zero, and hence the zero-crossing code only "releases" the output waaay to late * audio-arm-dac: additive: use DAC for negative pin instead of PAL, which only allows the pin to be configured as output; LOW or HIGH * audio-arm-dac: more compile-time configuration checks * audio-refactoring: typo fixed * audio-refactoring: clang-format on quantum/audio/* * audio-avr-pwm: add defines for B-pin as primary/only speaker also updates documentation. * audio-refactoring: update documentation with proton-c config.h example * audio-refactoring: move glissando (TODO) to voices.c refactored/saved from the original glissando implementation in then upstream-master:audio_avr.c still needs some work though, as it is now the calculation *should* work, but the start-frequency needs to be tracked somewhere/somehow; not only during a SONG playback but also with user input? * audio-refactoring: cleanup: one round of aspell -c * audio-avr-pwm: back to AUDIO_PIN since config_common.h expands them to plain integers, the AUDIO_PIN define can directly be compared to e.g. B5 so there is no need to deal with separate defines like AUDIO_PIN_B5 * audio-refactoring: add technical documentation audio_driver.md which moves some in-code documentation there * audio-arm-dac: move AUDIO_PIN checks into c-code instead of doing everything with the preprocessor, since A4/A5 do not expand to simple integers, preprocessor int-comparison is not possible. but necessary to get a consistent configuration scheme going throughout the audio-code... solution: let c-code handle the different AUDIO_PIN configurations instead (and leave code/size optimizations to the compiler) * audio-arm-dac: compile-fix: set AUDIO_PIN if unset workaround to get the build going again, and be backwarts compatible to arm-keyboards which not yet set the AUDIO_PIN define. until the define is enforced through an '#error" * audio-refactoring: document tone-multiplexing feature * audio-refactoring: Apply suggestions from documentation review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-refactoring: Update docs/audio_driver.md * audio-refactoring: docs: fix markdown newlines Terminating a line in Markdown with -- creates an HTML single-line break (
). Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * audio-arm-dac: additive: fix AUDIO_PIN_ALT handling * audio-arm-pwm: align define naming with other drivers Co-authored-by: Joel Challis * audio-refactoring: set detault tempo to 120 and add documentation for the override * audio-refactoring: update backlight define checks to new AUDIO_PIN names * audio-refactoring: reworking PWM related defines to be more consistent with other QMK code Co-authored-by: Joel Challis * audio-arm: have the state-update-timer user configurable defaulting to GPTD6 or GPTD8 for stm32f2+ (=proton-c) stm32f1 might need to set this to GPTD4, since 6 and 8 are not available * audio-refactoring: PLAY_NOTE_ARRAY was already removed in master * Add prototype for startup * Update chibiOS dac basic to disable pins on stop * Add defaults for Proton C * avoid hanging audio if note is completely missed * Don't redefine pins if they're already defined * Define A4 and A5 for CTPC support * Add license headers to keymap files * Remove figlet? comments * Add DAC config to audio driver docs * Apply suggestions from code review Co-authored-by: Jack Humbert * Add license header to py files * correct license header * Add JohSchneider's name to modified files AKA credit where credit's due * Set executable permission and change interpeter * Add 'wave' to pip requirements * Improve documentation * Add some settings I missed * Strip AUDIO_DRIVER to parse the name correctly * fix depreciated * Update util/audio_generate_dac_lut.py Co-authored-by: Jack Humbert * Fix type in clueboard config * Apply suggestions from tzarc Co-authored-by: Nick Brassel Co-authored-by: Johannes Co-authored-by: JohSchneider Co-authored-by: Nick Brassel Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Joel Challis Co-authored-by: Joshua Diamond Co-authored-by: Jack Humbert --- common_features.mk | 21 +- docs/_summary.md | 1 + docs/audio_driver.md | 221 + docs/config_options.md | 12 +- docs/feature_audio.md | 143 +- .../1upkeyboards/sweet16/v2/proton_c/config.h | 4 + keyboards/atomic/keymaps/pvc/config.h | 2 +- keyboards/boston_meetup/2019/config.h | 5 +- keyboards/c39/keymaps/kuchosauronad0/config.h | 9 - keyboards/ckeys/obelus/config.h | 2 +- keyboards/ckeys/thedora/config.h | 3 + keyboards/clueboard/2x1800/2018/config.h | 4 +- keyboards/clueboard/2x1800/2019/config.h | 4 +- keyboards/clueboard/66/rev4/config.h | 4 + keyboards/clueboard/66_hotswap/gen1/config.h | 4 + .../clueboard/66_hotswap/prototype/config.h | 2 +- keyboards/clueboard/california/config.h | 4 + keyboards/clueboard/card/config.h | 2 +- keyboards/crkbd/keymaps/gotham/config.h | 2 +- keyboards/ergodash/mini/config.h | 2 +- keyboards/ergodash/rev1/config.h | 2 +- .../evyd13/plain60/keymaps/audio/config.h | 2 +- .../flehrad/bigswitch/keymaps/wanleg/config.h | 2 +- keyboards/hadron/ver3/config.h | 6 +- keyboards/handwired/aranck/config.h | 2 +- .../5x6_right_trackball/config.h | 2 +- keyboards/handwired/heisenberg/config.h | 2 +- keyboards/handwired/ibm122m/config.h | 6 +- keyboards/handwired/xealous/config.h | 3 +- keyboards/helix/pico/config.h | 2 +- keyboards/hp69/config.h | 5 +- keyboards/jones/v03/config.h | 4 +- keyboards/jones/v03_1/config.h | 4 +- keyboards/keebio/iris/keymaps/blucky/config.h | 4 +- .../keebio/iris/keymaps/broswen/config.h | 2 +- .../keebio/iris/keymaps/drashna/config.h | 2 +- keyboards/keebio/iris/keymaps/mtdjr/config.h | 2 +- keyboards/keebio/iris/keymaps/pvinis/config.h | 2 +- .../levinson/keymaps/issmirnov/config.h | 2 +- .../quefrency/keymaps/drashna_ms/config.h | 2 +- .../keebio/viterbi/keymaps/drashna/config.h | 2 +- keyboards/keysofkings/twokey/config.h | 30 +- .../knops/mini/keymaps/mverteuil/config.h | 4 +- keyboards/launchpad/keymaps/drashna/config.h | 2 +- keyboards/lets_split/sockets/config.h | 2 +- keyboards/lfkeyboards/lfk78/config.h | 2 +- keyboards/lfkeyboards/lfk87/config.h | 2 +- keyboards/lfkeyboards/mini1800/config.h | 2 +- keyboards/lfkeyboards/smk65/revb/config.h | 3 +- keyboards/meira/featherble/config.h | 2 +- keyboards/meira/keymaps/grahampheath/config.h | 2 +- keyboards/mitosis/keymaps/datagrok/config.h | 2 +- keyboards/mitosis/keymaps/mjt/config.h | 2 +- keyboards/moonlander/config.h | 4 + keyboards/mschwingen/modelm/config.h | 2 +- keyboards/nack/config.h | 14 +- keyboards/nightly_boards/n40_o/config.h | 4 +- keyboards/nightly_boards/n87/config.h | 2 +- keyboards/nightly_boards/octopad/config.h | 2 +- keyboards/orthodox/keymaps/drashna/config.h | 2 +- keyboards/planck/config.h | 2 +- keyboards/planck/ez/config.h | 5 +- keyboards/planck/keymaps/dodger/config.h | 2 +- .../planck/keymaps/synth_sample/config.h | 56 + .../planck/keymaps/synth_sample/keymap.c | 296 ++ .../planck/keymaps/synth_sample/rules.mk | 2 + .../planck/keymaps/synth_sample/sample.h | 3797 +++++++++++++++++ .../planck/keymaps/synth_wavetable/config.h | 56 + .../planck/keymaps/synth_wavetable/keymap.c | 320 ++ .../planck/keymaps/synth_wavetable/rules.mk | 2 + .../keymaps/synth_wavetable/wavetable.h | 2197 ++++++++++ keyboards/planck/light/config.h | 4 +- keyboards/planck/rev6/config.h | 6 +- keyboards/preonic/config.h | 2 +- keyboards/preonic/rev3/config.h | 6 +- keyboards/scarletbandana/config.h | 2 +- keyboards/silverbullet44/config.h | 2 +- keyboards/splitkb/zima/config.h | 2 +- keyboards/subatomic/config.h | 2 +- keyboards/tetris/config.h | 2 +- keyboards/vitamins_included/rev1/config.h | 2 +- keyboards/vitamins_included/rev2/config.h | 2 +- keyboards/wilba_tech/wt60_xt/config.h | 2 +- keyboards/yoichiro/lunakey_mini/config.h | 2 +- .../community/numpad_5x6/bjohnson/config.h | 2 - layouts/community/numpad_5x6/drashna/config.h | 1 - .../community/ortho_4x12/bakingpy/config.h | 2 +- layouts/community/ortho_5x12/drashna/config.h | 2 +- .../ortho_5x14/yet-another-developer/config.h | 2 +- .../community/split_3x6_3/drashna/config.h | 2 +- quantum/audio/audio.c | 539 +++ quantum/audio/audio.h | 295 +- quantum/audio/audio_avr.c | 812 ---- quantum/audio/audio_chibios.c | 721 ---- quantum/audio/audio_pwm.c | 606 --- quantum/audio/driver_avr_pwm.h | 17 + quantum/audio/driver_avr_pwm_hardware.c | 322 ++ quantum/audio/driver_chibios_dac.h | 126 + quantum/audio/driver_chibios_dac_additive.c | 335 ++ quantum/audio/driver_chibios_dac_basic.c | 245 ++ quantum/audio/driver_chibios_pwm.h | 40 + quantum/audio/driver_chibios_pwm_hardware.c | 144 + quantum/audio/driver_chibios_pwm_software.c | 164 + quantum/audio/musical_notes.h | 77 +- quantum/audio/voices.c | 170 +- quantum/audio/voices.h | 21 +- quantum/audio/wave.h | 36 - quantum/backlight/backlight_avr.c | 4 +- requirements-dev.txt | 1 + users/yanfali/config.h | 2 +- util/audio_generate_dac_lut.py | 67 + util/sample_parser.py | 39 + util/wavetable_parser.py | 40 + 113 files changed, 9738 insertions(+), 2463 deletions(-) create mode 100644 docs/audio_driver.md create mode 100644 keyboards/planck/keymaps/synth_sample/config.h create mode 100644 keyboards/planck/keymaps/synth_sample/keymap.c create mode 100644 keyboards/planck/keymaps/synth_sample/rules.mk create mode 100644 keyboards/planck/keymaps/synth_sample/sample.h create mode 100644 keyboards/planck/keymaps/synth_wavetable/config.h create mode 100644 keyboards/planck/keymaps/synth_wavetable/keymap.c create mode 100644 keyboards/planck/keymaps/synth_wavetable/rules.mk create mode 100644 keyboards/planck/keymaps/synth_wavetable/wavetable.h create mode 100644 quantum/audio/audio.c delete mode 100644 quantum/audio/audio_avr.c delete mode 100644 quantum/audio/audio_chibios.c delete mode 100644 quantum/audio/audio_pwm.c create mode 100644 quantum/audio/driver_avr_pwm.h create mode 100644 quantum/audio/driver_avr_pwm_hardware.c create mode 100644 quantum/audio/driver_chibios_dac.h create mode 100644 quantum/audio/driver_chibios_dac_additive.c create mode 100644 quantum/audio/driver_chibios_dac_basic.c create mode 100644 quantum/audio/driver_chibios_pwm.h create mode 100644 quantum/audio/driver_chibios_pwm_hardware.c create mode 100644 quantum/audio/driver_chibios_pwm_software.c delete mode 100644 quantum/audio/wave.h create mode 100755 util/audio_generate_dac_lut.py create mode 100755 util/sample_parser.py create mode 100755 util/wavetable_parser.py diff --git a/common_features.mk b/common_features.mk index 8338ce40802..6463efb8ba4 100644 --- a/common_features.mk +++ b/common_features.mk @@ -42,12 +42,31 @@ ifeq ($(strip $(COMMAND_ENABLE)), yes) OPT_DEFS += -DCOMMAND_ENABLE endif +AUDIO_ENABLE ?= no ifeq ($(strip $(AUDIO_ENABLE)), yes) + ifeq ($(PLATFORM),CHIBIOS) + AUDIO_DRIVER ?= dac_basic + ifeq ($(strip $(AUDIO_DRIVER)), dac_basic) + OPT_DEFS += -DAUDIO_DRIVER_DAC + else ifeq ($(strip $(AUDIO_DRIVER)), dac_additive) + OPT_DEFS += -DAUDIO_DRIVER_DAC + ## stm32f2 and above have a usable DAC unit, f1 do not, and need to use pwm instead + else ifeq ($(strip $(AUDIO_DRIVER)), pwm_software) + OPT_DEFS += -DAUDIO_DRIVER_PWM + else ifeq ($(strip $(AUDIO_DRIVER)), pwm_hardware) + OPT_DEFS += -DAUDIO_DRIVER_PWM + endif + else + # fallback for all other platforms is pwm + AUDIO_DRIVER ?= pwm_hardware + OPT_DEFS += -DAUDIO_DRIVER_PWM + endif OPT_DEFS += -DAUDIO_ENABLE MUSIC_ENABLE = yes SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c - SRC += $(QUANTUM_DIR)/audio/audio_$(PLATFORM_KEY).c + SRC += $(QUANTUM_DIR)/audio/audio.c ## common audio code, hardware agnostic + SRC += $(QUANTUM_DIR)/audio/driver_$(PLATFORM_KEY)_$(strip $(AUDIO_DRIVER)).c SRC += $(QUANTUM_DIR)/audio/voices.c SRC += $(QUANTUM_DIR)/audio/luts.c endif diff --git a/docs/_summary.md b/docs/_summary.md index 526caf926f1..acbfcfaeda5 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -133,6 +133,7 @@ * [Compatible Microcontrollers](compatible_microcontrollers.md) * [Drivers](hardware_drivers.md) * [ADC Driver](adc_driver.md) + * [Audio Driver](audio_driver.md) * [I2C Driver](i2c_driver.md) * [SPI Driver](spi_driver.md) * [WS2812 Driver](ws2812_driver.md) diff --git a/docs/audio_driver.md b/docs/audio_driver.md new file mode 100644 index 00000000000..7cd5a98d9f4 --- /dev/null +++ b/docs/audio_driver.md @@ -0,0 +1,221 @@ +# Audio Driver :id=audio-driver + +The [Audio feature](feature_audio.md) breaks the hardware specifics out into separate, exchangeable driver units, with a common interface to the audio-"core" - which itself handles playing songs and notes while tracking their progress in an internal state, initializing/starting/stopping the driver as needed. + +Not all MCUs support every available driver, either the platform-support is not there (yet?) or the MCU simply does not have the required hardware peripheral. + + +## AVR :id=avr + +Boards built around an Atmega32U4 can use two sets of PWM capable pins, each driving a separate speaker. +The possible configurations are: + +| | Timer3 | Timer1 | +|--------------|-------------|--------------| +| one speaker | C4,C5 or C6 | | +| one speaker | | B4, B5 or B7 | +| two speakers | C4,C5 or C6 | B4, B5 or B7 | + +Currently there is only one/default driver for AVR based boards, which is automatically configured to: + +```make +AUDIO_DRIVER = pwm_hardware +``` + + +## ARM :id=arm + +For Arm based boards, QMK depends on ChibiOS - hence any MCU supported by the later is likely usable, as long as certain hardware peripherals are available. + +Supported wiring configurations, with their ChibiOS/MCU peripheral requirement are listed below; +piezo speakers are marked with :one: for the first/primary and :two: for the secondary. + + | driver | GPTD6
Tim6 | GPTD7
Tim7 | GPTD8
Tim8 | PWMD11
Tim1_Ch1 | + |--------------|------------------------------------------|------------------------|---------------|-------------------------------| + | dac_basic | A4+DACD1 = :one: | A5+DACD2 = :one: | state | | + | | A4+DACD1 = :one: + Gnd | A5+DACD2 = :two: + Gnd | state | | + | | A4+DACD1 = :two: + Gnd | A5+DACD2 = :one: + Gnd | state | | + | | A4+DACD1 = :one: + Gnd | | state | | + | | | A5+DACD2 = :one: + Gnd | state | | + | dac_additive | A4+DACD1 = :one: + Gnd | | | | + | | A5+DACD2 = :one: + Gnd | | | | + | | A4+DACD1 + A5+DACD2 = :one: 2 | | | | + | pwm_software | state-update | | | any = :one: | + | pwm hardware | state-update | | | A8 = :one: 3 | + + +1: the routing and alternate functions for PWM differ sometimes between STM32 MCUs, if in doubt consult the data-sheet +2: one piezo connected to A4 and A5, with AUDIO_PIN_ALT_AS_NEGATIVE set +3: TIM1_CH1 = A8 on STM32F103C8, other combinations are possible, see Data-sheet. configured with: AUDIO_PWM_DRIVER and AUDIO_PWM_CHANNEL + + + +### DAC basic :id=dac-basic + +The default driver for ARM boards, in absence of an overriding configuration. +This driver needs one Timer per enabled/used DAC channel, to trigger conversion; and a third timer to trigger state updates with the audio-core. + +Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timers 6, 7 and 8: + +``` c +//halconf.h: +#define HAL_USE_DAC TRUE +#define HAL_USE_GPT TRUE +#include_next +``` + +``` c +// mcuconf.h: +#include_next +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE +``` + +?> Note: DAC1 (A4) uses TIM6, DAC2 (A5) uses TIM7, and the audio state timer uses TIM8 (configurable). + +You can also change the timer used for the overall audio state by defining the driver. For instance: + +```c +#define AUDIO_STATE_TIMER GPTD9 +``` + +### DAC additive :id=dac-additive + +only needs one timer (GPTD6, Tim6) to trigger the DAC unit to do a conversion; the audio state updates are in turn triggered during the DAC callback. + +Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timer 6: + +``` c +//halconf.h: +#define HAL_USE_DAC TRUE +#define HAL_USE_GPT TRUE +#include_next +``` + +``` c +// mcuconf.h: +#include_next +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +``` + +### DAC Config + +| Define | Defaults | Description --------------------------------------------------------------------------------------------- | +| `AUDIO_DAC_SAMPLE_MAX` | `4095U` | Highest value allowed. Lower value means lower volume. And 4095U is the upper limit, since this is limited to a 12 bit value. Only effects non-pregenerated samples. | +| `AUDIO_DAC_OFF_VALUE` | `AUDIO_DAC_SAMPLE_MAX / 2` | The value of the DAC when notplaying anything. Some setups may require a high (`AUDIO_DAC_SAMPLE_MAX`) or low (`0`) value here. | +| `AUDIO_MAX_SIMULTANEOUS_TONES` | __see next table__ | The number of tones that can be played simultaneously. A value that is too high may freeze the controller or glitch out when too many tones are being played. | +| `AUDIO_DAC_SAMPLE_RATE` | __see next table__ | Effective bit rate of the DAC (in hertz), higher limits simultaneous tones, and lower sacrifices quality. | + +There are a number of predefined quality settings that you can use, with "sane minimum" being the default. You can use custom values by simply defining the sample rate and number of simultaneous tones, instead of using one of the listed presets. + +| Define | Sample Rate | Simultaneous tones | +| `AUDIO_DAC_QUALITY_VERY_LOW` | `11025U` | `8` | +| `AUDIO_DAC_QUALITY_LOW` | `22040U` | `4` | +| `AUDIO_DAC_QUALITY_HIGH` | `44100U` | `2` | +| `AUDIO_DAC_QUALITY_VERY_HIGH` | `88200U` | `1` | +| `AUDIO_DAC_QUALITY_SANE_MINIMUM` | `16384U` | `8` | + + +```c + /* zero crossing (or approach, whereas zero == DAC_OFF_VALUE, which can be configured to anything from 0 to DAC_SAMPLE_MAX) + * ============================*=*========================== AUDIO_DAC_SAMPLE_MAX + * * * + * * * + * --------------------------------------------------------- + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- AUDIO_DAC_OFF_VALUE + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- + * * + * * * + * * * + * =====*=*================================================= 0x0 + */ +``` + + +### PWM hardware :id=pwm-hardware + +This driver uses the ChibiOS-PWM system to produce a square-wave on specific output pins that are connected to the PWM hardware. +The hardware directly toggles the pin via its alternate function. See your MCU's data-sheet for which pin can be driven by what timer - looking for TIMx_CHy and the corresponding alternate function. + +A configuration example for the STM32F103C8 would be: +``` c +//halconf.h: +#define HAL_USE_PWM TRUE +#define HAL_USE_PAL TRUE +#define HAL_USE_GPT TRUE +#include_next +``` + +``` c +// mcuconf.h: +#include_next +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE +``` + +If we now target pin A8, looking through the data-sheet of the STM32F103C8, for the timers and alternate functions +- TIM1_CH1 = PA8 <- alternate0 +- TIM1_CH2 = PA9 +- TIM1_CH3 = PA10 +- TIM1_CH4 = PA11 + +with all this information, the configuration would contain these lines: +``` c +//config.h: +#define AUDIO_PIN A8 +#define AUDIO_PWM_DRIVER PWMD1 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 +``` + +ChibiOS uses GPIOv1 for the F103, which only knows of one alternate function. +On 'larger' STM32s, GPIOv2 or GPIOv3 are used; with them it is also necessary to configure `AUDIO_PWM_PAL_MODE` to the correct alternate function for the selected pin, timer and timer-channel. + + +### PWM software :id=pwm-software + +This driver uses the PWM callbacks from PWMD1 with TIM1_CH1 to toggle the selected AUDIO_PIN in software. +During the same callback, with AUDIO_PIN_ALT_AS_NEGATIVE set, the AUDIO_PIN_ALT is toggled inversely to AUDIO_PIN. This is useful for setups that drive a piezo from two pins (instead of one and Gnd). + +You can also change the timer used for software PWM by defining the driver. For instance: + +```c +#define AUDIO_STATE_TIMER GPTD8 +``` + + +### Testing Notes :id=testing-notes + +While not an exhaustive list, the following table provides the scenarios that have been partially validated: + +| | DAC basic | DAC additive | PWM hardware | PWM software | +|--------------------------|--------------------|--------------------|--------------------|--------------------| +| Atmega32U4 | :o: | :o: | :heavy_check_mark: | :o: | +| STM32F103C8 (bluepill) | :x: | :x: | :heavy_check_mark: | :heavy_check_mark: | +| STM32F303CCT6 (proton-c) | :heavy_check_mark: | :heavy_check_mark: | ? | :heavy_check_mark: | +| STM32F405VG | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | +| L0xx | :x: (no Tim8) | ? | ? | ? | + + +:heavy_check_mark: : works and was tested +:o: : does not apply +:x: : not supported by MCU + +*Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.* diff --git a/docs/config_options.md b/docs/config_options.md index 9a64b9b3d20..aeaaf47aaf4 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -67,16 +67,22 @@ This is a C header file that is one of the first things included, and will persi * turns on the alternate audio voices (to cycle through) * `#define C4_AUDIO` * enables audio on pin C4 + * Deprecated. Use `#define AUDIO_PIN C4` * `#define C5_AUDIO` * enables audio on pin C5 + * Deprecated. Use `#define AUDIO_PIN C5` * `#define C6_AUDIO` * enables audio on pin C6 + * Deprecated. Use `#define AUDIO_PIN C6` * `#define B5_AUDIO` - * enables audio on pin B5 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) + * enables audio on pin B5 (duophony is enabled if one of B pins is enabled along with one of C pins) + * Deprecated. Use `#define AUDIO_PIN B5`, or use `#define AUDIO_PIN_ALT B5` if a `C` pin is enabled with `AUDIO_PIN` * `#define B6_AUDIO` - * enables audio on pin B6 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) + * enables audio on pin B5 (duophony is enabled if one of B pins is enabled along with one of C pins) + * Deprecated. Use `#define AUDIO_PIN B6`, or use `#define AUDIO_PIN_ALT B6` if a `C` pin is enabled with `AUDIO_PIN` * `#define B7_AUDIO` - * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) + * enables audio on pin B5 (duophony is enabled if one of B pins is enabled along with one of C pins) + * Deprecated. Use `#define AUDIO_PIN B7`, or use `#define AUDIO_PIN_ALT B7` if a `C` pin is enabled with `AUDIO_PIN` * `#define BACKLIGHT_PIN B7` * pin of the backlight * `#define BACKLIGHT_LEVELS 3` diff --git a/docs/feature_audio.md b/docs/feature_audio.md index 68ba4477a52..9e7ba75f521 100644 --- a/docs/feature_audio.md +++ b/docs/feature_audio.md @@ -1,21 +1,117 @@ # Audio -Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to certain PWM-capable pins, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes. +Your keyboard can make sounds! If you've got a spare pin you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes. -Up to two simultaneous audio voices are supported, one driven by timer 1 and another driven by timer 3. The following pins can be defined as audio outputs in config.h: +To activate this feature, add `AUDIO_ENABLE = yes` to your `rules.mk`. -Timer 1: -`#define B5_AUDIO` -`#define B6_AUDIO` -`#define B7_AUDIO` +## AVR based boards +On Atmega32U4 based boards, up to two simultaneous tones can be rendered. +With one speaker connected to a PWM capable pin on PORTC driven by timer 3 and the other on one of the PWM pins on PORTB driven by timer 1. -Timer 3: -`#define C4_AUDIO` -`#define C5_AUDIO` -`#define C6_AUDIO` +The following pins can be configured as audio outputs in `config.h` - for one speaker set eiter one out of: -If you add `AUDIO_ENABLE = yes` to your `rules.mk`, there's a couple different sounds that will automatically be enabled without any other configuration: +* `#define AUDIO_PIN C4` +* `#define AUDIO_PIN C5` +* `#define AUDIO_PIN C6` +* `#define AUDIO_PIN B5` +* `#define AUDIO_PIN B6` +* `#define AUDIO_PIN B7` +and *optionally*, for a second speaker, one of: +* `#define AUDIO_PIN_ALT B5` +* `#define AUDIO_PIN_ALT B6` +* `#define AUDIO_PIN_ALT B7` + +### Wiring +per speaker is - for example with a piezo buzzer - the black lead to Ground, and the red lead connected to the selected AUDIO_PIN for the primary; and similarly with AUDIO_PIN_ALT for the secondary. + + +## ARM based boards +for more technical details, see the notes on [Audio driver](audio_driver.md). + + +### DAC (basic) +Most STM32 MCUs have DAC peripherals, with a notable exception of the STM32F1xx series. Generally, the DAC peripheral drives pins A4 or A5. To enable DAC-based audio output on STM32 devices, add `AUDIO_DRIVER = dac_basic` to `rules.mk` and set in `config.h` either: + +`#define AUDIO_PIN A4` or `#define AUDIO_PIN A5` + +the other DAC channel can optionally be used with a secondary speaker, just set: + +`#define AUDIO_PIN_ALT A4` or `#define AUDIO_PIN_ALT A5` + +Do note though that the dac_basic driver is only capable of reproducing one tone per speaker/channel at a time, for more tones simultaneously, try the dac_additive driver. + +#### Wiring: +for two piezos, for example configured as `AUDIO_PIN A4` and `AUDIO_PIN_ALT A5` would be: red lead to A4 and black to Ground, and similarly with the second one: A5 = red, and Ground = black + +another alternative is to drive *one* piezo with both DAC pins - for an extra "push". +wiring red to A4 and black to A5 (or the other way round) and add `#define AUDIO_PIN_ALT_AS_NEGATIVE` to `config.h` + +##### Proton-C Example: +The Proton-C comes (optionally) with one 'builtin' piezo, which is wired to A4+A5. +For this board `config.h` would include these defines: + +```c +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE +``` + +### DAC (additive) +Another option, besides dac_basic (which produces sound through a square-wave), is to use the DAC to do additive wave synthesis. +With a number of predefined wave-forms or by providing your own implementation to generate samples on the fly. +To use this feature set `AUDIO_DRIVER = dac_additive` in your `rules.mk`, and select in `config.h` EITHER `#define AUDIO_PIN A4` or `#define AUDIO_PIN A5`. + +The used waveform *defaults* to sine, but others can be selected by adding one of the following defines to `config.h`: + +* `#define AUDIO_DAC_SAMPLE_WAVEFORM_SINE` +* `#define AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE` +* `#define AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID` +* `#define AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE` + +Should you rather choose to generate and use your own sample-table with the DAC unit, implement `uint16_t dac_value_generate(void)` with your keyboard - for an example implementation see keyboards/planck/keymaps/synth_sample or keyboards/planck/keymaps/synth_wavetable + + +### PWM (software) +if the DAC pins are unavailable (or the MCU has no usable DAC at all, like STM32F1xx); PWM can be an alternative. +Note that there is currently only one speaker/pin supported. + +set in `rules.mk`: + +`AUDIO_DRIVER = pwm_software` and in `config.h`: +`#define AUDIO_PIN C13` (can be any pin) to have the selected pin output a pwm signal, generated from a timer callback which toggles the pin in software. + +#### Wiring +the usual piezo wiring: red goes to the selected AUDIO_PIN, black goes to ground. + +OR if you can chose to drive one piezo with two pins, for example `#define AUDIO_PIN B1`, `#define AUDIO_PIN_ALT B2` in `config.h`, with `#define AUDIO_PIN_ALT_AS_NEGATIVE` - then the red lead could go to B1, the black to B2. + +### PWM (hardware) +STM32F1xx have to fall back to using PWM, but can do so in hardware; but again on currently only one speaker/pin. + +`AUDIO_DRIVER = pwm_hardware` in `rules.mk`, and in `config.h`: +`#define AUDIO_PIN A8` +`#define AUDIO_PWM_DRIVER PWMD1` +`#define AUDIO_PWM_CHANNEL 1` +(as well as `#define AUDIO_PWM_PAL_MODE 42` if you are on STM32F2 or larger) +which will use Timer 1 to directly drive pin PA8 through the PWM hardware (TIM1_CH1 = PA8). +Should you want to use the pwm-hardware on another pin and timer - be ready to dig into the STM32 data-sheet to pick the right TIMx_CHy and pin-alternate function. + + +## Tone Multiplexing +Since most drivers can only render one tone per speaker at a time (with the one exception: arm dac-additive) there also exists a "workaround-feature" that does time-slicing/multiplexing - which does what the name implies: cycle through a set of active tones (e.g. when playing chords in Music Mode) at a given rate, and put one tone at a time out through the one/few speakers that are available. + +To enable this feature, and configure a starting-rate, add the following defines to `config.h`: +```c +#define AUDIO_ENABLE_TONE_MULTIPLEXING +#define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10 +``` + +The audio core offers interface functions to get/set/change the tone multiplexing rate from within `keymap.c`. + + +## Songs +There's a couple of different sounds that will automatically be enabled without any other configuration: ``` STARTUP_SONG // plays when the keyboard starts up (audio.c) GOODBYE_SONG // plays when you press the RESET key (quantum.c) @@ -67,15 +163,34 @@ The available keycodes for audio are: * `AU_OFF` - Turn Audio Feature off * `AU_TOG` - Toggle Audio Feature state -!> These keycodes turn all of the audio functionality on and off. Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely. +!> These keycodes turn all of the audio functionality on and off. Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely. + +## Tempo +the 'speed' at which SONGs are played is dictated by the set Tempo, which is measured in beats-per-minute. Note lenghts are defined relative to that. +The initial/default tempo is set to 120 bpm, but can be configured by setting `TEMPO_DEFAULT` in `config.c`. +There is also a set of functions to modify the tempo from within the user/keymap code: +```c +void audio_set_tempo(uint8_t tempo); +void audio_increase_tempo(uint8_t tempo_change); +void audio_decrease_tempo(uint8_t tempo_change); +``` ## ARM Audio Volume -For ARM devices, you can adjust the DAC sample values. If your board is too loud for you or your coworkers, you can set the max using `DAC_SAMPLE_MAX` in your `config.h`: +For ARM devices, you can adjust the DAC sample values. If your board is too loud for you or your coworkers, you can set the max using `AUDIO_DAC_SAMPLE_MAX` in your `config.h`: ```c -#define DAC_SAMPLE_MAX 65535U +#define AUDIO_DAC_SAMPLE_MAX 4095U ``` +the DAC usually runs in 12Bit mode, hence a volume of 100% = 4095U + +Note: this only adjusts the volume aka 'works' if you stick to WAVEFORM_SQUARE, since its samples are generated on the fly - any other waveform uses a hardcoded/precomputed sample-buffer. + +## Voices +Aka "audio effects", different ones can be enabled by setting in `config.h` these defines: +`#define AUDIO_VOICES` to enable the feature, and `#define AUDIO_VOICE_DEFAULT something` to select a specific effect +for details see quantum/audio/voices.h and .c + ## Music Mode diff --git a/keyboards/1upkeyboards/sweet16/v2/proton_c/config.h b/keyboards/1upkeyboards/sweet16/v2/proton_c/config.h index 30abf28ee33..286af1857f6 100644 --- a/keyboards/1upkeyboards/sweet16/v2/proton_c/config.h +++ b/keyboards/1upkeyboards/sweet16/v2/proton_c/config.h @@ -18,3 +18,7 @@ #define ENCODERS_PAD_A { A2 } #define ENCODERS_PAD_B { A1 } #define ENCODER_RESOLUTION 4 + +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/atomic/keymaps/pvc/config.h b/keyboards/atomic/keymaps/pvc/config.h index 3803a2ccd01..01fa0f43134 100644 --- a/keyboards/atomic/keymaps/pvc/config.h +++ b/keyboards/atomic/keymaps/pvc/config.h @@ -31,7 +31,7 @@ along with this program. If not, see . #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define C6_AUDIO +#define AUDIO_PIN C6 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/boston_meetup/2019/config.h b/keyboards/boston_meetup/2019/config.h index 3f2a0dd5d60..d9fd93da6e2 100644 --- a/keyboards/boston_meetup/2019/config.h +++ b/keyboards/boston_meetup/2019/config.h @@ -31,7 +31,10 @@ //Audio #undef AUDIO_VOICES -#undef C6_AUDIO +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(ONE_UP_SOUND) diff --git a/keyboards/c39/keymaps/kuchosauronad0/config.h b/keyboards/c39/keymaps/kuchosauronad0/config.h index cf0726e2bb0..d67935a9fd0 100644 --- a/keyboards/c39/keymaps/kuchosauronad0/config.h +++ b/keyboards/c39/keymaps/kuchosauronad0/config.h @@ -32,12 +32,3 @@ along with this program. If not, see . # define RGB_DI_PIN D0 # define RGBLED_NUM 4 #endif // !RGBLIGHT_ENABLE - -/* -#ifdef AUDIO_ENABLE -# Timer 1: #define B5_AUDIO #define B6_AUDIO #define B7_AUDIO -# Timer 3: #define C4_AUDIO #define C5_AUDIO #define C6_AUDIO -//TODO: only D0 and D1 available -#endif // !AUDIO_ENABLE -*/ - diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h index eaf4811ba73..25bc1db03c1 100644 --- a/keyboards/ckeys/obelus/config.h +++ b/keyboards/ckeys/obelus/config.h @@ -154,7 +154,7 @@ along with this program. If not, see . #ifdef AUDIO_ENABLE #define AUDIO_VOICES - #define C6_AUDIO + #define AUDIO_PIN C6 #define STARTUP_SONG SONG(STARTUP_SOUND) #endif diff --git a/keyboards/ckeys/thedora/config.h b/keyboards/ckeys/thedora/config.h index 349e33748b5..c7557aa62d6 100755 --- a/keyboards/ckeys/thedora/config.h +++ b/keyboards/ckeys/thedora/config.h @@ -157,6 +157,9 @@ // NOTE: Must change polyphony_rate to a number higher than 0 in voices.c #define AUDIO_VOICES #define PITCH_STANDARD_A 880.0f +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE // Mouse keys #define MOUSEKEY_DELAY 0 diff --git a/keyboards/clueboard/2x1800/2018/config.h b/keyboards/clueboard/2x1800/2018/config.h index 40486379eab..9d5b9b51447 100644 --- a/keyboards/clueboard/2x1800/2018/config.h +++ b/keyboards/clueboard/2x1800/2018/config.h @@ -20,8 +20,8 @@ along with this program. If not, see . #include "config_common.h" /* audio support */ -#define B7_AUDIO -#define C4_AUDIO +#define AUDIO_PIN_ALT B7 +#define AUDIO_PIN C4 #define AUDIO_CLICKY /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/clueboard/2x1800/2019/config.h b/keyboards/clueboard/2x1800/2019/config.h index 595dc61081f..162d41a2e2a 100644 --- a/keyboards/clueboard/2x1800/2019/config.h +++ b/keyboards/clueboard/2x1800/2019/config.h @@ -27,8 +27,8 @@ along with this program. If not, see . #define ENCODER_RESOLUTION 4 /* audio support */ -#define B7_AUDIO -#define C4_AUDIO +#define AUDIO_PIN_ALT B7 +#define AUDIO_PIN C4 #define AUDIO_CLICKY /* diff --git a/keyboards/clueboard/66/rev4/config.h b/keyboards/clueboard/66/rev4/config.h index c745b5a1101..2c11cf1ec05 100644 --- a/keyboards/clueboard/66/rev4/config.h +++ b/keyboards/clueboard/66/rev4/config.h @@ -22,3 +22,7 @@ #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 // The led to start at #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 5 // How many LEDs to travel #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up + +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h index 1ddcfacf4d6..1471af63dcd 100644 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ b/keyboards/clueboard/66_hotswap/gen1/config.h @@ -108,3 +108,7 @@ #define LED_DRIVER_COUNT 1 #define LED_DRIVER_LED_COUNT 71 + +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/clueboard/66_hotswap/prototype/config.h b/keyboards/clueboard/66_hotswap/prototype/config.h index 5c22b927adc..a1ab703c340 100644 --- a/keyboards/clueboard/66_hotswap/prototype/config.h +++ b/keyboards/clueboard/66_hotswap/prototype/config.h @@ -3,7 +3,7 @@ /* Speaker configuration */ -#define B7_AUDIO +#define AUDIO_PIN B7 #define NO_MUSIC_MODE #define AUDIO_CLICKY diff --git a/keyboards/clueboard/california/config.h b/keyboards/clueboard/california/config.h index b8c5759db6b..017f1ddf66d 100644 --- a/keyboards/clueboard/california/config.h +++ b/keyboards/clueboard/california/config.h @@ -1,3 +1,7 @@ #pragma once #include "config_common.h" + +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/clueboard/card/config.h b/keyboards/clueboard/card/config.h index 67ddb5e25ca..a115f5d6cf2 100644 --- a/keyboards/clueboard/card/config.h +++ b/keyboards/clueboard/card/config.h @@ -23,4 +23,4 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 6 // Enable audio -#define C6_AUDIO +#define AUDIO_PIN C6 diff --git a/keyboards/crkbd/keymaps/gotham/config.h b/keyboards/crkbd/keymaps/gotham/config.h index ed08203aa15..dd58a0fe05d 100644 --- a/keyboards/crkbd/keymaps/gotham/config.h +++ b/keyboards/crkbd/keymaps/gotham/config.h @@ -15,7 +15,7 @@ #define NO_ACTION_ONESHOT #ifdef AUDIO_ENABLE -# define B5_AUDIO +# define AUDIO_PIN B5 # define NO_MUSIC_MODE # define AUDIO_CLICKY #endif diff --git a/keyboards/ergodash/mini/config.h b/keyboards/ergodash/mini/config.h index 5e16c78544a..b936e0f54e2 100644 --- a/keyboards/ergodash/mini/config.h +++ b/keyboards/ergodash/mini/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST -#define C6_AUDIO +#define AUDIO_PIN C6 /* number of backlight levels */ #ifdef BACKLIGHT_ENABLE diff --git a/keyboards/ergodash/rev1/config.h b/keyboards/ergodash/rev1/config.h index 6e25194e4b6..07282cdad28 100644 --- a/keyboards/ergodash/rev1/config.h +++ b/keyboards/ergodash/rev1/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST -#define C6_AUDIO +#define AUDIO_PIN C6 /* number of backlight levels */ #ifdef BACKLIGHT_ENABLE diff --git a/keyboards/evyd13/plain60/keymaps/audio/config.h b/keyboards/evyd13/plain60/keymaps/audio/config.h index 9a43b7fbe34..50309173b40 100644 --- a/keyboards/evyd13/plain60/keymaps/audio/config.h +++ b/keyboards/evyd13/plain60/keymaps/audio/config.h @@ -1,3 +1,3 @@ #pragma once -#define B7_AUDIO +#define AUDIO_PIN B7 diff --git a/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h b/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h index 54abb9a6c17..bb638ce599b 100644 --- a/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h +++ b/keyboards/flehrad/bigswitch/keymaps/wanleg/config.h @@ -39,4 +39,4 @@ #define QMK_LED B0 // set audio pin -#define C6_AUDIO +#define AUDIO_PIN C6 diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h index f76ca40603c..8c04575eeab 100644 --- a/keyboards/hadron/ver3/config.h +++ b/keyboards/hadron/ver3/config.h @@ -50,7 +50,11 @@ //Audio #undef AUDIO_VOICES -#undef C6_AUDIO +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(PLANCK_SOUND) diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index 5356feb1ef8..7d0ab25fe42 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -101,7 +101,7 @@ along with this program. If not, see . /** * Aranck-specific definitions */ -#define B5_AUDIO +#define AUDIO_PIN B5 /** * Aranck-specific definitions END */ diff --git a/keyboards/handwired/dactyl_manuform/5x6_right_trackball/config.h b/keyboards/handwired/dactyl_manuform/5x6_right_trackball/config.h index 6d89314a2ce..d18f08e4085 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_right_trackball/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_right_trackball/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . #define BOOTMAGIC_LITE_ROW_RIGHT 6 #define BOOTMAGIC_LITE_COLUMN_RIGHT 5 -#define C6_AUDIO +#define AUDIO_PIN C6 #define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095 #define DYNAMIC_KEYMAP_LAYER_COUNT 16 diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index 9fe2ec879ab..ba35f24aca2 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -101,7 +101,7 @@ along with this program. If not, see . /** * Heisenberg-specific definitions */ -#define B5_AUDIO +#define AUDIO_PIN B5 /** * Heisenberg-specific definitions END */ diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index e0e95d6d3b7..bd1fdc97dc2 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 #define MANUFACTURER IBM -#define PRODUCT IBM Model M 122 key +#define PRODUCT IBM Model M 122 key /* key matrix size */ #define MATRIX_ROWS 8 @@ -102,8 +102,8 @@ along with this program. If not, see . * */ -#define B6_AUDIO -#define C6_AUDIO +#define AUDIO_PIN_ALT B6 +#define AUDIO_PIN C6 /* control how magic key switches layers */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true diff --git a/keyboards/handwired/xealous/config.h b/keyboards/handwired/xealous/config.h index 251e85d4c12..5c1469b1f01 100644 --- a/keyboards/handwired/xealous/config.h +++ b/keyboards/handwired/xealous/config.h @@ -34,10 +34,9 @@ along with this program. If not, see . #ifdef AUDIO_ENABLE - #define C6_AUDIO + #define AUDIO_PIN C6 #define STARTUP_SONG SONG(STARTUP_SOUND) #define NO_MUSIC_MODE #define TONE_QWERTY SONG(Q__NOTE(_E4)); #define TONE_NUMPAD SONG(Q__NOTE(_D4)); #endif - diff --git a/keyboards/helix/pico/config.h b/keyboards/helix/pico/config.h index 3938db30e6a..b01fd3a0016 100644 --- a/keyboards/helix/pico/config.h +++ b/keyboards/helix/pico/config.h @@ -77,7 +77,7 @@ along with this program. If not, see . /* Audio */ #ifdef AUDIO_ENABLE - #define B5_AUDIO + #define AUDIO_PIN B5 #endif /* ws2812 RGB LED */ diff --git a/keyboards/hp69/config.h b/keyboards/hp69/config.h index ca0a9eb47b6..06dd57145ca 100644 --- a/keyboards/hp69/config.h +++ b/keyboards/hp69/config.h @@ -48,5 +48,6 @@ along with this program. If not, see . #define RGBLED_NUM 20 #define RGBLIGHT_ANIMATIONS -#define A4_AUDIO -#define A5_AUDIO \ No newline at end of file +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/jones/v03/config.h b/keyboards/jones/v03/config.h index 3683a43dd19..0ff82e8d37d 100644 --- a/keyboards/jones/v03/config.h +++ b/keyboards/jones/v03/config.h @@ -57,8 +57,8 @@ along with this program. If not, see . /* Audio */ #ifdef AUDIO_ENABLE - #define C6_AUDIO - #define B6_AUDIO // 2nd pin for simultaneous audio. + #define AUDIO_PIN C6 + #define AUDIO_PIN_ALT B6 // 2nd pin for simultaneous audio. #define AUDIO_CLICKY #endif diff --git a/keyboards/jones/v03_1/config.h b/keyboards/jones/v03_1/config.h index a064e563969..c1d6a577fc4 100644 --- a/keyboards/jones/v03_1/config.h +++ b/keyboards/jones/v03_1/config.h @@ -57,8 +57,8 @@ along with this program. If not, see . /* Audio */ #ifdef AUDIO_ENABLE - #define C6_AUDIO - #define B7_AUDIO // 2nd pin for simultaneous audio. + #define AUDIO_PIN C6 + #define AUDIO_PIN_ALT B7 // 2nd pin for simultaneous audio. #define AUDIO_CLICKY #endif diff --git a/keyboards/keebio/iris/keymaps/blucky/config.h b/keyboards/keebio/iris/keymaps/blucky/config.h index 213445dd3f3..f187addbd33 100644 --- a/keyboards/keebio/iris/keymaps/blucky/config.h +++ b/keyboards/keebio/iris/keymaps/blucky/config.h @@ -1,5 +1,5 @@ /* -Copyright 2019 Brian Luckenbill +Copyright 2019 Brian Luckenbill This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -17,7 +17,7 @@ along with this program. If not, see . #pragma once -#define C6_AUDIO +#define AUDIO_PIN C6 #undef RGBLED_NUM #define RGBLED_NUM 12 diff --git a/keyboards/keebio/iris/keymaps/broswen/config.h b/keyboards/keebio/iris/keymaps/broswen/config.h index 19c47780dbf..fcfbfe8cf06 100644 --- a/keyboards/keebio/iris/keymaps/broswen/config.h +++ b/keyboards/keebio/iris/keymaps/broswen/config.h @@ -32,7 +32,7 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 5 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#define C6_AUDIO +#define AUDIO_PIN C6 #define NO_MUSIC_MODE diff --git a/keyboards/keebio/iris/keymaps/drashna/config.h b/keyboards/keebio/iris/keymaps/drashna/config.h index 63f87b7c4e0..f68166c98f0 100644 --- a/keyboards/keebio/iris/keymaps/drashna/config.h +++ b/keyboards/keebio/iris/keymaps/drashna/config.h @@ -43,7 +43,7 @@ #endif // RGBLIGHT_ENABLE #ifdef AUDIO_ENABLE -# define C6_AUDIO +# define AUDIO_PIN C6 # ifdef RGBLIGHT_ENABLE # ifndef __arm__ # define NO_MUSIC_MODE diff --git a/keyboards/keebio/iris/keymaps/mtdjr/config.h b/keyboards/keebio/iris/keymaps/mtdjr/config.h index 93dc4c211dd..9adb6d62715 100644 --- a/keyboards/keebio/iris/keymaps/mtdjr/config.h +++ b/keyboards/keebio/iris/keymaps/mtdjr/config.h @@ -34,7 +34,7 @@ along with this program. If not, see . // #define AUDIO_CLICKY // #define AUDIO_CLICKY_ON -// #define C6_AUDIO +// #define AUDIO_PIN C6 // #define AUDIO_CLICKY_FREQ_RANDOMNESS 0.1f // #define AUDIO_CLICKY_FREQ_MAX 100.0f diff --git a/keyboards/keebio/iris/keymaps/pvinis/config.h b/keyboards/keebio/iris/keymaps/pvinis/config.h index 9574f2a837f..c2870eba0b9 100644 --- a/keyboards/keebio/iris/keymaps/pvinis/config.h +++ b/keyboards/keebio/iris/keymaps/pvinis/config.h @@ -16,7 +16,7 @@ // Choose pin to use for audio. C6 is the one iris uses. #ifdef AUDIO_ENABLE -# define C6_AUDIO +# define AUDIO_PIN C6 # define STARTUP_SONG SONG(NO_SOUND) // No startup song. #endif diff --git a/keyboards/keebio/levinson/keymaps/issmirnov/config.h b/keyboards/keebio/levinson/keymaps/issmirnov/config.h index 89c2f5ebe82..2f0fbaf33c6 100644 --- a/keyboards/keebio/levinson/keymaps/issmirnov/config.h +++ b/keyboards/keebio/levinson/keymaps/issmirnov/config.h @@ -29,6 +29,6 @@ #ifdef AUDIO_ENABLE #define QMK_SPEAKER C6 - #define C6_AUDIO + #define AUDIO_PIN C6 #define NO_MUSIC_MODE // Save 2000 bytes #endif diff --git a/keyboards/keebio/quefrency/keymaps/drashna_ms/config.h b/keyboards/keebio/quefrency/keymaps/drashna_ms/config.h index 089c8cf79e5..80a3cb877e2 100644 --- a/keyboards/keebio/quefrency/keymaps/drashna_ms/config.h +++ b/keyboards/keebio/quefrency/keymaps/drashna_ms/config.h @@ -35,6 +35,6 @@ along with this program. If not, see . #endif #ifdef AUDIO_ENABLE - #define B7_AUDIO + #define AUDIO_PIN B7 #define AUDIO_CLICKY #endif diff --git a/keyboards/keebio/viterbi/keymaps/drashna/config.h b/keyboards/keebio/viterbi/keymaps/drashna/config.h index 5d7ffa8a1d5..2decb3b3e93 100644 --- a/keyboards/keebio/viterbi/keymaps/drashna/config.h +++ b/keyboards/keebio/viterbi/keymaps/drashna/config.h @@ -34,7 +34,7 @@ #define PRODUCT Drashnas Viterbi Macro Pad #ifdef AUDIO_ENABLE -# define C6_AUDIO +# define AUDIO_PIN C6 # define NO_MUSIC_MODE #endif diff --git a/keyboards/keysofkings/twokey/config.h b/keyboards/keysofkings/twokey/config.h index d7f4c3cf0a6..9b77fa73e24 100755 --- a/keyboards/keysofkings/twokey/config.h +++ b/keyboards/keysofkings/twokey/config.h @@ -1,18 +1,18 @@ /* Copyright 2020 Keys of Kings - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once @@ -59,7 +59,7 @@ #define RGBLIGHT_HUE_STEP 4 #define RGBLIGHT_SAT_STEP 4 #define RGBLIGHT_VAL_STEP 4 -#define B6_AUDIO +#define AUDIO_PIN B6 #define AUDIO_CLICKY #endif diff --git a/keyboards/knops/mini/keymaps/mverteuil/config.h b/keyboards/knops/mini/keymaps/mverteuil/config.h index f72145c5a86..584296cfaad 100644 --- a/keyboards/knops/mini/keymaps/mverteuil/config.h +++ b/keyboards/knops/mini/keymaps/mverteuil/config.h @@ -18,8 +18,8 @@ #if defined(AUDIO_ENABLE) #define AUDIO_CLICKY - #define B5_AUDIO - #define C6_AUDIO + #define AUDIO_PIN_ALT B5 + #define AUDIO_PIN C6 #define STARTUP_SONG SONG(ZELDA_PUZZLE) #define GOODBYE_SONG SONG(COIN_SOUND) #endif diff --git a/keyboards/launchpad/keymaps/drashna/config.h b/keyboards/launchpad/keymaps/drashna/config.h index 212b1da805e..b14becc25bf 100644 --- a/keyboards/launchpad/keymaps/drashna/config.h +++ b/keyboards/launchpad/keymaps/drashna/config.h @@ -27,5 +27,5 @@ #define RGBLIGHT_VAL_STEP 17 #define DRIVER_LED_TOTAL RGBLED_NUM -#define B7_AUDIO +#define AUDIO_PIN B7 #define AUDIO_CLICKY diff --git a/keyboards/lets_split/sockets/config.h b/keyboards/lets_split/sockets/config.h index 4315ce24fda..67fa4b4ccc2 100644 --- a/keyboards/lets_split/sockets/config.h +++ b/keyboards/lets_split/sockets/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . /* Audio settings */ #ifdef AUDIO_ENABLE - #define C6_AUDIO // Define this to enable the buzzer + #define AUDIO_PIN C6 // Define this to enable the buzzer #endif /* diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 5a855b07c53..2b0b01d8611 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -39,7 +39,7 @@ along with this program. If not, see . #define TAPPING_TERM 200 -#define C6_AUDIO +#define AUDIO_PIN C6 #define AUDIO_VOICES #define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index 118c135aa1e..c030590921e 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #endif #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_LEVELS 10 #define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index a6cd675ddfb..b8c0f2b671d 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -37,7 +37,7 @@ along with this program. If not, see . #define RGBLED_NUM 26 // Number of LEDs #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_LEVELS 10 #define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255} diff --git a/keyboards/lfkeyboards/smk65/revb/config.h b/keyboards/lfkeyboards/smk65/revb/config.h index 0d4fe40f358..924a04fd9ef 100644 --- a/keyboards/lfkeyboards/smk65/revb/config.h +++ b/keyboards/lfkeyboards/smk65/revb/config.h @@ -43,8 +43,7 @@ along with this program. If not, see . //RevB only: #define AUDIO_VOICES -#define C6_AUDIO -// #define B5_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_LEVELS 8 #define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255} diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h index c6c63556d65..e8db87acbb3 100644 --- a/keyboards/meira/featherble/config.h +++ b/keyboards/meira/featherble/config.h @@ -37,7 +37,7 @@ along with this program. If not, see . #define UNUSED_PINS #define QMK_SPEAKER B5 -#define B5_AUDIO +#define AUDIO_PIN B5 #define AUDIO_VOICES // #define BACKLIGHT_PIN B7 diff --git a/keyboards/meira/keymaps/grahampheath/config.h b/keyboards/meira/keymaps/grahampheath/config.h index fcc5e4f1368..604f3784615 100644 --- a/keyboards/meira/keymaps/grahampheath/config.h +++ b/keyboards/meira/keymaps/grahampheath/config.h @@ -21,7 +21,7 @@ // place overrides here #define MUSIC_MASK (keycode != KC_NO) -#define C6_AUDIO +#define AUDIO_PIN C6 #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(PLANCK_SOUND) // #define STARTUP_SONG SONG(NO_SOUND) diff --git a/keyboards/mitosis/keymaps/datagrok/config.h b/keyboards/mitosis/keymaps/datagrok/config.h index 0e82b628b4d..5f37d27e694 100644 --- a/keyboards/mitosis/keymaps/datagrok/config.h +++ b/keyboards/mitosis/keymaps/datagrok/config.h @@ -36,7 +36,7 @@ } #define AUDIO_VOICES #define AUDIO_CLICKY -#define C6_AUDIO +#define AUDIO_PIN C6 #endif #endif diff --git a/keyboards/mitosis/keymaps/mjt/config.h b/keyboards/mitosis/keymaps/mjt/config.h index 71adc5a2df7..830cbc9e09d 100644 --- a/keyboards/mitosis/keymaps/mjt/config.h +++ b/keyboards/mitosis/keymaps/mjt/config.h @@ -15,7 +15,7 @@ #endif #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 // fix iPhone power adapter issue #define USB_MAX_POWER_CONSUMPTION 50 diff --git a/keyboards/moonlander/config.h b/keyboards/moonlander/config.h index d1c685280f9..c88feea3d00 100644 --- a/keyboards/moonlander/config.h +++ b/keyboards/moonlander/config.h @@ -101,3 +101,7 @@ # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383 # define DYNAMIC_KEYMAP_LAYER_COUNT 32 #endif + +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/mschwingen/modelm/config.h b/keyboards/mschwingen/modelm/config.h index 07881cd211f..2b42bb38ed7 100644 --- a/keyboards/mschwingen/modelm/config.h +++ b/keyboards/mschwingen/modelm/config.h @@ -87,5 +87,5 @@ #define RGBLED_NUM 3 // disabled, needs PCB patch. -//#define C6_AUDIO +//#define AUDIO_PIN C6 //#define NO_MUSIC_MODE diff --git a/keyboards/nack/config.h b/keyboards/nack/config.h index 9f0880e38fe..e442a13336f 100644 --- a/keyboards/nack/config.h +++ b/keyboards/nack/config.h @@ -13,7 +13,7 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . -*/ +*/ #pragma once #include "config_common.h" @@ -27,7 +27,7 @@ along with this program. If not, see . #define MATRIX_ROWS 4 #define MATRIX_COLS 13 -#define MATRIX_ROW_PINS { A0, A1, A2, A3 } +#define MATRIX_ROW_PINS { A0, A1, A2, A3 } #define MATRIX_COL_PINS { A6, A7, A8, A9, A10, B0, B1, B2, B6, B7, C13, C14, C15 } #define DIODE_DIRECTION ROW2COL @@ -40,7 +40,7 @@ along with this program. If not, see . #define RGB_DI_PIN B5 #define RGBLED_NUM 52 #define DRIVER_LED_TOTAL RGBLED_NUM - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 // Max brightness of LEDs #define RGB_MATRIX_STARTUP_VAL 64 #define RGB_MATRIX_HUE_STEP 10 #define RGB_MATRIX_SAT_STEP 10 @@ -49,11 +49,11 @@ along with this program. If not, see . #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(NO_SOUND) - #define AUDIO_PIN A4 // Pin of the left speaker - #define AUDIO_PIN_ALT A5 // Pin of the right speaker - /* + #define AUDIO_PIN A5 + #define AUDIO_PIN_ALT A4 + #define AUDIO_PIN_ALT_AS_NEGATIVE + /* * Basically, change this section once pull request 6165 has been merged * https://github.com/qmk/qmk_firmware/pull/6165 */ #endif - diff --git a/keyboards/nightly_boards/n40_o/config.h b/keyboards/nightly_boards/n40_o/config.h index e0bcdbe0114..a5257cc4946 100644 --- a/keyboards/nightly_boards/n40_o/config.h +++ b/keyboards/nightly_boards/n40_o/config.h @@ -66,7 +66,7 @@ along with this program. If not, see . /* Audio */ -#define B7_AUDIO +#define AUDIO_PIN B7 #define AUDIO_CLICKY @@ -80,5 +80,3 @@ along with this program. If not, see . #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - - diff --git a/keyboards/nightly_boards/n87/config.h b/keyboards/nightly_boards/n87/config.h index 890276c3050..0315119d888 100644 --- a/keyboards/nightly_boards/n87/config.h +++ b/keyboards/nightly_boards/n87/config.h @@ -84,7 +84,7 @@ along with this program. If not, see . // #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 #endif -#define B7_AUDIO +#define AUDIO_PIN B7 #define AUDIO_CLICKY diff --git a/keyboards/nightly_boards/octopad/config.h b/keyboards/nightly_boards/octopad/config.h index 1477ce93e25..ee417644d7e 100644 --- a/keyboards/nightly_boards/octopad/config.h +++ b/keyboards/nightly_boards/octopad/config.h @@ -66,7 +66,7 @@ along with this program. If not, see . /* Audio */ -#define B5_AUDIO +#define AUDIO_PIN B5 #define AUDIO_CLICKY #define NO_MUSIC_MODE diff --git a/keyboards/orthodox/keymaps/drashna/config.h b/keyboards/orthodox/keymaps/drashna/config.h index 585c916404f..e3a89bce6aa 100644 --- a/keyboards/orthodox/keymaps/drashna/config.h +++ b/keyboards/orthodox/keymaps/drashna/config.h @@ -50,7 +50,7 @@ along with this program. If not, see . #endif // RGBLIGHT_ENABLE #ifdef AUDIO_ENABLE -# define C6_AUDIO +# define AUDIO_PIN C6 # ifdef RGBLIGHT_ENABLE # define NO_MUSIC_MODE # endif diff --git a/keyboards/planck/config.h b/keyboards/planck/config.h index c8cbd7494a3..f7dce70207f 100644 --- a/keyboards/planck/config.h +++ b/keyboards/planck/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define QMK_SPEAKER C6 #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_PIN B7 diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h index ecab5d5dcdf..7f887649638 100644 --- a/keyboards/planck/ez/config.h +++ b/keyboards/planck/ez/config.h @@ -56,7 +56,10 @@ #define MUSIC_MAP #undef AUDIO_VOICES -#undef C6_AUDIO +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ // #define DEBOUNCE 6 diff --git a/keyboards/planck/keymaps/dodger/config.h b/keyboards/planck/keymaps/dodger/config.h index 2f94edb0157..38af37bc051 100644 --- a/keyboards/planck/keymaps/dodger/config.h +++ b/keyboards/planck/keymaps/dodger/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define QMK_SPEAKER C6 #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_PIN B7 diff --git a/keyboards/planck/keymaps/synth_sample/config.h b/keyboards/planck/keymaps/synth_sample/config.h new file mode 100644 index 00000000000..930b26b0001 --- /dev/null +++ b/keyboards/planck/keymaps/synth_sample/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2020 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#ifdef AUDIO_ENABLE + #define AUDIO_PIN A5 + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 diff --git a/keyboards/planck/keymaps/synth_sample/keymap.c b/keyboards/planck/keymaps/synth_sample/keymap.c new file mode 100644 index 00000000000..87a7479cef8 --- /dev/null +++ b/keyboards/planck/keymaps/synth_sample/keymap.c @@ -0,0 +1,296 @@ +/* Copyright 2019 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + BACKLIT, + EXT_PLV +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_planck_grid( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PLOVER] = LAYOUT_planck_grid( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef KEYBOARD_planck_rev5 + PORTE &= ~(1<<6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef KEYBOARD_planck_rev5 + PORTE |= (1<<6); + #endif + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void encoder_update(bool clockwise) { + if (clockwise) { + #ifdef MOUSEKEY_ENABLE + register_code(KC_MS_WH_DOWN); + unregister_code(KC_MS_WH_DOWN); + #else + register_code(KC_PGDN); + unregister_code(KC_PGDN); + #endif + } else { + #ifdef MOUSEKEY_ENABLE + register_code(KC_MS_WH_UP); + unregister_code(KC_MS_WH_UP); + #else + register_code(KC_PGUP); + unregister_code(KC_PGUP); + #endif + } +} + +void matrix_scan_user(void) { + +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} + +#include "sample.h" + +uint32_t dac_sample_custom_counter = 0; + +uint16_t dac_value_generate(void) { + if (is_playing_note()) { + uint16_t sample = dac_sample_custom[dac_sample_custom_counter]; + dac_sample_custom_counter = (dac_sample_custom_counter + 1) % AUDIO_DAC_SAMPLE_CUSTOM_LENGTH; + return sample; + } else { + return AUDIO_DAC_OFF_VALUE; + } +} diff --git a/keyboards/planck/keymaps/synth_sample/rules.mk b/keyboards/planck/keymaps/synth_sample/rules.mk new file mode 100644 index 00000000000..ebfcda22143 --- /dev/null +++ b/keyboards/planck/keymaps/synth_sample/rules.mk @@ -0,0 +1,2 @@ +AUDIO_ENABLE = yes +AUDIO_DRIVER = dac_additive diff --git a/keyboards/planck/keymaps/synth_sample/sample.h b/keyboards/planck/keymaps/synth_sample/sample.h new file mode 100644 index 00000000000..71c1b87e762 --- /dev/null +++ b/keyboards/planck/keymaps/synth_sample/sample.h @@ -0,0 +1,3797 @@ +/* +Copyright 2020 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#define AUDIO_DAC_SAMPLE_CUSTOM_LENGTH 30208 + +static const dacsample_t dac_sample_custom[30208] = { + 2041, 2039, 2039, 2037, 2035, 2037, 2037, 2037, + 2038, 2037, 2037, 2040, 2039, 2038, 2036, 2035, + 2036, 2036, 2036, 2034, 2034, 2034, 2032, 2032, + 2033, 2034, 2032, 2030, 2029, 2031, 2030, 2029, + 2029, 2030, 2029, 2030, 2030, 2031, 2028, 2028, + 2028, 2027, 2025, 2026, 2027, 2026, 2025, 2026, + 2026, 2025, 2023, 2022, 2023, 2021, 2021, 2023, + 2020, 2023, 2023, 2022, 2022, 2021, 2021, 2020, + 2022, 2020, 2017, 2016, 2015, 2018, 2017, 2015, + 2013, 2012, 2015, 2013, 2011, 2012, 2011, 2011, + 2010, 2008, 2008, 2010, 2010, 2006, 2006, 2006, + 2004, 2005, 2006, 2006, 2005, 2002, 2005, 2003, + 2003, 2004, 2002, 2001, 2003, 2003, 2002, 2003, + 2003, 2000, 2000, 2000, 1998, 1997, 1998, 1999, + 1997, 1995, 1995, 1996, 1996, 1992, 1995, 1995, + 1994, 1994, 1995, 1997, 1996, 1996, 1997, 1997, + 1997, 1996, 1996, 1995, 1997, 1997, 1996, 1998, + 1995, 1996, 1996, 1996, 1996, 1994, 1990, 1991, + 1992, 1991, 1994, 1992, 1993, 1995, 1994, 1995, + 1992, 1991, 1991, 1992, 1993, 1992, 1992, 1993, + 1993, 1992, 1990, 1989, 1991, 1992, 1991, 1991, + 1990, 1990, 1992, 1992, 1991, 1992, 1992, 1994, + 1992, 1992, 1992, 1993, 1993, 1994, 1995, 1993, + 1991, 1992, 1990, 1989, 1990, 1988, 1988, 1987, + 1989, 1989, 1985, 1986, 1987, 1985, 1986, 1986, + 1987, 1988, 1988, 1989, 1989, 1988, 1988, 1990, + 1991, 1991, 1990, 1991, 1992, 1994, 1994, 1995, + 1994, 1995, 1997, 1995, 1995, 1995, 1997, 1997, + 1997, 1996, 1999, 2000, 1997, 1998, 1999, 2002, + 2001, 2001, 2001, 2002, 2000, 1998, 2000, 2004, + 2002, 2001, 2003, 2005, 2004, 2004, 2002, 2004, + 2004, 2001, 2000, 2001, 2003, 2005, 2005, 2005, + 2005, 2006, 2010, 2010, 2009, 2007, 2006, 2008, + 2006, 2007, 2007, 2005, 2005, 2005, 2007, 2005, + 2006, 2007, 2009, 2010, 2008, 2007, 2006, 2006, + 2005, 2005, 2005, 2004, 2005, 2004, 2004, 2003, + 2007, 2006, 2006, 2004, 2005, 2006, 2007, 2007, + 2006, 2010, 2007, 2008, 2009, 2012, 2012, 2010, + 2011, 2010, 2014, 2012, 2013, 2013, 2014, 2014, + 2013, 2012, 2012, 2012, 2010, 2013, 2012, 2010, + 2011, 2011, 2012, 2012, 2013, 2013, 2015, 2016, + 2015, 2015, 2015, 2015, 2015, 2014, 2012, 2014, + 2016, 2017, 2016, 2015, 2018, 2019, 2017, 2017, + 2017, 2017, 2016, 2016, 2017, 2017, 2018, 2021, + 2020, 2019, 2019, 2022, 2022, 2024, 2024, 2023, + 2023, 2023, 2024, 2025, 2026, 2025, 2024, 2025, + 2025, 2026, 2026, 2023, 2023, 2023, 2023, 2023, + 2023, 2024, 2024, 2025, 2024, 2022, 2022, 2021, + 2021, 2022, 2022, 2024, 2023, 2023, 2023, 2021, + 2023, 2023, 2024, 2024, 2025, 2024, 2026, 2027, + 2025, 2026, 2028, 2026, 2027, 2027, 2025, 2024, + 2027, 2028, 2027, 2028, 2027, 2027, 2028, 2028, + 2030, 2029, 2032, 2031, 2030, 2029, 2028, 2030, + 2027, 2028, 2028, 2028, 2026, 2027, 2028, 2027, + 2029, 2032, 2030, 2030, 2032, 2033, 2030, 2030, + 2032, 2030, 2030, 2030, 2032, 2032, 2033, 2031, + 2034, 2032, 2029, 2028, 2028, 2030, 2028, 2029, + 2030, 2028, 2029, 2029, 2029, 2030, 2032, 2033, + 2031, 2036, 2034, 2032, 2032, 2031, 2032, 2031, + 2032, 2033, 2035, 2033, 2032, 2034, 2035, 2036, + 2037, 2038, 2039, 2038, 2038, 2038, 2040, 2040, + 2041, 2041, 2041, 2043, 2041, 2041, 2043, 2043, + 2041, 2040, 2042, 2042, 2042, 2044, 2044, 2041, + 2042, 2043, 2042, 2044, 2043, 2044, 2044, 2045, + 2045, 2044, 2045, 2044, 2045, 2043, 2042, 2043, + 2043, 2043, 2043, 2044, 2044, 2044, 2045, 2044, + 2044, 2043, 2042, 2045, 2046, 2045, 2046, 2048, + 2048, 2046, 2046, 2046, 2049, 2048, 2050, 2049, + 2049, 2050, 2053, 2051, 2049, 2050, 2047, 2050, + 2048, 2052, 2050, 2051, 2053, 2051, 2051, 2048, + 2051, 2050, 2049, 2051, 2052, 2051, 2050, 2051, + 2050, 2050, 2051, 2050, 2048, 2049, 2049, 2048, + 2050, 2050, 2050, 2049, 2048, 2048, 2048, 2048, + 2049, 2049, 2049, 2050, 2051, 2050, 2053, 2051, + 2051, 2053, 2052, 2052, 2052, 2051, 2053, 2055, + 2056, 2056, 2055, 2056, 2056, 2056, 2059, 2058, + 2055, 2057, 2059, 2057, 2056, 2056, 2056, 2057, + 2059, 2060, 2060, 2059, 2059, 2059, 2059, 2061, + 2059, 2059, 2060, 2061, 2059, 2057, 2058, 2060, + 2060, 2061, 2060, 2061, 2062, 2063, 2062, 2060, + 2062, 2060, 2061, 2061, 2060, 2060, 2061, 2062, + 2062, 2062, 2061, 2059, 2062, 2063, 2062, 2063, + 2063, 2063, 2063, 2063, 2063, 2063, 2065, 2063, + 2063, 2065, 2065, 2066, 2065, 2067, 2067, 2066, + 2065, 2065, 2065, 2066, 2066, 2063, 2064, 2062, + 2063, 2062, 2062, 2061, 2062, 2063, 2062, 2061, + 2061, 2062, 2058, 2059, 2061, 2062, 2062, 2062, + 2062, 2064, 2063, 2063, 2062, 2061, 2061, 2063, + 2060, 2059, 2059, 2058, 2059, 2059, 2059, 2062, + 2063, 2063, 2062, 2061, 2061, 2061, 2061, 2062, + 2060, 2058, 2059, 2060, 2060, 2059, 2059, 2057, + 2059, 2059, 2056, 2057, 2056, 2057, 2056, 2056, + 2056, 2057, 2057, 2057, 2055, 2055, 2055, 2053, + 2054, 2054, 2054, 2054, 2052, 2051, 2054, 2055, + 2055, 2053, 2055, 2054, 2055, 2055, 2053, 2053, + 2054, 2052, 2051, 2053, 2051, 2052, 2052, 2054, + 2054, 2053, 2051, 2051, 2053, 2052, 2051, 2050, + 2049, 2049, 2048, 2049, 2049, 2047, 2046, 2047, + 2047, 2047, 2046, 2048, 2046, 2046, 2046, 2044, + 2043, 2044, 2045, 2046, 2043, 2044, 2043, 2046, + 2044, 2044, 2043, 2043, 2042, 2039, 2037, 2039, + 2038, 2039, 2039, 2038, 2038, 2038, 2039, 2036, + 2034, 2034, 2033, 2035, 2034, 2032, 2031, 2034, + 2035, 2033, 2034, 2032, 2032, 2033, 2031, 2031, + 2031, 2032, 2032, 2032, 2030, 2030, 2029, 2029, + 2029, 2025, 2024, 2024, 2024, 2025, 2025, 2028, + 2028, 2025, 2024, 2026, 2025, 2022, 2023, 2021, + 2018, 2019, 2020, 2020, 2020, 2021, 2021, 2018, + 2017, 2019, 2017, 2016, 2018, 2019, 2018, 2016, + 2017, 2016, 2014, 2017, 2017, 2017, 2016, 2014, + 2012, 2011, 2011, 2011, 2011, 2012, 2011, 2009, + 2011, 2011, 2011, 2012, 2009, 2009, 2010, 2011, + 2011, 2011, 2008, 2008, 2010, 2009, 2009, 2008, + 2007, 2010, 2009, 2011, 2012, 2011, 2012, 2012, + 2010, 2010, 2011, 2009, 2010, 2010, 2010, 2012, + 2011, 2011, 2011, 2010, 2010, 2009, 2012, 2008, + 2009, 2010, 2010, 2008, 2008, 2009, 2007, 2007, + 2007, 2007, 2009, 2008, 2006, 2006, 2010, 2011, + 2011, 2009, 2010, 2007, 2008, 2007, 2009, 2011, + 2009, 2009, 2008, 2009, 2009, 2009, 2007, 2010, + 2008, 2009, 2013, 2011, 2011, 2009, 2010, 2009, + 2007, 2007, 2008, 2008, 2009, 2010, 2008, 2009, + 2009, 2010, 2010, 2010, 2009, 2007, 2008, 2007, + 2011, 2012, 2010, 2009, 2009, 2010, 2008, 2010, + 2011, 2010, 2010, 2012, 2011, 2010, 2013, 2014, + 2013, 2014, 2016, 2015, 2016, 2017, 2016, 2020, + 2022, 2022, 2020, 2022, 2023, 2024, 2023, 2022, + 2021, 2020, 2023, 2022, 2023, 2022, 2023, 2024, + 2022, 2021, 2021, 2021, 2021, 2021, 2021, 2023, + 2024, 2024, 2022, 2022, 2023, 2026, 2027, 2024, + 2025, 2029, 2027, 2029, 2030, 2029, 2029, 2028, + 2029, 2029, 2028, 2031, 2031, 2029, 2027, 2026, + 2026, 2028, 2025, 2025, 2021, 2022, 2025, 2025, + 2028, 2026, 2025, 2025, 2023, 2024, 2024, 2027, + 2027, 2029, 2028, 2025, 2027, 2029, 2031, 2028, + 2026, 2028, 2028, 2028, 2028, 2030, 2026, 2028, + 2029, 2029, 2030, 2030, 2030, 2032, 2032, 2032, + 2031, 2030, 2031, 2031, 2033, 2035, 2033, 2032, + 2031, 2032, 2032, 2032, 2032, 2031, 2030, 2030, + 2028, 2030, 2029, 2027, 2029, 2028, 2027, 2029, + 2032, 2031, 2031, 2032, 2030, 2029, 2032, 2033, + 2032, 2027, 2026, 2029, 2030, 2031, 2033, 2033, + 2033, 2035, 2035, 2034, 2035, 2034, 2035, 2036, + 2037, 2035, 2035, 2034, 2034, 2034, 2037, 2036, + 2035, 2033, 2033, 2034, 2033, 2035, 2035, 2036, + 2038, 2037, 2035, 2038, 2038, 2033, 2033, 2035, + 2036, 2036, 2038, 2037, 2037, 2038, 2038, 2039, + 2039, 2038, 2038, 2040, 2041, 2040, 2042, 2042, + 2042, 2043, 2042, 2040, 2041, 2040, 2041, 2043, + 2040, 2042, 2042, 2041, 2044, 2045, 2043, 2043, + 2045, 2045, 2047, 2045, 2044, 2046, 2045, 2048, + 2049, 2050, 2050, 2050, 2050, 2048, 2050, 2051, + 2050, 2050, 2052, 2053, 2053, 2055, 2054, 2053, + 2055, 2053, 2053, 2052, 2050, 2052, 2052, 2053, + 2053, 2054, 2053, 2055, 2056, 2055, 2053, 2053, + 2054, 2054, 2056, 2054, 2054, 2056, 2054, 2053, + 2054, 2057, 2055, 2054, 2056, 2057, 2056, 2058, + 2057, 2058, 2059, 2057, 2058, 2057, 2057, 2055, + 2056, 2056, 2055, 2059, 2057, 2055, 2052, 2050, + 2053, 2054, 2052, 2053, 2055, 2056, 2055, 2054, + 2055, 2055, 2053, 2053, 2053, 2054, 2055, 2055, + 2055, 2052, 2054, 2056, 2057, 2059, 2058, 2055, + 2056, 2057, 2056, 2056, 2056, 2057, 2057, 2056, + 2057, 2056, 2057, 2055, 2056, 2057, 2057, 2058, + 2057, 2055, 2055, 2056, 2057, 2056, 2056, 2056, + 2057, 2057, 2058, 2058, 2058, 2059, 2057, 2056, + 2057, 2055, 2053, 2055, 2056, 2056, 2056, 2057, + 2059, 2058, 2058, 2058, 2057, 2060, 2058, 2058, + 2058, 2059, 2059, 2060, 2061, 2060, 2058, 2059, + 2060, 2060, 2058, 2058, 2059, 2058, 2056, 2058, + 2059, 2059, 2058, 2058, 2057, 2059, 2060, 2058, + 2058, 2058, 2057, 2059, 2058, 2056, 2061, 2061, + 2060, 2059, 2061, 2062, 2062, 2062, 2059, 2061, + 2059, 2058, 2060, 2061, 2058, 2058, 2058, 2059, + 2059, 2057, 2060, 2058, 2058, 2057, 2055, 2054, + 2056, 2056, 2059, 2056, 2056, 2059, 2059, 2057, + 2055, 2052, 2051, 2052, 2052, 2052, 2053, 2051, + 2052, 2052, 2051, 2050, 2048, 2049, 2050, 2052, + 2050, 2052, 2051, 2052, 2053, 2052, 2050, 2050, + 2052, 2051, 2051, 2053, 2052, 2051, 2053, 2055, + 2055, 2054, 2053, 2054, 2051, 2052, 2052, 2053, + 2053, 2052, 2052, 2053, 2053, 2049, 2048, 2051, + 2048, 2048, 2049, 2050, 2051, 2049, 2047, 2047, + 2049, 2050, 2051, 2049, 2048, 2045, 2045, 2046, + 2046, 2046, 2045, 2046, 2045, 2043, 2044, 2043, + 2043, 2043, 2044, 2042, 2042, 2042, 2044, 2046, + 2044, 2039, 2040, 2039, 2038, 2040, 2040, 2040, + 2040, 2039, 2039, 2039, 2037, 2036, 2036, 2037, + 2037, 2034, 2036, 2035, 2034, 2033, 2033, 2031, + 2029, 2027, 2029, 2028, 2028, 2029, 2030, 2029, + 2027, 2027, 2026, 2028, 2028, 2026, 2026, 2024, + 2025, 2028, 2027, 2025, 2026, 2027, 2023, 2018, + 2017, 2021, 2020, 2019, 2018, 2016, 2014, 2013, + 2011, 2010, 2007, 2010, 2009, 2006, 2008, 2008, + 2004, 2005, 2006, 2009, 2009, 2010, 2009, 2007, + 2007, 2008, 2007, 2006, 2008, 2009, 2008, 2008, + 2006, 2007, 2009, 2008, 2007, 2007, 2008, 2007, + 2007, 2009, 2008, 2007, 2008, 2009, 2007, 2006, + 2005, 2004, 2007, 2006, 2006, 2004, 2004, 2003, + 2001, 2001, 2002, 2004, 2003, 2003, 2001, 2001, + 2002, 1998, 2000, 1999, 2000, 2001, 2001, 1999, + 2000, 1999, 1998, 1998, 2001, 2000, 1998, 1997, + 1996, 1995, 1994, 1994, 1995, 1995, 1993, 1996, + 1996, 1994, 1992, 1992, 1993, 1991, 1990, 1989, + 1991, 1987, 1988, 1989, 1989, 1989, 1992, 1990, + 1992, 1993, 1992, 1993, 1992, 1990, 1989, 1991, + 1990, 1990, 1988, 1989, 1991, 1991, 1992, 1991, + 1994, 1993, 1991, 1991, 1991, 1991, 1989, 1990, + 1990, 1991, 1989, 1991, 1990, 1991, 1989, 1988, + 1988, 1987, 1987, 1990, 1990, 1988, 1988, 1988, + 1988, 1987, 1987, 1984, 1986, 1985, 1986, 1988, + 1988, 1987, 1987, 1988, 1987, 1988, 1989, 1988, + 1989, 1991, 1990, 1988, 1990, 1989, 1987, 1987, + 1987, 1985, 1986, 1987, 1988, 1985, 1987, 1985, + 1986, 1988, 1988, 1988, 1988, 1987, 1988, 1988, + 1988, 1988, 1989, 1987, 1988, 1989, 1989, 1991, + 1990, 1992, 1990, 1990, 1991, 1991, 1993, 1994, + 1994, 1996, 1993, 1995, 1995, 1998, 1997, 1996, + 1997, 1997, 1998, 1998, 1997, 1999, 1999, 2000, + 2001, 2003, 2004, 2004, 2006, 2005, 2003, 2008, + 2006, 2005, 2005, 2005, 2008, 2009, 2011, 2011, + 2009, 2008, 2010, 2010, 2012, 2013, 2014, 2015, + 2015, 2014, 2015, 2015, 2013, 2013, 2013, 2013, + 2014, 2015, 2018, 2018, 2016, 2016, 2018, 2019, + 2017, 2015, 2017, 2016, 2016, 2016, 2015, 2017, + 2018, 2018, 2017, 2016, 2018, 2017, 2019, 2018, + 2016, 2015, 2014, 2014, 2016, 2018, 2018, 2015, + 2016, 2016, 2017, 2017, 2016, 2015, 2015, 2015, + 2015, 2018, 2016, 2017, 2016, 2014, 2016, 2017, + 2020, 2019, 2018, 2018, 2016, 2017, 2019, 2017, + 2017, 2013, 2015, 2016, 2015, 2015, 2016, 2016, + 2017, 2015, 2013, 2016, 2016, 2017, 2018, 2017, + 2016, 2017, 2016, 2016, 2017, 2019, 2019, 2021, + 2020, 2018, 2019, 2019, 2019, 2018, 2018, 2018, + 2020, 2021, 2022, 2023, 2019, 2018, 2022, 2022, + 2022, 2022, 2023, 2024, 2021, 2022, 2023, 2024, + 2024, 2024, 2025, 2027, 2028, 2029, 2030, 2028, + 2029, 2027, 2028, 2026, 2029, 2028, 2029, 2030, + 2029, 2031, 2029, 2030, 2029, 2028, 2028, 2030, + 2029, 2029, 2031, 2029, 2029, 2030, 2029, 2030, + 2030, 2029, 2027, 2026, 2025, 2024, 2024, 2023, + 2024, 2024, 2024, 2023, 2024, 2024, 2025, 2029, + 2027, 2025, 2027, 2029, 2029, 2033, 2034, 2035, + 2034, 2036, 2038, 2035, 2035, 2036, 2037, 2038, + 2036, 2038, 2038, 2037, 2038, 2039, 2039, 2033, + 2031, 2031, 2030, 2030, 2029, 2031, 2031, 2031, + 2031, 2032, 2034, 2034, 2037, 2038, 2038, 2039, + 2038, 2037, 2040, 2039, 2041, 2040, 2039, 2039, + 2038, 2041, 2038, 2035, 2037, 2037, 2037, 2035, + 2033, 2036, 2037, 2037, 2037, 2036, 2036, 2037, + 2035, 2036, 2038, 2039, 2040, 2039, 2039, 2038, + 2039, 2041, 2042, 2042, 2044, 2042, 2042, 2041, + 2041, 2040, 2041, 2041, 2040, 2041, 2041, 2042, + 2042, 2039, 2041, 2040, 2040, 2038, 2030, 2025, + 2024, 2015, 1982, 1933, 1910, 1911, 1896, 1878, + 1888, 1889, 1882, 1894, 1915, 1938, 1950, 1959, + 1977, 1987, 1989, 2008, 2032, 2054, 2074, 2093, + 2112, 2129, 2145, 2158, 2166, 2164, 2146, 2135, + 2129, 2105, 2079, 2064, 2040, 2017, 1999, 1987, + 1980, 1972, 1963, 1962, 1963, 1965, 1968, 1974, + 1982, 1991, 2001, 2014, 2031, 2043, 2058, 2074, + 2089, 2102, 2120, 2136, 2134, 2127, 2123, 2121, + 2116, 2102, 2092, 2087, 2073, 2048, 2032, 2017, + 1998, 1986, 1973, 1960, 1956, 1949, 1945, 1951, + 1957, 1960, 1964, 1976, 1985, 1994, 2014, 2031, + 2039, 2059, 2079, 2089, 2104, 2113, 2117, 2118, + 2114, 2115, 2117, 2112, 2108, 2106, 2085, 2057, + 2049, 2039, 2026, 2019, 2006, 1988, 1975, 1961, + 1958, 1961, 1957, 1956, 1962, 1965, 1966, 1975, + 1988, 1997, 2008, 2012, 2018, 2029, 2036, 2047, + 2059, 2063, 2061, 2057, 2059, 2065, 2062, 2053, + 2048, 2042, 2029, 2024, 2023, 2023, 2023, 2020, + 2015, 2015, 2020, 2021, 2028, 2040, 2042, 2043, + 2049, 2053, 2053, 2058, 2066, 2068, 2061, 2071, + 2089, 2081, 2072, 2088, 2089, 2074, 2061, 2052, + 2049, 2041, 2027, 2014, 2011, 2007, 2010, 2025, + 2026, 2000, 1982, 1984, 1991, 1993, 1992, 1998, + 1997, 2001, 2015, 2038, 2052, 2052, 2057, 2068, + 2070, 2067, 2071, 2084, 2092, 2087, 2079, 2086, + 2089, 2076, 2091, 2106, 2076, 2063, 2079, 2070, + 2058, 2064, 2060, 2040, 2022, 2035, 2043, 2023, + 2024, 2042, 2037, 2022, 2026, 2044, 2030, 2014, + 2025, 2029, 2023, 2034, 2043, 2048, 2051, 2031, + 2030, 2043, 2037, 2039, 2046, 2041, 2033, 2026, + 2038, 2050, 2044, 2050, 2056, 2047, 2041, 2035, + 2036, 2044, 2035, 2028, 2033, 2028, 2029, 2031, + 2038, 2048, 2027, 2017, 2036, 2036, 2033, 2036, + 2039, 2039, 2031, 2034, 2049, 2050, 2045, 2033, + 2032, 2037, 2022, 2021, 2036, 2032, 2031, 2028, + 2032, 2038, 2028, 2028, 2036, 2025, 2017, 2013, + 2017, 2021, 2014, 2018, 2027, 2020, 2021, 2038, + 2042, 2032, 2021, 2026, 2036, 2026, 2014, 2021, + 2023, 2009, 2001, 2003, 2002, 1998, 1986, 1985, + 1992, 1981, 1979, 2006, 2013, 2003, 2013, 2026, + 2027, 2029, 2047, 2064, 2055, 2040, 2052, 2069, + 2069, 2063, 2053, 2052, 2046, 2028, 2007, 1999, + 1993, 1985, 1981, 1977, 1976, 1971, 1976, 1986, + 1977, 1973, 1984, 1996, 2006, 2018, 2029, 2038, + 2045, 2052, 2073, 2092, 2105, 2115, 2106, 2063, + 2025, 2028, 2033, 1998, 1963, 1962, 1957, 1928, + 1932, 1964, 1977, 1980, 1979, 1996, 2011, 2003, + 2001, 2012, 2028, 2039, 2041, 2060, 2086, 2091, + 2093, 2112, 2108, 2078, 2072, 2073, 2047, 2018, + 1989, 1972, 1968, 1939, 1916, 1928, 1925, 1906, + 1904, 1923, 1950, 1953, 1945, 1974, 2006, 2012, + 2042, 2095, 2105, 2098, 2110, 2108, 2097, 2111, + 2111, 2067, 2035, 2022, 1989, 1970, 1956, 1929, + 1915, 1889, 1861, 1867, 1873, 1875, 1893, 1898, + 1916, 1937, 1945, 1985, 2034, 2062, 2080, 2101, + 2113, 2117, 2142, 2178, 2174, 2152, 2142, 2126, + 2110, 2077, 2040, 2046, 2017, 1943, 1932, 1944, + 1911, 1882, 1892, 1928, 1922, 1899, 1949, 1987, + 1968, 1974, 2010, 2042, 2041, 2024, 2063, 2094, + 2082, 2105, 2114, 2114, 2123, 2111, 2131, 2121, + 2064, 2060, 2046, 2015, 2001, 1965, 1958, 1953, + 1938, 1957, 1955, 1979, 2008, 1983, 2027, 2079, + 2038, 2052, 2115, 2120, 2093, 2092, 2122, 2126, + 2103, 2103, 2109, 2106, 2073, 2025, 2035, 2018, + 1956, 1950, 1939, 1887, 1861, 1850, 1851, 1873, + 1863, 1870, 1912, 1936, 1960, 1994, 2022, 2060, + 2082, 2081, 2114, 2142, 2132, 2146, 2165, 2166, + 2156, 2137, 2143, 2144, 2100, 2076, 2083, 2051, + 2018, 2004, 1984, 1971, 1946, 1935, 1955, 1962, + 1973, 1991, 1990, 2012, 2041, 2054, 2094, 2122, + 2104, 2120, 2135, 2114, 2136, 2152, 2137, 2137, + 2123, 2128, 2127, 2082, 2083, 2077, 2017, 1986, + 1969, 1938, 1910, 1894, 1901, 1896, 1905, 1928, + 1921, 1958, 2016, 2007, 2012, 2046, 2031, 2038, + 2079, 2074, 2074, 2093, 2091, 2102, 2131, 2117, + 2102, 2109, 2101, 2084, 2076, 2073, 2058, 2032, + 2016, 2006, 2004, 2009, 1990, 1981, 2006, 1996, + 1982, 2010, 2035, 2023, 2021, 2040, 2045, 2035, + 2033, 2065, 2079, 2050, 2047, 2074, 2093, 2116, + 2124, 2123, 2129, 2117, 2126, 2145, 2157, 2161, + 2115, 2056, 2011, 1943, 1899, 1882, 1861, 1837, + 1795, 1781, 1812, 1825, 1842, 1895, 1920, 1929, + 1948, 1966, 1998, 2039, 2072, 2100, 2139, 2179, + 2230, 2299, 2359, 2371, 2355, 2347, 2345, 2314, + 2274, 2244, 2183, 2096, 2018, 1968, 1954, 1911, + 1860, 1868, 1870, 1850, 1854, 1874, 1916, 1951, + 1948, 1976, 2058, 2103, 2106, 2166, 2246, 2250, + 2237, 2292, 2361, 2357, 2314, 2333, 2334, 2254, + 2225, 2223, 2161, 2099, 2047, 2009, 2004, 1971, + 1936, 1926, 1887, 1852, 1883, 1911, 1896, 1942, + 1999, 1955, 1965, 2055, 2063, 2096, 2166, 2165, + 2156, 2152, 2153, 2179, 2174, 2160, 2142, 2090, + 2086, 2085, 2045, 2052, 2047, 2003, 1985, 1996, + 2024, 2019, 2009, 2035, 2003, 1957, 1988, 2028, + 2047, 2039, 2015, 2029, 2040, 2024, 2046, 2086, + 2086, 2049, 2036, 2066, 2056, 2031, 2046, 2058, + 2024, 2008, 2029, 2032, 2023, 2038, 2043, 2026, + 2034, 2052, 2059, 2071, 2082, 2069, 2042, 2059, + 2091, 2079, 2065, 2085, 2086, 2066, 2100, 2140, + 2106, 2090, 2131, 2120, 2080, 2087, 2088, 2031, + 1987, 1986, 1965, 1930, 1928, 1957, 1972, 1962, + 1969, 2023, 2075, 2066, 2085, 2149, 2139, 2113, + 2166, 2204, 2159, 2145, 2185, 2183, 2164, 2192, + 2207, 2198, 2220, 2226, 2194, 2186, 2185, 2160, + 2127, 2116, 2092, 2018, 1990, 2024, 2011, 1975, + 2015, 2069, 2056, 2051, 2112, 2149, 2131, 2136, + 2165, 2167, 2147, 2143, 2161, 2183, 2178, 2173, + 2217, 2237, 2217, 2227, 2217, 2182, 2153, 2107, + 2080, 2073, 2026, 1969, 1939, 1909, 1879, 1869, + 1888, 1899, 1891, 1904, 1935, 1966, 1995, 2030, + 2069, 2105, 2107, 2085, 2107, 2134, 2109, 2104, + 2149, 2159, 2133, 2156, 2196, 2187, 2184, 2200, + 2191, 2162, 2140, 2110, 2059, 1991, 1940, 1916, + 1882, 1870, 1864, 1831, 1829, 1866, 1889, 1900, + 1928, 1948, 1934, 1917, 1941, 1954, 1934, 1942, + 1953, 1937, 1957, 1998, 2036, 2076, 2104, 2124, + 2126, 2111, 2113, 2116, 2079, 2029, 1992, 1945, + 1883, 1881, 1918, 1894, 1878, 1928, 1936, 1936, + 1997, 2025, 2012, 2037, 2053, 2045, 2058, 2068, + 2078, 2105, 2120, 2110, 2107, 2116, 2123, 2133, + 2150, 2145, 2135, 2139, 2111, 2106, 2141, 2125, + 2099, 2107, 2100, 2097, 2109, 2113, 2126, 2133, + 2135, 2158, 2179, 2177, 2167, 2177, 2189, 2156, + 2127, 2146, 2115, 2068, 2098, 2095, 2055, 2055, + 2064, 2077, 2086, 2096, 2135, 2152, 2148, 2171, + 2176, 2162, 2172, 2168, 2159, 2144, 2126, 2121, + 2095, 2097, 2110, 2083, 2090, 2108, 2094, 2086, + 2083, 2064, 2042, 2027, 2022, 2000, 1986, 1994, + 1989, 1997, 2002, 2004, 2048, 2075, 2066, 2096, + 2114, 2096, 2102, 2113, 2081, 2049, 2051, 2061, + 2039, 2025, 2034, 2017, 2016, 2032, 2055, 2065, + 2063, 2080, 2084, 2063, 2042, 2053, 2030, 1987, + 2002, 1986, 1928, 1937, 1953, 1924, 1937, 1982, + 1985, 1973, 1983, 1989, 1971, 1963, 1975, 1953, + 1915, 1900, 1906, 1928, 1934, 1936, 1935, 1944, + 1964, 1966, 1954, 1945, 1926, 1895, 1876, 1856, + 1826, 1814, 1808, 1791, 1785, 1797, 1802, 1819, + 1840, 1849, 1875, 1900, 1890, 1886, 1908, 1923, + 1913, 1891, 1897, 1915, 1902, 1902, 1923, 1935, + 1960, 1988, 2021, 2066, 2093, 2121, 2153, 2175, + 2204, 2227, 2229, 2241, 2257, 2266, 2270, 2291, + 2314, 2318, 2338, 2362, 2337, 2306, 2310, 2309, + 2272, 2231, 2194, 2176, 2193, 2173, 2148, 2166, + 2180, 2188, 2212, 2244, 2271, 2300, 2316, 2313, + 2346, 2371, 2353, 2356, 2371, 2361, 2340, 2332, + 2340, 2330, 2322, 2329, 2336, 2339, 2331, 2337, + 2354, 2328, 2297, 2297, 2276, 2254, 2251, 2251, + 2267, 2287, 2299, 2312, 2353, 2396, 2393, 2380, + 2388, 2374, 2323, 2274, 2243, 2211, 2164, 2120, + 2103, 2099, 2073, 2055, 2068, 2065, 2049, 2043, + 2037, 2025, 2017, 2011, 2000, 1995, 1992, 1977, + 1967, 1979, 1977, 1955, 1948, 1951, 1946, 1923, + 1905, 1895, 1864, 1815, 1765, 1733, 1683, 1627, + 1593, 1563, 1542, 1544, 1551, 1563, 1590, 1613, + 1631, 1654, 1676, 1692, 1698, 1703, 1716, 1731, + 1743, 1767, 1789, 1802, 1817, 1839, 1859, 1863, + 1856, 1843, 1827, 1801, 1774, 1754, 1727, 1695, + 1677, 1654, 1635, 1635, 1625, 1610, 1618, 1634, + 1634, 1643, 1665, 1681, 1689, 1711, 1726, 1742, + 1774, 1815, 1880, 1951, 2022, 2119, 2197, 2263, + 2363, 2462, 2534, 2609, 2666, 2684, 2710, 2746, + 2766, 2776, 2767, 2757, 2763, 2765, 2770, 2760, + 2731, 2718, 2701, 2673, 2666, 2653, 2622, 2604, + 2616, 2632, 2630, 2655, 2718, 2777, 2832, 2873, + 2915, 2982, 3039, 3059, 3076, 3083, 3031, 2947, + 2886, 2790, 2659, 2541, 2422, 2298, 2187, 2089, + 2012, 1960, 1912, 1862, 1820, 1812, 1835, 1854, + 1884, 1926, 1963, 1992, 2034, 2093, 2133, 2162, + 2205, 2232, 2233, 2245, 2258, 2252, 2247, 2228, + 2184, 2136, 2088, 2040, 1994, 1963, 1932, 1898, + 1889, 1908, 1931, 1964, 2010, 2050, 2083, 2116, + 2151, 2177, 2197, 2209, 2200, 2178, 2150, 2115, + 2066, 2015, 1957, 1883, 1804, 1730, 1654, 1568, + 1487, 1408, 1326, 1253, 1202, 1167, 1145, 1151, + 1180, 1227, 1295, 1377, 1462, 1555, 1648, 1727, + 1796, 1855, 1892, 1913, 1929, 1931, 1916, 1892, + 1856, 1820, 1784, 1738, 1689, 1637, 1584, 1541, + 1504, 1470, 1443, 1431, 1421, 1422, 1454, 1496, + 1546, 1619, 1694, 1765, 1857, 1957, 2043, 2126, + 2187, 2228, 2280, 2307, 2307, 2322, 2309, 2280, + 2262, 2240, 2227, 2237, 2241, 2254, 2279, 2311, + 2352, 2392, 2436, 2473, 2505, 2567, 2638, 2668, + 2697, 2757, 2812, 2856, 2902, 2928, 2945, 2967, + 2985, 2986, 2985, 2982, 2970, 2957, 2932, 2917, + 2937, 2958, 2961, 2977, 3007, 3023, 3065, 3135, + 3154, 3137, 3091, 2996, 2881, 2762, 2607, 2430, + 2270, 2102, 1967, 1888, 1827, 1784, 1774, 1771, + 1771, 1779, 1790, 1792, 1788, 1781, 1776, 1780, + 1798, 1843, 1889, 1941, 2014, 2092, 2170, 2242, + 2299, 2344, 2381, 2408, 2411, 2392, 2350, 2297, + 2244, 2188, 2151, 2119, 2096, 2080, 2086, 2108, + 2139, 2178, 2208, 2221, 2219, 2211, 2187, 2143, + 2087, 2017, 1940, 1863, 1792, 1733, 1681, 1631, + 1583, 1530, 1478, 1435, 1393, 1353, 1316, 1282, + 1257, 1246, 1248, 1269, 1308, 1345, 1390, 1452, + 1515, 1573, 1631, 1676, 1708, 1738, 1755, 1752, + 1740, 1718, 1678, 1636, 1597, 1560, 1527, 1500, + 1476, 1460, 1463, 1478, 1487, 1506, 1540, 1576, + 1612, 1668, 1726, 1786, 1863, 1927, 1999, 2116, + 2199, 2257, 2356, 2424, 2455, 2493, 2514, 2529, + 2536, 2529, 2516, 2496, 2487, 2480, 2468, 2461, + 2452, 2449, 2466, 2501, 2527, 2557, 2594, 2636, + 2682, 2733, 2769, 2807, 2872, 2910, 2921, 2966, + 3030, 3088, 3147, 3185, 3218, 3259, 3314, 3374, + 3388, 3375, 3362, 3368, 3375, 3366, 3338, 3227, + 3059, 2936, 2802, 2623, 2447, 2265, 2083, 1951, + 1873, 1837, 1819, 1812, 1806, 1806, 1824, 1841, + 1851, 1853, 1825, 1786, 1762, 1759, 1778, 1799, + 1811, 1841, 1898, 1971, 2050, 2110, 2151, 2179, + 2195, 2203, 2203, 2192, 2176, 2146, 2138, 2149, + 2172, 2204, 2235, 2273, 2315, 2363, 2418, 2466, + 2496, 2505, 2495, 2469, 2439, 2397, 2321, 2217, + 2109, 2007, 1915, 1837, 1772, 1708, 1649, 1602, + 1566, 1526, 1470, 1398, 1324, 1250, 1186, 1129, + 1086, 1072, 1075, 1104, 1155, 1226, 1311, 1390, + 1462, 1520, 1560, 1586, 1597, 1584, 1562, 1537, + 1500, 1471, 1448, 1423, 1402, 1392, 1403, 1417, + 1436, 1462, 1497, 1531, 1571, 1613, 1654, 1693, + 1722, 1758, 1814, 1873, 1932, 1999, 2068, 2129, + 2200, 2288, 2360, 2394, 2415, 2415, 2392, 2377, + 2356, 2314, 2263, 2220, 2206, 2218, 2251, 2294, + 2337, 2363, 2393, 2438, 2495, 2547, 2566, 2559, + 2562, 2588, 2624, 2666, 2709, 2732, 2741, 2785, + 2857, 2907, 2948, 2987, 3028, 3078, 3140, 3206, + 3255, 3286, 3297, 3318, 3359, 3381, 3376, 3373, + 3353, 3261, 3141, 3049, 2919, 2735, 2553, 2360, + 2188, 2078, 2000, 1936, 1890, 1861, 1845, 1848, + 1861, 1863, 1847, 1832, 1817, 1805, 1799, 1786, + 1774, 1775, 1787, 1792, 1805, 1849, 1912, 1961, + 1996, 2042, 2087, 2111, 2118, 2115, 2101, 2083, + 2073, 2081, 2105, 2128, 2151, 2186, 2238, 2297, + 2350, 2399, 2441, 2474, 2487, 2480, 2458, 2418, + 2344, 2245, 2137, 2031, 1931, 1843, 1758, 1680, + 1623, 1574, 1514, 1466, 1423, 1358, 1288, 1243, + 1198, 1146, 1111, 1103, 1113, 1150, 1195, 1244, + 1311, 1383, 1443, 1495, 1540, 1567, 1569, 1559, + 1540, 1517, 1485, 1447, 1408, 1367, 1337, 1320, + 1311, 1321, 1340, 1356, 1389, 1459, 1526, 1582, + 1659, 1739, 1799, 1864, 1928, 1978, 2035, 2088, + 2126, 2179, 2241, 2284, 2325, 2368, 2389, 2399, + 2414, 2406, 2385, 2367, 2333, 2295, 2294, 2309, + 2314, 2334, 2371, 2399, 2441, 2502, 2553, 2596, + 2635, 2651, 2679, 2731, 2789, 2823, 2844, 2861, + 2884, 2921, 2960, 3004, 3027, 3029, 3057, 3111, + 3181, 3251, 3291, 3320, 3363, 3407, 3433, 3458, + 3475, 3419, 3287, 3161, 3060, 2925, 2788, 2641, + 2459, 2316, 2249, 2211, 2185, 2170, 2134, 2079, + 2044, 2037, 2017, 1964, 1880, 1795, 1725, 1681, + 1658, 1653, 1655, 1661, 1694, 1754, 1843, 1947, + 2015, 2054, 2081, 2102, 2127, 2137, 2118, 2081, + 2049, 2039, 2058, 2094, 2124, 2144, 2165, 2204, + 2265, 2332, 2388, 2414, 2420, 2416, 2411, 2405, + 2381, 2315, 2216, 2133, 2069, 2004, 1955, 1909, + 1847, 1795, 1757, 1709, 1660, 1607, 1516, 1410, + 1330, 1252, 1168, 1113, 1080, 1063, 1082, 1126, + 1180, 1255, 1338, 1398, 1449, 1496, 1523, 1519, + 1495, 1465, 1438, 1404, 1357, 1317, 1292, 1272, + 1262, 1270, 1293, 1314, 1343, 1394, 1447, 1498, + 1554, 1607, 1645, 1702, 1762, 1800, 1846, 1912, + 1975, 2039, 2110, 2189, 2264, 2336, 2396, 2435, + 2467, 2473, 2457, 2433, 2402, 2364, 2333, 2317, + 2315, 2329, 2356, 2391, 2441, 2503, 2557, 2593, + 2632, 2678, 2718, 2738, 2745, 2762, 2784, 2803, + 2835, 2876, 2895, 2927, 2997, 3046, 3098, 3186, + 3242, 3273, 3344, 3410, 3434, 3453, 3465, 3456, + 3444, 3411, 3316, 3201, 3100, 2979, 2842, 2716, + 2594, 2480, 2382, 2314, 2287, 2267, 2228, 2179, + 2143, 2119, 2086, 2047, 2013, 1979, 1939, 1893, + 1847, 1832, 1837, 1824, 1802, 1801, 1828, 1864, + 1900, 1931, 1955, 1974, 1982, 1989, 1997, 2002, + 1990, 1983, 2001, 2040, 2081, 2108, 2145, 2201, + 2261, 2317, 2368, 2413, 2445, 2458, 2460, 2458, + 2449, 2422, 2357, 2270, 2201, 2148, 2088, 2020, + 1948, 1869, 1802, 1737, 1670, 1617, 1554, 1464, + 1386, 1338, 1296, 1250, 1212, 1189, 1191, 1213, + 1236, 1271, 1320, 1364, 1392, 1423, 1454, 1468, + 1455, 1429, 1400, 1373, 1340, 1305, 1263, 1234, + 1211, 1192, 1197, 1219, 1242, 1268, 1303, 1353, + 1421, 1491, 1555, 1618, 1679, 1757, 1830, 1879, + 1944, 2019, 2070, 2119, 2181, 2235, 2279, 2319, + 2346, 2361, 2380, 2383, 2365, 2357, 2355, 2347, + 2335, 2344, 2368, 2396, 2431, 2472, 2520, 2574, + 2619, 2666, 2725, 2772, 2805, 2838, 2875, 2914, + 2949, 2979, 3001, 3024, 3055, 3082, 3106, 3134, + 3177, 3221, 3258, 3312, 3367, 3408, 3456, 3495, + 3502, 3481, 3419, 3321, 3218, 3105, 2971, 2827, + 2692, 2583, 2498, 2440, 2404, 2379, 2350, 2316, + 2286, 2255, 2220, 2176, 2115, 2057, 1997, 1929, + 1867, 1819, 1781, 1752, 1726, 1714, 1726, 1754, + 1793, 1837, 1879, 1922, 1953, 1968, 1976, 1982, + 1979, 1967, 1966, 1976, 1985, 1999, 2030, 2074, + 2130, 2188, 2247, 2309, 2355, 2385, 2403, 2412, + 2403, 2378, 2338, 2284, 2218, 2152, 2109, 2076, + 2025, 1959, 1898, 1840, 1775, 1715, 1658, 1580, + 1500, 1425, 1356, 1307, 1269, 1221, 1177, 1165, + 1162, 1160, 1184, 1220, 1250, 1276, 1309, 1337, + 1359, 1372, 1375, 1364, 1345, 1319, 1288, 1252, + 1217, 1188, 1163, 1152, 1157, 1178, 1204, 1244, + 1288, 1344, 1407, 1466, 1524, 1589, 1649, 1710, + 1771, 1834, 1901, 1960, 2014, 2073, 2125, 2176, + 2223, 2261, 2295, 2329, 2348, 2362, 2376, 2384, + 2391, 2403, 2417, 2418, 2421, 2439, 2465, 2501, + 2540, 2581, 2624, 2676, 2722, 2765, 2824, 2870, + 2891, 2916, 2943, 2961, 2993, 3028, 3063, 3097, + 3136, 3183, 3238, 3300, 3345, 3372, 3400, 3428, + 3440, 3420, 3379, 3313, 3222, 3138, 3059, 2955, + 2843, 2738, 2634, 2561, 2514, 2465, 2418, 2379, + 2338, 2299, 2283, 2268, 2230, 2181, 2127, 2056, + 1974, 1906, 1857, 1802, 1741, 1704, 1690, 1699, + 1727, 1761, 1793, 1825, 1850, 1868, 1881, 1891, + 1887, 1875, 1873, 1881, 1885, 1895, 1920, 1950, + 1988, 2035, 2085, 2133, 2175, 2214, 2248, 2264, + 2275, 2286, 2280, 2258, 2233, 2198, 2148, 2109, + 2083, 2027, 1964, 1908, 1840, 1773, 1732, 1686, + 1620, 1566, 1512, 1443, 1392, 1359, 1301, 1247, + 1218, 1187, 1163, 1171, 1189, 1205, 1224, 1252, + 1279, 1300, 1323, 1338, 1335, 1319, 1303, 1288, + 1265, 1238, 1213, 1189, 1181, 1186, 1187, 1195, + 1223, 1250, 1283, 1334, 1388, 1436, 1500, 1563, + 1619, 1679, 1740, 1802, 1859, 1914, 1962, 2008, + 2057, 2107, 2156, 2209, 2258, 2293, 2321, 2359, + 2388, 2407, 2427, 2442, 2446, 2445, 2452, 2471, + 2494, 2516, 2543, 2579, 2620, 2666, 2717, 2769, + 2816, 2854, 2889, 2933, 2971, 3001, 3042, 3079, + 3106, 3147, 3185, 3217, 3254, 3285, 3299, 3323, + 3344, 3334, 3313, 3300, 3253, 3184, 3133, 3067, + 2976, 2893, 2808, 2725, 2666, 2615, 2555, 2509, + 2470, 2425, 2393, 2374, 2345, 2315, 2282, 2231, + 2180, 2124, 2060, 2004, 1955, 1900, 1851, 1821, + 1799, 1792, 1804, 1815, 1827, 1841, 1848, 1860, + 1876, 1881, 1882, 1888, 1893, 1893, 1898, 1914, + 1932, 1951, 1980, 2011, 2047, 2082, 2116, 2147, + 2170, 2184, 2199, 2208, 2201, 2187, 2157, 2122, + 2101, 2066, 2014, 1960, 1903, 1839, 1794, 1760, + 1711, 1669, 1632, 1587, 1555, 1537, 1503, 1467, + 1444, 1412, 1372, 1358, 1353, 1341, 1344, 1350, + 1354, 1363, 1384, 1393, 1401, 1402, 1397, 1393, + 1383, 1358, 1334, 1310, 1288, 1273, 1266, 1266, + 1268, 1275, 1299, 1334, 1370, 1415, 1467, 1515, + 1564, 1620, 1676, 1722, 1775, 1825, 1861, 1903, + 1945, 1981, 2024, 2073, 2109, 2143, 2190, 2241, + 2276, 2320, 2372, 2402, 2426, 2457, 2481, 2498, + 2521, 2544, 2563, 2584, 2603, 2629, 2662, 2696, + 2729, 2758, 2785, 2808, 2839, 2876, 2907, 2936, + 2972, 3010, 3045, 3083, 3121, 3150, 3175, 3200, + 3217, 3234, 3245, 3238, 3220, 3201, 3178, 3145, + 3107, 3061, 3001, 2936, 2877, 2827, 2774, 2718, + 2665, 2610, 2561, 2522, 2484, 2447, 2410, 2366, + 2317, 2266, 2210, 2155, 2110, 2059, 2010, 1968, + 1935, 1910, 1905, 1903, 1896, 1898, 1906, 1903, + 1903, 1912, 1912, 1910, 1919, 1926, 1926, 1927, + 1937, 1948, 1952, 1965, 1980, 1986, 2000, 2015, + 2021, 2031, 2046, 2058, 2061, 2059, 2048, 2036, + 2025, 2005, 1976, 1943, 1905, 1860, 1823, 1798, + 1772, 1745, 1719, 1685, 1659, 1644, 1621, 1597, + 1580, 1550, 1511, 1484, 1466, 1451, 1450, 1453, + 1443, 1434, 1441, 1454, 1460, 1458, 1453, 1445, + 1434, 1423, 1406, 1386, 1371, 1360, 1343, 1334, + 1335, 1333, 1336, 1350, 1370, 1394, 1429, 1471, + 1509, 1546, 1585, 1641, 1696, 1740, 1781, 1824, + 1865, 1905, 1950, 1988, 2018, 2056, 2093, 2130, + 2176, 2220, 2252, 2289, 2337, 2370, 2389, 2427, + 2464, 2479, 2504, 2542, 2566, 2591, 2627, 2654, + 2677, 2712, 2753, 2788, 2812, 2841, 2886, 2932, + 2976, 3012, 3042, 3078, 3118, 3143, 3160, 3180, + 3197, 3204, 3206, 3206, 3202, 3195, 3183, 3166, + 3140, 3105, 3074, 3045, 3003, 2952, 2903, 2859, + 2823, 2780, 2725, 2682, 2646, 2608, 2573, 2532, + 2486, 2443, 2399, 2342, 2287, 2244, 2199, 2152, + 2109, 2065, 2033, 2022, 2002, 1975, 1960, 1952, + 1938, 1935, 1934, 1928, 1921, 1922, 1924, 1924, + 1933, 1944, 1947, 1958, 1973, 1981, 1985, 1992, + 2002, 2004, 2004, 2013, 2020, 2019, 2009, 1999, + 1993, 1984, 1969, 1945, 1904, 1864, 1831, 1797, + 1768, 1741, 1709, 1678, 1655, 1641, 1628, 1613, + 1605, 1595, 1572, 1557, 1554, 1547, 1537, 1535, + 1531, 1522, 1520, 1525, 1520, 1512, 1509, 1497, + 1480, 1465, 1446, 1427, 1406, 1392, 1378, 1364, + 1360, 1354, 1347, 1355, 1374, 1390, 1413, 1439, + 1471, 1510, 1558, 1606, 1657, 1707, 1748, 1791, + 1834, 1869, 1906, 1940, 1965, 1998, 2029, 2063, + 2099, 2138, 2175, 2211, 2250, 2283, 2310, 2340, + 2370, 2396, 2422, 2455, 2477, 2504, 2533, 2565, + 2596, 2632, 2667, 2695, 2730, 2768, 2806, 2845, + 2889, 2920, 2951, 2991, 3035, 3069, 3094, 3113, + 3129, 3141, 3149, 3150, 3145, 3139, 3127, 3111, + 3102, 3091, 3065, 3039, 3017, 2982, 2948, 2918, + 2886, 2846, 2807, 2770, 2729, 2696, 2669, 2632, + 2587, 2544, 2495, 2441, 2389, 2344, 2289, 2232, + 2189, 2143, 2101, 2072, 2048, 2023, 2002, 1987, + 1970, 1954, 1949, 1935, 1922, 1923, 1914, 1906, + 1911, 1919, 1927, 1936, 1946, 1950, 1955, 1959, + 1959, 1950, 1942, 1930, 1922, 1916, 1905, 1889, + 1879, 1871, 1854, 1836, 1807, 1772, 1738, 1707, + 1679, 1653, 1632, 1608, 1582, 1569, 1559, 1542, + 1534, 1531, 1515, 1497, 1492, 1487, 1482, 1485, + 1487, 1481, 1478, 1482, 1484, 1479, 1473, 1458, + 1437, 1416, 1395, 1372, 1348, 1332, 1317, 1303, + 1295, 1293, 1294, 1301, 1313, 1328, 1347, 1367, + 1390, 1421, 1458, 1496, 1534, 1576, 1621, 1660, + 1696, 1734, 1765, 1797, 1829, 1853, 1877, 1910, + 1939, 1970, 2010, 2049, 2077, 2111, 2144, 2166, + 2196, 2231, 2253, 2281, 2309, 2331, 2361, 2403, + 2436, 2469, 2507, 2536, 2567, 2600, 2636, 2673, + 2707, 2743, 2776, 2812, 2856, 2893, 2921, 2950, + 2976, 2994, 3003, 3010, 3014, 3014, 3015, 3013, + 3005, 2999, 2989, 2978, 2966, 2953, 2939, 2915, + 2891, 2861, 2835, 2809, 2781, 2758, 2734, 2705, + 2666, 2628, 2588, 2532, 2478, 2426, 2371, 2312, + 2257, 2206, 2159, 2124, 2094, 2064, 2034, 2016, + 1990, 1973, 1967, 1947, 1929, 1921, 1907, 1890, + 1888, 1892, 1893, 1897, 1902, 1908, 1907, 1908, + 1906, 1893, 1879, 1864, 1849, 1830, 1814, 1803, + 1789, 1775, 1765, 1748, 1722, 1693, 1662, 1629, + 1597, 1568, 1539, 1512, 1496, 1481, 1467, 1458, + 1452, 1437, 1425, 1412, 1399, 1390, 1389, 1391, + 1394, 1392, 1394, 1404, 1406, 1410, 1411, 1403, + 1383, 1364, 1345, 1318, 1294, 1276, 1257, 1238, + 1231, 1226, 1222, 1227, 1234, 1240, 1255, 1274, + 1291, 1314, 1346, 1384, 1420, 1460, 1504, 1544, + 1583, 1622, 1651, 1679, 1707, 1733, 1750, 1773, + 1802, 1829, 1857, 1892, 1927, 1955, 1985, 2014, + 2040, 2061, 2090, 2114, 2132, 2160, 2194, 2226, + 2265, 2306, 2346, 2383, 2419, 2459, 2497, 2534, + 2571, 2603, 2633, 2671, 2709, 2742, 2778, 2811, + 2836, 2864, 2886, 2902, 2915, 2925, 2924, 2932, + 2938, 2943, 2943, 2944, 2945, 2942, 2941, 2935, + 2923, 2914, 2897, 2878, 2861, 2840, 2818, 2800, + 2779, 2755, 2726, 2693, 2651, 2602, 2556, 2504, + 2453, 2399, 2341, 2291, 2243, 2208, 2172, 2138, + 2111, 2082, 2053, 2035, 2022, 2002, 1987, 1977, + 1958, 1944, 1939, 1934, 1931, 1932, 1934, 1930, + 1928, 1925, 1916, 1898, 1883, 1861, 1839, 1824, + 1810, 1800, 1787, 1775, 1762, 1741, 1714, 1682, + 1650, 1616, 1578, 1545, 1514, 1482, 1464, 1449, + 1430, 1420, 1414, 1396, 1380, 1373, 1367, 1355, + 1352, 1349, 1345, 1346, 1352, 1360, 1362, 1365, + 1366, 1355, 1341, 1332, 1317, 1294, 1277, 1255, + 1233, 1221, 1215, 1209, 1208, 1212, 1212, 1219, + 1233, 1250, 1270, 1293, 1319, 1353, 1388, 1425, + 1469, 1515, 1552, 1580, 1612, 1636, 1655, 1678, + 1698, 1712, 1734, 1769, 1789, 1813, 1848, 1878, + 1901, 1929, 1952, 1969, 1991, 2013, 2035, 2059, + 2092, 2123, 2156, 2192, 2233, 2275, 2314, 2360, + 2404, 2440, 2479, 2518, 2555, 2595, 2632, 2669, + 2705, 2739, 2766, 2794, 2818, 2836, 2861, 2881, + 2889, 2901, 2915, 2929, 2946, 2966, 2973, 2975, + 2988, 2990, 2982, 2985, 2976, 2953, 2937, 2926, + 2910, 2889, 2876, 2858, 2831, 2800, 2767, 2722, + 2670, 2624, 2575, 2517, 2462, 2414, 2361, 2314, + 2276, 2243, 2208, 2180, 2156, 2125, 2099, 2085, + 2068, 2051, 2041, 2029, 2015, 2008, 2007, 2011, + 2013, 2010, 2007, 1996, 1985, 1972, 1958, 1933, + 1908, 1892, 1873, 1855, 1845, 1836, 1821, 1807, + 1790, 1762, 1733, 1706, 1674, 1638, 1604, 1576, + 1547, 1521, 1503, 1483, 1462, 1449, 1431, 1410, + 1396, 1383, 1366, 1360, 1355, 1346, 1343, 1343, + 1343, 1343, 1342, 1340, 1334, 1323, 1311, 1297, + 1283, 1268, 1251, 1236, 1220, 1209, 1204, 1200, + 1201, 1202, 1208, 1215, 1227, 1244, 1262, 1287, + 1318, 1352, 1385, 1424, 1459, 1490, 1522, 1554, + 1578, 1598, 1620, 1637, 1656, 1680, 1711, 1740, + 1764, 1797, 1826, 1854, 1884, 1916, 1945, 1967, + 1994, 2019, 2044, 2074, 2108, 2145, 2178, 2217, + 2253, 2294, 2334, 2374, 2419, 2463, 2506, 2552, + 2594, 2640, 2681, 2717, 2756, 2793, 2820, 2849, + 2878, 2903, 2924, 2948, 2968, 2982, 3009, 3030, + 3045, 3064, 3082, 3095, 3100, 3105, 3103, 3093, + 3089, 3073, 3057, 3045, 3028, 3009, 2985, 2956, + 2922, 2881, 2833, 2776, 2716, 2661, 2599, 2537, + 2483, 2428, 2378, 2336, 2295, 2260, 2229, 2206, + 2178, 2153, 2136, 2116, 2102, 2092, 2084, 2069, + 2061, 2058, 2057, 2055, 2056, 2054, 2046, 2036, + 2025, 2008, 1990, 1969, 1946, 1923, 1903, 1888, + 1873, 1860, 1852, 1833, 1811, 1788, 1760, 1735, + 1711, 1686, 1662, 1634, 1608, 1593, 1569, 1541, + 1518, 1491, 1454, 1426, 1406, 1382, 1369, 1364, + 1347, 1326, 1324, 1318, 1307, 1298, 1290, 1277, + 1261, 1252, 1242, 1229, 1219, 1211, 1195, 1178, + 1171, 1163, 1149, 1145, 1145, 1137, 1139, 1149, + 1159, 1173, 1191, 1215, 1239, 1265, 1293, 1321, + 1353, 1382, 1414, 1446, 1469, 1497, 1524, 1551, + 1583, 1614, 1642, 1665, 1697, 1727, 1753, 1787, + 1818, 1840, 1868, 1896, 1921, 1948, 1980, 2009, + 2040, 2077, 2113, 2149, 2187, 2226, 2267, 2309, + 2357, 2405, 2452, 2501, 2549, 2596, 2644, 2685, + 2722, 2759, 2797, 2831, 2863, 2900, 2934, 2958, + 2993, 3021, 3042, 3068, 3094, 3116, 3134, 3152, + 3165, 3173, 3181, 3180, 3173, 3164, 3154, 3139, + 3123, 3103, 3075, 3049, 3014, 2979, 2933, 2869, + 2798, 2732, 2669, 2597, 2532, 2466, 2396, 2341, + 2299, 2259, 2228, 2201, 2176, 2148, 2125, 2107, + 2094, 2082, 2076, 2066, 2044, 2034, 2033, 2031, + 2033, 2038, 2032, 2023, 2020, 2010, 1995, 1976, + 1956, 1932, 1907, 1887, 1870, 1854, 1843, 1834, + 1811, 1788, 1770, 1748, 1728, 1712, 1700, 1684, + 1667, 1652, 1636, 1615, 1592, 1569, 1534, 1489, + 1447, 1408, 1380, 1354, 1328, 1301, 1280, 1260, + 1242, 1231, 1219, 1201, 1179, 1159, 1137, 1121, + 1108, 1095, 1087, 1077, 1069, 1064, 1058, 1055, + 1057, 1054, 1051, 1059, 1064, 1070, 1081, 1096, + 1113, 1134, 1158, 1179, 1200, 1218, 1240, 1267, + 1293, 1322, 1349, 1373, 1409, 1452, 1491, 1529, + 1570, 1605, 1632, 1663, 1693, 1718, 1749, 1780, + 1799, 1822, 1858, 1896, 1928, 1963, 2001, 2033, + 2066, 2107, 2141, 2177, 2223, 2264, 2301, 2351, + 2400, 2449, 2498, 2546, 2593, 2636, 2683, 2730, + 2769, 2810, 2858, 2901, 2939, 2986, 3032, 3065, + 3101, 3137, 3164, 3193, 3219, 3236, 3257, 3273, + 3275, 3276, 3281, 3273, 3258, 3247, 3225, 3201, + 3173, 3143, 3108, 3061, 3009, 2947, 2872, 2788, + 2704, 2627, 2545, 2457, 2380, 2310, 2243, 2191, + 2156, 2123, 2094, 2072, 2046, 2025, 2014, 2002, + 1984, 1972, 1967, 1955, 1950, 1958, 1961, 1965, + 1970, 1975, 1972, 1964, 1960, 1943, 1920, 1898, + 1872, 1844, 1816, 1799, 1781, 1767, 1757, 1748, + 1733, 1716, 1706, 1700, 1701, 1704, 1706, 1710, + 1710, 1702, 1692, 1675, 1648, 1616, 1578, 1536, + 1492, 1453, 1411, 1382, 1356, 1321, 1289, 1266, + 1241, 1208, 1179, 1152, 1115, 1085, 1062, 1038, + 1020, 1006, 997, 994, 988, 987, 986, 993, + 998, 1002, 1012, 1021, 1036, 1049, 1060, 1076, + 1091, 1109, 1128, 1149, 1166, 1179, 1193, 1215, + 1245, 1276, 1307, 1339, 1374, 1413, 1456, 1500, + 1540, 1574, 1602, 1635, 1670, 1709, 1747, 1783, + 1820, 1860, 1899, 1941, 1988, 2035, 2076, 2112, + 2146, 2181, 2215, 2252, 2287, 2320, 2360, 2401, + 2450, 2498, 2546, 2597, 2649, 2697, 2747, 2800, + 2851, 2901, 2953, 3010, 3057, 3100, 3144, 3182, + 3221, 3265, 3301, 3327, 3359, 3385, 3406, 3427, + 3442, 3454, 3457, 3447, 3431, 3412, 3385, 3351, + 3320, 3284, 3234, 3187, 3136, 3076, 3012, 2935, + 2845, 2749, 2654, 2562, 2465, 2374, 2289, 2216, + 2153, 2100, 2059, 2020, 1990, 1968, 1946, 1926, + 1911, 1899, 1891, 1889, 1887, 1887, 1894, 1902, + 1915, 1926, 1932, 1937, 1932, 1922, 1911, 1893, + 1876, 1861, 1845, 1827, 1808, 1794, 1784, 1779, + 1776, 1762, 1745, 1734, 1725, 1730, 1743, 1757, + 1771, 1783, 1787, 1790, 1792, 1781, 1756, 1720, + 1674, 1624, 1580, 1541, 1498, 1459, 1422, 1384, + 1352, 1326, 1281, 1230, 1189, 1144, 1086, 1040, + 1005, 966, 939, 923, 915, 908, 911, 917, + 919, 922, 931, 944, 948, 952, 961, 972, + 981, 1004, 1031, 1046, 1060, 1074, 1088, 1104, + 1126, 1151, 1174, 1203, 1239, 1279, 1322, 1376, + 1421, 1457, 1494, 1528, 1559, 1586, 1625, 1665, + 1702, 1747, 1794, 1851, 1909, 1968, 2021, 2064, + 2103, 2136, 2169, 2198, 2223, 2252, 2281, 2316, + 2356, 2398, 2446, 2496, 2543, 2593, 2645, 2697, + 2748, 2803, 2862, 2919, 2979, 3036, 3090, 3140, + 3185, 3221, 3251, 3278, 3300, 3323, 3348, 3375, + 3398, 3422, 3441, 3464, 3489, 3504, 3505, 3499, + 3489, 3467, 3440, 3414, 3375, 3335, 3309, 3270, + 3221, 3180, 3122, 3038, 2947, 2844, 2737, 2623, + 2503, 2388, 2277, 2176, 2098, 2039, 1989, 1943, + 1901, 1864, 1828, 1809, 1791, 1762, 1748, 1749, + 1745, 1753, 1780, 1804, 1828, 1854, 1876, 1889, + 1902, 1911, 1910, 1896, 1888, 1889, 1886, 1879, + 1876, 1875, 1866, 1859, 1857, 1841, 1817, 1795, + 1771, 1753, 1754, 1763, 1769, 1785, 1813, 1843, + 1868, 1885, 1883, 1853, 1819, 1786, 1750, 1709, + 1667, 1624, 1580, 1548, 1525, 1496, 1462, 1419, + 1361, 1298, 1228, 1154, 1083, 1016, 951, 889, + 843, 808, 789, 778, 772, 776, 785, 797, + 812, 830, 841, 858, 880, 893, 912, 938, + 960, 985, 1021, 1052, 1081, 1115, 1145, 1182, + 1227, 1268, 1313, 1356, 1390, 1424, 1460, 1487, + 1507, 1530, 1547, 1561, 1586, 1620, 1659, 1709, + 1764, 1823, 1885, 1945, 1994, 2039, 2079, 2113, + 2138, 2162, 2190, 2211, 2237, 2270, 2316, 2368, + 2419, 2473, 2530, 2584, 2638, 2705, 2766, 2821, + 2877, 2941, 2995, 3046, 3103, 3157, 3202, 3240, + 3280, 3322, 3364, 3401, 3433, 3476, 3516, 3548, + 3588, 3630, 3656, 3656, 3652, 3650, 3629, 3599, + 3563, 3524, 3479, 3434, 3398, 3367, 3334, 3294, + 3252, 3205, 3128, 3029, 2911, 2771, 2633, 2492, + 2352, 2209, 2076, 1972, 1887, 1824, 1787, 1752, + 1719, 1689, 1660, 1634, 1620, 1605, 1591, 1586, + 1588, 1592, 1610, 1642, 1675, 1703, 1733, 1762, + 1787, 1819, 1843, 1856, 1865, 1872, 1877, 1878, + 1867, 1854, 1840, 1821, 1804, 1786, 1765, 1743, + 1726, 1723, 1741, 1769, 1793, 1828, 1861, 1902, + 1944, 1976, 1994, 2000, 1988, 1959, 1929, 1908, + 1883, 1843, 1800, 1754, 1711, 1658, 1596, 1535, + 1455, 1354, 1259, 1171, 1075, 977, 877, 780, + 701, 638, 580, 545, 531, 516, 513, 548, + 590, 623, 669, 724, 767, 808, 859, 898, + 925, 951, 978, 1007, 1033, 1070, 1111, 1141, + 1169, 1209, 1251, 1287, 1318, 1342, 1356, 1376, + 1397, 1415, 1431, 1450, 1475, 1504, 1544, 1595, + 1645, 1687, 1739, 1799, 1853, 1903, 1953, 1994, + 2023, 2052, 2082, 2102, 2123, 2147, 2168, 2184, + 2213, 2256, 2294, 2331, 2382, 2434, 2480, 2536, + 2592, 2645, 2699, 2760, 2820, 2878, 2951, 3015, + 3072, 3132, 3193, 3263, 3327, 3380, 3423, 3474, + 3526, 3562, 3598, 3642, 3672, 3691, 3711, 3728, + 3735, 3723, 3700, 3678, 3657, 3608, 3548, 3499, + 3457, 3382, 3313, 3273, 3208, 3142, 3075, 2959, + 2817, 2667, 2519, 2370, 2221, 2069, 1919, 1806, + 1717, 1645, 1604, 1570, 1528, 1489, 1456, 1427, + 1402, 1369, 1344, 1348, 1363, 1373, 1404, 1457, + 1507, 1553, 1606, 1660, 1709, 1755, 1788, 1814, + 1831, 1842, 1851, 1841, 1823, 1812, 1799, 1787, + 1788, 1790, 1774, 1756, 1750, 1751, 1765, 1798, + 1819, 1836, 1865, 1907, 1947, 1986, 2017, 2027, + 2025, 2025, 2033, 2050, 2070, 2073, 2068, 2054, + 2022, 1971, 1907, 1814, 1695, 1575, 1452, 1322, + 1207, 1104, 999, 907, 833, 756, 684, 625, + 552, 482, 446, 421, 396, 394, 417, 445, + 486, 556, 636, 709, 784, 863, 927, 986, + 1044, 1096, 1138, 1182, 1228, 1277, 1328, 1379, + 1423, 1452, 1474, 1484, 1485, 1486, 1495, 1510, + 1525, 1544, 1574, 1609, 1638, 1671, 1709, 1738, + 1758, 1777, 1800, 1826, 1856, 1892, 1932, 1975, + 2014, 2050, 2083, 2116, 2140, 2148, 2151, 2157, + 2161, 2170, 2187, 2210, 2240, 2284, 2344, 2409, + 2477, 2550, 2624, 2702, 2778, 2854, 2938, 3026, + 3115, 3202, 3281, 3353, 3429, 3507, 3561, 3601, + 3650, 3683, 3706, 3747, 3797, 3830, 3873, 3924, + 3949, 3972, 3978, 3955, 3922, 3887, 3821, 3732, + 3655, 3579, 3479, 3401, 3352, 3285, 3209, 3141, + 3040, 2876, 2688, 2517, 2355, 2168, 1979, 1819, + 1679, 1564, 1495, 1459, 1424, 1386, 1344, 1301, + 1274, 1256, 1223, 1201, 1210, 1236, 1261, 1312, + 1384, 1449, 1511, 1577, 1641, 1695, 1750, 1801, + 1834, 1853, 1880, 1912, 1919, 1911, 1910, 1906, + 1897, 1903, 1903, 1884, 1856, 1834, 1824, 1842, + 1887, 1927, 1954, 1992, 2046, 2096, 2142, 2177, + 2194, 2185, 2167, 2166, 2186, 2213, 2246, 2277, + 2306, 2334, 2333, 2288, 2207, 2101, 1966, 1800, + 1634, 1475, 1312, 1164, 1042, 941, 857, 784, + 716, 654, 599, 541, 481, 435, 405, 384, + 379, 399, 446, 520, 616, 713, 806, 898, + 986, 1072, 1150, 1217, 1280, 1331, 1368, 1404, + 1442, 1478, 1507, 1520, 1518, 1506, 1489, 1474, + 1482, 1505, 1526, 1549, 1577, 1614, 1655, 1687, + 1707, 1719, 1719, 1711, 1715, 1727, 1744, 1767, + 1803, 1848, 1899, 1953, 1994, 2024, 2043, 2045, + 2035, 2020, 2002, 1986, 1975, 1971, 1987, 2018, + 2059, 2111, 2166, 2228, 2299, 2377, 2464, 2553, + 2637, 2724, 2814, 2914, 3028, 3140, 3240, 3332, + 3412, 3474, 3542, 3616, 3671, 3720, 3764, 3805, + 3855, 3908, 3953, 3986, 4025, 4042, 4044, 4048, + 4038, 3998, 3961, 3927, 3885, 3828, 3774, 3712, + 3639, 3573, 3491, 3406, 3320, 3221, 3102, 2943, + 2742, 2530, 2346, 2173, 1982, 1799, 1648, 1520, + 1422, 1366, 1330, 1297, 1248, 1199, 1170, 1160, + 1130, 1098, 1100, 1128, 1156, 1198, 1264, 1342, + 1427, 1518, 1601, 1680, 1763, 1838, 1889, 1930, + 1965, 1996, 2010, 2003, 1990, 1980, 1974, 1977, + 1988, 1997, 1998, 1992, 1984, 2002, 2047, 2085, + 2102, 2124, 2152, 2181, 2216, 2246, 2262, 2268, + 2263, 2275, 2302, 2335, 2376, 2413, 2447, 2483, + 2511, 2513, 2494, 2446, 2364, 2246, 2118, 1985, + 1833, 1679, 1530, 1383, 1250, 1135, 1038, 947, + 858, 776, 700, 640, 579, 518, 464, 420, + 396, 395, 421, 465, 520, 577, 648, 746, + 848, 938, 1029, 1115, 1188, 1256, 1322, 1372, + 1413, 1441, 1448, 1443, 1450, 1461, 1469, 1480, + 1500, 1528, 1562, 1606, 1649, 1675, 1692, 1699, + 1687, 1682, 1680, 1671, 1665, 1675, 1693, 1724, + 1764, 1809, 1853, 1888, 1915, 1933, 1945, 1947, + 1929, 1901, 1866, 1838, 1823, 1814, 1817, 1829, + 1846, 1875, 1915, 1969, 2030, 2093, 2161, 2232, + 2308, 2389, 2471, 2554, 2644, 2731, 2823, 2918, + 3032, 3147, 3228, 3317, 3411, 3490, 3582, 3674, + 3736, 3781, 3821, 3846, 3882, 3932, 3947, 3947, + 3976, 4000, 4013, 4047, 4080, 4083, 4083, 4079, + 4052, 4025, 3978, 3903, 3825, 3745, 3646, 3543, + 3457, 3355, 3229, 3081, 2872, 2637, 2440, 2233, + 2004, 1804, 1624, 1462, 1332, 1234, 1156, 1091, + 1036, 971, 913, 884, 848, 800, 797, 850, + 917, 990, 1081, 1192, 1306, 1426, 1536, 1625, + 1715, 1785, 1832, 1867, 1904, 1953, 1978, 1982, + 1993, 2014, 2031, 2047, 2067, 2072, 2064, 2041, + 2013, 2008, 2027, 2043, 2045, 2054, 2088, 2131, + 2168, 2198, 2230, 2248, 2259, 2287, 2329, 2375, + 2421, 2470, 2517, 2569, 2613, 2619, 2593, 2547, + 2484, 2404, 2326, 2256, 2172, 2065, 1941, 1812, + 1679, 1549, 1416, 1271, 1127, 994, 860, 747, + 663, 577, 491, 424, 376, 356, 342, 336, + 334, 347, 378, 429, 509, 594, 677, 766, + 867, 969, 1064, 1145, 1220, 1288, 1342, 1389, + 1428, 1461, 1481, 1503, 1528, 1554, 1589, 1622, + 1627, 1615, 1602, 1584, 1577, 1569, 1559, 1560, + 1566, 1571, 1585, 1614, 1640, 1660, 1670, 1685, + 1706, 1720, 1723, 1727, 1731, 1736, 1740, 1743, + 1747, 1745, 1731, 1709, 1690, 1678, 1671, 1667, + 1676, 1700, 1740, 1787, 1841, 1903, 1965, 2033, + 2109, 2189, 2267, 2352, 2441, 2527, 2626, 2743, + 2857, 2965, 3071, 3173, 3259, 3334, 3404, 3461, + 3530, 3603, 3653, 3704, 3752, 3795, 3834, 3883, + 3935, 3970, 4002, 4038, 4052, 4058, 4075, 4095, + 4094, 4084, 4076, 4046, 4017, 3989, 3933, 3855, + 3773, 3674, 3558, 3452, 3351, 3209, 3023, 2797, + 2555, 2342, 2122, 1878, 1665, 1482, 1308, 1166, + 1067, 979, 909, 855, 779, 731, 714, 658, + 615, 635, 679, 744, 832, 920, 1027, 1152, + 1272, 1387, 1507, 1618, 1709, 1767, 1810, 1867, + 1929, 1956, 1961, 1974, 1984, 1992, 2018, 2034, + 2038, 2044, 2024, 2000, 2018, 2051, 2063, 2059, + 2067, 2090, 2128, 2158, 2185, 2209, 2224, 2237, + 2277, 2334, 2395, 2452, 2504, 2562, 2627, 2677, + 2694, 2677, 2632, 2570, 2504, 2446, 2397, 2332, + 2259, 2182, 2109, 2034, 1951, 1852, 1732, 1593, + 1437, 1291, 1167, 1047, 926, 810, 706, 632, + 577, 522, 487, 465, 427, 397, 412, 435, + 454, 488, 532, 593, 675, 760, 828, 903, + 980, 1041, 1108, 1181, 1249, 1306, 1354, 1402, + 1465, 1533, 1578, 1605, 1614, 1611, 1609, 1603, + 1592, 1592, 1597, 1588, 1594, 1620, 1651, 1686, + 1702, 1700, 1696, 1700, 1695, 1694, 1695, 1690, + 1693, 1699, 1717, 1743, 1753, 1754, 1754, 1751, + 1742, 1731, 1719, 1702, 1688, 1687, 1693, 1706, + 1723, 1741, 1767, 1803, 1851, 1905, 1964, 2034, + 2106, 2183, 2272, 2373, 2471, 2564, 2660, 2756, + 2847, 2947, 3037, 3120, 3209, 3289, 3362, 3432, + 3508, 3576, 3621, 3668, 3712, 3749, 3784, 3803, + 3821, 3862, 3892, 3900, 3928, 3973, 3988, 4005, + 4037, 4047, 4036, 4022, 3988, 3946, 3912, 3858, + 3784, 3710, 3633, 3546, 3446, 3344, 3221, 3046, + 2803, 2566, 2353, 2113, 1878, 1678, 1481, 1308, + 1191, 1088, 989, 921, 837, 727, 653, 596, + 519, 479, 498, 538, 606, 699, 799, 919, + 1049, 1174, 1286, 1387, 1485, 1579, 1642, 1695, + 1788, 1878, 1921, 1960, 2014, 2042, 2065, 2100, + 2117, 2128, 2133, 2116, 2104, 2123, 2160, 2166, + 2160, 2179, 2208, 2224, 2237, 2255, 2260, 2261, + 2285, 2325, 2381, 2455, 2530, 2598, 2674, 2751, + 2806, 2823, 2811, 2779, 2726, 2681, 2652, 2618, + 2569, 2519, 2465, 2408, 2352, 2286, 2196, 2075, + 1944, 1798, 1652, 1527, 1395, 1256, 1133, 1024, + 935, 856, 784, 704, 619, 550, 509, 485, + 458, 435, 419, 429, 462, 503, 547, 591, + 633, 673, 727, 792, 851, 912, 984, 1059, + 1136, 1222, 1305, 1377, 1427, 1460, 1488, 1512, + 1532, 1549, 1570, 1601, 1635, 1683, 1734, 1790, + 1841, 1867, 1888, 1905, 1912, 1910, 1904, 1894, + 1890, 1904, 1926, 1936, 1943, 1950, 1957, 1959, + 1952, 1930, 1901, 1864, 1822, 1795, 1773, 1754, + 1730, 1700, 1677, 1663, 1646, 1629, 1627, 1634, + 1652, 1687, 1739, 1801, 1868, 1938, 2004, 2077, + 2152, 2223, 2290, 2356, 2436, 2523, 2615, 2721, + 2831, 2939, 3034, 3118, 3199, 3263, 3307, 3338, + 3360, 3385, 3412, 3443, 3484, 3532, 3590, 3636, + 3678, 3741, 3795, 3823, 3843, 3860, 3869, 3883, + 3905, 3922, 3931, 3949, 3961, 3967, 3971, 3950, + 3917, 3867, 3796, 3725, 3641, 3527, 3364, 3145, + 2925, 2727, 2501, 2257, 2038, 1833, 1624, 1458, + 1332, 1208, 1102, 997, 875, 772, 695, 608, + 539, 519, 519, 538, 589, 658, 758, 881, + 1002, 1121, 1249, 1370, 1484, 1576, 1646, 1729, + 1821, 1872, 1910, 1966, 2011, 2047, 2093, 2135, + 2168, 2194, 2196, 2185, 2192, 2210, 2209, 2187, + 2176, 2179, 2183, 2183, 2191, 2198, 2198, 2214, + 2249, 2296, 2358, 2432, 2503, 2580, 2662, 2731, + 2778, 2798, 2799, 2781, 2760, 2744, 2719, 2690, + 2660, 2627, 2593, 2566, 2531, 2471, 2388, 2293, + 2188, 2074, 1965, 1850, 1725, 1591, 1448, 1321, + 1214, 1114, 1024, 945, 875, 819, 781, 749, + 711, 677, 640, 606, 595, 587, 579, 581, + 595, 622, 669, 735, 803, 875, 950, 1028, + 1106, 1177, 1229, 1266, 1295, 1321, 1350, 1381, + 1407, 1440, 1481, 1528, 1587, 1654, 1716, 1771, + 1812, 1836, 1853, 1871, 1877, 1876, 1877, 1878, + 1887, 1903, 1917, 1932, 1943, 1947, 1954, 1959, + 1961, 1953, 1935, 1911, 1883, 1851, 1812, 1763, + 1708, 1651, 1605, 1568, 1536, 1512, 1488, 1474, + 1470, 1482, 1502, 1527, 1554, 1580, 1608, 1649, + 1698, 1750, 1808, 1878, 1960, 2048, 2149, 2257, + 2358, 2448, 2534, 2620, 2711, 2796, 2863, 2917, + 2964, 3004, 3034, 3064, 3108, 3140, 3164, 3205, + 3250, 3293, 3327, 3355, 3386, 3423, 3462, 3484, + 3508, 3534, 3552, 3569, 3604, 3639, 3672, 3707, + 3737, 3772, 3803, 3829, 3844, 3850, 3840, 3814, + 3772, 3714, 3647, 3559, 3425, 3233, 3027, 2851, + 2657, 2445, 2257, 2089, 1918, 1770, 1645, 1522, + 1414, 1300, 1158, 1036, 939, 826, 725, 680, + 664, 668, 707, 755, 830, 935, 1031, 1122, + 1213, 1296, 1373, 1440, 1486, 1558, 1641, 1689, + 1732, 1791, 1842, 1889, 1940, 1977, 2013, 2045, + 2051, 2040, 2045, 2053, 2046, 2029, 2016, 2016, + 2020, 2012, 2010, 2013, 2013, 2034, 2069, 2111, + 2173, 2244, 2312, 2387, 2472, 2545, 2598, 2627, + 2643, 2655, 2658, 2667, 2675, 2678, 2686, 2699, + 2704, 2707, 2705, 2682, 2629, 2562, 2483, 2394, + 2306, 2212, 2115, 2022, 1933, 1845, 1755, 1661, + 1569, 1481, 1391, 1305, 1234, 1166, 1093, 1024, + 968, 922, 897, 866, 837, 821, 809, 795, + 792, 812, 829, 848, 872, 913, 966, 1020, + 1062, 1098, 1135, 1167, 1191, 1217, 1244, 1277, + 1316, 1357, 1410, 1472, 1532, 1583, 1633, 1677, + 1716, 1747, 1761, 1770, 1783, 1802, 1821, 1844, + 1872, 1897, 1918, 1929, 1934, 1937, 1934, 1922, + 1908, 1891, 1875, 1863, 1849, 1833, 1815, 1797, + 1774, 1753, 1730, 1706, 1679, 1652, 1636, 1622, + 1616, 1617, 1624, 1633, 1648, 1671, 1695, 1721, + 1752, 1794, 1843, 1894, 1958, 2022, 2084, 2144, + 2203, 2264, 2320, 2372, 2412, 2457, 2501, 2538, + 2577, 2616, 2651, 2683, 2711, 2736, 2764, 2789, + 2798, 2808, 2817, 2824, 2838, 2858, 2873, 2897, + 2921, 2939, 2971, 3004, 3030, 3054, 3079, 3104, + 3131, 3168, 3202, 3242, 3282, 3308, 3342, 3376, + 3408, 3432, 3444, 3445, 3442, 3428, 3404, 3378, + 3344, 3295, 3219, 3110, 2992, 2886, 2763, 2622, + 2498, 2377, 2254, 2155, 2056, 1960, 1891, 1803, + 1704, 1622, 1549, 1471, 1411, 1370, 1342, 1334, + 1331, 1342, 1378, 1427, 1475, 1521, 1557, 1594, + 1638, 1671, 1699, 1738, 1774, 1794, 1821, 1855, + 1876, 1905, 1924, 1930, 1937, 1943, 1935, 1919, + 1905, 1898, 1885, 1871, 1865, 1867, 1867, 1863, + 1862, 1859, 1865, 1878, 1891, 1909, 1942, 1989, + 2040, 2100, 2166, 2229, 2279, 2325, 2362, 2394, + 2427, 2458, 2478, 2496, 2523, 2549, 2567, 2590, + 2601, 2602, 2588, 2564, 2529, 2490, 2444, 2390, + 2334, 2279, 2227, 2174, 2121, 2068, 2014, 1954, + 1887, 1820, 1760, 1701, 1638, 1580, 1524, 1479, + 1444, 1415, 1391, 1372, 1355, 1338, 1322, 1314, + 1304, 1293, 1293, 1302, 1311, 1328, 1351, 1377, + 1413, 1450, 1478, 1506, 1535, 1567, 1604, 1641, + 1678, 1714, 1746, 1777, 1808, 1834, 1856, 1867, + 1870, 1869, 1870, 1866, 1856, 1852, 1852, 1853, + 1858, 1861, 1865, 1868, 1872, 1880, 1883, 1885, + 1885, 1886, 1887, 1888, 1891, 1895, 1895, 1888, + 1885, 1881, 1872, 1860, 1841, 1834, 1823, 1813, + 1809, 1804, 1803, 1804, 1810, 1817, 1825, 1836, + 1847, 1857, 1870, 1888, 1904, 1919, 1937, 1960, + 1983, 2004, 2026, 2045, 2066, 2084, 2098, 2115, + 2132, 2150, 2169, 2185, 2206, 2227, 2243, 2257, + 2271, 2285, 2295, 2302, 2309, 2316, 2323, 2333, + 2347, 2361, 2379, 2395, 2410, 2421, 2436, 2449, + 2465, 2480, 2491, 2500, 2513, 2525, 2538, 2557, + 2577, 2595, 2613, 2632, 2651, 2674, 2691, 2710, + 2727, 2745, 2758, 2769, 2785, 2800, 2810, 2816, + 2826, 2832, 2828, 2823, 2817, 2805, 2797, 2779, + 2750, 2716, 2684, 2650, 2609, 2569, 2528, 2485, + 2447, 2408, 2377, 2351, 2323, 2301, 2281, 2267, + 2257, 2247, 2241, 2243, 2247, 2247, 2253, 2259, + 2270, 2289, 2301, 2308, 2320, 2331, 2341, 2346, + 2348, 2350, 2347, 2338, 2330, 2321, 2311, 2302, + 2290, 2271, 2256, 2239, 2211, 2183, 2161, 2140, + 2115, 2087, 2064, 2047, 2029, 2015, 2001, 1988, + 1980, 1971, 1959, 1954, 1955, 1956, 1962, 1970, + 1978, 1987, 1995, 1998, 2001, 2003, 2000, 1997, + 1989, 1984, 1980, 1973, 1967, 1963, 1958, 1947, + 1939, 1929, 1917, 1905, 1893, 1880, 1869, 1860, + 1850, 1841, 1833, 1827, 1820, 1820, 1821, 1822, + 1824, 1824, 1822, 1824, 1830, 1831, 1837, 1849, + 1857, 1864, 1874, 1880, 1884, 1894, 1902, 1901, + 1900, 1900, 1903, 1909, 1910, 1909, 1901, 1895, + 1891, 1884, 1875, 1867, 1854, 1839, 1829, 1821, + 1811, 1803, 1791, 1779, 1774, 1764, 1751, 1735, + 1724, 1714, 1703, 1693, 1684, 1676, 1669, 1663, + 1659, 1656, 1655, 1653, 1650, 1650, 1651, 1652, + 1652, 1652, 1654, 1656, 1661, 1670, 1677, 1681, + 1690, 1700, 1711, 1719, 1729, 1742, 1750, 1761, + 1771, 1782, 1793, 1803, 1815, 1826, 1836, 1849, + 1861, 1874, 1884, 1894, 1910, 1921, 1934, 1947, + 1960, 1969, 1980, 1995, 2005, 2014, 2022, 2029, + 2035, 2040, 2048, 2054, 2059, 2066, 2074, 2082, + 2088, 2091, 2096, 2102, 2100, 2101, 2104, 2107, + 2113, 2121, 2131, 2136, 2140, 2145, 2148, 2151, + 2156, 2162, 2165, 2170, 2175, 2179, 2184, 2191, + 2198, 2206, 2219, 2229, 2240, 2252, 2268, 2282, + 2295, 2310, 2328, 2346, 2364, 2383, 2402, 2420, + 2439, 2456, 2472, 2489, 2503, 2516, 2530, 2545, + 2561, 2575, 2587, 2595, 2602, 2610, 2615, 2620, + 2620, 2619, 2615, 2612, 2609, 2600, 2594, 2583, + 2571, 2559, 2545, 2531, 2513, 2496, 2477, 2465, + 2451, 2438, 2426, 2409, 2395, 2385, 2369, 2354, + 2344, 2332, 2321, 2310, 2299, 2293, 2289, 2284, + 2277, 2265, 2256, 2249, 2234, 2223, 2215, 2201, + 2189, 2180, 2169, 2158, 2148, 2136, 2120, 2105, + 2091, 2073, 2053, 2034, 2016, 1998, 1982, 1968, + 1959, 1946, 1936, 1929, 1919, 1914, 1909, 1902, + 1899, 1894, 1892, 1890, 1891, 1894, 1895, 1897, + 1895, 1895, 1892, 1892, 1888, 1882, 1877, 1872, + 1869, 1862, 1859, 1858, 1854, 1849, 1843, 1837, + 1828, 1821, 1813, 1801, 1788, 1781, 1772, 1763, + 1752, 1745, 1735, 1724, 1713, 1704, 1693, 1685, + 1677, 1671, 1667, 1667, 1668, 1668, 1670, 1674, + 1678, 1680, 1681, 1683, 1686, 1688, 1689, 1694, + 1696, 1694, 1694, 1700, 1704, 1707, 1711, 1717, + 1721, 1730, 1736, 1741, 1746, 1753, 1760, 1765, + 1775, 1782, 1786, 1793, 1798, 1803, 1811, 1815, + 1822, 1830, 1836, 1844, 1852, 1857, 1864, 1870, + 1873, 1878, 1883, 1885, 1888, 1893, 1894, 1900, + 1905, 1908, 1912, 1916, 1921, 1925, 1927, 1931, + 1936, 1935, 1940, 1945, 1945, 1946, 1952, 1955, + 1958, 1963, 1965, 1967, 1970, 1969, 1969, 1974, + 1974, 1973, 1974, 1975, 1977, 1979, 1983, 1984, + 1989, 1996, 2002, 2002, 2007, 2016, 2021, 2022, + 2029, 2038, 2039, 2041, 2049, 2051, 2054, 2058, + 2063, 2065, 2072, 2079, 2084, 2091, 2100, 2109, + 2114, 2122, 2128, 2135, 2142, 2153, 2162, 2167, + 2179, 2191, 2195, 2204, 2215, 2222, 2233, 2244, + 2253, 2259, 2267, 2275, 2281, 2289, 2297, 2302, + 2301, 2308, 2316, 2316, 2321, 2324, 2324, 2329, + 2334, 2335, 2337, 2339, 2339, 2341, 2342, 2344, + 2344, 2345, 2346, 2349, 2348, 2349, 2350, 2351, + 2350, 2351, 2352, 2350, 2350, 2351, 2347, 2346, + 2346, 2346, 2340, 2339, 2340, 2341, 2337, 2335, + 2335, 2329, 2327, 2324, 2322, 2318, 2318, 2315, + 2311, 2309, 2305, 2303, 2300, 2303, 2301, 2295, + 2292, 2290, 2286, 2282, 2277, 2272, 2267, 2256, + 2248, 2242, 2231, 2220, 2207, 2196, 2185, 2176, + 2166, 2153, 2144, 2132, 2121, 2111, 2100, 2087, + 2074, 2060, 2051, 2042, 2030, 2025, 2015, 2005, + 1998, 1993, 1985, 1978, 1969, 1960, 1954, 1947, + 1940, 1932, 1928, 1921, 1915, 1912, 1904, 1899, + 1892, 1889, 1887, 1879, 1873, 1866, 1860, 1852, + 1848, 1842, 1837, 1835, 1833, 1832, 1828, 1827, + 1826, 1825, 1825, 1824, 1823, 1827, 1829, 1830, + 1833, 1835, 1839, 1841, 1843, 1842, 1846, 1848, + 1851, 1853, 1857, 1863, 1866, 1870, 1871, 1875, + 1877, 1879, 1880, 1881, 1882, 1882, 1883, 1882, + 1884, 1885, 1886, 1886, 1889, 1890, 1890, 1893, + 1893, 1891, 1891, 1893, 1892, 1894, 1896, 1897, + 1900, 1904, 1908, 1913, 1913, 1914, 1919, 1919, + 1923, 1929, 1932, 1937, 1940, 1945, 1949, 1953, + 1955, 1958, 1962, 1967, 1973, 1976, 1977, 1982, + 1986, 1989, 1993, 1999, 2001, 2007, 2009, 2012, + 2018, 2022, 2025, 2033, 2040, 2045, 2051, 2059, + 2064, 2073, 2081, 2082, 2092, 2098, 2105, 2111, + 2116, 2121, 2128, 2133, 2136, 2139, 2142, 2146, + 2152, 2156, 2158, 2161, 2167, 2165, 2169, 2173, + 2174, 2179, 2175, 2176, 2179, 2181, 2184, 2185, + 2186, 2188, 2191, 2189, 2190, 2190, 2191, 2193, + 2197, 2197, 2196, 2199, 2199, 2199, 2201, 2203, + 2205, 2208, 2210, 2212, 2214, 2216, 2219, 2222, + 2222, 2227, 2229, 2229, 2233, 2234, 2236, 2238, + 2240, 2242, 2244, 2248, 2249, 2251, 2250, 2250, + 2251, 2248, 2248, 2247, 2248, 2250, 2250, 2248, + 2247, 2247, 2247, 2247, 2248, 2250, 2252, 2253, + 2253, 2254, 2256, 2258, 2257, 2257, 2256, 2259, + 2258, 2257, 2257, 2256, 2253, 2256, 2258, 2254, + 2251, 2247, 2245, 2243, 2240, 2236, 2231, 2227, + 2224, 2221, 2217, 2215, 2214, 2210, 2206, 2202, + 2200, 2199, 2193, 2190, 2186, 2182, 2180, 2175, + 2171, 2168, 2162, 2157, 2152, 2148, 2144, 2139, + 2131, 2125, 2118, 2113, 2109, 2104, 2099, 2095, + 2090, 2087, 2082, 2076, 2070, 2068, 2065, 2056, + 2052, 2051, 2048, 2048, 2043, 2041, 2037, 2034, + 2030, 2026, 2023, 2021, 2020, 2017, 2014, 2011, + 2009, 2005, 2004, 2003, 2002, 2001, 2000, 1995, + 1993, 1992, 1987, 1984, 1984, 1979, 1976, 1972, + 1967, 1966, 1962, 1960, 1957, 1956, 1956, 1955, + 1953, 1951, 1949, 1946, 1944, 1942, 1938, 1936, + 1937, 1934, 1932, 1932, 1930, 1928, 1929, 1926, + 1925, 1925, 1923, 1923, 1922, 1919, 1922, 1920, + 1920, 1921, 1919, 1924, 1926, 1928, 1929, 1929, + 1934, 1936, 1936, 1937, 1937, 1939, 1939, 1943, + 1944, 1947, 1948, 1950, 1952, 1955, 1959, 1959, + 1963, 1964, 1967, 1970, 1972, 1975, 1978, 1981, + 1985, 1985, 1991, 1994, 1997, 2002, 2007, 2013, + 2016, 2022, 2025, 2028, 2031, 2032, 2033, 2035, + 2040, 2043, 2046, 2049, 2053, 2052, 2052, 2051, + 2050, 2052, 2054, 2053, 2053, 2058, 2062, 2063, + 2064, 2066, 2068, 2066, 2069, 2070, 2071, 2073, + 2074, 2074, 2076, 2076, 2076, 2078, 2077, 2079, + 2078, 2079, 2079, 2078, 2078, 2077, 2074, 2074, + 2073, 2074, 2070, 2068, 2070, 2069, 2067, 2067, + 2064, 2064, 2066, 2065, 2065, 2064, 2063, 2066, + 2066, 2066, 2064, 2065, 2067, 2065, 2067, 2068, + 2067, 2067, 2068, 2068, 2068, 2068, 2069, 2069, + 2071, 2071, 2072, 2075, 2076, 2076, 2076, 2076, + 2076, 2077, 2078, 2080, 2082, 2084, 2087, 2089, + 2090, 2091, 2091, 2093, 2091, 2093, 2097, 2097, + 2098, 2100, 2102, 2102, 2105, 2104, 2103, 2103, + 2105, 2105, 2111, 2112, 2109, 2111, 2111, 2110, + 2108, 2108, 2109, 2110, 2112, 2110, 2106, 2106, + 2106, 2106, 2101, 2102, 2103, 2101, 2098, 2098, + 2098, 2096, 2092, 2092, 2088, 2089, 2085, 2082, + 2081, 2077, 2074, 2069, 2068, 2062, 2058, 2057, + 2054, 2051, 2048, 2046, 2042, 2041, 2037, 2037, + 2031, 2026, 2026, 2021, 2018, 2015, 2011, 2006, + 2000, 1999, 1994, 1991, 1986, 1983, 1984, 1982, + 1980, 1978, 1978, 1977, 1976, 1975, 1973, 1974, + 1974, 1974, 1974, 1974, 1977, 1978, 1977, 1976, + 1976, 1977, 1976, 1978, 1981, 1982, 1980, 1983, + 1984, 1985, 1986, 1985, 1982, 1983, 1983, 1984, + 1984, 1987, 1984, 1983, 1984, 1980, 1979, 1984, + 1981, 1980, 1983, 1985, 1984, 1984, 1982, 1982, + 1987, 1987, 1986, 1992, 1989, 1989, 1998, 2001, + 2000, 2002, 2003, 2003, 2004, 2005, 2007, 2009, + 2010, 2010, 2013, 2013, 2014, 2014, 2016, 2021, + 2018, 2019, 2022, 2026, 2029, 2028, 2029, 2029, + 2033, 2034, 2032, 2035, 2035, 2035, 2038, 2039, + 2041, 2044, 2047, 2046, 2047, 2052, 2054, 2058, + 2059, 2058, 2060, 2063, 2065, 2068, 2067, 2069, + 2068, 2067, 2071, 2073, 2073, 2073, 2075, 2073, + 2071, 2069, 2072, 2072, 2072, 2073, 2072, 2067, + 2063, 2068, 2069, 2068, 2067, 2066, 2066, 2064, + 2065, 2064, 2063, 2061, 2061, 2059, 2061, 2061, + 2059, 2058, 2059, 2056, 2051, 2052, 2051, 2047, + 2045, 2042, 2039, 2041, 2041, 2036, 2035, 2032, + 2031, 2032, 2031, 2028, 2028, 2026, 2026, 2023, + 2022, 2021, 2022, 2022, 2020, 2019, 2016, 2018, + 2017, 2016, 2015, 2013, 2016, 2019, 2019, 2021, + 2023, 2024, 2025, 2027, 2029, 2030, 2033, 2032, + 2035, 2041, 2042, 2043, 2046, 2050, 2051, 2053, + 2057, 2056, 2058, 2055, 2056, 2056, 2054, 2051, + 2051, 2051, 2046, 2045, 2047, 2046, 2046, 2047, + 2046, 2043, 2044, 2041, 2041, 2040, 2040, 2041, + 2040, 2041, 2038, 2036, 2035, 2036, 2037, 2037, + 2034, 2035, 2033, 2030, 2030, 2029, 2029, 2028, + 2027, 2028, 2028, 2026, 2025, 2025, 2028, 2028, + 2030, 2031, 2031, 2033, 2038, 2039, 2040, 2042, + 2044, 2048, 2050, 2050, 2055, 2059, 2064, 2065, + 2068, 2071, 2074, 2076, 2076, 2080, 2086, 2085, + 2086, 2091, 2090, 2092, 2096, 2096, 2097, 2100, + 2103, 2105, 2103, 2104, 2104, 2106, 2107, 2106, + 2107, 2108, 2107, 2108, 2109, 2107, 2107, 2109, + 2107, 2108, 2105, 2103, 2102, 2101, 2101, 2101, + 2101, 2100, 2102, 2099, 2100, 2103, 2100, 2098, + 2095, 2096, 2091, 2088, 2087, 2087, 2086, 2084, + 2084, 2081, 2082, 2081, 2077, 2075, 2073, 2071, + 2069, 2067, 2067, 2067, 2066, 2065, 2068, 2068, + 2066, 2066, 2064, 2063, 2063, 2060, 2058, 2058, + 2057, 2057, 2057, 2055, 2051, 2048, 2049, 2047, + 2046, 2045, 2042, 2042, 2042, 2040, 2040, 2039, + 2038, 2034, 2032, 2032, 2032, 2031, 2029, 2029, + 2028, 2028, 2028, 2026, 2024, 2025, 2026, 2023, + 2024, 2024, 2023, 2023, 2020, 2021, 2020, 2021, + 2023, 2024, 2024, 2026, 2026, 2026, 2026, 2030, + 2028, 2030, 2032, 2034, 2032, 2032, 2032, 2034, + 2038, 2039, 2039, 2037, 2036, 2041, 2043, 2043, + 2044, 2046, 2050, 2052, 2046, 2045, 2048, 2051, + 2049, 2049, 2047, 2047, 2046, 2042, 2041, 2043, + 2040, 2040, 2045, 2045, 2043, 2043, 2038, 2040, + 2037, 2030, 2027, 2031, 2038, 2034, 2038, 2039, + 2033, 2032, 2032, 2028, 2029, 2035, 2037, 2038, + 2038, 2038, 2044, 2047, 2042, 2039, 2043, 2042, + 2044, 2048, 2048, 2051, 2051, 2056, 2058, 2058, + 2055, 2055, 2055, 2060, 2066, 2067, 2070, 2072, + 2074, 2069, 2069, 2070, 2070, 2074, 2076, 2074, + 2074, 2077, 2079, 2080, 2080, 2081, 2078, 2082, + 2084, 2084, 2086, 2086, 2087, 2081, 2087, 2090, + 2088, 2089, 2090, 2087, 2087, 2087, 2086, 2090, + 2094, 2090, 2088, 2093, 2093, 2091, 2090, 2089, + 2087, 2088, 2089, 2092, 2095, 2092, 2086, 2085, + 2085, 2085, 2088, 2087, 2084, 2078, 2075, 2078, + 2079, 2073, 2065, 2063, 2066, 2066, 2065, 2067, + 2063, 2056, 2060, 2062, 2060, 2059, 2062, 2057, + 2056, 2055, 2056, 2059, 2058, 2059, 2052, 2052, + 2054, 2054, 2057, 2055, 2053, 2055, 2056, 2054, + 2048, 2044, 2043, 2041, 2037, 2033, 2031, 2033, + 2035, 2035, 2030, 2025, 2024, 2025, 2028, 2024, + 2021, 2023, 2020, 2016, 2020, 2020, 2012, 2009, + 2015, 2019, 2021, 2019, 2015, 2018, 2017, 2012, + 2011, 2017, 2015, 2012, 2011, 2010, 2011, 2017, + 2018, 2014, 2013, 2015, 2011, 2006, 2006, 2005, + 2005, 2006, 2001, 2002, 2009, 2009, 2010, 2013, + 2017, 2021, 2019, 2020, 2024, 2025, 2028, 2029, + 2028, 2032, 2034, 2037, 2040, 2038, 2036, 2036, + 2040, 2039, 2034, 2034, 2033, 2027, 2030, 2033, + 2030, 2030, 2032, 2030, 2028, 2029, 2027, 2023, + 2022, 2022, 2017, 2018, 2021, 2020, 2017, 2014, + 2017, 2017, 2015, 2020, 2021, 2018, 2019, 2020, + 2021, 2019, 2017, 2017, 2018, 2021, 2021, 2021, + 2024, 2029, 2031, 2035, 2035, 2035, 2036, 2035, + 2038, 2043, 2047, 2048, 2046, 2043, 2045, 2047, + 2046, 2047, 2047, 2048, 2051, 2052, 2052, 2052, + 2052, 2051, 2052, 2050, 2045, 2047, 2050, 2048, + 2049, 2048, 2046, 2050, 2051, 2051, 2052, 2052, + 2055, 2056, 2056, 2055, 2060, 2061, 2057, 2061, + 2064, 2064, 2061, 2061, 2060, 2064, 2064, 2065, + 2068, 2067, 2066, 2066, 2067, 2069, 2070, 2068, + 2069, 2069, 2069, 2073, 2074, 2074, 2075, 2078, + 2082, 2081, 2079, 2084, 2088, 2086, 2085, 2088, + 2091, 2092, 2096, 2100, 2107, 2109, 2110, 2110, + 2113, 2112, 2110, 2114, 2116, 2116, 2116, 2115, + 2114, 2112, 2109, 2110, 2111, 2112, 2112, 2109, + 2108, 2108, 2111, 2113, 2113, 2111, 2109, 2107, + 2107, 2106, 2106, 2106, 2106, 2104, 2100, 2105, + 2105, 2101, 2104, 2104, 2104, 2103, 2098, 2096, + 2100, 2102, 2098, 2098, 2097, 2094, 2094, 2091, + 2089, 2090, 2091, 2091, 2087, 2086, 2086, 2086, + 2087, 2088, 2085, 2082, 2079, 2078, 2079, 2077, + 2079, 2077, 2078, 2078, 2077, 2078, 2083, 2083, + 2082, 2082, 2085, 2086, 2092, 2095, 2092, 2092, + 2096, 2096, 2100, 2102, 2103, 2106, 2108, 2106, + 2104, 2106, 2108, 2109, 2108, 2108, 2106, 2106, + 2103, 2103, 2105, 2103, 2102, 2099, 2098, 2101, + 2101, 2103, 2104, 2107, 2106, 2105, 2106, 2108, + 2108, 2107, 2107, 2106, 2109, 2111, 2108, 2107, + 2107, 2108, 2104, 2105, 2104, 2102, 2101, 2103, + 2107, 2103, 2101, 2099, 2096, 2097, 2098, 2098, + 2098, 2098, 2098, 2100, 2099, 2098, 2099, 2098, + 2098, 2100, 2102, 2099, 2098, 2096, 2095, 2097, + 2094, 2095, 2092, 2086, 2081, 2079, 2070, 2063, + 2053, 2046, 1902, 1613, 1570, 1719, 1812, 1882, + 1946, 1964, 1959, 1931, 1918, 1942, 1980, 2003, + 2025, 2040, 2049, 2063, 2059, 2053, 2062, 2086, + 2102, 2119, 2114, 2081, 2034, 2009, 2013, 2033, + 2068, 2109, 2134, 2126, 2096, 2053, 2007, 1980, + 1980, 2016, 2063, 2086, 2092, 2088, 2082, 2065, + 2051, 2037, 2030, 2040, 2056, 2065, 2048, 2026, + 2014, 2015, 2032, 2054, 2075, 2080, 2069, 2054, + 2031, 2011, 1994, 1982, 1987, 2005, 2030, 2055, + 2064, 2037, 1997, 1967, 1965, 1984, 2004, 2011, + 2007, 2002, 1993, 1985, 1985, 1984, 1985, 1988, + 1994, 1991, 1979, 1960, 1946, 1938, 1931, 1937, + 1952, 1972, 1984, 1979, 1953, 1927, 1909, 1894, + 1897, 1914, 1932, 1939, 1932, 1920, 1914, 1907, + 1913, 1933, 1944, 1937, 1933, 1935, 1925, 1916, + 1909, 1909, 1918, 1936, 1954, 1958, 1953, 1941, + 1927, 1914, 1908, 1925, 1941, 1949, 1955, 1954, + 1950, 1946, 1940, 1929, 1926, 1929, 1937, 1945, + 1950, 1942, 1932, 1925, 1928, 1940, 1947, 1950, + 1951, 1947, 1937, 1924, 1922, 1928, 1931, 1939, + 1947, 1950, 1948, 1941, 1938, 1932, 1927, 1924, + 1926, 1929, 1929, 1931, 1928, 1915, 1909, 1906, + 1909, 1914, 1919, 1921, 1919, 1912, 1903, 1897, + 1899, 1901, 1906, 1909, 1901, 1896, 1897, 1896, + 1893, 1887, 1880, 1884, 1884, 1878, 1878, 1881, + 1875, 1866, 1863, 1854, 1852, 1860, 1865, 1861, + 1853, 1859, 1865, 1865, 1858, 1859, 1858, 1853, + 1852, 1849, 1848, 1846, 1845, 1841, 1830, 1820, + 1827, 1834, 1827, 1828, 1826, 1806, 1804, 1805, + 1806, 1818, 1818, 1813, 1814, 1808, 1804, 1806, + 1813, 1816, 1820, 1821, 1816, 1815, 1813, 1814, + 1818, 1823, 1831, 1841, 1844, 1831, 1825, 1825, + 1821, 1826, 1827, 1827, 1831, 1836, 1841, 1840, + 1830, 1834, 1843, 1845, 1851, 1855, 1849, 1842, + 1839, 1838, 1837, 1841, 1841, 1842, 1842, 1836, + 1830, 1826, 1830, 1842, 1846, 1855, 1864, 1860, + 1859, 1857, 1850, 1853, 1859, 1858, 1862, 1867, + 1868, 1862, 1850, 1842, 1842, 1839, 1847, 1864, + 1870, 1869, 1870, 1862, 1850, 1842, 1846, 1856, + 1859, 1866, 1870, 1866, 1857, 1847, 1844, 1848, + 1858, 1863, 1863, 1861, 1856, 1853, 1858, 1867, + 1873, 1883, 1889, 1892, 1891, 1885, 1884, 1886, + 1891, 1904, 1919, 1925, 1924, 1919, 1911, 1904, + 1894, 1894, 1904, 1915, 1927, 1936, 1937, 1936, + 1926, 1918, 1920, 1926, 1931, 1938, 1937, 1935, + 1936, 1946, 1958, 1962, 1965, 1963, 1953, 1950, + 1947, 1935, 1923, 1914, 1911, 1914, 1925, 1931, + 1933, 1934, 1927, 1923, 1921, 1926, 1926, 1924, + 1929, 1938, 1952, 1956, 1956, 1959, 1957, 1960, + 1964, 1958, 1946, 1947, 1953, 1960, 1969, 1977, + 1983, 1981, 1975, 1965, 1955, 1948, 1937, 1921, + 1916, 1922, 1931, 1945, 1954, 1960, 1957, 1944, + 1927, 1922, 1923, 1925, 1929, 1932, 1943, 1952, + 1960, 1958, 1953, 1953, 1939, 1914, 1901, 1887, + 1880, 1878, 1878, 1883, 1881, 1882, 1888, 1896, + 1895, 1879, 1864, 1846, 1829, 1831, 1842, 1846, + 1851, 1867, 1873, 1866, 1852, 1838, 1834, 1833, + 1831, 1828, 1823, 1820, 1829, 1836, 1838, 1838, + 1837, 1827, 1814, 1801, 1801, 1802, 1797, 1797, + 1814, 1830, 1837, 1844, 1847, 1840, 1830, 1818, + 1803, 1797, 1801, 1811, 1823, 1838, 1837, 1823, + 1810, 1798, 1783, 1765, 1744, 1723, 1708, 1701, + 1701, 1715, 1728, 1737, 1731, 1725, 1723, 1719, + 1700, 1679, 1672, 1671, 1668, 1672, 1678, 1683, + 1692, 1698, 1695, 1684, 1671, 1662, 1660, 1653, + 1641, 1639, 1644, 1657, 1672, 1668, 1647, 1632, + 1626, 1617, 1598, 1584, 1588, 1597, 1603, 1613, + 1622, 1621, 1614, 1606, 1600, 1592, 1575, 1551, + 1537, 1531, 1525, 1531, 1557, 1573, 1574, 1571, + 1571, 1568, 1558, 1561, 1554, 1538, 1531, 1539, + 1553, 1560, 1558, 1547, 1531, 1511, 1498, 1493, + 1491, 1500, 1509, 1508, 1505, 1502, 1505, 1519, + 1531, 1527, 1524, 1529, 1524, 1513, 1517, 1521, + 1527, 1547, 1569, 1592, 1598, 1587, 1569, 1553, + 1538, 1528, 1531, 1538, 1540, 1540, 1544, 1552, + 1552, 1552, 1551, 1557, 1560, 1557, 1557, 1550, + 1535, 1513, 1493, 1501, 1524, 1536, 1543, 1542, + 1534, 1531, 1533, 1544, 1568, 1596, 1616, 1636, + 1653, 1658, 1654, 1647, 1641, 1634, 1637, 1632, + 1630, 1634, 1634, 1637, 1639, 1639, 1650, 1674, + 1689, 1687, 1672, 1663, 1647, 1635, 1646, 1661, + 1680, 1707, 1728, 1731, 1732, 1727, 1710, 1702, + 1711, 1730, 1758, 1770, 1772, 1779, 1778, 1776, + 1793, 1811, 1815, 1822, 1828, 1821, 1811, 1809, + 1812, 1828, 1852, 1871, 1891, 1899, 1881, 1856, + 1837, 1828, 1834, 1853, 1882, 1912, 1930, 1936, + 1931, 1924, 1934, 1962, 1991, 2007, 2007, 2003, + 2001, 1999, 2015, 2038, 2066, 2093, 2112, 2120, + 2119, 2112, 2104, 2106, 2123, 2136, 2155, 2178, + 2195, 2188, 2162, 2145, 2144, 2148, 2160, 2180, + 2194, 2201, 2196, 2189, 2186, 2197, 2213, 2233, + 2243, 2238, 2230, 2217, 2201, 2203, 2216, 2232, + 2251, 2267, 2278, 2283, 2276, 2258, 2252, 2264, + 2279, 2294, 2304, 2302, 2293, 2283, 2277, 2285, + 2302, 2315, 2320, 2313, 2309, 2311, 2316, 2322, + 2334, 2349, 2359, 2368, 2381, 2390, 2384, 2377, + 2381, 2404, 2430, 2449, 2464, 2479, 2481, 2471, + 2475, 2491, 2510, 2524, 2528, 2524, 2520, 2516, + 2523, 2539, 2550, 2559, 2572, 2582, 2583, 2579, + 2573, 2570, 2572, 2574, 2581, 2589, 2600, 2610, + 2602, 2594, 2596, 2610, 2629, 2641, 2642, 2638, + 2643, 2648, 2652, 2660, 2672, 2683, 2682, 2682, + 2692, 2700, 2699, 2703, 2715, 2721, 2724, 2734, + 2740, 2740, 2732, 2726, 2729, 2733, 2731, 2725, + 2721, 2722, 2718, 2708, 2703, 2707, 2714, 2720, + 2722, 2722, 2719, 2708, 2701, 2698, 2693, 2686, + 2679, 2678, 2676, 2676, 2672, 2671, 2663, 2648, + 2632, 2620, 2614, 2615, 2617, 2616, 2611, 2609, + 2603, 2592, 2586, 2587, 2590, 2594, 2590, 2584, + 2574, 2561, 2548, 2534, 2522, 2511, 2503, 2503, + 2501, 2496, 2488, 2488, 2486, 2484, 2492, 2504, + 2499, 2484, 2478, 2474, 2467, 2461, 2458, 2456, + 2449, 2438, 2429, 2426, 2422, 2413, 2404, 2394, + 2387, 2390, 2392, 2392, 2389, 2382, 2375, 2372, + 2367, 2355, 2347, 2346, 2344, 2340, 2333, 2325, + 2317, 2313, 2307, 2303, 2307, 2305, 2297, 2292, + 2288, 2282, 2280, 2282, 2289, 2295, 2298, 2289, + 2276, 2262, 2254, 2253, 2254, 2252, 2249, 2246, + 2234, 2221, 2213, 2214, 2208, 2198, 2192, 2194, + 2190, 2179, 2169, 2167, 2166, 2167, 2167, 2163, + 2155, 2144, 2133, 2130, 2130, 2127, 2123, 2124, + 2124, 2120, 2120, 2116, 2112, 2114, 2116, 2103, + 2083, 2074, 2068, 2068, 2069, 2079, 2093, 2098, + 2089, 2085, 2088, 2090, 2084, 2075, 2074, 2075, + 2079, 2081, 2079, 2075, 2076, 2086, 2096, 2099, + 2104, 2107, 2109, 2112, 2112, 2111, 2113, 2119, + 2123, 2128, 2131, 2130, 2123, 2117, 2118, 2120, + 2125, 2128, 2134, 2135, 2139, 2137, 2131, 2126, + 2123, 2127, 2127, 2126, 2121, 2119, 2114, 2115, + 2118, 2121, 2123, 2123, 2123, 2119, 2113, 2110, + 2107, 2102, 2102, 2105, 2109, 2109, 2099, 2085, + 2077, 2076, 2081, 2087, 2097, 2101, 2102, 2103, + 2104, 2103, 2104, 2108, 2111, 2112, 2111, 2109, + 2106, 2100, 2097, 2095, 2089, 2094, 2094, 2085, + 2074, 2067, 2058, 2053, 2056, 2058, 2056, 2052, + 2044, 2038, 2030, 2023, 2024, 2027, 2028, 2026, + 2019, 2015, 2020, 2022, 2020, 2013, 2013, 2010, + 2005, 2005, 2007, 2009, 2017, 2019, 2020, 2020, + 2021, 2021, 2019, 2015, 2019, 2023, 2031, 2039, + 2044, 2046, 2042, 2041, 2039, 2042, 2039, 2034, + 2030, 2025, 2019, 2020, 2022, 2026, 2028, 2026, + 2017, 2007, 1996, 1983, 1981, 1984, 1984, 1976, + 1973, 1974, 1966, 1953, 1947, 1948, 1947, 1943, + 1933, 1922, 1911, 1905, 1911, 1918, 1924, 1934, + 1942, 1938, 1933, 1927, 1928, 1932, 1937, 1950, + 1960, 1963, 1961, 1960, 1964, 1962, 1959, 1963, + 1964, 1956, 1946, 1936, 1935, 1931, 1925, 1926, + 1935, 1935, 1927, 1914, 1905, 1899, 1901, 1907, + 1910, 1912, 1910, 1908, 1908, 1909, 1914, 1918, + 1917, 1912, 1909, 1911, 1909, 1905, 1909, 1921, + 1931, 1936, 1938, 1940, 1942, 1937, 1934, 1926, + 1929, 1948, 1961, 1960, 1960, 1963, 1963, 1957, + 1954, 1955, 1955, 1953, 1950, 1948, 1953, 1959, + 1956, 1945, 1945, 1952, 1951, 1941, 1929, 1923, + 1926, 1931, 1933, 1940, 1959, 1969, 1961, 1949, + 1948, 1956, 1955, 1955, 1952, 1952, 1957, 1961, + 1968, 1977, 1986, 1991, 1985, 1987, 1991, 1988, + 1989, 1996, 2004, 2010, 2019, 2036, 2048, 2048, + 2044, 2041, 2040, 2048, 2062, 2075, 2078, 2074, + 2080, 2092, 2105, 2118, 2129, 2129, 2123, 2130, + 2141, 2144, 2148, 2163, 2173, 2168, 2169, 2179, + 2187, 2187, 2182, 2179, 2178, 2183, 2181, 2182, + 2190, 2202, 2204, 2195, 2194, 2196, 2198, 2197, + 2193, 2187, 2186, 2189, 2192, 2196, 2199, 2201, + 2198, 2196, 2201, 2201, 2196, 2191, 2193, 2202, + 2216, 2225, 2226, 2224, 2223, 2229, 2231, 2231, + 2236, 2241, 2242, 2240, 2251, 2260, 2265, 2267, + 2277, 2277, 2271, 2278, 2290, 2294, 2292, 2293, + 2301, 2308, 2320, 2332, 2339, 2336, 2327, 2320, + 2330, 2349, 2359, 2361, 2361, 2364, 2361, 2366, + 2371, 2378, 2380, 2379, 2374, 2367, 2367, 2370, + 2375, 2376, 2373, 2374, 2376, 2366, 2361, 2363, + 2362, 2358, 2354, 2351, 2355, 2360, 2359, 2361, + 2364, 2368, 2372, 2374, 2376, 2378, 2382, 2385, + 2393, 2400, 2400, 2393, 2394, 2399, 2399, 2397, + 2397, 2398, 2399, 2399, 2406, 2415, 2414, 2408, + 2402, 2405, 2408, 2405, 2404, 2404, 2404, 2410, + 2414, 2417, 2423, 2419, 2419, 2420, 2418, 2420, + 2423, 2423, 2420, 2424, 2421, 2420, 2426, 2431, + 2429, 2423, 2417, 2413, 2413, 2413, 2420, 2425, + 2424, 2424, 2419, 2416, 2417, 2422, 2418, 2420, + 2423, 2423, 2422, 2426, 2436, 2441, 2442, 2444, + 2446, 2446, 2442, 2443, 2446, 2449, 2446, 2445, + 2449, 2454, 2459, 2457, 2453, 2451, 2448, 2443, + 2441, 2445, 2447, 2449, 2450, 2452, 2455, 2459, + 2457, 2451, 2444, 2439, 2439, 2441, 2448, 2453, + 2455, 2462, 2468, 2471, 2476, 2482, 2486, 2490, + 2486, 2488, 2493, 2500, 2511, 2517, 2520, 2518, + 2521, 2526, 2525, 2521, 2528, 2539, 2545, 2547, + 2554, 2562, 2568, 2573, 2578, 2581, 2586, 2592, + 2596, 2600, 2607, 2612, 2619, 2631, 2639, 2641, + 2639, 2635, 2634, 2639, 2647, 2647, 2645, 2651, + 2650, 2649, 2646, 2635, 2628, 2628, 2627, 2621, + 2614, 2604, 2593, 2591, 2596, 2601, 2595, 2588, + 2590, 2587, 2578, 2579, 2585, 2590, 2589, 2587, + 2589, 2587, 2581, 2582, 2583, 2578, 2572, 2576, + 2576, 2578, 2577, 2576, 2577, 2580, 2584, 2586, + 2588, 2583, 2581, 2587, 2588, 2585, 2591, 2602, + 2605, 2607, 2607, 2609, 2611, 2612, 2614, 2615, + 2615, 2610, 2610, 2610, 2608, 2608, 2609, 2611, + 2600, 2591, 2593, 2592, 2589, 2582, 2575, 2572, + 2572, 2567, 2562, 2557, 2553, 2541, 2532, 2534, + 2534, 2530, 2529, 2526, 2522, 2518, 2512, 2504, + 2507, 2514, 2506, 2494, 2493, 2495, 2490, 2485, + 2487, 2489, 2483, 2470, 2468, 2471, 2471, 2468, + 2465, 2458, 2454, 2449, 2444, 2438, 2429, 2418, + 2416, 2412, 2408, 2404, 2394, 2395, 2395, 2384, + 2376, 2369, 2365, 2359, 2350, 2343, 2343, 2339, + 2331, 2330, 2324, 2320, 2315, 2303, 2295, 2292, + 2289, 2281, 2279, 2276, 2273, 2268, 2266, 2264, + 2259, 2251, 2248, 2244, 2242, 2238, 2234, 2231, + 2231, 2223, 2218, 2218, 2221, 2217, 2209, 2205, + 2201, 2200, 2199, 2202, 2205, 2207, 2203, 2202, + 2201, 2198, 2195, 2195, 2194, 2192, 2191, 2194, + 2196, 2200, 2199, 2202, 2200, 2199, 2196, 2197, + 2203, 2201, 2202, 2204, 2207, 2208, 2211, 2216, + 2215, 2214, 2212, 2213, 2217, 2223, 2227, 2230, + 2236, 2239, 2248, 2254, 2258, 2263, 2269, 2277, + 2286, 2300, 2315, 2331, 2342, 2355, 2371, 2385, + 2398, 2413, 2430, 2443, 2458, 2473, 2486, 2497, + 2512, 2523, 2529, 2533, 2538, 2542, 2546, 2549, + 2553, 2559, 2564, 2564, 2560, 2563, 2559, 2552, + 2548, 2546, 2545, 2540, 2540, 2541, 2537, 2539, + 2544, 2542, 2536, 2531, 2532, 2528, 2522, 2519, + 2516, 2524, 2527, 2527, 2531, 2536, 2536, 2532, + 2531, 2539, 2544, 2544, 2545, 2553, 2564, 2570, + 2571, 2571, 2573, 2574, 2578, 2587, 2595, 2598, + 2603, 2610, 2618, 2628, 2632, 2640, 2652, 2653, + 2650, 2652, 2655, 2660, 2671, 2676, 2681, 2691, + 2688, 2681, 2687, 2690, 2696, 2699, 2698, 2704, + 2709, 2706, 2708, 2717, 2717, 2711, 2710, 2709, + 2710, 2704, 2696, 2691, 2681, 2675, 2668, 2654, + 2634, 2608, 2581, 2560, 2539, 2511, 2479, 2446, + 2408, 2367, 2330, 2289, 2248, 2195, 2139, 2091, + 2037, 1980, 1927, 1871, 1817, 1766, 1716, 1665, + 1613, 1558, 1507, 1465, 1427, 1394, 1363, 1339, + 1315, 1291, 1276, 1266, 1257, 1252, 1253, 1260, + 1271, 1279, 1294, 1316, 1338, 1365, 1393, 1420, + 1443, 1471, 1502, 1534, 1568, 1599, 1629, 1655, + 1681, 1709, 1734, 1755, 1774, 1789, 1803, 1818, + 1828, 1841, 1851, 1855, 1859, 1862, 1864, 1869, + 1868, 1860, 1856, 1850, 1845, 1842, 1837, 1832, + 1824, 1818, 1807, 1802, 1794, 1792, 1786, 1778, + 1773, 1767, 1767, 1769, 1772, 1773, 1772, 1773, + 1777, 1782, 1788, 1799, 1816, 1836, 1857, 1880, + 1905, 1928, 1951, 1974, 2000, 2027, 2055, 2085, + 2120, 2149, 2179, 2208, 2240, 2272, 2298, 2323, + 2347, 2371, 2397, 2422, 2446, 2467, 2487, 2501, + 2516, 2532, 2544, 2550, 2557, 2561, 2567, 2575, + 2578, 2578, 2579, 2580, 2583, 2585, 2585, 2586, + 2587, 2585, 2582, 2590, 2595, 2599, 2601, 2602, + 2608, 2619, 2631, 2635, 2642, 2649, 2660, 2669, + 2683, 2704, 2721, 2739, 2755, 2769, 2791, 2811, + 2829, 2849, 2870, 2888, 2909, 2931, 2948, 2968, + 2989, 3004, 3031, 3052, 3063, 3069, 3081, 3095, + 3102, 3097, 3073, 3042, 3007, 2964, 2919, 2869, + 2814, 2755, 2694, 2634, 2584, 2535, 2473, 2404, + 2319, 2222, 2138, 2079, 2021, 1957, 1890, 1819, + 1758, 1713, 1675, 1641, 1610, 1569, 1526, 1500, + 1493, 1504, 1519, 1531, 1548, 1567, 1587, 1608, + 1634, 1661, 1680, 1704, 1738, 1782, 1844, 1901, + 1949, 1987, 2025, 2062, 2095, 2129, 2158, 2179, + 2192, 2209, 2225, 2246, 2277, 2294, 2301, 2296, + 2281, 2267, 2259, 2260, 2268, 2267, 2258, 2245, + 2229, 2214, 2201, 2187, 2168, 2145, 2119, 2090, + 2065, 2040, 2013, 1981, 1950, 1932, 1907, 1860, + 1805, 1751, 1700, 1661, 1626, 1591, 1554, 1504, + 1442, 1388, 1340, 1296, 1263, 1237, 1213, 1194, + 1173, 1159, 1154, 1154, 1160, 1173, 1190, 1202, + 1210, 1213, 1242, 1277, 1318, 1370, 1421, 1473, + 1517, 1558, 1603, 1657, 1711, 1762, 1812, 1857, + 1895, 1926, 1956, 1985, 2009, 2027, 2039, 2044, + 2042, 2038, 2037, 2039, 2047, 2055, 2057, 2049, + 2030, 2008, 1990, 1981, 1974, 1971, 1966, 1957, + 1949, 1943, 1944, 1953, 1964, 1979, 1986, 1991, + 2002, 2018, 2040, 2069, 2099, 2130, 2163, 2189, + 2212, 2233, 2261, 2297, 2338, 2381, 2416, 2454, + 2493, 2537, 2578, 2621, 2664, 2701, 2730, 2753, + 2776, 2805, 2841, 2877, 2914, 2940, 2961, 2975, + 2984, 2993, 3008, 3028, 3044, 3054, 3055, 3054, + 3058, 3063, 3072, 3080, 3086, 3082, 3074, 3069, + 3070, 3078, 3094, 3116, 3134, 3147, 3155, 3161, + 3171, 3185, 3203, 3222, 3235, 3235, 3229, 3218, + 3210, 3205, 3190, 3171, 3144, 3109, 3055, 3002, + 2953, 2902, 2840, 2760, 2669, 2559, 2445, 2337, + 2236, 2132, 2031, 1930, 1828, 1731, 1635, 1546, + 1473, 1410, 1352, 1298, 1258, 1226, 1205, 1195, + 1206, 1238, 1269, 1305, 1354, 1404, 1461, 1534, + 1624, 1727, 1839, 1952, 2056, 2159, 2258, 2362, + 2465, 2569, 2668, 2751, 2819, 2882, 2944, 3005, + 3063, 3111, 3143, 3152, 3148, 3135, 3115, 3092, + 3068, 3039, 2996, 2942, 2881, 2812, 2744, 2679, + 2611, 2549, 2481, 2412, 2346, 2283, 2230, 2185, + 2142, 2090, 2025, 1945, 1869, 1809, 1762, 1720, + 1681, 1633, 1574, 1519, 1480, 1451, 1427, 1397, + 1363, 1325, 1286, 1258, 1241, 1236, 1234, 1229, + 1226, 1224, 1222, 1220, 1230, 1252, 1284, 1329, + 1379, 1436, 1490, 1540, 1591, 1652, 1720, 1787, + 1850, 1907, 1961, 2016, 2078, 2145, 2213, 2274, + 2319, 2349, 2369, 2380, 2387, 2400, 2411, 2407, + 2392, 2366, 2329, 2292, 2255, 2225, 2192, 2149, + 2101, 2046, 1995, 1956, 1932, 1913, 1897, 1880, + 1851, 1825, 1806, 1799, 1808, 1830, 1854, 1880, + 1905, 1935, 1978, 2031, 2093, 2154, 2209, 2259, + 2315, 2369, 2428, 2497, 2564, 2630, 2685, 2733, + 2777, 2822, 2862, 2904, 2943, 2976, 3003, 3026, + 3043, 3062, 3076, 3079, 3077, 3076, 3075, 3063, + 3048, 3035, 3029, 3022, 3021, 3021, 3020, 3012, + 3004, 3001, 2998, 3004, 3013, 3022, 3031, 3035, + 3038, 3044, 3054, 3058, 3057, 3050, 3036, 3019, + 2998, 2976, 2955, 2925, 2883, 2829, 2770, 2691, + 2600, 2506, 2403, 2296, 2176, 2054, 1938, 1819, + 1703, 1592, 1488, 1383, 1281, 1183, 1096, 1024, + 961, 917, 890, 874, 873, 880, 901, 937, + 983, 1040, 1112, 1195, 1283, 1390, 1504, 1623, + 1753, 1883, 2011, 2131, 2245, 2356, 2464, 2566, + 2664, 2752, 2833, 2906, 2968, 3010, 3039, 3068, + 3070, 3054, 3033, 3002, 2960, 2908, 2853, 2792, + 2724, 2645, 2564, 2476, 2380, 2289, 2199, 2116, + 2039, 1969, 1899, 1839, 1780, 1722, 1670, 1626, + 1585, 1544, 1503, 1462, 1412, 1370, 1340, 1320, + 1299, 1272, 1252, 1224, 1193, 1168, 1156, 1155, + 1152, 1147, 1140, 1129, 1116, 1113, 1115, 1130, + 1143, 1146, 1152, 1169, 1187, 1215, 1258, 1301, + 1345, 1385, 1428, 1469, 1511, 1555, 1611, 1669, + 1716, 1761, 1802, 1841, 1880, 1920, 1959, 1995, + 2024, 2045, 2060, 2069, 2073, 2071, 2067, 2057, + 2039, 2006, 1965, 1921, 1879, 1835, 1799, 1764, + 1727, 1688, 1654, 1621, 1596, 1575, 1562, 1556, + 1549, 1545, 1545, 1557, 1578, 1610, 1654, 1700, + 1752, 1808, 1869, 1935, 2007, 2089, 2173, 2253, + 2327, 2396, 2458, 2518, 2580, 2640, 2694, 2739, + 2772, 2798, 2824, 2852, 2878, 2901, 2925, 2935, + 2940, 2938, 2935, 2931, 2927, 2927, 2921, 2911, + 2897, 2881, 2866, 2861, 2861, 2860, 2860, 2859, + 2858, 2855, 2858, 2860, 2863, 2864, 2863, 2856, + 2841, 2817, 2798, 2777, 2750, 2716, 2676, 2629, + 2570, 2498, 2413, 2325, 2232, 2122, 2010, 1907, + 1791, 1673, 1558, 1448, 1348, 1253, 1159, 1073, + 993, 920, 863, 823, 799, 791, 793, 806, + 836, 870, 913, 973, 1048, 1135, 1229, 1332, + 1440, 1556, 1679, 1806, 1939, 2067, 2184, 2295, + 2398, 2490, 2579, 2663, 2733, 2800, 2849, 2882, + 2903, 2910, 2900, 2880, 2851, 2810, 2755, 2692, + 2623, 2550, 2473, 2393, 2308, 2220, 2127, 2035, + 1944, 1859, 1783, 1713, 1649, 1596, 1549, 1509, + 1478, 1445, 1415, 1385, 1360, 1340, 1317, 1291, + 1271, 1259, 1243, 1229, 1219, 1212, 1199, 1181, + 1170, 1164, 1165, 1161, 1158, 1156, 1153, 1149, + 1150, 1159, 1173, 1185, 1196, 1212, 1236, 1264, + 1297, 1339, 1383, 1424, 1464, 1507, 1547, 1584, + 1627, 1668, 1711, 1747, 1781, 1813, 1845, 1872, + 1901, 1928, 1947, 1958, 1964, 1965, 1962, 1954, + 1943, 1927, 1906, 1875, 1838, 1802, 1770, 1737, + 1702, 1671, 1644, 1620, 1597, 1577, 1565, 1556, + 1550, 1547, 1549, 1557, 1572, 1587, 1610, 1645, + 1686, 1734, 1786, 1845, 1906, 1973, 2045, 2126, + 2209, 2289, 2365, 2435, 2502, 2571, 2632, 2690, + 2745, 2789, 2826, 2859, 2890, 2916, 2935, 2955, + 2975, 2991, 2997, 2994, 2989, 2977, 2966, 2959, + 2952, 2949, 2937, 2913, 2888, 2865, 2848, 2834, + 2820, 2794, 2762, 2729, 2699, 2671, 2644, 2619, + 2584, 2538, 2488, 2428, 2368, 2301, 2224, 2142, + 2053, 1956, 1853, 1754, 1662, 1572, 1481, 1390, + 1308, 1226, 1147, 1074, 1012, 962, 921, 893, + 877, 865, 870, 889, 924, 970, 1024, 1086, + 1153, 1230, 1315, 1407, 1510, 1618, 1729, 1841, + 1944, 2043, 2141, 2233, 2319, 2402, 2475, 2538, + 2598, 2649, 2685, 2714, 2732, 2734, 2725, 2703, + 2663, 2611, 2549, 2481, 2415, 2348, 2276, 2196, + 2114, 2031, 1949, 1867, 1792, 1723, 1661, 1605, + 1552, 1505, 1468, 1436, 1411, 1383, 1352, 1314, + 1281, 1252, 1236, 1221, 1201, 1186, 1171, 1157, + 1149, 1149, 1146, 1136, 1132, 1127, 1123, 1124, + 1135, 1145, 1155, 1163, 1160, 1169, 1187, 1210, + 1238, 1273, 1311, 1355, 1404, 1452, 1503, 1550, + 1598, 1647, 1691, 1729, 1764, 1798, 1828, 1857, + 1885, 1910, 1928, 1939, 1953, 1964, 1968, 1963, + 1955, 1941, 1919, 1892, 1865, 1834, 1804, 1772, + 1731, 1695, 1659, 1627, 1603, 1584, 1566, 1557, + 1554, 1551, 1552, 1560, 1580, 1595, 1617, 1646, + 1679, 1724, 1772, 1825, 1882, 1938, 1994, 2063, + 2135, 2205, 2276, 2347, 2419, 2491, 2564, 2640, + 2709, 2770, 2815, 2857, 2897, 2932, 2966, 2993, + 3017, 3035, 3045, 3052, 3059, 3067, 3068, 3072, + 3071, 3054, 3030, 3006, 2988, 2967, 2945, 2926, + 2897, 2854, 2807, 2758, 2711, 2665, 2621, 2573, + 2512, 2443, 2366, 2289, 2212, 2128, 2034, 1924, + 1801, 1677, 1567, 1465, 1369, 1283, 1202, 1126, + 1051, 982, 931, 896, 866, 842, 835, 845, + 865, 900, 951, 1014, 1086, 1160, 1242, 1332, + 1430, 1535, 1650, 1772, 1896, 2020, 2142, 2253, + 2352, 2438, 2514, 2578, 2632, 2675, 2708, 2731, + 2748, 2755, 2752, 2738, 2707, 2660, 2601, 2531, + 2453, 2371, 2289, 2206, 2121, 2038, 1951, 1867, + 1784, 1701, 1624, 1556, 1497, 1452, 1413, 1382, + 1366, 1357, 1345, 1330, 1316, 1299, 1272, 1237, + 1203, 1181, 1167, 1153, 1142, 1134, 1123, 1102, + 1086, 1080, 1077, 1072, 1067, 1071, 1079, 1087, + 1099, 1120, 1149, 1174, 1197, 1227, 1260, 1301, + 1348, 1402, 1464, 1528, 1587, 1642, 1694, 1739, + 1779, 1814, 1845, 1873, 1894, 1913, 1928, 1946, + 1962, 1974, 1982, 1978, 1964, 1939, 1912, 1883, + 1856, 1827, 1793, 1758, 1719, 1677, 1640, 1610, + 1583, 1561, 1542, 1537, 1538, 1546, 1567, 1592, + 1623, 1659, 1689, 1718, 1751, 1791, 1831, 1877, + 1930, 1990, 2051, 2110, 2172, 2236, 2297, 2353, + 2402, 2449, 2495, 2541, 2584, 2619, 2648, 2671, + 2693, 2711, 2727, 2742, 2753, 2769, 2782, 2803, + 2829, 2851, 2878, 2904, 2927, 2941, 2950, 2951, + 2942, 2928, 2917, 2901, 2876, 2843, 2803, 2766, + 2714, 2660, 2605, 2539, 2459, 2361, 2250, 2134, + 2021, 1900, 1768, 1634, 1507, 1377, 1254, 1147, + 1050, 960, 877, 803, 754, 726, 703, 690, + 699, 722, 757, 805, 874, 956, 1044, 1134, + 1238, 1357, 1481, 1608, 1737, 1864, 1991, 2113, + 2225, 2328, 2418, 2488, 2545, 2587, 2618, 2635, + 2642, 2639, 2620, 2592, 2552, 2505, 2447, 2375, + 2296, 2214, 2126, 2035, 1947, 1857, 1771, 1686, + 1604, 1532, 1471, 1415, 1371, 1338, 1316, 1304, + 1307, 1318, 1330, 1339, 1343, 1344, 1338, 1328, + 1319, 1297, 1262, 1225, 1196, 1172, 1148, 1120, + 1093, 1068, 1037, 1005, 987, 976, 965, 949, + 943, 942, 943, 953, 976, 1006, 1038, 1073, + 1118, 1173, 1236, 1308, 1381, 1456, 1531, 1599, + 1659, 1718, 1767, 1807, 1843, 1878, 1908, 1926, + 1936, 1943, 1945, 1941, 1934, 1917, 1890, 1851, + 1806, 1761, 1719, 1673, 1624, 1579, 1538, 1496, + 1460, 1442, 1435, 1437, 1447, 1467, 1499, 1536, + 1581, 1632, 1683, 1737, 1795, 1853, 1914, 1979, + 2042, 2105, 2168, 2238, 2308, 2369, 2428, 2482, + 2533, 2582, 2623, 2661, 2688, 2700, 2712, 2724, + 2733, 2739, 2735, 2729, 2724, 2719, 2718, 2734, + 2756, 2772, 2784, 2800, 2822, 2836, 2839, 2823, + 2803, 2780, 2749, 2714, 2676, 2636, 2582, 2508, + 2439, 2379, 2307, 2207, 2097, 1977, 1841, 1695, + 1563, 1455, 1351, 1237, 1117, 1015, 923, 843, + 781, 739, 709, 686, 675, 696, 742, 803, + 874, 961, 1055, 1146, 1237, 1334, 1440, 1562, + 1693, 1830, 1968, 2097, 2218, 2322, 2415, 2498, + 2564, 2606, 2631, 2638, 2623, 2603, 2579, 2547, + 2506, 2451, 2371, 2276, 2176, 2077, 1988, 1900, + 1818, 1734, 1648, 1571, 1500, 1429, 1366, 1308, + 1252, 1206, 1176, 1163, 1164, 1186, 1215, 1244, + 1267, 1279, 1285, 1271, 1246, 1230, 1216, 1196, + 1172, 1147, 1109, 1061, 1018, 988, 970, 944, + 908, 878, 858, 847, 850, 874, 915, 942, + 958, 979, 1013, 1060, 1118, 1193, 1280, 1361, + 1435, 1512, 1598, 1679, 1755, 1819, 1866, 1903, + 1928, 1939, 1954, 1973, 1977, 1973, 1961, 1934, + 1892, 1842, 1790, 1744, 1700, 1654, 1600, 1540, + 1483, 1428, 1385, 1354, 1329, 1309, 1296, 1298, + 1318, 1358, 1414, 1485, 1560, 1628, 1696, 1767, + 1842, 1913, 1991, 2071, 2150, 2229, 2292, 2350, + 2414, 2479, 2535, 2582, 2628, 2658, 2673, 2682, + 2700, 2721, 2728, 2725, 2719, 2707, 2679, 2653, + 2642, 2645, 2649, 2649, 2658, 2676, 2697, 2726, + 2755, 2770, 2767, 2755, 2739, 2722, 2696, 2663, + 2621, 2565, 2499, 2432, 2359, 2262, 2157, 2046, + 1915, 1769, 1624, 1487, 1368, 1254, 1134, 1031, + 931, 833, 759, 706, 669, 645, 635, 651, + 689, 745, 819, 914, 1021, 1131, 1240, 1348, + 1460, 1580, 1706, 1839, 1977, 2111, 2231, 2338, + 2431, 2513, 2577, 2616, 2638, 2643, 2627, 2592, + 2550, 2503, 2451, 2386, 2304, 2208, 2103, 1997, + 1897, 1801, 1719, 1645, 1576, 1513, 1455, 1402, + 1358, 1322, 1296, 1270, 1253, 1244, 1252, 1269, + 1290, 1315, 1335, 1346, 1342, 1325, 1299, 1269, + 1236, 1190, 1140, 1090, 1038, 986, 931, 880, + 837, 794, 755, 723, 711, 714, 726, 754, + 795, 844, 896, 954, 1020, 1100, 1186, 1273, + 1369, 1472, 1574, 1672, 1766, 1855, 1932, 1995, + 2040, 2069, 2094, 2106, 2103, 2096, 2079, 2048, + 2006, 1953, 1897, 1834, 1774, 1708, 1641, 1579, + 1520, 1465, 1414, 1377, 1348, 1328, 1321, 1319, + 1329, 1361, 1410, 1471, 1540, 1618, 1698, 1779, + 1866, 1952, 2034, 2117, 2192, 2258, 2320, 2377, + 2431, 2479, 2521, 2558, 2581, 2596, 2610, 2617, + 2616, 2618, 2625, 2624, 2610, 2601, 2597, 2589, + 2584, 2589, 2594, 2612, 2633, 2651, 2692, 2745, + 2787, 2813, 2835, 2854, 2852, 2837, 2821, 2803, + 2774, 2715, 2641, 2566, 2481, 2384, 2272, 2143, + 2003, 1843, 1666, 1507, 1374, 1251, 1128, 1015, + 915, 821, 744, 691, 659, 650, 654, 671, + 713, 783, 872, 979, 1108, 1238, 1364, 1477, + 1592, 1713, 1838, 1966, 2090, 2207, 2314, 2405, + 2475, 2525, 2559, 2571, 2561, 2537, 2497, 2435, + 2363, 2295, 2229, 2157, 2073, 1981, 1880, 1778, + 1689, 1613, 1551, 1506, 1470, 1436, 1418, 1406, + 1398, 1399, 1408, 1421, 1435, 1449, 1461, 1480, + 1502, 1516, 1514, 1500, 1473, 1432, 1372, 1303, + 1236, 1162, 1081, 995, 917, 848, 785, 718, + 669, 632, 595, 575, 574, 601, 646, 693, + 755, 835, 929, 1024, 1124, 1236, 1354, 1468, + 1576, 1688, 1800, 1903, 1985, 2051, 2106, 2150, + 2168, 2162, 2149, 2130, 2093, 2045, 1989, 1929, + 1862, 1792, 1715, 1639, 1573, 1511, 1451, 1398, + 1359, 1335, 1321, 1323, 1331, 1356, 1402, 1453, + 1507, 1576, 1665, 1755, 1838, 1929, 2023, 2110, + 2190, 2261, 2323, 2373, 2415, 2449, 2473, 2497, + 2513, 2504, 2491, 2485, 2468, 2443, 2430, 2413, + 2380, 2358, 2355, 2354, 2349, 2368, 2388, 2403, + 2436, 2478, 2526, 2594, 2673, 2745, 2809, 2877, + 2926, 2942, 2962, 2981, 2972, 2937, 2882, 2829, + 2752, 2666, 2568, 2448, 2320, 2183, 2012, 1813, + 1625, 1455, 1286, 1138, 1015, 902, 802, 715, + 646, 613, 614, 626, 649, 694, 772, 872, + 983, 1118, 1271, 1428, 1569, 1695, 1806, 1920, + 2040, 2151, 2251, 2344, 2415, 2460, 2491, 2500, + 2491, 2458, 2398, 2319, 2231, 2136, 2038, 1941, + 1856, 1782, 1709, 1633, 1556, 1487, 1428, 1387, + 1366, 1364, 1378, 1396, 1416, 1443, 1479, 1520, + 1565, 1604, 1637, 1658, 1671, 1679, 1685, 1674, + 1649, 1602, 1528, 1432, 1320, 1199, 1073, 955, + 842, 731, 635, 553, 482, 426, 391, 382, + 389, 409, 450, 515, 603, 706, 824, 959, + 1108, 1257, 1397, 1531, 1672, 1808, 1928, 2040, + 2137, 2213, 2259, 2286, 2291, 2285, 2256, 2196, + 2120, 2038, 1952, 1861, 1764, 1679, 1604, 1528, + 1451, 1384, 1332, 1293, 1267, 1256, 1265, 1294, + 1334, 1386, 1453, 1535, 1634, 1741, 1845, 1948, + 2053, 2151, 2234, 2305, 2380, 2451, 2504, 2523, + 2527, 2531, 2528, 2509, 2474, 2446, 2422, 2382, + 2322, 2274, 2253, 2240, 2215, 2184, 2172, 2186, + 2199, 2212, 2257, 2327, 2392, 2450, 2522, 2612, + 2714, 2823, 2921, 3008, 3092, 3154, 3180, 3186, + 3189, 3174, 3128, 3049, 2951, 2839, 2711, 2572, + 2418, 2254, 2092, 1912, 1708, 1505, 1315, 1151, + 1010, 895, 805, 739, 696, 670, 667, 710, + 786, 872, 967, 1070, 1196, 1336, 1482, 1634, + 1793, 1945, 2069, 2157, 2225, 2301, 2370, 2412, + 2438, 2451, 2442, 2407, 2349, 2283, 2213, 2133, + 2031, 1925, 1823, 1731, 1643, 1573, 1531, 1507, + 1497, 1485, 1485, 1492, 1520, 1560, 1611, 1676, + 1738, 1796, 1848, 1893, 1934, 1964, 1978, 1976, + 1957, 1904, 1815, 1726, 1631, 1513, 1380, 1243, + 1097, 940, 788, 649, 532, 436, 351, 290, + 258, 256, 276, 316, 391, 494, 613, 739, + 878, 1029, 1181, 1343, 1509, 1669, 1819, 1947, + 2052, 2145, 2220, 2263, 2282, 2284, 2264, 2223, + 2158, 2081, 1997, 1914, 1827, 1736, 1646, 1560, + 1483, 1424, 1377, 1346, 1339, 1346, 1359, 1391, + 1444, 1512, 1579, 1658, 1751, 1849, 1944, 2040, + 2133, 2221, 2300, 2372, 2426, 2464, 2490, 2496, + 2484, 2467, 2437, 2400, 2360, 2309, 2255, 2205, + 2169, 2130, 2080, 2051, 2049, 2068, 2081, 2113, + 2173, 2239, 2309, 2396, 2499, 2606, 2715, 2815, + 2917, 3026, 3140, 3237, 3323, 3408, 3472, 3491, + 3454, 3398, 3342, 3252, 3136, 3009, 2868, 2715, + 2552, 2390, 2240, 2090, 1934, 1769, 1609, 1465, + 1338, 1221, 1116, 1058, 1049, 1040, 1032, 1052, + 1100, 1169, 1245, 1330, 1438, 1550, 1650, 1740, + 1838, 1933, 2015, 2072, 2112, 2149, 2167, 2156, + 2133, 2126, 2121, 2105, 2072, 2027, 1981, 1930, + 1881, 1839, 1802, 1768, 1740, 1723, 1721, 1739, + 1773, 1812, 1866, 1924, 1988, 2047, 2102, 2159, + 2210, 2251, 2274, 2286, 2278, 2254, 2212, 2157, + 2084, 1999, 1909, 1802, 1678, 1548, 1416, 1278, + 1139, 997, 841, 704, 599, 505, 421, 370, + 363, 374, 395, 448, 538, 646, 759, 880, + 1015, 1157, 1299, 1422, 1541, 1671, 1790, 1879, + 1949, 2008, 2060, 2084, 2077, 2065, 2043, 2003, + 1939, 1867, 1803, 1735, 1659, 1589, 1536, 1507, + 1486, 1466, 1462, 1485, 1534, 1587, 1638, 1703, + 1781, 1853, 1917, 1987, 2058, 2121, 2172, 2215, + 2258, 2301, 2331, 2335, 2341, 2355, 2355, 2327, + 2291, 2261, 2221, 2172, 2122, 2080, 2050, 2030, + 2012, 2015, 2042, 2060, 2081, 2126, 2184, 2241, + 2296, 2369, 2449, 2526, 2596, 2663, 2741, 2830, + 2900, 2954, 3003, 3058, 3092, 3101, 3128, 3167, + 3178, 3160, 3129, 3100, 3050, 2972, 2880, 2785, + 2696, 2597, 2481, 2383, 2299, 2221, 2146, 2075, + 2018, 1959, 1883, 1804, 1739, 1681, 1619, 1568, + 1548, 1541, 1536, 1536, 1548, 1577, 1613, 1648, + 1678, 1710, 1737, 1750, 1758, 1779, 1804, 1822, + 1826, 1831, 1845, 1852, 1858, 1872, 1904, 1943, + 1970, 1991, 2015, 2044, 2070, 2084, 2097, 2110, + 2117, 2118, 2120, 2135, 2155, 2171, 2188, 2210, + 2226, 2223, 2208, 2194, 2173, 2142, 2097, 2046, + 1988, 1918, 1836, 1761, 1699, 1622, 1528, 1438, + 1355, 1269, 1186, 1109, 1036, 968, 906, 845, + 798, 773, 757, 749, 762, 803, 857, 915, + 984, 1067, 1151, 1229, 1305, 1380, 1451, 1518, + 1568, 1613, 1657, 1693, 1716, 1736, 1756, 1768, + 1769, 1759, 1750, 1750, 1744, 1728, 1709, 1700, + 1702, 1700, 1700, 1712, 1735, 1766, 1799, 1839, + 1887, 1935, 1969, 1999, 2036, 2069, 2092, 2106, + 2117, 2130, 2136, 2136, 2145, 2153, 2148, 2145, + 2142, 2141, 2136, 2131, 2134, 2147, 2154, 2157, + 2164, 2171, 2176, 2200, 2244, 2290, 2326, 2368, + 2436, 2502, 2560, 2631, 2712, 2769, 2814, 2855, + 2894, 2939, 2991, 3028, 3042, 3069, 3115, 3144, + 3139, 3149, 3177, 3146, 3045, 2956, 2888, 2804, + 2708, 2608, 2497, 2401, 2333, 2263, 2194, 2157, + 2126, 2058, 1970, 1902, 1862, 1818, 1760, 1719, + 1681, 1625, 1582, 1558, 1531, 1528, 1528, 1526, + 1534, 1553, 1588, 1610, 1631, 1655, 1670, 1654, + 1639, 1651, 1670, 1683, 1721, 1789, 1857, 1919, + 1977, 2027, 2076, 2120, 2145, 2162, 2177, 2191, + 2200, 2201, 2211, 2226, 2230, 2219, 2210, 2200, + 2188, 2183, 2180, 2179, 2162, 2132, 2093, 2045, + 1983, 1911, 1840, 1773, 1711, 1638, 1572, 1539, + 1512, 1456, 1381, 1314, 1248, 1178, 1112, 1042, + 980, 936, 887, 833, 809, 817, 825, 832, + 859, 909, 961, 1014, 1085, 1169, 1246, 1316, + 1375, 1420, 1468, 1524, 1575, 1623, 1672, 1715, + 1746, 1773, 1802, 1822, 1833, 1823, 1807, 1794, + 1778, 1761, 1754, 1754, 1768, 1792, 1804, 1818, + 1845, 1882, 1918, 1951, 1984, 2014, 2036, 2047, + 2062, 2071, 2068, 2066, 2068, 2068, 2064, 2063, + 2077, 2103, 2118, 2120, 2135, 2152, 2149, 2139, + 2148, 2171, 2185, 2192, 2211, 2254, 2303, 2353, + 2404, 2436, 2463, 2510, 2546, 2562, 2586, 2620, + 2648, 2674, 2701, 2718, 2744, 2786, 2828, 2847, + 2860, 2897, 2940, 2944, 2953, 2989, 3012, 3010, + 3010, 3007, 2977, 2931, 2881, 2830, 2764, 2696, + 2632, 2553, 2463, 2383, 2308, 2227, 2147, 2068, + 1981, 1885, 1804, 1738, 1656, 1584, 1538, 1514, + 1501, 1484, 1482, 1504, 1534, 1573, 1613, 1649, + 1691, 1734, 1762, 1782, 1814, 1847, 1865, 1877, + 1896, 1922, 1940, 1954, 1973, 1997, 2022, 2036, + 2039, 2043, 2052, 2057, 2055, 2059, 2061, 2064, + 2065, 2076, 2094, 2119, 2139, 2155, 2175, 2187, + 2186, 2175, 2156, 2131, 2096, 2051, 1997, 1944, + 1877, 1783, 1686, 1620, 1554, 1449, 1335, 1249, + 1153, 1045, 978, 932, 869, 820, 804, 793, + 790, 821, 881, 942, 1009, 1099, 1189, 1267, + 1349, 1437, 1508, 1563, 1617, 1660, 1676, 1686, + 1705, 1723, 1722, 1712, 1703, 1688, 1666, 1651, + 1646, 1636, 1634, 1650, 1663, 1682, 1726, 1772, + 1822, 1888, 1957, 2014, 2065, 2121, 2172, 2209, + 2237, 2255, 2252, 2240, 2225, 2204, 2169, 2139, + 2119, 2081, 2047, 2036, 2029, 2002, 1986, 2001, + 2023, 2039, 2065, 2114, 2155, 2197, 2257, 2326, + 2387, 2446, 2502, 2539, 2590, 2671, 2725, 2742, + 2786, 2852, 2893, 2909, 2931, 2955, 2967, 2974, + 2990, 3006, 3012, 3030, 3055, 3078, 3110, 3146, + 3172, 3187, 3175, 3122, 3050, 2998, 2952, 2876, + 2779, 2702, 2649, 2594, 2518, 2453, 2423, 2375, + 2289, 2205, 2122, 2041, 1980, 1915, 1848, 1793, + 1727, 1661, 1602, 1558, 1544, 1537, 1531, 1556, + 1597, 1638, 1679, 1727, 1763, 1782, 1783, 1771, + 1775, 1793, 1826, 1875, 1938, 2019, 2096, 2144, + 2174, 2207, 2230, 2232, 2226, 2229, 2232, 2235, + 2238, 2249, 2267, 2275, 2267, 2261, 2266, 2270, + 2278, 2291, 2310, 2326, 2314, 2272, 2217, 2158, + 2089, 2015, 1952, 1906, 1868, 1820, 1771, 1747, + 1731, 1670, 1566, 1474, 1385, 1287, 1202, 1122, + 1035, 976, 956, 932, 901, 904, 930, 952, + 991, 1055, 1130, 1195, 1253, 1314, 1372, 1419, + 1463, 1505, 1539, 1569, 1616, 1675, 1730, 1765, + 1786, 1802, 1815, 1814, 1802, 1780, 1758, 1764, + 1780, 1789, 1814, 1862, 1914, 1967, 2019, 2068, + 2111, 2153, 2194, 2211, 2219, 2230, 2220, 2196, + 2171, 2142, 2109, 2083, 2068, 2048, 2031, 2030, + 2039, 2044, 2040, 2048, 2071, 2099, 2123, 2159, + 2208, 2266, 2333, 2404, 2458, 2498, 2553, 2617, + 2651, 2660, 2681, 2704, 2706, 2691, 2674, 2667, + 2662, 2652, 2653, 2663, 2680, 2704, 2738, 2777, + 2833, 2895, 2936, 2970, 3020, 3065, 3101, 3148, + 3207, 3260, 3300, 3332, 3338, 3311, 3244, 3157, + 3055, 2947, 2826, 2691, 2553, 2429, 2328, 2240, + 2156, 2069, 1987, 1916, 1854, 1798, 1759, 1717, + 1672, 1653, 1667, 1676, 1669, 1679, 1708, 1740, + 1781, 1833, 1874, 1906, 1930, 1941, 1929, 1913, + 1895, 1866, 1836, 1814, 1812, 1829, 1856, 1895, + 1946, 1994, 2042, 2084, 2128, 2170, 2203, 2235, + 2266, 2292, 2311, 2320, 2325, 2338, 2348, 2342, + 2331, 2325, 2320, 2301, 2262, 2216, 2163, 2097, + 2025, 1953, 1890, 1838, 1796, 1768, 1755, 1738, + 1678, 1583, 1524, 1524, 1492, 1387, 1313, 1302, + 1264, 1200, 1181, 1187, 1175, 1151, 1115, 1105, + 1128, 1150, 1177, 1219, 1268, 1316, 1358, 1394, + 1436, 1476, 1523, 1577, 1629, 1681, 1720, 1745, + 1779, 1820, 1839, 1841, 1836, 1835, 1843, 1849, + 1852, 1870, 1909, 1941, 1944, 1944, 1968, 1999, + 2008, 2017, 2038, 2055, 2055, 2050, 2057, 2070, + 2073, 2060, 2049, 2050, 2058, 2059, 2054, 2064, + 2087, 2092, 2088, 2084, 2103, 2136, 2159, 2183, + 2222, 2267, 2310, 2349, 2391, 2434, 2465, 2475, + 2489, 2517, 2542, 2564, 2576, 2602, 2640, 2683, + 2727, 2763, 2792, 2822, 2893, 2982, 3023, 3033, + 3073, 3122, 3156, 3207, 3257, 3268, 3288, 3328, + 3359, 3391, 3399, 3342, 3235, 3125, 3034, 2927, + 2795, 2671, 2547, 2464, 2432, 2398, 2365, 2327, + 2260, 2199, 2151, 2078, 2010, 1966, 1924, 1892, + 1861, 1812, 1760, 1710, 1682, 1660, 1624, 1618, + 1643, 1664, 1687, 1723, 1746, 1744, 1728, 1693, + 1662, 1659, 1673, 1709, 1777, 1874, 1986, 2078, + 2131, 2162, 2187, 2193, 2185, 2180, 2179, 2174, + 2171, 2187, 2212, 2224, 2217, 2197, 2177, 2170, + 2173, 2182, 2197, 2213, 2218, 2200, 2168, 2126, + 2074, 2021, 1980, 1956, 1951, 1960, 1976, 1994, + 1990, 1953, 1870, 1770, 1693, 1623, 1514, 1393, + 1338, 1331, 1292, 1241, 1226, 1199, 1124, 1047, + 1013, 1026, 1043, 1046, 1072, 1135, 1198, 1244, + 1300, 1372, 1438, 1487, 1540, 1604, 1674, 1726, + 1742, 1749, 1765, 1768, 1732, 1679, 1657, 1657, + 1664, 1678, 1705, 1744, 1778, 1791, 1795, 1820, + 1856, 1881, 1907, 1952, 1996, 2032, 2074, 2104, + 2119, 2124, 2110, 2079, 2046, 2023, 2009, 1982, + 1947, 1923, 1905, 1880, 1860, 1867, 1885, 1908, + 1937, 1991, 2068, 2132, 2179, 2234, 2293, 2334, + 2370, 2401, 2419, 2438, 2479, 2513, 2518, 2531, + 2549, 2544, 2525, 2524, 2537, 2549, 2556, 2573, + 2607, 2654, 2705, 2766, 2848, 2924, 2965, 3009, + 3095, 3191, 3244, 3263, 3285, 3322, 3360, 3369, + 3358, 3366, 3377, 3362, 3309, 3223, 3100, 2971, + 2853, 2705, 2544, 2429, 2334, 2258, 2244, 2247, + 2249, 2259, 2246, 2209, 2162, 2093, 2036, 1997, + 1927, 1841, 1792, 1772, 1753, 1701, 1644, 1621, + 1614, 1607, 1606, 1603, 1600, 1609, 1609, 1587, + 1573, 1569, 1570, 1597, 1651, 1730, 1838, 1959, + 2065, 2153, 2212, 2247, 2253, 2234, 2202, 2168, + 2139, 2119, 2113, 2118, 2127, 2127, 2128, 2135, + 2136, 2143, 2153, 2172, 2190, 2190, 2179, 2166, + 2147, 2123, 2095, 2068, 2062, 2066, 2078, 2096, + 2113, 2110, 2076, 2028, 1963, 1880, 1789, 1692, + 1585, 1439, 1286, 1214, 1227, 1225, 1179, 1161, + 1195, 1237, 1278, 1329, 1359, 1366, 1356, 1329, + 1322, 1337, 1354, 1373, 1427, 1494, 1557, 1610, + 1653, 1676, 1670, 1652, 1633, 1618, 1592, 1550, + 1524, 1539, 1592, 1648, 1708, 1783, 1849, 1916, + 1987, 2036, 2066, 2101, 2110, 2080, 2044, 2026, + 2007, 1983, 1963, 1957, 1956, 1956, 1944, 1929, + 1928, 1926, 1899, 1866, 1847, 1847, 1861, 1889, + 1921, 1962, 2034, 2115, 2179, 2234, 2301, 2358, + 2384, 2393, 2392, 2381, 2362, 2343, 2330, 2339, + 2362, 2383, 2408, 2442, 2475, 2524, 2594, 2642, + 2654, 2663, 2705, 2764, 2806, 2840, 2899, 2984, + 3073, 3150, 3210, 3274, 3351, 3398, 3413, 3414, + 3426, 3448, 3427, 3394, 3394, 3422, 3435, 3389, + 3293, 3187, 3082, 2982, 2890, 2789, 2677, 2584, + 2551, 2552, 2545, 2534, 2520, 2465, 2386, 2306, + 2218, 2135, 2067, 1985, 1891, 1796, 1711, 1655, + 1602, 1532, 1459, 1434, 1451, 1476, 1514, 1567, + 1615, 1641, 1652, 1656, 1658, 1666, 1684, 1714, + 1771, 1860, 1952, 2039, 2107, 2133, 2122, 2096, + 2060, 2029, 2009, 1992, 1984, 2002, 2044, 2093, + 2131, 2166, 2195, 2222, 2254, 2291, 2333, 2381, + 2411, 2416, 2396, 2362, 2316, 2259, 2200, 2145, + 2107, 2091, 2088, 2089, 2084, 2057, 2020, 1972, + 1921, 1875, 1833, 1805, 1787, 1760, 1725, 1711, + 1724, 1723, 1665, 1582, 1539, 1528, 1519, 1470, + 1395, 1321, 1257, 1221, 1211, 1204, 1206, 1241, + 1307, 1386, 1481, 1564, 1612, 1640, 1645, 1639, + 1637, 1644, 1652, 1669, 1688, 1710, 1743, 1777, + 1792, 1785, 1773, 1763, 1752, 1748, 1750, 1751, + 1761, 1784, 1804, 1820, 1848, 1890, 1937, 1973, + 1999, 2027, 2053, 2064, 2054, 2025, 1990, 1950, + 1912, 1883, 1867, 1856, 1844, 1858, 1887, 1904, + 1929, 1966, 1997, 2011, 2021, 2044, 2090, 2135, + 2170, 2194, 2221, 2265, 2308, 2339, 2360, 2365, + 2374, 2383, 2393, 2411, 2432, 2433, 2417, 2442, + 2509, 2565, 2589, 2630, 2706, 2777, 2825, 2879, + 2951, 3017, 3067, 3106, 3145, 3206, 3269, 3305, + 3331, 3370, 3399, 3399, 3409, 3429, 3426, 3423, + 3438, 3448, 3428, 3388, 3318, 3224, 3143, 3055, + 2938, 2822, 2753, 2717, 2689, 2666, 2655, 2661, + 2657, 2613, 2524, 2431, 2341, 2221, 2102, 2012, + 1921, 1819, 1714, 1615, 1549, 1530, 1516, 1486, + 1483, 1518, 1560, 1594, 1627, 1650, 1647, 1627, + 1606, 1601, 1617, 1644, 1689, 1759, 1844, 1919, + 1969, 1991, 1983, 1960, 1934, 1899, 1879, 1887, + 1909, 1937, 1996, 2073, 2145, 2204, 2262, 2319, + 2371, 2416, 2452, 2479, 2500, 2503, 2474, 2425, + 2365, 2308, 2251, 2209, 2191, 2197, 2208, 2216, + 2229, 2240, 2232, 2203, 2160, 2115, 2081, 2062, + 2057, 2063, 2082, 2102, 2109, 2102, 2086, 2055, + 2006, 1946, 1855, 1713, 1552, 1432, 1352, 1247, + 1135, 1105, 1156, 1213, 1273, 1373, 1474, 1529, + 1555, 1553, 1526, 1488, 1435, 1396, 1396, 1421, + 1447, 1484, 1523, 1547, 1561, 1565, 1553, 1534, + 1524, 1516, 1511, 1525, 1554, 1587, 1630, 1687, + 1742, 1811, 1896, 1976, 2036, 2089, 2132, 2128, + 2082, 2033, 1984, 1932, 1874, 1837, 1834, 1856, + 1881, 1912, 1958, 2005, 2033, 2043, 2056, 2062, + 2060, 2052, 2051, 2059, 2071, 2088, 2103, 2109, + 2114, 2124, 2127, 2114, 2101, 2088, 2075, 2049, + 2015, 1989, 1971, 1978, 2007, 2040, 2083, 2137, + 2211, 2308, 2398, 2456, 2487, 2520, 2553, 2590, + 2637, 2610, 2541, 2576, 2666, 2721, 2798, 2921, + 3018, 3073, 3113, 3155, 3193, 3195, 3196, 3234, + 3295, 3344, 3386, 3442, 3477, 3483, 3516, 3567, + 3562, 3505, 3425, 3332, 3226, 3113, 3003, 2915, + 2846, 2762, 2686, 2652, 2632, 2626, 2646, 2648, + 2600, 2514, 2408, 2265, 2114, 1969, 1837, 1697, + 1544, 1430, 1392, 1388, 1372, 1366, 1399, 1443, + 1472, 1489, 1481, 1450, 1434, 1427, 1410, 1403, + 1418, 1449, 1494, 1555, 1620, 1690, 1760, 1808, + 1831, 1839, 1830, 1823, 1830, 1841, 1857, 1901, + 1974, 2050, 2131, 2226, 2331, 2429, 2521, 2589, + 2625, 2644, 2641, 2605, 2553, 2498, 2446, 2401, + 2368, 2349, 2345, 2357, 2375, 2392, 2406, 2406, + 2386, 2341, 2282, 2228, 2182, 2144, 2109, 2078, + 2060, 2044, 2018, 1989, 1961, 1934, 1897, 1845, + 1788, 1732, 1671, 1601, 1516, 1439, 1390, 1356, + 1315, 1272, 1251, 1253, 1265, 1276, 1291, 1306, + 1319, 1320, 1325, 1343, 1362, 1369, 1373, 1381, + 1393, 1409, 1439, 1474, 1514, 1554, 1591, 1634, + 1669, 1688, 1684, 1682, 1694, 1712, 1736, 1770, + 1812, 1866, 1925, 1980, 2018, 2044, 2056, 2048, + 2034, 2023, 2012, 1992, 1969, 1961, 1960, 1964, + 1961, 1956, 1950, 1952, 1952, 1947, 1946, 1939, + 1924, 1908, 1891, 1874, 1865, 1863, 1854, 1854, + 1864, 1870, 1863, 1855, 1852, 1846, 1824, 1794, + 1780, 1781, 1785, 1791, 1802, 1816, 1839, 1868, + 1903, 1943, 1974, 1996, 2020, 2039, 2066, 2101, + 2126, 2145, 2173, 2219, 2276, 2326, 2383, 2457, + 2529, 2596, 2678, 2775, 2858, 2928, 3002, 3073, + 3156, 3217, 3222, 3232, 3276, 3292, 3278, 3276, + 3286, 3298, 3326, 3372, 3409, 3426, 3448, 3477, + 3507, 3517, 3507, 3499, 3475, 3430, 3384, 3331, + 3252, 3169, 3102, 3032, 2937, 2838, 2773, 2714, + 2632, 2546, 2452, 2363, 2276, 2179, 2062, 1935, + 1831, 1751, 1652, 1538, 1472, 1461, 1462, 1453, + 1460, 1505, 1543, 1560, 1562, 1537, 1486, 1430, + 1380, 1344, 1329, 1335, 1370, 1432, 1511, 1599, + 1677, 1734, 1790, 1847, 1884, 1926, 1987, 2058, + 2126, 2195, 2258, 2320, 2373, 2411, 2448, 2487, + 2526, 2572, 2614, 2641, 2658, 2661, 2637, 2591, + 2545, 2506, 2478, 2464, 2477, 2514, 2556, 2588, + 2604, 2602, 2572, 2518, 2446, 2365, 2292, 2233, + 2181, 2132, 2089, 2049, 2002, 1947, 1891, 1842, + 1802, 1771, 1752, 1737, 1724, 1714, 1703, 1677, + 1641, 1606, 1585, 1577, 1578, 1594, 1610, 1607, + 1584, 1557, 1530, 1489, 1431, 1367, 1306, 1285, + 1323, 1372, 1373, 1384, 1451, 1526, 1581, 1625, + 1663, 1702, 1742, 1767, 1791, 1811, 1811, 1794, + 1771, 1771, 1786, 1799, 1812, 1831, 1854, 1872, + 1884, 1894, 1914, 1926, 1917, 1921, 1956, 1998, + 2021, 2032, 2043, 2061, 2074, 2051, 2014, 1986, + 1959, 1926, 1888, 1848, 1817, 1794, 1764, 1740, + 1734, 1741, 1755, 1765, 1781, 1802, 1810, 1809, + 1808, 1798, 1776, 1754, 1729, 1708, 1694, 1692, + 1680, 1667, 1657, 1655, 1647, 1641, 1651, 1658, + 1673, 1705, 1741, 1766, 1792, 1835, 1890, 1935, + 1957, 1977, 2017, 2055, 2080, 2109, 2140, 2164, + 2188, 2224, 2263, 2305, 2344, 2396, 2466, 2534, + 2617, 2713, 2807, 2896, 2988, 3086, 3178, 3240, + 3270, 3278, 3263, 3229, 3190, 3154, 3122, 3091, + 3079, 3114, 3189, 3260, 3320, 3390, 3475, 3555, + 3606, 3610, 3599, 3605, 3578, 3521, 3455, 3383, + 3306, 3208, 3112, 3042, 2970, 2890, 2812, 2744, + 2699, 2661, 2598, 2528, 2484, 2433, 2374, 2329, + 2285, 2244, 2187, 2104, 2015, 1908, 1774, 1629, + 1506, 1424, 1369, 1336, 1349, 1409, 1490, 1561, + 1624, 1652, 1664, 1676, 1661, 1644, 1666, 1708, + 1753, 1807, 1861, 1918, 1961, 1974, 1972, 1982, + 2004, 2041, 2097, 2170, 2258, 2338, 2399, 2453, + 2491, 2511, 2525, 2541, 2584, 2645, 2696, 2737, + 2767, 2767, 2730, 2658, 2561, 2472, 2398, 2340, + 2309, 2314, 2344, 2376, 2398, 2402, 2387, 2353, + 2298, 2240, 2195, 2154, 2115, 2075, 2035, 1984, + 1919, 1833, 1744, 1672, 1617, 1581, 1569, 1581, + 1606, 1630, 1642, 1640, 1628, 1607, 1581, 1567, + 1578, 1602, 1643, 1691, 1733, 1760, 1766, 1759, + 1733, 1704, 1681, 1673, 1688, 1724, 1778, 1837, + 1898, 1950, 1994, 2018, 2006, 1947, 1860, 1802, + 1808, 1852, 1877, 1871, 1876, 1905, 1928, 1927, + 1913, 1887, 1844, 1813, 1817, 1858, 1912, 1934, + 1926, 1913, 1900, 1874, 1832, 1788, 1751, 1724, + 1708, 1705, 1715, 1720, 1702, 1674, 1656, 1661, + 1676, 1684, 1686, 1701, 1723, 1732, 1718, 1693, + 1667, 1641, 1611, 1590, 1586, 1595, 1614, 1630, + 1644, 1658, 1660, 1638, 1616, 1619, 1628, 1629, + 1638, 1662, 1703, 1733, 1745, 1760, 1780, 1787, + 1779, 1769, 1774, 1787, 1798, 1794, 1791, 1788, + 1786, 1790, 1795, 1810, 1831, 1853, 1884, 1930, + 1974, 2000, 2014, 2016, 2009, 1999, 1991, 1991, + 1995, 2005, 2030, 2059, 2084, 2107, 2125, 2147, + 2175, 2207, 2246, 2290, 2337, 2392, 2451, 2507, + 2555, 2598, 2638, 2667, 2690, 2719, 2744, 2751, + 2748, 2745, 2745, 2760, 2783, 2827, 2871, 2902, + 2943, 3006, 3067, 3102, 3129, 3176, 3221, 3233, + 3258, 3285, 3304, 3307, 3285, 3257, 3210, 3162, + 3135, 3116, 3096, 3072, 3061, 3066, 3069, 3044, + 3013, 2994, 2960, 2933, 2904, 2868, 2849, 2832, + 2808, 2778, 2711, 2622, 2529, 2419, 2281, 2128, + 1981, 1840, 1737, 1683, 1663, 1682, 1732, 1810, + 1909, 2005, 2075, 2105, 2088, 2029, 1944, 1831, + 1726, 1639, 1568, 1521, 1501, 1511, 1545, 1591, + 1631, 1669, 1715, 1770, 1836, 1901, 1958, 2015, + 2062, 2089, 2103, 2105, 2089, 2074, 2069, 2074, + 2094, 2116, 2134, 2150, 2150, 2128, 2089, 2045, + 2016, 2010, 2029, 2077, 2155, 2245, 2333, 2399, + 2435, 2435, 2393, 2327, 2242, 2154, 2072, 1999, + 1945, 1904, 1870, 1845, 1828, 1820, 1829, 1846, + 1880, 1921, 1966, 2007, 2030, 2033, 2009, 1959, + 1893, 1818, 1749, 1706, 1681, 1674, 1689, 1707, + 1726, 1736, 1732, 1724, 1711, 1701, 1702, 1719, + 1750, 1792, 1844, 1893, 1928, 1950, 1957, 1952, + 1938, 1923, 1907, 1889, 1877, 1865, 1862, 1864, + 1867, 1866, 1850, 1822, 1803, 1810, 1830, 1855, + 1887, 1930, 1989, 2050, 2084, 2070, 2027, 1966, + 1895, 1822, 1755, 1707, 1691, 1694, 1722, 1770, + 1814, 1842, 1859, 1856, 1841, 1830, 1820, 1814, + 1803, 1791, 1782, 1769, 1750, 1730, 1705, 1676, + 1653, 1648, 1652, 1649, 1649, 1652, 1651, 1647, + 1635, 1625, 1628, 1632, 1641, 1667, 1695, 1713, + 1724, 1715, 1695, 1674, 1649, 1621, 1594, 1576, + 1580, 1597, 1617, 1645, 1685, 1719, 1738, 1755, + 1776, 1797, 1812, 1810, 1801, 1798, 1806, 1810, + 1805, 1790, 1780, 1790, 1806, 1817, 1832, 1843, + 1868, 1901, 1919, 1932, 1942, 1950, 1961, 1968, + 1973, 1983, 1991, 1993, 1994, 1993, 1983, 1976, + 1976, 1979, 1987, 2000, 2010, 2033, 2072, 2108, + 2148, 2196, 2244, 2299, 2353, 2397, 2440, 2468, + 2478, 2473, 2451, 2426, 2426, 2449, 2477, 2503, + 2537, 2609, 2715, 2815, 2883, 2932, 2965, 2970, + 2953, 2930, 2929, 2967, 3017, 3056, 3089, 3121, + 3185, 3277, 3343, 3378, 3378, 3376, 3385, 3349, + 3291, 3264, 3246, 3209, 3174, 3163, 3193, 3258, + 3315, 3361, 3385, 3377, 3372, 3372, 3338, 3251, + 3163, 3068, 2932, 2807, 2675, 2534, 2433, 2362, + 2322, 2314, 2331, 2364, 2376, 2350, 2292, 2214, + 2120, 2012, 1907, 1840, 1802, 1771, 1764, 1746, + 1706, 1661, 1587, 1504, 1444, 1419, 1420, 1455, + 1516, 1579, 1640, 1699, 1727, 1725, 1703, 1664, + 1628, 1624, 1655, 1699, 1741, 1783, 1822, 1836, + 1818, 1792, 1780, 1799, 1857, 1940, 2039, 2144, + 2251, 2331, 2360, 2349, 2315, 2264, 2199, 2150, + 2137, 2145, 2177, 2222, 2254, 2275, 2288, 2285, + 2271, 2257, 2249, 2257, 2272, 2281, 2286, 2269, + 2227, 2166, 2100, 2037, 1978, 1938, 1924, 1930, + 1954, 1988, 2010, 2017, 2007, 1985, 1947, 1910, + 1885, 1872, 1877, 1884, 1894, 1899, 1897, 1885, + 1866, 1840, 1814, 1807, 1810, 1823, 1842, 1870, + 1901, 1926, 1941, 1952, 1960, 1968, 1977, 1987, + 2003, 2022, 2040, 2058, 2069, 2068, 2065, 2062, + 2061, 2068, 2082, 2107, 2141, 2176, 2213, 2243, + 2261, 2262, 2234, 2179, 2126, 2097, 2086, 2073, + 2058, 2058, 2082, 2107, 2107, 2088, 2059, 2022, + 1981, 1951, 1924, 1896, 1875, 1861, 1863, 1873, + 1875, 1868, 1861, 1852, 1834, 1817, 1803, 1788, + 1766, 1729, 1687, 1655, 1637, 1615, 1587, 1579, + 1605, 1641, 1678, 1710, 1739, 1767, 1773, 1767, + 1752, 1738, 1706, 1677, 1654, 1649, 1664, 1682, + 1694, 1707, 1738, 1773, 1797, 1815, 1836, 1858, + 1880, 1882, 1877, 1879, 1877, 1869, 1852, 1843, + 1840, 1840, 1844, 1852, 1862, 1872, 1883, 1890, + 1894, 1892, 1896, 1906, 1916, 1923, 1931, 1937, + 1941, 1948, 1950, 1941, 1932, 1931, 1928, 1921, + 1916, 1910, 1905, 1913, 1931, 1961, 1990, 2008, + 2024, 2042, 2056, 2063, 2043, 2011, 1982, 1956, + 1936, 1927, 1932, 1950, 1979, 2012, 2046, 2082, + 2113, 2128, 2137, 2142, 2148, 2161, 2180, 2196, + 2213, 2248, 2299, 2350, 2405, 2460, 2499, 2530, + 2546, 2550, 2556, 2556, 2547, 2548, 2577, 2640, + 2720, 2786, 2846, 2921, 3004, 3063, 3069, 3056, + 3055, 3065, 3067, 3060, 3049, 3054, 3077, 3103, + 3126, 3137, 3145, 3161, 3187, 3206, 3211, 3231, + 3246, 3242, 3228, 3203, 3182, 3176, 3157, 3118, + 3075, 3031, 3006, 2990, 2952, 2903, 2849, 2812, + 2790, 2763, 2745, 2712, 2653, 2579, 2502, 2404, + 2267, 2098, 1929, 1827, 1771, 1732, 1734, 1804, + 1919, 2028, 2098, 2107, 2069, 1992, 1851, 1667, + 1499, 1371, 1291, 1254, 1250, 1289, 1363, 1435, + 1495, 1544, 1583, 1627, 1676, 1733, 1789, 1827, + 1845, 1849, 1833, 1798, 1746, 1692, 1667, 1686, + 1750, 1843, 1955, 2066, 2162, 2232, 2266, 2261, + 2230, 2198, 2180, 2188, 2219, 2271, 2335, 2398, + 2437, 2442, 2422, 2386, 2341, 2290, 2242, 2209, + 2207, 2215, 2226, 2232, 2230, 2232, 2228, 2219, + 2214, 2219, 2226, 2229, 2216, 2188, 2141, 2071, + 1991, 1905, 1834, 1782, 1761, 1775, 1819, 1878, + 1938, 1990, 2025, 2038, 2028, 2001, 1958, 1917, + 1876, 1841, 1811, 1792, 1783, 1781, 1782, 1793, + 1813, 1841, 1874, 1912, 1946, 1977, 1996, 2002, + 2000, 1987, 1971, 1955, 1947, 1952, 1966, 1985, + 2007, 2032, 2052, 2065, 2076, 2081, 2080, 2083, + 2090, 2103, 2120, 2139, 2159, 2181, 2201, 2211, + 2215, 2214, 2204, 2192, 2175, 2156, 2135, 2117, + 2102, 2086, 2077, 2075, 2081, 2084, 2078, 2081, + 2093, 2099, 2076, 2020, 1937, 1824, 1714, 1648, + 1607, 1576, 1560, 1579, 1647, 1740, 1800, 1814, + 1801, 1770, 1725, 1675, 1627, 1576, 1531, 1481, + 1439, 1424, 1430, 1437, 1449, 1470, 1511, 1561, + 1622, 1687, 1744, 1780, 1781, 1758, 1726, 1704, + 1679, 1638, 1611, 1619, 1643, 1675, 1713, 1751, + 1786, 1810, 1824, 1833, 1846, 1858, 1865, 1864, + 1862, 1858, 1856, 1856, 1859, 1858, 1851, 1842, + 1840, 1843, 1843, 1842, 1842, 1845, 1838, 1830, + 1827, 1836, 1849, 1863, 1877, 1888, 1902, 1916, + 1915, 1893, 1865, 1837, 1810, 1797, 1799, 1806, + 1817, 1834, 1864, 1897, 1929, 1960, 1981, 2007, + 2031, 2035, 2034, 2028, 2019, 2006, 1982, 1964, + 1965, 1983, 2006, 2033, 2067, 2104, 2144, 2179, + 2199, 2203, 2195, 2192, 2185, 2176, 2171, 2173, + 2194, 2222, 2244, 2259, 2284, 2315, 2342, 2376, + 2405, 2415, 2426, 2436, 2443, 2460, 2474, 2481, + 2488, 2505, 2544, 2598, 2652, 2706, 2760, 2798, + 2814, 2836, 2865, 2865, 2833, 2807, 2795, 2803, + 2827, 2847, 2877, 2928, 2958, 2979, 3006, 3042, + 3081, 3090, 3065, 3050, 3061, 3071, 3063, 3036, + 3006, 2987, 2962, 2932, 2920, 2919, 2895, 2866, + 2855, 2855, 2853, 2828, 2756, 2623, 2409, 2184, + 2063, 1996, 1882, 1807, 1871, 2060, 2301, 2485, + 2555, 2552, 2477, 2278, 1995, 1698, 1429, 1241, + 1139, 1114, 1204, 1368, 1522, 1640, 1719, 1756, + 1761, 1742, 1745, 1784, 1820, 1830, 1820, 1789, + 1722, 1606, 1446, 1308, 1235, 1253, 1354, 1533, + 1763, 1996, 2199, 2322, 2338, 2264, 2138, 2010, + 1902, 1827, 1805, 1859, 1970, 2091, 2185, 2220, + 2213, 2189, 2150, 2102, 2083, 2113, 2184, 2253, + 2304, 2335, 2342, 2316, 2258, 2188, 2128, 2099, + 2117, 2163, 2209, 2240, 2237, 2199, 2137, 2062, + 1982, 1911, 1879, 1900, 1971, 2061, 2149, 2224, + 2266, 2259, 2213, 2139, 2046, 1958, 1890, 1844, + 1823, 1821, 1826, 1839, 1859, 1879, 1897, 1923, + 1966, 2014, 2061, 2091, 2106, 2103, 2069, 2004, + 1927, 1856, 1808, 1787, 1785, 1809, 1867, 1943, + 2022, 2090, 2145, 2185, 2208, 2215, 2211, 2201, + 2186, 2172, 2156, 2140, 2126, 2120, 2121, 2132, + 2154, 2184, 2218, 2253, 2282, 2309, 2320, 2319, + 2308, 2289, 2271, 2258, 2243, 2230, 2231, 2233, + 2225, 2217, 2211, 2196, 2178, 2162, 2141, 2114, + 2090, 2078, 2077, 2063, 2049, 2059, 2070, 2077, + 2073, 2050, 2013, 1985, 1942, 1879, 1823, 1787, + 1762, 1756, 1764, 1774, 1792, 1795, 1793, 1805, + 1809, 1801, 1789, 1770, 1752, 1739, 1712, 1678, + 1656, 1643, 1633, 1629, 1646, 1681, 1722, 1753, + 1776, 1804, 1824, 1830, 1822, 1805, 1784, 1763, + 1740, 1727, 1731, 1745, 1762, 1776, 1805, 1843, + 1870, 1883, 1901, 1915, 1917, 1915, 1908, 1901, + 1899, 1893, 1873, 1862, 1859, 1864, 1870, 1877, + 1892, 1910, 1927, 1939, 1945, 1944, 1940, 1938, + 1932, 1922, 1911, 1904, 1908, 1915, 1919, 1923, + 1931, 1939, 1944, 1947, 1953, 1964, 1973, 1977, + 1986, 2006, 2027, 2033, 2031, 2040, 2061, 2078, + 2085, 2087, 2099, 2114, 2124, 2130, 2140, 2153, + 2165, 2178, 2196, 2223, 2250, 2268, 2279, 2292, + 2310, 2333, 2344, 2344, 2344, 2346, 2347, 2352, + 2350, 2345, 2346, 2361, 2383, 2408, 2426, 2436, + 2455, 2474, 2476, 2473, 2484, 2485, 2479, 2479, + 2477, 2470, 2467, 2461, 2456, 2464, 2470, 2482, + 2504, 2522, 2537, 2556, 2561, 2556, 2547, 2534, + 2522, 2509, 2485, 2473, 2487, 2502, 2512, 2513, + 2527, 2553, 2558, 2535, 2528, 2544, 2556, 2542, + 2518, 2513, 2521, 2527, 2520, 2500, 2497, 2511, + 2517, 2501, 2467, 2427, 2396, 2367, 2310, 2253, + 2226, 2226, 2250, 2280, 2302, 2331, 2358, 2366, + 2357, 2320, 2263, 2197, 2131, 2069, 2016, 1979, + 1949, 1933, 1934, 1943, 1951, 1964, 1982, 2007, + 2036, 2056, 2066, 2068, 2057, 2030, 1980, 1911, + 1844, 1795, 1766, 1751, 1754, 1781, 1832, 1887, + 1936, 1974, 2007, 2027, 2032, 2025, 2006, 1989, + 1976, 1963, 1948, 1934, 1918, 1915, 1914, 1919, + 1931, 1953, 1990, 2033, 2069, 2096, 2117, 2127, + 2125, 2111, 2084, 2056, 2040, 2029, 2023, 2025, + 2032, 2038, 2046, 2057, 2067, 2073, 2077, 2083, + 2095, 2107, 2113, 2121, 2123, 2122, 2121, 2117, + 2109, 2102, 2101, 2100, 2102, 2104, 2103, 2104, + 2104, 2101, 2096, 2093, 2091, 2093, 2100, 2108, + 2121, 2134, 2141, 2137, 2130, 2118, 2103, 2085, + 2068, 2055, 2047, 2042, 2046, 2052, 2059, 2069, + 2080, 2094, 2103, 2113, 2120, 2120, 2119, 2110, + 2098, 2084, 2072, 2058, 2047, 2040, 2039, 2044, + 2064, 2075, 2086, 2092, 2089, 2095, 2104, 2112, + 2113, 2104, 2082, 2056, 2033, 2026, 2027, 2025, + 2025, 2023, 2018, 2018, 2010, 1989, 1975, 1966, + 1946, 1919, 1910, 1920, 1932, 1939, 1939, 1939, + 1943, 1925, 1878, 1815, 1771, 1740, 1694, 1656, + 1659, 1689, 1722, 1751, 1766, 1779, 1792, 1791, + 1778, 1756, 1730, 1697, 1667, 1642, 1629, 1615, + 1589, 1580, 1583, 1593, 1621, 1656, 1696, 1743, + 1775, 1796, 1810, 1810, 1797, 1762, 1719, 1681, + 1649, 1632, 1627, 1640, 1670, 1702, 1741, 1785, + 1821, 1848, 1865, 1875, 1882, 1877, 1856, 1835, + 1815, 1796, 1775, 1749, 1738, 1742, 1756, 1774, + 1799, 1834, 1869, 1896, 1916, 1931, 1929, 1918, + 1905, 1888, 1869, 1852, 1842, 1849, 1860, 1872, + 1889, 1910, 1933, 1954, 1974, 1990, 2007, 2021, + 2029, 2028, 2034, 2041, 2042, 2045, 2058, 2072, + 2082, 2092, 2113, 2137, 2156, 2171, 2183, 2201, + 2225, 2242, 2248, 2260, 2279, 2300, 2322, 2337, + 2350, 2369, 2385, 2396, 2395, 2397, 2412, 2430, + 2446, 2459, 2471, 2493, 2516, 2539, 2555, 2570, + 2589, 2606, 2626, 2650, 2658, 2659, 2672, 2697, + 2709, 2714, 2721, 2737, 2762, 2772, 2768, 2775, + 2799, 2820, 2818, 2803, 2790, 2789, 2780, 2753, + 2717, 2681, 2647, 2577, 2477, 2416, 2401, 2371, + 2325, 2324, 2389, 2484, 2552, 2565, 2540, 2494, + 2418, 2288, 2121, 1974, 1863, 1782, 1728, 1721, + 1757, 1808, 1862, 1900, 1913, 1916, 1922, 1923, + 1922, 1918, 1907, 1895, 1866, 1812, 1734, 1642, + 1550, 1471, 1429, 1439, 1501, 1606, 1729, 1852, + 1956, 2028, 2050, 2026, 1979, 1920, 1854, 1789, + 1754, 1754, 1777, 1803, 1819, 1830, 1846, 1863, + 1880, 1905, 1951, 2014, 2077, 2127, 2174, 2199, + 2191, 2146, 2082, 2012, 1948, 1913, 1908, 1928, + 1967, 2013, 2062, 2107, 2139, 2153, 2149, 2143, + 2144, 2152, 2162, 2179, 2203, 2220, 2218, 2197, + 2166, 2128, 2089, 2058, 2039, 2040, 2058, 2085, + 2114, 2144, 2169, 2176, 2163, 2141, 2124, 2113, + 2099, 2085, 2077, 2071, 2061, 2044, 2021, 1995, + 1970, 1945, 1927, 1926, 1942, 1970, 2004, 2038, + 2065, 2087, 2093, 2090, 2081, 2063, 2039, 2018, + 2001, 1994, 1993, 1996, 2001, 2009, 2017, 2026, + 2039, 2057, 2080, 2107, 2130, 2151, 2170, 2180, + 2182, 2172, 2152, 2128, 2104, 2084, 2072, 2073, + 2079, 2094, 2116, 2139, 2159, 2174, 2187, 2194, + 2195, 2190, 2186, 2185, 2182, 2172, 2161, 2153, + 2139, 2125, 2116, 2109, 2103, 2101, 2104, 2118, + 2141, 2162, 2177, 2188, 2189, 2185, 2173, 2158, + 2145, 2129, 2114, 2099, 2091, 2085, 2077, 2070, + 2065, 2058, 2056, 2052, 2051, 2062, 2071, 2077, + 2080, 2079, 2072, 2059, 2042, 2019, 1997, 1981, + 1970, 1959, 1958, 1961, 1970, 1976, 1976, 1977, + 1979, 1976, 1974, 1969, 1960, 1954, 1952, 1951, + 1949, 1948, 1941, 1937, 1933, 1927, 1923, 1923, + 1927, 1930, 1931, 1932, 1920, 1892, 1884, 1894, + 1895, 1884, 1871, 1875, 1890, 1907, 1909, 1885, + 1865, 1864, 1874, 1884, 1883, 1878, 1870, 1865, + 1858, 1846, 1829, 1823, 1829, 1832, 1834, 1849, + 1874, 1902, 1917, 1920, 1920, 1929, 1941, 1948, + 1947, 1938, 1939, 1946, 1950, 1954, 1960, 1971, + 1979, 1989, 1998, 2011, 2026, 2046, 2066, 2079, + 2083, 2080, 2083, 2086, 2086, 2076, 2060, 2049, + 2052, 2060, 2067, 2076, 2081, 2089, 2101, 2114, + 2124, 2128, 2128, 2129, 2126, 2125, 2127, 2126, + 2121, 2117, 2109, 2098, 2093, 2096, 2109, 2119, + 2123, 2130, 2141, 2159, 2170, 2172, 2169, 2168, + 2175, 2172, 2163, 2165, 2168, 2170, 2170, 2169, + 2169, 2177, 2185, 2189, 2182, 2186, 2193, 2199, + 2206, 2218, 2224, 2217, 2215, 2212, 2209, 2205, + 2202, 2198, 2193, 2193, 2200, 2207, 2208, 2205, + 2208, 2208, 2205, 2207, 2209, 2208, 2208, 2212, + 2215, 2224, 2234, 2239, 2242, 2240, 2240, 2243, + 2239, 2233, 2238, 2245, 2241, 2242, 2243, 2243, + 2244, 2242, 2241, 2242, 2247, 2253, 2257, 2260, + 2268, 2274, 2271, 2262, 2258, 2256, 2252, 2244, + 2231, 2226, 2225, 2224, 2222, 2218, 2214, 2211, + 2208, 2209, 2212, 2213, 2215, 2218, 2220, 2220, + 2216, 2208, 2199, 2191, 2178, 2165, 2151, 2144, + 2140, 2137, 2131, 2127, 2128, 2127, 2123, 2118, + 2111, 2108, 2101, 2093, 2086, 2080, 2071, 2063, + 2052, 2039, 2028, 2016, 2007, 1998, 1990, 1987, + 1985, 1987, 1990, 1992, 1995, 1995, 1992, 1986, + 1979, 1973, 1966, 1955, 1945, 1938, 1929, 1926, + 1922, 1919, 1918, 1923, 1925, 1929, 1936, 1942, + 1944, 1946, 1947, 1945, 1942, 1937, 1934, 1930, + 1925, 1923, 1924, 1928, 1932, 1938, 1944, 1950, + 1959, 1969, 1974, 1979, 1984, 1985, 1983, 1983, + 1983, 1981, 1980, 1975, 1975, 1972, 1976, 1981, + 1983, 1986, 1987, 1989, 1990, 1990, 1992, 1993, + 1992, 1996, 1998, 1998, 1995, 1994, 1993, 1991, + 1988, 1982, 1977, 1973, 1970, 1968, 1965, 1963, + 1966, 1968, 1969, 1971, 1974, 1979, 1984, 1985, + 1987, 1988, 1985, 1979, 1973, 1965, 1957, 1954, + 1950, 1947, 1948, 1948, 1952, 1959, 1966, 1974, + 1980, 1986, 1990, 1992, 1993, 1994, 1992, 1987, + 1979, 1975, 1976, 1977, 1973, 1973, 1977, 1986, + 1995, 2004, 2008, 2018, 2026, 2025, 2026, 2024, + 2021, 2019, 2013, 2009, 2006, 2005, 2007, 2007, + 2011, 2018, 2028, 2038, 2047, 2056, 2063, 2074, + 2083, 2087, 2087, 2089, 2090, 2087, 2086, 2085, + 2090, 2094, 2094, 2105, 2118, 2127, 2131, 2136, + 2145, 2153, 2156, 2155, 2150, 2152, 2156, 2158, + 2155, 2154, 2158, 2165, 2167, 2165, 2166, 2170, + 2177, 2184, 2185, 2190, 2195, 2199, 2202, 2200, + 2198, 2197, 2199, 2199, 2196, 2193, 2197, 2202, + 2203, 2203, 2206, 2208, 2208, 2209, 2210, 2210, + 2210, 2212, 2213, 2214, 2214, 2215, 2215, 2214, + 2216, 2217, 2212, 2208, 2212, 2214, 2213, 2215, + 2216, 2222, 2226, 2226, 2229, 2225, 2221, 2224, + 2222, 2215, 2208, 2203, 2196, 2192, 2184, 2175, + 2170, 2165, 2163, 2159, 2154, 2150, 2146, 2142, + 2138, 2137, 2133, 2130, 2126, 2124, 2121, 2113, + 2104, 2094, 2087, 2081, 2075, 2064, 2058, 2054, + 2052, 2049, 2045, 2044, 2042, 2039, 2038, 2032, + 2028, 2025, 2022, 2020, 2015, 2008, 1999, 1993, + 1988, 1982, 1974, 1970, 1972, 1972, 1975, 1977, + 1977, 1980, 1980, 1976, 1973, 1973, 1970, 1966, + 1962, 1961, 1957, 1955, 1954, 1955, 1956, 1956, + 1958, 1961, 1969, 1975, 1978, 1981, 1983, 1984, + 1988, 1985, 1982, 1981, 1980, 1980, 1982, 1985, + 1990, 1997, 2003, 2010, 2015, 2021, 2027, 2030, + 2033, 2035, 2036, 2039, 2042, 2044, 2045, 2049, + 2050, 2050, 2052, 2055, 2056, 2058, 2061, 2066, + 2070, 2069, 2073, 2074, 2076, 2079, 2081, 2079, + 2077, 2076, 2074, 2075, 2074, 2072, 2070, 2070, + 2070, 2069, 2066, 2064, 2062, 2063, 2060, 2059, + 2060, 2061, 2061, 2057, 2055, 2053, 2049, 2043, + 2036, 2027, 2021, 2012, 2010, 1999, 1994, 1992, + 1987, 1980, 1972, 1973, 1972, 1968, 1965, 1965, + 1966, 1967, 1963, 1958, 1954, 1947, 1945, 1940, + 1935, 1933, 1930, 1929, 1931, 1933, 1933, 1933, + 1933, 1934, 1935, 1936, 1934, 1932, 1934, 1934, + 1933, 1935, 1933, 1932, 1934, 1933, 1930, 1928, + 1931, 1930, 1931, 1932, 1931, 1934, 1932, 1932, + 1932, 1934, 1937, 1936, 1937, 1940, 1943, 1942, + 1946, 1945, 1944, 1944, 1942, 1944, 1946, 1948, + 1947, 1949, 1953, 1956, 1958, 1961, 1964, 1968, + 1970, 1971, 1975, 1976, 1979, 1981, 1982, 1985, + 1988, 1990, 1992, 1997, 2002, 2009, 2013, 2018, + 2027, 2033, 2039, 2042, 2049, 2054, 2061, 2062, + 2062, 2066, 2069, 2076, 2080, 2084, 2089, 2094, + 2099, 2105, 2110, 2114, 2120, 2125, 2130, 2137, + 2141, 2146, 2152, 2159, 2164, 2168, 2172, 2177, + 2182, 2186, 2187, 2192, 2197, 2201, 2205, 2210, + 2218, 2220, 2224, 2228, 2232, 2238, 2243, 2246, + 2249, 2252, 2250, 2248, 2248, 2246, 2249, 2250, + 2252, 2252, 2252, 2258, 2262, 2264, 2268, 2271, + 2272, 2274, 2271, 2269, 2268, 2268, 2264, 2262, + 2261, 2261, 2255, 2251, 2249, 2248, 2248, 2243, + 2241, 2244, 2246, 2249, 2248, 2247, 2246, 2246, + 2245, 2240, 2238, 2237, 2241, 2240, 2240, 2239, + 2240, 2240, 2238, 2236, 2234, 2233, 2230, 2226, + 2222, 2222, 2219, 2215, 2213, 2209, 2204, 2201, + 2193, 2185, 2182, 2175, 2169, 2164, 2161, 2154, + 2150, 2143, 2134, 2132, 2127, 2122, 2114, 2109, + 2104, 2097, 2092, 2085, 2077, 2068, 2060, 2054, + 2049, 2045, 2039, 2035, 2033, 2033, 2031, 2029, + 2027, 2023, 2023, 2018, 2015, 2013, 2010, 2008, + 2008, 2005, 2001, 2002, 1997, 1996, 1993, 1991, + 1991, 1995, 1996, 1996, 1997, 1998, 1999, 1999, + 1995, 1994, 1998, 1996, 1996, 1997, 1999, 2001, + 2002, 2006, 2009, 2011, 2012, 2015, 2017, 2020, + 2023, 2031, 2035, 2039, 2041, 2042, 2047, 2049, + 2048, 2049, 2052, 2056, 2058, 2060, 2064, 2068, + 2071, 2073, 2071, 2073, 2077, 2079, 2077, 2078, + 2077, 2077, 2076, 2073, 2073, 2071, 2069, 2068, + 2069, 2066, 2068, 2070, 2069, 2070, 2068, 2070, + 2067, 2067, 2064, 2062, 2059, 2056, 2050, 2048, + 2047, 2044, 2041, 2040, 2038, 2038, 2036, 2036, + 2035, 2035, 2035, 2033, 2035, 2032, 2030, 2027, + 2024, 2019, 2015, 2014, 2013, 2011, 2011, 2011, + 2011, 2010, 2012, 2012, 2009, 2009, 2005, 2004, + 2002, 1997, 1995, 1991, 1990, 1989, 1985, 1983, + 1982, 1982, 1980, 1978, 1978, 1980, 1980, 1980, + 1984, 1986, 1984, 1984, 1986, 1987, 1987, 1986, + 1987, 1986, 1987, 1988, 1989, 1989, 1987, 1990, + 1992, 1996, 1998, 2002, 2007, 2011, 2015, 2018, + 2021, 2026, 2028, 2028, 2028, 2026, 2026, 2025, + 2024, 2024, 2024, 2025, 2027, 2033, 2033, 2034, + 2038, 2040, 2043, 2041, 2044, 2043, 2042, 2040, + 2036, 2036, 2038, 2040, 2043, 2044, 2045, 2048, + 2049, 2055, 2058, 2059, 2061, 2064, 2064, 2064, + 2064, 2064, 2063, 2064, 2064, 2064, 2065, 2066, + 2067, 2070, 2074, 2076, 2078, 2077, 2079, 2074, + 2075, 2074, 2071, 2073, 2073, 2074, 2075, 2077, + 2079, 2079, 2080, 2080, 2079, 2083, 2087, 2091, + 2093, 2093, 2097, 2098, 2100, 2105, 2108, 2107, + 2109, 2111, 2112, 2116, 2119, 2121, 2123, 2126, + 2131, 2134, 2138, 2140, 2143, 2144, 2148, 2149, + 2151, 2152, 2152, 2154, 2152, 2155, 2156, 2157, + 2158, 2162, 2165, 2165, 2167, 2169, 2171, 2170, + 2173, 2171, 2172, 2174, 2174, 2171, 2168, 2169, + 2168, 2163, 2162, 2164, 2166, 2167, 2169, 2165, + 2167, 2166, 2165, 2165, 2165, 2162, 2160, 2160, + 2159, 2156, 2153, 2152, 2152, 2146, 2143, 2141, + 2139, 2136, 2133, 2129, 2125, 2120, 2114, 2111, + 2108, 2103, 2100, 2092, 2091, 2091, 2087, 2080, + 2076, 2076, 2073, 2068, 2065, 2061, 2056, 2053, + 2050, 2044, 2039, 2036, 2032, 2028, 2024, 2024, + 2021, 2018, 2017, 2017, 2013, 2007, 2006, 2001, + 1996, 1997, 1992, 1990, 1988, 1982, 1979, 1977, + 1973, 1970, 1967, 1965, 1963, 1961, 1960, 1958, + 1954, 1955, 1951, 1949, 1947, 1941, 1937, 1935, + 1935, 1934, 1934, 1931, 1933, 1935, 1936, 1936, + 1936, 1937, 1939, 1939, 1942, 1943, 1946, 1945, + 1944, 1945, 1946, 1948, 1949, 1950, 1952, 1949, + 1948, 1948, 1947, 1946, 1946, 1949, 1949, 1949, + 1952, 1954, 1956, 1955, 1953, 1954, 1954, 1955, + 1957, 1953, 1952, 1950, 1948, 1948, 1948, 1948, + 1947, 1949, 1949, 1947, 1946, 1948, 1951, 1950, + 1951, 1953, 1953, 1952, 1955, 1955, 1953, 1951, + 1952, 1953, 1951, 1950, 1950, 1953, 1954, 1953, + 1954, 1951, 1952, 1953, 1953, 1952, 1953, 1954, + 1956, 1955, 1954, 1955, 1953, 1953, 1953, 1951, + 1951, 1951, 1950, 1954, 1955, 1956, 1956, 1957, + 1956, 1961, 1964, 1965, 1969, 1970, 1974, 1978, + 1980, 1981, 1981, 1983, 1983, 1986, 1987, 1992, + 1997, 2000, 2002, 2006, 2011, 2016, 2020, 2027, + 2031, 2033, 2039, 2044, 2046, 2049, 2053, 2058, + 2059, 2060, 2061, 2064, 2067, 2072, 2077, 2081, + 2086, 2090, 2096, 2100, 2102, 2104, 2108, 2111, + 2115, 2115, 2116, 2118, 2120, 2119, 2119, 2119, + 2118, 2119, 2119, 2120, 2120, 2120, 2124, 2128, + 2127, 2127, 2127, 2127, 2129, 2127, 2125, 2124, + 2124, 2125, 2124, 2125, 2123, 2122, 2123, 2122, + 2121, 2122, 2125, 2128, 2129, 2132, 2134, 2133, + 2134, 2136, 2135, 2137, 2136, 2134, 2137, 2137, + 2138, 2139, 2137, 2134, 2139, 2139, 2141, 2142, + 2145, 2150, 2152, 2154, 2156, 2159, 2159, 2160, + 2160, 2159, 2160, 2160, 2159, 2160, 2163, 2166, + 2166, 2166, 2165, 2166, 2168, 2169, 2171, 2174, + 2178, 2176, 2176, 2176, 2177, 2177, 2176, 2174, + 2174, 2177, 2181, 2181, 2182, 2183, 2186, 2188, + 2189, 2191, 2190, 2191, 2188, 2186, 2186, 2185, + 2183, 2185, 2186, 2184, 2183, 2183, 2182, 2183, + 2180, 2180, 2177, 2175, 2175, 2172, 2168, 2165, + 2165, 2165, 2163, 2162, 2162, 2158, 2158, 2154, + 2150, 2146, 2143, 2138, 2139, 2134, 2130, 2124, + 2122, 2117, 2116, 2109, 2104, 2099, 2097, 2089, + 2084, 2079, 2072, 2068, 2064, 2061, 2055, 2048, + 2043, 2041, 2034, 2032, 2028, 2022, 2019, 2012, + 2008, 2005, 2001, 1996, 1991, 1989, 1988, 1985, + 1982, 1978, 1974, 1972, 1970, 1967, 1964, 1960, + 1961, 1959, 1955, 1952, 1951, 1949, 1949, 1947, + 1944, 1945, 1944, 1944, 1942, 1941, 1940, 1937, + 1934, 1931, 1932, 1931, 1931, 1932, 1932, 1930, + 1929, 1927, 1926, 1926, 1928, 1931, 1933, 1935, + 1935, 1935, 1937, 1938, 1940, 1941, 1937, 1938, + 1940, 1940, 1942, 1942, 1943, 1945, 1947, 1948, + 1950, 1954, 1953, 1955, 1957, 1959, 1961, 1965, + 1965, 1965, 1966, 1968, 1971, 1971, 1972, 1972, + 1974, 1975, 1975, 1978, 1980, 1980, 1982, 1983, + 1983, 1984, 1986, 1988, 1992, 1993, 1994, 1997, + 1996, 1994, 1994, 1998, 1999, 2002, 2004, 2007, + 2009, 2010, 2012, 2013, 2017, 2020, 2022, 2024, + 2027, 2027, 2030, 2034, 2037, 2039, 2041, 2045, + 2049, 2050, 2052, 2055, 2055, 2057, 2060, 2062, + 2067, 2072, 2075, 2077, 2078, 2082, 2085, 2089, + 2090, 2094, 2095, 2098, 2099, 2103, 2107, 2108, + 2111, 2113, 2115, 2115, 2117, 2116, 2117, 2118, + 2120, 2121, 2124, 2125, 2126, 2126, 2127, 2129, + 2129, 2129, 2129, 2131, 2129, 2129, 2129, 2128, + 2128, 2126, 2127, 2127, 2128, 2128, 2126, 2126, + 2125, 2126, 2125, 2124, 2121, 2120, 2119, 2118, + 2118, 2118, 2116, 2114, 2114, 2116, 2115, 2115, + 2111, 2110, 2110, 2110, 2107, 2108, 2108, 2106, + 2109, 2109, 2110, 2110, 2109, 2108, 2107, 2103, + 2102, 2102, 2102, 2101, 2099, 2101, 2098, 2096, + 2093, 2093, 2094, 2093, 2094, 2095, 2095, 2097, + 2094, 2090, 2091, 2088, 2084, 2083, 2083, 2082, + 2079, 2076, 2076, 2076, 2076, 2073, 2073, 2071, + 2068, 2069, 2068, 2066, 2063, 2063, 2063, 2065, + 2064, 2063, 2062, 2063, 2065, 2065, 2068, 2068, + 2066, 2068, 2066, 2062, 2064, 2067, 2063, 2063, + 2063, 2063, 2064, 2061, 2060, 2062, 2061, 2061, + 2059, 2061, 2060, 2057, 2059, 2059, 2058, 2058, + 2055, 2053, 2054, 2052, 2047, 2044, 2041, 2042, + 2040, 2041, 2041, 2042, 2039, 2039, 2040, 2042, + 2042, 2040, 2040, 2036, 2036, 2037, 2035, 2034, + 2034, 2032, 2031, 2028, 2027, 2026, 2023, 2025, + 2026, 2028, 2027, 2027, 2028, 2026, 2026, 2027, + 2025, 2022, 2019, 2016, 2011, 2010, 2008, 2008, + 2004, 2001, 1999, 1998, 1996, 1997, 1994, 1992, + 1993, 1990, 1989, 1985, 1984, 1983, 1980, 1979, + 1975, 1970, 1969, 1971, 1970, 1969, 1969, 1969, + 1970, 1971, 1973, 1975, 1974, 1974, 1974, 1975, + 1972, 1974, 1974, 1974, 1976, 1972, 1973, 1973, + 1973, 1973, 1969, 1972, 1972, 1977, 1981, 1984, + 1987, 1989, 1989, 1990, 1991, 1991, 1990, 1991, + 1989, 1987, 1985, 1988, 1987, 1986, 1987, 1988, + 1989, 1988, 1992, 1993, 1992, 1994, 1995, 1995, + 1994, 1993, 1991, 1994, 1992, 1990, 1992, 1990, + 1994, 1994, 1997, 1997, 1999, 2001, 2002, 2003, + 2003, 2003, 2005, 2003, 2000, 2000, 2001, 2003, + 2004, 2004, 2002, 2002, 2003, 2002, 2002, 2002, + 2003, 2002, 2001, 2005, 2003, 2001, 2001, 2003, + 2002, 2001, 2001, 2000, 2002, 2000, 2002, 2002, + 2002, 2003, 2002, 2005, 2004, 2004, 2008, 2007, + 2008, 2010, 2013, 2018, 2019, 2020, 2021, 2022, + 2023, 2023, 2024, 2024, 2022, 2022, 2023, 2025, + 2026, 2026, 2029, 2030, 2030, 2032, 2032, 2034, + 2032, 2033, 2031, 2033, 2035, 2036, 2037, 2037, + 2036, 2035, 2038, 2040, 2040, 2040, 2039, 2039, + 2040, 2041, 2040, 2040, 2039, 2041, 2040, 2039, + 2041, 2039, 2038, 2038, 2041, 2042, 2042, 2044, + 2042, 2042, 2040, 2042, 2044, 2043, 2043, 2045, + 2045, 2044, 2047, 2048, 2048, 2049, 2050, 2049, + 2051, 2052, 2053, 2056, 2055, 2055, 2056, 2056, + 2059, 2056, 2058, 2056, 2055, 2056, 2054, 2058, + 2059, 2059, 2059, 2058, 2057, 2058, 2056, 2056, + 2059, 2060, 2060, 2062, 2064, 2064, 2063, 2065, + 2065, 2066, 2064, 2065, 2067, 2064, 2064, 2064, + 2066, 2064, 2066, 2064, 2064, 2066, 2065, 2065, + 2064, 2064, 2063, 2064, 2063, 2063, 2064, 2063, + 2064, 2066, 2066, 2068, 2068, 2063, 2062, 2062, + 2063, 2065, 2065, 2063, 2062, 2064, 2064, 2067, + 2064, 2065, 2066, 2062, 2063, 2064, 2064, 2065, + 2066, 2064, 2066, 2069, 2069, 2070, 2070, 2070, + 2068, 2069, 2071, 2073, 2074, 2077, 2076, 2079, + 2080, 2082, 2082, 2083, 2083, 2082, 2082, 2081, + 2083, 2083, 2080, 2081, 2081, 2083, 2083, 2083, + 2083, 2080, 2081, 2084, 2085, 2084, 2085, 2085, + 2083, 2082, 2080, 2081, 2080, 2080, 2078, 2079, + 2077, 2076, 2076, 2076, 2078, 2076, 2077, 2078, + 2080, 2080, 2082, 2084, 2082, 2082, 2082, 2081, + 2082, 2082, 2083, 2083, 2084, 2085, 2086, 2086, + 2084, 2085, 2086, 2087, 2087, 2089, 2088, 2085, + 2086, 2089, 2088, 2087, 2086, 2086, 2086, 2090, + 2089, 2089, 2090, 2092, 2094, 2095, 2095, 2097, + 2098, 2099, 2100, 2099, 2101, 2104, 2102, 2101, + 2101, 2101, 2103, 2102, 2099, 2096, 2097, 2098, + 2097, 2097, 2099, 2099, 2100, 2100, 2102, 2105, + 2104, 2100, 2099, 2096, 2097, 2095, 2092, 2094, + 2092, 2089, 2089, 2088, 2088, 2085, 2085, 2083, + 2082, 2081, 2080, 2081, 2082, 2082, 2080, 2080, + 2080, 2079, 2080, 2078, 2076, 2074, 2073, 2073, + 2073, 2072, 2071, 2067, 2067, 2069, 2070, 2072, + 2074, 2077, 2078, 2078, 2080, 2078, 2076, 2076, + 2073, 2073, 2071, 2070, 2071, 2069, 2069, 2069, + 2069, 2068, 2069, 2069, 2068, 2068, 2068, 2069, + 2068, 2066, 2064, 2064, 2063, 2062, 2061, 2055, + 2058, 2059, 2057, 2056, 2055, 2058, 2057, 2055, + 2054, 2055, 2056, 2055, 2055, 2055, 2052, 2053, + 2055, 2054, 2055, 2052, 2051, 2051, 2050, 2049, + 2049, 2050, 2048, 2049, 2049, 2049, 2050, 2052, + 2052, 2052, 2052, 2053, 2054, 2057, 2057, 2058, + 2058, 2058, 2061, 2061, 2062, 2064, 2065, 2066, + 2068, 2067, 2070, 2071, 2073, 2075, 2075, 2076, + 2078, 2078, 2077, 2076, 2080, 2077, 2079, 2080, + 2081, 2079, 2076, 2075, 2074, 2077, 2075, 2071, + 2071, 2070, 2070, 2073, 2073, 2076, 2074, 2071, + 2072, 2072, 2071, 2072, 2069, 2066, 2064, 2062, + 2061, 2062, 2063, 2062, 2064, 2062, 2060, 2062, + 2062, 2061, 2061, 2060, 2056, 2057, 2057, 2055, + 2056, 2056, 2055, 2056, 2057, 2057, 2058, 2059, + 2060, 2059, 2062, 2065, 2067, 2068, 2067, 2067, + 2067, 2066, 2066, 2065, 2063, 2060, 2064, 2067, + 2067, 2065, 2063, 2062, 2063, 2063, 2061, 2061, + 2060, 2060, 2059, 2059, 2061, 2060, 2064, 2064, + 2063, 2062, 2061, 2061, 2060, 2060, 2059, 2057, + 2056, 2055, 2056, 2058, 2058, 2060, 2058, 2060, + 2060, 2057, 2056, 2055, 2055, 2054, 2052, 2051, + 2052, 2048, 2048, 2050, 2051, 2046, 2044, 2043, + 2045, 2045, 2042, 2044, 2044, 2045, 2046, 2048, + 2047, 2049, 2045, 2043, 2042, 2042, 2040, 2039, + 2040, 2039, 2042, 2041, 2042, 2044, 2043, 2041, + 2040, 2039, 2036, 2038, 2039, 2040, 2042, 2043, + 2042, 2042, 2043, 2043, 2042, 2042, 2041, 2042, + 2041, 2044, 2044, 2041, 2042, 2043, 2040, 2041, + 2040, 2038, 2038, 2036, 2034, 2034, 2035, 2032, + 2032, 2031, 2032, 2031, 2029, 2030, 2029, 2029, + 2027, 2025, 2024, 2025, 2022, 2021, 2016, 2012, + 2012, 2014, 2014, 2014, 2013, 2011, 2010, 2008, + 2010, 2009, 2008, 2007, 2006, 2008, 2009, 2010, + 2011, 2008, 2009, 2011, 2010, 2012, 2012, 2011, + 2011, 2008, 2010, 2012, 2012, 2014, 2014, 2013, + 2007, 2012, 2017, 2018, 2016, 2013, 2011, 2015, + 2016, 2018, 2020, 2019, 2018, 2020, 2021, 2023, + 2024, 2023, 2026, 2024, 2025, 2027, 2027, 2026, + 2025, 2026, 2026, 2024, 2025, 2024, 2019, 2017, + 2015, 2012, 2010, 2009, 2010, 2010, 2008, 2005, + 2007, 2008, 2004, 2002, 1999, 1995, 1994, 1997, + 1997, 1997, 1996, 1995, 2000, 2001, 1998, 1998, + 1994, 1994, 1993, 1993, 1990, 1991, 1991, 1991, + 1996, 1993, 1995, 1995, 1997, 1994, 1994, 1994, + 1993, 1993, 1990, 1990, 1992, 1994, 1996, 1998, + 1998, 1998, 2000, 2002, 2001, 2001, 2000, 1998, + 2003, 2004, 2002, 2003, 2006, 2006, 2007, 2004, + 2002, 2001, 2000, 2000, 2002, 2001, 2002, 2003, + 2003, 2005, 2002, 2003, 2004, 2004, 2003, 1999, + 1996, 1998, 2000, 2001, 2001, 2000, 2001, 2003, + 2007, 2006, 2006, 2006, 2007, 2005, 2009, 2008, + 2008, 2011, 2011, 2017, 2016, 2016, 2019, 2021, + 2022, 2023, 2020, 2019, 2021, 2022, 2022, 2019, + 2020, 2021, 2022, 2021, 2025, 2027, 2025, 2025, + 2026, 2028, 2029, 2031, 2029, 2030, 2033, 2034, + 2034, 2031, 2030, 2032, 2033, 2032, 2033, 2032, + 2032, 2033, 2033, 2033, 2034, 2033, 2033, 2035, + 2034, 2032, 2033, 2034, 2030, 2028, 2026, 2026, + 2029, 2028, 2028, 2027, 2029, 2031, 2033, 2034, + 2034, 2033, 2032, 2034, 2034, 2032, 2031, 2034, + 2032, 2034, 2030, 2032, 2033, 2031, 2032, 2031, + 2030, 2031, 2031, 2030, 2029, 2028, 2027, 2028, + 2029, 2029, 2027, 2027, 2027, 2028, 2029, 2025, + 2024, 2022, 2022, 2025, 2026, 2027, 2026, 2027, + 2030, 2032, 2030, 2030, 2028, 2029, 2028, 2027, + 2028, 2030, 2032, 2030, 2032, 2033, 2032, 2031, + 2030, 2033, 2031, 2031, 2034, 2033, 2039, 2039, + 2039, 2041, 2043, 2043, 2041, 2039, 2038, 2038, + 2039, 2040, 2041, 2040, 2044, 2044, 2043, 2044, + 2044, 2047, 2049, 2045, 2046, 2046, 2044, 2046, + 2046, 2046, 2047, 2043, 2040, 2041, 2040, 2041, + 2045, 2044, 2044, 2046, 2043, 2042, 2042, 2041, + 2041, 2041, 2042, 2043, 2043, 2044, 2044, 2042, + 2042, 2044, 2044, 2044, 2046, 2045, 2046, 2046, + 2044, 2043, 2044, 2041, 2040, 2042, 2043, 2042, + 2043, 2047, 2046, 2048, 2045, 2045, 2046, 2046, + 2045, 2046, 2046, 2044, 2042, 2042, 2043, 2045, + 2047, 2046, 2046, 2048, 2048, 2049, 2050, 2049, + 2047, 2047, 2048, 2050, 2050, 2049, 2050, 2050, + 2051, 2050, 2048, 2048, 2047, 2044, 2044, 2043, + 2042, 2043, 2041, 2040, 2041, 2039, 2038, 2038, + 2038, 2038, 2039, 2036, 2034, 2034, 2031, 2031, + 2031, 2029, 2028, 2027, 2028, 2028, 2026, 2025, + 2027, 2030, 2028, 2027, 2025, 2024, 2023, 2020, + 2021, 2020, 2018, 2021, 2021, 2020, 2018, 2020, + 2019, 2021, 2026, 2027, 2027, 2027, 2028, 2027, + 2028, 2026, 2029, 2026, 2025, 2028, 2029, 2030, + 2033, 2034, 2034, 2034, 2036, 2036, 2039, 2041, + 2041, 2040, 2039, 2036, 2033, 2030, 2032, 2031, + 2029, 2034, 2039, 2044, 2048, 2051, 2054, 2055, + 2054, 2057, 2059, 2056, 2053, 2050, 2048, 2044, + 2037, 2033, 2030, 2026, 2027, 2028, 2031, 2037, + 2042, 2046, 2051, 2051, 2056, 2056, 2052, 2048, + 2044, 2037, 2029, 2023, 2014, 2007, 2003, 2002, + 2001, 1999, 1952, 1835, 1745, 1700, 1674, 1683, + 1730, 1806, 1892, 1979, 2053, 2095, 2102, 2106, + 2121, 2130, 2119, 2100, 2071, 2028, 1984, 1947, + 1918, 1900, 1904, 1935, 1979, 2022, 2068, 2117, + 2154, 2185, 2200, 2203, 2195, 2171, 2138, 2103, + 2079, 2045, 2012, 2001, 2006, 2014, 2025, 2046, + 2071, 2087, 2104, 2123, 2137, 2145, 2147, 2156, + 2150, 2130, 2105, 2082, 2044, 2005, 1982, 1967, + 1967, 1976, 1996, 1991, 1900, 1837, 1827, 1801, + 1808, 1817, 1847, 1897, 1932, 1965, 1973, 1967, + 1969, 2007, 2030, 2021, 2003, 1972, 1936, 1895, + 1870, 1845, 1822, 1827, 1856, 1892, 1915, 1937, + 1964, 1985, 2006, 2025, 2041, 2046, 2029, 2015, + 2001, 1988, 1969, 1936, 1912, 1908, 1909, 1918, + 1931, 1948, 1974, 2003, 2029, 2050, 2066, 2074, + 2075, 2065, 2045, 2027, 2012, 1990, 1967, 1957, + 1960, 1970, 1981, 1996, 2015, 2026, 2040, 2054, + 2058, 2051, 2049, 2056, 2058, 2049, 2029, 2008, + 1991, 1985, 1983, 1975, 1951, 1915, 1878, 1859, + 1850, 1841, 1846, 1863, 1891, 1923, 1957, 1977, + 1975, 1960, 1953, 1956, 1965, 1970, 1964, 1957, + 1943, 1933, 1923, 1910, 1898, 1892, 1897, 1914, + 1945, 1973, 2000, 2018, 2031, 2040, 2038, 2026, + 2002, 1975, 1954, 1945, 1942, 1938, 1941, 1951, + 1964, 1971, 1972, 1970, 1979, 1989, 1996, 2004, + 2013, 2012, 2009, 2022, 2016, 1991, 1975, 1980, + 1974, 1947, 1934, 1950, 1976, 2002, 2023, 2035, + 2041, 2047, 2053, 2046, 2030, 2021, 2017, 2011, + 2015, 2021, 2010, 1991, 1984, 1996, 2011, 2016, + 2013, 2008, 2006, 2017, 2024, 2023, 2026, 2032, + 2031, 2030, 2029, 2025, 2004, 1987, 1996, 2021, + 2041, 2042, 2035, 2033, 2031, 2026, 2011, 1998, + 1989, 1977, 1963, 1956, 1957, 1951, 1941, 1935, + 1939, 1951, 1956, 1956, 1952, 1948, 1950, 1950, + 1945, 1938, 1908, 1840, 1792, 1779, 1765, 1742, + 1726, 1745, 1771, 1801, 1839, 1877, 1904, 1924, + 1950, 1965, 1975, 1976, 1957, 1929, 1906, 1900, + 1888, 1864, 1847, 1846, 1861, 1881, 1909, 1945, + 1986, 2019, 2043, 2056, 2062, 2055, 2026, 2000, + 1988, 1976, 1954, 1935, 1934, 1950, 1972, 1984, + 1998, 2022, 2047, 2060, 2063, 2064, 2062, 2057, + 2046, 2040, 2033, 2016, 2000, 1991, 1978, 1969, + 1972, 1995, 2016, 2028, 2051, 2070, 2071, 2066, + 2059, 2044, 2023, 2007, 2003, 1999, 1984, 1970, + 1965, 1963, 1962, 1970, 1982, 1988, 1993, 1996, + 2001, 2005, 2000, 2001, 1999, 1991, 1984, 1972, + 1960, 1944, 1929, 1920, 1919, 1935, 1958, 1974, + 1980, 1991, 2005, 2018, 2015, 1997, 1984, 1971, + 1956, 1948, 1945, 1940, 1945, 1963, 1973, 1972, + 1975, 1981, 1986, 1988, 1995, 2009, 2020, 2032, + 2035, 2026, 2008, 1991, 1973, 1962, 1964, 1971, + 1981, 1999, 2025, 2050, 2063, 2068, 2062, 2052, + 2044, 2038, 2033, 2028, 2027, 2028, 2031, 2031, + 2033, 2029, 2021, 2019, 2017, 2021, 2031, 2044, + 2058, 2068, 2075, 2074, 2067, 2056, 2044, 2031, + 2015, 2002, 2000, 1997, 2001, 2010, 2012, 2025, + 2035, 2041, 2044, 2046, 2048, 2043, 2039, 2035, + 2036, 2032, 2025, 2016, 2004, 1989, 1982, 1983, + 1989, 1998, 2008, 2021, 2032, 2036, 2037, 2035, + 2031, 2021, 2012, 2011, 2008, 2002, 1999, 2000, + 2001, 2003, 2011, 2021, 2025, 2024, 2027, 2033, + 2036, 2036, 2038, 2039, 2042, 2040, 2037, 2034, + 2027, 2019, 2013, 2012, 2013, 2018, 2030, 2043, + 2057, 2067, 2074, 2075, 2069, 2060, 2051, 2044, + 2036, 2030, 2031, 2033, 2037, 2040, 2043, 2043, + 2048, 2053, 2054, 2054, 2061, 2069, 2066, 2060, + 2059, 2056, 2052, 2050, 2054, 2057, 2053, 2055, + 2055, 2059, 2060, 2063, 2067, 2069, 2068, 2070, + 2067, 2058, 2047, 2043, 2042, 2039, 2040, 2047, + 2051, 2050, 2052, 2055, 2058, 2056, 2055, 2053, + 2053, 2049, 2047, 2045, 2040, 2036, 2031, 2028, + 2026, 2026, 2032, 2039, 2047, 2053, 2058, 2061, + 2060, 2062, 2056, 2046, 2043, 2040, 2040, 2037, + 2036, 2037, 2041, 2042, 2044, 2048, 2048, 2050, + 2056, 2062, 2066, 2068, 2071, 2072, 2070, 2069, + 2066, 2057, 2048, 2044, 2044, 2047, 2050, 2055, + 2061, 2067, 2072, 2078, 2083, 2085, 2088, 2087, + 2084, 2083, 2076, 2071, 2067, 2062, 2060, 2060, + 2058, 2056, 2059, 2065, 2073, 2079, 2088, 2089, + 2093, 2097, 2097, 2092, 2084, 2078, 2074, 2067, + 2060, 2058, 2056, 2058, 2058, 2065, 2067, 2073, + 2077, 2081, 2080, 2074, 2072, 2069, 2067, 2063, + 2062, 2059, 2061, 2060, 2057, 2055, 2054, 2057, + 2061, 2065, 2067, 2065, 2063, 2063, 2061, 2058, + 2053, 2052, 2050, 2051, 2053, 2057, 2059, 2061, + 2060, 2058, 2060, 2058, 2061, 2068, 2071, 2070, + 2066, 2069, 2067, 2061, 2055, 2052, 2054, 2054, + 2055, 2056, 2061, 2063, 2065, 2066, 2071, 2076, + 2080, 2082, 2081, 2080, 2075, 2068, 2058, 2048, + 2040, 2036, 2035, 2040, 2050, 2059, 2070, 2083, + 2092, 2097, 2094, 2091, 2087, 2077, 2070, 2062, + 2054, 2049, 2048, 2048, 2046, 2044, 2051, 2058, + 2067, 2075, 2088, 2091, 2085, 2077, 2068, 2063, + 2056, 2056, 2062, 2064, 2061, 2056, 2051, 2046, + 2044, 2047, 2050, 2057, 2063, 2064, 2061, 2056, + 2057, 2059, 2063, 2068, 2068, 2068, 2063, 2054, + 2043, 2036, 2033, 2035, 2039, 2045, 2048, 2051, + 2049, 2047, 2048, 2046, 2052, 2057, 2058, 2058, + 2054, 2046, 2040, 2039, 2036, 2037, 2041, 2045, + 2049, 2052, 2049, 2042, 2030, 2022, 2020, 2022, + 2029, 2039, 2048, 2058, 2064, 2062, 2056, 2045, + 2040, 2036, 2032, 2029, 2024, 2020, 2014, 2012, + 2016, 2023, 2034, 2043, 2051, 2053, 2052, 2048, + 2041, 2034, 2030, 2028, 2027, 2024, 2016, 2008, + 2003, 2001, 2003, 2009, 2019, 2026, 2032, 2033, + 2033, 2032, 2033, 2036, 2038, 2038, 2034, 2035, + 2031, 2029, 2024, 2023, 2024, 2027, 2027, 2026, + 2020, 2017, 2018, 2022, 2026, 2031, 2038, 2039, + 2038, 2039, 2038, 2036, 2030, 2024, 2022, 2020, + 2016, 2012, 2011, 2011, 2013, 2018, 2025, 2028, + 2026, 2024, 2018, 2014, 2008, 2003, 2001, 2007, + 2014, 2025, 2029, 2026, 2019, 2008, 1999, 1990, + 1985, 1984, 1989, 1995, 2007, 2015, 2015, 2015, + 2014, 2013, 2012, 2016, 2016, 2015, 2014, 2008, + 2001, 1991, 1987, 1984, 1986, 1989, 1995, 2004, + 2009, 2011, 2010, 2006, 2000, 1996, 1997, 1996, + 2000, 2000, 1999, 2002, 2001, 2000, 1997, 1994, + 1989, 1988, 1986, 1981, 1977, 1979, 1982, 1986, + 1990, 1998, 2000, 2002, 2001, 2000, 1993, 1983, + 1977, 1970, 1963, 1960, 1963, 1962, 1965, 1966, + 1967, 1969, 1968, 1972, 1976, 1979, 1983, 1984, + 1985, 1986, 1982, 1975, 1969, 1963, 1960, 1958, + 1961, 1965, 1969, 1972, 1976, 1980, 1983, 1988, + 1989, 1990, 1991, 1990, 1986, 1984, 1983, 1980, + 1974, 1972, 1973, 1977, 1984, 1992, 1997, 2000, + 2005, 2009, 2009, 2003, 1998, 1992, 1986, 1983, + 1977, 1973, 1969, 1968, 1974, 1977, 1984, 1992, + 1998, 2004, 2001, 1996, 1990, 1986, 1984, 1982, + 1982, 1986, 1988, 1990, 1988, 1986, 1984, 1984, + 1983, 1984, 1988, 1993, 1998, 2003, 2005, 2001, + 1996, 1991, 1986, 1983, 1979, 1982, 1983, 1986, + 1991, 1992, 1990, 1986, 1984, 1980, 1982, 1982, + 1984, 1986, 1984, 1987, 1987, 1982, 1984, 1986, + 1983, 1984, 1985, 1987, 1986, 1985, 1982, 1982, + 1984, 1985, 1988, 1986, 1988, 1990, 1991, 1992, + 1993, 1992, 1991, 1991, 1988, 1987, 1990, 1991, + 1994, 1997, 2001, 2001, 1999, 1995, 1988, 1984, + 1980, 1976, 1976, 1982, 1985, 1987, 1989, 1991, + 1993, 1993, 1996, 1999, 2003, 2005, 2004, 2004, + 2002, 1998, 1994, 1989, 1986, 1984, 1983, 1984, + 1983, 1981, 1985, 1986, 1986, 1986, 1988, 1992, + 1997, 2000, 1999, 1996, 1991, 1991, 1988, 1982, + 1983, 1980, 1981, 1984, 1984, 1985, 1985, 1989, + 1991, 1994, 1999, 1996, 1994, 1989, 1988, 1988, + 1979, 1980, 1979, 1980, 1979, 1980, 1982, 1984, + 1985, 1986, 1988, 1988, 1992, 1991, 1989, 1987, + 1988, 1987, 1987, 1991, 1994, 1999, 2003, 2001, + 2000, 1999, 1996, 1991, 1990, 1990, 1991, 1990, + 1992, 1994, 1993, 1997, 1997, 2002, 2009, 2016, + 2022, 2025, 2028, 2027, 2024, 2024, 2024, 2022, + 2025, 2024, 2022, 2021, 2019, 2017, 2014, 2017, + 2020, 2023, 2026, 2030, 2034, 2036, 2033, 2032, + 2030, 2029, 2027, 2021, 2019, 2017, 2016, 2019, + 2027, 2031, 2033, 2035, 2032, 2030, 2024, 2022, + 2016, 2015, 2017, 2014, 2013, 2013, 2012, 2012, + 2014, 2017, 2023, 2029, 2033, 2036, 2037, 2034, + 2032, 2029, 2029, 2029, 2030, 2030, 2032, 2030, + 2026, 2021, 2019, 2021, 2027, 2033, 2038, 2040, + 2044, 2047, 2043, 2038, 2035, 2033, 2031, 2030, + 2030, 2030, 2031, 2033, 2038, 2039, 2038, 2037, + 2039, 2038, 2037, 2035, 2036, 2039, 2042, 2043, + 2041, 2042, 2042, 2040, 2036, 2037, 2040, 2040, + 2042, 2046, 2049, 2046, 2044, 2044, 2043, 2040, + 2036, 2039, 2042, 2045, 2048, 2043, 2040, 2037, + 2036, 2034, 2033, 2032, 2032, 2032, 2036, 2037, + 2040, 2041, 2042, 2043, 2047, 2051, 2051, 2049, + 2047, 2043, 2035, 2031, 2027, 2025, 2026, 2024, + 2030, 2034, 2036, 2038, 2039, 2045, 2052, 2054, + 2055, 2054, 2053, 2052, 2051, 2048, 2046, 2044, + 2048, 2048, 2046, 2046, 2047, 2046, 2047, 2048, + 2049, 2051, 2051, 2052, 2051, 2052, 2052, 2055, + 2062, 2064, 2067, 2068, 2066, 2068, 2067, 2066, + 2069, 2069, 2070, 2072, 2071, 2071, 2067, 2062, + 2061, 2063, 2064, 2067, 2067, 2067, 2071, 2071, + 2074, 2079, 2080, 2081, 2080, 2078, 2074, 2072, + 2068, 2062, 2060, 2061, 2064, 2065, 2069, 2073, + 2076, 2081, 2084, 2089, 2091, 2094, 2093, 2093, + 2090, 2086, 2085, 2081, 2081, 2081, 2082, 2082, + 2081, 2081, 2080, 2078, 2080, 2084, 2086, 2090, + 2096, 2095, 2095, 2093, 2091, 2085, 2086, 2088, + 2088, 2090, 2091, 2091, 2089, 2088, 2089, 2088, + 2087, 2089, 2089, 2092, 2096, 2099, 2102, 2101, + 2100, 2102, 2102, 2098, 2096, 2092, 2089, 2086, + 2084, 2086, 2093, 2097, 2105, 2111, 2115, 2116, + 2114, 2112, 2111, 2112, 2113, 2116, 2114, 2119, + 2124, 2127, 2122, 2115, 2114, 2111, 2111, 2112, + 2114, 2115, 2118, 2123, 2127, 2131, 2133, 2135, + 2136, 2135, 2131, 2130, 2130, 2131, 2130, 2129, + 2131, 2135, 2136, 2139, 2139, 2137, 2133, 2130, + 2126, 2124, 2129, 2129, 2129, 2126, 2126, 2128, + 2128, 2126, 2127, 2127, 2132, 2134, 2131, 2129, + 2126, 2124, 2122, 2119, 2115, 2112, 2110, 2111, + 2112, 2114, 2114, 2116, 2115, 2118, 2121, 2125, + 2126, 2124, 2124, 2120, 2118, 2115, 2113, 2110, + 2111, 2111, 2109, 2108, 2110, 2112, 2115, 2119, + 2121, 2123, 2123, 2121, 2121, 2120, 2123, 2124, + 2125, 2127, 2128, 2129, 2127, 2124, 2119, 2114, + 2112, 2110, 2111, 2114, 2114, 2118, 2123, 2126, + 2127, 2125, 2126, 2130, 2131, 2133, 2130, 2128, + 2125, 2120, 2118, 2117, 2116, 2119, 2129, 2132, + 2133, 2134, 2131, 2132, 2131, 2134, 2137, 2139, + 2140, 2139, 2138, 2133, 2130, 2126, 2123, 2123, + 2127, 2128, 2130, 2134, 2133, 2134, 2137, 2140, + 2142, 2144, 2144, 2141, 2136, 2133, 2128, 2121, + 2118, 2120, 2127, 2129, 2134, 2138, 2138, 2138, + 2134, 2133, 2131, 2133, 2134, 2131, 2126, 2121, + 2115, 2108, 2109, 2114, 2120, 2128, 2136, 2141, + 2142, 2142, 2143, 2139, 2139, 2139, 2137, 2135, + 2128, 2123, 2116, 2110, 2108, 2108, 2110, 2116, + 2119, 2122, 2128, 2129, 2126, 2123, 2125, 2127, + 2130, 2128, 2124, 2119, 2113, 2106, 2104, 2105, + 2107, 2110, 2115, 2118, 2118, 2118, 2118, 2115, + 2114, 2115, 2115, 2115, 2114, 2112, 2111, 2111, + 2110, 2112, 2115, 2116, 2117, 2119, 2116, 2115, + 2112, 2111, 2110, 2108, 2107, 2105, 2106, 2106, + 2106, 2106, 2106, 2106, 2107, 2108, 2108, 2107, + 2110, 2113, 2115, 2113, 2108, 2103, 2094, 2086, + 2084, 2086, 2087, 2084, 2085, 2089, 2090, 2091, + 2096, 2100, 2103, 2105, 2110, 2108, 2105, 2098, + 2093, 2091, 2087, 2089, 2094, 2099, 2101, 2101, + 2097, 2094, 2093, 2090, 2096, 2104, 2109, 2110, + 2108, 2104, 2102, 2102, 2104, 2108, 2113, 2117, + 2120, 2119, 2118, 2118, 2113, 2115, 2119, 2120, + 2125, 2126, 2121, 2117, 2111, 2108, 2110, 2112, + 2116, 2121, 2127, 2129, 2130, 2127, 2128, 2128, + 2130, 2134, 2137, 2136, 2133, 2129, 2124, 2119, + 2115, 2115, 2117, 2121, 2127, 2131, 2132, 2132, + 2131, 2131, 2135, 2138, 2140, 2138, 2136, 2130, + 2124, 2122, 2123, 2125, 2132, 2138, 2144, 2147, + 2147, 2146, 2144, 2144, 2143, 2143, 2144, 2143, + 2138, 2133, 2127, 2121, 2118, 2121, 2128, 2135, + 2143, 2151, 2154, 2152, 2151, 2147, 2143, 2142, + 2142, 2139, 2135, 2134, 2133, 2133, 2134, 2135, + 2136, 2140, 2144, 2143, 2143, 2144, 2144, 2144, + 2144, 2145, 2148, 2146, 2145, 2144, 2143, 2139, + 2139, 2138, 2139, 2140, 2141, 2144, 2149, 2152, + 2155, 2157, 2158, 2160, 2160, 2160, 2157, 2156, + 2153, 2151, 2152, 2152, 2149, 2148, 2148, 2147, + 2149, 2152, 2158, 2161, 2165, 2164, 2165, 2166, + 2166, 2164, 2161, 2163, 2163, 2163, 2160, 2157, + 2157, 2156, 2153, 2155, 2159, 2162, 2163, 2166, + 2171, 2171, 2170, 2166, 2161, 2157, 2153, 2153, + 2155, 2155, 2152, 2153, 2155, 2157, 2159, 2160, + 2165, 2168, 2167, 2167, 2161, 2156, 2154, 2152, + 2152, 2154, 2155, 2157, 2156, 2159, 2156, 2157, + 2157, 2158, 2159, 2163, 2169, 2166, 2162, 2158, + 2154, 2153, 2151, 2148, 2152, 2158, 2156, 2155, + 2157, 2159, 2156, 2154, 2154, 2157, 2156, 2158, + 2160, 2158, 2156, 2153, 2151, 2149, 2146, 2150, + 2155, 2156, 2159, 2160, 2161, 2163, 2166, 2168, + 2168, 2169, 2170, 2169, 2164, 2157, 2152, 2150, + 2150, 2148, 2150, 2155, 2162, 2165, 2170, 2172, + 2177, 2181, 2184, 2184, 2182, 2180, 2175, 2171, + 2164, 2160, 2156, 2157, 2161, 2162, 2164, 2167, + 2165, 2163, 2165, 2165, 2167, 2169, 2171, 2172, + 2172, 2171, 2170, 2170, 2173, 2176, 2172, 2171, + 2171, 2171, 2165, 2160, 2153, 2154, 2159, 2167, + 2170, 2170, 2171, 2173, 2172, 2170, 2169, 2171, + 2174, 2176, 2180, 2179, 2174, 2170, 2168, 2168, + 2167, 2167, 2168, 2169, 2171, 2169, 2169, 2171, + 2173, 2177, 2179, 2185, 2189, 2191, 2188, 2181, + 2179, 2178, 2176, 2179, 2182, 2183, 2178, 2177, + 2172, 2165, 2159, 2158, 2164, 2168, 2169, 2173, + 2173, 2170, 2173, 2175, 2177, 2179, 2185, 2189, + 2193, 2190, 2186, 2183, 2180, 2182, 2182, 2184, + 2188, 2188, 2185, 2180, 2174, 2172, 2171, 2170, + 2173, 2178, 2178, 2178, 2176, 2177, 2177, 2179, + 2184, 2188, 2194, 2199, 2200, 2198, 2193, 2188, + 2182, 2177, 2175, 2172, 2172, 2172, 2174, 2173, + 2175, 2173, 2179, 2186, 2190, 2197, 2200, 2201, + 2196, 2190, 2185, 2180, 2176, 2174, 2169, 2167, + 2164, 2162, 2158, 2157, 2158, 2162, 2169, 2177, + 2185, 2190, 2192, 2192, 2186, 2180, 2175, 2173, + 2169, 2166, 2165, 2162, 2158, 2153, 2152, 2155, + 2161, 2168, 2176, 2185, 2185, 2184, 2181, 2180, + 2176, 2174, 2175, 2177, 2181, 2185, 2185, 2179, + 2177, 2172, 2169, 2170, 2172, 2174, 2175, 2176, + 2172, 2170, 2171, 2174, 2179, 2185, 2191, 2198, + 2203, 2202, 2197, 2190, 2190, 2190, 2188, 2190, + 2188, 2183, 2178, 2173, 2168, 2167, 2166, 2173, + 2180, 2188, 2199, 2202, 2205, 2202, 2201, 2195, + 2192, 2191, 2190, 2189, 2186, 2182, 2179, 2177, + 2175, 2176, 2178, 2185, 2189, 2193, 2196, 2195, + 2197, 2195, 2192, 2193, 2194, 2196, 2196, 2189, + 2183, 2181, 2180, 2182, 2185, 2190, 2198, 2201, + 2206, 2203, 2198, 2192, 2186, 2185, 2182, 2179, + 2178, 2179, 2175, 2175, 2180, 2186, 2191, 2195, + 2199, 2201, 2199, 2196, 2190, 2190, 2185, 2184, + 2182, 2179, 2177, 2170, 2164, 2162, 2162, 2165, + 2169, 2173, 2180, 2186, 2191, 2193, 2194, 2193, + 2193, 2192, 2190, 2186, 2185, 2182, 2175, 2172, + 2171, 2171, 2172, 2174, 2179, 2180, 2182, 2188, + 2190, 2191, 2192, 2192, 2192, 2190, 2188, 2190, + 2188, 2185, 2183, 2182, 2181, 2179, 2178, 2178, + 2175, 2175, 2175, 2176, 2179, 2180, 2183, 2182, + 2179, 2179, 2178, 2177, 2179, 2180, 2187, 2188, + 2192, 2194, 2194, 2193, 2191, 2192, 2192, 2188, + 2185, 2183, 2183, 2182, 2180, 2184, 2186, 2191, + 2195, 2199, 2200, 2203, 2201, 2201, 2203, 2206, + 2208, 2207, 2209, 2205, 2198, 2193, 2186, 2185, + 2183, 2188, 2190, 2194, 2198, 2199, 2200, 2199, + 2200, 2202, 2203, 2204, 2202, 2202, 2200, 2192, + 2186, 2183, 2177, 2174, 2172, 2166, 2164, 2161, + 2160, 2158, 2158, 2160, 2161, 2167, 2169, 2169, + 2165, 2162, 2160, 2161, 2161, 2162, 2164, 2167, + 2167, 2165, 2161, 2156, 2155, 2150, 2146, 2147, + 2150, 2152, 2156, 2158, 2161, 2164, 2166, 2166, + 2165, 2165, 2163, 2163, 2161, 2159, 2158, 2157, + 2160, 2157, 2158, 2156, 2153, 2148, 2147, 2150, + 2154, 2155, 2159, 2162, 2166, 2165, 2165, 2166, + 2164, 2163, 2158, 2154, 2152, 2151, 2151, 2151, + 2148, 2147, 2147, 2147, 2148, 2149, 2154, 2158, + 2162, 2165, 2166, 2170, 2172, 2172, 2172, 2169, + 2169, 2166, 2164, 2162, 2160, 2159, 2159, 2162, + 2166, 2167, 2168, 2170, 2172, 2172, 2174, 2175, + 2177, 2178, 2183, 2185, 2181, 2179, 2176, 2174, + 2169, 2164, 2162, 2163, 2161, 2165, 2165, 2165, + 2169, 2171, 2173, 2175, 2177, 2178, 2177, 2177, + 2176, 2174, 2174, 2176, 2177, 2177, 2177, 2174, + 2173, 2170, 2167, 2167, 2170, 2173, 2179, 2182, + 2182, 2183, 2183, 2185, 2188, 2190, 2192, 2194, + 2193, 2193, 2192, 2191, 2190, 2191, 2194, 2194, + 2196, 2201, 2203, 2202, 2198, 2198, 2199, 2205, + 2208, 2214, 2218, 2220, 2218, 2220, 2218, 2219, + 2220, 2219, 2218, 2216, 2213, 2212, 2214, 2210, + 2210, 2212, 2213, 2215, 2217, 2216, 2217, 2218, + 2220, 2223, 2223, 2226, 2228, 2228, 2224, 2223, + 2220, 2219, 2218, 2219, 2218, 2216, 2216, 2218, + 2221, 2221, 2225, 2230, 2238, 2245, 2250, 2250, + 2250, 2249, 2241, 2237, 2235, 2232, 2230, 2227, + 2227, 2230, 2230, 2231, 2235, 2238, 2238, 2240, + 2244, 2246, 2244, 2243, 2244, 2246, 2247, 2246, + 2243, 2239, 2237, 2233, 2231, 2230, 2231, 2231, + 2234, 2237, 2240, 2243, 2242, 2239, 2238, 2240, + 2243, 2242, 2243, 2246, 2250, 2253, 2251, 2249, + 2251, 2250, 2249, 2249, 2249, 2247, 2247, 2247, + 2247, 2246, 2246, 2248, 2249, 2251, 2253, 2254, + 2256, 2258, 2258, 2261, 2261, 2260, 2261, 2258, + 2257, 2252, 2251, 2252, 2247, 2245, 2244, 2243, + 2245, 2241, 2239, 2239, 2241, 2241, 2242, 2243, + 2246, 2244, 2241, 2237, 2235, 2235, 2232, 2231, + 2231, 2232, 2230, 2230, 2229, 2230, 2233, 2233, + 2233, 2237, 2239, 2239, 2238, 2237, 2239, 2242, + 2244, 2244, 2245, 2243, 2236, 2232, 2227, 2223, + 2225, 2226, 2230, 2232, 2235, 2234, 2234, 2234, + 2235, 2240, 2240, 2245, 2248, 2249, 2245, 2239, + 2235, 2231, 2226, 2224, 2223, 2219, 2218, 2217, + 2217, 2217, 2221, 2223, 2227, 2230, 2232, 2233, + 2231, 2231, 2228, 2226, 2226, 2224, 2219, 2218, + 2216, 2211, 2211, 2213, 2217, 2218, 2221, 2223, + 2226, 2231, 2235, 2242, 2248, 2251, 2251, 2253, + 2254, 2259, 2259, 2254, 2255, 2254, 2250, 2246, + 2241, 2238, 2232, 2231, 2234, 2239, 2241, 2243, + 2248, 2250, 2254, 2256, 2259, 2262, 2264, 2263, + 2261, 2255, 2251, 2246, 2240, 2233, 2230, 2233, + 2232, 2228, 2224, 2223, 2222, 2221, 2223, 2227, + 2230, 2235, 2234, 2232, 2230, 2231, 2230, 2232, + 2232, 2232, 2229, 2227, 2228, 2225, 2224, 2224, + 2227, 2229, 2227, 2228, 2227, 2228, 2230, 2230, + 2229, 2231, 2233, 2233, 2231, 2226, 2226, 2223, + 2223, 2223, 2225, 2228, 2227, 2228, 2226, 2226, + 2224, 2221, 2223, 2224, 2225, 2227, 2229, 2227, + 2228, 2225, 2224, 2223, 2226, 2224, 2224, 2226, + 2225, 2226, 2226, 2226, 2225, 2224, 2225, 2227, + 2225, 2223, 2223, 2227, 2227, 2226, 2227, 2226, + 2226, 2225, 2226, 2228, 2227, 2229, 2229, 2232, + 2231, 2232, 2230, 2233, 2232, 2232, 2231, 2230, + 2231, 2230, 2230, 2231, 2231, 2233, 2234, 2235, + 2235, 2231, 2228, 2227, 2226, 2224, 2222, 2222, + 2222, 2224, 2221, 2220, 2217, 2215, 2213, 2214, + 2215, 2216, 2215, 2212, 2211, 2209, 2211, 2212, + 2209, 2211, 2212, 2210, 2206, 2203, 2199, 2197, + 2198, 2199, 2203, 2207, 2210, 2212, 2214, 2216, + 2219, 2220, 2222, 2224, 2226, 2227, 2223, 2217, + 2212, 2206, 2203, 2197, 2193, 2193, 2195, 2199, + 2203, 2209, 2213, 2216, 2218, 2223, 2225, 2227, + 2228, 2222, 2219, 2214, 2213, 2213, 2213, 2210, + 2210, 2207, 2207, 2206, 2204, 2201, 2204, 2207, + 2209, 2212, 2214, 2216, 2215, 2211, 2206, 2204, + 2203, 2199, 2200, 2198, 2199, 2202, 2200, 2199, + 2198, 2198, 2198, 2200, 2201, 2199, 2201, 2199, + 2198, 2193, 2192, 2191, 2190, 2190, 2192, 2192, + 2192, 2191, 2191, 2191, 2193, 2193, 2194, 2193, + 2192, 2192, 2188, 2185, 2182, 2181, 2177, 2177, + 2178, 2175, 2176, 2174, 2175, 2172, 2173, 2172, + 2172, 2172, 2170, 2169, 2164, 2158, 2153, 2149, + 2144, 2143, 2138, 2134, 2132, 2135, 2138, 2137, + 2138, 2140, 2144, 2147, 2148, 2149, 2150, 2147, + 2144, 2143, 2141, 2139, 2136, 2134, 2132, 2132, + 2133, 2132, 2131, 2136, 2138, 2142, 2146, 2146, + 2147, 2146, 2148, 2147, 2142, 2140, 2139, 2138, + 2138, 2133, 2130, 2126, 2122, 2121, 2123, 2124, + 2123, 2125, 2127, 2128, 2126, 2125, 2123, 2120, + 2117, 2112, 2110, 2107, 2104, 2102, 2096, 2092, + 2091, 2091, 2087, 2086, 2087, 2089, 2090, 2089, + 2087, 2086, 2088, 2090, 2094, 2095, 2095, 2093, + 2089, 2085, 2081, 2078, 2077, 2075, 2075, 2074, + 2073, 2073, 2069, 2066, 2065, 2064, 2064, 2062, + 2064, 2064, 2065, 2067, 2067, 2067, 2066, 2067, + 2065, 2064, 2064, 2062, 2059, 2055, 2053, 2053, + 2055, 2054, 2055, 2054, 2054, 2050, 2050, 2051, + 2051, 2051, 2052, 2055, 2059, 2060, 2058, 2058, + 2052, 2049, 2047, 2044, 2044, 2046, 2045, 2050, + 2051, 2052, 2051, 2052, 2055, 2053, 2055, 2056, + 2052, 2051, 2052, 2049, 2046, 2045, 2046, 2044, + 2043, 2043, 2043, 2041, 2042, 2043, 2045, 2047, + 2049, 2050, 2049, 2049, 2047, 2046, 2045, 2041, + 2042, 2041, 2041, 2038, 2039, 2038, 2036, 2036, + 2033, 2029, 2030, 2028, 2029, 2033, 2030, 2032, + 2031, 2030, 2030, 2030, 2029, 2028, 2031, 2030, + 2031, 2028, 2028, 2029, 2025, 2022, 2019, 2017, + 2013, 2011, 2010, 2009, 2011, 2012, 2013, 2016, + 2017, 2019, 2020, 2019, 2018, 2012, 2011, 2012, + 2012, 2013, 2009, 2008, 2007, 2008, 2008, 2011, + 2012, 2009, 2008, 2007, 2006, 2004, 2003, 2002, + 2003, 2001, 2001, 2001, 2002, 2002, 2005, 2004, + 2005, 2003, 2000, 2000, 1998, 1997, 1996, 1994, + 1990, 1987, 1983, 1985, 1985, 1988, 1991, 1994, + 1999, 2000, 1999, 1997, 1998, 1997, 1994, 1994, + 1993, 1990, 1988, 1985, 1979, 1977, 1977, 1977, + 1979, 1981, 1978, 1980, 1979, 1982, 1981, 1981, + 1983, 1983, 1983, 1984, 1983, 1985, 1983, 1977, + 1976, 1976, 1977, 1976, 1977, 1979, 1977, 1976, + 1971, 1966, 1965, 1963, 1962, 1965, 1968, 1967, + 1968, 1967, 1967, 1963, 1965, 1964, 1965, 1967, + 1969, 1968, 1964, 1962, 1960, 1957, 1955, 1953, + 1949, 1949, 1948, 1949, 1950, 1951, 1953, 1957, + 1963, 1964, 1963, 1965, 1960, 1959, 1957, 1951, + 1948, 1946, 1943, 1941, 1941, 1940, 1937, 1936, + 1939, 1939, 1941, 1944, 1944, 1945, 1945, 1946, + 1944, 1945, 1941, 1940, 1940, 1940, 1941, 1939, + 1935, 1936, 1936, 1934, 1933, 1934, 1935, 1937, + 1936, 1934, 1938, 1938, 1938, 1938, 1939, 1938, + 1938, 1939, 1939, 1940, 1937, 1936, 1932, 1933, + 1933, 1934, 1932, 1933, 1933, 1936, 1937, 1936, + 1941, 1944, 1946, 1948, 1952, 1954, 1953, 1950, + 1949, 1947, 1946, 1943, 1942, 1939, 1940, 1940, + 1940, 1938, 1939, 1940, 1940, 1940, 1942, 1945, + 1949, 1949, 1947, 1946, 1947, 1944, 1939, 1937, + 1938, 1936, 1936, 1939, 1937, 1938, 1937, 1935, + 1934, 1935, 1933, 1932, 1930, 1932, 1932, 1932, + 1933, 1933, 1936, 1938, 1942, 1945, 1947, 1948, + 1948, 1952, 1951, 1949, 1947, 1947, 1948, 1946, + 1945, 1945, 1945, 1946, 1944, 1945, 1948, 1952, + 1958, 1959, 1962, 1964, 1965, 1963, 1964, 1960, + 1957, 1956, 1951, 1947, 1943, 1942, 1938, 1939, + 1935, 1937, 1939, 1940, 1943, 1946, 1949, 1950, + 1948, 1947, 1948, 1948, 1947, 1943, 1938, 1939, + 1938, 1937, 1934, 1935, 1933, 1934, 1936, 1940, + 1941, 1942, 1943, 1943, 1946, 1944, 1944, 1944, + 1945, 1946, 1946, 1945, 1946, 1945, 1944, 1942, + 1939, 1936, 1937, 1935, 1935, 1936, 1935, 1937, + 1938, 1939, 1938, 1939, 1938, 1940, 1938, 1937, + 1936, 1935, 1932, 1929, 1926, 1925, 1921, 1921, + 1918, 1915, 1912, 1915, 1916, 1915, 1917, 1918, + 1921, 1925, 1927, 1924, 1921, 1918, 1920, 1918, + 1917, 1920, 1924, 1923, 1925, 1925, 1923, 1922, + 1923, 1926, 1929, 1929, 1932, 1936, 1937, 1936, + 1934, 1934, 1932, 1934, 1933, 1932, 1932, 1927, + 1926, 1926, 1926, 1927, 1925, 1924, 1923, 1923, + 1922, 1923, 1921, 1921, 1921, 1922, 1922, 1923, + 1922, 1923, 1925, 1926, 1927, 1927, 1927, 1928, + 1926, 1925, 1922, 1921, 1922, 1922, 1922, 1922, + 1920, 1921, 1921, 1918, 1919, 1919, 1923, 1924, + 1929, 1931, 1934, 1932, 1931, 1932, 1931, 1932, + 1933, 1931, 1931, 1930, 1931, 1932, 1930, 1930, + 1931, 1930, 1932, 1932, 1931, 1932, 1932, 1928, + 1928, 1930, 1931, 1932, 1932, 1933, 1932, 1930, + 1929, 1927, 1925, 1924, 1924, 1924, 1925, 1924, + 1925, 1927, 1927, 1927, 1924, 1925, 1928, 1927, + 1926, 1925, 1923, 1925, 1926, 1927, 1924, 1922, + 1921, 1919, 1921, 1918, 1917, 1918, 1921, 1922, + 1926, 1928, 1928, 1928, 1927, 1928, 1929, 1931, + 1931, 1930, 1932, 1932, 1928, 1930, 1928, 1927, + 1929, 1931, 1934, 1937, 1937, 1937, 1936, 1938, + 1938, 1939, 1937, 1938, 1937, 1937, 1936, 1933, + 1932, 1932, 1931, 1930, 1931, 1930, 1930, 1930, + 1932, 1932, 1932, 1934, 1936, 1937, 1937, 1936, + 1935, 1936, 1938, 1938, 1938, 1937, 1934, 1937, + 1934, 1928, 1930, 1928, 1930, 1930, 1932, 1934, + 1939, 1940, 1939, 1944, 1943, 1945, 1945, 1943, + 1940, 1940, 1942, 1939, 1942, 1938, 1936, 1935, + 1933, 1930, 1934, 1932, 1929, 1930, 1929, 1931, + 1929, 1927, 1928, 1926, 1925, 1923, 1920, 1920, + 1916, 1915, 1915, 1913, 1912, 1913, 1914, 1914, + 1911, 1911, 1909, 1907, 1909, 1909, 1907, 1909, + 1908, 1907, 1908, 1908, 1910, 1912, 1912, 1910, + 1910, 1913, 1912, 1915, 1916, 1913, 1914, 1911, + 1912, 1911, 1911, 1912, 1913, 1913, 1913, 1914, + 1916, 1916, 1914, 1912, 1911, 1909, 1909, 1907, + 1903, 1903, 1904, 1906, 1907, 1909, 1911, 1912, + 1913, 1912, 1913, 1913, 1912, 1914, 1913, 1913, + 1911, 1909, 1907, 1907, 1907, 1911, 1914, 1917, + 1920, 1922, 1925, 1927, 1928, 1929, 1927, 1927, + 1926, 1927, 1928, 1926, 1927, 1928, 1929, 1934, + 1937, 1938, 1939, 1940, 1941, 1940, 1938, 1937, + 1934, 1933, 1933, 1932, 1930, 1928, 1927, 1928, + 1928, 1928, 1930, 1934, 1936, 1934, 1936, 1938, + 1940, 1937, 1938, 1936, 1934, 1930, 1928, 1927, + 1929, 1928, 1925, 1928, 1930, 1932, 1936, 1940, + 1942, 1944, 1944, 1940, 1944, 1943, 1944, 1942, + 1941, 1941, 1942, 1941, 1943, 1944, 1946, 1950, + 1950, 1953, 1950, 1949, 1947, 1945, 1946, 1946, + 1946, 1948, 1950, 1948, 1946, 1946, 1947, 1946, + 1946, 1948, 1948, 1950, 1951, 1949, 1949, 1949, + 1948, 1944, 1942, 1946, 1945, 1946, 1944, 1949, + 1950, 1952, 1954, 1956, 1957, 1955, 1954, 1953, + 1952, 1949, 1948, 1949, 1950, 1951, 1955, 1956, + 1960, 1962, 1963, 1962, 1963, 1965, 1966, 1970, + 1970, 1969, 1967, 1964, 1962, 1959, 1958, 1957, + 1956, 1956, 1956, 1960, 1960, 1963, 1964, 1965, + 1965, 1966, 1964, 1963, 1962, 1960, 1959, 1958, + 1958, 1957, 1957, 1958, 1955, 1954, 1956, 1956, + 1956, 1957, 1957, 1958, 1959, 1959, 1957, 1958, + 1961, 1960, 1957, 1956, 1954, 1957, 1958, 1959, + 1958, 1957, 1961, 1961, 1963, 1959, 1960, 1963, + 1963, 1963, 1964, 1965, 1965, 1966, 1965, 1967, + 1965, 1967, 1968, 1966, 1971, 1971, 1970, 1969, + 1970, 1971, 1971, 1972, 1971, 1972, 1970, 1970, + 1969, 1967, 1967, 1966, 1967, 1971, 1972, 1974, + 1977, 1976, 1976, 1975, 1974, 1974, 1974, 1973, + 1971, 1972, 1973, 1973, 1973, 1974, 1974, 1975, + 1977, 1979, 1979, 1977, 1979, 1980, 1978, 1978, + 1976, 1976, 1975, 1975, 1974, 1973, 1971, 1974, + 1976, 1977, 1978, 1977, 1977, 1976, 1980, 1981, + 1977, 1977, 1977, 1976, 1975, 1977, 1975, 1974, + 1969, 1970, 1969, 1969, 1965, 1965, 1965, 1966, + 1968, 1967, 1970, 1971, 1972, 1973, 1974, 1973, + 1972, 1975, 1978, 1977, 1976, 1976, 1978, 1978, + 1979, 1981, 1980, 1980, 1981, 1980, 1981, 1980, + 1980, 1981, 1979, 1979, 1977, 1979, 1980, 1982, + 1983, 1984, 1985, 1987, 1992, 1994, 1996, 1997, + 1993, 1992, 1990, 1990, 1989, 1989, 1987, 1987, + 1988, 1986, 1988, 1992, 1993, 1993, 1993, 1994, + 1994, 1997, 1999, 2001, 2003, 2000, 1999, 1996, + 1997, 1996, 1996, 1995, 1996, 1996, 1994, 1994, + 1995, 1998, 1999, 2000, 2001, 2001, 2001, 2001, + 1999, 2001, 2004, 2003, 2006, 2008, 2005, 2007, + 2008, 2007, 2005, 2005, 2001, 2001, 2002, 2000, + 2001, 2002, 2000, 2001, 2003, 2001, 1997, 1994, + 1995, 1999, 2001, 2003, 2008, 2005, 2003, 2002, + 2001, 2001, 2000, 1999, 2000, 2001, 1998, 1997, + 1997, 1996, 1996, 1994, 1994, 1995, 1995, 1997, + 1996, 1996, 1999, 2001, 2001, 2003, 2006, 2004, + 2005, 2003, 2004, 2000, 1999, 1997, 1997, 1997, + 1994, 1994, 1993, 1993, 1994, 1996, 1995, 1994, + 1992, 1993, 1991, 1991, 1990, 1992, 1991, 1987, + 1986, 1986, 1985, 1984, 1986, 1982, 1980, 1979, + 1976, 1978, 1973, 1977, 1978, 1978, 1979, 1980, + 1981, 1981, 1983, 1982, 1983, 1985, 1982, 1985, + 1985, 1983, 1982, 1980, 1980, 1982, 1981, 1984, + 1986, 1986, 1986, 1986, 1984, 1982, 1984, 1987, + 1988, 1990, 1990, 1988, 1986, 1985, 1985, 1984, + 1983, 1983, 1984, 1986, 1986, 1986, 1986, 1986, + 1985, 1985, 1984, 1987, 1987, 1988, 1985, 1983, + 1981, 1979, 1980, 1976, 1974, 1977, 1978, 1979, + 1981, 1981, 1980, 1981, 1980, 1983, 1985, 1987, + 1986, 1984, 1983, 1981, 1980, 1978, 1980, 1978, + 1979, 1979, 1975, 1975, 1975, 1973, 1972, 1971, + 1971, 1969, 1971, 1970, 1970, 1969, 1966, 1964, + 1964, 1964, 1965, 1966, 1968, 1968, 1966, 1968, + 1967, 1967, 1968, 1964, 1962, 1964, 1962, 1963, + 1960, 1960, 1959, 1961, 1964, 1963, 1966, 1966, + 1968, 1969, 1971, 1968, 1967, 1969, 1969, 1969, + 1970, 1968, 1966, 1964, 1966, 1964, 1962, 1964, + 1964, 1962, 1961, 1961, 1958, 1957, 1958, 1958, + 1959, 1957, 1956, 1958, 1958, 1959, 1960, 1960, + 1961, 1960, 1961, 1958, 1958, 1956, 1955, 1954, + 1951, 1949, 1948, 1950, 1951, 1952, 1953, 1954, + 1955, 1955, 1956, 1957, 1958, 1956, 1954, 1954, + 1954, 1951, 1948, 1946, 1946, 1946, 1945, 1946, + 1946, 1946, 1946, 1946, 1946, 1946, 1945, 1943, + 1945, 1944, 1941, 1940, 1939, 1941, 1941, 1938, + 1939, 1941, 1944, 1941, 1941, 1939, 1938, 1939, + 1936, 1931, 1931, 1933, 1932, 1932, 1931, 1932, + 1933, 1933, 1934, 1934, 1936, 1937, 1934, 1935, + 1933, 1932, 1931, 1930, 1928, 1927, 1927, 1927, + 1928, 1930, 1928, 1928, 1930, 1930, 1930, 1930, + 1930, 1929, 1927, 1925, 1924, 1922, 1922, 1923, + 1918, 1917, 1915, 1916, 1917, 1916, 1916, 1915, + 1914, 1915, 1917, 1918, 1920, 1918, 1916, 1917, + 1916, 1914, 1912, 1913, 1914, 1913, 1914, 1914, + 1912, 1909, 1908, 1910, 1912, 1912, 1913, 1914, + 1914, 1913, 1912, 1914, 1914, 1915, 1914, 1913, + 1912, 1910, 1910, 1909, 1905, 1906, 1910, 1910, + 1910, 1906, 1908, 1905, 1903, 1906, 1908, 1908, + 1909, 1910, 1906, 1905, 1905, 1905, 1905, 1905, + 1907, 1907, 1908, 1910, 1911, 1911, 1909, 1910, + 1910, 1909, 1907, 1905, 1903, 1903, 1904, 1905, + 1907, 1905, 1905, 1906, 1906, 1907, 1909, 1909, + 1911, 1911, 1911, 1910, 1910, 1907, 1907, 1907, + 1906, 1905, 1903, 1902, 1905, 1903, 1906, 1907, + 1907, 1909, 1907, 1908, 1910, 1907, 1907, 1908, + 1908, 1905, 1904, 1903, 1903, 1903, 1904, 1905, + 1907, 1908, 1907, 1907, 1906, 1904, 1907, 1905, + 1905, 1906, 1903, 1902, 1901, 1901, 1901, 1898, + 1896, 1895, 1895, 1895, 1894, 1896, 1897, 1900, + 1896, 1896, 1898, 1897, 1898, 1901, 1900, 1899, + 1901, 1901, 1901, 1899, 1899, 1899, 1898, 1901, + 1903, 1904, 1904, 1905, 1906, 1905, 1903, 1903, + 1907, 1906, 1907, 1908, 1908, 1911, 1909, 1908, + 1911, 1911, 1913, 1916, 1917, 1915, 1915, 1913, + 1913, 1912, 1913, 1915, 1915, 1914, 1916, 1915, + 1917, 1918, 1916, 1918, 1920, 1920, 1922, 1921, + 1922, 1920, 1919, 1916, 1916, 1917, 1917, 1917, + 1918, 1921, 1920, 1921, 1919, 1920, 1922, 1921, + 1920, 1922, 1922, 1922, 1921, 1918, 1918, 1918, + 1919, 1919, 1919, 1919, 1919, 1920, 1920, 1925, + 1925, 1923, 1922, 1922, 1922, 1923, 1922, 1923, + 1922, 1919, 1919, 1919, 1919, 1920, 1919, 1921, + 1921, 1921, 1920, 1921, 1920, 1921, 1921, 1920, + 1921, 1924, 1924, 1923, 1922, 1923, 1921, 1923, + 1923, 1922, 1923, 1922, 1923, 1920, 1917, 1918, + 1916, 1917, 1921, 1922, 1922, 1923, 1925, 1925, + 1926, 1925, 1928, 1926, 1925, 1928, 1927, 1926, + 1926, 1925, 1925, 1925, 1922, 1923, 1923, 1925, + 1927, 1925, 1924, 1925, 1926, 1926, 1924, 1926, + 1924, 1922, 1925, 1925, 1925, 1925, 1925, 1926, + 1925, 1925, 1925, 1925, 1925, 1925, 1925, 1926, + 1927, 1926, 1926, 1926, 1926, 1926, 1927, 1926, + 1924, 1927, 1927, 1929, 1928, 1926, 1926, 1926, + 1925, 1926, 1926, 1927, 1931, 1932, 1932, 1932, + 1933, 1931, 1931, 1931, 1929, 1928, 1928, 1930, + 1931, 1931, 1931, 1931, 1931, 1929, 1932, 1932, + 1932, 1933, 1930, 1932, 1933, 1936, 1936, 1935, + 1933, 1932, 1930, 1931, 1931, 1932, 1932, 1932, + 1935, 1934, 1934, 1937, 1937, 1937, 1938, 1935, + 1935, 1935, 1935, 1936, 1937, 1937, 1939, 1941, + 1942, 1942, 1942, 1942, 1944, 1943, 1944, 1944, + 1943, 1943, 1944, 1946, 1949, 1949, 1947, 1947, + 1945, 1945, 1946, 1943, 1942, 1947, 1944, 1943, + 1942, 1942, 1943, 1944, 1945, 1946, 1949, 1949, + 1948, 1951, 1949, 1950, 1950, 1948, 1949, 1944, + 1945, 1946, 1946, 1946, 1944, 1945, 1949, 1950, + 1953, 1953, 1954, 1954, 1954, 1953, 1954, 1957, + 1955, 1957, 1958, 1956, 1955, 1953, 1953, 1952, + 1951, 1953, 1954, 1955, 1955, 1955, 1952, 1953, + 1954, 1951, 1953, 1952, 1953, 1956, 1957, 1957, + 1955, 1954, 1957, 1950, 1948, 1950, 1949, 1951, + 1950, 1947, 1946, 1943, 1943, 1942, 1942, 1944, + 1944, 1947, 1948, 1947, 1947, 1949, 1949, 1949, + 1951, 1950, 1946, 1945, 1945, 1945, 1942, 1939, + 1943, 1943, 1943, 1943, 1944, 1947, 1945, 1943, + 1944, 1946, 1947, 1949, 1949, 1948, 1949, 1951, + 1947, 1946, 1944, 1943, 1945, 1944, 1943, 1942, + 1940, 1940, 1939, 1940, 1941, 1939, 1939, 1939, + 1942, 1943, 1943, 1942, 1943, 1944, 1947, 1946, + 1946, 1948, 1946, 1944, 1943, 1941, 1941, 1940, + 1941, 1942, 1944, 1944, 1945, 1944, 1945, 1946, + 1943, 1945, 1945, 1946, 1944, 1945, 1945, 1947, + 1947, 1946, 1942, 1942, 1940, 1938, 1937, 1936, + 1936, 1936, 1936, 1936, 1936, 1937, 1937, 1939, + 1940, 1942, 1941, 1940, 1938, 1938, 1938, 1939, + 1938, 1935, 1936, 1935, 1934, 1934, 1933, 1934, + 1934, 1934, 1933, 1932, 1933, 1933, 1933, 1929, + 1928, 1929, 1929, 1928, 1928, 1929, 1927, 1928, + 1929, 1929, 1928, 1930, 1931, 1929, 1927, 1927, + 1925, 1926, 1926, 1928, 1928, 1927, 1925, 1923, + 1923, 1924, 1925, 1924, 1927, 1929, 1930, 1928, + 1927, 1929, 1928, 1927, 1927, 1927, 1926, 1927, + 1928, 1927, 1930, 1930, 1929, 1930, 1926, 1927, + 1929, 1932, 1933, 1933, 1931, 1929, 1927, 1927, + 1925, 1926, 1928, 1928, 1928, 1925, 1926, 1927, + 1929, 1929, 1932, 1931, 1930, 1929, 1928, 1928, + 1926, 1926, 1925, 1927, 1927, 1927, 1924, 1924, + 1923, 1923, 1922, 1923, 1925, 1921, 1921, 1920, + 1922, 1923, 1921, 1921, 1921, 1918, 1918, 1916, + 1916, 1915, 1914, 1913, 1913, 1913, 1911, 1910, + 1910, 1909, 1908, 1908, 1908, 1909, 1912, 1911, + 1909, 1909, 1907, 1908, 1910, 1907, 1907, 1906, + 1907, 1906, 1905, 1902, 1902, 1900, 1899, 1900, + 1900, 1901, 1901, 1901, 1902, 1902, 1901, 1901, + 1898, 1898, 1899, 1900, 1899, 1899, 1898, 1896, + 1895, 1895, 1893, 1892, 1893, 1890, 1890, 1889, + 1889, 1891, 1891, 1893, 1894, 1897, 1898, 1898, + 1897, 1899, 1898, 1897, 1897, 1896, 1896, 1895, + 1892, 1891, 1891, 1888, 1889, 1893, 1893, 1895, + 1895, 1896, 1899, 1902, 1900, 1899, 1899, 1900, + 1901, 1901, 1901, 1900, 1901, 1901, 1903, 1900, + 1902, 1903, 1904, 1902, 1902, 1903, 1902, 1901, + 1902, 1903, 1902, 1900, 1900, 1896, 1892, 1891, + 1897, 1899, 1902, 1908, 1907, 1914, 1916, 1917, + 1918, 1918, 1917, 1912, 1904, 1898, 1891, 1886, + 1885, 1884, 1886, 1885, 1888, 1894, 1900, 1911, + 1917, 1923, 1927, 1931, 1930, 1927, 1920, 1915, + 1911, 1902, 1894, 1887, 1883, 1883, 1887, 1891, + 1894, 1900, 1906, 1915, 1922, 1925, 1930, 1931, + 1931, 1925, 1921, 1915, 1907, 1901, 1898, 1895, + 1891, 1893, 1897, 1901, 1905, 1912, 1921, 1923, + 1929, 1934, 1936, 1937, 1934, 1932, 1928, 1924, + 1918, 1915, 1910, 1908, 1908, 1910, 1910, 1910, + 1914, 1918, 1922, 1925, 1928, 1927, 1929, 1927, + 1930, 1929, 1928, 1927, 1924, 1922, 1921, 1921, + 1921, 1921, 1918, 1918, 1920, 1920, 1920, 1920, + 1922, 1927, 1931, 1930, 1932, 1933, 1933, 1937, + 1935, 1935, 1935, 1932, 1930, 1929, 1928, 1926, + 1926, 1926, 1927, 1928, 1930, 1933, 1936, 1939, + 1941, 1945, 1945, 1947, 1946, 1942, 1939, 1935, + 1932, 1929, 1928, 1928, 1927, 1929, 1931, 1935, + 1936, 1938, 1939, 1942, 1945, 1946, 1949, 1949, + 1946, 1946, 1943, 1939, 1937, 1934, 1935, 1934, + 1934, 1934, 1933, 1935, 1938, 1940, 1942, 1942, + 1944, 1943, 1944, 1943, 1944, 1944, 1943, 1943, + 1942, 1941, 1941, 1941, 1941, 1941, 1942, 1943, + 1942, 1943, 1945, 1946, 1947, 1947, 1948, 1950, + 1949, 1948, 1947, 1945, 1947, 1949, 1949, 1948, + 1950, 1952, 1948, 1950, 1954, 1952, 1952, 1955, + 1955, 1956, 1956, 1955, 1957, 1956, 1956, 1957, + 1960, 1958, 1959, 1960, 1959, 1960, 1963, 1964, + 1963, 1963, 1962, 1964, 1964, 1964, 1964, 1965, + 1967, 1967, 1966, 1964, 1965, 1962, 1961, 1961, + 1962, 1960, 1962, 1961, 1961, 1962, 1963, 1966, + 1968, 1969, 1967, 1968, 1967, 1967, 1966, 1967, + 1969, 1967, 1968, 1966, 1967, 1967, 1968, 1966, + 1966, 1969, 1970, 1973, 1972, 1974, 1978, 1976, + 1976, 1977, 1979, 1978, 1975, 1974, 1972, 1972, + 1971, 1969, 1969, 1970, 1971, 1972, 1974, 1976, + 1979, 1980, 1979, 1980, 1981, 1982, 1982, 1982, + 1980, 1978, 1980, 1980, 1978, 1976, 1977, 1979, + 1979, 1977, 1978, 1979, 1981, 1982, 1986, 1987, + 1988, 1989, 1989, 1994, 1993, 1995, 1994, 1993, + 1993, 1994, 1997, 1997, 1995, 1993, 1993, 1993, + 1995, 1995, 1997, 1996, 2000, 2002, 2001, 2001, + 2000, 2002, 2002, 2001, 2000, 2001, 2001, 2000, + 2001, 1998, 1998, 1998, 1998, 1997, 1997, 1998, + 1996, 1996, 1997, 1998, 2000, 1999, 2000, 2000, + 2000, 2003, 2002, 2001, 2001, 2002, 2004, 2005, + 2002, 2001, 2001, 2001, 2001, 1998, 2000, 1999, + 2000, 2000, 1998, 1999, 2001, 2000, 2002, 2004, + 2005, 2007, 2006, 2006, 2004, 2004, 2004, 2003, + 2003, 2001, 2001, 2000, 2000, 1999, 1999, 1998, + 1996, 1998, 1998, 1998, 1996, 1997, 1996, 1994, + 1995, 1995, 1994, 1997, 1997, 1997, 2002, 2002, + 2000, 2000, 1999, 2000, 1998, 2000, 2001, 2001, + 2001, 1999, 1998, 1998, 1999, 1999, 1999, 2000, + 2003, 2006, 2006, 2008, 2006, 2004, 2006, 2007, + 2008, 2007, 2007, 2006, 2005, 2007, 2006, 2010, + 2009, 2007, 2008, 2010, 2011, 2011, 2012, 2013, + 2012, 2014, 2011, 2012, 2014, 2013, 2015, 2013, + 2015, 2013, 2012, 2014, 2014, 2012, 2013, 2010, + 2010, 2012, 2013, 2014, 2014, 2011, 2013, 2014, + 2013, 2011, 2010, 2011, 2009, 2009, 2008, 2008, + 2007, 2006, 2005, 2005, 2004, 2005, 2005, 2004, + 2004, 2003, 2003, 2004, 2006, 2007, 2008, 2007, + 2008, 2010, 2011, 2009, 2008, 2006, 2007, 2007, + 2007, 2005, 2005, 2006, 2005, 2007, 2009, 2008, + 2008, 2008, 2008, 2007, 2006, 2004, 2004, 2005, + 2004, 2004, 2003, 2003, 2002, 2002, 2001, 2000, + 2000, 1999, 2000, 1997, 2000, 2000, 1999, 1999, + 2000, 2002, 2002, 2004, 2003, 2003, 2003, 2003, + 2002, 2003, 2006, 2007, 2007, 2009, 2007, 2006, + 2005, 2005, 2004, 2002, 2001, 2001, 2002, 2000, + 1999, 1996, 1999, 2000, 1999, 2001, 2001, 2000, + 1998, 2000, 2001, 2001, 2001, 2001, 2000, 1999, + 1998, 1998, 2000, 2000, 2000, 1999, 1998, 1996, + 1994, 1992, 1992, 1993, 1994, 1993, 1995, 1994, + 1993, 1998, 1999, 1996, 1994, 1995, 1995, 1996, + 1994, 1994, 1995, 1995, 1994, 1994, 1992, 1992, + 1993, 1992, 1992, 1993, 1994, 1994, 1994, 1996, + 1996, 1996, 1996, 1996, 1995, 1997, 1997, 1998, + 2001, 2000, 2000, 1998, 1999, 2000, 1999, 2000, + 1999, 1998, 1998, 1997, 1999, 2001, 2000, 2000, + 2001, 1998, 1998, 1997, 1998, 1998, 1998, 1998, + 1998, 1997, 1994, 1995, 1997, 1997, 1995, 1996, + 1995, 1993, 1995, 1994, 1997, 1995, 1995, 1994, + 1997, 1997, 1996, 1998, 1999, 1998, 1997, 1999, + 1999, 1999, 1999, 1998, 1997, 1995, 1998, 1999, + 1999, 1997, 1998, 1999, 1998, 1999, 2000, 2000, + 1998, 1998, 1997, 1992, 1994, 1996, 1993, 1994, + 1993, 1995, 1995, 1997, 1994, 1995, 1995, 1995, + 1994, 1993, 1993, 1992, 1991, 1993, 1992, 1993, + 1992, 1991, 1993, 1991, 1992, 1992, 1991, 1992, + 1989, 1990, 1990, 1992, 1990, 1991, 1991, 1991, + 1989, 1991, 1989, 1990, 1989, 1990, 1991, 1990, + 1990, 1990, 1990, 1990, 1991, 1993, 1991, 1991, + 1991, 1992, 1993, 1994, 1993, 1994, 1994, 1994, + 1995, 1995, 2000, 2000, 1999, 2001, 2000, 1997, + 1999, 1998, 1996, 1997, 1996, 1996, 1996, 1995, + 1997, 1997, 1997, 1996, 1995, 1997, 1997, 1999, + 1999, 2000, 1999, 1999, 2000, 2001, 2000, 2002, + 2005, 2004, 2007, 2006, 2006, 2005, 2005, 2006, + 2006, 2008, 2007, 2008, 2009, 2009, 2011, 2013, + 2013, 2013, 2017, 2017, 2019, 2020, 2019, 2021, + 2021, 2021, 2022, 2022, 2023, 2022, 2024, 2023, + 2027, 2025, 2027, 2027, 2026, 2029, 2029, 2027, + 2029, 2030, 2029, 2029, 2031, 2029, 2028, 2030, + 2029, 2033, 2032, 2035, 2032, 2031, 2032, 2027, + 2031, 2030, 2029, 2030, 2030, 2029, 2030, 2034, + 2033, 2033, 2036, 2038, 2038, 2039, 2038, 2040, + 2040, 2041, 2040, 2040, 2039, 2040, 2040, 2043, + 2044, 2044, 2044, 2044, 2045, 2047, 2045, 2047, + 2048, 2047, 2048, 2048, 2049, 2051, 2051, 2051, + 2051, 2054, 2052, 2049, 2051, 2051, 2049, 2050, + 2050, 2050, 2052, 2050, 2052, 2052, 2051, 2051, + 2051, 2050, 2051, 2050, 2052, 2053, 2053, 2052, + 2054, 2053, 2052, 2053, 2054, 2052, 2056, 2057, + 2057, 2056, 2057, 2056, 2056, 2057, 2057, 2056, + 2056, 2056, 2059, 2058, 2058, 2059, 2059, 2059, + 2059, 2061, 2059, 2059, 2059, 2062, 2062, 2061, + 2062, 2061, 2062, 2063, 2063, 2064, 2064, 2064, + 2064, 2062, 2061, 2061, 2061, 2061, 2059, 2058, + 2059, 2061, 2062, 2059, 2059, 2061, 2060, 2059, + 2060, 2060, 2062, 2062, 2064, 2067, 2064, 2066, + 2067, 2066, 2066, 2066, 2067, 2067, 2066, 2066, + 2066, 2066, 2069, 2068, 2066, 2069, 2067, 2067, + 2069, 2069, 2070, 2069, 2071, 2072, 2074, 2072, + 2071, 2073, 2073, 2073, 2071, 2073, 2076, 2073, + 2071, 2072, 2074, 2072, 2075, 2073, 2074, 2077, + 2079, 2080, 2081, 2084, 2083, 2083, 2082, 2086, + 2087, 2086, 2086, 2086, 2088, 2089, 2088, 2088, + 2088, 2088, 2090, 2090, 2090, 2090, 2093, 2093, + 2093, 2094, 2093, 2097, 2098, 2096, 2096, 2094, + 2095, 2096, 2096, 2092, 2095, 2097, 2094, 2096, + 2095, 2097, 2097, 2095, 2095, 2097, 2097, 2097, + 2095, 2094, 2097, 2097, 2098, 2097, 2096, 2096, + 2096, 2099, 2100, 2100, 2098, 2099, 2099, 2099, + 2102, 2104, 2103, 2103, 2105, 2104, 2105, 2104, + 2106, 2107, 2107, 2106, 2107, 2109, 2110, 2110, + 2111, 2113, 2115, 2113, 2114, 2116, 2114, 2116, + 2113, 2114, 2112, 2112, 2112, 2111, 2114, 2114, + 2112, 2112, 2112, 2115, 2116, 2115, 2114, 2112, + 2113, 2114, 2114, 2114, 2114, 2114, 2114, 2112, + 2113, 2115, 2113, 2115, 2114, 2115, 2117, 2115, + 2116, 2116, 2117, 2118, 2116, 2116, 2117, 2117, + 2117, 2118, 2118, 2120, 2121, 2120, 2117, 2116, + 2118, 2120, 2121, 2120, 2120, 2122, 2121, 2124, + 2122, 2120, 2123, 2121, 2121, 2123, 2121, 2121, + 2121, 2119, 2119, 2118, 2115, 2117, 2119, 2117, + 2116, 2115, 2115, 2115, 2114, 2113, 2112, 2113, + 2111, 2111, 2111, 2112, 2110, 2111, 2111, 2111, + 2111, 2111, 2112, 2111, 2111, 2112, 2111, 2110, + 2111, 2113, 2113, 2111, 2111, 2109, 2110, 2109, + 2107, 2109, 2110, 2112, 2111, 2112, 2109, 2109, + 2110, 2110, 2109, 2112, 2112, 2110, 2108, 2108, + 2108, 2109, 2107, 2108, 2112, 2111, 2109, 2108, + 2109, 2111, 2112, 2108, 2106, 2107, 2108, 2107, + 2107, 2106, 2106, 2107, 2107, 2107, 2107, 2109, + 2109, 2112, 2111, 2108, 2106, 2108, 2108, 2105, + 2106, 2107, 2106, 2107, 2105, 2104, 2105, 2105, + 2104, 2104, 2103, 2102, 2101, 2100, 2098, 2099, + 2098, 2098, 2098, 2097, 2099, 2099, 2097, 2094, + 2095, 2097, 2094, 2094, 2090, 2092, 2093, 2093, + 2094, 2094, 2094, 2093, 2094, 2094, 2094, 2093, + 2090, 2093, 2092, 2089, 2092, 2091, 2092, 2088, + 2088, 2090, 2088, 2087, 2087, 2088, 2087, 2088, + 2086, 2087, 2087, 2088, 2089, 2085, 2085, 2086, + 2088, 2087, 2086, 2088, 2087, 2085, 2085, 2086, + 2087, 2086, 2085, 2084, 2085, 2085, 2087, 2089, + 2091, 2091, 2086, 2086, 2085, 2083, 2083, 2082, + 2081, 2084, 2085, 2085, 2082, 2081, 2082, 2080, + 2082, 2084, 2082, 2082, 2082, 2079, 2080, 2080, + 2079, 2078, 2077, 2076, 2076, 2075, 2076, 2076, + 2077, 2074, 2077, 2077, 2075, 2075, 2075, 2074, + 2074, 2074, 2075, 2075, 2072, 2073, 2071, 2072, + 2072, 2070, 2070, 2068, 2070, 2068, 2069, 2068, + 2067, 2068, 2069, 2066, 2063, 2065, 2067, 2065, + 2065, 2065, 2064, 2064, 2062, 2063, 2062, 2061, + 2061, 2060, 2063, 2060, 2059, 2058, 2055, 2058, + 2059, 2059, 2061, 2058, 2057, 2057, 2058, 2058, + 2058, 2057, 2056, 2054, 2054, 2055, 2056, 2058, + 2058, 2058, 2054, 2058, 2060, 2059, 2056, 2056, + 2055, 2056, 2058, 2057, 2057, 2057, 2056, 2056, + 2057, 2058, 2058, 2058, 2058, 2058, 2058, 2058, + 2059, 2059, 2059, 2060, 2061, 2060, 2059, 2059, + 2060, 2061, 2062, 2063, 2065, 2063, 2062, 2061, + 2062, 2063, 2064, 2064, 2061, 2061, 2062, 2065, + 2067, 2065, 2068, 2065, 2066, 2066, 2066, 2067, + 2068, 2069, 2070, 2068, 2068, 2068, 2066, 2066, + 2066, 2068, 2070, 2068, 2071, 2070, 2068, 2067, + 2066, 2068, 2069, 2068, 2067, 2069, 2067, 2067, + 2070, 2069, 2068, 2067, 2066, 2066, 2068, 2069, + 2069, 2069, 2069, 2071, 2071, 2069, 2070, 2070, + 2067, 2070, 2072, 2073, 2074, 2073, 2068, 2069, + 2071, 2073, 2075, 2077, 2080, 2078, 2079, 2078, + 2078, 2078, 2078, 2077, 2076, 2078, 2076, 2079, + 2079, 2079, 2078, 2079, 2080, 2079, 2081, 2080, + 2082, 2084, 2084, 2085, 2085, 2086, 2088, 2089, + 2087, 2087, 2088, 2090, 2090, 2090, 2091, 2092, + 2093, 2093, 2092, 2094, 2093, 2095, 2093, 2093, + 2093, 2094, 2093, 2095, 2096, 2097, 2095, 2092, + 2097, 2093, 2093, 2094, 2096, 2095, 2092, 2092, + 2093, 2093, 2093, 2095, 2093, 2092, 2092, 2090, + 2090, 2091, 2091, 2092, 2094, 2095, 2096, 2094, + 2096, 2097, 2094, 2097, 2096, 2094, 2096, 2096, + 2096, 2097, 2097, 2097, 2094, 2095, 2097, 2098, + 2100, 2099, 2099, 2099, 2098, 2100, 2100, 2097, + 2099, 2100, 2101, 2100, 2100, 2102, 2102, 2100, + 2100, 2100, 2102, 2103, 2106, 2104, 2102, 2101, + 2101, 2101, 2099, 2100, 2102, 2103, 2103, 2103, + 2102, 2101, 2103, 2105, 2104, 2106, 2104, 2105, + 2105, 2105, 2105, 2102, 2101, 2102, 2103, 2103, + 2103, 2102, 2101, 2102, 2103, 2101, 2105, 2102, + 2103, 2104, 2104, 2103, 2104, 2104, 2103, 2105, + 2103, 2102, 2103, 2103, 2105, 2104, 2101, 2100, + 2099, 2099, 2100, 2101, 2101, 2099, 2100, 2100, + 2101, 2103, 2104, 2104, 2105, 2103, 2103, 2104, + 2103, 2103, 2102, 2100, 2100, 2101, 2101, 2100, + 2101, 2099, 2098, 2099, 2099, 2102, 2101, 2099, + 2099, 2098, 2100, 2103, 2103, 2104, 2107, 2106, + 2108, 2107, 2105, 2107, 2104, 2104, 2105, 2105, + 2104, 2104, 2107, 2107, 2107, 2108, 2107, 2108, + 2108, 2109, 2110, 2111, 2112, 2111, 2110, 2110, + 2111, 2110, 2111, 2112, 2113, 2114, 2114, 2112, + 2112, 2112, 2116, 2116, 2115, 2116, 2116, 2118, + 2119, 2120, 2119, 2121, 2122, 2120, 2122, 2125, + 2125, 2124, 2124, 2125, 2124, 2123, 2123, 2123, + 2121, 2122, 2122, 2125, 2124, 2123, 2124, 2126, + 2123, 2125, 2126, 2126, 2125, 2125, 2124, 2125, + 2125, 2124, 2126, 2126, 2127, 2127, 2125, 2127, + 2126, 2128, 2128, 2126, 2127, 2129, 2129, 2131, + 2131, 2131, 2131, 2132, 2130, 2130, 2132, 2132, + 2132, 2130, 2132, 2132, 2134, 2136, 2136, 2137, + 2139, 2138, 2138, 2136, 2136, 2136, 2135, 2132, + 2133, 2132, 2133, 2133, 2132, 2134, 2132, 2133, + 2136, 2131, 2132, 2133, 2133, 2135, 2134, 2134, + 2133, 2132, 2132, 2133, 2135, 2133, 2133, 2132, + 2133, 2133, 2133, 2134, 2135, 2136, 2135, 2133, + 2135, 2137, 2136, 2136, 2137, 2136, 2139, 2138, + 2137, 2138, 2137, 2139, 2138, 2138, 2139, 2139, + 2137, 2137, 2139, 2136, 2132, 2134, 2134, 2132, + 2130, 2132, 2132, 2129, 2128, 2126, 2126, 2128, + 2129, 2128, 2127, 2128, 2128, 2127, 2129, 2130, + 2130, 2128, 2128, 2128, 2129, 2129, 2131, 2132, + 2130, 2128, 2129, 2130, 2128, 2127, 2128, 2128, + 2128, 2128, 2129, 2131, 2131, 2132, 2132, 2132, + 2131, 2132, 2131, 2130, 2130, 2132, 2131, 2127, + 2130, 2127, 2127, 2127, 2128, 2124, 2123, 2124, + 2124, 2124, 2124, 2125, 2124, 2122, 2121, 2121, + 2119, 2120, 2119, 2118, 2117, 2118, 2118, 2114, + 2114, 2113, 2113, 2115, 2112, 2114, 2114, 2111, + 2111, 2111, 2111, 2109, 2110, 2110, 2109, 2108, + 2111, 2113, 2110, 2110, 2107, 2109, 2108, 2106, + 2108, 2106, 2107, 2106, 2108, 2109, 2109, 2108, + 2108, 2109, 2108, 2107, 2110, 2108, 2104, 2103, + 2105, 2106, 2104, 2104, 2103, 2103, 2102, 2102, + 2102, 2103, 2103, 2101, 2102, 2101, 2103, 2106, + 2105, 2102, 2104, 2103, 2102, 2100, 2101, 2102, + 2099, 2101, 2102, 2104, 2102, 2101, 2101, 2101, + 2103, 2102, 2103, 2105, 2103, 2104, 2102, 2102 +}; diff --git a/keyboards/planck/keymaps/synth_wavetable/config.h b/keyboards/planck/keymaps/synth_wavetable/config.h new file mode 100644 index 00000000000..930b26b0001 --- /dev/null +++ b/keyboards/planck/keymaps/synth_wavetable/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2020 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#ifdef AUDIO_ENABLE + #define AUDIO_PIN A5 + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 2 + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 diff --git a/keyboards/planck/keymaps/synth_wavetable/keymap.c b/keyboards/planck/keymaps/synth_wavetable/keymap.c new file mode 100644 index 00000000000..a0d71067938 --- /dev/null +++ b/keyboards/planck/keymaps/synth_wavetable/keymap.c @@ -0,0 +1,320 @@ +/* Copyright 2019 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + BACKLIT, + EXT_PLV +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_planck_grid( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PLOVER] = LAYOUT_planck_grid( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef KEYBOARD_planck_rev5 + PORTE &= ~(1<<6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef KEYBOARD_planck_rev5 + PORTE |= (1<<6); + #endif + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_scan_user(void) { + +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} + +#include "wavetable.h" + +float dac_if[8] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0}; +uint8_t dac_morph = 0; + + +uint16_t dac_value_generate(void) { + uint16_t value = AUDIO_DAC_OFF_VALUE; + uint8_t active_tones = audio_get_number_of_active_tones(); + if (active_tones > AUDIO_MAX_SIMULTANEOUS_TONES) + active_tones = AUDIO_MAX_SIMULTANEOUS_TONES; + + if (active_tones > 0) { + uint16_t value_avg = 0; + for (uint8_t i = 0; i < active_tones; i++) { + dac_if[i] = dac_if[i] + + ((audio_get_frequency(i) * AUDIO_DAC_BUFFER_SIZE) / AUDIO_DAC_SAMPLE_RATE) + * 2/3; // necessary to adjust for the gpt-timer frequency (three times the sample rate) and the dac-conversion beeing called twice per sample + + // Needed because % doesn't work with floats + while (dac_if[i] >= (AUDIO_DAC_BUFFER_SIZE)) + dac_if[i] = dac_if[i] - AUDIO_DAC_BUFFER_SIZE; + + // #define AUDIO_DAC_MORPH_SPEED 372 + // #define AUDIO_DAC_MORPH_SPEED_COMPUTED (AUDIO_DAC_SAMPLE_RATE / AUDIO_DAC_WAVETABLE_CUSTOM_LENGTH * (1000 / AUDIO_DAC_MORPH_SPEED)) + + uint16_t dac_i = (uint16_t)dac_if[i]; + // value_avg += dac_buffer_custom[dac_morph_flipped][dac_i] / active_tones / 2 * ((dac_morph >= 63) ? 6400 - dac_morph_counter : dac_morph_counter) / 6400; + // value_avg += dac_buffer_custom[dac_morph_flipped + 1][dac_i] / active_tones / 2 * ((dac_morph >= 63) ? dac_morph_counter : 6400 - dac_morph_counter) / 6400; + + // value_avg += dac_wavetable_custom[dac_morph][dac_i] / active_tones / 2 * (AUDIO_DAC_MORPH_SPEED_COMPUTED - dac_morph_counter) / AUDIO_DAC_MORPH_SPEED_COMPUTED; + // value_avg += dac_wavetable_custom[dac_morph + 1][dac_i] / active_tones / 2 * dac_morph_counter / AUDIO_DAC_MORPH_SPEED_COMPUTED; + value_avg += dac_wavetable_custom[dac_morph][dac_i] / active_tones; + } + value = value_avg; + + // dac_morph_counter++; + // if (dac_morph_counter >= AUDIO_DAC_MORPH_SPEED_COMPUTED) { + // dac_morph_counter = 0; + // dac_morph = (dac_morph + 1) % 125; + // dac_morph_flipped = ((dac_morph >= 63) ? (125 - dac_morph) : dac_morph); + // dac_morph = (dac_morph + 1) % (AUDIO_DAC_WAVETABLE_CUSTOM_LENGTH - 1); + // } + } + return value; +} + +void encoder_update(bool clockwise) { + if (clockwise) { + dac_morph = (dac_morph + 1) % AUDIO_DAC_WAVETABLE_CUSTOM_LENGTH; + } else { + if (dac_morph == 0) + dac_morph = (AUDIO_DAC_WAVETABLE_CUSTOM_LENGTH - 1); + else + dac_morph--; + } +} diff --git a/keyboards/planck/keymaps/synth_wavetable/rules.mk b/keyboards/planck/keymaps/synth_wavetable/rules.mk new file mode 100644 index 00000000000..ebfcda22143 --- /dev/null +++ b/keyboards/planck/keymaps/synth_wavetable/rules.mk @@ -0,0 +1,2 @@ +AUDIO_ENABLE = yes +AUDIO_DRIVER = dac_additive diff --git a/keyboards/planck/keymaps/synth_wavetable/wavetable.h b/keyboards/planck/keymaps/synth_wavetable/wavetable.h new file mode 100644 index 00000000000..89a0eefcbb7 --- /dev/null +++ b/keyboards/planck/keymaps/synth_wavetable/wavetable.h @@ -0,0 +1,2197 @@ +/* +Copyright 2020 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#define AUDIO_DAC_WAVETABLE_CUSTOM_LENGTH 64 + +static const dacsample_t dac_wavetable_custom[64][256] = { + { + 3038, 4095, 3745, 3945, 3779, 3889, 3782, 3850, + 3775, 3817, 3766, 3788, 3755, 3762, 3743, 3738, + 3729, 3716, 3715, 3695, 3700, 3676, 3683, 3658, + 3667, 3642, 3649, 3626, 3632, 3611, 3614, 3596, + 3596, 3581, 3579, 3567, 3561, 3552, 3544, 3537, + 3528, 3522, 3511, 3507, 3495, 3491, 3479, 3476, + 3464, 3460, 3449, 3444, 3433, 3428, 3419, 3412, + 3404, 3397, 3389, 3382, 3374, 3366, 3359, 3351, + 3345, 3336, 3330, 3322, 3314, 3307, 3299, 3293, + 3285, 3279, 3270, 3265, 3255, 3251, 3241, 3237, + 3227, 3223, 3213, 3208, 3200, 3194, 3187, 3179, + 3173, 3165, 3161, 3150, 3149, 3136, 3137, 3121, + 3125, 3107, 3112, 3093, 3099, 3080, 3086, 3068, + 3072, 3056, 3058, 3045, 3043, 3036, 3027, 3027, + 3010, 3019, 2992, 3013, 2974, 3007, 2955, 3002, + 2935, 2999, 2913, 2998, 2886, 3006, 2842, 3067, + 2464, 221, 205, 228, 215, 260, 231, 285, + 249, 307, 270, 326, 291, 344, 313, 359, + 335, 374, 357, 388, 378, 403, 399, 416, + 419, 431, 438, 445, 457, 460, 475, 476, + 492, 492, 509, 508, 525, 524, 540, 541, + 555, 558, 571, 574, 586, 591, 601, 607, + 616, 624, 631, 639, 647, 656, 662, 671, + 677, 687, 692, 702, 708, 718, 723, 733, + 738, 748, 753, 763, 768, 777, 783, 792, + 798, 806, 812, 820, 827, 834, 842, 848, + 857, 862, 872, 875, 887, 888, 901, 902, + 915, 915, 929, 929, 943, 942, 956, 956, + 969, 971, 981, 986, 992, 1001, 1003, 1017, + 1013, 1032, 1023, 1048, 1033, 1064, 1043, 1079, + 1054, 1093, 1065, 1106, 1078, 1118, 1092, 1127, + 1109, 1132, 1130, 1132, 1160, 1118, 1217, 1036 + }, + { + 2048, 2049, 2056, 2071, 2096, 2130, 2174, 2225, + 2280, 2337, 2392, 2444, 2490, 2529, 2559, 2581, + 2593, 2597, 2594, 2589, 2585, 2588, 2603, 2635, + 2685, 2755, 2842, 2943, 3050, 3157, 3258, 3347, + 3423, 3485, 3535, 3577, 3612, 3641, 3665, 3682, + 3692, 3694, 3692, 3689, 3690, 3700, 3724, 3761, + 3811, 3867, 3924, 3972, 4005, 4019, 4013, 3993, + 3964, 3936, 3915, 3906, 3912, 3931, 3959, 3990, + 4020, 4043, 4059, 4067, 4068, 4063, 4051, 4030, + 3997, 3946, 3875, 3782, 3671, 3546, 3419, 3299, + 3197, 3120, 3072, 3053, 3062, 3091, 3133, 3180, + 3224, 3257, 3276, 3277, 3259, 3221, 3163, 3084, + 2986, 2870, 2741, 2607, 2474, 2351, 2245, 2161, + 2102, 2069, 2058, 2067, 2091, 2124, 2160, 2195, + 2222, 2239, 2245, 2238, 2219, 2191, 2155, 2116, + 2077, 2042, 2014, 1995, 1987, 1991, 2003, 2023, + 2048, 2074, 2101, 2124, 2144, 2158, 2166, 2170, + 2172, 2175, 2181, 2195, 2221, 2260, 2315, 2384, + 2465, 2555, 2648, 2740, 2826, 2903, 2971, 3029, + 3076, 3114, 3142, 3159, 3167, 3167, 3160, 3153, + 3150, 3157, 3180, 3222, 3283, 3362, 3452, 3546, + 3636, 3715, 3777, 3823, 3854, 3874, 3889, 3905, + 3923, 3944, 3968, 3989, 4007, 4019, 4026, 4030, + 4033, 4040, 4051, 4066, 4081, 4090, 4086, 4063, + 4019, 3956, 3878, 3794, 3716, 3651, 3606, 3586, + 3589, 3612, 3647, 3688, 3728, 3760, 3781, 3787, + 3780, 3757, 3718, 3661, 3584, 3485, 3366, 3230, + 3085, 2938, 2801, 2683, 2589, 2525, 2492, 2486, + 2503, 2537, 2580, 2624, 2663, 2691, 2703, 2698, + 2674, 2633, 2574, 2500, 2415, 2322, 2228, 2139, + 2059, 1994, 1945, 1914, 1900, 1901, 1913, 1933, + 1957, 1983, 2006, 2025, 2038, 2046, 2049, 2048 + }, + { + 2048, 2053, 2074, 2119, 2191, 2291, 2416, 2559, + 2710, 2860, 3000, 3124, 3225, 3301, 3350, 3371, + 3364, 3334, 3288, 3234, 3182, 3144, 3127, 3137, + 3173, 3231, 3304, 3378, 3441, 3483, 3495, 3475, + 3423, 3344, 3243, 3128, 3002, 2867, 2726, 2581, + 2433, 2286, 2142, 2001, 1865, 1731, 1597, 1460, + 1317, 1171, 1023, 881, 750, 637, 546, 476, + 423, 380, 341, 300, 254, 205, 154, 109, + 75, 56, 55, 72, 105, 153, 217, 296, + 395, 513, 651, 806, 972, 1139, 1299, 1444, + 1572, 1680, 1772, 1855, 1935, 2018, 2110, 2212, + 2323, 2442, 2563, 2680, 2786, 2877, 2944, 2982, + 2986, 2951, 2877, 2771, 2640, 2498, 2360, 2238, + 2145, 2087, 2069, 2088, 2140, 2215, 2303, 2392, + 2469, 2524, 2550, 2543, 2505, 2437, 2346, 2241, + 2132, 2031, 1949, 1893, 1870, 1878, 1915, 1974, + 2048, 2128, 2206, 2276, 2332, 2371, 2394, 2402, + 2403, 2404, 2417, 2449, 2510, 2603, 2728, 2882, + 3056, 3236, 3410, 3564, 3690, 3783, 3842, 3868, + 3864, 3833, 3777, 3700, 3604, 3495, 3378, 3261, + 3150, 3048, 2958, 2877, 2801, 2723, 2637, 2536, + 2420, 2289, 2146, 1997, 1847, 1698, 1552, 1410, + 1271, 1133, 999, 870, 748, 637, 536, 446, + 364, 288, 216, 150, 92, 49, 29, 37, + 76, 144, 235, 339, 444, 541, 623, 689, + 741, 784, 826, 874, 933, 1009, 1101, 1209, + 1330, 1461, 1598, 1739, 1877, 2007, 2123, 2219, + 2291, 2338, 2364, 2374, 2378, 2385, 2404, 2443, + 2503, 2585, 2684, 2794, 2904, 3004, 3084, 3136, + 3154, 3133, 3070, 2965, 2823, 2650, 2458, 2261, + 2075, 1914, 1787, 1701, 1656, 1649, 1675, 1726, + 1791, 1861, 1927, 1981, 2020, 2043, 2051, 2050 + }, + { + 2048, 2051, 2065, 2095, 2144, 2212, 2298, 2397, + 2504, 2612, 2716, 2811, 2894, 2961, 3011, 3042, + 3055, 3052, 3036, 3014, 2996, 2988, 3001, 3040, + 3108, 3204, 3324, 3459, 3598, 3728, 3841, 3930, + 3992, 4029, 4045, 4045, 4032, 4009, 3975, 3930, + 3874, 3809, 3738, 3665, 3596, 3534, 3481, 3436, + 3397, 3357, 3312, 3255, 3184, 3099, 3003, 2900, + 2795, 2693, 2595, 2503, 2413, 2325, 2235, 2143, + 2048, 1950, 1850, 1750, 1651, 1554, 1460, 1370, + 1287, 1215, 1159, 1122, 1105, 1107, 1124, 1147, + 1168, 1179, 1172, 1143, 1091, 1019, 931, 836, + 741, 655, 584, 535, 510, 514, 549, 618, + 721, 856, 1019, 1201, 1388, 1569, 1730, 1862, + 1956, 2012, 2029, 2013, 1971, 1911, 1844, 1779, + 1725, 1690, 1676, 1686, 1719, 1771, 1838, 1913, + 1989, 2059, 2115, 2152, 2167, 2161, 2136, 2097, + 2048, 1994, 1942, 1894, 1856, 1829, 1813, 1805, + 1803, 1800, 1788, 1762, 1715, 1643, 1544, 1420, + 1276, 1120, 962, 811, 675, 558, 463, 390, + 337, 304, 290, 294, 316, 353, 399, 447, + 489, 517, 526, 513, 479, 430, 375, 322, + 283, 264, 269, 297, 345, 405, 473, 542, + 612, 682, 754, 829, 910, 996, 1086, 1179, + 1273, 1366, 1459, 1553, 1649, 1747, 1848, 1949, + 2048, 2141, 2227, 2305, 2375, 2440, 2505, 2574, + 2649, 2733, 2825, 2923, 3023, 3122, 3215, 3300, + 3373, 3433, 3476, 3499, 3496, 3465, 3403, 3313, + 3200, 3073, 2945, 2829, 2735, 2672, 2644, 2652, + 2691, 2756, 2836, 2921, 3000, 3062, 3101, 3111, + 3090, 3036, 2950, 2835, 2695, 2539, 2375, 2214, + 2069, 1947, 1855, 1795, 1766, 1765, 1786, 1824, + 1871, 1920, 1965, 2003, 2029, 2044, 2050, 2049 + }, + { + 2048, 2061, 2117, 2228, 2396, 2610, 2844, 3065, + 3240, 3343, 3358, 3283, 3125, 2900, 2629, 2337, + 2048, 1783, 1558, 1379, 1241, 1136, 1049, 971, + 900, 843, 815, 838, 930, 1103, 1358, 1680, + 2048, 2435, 2816, 3170, 3479, 3729, 3908, 4008, + 4025, 3959, 3819, 3616, 3364, 3076, 2757, 2413, + 2048, 1667, 1285, 922, 601, 347, 175, 92, + 93, 168, 304, 490, 722, 998, 1315, 1668, + 2048, 2437, 2818, 3173, 3483, 3736, 3919, 4021, + 4035, 3956, 3788, 3544, 3247, 2924, 2605, 2309, + 2048, 1819, 1614, 1422, 1234, 1050, 878, 733, + 633, 597, 635, 751, 939, 1186, 1471, 1768, + 2048, 2280, 2443, 2523, 2523, 2457, 2354, 2241, + 2146, 2087, 2067, 2081, 2113, 2142, 2149, 2118, + 2048, 1944, 1824, 1711, 1629, 1601, 1637, 1740, + 1896, 2080, 2261, 2404, 2481, 2478, 2394, 2243, + 2048, 1835, 1634, 1468, 1354, 1299, 1300, 1342, + 1408, 1479, 1540, 1586, 1625, 1670, 1744, 1865, + 2048, 2292, 2585, 2903, 3215, 3491, 3707, 3846, + 3899, 3864, 3745, 3550, 3296, 2999, 2682, 2360, + 2048, 1749, 1462, 1186, 917, 661, 432, 250, + 137, 112, 184, 351, 600, 912, 1268, 1651, + 2048, 2444, 2828, 3184, 3496, 3749, 3932, 4040, + 4072, 4031, 3919, 3739, 3493, 3185, 2828, 2441, + 2048, 1675, 1346, 1074, 862, 705, 592, 516, + 476, 475, 524, 632, 806, 1046, 1343, 1684, + 2048, 2412, 2755, 3051, 3279, 3421, 3468, 3421, + 3295, 3116, 2914, 2717, 2543, 2398, 2277, 2166, + 2048, 1909, 1744, 1557, 1361, 1178, 1031, 940, + 919, 975, 1102, 1284, 1497, 1708, 1886, 2004, + 2048, 2018, 1931, 1812, 1689, 1590, 1536, 1534, + 1585, 1676, 1786, 1894, 1981, 2035, 2056, 2053 + }, + { + 2048, 2072, 2162, 2326, 2531, 2717, 2808, 2744, + 2504, 2112, 1636, 1162, 781, 560, 536, 708, + 1040, 1468, 1922, 2340, 2681, 2929, 3082, 3144, + 3108, 2958, 2676, 2261, 1739, 1174, 654, 273, + 103, 179, 496, 1009, 1653, 2344, 2997, 3529, + 3874, 3994, 3882, 3563, 3082, 2497, 1866, 1246, + 698, 284, 64, 82, 347, 829, 1459, 2145, + 2795, 3334, 3712, 3900, 3885, 3668, 3262, 2702, + 2048, 1375, 770, 310, 56, 39, 261, 696, + 1287, 1952, 2594, 3120, 3458, 3578, 3497, 3260, + 2927, 2549, 2159, 1774, 1409, 1084, 836, 709, + 741, 951, 1327, 1819, 2353, 2844, 3211, 3395, + 3374, 3170, 2846, 2488, 2179, 1975, 1891, 1901, + 1956, 2008, 2027, 2015, 1996, 2006, 2073, 2203, + 2370, 2529, 2630, 2636, 2539, 2368, 2176, 2032, + 1989, 2070, 2251, 2471, 2649, 2712, 2622, 2385, + 2048, 1681, 1362, 1153, 1086, 1157, 1334, 1565, + 1803, 2019, 2207, 2378, 2545, 2706, 2837, 2892, + 2819, 2583, 2185, 1674, 1130, 653, 328, 216, + 337, 675, 1182, 1782, 2392, 2928, 3328, 3557, + 3606, 3490, 3229, 2845, 2359, 1803, 1223, 690, + 283, 77, 118, 409, 910, 1551, 2247, 2916, + 3483, 3886, 4077, 4031, 3750, 3266, 2640, 1948, + 1273, 689, 261, 35, 43, 291, 753, 1368, + 2048, 2691, 3210, 3550, 3691, 3645, 3437, 3096, + 2649, 2126, 1569, 1033, 587, 298, 216, 362, + 722, 1248, 1866, 2486, 3015, 3375, 3519, 3446, + 3200, 2855, 2490, 2166, 1911, 1723, 1584, 1478, + 1404, 1379, 1435, 1593, 1858, 2201, 2566, 2885, + 3090, 3140, 3027, 2785, 2480, 2196, 2006, 1951, + 2026, 2183, 2350, 2459, 2469, 2375, 2208, 2022, + 1871, 1793, 1798, 1865, 1955, 2028, 2061, 2057 + }, + { + 2048, 1736, 1511, 1423, 1476, 1630, 1822, 1987, + 2083, 2101, 2063, 2006, 1968, 1967, 2000, 2045, + 2073, 2061, 2011, 1944, 1899, 1908, 1981, 2099, + 2218, 2291, 2292, 2226, 2129, 2054, 2044, 2111, + 2237, 2375, 2471, 2480, 2385, 2198, 1962, 1735, + 1574, 1515, 1563, 1694, 1861, 2022, 2148, 2232, + 2282, 2305, 2299, 2254, 2154, 1996, 1798, 1599, + 1449, 1393, 1464, 1664, 1967, 2319, 2651, 2890, + 2979, 2896, 2660, 2325, 1964, 1648, 1430, 1334, + 1360, 1494, 1707, 1967, 2238, 2480, 2658, 2740, + 2709, 2561, 2310, 1987, 1639, 1327, 1114, 1056, + 1181, 1476, 1889, 2335, 2720, 2967, 3034, 2923, + 2673, 2345, 2010, 1727, 1537, 1455, 1475, 1580, + 1747, 1955, 2184, 2411, 2607, 2733, 2751, 2632, + 2378, 2025, 1643, 1320, 1132, 1123, 1287, 1573, + 1902, 2192, 2386, 2461, 2433, 2339, 2225, 2123, + 2048, 1993, 1946, 1898, 1854, 1834, 1865, 1966, + 2133, 2334, 2512, 2611, 2593, 2463, 2263, 2058, + 1913, 1862, 1902, 1996, 2088, 2130, 2099, 2001, + 1871, 1755, 1694, 1710, 1795, 1918, 2036, 2111, + 2130, 2104, 2062, 2034, 2032, 2044, 2044, 2008, + 1930, 1832, 1756, 1745, 1830, 2008, 2250, 2502, + 2700, 2790, 2741, 2556, 2273, 1955, 1672, 1483, + 1414, 1463, 1600, 1789, 1998, 2202, 2383, 2519, + 2590, 2574, 2460, 2253, 1979, 1682, 1414, 1233, + 1183, 1291, 1551, 1925, 2344, 2723, 2981, 3065, + 2964, 2707, 2356, 1983, 1656, 1424, 1315, 1335, + 1468, 1686, 1950, 2223, 2467, 2652, 2748, 2736, + 2601, 2347, 2004, 1624, 1283, 1058, 1009, 1154, + 1466, 1873, 2285, 2614, 2801, 2826, 2710, 2501, + 2259, 2036, 1862, 1751, 1697, 1692, 1733, 1822, + 1963, 2154, 2374, 2582, 2721, 2742, 2619, 2369 + }, + { + 2048, 2099, 2228, 2259, 1999, 1514, 1195, 1450, + 2280, 3163, 3424, 2780, 1605, 678, 618, 1447, + 2593, 3312, 3203, 2425, 1510, 990, 1120, 1807, + 2685, 3258, 3119, 2226, 1045, 353, 712, 2001, + 3423, 4031, 3396, 1899, 483, 41, 848, 2389, + 3692, 3949, 3033, 1544, 405, 291, 1255, 2722, + 3811, 3831, 2719, 1136, 90, 268, 1555, 3114, + 3964, 3614, 2324, 895, 183, 617, 1954, 3388, + 4020, 3424, 1949, 514, 27, 798, 2345, 3693, + 3997, 3089, 1590, 481, 425, 1338, 2538, 3274, + 3197, 2470, 1563, 978, 1033, 1728, 2698, 3356, + 3224, 2300, 1137, 500, 836, 1934, 3058, 3478, + 2986, 2018, 1282, 1194, 1621, 2108, 2314, 2242, + 2102, 2039, 2030, 2009, 2004, 2101, 2286, 2386, + 2222, 1832, 1496, 1506, 1876, 2312, 2478, 2313, + 2077, 2067, 2276, 2385, 2108, 1542, 1143, 1321, + 2048, 2836, 3127, 2729, 1951, 1338, 1247, 1633, + 2172, 2537, 2581, 2321, 1874, 1441, 1300, 1669, + 2465, 3215, 3317, 2530, 1269, 374, 507, 1646, + 3076, 3872, 3523, 2269, 928, 339, 820, 2008, + 3150, 3579, 3074, 1933, 812, 393, 1006, 2361, + 3636, 3973, 3084, 1503, 242, 106, 1176, 2779, + 3923, 3906, 2735, 1128, 88, 267, 1552, 3134, + 4033, 3701, 2345, 796, 14, 497, 1947, 3438, + 4019, 3364, 1958, 721, 380, 1054, 2279, 3324, + 3589, 2905, 1647, 566, 367, 1237, 2668, 3752, + 3780, 2721, 1257, 332, 511, 1607, 2838, 3413, + 3085, 2234, 1489, 1248, 1506, 2001, 2450, 2652, + 2503, 2030, 1460, 1167, 1432, 2176, 2932, 3161, + 2674, 1808, 1170, 1163, 1680, 2239, 2430, 2258, + 2059, 2108, 2334, 2426, 2195, 1777, 1510, 1606, + 1957, 2266, 2327, 2193, 2057, 2033, 2068, 2069 + }, + { + 2048, 2119, 2229, 2372, 2541, 2724, 2909, 3085, + 3240, 3368, 3466, 3533, 3571, 3581, 3566, 3529, + 3473, 3403, 3326, 3251, 3188, 3144, 3128, 3145, + 3195, 3276, 3382, 3503, 3628, 3747, 3850, 3932, + 3992, 4032, 4055, 4067, 4071, 4069, 4061, 4047, + 4025, 3996, 3965, 3934, 3910, 3898, 3902, 3922, + 3956, 3998, 4040, 4074, 4093, 4093, 4074, 4041, + 4002, 3964, 3935, 3920, 3921, 3936, 3961, 3991, + 4020, 4044, 4062, 4073, 4078, 4078, 4073, 4060, + 4035, 3994, 3932, 3848, 3744, 3626, 3504, 3389, + 3291, 3220, 3180, 3174, 3198, 3247, 3313, 3388, + 3462, 3527, 3577, 3607, 3615, 3598, 3553, 3479, + 3374, 3240, 3081, 2904, 2720, 2541, 2379, 2245, + 2146, 2087, 2069, 2088, 2140, 2218, 2311, 2410, + 2503, 2580, 2633, 2654, 2639, 2585, 2492, 2361, + 2199, 2014, 1817, 1619, 1435, 1273, 1142, 1045, + 984, 959, 967, 1005, 1067, 1148, 1238, 1328, + 1408, 1468, 1498, 1493, 1450, 1369, 1254, 1113, + 956, 796, 643, 508, 397, 311, 251, 214, + 196, 195, 211, 240, 283, 334, 391, 445, + 489, 515, 519, 496, 449, 380, 299, 215, + 137, 74, 31, 7, 0, 3, 10, 16, + 18, 14, 8, 2, 0, 2, 8, 16, + 23, 25, 22, 13, 4, 0, 7, 31, + 76, 139, 215, 296, 371, 432, 472, 486, + 476, 445, 398, 345, 291, 244, 207, 183, + 172, 177, 199, 241, 305, 395, 510, 648, + 800, 958, 1109, 1242, 1347, 1416, 1448, 1443, + 1404, 1338, 1255, 1164, 1077, 1002, 947, 918, + 919, 954, 1024, 1129, 1268, 1436, 1624, 1822, + 2017, 2197, 2351, 2472, 2554, 2597, 2602, 2571, + 2510, 2427, 2331, 2232, 2141, 2070, 2027, 2018 + }, + { + 2048, 2055, 2083, 2142, 2236, 2366, 2526, 2705, + 2891, 3068, 3227, 3358, 3455, 3515, 3537, 3522, + 3473, 3396, 3302, 3199, 3101, 3015, 2946, 2896, + 2859, 2827, 2789, 2734, 2652, 2541, 2399, 2232, + 2048, 1853, 1656, 1461, 1273, 1094, 929, 779, + 649, 541, 454, 384, 327, 277, 229, 182, + 139, 106, 93, 108, 158, 244, 363, 506, + 666, 832, 999, 1165, 1330, 1499, 1674, 1857, + 2048, 2243, 2440, 2635, 2825, 3005, 3173, 3324, + 3453, 3552, 3614, 3635, 3614, 3558, 3476, 3382, + 3291, 3215, 3159, 3125, 3110, 3105, 3100, 3084, + 3048, 2986, 2897, 2783, 2647, 2497, 2341, 2188, + 2048, 1931, 1846, 1799, 1790, 1815, 1863, 1922, + 1978, 2017, 2030, 2012, 1962, 1885, 1789, 1687, + 1592, 1517, 1473, 1467, 1501, 1574, 1678, 1805, + 1940, 2069, 2176, 2249, 2282, 2272, 2224, 2146, + 2048, 1941, 1837, 1745, 1672, 1623, 1598, 1591, + 1596, 1599, 1590, 1558, 1495, 1398, 1269, 1117, + 956, 802, 670, 575, 523, 516, 554, 630, + 738, 873, 1027, 1196, 1372, 1550, 1724, 1890, + 2048, 2198, 2346, 2498, 2659, 2833, 3019, 3210, + 3398, 3573, 3724, 3847, 3939, 4004, 4046, 4069, + 4078, 4071, 4048, 4005, 3939, 3852, 3743, 3618, + 3479, 3331, 3173, 3006, 2830, 2642, 2446, 2245, + 2048, 1860, 1690, 1539, 1406, 1286, 1172, 1057, + 936, 808, 676, 546, 425, 322, 242, 192, + 172, 186, 235, 319, 438, 590, 769, 965, + 1166, 1356, 1526, 1668, 1779, 1864, 1931, 1988, + 2048, 2117, 2202, 2304, 2419, 2541, 2659, 2764, + 2845, 2893, 2899, 2857, 2767, 2633, 2463, 2272, + 2078, 1899, 1750, 1642, 1579, 1563, 1587, 1643, + 1721, 1807, 1890, 1961, 2012, 2041, 2052, 2050 + }, + { + 2048, 2060, 2109, 2207, 2360, 2560, 2787, 3015, + 3217, 3368, 3451, 3458, 3391, 3257, 3067, 2840, + 2593, 2344, 2110, 1900, 1717, 1554, 1404, 1253, + 1093, 924, 753, 596, 475, 410, 418, 507, + 673, 905, 1189, 1509, 1849, 2196, 2537, 2858, + 3146, 3391, 3587, 3732, 3830, 3884, 3899, 3876, + 3811, 3695, 3524, 3294, 3012, 2689, 2345, 1999, + 1666, 1358, 1077, 824, 599, 404, 246, 133, + 75, 80, 151, 285, 478, 721, 1006, 1323, + 1660, 2000, 2324, 2612, 2847, 3019, 3127, 3181, + 3197, 3192, 3179, 3165, 3148, 3119, 3064, 2972, + 2833, 2647, 2419, 2162, 1894, 1634, 1404, 1223, + 1109, 1072, 1113, 1222, 1379, 1556, 1726, 1867, + 1965, 2019, 2035, 2029, 2021, 2027, 2060, 2127, + 2222, 2333, 2441, 2526, 2569, 2558, 2487, 2361, + 2197, 2016, 1849, 1723, 1659, 1666, 1742, 1876, + 2048, 2234, 2412, 2562, 2670, 2729, 2742, 2718, + 2674, 2627, 2591, 2574, 2575, 2583, 2581, 2548, + 2465, 2322, 2116, 1859, 1568, 1267, 977, 719, + 508, 354, 266, 245, 291, 396, 550, 737, + 945, 1165, 1394, 1634, 1891, 2170, 2472, 2790, + 3109, 3408, 3667, 3870, 4007, 4077, 4082, 4030, + 3923, 3765, 3559, 3306, 3013, 2689, 2347, 1998, + 1653, 1320, 1006, 719, 468, 266, 126, 61, + 76, 167, 322, 524, 752, 993, 1237, 1486, + 1741, 2008, 2289, 2582, 2875, 3157, 3411, 3623, + 3780, 3872, 3893, 3841, 3715, 3523, 3282, 3013, + 2740, 2489, 2276, 2107, 1979, 1879, 1791, 1699, + 1592, 1467, 1331, 1196, 1082, 1005, 980, 1015, + 1109, 1256, 1438, 1635, 1821, 1973, 2068, 2097, + 2059, 1967, 1844, 1713, 1601, 1526, 1499, 1525, + 1594, 1694, 1805, 1908, 1988, 2036, 2055, 2053 + }, + { + 2048, 2072, 2095, 2075, 2062, 2149, 2347, 2534, + 2584, 2527, 2537, 2732, 3017, 3166, 3074, 2884, + 2844, 3021, 3223, 3212, 2982, 2782, 2838, 3104, + 3321, 3317, 3206, 3252, 3548, 3896, 4028, 3910, + 3782, 3875, 4095, 4095, 4095, 3855, 3719, 3863, + 4080, 4065, 3759, 3424, 3355, 3556, 3739, 3649, + 3342, 3105, 3136, 3332, 3412, 3231, 2919, 2715, + 2707, 2768, 2724, 2551, 2362, 2259, 2219, 2157, + 2048, 1944, 1881, 1811, 1665, 1473, 1350, 1361, + 1417, 1359, 1150, 949, 947, 1145, 1329, 1300, + 1095, 955, 1044, 1254, 1316, 1103, 782, 627, + 713, 835, 759, 498, 306, 386, 653, 834, + 792, 690, 804, 1192, 1608, 1771, 1678, 1603, + 1778, 2118, 2309, 2159, 1822, 1629, 1734, 1954, + 1990, 1762, 1493, 1456, 1681, 1943, 2022, 1925, + 1847, 1930, 2119, 2249, 2238, 2153, 2095, 2080, + 2048, 1973, 1912, 1915, 1938, 1892, 1763, 1668, + 1723, 1885, 1968, 1842, 1593, 1438, 1481, 1578, + 1487, 1150, 775, 614, 689, 765, 627, 325, + 123, 191, 407, 501, 366, 185, 212, 466, + 698, 671, 436, 273, 366, 584, 630, 389, + 77, 8, 248, 539, 586, 384, 215, 329, + 667, 935, 929, 753, 682, 863, 1169, 1364, + 1361, 1292, 1331, 1505, 1700, 1812, 1863, 1934, + 2048, 2147, 2196, 2244, 2360, 2521, 2615, 2582, + 2519, 2589, 2834, 3096, 3182, 3084, 3009, 3147, + 3446, 3657, 3604, 3387, 3271, 3380, 3552, 3521, + 3228, 2893, 2770, 2865, 2939, 2800, 2540, 2436, + 2621, 2923, 3052, 2930, 2780, 2860, 3153, 3370, + 3268, 2930, 2671, 2689, 2844, 2820, 2484, 2039, + 1804, 1875, 2038, 2026, 1804, 1593, 1602, 1812, + 2013, 2049, 1961, 1906, 1958, 2053, 2091, 2066 + }, + { + 2048, 2070, 2146, 2287, 2483, 2702, 2900, 3027, + 3040, 2918, 2664, 2307, 1895, 1485, 1132, 876, + 736, 714, 794, 950, 1160, 1403, 1672, 1964, + 2279, 2614, 2955, 3279, 3551, 3731, 3784, 3687, + 3434, 3043, 2547, 1997, 1446, 948, 545, 265, + 123, 122, 252, 500, 850, 1280, 1768, 2284, + 2795, 3265, 3654, 3930, 4065, 4046, 3875, 3567, + 3152, 2664, 2143, 1626, 1146, 731, 405, 187, + 94, 136, 319, 637, 1073, 1592, 2150, 2693, + 3169, 3530, 3746, 3807, 3720, 3514, 3223, 2886, + 2537, 2196, 1875, 1578, 1306, 1063, 862, 723, + 671, 729, 908, 1201, 1584, 2009, 2421, 2763, + 2992, 3084, 3043, 2896, 2687, 2466, 2275, 2142, + 2070, 2044, 2037, 2021, 1974, 1892, 1789, 1690, + 1628, 1627, 1697, 1828, 1989, 2140, 2238, 2252, + 2173, 2016, 1819, 1633, 1508, 1484, 1577, 1776, + 2048, 2343, 2610, 2807, 2911, 2919, 2849, 2726, + 2581, 2434, 2291, 2147, 1986, 1794, 1565, 1306, + 1043, 816, 670, 645, 766, 1034, 1430, 1909, + 2417, 2895, 3293, 3576, 3726, 3744, 3643, 3442, + 3162, 2819, 2430, 2008, 1570, 1139, 742, 413, + 189, 97, 158, 374, 732, 1201, 1741, 2303, + 2842, 3316, 3692, 3947, 4067, 4047, 3887, 3596, + 3191, 2697, 2150, 1590, 1066, 621, 297, 117, + 94, 220, 475, 826, 1240, 1683, 2127, 2551, + 2937, 3270, 3535, 3711, 3780, 3723, 3531, 3209, + 2779, 2282, 1770, 1302, 930, 693, 608, 664, + 834, 1076, 1345, 1606, 1836, 2031, 2199, 2355, + 2509, 2665, 2811, 2922, 2971, 2931, 2792, 2562, + 2271, 1966, 1698, 1514, 1444, 1491, 1632, 1826, + 2020, 2164, 2228, 2200, 2097, 1953, 1809, 1705, + 1663, 1689, 1767, 1869, 1964, 2029, 2055, 2053 + }, + { + 2048, 2561, 2882, 1925, 1133, 2097, 3797, 4088, + 2776, 1767, 2291, 3280, 3257, 2487, 2059, 2126, + 2101, 1630, 1064, 1182, 1941, 2104, 1196, 546, + 1140, 2073, 2181, 1769, 1821, 2365, 2600, 2511, + 2925, 3644, 3507, 2704, 2607, 3268, 3505, 3065, + 2629, 2418, 2195, 2003, 2003, 1859, 1066, 110, + 157, 1030, 1220, 450, 80, 694, 1448, 1721, + 1786, 2100, 2633, 2799, 2270, 1758, 2203, 3394, + 4094, 3495, 2357, 2200, 3036, 3279, 2512, 2047, + 2132, 1482, 103, 0, 966, 2027, 1434, 250, + 475, 1883, 2525, 1973, 1589, 1913, 2175, 1995, + 1842, 2221, 3014, 3437, 3043, 2581, 2900, 3549, + 3502, 2694, 2013, 1982, 2001, 1505, 1262, 2009, + 2685, 2173, 1503, 2031, 3013, 2982, 2080, 1531, + 1740, 2035, 2040, 2150, 2357, 2095, 1711, 2170, + 3093, 3197, 2417, 1724, 1547, 1653, 1797, 1905, + 2048, 2242, 2334, 2300, 2332, 2628, 3225, 3649, + 3156, 2071, 1676, 2141, 2380, 2129, 2035, 2014, + 1542, 1048, 1384, 2197, 2109, 877, 120, 825, + 1656, 1357, 856, 1254, 1923, 2056, 2093, 2657, + 3405, 3542, 2994, 2621, 2942, 3334, 3120, 2552, + 2206, 2220, 2250, 1874, 1385, 1543, 1973, 1423, + 198, 29, 1125, 1695, 806, 0, 263, 1560, + 2130, 2050, 2522, 3231, 2971, 2280, 2656, 3851, + 4095, 3374, 2153, 1810, 2357, 2798, 2562, 2088, + 1879, 1846, 1581, 940, 509, 921, 1484, 1011, + 31, 79, 1132, 1898, 1978, 1988, 2205, 2327, + 2334, 2625, 3035, 2727, 1825, 1636, 2371, 2727, + 2323, 2121, 2341, 2265, 1886, 1866, 2171, 1986, + 1120, 626, 1239, 2015, 1854, 1326, 1485, 2132, + 2467, 2287, 2008, 2142, 2522, 2233, 1167, 733, + 1793, 3076, 2860, 1469, 909, 1947, 2928, 2560 + }, + { + 2048, 2504, 2795, 1937, 1211, 2093, 3713, 4049, + 2790, 1746, 2327, 3617, 3862, 2964, 2133, 1958, + 2048, 1906, 1540, 1495, 1969, 2095, 1253, 469, + 957, 2084, 2288, 1309, 413, 609, 1420, 1878, + 2048, 2416, 2641, 2415, 2445, 3116, 3618, 3425, + 3094, 3057, 2976, 2556, 2157, 2260, 2607, 2510, + 2048, 1846, 1730, 1126, 470, 562, 1118, 1256, + 707, 0, 0, 657, 1800, 2252, 1982, 1778, + 2048, 2337, 2178, 2155, 3149, 4095, 3814, 2019, + 1613, 3417, 4095, 4095, 2914, 2060, 2283, 2403, + 2048, 2008, 2319, 1963, 931, 522, 1245, 2190, + 2418, 1813, 1007, 831, 1340, 1749, 1701, 1701, + 2048, 2283, 2008, 1749, 2382, 3485, 3459, 2102, + 1281, 1916, 2557, 2061, 1334, 1451, 2031, 2222, + 2048, 2033, 2105, 1834, 1584, 1987, 2435, 1916, + 981, 920, 1695, 2348, 2505, 2404, 2271, 2175, + 2048, 1874, 1791, 1820, 1787, 1507, 926, 477, + 918, 2022, 2475, 1928, 1548, 1878, 2145, 2009, + 2048, 2386, 2390, 1952, 2002, 3023, 3848, 3333, + 2518, 3030, 4095, 4095, 2947, 2084, 2100, 2270, + 2048, 1702, 1663, 1726, 1412, 921, 893, 1364, + 1762, 1577, 771, 85, 433, 1479, 2005, 1899, + 2048, 2447, 2401, 2251, 3043, 4095, 4095, 3226, + 1627, 2142, 3851, 4095, 3076, 2212, 2305, 2408, + 2048, 1782, 2003, 2215, 1703, 660, 90, 449, + 1182, 1559, 1324, 832, 814, 1398, 1831, 1842, + 2048, 2517, 2569, 2216, 2218, 2717, 3036, 2810, + 2563, 2830, 3111, 2643, 1890, 1817, 2179, 2205, + 2048, 2021, 1715, 1061, 879, 1567, 2270, 1959, + 932, 554, 1292, 2021, 1905, 1587, 1757, 2076, + 2048, 1774, 1737, 2244, 2760, 2283, 1035, 637, + 1788, 3057, 2821, 1509, 1006, 1957, 2836, 2504 + }, + { + 2048, 2448, 2705, 1949, 1297, 2089, 3594, 3952, + 2776, 1740, 2347, 3840, 4095, 3348, 2198, 1801, + 1994, 2206, 2113, 1926, 2015, 2073, 1535, 882, + 1140, 2082, 2300, 1162, 0, 0, 565, 1339, + 1170, 960, 1385, 1871, 1992, 2142, 2460, 2617, + 2629, 2757, 2854, 2594, 2196, 2427, 3507, 4095, + 3938, 2920, 2662, 3067, 3099, 2608, 2195, 2028, + 1786, 1282, 808, 955, 1777, 2367, 1886, 688, + 1, 586, 1725, 1880, 843, 258, 1065, 2058, + 2132, 2013, 2527, 3003, 2625, 2061, 2503, 3589, + 3621, 2244, 1338, 2198, 3558, 3686, 2746, 1947, + 1842, 2145, 2321, 2155, 1950, 1904, 1660, 1024, + 593, 1060, 2140, 2565, 1577, 323, 565, 1997, + 2685, 2145, 1719, 2040, 2341, 2179, 2045, 2244, + 2355, 2087, 1946, 2350, 2626, 2116, 1633, 2182, + 3093, 3120, 2374, 1774, 1637, 1732, 1850, 1936, + 2048, 2199, 2274, 2250, 2281, 2539, 3089, 3542, + 3156, 2073, 1590, 2184, 2670, 2289, 1876, 2152, + 2553, 2428, 2091, 2069, 2066, 1520, 887, 1098, + 1656, 1132, 0, 0, 782, 1984, 1924, 1117, + 690, 1029, 1618, 1893, 1959, 2147, 2351, 2330, + 2206, 2379, 3157, 4095, 4095, 3062, 2159, 2793, + 3897, 3778, 2732, 2273, 2711, 2971, 2487, 2018, + 2130, 2013, 1044, 328, 923, 1791, 1414, 226, + 0, 708, 1938, 2310, 1670, 958, 958, 1461, + 1879, 2035, 2162, 2506, 2870, 2767, 2466, 2936, + 4064, 4095, 3409, 2348, 2278, 2767, 2907, 2584, + 2334, 2371, 2327, 2100, 2069, 2158, 1901, 1584, + 1772, 1935, 1261, 335, 403, 1472, 2281, 1965, + 1120, 944, 1561, 2033, 1989, 1946, 2085, 2015, + 1628, 1297, 1503, 2326, 2936, 2317, 964, 610, + 1793, 3007, 2766, 1557, 1113, 1967, 2741, 2447 + }, + { + 2048, 2391, 2614, 1962, 1390, 2084, 3441, 3798, + 2733, 1749, 2349, 3933, 4095, 3601, 2245, 1678, + 1949, 2480, 2673, 2383, 2069, 2045, 1963, 1657, + 1630, 2067, 2213, 1389, 126, 0, 478, 1190, + 807, 179, 564, 1450, 1580, 1095, 969, 1325, + 1647, 1798, 1949, 2078, 2078, 2176, 2736, 3459, + 3495, 2877, 2778, 3608, 4095, 3832, 3049, 2830, + 3286, 3873, 3912, 3170, 2242, 1891, 2097, 2250, + 2048, 1830, 1948, 1965, 1182, 208, 570, 2072, + 2449, 693, 0, 0, 845, 2027, 1506, 582, + 844, 1928, 2383, 1996, 1740, 1958, 2133, 2012, + 1906, 2171, 2762, 3132, 2879, 2533, 2914, 3805, + 4095, 3243, 1950, 1562, 2441, 3329, 3017, 2076, + 1754, 2015, 2102, 2047, 2244, 2409, 2068, 1514, + 1479, 1988, 2180, 1686, 1404, 1975, 2465, 1917, + 1062, 1061, 1753, 2291, 2407, 2322, 2217, 2143, + 2048, 1917, 1853, 1872, 1843, 1611, 1109, 674, + 1004, 2023, 2508, 1904, 1355, 1759, 2273, 1890, + 1114, 1014, 1626, 2105, 2060, 1990, 2239, 2366, + 2228, 2562, 3518, 3922, 3105, 2107, 2178, 3174, + 3968, 3797, 3010, 2570, 2795, 3051, 2841, 2406, + 2157, 2164, 2183, 1932, 1602, 1703, 1995, 1593, + 632, 402, 1233, 1703, 667, 0, 0, 882, + 2436, 1965, 539, 279, 1239, 1921, 1852, 1776, + 2048, 2247, 2081, 1919, 2319, 3168, 3686, 3445, + 2847, 2530, 2827, 3508, 3758, 3148, 2545, 2893, + 3591, 3482, 2690, 2150, 2095, 2087, 1943, 1859, + 1850, 1637, 1317, 1517, 2233, 2422, 1719, 1252, + 1659, 1911, 1215, 442, 674, 1620, 2200, 2001, + 1621, 1677, 1967, 2049, 2087, 2327, 2405, 1960, + 1272, 921, 1332, 2380, 3036, 2331, 957, 652, + 1807, 2930, 2695, 1612, 1229, 1978, 2645, 2391 + }, + { + 2048, 2334, 2522, 1976, 1490, 2079, 3258, 3593, + 2665, 1773, 2333, 3889, 4095, 3697, 2269, 1604, + 1919, 2679, 3113, 2768, 2118, 2017, 2415, 2552, + 2260, 2045, 2060, 1896, 1377, 998, 1204, 1514, + 1170, 558, 718, 1443, 1509, 781, 350, 647, + 1021, 1071, 1139, 1531, 1928, 1784, 1177, 880, + 1264, 1772, 1926, 2007, 2266, 2439, 2386, 2410, + 2792, 3438, 3834, 3414, 2357, 1705, 2214, 3417, + 4094, 3520, 2379, 2228, 3421, 4095, 3464, 2029, + 1806, 2675, 3147, 2715, 2168, 2047, 1957, 1561, + 1396, 1948, 2471, 1943, 827, 498, 1262, 2186, + 2411, 1809, 922, 606, 1091, 1557, 1271, 647, + 593, 1304, 2100, 2265, 1910, 1752, 1973, 2052, + 1898, 2005, 2283, 2056, 1407, 1270, 2012, 2828, + 2791, 2119, 1898, 2432, 2701, 2118, 1653, 2168, + 2934, 2918, 2303, 1839, 1742, 1817, 1905, 1968, + 2048, 2156, 2211, 2195, 2221, 2422, 2863, 3260, + 2987, 2070, 1612, 2188, 2750, 2353, 1795, 2236, + 3268, 3558, 2766, 1923, 2007, 2675, 2881, 2459, + 2139, 2121, 1934, 1615, 1678, 2021, 1977, 1347, + 690, 653, 1185, 1519, 1188, 713, 799, 1352, + 1768, 1592, 799, 53, 282, 1342, 1981, 1671, + 1281, 1501, 1912, 2039, 2186, 2693, 3057, 2588, + 1814, 2110, 3494, 4095, 3331, 2323, 2700, 3882, + 4095, 3396, 2161, 1766, 2478, 3411, 3618, 3112, + 2529, 2271, 2311, 2368, 2218, 2019, 1965, 1767, + 1212, 861, 1236, 1839, 1861, 1367, 1080, 1309, + 1542, 1252, 897, 1342, 2261, 2426, 1753, 1413, + 1772, 1963, 1600, 1328, 1568, 1949, 2059, 2054, + 2265, 2525, 2397, 2065, 2176, 2648, 2657, 1920, + 1034, 696, 1245, 2400, 3050, 2324, 1016, 763, + 1831, 2827, 2610, 1674, 1353, 1989, 2548, 2334 + }, + { + 2048, 2277, 2428, 1990, 1595, 2073, 3049, 3342, + 2572, 1810, 2299, 3712, 4095, 3626, 2267, 1589, + 1909, 2769, 3349, 2999, 2150, 1997, 2763, 3291, + 2819, 2024, 1903, 2466, 2932, 2799, 2368, 2132, + 2048, 1862, 1745, 1856, 1832, 1442, 1103, 1156, + 1308, 1252, 1212, 1508, 1905, 1682, 615, 0, + 1, 1020, 1235, 461, 0, 472, 1211, 1424, + 1100, 697, 708, 1259, 1913, 2154, 2014, 1912, + 2048, 2193, 2114, 2104, 2644, 3339, 3110, 2029, + 1740, 3127, 4095, 4095, 3180, 2068, 2650, 3863, + 3750, 2248, 1351, 2193, 3506, 3666, 2770, 1935, + 1786, 2199, 2674, 2737, 2430, 2203, 2224, 2222, + 2048, 1929, 2068, 2203, 1867, 1232, 1199, 2013, + 2590, 2151, 1589, 2033, 2980, 3075, 2091, 1155, + 1243, 1973, 2195, 1680, 1441, 1984, 2396, 1944, + 1293, 1318, 1836, 2218, 2295, 2234, 2162, 2111, + 2048, 1960, 1917, 1928, 1907, 1741, 1373, 1032, + 1249, 2028, 2432, 1921, 1395, 1755, 2298, 1853, + 727, 320, 1170, 2212, 2107, 1013, 427, 1035, + 1715, 1412, 760, 855, 1561, 2029, 2021, 1936, + 2048, 2221, 2244, 2215, 2391, 2686, 2742, 2490, + 2249, 2419, 3196, 4095, 4095, 3026, 2157, 2808, + 4050, 4086, 2953, 2398, 3348, 4095, 4095, 2977, + 1750, 2109, 3132, 3289, 2604, 2133, 2179, 2229, + 2048, 1914, 2025, 2135, 1861, 1261, 870, 1014, + 1435, 1663, 1397, 758, 436, 929, 1494, 1001, + 0, 0, 711, 1758, 1825, 1337, 1158, 1447, + 1683, 1541, 1408, 1710, 2133, 2168, 1981, 1969, + 2048, 2061, 2217, 2563, 2680, 2320, 1914, 2105, + 2836, 3225, 2727, 2076, 2234, 2841, 2792, 1901, + 951, 652, 1252, 2385, 2978, 2298, 1136, 936, + 1864, 2700, 2513, 1742, 1484, 2000, 2449, 2277 + }, + { + 2048, 2220, 2334, 2004, 1704, 2067, 2818, 3053, + 2460, 1858, 2251, 3414, 4031, 3396, 2240, 1636, + 1919, 2736, 3335, 3028, 2158, 1991, 2907, 3645, + 3117, 2011, 1802, 2860, 4086, 4095, 3365, 2704, + 2925, 3282, 2971, 2401, 2313, 2568, 2620, 2422, + 2252, 2173, 2097, 2033, 2032, 1982, 1693, 1304, + 1264, 1583, 1622, 1093, 632, 815, 1302, 1412, + 933, 196, 0, 488, 1712, 2406, 1877, 671, + 1, 568, 1709, 1859, 557, 0, 319, 2073, + 2409, 947, 0, 0, 1270, 2035, 1732, 1227, + 1396, 1984, 2220, 2022, 1893, 2003, 2090, 2030, + 1975, 2111, 2427, 2640, 2519, 2335, 2587, 3208, + 3502, 2962, 1965, 1594, 2464, 3628, 3486, 2101, + 1295, 1914, 2598, 2064, 1043, 989, 2005, 2899, + 2791, 2114, 1918, 2362, 2555, 2100, 1766, 2130, + 2640, 2614, 2210, 1917, 1860, 1907, 1962, 2000, + 2048, 2113, 2146, 2137, 2154, 2281, 2567, 2837, + 2675, 2063, 1737, 2152, 2593, 2298, 1828, 2222, + 3268, 3696, 2916, 1879, 1984, 3221, 3994, 3348, + 2509, 3013, 4095, 4095, 3169, 2103, 2157, 2910, + 3405, 3203, 2647, 2357, 2471, 2597, 2469, 2233, + 2103, 2106, 2115, 1990, 1824, 1873, 2020, 1808, + 1281, 1126, 1573, 1837, 1154, 17, 0, 1100, + 2397, 1964, 283, 0, 655, 1759, 1382, 204, + 0, 692, 1932, 2342, 1581, 491, 132, 630, + 1328, 1655, 1467, 1039, 941, 1374, 1757, 1575, + 1212, 1292, 1716, 1996, 2024, 2028, 2100, 2143, + 2148, 2260, 2435, 2338, 1942, 1826, 2252, 2573, + 2323, 2152, 2746, 3548, 3505, 2575, 1821, 2134, + 3142, 3559, 2864, 2080, 2248, 2864, 2784, 1908, + 1034, 795, 1352, 2336, 2826, 2253, 1312, 1163, + 1903, 2555, 2406, 1814, 1620, 2012, 2350, 2220 + }, + { + 2048, 2162, 2239, 2018, 1817, 2061, 2571, 2735, + 2332, 1916, 2190, 3018, 3473, 3030, 2190, 1738, + 1949, 2585, 3073, 2846, 2140, 1999, 2806, 3502, + 3055, 2012, 1798, 2909, 4095, 4095, 3680, 2913, + 3288, 3935, 3590, 2702, 2599, 3294, 3674, 3370, + 3014, 2978, 2933, 2572, 2176, 2355, 3177, 3803, + 3495, 2741, 2573, 3035, 3287, 2966, 2522, 2392, + 2561, 2764, 2748, 2454, 2116, 1994, 2064, 2115, + 2048, 1975, 2014, 2019, 1744, 1382, 1493, 2057, + 2214, 1451, 509, 482, 1366, 2035, 1658, 822, + 844, 1898, 2597, 1926, 735, 474, 1281, 2179, + 2390, 1822, 969, 628, 1067, 1516, 1146, 273, + 0, 841, 2149, 2578, 1584, 370, 585, 1996, + 2756, 2169, 1562, 2033, 2887, 2910, 2081, 1383, + 1479, 1997, 2143, 1819, 1683, 2010, 2245, 1990, + 1639, 1660, 1937, 2135, 2174, 2142, 2105, 2080, + 2048, 2004, 1982, 1987, 1976, 1890, 1695, 1508, + 1615, 2037, 2265, 1974, 1655, 1865, 2210, 1916, + 1114, 762, 1356, 2185, 2101, 1041, 329, 863, + 1613, 1105, 0, 0, 800, 1983, 1912, 910, + 127, 281, 1047, 1476, 1166, 733, 851, 1391, + 1784, 1613, 829, 23, 149, 1226, 1961, 1482, + 632, 672, 1462, 1829, 1265, 533, 635, 1534, + 2209, 2015, 1481, 1408, 1764, 2004, 1982, 1957, + 2048, 2114, 2059, 2003, 2143, 2453, 2663, 2596, + 2379, 2260, 2417, 2799, 3016, 2744, 2406, 2754, + 3591, 3831, 3101, 2291, 2248, 2738, 2991, 2750, + 2524, 2799, 3150, 2742, 1829, 1638, 2389, 2851, + 2436, 2185, 2913, 3805, 3668, 2608, 1817, 2132, + 3078, 3425, 2768, 2075, 2215, 2713, 2634, 1939, + 1272, 1106, 1533, 2258, 2607, 2193, 1531, 1433, + 1948, 2394, 2291, 1890, 1760, 2024, 2249, 2162 + }, + { + 2048, 2105, 2143, 2033, 1932, 2054, 2312, 2396, + 2192, 1980, 2121, 2551, 2793, 2565, 2123, 1882, + 1994, 2341, 2615, 2495, 2100, 2020, 2490, 2908, + 2654, 2026, 1892, 2594, 3514, 3739, 3149, 2645, + 2925, 3416, 3196, 2548, 2482, 3061, 3413, 3196, + 2917, 2917, 2909, 2579, 2184, 2389, 3368, 4095, + 3938, 3011, 2828, 3622, 4095, 3770, 3023, 2835, + 3362, 4095, 4095, 3707, 2396, 1681, 2219, 3427, + 4094, 3530, 2389, 2240, 3598, 4095, 3939, 2019, + 1621, 3410, 4095, 4095, 3221, 2068, 2626, 3750, + 3621, 2232, 1405, 2183, 3439, 3644, 2793, 1924, + 1740, 2243, 2953, 3201, 2820, 2454, 2719, 3335, + 3502, 2881, 1979, 1697, 2347, 3111, 2958, 2079, + 1621, 1976, 2331, 2056, 1572, 1565, 2029, 2411, + 2355, 2074, 1997, 2168, 2238, 2067, 1946, 2077, + 2256, 2244, 2103, 2003, 1984, 2000, 2019, 2032, + 2048, 2069, 2080, 2078, 2084, 2127, 2226, 2321, + 2268, 2053, 1935, 2086, 2252, 2144, 1961, 2118, + 2553, 2751, 2430, 1970, 2017, 2626, 3049, 2749, + 2309, 2624, 3428, 3604, 2854, 2090, 2139, 2833, + 3405, 3329, 2793, 2485, 2742, 3116, 3052, 2617, + 2285, 2453, 3232, 4095, 4062, 2961, 2148, 2746, + 3897, 3959, 2917, 2395, 3395, 4095, 4095, 3220, + 1635, 2142, 3978, 4095, 3496, 2342, 2719, 3896, + 4095, 3406, 2164, 1747, 2533, 3703, 4095, 3653, + 2897, 2533, 2807, 3457, 3716, 3158, 2579, 3029, + 4064, 4095, 3279, 2318, 2260, 2748, 2965, 2704, + 2476, 2700, 2973, 2612, 1875, 1734, 2302, 2630, + 2323, 2143, 2632, 3208, 3096, 2403, 1904, 2099, + 2667, 2862, 2468, 2063, 2143, 2420, 2372, 1988, + 1628, 1543, 1774, 2158, 2340, 2123, 1781, 1732, + 1997, 2223, 2170, 1968, 1903, 2036, 2149, 2105 + }, + { + 2048, 2081, 2108, 2062, 2033, 2108, 2213, 2231, + 2171, 2169, 2313, 2495, 2523, 2399, 2282, 2198, + 2086, 2082, 2304, 2509, 2430, 2273, 2364, 2557, + 2495, 2238, 2211, 2647, 3262, 3494, 3182, 2884, + 3081, 3340, 3015, 2465, 2546, 3166, 3465, 3191, + 2875, 2836, 2831, 2605, 2347, 2539, 3295, 3937, + 3765, 3197, 3214, 3747, 3836, 3319, 3028, 3351, + 3799, 3942, 3782, 3381, 2828, 2390, 2345, 2780, + 3431, 3666, 3188, 2747, 3186, 3917, 3676, 2669, + 2404, 3379, 4095, 4095, 3542, 2912, 2971, 3195, + 2856, 2177, 2097, 2766, 3226, 2929, 2452, 2338, + 2369, 2329, 2435, 2739, 2953, 2972, 2976, 3055, + 3070, 2820, 2318, 1989, 2255, 2794, 2819, 2258, + 1859, 1983, 2135, 1924, 1650, 1723, 2062, 2302, + 2263, 2109, 2092, 2194, 2176, 2011, 1965, 2133, + 2271, 2208, 2073, 2013, 2010, 2007, 2008, 2025, + 2048, 2062, 2073, 2093, 2113, 2126, 2178, 2283, + 2302, 2132, 1953, 2000, 2163, 2178, 2096, 2181, + 2443, 2593, 2437, 2158, 2152, 2515, 2813, 2693, + 2533, 2857, 3355, 3288, 2694, 2318, 2490, 2851, + 3034, 3022, 2962, 2951, 2919, 2748, 2575, 2643, + 2816, 2840, 2969, 3484, 3859, 3453, 2747, 2699, + 3236, 3489, 3234, 3128, 3642, 4095, 4095, 3247, + 2351, 2675, 3676, 3893, 3199, 2870, 3422, 3924, + 3615, 2867, 2387, 2435, 2850, 3295, 3533, 3569, + 3399, 2991, 2695, 2959, 3443, 3394, 2993, 3131, + 3787, 3963, 3300, 2558, 2412, 2676, 2811, 2651, + 2532, 2756, 2984, 2622, 1895, 1703, 2209, 2582, + 2419, 2303, 2653, 3027, 2911, 2454, 2158, 2257, + 2522, 2573, 2384, 2295, 2416, 2406, 2088, 1777, + 1737, 1830, 1894, 1984, 2097, 2096, 1974, 1898, + 1956, 2060, 2088, 2032, 2001, 2056, 2110, 2082 + }, + { + 2048, 1781, 1533, 1328, 1188, 1124, 1143, 1240, + 1403, 1614, 1851, 2091, 2309, 2484, 2597, 2633, + 2583, 2447, 2234, 1964, 1663, 1365, 1105, 912, + 811, 812, 918, 1116, 1384, 1696, 2022, 2334, + 2610, 2832, 2990, 3078, 3096, 3046, 2937, 2779, + 2588, 2381, 2175, 1988, 1831, 1709, 1621, 1557, + 1503, 1443, 1361, 1248, 1094, 899, 665, 395, + 95, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 166, 384, 583, 766, + 938, 1107, 1283, 1476, 1697, 1953, 2250, 2587, + 2956, 3344, 3735, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 3719, 3312, 2947, 2640, 2399, 2226, 2113, + 2048, 2012, 1986, 1950, 1884, 1773, 1608, 1389, + 1126, 836, 546, 284, 83, 0, 0, 59, + 274, 587, 976, 1413, 1868, 2312, 2719, 3070, + 3346, 3538, 3638, 3645, 3564, 3409, 3198, 2956, + 2709, 2483, 2299, 2168, 2094, 2069, 2080, 2107, + 2131, 2132, 2096, 2015, 1884, 1704, 1477, 1212, + 917, 605, 291, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 195, 562, 935, 1298, 1639, 1951, 2228, 2469, + 2677, 2855, 3015, 3168, 3329, 3511, 3729, 3991, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 3769, 3464, 3233, 3077, 2987, 2951, + 2950, 2961, 2963, 2934, 2858, 2727, 2540, 2308 + }, + { + 2048, 1952, 1949, 1768, 1386, 1123, 1378, 2211, + 3175, 3594, 3098, 1985, 1073, 1108, 2177, 3602, + 4095, 4052, 2791, 1493, 964, 1374, 2192, 2654, + 2372, 1590, 934, 876, 1388, 2030, 2357, 2278, + 2048, 1963, 2047, 2045, 1726, 1193, 892, 1244, + 2221, 3244, 3550, 2777, 1292, 0, 0, 118, + 983, 1287, 636, 0, 0, 0, 0, 779, + 1546, 1488, 916, 452, 518, 1050, 1650, 1981, + 2048, 2115, 2382, 2741, 2875, 2608, 2181, 2155, + 2966, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 3621, 2562, 2500, 3327, + 4095, 4095, 4095, 3627, 2872, 2516, 2453, 2357, + 2048, 1668, 1511, 1672, 1890, 1743, 1060, 167, + 0, 121, 1263, 2408, 2778, 2135, 981, 181, + 286, 1100, 1823, 1683, 543, 0, 0, 0, + 0, 565, 1406, 1588, 1422, 1356, 1574, 1898, + 2048, 1971, 1925, 2214, 2846, 3444, 3531, 2971, + 2159, 1763, 2181, 3173, 3984, 3916, 2897, 1582, + 883, 1282, 2447, 3481, 3584, 2644, 1282, 365, + 373, 1108, 1940, 2337, 2229, 1947, 1840, 1956, + 2048, 1886, 1553, 1420, 1810, 2663, 3513, 3854, + 3587, 3151, 3191, 3999, 4095, 4095, 4095, 4095, + 3032, 2330, 2796, 4021, 4095, 4095, 4095, 3178, + 2396, 2381, 2873, 3295, 3253, 2807, 2325, 2091, + 2048, 1899, 1453, 865, 538, 744, 1328, 1772, + 1624, 918, 212, 166, 965, 2085, 2614, 1931, + 204, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 808, 1588, 1863, 1805, 1795, + 2048, 2419, 2597, 2452, 2221, 2322, 2954, 3842, + 4095, 4095, 3540, 2958, 3201, 4095, 4095, 4095, + 4095, 4095, 3278, 2418, 2608, 3384, 3934, 3743, + 2950, 2165, 1934, 2315, 2887, 3143, 2906, 2416 + }, + { + 2048, 2249, 2630, 3002, 3260, 3501, 3941, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4049, 4012, 4008, 3770, 3277, 2720, 2299, + 2048, 1828, 1484, 998, 506, 139, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 970, 2325, 2665, 2012, 1093, + 817, 1633, 3210, 4095, 4095, 4095, 3150, 1878, + 1285, 1384, 1706, 1717, 1236, 549, 159, 400, + 1194, 2129, 2764, 2912, 2708, 2426, 2253, 2169, + 2048, 1826, 1593, 1502, 1589, 1683, 1506, 908, + 47, 0, 0, 0, 0, 102, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 276, 753, 1285, 1720, + 2048, 2395, 2870, 3414, 3810, 3864, 3601, 3308, + 3340, 3843, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 3704, 3989, 4095, + 4095, 4095, 4095, 4051, 2637, 2334, 3235, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 3282, 2286, 2136, 2589, 3105, 3255, + 2981, 2548, 2276, 2280, 2418, 2463, 2320, 2109 + }, + { + 2048, 1981, 2022, 2010, 1837, 1586, 1497, 1768, + 2349, 2925, 3133, 2858, 2376, 2189, 2660, 3701, + 4095, 4095, 4095, 3995, 3304, 3429, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 3832, 3750, 3782, 3652, 3274, 2774, 2342, + 2048, 1790, 1424, 922, 427, 127, 60, 23, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 24, 0, 0, 0, + 0, 0, 22, 745, 854, 467, 36, 0, + 431, 1118, 1677, 1894, 1833, 1725, 1753, 1908, + 2048, 2060, 1990, 1997, 2183, 2459, 2576, 2336, + 1788, 1254, 1108, 1472, 2077, 2413, 2102, 1214, + 260, 0, 244, 1107, 1727, 1510, 430, 0, + 0, 0, 0, 788, 1040, 227, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 40, 66, 241, 660, 1203, 1688, + 2048, 2376, 2811, 3365, 3880, 4095, 4095, 4066, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 3805, 3597, 3930, 4095, 4095, + 4026, 3378, 2835, 2600, 2608, 2634, 2512, 2264 + }, + { + 2048, 1979, 2009, 1964, 1767, 1541, 1505, 1758, + 2132, 2275, 1927, 1182, 498, 415, 1153, 2399, + 3472, 3777, 3230, 2333, 1819, 2110, 2990, 3747, + 3706, 2764, 1532, 945, 1611, 3353, 4095, 4095, + 4095, 4095, 3789, 3389, 3945, 4095, 4095, 4095, + 3758, 2753, 2668, 3694, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4055, 3294, + 2817, 2815, 3125, 3395, 3363, 3026, 2587, 2249, + 2048, 1864, 1579, 1221, 950, 892, 965, 883, + 359, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 25, 0, 0, 0, + 0, 0, 272, 531, 159, 0, 0, 0, + 112, 1003, 1620, 1819, 1749, 1675, 1747, 1917, + 2048, 2087, 2137, 2350, 2744, 3124, 3204, 2846, + 2219, 1720, 1692, 2143, 2708, 2905, 2525, 1832, + 1408, 1721, 2721, 3800, 4095, 3433, 1879, 361, + 0, 227, 1372, 2263, 2247, 1378, 370, 51, + 733, 1941, 2725, 2320, 702, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 265, 688, 265, 0, 0, 0, 0, 0, + 349, 696, 720, 703, 872, 1233, 1620, 1885, + 2048, 2262, 2651, 3160, 3571, 3694, 3553, 3408, + 3559, 4089, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 3630, 3510, 3867, 4095, 4095, + 3651, 3107, 2795, 2789, 2907, 2897, 2658, 2307 + }, + { + 2048, 1872, 1766, 1689, 1616, 1562, 1560, 1621, + 1701, 1715, 1605, 1390, 1179, 1103, 1224, 1486, + 1746, 1869, 1832, 1740, 1752, 1968, 2344, 2724, + 2953, 2991, 2957, 3045, 3380, 3923, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4063, + 3723, 3511, 3391, 3280, 3110, 2869, 2590, 2314, + 2048, 1762, 1431, 1059, 683, 332, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 50, 538, 940, 1218, 1401, 1552, 1714, 1886, + 2048, 2191, 2340, 2527, 2752, 2966, 3097, 3104, + 3013, 2909, 2869, 2903, 2942, 2891, 2712, 2471, + 2305, 2325, 2529, 2785, 2913, 2805, 2509, 2198, + 2051, 2125, 2315, 2419, 2288, 1922, 1470, 1113, + 925, 814, 584, 80, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 138, 382, 682, 1035, 1400, 1738, + 2048, 2359, 2699, 3058, 3393, 3664, 3881, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4019, 3703, 3441, 3199, 2929, 2620, 2307 + }, + { + 2048, 2324, 2624, 2954, 3284, 3568, 3796, 4005, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 3881, 3732, + 3693, 3578, 3283, 2863, 2500, 2370, 2510, 2788, + 2985, 2945, 2673, 2325, 2089, 2063, 2189, 2312, + 2292, 2097, 1816, 1580, 1463, 1441, 1421, 1321, + 1138, 950, 855, 909, 1092, 1337, 1585, 1816, + 2048, 2293, 2541, 2762, 2946, 3128, 3378, 3746, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4031, 3757, 3452, 3099, 2725, 2371, + 2048, 1733, 1398, 1043, 710, 449, 268, 119, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 62, 277, 623, 1009, 1254, 1223, 941, + 599, 434, 584, 993, 1456, 1759, 1818, 1730, + 1683, 1824, 2153, 2532, 2794, 2860, 2799, 2761, + 2873, 3137, 3439, 3623, 3604, 3411, 3161, 2970, + 2880, 2853, 2815, 2720, 2581, 2438, 2318, 2203, + 2048, 1821, 1537, 1244, 981, 748, 506, 225, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 108, 359, 569, 812, 1113, 1444, 1762 + }, + { + 2048, 2136, 2184, 2258, 2362, 2450, 2495, 2543, + 2698, 3031, 3494, 3907, 4050, 3808, 3252, 2597, + 2059, 1711, 1452, 1102, 565, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 427, + 900, 1324, 1741, 2214, 2763, 3334, 3848, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 3382, 2375, 1392, 392, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 195, 503, 850, 1247, 1656, + 2048, 2448, 2907, 3435, 3967, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 3718, 2480, 1360, + 481, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 1, 806, 1558, 2292, 3019, 3707, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4046, 3131, 2308, 1533, 749, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 74, 551, 1028, 1482, 1838 + }, + { + 2048, 1652, 1202, 705, 224, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 1214, 2449, 3595, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 3911, 3359, 2788, 2223, 1730, 1342, + 1019, 683, 285, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 236, 1269, 2189, 2856, 3287, + 3595, 3868, 4095, 4095, 4063, 3715, 3216, 2650, + 2048, 1375, 591, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 386, 1403, 2358, 3256, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 3807, 3002, 2267, 1658, 1199, + 849, 542, 257, 54, 38, 267, 673, 1087, + 1334, 1350, 1222, 1104, 1090, 1126, 1049, 726, + 188, 0, 0, 0, 282, 1093, 1794, 2245, + 2504, 2743, 3095, 3544, 3939, 4095, 4046, 3813, + 3592, 3498, 3518, 3536, 3436, 3179, 2817, 2428 + }, + { + 2048, 824, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 661, 1505, 2315, 3100, 3819, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 3826, 3648, + 3469, 3194, 2815, 2426, 2146, 2043, 2107, 2294, + 2591, 3033, 3661, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 3630, 2887, + 2048, 1109, 133, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 354, 1368, 2393, 3450, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 3514, + 3057, 2966, 3065, 3137, 3087, 2988, 3006, 3240, + 3624, 3948, 4002, 3708, 3173, 2605, 2182, 1954, + 1859, 1803, 1751, 1735, 1808, 1977, 2194, 2399, + 2590, 2832, 3206, 3724, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 3196 + }, + { + 2048, 1477, 923, 367, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 223, 940, 1648, 2184, 2491, 2611, + 2612, 2516, 2290, 1898, 1357, 736, 105, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 774, 1727, 2702, 3715, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4050, 2990, + 2048, 1224, 481, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 174, 807, + 1142, 1166, 1034, 944, 978, 1044, 964, 629, + 117, 0, 0, 0, 571, 1314, 1898, 2238, + 2420, 2586, 2817, 3071, 3233, 3221, 3048, 2808, + 2590, 2413, 2220, 1944, 1572, 1160, 775, 428, + 63, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 442, 1643, 2875, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 4095, 4095, + 4095, 4095, 4095, 4095, 4095, 4095, 3458, 2696 + }, + { + 1987, 2084, 2164, 2206, 2261, 2413, 2694, 3034, + 3296, 3367, 3248, 3051, 2909, 2853, 2781, 2527, + 2008, 1320, 710, 426, 552, 949, 1342, 1506, + 1401, 1175, 1033, 1084, 1263, 1404, 1385, 1232, + 1112, 1214, 1614, 2226, 2867, 3375, 3694, 3867, + 3964, 4006, 3959, 3788, 3507, 3183, 2884, 2610, + 2289, 1846, 1285, 729, 350, 262, 431, 704, + 918, 1027, 1128, 1368, 1808, 2329, 2693, 2698, + 2326, 1780, 1359, 1274, 1522, 1915, 2227, 2346, + 2336, 2355, 2510, 2771, 2994, 3032, 2852, 2551, + 2286, 2163, 2180, 2259, 2327, 2370, 2421, 2501, + 2577, 2576, 2454, 2250, 2071, 2006, 2043, 2054, + 1878, 1451, 867, 332, 27, 0, 107, 208, + 231, 284, 575, 1246, 2243, 3308, 4095, 4095, + 4095, 4095, 4032, 3954, 3931, 3821, 3535, 3119, + 2706, 2412, 2246, 2115, 1902, 1565, 1157, 778, + 494, 300, 155, 42, 6, 113, 382, 742, + 1067, 1277, 1411, 1619, 2051, 2729, 3500, 4095, + 4095, 4095, 4046, 3783, 3614, 3452, 3122, 2520, + 1730, 1003, 607, 659, 1051, 1532, 1869, 1985, + 1967, 1963, 2057, 2209, 2308, 2272, 2117, 1938, + 1825, 1796, 1793, 1750, 1652, 1552, 1515, 1550, + 1597, 1579, 1488, 1407, 1460, 1699, 2044, 2314, + 2354, 2157, 1892, 1802, 2033, 2537, 3104, 3508, + 3666, 3670, 3698, 3846, 4036, 4048, 3685, 2913, + 1911, 960, 286, 0, 0, 0, 0, 0, + 0, 147, 539, 957, 1333, 1674, 2033, 2442, + 2863, 3202, 3389, 3436, 3433, 3474, 3572, 3638, + 3555, 3291, 2949, 2712, 2705, 2888, 3052, 2955, + 2488, 1760, 1030, 544, 377, 414, 461, 408, + 315, 362, 697, 1307, 2009, 2557, 2796, 2743, + 2546, 2367, 2278, 2242, 2188, 2087, 1981, 1939 + }, + { + 1039, 1027, 1033, 1037, 1091, 1279, 1630, 2072, + 2464, 2687, 2739, 2725, 2771, 2905, 3017, 2936, + 2574, 2024, 1528, 1331, 1517, 1944, 2340, 2478, + 2320, 2016, 1776, 1709, 1757, 1756, 1587, 1283, + 1014, 971, 1234, 1723, 2254, 2669, 2915, 3034, + 3099, 3131, 3097, 2959, 2732, 2482, 2273, 2105, + 1904, 1591, 1168, 753, 518, 570, 873, 1271, + 1597, 1802, 1979, 2275, 2746, 3274, 3619, 3578, + 3135, 2494, 1955, 1731, 1825, 2052, 2188, 2131, + 1946, 1798, 1799, 1925, 2035, 1988, 1752, 1429, + 1176, 1099, 1197, 1389, 1600, 1810, 2049, 2332, + 2619, 2831, 2916, 2907, 2904, 2991, 3150, 3247, + 3121, 2703, 2088, 1482, 1069, 890, 832, 736, + 544, 371, 432, 878, 1662, 2532, 3179, 3416, + 3281, 2985, 2759, 2699, 2735, 2721, 2567, 2313, + 2086, 1997, 2048, 2137, 2143, 2013, 1796, 1585, + 1442, 1357, 1286, 1211, 1176, 1247, 1446, 1704, + 1900, 1956, 1920, 1945, 2188, 2677, 3264, 3709, + 3827, 3613, 3229, 2878, 2649, 2456, 2125, 1549, + 811, 162, 0, 34, 558, 1180, 1666, 1933, + 2065, 2206, 2436, 2712, 2921, 2977, 2896, 2770, + 2689, 2670, 2656, 2579, 2427, 2254, 2126, 2054, + 1981, 1834, 1605, 1382, 1292, 1391, 1602, 1747, + 1675, 1382, 1041, 895, 1094, 1592, 2178, 2628, + 2857, 2957, 3102, 3389, 3733, 3912, 3723, 3129, + 2301, 1517, 997, 790, 788, 838, 859, 880, + 983, 1211, 1522, 1827, 2061, 2234, 2405, 2611, + 2821, 2948, 2928, 2779, 2599, 2489, 2466, 2445, + 2313, 2039, 1728, 1562, 1664, 1990, 2326, 2427, + 2176, 1673, 1173, 911, 958, 1189, 1406, 1491, + 1501, 1612, 1969, 2562, 3205, 3657, 3764, 3549, + 3166, 2782, 2476, 2220, 1948, 1639, 1342, 1132 + }, + { + 1698, 1773, 1820, 1816, 1815, 1903, 2116, 2392, + 2597, 2628, 2490, 2304, 2205, 2228, 2272, 2169, + 1833, 1355, 971, 922, 1281, 1894, 2479, 2798, + 2801, 2627, 2480, 2462, 2511, 2466, 2208, 1776, + 1348, 1125, 1199, 1500, 1857, 2122, 2250, 2295, + 2330, 2380, 2410, 2380, 2296, 2217, 2198, 2224, + 2211, 2068, 1786, 1475, 1299, 1363, 1630, 1944, + 2144, 2189, 2181, 2278, 2549, 2887, 3065, 2889, + 2353, 1666, 1131, 962, 1157, 1527, 1841, 1982, + 2007, 2066, 2260, 2552, 2792, 2830, 2629, 2287, + 1964, 1769, 1707, 1708, 1706, 1696, 1719, 1805, + 1925, 2010, 2017, 1983, 2010, 2181, 2472, 2743, + 2823, 2630, 2245, 1862, 1651, 1641, 1709, 1686, + 1512, 1300, 1266, 1568, 2165, 2818, 3229, 3226, + 2861, 2359, 1962, 1777, 1742, 1715, 1608, 1457, + 1384, 1491, 1769, 2102, 2355, 2461, 2455, 2417, + 2397, 2382, 2320, 2194, 2048, 1959, 1955, 1980, + 1926, 1730, 1454, 1267, 1336, 1700, 2220, 2658, + 2831, 2730, 2511, 2367, 2375, 2435, 2358, 2023, + 1500, 1023, 850, 1085, 1613, 2178, 2549, 2649, + 2573, 2476, 2453, 2475, 2444, 2289, 2036, 1789, + 1645, 1623, 1668, 1707, 1722, 1757, 1865, 2044, + 2221, 2309, 2288, 2232, 2258, 2417, 2627, 2712, + 2523, 2064, 1519, 1141, 1095, 1348, 1705, 1955, + 2024, 2014, 2106, 2397, 2804, 3100, 3075, 2682, + 2080, 1535, 1250, 1262, 1450, 1650, 1772, 1839, + 1932, 2093, 2286, 2428, 2466, 2419, 2361, 2343, + 2345, 2295, 2138, 1899, 1684, 1592, 1641, 1740, + 1769, 1688, 1589, 1642, 1956, 2475, 2974, 3197, + 3021, 2542, 2014, 1673, 1595, 1665, 1693, 1573, + 1374, 1286, 1466, 1913, 2451, 2843, 2941, 2767, + 2472, 2218, 2076, 2006, 1933, 1822, 1711, 1662 + }, + { + 951, 1041, 1085, 1054, 1021, 1103, 1347, 1669, + 1899, 1910, 1721, 1488, 1376, 1423, 1500, 1419, + 1094, 642, 321, 349, 753, 1341, 1831, 2037, + 1960, 1750, 1562, 1452, 1366, 1237, 1069, 945, + 951, 1087, 1258, 1350, 1327, 1264, 1269, 1380, + 1513, 1528, 1361, 1099, 939, 1036, 1369, 1732, + 1872, 1675, 1249, 858, 734, 921, 1266, 1546, + 1625, 1531, 1394, 1318, 1305, 1277, 1174, 1031, + 951, 1020, 1222, 1444, 1575, 1591, 1567, 1596, + 1677, 1700, 1527, 1134, 670, 385, 457, 862, + 1374, 1722, 1768, 1592, 1406, 1385, 1534, 1707, + 1733, 1556, 1274, 1043, 960, 994, 1037, 1015, + 951, 937, 1038, 1229, 1416, 1527, 1581, 1669, + 1851, 2065, 2134, 1893, 1335, 659, 170, 85, + 396, 890, 1303, 1500, 1536, 1575, 1725, 1943, + 2073, 1978, 1660, 1262, 960, 843, 868, 927, + 951, 961, 1025, 1167, 1326, 1408, 1377, 1312, + 1354, 1580, 1907, 2126, 2039, 1619, 1047, 603, + 477, 654, 940, 1131, 1161, 1133, 1213, 1471, + 1812, 2042, 2014, 1735, 1354, 1049, 908, 902, + 951, 1013, 1113, 1284, 1493, 1630, 1585, 1354, + 1076, 946, 1074, 1384, 1664, 1714, 1501, 1184, + 992, 1051, 1290, 1503, 1517, 1324, 1085, 997, + 1139, 1416, 1637, 1659, 1485, 1235, 1041, 957, + 951, 979, 1052, 1225, 1522, 1860, 2071, 2010, + 1671, 1215, 870, 775, 884, 1023, 1040, 933, + 855, 983, 1356, 1820, 2126, 2104, 1784, 1371, + 1096, 1056, 1176, 1291, 1286, 1169, 1031, 957, + 951, 965, 974, 1026, 1205, 1538, 1928, 2188, + 2167, 1868, 1455, 1139, 1023, 1036, 1006, 822, + 548, 389, 540, 1025, 1653, 2139, 2287, 2105, + 1769, 1482, 1334, 1279, 1213, 1092, 962, 905 + }, + { + 1705, 1810, 1851, 1793, 1729, 1803, 2071, 2426, + 2667, 2650, 2412, 2142, 2026, 2092, 2194, 2142, + 1878, 1538, 1355, 1478, 1855, 2278, 2533, 2547, + 2396, 2204, 2035, 1868, 1680, 1526, 1535, 1796, + 2245, 2669, 2834, 2657, 2271, 1930, 1811, 1898, + 2008, 1966, 1754, 1523, 1462, 1641, 1955, 2217, + 2316, 2290, 2266, 2334, 2459, 2523, 2444, 2257, + 2078, 1988, 1947, 1828, 1555, 1212, 1025, 1198, + 1745, 2444, 2971, 3109, 2878, 2489, 2168, 2005, + 1934, 1849, 1722, 1631, 1671, 1844, 2041, 2131, + 2083, 1993, 1996, 2131, 2293, 2317, 2134, 1851, + 1684, 1783, 2103, 2422, 2511, 2311, 1976, 1746, + 1770, 1998, 2247, 2350, 2274, 2104, 1943, 1812, + 1670, 1504, 1397, 1492, 1864, 2416, 2903, 3085, + 2900, 2499, 2127, 1942, 1906, 1857, 1671, 1393, + 1204, 1277, 1622, 2075, 2421, 2546, 2502, 2421, + 2390, 2384, 2319, 2163, 1991, 1920, 1988, 2095, + 2069, 1827, 1472, 1246, 1355, 1799, 2359, 2743, + 2786, 2547, 2232, 2025, 1959, 1943, 1880, 1778, + 1740, 1857, 2100, 2330, 2406, 2306, 2136, 2031, + 2025, 2022, 1899, 1644, 1407, 1399, 1716, 2238, + 2693, 2843, 2653, 2299, 2026, 1965, 2060, 2150, + 2116, 1973, 1823, 1744, 1719, 1672, 1577, 1518, + 1634, 1988, 2472, 2859, 2956, 2749, 2409, 2151, + 2067, 2064, 1966, 1691, 1341, 1139, 1254, 1663, + 2166, 2528, 2639, 2553, 2401, 2267, 2141, 1983, + 1813, 1736, 1849, 2129, 2405, 2467, 2232, 1832, + 1528, 1525, 1816, 2191, 2399, 2335, 2094, 1881, + 1829, 1916, 2015, 2029, 1982, 1987, 2122, 2343, + 2512, 2511, 2349, 2146, 2017, 1964, 1877, 1655, + 1335, 1111, 1198, 1657, 2314, 2862, 3060, 2889, + 2534, 2226, 2079, 2041, 1987, 1858, 1710, 1647 + }, + { + 1144, 1198, 1236, 1220, 1256, 1498, 1990, 2580, + 3014, 3122, 2948, 2697, 2556, 2538, 2499, 2288, + 1909, 1529, 1341, 1403, 1593, 1730, 1729, 1658, + 1647, 1748, 1886, 1951, 1934, 1974, 2238, 2746, + 3301, 3592, 3419, 2835, 2106, 1518, 1195, 1071, + 1019, 992, 1053, 1274, 1625, 1966, 2173, 2255, + 2364, 2643, 3076, 3449, 3501, 3131, 2477, 1826, + 1399, 1224, 1171, 1115, 1063, 1132, 1407, 1829, + 2218, 2417, 2426, 2383, 2429, 2573, 2682, 2623, + 2404, 2187, 2145, 2298, 2464, 2405, 2021, 1449, + 964, 779, 913, 1222, 1552, 1858, 2191, 2580, + 2940, 3119, 3034, 2771, 2536, 2481, 2566, 2577, + 2302, 1726, 1061, 603, 523, 776, 1178, 1581, + 1963, 2380, 2832, 3200, 3316, 3115, 2717, 2344, + 2153, 2114, 2064, 1872, 1576, 1354, 1362, 1583, + 1829, 1895, 1741, 1524, 1469, 1683, 2078, 2463, + 2706, 2818, 2888, 2952, 2932, 2709, 2273, 1779, + 1455, 1419, 1570, 1669, 1535, 1206, 921, 932, + 1318, 1939, 2561, 3025, 3314, 3477, 3507, 3315, + 2831, 2128, 1439, 1019, 968, 1161, 1361, 1415, + 1373, 1414, 1672, 2096, 2486, 2665, 2620, 2502, + 2475, 2571, 2672, 2636, 2436, 2180, 2004, 1932, + 1854, 1648, 1325, 1058, 1048, 1351, 1804, 2147, + 2226, 2111, 2030, 2171, 2533, 2940, 3191, 3203, + 3032, 2762, 2401, 1897, 1248, 607, 235, 329, + 867, 1593, 2194, 2507, 2599, 2661, 2815, 3011, + 3087, 2937, 2613, 2279, 2058, 1930, 1775, 1516, + 1222, 1063, 1161, 1467, 1789, 1956, 1962, 1964, + 2128, 2464, 2797, 2915, 2746, 2427, 2187, 2161, + 2286, 2380, 2302, 2060, 1775, 1545, 1360, 1148, + 909, 781, 967, 1553, 2391, 3157, 3555, 3510, + 3184, 2829, 2581, 2401, 2164, 1816, 1448, 1202 + }, + { + 1925, 1987, 2037, 2030, 2087, 2379, 2938, 3577, + 4008, 4060, 3804, 3468, 3236, 3108, 2955, 2685, + 2367, 2173, 2208, 2399, 2553, 2539, 2413, 2363, + 2529, 2862, 3172, 3307, 3296, 3312, 3486, 3756, + 3894, 3697, 3168, 2517, 1999, 1727, 1646, 1657, + 1757, 2044, 2579, 3251, 3804, 4014, 3875, 3595, + 3425, 3440, 3489, 3352, 2942, 2387, 1919, 1686, + 1669, 1770, 1951, 2282, 2827, 3495, 4031, 4095, + 3856, 3301, 2843, 2698, 2822, 2999, 3038, 2922, + 2758, 2633, 2515, 2313, 2030, 1824, 1908, 2356, + 3005, 3555, 3790, 3733, 3585, 3526, 3555, 3514, + 3265, 2837, 2405, 2130, 2020, 1959, 1854, 1773, + 1899, 2352, 3045, 3709, 4087, 4095, 3946, 3756, + 3596, 3363, 2942, 2375, 1873, 1658, 1780, 2087, + 2371, 2544, 2685, 2914, 3234, 3491, 3522, 3319, + 3071, 3005, 3182, 3441, 3524, 3300, 2864, 2435, + 2170, 2058, 1994, 1936, 1977, 2245, 2744, 3288, + 3627, 3647, 3473, 3352, 3437, 3649, 3745, 3534, + 3032, 2435, 1947, 1640, 1475, 1427, 1580, 2054, + 2846, 3729, 4095, 4095, 4095, 3589, 3154, 2933, + 2832, 2696, 2486, 2300, 2249, 2320, 2381, 2328, + 2214, 2227, 2517, 3033, 3531, 3760, 3659, 3396, + 3207, 3191, 3247, 3196, 2970, 2671, 2458, 2387, + 2361, 2244, 2030, 1884, 2007, 2447, 3035, 3516, + 3751, 3802, 3831, 3907, 3919, 3679, 3119, 2392, + 1780, 1490, 1521, 1726, 1974, 2266, 2682, 3223, + 3730, 3979, 3863, 3510, 3189, 3093, 3188, 3257, + 3105, 2732, 2320, 2068, 2025, 2094, 2168, 2258, + 2472, 2868, 3331, 3627, 3592, 3289, 2979, 2914, + 3137, 3451, 3591, 3433, 3059, 2642, 2283, 1965, + 1659, 1444, 1506, 1980, 2784, 3620, 4095, 4095, + 4031, 3737, 3527, 3366, 3117, 2724, 2293, 2000 + }, + { + 1117, 1190, 1253, 1255, 1331, 1665, 2274, 2933, + 3330, 3305, 2964, 2552, 2241, 2014, 1766, 1479, + 1282, 1326, 1599, 1899, 1996, 1843, 1635, 1631, + 1925, 2370, 2721, 2850, 2827, 2790, 2766, 2626, + 2237, 1641, 1080, 811, 903, 1198, 1477, 1667, + 1883, 2264, 2785, 3234, 3381, 3179, 2793, 2430, + 2150, 1848, 1419, 930, 618, 693, 1149, 1751, + 2236, 2511, 2678, 2865, 3054, 3086, 2829, 2351, + 1891, 1661, 1666, 1723, 1652, 1461, 1331, 1421, + 1704, 1986, 2103, 2083, 2115, 2351, 2733, 3031, + 3045, 2777, 2407, 2101, 1865, 1577, 1177, 795, + 677, 970, 1568, 2188, 2594, 2767, 2863, 3009, + 3154, 3114, 2775, 2226, 1695, 1355, 1187, 1058, + 907, 856, 1104, 1712, 2486, 3090, 3293, 3127, + 2813, 2546, 2345, 2112, 1804, 1533, 1464, 1633, + 1869, 1930, 1727, 1422, 1300, 1520, 1986, 2451, + 2733, 2842, 2898, 2949, 2891, 2584, 2038, 1467, + 1139, 1151, 1352, 1496, 1473, 1406, 1518, 1908, + 2452, 2917, 3161, 3218, 3188, 3073, 2747, 2108, + 1260, 527, 249, 531, 1175, 1844, 2318, 2594, + 2782, 2923, 2935, 2732, 2377, 2080, 2022, 2176, + 2305, 2168, 1744, 1261, 1006, 1094, 1405, 1735, + 1989, 2229, 2534, 2852, 3006, 2864, 2498, 2159, + 2059, 2181, 2288, 2137, 1700, 1186, 861, 839, + 1049, 1375, 1794, 2366, 3076, 3715, 3966, 3636, + 2834, 1923, 1265, 989, 979, 1051, 1142, 1323, + 1650, 2041, 2319, 2386, 2341, 2398, 2670, 3025, + 3174, 2917, 2326, 1687, 1277, 1163, 1220, 1308, + 1418, 1633, 1980, 2323, 2461, 2326, 2084, 2016, + 2271, 2723, 3066, 3059, 2705, 2198, 1730, 1347, + 999, 697, 596, 878, 1557, 2395, 3041, 3286, + 3189, 2978, 2823, 2694, 2448, 2022, 1538, 1203 + }, + { + 1117, 1190, 1253, 1255, 1331, 1665, 2274, 2933, + 3330, 3305, 2964, 2552, 2241, 2014, 1766, 1479, + 1282, 1326, 1599, 1899, 1996, 1843, 1635, 1631, + 1925, 2370, 2721, 2850, 2827, 2790, 2766, 2626, + 2237, 1641, 1080, 811, 903, 1198, 1477, 1667, + 1883, 2264, 2785, 3234, 3381, 3179, 2793, 2430, + 2150, 1848, 1419, 930, 618, 693, 1149, 1751, + 2236, 2511, 2678, 2865, 3054, 3086, 2829, 2351, + 1891, 1661, 1666, 1723, 1652, 1461, 1331, 1421, + 1704, 1986, 2103, 2083, 2115, 2351, 2733, 3031, + 3045, 2777, 2407, 2101, 1865, 1577, 1177, 795, + 677, 970, 1568, 2188, 2594, 2767, 2863, 3009, + 3154, 3114, 2775, 2226, 1695, 1355, 1187, 1058, + 907, 856, 1104, 1712, 2486, 3090, 3293, 3127, + 2813, 2546, 2345, 2112, 1804, 1533, 1464, 1633, + 1869, 1930, 1727, 1422, 1300, 1520, 1986, 2451, + 2733, 2842, 2898, 2949, 2891, 2584, 2038, 1467, + 1139, 1151, 1352, 1496, 1473, 1406, 1518, 1908, + 2452, 2917, 3161, 3218, 3188, 3073, 2747, 2108, + 1260, 527, 249, 531, 1175, 1844, 2318, 2594, + 2782, 2923, 2935, 2732, 2377, 2080, 2022, 2176, + 2305, 2168, 1744, 1261, 1006, 1094, 1405, 1735, + 1989, 2229, 2534, 2852, 3006, 2864, 2498, 2159, + 2059, 2181, 2288, 2137, 1700, 1186, 861, 839, + 1049, 1375, 1794, 2366, 3076, 3715, 3966, 3636, + 2834, 1923, 1265, 989, 979, 1051, 1142, 1323, + 1650, 2041, 2319, 2386, 2341, 2398, 2670, 3025, + 3174, 2917, 2326, 1687, 1277, 1163, 1220, 1308, + 1418, 1633, 1980, 2323, 2461, 2326, 2084, 2016, + 2271, 2723, 3066, 3059, 2705, 2198, 1730, 1347, + 999, 697, 596, 878, 1557, 2395, 3041, 3286, + 3189, 2978, 2823, 2694, 2448, 2022, 1538, 1203 + }, + { + 1718, 1921, 1999, 1656, 1132, 1032, 1712, 2848, + 3643, 3512, 2596, 1623, 1246, 1506, 1915, 2017, + 1844, 1803, 2145, 2612, 2653, 2019, 1111, 688, + 1190, 2308, 3242, 3398, 2864, 2229, 1969, 2022, + 1965, 1564, 1094, 1081, 1711, 2557, 2915, 2470, + 1625, 1150, 1483, 2345, 3029, 3067, 2612, 2185, + 2096, 2139, 1883, 1234, 647, 732, 1629, 2782, + 3379, 3061, 2216, 1596, 1624, 2069, 2372, 2248, + 1953, 1942, 2320, 2666, 2456, 1648, 817, 673, + 1391, 2432, 3022, 2838, 2248, 1891, 2042, 2394, + 2450, 2085, 1692, 1745, 2251, 2681, 2470, 1618, + 757, 605, 1314, 2340, 2962, 2917, 2559, 2405, + 2574, 2687, 2333, 1581, 995, 1097, 1825, 2543, + 2617, 2016, 1334, 1217, 1764, 2469, 2751, 2515, + 2186, 2209, 2546, 2708, 2296, 1481, 909, 1099, + 1922, 2684, 2761, 2163, 1491, 1343, 1761, 2265, + 2393, 2177, 2070, 2401, 2954, 3126, 2538, 1473, + 689, 746, 1508, 2285, 2490, 2151, 1804, 1902, + 2355, 2664, 2482, 2010, 1796, 2145, 2747, 2934, + 2340, 1301, 593, 739, 1553, 2355, 2620, 2417, + 2233, 2394, 2701, 2669, 2100, 1381, 1161, 1710, + 2604, 3073, 2700, 1796, 1093, 1072, 1566, 2017, + 2081, 1946, 2065, 2586, 3118, 3090, 2358, 1432, + 1049, 1496, 2335, 2804, 2518, 1780, 1244, 1274, + 1656, 1913, 1860, 1810, 2187, 2986, 3642, 3514, + 2517, 1276, 618, 874, 1639, 2210, 2240, 1983, + 1918, 2192, 2465, 2316, 1768, 1353, 1601, 2477, + 3320, 3416, 2637, 1569, 968, 1111, 1625, 1943, + 1888, 1782, 2016, 2544, 2867, 2552, 1738, 1103, + 1261, 2175, 3150, 3442, 2895, 2013, 1437, 1358, + 1450, 1342, 1089, 1143, 1827, 2881, 3588, 3398, + 2455, 1508, 1250, 1731, 2377, 2578, 2246, 1815 + }, + { + 1956, 2312, 2492, 2158, 1587, 1440, 2075, 3103, + 3686, 3310, 2251, 1289, 964, 1148, 1318, 1207, + 1102, 1470, 2337, 3132, 3196, 2466, 1596, 1370, + 1972, 2846, 3266, 3016, 2500, 2211, 2166, 1932, + 1202, 279, 0, 514, 1825, 2970, 3298, 2911, + 2460, 2438, 2721, 2794, 2395, 1846, 1708, 2128, + 2613, 2496, 1639, 644, 310, 889, 1878, 2537, + 2593, 2411, 2483, 2835, 2993, 2546, 1687, 1118, + 1375, 2266, 3014, 2986, 2268, 1526, 1315, 1565, + 1757, 1572, 1273, 1419, 2191, 3093, 3371, 2751, + 1734, 1144, 1359, 2019, 2463, 2416, 2209, 2316, + 2752, 2995, 2547, 1529, 660, 598, 1311, 2116, + 2356, 2015, 1666, 1816, 2379, 2798, 2684, 2258, + 2113, 2543, 3164, 3261, 2510, 1347, 574, 613, + 1161, 1574, 1564, 1455, 1755, 2519, 3211, 3232, + 2567, 1849, 1757, 2343, 2992, 3048, 2449, 1737, + 1454, 1580, 1619, 1216, 628, 520, 1267, 2504, + 3408, 3450, 2855, 2318, 2281, 2532, 2517, 2013, + 1407, 1298, 1822, 2459, 2530, 1902, 1140, 958, + 1517, 2286, 2609, 2356, 2002, 2057, 2485, 2743, + 2396, 1643, 1184, 1516, 2413, 3111, 3038, 2338, + 1674, 1530, 1760, 1837, 1500, 1087, 1183, 1941, + 2834, 3122, 2577, 1723, 1337, 1707, 2410, 2796, + 2657, 2373, 2410, 2734, 2807, 2177, 1045, 176, + 210, 1065, 2032, 2466, 2362, 2242, 2514, 3006, + 3170, 2727, 2032, 1745, 2140, 2771, 2886, 2175, + 1096, 437, 583, 1209, 1704, 1825, 1894, 2338, + 3102, 3601, 3299, 2321, 1415, 1285, 1930, 2673, + 2829, 2339, 1732, 1513, 1639, 1648, 1264, 805, + 906, 1822, 3065, 3773, 3486, 2550, 1755, 1582, + 1830, 1959, 1751, 1543, 1806, 2530, 3118, 2944, + 2015, 1030, 751, 1302, 2097, 2453, 2239, 1915 + }, + { + 1964, 2362, 2559, 2189, 1568, 1414, 2067, 3059, + 3526, 3046, 2033, 1276, 1149, 1327, 1288, 987, + 936, 1584, 2708, 3521, 3425, 2621, 1903, 1856, + 2309, 2599, 2335, 1808, 1611, 1918, 2247, 1998, + 1166, 443, 549, 1503, 2603, 3140, 3062, 2903, + 3077, 3364, 3157, 2203, 1000, 375, 684, 1474, + 1982, 1920, 1700, 1887, 2497, 2950, 2717, 1961, + 1425, 1673, 2496, 3112, 2972, 2281, 1721, 1683, + 1882, 1764, 1217, 782, 1086, 2110, 3112, 3324, + 2695, 1899, 1625, 1901, 2178, 2031, 1671, 1687, + 2317, 3076, 3199, 2439, 1367, 825, 1111, 1751, + 2065, 1899, 1721, 2001, 2610, 2919, 2518, 1731, + 1353, 1830, 2779, 3352, 3069, 2250, 1598, 1445, + 1472, 1203, 669, 468, 1120, 2420, 3528, 3741, + 3144, 2457, 2266, 2453, 2438, 1916, 1254, 1094, + 1614, 2272, 2351, 1722, 1001, 913, 1554, 2336, + 2649, 2506, 2458, 2890, 3503, 3576, 2750, 1475, + 615, 626, 1170, 1560, 1528, 1462, 1874, 2718, + 3334, 3129, 2236, 1437, 1396, 2018, 2602, 2606, + 2183, 1928, 2145, 2474, 2310, 1544, 781, 764, + 1596, 2598, 2979, 2593, 2012, 1853, 2129, 2320, + 2047, 1576, 1549, 2236, 3140, 3434, 2781, 1683, + 980, 1029, 1443, 1618, 1441, 1379, 1878, 2749, + 3283, 2983, 2126, 1531, 1738, 2479, 2991, 2808, + 2197, 1776, 1790, 1858, 1476, 702, 214, 644, + 1885, 3131, 3627, 3348, 2903, 2803, 2914, 2686, + 1876, 935, 595, 1104, 1936, 2317, 2009, 1510, + 1471, 1978, 2486, 2467, 2030, 1820, 2285, 3129, + 3560, 3092, 2049, 1221, 1077, 1352, 1459, 1214, + 1058, 1522, 2535, 3375, 3355, 2530, 1651, 1420, + 1826, 2259, 2233, 1913, 1866, 2338, 2895, 2850, + 2036, 1061, 736, 1277, 2114, 2503, 2272, 1916 + }, + { + 1639, 1664, 1562, 1341, 1360, 1915, 2829, 3528, + 3547, 2949, 2219, 1761, 1548, 1288, 877, 621, + 938, 1861, 2903, 3446, 3282, 2734, 2268, 2022, + 1771, 1321, 868, 873, 1570, 2635, 3406, 3454, + 2920, 2299, 1919, 1689, 1347, 896, 694, 1077, + 1938, 2737, 2992, 2720, 2385, 2390, 2662, 2769, + 2419, 1793, 1356, 1365, 1621, 1732, 1581, 1463, + 1732, 2345, 2832, 2753, 2162, 1583, 1512, 1960, + 2502, 2750, 2711, 2665, 2725, 2631, 2028, 958, + 0, 0, 496, 1736, 2834, 3458, 3723, 3841, + 3752, 3184, 2069, 822, 110, 289, 1094, 1902, + 2304, 2395, 2518, 2782, 2906, 2557, 1804, 1148, + 1076, 1597, 2255, 2598, 2593, 2554, 2689, 2805, + 2511, 1715, 836, 485, 898, 1731, 2409, 2656, + 2660, 2728, 2863, 2746, 2156, 1334, 853, 1093, + 1868, 2596, 2846, 2685, 2489, 2460, 2405, 2012, + 1304, 722, 730, 1335, 2064, 2430, 2399, 2364, + 2665, 3183, 3442, 3110, 2344, 1619, 1245, 1108, + 918, 647, 646, 1270, 2402, 3433, 3752, 3276, + 2479, 1920, 1759, 1753, 1669, 1610, 1864, 2469, + 3015, 2959, 2167, 1103, 447, 518, 1081, 1689, + 2157, 2652, 3327, 3959, 4051, 3323, 2069, 966, + 513, 658, 980, 1199, 1437, 1979, 2804, 3469, + 3484, 2808, 1918, 1372, 1319, 1472, 1526, 1535, + 1822, 2522, 3289, 3542, 3008, 2017, 1205, 958, + 1133, 1343, 1427, 1594, 2085, 2776, 3197, 2987, + 2297, 1689, 1605, 1967, 2306, 2280, 2009, 1884, + 2086, 2358, 2294, 1817, 1301, 1203, 1573, 2011, + 2103, 1872, 1753, 2114, 2839, 3420, 3451, 2996, + 2439, 2029, 1639, 1019, 242, 0, 205, 1436, + 2883, 3816, 3952, 3559, 3062, 2600, 2024, 1278, + 664, 643, 1346, 2343, 2958, 2854, 2286, 1788 + }, + { + 1664, 1710, 1621, 1407, 1442, 2003, 2873, 3465, + 3372, 2745, 2084, 1708, 1489, 1146, 713, 612, + 1202, 2315, 3312, 3633, 3266, 2647, 2153, 1768, + 1286, 760, 609, 1212, 2410, 3513, 3856, 3344, + 2445, 1678, 1182, 798, 495, 559, 1284, 2512, + 3601, 3926, 3426, 2610, 2030, 1793, 1607, 1266, + 968, 1098, 1726, 2439, 2713, 2438, 2006, 1863, + 2044, 2194, 2047, 1785, 1847, 2396, 3057, 3245, + 2741, 1890, 1225, 956, 880, 784, 811, 1334, + 2449, 3684, 4095, 4001, 3035, 2052, 1429, 1079, + 781, 592, 827, 1619, 2608, 3172, 2997, 2384, + 1932, 1937, 2162, 2183, 1912, 1690, 1855, 2317, + 2620, 2441, 1951, 1617, 1681, 1910, 1901, 1595, + 1381, 1666, 2386, 3011, 3069, 2603, 2079, 1865, + 1879, 1787, 1488, 1298, 1590, 2308, 2924, 2932, + 2348, 1676, 1389, 1493, 1645, 1637, 1660, 2042, + 2762, 3350, 3316, 2665, 1904, 1532, 1564, 1603, + 1355, 1002, 995, 1531, 2303, 2818, 2898, 2809, + 2868, 3011, 2849, 2155, 1229, 689, 883, 1548, + 2098, 2207, 2062, 2049, 2261, 2408, 2227, 1862, + 1767, 2190, 2838, 3128, 2766, 2035, 1479, 1347, + 1410, 1328, 1118, 1157, 1721, 2593, 3217, 3234, + 2828, 2472, 2390, 2340, 1956, 1257, 718, 808, + 1498, 2286, 2699, 2716, 2652, 2684, 2608, 2120, + 1299, 686, 820, 1690, 2713, 3260, 3186, 2822, + 2502, 2202, 1692, 990, 515, 722, 1593, 2569, + 3045, 2906, 2541, 2359, 2356, 2214, 1783, 1351, + 1368, 1923, 2586, 2811, 2473, 1952, 1679, 1683, + 1634, 1326, 1011, 1176, 1997, 3075, 3770, 3769, + 3287, 2713, 2162, 1452, 521, 0, 0, 704, + 2221, 3469, 3925, 3689, 3199, 2718, 2167, 1448, + 794, 672, 1285, 2261, 2912, 2846, 2291, 1798 + }, + { + 1007, 1856, 3088, 3141, 1847, 693, 1019, 2402, + 3221, 2669, 1652, 1511, 2265, 2661, 1926, 902, + 1029, 2441, 3641, 3260, 1719, 730, 1238, 2375, + 2679, 1956, 1422, 1994, 3006, 3042, 1827, 706, + 1023, 2433, 3287, 2649, 1408, 1118, 2052, 2925, + 2601, 1546, 1185, 2010, 2913, 2633, 1438, 857, + 1747, 3148, 3408, 2207, 934, 975, 2063, 2745, + 2291, 1564, 1775, 2782, 3198, 2211, 766, 519, + 1815, 3231, 3271, 2120, 1291, 1679, 2511, 2481, + 1542, 991, 1744, 3042, 3318, 2172, 930, 1040, + 2298, 3130, 2564, 1398, 1127, 2028, 2866, 2544, + 1544, 1280, 2202, 3139, 2764, 1349, 530, 1323, + 2864, 3450, 2579, 1454, 1382, 2157, 2479, 1781, + 1038, 1485, 2882, 3653, 2796, 1178, 554, 1486, + 2736, 2860, 1960, 1411, 1992, 2872, 2739, 1593, + 829, 1472, 2813, 3235, 2228, 1036, 1114, 2328, + 3157, 2624, 1479, 1185, 2020, 2769, 2363, 1324, + 1121, 2227, 3406, 3187, 1710, 604, 1030, 2335, + 2953, 2368, 1638, 1880, 2743, 2873, 1777, 620, + 857, 2375, 3534, 3105, 1716, 1022, 1666, 2595, + 2523, 1612, 1201, 1986, 3034, 2956, 1739, 846, + 1407, 2768, 3270, 2302, 1044, 990, 2114, 2978, + 2598, 1645, 1484, 2330, 2945, 2295, 996, 656, + 1854, 3341, 3494, 2243, 1092, 1233, 2166, 2501, + 1839, 1266, 1837, 3059, 3406, 2261, 808, 665, + 1934, 3095, 2878, 1764, 1266, 1962, 2817, 2600, + 1538, 1039, 1834, 2968, 2975, 1770, 819, 1333, + 2738, 3371, 2522, 1266, 1073, 1987, 2681, 2254, + 1408, 1483, 2608, 3416, 2742, 1172, 431, 1320, + 2771, 3183, 2343, 1540, 1807, 2599, 2598, 1556, + 737, 1323, 2823, 3559, 2693, 1261, 902, 1879, + 2844, 2605, 1599, 1244, 2041, 2919, 2658, 1531 + }, + { + 1940, 2558, 3310, 3167, 1867, 350, 0, 1062, + 2800, 3765, 3383, 2325, 1683, 1824, 2122, 1810, + 973, 562, 1363, 3030, 4095, 3948, 2338, 733, + 312, 1081, 2042, 2327, 2055, 2043, 2730, 3541, + 3433, 2069, 354, 0, 660, 2465, 3674, 3555, + 2627, 1952, 1980, 2174, 1778, 840, 310, 1054, + 2820, 4095, 4095, 2750, 1016, 328, 870, 1758, + 2102, 1931, 2002, 2773, 3699, 3704, 2351, 483, + 0, 332, 2127, 3511, 3617, 2819, 2147, 2119, + 2272, 1849, 837, 165, 780, 2548, 4095, 4095, + 3056, 1293, 441, 815, 1624, 1964, 1795, 1856, + 2655, 3707, 3898, 2665, 738, 0, 137, 1836, + 3299, 3559, 2871, 2228, 2206, 2400, 2025, 983, + 161, 577, 2243, 3964, 4095, 3212, 1509, 607, + 911, 1683, 1987, 1722, 1634, 2344, 3478, 3919, + 2958, 1144, 0, 179, 1657, 3024, 3299, 2677, + 2126, 2247, 2633, 2411, 1352, 294, 368, 1792, + 3522, 4095, 3306, 1795, 924, 1157, 1829, 2014, + 1589, 1330, 1958, 3199, 3921, 3260, 1583, 231, + 275, 1525, 2778, 3042, 2448, 1949, 2189, 2781, + 2774, 1790, 573, 315, 1429, 3049, 3826, 3210, + 1931, 1202, 1494, 2155, 2234, 1577, 1016, 1432, + 2711, 3741, 3497, 2102, 754, 565, 1507, 2523, + 2671, 2061, 1640, 2072, 2958, 3236, 2353, 953, + 300, 1029, 2487, 3382, 3051, 2056, 1509, 1878, + 2532, 2499, 1601, 718, 888, 2167, 3485, 3671, + 2604, 1315, 927, 1562, 2316, 2308, 1645, 1274, + 1887, 3079, 3677, 2945, 1400, 361, 677, 1927, + 2902, 2843, 2138, 1788, 2244, 2901, 2778, 1670, + 489, 408, 1648, 3195, 3762, 3008, 1804, 1276, + 1670, 2211, 2062, 1311, 912, 1616, 3052, 3976, + 3474, 1900, 566, 489, 1470, 2418, 2532, 2072 + }, + { + 2305, 1950, 1626, 1814, 2468, 2972, 2698, 1651, + 599, 493, 1629, 3299, 4095, 3750, 2036, 322, + 0, 716, 2337, 3494, 3539, 2733, 1873, 1551, + 1713, 1874, 1704, 1400, 1477, 2176, 3100, 3465, + 2796, 1444, 411, 557, 1859, 3357, 3885, 3012, + 1398, 273, 466, 1773, 3173, 3670, 3055, 1956, + 1225, 1225, 1645, 1927, 1865, 1776, 2102, 2843, + 3423, 3156, 1941, 508, 0, 771, 2528, 3975, + 4081, 2811, 1147, 304, 788, 2069, 3085, 3132, + 2367, 1558, 1356, 1763, 2238, 2291, 1965, 1758, + 2067, 2709, 3020, 2475, 1275, 311, 477, 1870, + 3595, 4095, 3648, 1838, 238, 0, 953, 2472, + 3385, 3239, 2444, 1786, 1701, 1974, 2076, 1773, + 1386, 1465, 2176, 3031, 3252, 2491, 1234, 486, + 945, 2362, 3668, 3808, 2604, 928, 25, 542, + 2045, 3415, 3744, 2992, 1892, 1252, 1307, 1669, + 1826, 1700, 1681, 2158, 2993, 3517, 3093, 1773, + 411, 53, 1073, 2800, 3984, 3764, 2346, 833, + 342, 1140, 2499, 3344, 3124, 2182, 1357, 1230, + 1687, 2150, 2196, 1957, 1926, 2378, 2991, 3078, + 2252, 913, 57, 492, 2102, 3831, 4095, 3481, + 1632, 203, 113, 1246, 2634, 3287, 2946, 2155, + 1671, 1781, 2137, 2202, 1837, 1454, 1587, 2295, + 3011, 3008, 2101, 926, 482, 1281, 2841, 3994, + 3798, 2312, 588, 0, 597, 2192, 3484, 3681, + 2895, 1901, 1409, 1511, 1759, 1733, 1500, 1531, + 2148, 3075, 3557, 3017, 1650, 404, 259, 1409, + 3036, 3917, 3390, 1883, 571, 434, 1497, 2873, + 3520, 3065, 2014, 1233, 1196, 1675, 2076, 2072, + 1891, 2018, 2606, 3204, 3117, 2089, 689, 0, + 611, 2318, 3929, 4095, 3162, 1386, 241, 446, + 1669, 2875, 3209, 2628, 1811, 1479, 1772, 2227 + }, + { + 2335, 1960, 1685, 1991, 2665, 2957, 2364, 1256, + 1187, 675, 1385, 2969, 4095, 3891, 2178, 296, + 0, 858, 2528, 3499, 3277, 2384, 1687, 1864, + 1755, 1891, 1800, 1493, 1474, 2117, 3086, 3446, + 2627, 1190, 321, 799, 2247, 3423, 3310, 3107, + 1738, 395, 255, 1464, 3033, 3737, 3149, 1995, + 1297, 1347, 1704, 1834, 1723, 1823, 2108, 2639, + 3261, 3208, 2125, 617, 0, 748, 2661, 4066, + 3914, 2447, 933, 547, 1394, 1601, 2804, 3229, + 2646, 1734, 1332, 1636, 2113, 2142, 1819, 1735, + 2218, 2881, 2971, 2189, 1720, 621, 355, 1441, + 3232, 4095, 3802, 1959, 273, 50, 1212, 2640, + 3225, 2756, 1910, 2316, 1840, 1897, 2026, 1814, + 1434, 1470, 2204, 3124, 3256, 2304, 984, 435, + 1171, 2551, 3314, 3642, 2920, 1289, 77, 298, + 1775, 3318, 3760, 2948, 1844, 1312, 1466, 1796, + 1872, 1825, 1577, 1917, 2711, 3406, 3216, 1970, + 487, 10, 1148, 2954, 3986, 3485, 1998, 851, + 972, 994, 2116, 3181, 3271, 2421, 1473, 1207, + 1641, 2110, 2109, 1863, 1914, 2408, 2823, 2479, + 2808, 1550, 347, 282, 1634, 3479, 4095, 3526, + 1607, 217, 326, 1591, 2839, 3159, 2604, 1942, + 1762, 1656, 1999, 2221, 1988, 1609, 1694, 2407, + 3070, 2862, 1756, 638, 549, 1686, 3126, 3294, + 3719, 2662, 912, 0, 407, 2032, 3459, 3612, + 2747, 1800, 1467, 1676, 1899, 1861, 1595, 1503, + 1915, 2795, 3437, 3078, 1735, 392, 309, 1631, + 3271, 3888, 3033, 1515, 651, 866, 1341, 2604, + 3487, 3253, 2196, 1262, 1125, 1617, 2009, 1977, + 1857, 2125, 2738, 3044, 2446, 2512, 1180, 155, + 433, 2025, 3791, 4095, 3137, 1246, 193, 622, + 1932, 2950, 3001, 2393, 2115, 1507, 1558, 1991 + }, + { + 2299, 1606, 1862, 2187, 2600, 3114, 2824, 819, + 742, 762, 1777, 2857, 3979, 4095, 2607, 70, + 0, 1274, 2290, 3296, 3402, 2624, 1883, 2093, + 1423, 1682, 1942, 1277, 1503, 2618, 2805, 3895, + 2249, 1512, 0, 904, 1903, 3739, 3659, 3477, + 1378, 119, 643, 1169, 2648, 4095, 3128, 2162, + 1306, 1460, 1690, 1974, 1373, 1684, 1967, 3108, + 3257, 3304, 2323, 309, 7, 529, 2826, 4095, + 3817, 2606, 606, 565, 1564, 1755, 2924, 3206, + 2565, 1884, 1147, 1262, 2231, 2237, 2195, 2100, + 1944, 2626, 3225, 1916, 1444, 924, 395, 1723, + 3132, 4095, 3586, 1748, 42, 268, 1482, 2742, + 3110, 2570, 2025, 2385, 1828, 2180, 1616, 1958, + 1380, 1703, 2019, 3249, 3581, 2116, 685, 199, + 1554, 2900, 3289, 3588, 2850, 1045, 0, 597, + 1989, 3292, 3640, 3076, 1633, 1156, 1650, 2200, + 1884, 1603, 1349, 2034, 2754, 3521, 3437, 1599, + 744, 0, 1040, 3065, 4095, 3458, 1782, 963, + 997, 977, 1824, 3559, 3467, 2488, 1558, 699, + 1750, 1983, 2306, 1793, 2240, 2704, 2237, 2629, + 2939, 1330, 530, 545, 1391, 3086, 4095, 3624, + 1583, 443, 206, 1788, 2457, 3132, 2913, 1810, + 1654, 1539, 2375, 2330, 2305, 1378, 1366, 2269, + 3182, 3207, 1447, 648, 813, 1931, 3069, 3286, + 3459, 2647, 833, 0, 589, 2201, 3797, 3585, + 2499, 1455, 1353, 2169, 2045, 1862, 1599, 1248, + 1735, 3087, 3519, 3073, 1783, 586, 403, 1230, + 3053, 4030, 3230, 1553, 814, 1012, 1239, 2409, + 3612, 3022, 2454, 988, 1344, 1690, 2015, 2311, + 1661, 1882, 2970, 3096, 2259, 2286, 1362, 415, + 382, 2202, 4077, 4095, 2592, 1052, 470, 805, + 2008, 3117, 3179, 2167, 1896, 1466, 1818, 2081 + }, + { + 1966, 2056, 2324, 2444, 1716, 1440, 1465, 1652, + 1875, 2034, 2094, 2076, 2037, 2105, 2583, 1888, + 994, 1008, 1565, 2138, 2414, 2398, 2270, 2152, + 2001, 1726, 1370, 1159, 1325, 1872, 2502, 2825, + 2599, 1908, 1177, 1358, 1754, 1897, 1956, 1973, + 1965, 1970, 2000, 2020, 1980, 1914, 1867, 1698, + 1633, 1822, 2021, 2054, 1931, 1831, 1905, 2094, + 2140, 1824, 1297, 1964, 2188, 1828, 1576, 2128, + 2255, 1961, 1600, 1533, 1823, 2209, 2347, 2115, + 1705, 1447, 1526, 1839, 2117, 2168, 2035, 1919, + 1948, 2041, 1998, 1724, 1392, 1362, 1896, 2811, + 2122, 1739, 1726, 1901, 2062, 2040, 1867, 1669, + 1531, 1527, 1740, 2238, 2702, 2377, 1984, 1563, + 1305, 1376, 1742, 2165, 2333, 2139, 1788, 1624, + 1819, 2208, 2414, 2176, 1596, 1106, 1087, 1600, + 2354, 2838, 2758, 2219, 1598, 1247, 1250, 1468, + 1734, 2029, 2451, 2851, 2030, 1593, 1481, 1600, + 1808, 1954, 2009, 2012, 1969, 1886, 1800, 1768, + 1812, 1937, 2247, 2475, 1925, 1398, 1223, 1479, + 1957, 2335, 2421, 2267, 2054, 1870, 1614, 1148, + 1402, 2051, 2361, 2381, 2151, 1806, 1621, 1674, + 1793, 1900, 1995, 2059, 2054, 1959, 1750, 1419, + 1732, 2123, 2329, 2207, 1857, 1571, 1594, 1896, + 2180, 2116, 1639, 1438, 1959, 2116, 2093, 2051, + 2049, 2037, 1956, 1739, 1214, 911, 2104, 2666, + 2618, 2292, 1979, 1758, 1557, 1351, 1268, 1485, + 2014, 2601, 2861, 2571, 1885, 1233, 989, 1278, + 1853, 2301, 2449, 2380, 2080, 1765, 1562, 1513, + 1617, 1930, 2552, 2071, 1735, 1723, 1797, 1809, + 1807, 1898, 2059, 2111, 2091, 2188, 1924, 1185, + 1048, 1869, 2546, 2656, 2239, 1647, 1338, 1500, + 1926, 2232, 2194, 1935, 1853, 1585, 1647, 1843 + }, + { + 1659, 2675, 2749, 995, 2173, 1940, 1758, 1737, + 1805, 1884, 1945, 2020, 2163, 2406, 1786, 2321, + 991, 844, 1698, 2413, 2642, 2402, 2020, 1879, + 1873, 1701, 1340, 1179, 1629, 2362, 2546, 2823, + 2611, 635, 1054, 2099, 1830, 1970, 2091, 2189, + 2174, 2003, 1706, 1379, 1301, 1802, 2504, 3525, + 1931, 631, 1107, 1894, 2188, 2207, 2261, 2251, + 1696, 718, 3108, 1636, 1614, 2164, 1962, 1527, + 2214, 2001, 1463, 1379, 1962, 2680, 2826, 2236, + 1296, 814, 1099, 1902, 2559, 2590, 2142, 1841, + 1891, 2012, 1954, 1594, 1161, 1342, 2876, 1538, + 2388, 2161, 1968, 1905, 1876, 1872, 1781, 1648, + 1622, 1774, 2024, 1808, 1350, 3460, 2891, 1498, + 1072, 1273, 1372, 1966, 2476, 2263, 1679, 1448, + 1930, 2703, 2997, 2280, 930, 682, 802, 982, + 2550, 3717, 3622, 2527, 1167, 573, 651, 1194, + 2057, 3027, 3472, 328, 2460, 2176, 1868, 1735, + 1734, 1783, 1780, 1757, 1784, 1880, 2039, 2201, + 2229, 2073, 1483, 1629, 2971, 1691, 851, 1072, + 1864, 2609, 2790, 2451, 1961, 1515, 1103, 1847, + 2014, 1647, 1888, 2020, 2063, 2184, 2102, 1878, + 1874, 1891, 1808, 1635, 1480, 1540, 2049, 3897, + 1024, 1088, 2025, 2385, 2069, 1655, 1649, 2000, + 2132, 1527, 1310, 2922, 1737, 1758, 1870, 1969, + 2088, 2176, 2080, 1699, 1295, 1033, 1600, 2820, + 2718, 2287, 1985, 1875, 1713, 1312, 1028, 1302, + 2030, 2858, 3103, 2414, 1614, 1352, 673, 1103, + 3016, 3299, 1642, 303, 1899, 2475, 2407, 2217, + 2137, 2046, 0, 2298, 2414, 2355, 2160, 1584, + 1115, 1349, 2022, 3000, 3585, 1751, 1024, 1398, + 0, 1191, 3177, 3342, 3377, 2277, 1124, 914, + 1094, 1158, 1371, 2973, 3320, 3253, 614, 540 + }, + { + 2099, 2469, 2236, 702, 2306, 2265, 1928, 1672, + 1726, 1987, 2127, 1964, 1717, 1825, 1554, 2705, + 1775, 1502, 1837, 2050, 2091, 1947, 1738, 1739, + 1928, 2072, 2002, 1816, 1805, 1889, 1699, 2154, + 2518, 1076, 1654, 2496, 1911, 1823, 1821, 1849, + 1867, 1940, 2050, 1998, 1745, 1642, 1760, 2739, + 1747, 1219, 1994, 2375, 1945, 1549, 1785, 2277, + 2037, 959, 3051, 1449, 1562, 2284, 2050, 1433, + 2072, 2097, 1863, 1753, 1851, 1981, 1988, 1929, + 1821, 1824, 1884, 1978, 2013, 1910, 1751, 1793, + 1972, 2055, 2014, 1821, 1560, 1700, 2938, 1246, + 1937, 1827, 1891, 2013, 2000, 1913, 1785, 1739, + 1875, 2124, 2270, 1727, 862, 2745, 2341, 1478, + 1641, 2081, 1896, 1913, 2030, 1912, 1750, 1767, + 1969, 2110, 2036, 1726, 1441, 2175, 2393, 1596, + 1717, 1928, 1974, 1960, 1874, 1981, 1892, 1671, + 1728, 2290, 2824, 56, 2531, 2354, 1939, 1671, + 1684, 1912, 2091, 2064, 1866, 1685, 1736, 2015, + 2225, 2101, 1361, 1380, 2857, 1977, 1503, 1703, + 2007, 2108, 1943, 1793, 1857, 1922, 1671, 2226, + 2096, 1558, 1797, 1981, 2008, 2034, 1869, 1668, + 1813, 2043, 2128, 1982, 1677, 1472, 1753, 3561, + 869, 1194, 2258, 2509, 1963, 1436, 1561, 2174, + 2442, 1702, 1200, 2655, 1589, 1862, 2067, 1960, + 1757, 1756, 1974, 2111, 2016, 1591, 1633, 2335, + 2028, 1730, 1723, 1922, 2063, 1955, 1810, 1841, + 1901, 1979, 1939, 1732, 1897, 2363, 1614, 1272, + 2407, 2579, 1525, 879, 2556, 2497, 1674, 1351, + 1926, 2700, 844, 2684, 1928, 1498, 1787, 2108, + 2115, 1928, 1585, 1766, 2412, 1472, 1850, 2833, + 998, 1559, 2529, 2010, 2009, 1560, 1460, 2158, + 2552, 1961, 1049, 1816, 2175, 2885, 1132, 1374 + }, + { + 2298, 2981, 1544, 1907, 2114, 2357, 2312, 2031, + 1922, 2051, 2257, 2329, 2136, 1889, 1951, 2330, + 2524, 1904, 1503, 2689, 2381, 1845, 1847, 2222, + 2478, 2244, 1733, 1671, 2468, 3711, 0, 2679, + 2483, 2319, 2099, 1806, 1780, 2394, 3172, 907, + 2428, 2019, 1976, 3332, 949, 2022, 2567, 2323, + 1942, 1935, 2190, 2256, 2131, 2022, 2136, 2259, + 2068, 1982, 2103, 2405, 2424, 1147, 2599, 2418, + 2080, 1906, 1999, 2236, 2336, 2151, 1935, 1952, + 2363, 2253, 1921, 2191, 2200, 1994, 1982, 2335, + 2577, 1839, 774, 4095, 1331, 2647, 760, 2895, + 2687, 1875, 1701, 2040, 2404, 2410, 2086, 1796, + 1879, 2320, 2724, 2512, 11, 3311, 3102, 1436, + 1248, 3032, 2012, 2081, 2195, 1962, 2073, 2353, + 2250, 1298, 3430, 1288, 2013, 2392, 2304, 2042, + 1870, 2446, 1774, 2216, 2566, 1933, 1739, 2235, + 2345, 2240, 2076, 1867, 2092, 2289, 2236, 2183, + 2067, 1880, 1944, 2478, 2615, 1919, 1406, 1820, + 3158, 2882, 1131, 777, 3423, 2936, 1687, 1391, + 1985, 2647, 2670, 1894, 950, 3538, 1441, 2122, + 2405, 2205, 1920, 1914, 2189, 2417, 2283, 1842, + 1983, 2034, 2172, 2886, 2024, 916, 2464, 2887, + 2448, 1253, 1916, 2446, 2377, 2219, 2125, 1761, + 1342, 3767, 1742, 1619, 2008, 2362, 2340, 2127, + 1995, 1992, 2119, 2263, 2278, 2123, 1862, 1684, + 3480, 1143, 1973, 2577, 2351, 1813, 1654, 2372, + 3429, 458, 2493, 2385, 2266, 2090, 1932, 2110, + 1759, 3261, 1250, 2307, 2104, 1810, 2959, 1710, + 1826, 2277, 2319, 2116, 2022, 2111, 2165, 2106, + 2081, 2200, 2374, 2014, 1103, 3510, 1988, 1764, + 1659, 2400, 2848, 1755, 1832, 1996, 2283, 2580, + 2140, 1399, 2388, 2249, 2290, 2145, 2045, 1628 + }, + { + 1924, 2444, 2813, 2991, 2986, 2843, 2628, 2452, + 2434, 2498, 2306, 1709, 1257, 1437, 1788, 1893, + 1862, 1859, 1900, 1934, 1937, 2067, 2535, 3037, + 2605, 1507, 2993, 4095, 2387, 1241, 1643, 1400, + 1577, 1690, 1700, 1583, 1320, 1297, 897, 4095, + 1859, 4095, 3945, 1699, 4095, 2586, 839, 274, + 2773, 861, 522, 638, 3159, 670, 3569, 3585, + 2275, 2822, 3052, 2773, 1831, 1291, 2065, 1950, + 1808, 1722, 1680, 1706, 1839, 2112, 2552, 3205, + 3077, 2986, 9, 2037, 2278, 2969, 1623, 247, + 814, 3418, 3028, 3659, 3881, 1185, 3474, 610, + 706, 1054, 1511, 1892, 2219, 2487, 2671, 2743, + 2690, 2535, 2346, 2195, 2099, 2027, 1929, 1766, + 1551, 1422, 1955, 3456, 1602, 1469, 1901, 2533, + 2937, 2774, 2129, 1705, 2157, 2768, 2283, 1411, + 1188, 1551, 2052, 2447, 2685, 2751, 2625, 2315, + 1913, 1593, 1500, 1659, 1967, 2259, 2430, 2493, + 2525, 2565, 2554, 2374, 1960, 1424, 1070, 1200, + 1881, 2674, 2940, 2849, 2779, 2370, 1681, 1327, + 1582, 2205, 2654, 2062, 1522, 2701, 2513, 2191, + 1971, 1869, 1866, 1953, 2125, 2366, 2612, 2655, + 1259, 2467, 2051, 1394, 2036, 1824, 2313, 2528, + 2549, 2764, 2979, 100, 3505, 2383, 1098, 570, + 3751, 1455, 1648, 1943, 2152, 2304, 2368, 2476, + 2677, 2783, 2720, 2510, 2188, 1792, 1355, 904, + 494, 1440, 749, 4095, 3212, 2926, 4095, 1520, + 2034, 1383, 1679, 1814, 1792, 1641, 1368, 1075, + 3968, 1321, 4081, 1908, 2868, 2153, 433, 2197, + 2089, 1958, 1946, 1979, 2098, 2196, 2320, 2614, + 2993, 3269, 3108, 2003, 630, 616, 1624, 1690, + 1185, 1322, 1960, 2600, 3081, 3429, 3627, 3562, + 3123, 2349, 1527, 976, 714, 658, 869, 1345 + }, + { + 1978, 2287, 2526, 2669, 2687, 2577, 2388, 2225, + 2197, 2323, 2481, 2505, 2388, 2223, 1976, 1694, + 1507, 1450, 1453, 1439, 1427, 1561, 2010, 2746, + 3403, 3628, 4078, 3807, 2389, 899, 1003, 1447, + 1671, 1739, 1691, 1522, 1184, 554, 648, 3083, + 3818, 3891, 3918, 3834, 3555, 2432, 1470, 767, + 771, 762, 962, 883, 941, 1513, 3249, 4000, + 3729, 3335, 2717, 2321, 2333, 2123, 1688, 1383, + 1269, 1282, 1383, 1574, 1866, 2260, 2766, 3457, + 4095, 3462, 1413, 1042, 1071, 1153, 780, 812, + 1586, 3041, 4083, 3878, 3731, 3467, 2518, 32, + 304, 967, 1415, 1780, 2103, 2382, 2594, 2715, + 2729, 2642, 2496, 2374, 2319, 2292, 2230, 2098, + 1878, 1568, 1256, 1339, 1443, 1902, 2434, 2940, + 3241, 3172, 2728, 2140, 1745, 1611, 1490, 1512, + 1766, 2091, 2349, 2503, 2567, 2543, 2416, 2195, + 1936, 1741, 1692, 1804, 2010, 2210, 2339, 2400, + 2437, 2471, 2465, 2345, 2074, 1728, 1483, 1520, + 1888, 2416, 2792, 2848, 2593, 2085, 1562, 1321, + 1470, 1907, 2449, 2909, 2959, 2629, 2217, 1945, + 1799, 1740, 1744, 1802, 1916, 2092, 2334, 2643, + 2867, 2610, 1676, 1174, 1590, 2542, 2417, 2057, + 2012, 2246, 2772, 2886, 2961, 2174, 1527, 927, + 1176, 1434, 1980, 2292, 2408, 2433, 2521, 2716, + 2869, 2872, 2728, 2479, 2159, 1797, 1417, 1020, + 551, 0, 965, 3313, 4095, 4095, 4036, 1891, + 1026, 1725, 2085, 2203, 2157, 1975, 1642, 1080, + 858, 1439, 3279, 3362, 2978, 2705, 2345, 2051, + 1614, 1552, 1722, 1899, 1989, 2034, 2174, 2497, + 2904, 3160, 3029, 2405, 1550, 993, 950, 1074, + 1350, 1848, 2358, 2732, 2971, 3126, 3193, 3108, + 2807, 2308, 1746, 1299, 1076, 1091, 1304, 1631 + }, + { + 1974, 2482, 2875, 3104, 3130, 2965, 2685, 2444, + 2398, 2432, 1941, 1529, 1311, 1281, 1417, 1638, + 1741, 1802, 1867, 1875, 1834, 1943, 2424, 3078, + 2950, 3018, 3414, 3767, 1893, 292, 1172, 1495, + 1619, 1650, 1618, 1519, 1311, 830, 542, 2902, + 3970, 3585, 3716, 4095, 3246, 2351, 1679, 1158, + 715, 432, 429, 557, 1153, 2006, 2746, 3118, + 3104, 2866, 2619, 2497, 2500, 2536, 2518, 2417, + 2251, 2029, 1729, 1335, 915, 637, 609, 848, + 1492, 2361, 3139, 3618, 3787, 3748, 3570, 3205, + 2516, 1447, 246, 0, 141, 0, 1344, 3608, + 3264, 2852, 2669, 2550, 2442, 2336, 2235, 2148, + 2085, 2047, 2016, 1955, 1850, 1735, 1654, 1631, + 1679, 1810, 2036, 2349, 2723, 2936, 2377, 1778, + 1434, 1578, 2217, 2631, 2160, 1995, 2078, 2414, + 2843, 2278, 1754, 1414, 1251, 1265, 1475, 1865, + 2337, 2726, 2890, 2798, 2540, 2262, 2057, 1923, + 1798, 1655, 1563, 1640, 1947, 2381, 2691, 2628, + 2133, 1456, 1160, 1408, 1536, 2233, 2960, 3266, + 3025, 2384, 1601, 1562, 1834, 1990, 2038, 2014, + 1962, 1916, 1895, 1901, 1924, 1944, 1932, 1833, + 1534, 1899, 2945, 3446, 3179, 2286, 1999, 2217, + 2057, 1587, 814, 1088, 1536, 1786, 1929, 2092, + 2305, 2494, 2576, 2539, 2454, 2421, 2474, 2546, + 2514, 2299, 1938, 1557, 1276, 1131, 1077, 1094, + 1249, 1656, 2360, 3211, 3866, 3997, 3421, 2169, + 772, 1352, 1724, 1879, 1916, 1860, 1692, 1325, + 485, 1603, 3374, 3302, 2657, 2380, 2388, 2362, + 1822, 1674, 1777, 1871, 1880, 1838, 1921, 2255, + 2723, 3033, 2863, 2051, 920, 840, 1432, 1622, + 1483, 1466, 2179, 2729, 3087, 3321, 3428, 3313, + 2880, 2155, 1339, 723, 458, 499, 853, 1398 + }, + { + 2279, 2196, 2046, 1841, 1621, 1468, 1478, 1682, + 1981, 2172, 2058, 1578, 1603, 1950, 2077, 2075, + 2013, 1946, 1898, 1848, 1763, 1631, 1488, 1448, + 1612, 1884, 2125, 2292, 2378, 2372, 2259, 2020, + 1630, 1020, 0, 1267, 2810, 2483, 2166, 2366, + 3306, 2194, 1046, 725, 1498, 1846, 1907, 1695, + 1498, 1747, 2090, 2433, 2596, 2448, 2018, 1500, + 1142, 1098, 1352, 1750, 2108, 2310, 2340, 2238, + 2048, 1801, 1550, 1398, 1482, 1896, 2603, 1967, + 1676, 1600, 1639, 1732, 1835, 1922, 2015, 2173, + 2124, 2066, 1991, 1537, 1367, 1433, 1626, 1856, + 2058, 2186, 2208, 2120, 1947, 1754, 1650, 1828, + 2055, 1266, 1253, 1769, 2332, 2499, 2108, 1342, + 1447, 2148, 2385, 2317, 2024, 1567, 936, 850, + 1389, 2093, 2694, 2927, 2690, 2117, 1485, 1062, + 1250, 1474, 1423, 1730, 2003, 2236, 2408, 2460, + 2333, 2031, 1654, 1353, 1243, 1334, 1540, 1754, + 1927, 2090, 2286, 2487, 2568, 2383, 1892, 1253, + 771, 729, 1201, 1984, 2690, 2961, 2668, 1948, + 1188, 1675, 1847, 1892, 1871, 1789, 1633, 1343, + 592, 1891, 3408, 2563, 2227, 1999, 1802, 1619, + 1456, 1343, 1324, 1459, 1807, 2286, 2475, 2255, + 2021, 1904, 1852, 1813, 1759, 1681, 1589, 1523, + 1555, 1773, 2269, 2057, 1921, 1968, 2072, 2100, + 2003, 1824, 1657, 1561, 1535, 1547, 1591, 1712, + 1955, 2290, 2567, 2580, 2192, 1458, 763, 1698, + 1995, 1819, 1036, 1630, 2202, 2731, 2993, 1909, + 1342, 1142, 1288, 1852, 2834, 1816, 1329, 1438, + 1885, 2275, 2331, 2041, 1606, 1686, 1699, 1684, + 1779, 1942, 2064, 2106, 2069, 1940, 1660, 1087, + 1472, 2026, 2215, 2204, 2118, 1966, 1691, 1679, + 1969, 2028, 1853, 1400, 1193, 1701, 2076, 2258 + }, + { + 2084, 2007, 2033, 2179, 2411, 2617, 2660, 2466, + 2097, 1732, 1555, 1632, 1858, 2024, 1955, 1623, + 1136, 625, 1234, 1712, 2121, 2454, 2702, 2873, + 2976, 3011, 2962, 2795, 2457, 1905, 1840, 2225, + 2377, 2208, 1524, 1695, 2066, 2151, 2080, 1907, + 1634, 1214, 462, 498, 1595, 2495, 3312, 2586, + 2206, 2032, 2016, 2142, 2357, 2511, 2491, 2398, + 2385, 2535, 2903, 2783, 2397, 2106, 1917, 1809, + 1778, 1839, 1977, 2104, 2076, 1772, 1187, 711, + 1265, 1519, 1606, 1578, 1443, 1129, 1080, 2214, + 3585, 4095, 3795, 3636, 3792, 3998, 2811, 1929, + 1447, 1217, 1030, 812, 683, 851, 1401, 2164, + 2767, 2855, 2327, 1433, 643, 374, 758, 1597, + 2511, 3177, 3493, 3554, 3493, 3321, 2894, 2032, + 1194, 1977, 2284, 2397, 2397, 2311, 2145, 1894, + 1549, 1075, 625, 1121, 1481, 1663, 1693, 1674, + 1732, 1935, 2244, 2554, 2771, 2876, 2920, 2957, + 2974, 2899, 2671, 2325, 2013, 1910, 2072, 2352, + 2441, 2048, 1087, 0, 824, 1237, 1469, 1617, + 1714, 1765, 1732, 1478, 1188, 3153, 4095, 4095, + 4095, 4095, 2770, 981, 1235, 1454, 1479, 1428, + 1319, 1132, 794, 25, 829, 2188, 2980, 3127, + 2836, 2442, 2205, 2192, 2294, 2361, 2327, 2242, + 2205, 2259, 2350, 2372, 2259, 2048, 1854, 1787, + 1878, 2061, 2231, 2314, 2296, 2191, 1991, 1659, + 1187, 672, 673, 528, 1256, 2661, 4095, 3440, + 3037, 2800, 2620, 2461, 2317, 2194, 2102, 2051, + 2043, 2043, 1976, 1822, 1654, 1532, 1474, 1475, + 1527, 1611, 1700, 1786, 1889, 2036, 2231, 2419, + 2501, 2470, 2431, 2455, 2562, 2770, 3156, 4014, + 3029, 1936, 1119, 505, 696, 858, 752, 640, + 1462, 2286, 2867, 3090, 3001, 2745, 2465, 2238 + }, + { + 2258, 2290, 2417, 2658, 2973, 3251, 3352, 3201, + 2860, 2505, 2321, 2374, 2560, 2670, 2531, 2115, + 1533, 918, 1416, 1778, 2070, 2285, 2419, 2481, + 2484, 2428, 2301, 2070, 1683, 1099, 1019, 1408, + 1581, 1450, 821, 1063, 1519, 1701, 1738, 1680, + 1529, 1233, 605, 763, 1977, 2985, 3901, 3262, + 2954, 2837, 2860, 3007, 3224, 3362, 3307, 3161, + 3080, 3146, 3416, 3186, 2682, 2266, 1948, 1710, + 1551, 1488, 1510, 1531, 1408, 1023, 374, 0, + 375, 619, 716, 717, 629, 380, 412, 1642, + 3121, 4054, 3575, 3547, 3836, 4095, 3115, 2355, + 1985, 1857, 1758, 1612, 1539, 1743, 2310, 3072, + 3653, 3701, 3115, 2145, 1264, 891, 1160, 1875, + 2659, 3193, 3376, 3306, 3120, 2831, 2298, 1343, + 426, 1147, 1410, 1497, 1491, 1418, 1284, 1084, + 807, 416, 63, 669, 1147, 1455, 1615, 1727, + 1916, 2244, 2672, 3091, 3406, 3595, 3708, 3795, + 3846, 3786, 3554, 3185, 2831, 2670, 2758, 2948, + 2936, 2432, 1352, 17, 838, 1124, 1232, 1261, + 1248, 1198, 1078, 750, 403, 2327, 4029, 3456, + 3518, 3701, 2009, 284, 617, 927, 1055, 1114, + 1122, 1056, 839, 191, 1111, 2580, 3472, 3709, + 3495, 3163, 2973, 2990, 3104, 3167, 3111, 2988, + 2897, 2881, 2890, 2819, 2605, 2285, 1977, 1794, + 1770, 1840, 1904, 1887, 1779, 1596, 1331, 949, + 441, 0, 0, 0, 537, 1988, 3802, 2902, + 2585, 2443, 2365, 2314, 2281, 2269, 2286, 2340, + 2430, 2519, 2531, 2443, 2327, 2244, 2207, 2214, + 2255, 2312, 2359, 2388, 2421, 2486, 2589, 2678, + 2654, 2515, 2366, 2282, 2284, 2393, 2689, 3468, + 2415, 1266, 411, 0, 0, 127, 46, 0, + 852, 1745, 2408, 2723, 2735, 2585, 2416, 2301 + }, + { + 2185, 2170, 2249, 2442, 2711, 2942, 2998, 2803, + 2420, 2025, 1803, 1822, 1976, 2058, 1894, 1457, + 857, 229, 718, 1076, 1368, 1587, 1730, 1806, + 1827, 1793, 1693, 1493, 1141, 595, 558, 991, + 1213, 1133, 558, 855, 1367, 1607, 1703, 1705, + 1613, 1376, 806, 1021, 2290, 3352, 4095, 3728, + 3467, 3392, 3454, 3636, 3884, 4049, 4017, 3890, + 3822, 3896, 4095, 3941, 3432, 3007, 2675, 2419, + 2238, 2150, 2142, 2130, 1971, 1548, 856, 289, + 769, 966, 1015, 968, 831, 532, 515, 1697, + 3129, 4016, 3493, 3422, 3671, 3972, 2878, 2086, + 1687, 1532, 1411, 1246, 1156, 1348, 1907, 2662, + 3242, 3290, 2708, 1746, 875, 515, 800, 1533, + 2337, 2892, 3098, 3053, 2893, 2630, 2124, 1196, + 307, 1055, 1344, 1457, 1476, 1428, 1316, 1137, + 880, 506, 170, 789, 1280, 1597, 1765, 1883, + 2074, 2404, 2832, 3249, 3559, 3741, 3847, 3925, + 3966, 3894, 3649, 3267, 2899, 2723, 2796, 2972, + 2944, 2425, 1330, 0, 789, 1062, 1158, 1176, + 1153, 1095, 966, 632, 279, 2200, 3899, 3324, + 3385, 3569, 1879, 157, 493, 808, 941, 1006, + 1021, 961, 751, 110, 1038, 2513, 3413, 3656, + 3448, 3122, 2937, 2959, 3077, 3143, 3090, 2969, + 2878, 2864, 2872, 2800, 2584, 2262, 1951, 1765, + 1737, 1804, 1864, 1844, 1732, 1545, 1277, 892, + 383, 0, 0, 0, 479, 1933, 3751, 2856, + 2546, 2411, 2343, 2302, 2281, 2282, 2313, 2383, + 2489, 2596, 2626, 2558, 2462, 2398, 2382, 2409, + 2471, 2548, 2614, 2662, 2712, 2794, 2912, 3014, + 3002, 2872, 2730, 2651, 2655, 2764, 3057, 3829, + 2767, 1607, 736, 79, 241, 388, 280, 179, + 1024, 1882, 2507, 2783, 2752, 2559, 2345, 2185 + } +}; diff --git a/keyboards/planck/light/config.h b/keyboards/planck/light/config.h index c7bc9cb1a38..c570ec7667c 100644 --- a/keyboards/planck/light/config.h +++ b/keyboards/planck/light/config.h @@ -15,8 +15,8 @@ #define MATRIX_ROW_PINS { B0, E7, F0, F1 } #define MATRIX_COL_PINS { E6, E3, E4, D3, D4, D5, C0, A7, A6, E1, E0, D7 } -#define C6_AUDIO -#define B5_AUDIO +#define AUDIO_PIN C6 +#define AUDIO_PIN_ALT B5 #undef BACKLIGHT_PIN diff --git a/keyboards/planck/rev6/config.h b/keyboards/planck/rev6/config.h index f60b0ec2ef4..055610c699f 100644 --- a/keyboards/planck/rev6/config.h +++ b/keyboards/planck/rev6/config.h @@ -53,8 +53,10 @@ #define MUSIC_MAP #undef AUDIO_VOICES -// Note: following undef isn't really necessary on STM32, C6_AUDIO is AVR related -#undef C6_AUDIO +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ // #define DEBOUNCE 6 diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index c4aa5805dc1..f08be58c68c 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -41,7 +41,7 @@ along with this program. If not, see . #define QMK_SPEAKER C6 #define AUDIO_VOICES -#define C6_AUDIO +#define AUDIO_PIN C6 #define BACKLIGHT_PIN B7 diff --git a/keyboards/preonic/rev3/config.h b/keyboards/preonic/rev3/config.h index 773a9c5fbd5..e8b09e8484f 100644 --- a/keyboards/preonic/rev3/config.h +++ b/keyboards/preonic/rev3/config.h @@ -40,8 +40,10 @@ #define MUSIC_MAP #undef AUDIO_VOICES -// Note: following undef isn't really necessary on STM32, C6_AUDIO is AVR related -#undef C6_AUDIO +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ // #define DEBOUNCE 6 diff --git a/keyboards/scarletbandana/config.h b/keyboards/scarletbandana/config.h index 38a15f676f3..b9c8dd9b0fb 100644 --- a/keyboards/scarletbandana/config.h +++ b/keyboards/scarletbandana/config.h @@ -45,7 +45,7 @@ along with this program. If not, see . #define QMK_SPEAKER C6 #ifdef AUDIO_ENABLE -#define C6_AUDIO +#define AUDIO_PIN C6 #define STARTUP_SONG SONG(PREONIC_SOUND) // Disable music mode to keep the firmware size down #define NO_MUSIC_MODE diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h index dfd5e0aa946..cd78ef34185 100644 --- a/keyboards/silverbullet44/config.h +++ b/keyboards/silverbullet44/config.h @@ -111,7 +111,7 @@ along with this program. If not, see . /* Audio */ #ifdef AUDIO_ENABLE - #define B6_AUDIO + #define AUDIO_PIN B6 #define STARTUP_SONG SONG(STARTUP_SOUND) #define AUDIO_CLICKY #define AUDIO_CLICKY_FREQ_RANDOMNESS 1.0f diff --git a/keyboards/splitkb/zima/config.h b/keyboards/splitkb/zima/config.h index b39ef73082b..fcfa37ff351 100644 --- a/keyboards/splitkb/zima/config.h +++ b/keyboards/splitkb/zima/config.h @@ -49,7 +49,7 @@ along with this program. If not, see . // #define QMK_ESC_INPUT C6 // #define QMK_SPEAKER B6 -#define B6_AUDIO +#define AUDIO_PIN B6 #define AUDIO_CLICKY #define NO_MUSIC_MODE diff --git a/keyboards/subatomic/config.h b/keyboards/subatomic/config.h index db65287fcf3..b19339ad6cb 100644 --- a/keyboards/subatomic/config.h +++ b/keyboards/subatomic/config.h @@ -37,7 +37,7 @@ along with this program. If not, see . #define UNUSED_PINS // #define AUDIO_VOICES -// #define C6_AUDIO +// #define AUDIO_PIN C6 #define BACKLIGHT_PIN B7 diff --git a/keyboards/tetris/config.h b/keyboards/tetris/config.h index a38c3a8d456..1f13f5f1680 100755 --- a/keyboards/tetris/config.h +++ b/keyboards/tetris/config.h @@ -34,7 +34,7 @@ #define NO_ACTION_FUNCTION #ifdef AUDIO_ENABLE - #define B5_AUDIO + #define AUDIO_PIN B5 #define STARTUP_SONG SONG(ONE_UP_SOUND) #define NO_MUSIC_MODE #endif diff --git a/keyboards/vitamins_included/rev1/config.h b/keyboards/vitamins_included/rev1/config.h index ff0c6bcb5be..e8390aa27bf 100644 --- a/keyboards/vitamins_included/rev1/config.h +++ b/keyboards/vitamins_included/rev1/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . /* Audio settings */ #ifdef AUDIO_ENABLE - #define C6_AUDIO // Define this to enable the buzzer + #define AUDIO_PIN C6 // Define this to enable the buzzer #endif /* diff --git a/keyboards/vitamins_included/rev2/config.h b/keyboards/vitamins_included/rev2/config.h index ebbbc15eaed..8bf640f0bb0 100644 --- a/keyboards/vitamins_included/rev2/config.h +++ b/keyboards/vitamins_included/rev2/config.h @@ -61,7 +61,7 @@ along with this program. If not, see . /* Audio settings */ #ifdef AUDIO_ENABLE - #define C6_AUDIO // Define this to enable the buzzer + #define AUDIO_PIN C6 // Define this to enable the buzzer #endif #define QMK_ESC_OUTPUT F1 // usually COL diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h index 6ddad99df95..5914e59fd14 100644 --- a/keyboards/wilba_tech/wt60_xt/config.h +++ b/keyboards/wilba_tech/wt60_xt/config.h @@ -25,7 +25,7 @@ #define MANUFACTURER wilba.tech #define PRODUCT wilba.tech WT60-XT -#define C6_AUDIO +#define AUDIO_PIN C6 #define AUDIO_CLICKY /* key matrix size */ diff --git a/keyboards/yoichiro/lunakey_mini/config.h b/keyboards/yoichiro/lunakey_mini/config.h index 86290cd4e14..abbecef4433 100644 --- a/keyboards/yoichiro/lunakey_mini/config.h +++ b/keyboards/yoichiro/lunakey_mini/config.h @@ -89,7 +89,7 @@ along with this program. If not, see . #endif /* Audio Support */ -#define C6_AUDIO +#define AUDIO_PIN C6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/layouts/community/numpad_5x6/bjohnson/config.h b/layouts/community/numpad_5x6/bjohnson/config.h index 668450d88da..6f1c5397003 100644 --- a/layouts/community/numpad_5x6/bjohnson/config.h +++ b/layouts/community/numpad_5x6/bjohnson/config.h @@ -1,7 +1,5 @@ #pragma once -// #define B6_AUDIO - #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) #define RGB_DI_PIN B7 #define RGBLED_NUM 13 // Number of LEDs diff --git a/layouts/community/numpad_5x6/drashna/config.h b/layouts/community/numpad_5x6/drashna/config.h index 97c1170d787..1f485e1939d 100644 --- a/layouts/community/numpad_5x6/drashna/config.h +++ b/layouts/community/numpad_5x6/drashna/config.h @@ -16,7 +16,6 @@ #pragma once -// #define B6_AUDIO #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) # define RGB_DI_PIN B1 diff --git a/layouts/community/ortho_4x12/bakingpy/config.h b/layouts/community/ortho_4x12/bakingpy/config.h index a153adffb6f..f7d2c24252e 100644 --- a/layouts/community/ortho_4x12/bakingpy/config.h +++ b/layouts/community/ortho_4x12/bakingpy/config.h @@ -16,5 +16,5 @@ #define RGBLIGHT_VAL_STEP 8 #ifdef AUDIO_ENABLE -#define C6_AUDIO +#define AUDIO_PIN C6 #endif diff --git a/layouts/community/ortho_5x12/drashna/config.h b/layouts/community/ortho_5x12/drashna/config.h index 76bd642a32c..619b460a7b0 100644 --- a/layouts/community/ortho_5x12/drashna/config.h +++ b/layouts/community/ortho_5x12/drashna/config.h @@ -33,6 +33,6 @@ # define RGBLIGHT_EFFECT_KNIGHT_OFFSET 3 # define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 14 -# define B7_AUDIO +# define AUDIO_PIN B7 # define NO_MUSIC_MODE #endif diff --git a/layouts/community/ortho_5x14/yet-another-developer/config.h b/layouts/community/ortho_5x14/yet-another-developer/config.h index 7504338fff4..3f8dbd3c5ed 100644 --- a/layouts/community/ortho_5x14/yet-another-developer/config.h +++ b/layouts/community/ortho_5x14/yet-another-developer/config.h @@ -17,6 +17,6 @@ # define RGBLIGHT_EFFECT_KNIGHT_OFFSET 3 # define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 14 -# define B7_AUDIO +# define AUDIO_PIN B7 # define NO_MUSIC_MODE #endif diff --git a/layouts/community/split_3x6_3/drashna/config.h b/layouts/community/split_3x6_3/drashna/config.h index b9b1d073d66..17d7b9ec738 100644 --- a/layouts/community/split_3x6_3/drashna/config.h +++ b/layouts/community/split_3x6_3/drashna/config.h @@ -74,7 +74,7 @@ #endif #ifdef AUDIO_ENABLE -# define B6_AUDIO +# define AUDIO_PIN B6 # define NO_MUSIC_MODE #endif diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c new file mode 100644 index 00000000000..46277dd70bf --- /dev/null +++ b/quantum/audio/audio.c @@ -0,0 +1,539 @@ +/* Copyright 2016-2020 Jack Humbert + * Copyright 2020 JohSchneider + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "audio.h" +#include "eeconfig.h" +#include "timer.h" +#include "wait.h" + +/* audio system: + * + * audio.[ch] takes care of all overall state, tracking the actively playing + * notes/tones; the notes a SONG consists of; + * ... + * = everything audio-related that is platform agnostic + * + * driver_[avr|chibios]_[dac|pwm] take care of the lower hardware dependent parts, + * specific to each platform and the used subsystem/driver to drive + * the output pins/channels with the calculated frequencies for each + * active tone + * as part of this, the driver has to trigger regular state updates by + * calling 'audio_update_state' through some sort of timer - be it a + * dedicated one or piggybacking on for example the timer used to + * generate a pwm signal/clock. + * + * + * A Note on terminology: + * tone, pitch and frequency are used somewhat interchangeably, in a strict Wikipedia-sense: + * "(Musical) tone, a sound characterized by its duration, pitch (=frequency), + * intensity (=volume), and timbre" + * - intensity/volume is currently not handled at all, although the 'dac_additive' driver could do so + * - timbre is handled globally (TODO: only used with the pwm drivers at the moment) + * + * in musical_note.h a 'note' is the combination of a pitch and a duration + * these are used to create SONG arrays; during playback their frequencies + * are handled as single successive tones, while the durations are + * kept track of in 'audio_update_state' + * + * 'voice' as it is used here, equates to a sort of instrument with its own + * characteristics sound and effects + * the audio system as-is deals only with (possibly multiple) tones of one + * instrument/voice at a time (think: chords). since the number of tones that + * can be reproduced depends on the hardware/driver in use: pwm can only + * reproduce one tone per output/speaker; DACs can reproduce/mix multiple + * when doing additive synthesis. + * + * 'duration' can either be in the beats-per-minute related unit found in + * musical_notes.h, OR in ms; keyboards create SONGs with the former, while + * the internal state of the audio system does its calculations with the later - ms + */ + +#ifndef AUDIO_TONE_STACKSIZE +# define AUDIO_TONE_STACKSIZE 8 +#endif +uint8_t active_tones = 0; // number of tones pushed onto the stack by audio_play_tone - might be more than the hardware is able to reproduce at any single time +musical_tone_t tones[AUDIO_TONE_STACKSIZE]; // stack of currently active tones + +bool playing_melody = false; // playing a SONG? +bool playing_note = false; // or (possibly multiple simultaneous) tones +bool state_changed = false; // global flag, which is set if anything changes with the active_tones + +// melody/SONG related state variables +float (*notes_pointer)[][2]; // SONG, an array of MUSICAL_NOTEs +uint16_t notes_count; // length of the notes_pointer array +bool notes_repeat; // PLAY_SONG or PLAY_LOOP? +uint16_t melody_current_note_duration = 0; // duration of the currently playing note from the active melody, in ms +uint8_t note_tempo = TEMPO_DEFAULT; // beats-per-minute +uint16_t current_note = 0; // index into the array at notes_pointer +bool note_resting = false; // if a short pause was introduced between two notes with the same frequency while playing a melody +uint16_t last_timestamp = 0; + +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING +# ifndef AUDIO_MAX_SIMULTANEOUS_TONES +# define AUDIO_MAX_SIMULTANEOUS_TONES 3 +# endif +uint16_t tone_multiplexing_rate = AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT; +uint8_t tone_multiplexing_index_shift = 0; // offset used on active-tone array access +#endif + +// provided and used by voices.c +extern uint8_t note_timbre; +extern bool glissando; +extern bool vibrato; +extern uint16_t voices_timer; + +#ifndef STARTUP_SONG +# define STARTUP_SONG SONG(STARTUP_SOUND) +#endif +#ifndef AUDIO_ON_SONG +# define AUDIO_ON_SONG SONG(AUDIO_ON_SOUND) +#endif +#ifndef AUDIO_OFF_SONG +# define AUDIO_OFF_SONG SONG(AUDIO_OFF_SOUND) +#endif +float startup_song[][2] = STARTUP_SONG; +float audio_on_song[][2] = AUDIO_ON_SONG; +float audio_off_song[][2] = AUDIO_OFF_SONG; + +static bool audio_initialized = false; +static bool audio_driver_stopped = true; +audio_config_t audio_config; + +void audio_init() { + if (audio_initialized) { + return; + } + + // Check EEPROM +#ifdef EEPROM_ENABLE + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + audio_config.raw = eeconfig_read_audio(); +#else // EEPROM settings + audio_config.enable = true; +# ifdef AUDIO_CLICKY_ON + audio_config.clicky_enable = true; +# endif +#endif // EEPROM settings + + for (uint8_t i = 0; i < AUDIO_TONE_STACKSIZE; i++) { + tones[i] = (musical_tone_t){.time_started = 0, .pitch = -1.0f, .duration = 0}; + } + + if (!audio_initialized) { + audio_driver_initialize(); + audio_initialized = true; + } + stop_all_notes(); +} + +void audio_startup(void) { + if (audio_config.enable) { + PLAY_SONG(startup_song); + } + + last_timestamp = timer_read(); +} + +void audio_toggle(void) { + if (audio_config.enable) { + stop_all_notes(); + } + audio_config.enable ^= 1; + eeconfig_update_audio(audio_config.raw); + if (audio_config.enable) { + audio_on_user(); + } +} + +void audio_on(void) { + audio_config.enable = 1; + eeconfig_update_audio(audio_config.raw); + audio_on_user(); + PLAY_SONG(audio_on_song); +} + +void audio_off(void) { + PLAY_SONG(audio_off_song); + wait_ms(100); + audio_stop_all(); + audio_config.enable = 0; + eeconfig_update_audio(audio_config.raw); +} + +bool audio_is_on(void) { return (audio_config.enable != 0); } + +void audio_stop_all() { + if (audio_driver_stopped) { + return; + } + + active_tones = 0; + + audio_driver_stop(); + + playing_melody = false; + playing_note = false; + + melody_current_note_duration = 0; + + for (uint8_t i = 0; i < AUDIO_TONE_STACKSIZE; i++) { + tones[i] = (musical_tone_t){.time_started = 0, .pitch = -1.0f, .duration = 0}; + } + + audio_driver_stopped = true; +} + +void audio_stop_tone(float pitch) { + if (pitch < 0.0f) { + pitch = -1 * pitch; + } + + if (playing_note) { + if (!audio_initialized) { + audio_init(); + } + bool found = false; + for (int i = AUDIO_TONE_STACKSIZE - 1; i >= 0; i--) { + found = (tones[i].pitch == pitch); + if (found) { + tones[i] = (musical_tone_t){.time_started = 0, .pitch = -1.0f, .duration = 0}; + for (int j = i; (j < AUDIO_TONE_STACKSIZE - 1); j++) { + tones[j] = tones[j + 1]; + tones[j + 1] = (musical_tone_t){.time_started = 0, .pitch = -1.0f, .duration = 0}; + } + break; + } + } + if (!found) { + return; + } + + state_changed = true; + active_tones--; + if (active_tones < 0) active_tones = 0; +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING + if (tone_multiplexing_index_shift >= active_tones) { + tone_multiplexing_index_shift = 0; + } +#endif + if (active_tones == 0) { + audio_driver_stop(); + audio_driver_stopped = true; + playing_note = false; + } + } +} + +void audio_play_note(float pitch, uint16_t duration) { + if (!audio_config.enable) { + return; + } + + if (!audio_initialized) { + audio_init(); + } + + if (pitch < 0.0f) { + pitch = -1 * pitch; + } + + // round-robin: shifting out old tones, keeping only unique ones + // if the new frequency is already amongst the active tones, shift it to the top of the stack + bool found = false; + for (int i = active_tones - 1; i >= 0; i--) { + found = (tones[i].pitch == pitch); + if (found) { + for (int j = i; (j < active_tones - 1); j++) { + tones[j] = tones[j + 1]; + tones[j + 1] = (musical_tone_t){.time_started = timer_read(), .pitch = pitch, .duration = duration}; + } + return; // since this frequency played already, the hardware was already started + } + } + + // frequency/tone is actually new, so we put it on the top of the stack + active_tones++; + if (active_tones > AUDIO_TONE_STACKSIZE) { + active_tones = AUDIO_TONE_STACKSIZE; + // shift out the oldest tone to make room + for (int i = 0; i < active_tones - 1; i++) { + tones[i] = tones[i + 1]; + } + } + state_changed = true; + playing_note = true; + tones[active_tones - 1] = (musical_tone_t){.time_started = timer_read(), .pitch = pitch, .duration = duration}; + + // TODO: needs to be handled per note/tone -> use its timestamp instead? + voices_timer = timer_read(); // reset to zero, for the effects added by voices.c + + if (audio_driver_stopped) { + audio_driver_start(); + audio_driver_stopped = false; + } +} + +void audio_play_tone(float pitch) { audio_play_note(pitch, 0xffff); } + +void audio_play_melody(float (*np)[][2], uint16_t n_count, bool n_repeat) { + if (!audio_config.enable) { + audio_stop_all(); + return; + } + + if (!audio_initialized) { + audio_init(); + } + + // Cancel note if a note is playing + if (playing_note) audio_stop_all(); + + playing_melody = true; + note_resting = false; + + notes_pointer = np; + notes_count = n_count; + notes_repeat = n_repeat; + + current_note = 0; // note in the melody-array/list at note_pointer + + // start first note manually, which also starts the audio_driver + // all following/remaining notes are played by 'audio_update_state' + audio_play_note((*notes_pointer)[current_note][0], audio_duration_to_ms((*notes_pointer)[current_note][1])); + last_timestamp = timer_read(); + melody_current_note_duration = audio_duration_to_ms((*notes_pointer)[current_note][1]); +} + +float click[2][2]; +void audio_play_click(uint16_t delay, float pitch, uint16_t duration) { + uint16_t duration_tone = audio_ms_to_duration(duration); + uint16_t duration_delay = audio_ms_to_duration(delay); + + if (delay <= 0.0f) { + click[0][0] = pitch; + click[0][1] = duration_tone; + click[1][0] = 0.0f; + click[1][1] = 0.0f; + audio_play_melody(&click, 1, false); + } else { + // first note is a rest/pause + click[0][0] = 0.0f; + click[0][1] = duration_delay; + // second note is the actual click + click[1][0] = pitch; + click[1][1] = duration_tone; + audio_play_melody(&click, 2, false); + } +} + +bool audio_is_playing_note(void) { return playing_note; } + +bool audio_is_playing_melody(void) { return playing_melody; } + +uint8_t audio_get_number_of_active_tones(void) { return active_tones; } + +float audio_get_frequency(uint8_t tone_index) { + if (tone_index >= active_tones) { + return 0.0f; + } + return tones[active_tones - tone_index - 1].pitch; +} + +float audio_get_processed_frequency(uint8_t tone_index) { + if (tone_index >= active_tones) { + return 0.0f; + } + + int8_t index = active_tones - tone_index - 1; + // new tones are stacked on top (= appended at the end), so the most recent/current is MAX-1 + +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING + index = index - tone_multiplexing_index_shift; + if (index < 0) // wrap around + index += active_tones; +#endif + + if (tones[index].pitch <= 0.0f) { + return 0.0f; + } + + return voice_envelope(tones[index].pitch); +} + +bool audio_update_state(void) { + if (!playing_note && !playing_melody) { + return false; + } + + bool goto_next_note = false; + uint16_t current_time = timer_read(); + + if (playing_melody) { + goto_next_note = timer_elapsed(last_timestamp) >= melody_current_note_duration; + if (goto_next_note) { + uint16_t delta = timer_elapsed(last_timestamp) - melody_current_note_duration; + last_timestamp = current_time; + uint16_t previous_note = current_note; + current_note++; + voices_timer = timer_read(); // reset to zero, for the effects added by voices.c + + if (current_note >= notes_count) { + if (notes_repeat) { + current_note = 0; + } else { + audio_stop_all(); + return false; + } + } + + if (!note_resting && (*notes_pointer)[previous_note][0] == (*notes_pointer)[current_note][0]) { + note_resting = true; + + // special handling for successive notes of the same frequency: + // insert a short pause to separate them audibly + audio_play_note(0.0f, audio_duration_to_ms(2)); + current_note = previous_note; + melody_current_note_duration = audio_duration_to_ms(2); + + } else { + note_resting = false; + + // TODO: handle glissando here (or remember previous and current tone) + /* there would need to be a freq(here we are) -> freq(next note) + * and do slide/glissando in between problem here is to know which + * frequency on the stack relates to what other? e.g. a melody starts + * tones in a sequence, and stops expiring one, so the most recently + * stopped is the starting point for a glissando to the most recently started? + * how to detect and preserve this relation? + * and what about user input, chords, ...? + */ + + // '- delta': Skip forward in the next note's length if we've over shot + // the last, so the overall length of the song is the same + uint16_t duration = audio_duration_to_ms((*notes_pointer)[current_note][1]); + + // Skip forward past any completely missed notes + while (delta > duration && current_note < notes_count - 1) { + delta -= duration; + current_note++; + duration = audio_duration_to_ms((*notes_pointer)[current_note][1]); + } + + if (delta < duration) { + duration -= delta; + } else { + // Only way to get here is if it is the last note and + // we have completely missed it. Play it for 1ms... + duration = 1; + } + + audio_play_note((*notes_pointer)[current_note][0], duration); + melody_current_note_duration = duration; + } + } + } + + if (playing_note) { +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING + tone_multiplexing_index_shift = (int)(current_time / tone_multiplexing_rate) % MIN(AUDIO_MAX_SIMULTANEOUS_TONES, active_tones); + goto_next_note = true; +#endif + if (vibrato || glissando) { + // force update on each cycle, since vibrato shifts the frequency slightly + goto_next_note = true; + } + + // housekeeping: stop notes that have no playtime left + for (int i = 0; i < active_tones; i++) { + if ((tones[i].duration != 0xffff) // indefinitely playing notes, started by 'audio_play_tone' + && (tones[i].duration != 0) // 'uninitialized' + ) { + if (timer_elapsed(tones[i].time_started) >= tones[i].duration) { + audio_stop_tone(tones[i].pitch); // also sets 'state_changed=true' + } + } + } + } + + // state-changes have a higher priority, always triggering the hardware to update + if (state_changed) { + state_changed = false; + return true; + } + + return goto_next_note; +} + +// Tone-multiplexing functions +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING +void audio_set_tone_multiplexing_rate(uint16_t rate) { tone_multiplexing_rate = rate; } +void audio_enable_tone_multiplexing(void) { tone_multiplexing_rate = AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT; } +void audio_disable_tone_multiplexing(void) { tone_multiplexing_rate = 0; } +void audio_increase_tone_multiplexing_rate(uint16_t change) { + if ((0xffff - change) > tone_multiplexing_rate) { + tone_multiplexing_rate += change; + } +} +void audio_decrease_tone_multiplexing_rate(uint16_t change) { + if (change <= tone_multiplexing_rate) { + tone_multiplexing_rate -= change; + } +} +#endif + +// Tempo functions + +void audio_set_tempo(uint8_t tempo) { + if (tempo < 10) note_tempo = 10; + // else if (tempo > 250) + // note_tempo = 250; + else + note_tempo = tempo; +} + +void audio_increase_tempo(uint8_t tempo_change) { + if (tempo_change > 255 - note_tempo) + note_tempo = 255; + else + note_tempo += tempo_change; +} + +void audio_decrease_tempo(uint8_t tempo_change) { + if (tempo_change >= note_tempo - 10) + note_tempo = 10; + else + note_tempo -= tempo_change; +} + +// TODO in the int-math version are some bugs; songs sometimes abruptly end - maybe an issue with the timer/system-tick wrapping around? +uint16_t audio_duration_to_ms(uint16_t duration_bpm) { +#if defined(__AVR__) + // doing int-math saves us some bytes in the overall firmware size, but the intermediate result is less accurate before being cast to/returned as uint + return ((uint32_t)duration_bpm * 60 * 1000) / (64 * note_tempo); + // NOTE: beware of uint16_t overflows when note_tempo is low and/or the duration is long +#else + return ((float)duration_bpm * 60) / (64 * note_tempo) * 1000; +#endif +} +uint16_t audio_ms_to_duration(uint16_t duration_ms) { +#if defined(__AVR__) + return ((uint32_t)duration_ms * 64 * note_tempo) / 60 / 1000; +#else + return ((float)duration_ms * 64 * note_tempo) / 60 / 1000; +#endif +} diff --git a/quantum/audio/audio.h b/quantum/audio/audio.h index dccf03d5f65..56b9158a1a0 100644 --- a/quantum/audio/audio.h +++ b/quantum/audio/audio.h @@ -1,4 +1,5 @@ -/* Copyright 2016 Jack Humbert +/* Copyright 2016-2020 Jack Humbert + * Copyright 2020 JohSchneider * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,28 +14,30 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #pragma once #include #include -#if defined(__AVR__) -# include -#endif -#include "wait.h" #include "musical_notes.h" #include "song_list.h" #include "voices.h" #include "quantum.h" #include -// Largely untested PWM audio mode (doesn't sound as good) -// #define PWM_AUDIO +#if defined(__AVR__) +# include +# if defined(AUDIO_DRIVER_PWM) +# include "driver_avr_pwm.h" +# endif +#endif -// #define VIBRATO_ENABLE - -// Enable vibrato strength/amplitude - slows down ISR too much -// #define VIBRATO_STRENGTH_ENABLE +#if defined(PROTOCOL_CHIBIOS) +# if defined(AUDIO_DRIVER_PWM) +# include "driver_chibios_pwm.h" +# elif defined(AUDIO_DRIVER_DAC) +# include "driver_chibios_dac.h" +# endif +#endif typedef union { uint8_t raw; @@ -45,62 +48,238 @@ typedef union { }; } audio_config_t; -bool is_audio_on(void); -void audio_toggle(void); -void audio_on(void); -void audio_off(void); - -// Vibrato rate functions - -#ifdef VIBRATO_ENABLE - -void set_vibrato_rate(float rate); -void increase_vibrato_rate(float change); -void decrease_vibrato_rate(float change); - -# ifdef VIBRATO_STRENGTH_ENABLE - -void set_vibrato_strength(float strength); -void increase_vibrato_strength(float change); -void decrease_vibrato_strength(float change); - -# endif - +// AVR/LUFA has a MIN, arm/chibios does not +#ifndef MIN +# define MIN(a, b) (((a) < (b)) ? (a) : (b)) #endif -// Polyphony functions +/* + * a 'musical note' is represented by pitch and duration; a 'musical tone' adds intensity and timbre + * https://en.wikipedia.org/wiki/Musical_tone + * "A musical tone is characterized by its duration, pitch, intensity (or loudness), and timbre (or quality)" + */ +typedef struct { + uint16_t time_started; // timestamp the tone/note was started, system time runs with 1ms resolution -> 16bit timer overflows every ~64 seconds, long enough under normal circumstances; but might be too soon for long-duration notes when the note_tempo is set to a very low value + float pitch; // aka frequency, in Hz + uint16_t duration; // in ms, converted from the musical_notes.h unit which has 64parts to a beat, factoring in the current tempo in beats-per-minute + // float intensity; // aka volume [0,1] TODO: not used at the moment; pwm drivers can't handle it + // uint8_t timbre; // range: [0,100] TODO: this currently kept track of globally, should we do this per tone instead? +} musical_tone_t; -void set_polyphony_rate(float rate); -void enable_polyphony(void); -void disable_polyphony(void); -void increase_polyphony_rate(float change); -void decrease_polyphony_rate(float change); - -void set_timbre(float timbre); -void set_tempo(uint8_t tempo); - -void increase_tempo(uint8_t tempo_change); -void decrease_tempo(uint8_t tempo_change); +// public interface +/** + * @brief one-time initialization called by quantum/quantum.c + * @details usually done lazy, when some tones are to be played + * + * @post audio system (and hardware) initialized and ready to play tones + */ void audio_init(void); void audio_startup(void); -#ifdef PWM_AUDIO -void play_sample(uint8_t* s, uint16_t l, bool r); -#endif -void play_note(float freq, int vol); -void stop_note(float freq); -void stop_all_notes(void); -void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat); +/** + * @brief en-/disable audio output, save this choice to the eeprom + */ +void audio_toggle(void); +/** + * @brief enable audio output, save this choice to the eeprom + */ +void audio_on(void); +/** + * @brief disable audio output, save this choice to the eeprom + */ +void audio_off(void); +/** + * @brief query the if audio output is enabled + */ +bool audio_is_on(void); -#define SCALE \ - (int8_t[]) { 0 + (12 * 0), 2 + (12 * 0), 4 + (12 * 0), 5 + (12 * 0), 7 + (12 * 0), 9 + (12 * 0), 11 + (12 * 0), 0 + (12 * 1), 2 + (12 * 1), 4 + (12 * 1), 5 + (12 * 1), 7 + (12 * 1), 9 + (12 * 1), 11 + (12 * 1), 0 + (12 * 2), 2 + (12 * 2), 4 + (12 * 2), 5 + (12 * 2), 7 + (12 * 2), 9 + (12 * 2), 11 + (12 * 2), 0 + (12 * 3), 2 + (12 * 3), 4 + (12 * 3), 5 + (12 * 3), 7 + (12 * 3), 9 + (12 * 3), 11 + (12 * 3), 0 + (12 * 4), 2 + (12 * 4), 4 + (12 * 4), 5 + (12 * 4), 7 + (12 * 4), 9 + (12 * 4), 11 + (12 * 4), } +/** + * @brief start playback of a tone with the given frequency and duration + * + * @details starts the playback of a given note, which is automatically stopped + * at the the end of its duration = fire&forget + * + * @param[in] pitch frequency of the tone be played + * @param[in] duration in milliseconds, use 'audio_duration_to_ms' to convert + * from the musical_notes.h unit to ms + */ +void audio_play_note(float pitch, uint16_t duration); +// TODO: audio_play_note(float pitch, uint16_t duration, float intensity, float timbre); +// audio_play_note_with_instrument ifdef AUDIO_ENABLE_VOICES -// These macros are used to allow play_notes to play an array of indeterminate +/** + * @brief start playback of a tone with the given frequency + * + * @details the 'frequency' is put on-top the internal stack of active tones, + * as a new tone with indefinite duration. this tone is played by + * the hardware until a call to 'audio_stop_tone'. + * should a tone with that frequency already be active, its entry + * is put on the top of said internal stack - so no duplicate + * entries are kept. + * 'hardware_start' is called upon the first note. + * + * @param[in] pitch frequency of the tone be played + */ +void audio_play_tone(float pitch); + +/** + * @brief stop a given tone/frequency + * + * @details removes a tone matching the given frequency from the internal + * playback stack + * the hardware is stopped in case this was the last/only frequency + * being played. + * + * @param[in] pitch tone/frequency to be stopped + */ +void audio_stop_tone(float pitch); + +/** + * @brief play a melody + * + * @details starts playback of a melody passed in from a SONG definition - an + * array of {pitch, duration} float-tuples + * + * @param[in] np note-pointer to the SONG array + * @param[in] n_count number of MUSICAL_NOTES of the SONG + * @param[in] n_repeat false for onetime, true for looped playback + */ +void audio_play_melody(float (*np)[][2], uint16_t n_count, bool n_repeat); + +/** + * @brief play a short tone of a specific frequency to emulate a 'click' + * + * @details constructs a two-note melody (one pause plus a note) and plays it through + * audio_play_melody. very short durations might not quite work due to + * hardware limitations (DAC: added pulses from zero-crossing feature;...) + * + * @param[in] delay in milliseconds, length for the pause before the pulses, can be zero + * @param[in] pitch + * @param[in] duration in milliseconds, length of the 'click' + */ +void audio_play_click(uint16_t delay, float pitch, uint16_t duration); + +/** + * @brief stops all playback + * + * @details stops playback of both a melody as well as single tones, resetting + * the internal state + */ +void audio_stop_all(void); + +/** + * @brief query if one/multiple tones are playing + */ +bool audio_is_playing_note(void); + +/** + * @brief query if a melody/SONG is playing + */ +bool audio_is_playing_melody(void); + +// These macros are used to allow audio_play_melody to play an array of indeterminate // length. This works around the limitation of C's sizeof operation on pointers. // The global float array for the song must be used here. #define NOTE_ARRAY_SIZE(x) ((int16_t)(sizeof(x) / (sizeof(x[0])))) -#define PLAY_SONG(note_array) play_notes(¬e_array, NOTE_ARRAY_SIZE((note_array)), false) -#define PLAY_LOOP(note_array) play_notes(¬e_array, NOTE_ARRAY_SIZE((note_array)), true) -bool is_playing_notes(void); +/** + * @brief convenience macro, to play a melody/SONG once + */ +#define PLAY_SONG(note_array) audio_play_melody(¬e_array, NOTE_ARRAY_SIZE((note_array)), false) +// TODO: a 'song' is a melody plus singing/vocals -> PLAY_MELODY +/** + * @brief convenience macro, to play a melody/SONG in a loop, until stopped by 'audio_stop_all' + */ +#define PLAY_LOOP(note_array) audio_play_melody(¬e_array, NOTE_ARRAY_SIZE((note_array)), true) + +// Tone-Multiplexing functions +// this feature only makes sense for hardware setups which can't do proper +// audio-wave synthesis = have no DAC and need to use PWM for tone generation +#ifdef AUDIO_ENABLE_TONE_MULTIPLEXING +# ifndef AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT +# define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 0 +// 0=off, good starting value is 4; the lower the value the higher the cpu-load +# endif +void audio_set_tone_multiplexing_rate(uint16_t rate); +void audio_enable_tone_multiplexing(void); +void audio_disable_tone_multiplexing(void); +void audio_increase_tone_multiplexing_rate(uint16_t change); +void audio_decrease_tone_multiplexing_rate(uint16_t change); +#endif + +// Tempo functions + +void audio_set_tempo(uint8_t tempo); +void audio_increase_tempo(uint8_t tempo_change); +void audio_decrease_tempo(uint8_t tempo_change); + +// conversion macros, from 64parts-to-a-beat to milliseconds and back +uint16_t audio_duration_to_ms(uint16_t duration_bpm); +uint16_t audio_ms_to_duration(uint16_t duration_ms); + +void audio_startup(void); + +// hardware interface + +// implementation in the driver_avr/arm_* respective parts +void audio_driver_initialize(void); +void audio_driver_start(void); +void audio_driver_stop(void); + +/** + * @brief get the number of currently active tones + * @return number, 0=none active + */ +uint8_t audio_get_number_of_active_tones(void); + +/** + * @brief access to the raw/unprocessed frequency for a specific tone + * @details each active tone has a frequency associated with it, which + * the internal state keeps track of, and is usually influenced + * by various effects + * @param[in] tone_index, ranging from 0 to number_of_active_tones-1, with the + * first being the most recent and each increment yielding the next + * older one + * @return a positive frequency, in Hz; or zero if the tone is a pause + */ +float audio_get_frequency(uint8_t tone_index); + +/** + * @brief calculate and return the frequency for the requested tone + * @details effects like glissando, vibrato, ... are post-processed onto the + * each active tones 'base'-frequency; this function returns the + * post-processed result. + * @param[in] tone_index, ranging from 0 to number_of_active_tones-1, with the + * first being the most recent and each increment yielding the next + * older one + * @return a positive frequency, in Hz; or zero if the tone is a pause + */ +float audio_get_processed_frequency(uint8_t tone_index); + +/** + * @brief update audio internal state: currently playing and active tones,... + * @details This function is intended to be called by the audio-hardware + * specific implementation on a somewhat regular basis while a SONG + * or notes (pitch+duration) are playing to 'advance' the internal + * state (current playing notes, position in the melody, ...) + * + * @return true if something changed in the currently active tones, which the + * hardware might need to react to + */ +bool audio_update_state(void); + +// legacy and back-warts compatibility stuff + +#define is_audio_on() audio_is_on() +#define is_playing_notes() audio_is_playing_melody() +#define is_playing_note() audio_is_playing_note() +#define stop_all_notes() audio_stop_all() +#define stop_note(f) audio_stop_tone(f) +#define play_note(f, v) audio_play_tone(f) + +#define set_timbre(t) voice_set_timbre(t) +#define set_tempo(t) audio_set_tempo(t) +#define increase_tempo(t) audio_increase_tempo(t) +#define decrease_tempo(t) audio_decrease_tempo(t) +// vibrato functions are not used in any keyboards diff --git a/quantum/audio/audio_avr.c b/quantum/audio/audio_avr.c deleted file mode 100644 index 1bac43bb437..00000000000 --- a/quantum/audio/audio_avr.c +++ /dev/null @@ -1,812 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -//#include -#if defined(__AVR__) -# include -# include -# include -#endif -#include "print.h" -#include "audio.h" -#include "keymap.h" -#include "wait.h" - -#include "eeconfig.h" - -#define CPU_PRESCALER 8 - -// ----------------------------------------------------------------------------- -// Timer Abstractions -// ----------------------------------------------------------------------------- - -// Currently we support timers 1 and 3 used at the sime time, channels A-C, -// pins PB5, PB6, PB7, PC4, PC5, and PC6 -#if defined(C6_AUDIO) -# define CPIN_AUDIO -# define CPIN_SET_DIRECTION DDRC |= _BV(PORTC6); -# define INIT_AUDIO_COUNTER_3 TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30); -# define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3A) -# define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3A) -# define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3A1); -# define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0)); -# define TIMER_3_PERIOD ICR3 -# define TIMER_3_DUTY_CYCLE OCR3A -# define TIMER3_AUDIO_vect TIMER3_COMPA_vect -#endif -#if defined(C5_AUDIO) -# define CPIN_AUDIO -# define CPIN_SET_DIRECTION DDRC |= _BV(PORTC5); -# define INIT_AUDIO_COUNTER_3 TCCR3A = (0 << COM3B1) | (0 << COM3B0) | (1 << WGM31) | (0 << WGM30); -# define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3B) -# define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3B) -# define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3B1); -# define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3B1) | _BV(COM3B0)); -# define TIMER_3_PERIOD ICR3 -# define TIMER_3_DUTY_CYCLE OCR3B -# define TIMER3_AUDIO_vect TIMER3_COMPB_vect -#endif -#if defined(C4_AUDIO) -# define CPIN_AUDIO -# define CPIN_SET_DIRECTION DDRC |= _BV(PORTC4); -# define INIT_AUDIO_COUNTER_3 TCCR3A = (0 << COM3C1) | (0 << COM3C0) | (1 << WGM31) | (0 << WGM30); -# define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3C) -# define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3C) -# define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3C1); -# define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3C1) | _BV(COM3C0)); -# define TIMER_3_PERIOD ICR3 -# define TIMER_3_DUTY_CYCLE OCR3C -# define TIMER3_AUDIO_vect TIMER3_COMPC_vect -#endif - -#if defined(B5_AUDIO) -# define BPIN_AUDIO -# define BPIN_SET_DIRECTION DDRB |= _BV(PORTB5); -# define INIT_AUDIO_COUNTER_1 TCCR1A = (0 << COM1A1) | (0 << COM1A0) | (1 << WGM11) | (0 << WGM10); -# define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1A) -# define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1A) -# define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1A1); -# define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1A1) | _BV(COM1A0)); -# define TIMER_1_PERIOD ICR1 -# define TIMER_1_DUTY_CYCLE OCR1A -# define TIMER1_AUDIO_vect TIMER1_COMPA_vect -#endif -#if defined(B6_AUDIO) -# define BPIN_AUDIO -# define BPIN_SET_DIRECTION DDRB |= _BV(PORTB6); -# define INIT_AUDIO_COUNTER_1 TCCR1A = (0 << COM1B1) | (0 << COM1B0) | (1 << WGM11) | (0 << WGM10); -# define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1B) -# define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1B) -# define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1B1); -# define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1B1) | _BV(COM1B0)); -# define TIMER_1_PERIOD ICR1 -# define TIMER_1_DUTY_CYCLE OCR1B -# define TIMER1_AUDIO_vect TIMER1_COMPB_vect -#endif -#if defined(B7_AUDIO) -# define BPIN_AUDIO -# define BPIN_SET_DIRECTION DDRB |= _BV(PORTB7); -# define INIT_AUDIO_COUNTER_1 TCCR1A = (0 << COM1C1) | (0 << COM1C0) | (1 << WGM11) | (0 << WGM10); -# define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1C) -# define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1C) -# define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1C1); -# define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1C1) | _BV(COM1C0)); -# define TIMER_1_PERIOD ICR1 -# define TIMER_1_DUTY_CYCLE OCR1C -# define TIMER1_AUDIO_vect TIMER1_COMPC_vect -#endif - -#if !defined(BPIN_AUDIO) && !defined(CPIN_AUDIO) -# error "Audio feature enabled, but no suitable pin selected - see docs/feature_audio.md under the AVR settings for available options." -#endif - -// ----------------------------------------------------------------------------- - -int voices = 0; -int voice_place = 0; -float frequency = 0; -float frequency_alt = 0; -int volume = 0; -long position = 0; - -float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -bool sliding = false; - -float place = 0; - -uint8_t* sample; -uint16_t sample_length = 0; - -bool playing_notes = false; -bool playing_note = false; -float note_frequency = 0; -float note_length = 0; -uint8_t note_tempo = TEMPO_DEFAULT; -float note_timbre = TIMBRE_DEFAULT; -uint16_t note_position = 0; -float (*notes_pointer)[][2]; -uint16_t notes_count; -bool notes_repeat; -bool note_resting = false; - -uint16_t current_note = 0; -uint8_t rest_counter = 0; - -#ifdef VIBRATO_ENABLE -float vibrato_counter = 0; -float vibrato_strength = .5; -float vibrato_rate = 0.125; -#endif - -float polyphony_rate = 0; - -static bool audio_initialized = false; - -audio_config_t audio_config; - -uint16_t envelope_index = 0; -bool glissando = true; - -#ifndef STARTUP_SONG -# define STARTUP_SONG SONG(STARTUP_SOUND) -#endif -#ifndef AUDIO_ON_SONG -# define AUDIO_ON_SONG SONG(AUDIO_ON_SOUND) -#endif -#ifndef AUDIO_OFF_SONG -# define AUDIO_OFF_SONG SONG(AUDIO_OFF_SOUND) -#endif -float startup_song[][2] = STARTUP_SONG; -float audio_on_song[][2] = AUDIO_ON_SONG; -float audio_off_song[][2] = AUDIO_OFF_SONG; - -void audio_init() { - // Check EEPROM - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - audio_config.raw = eeconfig_read_audio(); - - if (!audio_initialized) { -// Set audio ports as output -#ifdef CPIN_AUDIO - CPIN_SET_DIRECTION - DISABLE_AUDIO_COUNTER_3_ISR; -#endif -#ifdef BPIN_AUDIO - BPIN_SET_DIRECTION - DISABLE_AUDIO_COUNTER_1_ISR; -#endif - -// TCCR3A / TCCR3B: Timer/Counter #3 Control Registers TCCR3A/TCCR3B, TCCR1A/TCCR1B -// Compare Output Mode (COM3An and COM1An) = 0b00 = Normal port operation -// OC3A -- PC6 -// OC3B -- PC5 -// OC3C -- PC4 -// OC1A -- PB5 -// OC1B -- PB6 -// OC1C -- PB7 - -// Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14. Period = ICR3, Duty Cycle OCR3A) -// OCR3A - PC6 -// OCR3B - PC5 -// OCR3C - PC4 -// OCR1A - PB5 -// OCR1B - PB6 -// OCR1C - PB7 - -// Clock Select (CS3n) = 0b010 = Clock / 8 -#ifdef CPIN_AUDIO - INIT_AUDIO_COUNTER_3 - TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30); - TIMER_3_PERIOD = (uint16_t)(((float)F_CPU) / (440 * CPU_PRESCALER)); - TIMER_3_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (440 * CPU_PRESCALER)) * note_timbre); -#endif -#ifdef BPIN_AUDIO - INIT_AUDIO_COUNTER_1 - TCCR1B = (1 << WGM13) | (1 << WGM12) | (0 << CS12) | (1 << CS11) | (0 << CS10); - TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (440 * CPU_PRESCALER)); - TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (440 * CPU_PRESCALER)) * note_timbre); -#endif - - audio_initialized = true; - } -} - -void audio_startup() { - if (audio_config.enable) { - PLAY_SONG(startup_song); - } -} - -void stop_all_notes() { - dprintf("audio stop all notes"); - - if (!audio_initialized) { - audio_init(); - } - voices = 0; - -#ifdef CPIN_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - -#ifdef BPIN_AUDIO - DISABLE_AUDIO_COUNTER_1_ISR; - DISABLE_AUDIO_COUNTER_1_OUTPUT; -#endif - - playing_notes = false; - playing_note = false; - frequency = 0; - frequency_alt = 0; - volume = 0; - - for (uint8_t i = 0; i < 8; i++) { - frequencies[i] = 0; - volumes[i] = 0; - } -} - -void stop_note(float freq) { - dprintf("audio stop note freq=%d", (int)freq); - - if (playing_note) { - if (!audio_initialized) { - audio_init(); - } - for (int i = 7; i >= 0; i--) { - if (frequencies[i] == freq) { - frequencies[i] = 0; - volumes[i] = 0; - for (int j = i; (j < 7); j++) { - frequencies[j] = frequencies[j + 1]; - frequencies[j + 1] = 0; - volumes[j] = volumes[j + 1]; - volumes[j + 1] = 0; - } - break; - } - } - voices--; - if (voices < 0) voices = 0; - if (voice_place >= voices) { - voice_place = 0; - } - if (voices == 0) { -#ifdef CPIN_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; -#endif -#ifdef BPIN_AUDIO - DISABLE_AUDIO_COUNTER_1_ISR; - DISABLE_AUDIO_COUNTER_1_OUTPUT; -#endif - frequency = 0; - frequency_alt = 0; - volume = 0; - playing_note = false; - } - } -} - -#ifdef VIBRATO_ENABLE - -float mod(float a, int b) { - float r = fmod(a, b); - return r < 0 ? r + b : r; -} - -float vibrato(float average_freq) { -# ifdef VIBRATO_STRENGTH_ENABLE - float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength); -# else - float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter]; -# endif - vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0 / average_freq)), VIBRATO_LUT_LENGTH); - return vibrated_freq; -} - -#endif - -#ifdef CPIN_AUDIO -ISR(TIMER3_AUDIO_vect) { - float freq; - - if (playing_note) { - if (voices > 0) { -# ifdef BPIN_AUDIO - float freq_alt = 0; - if (voices > 1) { - if (polyphony_rate == 0) { - if (glissando) { - if (frequency_alt != 0 && frequency_alt < frequencies[voices - 2] && frequency_alt < frequencies[voices - 2] * pow(2, -440 / frequencies[voices - 2] / 12 / 2)) { - frequency_alt = frequency_alt * pow(2, 440 / frequency_alt / 12 / 2); - } else if (frequency_alt != 0 && frequency_alt > frequencies[voices - 2] && frequency_alt > frequencies[voices - 2] * pow(2, 440 / frequencies[voices - 2] / 12 / 2)) { - frequency_alt = frequency_alt * pow(2, -440 / frequency_alt / 12 / 2); - } else { - frequency_alt = frequencies[voices - 2]; - } - } else { - frequency_alt = frequencies[voices - 2]; - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq_alt = vibrato(frequency_alt); - } else { - freq_alt = frequency_alt; - } -# else - freq_alt = frequency_alt; -# endif - } - - if (envelope_index < 65535) { - envelope_index++; - } - - freq_alt = voice_envelope(freq_alt); - - if (freq_alt < 30.517578125) { - freq_alt = 30.52; - } - - TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq_alt * CPU_PRESCALER)); - TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq_alt * CPU_PRESCALER)) * note_timbre); - } -# endif - - if (polyphony_rate > 0) { - if (voices > 1) { - voice_place %= voices; - if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) { - voice_place = (voice_place + 1) % voices; - place = 0.0; - } - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequencies[voice_place]); - } else { - freq = frequencies[voice_place]; - } -# else - freq = frequencies[voice_place]; -# endif - } else { - if (glissando) { - if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, 440 / frequency / 12 / 2); - } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, -440 / frequency / 12 / 2); - } else { - frequency = frequencies[voices - 1]; - } - } else { - frequency = frequencies[voices - 1]; - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequency); - } else { - freq = frequency; - } -# else - freq = frequency; -# endif - } - - if (envelope_index < 65535) { - envelope_index++; - } - - freq = voice_envelope(freq); - - if (freq < 30.517578125) { - freq = 30.52; - } - - TIMER_3_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); - TIMER_3_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); - } - } - - if (playing_notes) { - if (note_frequency > 0) { -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(note_frequency); - } else { - freq = note_frequency; - } -# else - freq = note_frequency; -# endif - - if (envelope_index < 65535) { - envelope_index++; - } - freq = voice_envelope(freq); - - TIMER_3_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); - TIMER_3_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); - } else { - TIMER_3_PERIOD = 0; - TIMER_3_DUTY_CYCLE = 0; - } - - note_position++; - bool end_of_note = false; - if (TIMER_3_PERIOD > 0) { - if (!note_resting) - end_of_note = (note_position >= (note_length / TIMER_3_PERIOD * 0xFFFF - 1)); - else - end_of_note = (note_position >= (note_length)); - } else { - end_of_note = (note_position >= (note_length)); - } - - if (end_of_note) { - current_note++; - if (current_note >= notes_count) { - if (notes_repeat) { - current_note = 0; - } else { - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; - playing_notes = false; - return; - } - } - if (!note_resting) { - note_resting = true; - current_note--; - if ((*notes_pointer)[current_note][0] == (*notes_pointer)[current_note + 1][0]) { - note_frequency = 0; - note_length = 1; - } else { - note_frequency = (*notes_pointer)[current_note][0]; - note_length = 1; - } - } else { - note_resting = false; - envelope_index = 0; - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); - } - - note_position = 0; - } - } - - if (!audio_config.enable) { - playing_notes = false; - playing_note = false; - } -} -#endif - -#ifdef BPIN_AUDIO -ISR(TIMER1_AUDIO_vect) { -# if defined(BPIN_AUDIO) && !defined(CPIN_AUDIO) - float freq = 0; - - if (playing_note) { - if (voices > 0) { - if (polyphony_rate > 0) { - if (voices > 1) { - voice_place %= voices; - if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) { - voice_place = (voice_place + 1) % voices; - place = 0.0; - } - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequencies[voice_place]); - } else { - freq = frequencies[voice_place]; - } -# else - freq = frequencies[voice_place]; -# endif - } else { - if (glissando) { - if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, 440 / frequency / 12 / 2); - } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, -440 / frequency / 12 / 2); - } else { - frequency = frequencies[voices - 1]; - } - } else { - frequency = frequencies[voices - 1]; - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequency); - } else { - freq = frequency; - } -# else - freq = frequency; -# endif - } - - if (envelope_index < 65535) { - envelope_index++; - } - - freq = voice_envelope(freq); - - if (freq < 30.517578125) { - freq = 30.52; - } - - TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); - TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); - } - } - - if (playing_notes) { - if (note_frequency > 0) { -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(note_frequency); - } else { - freq = note_frequency; - } -# else - freq = note_frequency; -# endif - - if (envelope_index < 65535) { - envelope_index++; - } - freq = voice_envelope(freq); - - TIMER_1_PERIOD = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); - TIMER_1_DUTY_CYCLE = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); - } else { - TIMER_1_PERIOD = 0; - TIMER_1_DUTY_CYCLE = 0; - } - - note_position++; - bool end_of_note = false; - if (TIMER_1_PERIOD > 0) { - if (!note_resting) - end_of_note = (note_position >= (note_length / TIMER_1_PERIOD * 0xFFFF - 1)); - else - end_of_note = (note_position >= (note_length)); - } else { - end_of_note = (note_position >= (note_length)); - } - - if (end_of_note) { - current_note++; - if (current_note >= notes_count) { - if (notes_repeat) { - current_note = 0; - } else { - DISABLE_AUDIO_COUNTER_1_ISR; - DISABLE_AUDIO_COUNTER_1_OUTPUT; - playing_notes = false; - return; - } - } - if (!note_resting) { - note_resting = true; - current_note--; - if ((*notes_pointer)[current_note][0] == (*notes_pointer)[current_note + 1][0]) { - note_frequency = 0; - note_length = 1; - } else { - note_frequency = (*notes_pointer)[current_note][0]; - note_length = 1; - } - } else { - note_resting = false; - envelope_index = 0; - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); - } - - note_position = 0; - } - } - - if (!audio_config.enable) { - playing_notes = false; - playing_note = false; - } -# endif -} -#endif - -void play_note(float freq, int vol) { - dprintf("audio play note freq=%d vol=%d", (int)freq, vol); - - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable && voices < 8) { -#ifdef CPIN_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; -#endif -#ifdef BPIN_AUDIO - DISABLE_AUDIO_COUNTER_1_ISR; -#endif - - // Cancel notes if notes are playing - if (playing_notes) stop_all_notes(); - - playing_note = true; - - envelope_index = 0; - - if (freq > 0) { - frequencies[voices] = freq; - volumes[voices] = vol; - voices++; - } - -#ifdef CPIN_AUDIO - ENABLE_AUDIO_COUNTER_3_ISR; - ENABLE_AUDIO_COUNTER_3_OUTPUT; -#endif -#ifdef BPIN_AUDIO -# ifdef CPIN_AUDIO - if (voices > 1) { - ENABLE_AUDIO_COUNTER_1_ISR; - ENABLE_AUDIO_COUNTER_1_OUTPUT; - } -# else - ENABLE_AUDIO_COUNTER_1_ISR; - ENABLE_AUDIO_COUNTER_1_OUTPUT; -# endif -#endif - } -} - -void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat) { - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable) { -#ifdef CPIN_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; -#endif -#ifdef BPIN_AUDIO - DISABLE_AUDIO_COUNTER_1_ISR; -#endif - - // Cancel note if a note is playing - if (playing_note) stop_all_notes(); - - playing_notes = true; - - notes_pointer = np; - notes_count = n_count; - notes_repeat = n_repeat; - - place = 0; - current_note = 0; - - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); - note_position = 0; - -#ifdef CPIN_AUDIO - ENABLE_AUDIO_COUNTER_3_ISR; - ENABLE_AUDIO_COUNTER_3_OUTPUT; -#endif -#ifdef BPIN_AUDIO -# ifndef CPIN_AUDIO - ENABLE_AUDIO_COUNTER_1_ISR; - ENABLE_AUDIO_COUNTER_1_OUTPUT; -# endif -#endif - } -} - -bool is_playing_notes(void) { return playing_notes; } - -bool is_audio_on(void) { return (audio_config.enable != 0); } - -void audio_toggle(void) { - audio_config.enable ^= 1; - eeconfig_update_audio(audio_config.raw); - if (audio_config.enable) audio_on_user(); -} - -void audio_on(void) { - audio_config.enable = 1; - eeconfig_update_audio(audio_config.raw); - audio_on_user(); - PLAY_SONG(audio_on_song); -} - -void audio_off(void) { - PLAY_SONG(audio_off_song); - wait_ms(100); - stop_all_notes(); - audio_config.enable = 0; - eeconfig_update_audio(audio_config.raw); -} - -#ifdef VIBRATO_ENABLE - -// Vibrato rate functions - -void set_vibrato_rate(float rate) { vibrato_rate = rate; } - -void increase_vibrato_rate(float change) { vibrato_rate *= change; } - -void decrease_vibrato_rate(float change) { vibrato_rate /= change; } - -# ifdef VIBRATO_STRENGTH_ENABLE - -void set_vibrato_strength(float strength) { vibrato_strength = strength; } - -void increase_vibrato_strength(float change) { vibrato_strength *= change; } - -void decrease_vibrato_strength(float change) { vibrato_strength /= change; } - -# endif /* VIBRATO_STRENGTH_ENABLE */ - -#endif /* VIBRATO_ENABLE */ - -// Polyphony functions - -void set_polyphony_rate(float rate) { polyphony_rate = rate; } - -void enable_polyphony() { polyphony_rate = 5; } - -void disable_polyphony() { polyphony_rate = 0; } - -void increase_polyphony_rate(float change) { polyphony_rate *= change; } - -void decrease_polyphony_rate(float change) { polyphony_rate /= change; } - -// Timbre function - -void set_timbre(float timbre) { note_timbre = timbre; } - -// Tempo functions - -void set_tempo(uint8_t tempo) { note_tempo = tempo; } - -void decrease_tempo(uint8_t tempo_change) { note_tempo += tempo_change; } - -void increase_tempo(uint8_t tempo_change) { - if (note_tempo - tempo_change < 10) { - note_tempo = 10; - } else { - note_tempo -= tempo_change; - } -} diff --git a/quantum/audio/audio_chibios.c b/quantum/audio/audio_chibios.c deleted file mode 100644 index b267e574633..00000000000 --- a/quantum/audio/audio_chibios.c +++ /dev/null @@ -1,721 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "audio.h" -#include -#include - -#include -#include "print.h" -#include "keymap.h" - -#include "eeconfig.h" - -// ----------------------------------------------------------------------------- - -int voices = 0; -int voice_place = 0; -float frequency = 0; -float frequency_alt = 0; -int volume = 0; -long position = 0; - -float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -bool sliding = false; - -float place = 0; - -uint8_t *sample; -uint16_t sample_length = 0; - -bool playing_notes = false; -bool playing_note = false; -float note_frequency = 0; -float note_length = 0; -uint8_t note_tempo = TEMPO_DEFAULT; -float note_timbre = TIMBRE_DEFAULT; -uint16_t note_position = 0; -float (*notes_pointer)[][2]; -uint16_t notes_count; -bool notes_repeat; -bool note_resting = false; - -uint16_t current_note = 0; -uint8_t rest_counter = 0; - -#ifdef VIBRATO_ENABLE -float vibrato_counter = 0; -float vibrato_strength = .5; -float vibrato_rate = 0.125; -#endif - -float polyphony_rate = 0; - -static bool audio_initialized = false; - -audio_config_t audio_config; - -uint16_t envelope_index = 0; -bool glissando = true; - -#ifndef STARTUP_SONG -# define STARTUP_SONG SONG(STARTUP_SOUND) -#endif -float startup_song[][2] = STARTUP_SONG; - -static void gpt_cb8(GPTDriver *gptp); - -#define DAC_BUFFER_SIZE 100 -#ifndef DAC_SAMPLE_MAX -# define DAC_SAMPLE_MAX 65535U -#endif - -#define START_CHANNEL_1() \ - gptStart(&GPTD6, &gpt6cfg1); \ - gptStartContinuous(&GPTD6, 2U); \ - palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG) -#define START_CHANNEL_2() \ - gptStart(&GPTD7, &gpt7cfg1); \ - gptStartContinuous(&GPTD7, 2U); \ - palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG) -#define STOP_CHANNEL_1() \ - gptStopTimer(&GPTD6); \ - palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL); \ - palSetPad(GPIOA, 4) -#define STOP_CHANNEL_2() \ - gptStopTimer(&GPTD7); \ - palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); \ - palSetPad(GPIOA, 5) -#define RESTART_CHANNEL_1() \ - STOP_CHANNEL_1(); \ - START_CHANNEL_1() -#define RESTART_CHANNEL_2() \ - STOP_CHANNEL_2(); \ - START_CHANNEL_2() -#define UPDATE_CHANNEL_1_FREQ(freq) \ - gpt6cfg1.frequency = freq * DAC_BUFFER_SIZE; \ - RESTART_CHANNEL_1() -#define UPDATE_CHANNEL_2_FREQ(freq) \ - gpt7cfg1.frequency = freq * DAC_BUFFER_SIZE; \ - RESTART_CHANNEL_2() -#define GET_CHANNEL_1_FREQ (uint16_t)(gpt6cfg1.frequency * DAC_BUFFER_SIZE) -#define GET_CHANNEL_2_FREQ (uint16_t)(gpt7cfg1.frequency * DAC_BUFFER_SIZE) - -/* - * GPT6 configuration. - */ -// static const GPTConfig gpt6cfg1 = { -// .frequency = 1000000U, -// .callback = NULL, -// .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ -// .dier = 0U -// }; - -GPTConfig gpt6cfg1 = {.frequency = 440U * DAC_BUFFER_SIZE, - .callback = NULL, - .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ - .dier = 0U}; - -GPTConfig gpt7cfg1 = {.frequency = 440U * DAC_BUFFER_SIZE, - .callback = NULL, - .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ - .dier = 0U}; - -GPTConfig gpt8cfg1 = {.frequency = 10, - .callback = gpt_cb8, - .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ - .dier = 0U}; - -/* - * DAC test buffer (sine wave). - */ -// static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = { -// 2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437, -// 2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846, -// 2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221, -// 3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544, -// 3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801, -// 3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982, -// 3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078, -// 4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086, -// 4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004, -// 3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837, -// 3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591, -// 3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278, -// 3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912, -// 2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507, -// 2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082, -// 2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657, -// 1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248, -// 1215, 1182, 1150, 1118, 1086, 1055, 1024, 993, 963, 933, 903, 873, -// 844, 816, 787, 759, 732, 705, 678, 651, 626, 600, 575, 550, -// 526, 503, 479, 457, 434, 413, 391, 371, 350, 331, 312, 293, -// 275, 257, 240, 224, 208, 192, 177, 163, 150, 136, 124, 112, -// 101, 90, 80, 70, 61, 53, 45, 38, 32, 26, 20, 16, -// 12, 8, 5, 3, 2, 1, 0, 1, 2, 3, 5, 8, -// 12, 16, 20, 26, 32, 38, 45, 53, 61, 70, 80, 90, -// 101, 112, 124, 136, 150, 163, 177, 192, 208, 224, 240, 257, -// 275, 293, 312, 331, 350, 371, 391, 413, 434, 457, 479, 503, -// 526, 550, 575, 600, 626, 651, 678, 705, 732, 759, 787, 816, -// 844, 873, 903, 933, 963, 993, 1024, 1055, 1086, 1118, 1150, 1182, -// 1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587, -// 1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012 -// }; - -// static const dacsample_t dac_buffer_2[DAC_BUFFER_SIZE] = { -// 12, 8, 5, 3, 2, 1, 0, 1, 2, 3, 5, 8, -// 12, 16, 20, 26, 32, 38, 45, 53, 61, 70, 80, 90, -// 101, 112, 124, 136, 150, 163, 177, 192, 208, 224, 240, 257, -// 275, 293, 312, 331, 350, 371, 391, 413, 434, 457, 479, 503, -// 526, 550, 575, 600, 626, 651, 678, 705, 732, 759, 787, 816, -// 844, 873, 903, 933, 963, 993, 1024, 1055, 1086, 1118, 1150, 1182, -// 1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587, -// 1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012, -// 2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437, -// 2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846, -// 2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221, -// 3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544, -// 3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801, -// 3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982, -// 3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078, -// 4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086, -// 4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004, -// 3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837, -// 3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591, -// 3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278, -// 3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912, -// 2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507, -// 2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082, -// 2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657, -// 1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248, -// 1215, 1182, 1150, 1118, 1086, 1055, 1024, 993, 963, 933, 903, 873, -// 844, 816, 787, 759, 732, 705, 678, 651, 626, 600, 575, 550, -// 526, 503, 479, 457, 434, 413, 391, 371, 350, 331, 312, 293, -// 275, 257, 240, 224, 208, 192, 177, 163, 150, 136, 124, 112, -// 101, 90, 80, 70, 61, 53, 45, 38, 32, 26, 20, 16 -// }; - -// squarewave -static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = { - // First half is max, second half is 0 - [0 ... DAC_BUFFER_SIZE / 2 - 1] = DAC_SAMPLE_MAX, - [DAC_BUFFER_SIZE / 2 ... DAC_BUFFER_SIZE - 1] = 0, -}; - -// squarewave -static const dacsample_t dac_buffer_2[DAC_BUFFER_SIZE] = { - // opposite of dac_buffer above - [0 ... DAC_BUFFER_SIZE / 2 - 1] = 0, - [DAC_BUFFER_SIZE / 2 ... DAC_BUFFER_SIZE - 1] = DAC_SAMPLE_MAX, -}; - -/* - * DAC streaming callback. - */ -size_t nz = 0; -static void end_cb1(DACDriver *dacp) { - (void)dacp; - - nz++; - if ((nz % 1000) == 0) { - // palTogglePad(GPIOD, GPIOD_LED3); - } -} - -/* - * DAC error callback. - */ -static void error_cb1(DACDriver *dacp, dacerror_t err) { - (void)dacp; - (void)err; - - chSysHalt("DAC failure"); -} - -static const DACConfig dac1cfg1 = {.init = DAC_SAMPLE_MAX, .datamode = DAC_DHRM_12BIT_RIGHT}; - -static const DACConversionGroup dacgrpcfg1 = {.num_channels = 1U, .end_cb = end_cb1, .error_cb = error_cb1, .trigger = DAC_TRG(0)}; - -static const DACConfig dac1cfg2 = {.init = DAC_SAMPLE_MAX, .datamode = DAC_DHRM_12BIT_RIGHT}; - -static const DACConversionGroup dacgrpcfg2 = {.num_channels = 1U, .end_cb = end_cb1, .error_cb = error_cb1, .trigger = DAC_TRG(0)}; - -void audio_init() { - if (audio_initialized) { - return; - } - -// Check EEPROM -#ifdef EEPROM_ENABLE - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - audio_config.raw = eeconfig_read_audio(); -#else // ARM EEPROM - audio_config.enable = true; -# ifdef AUDIO_CLICKY_ON - audio_config.clicky_enable = true; -# endif -#endif // ARM EEPROM - - /* - * Starting DAC1 driver, setting up the output pin as analog as suggested - * by the Reference Manual. - */ - palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG); - palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); - dacStart(&DACD1, &dac1cfg1); - dacStart(&DACD2, &dac1cfg2); - - /* - * Start the note timer - */ - gptStart(&GPTD8, &gpt8cfg1); - gptStartContinuous(&GPTD8, 2U); - - /* - * Starting GPT6/7 driver, it is used for triggering the DAC. - */ - START_CHANNEL_1(); - START_CHANNEL_2(); - - /* - * Starting a continuous conversion. - */ - dacStartConversion(&DACD1, &dacgrpcfg1, (dacsample_t *)dac_buffer, DAC_BUFFER_SIZE); - dacStartConversion(&DACD2, &dacgrpcfg2, (dacsample_t *)dac_buffer_2, DAC_BUFFER_SIZE); - - audio_initialized = true; - - stop_all_notes(); -} - -void audio_startup() { - if (audio_config.enable) { - PLAY_SONG(startup_song); - } -} - -void stop_all_notes() { - dprintf("audio stop all notes"); - - if (!audio_initialized) { - audio_init(); - } - voices = 0; - - gptStopTimer(&GPTD6); - gptStopTimer(&GPTD7); - gptStopTimer(&GPTD8); - - playing_notes = false; - playing_note = false; - frequency = 0; - frequency_alt = 0; - volume = 0; - - for (uint8_t i = 0; i < 8; i++) { - frequencies[i] = 0; - volumes[i] = 0; - } -} - -void stop_note(float freq) { - dprintf("audio stop note freq=%d", (int)freq); - - if (playing_note) { - if (!audio_initialized) { - audio_init(); - } - for (int i = 7; i >= 0; i--) { - if (frequencies[i] == freq) { - frequencies[i] = 0; - volumes[i] = 0; - for (int j = i; (j < 7); j++) { - frequencies[j] = frequencies[j + 1]; - frequencies[j + 1] = 0; - volumes[j] = volumes[j + 1]; - volumes[j + 1] = 0; - } - break; - } - } - voices--; - if (voices < 0) { - voices = 0; - } - if (voice_place >= voices) { - voice_place = 0; - } - if (voices == 0) { - STOP_CHANNEL_1(); - STOP_CHANNEL_2(); - gptStopTimer(&GPTD8); - frequency = 0; - frequency_alt = 0; - volume = 0; - playing_note = false; - } - } -} - -#ifdef VIBRATO_ENABLE - -float mod(float a, int b) { - float r = fmod(a, b); - return r < 0 ? r + b : r; -} - -float vibrato(float average_freq) { -# ifdef VIBRATO_STRENGTH_ENABLE - float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength); -# else - float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter]; -# endif - vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0 / average_freq)), VIBRATO_LUT_LENGTH); - return vibrated_freq; -} - -#endif - -static void gpt_cb8(GPTDriver *gptp) { - float freq; - - if (playing_note) { - if (voices > 0) { - float freq_alt = 0; - if (voices > 1) { - if (polyphony_rate == 0) { - if (glissando) { - if (frequency_alt != 0 && frequency_alt < frequencies[voices - 2] && frequency_alt < frequencies[voices - 2] * pow(2, -440 / frequencies[voices - 2] / 12 / 2)) { - frequency_alt = frequency_alt * pow(2, 440 / frequency_alt / 12 / 2); - } else if (frequency_alt != 0 && frequency_alt > frequencies[voices - 2] && frequency_alt > frequencies[voices - 2] * pow(2, 440 / frequencies[voices - 2] / 12 / 2)) { - frequency_alt = frequency_alt * pow(2, -440 / frequency_alt / 12 / 2); - } else { - frequency_alt = frequencies[voices - 2]; - } - } else { - frequency_alt = frequencies[voices - 2]; - } - -#ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq_alt = vibrato(frequency_alt); - } else { - freq_alt = frequency_alt; - } -#else - freq_alt = frequency_alt; -#endif - } - - if (envelope_index < 65535) { - envelope_index++; - } - - freq_alt = voice_envelope(freq_alt); - - if (freq_alt < 30.517578125) { - freq_alt = 30.52; - } - - if (GET_CHANNEL_2_FREQ != (uint16_t)freq_alt) { - UPDATE_CHANNEL_2_FREQ(freq_alt); - } else { - RESTART_CHANNEL_2(); - } - // note_timbre; - } - - if (polyphony_rate > 0) { - if (voices > 1) { - voice_place %= voices; - if (place++ > (frequencies[voice_place] / polyphony_rate)) { - voice_place = (voice_place + 1) % voices; - place = 0.0; - } - } - -#ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequencies[voice_place]); - } else { - freq = frequencies[voice_place]; - } -#else - freq = frequencies[voice_place]; -#endif - } else { - if (glissando) { - if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, 440 / frequency / 12 / 2); - } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, -440 / frequency / 12 / 2); - } else { - frequency = frequencies[voices - 1]; - } - } else { - frequency = frequencies[voices - 1]; - } - -#ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequency); - } else { - freq = frequency; - } -#else - freq = frequency; -#endif - } - - if (envelope_index < 65535) { - envelope_index++; - } - - freq = voice_envelope(freq); - - if (freq < 30.517578125) { - freq = 30.52; - } - - if (GET_CHANNEL_1_FREQ != (uint16_t)freq) { - UPDATE_CHANNEL_1_FREQ(freq); - } else { - RESTART_CHANNEL_1(); - } - // note_timbre; - } - } - - if (playing_notes) { - if (note_frequency > 0) { -#ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(note_frequency); - } else { - freq = note_frequency; - } -#else - freq = note_frequency; -#endif - - if (envelope_index < 65535) { - envelope_index++; - } - freq = voice_envelope(freq); - - if (GET_CHANNEL_1_FREQ != (uint16_t)freq) { - UPDATE_CHANNEL_1_FREQ(freq); - UPDATE_CHANNEL_2_FREQ(freq); - } - // note_timbre; - } else { - // gptStopTimer(&GPTD6); - // gptStopTimer(&GPTD7); - } - - note_position++; - bool end_of_note = false; - if (GET_CHANNEL_1_FREQ > 0) { - if (!note_resting) - end_of_note = (note_position >= (note_length * 8 - 1)); - else - end_of_note = (note_position >= (note_length * 8)); - } else { - end_of_note = (note_position >= (note_length * 8)); - } - - if (end_of_note) { - current_note++; - if (current_note >= notes_count) { - if (notes_repeat) { - current_note = 0; - } else { - STOP_CHANNEL_1(); - STOP_CHANNEL_2(); - // gptStopTimer(&GPTD8); - playing_notes = false; - return; - } - } - if (!note_resting) { - note_resting = true; - current_note--; - if ((*notes_pointer)[current_note][0] == (*notes_pointer)[current_note + 1][0]) { - note_frequency = 0; - note_length = 1; - } else { - note_frequency = (*notes_pointer)[current_note][0]; - note_length = 1; - } - } else { - note_resting = false; - envelope_index = 0; - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); - } - - note_position = 0; - } - } - - if (!audio_config.enable) { - playing_notes = false; - playing_note = false; - } -} - -void play_note(float freq, int vol) { - dprintf("audio play note freq=%d vol=%d", (int)freq, vol); - - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable && voices < 8) { - // Cancel notes if notes are playing - if (playing_notes) { - stop_all_notes(); - } - - playing_note = true; - - envelope_index = 0; - - if (freq > 0) { - frequencies[voices] = freq; - volumes[voices] = vol; - voices++; - } - - gptStart(&GPTD8, &gpt8cfg1); - gptStartContinuous(&GPTD8, 2U); - RESTART_CHANNEL_1(); - RESTART_CHANNEL_2(); - } -} - -void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat) { - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable) { - // Cancel note if a note is playing - if (playing_note) { - stop_all_notes(); - } - - playing_notes = true; - - notes_pointer = np; - notes_count = n_count; - notes_repeat = n_repeat; - - place = 0; - current_note = 0; - - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); - note_position = 0; - - gptStart(&GPTD8, &gpt8cfg1); - gptStartContinuous(&GPTD8, 2U); - RESTART_CHANNEL_1(); - RESTART_CHANNEL_2(); - } -} - -bool is_playing_notes(void) { return playing_notes; } - -bool is_audio_on(void) { return (audio_config.enable != 0); } - -void audio_toggle(void) { - if (audio_config.enable) { - stop_all_notes(); - } - audio_config.enable ^= 1; - eeconfig_update_audio(audio_config.raw); - if (audio_config.enable) { - audio_on_user(); - } -} - -void audio_on(void) { - audio_config.enable = 1; - eeconfig_update_audio(audio_config.raw); - audio_on_user(); -} - -void audio_off(void) { - stop_all_notes(); - audio_config.enable = 0; - eeconfig_update_audio(audio_config.raw); -} - -#ifdef VIBRATO_ENABLE - -// Vibrato rate functions - -void set_vibrato_rate(float rate) { vibrato_rate = rate; } - -void increase_vibrato_rate(float change) { vibrato_rate *= change; } - -void decrease_vibrato_rate(float change) { vibrato_rate /= change; } - -# ifdef VIBRATO_STRENGTH_ENABLE - -void set_vibrato_strength(float strength) { vibrato_strength = strength; } - -void increase_vibrato_strength(float change) { vibrato_strength *= change; } - -void decrease_vibrato_strength(float change) { vibrato_strength /= change; } - -# endif /* VIBRATO_STRENGTH_ENABLE */ - -#endif /* VIBRATO_ENABLE */ - -// Polyphony functions - -void set_polyphony_rate(float rate) { polyphony_rate = rate; } - -void enable_polyphony() { polyphony_rate = 5; } - -void disable_polyphony() { polyphony_rate = 0; } - -void increase_polyphony_rate(float change) { polyphony_rate *= change; } - -void decrease_polyphony_rate(float change) { polyphony_rate /= change; } - -// Timbre function - -void set_timbre(float timbre) { note_timbre = timbre; } - -// Tempo functions - -void set_tempo(uint8_t tempo) { note_tempo = tempo; } - -void decrease_tempo(uint8_t tempo_change) { note_tempo += tempo_change; } - -void increase_tempo(uint8_t tempo_change) { - if (note_tempo - tempo_change < 10) { - note_tempo = 10; - } else { - note_tempo -= tempo_change; - } -} diff --git a/quantum/audio/audio_pwm.c b/quantum/audio/audio_pwm.c deleted file mode 100644 index d93ac4bb408..00000000000 --- a/quantum/audio/audio_pwm.c +++ /dev/null @@ -1,606 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include -#include -//#include -#include -#include -#include -#include "print.h" -#include "audio.h" -#include "keymap.h" - -#include "eeconfig.h" - -#define PI 3.14159265 - -#define CPU_PRESCALER 8 - -#ifndef STARTUP_SONG -# define STARTUP_SONG SONG(STARTUP_SOUND) -#endif -float startup_song[][2] = STARTUP_SONG; - -// Timer Abstractions - -// TIMSK3 - Timer/Counter #3 Interrupt Mask Register -// Turn on/off 3A interputs, stopping/enabling the ISR calls -#define ENABLE_AUDIO_COUNTER_3_ISR TIMSK3 |= _BV(OCIE3A) -#define DISABLE_AUDIO_COUNTER_3_ISR TIMSK3 &= ~_BV(OCIE3A) - -// TCCR3A: Timer/Counter #3 Control Register -// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6 -#define ENABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A |= _BV(COM3A1); -#define DISABLE_AUDIO_COUNTER_3_OUTPUT TCCR3A &= ~(_BV(COM3A1) | _BV(COM3A0)); - -#define NOTE_PERIOD ICR3 -#define NOTE_DUTY_CYCLE OCR3A - -#ifdef PWM_AUDIO -# include "wave.h" -# define SAMPLE_DIVIDER 39 -# define SAMPLE_RATE (2000000.0 / SAMPLE_DIVIDER / 2048) -// Resistor value of 1/ (2 * PI * 10nF * (2000000 hertz / SAMPLE_DIVIDER / 10)) for 10nF cap - -float places[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -uint16_t place_int = 0; -bool repeat = true; -#endif - -void delay_us(int count) { - while (count--) { - _delay_us(1); - } -} - -int voices = 0; -int voice_place = 0; -float frequency = 0; -int volume = 0; -long position = 0; - -float frequencies[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -int volumes[8] = {0, 0, 0, 0, 0, 0, 0, 0}; -bool sliding = false; - -float place = 0; - -uint8_t* sample; -uint16_t sample_length = 0; -// float freq = 0; - -bool playing_notes = false; -bool playing_note = false; -float note_frequency = 0; -float note_length = 0; -uint8_t note_tempo = TEMPO_DEFAULT; -float note_timbre = TIMBRE_DEFAULT; -uint16_t note_position = 0; -float (*notes_pointer)[][2]; -uint16_t notes_count; -bool notes_repeat; -float notes_rest; -bool note_resting = false; - -uint16_t current_note = 0; -uint8_t rest_counter = 0; - -#ifdef VIBRATO_ENABLE -float vibrato_counter = 0; -float vibrato_strength = .5; -float vibrato_rate = 0.125; -#endif - -float polyphony_rate = 0; - -static bool audio_initialized = false; - -audio_config_t audio_config; - -uint16_t envelope_index = 0; - -void audio_init() { - // Check EEPROM - if (!eeconfig_is_enabled()) { - eeconfig_init(); - } - audio_config.raw = eeconfig_read_audio(); - -#ifdef PWM_AUDIO - - PLLFRQ = _BV(PDIV2); - PLLCSR = _BV(PLLE); - while (!(PLLCSR & _BV(PLOCK))) - ; - PLLFRQ |= _BV(PLLTM0); /* PCK 48MHz */ - - /* Init a fast PWM on Timer4 */ - TCCR4A = _BV(COM4A0) | _BV(PWM4A); /* Clear OC4A on Compare Match */ - TCCR4B = _BV(CS40); /* No prescaling => f = PCK/256 = 187500Hz */ - OCR4A = 0; - - /* Enable the OC4A output */ - DDRC |= _BV(PORTC6); - - DISABLE_AUDIO_COUNTER_3_ISR; // Turn off 3A interputs - - TCCR3A = 0x0; // Options not needed - TCCR3B = _BV(CS31) | _BV(CS30) | _BV(WGM32); // 64th prescaling and CTC - OCR3A = SAMPLE_DIVIDER - 1; // Correct count/compare, related to sample playback - -#else - - // Set port PC6 (OC3A and /OC4A) as output - DDRC |= _BV(PORTC6); - - DISABLE_AUDIO_COUNTER_3_ISR; - - // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers - // Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6 - // Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14 (Period = ICR3, Duty Cycle = OCR3A) - // Clock Select (CS3n) = 0b010 = Clock / 8 - TCCR3A = (0 << COM3A1) | (0 << COM3A0) | (1 << WGM31) | (0 << WGM30); - TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30); - -#endif - - audio_initialized = true; -} - -void audio_startup() { - if (audio_config.enable) { - PLAY_SONG(startup_song); - } -} - -void stop_all_notes() { - if (!audio_initialized) { - audio_init(); - } - voices = 0; -#ifdef PWM_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; -#else - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - - playing_notes = false; - playing_note = false; - frequency = 0; - volume = 0; - - for (uint8_t i = 0; i < 8; i++) { - frequencies[i] = 0; - volumes[i] = 0; - } -} - -void stop_note(float freq) { - if (playing_note) { - if (!audio_initialized) { - audio_init(); - } -#ifdef PWM_AUDIO - freq = freq / SAMPLE_RATE; -#endif - for (int i = 7; i >= 0; i--) { - if (frequencies[i] == freq) { - frequencies[i] = 0; - volumes[i] = 0; - for (int j = i; (j < 7); j++) { - frequencies[j] = frequencies[j + 1]; - frequencies[j + 1] = 0; - volumes[j] = volumes[j + 1]; - volumes[j + 1] = 0; - } - break; - } - } - voices--; - if (voices < 0) voices = 0; - if (voice_place >= voices) { - voice_place = 0; - } - if (voices == 0) { -#ifdef PWM_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; -#else - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - frequency = 0; - volume = 0; - playing_note = false; - } - } -} - -#ifdef VIBRATO_ENABLE - -float mod(float a, int b) { - float r = fmod(a, b); - return r < 0 ? r + b : r; -} - -float vibrato(float average_freq) { -# ifdef VIBRATO_STRENGTH_ENABLE - float vibrated_freq = average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength); -# else - float vibrated_freq = average_freq * vibrato_lut[(int)vibrato_counter]; -# endif - vibrato_counter = mod((vibrato_counter + vibrato_rate * (1.0 + 440.0 / average_freq)), VIBRATO_LUT_LENGTH); - return vibrated_freq; -} - -#endif - -ISR(TIMER3_COMPA_vect) { - if (playing_note) { -#ifdef PWM_AUDIO - if (voices == 1) { - // SINE - OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 2; - - // SQUARE - // if (((int)place) >= 1024){ - // OCR4A = 0xFF >> 2; - // } else { - // OCR4A = 0x00; - // } - - // SAWTOOTH - // OCR4A = (int)place / 4; - - // TRIANGLE - // if (((int)place) >= 1024) { - // OCR4A = (int)place / 2; - // } else { - // OCR4A = 2048 - (int)place / 2; - // } - - place += frequency; - - if (place >= SINE_LENGTH) place -= SINE_LENGTH; - - } else { - int sum = 0; - for (int i = 0; i < voices; i++) { - // SINE - sum += pgm_read_byte(&sinewave[(uint16_t)places[i]]) >> 2; - - // SQUARE - // if (((int)places[i]) >= 1024){ - // sum += 0xFF >> 2; - // } else { - // sum += 0x00; - // } - - places[i] += frequencies[i]; - - if (places[i] >= SINE_LENGTH) places[i] -= SINE_LENGTH; - } - OCR4A = sum; - } -#else - if (voices > 0) { - float freq; - if (polyphony_rate > 0) { - if (voices > 1) { - voice_place %= voices; - if (place++ > (frequencies[voice_place] / polyphony_rate / CPU_PRESCALER)) { - voice_place = (voice_place + 1) % voices; - place = 0.0; - } - } -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequencies[voice_place]); - } else { -# else - { -# endif - freq = frequencies[voice_place]; - } - } else { - if (frequency != 0 && frequency < frequencies[voices - 1] && frequency < frequencies[voices - 1] * pow(2, -440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, 440 / frequency / 12 / 2); - } else if (frequency != 0 && frequency > frequencies[voices - 1] && frequency > frequencies[voices - 1] * pow(2, 440 / frequencies[voices - 1] / 12 / 2)) { - frequency = frequency * pow(2, -440 / frequency / 12 / 2); - } else { - frequency = frequencies[voices - 1]; - } - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(frequency); - } else { -# else - { -# endif - freq = frequency; - } - } - - if (envelope_index < 65535) { - envelope_index++; - } - freq = voice_envelope(freq); - - if (freq < 30.517578125) freq = 30.52; - NOTE_PERIOD = (int)(((double)F_CPU) / (freq * CPU_PRESCALER)); // Set max to the period - NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); // Set compare to half the period - } -#endif - } - - // SAMPLE - // OCR4A = pgm_read_byte(&sample[(uint16_t)place_int]); - - // place_int++; - - // if (place_int >= sample_length) - // if (repeat) - // place_int -= sample_length; - // else - // DISABLE_AUDIO_COUNTER_3_ISR; - - if (playing_notes) { -#ifdef PWM_AUDIO - OCR4A = pgm_read_byte(&sinewave[(uint16_t)place]) >> 0; - - place += note_frequency; - if (place >= SINE_LENGTH) place -= SINE_LENGTH; -#else - if (note_frequency > 0) { - float freq; - -# ifdef VIBRATO_ENABLE - if (vibrato_strength > 0) { - freq = vibrato(note_frequency); - } else { -# else - { -# endif - freq = note_frequency; - } - - if (envelope_index < 65535) { - envelope_index++; - } - freq = voice_envelope(freq); - - NOTE_PERIOD = (int)(((double)F_CPU) / (freq * CPU_PRESCALER)); // Set max to the period - NOTE_DUTY_CYCLE = (int)((((double)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre); // Set compare to half the period - } else { - NOTE_PERIOD = 0; - NOTE_DUTY_CYCLE = 0; - } -#endif - - note_position++; - bool end_of_note = false; - if (NOTE_PERIOD > 0) - end_of_note = (note_position >= (note_length / NOTE_PERIOD * 0xFFFF)); - else - end_of_note = (note_position >= (note_length * 0x7FF)); - if (end_of_note) { - current_note++; - if (current_note >= notes_count) { - if (notes_repeat) { - current_note = 0; - } else { -#ifdef PWM_AUDIO - DISABLE_AUDIO_COUNTER_3_ISR; -#else - DISABLE_AUDIO_COUNTER_3_ISR; - DISABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - playing_notes = false; - return; - } - } - if (!note_resting && (notes_rest > 0)) { - note_resting = true; - note_frequency = 0; - note_length = notes_rest; - current_note--; - } else { - note_resting = false; -#ifdef PWM_AUDIO - note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE; - note_length = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100); -#else - envelope_index = 0; - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); -#endif - } - note_position = 0; - } - } - - if (!audio_config.enable) { - playing_notes = false; - playing_note = false; - } -} - -void play_note(float freq, int vol) { - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable && voices < 8) { - DISABLE_AUDIO_COUNTER_3_ISR; - - // Cancel notes if notes are playing - if (playing_notes) stop_all_notes(); - - playing_note = true; - - envelope_index = 0; - -#ifdef PWM_AUDIO - freq = freq / SAMPLE_RATE; -#endif - if (freq > 0) { - frequencies[voices] = freq; - volumes[voices] = vol; - voices++; - } - -#ifdef PWM_AUDIO - ENABLE_AUDIO_COUNTER_3_ISR; -#else - ENABLE_AUDIO_COUNTER_3_ISR; - ENABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - } -} - -void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat, float n_rest) { - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable) { - DISABLE_AUDIO_COUNTER_3_ISR; - - // Cancel note if a note is playing - if (playing_note) stop_all_notes(); - - playing_notes = true; - - notes_pointer = np; - notes_count = n_count; - notes_repeat = n_repeat; - notes_rest = n_rest; - - place = 0; - current_note = 0; - -#ifdef PWM_AUDIO - note_frequency = (*notes_pointer)[current_note][0] / SAMPLE_RATE; - note_length = (*notes_pointer)[current_note][1] * (((float)note_tempo) / 100); -#else - note_frequency = (*notes_pointer)[current_note][0]; - note_length = ((*notes_pointer)[current_note][1] / 4) * (((float)note_tempo) / 100); -#endif - note_position = 0; - -#ifdef PWM_AUDIO - ENABLE_AUDIO_COUNTER_3_ISR; -#else - ENABLE_AUDIO_COUNTER_3_ISR; - ENABLE_AUDIO_COUNTER_3_OUTPUT; -#endif - } -} - -#ifdef PWM_AUDIO -void play_sample(uint8_t* s, uint16_t l, bool r) { - if (!audio_initialized) { - audio_init(); - } - - if (audio_config.enable) { - DISABLE_AUDIO_COUNTER_3_ISR; - stop_all_notes(); - place_int = 0; - sample = s; - sample_length = l; - repeat = r; - - ENABLE_AUDIO_COUNTER_3_ISR; - } -} -#endif - -void audio_toggle(void) { - audio_config.enable ^= 1; - eeconfig_update_audio(audio_config.raw); -} - -void audio_on(void) { - audio_config.enable = 1; - eeconfig_update_audio(audio_config.raw); -} - -void audio_off(void) { - audio_config.enable = 0; - eeconfig_update_audio(audio_config.raw); -} - -#ifdef VIBRATO_ENABLE - -// Vibrato rate functions - -void set_vibrato_rate(float rate) { vibrato_rate = rate; } - -void increase_vibrato_rate(float change) { vibrato_rate *= change; } - -void decrease_vibrato_rate(float change) { vibrato_rate /= change; } - -# ifdef VIBRATO_STRENGTH_ENABLE - -void set_vibrato_strength(float strength) { vibrato_strength = strength; } - -void increase_vibrato_strength(float change) { vibrato_strength *= change; } - -void decrease_vibrato_strength(float change) { vibrato_strength /= change; } - -# endif /* VIBRATO_STRENGTH_ENABLE */ - -#endif /* VIBRATO_ENABLE */ - -// Polyphony functions - -void set_polyphony_rate(float rate) { polyphony_rate = rate; } - -void enable_polyphony() { polyphony_rate = 5; } - -void disable_polyphony() { polyphony_rate = 0; } - -void increase_polyphony_rate(float change) { polyphony_rate *= change; } - -void decrease_polyphony_rate(float change) { polyphony_rate /= change; } - -// Timbre function - -void set_timbre(float timbre) { note_timbre = timbre; } - -// Tempo functions - -void set_tempo(uint8_t tempo) { note_tempo = tempo; } - -void decrease_tempo(uint8_t tempo_change) { note_tempo += tempo_change; } - -void increase_tempo(uint8_t tempo_change) { - if (note_tempo - tempo_change < 10) { - note_tempo = 10; - } else { - note_tempo -= tempo_change; - } -} - -//------------------------------------------------------------------------------ -// Override these functions in your keymap file to play different tunes on -// startup and bootloader jump -__attribute__((weak)) void play_startup_tone() {} - -__attribute__((weak)) void play_goodbye_tone() {} -//------------------------------------------------------------------------------ diff --git a/quantum/audio/driver_avr_pwm.h b/quantum/audio/driver_avr_pwm.h new file mode 100644 index 00000000000..d6eb3571dac --- /dev/null +++ b/quantum/audio/driver_avr_pwm.h @@ -0,0 +1,17 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once diff --git a/quantum/audio/driver_avr_pwm_hardware.c b/quantum/audio/driver_avr_pwm_hardware.c new file mode 100644 index 00000000000..492b9bfb043 --- /dev/null +++ b/quantum/audio/driver_avr_pwm_hardware.c @@ -0,0 +1,322 @@ +/* Copyright 2016 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#if defined(__AVR__) +# include +# include +# include +#endif + +#include "audio.h" + +extern bool playing_note; +extern bool playing_melody; +extern uint8_t note_timbre; + +#define CPU_PRESCALER 8 + +/* + Audio Driver: PWM + + drive up to two speakers through the AVR PWM hardware-peripheral, using timer1 and/or timer3 on Atmega32U4. + + the primary channel_1 can be connected to either pin PC4 PC5 or PC6 (the later being used by most AVR based keyboards) with a PMW signal generated by timer3 + and an optional secondary channel_2 on either pin PB5, PB6 or PB7, with a PWM signal from timer1 + + alternatively, the PWM pins on PORTB can be used as only/primary speaker +*/ + +#if defined(AUDIO_PIN) && (AUDIO_PIN != C4) && (AUDIO_PIN != C5) && (AUDIO_PIN != C6) && (AUDIO_PIN != B5) && (AUDIO_PIN != B6) && (AUDIO_PIN != B7) +# error "Audio feature enabled, but no suitable pin selected as AUDIO_PIN - see docs/feature_audio under the AVR settings for available options." +#endif + +#if (AUDIO_PIN == C4) || (AUDIO_PIN == C5) || (AUDIO_PIN == C6) +# define AUDIO1_PIN_SET +# define AUDIO1_TIMSKx TIMSK3 +# define AUDIO1_TCCRxA TCCR3A +# define AUDIO1_TCCRxB TCCR3B +# define AUDIO1_ICRx ICR3 +# define AUDIO1_WGMx0 WGM30 +# define AUDIO1_WGMx1 WGM31 +# define AUDIO1_WGMx2 WGM32 +# define AUDIO1_WGMx3 WGM33 +# define AUDIO1_CSx0 CS30 +# define AUDIO1_CSx1 CS31 +# define AUDIO1_CSx2 CS32 + +# if (AUDIO_PIN == C6) +# define AUDIO1_COMxy0 COM3A0 +# define AUDIO1_COMxy1 COM3A1 +# define AUDIO1_OCIExy OCIE3A +# define AUDIO1_OCRxy OCR3A +# define AUDIO1_PIN C6 +# define AUDIO1_TIMERx_COMPy_vect TIMER3_COMPA_vect +# elif (AUDIO_PIN == C5) +# define AUDIO1_COMxy0 COM3B0 +# define AUDIO1_COMxy1 COM3B1 +# define AUDIO1_OCIExy OCIE3B +# define AUDIO1_OCRxy OCR3B +# define AUDIO1_PIN C5 +# define AUDIO1_TIMERx_COMPy_vect TIMER3_COMPB_vect +# elif (AUDIO_PIN == C4) +# define AUDIO1_COMxy0 COM3C0 +# define AUDIO1_COMxy1 COM3C1 +# define AUDIO1_OCIExy OCIE3C +# define AUDIO1_OCRxy OCR3C +# define AUDIO1_PIN C4 +# define AUDIO1_TIMERx_COMPy_vect TIMER3_COMPC_vect +# endif +#endif + +#if defined(AUDIO_PIN) && defined(AUDIO_PIN_ALT) && (AUDIO_PIN == AUDIO_PIN_ALT) +# error "Audio feature: AUDIO_PIN and AUDIO_PIN_ALT on the same pin makes no sense." +#endif + +#if ((AUDIO_PIN == B5) && ((AUDIO_PIN_ALT == B6) || (AUDIO_PIN_ALT == B7))) || ((AUDIO_PIN == B6) && ((AUDIO_PIN_ALT == B5) || (AUDIO_PIN_ALT == B7))) || ((AUDIO_PIN == B7) && ((AUDIO_PIN_ALT == B5) || (AUDIO_PIN_ALT == B6))) +# error "Audio feature: PORTB as AUDIO_PIN and AUDIO_PIN_ALT at the same time is not supported." +#endif + +#if defined(AUDIO_PIN_ALT) && (AUDIO_PIN_ALT != B5) && (AUDIO_PIN_ALT != B6) && (AUDIO_PIN_ALT != B7) +# error "Audio feature: the pin selected as AUDIO_PIN_ALT is not supported." +#endif + +#if (AUDIO_PIN == B5) || (AUDIO_PIN == B6) || (AUDIO_PIN == B7) || (AUDIO_PIN_ALT == B5) || (AUDIO_PIN_ALT == B6) || (AUDIO_PIN_ALT == B7) +# define AUDIO2_PIN_SET +# define AUDIO2_TIMSKx TIMSK1 +# define AUDIO2_TCCRxA TCCR1A +# define AUDIO2_TCCRxB TCCR1B +# define AUDIO2_ICRx ICR1 +# define AUDIO2_WGMx0 WGM10 +# define AUDIO2_WGMx1 WGM11 +# define AUDIO2_WGMx2 WGM12 +# define AUDIO2_WGMx3 WGM13 +# define AUDIO2_CSx0 CS10 +# define AUDIO2_CSx1 CS11 +# define AUDIO2_CSx2 CS12 + +# if (AUDIO_PIN == B5) || (AUDIO_PIN_ALT == B5) +# define AUDIO2_COMxy0 COM1A0 +# define AUDIO2_COMxy1 COM1A1 +# define AUDIO2_OCIExy OCIE1A +# define AUDIO2_OCRxy OCR1A +# define AUDIO2_PIN B5 +# define AUDIO2_TIMERx_COMPy_vect TIMER1_COMPA_vect +# elif (AUDIO_PIN == B6) || (AUDIO_PIN_ALT == B6) +# define AUDIO2_COMxy0 COM1B0 +# define AUDIO2_COMxy1 COM1B1 +# define AUDIO2_OCIExy OCIE1B +# define AUDIO2_OCRxy OCR1B +# define AUDIO2_PIN B6 +# define AUDIO2_TIMERx_COMPy_vect TIMER1_COMPB_vect +# elif (AUDIO_PIN == B7) || (AUDIO_PIN_ALT == B7) +# define AUDIO2_COMxy0 COM1C0 +# define AUDIO2_COMxy1 COM1C1 +# define AUDIO2_OCIExy OCIE1C +# define AUDIO2_OCRxy OCR1C +# define AUDIO2_PIN B7 +# define AUDIO2_TIMERx_COMPy_vect TIMER1_COMPC_vect +# endif +#endif + +// C6 seems to be the assumed default by many existing keyboard - but sill warn the user +#if !defined(AUDIO1_PIN_SET) && !defined(AUDIO2_PIN_SET) +# pragma message "Audio feature enabled, but no suitable pin selected - see docs/feature_audio under the AVR settings for available options. Don't expect to hear anything... :-)" +// TODO: make this an error - go through the breaking-change-process and change all keyboards to the new define +#endif +// ----------------------------------------------------------------------------- + +#ifdef AUDIO1_PIN_SET +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + if (freq == 0.0f) // a pause/rest is a valid "note" with freq=0 + { + // disable the output, but keep the pwm-ISR going (with the previous + // frequency) so the audio-state keeps getting updated + // Note: setting the duty-cycle 0 is not possible on non-inverting PWM mode - see the AVR data-sheet + AUDIO1_TCCRxA &= ~(_BV(AUDIO1_COMxy1) | _BV(AUDIO1_COMxy0)); + return; + } else { + AUDIO1_TCCRxA |= _BV(AUDIO1_COMxy1); // enable output, PWM mode + } + + channel_1_frequency = freq; + + // set pwm period + AUDIO1_ICRx = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); + // and duty cycle + AUDIO1_OCRxy = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre / 100); +} + +void channel_1_start(void) { + // enable timer-counter ISR + AUDIO1_TIMSKx |= _BV(AUDIO1_OCIExy); + // enable timer-counter output + AUDIO1_TCCRxA |= _BV(AUDIO1_COMxy1); +} + +void channel_1_stop(void) { + // disable timer-counter ISR + AUDIO1_TIMSKx &= ~_BV(AUDIO1_OCIExy); + // disable timer-counter output + AUDIO1_TCCRxA &= ~(_BV(AUDIO1_COMxy1) | _BV(AUDIO1_COMxy0)); +} +#endif + +#ifdef AUDIO2_PIN_SET +static float channel_2_frequency = 0.0f; +void channel_2_set_frequency(float freq) { + if (freq == 0.0f) { + AUDIO2_TCCRxA &= ~(_BV(AUDIO2_COMxy1) | _BV(AUDIO2_COMxy0)); + return; + } else { + AUDIO2_TCCRxA |= _BV(AUDIO2_COMxy1); + } + + channel_2_frequency = freq; + + AUDIO2_ICRx = (uint16_t)(((float)F_CPU) / (freq * CPU_PRESCALER)); + AUDIO2_OCRxy = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre / 100); +} + +float channel_2_get_frequency(void) { return channel_2_frequency; } + +void channel_2_start(void) { + AUDIO2_TIMSKx |= _BV(AUDIO2_OCIExy); + AUDIO2_TCCRxA |= _BV(AUDIO2_COMxy1); +} + +void channel_2_stop(void) { + AUDIO2_TIMSKx &= ~_BV(AUDIO2_OCIExy); + AUDIO2_TCCRxA &= ~(_BV(AUDIO2_COMxy1) | _BV(AUDIO2_COMxy0)); +} +#endif + +void audio_driver_initialize() { +#ifdef AUDIO1_PIN_SET + channel_1_stop(); + setPinOutput(AUDIO1_PIN); +#endif + +#ifdef AUDIO2_PIN_SET + channel_2_stop(); + setPinOutput(AUDIO2_PIN); +#endif + + // TCCR3A / TCCR3B: Timer/Counter #3 Control Registers TCCR3A/TCCR3B, TCCR1A/TCCR1B + // Compare Output Mode (COM3An and COM1An) = 0b00 = Normal port operation + // OC3A -- PC6 + // OC3B -- PC5 + // OC3C -- PC4 + // OC1A -- PB5 + // OC1B -- PB6 + // OC1C -- PB7 + + // Waveform Generation Mode (WGM3n) = 0b1110 = Fast PWM Mode 14. Period = ICR3, Duty Cycle OCR3A) + // OCR3A - PC6 + // OCR3B - PC5 + // OCR3C - PC4 + // OCR1A - PB5 + // OCR1B - PB6 + // OCR1C - PB7 + + // Clock Select (CS3n) = 0b010 = Clock / 8 +#ifdef AUDIO1_PIN_SET + // initialize timer-counter + AUDIO1_TCCRxA = (0 << AUDIO1_COMxy1) | (0 << AUDIO1_COMxy0) | (1 << AUDIO1_WGMx1) | (0 << AUDIO1_WGMx0); + AUDIO1_TCCRxB = (1 << AUDIO1_WGMx3) | (1 << AUDIO1_WGMx2) | (0 << AUDIO1_CSx2) | (1 << AUDIO1_CSx1) | (0 << AUDIO1_CSx0); +#endif + +#ifdef AUDIO2_PIN_SET + AUDIO2_TCCRxA = (0 << AUDIO2_COMxy1) | (0 << AUDIO2_COMxy0) | (1 << AUDIO2_WGMx1) | (0 << AUDIO2_WGMx0); + AUDIO2_TCCRxB = (1 << AUDIO2_WGMx3) | (1 << AUDIO2_WGMx2) | (0 << AUDIO2_CSx2) | (1 << AUDIO2_CSx1) | (0 << AUDIO2_CSx0); +#endif +} + +void audio_driver_stop() { +#ifdef AUDIO1_PIN_SET + channel_1_stop(); +#endif + +#ifdef AUDIO2_PIN_SET + channel_2_stop(); +#endif +} + +void audio_driver_start(void) { +#ifdef AUDIO1_PIN_SET + channel_1_start(); + if (playing_note) { + channel_1_set_frequency(audio_get_processed_frequency(0)); + } +#endif + +#if !defined(AUDIO1_PIN_SET) && defined(AUDIO2_PIN_SET) + channel_2_start(); + if (playing_note) { + channel_2_set_frequency(audio_get_processed_frequency(0)); + } +#endif +} + +static volatile uint32_t isr_counter = 0; +#ifdef AUDIO1_PIN_SET +ISR(AUDIO1_TIMERx_COMPy_vect) { + isr_counter++; + if (isr_counter < channel_1_frequency / (CPU_PRESCALER * 8)) return; + + isr_counter = 0; + bool state_changed = audio_update_state(); + + if (!playing_note && !playing_melody) { + channel_1_stop(); +# ifdef AUDIO2_PIN_SET + channel_2_stop(); +# endif + return; + } + + if (state_changed) { + channel_1_set_frequency(audio_get_processed_frequency(0)); +# ifdef AUDIO2_PIN_SET + if (audio_get_number_of_active_tones() > 1) { + channel_2_set_frequency(audio_get_processed_frequency(1)); + } else { + channel_2_stop(); + } +# endif + } +} +#endif + +#if !defined(AUDIO1_PIN_SET) && defined(AUDIO2_PIN_SET) +ISR(AUDIO2_TIMERx_COMPy_vect) { + isr_counter++; + if (isr_counter < channel_2_frequency / (CPU_PRESCALER * 8)) return; + + isr_counter = 0; + bool state_changed = audio_update_state(); + + if (!playing_note && !playing_melody) { + channel_2_stop(); + return; + } + + if (state_changed) { + channel_2_set_frequency(audio_get_processed_frequency(0)); + } +} +#endif diff --git a/quantum/audio/driver_chibios_dac.h b/quantum/audio/driver_chibios_dac.h new file mode 100644 index 00000000000..07cd622ead2 --- /dev/null +++ b/quantum/audio/driver_chibios_dac.h @@ -0,0 +1,126 @@ +/* Copyright 2019 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef A4 +# define A4 PAL_LINE(GPIOA, 4) +#endif +#ifndef A5 +# define A5 PAL_LINE(GPIOA, 5) +#endif + +/** + * Size of the dac_buffer arrays. All must be the same size. + */ +#define AUDIO_DAC_BUFFER_SIZE 256U + +/** + * Highest value allowed sample value. + + * since the DAC is limited to 12 bit, the absolute max is 0xfff = 4095U; + * lower values adjust the peak-voltage aka volume down. + * adjusting this value has only an effect on a sample-buffer whose values are + * are NOT pregenerated - see square-wave + */ +#ifndef AUDIO_DAC_SAMPLE_MAX +# define AUDIO_DAC_SAMPLE_MAX 4095U +#endif + +#if !defined(AUDIO_DAC_SAMPLE_RATE) && !defined(AUDIO_MAX_SIMULTANEOUS_TONES) && !defined(AUDIO_DAC_QUALITY_VERY_LOW) && !defined(AUDIO_DAC_QUALITY_LOW) && !defined(AUDIO_DAC_QUALITY_HIGH) && !defined(AUDIO_DAC_QUALITY_VERY_HIGH) +# define AUDIO_DAC_QUALITY_SANE_MINIMUM +#endif + +/** + * These presets allow you to quickly switch between quality settings for + * the DAC. The sample rate and maximum number of simultaneous tones roughly + * has an inverse relationship - slightly higher sample rates may be possible. + * + * NOTE: a high sample-rate results in a higher cpu-load, which might lead to + * (audible) discontinuities and/or starve other processes of cpu-time + * (like RGB-led back-lighting, ...) + */ +#ifdef AUDIO_DAC_QUALITY_VERY_LOW +# define AUDIO_DAC_SAMPLE_RATE 11025U +# define AUDIO_MAX_SIMULTANEOUS_TONES 8 +#endif + +#ifdef AUDIO_DAC_QUALITY_LOW +# define AUDIO_DAC_SAMPLE_RATE 22050U +# define AUDIO_MAX_SIMULTANEOUS_TONES 4 +#endif + +#ifdef AUDIO_DAC_QUALITY_HIGH +# define AUDIO_DAC_SAMPLE_RATE 44100U +# define AUDIO_MAX_SIMULTANEOUS_TONES 2 +#endif + +#ifdef AUDIO_DAC_QUALITY_VERY_HIGH +# define AUDIO_DAC_SAMPLE_RATE 88200U +# define AUDIO_MAX_SIMULTANEOUS_TONES 1 +#endif + +#ifdef AUDIO_DAC_QUALITY_SANE_MINIMUM +/* a sane-minimum config: with a trade-off between cpu-load and tone-range + * + * the (currently) highest defined note is NOTE_B8 with 7902Hz; if we now + * aim for an even even multiple of the buffer-size, we end up with: + * ( roundUptoPow2(highest note / AUDIO_DAC_BUFFER_SIZE) * nyquist-rate * AUDIO_DAC_BUFFER_SIZE) + * 7902/256 = 30.867 * 2 * 256 ~= 16384 + * which works out (but the 'scope shows some sampling artifacts with lower harmonics :-P) + */ +# define AUDIO_DAC_SAMPLE_RATE 16384U +# define AUDIO_MAX_SIMULTANEOUS_TONES 8 +#endif + +/** + * Effective bit-rate of the DAC. 44.1khz is the standard for most audio - any + * lower will sacrifice perceptible audio quality. Any higher will limit the + * number of simultaneous tones. In most situations, a tenth (1/10) of the + * sample rate is where notes become unbearable. + */ +#ifndef AUDIO_DAC_SAMPLE_RATE +# define AUDIO_DAC_SAMPLE_RATE 44100U +#endif + +/** + * The number of tones that can be played simultaneously. If too high a value + * is used here, the keyboard will freeze and glitch-out when that many tones + * are being played. + */ +#ifndef AUDIO_MAX_SIMULTANEOUS_TONES +# define AUDIO_MAX_SIMULTANEOUS_TONES 2 +#endif + +/** + * The default value of the DAC when not playing anything. Certain hardware + * setups may require a high (AUDIO_DAC_SAMPLE_MAX) or low (0) value here. + * Since multiple added sine waves tend to oscillate around the midpoint, + * and possibly never/rarely reach either 0 of MAX, 1/2 MAX can be a + * reasonable default value. + */ +#ifndef AUDIO_DAC_OFF_VALUE +# define AUDIO_DAC_OFF_VALUE AUDIO_DAC_SAMPLE_MAX / 2 +#endif + +#if AUDIO_DAC_OFF_VALUE > AUDIO_DAC_SAMPLE_MAX +# error "AUDIO_DAC: OFF_VALUE may not be larger than SAMPLE_MAX" +#endif + +/** + *user overridable sample generation/processing + */ +uint16_t dac_value_generate(void); diff --git a/quantum/audio/driver_chibios_dac_additive.c b/quantum/audio/driver_chibios_dac_additive.c new file mode 100644 index 00000000000..db304adb877 --- /dev/null +++ b/quantum/audio/driver_chibios_dac_additive.c @@ -0,0 +1,335 @@ +/* Copyright 2016-2019 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "audio.h" +#include +#include + +/* + Audio Driver: DAC + + which utilizes the dac unit many STM32 are equipped with, to output a modulated waveform from samples stored in the dac_buffer_* array who are passed to the hardware through DMA + + it is also possible to have a custom sample-LUT by implementing/overriding 'dac_value_generate' + + this driver allows for multiple simultaneous tones to be played through one single channel by doing additive wave-synthesis +*/ + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no suitable pin selected as AUDIO_PIN - see docs/feature_audio under 'ARM (DAC additive)' for available options." +#endif +#if defined(AUDIO_PIN_ALT) && !defined(AUDIO_PIN_ALT_AS_NEGATIVE) +# pragma message "Audio feature: AUDIO_PIN_ALT set, but not AUDIO_PIN_ALT_AS_NEGATIVE - pin will be left unused; audio might still work though." +#endif + +#if !defined(AUDIO_PIN_ALT) +// no ALT pin defined is valid, but the c-ifs below need some value set +# define AUDIO_PIN_ALT PAL_NOLINE +#endif + +#if !defined(AUDIO_DAC_SAMPLE_WAVEFORM_SINE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID) +# define AUDIO_DAC_SAMPLE_WAVEFORM_SINE +#endif + +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_SINE +/* one full sine wave over [0,2*pi], but shifted up one amplitude and left pi/4; for the samples to start at 0 + */ +static const dacsample_t dac_buffer_sine[AUDIO_DAC_BUFFER_SIZE] = { + // 256 values, max 4095 + 0x0, 0x1, 0x2, 0x6, 0xa, 0xf, 0x16, 0x1e, 0x27, 0x32, 0x3d, 0x4a, 0x58, 0x67, 0x78, 0x89, 0x9c, 0xb0, 0xc5, 0xdb, 0xf2, 0x10a, 0x123, 0x13e, 0x159, 0x175, 0x193, 0x1b1, 0x1d1, 0x1f1, 0x212, 0x235, 0x258, 0x27c, 0x2a0, 0x2c6, 0x2ed, 0x314, 0x33c, 0x365, 0x38e, 0x3b8, 0x3e3, 0x40e, 0x43a, 0x467, 0x494, 0x4c2, 0x4f0, 0x51f, 0x54e, 0x57d, 0x5ad, 0x5dd, 0x60e, 0x63f, 0x670, 0x6a1, 0x6d3, 0x705, 0x737, 0x769, 0x79b, 0x7cd, 0x800, 0x832, 0x864, 0x896, 0x8c8, 0x8fa, 0x92c, 0x95e, 0x98f, 0x9c0, 0x9f1, 0xa22, 0xa52, 0xa82, 0xab1, 0xae0, 0xb0f, 0xb3d, 0xb6b, 0xb98, 0xbc5, 0xbf1, 0xc1c, 0xc47, 0xc71, 0xc9a, 0xcc3, 0xceb, 0xd12, 0xd39, 0xd5f, 0xd83, 0xda7, 0xdca, 0xded, 0xe0e, 0xe2e, 0xe4e, 0xe6c, 0xe8a, 0xea6, 0xec1, 0xedc, 0xef5, 0xf0d, 0xf24, 0xf3a, 0xf4f, 0xf63, 0xf76, 0xf87, 0xf98, 0xfa7, 0xfb5, 0xfc2, 0xfcd, 0xfd8, 0xfe1, 0xfe9, 0xff0, 0xff5, 0xff9, 0xffd, 0xffe, + 0xfff, 0xffe, 0xffd, 0xff9, 0xff5, 0xff0, 0xfe9, 0xfe1, 0xfd8, 0xfcd, 0xfc2, 0xfb5, 0xfa7, 0xf98, 0xf87, 0xf76, 0xf63, 0xf4f, 0xf3a, 0xf24, 0xf0d, 0xef5, 0xedc, 0xec1, 0xea6, 0xe8a, 0xe6c, 0xe4e, 0xe2e, 0xe0e, 0xded, 0xdca, 0xda7, 0xd83, 0xd5f, 0xd39, 0xd12, 0xceb, 0xcc3, 0xc9a, 0xc71, 0xc47, 0xc1c, 0xbf1, 0xbc5, 0xb98, 0xb6b, 0xb3d, 0xb0f, 0xae0, 0xab1, 0xa82, 0xa52, 0xa22, 0x9f1, 0x9c0, 0x98f, 0x95e, 0x92c, 0x8fa, 0x8c8, 0x896, 0x864, 0x832, 0x800, 0x7cd, 0x79b, 0x769, 0x737, 0x705, 0x6d3, 0x6a1, 0x670, 0x63f, 0x60e, 0x5dd, 0x5ad, 0x57d, 0x54e, 0x51f, 0x4f0, 0x4c2, 0x494, 0x467, 0x43a, 0x40e, 0x3e3, 0x3b8, 0x38e, 0x365, 0x33c, 0x314, 0x2ed, 0x2c6, 0x2a0, 0x27c, 0x258, 0x235, 0x212, 0x1f1, 0x1d1, 0x1b1, 0x193, 0x175, 0x159, 0x13e, 0x123, 0x10a, 0xf2, 0xdb, 0xc5, 0xb0, 0x9c, 0x89, 0x78, 0x67, 0x58, 0x4a, 0x3d, 0x32, 0x27, 0x1e, 0x16, 0xf, 0xa, 0x6, 0x2, 0x1}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_SINE +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE +static const dacsample_t dac_buffer_triangle[AUDIO_DAC_BUFFER_SIZE] = { + // 256 values, max 4095 + 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0, 0xc0, 0xe0, 0x100, 0x120, 0x140, 0x160, 0x180, 0x1a0, 0x1c0, 0x1e0, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0x3c0, 0x3e0, 0x400, 0x420, 0x440, 0x460, 0x480, 0x4a0, 0x4c0, 0x4e0, 0x500, 0x520, 0x540, 0x560, 0x580, 0x5a0, 0x5c0, 0x5e0, 0x600, 0x620, 0x640, 0x660, 0x680, 0x6a0, 0x6c0, 0x6e0, 0x700, 0x720, 0x740, 0x760, 0x780, 0x7a0, 0x7c0, 0x7e0, 0x800, 0x81f, 0x83f, 0x85f, 0x87f, 0x89f, 0x8bf, 0x8df, 0x8ff, 0x91f, 0x93f, 0x95f, 0x97f, 0x99f, 0x9bf, 0x9df, 0x9ff, 0xa1f, 0xa3f, 0xa5f, 0xa7f, 0xa9f, 0xabf, 0xadf, 0xaff, 0xb1f, 0xb3f, 0xb5f, 0xb7f, 0xb9f, 0xbbf, 0xbdf, 0xbff, 0xc1f, 0xc3f, 0xc5f, 0xc7f, 0xc9f, 0xcbf, 0xcdf, 0xcff, 0xd1f, 0xd3f, 0xd5f, 0xd7f, 0xd9f, 0xdbf, 0xddf, 0xdff, 0xe1f, 0xe3f, 0xe5f, 0xe7f, 0xe9f, 0xebf, 0xedf, 0xeff, 0xf1f, 0xf3f, 0xf5f, 0xf7f, 0xf9f, 0xfbf, 0xfdf, + 0xfff, 0xfdf, 0xfbf, 0xf9f, 0xf7f, 0xf5f, 0xf3f, 0xf1f, 0xeff, 0xedf, 0xebf, 0xe9f, 0xe7f, 0xe5f, 0xe3f, 0xe1f, 0xdff, 0xddf, 0xdbf, 0xd9f, 0xd7f, 0xd5f, 0xd3f, 0xd1f, 0xcff, 0xcdf, 0xcbf, 0xc9f, 0xc7f, 0xc5f, 0xc3f, 0xc1f, 0xbff, 0xbdf, 0xbbf, 0xb9f, 0xb7f, 0xb5f, 0xb3f, 0xb1f, 0xaff, 0xadf, 0xabf, 0xa9f, 0xa7f, 0xa5f, 0xa3f, 0xa1f, 0x9ff, 0x9df, 0x9bf, 0x99f, 0x97f, 0x95f, 0x93f, 0x91f, 0x8ff, 0x8df, 0x8bf, 0x89f, 0x87f, 0x85f, 0x83f, 0x81f, 0x800, 0x7e0, 0x7c0, 0x7a0, 0x780, 0x760, 0x740, 0x720, 0x700, 0x6e0, 0x6c0, 0x6a0, 0x680, 0x660, 0x640, 0x620, 0x600, 0x5e0, 0x5c0, 0x5a0, 0x580, 0x560, 0x540, 0x520, 0x500, 0x4e0, 0x4c0, 0x4a0, 0x480, 0x460, 0x440, 0x420, 0x400, 0x3e0, 0x3c0, 0x3a0, 0x380, 0x360, 0x340, 0x320, 0x300, 0x2e0, 0x2c0, 0x2a0, 0x280, 0x260, 0x240, 0x220, 0x200, 0x1e0, 0x1c0, 0x1a0, 0x180, 0x160, 0x140, 0x120, 0x100, 0xe0, 0xc0, 0xa0, 0x80, 0x60, 0x40, 0x20}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE +static const dacsample_t dac_buffer_square[AUDIO_DAC_BUFFER_SIZE] = { + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = 0, // first and + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = AUDIO_DAC_SAMPLE_MAX, // second half +}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE +/* +// four steps: 0, 1/3, 2/3 and 1 +static const dacsample_t dac_buffer_staircase[AUDIO_DAC_BUFFER_SIZE] = { + [0 ... AUDIO_DAC_BUFFER_SIZE/3 -1 ] = 0, + [AUDIO_DAC_BUFFER_SIZE / 4 ... AUDIO_DAC_BUFFER_SIZE / 2 -1 ] = AUDIO_DAC_SAMPLE_MAX / 3, + [AUDIO_DAC_BUFFER_SIZE / 2 ... 3 * AUDIO_DAC_BUFFER_SIZE / 4 -1 ] = 2 * AUDIO_DAC_SAMPLE_MAX / 3, + [3 * AUDIO_DAC_BUFFER_SIZE / 4 ... AUDIO_DAC_BUFFER_SIZE -1 ] = AUDIO_DAC_SAMPLE_MAX, +} +*/ +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID +static const dacsample_t dac_buffer_trapezoid[AUDIO_DAC_BUFFER_SIZE] = {0x0, 0x1f, 0x7f, 0xdf, 0x13f, 0x19f, 0x1ff, 0x25f, 0x2bf, 0x31f, 0x37f, 0x3df, 0x43f, 0x49f, 0x4ff, 0x55f, 0x5bf, 0x61f, 0x67f, 0x6df, 0x73f, 0x79f, 0x7ff, 0x85f, 0x8bf, 0x91f, 0x97f, 0x9df, 0xa3f, 0xa9f, 0xaff, 0xb5f, 0xbbf, 0xc1f, 0xc7f, 0xcdf, 0xd3f, 0xd9f, 0xdff, 0xe5f, 0xebf, 0xf1f, 0xf7f, 0xfdf, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, + 0xfff, 0xfdf, 0xf7f, 0xf1f, 0xebf, 0xe5f, 0xdff, 0xd9f, 0xd3f, 0xcdf, 0xc7f, 0xc1f, 0xbbf, 0xb5f, 0xaff, 0xa9f, 0xa3f, 0x9df, 0x97f, 0x91f, 0x8bf, 0x85f, 0x7ff, 0x79f, 0x73f, 0x6df, 0x67f, 0x61f, 0x5bf, 0x55f, 0x4ff, 0x49f, 0x43f, 0x3df, 0x37f, 0x31f, 0x2bf, 0x25f, 0x1ff, 0x19f, 0x13f, 0xdf, 0x7f, 0x1f, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID + +static dacsample_t dac_buffer_empty[AUDIO_DAC_BUFFER_SIZE] = {AUDIO_DAC_OFF_VALUE}; + +/* keep track of the sample position for for each frequency */ +static float dac_if[AUDIO_MAX_SIMULTANEOUS_TONES] = {0.0}; + +static float active_tones_snapshot[AUDIO_MAX_SIMULTANEOUS_TONES] = {0, 0}; +static uint8_t active_tones_snapshot_length = 0; + +typedef enum { + OUTPUT_SHOULD_START, + OUTPUT_RUN_NORMALLY, + // path 1: wait for zero, then change/update active tones + OUTPUT_TONES_CHANGED, + OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE, + // path 2: hardware should stop, wait for zero then turn output off = stop the timer + OUTPUT_SHOULD_STOP, + OUTPUT_REACHED_ZERO_BEFORE_OFF, + OUTPUT_OFF, + OUTPUT_OFF_1, + OUTPUT_OFF_2, // trailing off: giving the DAC two more conversion cycles until the AUDIO_DAC_OFF_VALUE reaches the output, then turn the timer off, which leaves the output at that level + number_of_output_states +} output_states_t; +output_states_t state = OUTPUT_OFF_2; + +/** + * Generation of the waveform being passed to the callback. Declared weak so users + * can override it with their own wave-forms/noises. + */ +__attribute__((weak)) uint16_t dac_value_generate(void) { + // DAC is running/asking for values but snapshot length is zero -> must be playing a pause + if (active_tones_snapshot_length == 0) { + return AUDIO_DAC_OFF_VALUE; + } + + /* doing additive wave synthesis over all currently playing tones = adding up + * sine-wave-samples for each frequency, scaled by the number of active tones + */ + uint16_t value = 0; + float frequency = 0.0f; + + for (uint8_t i = 0; i < active_tones_snapshot_length; i++) { + /* Note: a user implementation does not have to rely on the active_tones_snapshot, but + * could directly query the active frequencies through audio_get_processed_frequency */ + frequency = active_tones_snapshot[i]; + + dac_if[i] = dac_if[i] + ((frequency * AUDIO_DAC_BUFFER_SIZE) / AUDIO_DAC_SAMPLE_RATE) * 2 / 3; + /*Note: the 2/3 are necessary to get the correct frequencies on the + * DAC output (as measured with an oscilloscope), since the gpt + * timer runs with 3*AUDIO_DAC_SAMPLE_RATE; and the DAC callback + * is called twice per conversion.*/ + + dac_if[i] = fmod(dac_if[i], AUDIO_DAC_BUFFER_SIZE); + + // Wavetable generation/lookup + uint16_t dac_i = (uint16_t)dac_if[i]; + +#if defined(AUDIO_DAC_SAMPLE_WAVEFORM_SINE) + value += dac_buffer_sine[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE) + value += dac_buffer_triangle[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID) + value += dac_buffer_trapezoid[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE) + value += dac_buffer_square[dac_i] / active_tones_snapshot_length; +#endif + /* + // SINE + value += dac_buffer_sine[dac_i] / active_tones_snapshot_length / 3; + // TRIANGLE + value += dac_buffer_triangle[dac_i] / active_tones_snapshot_length / 3; + // SQUARE + value += dac_buffer_square[dac_i] / active_tones_snapshot_length / 3; + //NOTE: combination of these three wave-forms is more exemplary - and doesn't sound particularly good :-P + */ + + // STAIRS (mostly usefully as test-pattern) + // value_avg = dac_buffer_staircase[dac_i] / active_tones_snapshot_length; + } + + return value; +} + +/** + * DAC streaming callback. Does all of the main computing for playing songs. + * + * Note: chibios calls this CB twice: during the 'half buffer event', and the 'full buffer event'. + */ +static void dac_end(DACDriver *dacp) { + dacsample_t *sample_p = (dacp)->samples; + + // work on the other half of the buffer + if (dacIsBufferComplete(dacp)) { + sample_p += AUDIO_DAC_BUFFER_SIZE / 2; // 'half_index' + } + + for (uint8_t s = 0; s < AUDIO_DAC_BUFFER_SIZE / 2; s++) { + if (OUTPUT_OFF <= state) { + sample_p[s] = AUDIO_DAC_OFF_VALUE; + continue; + } else { + sample_p[s] = dac_value_generate(); + } + + /* zero crossing (or approach, whereas zero == DAC_OFF_VALUE, which can be configured to anything from 0 to DAC_SAMPLE_MAX) + * ============================*=*========================== AUDIO_DAC_SAMPLE_MAX + * * * + * * * + * --------------------------------------------------------- + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- AUDIO_DAC_OFF_VALUE + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- + * * + * * * + * * * + * =====*=*================================================= 0x0 + */ + if (((sample_p[s] + (AUDIO_DAC_SAMPLE_MAX / 100)) > AUDIO_DAC_OFF_VALUE) && // value approaches from below + (sample_p[s] < (AUDIO_DAC_OFF_VALUE + (AUDIO_DAC_SAMPLE_MAX / 100))) // or above + ) { + if ((OUTPUT_SHOULD_START == state) && (active_tones_snapshot_length > 0)) { + state = OUTPUT_RUN_NORMALLY; + } else if (OUTPUT_TONES_CHANGED == state) { + state = OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE; + } else if (OUTPUT_SHOULD_STOP == state) { + state = OUTPUT_REACHED_ZERO_BEFORE_OFF; + } + } + + // still 'ramping up', reset the output to OFF_VALUE until the generated values reach that value, to do a smooth handover + if (OUTPUT_SHOULD_START == state) { + sample_p[s] = AUDIO_DAC_OFF_VALUE; + } + + if ((OUTPUT_SHOULD_START == state) || (OUTPUT_REACHED_ZERO_BEFORE_OFF == state) || (OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE == state)) { + uint8_t active_tones = MIN(AUDIO_MAX_SIMULTANEOUS_TONES, audio_get_number_of_active_tones()); + active_tones_snapshot_length = 0; + // update the snapshot - once, and only on occasion that something changed; + // -> saves cpu cycles (?) + for (uint8_t i = 0; i < active_tones; i++) { + float freq = audio_get_processed_frequency(i); + if (freq > 0) { // disregard 'rest' notes, with valid frequency 0.0f; which would only lower the resulting waveform volume during the additive synthesis step + active_tones_snapshot[active_tones_snapshot_length++] = freq; + } + } + + if ((0 == active_tones_snapshot_length) && (OUTPUT_REACHED_ZERO_BEFORE_OFF == state)) { + state = OUTPUT_OFF; + } + if (OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE == state) { + state = OUTPUT_RUN_NORMALLY; + } + } + } + + // update audio internal state (note position, current_note, ...) + if (audio_update_state()) { + if (OUTPUT_SHOULD_STOP != state) { + state = OUTPUT_TONES_CHANGED; + } + } + + if (OUTPUT_OFF <= state) { + if (OUTPUT_OFF_2 == state) { + // stopping timer6 = stopping the DAC at whatever value it is currently pushing to the output = AUDIO_DAC_OFF_VALUE + gptStopTimer(&GPTD6); + } else { + state++; + } + } +} + +static void dac_error(DACDriver *dacp, dacerror_t err) { + (void)dacp; + (void)err; + + chSysHalt("DAC failure. halp"); +} + +static const GPTConfig gpt6cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE * 3, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static const DACConfig dac_conf = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; + +/** + * @note The DAC_TRG(0) here selects the Timer 6 TRGO event, which is triggered + * on the rising edge after 3 APB1 clock cycles, causing our gpt6cfg1.frequency + * to be a third of what we expect. + * + * Here are all the values for DAC_TRG (TSEL in the ref manual) + * TIM15_TRGO 0b011 + * TIM2_TRGO 0b100 + * TIM3_TRGO 0b001 + * TIM6_TRGO 0b000 + * TIM7_TRGO 0b010 + * EXTI9 0b110 + * SWTRIG 0b111 + */ +static const DACConversionGroup dac_conv_cfg = {.num_channels = 1U, .end_cb = dac_end, .error_cb = dac_error, .trigger = DAC_TRG(0b000)}; + +void audio_driver_initialize() { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + palSetLineMode(A4, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD1, &dac_conf); + } + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + palSetLineMode(A5, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD2, &dac_conf); + } + + /* enable the output buffer, to directly drive external loads with no additional circuitry + * + * see: AN4566 Application note: Extending the DAC performance of STM32 microcontrollers + * Note: Buffer-Off bit -> has to be set 0 to enable the output buffer + * Note: enabling the output buffer imparts an additional dc-offset of a couple mV + * + * this is done here, reaching directly into the stm32 registers since chibios has not implemented BOFF handling yet + * (see: chibios/os/hal/ports/STM32/todo.txt '- BOFF handling in DACv1.' + */ + DACD1.params->dac->CR &= ~DAC_CR_BOFF1; + DACD2.params->dac->CR &= ~DAC_CR_BOFF2; + + if (AUDIO_PIN == A4) { + dacStartConversion(&DACD1, &dac_conv_cfg, dac_buffer_empty, AUDIO_DAC_BUFFER_SIZE); + } else if (AUDIO_PIN == A5) { + dacStartConversion(&DACD2, &dac_conv_cfg, dac_buffer_empty, AUDIO_DAC_BUFFER_SIZE); + } + + // no inverted/out-of-phase waveform (yet?), only pulling AUDIO_PIN_ALT to AUDIO_DAC_OFF_VALUE +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) + if (AUDIO_PIN_ALT == A4) { + dacPutChannelX(&DACD1, 0, AUDIO_DAC_OFF_VALUE); + } else if (AUDIO_PIN_ALT == A5) { + dacPutChannelX(&DACD2, 0, AUDIO_DAC_OFF_VALUE); + } +#endif + + gptStart(&GPTD6, &gpt6cfg1); +} + +void audio_driver_stop(void) { state = OUTPUT_SHOULD_STOP; } + +void audio_driver_start(void) { + gptStartContinuous(&GPTD6, 2U); + + for (uint8_t i = 0; i < AUDIO_MAX_SIMULTANEOUS_TONES; i++) { + dac_if[i] = 0.0f; + active_tones_snapshot[i] = 0.0f; + } + active_tones_snapshot_length = 0; + state = OUTPUT_SHOULD_START; +} diff --git a/quantum/audio/driver_chibios_dac_basic.c b/quantum/audio/driver_chibios_dac_basic.c new file mode 100644 index 00000000000..9a1c9a8c19c --- /dev/null +++ b/quantum/audio/driver_chibios_dac_basic.c @@ -0,0 +1,245 @@ +/* Copyright 2016-2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "audio.h" +#include "ch.h" +#include "hal.h" + +/* + Audio Driver: DAC + + which utilizes both channels of the DAC unit many STM32 are equipped with to output a modulated square-wave, from precomputed samples stored in a buffer, which is passed to the hardware through DMA + + this driver can either be used to drive to separate speakers, wired to A4+Gnd and A5+Gnd, which allows two tones to be played simultaneously + OR + one speaker wired to A4+A5 with the AUDIO_PIN_ALT_AS_NEGATIVE define set - see docs/feature_audio + +*/ + +#if !defined(AUDIO_PIN) +# pragma message "Audio feature enabled, but no suitable pin selected as AUDIO_PIN - see docs/feature_audio under 'ARM (DAC basic)' for available options." +// TODO: make this an 'error' instead; go through a breaking change, and add AUDIO_PIN A5 to all keyboards currently using AUDIO on STM32 based boards? - for now: set the define here +# define AUDIO_PIN A5 +#endif +// check configuration for ONE speaker, connected to both DAC pins +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) && !defined(AUDIO_PIN_ALT) +# error "Audio feature: AUDIO_PIN_ALT_AS_NEGATIVE set, but no pin configured as AUDIO_PIN_ALT" +#endif + +#ifndef AUDIO_PIN_ALT +// no ALT pin defined is valid, but the c-ifs below need some value set +# define AUDIO_PIN_ALT -1 +#endif + +#if !defined(AUDIO_STATE_TIMER) +# define AUDIO_STATE_TIMER GPTD8 +#endif + +// square-wave +static const dacsample_t dac_buffer_1[AUDIO_DAC_BUFFER_SIZE] = { + // First half is max, second half is 0 + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = AUDIO_DAC_SAMPLE_MAX, + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = 0, +}; + +// square-wave +static const dacsample_t dac_buffer_2[AUDIO_DAC_BUFFER_SIZE] = { + // opposite of dac_buffer above + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = 0, + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = AUDIO_DAC_SAMPLE_MAX, +}; + +GPTConfig gpt6cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; +GPTConfig gpt7cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static void gpt_audio_state_cb(GPTDriver *gptp); +GPTConfig gptStateUpdateCfg = {.frequency = 10, + .callback = gpt_audio_state_cb, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static const DACConfig dac_conf_ch1 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; +static const DACConfig dac_conf_ch2 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; + +/** + * @note The DAC_TRG(0) here selects the Timer 6 TRGO event, which is triggered + * on the rising edge after 3 APB1 clock cycles, causing our gpt6cfg1.frequency + * to be a third of what we expect. + * + * Here are all the values for DAC_TRG (TSEL in the ref manual) + * TIM15_TRGO 0b011 + * TIM2_TRGO 0b100 + * TIM3_TRGO 0b001 + * TIM6_TRGO 0b000 + * TIM7_TRGO 0b010 + * EXTI9 0b110 + * SWTRIG 0b111 + */ +static const DACConversionGroup dac_conv_grp_ch1 = {.num_channels = 1U, .trigger = DAC_TRG(0b000)}; +static const DACConversionGroup dac_conv_grp_ch2 = {.num_channels = 1U, .trigger = DAC_TRG(0b010)}; + +void channel_1_start(void) { + gptStart(&GPTD6, &gpt6cfg1); + gptStartContinuous(&GPTD6, 2U); + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); +} + +void channel_1_stop(void) { + gptStopTimer(&GPTD6); + palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOA, 4); +} + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + channel_1_stop(); + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + gpt6cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE; + channel_1_start(); +} +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_2_start(void) { + gptStart(&GPTD7, &gpt7cfg1); + gptStartContinuous(&GPTD7, 2U); + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); +} + +void channel_2_stop(void) { + gptStopTimer(&GPTD7); + palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); \ + palSetPad(GPIOA, 5); +} + +static float channel_2_frequency = 0.0f; +void channel_2_set_frequency(float freq) { + channel_2_frequency = freq; + + channel_2_stop(); + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + gpt7cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE; + channel_2_start(); +} +float channel_2_get_frequency(void) { return channel_2_frequency; } + +static void gpt_audio_state_cb(GPTDriver *gptp) { + if (audio_update_state()) { +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) + // one piezo/speaker connected to both audio pins, the generated square-waves are inverted + channel_1_set_frequency(audio_get_processed_frequency(0)); + channel_2_set_frequency(audio_get_processed_frequency(0)); + +#else // two separate audio outputs/speakers + // primary speaker on A4, optional secondary on A5 + if (AUDIO_PIN == A4) { + channel_1_set_frequency(audio_get_processed_frequency(0)); + if (AUDIO_PIN_ALT == A5) { + if (audio_get_number_of_active_tones() > 1) { + channel_2_set_frequency(audio_get_processed_frequency(1)); + } else { + channel_2_stop(); + } + } + } + + // primary speaker on A5, optional secondary on A4 + if (AUDIO_PIN == A5) { + channel_2_set_frequency(audio_get_processed_frequency(0)); + if (AUDIO_PIN_ALT == A4) { + if (audio_get_number_of_active_tones() > 1) { + channel_1_set_frequency(audio_get_processed_frequency(1)); + } else { + channel_1_stop(); + } + } + } +#endif + } +} + +void audio_driver_initialize() { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD1, &dac_conf_ch1); + + // initial setup of the dac-triggering timer is still required, even + // though it gets reconfigured and restarted later on + gptStart(&GPTD6, &gpt6cfg1); + } + + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD2, &dac_conf_ch2); + + gptStart(&GPTD7, &gpt7cfg1); + } + + /* enable the output buffer, to directly drive external loads with no additional circuitry + * + * see: AN4566 Application note: Extending the DAC performance of STM32 microcontrollers + * Note: Buffer-Off bit -> has to be set 0 to enable the output buffer + * Note: enabling the output buffer imparts an additional dc-offset of a couple mV + * + * this is done here, reaching directly into the stm32 registers since chibios has not implemented BOFF handling yet + * (see: chibios/os/hal/ports/STM32/todo.txt '- BOFF handling in DACv1.' + */ + DACD1.params->dac->CR &= ~DAC_CR_BOFF1; + DACD2.params->dac->CR &= ~DAC_CR_BOFF2; + + // start state-updater + gptStart(&AUDIO_STATE_TIMER, &gptStateUpdateCfg); +} + +void audio_driver_stop(void) { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + gptStopTimer(&GPTD6); + + // stop the ongoing conversion and put the output in a known state + dacStopConversion(&DACD1); + dacPutChannelX(&DACD1, 0, AUDIO_DAC_OFF_VALUE); + } + + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + gptStopTimer(&GPTD7); + + dacStopConversion(&DACD2); + dacPutChannelX(&DACD2, 0, AUDIO_DAC_OFF_VALUE); + } + gptStopTimer(&AUDIO_STATE_TIMER); +} + +void audio_driver_start(void) { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + dacStartConversion(&DACD1, &dac_conv_grp_ch1, (dacsample_t *)dac_buffer_1, AUDIO_DAC_BUFFER_SIZE); + } + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + dacStartConversion(&DACD2, &dac_conv_grp_ch2, (dacsample_t *)dac_buffer_2, AUDIO_DAC_BUFFER_SIZE); + } + gptStartContinuous(&AUDIO_STATE_TIMER, 2U); +} diff --git a/quantum/audio/driver_chibios_pwm.h b/quantum/audio/driver_chibios_pwm.h new file mode 100644 index 00000000000..86cab916e1e --- /dev/null +++ b/quantum/audio/driver_chibios_pwm.h @@ -0,0 +1,40 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#if !defined(AUDIO_PWM_DRIVER) +// NOTE: Timer2 seems to be used otherwise in QMK, otherwise we could default to A5 (= TIM2_CH1, with PWMD2 and alternate-function(1)) +# define AUDIO_PWM_DRIVER PWMD1 +#endif + +#if !defined(AUDIO_PWM_CHANNEL) +// NOTE: sticking to the STM data-sheet numbering: TIMxCH1 to TIMxCH4 +// default: STM32F303CC PA8+TIM1_CH1 -> 1 +# define AUDIO_PWM_CHANNEL 1 +#endif + +#if !defined(AUDIO_PWM_PAL_MODE) +// pin-alternate function: see the data-sheet for which pin needs what AF to connect to TIMx_CHy +// default: STM32F303CC PA8+TIM1_CH1 -> 6 +# define AUDIO_PWM_PAL_MODE 6 +#endif + +#if !defined(AUDIO_STATE_TIMER) +// timer used to trigger updates in the audio-system, configured/enabled in chibios mcuconf. +// Tim6 is the default for "larger" STMs, smaller ones might not have this one (enabled) and need to switch to a different one (e.g.: STM32F103 has only Tim1-Tim4) +# define AUDIO_STATE_TIMER GPTD6 +#endif diff --git a/quantum/audio/driver_chibios_pwm_hardware.c b/quantum/audio/driver_chibios_pwm_hardware.c new file mode 100644 index 00000000000..3c7d89b290b --- /dev/null +++ b/quantum/audio/driver_chibios_pwm_hardware.c @@ -0,0 +1,144 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* +Audio Driver: PWM + +the duty-cycle is always kept at 50%, and the pwm-period is adjusted to match the frequency of a note to be played back. + +this driver uses the chibios-PWM system to produce a square-wave on specific output pins that are connected to the PWM hardware. +The hardware directly toggles the pin via its alternate function. see your MCUs data-sheet for which pin can be driven by what timer - looking for TIMx_CHy and the corresponding alternate function. + + */ + +#include "audio.h" +#include "ch.h" +#include "hal.h" + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no pin selected - see docs/feature_audio under the ARM PWM settings" +#endif + +extern bool playing_note; +extern bool playing_melody; +extern uint8_t note_timbre; + +static PWMConfig pwmCFG = { + .frequency = 100000, /* PWM clock frequency */ + // CHIBIOS-BUG? can't set the initial period to <2, or the pwm (hard or software) takes ~130ms with .frequency=500000 for a pwmChangePeriod to take effect; with no output=silence in the meantime + .period = 2, /* initial PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + .callback = NULL, /* no callback, the hardware directly toggles the pin */ + .channels = + { +#if AUDIO_PWM_CHANNEL == 4 + {PWM_OUTPUT_DISABLED, NULL}, /* channel 0 -> TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 1 -> TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 2 -> TIMx_CH3 */ + {PWM_OUTPUT_ACTIVE_HIGH, NULL} /* channel 3 -> TIMx_CH4 */ +#elif AUDIO_PWM_CHANNEL == 3 + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH3 */ + {PWM_OUTPUT_DISABLED, NULL} +#elif AUDIO_PWM_CHANNEL == 2 + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} +#else /*fallback to CH1 */ + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} +#endif + }, +}; + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + pwmcnt_t period = (pwmCFG.frequency / freq); + pwmChangePeriod(&AUDIO_PWM_DRIVER, period); + pwmEnableChannel(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1, + // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH + PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100)); +} + +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_1_start(void) { + pwmStop(&AUDIO_PWM_DRIVER); + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); +} + +void channel_1_stop(void) { pwmStop(&AUDIO_PWM_DRIVER); } + +static void gpt_callback(GPTDriver *gptp); +GPTConfig gptCFG = { + /* a whole note is one beat, which is - per definition in musical_notes.h - set to 64 + the longest note is BREAVE_DOT=128+64=192, the shortest SIXTEENTH=4 + the tempo (which might vary!) is in bpm (beats per minute) + therefore: if the timer ticks away at .frequency = (60*64)Hz, + and the .interval counts from 64 downwards - audio_update_state is + called just often enough to not miss any notes + */ + .frequency = 60 * 64, + .callback = gpt_callback, +}; + +void audio_driver_initialize(void) { + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + // connect the AUDIO_PIN to the PWM hardware +#if defined(USE_GPIOV1) // STM32F103C8 + palSetLineMode(AUDIO_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); +#else // GPIOv2 (or GPIOv3 for f4xx, which is the same/compatible at this command) + palSetLineMode(AUDIO_PIN, PAL_STM32_MODE_ALTERNATE | PAL_STM32_ALTERNATE(AUDIO_PWM_PAL_MODE)); +#endif + + gptStart(&AUDIO_STATE_TIMER, &gptCFG); +} + +void audio_driver_start(void) { + channel_1_stop(); + channel_1_start(); + + if (playing_note || playing_melody) { + gptStartContinuous(&AUDIO_STATE_TIMER, 64); + } +} + +void audio_driver_stop(void) { + channel_1_stop(); + gptStopTimer(&AUDIO_STATE_TIMER); +} + +/* a regular timer task, that checks the note to be currently played + * and updates the pwm to output that frequency + */ +static void gpt_callback(GPTDriver *gptp) { + float freq; // TODO: freq_alt + + if (audio_update_state()) { + freq = audio_get_processed_frequency(0); // freq_alt would be index=1 + channel_1_set_frequency(freq); + } +} diff --git a/quantum/audio/driver_chibios_pwm_software.c b/quantum/audio/driver_chibios_pwm_software.c new file mode 100644 index 00000000000..15c3e98b6a9 --- /dev/null +++ b/quantum/audio/driver_chibios_pwm_software.c @@ -0,0 +1,164 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* +Audio Driver: PWM + +the duty-cycle is always kept at 50%, and the pwm-period is adjusted to match the frequency of a note to be played back. + +this driver uses the chibios-PWM system to produce a square-wave on any given output pin in software +- a pwm callback is used to set/clear the configured pin. + + */ +#include "audio.h" +#include "ch.h" +#include "hal.h" + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no pin selected - see docs/feature_audio under the ARM PWM settings" +#endif +extern bool playing_note; +extern bool playing_melody; +extern uint8_t note_timbre; + +static void pwm_audio_period_callback(PWMDriver *pwmp); +static void pwm_audio_channel_interrupt_callback(PWMDriver *pwmp); + +static PWMConfig pwmCFG = { + .frequency = 100000, /* PWM clock frequency */ + // CHIBIOS-BUG? can't set the initial period to <2, or the pwm (hard or software) takes ~130ms with .frequency=500000 for a pwmChangePeriod to take effect; with no output=silence in the meantime + .period = 2, /* initial PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + .callback = pwm_audio_period_callback, + .channels = + { + // software-PWM just needs another callback on any channel + {PWM_OUTPUT_ACTIVE_HIGH, pwm_audio_channel_interrupt_callback}, /* channel 0 -> TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 1 -> TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 2 -> TIMx_CH3 */ + {PWM_OUTPUT_DISABLED, NULL} /* channel 3 -> TIMx_CH4 */ + }, +}; + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + pwmcnt_t period = (pwmCFG.frequency / freq); + pwmChangePeriod(&AUDIO_PWM_DRIVER, period); + + pwmEnableChannel(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1, + // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH + PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100)); +} + +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_1_start(void) { + pwmStop(&AUDIO_PWM_DRIVER); + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + pwmEnablePeriodicNotification(&AUDIO_PWM_DRIVER); + pwmEnableChannelNotification(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1); +} + +void channel_1_stop(void) { + pwmStop(&AUDIO_PWM_DRIVER); + + palClearLine(AUDIO_PIN); // leave the line low, after last note was played + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palClearLine(AUDIO_PIN_ALT); // leave the line low, after last note was played +#endif +} + +// generate a PWM signal on any pin, not necessarily the one connected to the timer +static void pwm_audio_period_callback(PWMDriver *pwmp) { + (void)pwmp; + palClearLine(AUDIO_PIN); + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palSetLine(AUDIO_PIN_ALT); +#endif +} +static void pwm_audio_channel_interrupt_callback(PWMDriver *pwmp) { + (void)pwmp; + if (channel_1_frequency > 0) { + palSetLine(AUDIO_PIN); // generate a PWM signal on any pin, not necessarily the one connected to the timer +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palClearLine(AUDIO_PIN_ALT); +#endif + } +} + +static void gpt_callback(GPTDriver *gptp); +GPTConfig gptCFG = { + /* a whole note is one beat, which is - per definition in musical_notes.h - set to 64 + the longest note is BREAVE_DOT=128+64=192, the shortest SIXTEENTH=4 + the tempo (which might vary!) is in bpm (beats per minute) + therefore: if the timer ticks away at .frequency = (60*64)Hz, + and the .interval counts from 64 downwards - audio_update_state is + called just often enough to not miss anything + */ + .frequency = 60 * 64, + .callback = gpt_callback, +}; + +void audio_driver_initialize(void) { + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + palSetLineMode(AUDIO_PIN, PAL_MODE_OUTPUT_PUSHPULL); + palClearLine(AUDIO_PIN); + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palSetLineMode(AUDIO_PIN_ALT, PAL_MODE_OUTPUT_PUSHPULL); + palClearLine(AUDIO_PIN_ALT); +#endif + + pwmEnablePeriodicNotification(&AUDIO_PWM_DRIVER); // enable pwm callbacks + pwmEnableChannelNotification(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1); + + gptStart(&AUDIO_STATE_TIMER, &gptCFG); +} + +void audio_driver_start(void) { + channel_1_stop(); + channel_1_start(); + + if (playing_note || playing_melody) { + gptStartContinuous(&AUDIO_STATE_TIMER, 64); + } +} + +void audio_driver_stop(void) { + channel_1_stop(); + gptStopTimer(&AUDIO_STATE_TIMER); +} + +/* a regular timer task, that checks the note to be currently played + * and updates the pwm to output that frequency + */ +static void gpt_callback(GPTDriver *gptp) { + float freq; // TODO: freq_alt + + if (audio_update_state()) { + freq = audio_get_processed_frequency(0); // freq_alt would be index=1 + channel_1_set_frequency(freq); + } +} diff --git a/quantum/audio/musical_notes.h b/quantum/audio/musical_notes.h index 0ba572c346d..ddd7d374f57 100644 --- a/quantum/audio/musical_notes.h +++ b/quantum/audio/musical_notes.h @@ -1,4 +1,5 @@ /* Copyright 2016 Jack Humbert + * Copyright 2020 JohSchneider * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,12 +14,11 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #pragma once -// Tempo Placeholder #ifndef TEMPO_DEFAULT -# define TEMPO_DEFAULT 100 +# define TEMPO_DEFAULT 120 +// in beats-per-minute #endif #define SONG(notes...) \ @@ -27,12 +27,14 @@ // Note Types #define MUSICAL_NOTE(note, duration) \ { (NOTE##note), duration } + #define BREVE_NOTE(note) MUSICAL_NOTE(note, 128) #define WHOLE_NOTE(note) MUSICAL_NOTE(note, 64) #define HALF_NOTE(note) MUSICAL_NOTE(note, 32) #define QUARTER_NOTE(note) MUSICAL_NOTE(note, 16) #define EIGHTH_NOTE(note) MUSICAL_NOTE(note, 8) #define SIXTEENTH_NOTE(note) MUSICAL_NOTE(note, 4) +#define THIRTYSECOND_NOTE(note) MUSICAL_NOTE(note, 2) #define BREVE_DOT_NOTE(note) MUSICAL_NOTE(note, 128 + 64) #define WHOLE_DOT_NOTE(note) MUSICAL_NOTE(note, 64 + 32) @@ -40,6 +42,9 @@ #define QUARTER_DOT_NOTE(note) MUSICAL_NOTE(note, 16 + 8) #define EIGHTH_DOT_NOTE(note) MUSICAL_NOTE(note, 8 + 4) #define SIXTEENTH_DOT_NOTE(note) MUSICAL_NOTE(note, 4 + 2) +#define THIRTYSECOND_DOT_NOTE(note) MUSICAL_NOTE(note, 2 + 1) +// duration of 64 units == one beat == one whole note +// with a tempo of 60bpm this comes to a length of one second // Note Type Shortcuts #define M__NOTE(note, duration) MUSICAL_NOTE(note, duration) @@ -49,56 +54,52 @@ #define Q__NOTE(n) QUARTER_NOTE(n) #define E__NOTE(n) EIGHTH_NOTE(n) #define S__NOTE(n) SIXTEENTH_NOTE(n) +#define T__NOTE(n) THIRTYSECOND_NOTE(n) #define BD_NOTE(n) BREVE_DOT_NOTE(n) #define WD_NOTE(n) WHOLE_DOT_NOTE(n) #define HD_NOTE(n) HALF_DOT_NOTE(n) #define QD_NOTE(n) QUARTER_DOT_NOTE(n) #define ED_NOTE(n) EIGHTH_DOT_NOTE(n) #define SD_NOTE(n) SIXTEENTH_DOT_NOTE(n) +#define TD_NOTE(n) THIRTYSECOND_DOT_NOTE(n) // Note Timbre // Changes how the notes sound -#define TIMBRE_12 0.125f -#define TIMBRE_25 0.250f -#define TIMBRE_50 0.500f -#define TIMBRE_75 0.750f +#define TIMBRE_12 12 +#define TIMBRE_25 25 +#define TIMBRE_50 50 +#define TIMBRE_75 75 #ifndef TIMBRE_DEFAULT # define TIMBRE_DEFAULT TIMBRE_50 #endif + // Notes - # = Octave -#ifdef __arm__ -# define NOTE_REST 1.00f -#else -# define NOTE_REST 0.00f -#endif - -/* These notes are currently bugged -#define NOTE_C0 16.35f -#define NOTE_CS0 17.32f -#define NOTE_D0 18.35f -#define NOTE_DS0 19.45f -#define NOTE_E0 20.60f -#define NOTE_F0 21.83f -#define NOTE_FS0 23.12f -#define NOTE_G0 24.50f -#define NOTE_GS0 25.96f -#define NOTE_A0 27.50f -#define NOTE_AS0 29.14f -#define NOTE_B0 30.87f -#define NOTE_C1 32.70f -#define NOTE_CS1 34.65f -#define NOTE_D1 36.71f -#define NOTE_DS1 38.89f -#define NOTE_E1 41.20f -#define NOTE_F1 43.65f -#define NOTE_FS1 46.25f -#define NOTE_G1 49.00f -#define NOTE_GS1 51.91f -#define NOTE_A1 55.00f -#define NOTE_AS1 58.27f -*/ +#define NOTE_REST 0.00f +#define NOTE_C0 16.35f +#define NOTE_CS0 17.32f +#define NOTE_D0 18.35f +#define NOTE_DS0 19.45f +#define NOTE_E0 20.60f +#define NOTE_F0 21.83f +#define NOTE_FS0 23.12f +#define NOTE_G0 24.50f +#define NOTE_GS0 25.96f +#define NOTE_A0 27.50f +#define NOTE_AS0 29.14f +#define NOTE_B0 30.87f +#define NOTE_C1 32.70f +#define NOTE_CS1 34.65f +#define NOTE_D1 36.71f +#define NOTE_DS1 38.89f +#define NOTE_E1 41.20f +#define NOTE_F1 43.65f +#define NOTE_FS1 46.25f +#define NOTE_G1 49.00f +#define NOTE_GS1 51.91f +#define NOTE_A1 55.00f +#define NOTE_AS1 58.27f #define NOTE_B1 61.74f #define NOTE_C2 65.41f #define NOTE_CS2 69.30f diff --git a/quantum/audio/voices.c b/quantum/audio/voices.c index 1592618be43..8988d827e9b 100644 --- a/quantum/audio/voices.c +++ b/quantum/audio/voices.c @@ -1,4 +1,5 @@ /* Copyright 2016 Jack Humbert + * Copyright 2020 JohSchneider * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,13 +18,19 @@ #include "audio.h" #include -// these are imported from audio.c -extern uint16_t envelope_index; -extern float note_timbre; -extern float polyphony_rate; -extern bool glissando; +uint8_t note_timbre = TIMBRE_DEFAULT; +bool glissando = false; +bool vibrato = false; +float vibrato_strength = 0.5; +float vibrato_rate = 0.125; +uint16_t voices_timer = 0; + +#ifdef AUDIO_VOICE_DEFAULT +voice_type voice = AUDIO_VOICE_DEFAULT; +#else voice_type voice = default_voice; +#endif void set_voice(voice_type v) { voice = v; } @@ -31,22 +38,54 @@ void voice_iterate() { voice = (voice + 1) % number_of_voices; } void voice_deiterate() { voice = (voice - 1 + number_of_voices) % number_of_voices; } +#ifdef AUDIO_VOICES +float mod(float a, int b) { + float r = fmod(a, b); + return r < 0 ? r + b : r; +} + +// Effect: 'vibrate' a given target frequency slightly above/below its initial value +float voice_add_vibrato(float average_freq) { + float vibrato_counter = mod(timer_read() / (100 * vibrato_rate), VIBRATO_LUT_LENGTH); + + return average_freq * pow(vibrato_lut[(int)vibrato_counter], vibrato_strength); +} + +// Effect: 'slides' the 'frequency' from the starting-point, to the target frequency +float voice_add_glissando(float from_freq, float to_freq) { + if (to_freq != 0 && from_freq < to_freq && from_freq < to_freq * pow(2, -440 / to_freq / 12 / 2)) { + return from_freq * pow(2, 440 / from_freq / 12 / 2); + } else if (to_freq != 0 && from_freq > to_freq && from_freq > to_freq * pow(2, 440 / to_freq / 12 / 2)) { + return from_freq * pow(2, -440 / from_freq / 12 / 2); + } else { + return to_freq; + } +} +#endif + float voice_envelope(float frequency) { // envelope_index ranges from 0 to 0xFFFF, which is preserved at 880.0 Hz - __attribute__((unused)) uint16_t compensated_index = (uint16_t)((float)envelope_index * (880.0 / frequency)); +// __attribute__((unused)) uint16_t compensated_index = (uint16_t)((float)envelope_index * (880.0 / frequency)); +#ifdef AUDIO_VOICES + uint16_t envelope_index = timer_elapsed(voices_timer); // TODO: multiply in some factor? + uint16_t compensated_index = envelope_index / 100; // TODO: correct factor would be? +#endif switch (voice) { case default_voice: - glissando = false; - note_timbre = TIMBRE_50; - polyphony_rate = 0; + glissando = false; + // note_timbre = TIMBRE_50; //Note: leave the user the possibility to adjust the timbre with 'audio_set_timbre' break; #ifdef AUDIO_VOICES + case vibrating: + glissando = false; + vibrato = true; + break; + case something: - glissando = false; - polyphony_rate = 0; + glissando = false; switch (compensated_index) { case 0 ... 9: note_timbre = TIMBRE_12; @@ -57,24 +96,23 @@ float voice_envelope(float frequency) { break; case 20 ... 200: - note_timbre = .125 + .125; + note_timbre = 12 + 12; break; default: - note_timbre = .125; + note_timbre = 12; break; } break; case drums: - glissando = false; - polyphony_rate = 0; + glissando = false; // switch (compensated_index) { // case 0 ... 10: - // note_timbre = 0.5; + // note_timbre = 50; // break; // case 11 ... 20: - // note_timbre = 0.5 * (21 - compensated_index) / 10; + // note_timbre = 50 * (21 - compensated_index) / 10; // break; // default: // note_timbre = 0; @@ -88,10 +126,10 @@ float voice_envelope(float frequency) { frequency = (rand() % (int)(40)) + 60; switch (envelope_index) { case 0 ... 10: - note_timbre = 0.5; + note_timbre = 50; break; case 11 ... 20: - note_timbre = 0.5 * (21 - envelope_index) / 10; + note_timbre = 50 * (21 - envelope_index) / 10; break; default: note_timbre = 0; @@ -103,10 +141,10 @@ float voice_envelope(float frequency) { frequency = (rand() % (int)(1000)) + 1000; switch (envelope_index) { case 0 ... 5: - note_timbre = 0.5; + note_timbre = 50; break; case 6 ... 20: - note_timbre = 0.5 * (21 - envelope_index) / 15; + note_timbre = 50 * (21 - envelope_index) / 15; break; default: note_timbre = 0; @@ -118,10 +156,10 @@ float voice_envelope(float frequency) { frequency = (rand() % (int)(2000)) + 3000; switch (envelope_index) { case 0 ... 15: - note_timbre = 0.5; + note_timbre = 50; break; case 16 ... 20: - note_timbre = 0.5 * (21 - envelope_index) / 5; + note_timbre = 50 * (21 - envelope_index) / 5; break; default: note_timbre = 0; @@ -133,10 +171,10 @@ float voice_envelope(float frequency) { frequency = (rand() % (int)(2000)) + 3000; switch (envelope_index) { case 0 ... 35: - note_timbre = 0.5; + note_timbre = 50; break; case 36 ... 50: - note_timbre = 0.5 * (51 - envelope_index) / 15; + note_timbre = 50 * (51 - envelope_index) / 15; break; default: note_timbre = 0; @@ -145,8 +183,7 @@ float voice_envelope(float frequency) { } break; case butts_fader: - glissando = true; - polyphony_rate = 0; + glissando = true; switch (compensated_index) { case 0 ... 9: frequency = frequency / 4; @@ -159,7 +196,7 @@ float voice_envelope(float frequency) { break; case 20 ... 200: - note_timbre = .125 - pow(((float)compensated_index - 20) / (200 - 20), 2) * .125; + note_timbre = 12 - (uint8_t)(pow(((float)compensated_index - 20) / (200 - 20), 2) * 12.5); break; default: @@ -169,7 +206,6 @@ float voice_envelope(float frequency) { break; // case octave_crunch: - // polyphony_rate = 0; // switch (compensated_index) { // case 0 ... 9: // case 20 ... 24: @@ -187,14 +223,13 @@ float voice_envelope(float frequency) { // default: // note_timbre = TIMBRE_12; - // break; + // break; // } // break; case duty_osc: // This slows the loop down a substantial amount, so higher notes may freeze - glissando = true; - polyphony_rate = 0; + glissando = true; switch (compensated_index) { default: # define OCS_SPEED 10 @@ -202,38 +237,36 @@ float voice_envelope(float frequency) { // sine wave is slow // note_timbre = (sin((float)compensated_index/10000*OCS_SPEED) * OCS_AMP / 2) + .5; // triangle wave is a bit faster - note_timbre = (float)abs((compensated_index * OCS_SPEED % 3000) - 1500) * (OCS_AMP / 1500) + (1 - OCS_AMP) / 2; + note_timbre = (uint8_t)abs((compensated_index * OCS_SPEED % 3000) - 1500) * (OCS_AMP / 1500) + (1 - OCS_AMP) / 2; break; } break; case duty_octave_down: - glissando = true; - polyphony_rate = 0; - note_timbre = (envelope_index % 2) * .125 + .375 * 2; - if ((envelope_index % 4) == 0) note_timbre = 0.5; + glissando = true; + note_timbre = (uint8_t)(100 * (envelope_index % 2) * .125 + .375 * 2); + if ((envelope_index % 4) == 0) note_timbre = 50; if ((envelope_index % 8) == 0) note_timbre = 0; break; case delayed_vibrato: - glissando = true; - polyphony_rate = 0; - note_timbre = TIMBRE_50; + glissando = true; + note_timbre = TIMBRE_50; # define VOICE_VIBRATO_DELAY 150 # define VOICE_VIBRATO_SPEED 50 switch (compensated_index) { case 0 ... VOICE_VIBRATO_DELAY: break; default: + // TODO: merge/replace with voice_add_vibrato above frequency = frequency * vibrato_lut[(int)fmod((((float)compensated_index - (VOICE_VIBRATO_DELAY + 1)) / 1000 * VOICE_VIBRATO_SPEED), VIBRATO_LUT_LENGTH)]; break; } break; // case delayed_vibrato_octave: - // polyphony_rate = 0; // if ((envelope_index % 2) == 1) { - // note_timbre = 0.55; + // note_timbre = 55; // } else { - // note_timbre = 0.45; + // note_timbre = 45; // } // #define VOICE_VIBRATO_DELAY 150 // #define VOICE_VIBRATO_SPEED 50 @@ -246,35 +279,64 @@ float voice_envelope(float frequency) { // } // break; // case duty_fifth_down: - // note_timbre = 0.5; + // note_timbre = TIMBRE_50; // if ((envelope_index % 3) == 0) - // note_timbre = 0.75; + // note_timbre = TIMBRE_75; // break; // case duty_fourth_down: - // note_timbre = 0.0; + // note_timbre = 0; // if ((envelope_index % 12) == 0) - // note_timbre = 0.75; + // note_timbre = TIMBRE_75; // if (((envelope_index % 12) % 4) != 1) - // note_timbre = 0.75; + // note_timbre = TIMBRE_75; // break; // case duty_third_down: - // note_timbre = 0.5; + // note_timbre = TIMBRE_50; // if ((envelope_index % 5) == 0) - // note_timbre = 0.75; + // note_timbre = TIMBRE_75; // break; // case duty_fifth_third_down: - // note_timbre = 0.5; + // note_timbre = TIMBRE_50; // if ((envelope_index % 5) == 0) - // note_timbre = 0.75; + // note_timbre = TIMBRE_75; // if ((envelope_index % 3) == 0) - // note_timbre = 0.25; + // note_timbre = TIMBRE_25; // break; -#endif +#endif // AUDIO_VOICES default: break; } +#ifdef AUDIO_VOICES + if (vibrato && (vibrato_strength > 0)) { + frequency = voice_add_vibrato(frequency); + } + + if (glissando) { + // TODO: where to keep track of the start-frequency? + // frequency = voice_add_glissando(??, frequency); + } +#endif // AUDIO_VOICES + return frequency; } + +// Vibrato functions + +void voice_set_vibrato_rate(float rate) { vibrato_rate = rate; } +void voice_increase_vibrato_rate(float change) { vibrato_rate *= change; } +void voice_decrease_vibrato_rate(float change) { vibrato_rate /= change; } +void voice_set_vibrato_strength(float strength) { vibrato_strength = strength; } +void voice_increase_vibrato_strength(float change) { vibrato_strength *= change; } +void voice_decrease_vibrato_strength(float change) { vibrato_strength /= change; } + +// Timbre functions + +void voice_set_timbre(uint8_t timbre) { + if ((timbre > 0) && (timbre < 100)) { + note_timbre = timbre; + } +} +uint8_t voice_get_timbre(void) { return note_timbre; } diff --git a/quantum/audio/voices.h b/quantum/audio/voices.h index abafa2b404e..578350d337d 100644 --- a/quantum/audio/voices.h +++ b/quantum/audio/voices.h @@ -1,4 +1,5 @@ /* Copyright 2016 Jack Humbert + * Copyright 2020 JohSchneider * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,7 +14,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #pragma once #include @@ -29,6 +29,7 @@ float voice_envelope(float frequency); typedef enum { default_voice, #ifdef AUDIO_VOICES + vibrating, something, drums, butts_fader, @@ -48,3 +49,21 @@ typedef enum { void set_voice(voice_type v); void voice_iterate(void); void voice_deiterate(void); + +// Vibrato functions +void voice_set_vibrato_rate(float rate); +void voice_increase_vibrato_rate(float change); +void voice_decrease_vibrato_rate(float change); +void voice_set_vibrato_strength(float strength); +void voice_increase_vibrato_strength(float change); +void voice_decrease_vibrato_strength(float change); + +// Timbre functions +/** + * @brief set the global timbre for tones to be played + * @note: only applies to pwm implementations - where it adjusts the duty-cycle + * @note: using any instrument from voices.[ch] other than 'default' may override the set value + * @param[in]: timbre: valid range is (0,100) + */ +void voice_set_timbre(uint8_t timbre); +uint8_t voice_get_timbre(void); diff --git a/quantum/audio/wave.h b/quantum/audio/wave.h deleted file mode 100644 index 48210a944e8..00000000000 --- a/quantum/audio/wave.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include - -#define SINE_LENGTH 2048 - -const uint8_t sinewave[] PROGMEM = // 2048 values - {0x80, 0x80, 0x80, 0x81, 0x81, 0x81, 0x82, 0x82, 0x83, 0x83, 0x83, 0x84, 0x84, 0x85, 0x85, 0x85, 0x86, 0x86, 0x87, 0x87, 0x87, 0x88, 0x88, 0x88, 0x89, 0x89, 0x8a, 0x8a, 0x8a, 0x8b, 0x8b, 0x8c, 0x8c, 0x8c, 0x8d, 0x8d, 0x8e, 0x8e, 0x8e, 0x8f, 0x8f, 0x8f, 0x90, 0x90, 0x91, 0x91, 0x91, 0x92, 0x92, 0x93, 0x93, 0x93, 0x94, 0x94, 0x95, 0x95, 0x95, 0x96, 0x96, 0x96, 0x97, 0x97, 0x98, 0x98, 0x98, 0x99, 0x99, 0x9a, 0x9a, 0x9a, 0x9b, 0x9b, 0x9b, 0x9c, 0x9c, 0x9d, 0x9d, 0x9d, 0x9e, 0x9e, 0x9e, 0x9f, 0x9f, 0xa0, 0xa0, 0xa0, 0xa1, 0xa1, 0xa2, 0xa2, 0xa2, 0xa3, 0xa3, 0xa3, 0xa4, 0xa4, 0xa5, 0xa5, 0xa5, 0xa6, 0xa6, 0xa6, 0xa7, 0xa7, 0xa7, 0xa8, 0xa8, 0xa9, 0xa9, 0xa9, 0xaa, 0xaa, 0xaa, 0xab, 0xab, 0xac, 0xac, 0xac, 0xad, 0xad, 0xad, 0xae, 0xae, 0xae, 0xaf, 0xaf, 0xb0, 0xb0, 0xb0, 0xb1, 0xb1, 0xb1, 0xb2, 0xb2, 0xb2, 0xb3, 0xb3, 0xb4, 0xb4, 0xb4, 0xb5, 0xb5, 0xb5, 0xb6, 0xb6, 0xb6, 0xb7, 0xb7, 0xb7, 0xb8, 0xb8, 0xb8, 0xb9, 0xb9, 0xba, 0xba, 0xba, 0xbb, - 0xbb, 0xbb, 0xbc, 0xbc, 0xbc, 0xbd, 0xbd, 0xbd, 0xbe, 0xbe, 0xbe, 0xbf, 0xbf, 0xbf, 0xc0, 0xc0, 0xc0, 0xc1, 0xc1, 0xc1, 0xc2, 0xc2, 0xc2, 0xc3, 0xc3, 0xc3, 0xc4, 0xc4, 0xc4, 0xc5, 0xc5, 0xc5, 0xc6, 0xc6, 0xc6, 0xc7, 0xc7, 0xc7, 0xc8, 0xc8, 0xc8, 0xc9, 0xc9, 0xc9, 0xca, 0xca, 0xca, 0xcb, 0xcb, 0xcb, 0xcb, 0xcc, 0xcc, 0xcc, 0xcd, 0xcd, 0xcd, 0xce, 0xce, 0xce, 0xcf, 0xcf, 0xcf, 0xcf, 0xd0, 0xd0, 0xd0, 0xd1, 0xd1, 0xd1, 0xd2, 0xd2, 0xd2, 0xd2, 0xd3, 0xd3, 0xd3, 0xd4, 0xd4, 0xd4, 0xd5, 0xd5, 0xd5, 0xd5, 0xd6, 0xd6, 0xd6, 0xd7, 0xd7, 0xd7, 0xd7, 0xd8, 0xd8, 0xd8, 0xd9, 0xd9, 0xd9, 0xd9, 0xda, 0xda, 0xda, 0xda, 0xdb, 0xdb, 0xdb, 0xdc, 0xdc, 0xdc, 0xdc, 0xdd, 0xdd, 0xdd, 0xdd, 0xde, 0xde, 0xde, 0xde, 0xdf, 0xdf, 0xdf, 0xe0, 0xe0, 0xe0, 0xe0, 0xe1, 0xe1, 0xe1, 0xe1, 0xe2, 0xe2, 0xe2, 0xe2, 0xe3, 0xe3, 0xe3, 0xe3, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe5, 0xe5, 0xe5, 0xe5, 0xe6, 0xe6, 0xe6, 0xe6, 0xe7, 0xe7, 0xe7, 0xe7, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, - 0xe9, 0xe9, 0xe9, 0xe9, 0xea, 0xea, 0xea, 0xea, 0xea, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xec, 0xec, 0xec, 0xec, 0xec, 0xed, 0xed, 0xed, 0xed, 0xed, 0xee, 0xee, 0xee, 0xee, 0xee, 0xef, 0xef, 0xef, 0xef, 0xef, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, - 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, 0xf7, - 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf6, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf5, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf4, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf2, 0xf1, 0xf1, 0xf1, 0xf1, 0xf1, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xef, 0xef, 0xef, 0xef, 0xef, 0xee, 0xee, 0xee, 0xee, 0xee, 0xed, 0xed, 0xed, 0xed, 0xed, 0xec, 0xec, 0xec, 0xec, 0xec, 0xeb, 0xeb, 0xeb, 0xeb, 0xeb, 0xea, 0xea, 0xea, 0xea, 0xea, 0xe9, 0xe9, 0xe9, 0xe9, 0xe8, 0xe8, 0xe8, 0xe8, 0xe8, 0xe7, 0xe7, 0xe7, 0xe7, 0xe6, 0xe6, 0xe6, 0xe6, 0xe5, 0xe5, 0xe5, 0xe5, 0xe4, 0xe4, 0xe4, 0xe4, 0xe4, 0xe3, 0xe3, 0xe3, 0xe3, 0xe2, 0xe2, 0xe2, 0xe2, 0xe1, 0xe1, 0xe1, 0xe1, 0xe0, 0xe0, 0xe0, 0xe0, 0xdf, 0xdf, 0xdf, 0xde, 0xde, 0xde, 0xde, 0xdd, 0xdd, 0xdd, 0xdd, 0xdc, 0xdc, 0xdc, 0xdc, 0xdb, 0xdb, 0xdb, 0xda, 0xda, 0xda, 0xda, 0xd9, 0xd9, 0xd9, 0xd9, 0xd8, 0xd8, 0xd8, 0xd7, 0xd7, 0xd7, 0xd7, 0xd6, 0xd6, 0xd6, 0xd5, 0xd5, 0xd5, 0xd5, 0xd4, 0xd4, 0xd4, - 0xd3, 0xd3, 0xd3, 0xd2, 0xd2, 0xd2, 0xd2, 0xd1, 0xd1, 0xd1, 0xd0, 0xd0, 0xd0, 0xcf, 0xcf, 0xcf, 0xcf, 0xce, 0xce, 0xce, 0xcd, 0xcd, 0xcd, 0xcc, 0xcc, 0xcc, 0xcb, 0xcb, 0xcb, 0xcb, 0xca, 0xca, 0xca, 0xc9, 0xc9, 0xc9, 0xc8, 0xc8, 0xc8, 0xc7, 0xc7, 0xc7, 0xc6, 0xc6, 0xc6, 0xc5, 0xc5, 0xc5, 0xc4, 0xc4, 0xc4, 0xc3, 0xc3, 0xc3, 0xc2, 0xc2, 0xc2, 0xc1, 0xc1, 0xc1, 0xc0, 0xc0, 0xc0, 0xbf, 0xbf, 0xbf, 0xbe, 0xbe, 0xbe, 0xbd, 0xbd, 0xbd, 0xbc, 0xbc, 0xbc, 0xbb, 0xbb, 0xbb, 0xba, 0xba, 0xba, 0xb9, 0xb9, 0xb8, 0xb8, 0xb8, 0xb7, 0xb7, 0xb7, 0xb6, 0xb6, 0xb6, 0xb5, 0xb5, 0xb5, 0xb4, 0xb4, 0xb4, 0xb3, 0xb3, 0xb2, 0xb2, 0xb2, 0xb1, 0xb1, 0xb1, 0xb0, 0xb0, 0xb0, 0xaf, 0xaf, 0xae, 0xae, 0xae, 0xad, 0xad, 0xad, 0xac, 0xac, 0xac, 0xab, 0xab, 0xaa, 0xaa, 0xaa, 0xa9, 0xa9, 0xa9, 0xa8, 0xa8, 0xa7, 0xa7, 0xa7, 0xa6, 0xa6, 0xa6, 0xa5, 0xa5, 0xa5, 0xa4, 0xa4, 0xa3, 0xa3, 0xa3, 0xa2, 0xa2, 0xa2, 0xa1, 0xa1, 0xa0, 0xa0, 0xa0, 0x9f, 0x9f, 0x9e, 0x9e, 0x9e, 0x9d, - 0x9d, 0x9d, 0x9c, 0x9c, 0x9b, 0x9b, 0x9b, 0x9a, 0x9a, 0x9a, 0x99, 0x99, 0x98, 0x98, 0x98, 0x97, 0x97, 0x96, 0x96, 0x96, 0x95, 0x95, 0x95, 0x94, 0x94, 0x93, 0x93, 0x93, 0x92, 0x92, 0x91, 0x91, 0x91, 0x90, 0x90, 0x8f, 0x8f, 0x8f, 0x8e, 0x8e, 0x8e, 0x8d, 0x8d, 0x8c, 0x8c, 0x8c, 0x8b, 0x8b, 0x8a, 0x8a, 0x8a, 0x89, 0x89, 0x88, 0x88, 0x88, 0x87, 0x87, 0x87, 0x86, 0x86, 0x85, 0x85, 0x85, 0x84, 0x84, 0x83, 0x83, 0x83, 0x82, 0x82, 0x81, 0x81, 0x81, 0x80, 0x80, 0x80, 0x7f, 0x7f, 0x7e, 0x7e, 0x7e, 0x7d, 0x7d, 0x7c, 0x7c, 0x7c, 0x7b, 0x7b, 0x7a, 0x7a, 0x7a, 0x79, 0x79, 0x78, 0x78, 0x78, 0x77, 0x77, 0x77, 0x76, 0x76, 0x75, 0x75, 0x75, 0x74, 0x74, 0x73, 0x73, 0x73, 0x72, 0x72, 0x71, 0x71, 0x71, 0x70, 0x70, 0x70, 0x6f, 0x6f, 0x6e, 0x6e, 0x6e, 0x6d, 0x6d, 0x6c, 0x6c, 0x6c, 0x6b, 0x6b, 0x6a, 0x6a, 0x6a, 0x69, 0x69, 0x69, 0x68, 0x68, 0x67, 0x67, 0x67, 0x66, 0x66, 0x65, 0x65, 0x65, 0x64, 0x64, 0x64, 0x63, 0x63, 0x62, 0x62, 0x62, 0x61, 0x61, 0x61, 0x60, - 0x60, 0x5f, 0x5f, 0x5f, 0x5e, 0x5e, 0x5d, 0x5d, 0x5d, 0x5c, 0x5c, 0x5c, 0x5b, 0x5b, 0x5a, 0x5a, 0x5a, 0x59, 0x59, 0x59, 0x58, 0x58, 0x58, 0x57, 0x57, 0x56, 0x56, 0x56, 0x55, 0x55, 0x55, 0x54, 0x54, 0x53, 0x53, 0x53, 0x52, 0x52, 0x52, 0x51, 0x51, 0x51, 0x50, 0x50, 0x4f, 0x4f, 0x4f, 0x4e, 0x4e, 0x4e, 0x4d, 0x4d, 0x4d, 0x4c, 0x4c, 0x4b, 0x4b, 0x4b, 0x4a, 0x4a, 0x4a, 0x49, 0x49, 0x49, 0x48, 0x48, 0x48, 0x47, 0x47, 0x47, 0x46, 0x46, 0x45, 0x45, 0x45, 0x44, 0x44, 0x44, 0x43, 0x43, 0x43, 0x42, 0x42, 0x42, 0x41, 0x41, 0x41, 0x40, 0x40, 0x40, 0x3f, 0x3f, 0x3f, 0x3e, 0x3e, 0x3e, 0x3d, 0x3d, 0x3d, 0x3c, 0x3c, 0x3c, 0x3b, 0x3b, 0x3b, 0x3a, 0x3a, 0x3a, 0x39, 0x39, 0x39, 0x38, 0x38, 0x38, 0x37, 0x37, 0x37, 0x36, 0x36, 0x36, 0x35, 0x35, 0x35, 0x34, 0x34, 0x34, 0x34, 0x33, 0x33, 0x33, 0x32, 0x32, 0x32, 0x31, 0x31, 0x31, 0x30, 0x30, 0x30, 0x30, 0x2f, 0x2f, 0x2f, 0x2e, 0x2e, 0x2e, 0x2d, 0x2d, 0x2d, 0x2d, 0x2c, 0x2c, 0x2c, 0x2b, 0x2b, 0x2b, 0x2a, 0x2a, - 0x2a, 0x2a, 0x29, 0x29, 0x29, 0x28, 0x28, 0x28, 0x28, 0x27, 0x27, 0x27, 0x26, 0x26, 0x26, 0x26, 0x25, 0x25, 0x25, 0x25, 0x24, 0x24, 0x24, 0x23, 0x23, 0x23, 0x23, 0x22, 0x22, 0x22, 0x22, 0x21, 0x21, 0x21, 0x21, 0x20, 0x20, 0x20, 0x1f, 0x1f, 0x1f, 0x1f, 0x1e, 0x1e, 0x1e, 0x1e, 0x1d, 0x1d, 0x1d, 0x1d, 0x1c, 0x1c, 0x1c, 0x1c, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1a, 0x1a, 0x1a, 0x1a, 0x19, 0x19, 0x19, 0x19, 0x18, 0x18, 0x18, 0x18, 0x17, 0x17, 0x17, 0x17, 0x17, 0x16, 0x16, 0x16, 0x16, 0x15, 0x15, 0x15, 0x15, 0x15, 0x14, 0x14, 0x14, 0x14, 0x14, 0x13, 0x13, 0x13, 0x13, 0x13, 0x12, 0x12, 0x12, 0x12, 0x12, 0x11, 0x11, 0x11, 0x11, 0x11, 0x10, 0x10, 0x10, 0x10, 0x10, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xe, 0xe, 0xe, 0xe, 0xe, 0xd, 0xd, 0xd, 0xd, 0xd, 0xd, 0xc, 0xc, 0xc, 0xc, 0xc, 0xc, 0xb, 0xb, 0xb, 0xb, 0xb, 0xb, 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, 0x9, 0x9, 0x9, 0x9, 0x9, 0x9, 0x9, 0x8, 0x8, 0x8, 0x8, 0x8, - 0x8, 0x8, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, - 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x2, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x5, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x6, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x7, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x8, 0x9, 0x9, 0x9, 0x9, 0x9, 0x9, 0x9, 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, 0xb, 0xb, 0xb, 0xb, 0xb, 0xb, 0xc, 0xc, 0xc, 0xc, 0xc, 0xc, 0xd, 0xd, 0xd, 0xd, 0xd, 0xd, 0xe, 0xe, 0xe, 0xe, 0xe, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x11, 0x11, 0x11, 0x11, 0x12, 0x12, 0x12, 0x12, 0x12, 0x13, 0x13, 0x13, 0x13, 0x13, 0x14, 0x14, 0x14, 0x14, 0x14, 0x15, 0x15, 0x15, 0x15, 0x15, 0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x18, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x1a, 0x1a, 0x1a, 0x1a, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1c, 0x1c, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, 0x1e, 0x1e, 0x1f, 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x22, 0x23, 0x23, 0x23, 0x23, 0x24, 0x24, 0x24, 0x25, 0x25, 0x25, 0x25, 0x26, 0x26, 0x26, 0x26, 0x27, 0x27, 0x27, 0x28, 0x28, 0x28, 0x28, 0x29, 0x29, 0x29, 0x2a, 0x2a, 0x2a, 0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d, 0x2d, 0x2d, 0x2d, 0x2e, 0x2e, 0x2e, 0x2f, 0x2f, 0x2f, 0x30, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x32, 0x32, 0x32, 0x33, 0x33, 0x33, 0x34, 0x34, 0x34, 0x34, 0x35, 0x35, 0x35, 0x36, 0x36, 0x36, 0x37, 0x37, 0x37, 0x38, 0x38, 0x38, 0x39, 0x39, 0x39, 0x3a, 0x3a, 0x3a, 0x3b, 0x3b, 0x3b, 0x3c, 0x3c, 0x3c, 0x3d, 0x3d, 0x3d, 0x3e, 0x3e, 0x3e, 0x3f, 0x3f, 0x3f, 0x40, 0x40, 0x40, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x43, 0x43, 0x43, 0x44, 0x44, 0x44, 0x45, 0x45, 0x45, 0x46, - 0x46, 0x47, 0x47, 0x47, 0x48, 0x48, 0x48, 0x49, 0x49, 0x49, 0x4a, 0x4a, 0x4a, 0x4b, 0x4b, 0x4b, 0x4c, 0x4c, 0x4d, 0x4d, 0x4d, 0x4e, 0x4e, 0x4e, 0x4f, 0x4f, 0x4f, 0x50, 0x50, 0x51, 0x51, 0x51, 0x52, 0x52, 0x52, 0x53, 0x53, 0x53, 0x54, 0x54, 0x55, 0x55, 0x55, 0x56, 0x56, 0x56, 0x57, 0x57, 0x58, 0x58, 0x58, 0x59, 0x59, 0x59, 0x5a, 0x5a, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, 0x5c, 0x5d, 0x5d, 0x5d, 0x5e, 0x5e, 0x5f, 0x5f, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x61, 0x62, 0x62, 0x62, 0x63, 0x63, 0x64, 0x64, 0x64, 0x65, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x67, 0x68, 0x68, 0x69, 0x69, 0x69, 0x6a, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c, 0x6d, 0x6d, 0x6e, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71, 0x71, 0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75, 0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f}; diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index 2ecdd4f2c42..e47192de342 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -126,7 +126,7 @@ # define COMxx1 COM1B1 # define OCRxx OCR1B # endif -#elif !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) +#elif (AUDIO_PIN != B5) && (AUDIO_PIN != B6) && (AUDIO_PIN != B7) && (AUDIO_PIN_ALT != B5) && (AUDIO_PIN_ALT != B6) && (AUDIO_PIN_ALT != B7) // Timer 1 is not in use by Audio feature, Backlight can use it # pragma message "Using hardware timer 1 with software PWM" # define HARDWARE_PWM @@ -145,7 +145,7 @@ # define OCIExA OCIE1A # define OCRxx OCR1A -#elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) +#elif (AUDIO_PIN != C4) && (AUDIO_PIN != C5) && (AUDIO_PIN != C6) # pragma message "Using hardware timer 3 with software PWM" // Timer 3 is not in use by Audio feature, Backlight can use it # define HARDWARE_PWM diff --git a/requirements-dev.txt b/requirements-dev.txt index 1db3b6d7331..caae27741ab 100644 --- a/requirements-dev.txt +++ b/requirements-dev.txt @@ -6,3 +6,4 @@ nose2 flake8 pep8-naming yapf +wave diff --git a/users/yanfali/config.h b/users/yanfali/config.h index 26517a9f64b..a39e95c9dde 100644 --- a/users/yanfali/config.h +++ b/users/yanfali/config.h @@ -2,7 +2,7 @@ #ifdef KEYBOARD_evyd13_plain60 -#define B7_AUDIO +#define AUDIO_PIN B7 #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(GUITAR_SOUND) #endif diff --git a/util/audio_generate_dac_lut.py b/util/audio_generate_dac_lut.py new file mode 100755 index 00000000000..c31ba3d7ee0 --- /dev/null +++ b/util/audio_generate_dac_lut.py @@ -0,0 +1,67 @@ +#!/usr/bin/env python3 +# +# Copyright 2020 JohSchneider +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +AUDIO_DAC_BUFFER_SIZE=256 +AUDIO_DAC_SAMPLE_MAX=4095 + +def plot(values): + for v in values: + print('0'* int(v * 80/AUDIO_DAC_SAMPLE_MAX)) + +def to_lut(values): + for v in values: + print(hex(int(v)), end=", ") + + +from math import sin, tau, pi + +samples=[] + +def sampleSine(): + for s in range(AUDIO_DAC_BUFFER_SIZE): + samples.append((sin((s/AUDIO_DAC_BUFFER_SIZE)*tau - pi/2) + 1 )/2* AUDIO_DAC_SAMPLE_MAX) + +def sampleTriangle(): + for s in range(AUDIO_DAC_BUFFER_SIZE): + if s < AUDIO_DAC_BUFFER_SIZE/2: + samples.append(s/(AUDIO_DAC_BUFFER_SIZE/2) * AUDIO_DAC_SAMPLE_MAX) + else: + samples.append(AUDIO_DAC_SAMPLE_MAX - (s-AUDIO_DAC_BUFFER_SIZE/2)/(AUDIO_DAC_BUFFER_SIZE/2) * AUDIO_DAC_SAMPLE_MAX) + +#compromise between square and triangle wave, +def sampleTrapezoidal(): + for i in range(AUDIO_DAC_BUFFER_SIZE): + a=3 #slope/inclination + if (i < AUDIO_DAC_BUFFER_SIZE/2): + s = a * (i * AUDIO_DAC_SAMPLE_MAX/(AUDIO_DAC_BUFFER_SIZE/2)) + (1-a)*AUDIO_DAC_SAMPLE_MAX/2 + else: + i = i - AUDIO_DAC_BUFFER_SIZE/2 + s = AUDIO_DAC_SAMPLE_MAX - a * (i * AUDIO_DAC_SAMPLE_MAX/(AUDIO_DAC_BUFFER_SIZE/2)) - (1-a)*AUDIO_DAC_SAMPLE_MAX/2 + + if s < 0: + s=0 + if s> AUDIO_DAC_SAMPLE_MAX: + s=AUDIO_DAC_SAMPLE_MAX + samples.append(s) + + +#sampleSine() +sampleTrapezoidal() +#print(samples) +plot(samples) +to_lut(samples) diff --git a/util/sample_parser.py b/util/sample_parser.py new file mode 100755 index 00000000000..70e193aee7c --- /dev/null +++ b/util/sample_parser.py @@ -0,0 +1,39 @@ +#!/usr/bin/env python3 +# +# Copyright 2019 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +import wave, struct, sys + +waveFile = wave.open(sys.argv[1], 'r') +# print(str(waveFile.getparams())) +# sys.exit() + +if (waveFile.getsampwidth() != 2): + raise(Exception("This script currently only works with 16bit audio files")) + +length = waveFile.getnframes() +out = "#define DAC_SAMPLE_CUSTOM_LENGTH " + str(length) + "\n\n" +out += "static const dacsample_t dac_sample_custom[" + str(length) + "] = {" +for i in range(0,length): + if (i % 8 == 0): + out += "\n " + waveData = waveFile.readframes(1) + data = struct.unpack(". +# + +import wave, struct, sys + +waveFile = wave.open(sys.argv[1], 'r') + +length = waveFile.getnframes() +out = "#define DAC_WAVETABLE_CUSTOM_LENGTH " + str(int(length / 256)) + "\n\n" +out += "static const dacsample_t dac_wavetable_custom[" + str(int(length / 256)) + "][256] = {" +for i in range(0,length): + if (i % 8 == 0): + out += "\n " + if (i % 256 == 0): + out = out[:-2] + out += "{\n " + waveData = waveFile.readframes(1) + data = struct.unpack(" Date: Mon, 15 Feb 2021 11:53:15 +1100 Subject: [PATCH 127/145] Format code according to conventions (#11907) Co-authored-by: QMK Bot --- drivers/chibios/usbpd_stm32g4.c | 2 +- quantum/audio/driver_chibios_dac_basic.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/chibios/usbpd_stm32g4.c b/drivers/chibios/usbpd_stm32g4.c index 54c1e1fb3d0..f16ca8aeaea 100644 --- a/drivers/chibios/usbpd_stm32g4.c +++ b/drivers/chibios/usbpd_stm32g4.c @@ -64,7 +64,7 @@ __attribute__((weak)) usbpd_allowance_t usbpd_get_allowance(void) { switch (vstate_max) { case 0: case 1: - return USBPD_500MA; // Note that this is 500mA (i.e. max USB 2.0), not 900mA, as we're not using USB 3.1 as a sink device. + return USBPD_500MA; // Note that this is 500mA (i.e. max USB 2.0), not 900mA, as we're not using USB 3.1 as a sink device. case 2: return USBPD_1500MA; case 3: diff --git a/quantum/audio/driver_chibios_dac_basic.c b/quantum/audio/driver_chibios_dac_basic.c index 9a1c9a8c19c..b8cec5ff1bd 100644 --- a/quantum/audio/driver_chibios_dac_basic.c +++ b/quantum/audio/driver_chibios_dac_basic.c @@ -74,9 +74,9 @@ GPTConfig gpt7cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE, static void gpt_audio_state_cb(GPTDriver *gptp); GPTConfig gptStateUpdateCfg = {.frequency = 10, - .callback = gpt_audio_state_cb, - .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ - .dier = 0U}; + .callback = gpt_audio_state_cb, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; static const DACConfig dac_conf_ch1 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; static const DACConfig dac_conf_ch2 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; @@ -131,7 +131,7 @@ void channel_2_start(void) { void channel_2_stop(void) { gptStopTimer(&GPTD7); - palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); \ + palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); palSetPad(GPIOA, 5); } From 1bc8a6e5d49861b268f9274a8686a2640e36e0b5 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 16 Feb 2021 11:28:42 +1100 Subject: [PATCH 128/145] ChibiOS conf migrations... take 14 (#11927) * ChibiOS conf upgrade for geminate60 geminate60 - a2765e46491151a8de309bc1cc8ce7e953ee1e50 * ChibiOS conf upgrade for sowbug/68keys sowbug/68keys - 7475a03ff2d704497d503a002b6c5dbac12f0a84 * ChibiOS conf upgrade for sowbug/ansi_tkl sowbug/ansi_tkl - 87be98eb6ed03a8752c1082c872a8a75b1d00ae7 --- keyboards/geminate60/halconf.h | 524 -------------------- keyboards/geminate60/rules.mk | 1 + keyboards/sowbug/68keys/chconf.h | 729 ++-------------------------- keyboards/sowbug/68keys/halconf.h | 536 +------------------- keyboards/sowbug/68keys/mcuconf.h | 217 +-------- keyboards/sowbug/ansi_tkl/chconf.h | 729 ++-------------------------- keyboards/sowbug/ansi_tkl/halconf.h | 536 +------------------- keyboards/sowbug/ansi_tkl/mcuconf.h | 217 +-------- 8 files changed, 133 insertions(+), 3356 deletions(-) delete mode 100644 keyboards/geminate60/halconf.h diff --git a/keyboards/geminate60/halconf.h b/keyboards/geminate60/halconf.h deleted file mode 100644 index b6c7b392ca7..00000000000 --- a/keyboards/geminate60/halconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -# define HALCONF_H - -# define _CHIBIOS_HAL_CONF_ -# define _CHIBIOS_HAL_CONF_VER_7_0_ - -# include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -# define HAL_USE_PAL TRUE -# endif - -/** - * @brief Enables the ADC subsystem. - */ -# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -# define HAL_USE_ADC FALSE -# endif - -/** - * @brief Enables the CAN subsystem. - */ -# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -# define HAL_USE_CAN FALSE -# endif - -/** - * @brief Enables the cryptographic subsystem. - */ -# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -# define HAL_USE_CRY FALSE -# endif - -/** - * @brief Enables the DAC subsystem. - */ -# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -# define HAL_USE_DAC TRUE -# endif - -/** - * @brief Enables the GPT subsystem. - */ -# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -# define HAL_USE_GPT TRUE -# endif - -/** - * @brief Enables the I2C subsystem. - */ -# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -# define HAL_USE_I2C TRUE -# endif - -/** - * @brief Enables the I2S subsystem. - */ -# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -# define HAL_USE_I2S FALSE -# endif - -/** - * @brief Enables the ICU subsystem. - */ -# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -# define HAL_USE_ICU FALSE -# endif - -/** - * @brief Enables the MAC subsystem. - */ -# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -# define HAL_USE_MAC FALSE -# endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -# define HAL_USE_MMC_SPI FALSE -# endif - -/** - * @brief Enables the PWM subsystem. - */ -# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -# define HAL_USE_PWM TRUE -# endif - -/** - * @brief Enables the RTC subsystem. - */ -# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -# define HAL_USE_RTC FALSE -# endif - -/** - * @brief Enables the SDC subsystem. - */ -# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -# define HAL_USE_SDC FALSE -# endif - -/** - * @brief Enables the SERIAL subsystem. - */ -# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL FALSE -# endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -# define HAL_USE_SERIAL_USB TRUE -# endif - -/** - * @brief Enables the SIO subsystem. - */ -# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -# define HAL_USE_SIO FALSE -# endif - -/** - * @brief Enables the SPI subsystem. - */ -# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -# define HAL_USE_SPI TRUE -# endif - -/** - * @brief Enables the TRNG subsystem. - */ -# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -# define HAL_USE_TRNG FALSE -# endif - -/** - * @brief Enables the UART subsystem. - */ -# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -# define HAL_USE_UART FALSE -# endif - -/** - * @brief Enables the USB subsystem. - */ -# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -# define HAL_USE_USB TRUE -# endif - -/** - * @brief Enables the WDG subsystem. - */ -# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -# define HAL_USE_WDG FALSE -# endif - -/** - * @brief Enables the WSPI subsystem. - */ -# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -# define HAL_USE_WSPI FALSE -# endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -# define PAL_USE_CALLBACKS TRUE -# endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -# define PAL_USE_WAIT TRUE -# endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -# define ADC_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define ADC_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -# define CAN_USE_SLEEP_MODE TRUE -# endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -# define CAN_ENFORCE_USE_CALLBACKS FALSE -# endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_USE_FALLBACK FALSE -# endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -# define HAL_CRY_ENFORCE_FALLBACK FALSE -# endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -# define DAC_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define DAC_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define I2C_USE_MUTUAL_EXCLUSION TRUE -# endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -# define MAC_USE_ZERO_COPY FALSE -# endif - -/** - * @brief Enables an event sources for incoming packets. - */ -# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -# define MAC_USE_EVENTS TRUE -# endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -# define MMC_NICE_WAITING TRUE -# endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -# define SDC_INIT_RETRY 100 -# endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -# define SDC_MMC_SUPPORT FALSE -# endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -# define SDC_NICE_WAITING TRUE -# endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -# define SDC_INIT_OCR_V20 0x50FF8000U -# endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -# define SDC_INIT_OCR 0x80100000U -# endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -# define SERIAL_DEFAULT_BITRATE 38400 -# endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_BUFFERS_SIZE 16 -# endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_SIZE 1 -# endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -# define SERIAL_USB_BUFFERS_NUMBER 2 -# endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -# define SPI_USE_WAIT TRUE -# endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -# define SPI_USE_CIRCULAR FALSE -# endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define SPI_USE_MUTUAL_EXCLUSION TRUE -# endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -# endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -# define UART_USE_WAIT FALSE -# endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define UART_USE_MUTUAL_EXCLUSION FALSE -# endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -# define USB_USE_WAIT TRUE -# endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -# define WSPI_USE_WAIT TRUE -# endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -# define WSPI_USE_MUTUAL_EXCLUSION TRUE -# endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/geminate60/rules.mk b/keyboards/geminate60/rules.mk index 676781921a4..56db0952058 100644 --- a/keyboards/geminate60/rules.mk +++ b/keyboards/geminate60/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F303 +BOARD = QMK_PROTON_C # Build Options # change yes to no to disable diff --git a/keyboards/sowbug/68keys/chconf.h b/keyboards/sowbug/68keys/chconf.h index f5e471640c5..eb600c53cf8 100644 --- a/keyboards/sowbug/68keys/chconf.h +++ b/keyboards/sowbug/68keys/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/68keys/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_HEAP TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/sowbug/68keys/halconf.h b/keyboards/sowbug/68keys/halconf.h index 921803762ea..dbcfcacfa36 100644 --- a/keyboards/sowbug/68keys/halconf.h +++ b/keyboards/sowbug/68keys/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/68keys/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/sowbug/68keys/mcuconf.h b/keyboards/sowbug/68keys/mcuconf.h index fced27289e0..150164f1c48 100644 --- a/keyboards/sowbug/68keys/mcuconf.h +++ b/keyboards/sowbug/68keys/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/68keys/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/sowbug/ansi_tkl/chconf.h b/keyboards/sowbug/ansi_tkl/chconf.h index f5e471640c5..9765d44322c 100644 --- a/keyboards/sowbug/ansi_tkl/chconf.h +++ b/keyboards/sowbug/ansi_tkl/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/ansi_tkl/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_TIMEDELTA 0 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_CONDVARS TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_MESSAGES TRUE -/** @} */ +#define CH_CFG_USE_MAILBOXES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_HEAP TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/sowbug/ansi_tkl/halconf.h b/keyboards/sowbug/ansi_tkl/halconf.h index 921803762ea..854193d1d27 100644 --- a/keyboards/sowbug/ansi_tkl/halconf.h +++ b/keyboards/sowbug/ansi_tkl/halconf.h @@ -1,525 +1,29 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/ansi_tkl/halconf.h -r platforms/chibios/common/configs/halconf.h` */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif +#pragma once -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif +#define HAL_USE_PWM TRUE -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif +#define HAL_USE_SPI TRUE -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif +#include_next -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/sowbug/ansi_tkl/mcuconf.h b/keyboards/sowbug/ansi_tkl/mcuconf.h index fced27289e0..a2f0bf00ed4 100644 --- a/keyboards/sowbug/ansi_tkl/mcuconf.h +++ b/keyboards/sowbug/ansi_tkl/mcuconf.h @@ -1,209 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 15...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/sowbug/ansi_tkl/mcuconf.h -r platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 +#pragma once -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#include_next -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -#endif /* _MCUCONF_H_ */ From d1806a26e4ad75fa0e0405283803eba22c1a49ba Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Mon, 15 Feb 2021 18:30:33 -0600 Subject: [PATCH 129/145] Split transport mirror (#11046) * Split transport mirror support * Updated RGB Matrix to respond to electrical events instead of key events * split matrix slave fix --- docs/feature_split_keyboard.md | 6 ++ docs/ja/understanding_qmk.md | 1 - docs/understanding_qmk.md | 1 - quantum/quantum.c | 10 --- quantum/rgb_matrix.c | 19 +++--- quantum/rgb_matrix.h | 2 +- .../typing_heatmap_anim.h | 4 +- quantum/split_common/matrix.c | 4 +- quantum/split_common/transport.c | 37 ++++++++--- quantum/split_common/transport.h | 4 +- tmk_core/common/eeconfig.h | 2 +- tmk_core/common/keyboard.c | 64 +++++++++++++------ 12 files changed, 94 insertions(+), 60 deletions(-) diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index c285e353d49..90af3930f95 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -191,6 +191,12 @@ communication protocol and may impact the matrix scan speed when enabled. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen). +```c +#define SPLIT_TRANSPORT_MIRROR +``` + +This mirrors the master side matrix to the slave side for features that react or require knowledge of master side key presses on the slave side. This adds a few bytes of data to the split communication protocol and may impact the matrix scan speed when enabled. The purpose of this feature is to support cosmetic use of key events (e.g. RGB reacting to Keypresses). + ### Hardware Configuration Options There are some settings that you may need to configure, based on how the hardware is set up. diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md index 74b37398f84..ab860a60961 100644 --- a/docs/ja/understanding_qmk.md +++ b/docs/ja/understanding_qmk.md @@ -147,7 +147,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216) * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20) * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58) - * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139) * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81) * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19) * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160) diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index 93964242582..331b1c893c8 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -142,7 +142,6 @@ The `process_record()` function itself is deceptively simple, but hidden within * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216) * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20) * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58) - * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139) * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81) * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19) * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160) diff --git a/quantum/quantum.c b/quantum/quantum.c index 6d202c515c4..38234bb17b3 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -221,9 +221,6 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef HAPTIC_ENABLE process_haptic(keycode, record) && #endif // HAPTIC_ENABLE -#if defined(RGB_MATRIX_ENABLE) - process_rgb_matrix(keycode, record) && -#endif #if defined(VIA_ENABLE) process_record_via(keycode, record) && #endif @@ -624,9 +621,6 @@ void matrix_init_quantum() { #ifdef AUDIO_ENABLE audio_init(); #endif -#ifdef RGB_MATRIX_ENABLE - rgb_matrix_init(); -#endif #if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) unicode_input_mode_init(); #endif @@ -681,10 +675,6 @@ void matrix_scan_quantum() { led_matrix_task(); #endif -#ifdef RGB_MATRIX_ENABLE - rgb_matrix_task(); -#endif - #ifdef WPM_ENABLE decay_wpm(); #endif diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index a945df68e00..ec17b4d72ca 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -184,11 +184,12 @@ void rgb_matrix_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { rgb_matrix_driver.set_color_all(red, green, blue); } -bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { +void process_rgb_matrix(uint8_t row, uint8_t col, bool pressed) { +#ifndef RGB_MATRIX_SPLIT + if (!is_keyboard_master()) return; +#endif #if RGB_DISABLE_TIMEOUT > 0 - if (record->event.pressed) { - rgb_anykey_timer = 0; - } + rgb_anykey_timer = 0; #endif // RGB_DISABLE_TIMEOUT > 0 #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED @@ -196,12 +197,12 @@ bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { uint8_t led_count = 0; # if defined(RGB_MATRIX_KEYRELEASES) - if (!record->event.pressed) + if (!pressed) # elif defined(RGB_MATRIX_KEYPRESSES) - if (record->event.pressed) + if (pressed) # endif // defined(RGB_MATRIX_KEYRELEASES) { - led_count = rgb_matrix_map_row_column_to_led(record->event.key.row, record->event.key.col, led); + led_count = rgb_matrix_map_row_column_to_led(row, col, led); } if (last_hit_buffer.count + led_count > LED_HITS_TO_REMEMBER) { @@ -224,11 +225,9 @@ bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { #if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_TYPING_HEATMAP) if (rgb_matrix_config.mode == RGB_MATRIX_TYPING_HEATMAP) { - process_rgb_matrix_typing_heatmap(record); + process_rgb_matrix_typing_heatmap(row, col); } #endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_TYPING_HEATMAP) - - return true; } void rgb_matrix_test(void) { diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index 8c80c1bff0c..bb8bcfab68c 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -98,7 +98,7 @@ uint8_t rgb_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *l void rgb_matrix_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue); -bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record); +void process_rgb_matrix(uint8_t row, uint8_t col, bool pressed); void rgb_matrix_task(void); diff --git a/quantum/rgb_matrix_animations/typing_heatmap_anim.h b/quantum/rgb_matrix_animations/typing_heatmap_anim.h index e06437bf765..e7dda11a2f2 100644 --- a/quantum/rgb_matrix_animations/typing_heatmap_anim.h +++ b/quantum/rgb_matrix_animations/typing_heatmap_anim.h @@ -6,9 +6,7 @@ RGB_MATRIX_EFFECT(TYPING_HEATMAP) # define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 25 # endif -void process_rgb_matrix_typing_heatmap(keyrecord_t* record) { - uint8_t row = record->event.key.row; - uint8_t col = record->event.key.col; +void process_rgb_matrix_typing_heatmap(uint8_t row, uint8_t col) { uint8_t m_row = row - 1; uint8_t p_row = row + 1; uint8_t m_col = col - 1; diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index bad762b4935..d6636b886ad 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -257,7 +257,7 @@ bool matrix_post_scan(void) { static uint8_t error_count; matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; - if (!transport_master(slave_matrix)) { + if (!transport_master(matrix + thisHand, slave_matrix)) { error_count++; if (error_count > ERROR_DISCONNECT_COUNT) { @@ -282,7 +282,7 @@ bool matrix_post_scan(void) { matrix_scan_quantum(); } else { - transport_slave(matrix + thisHand); + transport_slave(matrix + thatHand, matrix + thisHand); matrix_slave_scan_user(); } diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index b45ba92c3b6..977b5dc33ee 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -30,6 +30,9 @@ static pin_t encoders_pad[] = ENCODERS_PAD_A; typedef struct _I2C_slave_buffer_t { # ifndef DISABLE_SYNC_TIMER uint32_t sync_timer; +# endif +# ifdef SPLIT_TRANSPORT_MIRROR + matrix_row_t mmatrix[ROWS_PER_HAND]; # endif matrix_row_t smatrix[ROWS_PER_HAND]; # ifdef SPLIT_MODS_ENABLE @@ -56,7 +59,8 @@ typedef struct _I2C_slave_buffer_t { static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; # define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer) -# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) +# define I2C_KEYMAP_MASTER_START offsetof(I2C_slave_buffer_t, mmatrix) +# define I2C_KEYMAP_SLAVE_START offsetof(I2C_slave_buffer_t, smatrix) # define I2C_REAL_MODS_START offsetof(I2C_slave_buffer_t, real_mods) # define I2C_WEAK_MODS_START offsetof(I2C_slave_buffer_t, weak_mods) # define I2C_ONESHOT_MODS_START offsetof(I2C_slave_buffer_t, oneshot_mods) @@ -72,8 +76,11 @@ static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_re # endif // Get rows from other half over i2c -bool transport_master(matrix_row_t matrix[]) { - i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT); +bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_SLAVE_START, (void *)slave_matrix, sizeof(i2c_buffer->smatrix), TIMEOUT); +#ifdef SPLIT_TRANSPORT_MIRROR + i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_MASTER_START, (void *)master_matrix, sizeof(i2c_buffer->mmatrix), TIMEOUT); +#endif // write backlight info # ifdef BACKLIGHT_ENABLE @@ -141,12 +148,15 @@ bool transport_master(matrix_row_t matrix[]) { return true; } -void transport_slave(matrix_row_t matrix[]) { +void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { # ifndef DISABLE_SYNC_TIMER sync_timer_update(i2c_buffer->sync_timer); # endif // Copy matrix to I2C buffer - memcpy((void *)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix)); + memcpy((void*)i2c_buffer->smatrix, (void *)slave_matrix, sizeof(i2c_buffer->smatrix)); +#ifdef SPLIT_TRANSPORT_MIRROR + memcpy((void*)master_matrix, (void *)i2c_buffer->mmatrix, sizeof(i2c_buffer->mmatrix)); +#endif // Read Backlight Info # ifdef BACKLIGHT_ENABLE @@ -207,6 +217,9 @@ typedef struct _Serial_m2s_buffer_t { # ifndef DISABLE_SYNC_TIMER uint32_t sync_timer; # endif +# ifdef SPLIT_TRANSPORT_MIRROR + matrix_row_t mmatrix[ROWS_PER_HAND]; +# endif # ifdef BACKLIGHT_ENABLE uint8_t backlight_level; # endif @@ -289,7 +302,7 @@ void transport_rgblight_slave(void) { # define transport_rgblight_slave() # endif -bool transport_master(matrix_row_t matrix[]) { +bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { # ifndef SERIAL_USE_MULTI_TRANSACTION if (soft_serial_transaction() != TRANSACTION_END) { return false; @@ -303,7 +316,10 @@ bool transport_master(matrix_row_t matrix[]) { // TODO: if MATRIX_COLS > 8 change to unpack() for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[i] = serial_s2m_buffer.smatrix[i]; + slave_matrix[i] = serial_s2m_buffer.smatrix[i]; +#ifdef SPLIT_TRANSPORT_MIRROR + serial_m2s_buffer.mmatrix[i] = master_matrix[i]; +#endif } # ifdef BACKLIGHT_ENABLE @@ -333,7 +349,7 @@ bool transport_master(matrix_row_t matrix[]) { return true; } -void transport_slave(matrix_row_t matrix[]) { +void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { transport_rgblight_slave(); # ifndef DISABLE_SYNC_TIMER sync_timer_update(serial_m2s_buffer.sync_timer); @@ -341,7 +357,10 @@ void transport_slave(matrix_row_t matrix[]) { // TODO: if MATRIX_COLS > 8 change to pack() for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_s2m_buffer.smatrix[i] = matrix[i]; + serial_s2m_buffer.smatrix[i] = slave_matrix[i]; +#ifdef SPLIT_TRANSPORT_MIRROR + master_matrix[i] = serial_m2s_buffer.mmatrix[i]; +#endif } # ifdef BACKLIGHT_ENABLE backlight_set(serial_m2s_buffer.backlight_level); diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index c667bfab853..a9f66301bf6 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -6,5 +6,5 @@ void transport_master_init(void); void transport_slave_init(void); // returns false if valid data not received from slave -bool transport_master(matrix_row_t matrix[]); -void transport_slave(matrix_row_t matrix[]); +bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]); +void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]); diff --git a/tmk_core/common/eeconfig.h b/tmk_core/common/eeconfig.h index c4f0483913a..d66c4199c26 100644 --- a/tmk_core/common/eeconfig.h +++ b/tmk_core/common/eeconfig.h @@ -21,7 +21,7 @@ along with this program. If not, see . #include #ifndef EECONFIG_MAGIC_NUMBER -# define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEEC +# define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEEB // When changing, decrement this value to avoid future re-init issues #endif #define EECONFIG_MAGIC_NUMBER_OFF (uint16_t)0xFFFF diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 299bda2c127..34fed0caba8 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -54,6 +54,9 @@ along with this program. If not, see . #ifdef RGBLIGHT_ENABLE # include "rgblight.h" #endif +#ifdef RGB_MATRIX_ENABLE +# include "rgb_matrix.h" +#endif #ifdef ENCODER_ENABLE # include "encoder.h" #endif @@ -304,6 +307,9 @@ void keyboard_init(void) { #ifdef RGBLIGHT_ENABLE rgblight_init(); #endif +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init(); +#endif #ifdef ENCODER_ENABLE encoder_init(); #endif @@ -328,6 +334,17 @@ void keyboard_init(void) { keyboard_post_init_kb(); /* Always keep this last */ } +/** \brief key_event_task + * + * This function is responsible for calling into other systems when they need to respond to electrical switch press events. + * This is differnet than keycode events as no layer processing, or filtering occurs. + */ +void switch_events(uint8_t row, uint8_t col, bool pressed) { +#if defined(RGB_MATRIX_ENABLE) + process_rgb_matrix(row, col, pressed); +#endif +} + /** \brief Keyboard task: Do keyboard routine jobs * * Do routine keyboard jobs: @@ -358,32 +375,35 @@ void keyboard_task(void) { uint8_t matrix_changed = matrix_scan(); if (matrix_changed) last_matrix_activity_trigger(); - if (should_process_keypress()) { - for (uint8_t r = 0; r < MATRIX_ROWS; r++) { - matrix_row = matrix_get_row(r); - matrix_change = matrix_row ^ matrix_prev[r]; - if (matrix_change) { + for (uint8_t r = 0; r < MATRIX_ROWS; r++) { + matrix_row = matrix_get_row(r); + matrix_change = matrix_row ^ matrix_prev[r]; + if (matrix_change) { #ifdef MATRIX_HAS_GHOST - if (has_ghost_in_row(r, matrix_row)) { - continue; - } + if (has_ghost_in_row(r, matrix_row)) { + continue; + } #endif - if (debug_matrix) matrix_print(); - matrix_row_t col_mask = 1; - for (uint8_t c = 0; c < MATRIX_COLS; c++, col_mask <<= 1) { - if (matrix_change & col_mask) { + if (debug_matrix) matrix_print(); + matrix_row_t col_mask = 1; + for (uint8_t c = 0; c < MATRIX_COLS; c++, col_mask <<= 1) { + if (matrix_change & col_mask) { + if (should_process_keypress()) { action_exec((keyevent_t){ .key = (keypos_t){.row = r, .col = c}, .pressed = (matrix_row & col_mask), .time = (timer_read() | 1) /* time should not be 0 */ }); - // record a processed key - matrix_prev[r] ^= col_mask; -#ifdef QMK_KEYS_PER_SCAN - // only jump out if we have processed "enough" keys. - if (++keys_processed >= QMK_KEYS_PER_SCAN) -#endif - // process a key per task call - goto MATRIX_LOOP_END; } + // record a processed key + matrix_prev[r] ^= col_mask; + + switch_events(r, c, (matrix_row & col_mask)); + +#ifdef QMK_KEYS_PER_SCAN + // only jump out if we have processed "enough" keys. + if (++keys_processed >= QMK_KEYS_PER_SCAN) +#endif + // process a key per task call + goto MATRIX_LOOP_END; } } } @@ -405,6 +425,10 @@ MATRIX_LOOP_END: rgblight_task(); #endif +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_task(); +#endif + #if defined(BACKLIGHT_ENABLE) # if defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS) backlight_task(); From b0e161e33d8ec030c6965daa57a76ec70b1a1122 Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Tue, 16 Feb 2021 11:33:03 +1100 Subject: [PATCH 130/145] Format code according to conventions (#11928) Co-authored-by: QMK Bot --- quantum/split_common/transport.c | 36 ++++++++++++++++---------------- tmk_core/common/eeconfig.h | 2 +- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index 977b5dc33ee..61b61ea08cf 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -78,9 +78,9 @@ static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_re // Get rows from other half over i2c bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_SLAVE_START, (void *)slave_matrix, sizeof(i2c_buffer->smatrix), TIMEOUT); -#ifdef SPLIT_TRANSPORT_MIRROR +# ifdef SPLIT_TRANSPORT_MIRROR i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_MASTER_START, (void *)master_matrix, sizeof(i2c_buffer->mmatrix), TIMEOUT); -#endif +# endif // write backlight info # ifdef BACKLIGHT_ENABLE @@ -153,10 +153,10 @@ void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) sync_timer_update(i2c_buffer->sync_timer); # endif // Copy matrix to I2C buffer - memcpy((void*)i2c_buffer->smatrix, (void *)slave_matrix, sizeof(i2c_buffer->smatrix)); -#ifdef SPLIT_TRANSPORT_MIRROR - memcpy((void*)master_matrix, (void *)i2c_buffer->mmatrix, sizeof(i2c_buffer->mmatrix)); -#endif + memcpy((void *)i2c_buffer->smatrix, (void *)slave_matrix, sizeof(i2c_buffer->smatrix)); +# ifdef SPLIT_TRANSPORT_MIRROR + memcpy((void *)master_matrix, (void *)i2c_buffer->mmatrix, sizeof(i2c_buffer->mmatrix)); +# endif // Read Backlight Info # ifdef BACKLIGHT_ENABLE @@ -208,23 +208,23 @@ typedef struct _Serial_s2m_buffer_t { typedef struct _Serial_m2s_buffer_t { # ifdef SPLIT_MODS_ENABLE - uint8_t real_mods; - uint8_t weak_mods; + uint8_t real_mods; + uint8_t weak_mods; # ifndef NO_ACTION_ONESHOT - uint8_t oneshot_mods; + uint8_t oneshot_mods; # endif # endif # ifndef DISABLE_SYNC_TIMER - uint32_t sync_timer; + uint32_t sync_timer; # endif # ifdef SPLIT_TRANSPORT_MIRROR matrix_row_t mmatrix[ROWS_PER_HAND]; # endif # ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; + uint8_t backlight_level; # endif # ifdef WPM_ENABLE - uint8_t current_wpm; + uint8_t current_wpm; # endif } Serial_m2s_buffer_t; @@ -316,10 +316,10 @@ bool transport_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) // TODO: if MATRIX_COLS > 8 change to unpack() for (int i = 0; i < ROWS_PER_HAND; ++i) { - slave_matrix[i] = serial_s2m_buffer.smatrix[i]; -#ifdef SPLIT_TRANSPORT_MIRROR + slave_matrix[i] = serial_s2m_buffer.smatrix[i]; +# ifdef SPLIT_TRANSPORT_MIRROR serial_m2s_buffer.mmatrix[i] = master_matrix[i]; -#endif +# endif } # ifdef BACKLIGHT_ENABLE @@ -358,9 +358,9 @@ void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) // TODO: if MATRIX_COLS > 8 change to pack() for (int i = 0; i < ROWS_PER_HAND; ++i) { serial_s2m_buffer.smatrix[i] = slave_matrix[i]; -#ifdef SPLIT_TRANSPORT_MIRROR - master_matrix[i] = serial_m2s_buffer.mmatrix[i]; -#endif +# ifdef SPLIT_TRANSPORT_MIRROR + master_matrix[i] = serial_m2s_buffer.mmatrix[i]; +# endif } # ifdef BACKLIGHT_ENABLE backlight_set(serial_m2s_buffer.backlight_level); diff --git a/tmk_core/common/eeconfig.h b/tmk_core/common/eeconfig.h index d66c4199c26..86b9e6f99bf 100644 --- a/tmk_core/common/eeconfig.h +++ b/tmk_core/common/eeconfig.h @@ -21,7 +21,7 @@ along with this program. If not, see . #include #ifndef EECONFIG_MAGIC_NUMBER -# define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEEB // When changing, decrement this value to avoid future re-init issues +# define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEEB // When changing, decrement this value to avoid future re-init issues #endif #define EECONFIG_MAGIC_NUMBER_OFF (uint16_t)0xFFFF From 53b96f685d3399e1281747b11a1194178089706c Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 17 Feb 2021 02:51:28 +1100 Subject: [PATCH 131/145] RGBLight: Allow configurable default settings (#11912) * RGBLight: Allow configurable default settings * Docs --- docs/feature_rgblight.md | 23 ++++++++++++++--------- quantum/rgblight.c | 30 +++++++++++++++++++++++++----- 2 files changed, 39 insertions(+), 14 deletions(-) diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index b5a2b179d60..d2612a6d1bb 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -82,15 +82,20 @@ Changing the **Value** sets the overall brightness.
Your RGB lighting can be configured by placing these `#define`s in your `config.h`: -|Define |Default |Description | -|---------------------|-------------|-----------------------------------------------------------------------------| -|`RGBLIGHT_HUE_STEP` |`10` |The number of steps to cycle through the hue by | -|`RGBLIGHT_SAT_STEP` |`17` |The number of steps to increment the saturation by | -|`RGBLIGHT_VAL_STEP` |`17` |The number of steps to increment the brightness by | -|`RGBLIGHT_LIMIT_VAL` |`255` |The maximum brightness level | -|`RGBLIGHT_SLEEP` |*Not defined*|If defined, the RGB lighting will be switched off when the host goes to sleep| -|`RGBLIGHT_SPLIT` |*Not defined*|If defined, synchronization functionality for split keyboards is added| -|`RGBLIGHT_DISABLE_KEYCODES`|*not defined*|If defined, disables the ability to control RGB Light from the keycodes. You must use code functions to control the feature| +|Define |Default |Description | +|---------------------------|----------------------------|---------------------------------------------------------------------------------------------------------------------------| +|`RGBLIGHT_HUE_STEP` |`10` |The number of steps to cycle through the hue by | +|`RGBLIGHT_SAT_STEP` |`17` |The number of steps to increment the saturation by | +|`RGBLIGHT_VAL_STEP` |`17` |The number of steps to increment the brightness by | +|`RGBLIGHT_LIMIT_VAL` |`255` |The maximum brightness level | +|`RGBLIGHT_SLEEP` |*Not defined* |If defined, the RGB lighting will be switched off when the host goes to sleep | +|`RGBLIGHT_SPLIT` |*Not defined* |If defined, synchronization functionality for split keyboards is added | +|`RGBLIGHT_DISABLE_KEYCODES`|*Not defined* |If defined, disables the ability to control RGB Light from the keycodes. You must use code functions to control the feature| +|`RGBLIGHT_DEFAULT_MODE` |`RGBLIGHT_MODE_STATIC_LIGHT`|The default mode to use upon clearing the EEPROM | +|`RGBLIGHT_DEFAULT_HUE` |`0` (red) |The default hue to use upon clearing the EEPROM | +|`RGBLIGHT_DEFAULT_SAT` |`UINT8_MAX` (255) |The default saturation to use upon clearing the EEPROM | +|`RGBLIGHT_DEFAULT_VAL` |`RGBLIGHT_LIMIT_VAL` |The default value (brightness) to use upon clearing the EEPROM | +|`RGBLIGHT_DEFAULT_SPD` |`0` |The default speed to use upon clearing the EEPROM | ## Effects and Animations diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 7d7d015ba0a..904c02d6cd9 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -84,6 +84,26 @@ static uint8_t mode_base_table[] = { #include "rgblight_modes.h" }; +#if !defined(RGBLIGHT_DEFAULT_MODE) +# define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT +#endif + +#if !defined(RGBLIGHT_DEFAULT_HUE) +# define RGBLIGHT_DEFAULT_HUE 0 +#endif + +#if !defined(RGBLIGHT_DEFAULT_SAT) +# define RGBLIGHT_DEFAULT_SAT UINT8_MAX +#endif + +#if !defined(RGBLIGHT_DEFAULT_VAL) +# define RGBLIGHT_DEFAULT_VAL RGBLIGHT_LIMIT_VAL +#endif + +#if !defined(RGBLIGHT_DEFAULT_SPD) +# define RGBLIGHT_DEFAULT_SPD 0 +#endif + static inline int is_static_effect(uint8_t mode) { return memchr(static_effect_table, mode, sizeof(static_effect_table)) != NULL; } #ifdef RGBLIGHT_LED_MAP @@ -183,11 +203,11 @@ void eeconfig_update_rgblight_current(void) { eeconfig_update_rgblight(rgblight_ void eeconfig_update_rgblight_default(void) { rgblight_config.enable = 1; - rgblight_config.mode = RGBLIGHT_MODE_STATIC_LIGHT; - rgblight_config.hue = 0; - rgblight_config.sat = UINT8_MAX; - rgblight_config.val = RGBLIGHT_LIMIT_VAL; - rgblight_config.speed = 0; + rgblight_config.mode = RGBLIGHT_DEFAULT_MODE; + rgblight_config.hue = RGBLIGHT_DEFAULT_HUE; + rgblight_config.sat = RGBLIGHT_DEFAULT_SAT; + rgblight_config.val = RGBLIGHT_DEFAULT_VAL; + rgblight_config.speed = RGBLIGHT_DEFAULT_SPD; RGBLIGHT_SPLIT_SET_CHANGE_MODEHSVS; eeconfig_update_rgblight(rgblight_config.raw); } From 3345ce268610edbca8f53bc2909c547485531603 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 17 Feb 2021 07:26:52 +1100 Subject: [PATCH 132/145] Add `tap_code_delay(code, delay)` (#11913) Co-authored-by: Drashna Jaelre --- docs/feature_macros.md | 10 ++++++++-- tmk_core/common/action.c | 23 ++++++++++++++--------- tmk_core/common/action.h | 1 + 3 files changed, 23 insertions(+), 11 deletions(-) diff --git a/docs/feature_macros.md b/docs/feature_macros.md index aa1ebc337a0..6e69ad642cf 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -233,9 +233,15 @@ Parallel to `register_code` function, this sends the `` keyup event to the c ### `tap_code();` -This will send `register_code()` and then `unregister_code()`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it). +Sends `register_code()` and then `unregister_code()`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it). -If you're having issues with taps (un)registering, you can add a delay between the register and unregister events by setting `#define TAP_CODE_DELAY 100` in your `config.h` file. The value is in milliseconds. +If `TAP_CODE_DELAY` is defined (default 0), this function waits that many milliseconds before calling `unregister_code()`. This can be useful when you are having issues with taps (un)registering. + +If the keycode is `KC_CAPS`, it waits `TAP_HOLD_CAPS_DELAY` milliseconds instead (default 80), as macOS prevents accidental Caps Lock activation by waiting for the key to be held for a certain amount of time. + +### `tap_code_delay(, );` + +Like `tap_code()`, but with a `delay` parameter for specifying arbitrary intervals before sending the unregister event. ### `register_code16();`, `unregister_code16();` and `tap_code16();` diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index e4a97e0bc1a..74bfc06264a 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -940,18 +940,23 @@ void unregister_code(uint8_t code) { #endif } -/** \brief Utilities for actions. (FIXME: Needs better description) +/** \brief Tap a keycode with a delay. * - * FIXME: Needs documentation. + * \param code The basic keycode to tap. + * \param delay The amount of time in milliseconds to leave the keycode registered, before unregistering it. + */ +void tap_code_delay(uint8_t code, uint16_t delay) { + register_code(code); + wait_ms(delay); + unregister_code(code); +} + +/** \brief Tap a keycode with the default delay. + * + * \param code The basic keycode to tap. If `code` is `KC_CAPS`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. */ void tap_code(uint8_t code) { - register_code(code); - if (code == KC_CAPS) { - wait_ms(TAP_HOLD_CAPS_DELAY); - } else { - wait_ms(TAP_CODE_DELAY); - } - unregister_code(code); + tap_code_delay(code, code == KC_CAPS ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately. diff --git a/tmk_core/common/action.h b/tmk_core/common/action.h index 81cd54369c0..9a991de1c2b 100644 --- a/tmk_core/common/action.h +++ b/tmk_core/common/action.h @@ -100,6 +100,7 @@ void process_action(keyrecord_t *record, action_t action); void register_code(uint8_t code); void unregister_code(uint8_t code); void tap_code(uint8_t code); +void tap_code_delay(uint8_t code, uint16_t delay); void register_mods(uint8_t mods); void unregister_mods(uint8_t mods); void register_weak_mods(uint8_t mods); From be70f466fef0a5248bf0f6b8003d2f5e7b81eec8 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 17 Feb 2021 17:26:57 +1100 Subject: [PATCH 133/145] Fix compilation error for `tap_code_delay()` (#11938) --- tmk_core/common/action.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index 74bfc06264a..66e7e10026c 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -947,7 +947,9 @@ void unregister_code(uint8_t code) { */ void tap_code_delay(uint8_t code, uint16_t delay) { register_code(code); - wait_ms(delay); + for (uint16_t i = delay; i > 0; i--) { + wait_ms(1); + } unregister_code(code); } From a5f63dbf93a19efc5c8e16f80eec79d988d3a1d1 Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Wed, 17 Feb 2021 17:30:16 +1100 Subject: [PATCH 134/145] Format code according to conventions (#11936) Co-authored-by: QMK Bot --- tmk_core/common/action.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index 66e7e10026c..66411b4fd3c 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -957,9 +957,7 @@ void tap_code_delay(uint8_t code, uint16_t delay) { * * \param code The basic keycode to tap. If `code` is `KC_CAPS`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. */ -void tap_code(uint8_t code) { - tap_code_delay(code, code == KC_CAPS ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); -} +void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately. * From 7ab9f6a1010108c329f6880fe08716dd06a90daf Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 20 Feb 2021 18:11:02 +1100 Subject: [PATCH 135/145] Output selection: Remove "USB and BT" option (#11940) --- tmk_core/protocol/lufa/lufa.c | 21 +++------------------ tmk_core/protocol/lufa/outputselect.h | 14 ++------------ 2 files changed, 5 insertions(+), 30 deletions(-) diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index bd9daaac903..f1908b3d075 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -671,9 +671,7 @@ static void send_keyboard(report_keyboard_t *report) { uint8_t timeout = 255; #ifdef BLUETOOTH_ENABLE - uint8_t where = where_to_send(); - - if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); # elif MODULE_RN42 @@ -686,9 +684,6 @@ static void send_keyboard(report_keyboard_t *report) { serial_send(report->keys[i]); } # endif - } - - if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) { return; } #endif @@ -729,9 +724,7 @@ static void send_mouse(report_mouse_t *report) { uint8_t timeout = 255; # ifdef BLUETOOTH_ENABLE - uint8_t where = where_to_send(); - - if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef MODULE_ADAFRUIT_BLE // FIXME: mouse buttons adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons); @@ -746,9 +739,6 @@ static void send_mouse(report_mouse_t *report) { serial_send(report->h); // should try sending the wheel h here serial_send(0x00); # endif - } - - if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) { return; } # endif @@ -807,9 +797,7 @@ static void send_system(uint16_t data) { static void send_consumer(uint16_t data) { #ifdef EXTRAKEY_ENABLE # ifdef BLUETOOTH_ENABLE - uint8_t where = where_to_send(); - - if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) { + if (where_to_send() == OUTPUT_BLUETOOTH) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_consumer_key(data); # elif MODULE_RN42 @@ -823,9 +811,6 @@ static void send_consumer(uint16_t data) { serial_send(bitmap & 0xFF); serial_send((bitmap >> 8) & 0xFF); # endif - } - - if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) { return; } # endif diff --git a/tmk_core/protocol/lufa/outputselect.h b/tmk_core/protocol/lufa/outputselect.h index 7f7ed00b954..c4548e1122a 100644 --- a/tmk_core/protocol/lufa/outputselect.h +++ b/tmk_core/protocol/lufa/outputselect.h @@ -21,21 +21,11 @@ enum outputs { OUTPUT_NONE, OUTPUT_USB, - OUTPUT_BLUETOOTH, - - // backward compatibility - OUTPUT_USB_AND_BT + OUTPUT_BLUETOOTH }; -/** - * backward compatibility for BLUETOOTH_ENABLE, send to BT and USB by default - */ #ifndef OUTPUT_DEFAULT -# ifdef BLUETOOTH_ENABLE -# define OUTPUT_DEFAULT OUTPUT_USB_AND_BT -# else -# define OUTPUT_DEFAULT OUTPUT_AUTO -# endif +# define OUTPUT_DEFAULT OUTPUT_AUTO #endif void set_output(uint8_t output); From c4bd6af837ada55cd3cbc21f0e50d6a2d620bcf8 Mon Sep 17 00:00:00 2001 From: Liyang HU Date: Sat, 20 Feb 2021 19:53:53 +0000 Subject: [PATCH 136/145] tmk_core/common/action.c: refactor for code size; merge multiple `case`s into one (#11943) * tmk_core/common/report.h: define `enum mouse_buttons` in terms of `#define MOUSE_BTN_MASK()` * tmk_core/common/action.c: collapse multiple `case KC_MS_BTN[1-8]:` into single `MOUSE_BTN_MASK(action.key.code - KC_MS_BTN1)` We all love tapping on our keyboards but this is taking the piss. This saves ~134 bytes on my ATmega32. --- tmk_core/common/action.c | 76 +++++++--------------------------------- tmk_core/common/report.h | 17 ++++----- 2 files changed, 21 insertions(+), 72 deletions(-) diff --git a/tmk_core/common/action.c b/tmk_core/common/action.c index 66411b4fd3c..f53e3c70844 100644 --- a/tmk_core/common/action.c +++ b/tmk_core/common/action.c @@ -410,74 +410,22 @@ void process_action(keyrecord_t *record, action_t action) { case ACT_MOUSEKEY: if (event.pressed) { mousekey_on(action.key.code); - switch (action.key.code) { -# if defined(PS2_MOUSE_ENABLE) || defined(POINTING_DEVICE_ENABLE) - case KC_MS_BTN1: - register_button(true, MOUSE_BTN1); - break; - case KC_MS_BTN2: - register_button(true, MOUSE_BTN2); - break; - case KC_MS_BTN3: - register_button(true, MOUSE_BTN3); - break; -# endif -# ifdef POINTING_DEVICE_ENABLE - case KC_MS_BTN4: - register_button(true, MOUSE_BTN4); - break; - case KC_MS_BTN5: - register_button(true, MOUSE_BTN5); - break; - case KC_MS_BTN6: - register_button(true, MOUSE_BTN6); - break; - case KC_MS_BTN7: - register_button(true, MOUSE_BTN7); - break; - case KC_MS_BTN8: - register_button(true, MOUSE_BTN8); - break; -# endif - default: - mousekey_send(); - break; - } } else { mousekey_off(action.key.code); - switch (action.key.code) { + } + switch (action.key.code) { # if defined(PS2_MOUSE_ENABLE) || defined(POINTING_DEVICE_ENABLE) - case KC_MS_BTN1: - register_button(false, MOUSE_BTN1); - break; - case KC_MS_BTN2: - register_button(false, MOUSE_BTN2); - break; - case KC_MS_BTN3: - register_button(false, MOUSE_BTN3); - break; +# ifdef POINTING_DEVICE_ENABLE + case KC_MS_BTN1 ... KC_MS_BTN8: +# else + case KC_MS_BTN1 ... KC_MS_BTN3: +# endif + register_button(event.pressed, MOUSE_BTN_MASK(action.key.code - KC_MS_BTN1)); + break; # endif -# ifdef POINTING_DEVICE_ENABLE - case KC_MS_BTN4: - register_button(false, MOUSE_BTN4); - break; - case KC_MS_BTN5: - register_button(false, MOUSE_BTN5); - break; - case KC_MS_BTN6: - register_button(false, MOUSE_BTN6); - break; - case KC_MS_BTN7: - register_button(false, MOUSE_BTN7); - break; - case KC_MS_BTN8: - register_button(false, MOUSE_BTN8); - break; -# endif - default: - mousekey_send(); - break; - } + default: + mousekey_send(); + break; } break; #endif diff --git a/tmk_core/common/report.h b/tmk_core/common/report.h index bcf5cab388d..606a2596436 100644 --- a/tmk_core/common/report.h +++ b/tmk_core/common/report.h @@ -34,15 +34,16 @@ enum hid_report_ids { }; /* Mouse buttons */ +#define MOUSE_BTN_MASK(n) (1 << (n)) enum mouse_buttons { - MOUSE_BTN1 = (1 << 0), - MOUSE_BTN2 = (1 << 1), - MOUSE_BTN3 = (1 << 2), - MOUSE_BTN4 = (1 << 3), - MOUSE_BTN5 = (1 << 4), - MOUSE_BTN6 = (1 << 5), - MOUSE_BTN7 = (1 << 6), - MOUSE_BTN8 = (1 << 7) + MOUSE_BTN1 = MOUSE_BTN_MASK(0), + MOUSE_BTN2 = MOUSE_BTN_MASK(1), + MOUSE_BTN3 = MOUSE_BTN_MASK(2), + MOUSE_BTN4 = MOUSE_BTN_MASK(3), + MOUSE_BTN5 = MOUSE_BTN_MASK(4), + MOUSE_BTN6 = MOUSE_BTN_MASK(5), + MOUSE_BTN7 = MOUSE_BTN_MASK(6), + MOUSE_BTN8 = MOUSE_BTN_MASK(7) }; /* Consumer Page (0x0C) From f6de4085a099073dd0277691ec5aa3aaa1998a91 Mon Sep 17 00:00:00 2001 From: mkdl <56965481+mkdl@users.noreply.github.com> Date: Sun, 21 Feb 2021 05:06:51 +0100 Subject: [PATCH 137/145] added unix60, moved togehter with southpaw75 into fr4 folder (#11195) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> --- keyboards/{ => fr4}/southpaw75/config.h | 0 keyboards/{ => fr4}/southpaw75/info.json | 0 .../southpaw75/keymaps/default/keymap.c | 0 keyboards/{ => fr4}/southpaw75/readme.md | 0 keyboards/{ => fr4}/southpaw75/rules.mk | 0 keyboards/{ => fr4}/southpaw75/southpaw75.c | 0 keyboards/{ => fr4}/southpaw75/southpaw75.h | 0 keyboards/fr4/unix60/config.h | 42 +++++++++++++++++++ keyboards/fr4/unix60/info.json | 12 ++++++ keyboards/fr4/unix60/keymaps/default/keymap.c | 38 +++++++++++++++++ keyboards/fr4/unix60/readme.md | 15 +++++++ keyboards/fr4/unix60/rules.mk | 22 ++++++++++ keyboards/fr4/unix60/unix60.c | 17 ++++++++ keyboards/fr4/unix60/unix60.h | 36 ++++++++++++++++ 14 files changed, 182 insertions(+) rename keyboards/{ => fr4}/southpaw75/config.h (100%) rename keyboards/{ => fr4}/southpaw75/info.json (100%) rename keyboards/{ => fr4}/southpaw75/keymaps/default/keymap.c (100%) rename keyboards/{ => fr4}/southpaw75/readme.md (100%) rename keyboards/{ => fr4}/southpaw75/rules.mk (100%) rename keyboards/{ => fr4}/southpaw75/southpaw75.c (100%) rename keyboards/{ => fr4}/southpaw75/southpaw75.h (100%) create mode 100644 keyboards/fr4/unix60/config.h create mode 100644 keyboards/fr4/unix60/info.json create mode 100644 keyboards/fr4/unix60/keymaps/default/keymap.c create mode 100644 keyboards/fr4/unix60/readme.md create mode 100644 keyboards/fr4/unix60/rules.mk create mode 100644 keyboards/fr4/unix60/unix60.c create mode 100644 keyboards/fr4/unix60/unix60.h diff --git a/keyboards/southpaw75/config.h b/keyboards/fr4/southpaw75/config.h similarity index 100% rename from keyboards/southpaw75/config.h rename to keyboards/fr4/southpaw75/config.h diff --git a/keyboards/southpaw75/info.json b/keyboards/fr4/southpaw75/info.json similarity index 100% rename from keyboards/southpaw75/info.json rename to keyboards/fr4/southpaw75/info.json diff --git a/keyboards/southpaw75/keymaps/default/keymap.c b/keyboards/fr4/southpaw75/keymaps/default/keymap.c similarity index 100% rename from keyboards/southpaw75/keymaps/default/keymap.c rename to keyboards/fr4/southpaw75/keymaps/default/keymap.c diff --git a/keyboards/southpaw75/readme.md b/keyboards/fr4/southpaw75/readme.md similarity index 100% rename from keyboards/southpaw75/readme.md rename to keyboards/fr4/southpaw75/readme.md diff --git a/keyboards/southpaw75/rules.mk b/keyboards/fr4/southpaw75/rules.mk similarity index 100% rename from keyboards/southpaw75/rules.mk rename to keyboards/fr4/southpaw75/rules.mk diff --git a/keyboards/southpaw75/southpaw75.c b/keyboards/fr4/southpaw75/southpaw75.c similarity index 100% rename from keyboards/southpaw75/southpaw75.c rename to keyboards/fr4/southpaw75/southpaw75.c diff --git a/keyboards/southpaw75/southpaw75.h b/keyboards/fr4/southpaw75/southpaw75.h similarity index 100% rename from keyboards/southpaw75/southpaw75.h rename to keyboards/fr4/southpaw75/southpaw75.h diff --git a/keyboards/fr4/unix60/config.h b/keyboards/fr4/unix60/config.h new file mode 100644 index 00000000000..53d2104fdde --- /dev/null +++ b/keyboards/fr4/unix60/config.h @@ -0,0 +1,42 @@ + /* + Copyright 2020 Lasse Küchenmeister + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4652 // "FR" +#define PRODUCT_ID 0x5558 // "UX" +#define DEVICE_VER 0x0001 +#define MANUFACTURER FR4Boards +#define PRODUCT unix60 + +/* key matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 9 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D3, D2, D1, D0, D4, C6, D7 } +#define MATRIX_COL_PINS { E6, B4, B5, F4, F5, F6, F7, B1, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 diff --git a/keyboards/fr4/unix60/info.json b/keyboards/fr4/unix60/info.json new file mode 100644 index 00000000000..04b2cf62d56 --- /dev/null +++ b/keyboards/fr4/unix60/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "unix60", + "url": "https://github.com/mkdl/Unix60", + "maintainer": "mkdl", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":0.6}, {"x":13.6, "y":0, "w":0.8}, {"x":14.4, "y":0, "w":0.6}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}] + } + } +} diff --git a/keyboards/fr4/unix60/keymaps/default/keymap.c b/keyboards/fr4/unix60/keymaps/default/keymap.c new file mode 100644 index 00000000000..0a0a6b97424 --- /dev/null +++ b/keyboards/fr4/unix60/keymaps/default/keymap.c @@ -0,0 +1,38 @@ + /* + Copyright 2020 Lasse Küchenmeister + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_B, KC_BSPC, KC_C, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_A, + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) + ), + + LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F10, KC_F11, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fr4/unix60/readme.md b/keyboards/fr4/unix60/readme.md new file mode 100644 index 00000000000..eab1ee9446d --- /dev/null +++ b/keyboards/fr4/unix60/readme.md @@ -0,0 +1,15 @@ +# Unix60 + +![unix60](https://i.imgur.com/ldvKr90l.jpg) + +HHKB layout FR4 Board + +* Keyboard Maintainer: [mkdl](https://github.com/mkdl/) +* Hardware Supported: Unix60 Pro Micro PCB +* Hardware Availability: https://github.com/mkdl/unix60 + +Make example for this keyboard (after setting up your build environment): + + make unix60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/fr4/unix60/rules.mk b/keyboards/fr4/unix60/rules.mk new file mode 100644 index 00000000000..8a411ac604a --- /dev/null +++ b/keyboards/fr4/unix60/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/fr4/unix60/unix60.c b/keyboards/fr4/unix60/unix60.c new file mode 100644 index 00000000000..80fd383316d --- /dev/null +++ b/keyboards/fr4/unix60/unix60.c @@ -0,0 +1,17 @@ + /* + Copyright 2020 Lasse Küchenmeister + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ +#include "unix60.h" diff --git a/keyboards/fr4/unix60/unix60.h b/keyboards/fr4/unix60/unix60.h new file mode 100644 index 00000000000..fa238da9eb3 --- /dev/null +++ b/keyboards/fr4/unix60/unix60.h @@ -0,0 +1,36 @@ + /* + Copyright 2020 Lasse Küchenmeister + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ +#pragma once + + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \ + K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, \ + K33, K34, K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, \ + K48, K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, \ + K64, K65, K66, K67, K68 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, K63, K64, K65, K66, K67, K68 } \ +} From 316dcf49605be88b24e81ed61e6a7659a6c3892f Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 22 Feb 2021 11:49:13 +1100 Subject: [PATCH 138/145] Clean up some user keymaps specifying MCU (#11966) --- .../keymaps/halfkeyboard/config.h | 78 +-------- .../keymaps/halfkeyboard/rules.mk | 91 +--------- .../evyd13/atom47/keymaps/LEdiodes/rules.mk | 64 ------- keyboards/gh60/revc/keymaps/bluezio/rules.mk | 69 +------- keyboards/gh60/revc/keymaps/dbroqua/config.h | 153 +---------------- keyboards/gh60/revc/keymaps/dbroqua/rules.mk | 109 +----------- .../gh60/revc/keymaps/dbroqua_7U/rules.mk | 108 +----------- .../gh60/revc/keymaps/robotmaxtron/config.h | 156 +----------------- .../gh60/revc/keymaps/robotmaxtron/rules.mk | 108 +----------- keyboards/jj50/keymaps/archetype/rules.mk | 51 ------ .../massdrop/alt/keymaps/reywood/rules.mk | 28 ---- keyboards/planck/keymaps/dodger/config.h | 67 +------- keyboards/planck/keymaps/dodger/rules.mk | 70 +------- .../keymaps/handwired_binaryplease/config.h | 36 +--- .../keymaps/handwired_binaryplease/rules.mk | 72 +------- keyboards/planck/keymaps/kloki/config.h | 7 +- keyboards/planck/keymaps/kloki/rules.mk | 72 +------- keyboards/planck/keymaps/vaire/config.h | 6 +- keyboards/planck/keymaps/vaire/rules.mk | 84 +--------- 19 files changed, 31 insertions(+), 1398 deletions(-) delete mode 100644 keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h b/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h index 2e83f799c7c..bca8571e793 100644 --- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h +++ b/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h @@ -15,65 +15,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef INFINITY_ERGODOX_CONFIG_H -#define INFINITY_ERGODOX_CONFIG_H +#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "QMK" -#define PRODUCT "Infinity keyboard/QMK" - -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_DELAY 0 -#define MOUSEKEY_TIME_TO_MAX 60 -#define MOUSEKEY_MAX_SPEED 7 -#define MOUSEKEY_WHEEL_DELAY 0 - -#define TAPPING_TOGGLE 1 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -#define TAPPING_TERM 200 -#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ - get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ -) - -/* key matrix size */ -#define MATRIX_ROWS 18 -#define MATRIX_COLS 5 -#define LOCAL_MATRIX_ROWS 9 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -#define LED_BRIGHTNESS_LO 100 -#define LED_BRIGHTNESS_HI 255 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -#define SERIAL_LINK_BAUD 562500 -#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) - -#define VISUALIZER_USER_DATA_SIZE 16 /* * music mode options * midi enabled @@ -82,22 +25,3 @@ along with this program. If not, see . * */ #define MUSIC_MASK keycode != KC_NO -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk b/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk index 43a31852956..04cd01b2b7b 100644 --- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk +++ b/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk @@ -1,93 +1,4 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ -# or /ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader -# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX256BLDR8 - -# Startup code to use -# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in /os/hal/boards/ -# or /boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 - -BOOTLOADER = dfu - -# Build Options -# comment out to disable the options. -# - -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = yes # Unicode -SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard -STENO_ENABLE = yes #enable plover steno mode -CUSTOM_MATRIX = yes # Custom matrix file -SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE = yes -LCD_ENABLE = yes -BACKLIGHT_ENABLE = yes -LCD_BACKLIGHT_ENABLE = yes +STENO_ENABLE = yes MIDI_ENABLE = yes MIDI_ADVANCED = yes MUSIC_MODE = yes -RGBLIGHT_ENABLE = no - -LCD_DRIVER = st7565 -LCD_WIDTH = 128 -LCD_HEIGHT = 32 - -LED_DRIVER = is31fl3731c -LED_WIDTH = 7 -LED_HEIGHT = 7 - -LAYOUTS = ergodox diff --git a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk b/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk deleted file mode 100644 index 9334aaf28f7..00000000000 --- a/keyboards/evyd13/atom47/keymaps/LEdiodes/rules.mk +++ /dev/null @@ -1,64 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/gh60/revc/keymaps/bluezio/rules.mk b/keyboards/gh60/revc/keymaps/bluezio/rules.mk index 4b820c974b6..116d505b7ee 100644 --- a/keyboards/gh60/revc/keymaps/bluezio/rules.mk +++ b/keyboards/gh60/revc/keymaps/bluezio/rules.mk @@ -1,68 +1 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -KEY_LOCK_ENABLE = yes # KC_LOCK - -LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift +KEY_LOCK_ENABLE = yes diff --git a/keyboards/gh60/revc/keymaps/dbroqua/config.h b/keyboards/gh60/revc/keymaps/dbroqua/config.h index 5d1a777a4b8..38e5bb0def9 100644 --- a/keyboards/gh60/revc/keymaps/dbroqua/config.h +++ b/keyboards/gh60/revc/keymaps/dbroqua/config.h @@ -15,160 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT GH60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * RGB Underglow - * These settings are for the F4 by default: - * - * - * #define ws2812_pin PF4 - * #define RGBLED_NUM 14 // Number of LEDs - * #define RGBLIGHT_HUE_STEP 10 - * #define RGBLIGHT_SAT_STEP 17 - * #define RGBLIGHT_VAL_STEP 17 - * - * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. - * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. - * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c -*/ +#pragma once #define RGB_DI_PIN F4 +#define RGBLED_NUM 11 #define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 11 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/gh60/revc/keymaps/dbroqua/rules.mk b/keyboards/gh60/revc/keymaps/dbroqua/rules.mk index 21d4b60d961..b56ad10c50d 100644 --- a/keyboards/gh60/revc/keymaps/dbroqua/rules.mk +++ b/keyboards/gh60/revc/keymaps/dbroqua/rules.mk @@ -1,107 +1,2 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB Underglow - +SLEEP_LED_ENABLE = yes +RGBLIGHT_ENABLE = yes diff --git a/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk b/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk index 21192b17941..9e00b7531a2 100644 --- a/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk +++ b/keyboards/gh60/revc/keymaps/dbroqua_7U/rules.mk @@ -1,107 +1 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable RGB Underglow - +SLEEP_LED_ENABLE = yes diff --git a/keyboards/gh60/revc/keymaps/robotmaxtron/config.h b/keyboards/gh60/revc/keymaps/robotmaxtron/config.h index 7cfcf8d453b..955ead1ba2a 100644 --- a/keyboards/gh60/revc/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/revc/keymaps/robotmaxtron/config.h @@ -15,163 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER geekhack -#define PRODUCT GH60 - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -// Rev A -// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 } -// Rev B/C - #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * RGB Underglow - * These settings are for the F4 by default: - * - * - * #define ws2812_pin PF4 - * #define RGBLED_NUM 14 // Number of LEDs - * #define RGBLIGHT_HUE_STEP 10 - * #define RGBLIGHT_SAT_STEP 17 - * #define RGBLIGHT_VAL_STEP 17 - * - * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. - * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. - * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c -*/ +#pragma once #define RGB_DI_PIN F4 +#define RGBLED_NUM 8 #define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk b/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk index b6761ac9ff8..1e3cebb1451 100644 --- a/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk +++ b/keyboards/gh60/revc/keymaps/robotmaxtron/rules.mk @@ -1,107 +1 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -# CONSOLE_ENABLE = yes # Console for debug(+400) -# COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable RGB Underglow - +RGBLIGHT_ENABLE = yes diff --git a/keyboards/jj50/keymaps/archetype/rules.mk b/keyboards/jj50/keymaps/archetype/rules.mk index 9a3c196029f..c77317fdc3c 100644 --- a/keyboards/jj50/keymaps/archetype/rules.mk +++ b/keyboards/jj50/keymaps/archetype/rules.mk @@ -1,55 +1,4 @@ -# Copyright 2017 Luiz Ribeiro -# Modified 2018 Wayne Jones (WarmCatUK) - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = bootloadHID - -# build options -BOOTMAGIC_ENABLE = lite -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = no COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = yes -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes -NKRO_ENABLE = no -# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work TAP_DANCE_ENABLE = yes AUTO_SHIFT_ENABLE = yes - - -DISABLE_WS2812 = no - KEY_LOCK_ENABLE = yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight.c - -LAYOUTS = ortho_5x12 diff --git a/keyboards/massdrop/alt/keymaps/reywood/rules.mk b/keyboards/massdrop/alt/keymaps/reywood/rules.mk index 7e279c182da..57a697a7e72 100644 --- a/keyboards/massdrop/alt/keymaps/reywood/rules.mk +++ b/keyboards/massdrop/alt/keymaps/reywood/rules.mk @@ -1,33 +1,5 @@ # project specific files SRC += rgb_matrix_user.c -#For platform and packs -ARM_ATSAM = SAMD51J18A -MCU = cortex-m4 - -CUSTOM_MATRIX = yes - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -VIRTSER_ENABLE = no # USB Serial Driver -RAW_ENABLE = no # Raw device -AUTO_SHIFT_ENABLE = no # Auto Shift - # This keymap requires Massdrop Configurator support OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/planck/keymaps/dodger/config.h b/keyboards/planck/keymaps/dodger/config.h index 38af37bc051..e0a83f7cbe9 100644 --- a/keyboards/planck/keymaps/dodger/config.h +++ b/keyboards/planck/keymaps/dodger/config.h @@ -15,70 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define MANUFACTURER OLKB -#define PRODUCT Planck - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* Planck PCB default pin-out */ -#define MATRIX_ROW_PINS { D0, D5, B5, B6 } -#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } -#define UNUSED_PINS - -#define QMK_ESC_OUTPUT F1 -#define QMK_ESC_INPUT D5 -#define QMK_LED E6 -#define QMK_SPEAKER C6 - -#define AUDIO_VOICES -#define AUDIO_PIN C6 - -#define BACKLIGHT_PIN B7 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ +#undef BACKLIGHT_LEVELS #define BACKLIGHT_LEVELS 15 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#define TAPPING_TERM 200 -#endif diff --git a/keyboards/planck/keymaps/dodger/rules.mk b/keyboards/planck/keymaps/dodger/rules.mk index 032f5af6895..1246db7432c 100644 --- a/keyboards/planck/keymaps/dodger/rules.mk +++ b/keyboards/planck/keymaps/dodger/rules.mk @@ -1,69 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = atmel-dfu - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no +CONSOLE_ENABLE = no +BACKLIGHT_ENABLE = yes TAP_DANCE_ENABLE = yes - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -LAYOUTS = ortho_4x12 planck_mit planck_grid - -DEFAULT_FOLDER = planck/rev5 diff --git a/keyboards/planck/keymaps/handwired_binaryplease/config.h b/keyboards/planck/keymaps/handwired_binaryplease/config.h index 8cd4fe40a92..abf9f5771f8 100644 --- a/keyboards/planck/keymaps/handwired_binaryplease/config.h +++ b/keyboards/planck/keymaps/handwired_binaryplease/config.h @@ -1,37 +1,11 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once -#include "../../config.h" - -/* USB Device descriptor parameter */ - - - -#undef VENDOR_ID -#undef PRODUCT_ID #undef MANUFACTURER +#define MANUFACTURER binaryplease #undef PRODUCT +#define PRODUCT Teensy_Planck + #undef MATRIX_ROW_PINS -#undef MATRIX_COL_PINS -#undef UNUSED_PINS -#undef BACKLIGHT_PIN -#undef BACKLIGHT_LEVELS - - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define MANUFACTURER binaryplease -#define PRODUCT Teensy_Planck - #define MATRIX_ROW_PINS { D3, D2, D1, D0 } +#undef MATRIX_COL_PINS #define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4 } -#define UNUSED_PINS - -#define BACKLIGHT_PIN B7 - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 0 - - -#endif diff --git a/keyboards/planck/keymaps/handwired_binaryplease/rules.mk b/keyboards/planck/keymaps/handwired_binaryplease/rules.mk index cf37fa6f3bb..459c7bce6c5 100644 --- a/keyboards/planck/keymaps/handwired_binaryplease/rules.mk +++ b/keyboards/planck/keymaps/handwired_binaryplease/rules.mk @@ -1,68 +1,4 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = yes # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - +CONSOLE_ENABLE = no +NKRO_ENABLE = no +MIDI_ENABLE = yes +AUDIO_ENABLE = no diff --git a/keyboards/planck/keymaps/kloki/config.h b/keyboards/planck/keymaps/kloki/config.h index 59bf4aa2a3e..6166fea4a77 100644 --- a/keyboards/planck/keymaps/kloki/config.h +++ b/keyboards/planck/keymaps/kloki/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once #ifdef AUDIO_ENABLE #define STARTUP_SONG SONG(PLANCK_SOUND) @@ -35,5 +32,3 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 - -#endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/kloki/rules.mk b/keyboards/planck/keymaps/kloki/rules.mk index 02926bffa6d..4f918913034 100644 --- a/keyboards/planck/keymaps/kloki/rules.mk +++ b/keyboards/planck/keymaps/kloki/rules.mk @@ -1,70 +1,2 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -LAYOUTS = ortho_4x12 planck_mit planck_grid - -DEFAULT_FOLDER = planck/rev4 +MOUSEKEY_ENABLE = yes +NKRO_ENABLE = no diff --git a/keyboards/planck/keymaps/vaire/config.h b/keyboards/planck/keymaps/vaire/config.h index b247df78599..a5e236e4a9e 100644 --- a/keyboards/planck/keymaps/vaire/config.h +++ b/keyboards/planck/keymaps/vaire/config.h @@ -1,7 +1,4 @@ -#pragma - - - +#pragma once /* * MIDI options @@ -15,7 +12,6 @@ #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 - #define MIDI_BASIC diff --git a/keyboards/planck/keymaps/vaire/rules.mk b/keyboards/planck/keymaps/vaire/rules.mk index f9dfeb72637..427c06822c5 100644 --- a/keyboards/planck/keymaps/vaire/rules.mk +++ b/keyboards/planck/keymaps/vaire/rules.mk @@ -1,81 +1,3 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -ifeq ($(strip $(KEYBOARD)), planck/rev3) - BOOTLOADER = atmel-dfu -endif -ifeq ($(strip $(KEYBOARD)), planck/rev4) - BOOTLOADER = atmel-dfu -endif -ifeq ($(strip $(KEYBOARD)), planck/rev5) - BOOTLOADER = qmk-dfu -endif -ifeq ($(strip $(KEYBOARD)), planck/light) - BOOTLOADER = qmk-dfu -endif - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in[] -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -API_SYSEX_ENABLE = no - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -LAYOUTS = ortho_4x12 planck_mit planck_grid -LAYOUTS_HAS_RGB = no - -DEFAULT_FOLDER = planck/rev5 - +MOUSEKEY_ENABLE = yes +CONSOLE_ENABLE = no +BACKLIGHT_ENABLE = yes From 76e67a97f47d40edd621fec60e59094a4e500ef0 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Mon, 22 Feb 2021 14:04:14 -0800 Subject: [PATCH 139/145] Bugfix for Jacky Studio keyboards (#11981) PR 10528 was intended to move the source for the Bear 65 and S7 Elephant to the new `jacky_studio` vendor directory. Instead of moving the source files, that PR added the source as if they were newly-supported. The result is that the Bear 65 and both revisions of the S7 Elephant have working, identical firmware in two different directories. This commit removes the source from the old directories. --- keyboards/bear_65/bear_65.c | 17 - keyboards/bear_65/bear_65.h | 46 - keyboards/bear_65/config.h | 76 - keyboards/bear_65/info.json | 15 - keyboards/bear_65/keymaps/default/keymap.c | 39 - keyboards/bear_65/keymaps/default/readme.md | 1 - keyboards/bear_65/keymaps/via/keymap.c | 47 - keyboards/bear_65/keymaps/via/readme.md | 1 - keyboards/bear_65/keymaps/via/rules.mk | 1 - keyboards/bear_65/readme.md | 19 - keyboards/bear_65/rules.mk | 24 - keyboards/s7_elephant/.noci | 0 keyboards/s7_elephant/readme.md | 20 - keyboards/s7_elephant/rev1/.noci | 0 keyboards/s7_elephant/rev1/config.h | 47 - keyboards/s7_elephant/rev1/info.json | 2348 ----------------- .../s7_elephant/rev1/keymaps/default/config.h | 1 - .../s7_elephant/rev1/keymaps/default/keymap.c | 64 - .../rev1/keymaps/default/readme.md | 35 - keyboards/s7_elephant/rev1/readme.md | 17 - keyboards/s7_elephant/rev1/rev1.c | 1 - keyboards/s7_elephant/rev1/rev1.h | 853 ------ keyboards/s7_elephant/rev1/rules.mk | 25 - keyboards/s7_elephant/rev2/config.h | 82 - keyboards/s7_elephant/rev2/info.json | 167 -- .../s7_elephant/rev2/keymaps/default/keymap.c | 65 - .../rev2/keymaps/default/readme.md | 35 - .../s7_elephant/rev2/keymaps/via/keymap.c | 92 - .../s7_elephant/rev2/keymaps/via/readme.md | 35 - .../s7_elephant/rev2/keymaps/via/rules.mk | 1 - keyboards/s7_elephant/rev2/readme.md | 17 - keyboards/s7_elephant/rev2/rev2.c | 19 - keyboards/s7_elephant/rev2/rev2.h | 61 - keyboards/s7_elephant/rev2/rules.mk | 32 - keyboards/s7_elephant/rules.mk | 1 - 35 files changed, 4304 deletions(-) delete mode 100644 keyboards/bear_65/bear_65.c delete mode 100644 keyboards/bear_65/bear_65.h delete mode 100644 keyboards/bear_65/config.h delete mode 100644 keyboards/bear_65/info.json delete mode 100644 keyboards/bear_65/keymaps/default/keymap.c delete mode 100644 keyboards/bear_65/keymaps/default/readme.md delete mode 100644 keyboards/bear_65/keymaps/via/keymap.c delete mode 100644 keyboards/bear_65/keymaps/via/readme.md delete mode 100644 keyboards/bear_65/keymaps/via/rules.mk delete mode 100644 keyboards/bear_65/readme.md delete mode 100644 keyboards/bear_65/rules.mk delete mode 100644 keyboards/s7_elephant/.noci delete mode 100644 keyboards/s7_elephant/readme.md delete mode 100644 keyboards/s7_elephant/rev1/.noci delete mode 100644 keyboards/s7_elephant/rev1/config.h delete mode 100644 keyboards/s7_elephant/rev1/info.json delete mode 100644 keyboards/s7_elephant/rev1/keymaps/default/config.h delete mode 100644 keyboards/s7_elephant/rev1/keymaps/default/keymap.c delete mode 100644 keyboards/s7_elephant/rev1/keymaps/default/readme.md delete mode 100644 keyboards/s7_elephant/rev1/readme.md delete mode 100644 keyboards/s7_elephant/rev1/rev1.c delete mode 100644 keyboards/s7_elephant/rev1/rev1.h delete mode 100644 keyboards/s7_elephant/rev1/rules.mk delete mode 100644 keyboards/s7_elephant/rev2/config.h delete mode 100644 keyboards/s7_elephant/rev2/info.json delete mode 100644 keyboards/s7_elephant/rev2/keymaps/default/keymap.c delete mode 100644 keyboards/s7_elephant/rev2/keymaps/default/readme.md delete mode 100644 keyboards/s7_elephant/rev2/keymaps/via/keymap.c delete mode 100644 keyboards/s7_elephant/rev2/keymaps/via/readme.md delete mode 100644 keyboards/s7_elephant/rev2/keymaps/via/rules.mk delete mode 100644 keyboards/s7_elephant/rev2/readme.md delete mode 100644 keyboards/s7_elephant/rev2/rev2.c delete mode 100644 keyboards/s7_elephant/rev2/rev2.h delete mode 100644 keyboards/s7_elephant/rev2/rules.mk delete mode 100644 keyboards/s7_elephant/rules.mk diff --git a/keyboards/bear_65/bear_65.c b/keyboards/bear_65/bear_65.c deleted file mode 100644 index a2ae572b82d..00000000000 --- a/keyboards/bear_65/bear_65.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright 2020 MudkipMao - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "bear_65.h" diff --git a/keyboards/bear_65/bear_65.h b/keyboards/bear_65/bear_65.h deleted file mode 100644 index 94ec89c889d..00000000000 --- a/keyboards/bear_65/bear_65.h +++ /dev/null @@ -1,46 +0,0 @@ -/* Copyright 2020 MudkipMao - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "quantum.h" - -#define LAYOUT_all( \ - K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ - K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ -} - -#define LAYOUT_full_bs( \ - K31, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K4E, \ - K1E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K2E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K43, K45, K46, K48, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, KC_NO, K43, KC_NO, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ -} diff --git a/keyboards/bear_65/config.h b/keyboards/bear_65/config.h deleted file mode 100644 index 1b7524f074b..00000000000 --- a/keyboards/bear_65/config.h +++ /dev/null @@ -1,76 +0,0 @@ -/* -Copyright 2020 MudkipMao - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA13B // Jacky's vendor ID, arbitrarily selected by MudkipMao -#define PRODUCT_ID 0x000A -#define DEVICE_VER 0x0001 -#define MANUFACTURER Jacky -#define PRODUCT Jacky Bear 65 Ergo - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 } - -/* Setting the matrix value of top left key for bootmagic lite */ -#define BOOTMAGIC_LITE_ROW 3 -#define BOOTMAGIC_LITE_COLUMN 1 - -#define DIODE_DIRECTION ROW2COL - -#define BACKLIGHT_PIN B6 -#define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 4 - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 15 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - #define RGBLIGHT_LIMIT_VAL 139 /* The maximum brightness level */ - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING -#endif diff --git a/keyboards/bear_65/info.json b/keyboards/bear_65/info.json deleted file mode 100644 index 67fc090af83..00000000000 --- a/keyboards/bear_65/info.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "keyboard_name": "Bear 65", - "url": "https://qmk.fm/keyboards", - "maintainer": "qmk", - "width": 20.75, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"|", "x":17.25, "y":0}, {"label":"~", "x":18.25, "y":0}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"Backspace", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] - }, - "LAYOUT_full_bs": { - "layout": [{"label":"Esc", "x":0.5, "y":0}, {"label":"~", "x":1.75, "y":0}, {"label":"!", "x":2.75, "y":0}, {"label":"@", "x":3.75, "y":0}, {"label":"#", "x":4.75, "y":0}, {"label":"$", "x":5.75, "y":0}, {"label":"%", "x":6.75, "y":0}, {"label":"^", "x":7.75, "y":0}, {"label":"&", "x":11.25, "y":0}, {"label":"*", "x":12.25, "y":0}, {"label":"(", "x":13.25, "y":0}, {"label":")", "x":14.25, "y":0}, {"label":"_", "x":15.25, "y":0}, {"label":"+", "x":16.25, "y":0}, {"label":"Backspace", "x":17.25, "y":0, "w":2}, {"label":"Del", "x":19.75, "y":0}, {"label":"PgUp", "x":0.25, "y":1}, {"label":"Tab", "x":1.75, "y":1, "w":1.5}, {"label":"Q", "x":3.25, "y":1}, {"label":"W", "x":4.25, "y":1}, {"label":"E", "x":5.25, "y":1}, {"label":"R", "x":6.25, "y":1}, {"label":"T", "x":7.25, "y":1}, {"label":"Y", "x":10.75, "y":1}, {"label":"U", "x":11.75, "y":1}, {"label":"I", "x":12.75, "y":1}, {"label":"O", "x":13.75, "y":1}, {"label":"P", "x":14.75, "y":1}, {"label":"{", "x":15.75, "y":1}, {"label":"}", "x":16.75, "y":1}, {"label":"|", "x":17.75, "y":1, "w":1.5}, {"label":"PgDn", "x":0, "y":2}, {"label":"Caps Lock", "x":1.75, "y":2, "w":1.75}, {"label":"A", "x":3.5, "y":2}, {"label":"S", "x":4.5, "y":2}, {"label":"D", "x":5.5, "y":2}, {"label":"F", "x":6.5, "y":2}, {"label":"G", "x":7.5, "y":2}, {"label":"H", "x":11, "y":2}, {"label":"J", "x":12, "y":2}, {"label":"K", "x":13, "y":2}, {"label":"L", "x":14, "y":2}, {"label":":", "x":15, "y":2}, {"label":"\"", "x":16, "y":2}, {"label":"Enter", "x":17, "y":2, "w":2.25}, {"label":"Shift", "x":1.75, "y":3, "w":2.25}, {"label":"Z", "x":4, "y":3}, {"label":"X", "x":5, "y":3}, {"label":"C", "x":6, "y":3}, {"label":"V", "x":7, "y":3}, {"label":"B", "x":8, "y":3}, {"label":"B", "x":10.5, "y":3}, {"label":"N", "x":11.5, "y":3}, {"label":"M", "x":12.5, "y":3}, {"label":"<", "x":13.5, "y":3}, {"label":">", "x":14.5, "y":3}, {"label":"?", "x":15.5, "y":3}, {"label":"Shift", "x":16.5, "y":3, "w":1.75}, {"label":"Up", "x":18.25, "y":3}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.25}, {"x":6, "y":4, "w":2.25}, {"label":"Win", "x":8.25, "y":4}, {"x":10.5, "y":4, "w":2.75}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Left", "x":17.25, "y":4}, {"label":"Down", "x":18.25, "y":4}, {"label":"Right", "x":19.25, "y":4}] - } - } -} diff --git a/keyboards/bear_65/keymaps/default/keymap.c b/keyboards/bear_65/keymaps/default/keymap.c deleted file mode 100644 index b7d5cdf61cc..00000000000 --- a/keyboards/bear_65/keymaps/default/keymap.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2020 MudkipMao - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines names for use in layer keycodes and the keymap -enum layer_names { - _BASE, - _FN, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( - KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_DEL, - KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT - ), - [_FN] = LAYOUT_all( - RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, - RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, - RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______ - ) -}; diff --git a/keyboards/bear_65/keymaps/default/readme.md b/keyboards/bear_65/keymaps/default/readme.md deleted file mode 100644 index d5173485577..00000000000 --- a/keyboards/bear_65/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for bear_65 diff --git a/keyboards/bear_65/keymaps/via/keymap.c b/keyboards/bear_65/keymaps/via/keymap.c deleted file mode 100644 index 2ddc5b43d8b..00000000000 --- a/keyboards/bear_65/keymaps/via/keymap.c +++ /dev/null @@ -1,47 +0,0 @@ -/* Copyright 2020 MudkipMao - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_full_bs( - KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT - ), - [1] = LAYOUT_full_bs( - RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - RGB_MOD, _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_VAI, _______, - RGB_TOG, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______ - ), - [2] = LAYOUT_full_bs( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______ - ), - [3] = LAYOUT_full_bs( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______,_______ - ) -}; diff --git a/keyboards/bear_65/keymaps/via/readme.md b/keyboards/bear_65/keymaps/via/readme.md deleted file mode 100644 index 5cb67ab25f3..00000000000 --- a/keyboards/bear_65/keymaps/via/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The via keymap for bear_65 diff --git a/keyboards/bear_65/keymaps/via/rules.mk b/keyboards/bear_65/keymaps/via/rules.mk deleted file mode 100644 index 1e5b99807cb..00000000000 --- a/keyboards/bear_65/keymaps/via/rules.mk +++ /dev/null @@ -1 +0,0 @@ -VIA_ENABLE = yes diff --git a/keyboards/bear_65/readme.md b/keyboards/bear_65/readme.md deleted file mode 100644 index 44a5e95537e..00000000000 --- a/keyboards/bear_65/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Bear 65 - -![Bear 65](https://i.imgur.com/W1sVP1Tl.jpg) - -A gasket-mounted 65% keyboard inspired by the [TGR Alice](https://github.com/qmk/qmk_firmware/tree/master/keyboards/tgr/alice). Designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. - -* Keyboard Maintainer: QMK Community -* Hardware Supported: Bear 65 -* Hardware Availability: The GB happened July 15th 2020, units are still in production - -Make example for this keyboard (after setting up your build environment): - - make bear_65:default - -Flashing example for this keyboard: - - make bear_65:default:flash - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bear_65/rules.mk b/keyboards/bear_65/rules.mk deleted file mode 100644 index 339c37c7ee0..00000000000 --- a/keyboards/bear_65/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth -AUDIO_ENABLE = no # Audio output - -LTO_ENABLE = yes # Use LTO flags to reduce firmware size diff --git a/keyboards/s7_elephant/.noci b/keyboards/s7_elephant/.noci deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/s7_elephant/readme.md b/keyboards/s7_elephant/readme.md deleted file mode 100644 index 76838be218a..00000000000 --- a/keyboards/s7_elephant/readme.md +++ /dev/null @@ -1,20 +0,0 @@ -# S7 Elephant - -![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) - -A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. - -**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board. - -* Keyboard Maintainer: QMK Community -* Hardware Supported: S7 Elephant rev1, rev2 -* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) - -Make example for this keyboard (after setting up your build environment): - - make s7_elephant/rev1:default # 2018 run - make s7_elephant/rev2:default # 2019 run - -To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s7_elephant/rev1/.noci b/keyboards/s7_elephant/rev1/.noci deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/keyboards/s7_elephant/rev1/config.h b/keyboards/s7_elephant/rev1/config.h deleted file mode 100644 index 700b0326c2e..00000000000 --- a/keyboards/s7_elephant/rev1/config.h +++ /dev/null @@ -1,47 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID -#define PRODUCT_ID 0x0007 -#define DEVICE_VER 0x0001 -#define MANUFACTURER jacky -#define PRODUCT S7 Elephant - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } -#define MATRIX_COL_PINS { B6, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7, F1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_SLEEP -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/s7_elephant/rev1/info.json b/keyboards/s7_elephant/rev1/info.json deleted file mode 100644 index 3d45f0b094c..00000000000 --- a/keyboards/s7_elephant/rev1/info.json +++ /dev/null @@ -1,2348 +0,0 @@ -{ - "keyboard_name": "S7 Elephant", - "url": "https://geekhack.org/index.php?topic=96434.0", - "maintainer": "qmk", - "width": 18, - "height": 5, - "layouts": { - "LAYOUT_ansi": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_small_lshift": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_small_lshift_small_bspc": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_1u": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_1u_small_lshift": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_1u_small_bspc": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_1u_small_lshift_small_bspc": { - "key_count": 75, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_7u": { - "key_count": 71, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_7u_small_lshift": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_7u_small_bspc": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_7u_small_lshift_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_small_lshift": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_small_lshift_small_bspc": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_7u": { - "key_count": 71, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":7}, - {"label":"Fn", "x":13, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_7u_small_lshift": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":7}, - {"label":"Fn", "x":13, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_7u_small_bspc": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":2.25}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":7}, - {"label":"Fn", "x":13, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_ansi_blocker_7u_small_lshift_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"|", "x":15.5, "y":1, "w":1.5}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"Enter", "x":14.75, "y":2, "w":2.25}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":7}, - {"label":"Fn", "x":13, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_small_bspc": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_1u": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_1u_small_bspc": { - "key_count": 75, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4}, - {"label":"Alt", "x":13, "y":4}, - {"label":"Ctrl", "x":14, "y":4}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_7u": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_7u_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4, "w":1.5}, - {"x":5, "y":4, "w":7}, - {"label":"Fn", "x":12, "y":4, "w":1.5}, - {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_blocker": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_blocker_small_bspc": { - "key_count": 74, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.25}, - {"label":"Win", "x":3.25, "y":4, "w":1.25}, - {"label":"Alt", "x":4.5, "y":4, "w":1.25}, - {"x":5.75, "y":4, "w":6.25}, - {"label":"Fn", "x":12, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.25, "y":4, "w":1.25}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_blocker_7u": { - "key_count": 72, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0, "w":2}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"x":6, "y":4, "w":6.75}, - {"label":"Fn", "x":12.75, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - }, - "LAYOUT_iso_blocker_7u_small_bspc": { - "key_count": 73, - "layout": [ - {"label":"F1", "x":0, "y":0}, - {"label":"Esc", "x":2, "y":0}, - {"label":"!", "x":3, "y":0}, - {"label":"@", "x":4, "y":0}, - {"label":"#", "x":5, "y":0}, - {"label":"$", "x":6, "y":0}, - {"label":"%", "x":7, "y":0}, - {"label":"^", "x":8, "y":0}, - {"label":"&", "x":9, "y":0}, - {"label":"*", "x":10, "y":0}, - {"label":"(", "x":11, "y":0}, - {"label":")", "x":12, "y":0}, - {"label":"_", "x":13, "y":0}, - {"label":"+", "x":14, "y":0}, - {"label":"Backspace", "x":15, "y":0}, - {"x":16, "y":0}, - {"label":"Home", "x":17, "y":0}, - {"label":"F2", "x":0, "y":1}, - {"label":"Tab", "x":2, "y":1, "w":1.5}, - {"label":"Q", "x":3.5, "y":1}, - {"label":"W", "x":4.5, "y":1}, - {"label":"E", "x":5.5, "y":1}, - {"label":"R", "x":6.5, "y":1}, - {"label":"T", "x":7.5, "y":1}, - {"label":"Y", "x":8.5, "y":1}, - {"label":"U", "x":9.5, "y":1}, - {"label":"I", "x":10.5, "y":1}, - {"label":"O", "x":11.5, "y":1}, - {"label":"P", "x":12.5, "y":1}, - {"label":"{", "x":13.5, "y":1}, - {"label":"}", "x":14.5, "y":1}, - {"label":"End", "x":17, "y":1}, - {"label":"F3", "x":0, "y":2}, - {"label":"Caps Lock", "x":2, "y":2, "w":1.75}, - {"label":"A", "x":3.75, "y":2}, - {"label":"S", "x":4.75, "y":2}, - {"label":"D", "x":5.75, "y":2}, - {"label":"F", "x":6.75, "y":2}, - {"label":"G", "x":7.75, "y":2}, - {"label":"H", "x":8.75, "y":2}, - {"label":"J", "x":9.75, "y":2}, - {"label":"K", "x":10.75, "y":2}, - {"label":"L", "x":11.75, "y":2}, - {"label":":", "x":12.75, "y":2}, - {"label":"\"", "x":13.75, "y":2}, - {"label":"|", "x":14.75, "y":2}, - {"label":"Enter", "x":15.75, "y":1, "w":1.25, "h":2}, - {"label":"Ins", "x":17, "y":2}, - {"label":"F4", "x":0, "y":3}, - {"label":"Shift", "x":2, "y":3, "w":1.25}, - {"x":3.25, "y":3}, - {"label":"Z", "x":4.25, "y":3}, - {"label":"X", "x":5.25, "y":3}, - {"label":"C", "x":6.25, "y":3}, - {"label":"V", "x":7.25, "y":3}, - {"label":"B", "x":8.25, "y":3}, - {"label":"N", "x":9.25, "y":3}, - {"label":"M", "x":10.25, "y":3}, - {"label":"<", "x":11.25, "y":3}, - {"label":">", "x":12.25, "y":3}, - {"label":"?", "x":13.25, "y":3}, - {"label":"Shift", "x":14.25, "y":3, "w":1.75}, - {"label":"Up", "x":16, "y":3}, - {"label":"Del", "x":17, "y":3}, - {"label":"F5", "x":0, "y":4}, - {"label":"Ctrl", "x":2, "y":4, "w":1.5}, - {"label":"Win", "x":3.5, "y":4}, - {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":7}, - {"label":"Fn", "x":13, "y":4, "w":1.5}, - {"label":"Left", "x":15, "y":4}, - {"label":"Down", "x":16, "y":4}, - {"label":"Right", "x":17, "y":4} - ] - } - } -} diff --git a/keyboards/s7_elephant/rev1/keymaps/default/config.h b/keyboards/s7_elephant/rev1/keymaps/default/config.h deleted file mode 100644 index 85f62371e9f..00000000000 --- a/keyboards/s7_elephant/rev1/keymaps/default/config.h +++ /dev/null @@ -1 +0,0 @@ -#define RGBLIGHT_LIMIT_VAL 80 diff --git a/keyboards/s7_elephant/rev1/keymaps/default/keymap.c b/keyboards/s7_elephant/rev1/keymaps/default/keymap.c deleted file mode 100644 index 339f2d379c6..00000000000 --- a/keyboards/s7_elephant/rev1/keymaps/default/keymap.c +++ /dev/null @@ -1,64 +0,0 @@ -#include QMK_KEYBOARD_H - -enum custom_layers { - _QWERTY, - _FN -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,------. ,-------------------------------------------------------------------------------------------------. - * | F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | - * |------| |-------------------------------------------------------------------------------------------------| - * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | - * |------| |-------------------------------------------------------------------------------------------------| - * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | - * |------| |-------------------------------------------------------------------------------------------------| - * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | - * |------| |-------------------------------------------------------------------------------------------------| - * | F5 | | Ctrl | Gui | Alt | Space | FN | RCtrl | L | D | R | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -[_QWERTY] = LAYOUT_ansi( -KC_F1, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, -KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, -KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, -KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, -KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT -), - -/* FN - * ,------. ,-------------------------------------------------------------------------------------------------. - * |Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | |PgDn | - * |------| |-------------------------------------------------------------------------------------------------| - * |EEPRST| | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -[_FN] = LAYOUT_ansi( -RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, -_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, -_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_PGUP, -_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, -EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______ -), -}; - -void led_set_user(uint8_t usb_led) { - // Turn LEDs On/Off for Caps Lock - if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) { - rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom(0, 0, 80); - } else { - rgblight_sethsv_noeeprom(0, 0, 80); - rgblight_disable_noeeprom(); - } -} diff --git a/keyboards/s7_elephant/rev1/keymaps/default/readme.md b/keyboards/s7_elephant/rev1/keymaps/default/readme.md deleted file mode 100644 index c4fe30acdd5..00000000000 --- a/keyboards/s7_elephant/rev1/keymaps/default/readme.md +++ /dev/null @@ -1,35 +0,0 @@ -# Default keymap for S7 Elephant - -**Features** - -* LEDs are functioning as Caps-Lock indicators - -## QWERTY (Normal) Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | -|------| |-------------------------------------------------------------------------------------------------| -| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | -|------| |-------------------------------------------------------------------------------------------------| -| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | -|------| |-------------------------------------------------------------------------------------------------| -| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | -|------| |-------------------------------------------------------------------------------------------------| -| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | -`------' `-------------------------------------------------------------------------------------------------' -``` - -## FN Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | | | | -|------| |-------------------------------------------------------------------------------------------------| -| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | |PgDn | -|------| |-------------------------------------------------------------------------------------------------| -|EPRM | | | | | | | | | | | | -`------' `-------------------------------------------------------------------------------------------------' -``` diff --git a/keyboards/s7_elephant/rev1/readme.md b/keyboards/s7_elephant/rev1/readme.md deleted file mode 100644 index 702be4c3a78..00000000000 --- a/keyboards/s7_elephant/rev1/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# S7 Elephant - -![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) - -A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. - -* Keyboard Maintainer: QMK Community -* Hardware Supported: S7 Elephant -* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) - -Make example for this keyboard (after setting up your build environment): - - make s7_elephant/rev1:default - -To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s7_elephant/rev1/rev1.c b/keyboards/s7_elephant/rev1/rev1.c deleted file mode 100644 index 520a869e57b..00000000000 --- a/keyboards/s7_elephant/rev1/rev1.c +++ /dev/null @@ -1 +0,0 @@ -#include "rev1.h" diff --git a/keyboards/s7_elephant/rev1/rev1.h b/keyboards/s7_elephant/rev1/rev1.h deleted file mode 100644 index 958ba0fae0a..00000000000 --- a/keyboards/s7_elephant/rev1/rev1.h +++ /dev/null @@ -1,853 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define ____ KC_NO - -/* ANSI - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small shift - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_small_lshift( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small shift and small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_small_lshift_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ANSI with 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_1u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* ANSI with small shift and 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_1u_small_lshift( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* ANSI with small backspace and 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_1u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* ANSI with small shift and small backspace and 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_1u_small_lshift_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ANSI with 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_7u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small shift and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_7u_small_lshift( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_7u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with small shift and small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_ansi_7u_small_lshift_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ANSI with blocker - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_ansi_blocker( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small shift - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_ansi_blocker_small_lshift( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_ansi_blocker_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small shift and small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_ansi_blocker_small_lshift_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ANSI with blocker and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_ansi_blocker_7u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small shift and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_ansi_blocker_7u_small_lshift( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_ansi_blocker_7u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, ____, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} - -/* ANSI with blocker and small shift and small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_ansi_blocker_7u_small_lshift_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ISO - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ISO with small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ISO with 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso_1u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* ISO with small backspace and 1u keys in the bottom row - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso_1u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K412, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, K412, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ISO with 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso_7u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ISO with small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_iso_7u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} -/* **************************************************************************************************************************************** */ -/* ISO with blocker - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_iso_blocker( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* ISO with blocker and small backspace - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------- -------------------' - */ - -#define LAYOUT_iso_blocker_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K411, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, K411, ____, K413, K414, K415 } \ -} - -/* **************************************************************************************************************************************** */ -/* ISO with blocker and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_iso_blocker_7u( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} - -/* ISO with blocker and small backspace and 7u spacebar - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |------------------------------------------------------------------------------------ |-----| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | - * `------' `--------------------------------------------------------------------------- ------------------' - */ - -#define LAYOUT_iso_blocker_7u_small_bspc( \ -K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K013, K214, K015, \ -K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ -K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K114, K213, K215, \ -K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \ -K400, K401, K402, K403, K407, K410, K413, K414, K415 \ -) { \ -{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ -{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ -{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ -{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ -{ K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ -} diff --git a/keyboards/s7_elephant/rev1/rules.mk b/keyboards/s7_elephant/rev1/rules.mk deleted file mode 100644 index 91fe85c3dfb..00000000000 --- a/keyboards/s7_elephant/rev1/rules.mk +++ /dev/null @@ -1,25 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality diff --git a/keyboards/s7_elephant/rev2/config.h b/keyboards/s7_elephant/rev2/config.h deleted file mode 100644 index e9d9cf9fad3..00000000000 --- a/keyboards/s7_elephant/rev2/config.h +++ /dev/null @@ -1,82 +0,0 @@ -/* -Copyright 2020 MudkipMao - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID -#define PRODUCT_ID 0x0008 // 8 for S7++ -#define DEVICE_VER 0x0002 -#define MANUFACTURER Jacky -#define PRODUCT Jacky S7 Elephant Rev 2 - -/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */ -#define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 16 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * - * - * 0 1 2 3 4 5 6 7 8 9 A B C D E F */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } -#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 } - -/* Setting the matrix value of top left key for bootmagic lite */ -#define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 15 - -#define DIODE_DIRECTION ROW2COL - -#define BACKLIGHT_PIN B6 -// #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 15 - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 2 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -#endif // RGB_DI_PIN - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/s7_elephant/rev2/info.json b/keyboards/s7_elephant/rev2/info.json deleted file mode 100644 index 5c811cd47df..00000000000 --- a/keyboards/s7_elephant/rev2/info.json +++ /dev/null @@ -1,167 +0,0 @@ -{ - "keyboard_name": "S7 Elephant Rev2", - "url": "https://geekhack.org/index.php?topic=103148.0", - "maintainer": "qmk", - "width": 17.25, - "height": 5, - "layouts": { - "LAYOUT_all": { - "key_count": 75, - "layout": [ - {"label":"K0F (B0,E6)", "x":0, "y":0}, - {"label":"K00 (B0,D0)", "x":1.25, "y":0}, - {"label":"K01 (B0,D1)", "x":2.25, "y":0}, - {"label":"K02 (B0,D2)", "x":3.25, "y":0}, - {"label":"K03 (B0,D3)", "x":4.25, "y":0}, - {"label":"K04 (B0,D5)", "x":5.25, "y":0}, - {"label":"K05 (B0,D4)", "x":6.25, "y":0}, - {"label":"K06 (B0,D6)", "x":7.25, "y":0}, - {"label":"K07 (B0,D7)", "x":8.25, "y":0}, - {"label":"K08 (B0,B4)", "x":9.25, "y":0}, - {"label":"K09 (B0,F7)", "x":10.25, "y":0}, - {"label":"K0A (B0,F6)", "x":11.25, "y":0}, - {"label":"K0B (B0,F5)", "x":12.25, "y":0}, - {"label":"K0C (B0,F4)", "x":13.25, "y":0}, - {"label":"K0D (B0,F1)", "x":14.25, "y":0}, - {"label":"K0E (B0,F0)", "x":15.25, "y":0}, - {"label":"K4E (B7,F0)", "x":16.25, "y":0}, - {"label":"K1F (B1,E6)", "x":0, "y":1}, - {"label":"K10 (B1,D0)", "x":1.25, "y":1, "w":1.5}, - {"label":"K11 (B1,D1)", "x":2.75, "y":1}, - {"label":"K12 (B1,D2)", "x":3.75, "y":1}, - {"label":"K13 (B1,D3)", "x":4.75, "y":1}, - {"label":"K14 (B1,D5)", "x":5.75, "y":1}, - {"label":"K15 (B1,D4)", "x":6.75, "y":1}, - {"label":"K16 (B1,D6)", "x":7.75, "y":1}, - {"label":"K17 (B1,D7)", "x":8.75, "y":1}, - {"label":"K18 (B1,B4)", "x":9.75, "y":1}, - {"label":"K19 (B1,F7)", "x":10.75, "y":1}, - {"label":"K1A (B1,F6)", "x":11.75, "y":1}, - {"label":"K1B (B1,F5)", "x":12.75, "y":1}, - {"label":"K1C (B1,F4)", "x":13.75, "y":1}, - {"label":"K2C (B2,F4)", "x":14.75, "y":1, "w":1.5}, - {"label":"K1E (B1,F0)", "x":16.25, "y":1}, - {"label":"K2F (B2,E6)", "x":0, "y":2}, - {"label":"K20 (B2,D0)", "x":1.25, "y":2, "w":1.75}, - {"label":"K21 (B2,D1)", "x":3, "y":2}, - {"label":"K22 (B2,D2)", "x":4, "y":2}, - {"label":"K23 (B2,D3)", "x":5, "y":2}, - {"label":"K24 (B2,D5)", "x":6, "y":2}, - {"label":"K25 (B2,D4)", "x":7, "y":2}, - {"label":"K26 (B2,D6)", "x":8, "y":2}, - {"label":"K27 (B2,D7)", "x":9, "y":2}, - {"label":"K28 (B2,B4)", "x":10, "y":2}, - {"label":"K29 (B2,F7)", "x":11, "y":2}, - {"label":"K2A (B2,F6)", "x":12, "y":2}, - {"label":"K2B (B2,F5)", "x":13, "y":2}, - {"label":"K1D (B1,F1)", "x":14, "y":2, "w":2.25}, - {"label":"K2E (B2,F0)", "x":16.25, "y":2}, - {"label":"K3F (B3,E6)", "x":0, "y":3}, - {"label":"K30 (B3,D0)", "x":1.25, "y":3, "w":1.25}, - {"label":"K31 (B3,D1)", "x":2.5, "y":3}, - {"label":"K32 (B3,D2)", "x":3.5, "y":3}, - {"label":"K33 (B3,D3)", "x":4.5, "y":3}, - {"label":"K34 (B3,D5)", "x":5.5, "y":3}, - {"label":"K35 (B3,D4)", "x":6.5, "y":3}, - {"label":"K36 (B3,D6)", "x":7.5, "y":3}, - {"label":"K37 (B3,D7)", "x":8.5, "y":3}, - {"label":"K38 (B3,B4)", "x":9.5, "y":3}, - {"label":"K39 (B3,F7)", "x":10.5, "y":3}, - {"label":"K3A (B3,F6)", "x":11.5, "y":3}, - {"label":"K3B (B3,F5)", "x":12.5, "y":3}, - {"label":"K3C (B3,F4)", "x":13.5, "y":3, "w":1.75}, - {"label":"K3D (B3,F1)", "x":15.25, "y":3}, - {"label":"K3E (B3,F0)", "x":16.25, "y":3}, - {"label":"K4F (B7,E6)", "x":0, "y":4}, - {"label":"K40 (B7,D0)", "x":1.25, "y":4, "w":1.25}, - {"label":"K41 (B7,D1)", "x":2.5, "y":4, "w":1.25}, - {"label":"K42 (B7,D2)", "x":3.75, "y":4, "w":1.25}, - {"label":"K46 (B7,D6)", "x":5, "y":4, "w":6.25}, - {"label":"K48 (B7,B4)", "x":11.25, "y":4}, - {"label":"K49 (B7,F7)", "x":12.25, "y":4}, - {"label":"K4A (B7,F6)", "x":13.25, "y":4}, - {"label":"K4B (B7,F5)", "x":14.25, "y":4}, - {"label":"K4C (B7,F4)", "x":15.25, "y":4}, - {"label":"K4D (B7,F1)", "x":16.25, "y":4} - ] - }, - "LAYOUT_ansi_1u": { - "key_count": 73, - "layout": [ - {"label":"K0F", "x":0, "y":0}, - {"label":"K00", "x":1.25, "y":0}, - {"label":"K01", "x":2.25, "y":0}, - {"label":"K02", "x":3.25, "y":0}, - {"label":"K03", "x":4.25, "y":0}, - {"label":"K04", "x":5.25, "y":0}, - {"label":"K05", "x":6.25, "y":0}, - {"label":"K06", "x":7.25, "y":0}, - {"label":"K07", "x":8.25, "y":0}, - {"label":"K08", "x":9.25, "y":0}, - {"label":"K09", "x":10.25, "y":0}, - {"label":"K0A", "x":11.25, "y":0}, - {"label":"K0B", "x":12.25, "y":0}, - {"label":"K0C", "x":13.25, "y":0}, - {"label":"K0E", "x":14.25, "y":0, "w":2}, - {"label":"K4E", "x":16.25, "y":0}, - {"label":"K1F", "x":0, "y":1}, - {"label":"K10", "x":1.25, "y":1, "w":1.5}, - {"label":"K11", "x":2.75, "y":1}, - {"label":"K12", "x":3.75, "y":1}, - {"label":"K13", "x":4.75, "y":1}, - {"label":"K14", "x":5.75, "y":1}, - {"label":"K15", "x":6.75, "y":1}, - {"label":"K16", "x":7.75, "y":1}, - {"label":"K17", "x":8.75, "y":1}, - {"label":"K18", "x":9.75, "y":1}, - {"label":"K19", "x":10.75, "y":1}, - {"label":"K1A", "x":11.75, "y":1}, - {"label":"K1B", "x":12.75, "y":1}, - {"label":"K1C", "x":13.75, "y":1}, - {"label":"K2C", "x":14.75, "y":1, "w":1.5}, - {"label":"K1E", "x":16.25, "y":1}, - {"label":"K2F", "x":0, "y":2}, - {"label":"K20", "x":1.25, "y":2, "w":1.75}, - {"label":"K21", "x":3, "y":2}, - {"label":"K22", "x":4, "y":2}, - {"label":"K23", "x":5, "y":2}, - {"label":"K24", "x":6, "y":2}, - {"label":"K25", "x":7, "y":2}, - {"label":"K26", "x":8, "y":2}, - {"label":"K27", "x":9, "y":2}, - {"label":"K28", "x":10, "y":2}, - {"label":"K29", "x":11, "y":2}, - {"label":"K2A", "x":12, "y":2}, - {"label":"K2B", "x":13, "y":2}, - {"label":"K1D", "x":14, "y":2, "w":2.25}, - {"label":"K2E", "x":16.25, "y":2}, - {"label":"K3F", "x":0, "y":3}, - {"label":"K30", "x":1.25, "y":3, "w":2.25}, - {"label":"K32", "x":3.5, "y":3}, - {"label":"K33", "x":4.5, "y":3}, - {"label":"K34", "x":5.5, "y":3}, - {"label":"K35", "x":6.5, "y":3}, - {"label":"K36", "x":7.5, "y":3}, - {"label":"K37", "x":8.5, "y":3}, - {"label":"K38", "x":9.5, "y":3}, - {"label":"K39", "x":10.5, "y":3}, - {"label":"K3A", "x":11.5, "y":3}, - {"label":"K3B", "x":12.5, "y":3}, - {"label":"K3C", "x":13.5, "y":3, "w":1.75}, - {"label":"K3D", "x":15.25, "y":3}, - {"label":"K3E", "x":16.25, "y":3}, - {"label":"K4F", "x":0, "y":4}, - {"label":"K40", "x":1.25, "y":4, "w":1.25}, - {"label":"K41", "x":2.5, "y":4, "w":1.25}, - {"label":"K42", "x":3.75, "y":4, "w":1.25}, - {"label":"K46", "x":5, "y":4, "w":6.25}, - {"label":"K48", "x":11.25, "y":4}, - {"label":"K49", "x":12.25, "y":4}, - {"label":"K4A", "x":13.25, "y":4}, - {"label":"K4B", "x":14.25, "y":4}, - {"label":"K4C", "x":15.25, "y":4}, - {"label":"K4D", "x":16.25, "y":4} - ] - } - } -} diff --git a/keyboards/s7_elephant/rev2/keymaps/default/keymap.c b/keyboards/s7_elephant/rev2/keymaps/default/keymap.c deleted file mode 100644 index b1fbd3830d6..00000000000 --- a/keyboards/s7_elephant/rev2/keymaps/default/keymap.c +++ /dev/null @@ -1,65 +0,0 @@ -#include QMK_KEYBOARD_H - -enum custom_layers { - _QWERTY, - _FN -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,------. ,-------------------------------------------------------------------------------------------------. - * | F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | - * |------| |-------------------------------------------------------------------------------------------------| - * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | - * |------| |-------------------------------------------------------------------------------------------------| - * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Home| - * |------| |-------------------------------------------------------------------------------------------------| - * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | - * |------| |-------------------------------------------------------------------------------------------------| - * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | - * `------' `-------------------------------------------------------------------------------------------------' - */ - - [_QWERTY] = LAYOUT_ansi_1u( - KC_F1, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, - KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), - -/* FN - * ,------. ,-------------------------------------------------------------------------------------------------. - * |Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | |PgDn | - * |------| |-------------------------------------------------------------------------------------------------| - * |EEPRST| | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - - [_FN] = LAYOUT_ansi_1u( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_PGUP, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, - EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), -}; - -bool led_update_user(led_t led_state) { - // Turn LEDs On/Off for Caps Lock - if (led_state.caps_lock) { - rgblight_enable_noeeprom(); - rgblight_sethsv_noeeprom(0, 0, 80); - } else { - rgblight_sethsv_noeeprom(0, 0, 80); - rgblight_disable_noeeprom(); - } - return false; -} diff --git a/keyboards/s7_elephant/rev2/keymaps/default/readme.md b/keyboards/s7_elephant/rev2/keymaps/default/readme.md deleted file mode 100644 index c4fe30acdd5..00000000000 --- a/keyboards/s7_elephant/rev2/keymaps/default/readme.md +++ /dev/null @@ -1,35 +0,0 @@ -# Default keymap for S7 Elephant - -**Features** - -* LEDs are functioning as Caps-Lock indicators - -## QWERTY (Normal) Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | -|------| |-------------------------------------------------------------------------------------------------| -| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | -|------| |-------------------------------------------------------------------------------------------------| -| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | -|------| |-------------------------------------------------------------------------------------------------| -| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | -|------| |-------------------------------------------------------------------------------------------------| -| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | -`------' `-------------------------------------------------------------------------------------------------' -``` - -## FN Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | | | | -|------| |-------------------------------------------------------------------------------------------------| -| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | |PgDn | -|------| |-------------------------------------------------------------------------------------------------| -|EPRM | | | | | | | | | | | | -`------' `-------------------------------------------------------------------------------------------------' -``` diff --git a/keyboards/s7_elephant/rev2/keymaps/via/keymap.c b/keyboards/s7_elephant/rev2/keymaps/via/keymap.c deleted file mode 100644 index b81777b12ad..00000000000 --- a/keyboards/s7_elephant/rev2/keymaps/via/keymap.c +++ /dev/null @@ -1,92 +0,0 @@ -#include QMK_KEYBOARD_H - -// For readability -enum layer_names { - _BASE, - _FN1, - _FN2, - _FN3, -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - /* Default layer - * ,------. ,-------------------------------------------------------------------------------------------------. - * | F1 | | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | - * |------| |-------------------------------------------------------------------------------------------------| - * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | - * |------| |-------------------------------------------------------------------------------------------------| - * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter |Home | - * |------| |-------------------------------------------------------------------------------------------------| - * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | - * |------| |-------------------------------------------------------------------------------------------------| - * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | - * `------' `-------------------------------------------------------------------------------------------------' - */ - [_BASE] = LAYOUT_ansi_1u( - KC_F1, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, - KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - /* Fn1 Layer - * ,------. ,-------------------------------------------------------------------------------------------------. - * | F6 | | `~ | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | F7 | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | F8 | | |VolD |VolU |Mute | | | | | | | | | |PgUp | - * |------| |-------------------------------------------------------------------------------------------------| - * | F9 | | |Prev |Play |Next | | | | | | | | | |PgDn | - * |------| |-------------------------------------------------------------------------------------------------| - * | F10 | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - [_FN1] = LAYOUT_ansi_1u( - KC_F6, KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_F8, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, - KC_F9, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, - KC_F10, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - /* Fn2 Layer - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - [_FN2] = LAYOUT_ansi_1u( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - /* Fn3 Layer - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - [_FN3] = LAYOUT_ansi_1u( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; diff --git a/keyboards/s7_elephant/rev2/keymaps/via/readme.md b/keyboards/s7_elephant/rev2/keymaps/via/readme.md deleted file mode 100644 index c4fe30acdd5..00000000000 --- a/keyboards/s7_elephant/rev2/keymaps/via/readme.md +++ /dev/null @@ -1,35 +0,0 @@ -# Default keymap for S7 Elephant - -**Features** - -* LEDs are functioning as Caps-Lock indicators - -## QWERTY (Normal) Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | -|------| |-------------------------------------------------------------------------------------------------| -| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | -|------| |-------------------------------------------------------------------------------------------------| -| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | -|------| |-------------------------------------------------------------------------------------------------| -| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | -|------| |-------------------------------------------------------------------------------------------------| -| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | -`------' `-------------------------------------------------------------------------------------------------' -``` - -## FN Layer -``` -,------. ,-------------------------------------------------------------------------------------------------. -|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | | | | -|------| |-------------------------------------------------------------------------------------------------| -| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | -|------| |-------------------------------------------------------------------------------------------------| -| | | | | | | | | | | | | | | |PgDn | -|------| |-------------------------------------------------------------------------------------------------| -|EPRM | | | | | | | | | | | | -`------' `-------------------------------------------------------------------------------------------------' -``` diff --git a/keyboards/s7_elephant/rev2/keymaps/via/rules.mk b/keyboards/s7_elephant/rev2/keymaps/via/rules.mk deleted file mode 100644 index 1e5b99807cb..00000000000 --- a/keyboards/s7_elephant/rev2/keymaps/via/rules.mk +++ /dev/null @@ -1 +0,0 @@ -VIA_ENABLE = yes diff --git a/keyboards/s7_elephant/rev2/readme.md b/keyboards/s7_elephant/rev2/readme.md deleted file mode 100644 index 04cbafd96f5..00000000000 --- a/keyboards/s7_elephant/rev2/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# S7 Elephant - -![S7 Elephant](https://i.imgur.com/CaHxKBJ.jpg) - -A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. - -* Keyboard Maintainer: QMK Community -* Hardware Supported: S7 Elephant -* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) - -Make example for this keyboard (after setting up your build environment): - - make s7_elephant/rev2:default - -To enter the bootloader, either short the pins on the PCB next to CAPSLOCK or the press the RESET button on the FN layer. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s7_elephant/rev2/rev2.c b/keyboards/s7_elephant/rev2/rev2.c deleted file mode 100644 index 3e84aedd526..00000000000 --- a/keyboards/s7_elephant/rev2/rev2.c +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2020 MudkipMao - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "rev2.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/s7_elephant/rev2/rev2.h b/keyboards/s7_elephant/rev2/rev2.h deleted file mode 100644 index 16fe50aadbf..00000000000 --- a/keyboards/s7_elephant/rev2/rev2.h +++ /dev/null @@ -1,61 +0,0 @@ -#pragma once - -#include "quantum.h" - -#define ___ KC_NO - -/* ALL: This is an odd layout that the JSON file comes preloaded with. Split left-shift and ansi enter - * ,------. ,-------------------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |------| |-------------------------------------------------------------------------------------------------| - * | | | | | | | | | | | | | - * `------' `-------------------------------------------------------------------------------------------------' - */ - -#define LAYOUT_all( \ - K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ - K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ - K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ - K3F, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ - { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ -} - -/* ANSI - * ,---. ,---------------------------------------------------------------. - * | | | | | | | | | | | | | | | | | | - * |---| |---------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | | - * |---| |---------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |---| |---------------------------------------------------------------| - * | | | | | | | | | | | | | | | | | - * |---| |---------------------------------------------------------------| - * | | | | | | | | | | | | | - * `---' `---------------------------------------------------------------' - */ - -#define LAYOUT_ansi_1u( \ - K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \ - K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ - K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ - K3F, K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, ___, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ - { K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ - { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ -} diff --git a/keyboards/s7_elephant/rev2/rules.mk b/keyboards/s7_elephant/rev2/rules.mk deleted file mode 100644 index 381040642c1..00000000000 --- a/keyboards/s7_elephant/rev2/rules.mk +++ /dev/null @@ -1,32 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -LTO_ENABLE = yes diff --git a/keyboards/s7_elephant/rules.mk b/keyboards/s7_elephant/rules.mk deleted file mode 100644 index 318b6ee209c..00000000000 --- a/keyboards/s7_elephant/rules.mk +++ /dev/null @@ -1 +0,0 @@ -DEFAULT_FOLDER = s7_elephant/rev1 \ No newline at end of file From ba0b965c429da08c36d3aeb5cc8d93392720ff92 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 25 Feb 2021 07:23:29 +1100 Subject: [PATCH 140/145] ChibiOS conf upgrade for daji/seis_cinco (#12001) daji/seis_cinco - f9ce55c07a61f20308dab7eb5f4f2b7a91686625 --- keyboards/daji/seis_cinco/chconf.h | 729 ++-------------------------- keyboards/daji/seis_cinco/halconf.h | 525 -------------------- keyboards/daji/seis_cinco/mcuconf.h | 184 +------ keyboards/daji/seis_cinco/rules.mk | 1 + 4 files changed, 47 insertions(+), 1392 deletions(-) delete mode 100644 keyboards/daji/seis_cinco/halconf.h diff --git a/keyboards/daji/seis_cinco/chconf.h b/keyboards/daji/seis_cinco/chconf.h index 03f63da36a8..4f44ca6fa6e 100644 --- a/keyboards/daji/seis_cinco/chconf.h +++ b/keyboards/daji/seis_cinco/chconf.h @@ -1,714 +1,41 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/daji/seis_cinco/chconf.h -r platforms/chibios/common/configs/chconf.h` */ -/*===========================================================================*/ -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif +#pragma once -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif +#define CH_CFG_ST_FREQUENCY 10000 -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif +#define CH_CFG_OPTIMIZE_SPEED FALSE -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif +#define CH_CFG_USE_REGISTRY TRUE -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif +#define CH_CFG_USE_WAITEXIT TRUE -/** @} */ +#define CH_CFG_USE_CONDVARS TRUE -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE -/** @} */ +#define CH_CFG_USE_MESSAGES TRUE -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_USE_MAILBOXES TRUE -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/daji/seis_cinco/halconf.h b/keyboards/daji/seis_cinco/halconf.h deleted file mode 100644 index 16f32117d51..00000000000 --- a/keyboards/daji/seis_cinco/halconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/keyboards/daji/seis_cinco/mcuconf.h b/keyboards/daji/seis_cinco/mcuconf.h index 0e49478c8b0..3859833b6b1 100644 --- a/keyboards/daji/seis_cinco/mcuconf.h +++ b/keyboards/daji/seis_cinco/mcuconf.h @@ -1,176 +1,28 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. +/* Copyright 2020 QMK * - * IRQ priorities: - * 3...0 Lowest...Highest. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * DMA priorities: - * 0...3 Lowest...Highest. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define STM32F0xx_MCUCONF -// #define STM32F070xB - /* - * HAL driver system settings. + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/daji/seis_cinco/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#pragma once -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 +#include_next -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 TRUE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 - -#endif /* _MCUCONF_H_ */ diff --git a/keyboards/daji/seis_cinco/rules.mk b/keyboards/daji/seis_cinco/rules.mk index 9aa2f773392..fa34092cd73 100644 --- a/keyboards/daji/seis_cinco/rules.mk +++ b/keyboards/daji/seis_cinco/rules.mk @@ -1,5 +1,6 @@ # MCU name MCU = STM32F072 +BOARD = GENERIC_STM32_F072XB # Build Options # comment out to disable the options. From 23ef327e118307d276677d30e3fda064ace6713b Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 24 Feb 2021 10:35:08 -0800 Subject: [PATCH 141/145] make LAYOUT parsing more robust --- lib/python/qmk/c_parse.py | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index ade3e380596..89dd278b7e9 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -67,8 +67,10 @@ def find_layouts(file): layout = layout.strip() parsed_layout = [_default_key(key) for key in layout.split(',')] - for key in parsed_layout: - if key['label'] in matrix_locations: + for i, key in enumerate(parsed_layout): + if 'label' not in key: + cli.log.error('Invalid LAYOUT macro in %s: Empty parameter name in macro %s at pos %s.', file, macro_name, i) + elif key['label'] in matrix_locations: key['matrix'] = matrix_locations[key['label']] parsed_layouts[macro_name] = { From abe189377cd7af09041b54a7b3b19775f9ce8647 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Fri, 26 Feb 2021 17:07:05 +1100 Subject: [PATCH 142/145] [BUG] Massdrop develop rgb fix (#12022) * Allow for disabling RGB_MATRIX on Massdrop boards. * Fixup init sequence. * Make some functions static as they've got very generic names. --- keyboards/massdrop/ctrl/config_led.c | 2 +- quantum/quantum.c | 3 +++ tmk_core/common/keyboard.c | 3 --- tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 10 ++++++---- tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c | 4 +++- 5 files changed, 13 insertions(+), 9 deletions(-) diff --git a/keyboards/massdrop/ctrl/config_led.c b/keyboards/massdrop/ctrl/config_led.c index f711c6a4fe2..27ddb5c388e 100644 --- a/keyboards/massdrop/ctrl/config_led.c +++ b/keyboards/massdrop/ctrl/config_led.c @@ -79,4 +79,4 @@ void rgb_matrix_indicators_kb(void) } #endif // USB_LED_INDICATOR_ENABLE -#endif +#endif // RGB_MATRIX_ENABLE diff --git a/quantum/quantum.c b/quantum/quantum.c index 38234bb17b3..db99e80fa02 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -621,6 +621,9 @@ void matrix_init_quantum() { #ifdef AUDIO_ENABLE audio_init(); #endif +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init(); +#endif #if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) unicode_input_mode_init(); #endif diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c index 34fed0caba8..ce3255c0696 100644 --- a/tmk_core/common/keyboard.c +++ b/tmk_core/common/keyboard.c @@ -307,9 +307,6 @@ void keyboard_init(void) { #ifdef RGBLIGHT_ENABLE rgblight_init(); #endif -#ifdef RGB_MATRIX_ENABLE - rgb_matrix_init(); -#endif #ifdef ENCODER_ENABLE encoder_init(); #endif diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 0ea7e383955..eb71443b884 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#ifdef RGB_MATRIX_ENABLE #include "arm_atsam_protocol.h" #include "led.h" #include "rgb_matrix.h" @@ -196,7 +197,7 @@ void md_rgb_matrix_prepare(void) { } } -void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { +static void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { if (i < ISSI3733_LED_COUNT) { #ifdef USE_MASSDROP_CONFIGURATOR md_rgb_matrix_config_override(i); @@ -208,13 +209,13 @@ void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { } } -void led_set_all(uint8_t r, uint8_t g, uint8_t b) { +static void led_set_all(uint8_t r, uint8_t g, uint8_t b) { for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { led_set_one(i, r, g, b); } } -void init(void) { +static void init(void) { DBGC(DC_LED_MATRIX_INIT_BEGIN); issi3733_prepare_arrays(); @@ -227,7 +228,7 @@ void init(void) { DBGC(DC_LED_MATRIX_INIT_COMPLETE); } -void flush(void) { +static void flush(void) { #ifdef USE_MASSDROP_CONFIGURATOR if (!led_enabled) { return; @@ -470,3 +471,4 @@ static void md_rgb_matrix_config_override(int i) { } #endif // USE_MASSDROP_CONFIGURATOR +#endif // RGB_MATRIX_ENABLE \ No newline at end of file diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c index b43008cc5b5..1149cea7a19 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c @@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#ifdef RGB_MATRIX_ENABLE #ifdef USE_MASSDROP_CONFIGURATOR # include "md_rgb_matrix.h" @@ -96,4 +97,5 @@ void *led_setups[] = {leds_rainbow_s, leds_rainbow_ns, leds_teal_salmon, leds_ye const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); -#endif +#endif // USE_MASSDROP_CONFIGURATOR +#endif // RGB_MATRIX_ENABLE \ No newline at end of file From d99e3305486a398793daa275fdeddb605816ee7c Mon Sep 17 00:00:00 2001 From: "github-actions[bot]" <41898282+github-actions[bot]@users.noreply.github.com> Date: Fri, 26 Feb 2021 17:47:22 +1100 Subject: [PATCH 143/145] Format code according to conventions (#12024) Co-authored-by: QMK Bot --- tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 76 +++++++++---------- .../arm_atsam/md_rgb_matrix_programs.c | 8 +- 2 files changed, 42 insertions(+), 42 deletions(-) diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index eb71443b884..609ae047e64 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -16,16 +16,16 @@ along with this program. If not, see . */ #ifdef RGB_MATRIX_ENABLE -#include "arm_atsam_protocol.h" -#include "led.h" -#include "rgb_matrix.h" -#include -#include +# include "arm_atsam_protocol.h" +# include "led.h" +# include "rgb_matrix.h" +# include +# include -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR __attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}}; static void md_rgb_matrix_config_override(int i); -#endif // USE_MASSDROP_CONFIGURATOR +# endif // USE_MASSDROP_CONFIGURATOR void SERCOM1_0_Handler(void) { if (SERCOM1->I2CM.INTFLAG.bit.ERROR) { @@ -59,17 +59,17 @@ RGB led_buffer[ISSI3733_LED_COUNT]; uint8_t gcr_desired; uint8_t gcr_actual; uint8_t gcr_actual_last; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR uint8_t gcr_breathe; float breathe_mult; float pomod; -#endif +# endif -#define ACT_GCR_NONE 0 -#define ACT_GCR_INC 1 -#define ACT_GCR_DEC 2 +# define ACT_GCR_NONE 0 +# define ACT_GCR_INC 1 +# define ACT_GCR_DEC 2 -#define LED_GCR_STEP_AUTO 2 +# define LED_GCR_STEP_AUTO 2 static uint8_t gcr_min_counter; static uint8_t v_5v_cat_hit; @@ -79,11 +79,11 @@ void gcr_compute(void) { uint8_t action = ACT_GCR_NONE; uint8_t gcr_use = gcr_desired; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR if (led_animation_breathing) { gcr_use = gcr_breathe; } -#endif +# endif // If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over if (v_5v < V5_CAT) { @@ -151,7 +151,7 @@ void gcr_compute(void) { gcr_actual -= LED_GCR_STEP_AUTO; gcr_min_counter = 0; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR // If breathe mode is active, the top end can fluctuate if the host can not supply enough current // So set the breathe GCR to where it becomes stable if (led_animation_breathing == 1) { @@ -160,7 +160,7 @@ void gcr_compute(void) { // and the same would happen maybe one or two more times. Therefore I'm favoring // powering through one full breathe and letting gcr settle completely } -#endif +# endif } } } @@ -199,13 +199,13 @@ void md_rgb_matrix_prepare(void) { static void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { if (i < ISSI3733_LED_COUNT) { -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR md_rgb_matrix_config_override(i); -#else +# else led_buffer[i].r = r; led_buffer[i].g = g; led_buffer[i].b = b; -#endif +# endif } } @@ -229,15 +229,15 @@ static void init(void) { } static void flush(void) { -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR if (!led_enabled) { return; } // Prevent calculations and I2C traffic if LED drivers are not enabled -#else +# else if (!sr_exp_data.bit.SDB_N) { return; } // Prevent calculations and I2C traffic if LED drivers are not enabled -#endif +# endif // Wait for previous transfer to complete while (i2c_led_q_running) { @@ -250,7 +250,7 @@ static void flush(void) { *led_map[i].rgb.b = led_buffer[i].b; } -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR breathe_mult = 1; if (led_animation_breathing) { @@ -276,7 +276,7 @@ static void flush(void) { pomod = (uint32_t)pomod % 10000; pomod /= 100.0f; -#endif // USE_MASSDROP_CONFIGURATOR +# endif // USE_MASSDROP_CONFIGURATOR uint8_t drvid; @@ -296,21 +296,21 @@ void md_rgb_matrix_indicators(void) { if (kbled && rgb_matrix_config.enable) { for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { if ( -#if USB_LED_NUM_LOCK_SCANCODE != 255 +# if USB_LED_NUM_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_NUM_LOCK_SCANCODE && (kbled & (1 << USB_LED_NUM_LOCK))) || -#endif // NUM LOCK -#if USB_LED_CAPS_LOCK_SCANCODE != 255 +# endif // NUM LOCK +# if USB_LED_CAPS_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_CAPS_LOCK_SCANCODE && (kbled & (1 << USB_LED_CAPS_LOCK))) || -#endif // CAPS LOCK -#if USB_LED_SCROLL_LOCK_SCANCODE != 255 +# endif // CAPS LOCK +# if USB_LED_SCROLL_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_SCROLL_LOCK_SCANCODE && (kbled & (1 << USB_LED_SCROLL_LOCK))) || -#endif // SCROLL LOCK -#if USB_LED_COMPOSE_SCANCODE != 255 +# endif // SCROLL LOCK +# if USB_LED_COMPOSE_SCANCODE != 255 (led_map[i].scan == USB_LED_COMPOSE_SCANCODE && (kbled & (1 << USB_LED_COMPOSE))) || -#endif // COMPOSE -#if USB_LED_KANA_SCANCODE != 255 +# endif // COMPOSE +# if USB_LED_KANA_SCANCODE != 255 (led_map[i].scan == USB_LED_KANA_SCANCODE && (kbled & (1 << USB_LED_KANA))) || -#endif // KANA +# endif // KANA (0)) { if (rgb_matrix_get_flags() & LED_FLAG_INDICATOR) { led_buffer[i].r = 255 - led_buffer[i].r; @@ -328,7 +328,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se = Legacy Lighting Support = ==============================================================================*/ -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR // Ported from Massdrop QMK GitHub Repo // TODO?: wire these up to keymap.c @@ -470,5 +470,5 @@ static void md_rgb_matrix_config_override(int i) { led_buffer[i].b = (uint8_t)bo; } -#endif // USE_MASSDROP_CONFIGURATOR -#endif // RGB_MATRIX_ENABLE \ No newline at end of file +# endif // USE_MASSDROP_CONFIGURATOR +#endif // RGB_MATRIX_ENABLE \ No newline at end of file diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c index 1149cea7a19..92b40b5b855 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix_programs.c @@ -16,9 +16,9 @@ along with this program. If not, see . */ #ifdef RGB_MATRIX_ENABLE -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR -# include "md_rgb_matrix.h" +# include "md_rgb_matrix.h" // Teal <-> Salmon led_setup_t leds_teal_salmon[] = { @@ -97,5 +97,5 @@ void *led_setups[] = {leds_rainbow_s, leds_rainbow_ns, leds_teal_salmon, leds_ye const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); -#endif // USE_MASSDROP_CONFIGURATOR -#endif // RGB_MATRIX_ENABLE \ No newline at end of file +# endif // USE_MASSDROP_CONFIGURATOR +#endif // RGB_MATRIX_ENABLE \ No newline at end of file From 1581ea48dcd48d0d3f42cc09b388c468aedec45d Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 27 Feb 2021 12:00:50 -0800 Subject: [PATCH 144/145] Fix develop (#12039) Fixes file encoding errors on Windows, and layouts not correctly merging into info.json. * force utf8 encoding * correctly merge layouts and layout aliases * show what aliases point to --- data/schemas/keyboard.jsonschema | 12 +++++- lib/python/qmk/c_parse.py | 11 ++---- lib/python/qmk/cli/chibios/confmigrate.py | 8 ++-- lib/python/qmk/cli/generate/layouts.py | 4 ++ lib/python/qmk/cli/info.py | 7 +++- lib/python/qmk/cli/kle2json.py | 2 +- lib/python/qmk/info.py | 44 ++++++++++++++++----- lib/python/qmk/keymap.py | 6 +-- lib/python/qmk/os_helpers/linux/__init__.py | 2 +- lib/python/qmk/tests/test_cli_commands.py | 2 +- 10 files changed, 66 insertions(+), 32 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 967b5f9904a..f5fb611bd2d 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -85,8 +85,16 @@ "layout_aliases": { "type": "object", "additionalProperties": { - "type": "string", - "pattern": "^LAYOUT_[0-9a-z_]*$" + "oneOf": [ + { + "type": "string", + "enum": ["LAYOUT"] + }, + { + "type": "string", + "pattern": "^LAYOUT_[0-9a-z_]*$" + } + ] } }, "layouts": { diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index 89dd278b7e9..d4f39c8839c 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -46,7 +46,7 @@ def find_layouts(file): parsed_layouts = {} # Search the file for LAYOUT macros and aliases - file_contents = file.read_text() + file_contents = file.read_text(encoding='utf-8') file_contents = comment_remover(file_contents) file_contents = file_contents.replace('\\\n', '') @@ -87,12 +87,7 @@ def find_layouts(file): except ValueError: continue - # Populate our aliases - for alias, text in aliases.items(): - if text in parsed_layouts and 'KEYMAP' not in alias: - parsed_layouts[alias] = parsed_layouts[text] - - return parsed_layouts + return parsed_layouts, aliases def parse_config_h_file(config_h_file, config_h=None): @@ -104,7 +99,7 @@ def parse_config_h_file(config_h_file, config_h=None): config_h_file = Path(config_h_file) if config_h_file.exists(): - config_h_text = config_h_file.read_text() + config_h_text = config_h_file.read_text(encoding='utf-8') config_h_text = config_h_text.replace('\\\n', '') config_h_text = strip_multiline_comment(config_h_text) diff --git a/lib/python/qmk/cli/chibios/confmigrate.py b/lib/python/qmk/cli/chibios/confmigrate.py index 3e348b2b07e..89995931a46 100644 --- a/lib/python/qmk/cli/chibios/confmigrate.py +++ b/lib/python/qmk/cli/chibios/confmigrate.py @@ -40,7 +40,7 @@ file_header = """\ def collect_defines(filepath): - with open(filepath, 'r') as f: + with open(filepath, 'r', encoding='utf-8') as f: content = f.read() define_search = re.compile(r'(?m)^#\s*define\s+(?:.*\\\r?\n)*.*$', re.MULTILINE) value_search = re.compile(r'^#\s*define\s+(?P[a-zA-Z0-9_]+(\([^\)]*\))?)\s*(?P.*)', re.DOTALL) @@ -146,17 +146,17 @@ def chibios_confmigrate(cli): if cli.args.input.name == "chconf.h" and ("CHCONF_H" in input_defs["dict"] or "_CHCONF_H_" in input_defs["dict"] or cli.args.force): migrate_chconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: - with open(cli.args.input, "w") as out_file: + with open(cli.args.input, "w", encoding='utf-8') as out_file: migrate_chconf_h(to_override, outfile=out_file) elif cli.args.input.name == "halconf.h" and ("HALCONF_H" in input_defs["dict"] or "_HALCONF_H_" in input_defs["dict"] or cli.args.force): migrate_halconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: - with open(cli.args.input, "w") as out_file: + with open(cli.args.input, "w", encoding='utf-8') as out_file: migrate_halconf_h(to_override, outfile=out_file) elif cli.args.input.name == "mcuconf.h" and ("MCUCONF_H" in input_defs["dict"] or "_MCUCONF_H_" in input_defs["dict"] or cli.args.force): migrate_mcuconf_h(to_override, outfile=sys.stdout) if cli.args.overwrite: - with open(cli.args.input, "w") as out_file: + with open(cli.args.input, "w", encoding='utf-8') as out_file: migrate_mcuconf_h(to_override, outfile=out_file) diff --git a/lib/python/qmk/cli/generate/layouts.py b/lib/python/qmk/cli/generate/layouts.py index b7baae0651d..15b289522e5 100755 --- a/lib/python/qmk/cli/generate/layouts.py +++ b/lib/python/qmk/cli/generate/layouts.py @@ -82,6 +82,10 @@ def generate_layouts(cli): layouts_h_lines.append(rows) layouts_h_lines.append('}') + for alias, target in kb_info_json.get('layout_aliases', {}).items(): + layouts_h_lines.append('') + layouts_h_lines.append('#define %s %s' % (alias, target)) + # Show the results layouts_h = '\n'.join(layouts_h_lines) + '\n' diff --git a/lib/python/qmk/cli/info.py b/lib/python/qmk/cli/info.py index 87d7253d4b4..a7ce8abf035 100755 --- a/lib/python/qmk/cli/info.py +++ b/lib/python/qmk/cli/info.py @@ -29,7 +29,7 @@ def show_keymap(kb_info_json, title_caps=True): else: cli.echo('{fg_blue}keymap_%s{fg_reset}:', cli.config.info.keymap) - keymap_data = json.load(keymap_path.open()) + keymap_data = json.load(keymap_path.open(encoding='utf-8')) layout_name = keymap_data['layout'] for layer_num, layer in enumerate(keymap_data['layers']): @@ -57,7 +57,7 @@ def show_matrix(kb_info_json, title_caps=True): # Build our label list labels = [] for key in layout['layout']: - if key['matrix']: + if 'matrix' in key: row = ROW_LETTERS[key['matrix'][0]] col = COL_LETTERS[key['matrix'][1]] @@ -91,6 +91,9 @@ def print_friendly_output(kb_info_json): cli.echo('{fg_blue}Size{fg_reset}: %s x %s' % (kb_info_json['width'], kb_info_json['height'])) cli.echo('{fg_blue}Processor{fg_reset}: %s', kb_info_json.get('processor', 'Unknown')) cli.echo('{fg_blue}Bootloader{fg_reset}: %s', kb_info_json.get('bootloader', 'Unknown')) + if 'layout_aliases' in kb_info_json: + aliases = [f'{key}={value}' for key, value in kb_info_json['layout_aliases'].items()] + cli.echo('{fg_blue}Layout aliases:{fg_reset} %s' % (', '.join(aliases),)) if cli.config.info.layouts: show_layouts(kb_info_json, True) diff --git a/lib/python/qmk/cli/kle2json.py b/lib/python/qmk/cli/kle2json.py index 66d504bfc21..3bb74435828 100755 --- a/lib/python/qmk/cli/kle2json.py +++ b/lib/python/qmk/cli/kle2json.py @@ -27,7 +27,7 @@ def kle2json(cli): cli.log.error('File {fg_cyan}%s{style_reset_all} was not found.', file_path) return False out_path = file_path.parent - raw_code = file_path.open().read() + raw_code = file_path.read_text(encoding='utf-8') # Check if info.json exists, allow overwrite with force if Path(out_path, "info.json").exists() and not cli.args.force: cli.log.error('File {fg_cyan}%s/info.json{style_reset_all} already exists, use -f or --force to overwrite.', out_path) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 2accaba9e47..cf5dc6640b2 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -45,7 +45,12 @@ def info_json(keyboard): info_data['keymaps'][keymap.name] = {'url': f'https://raw.githubusercontent.com/qmk/qmk_firmware/master/{keymap}/keymap.json'} # Populate layout data - for layout_name, layout_json in _find_all_layouts(info_data, keyboard).items(): + layouts, aliases = _find_all_layouts(info_data, keyboard) + + if aliases: + info_data['layout_aliases'] = aliases + + for layout_name, layout_json in layouts.items(): if not layout_name.startswith('LAYOUT_kc'): layout_json['c_macro'] = True info_data['layouts'][layout_name] = layout_json @@ -92,7 +97,7 @@ def _json_load(json_file): Note: file must be a Path object. """ try: - return hjson.load(json_file.open()) + return hjson.load(json_file.open(encoding='utf-8')) except json.decoder.JSONDecodeError as e: cli.log.error('Invalid JSON encountered attempting to load {fg_cyan}%s{fg_reset}:\n\t{fg_red}%s', json_file, e) @@ -415,21 +420,28 @@ def _merge_layouts(info_data, new_info_data): def _search_keyboard_h(path): current_path = Path('keyboards/') + aliases = {} layouts = {} + for directory in path.parts: current_path = current_path / directory keyboard_h = '%s.h' % (directory,) keyboard_h_path = current_path / keyboard_h if keyboard_h_path.exists(): - layouts.update(find_layouts(keyboard_h_path)) + new_layouts, new_aliases = find_layouts(keyboard_h_path) + layouts.update(new_layouts) - return layouts + for alias, alias_text in new_aliases.items(): + if alias_text in layouts: + aliases[alias] = alias_text + + return layouts, aliases def _find_all_layouts(info_data, keyboard): """Looks for layout macros associated with this keyboard. """ - layouts = _search_keyboard_h(Path(keyboard)) + layouts, aliases = _search_keyboard_h(Path(keyboard)) if not layouts: # If we don't find any layouts from info.json or keyboard.h we widen our search. This is error prone which is why we want to encourage people to follow the standard above. @@ -437,11 +449,15 @@ def _find_all_layouts(info_data, keyboard): for file in glob('keyboards/%s/*.h' % keyboard): if file.endswith('.h'): - these_layouts = find_layouts(file) + these_layouts, these_aliases = find_layouts(file) + if these_layouts: layouts.update(these_layouts) - return layouts + if these_aliases: + aliases.update(these_aliases) + + return layouts, aliases def _log_error(info_data, message): @@ -540,11 +556,19 @@ def merge_info_jsons(keyboard, info_data): cli.log.error('\t%s: %s', json_path, e.message) continue - # Mark the layouts as coming from json - for layout in new_info_data.get('layouts', {}).values(): - layout['c_macro'] = False + # Merge layout data in + for layout_name, layout in new_info_data.get('layouts', {}).items(): + if layout_name in info_data['layouts']: + for new_key, existing_key in zip(layout['layout'], info_data['layouts'][layout_name]['layout']): + existing_key.update(new_key) + else: + layout['c_macro'] = False + info_data['layouts'][layout_name] = layout # Update info_data with the new data + if 'layouts' in new_info_data: + del (new_info_data['layouts']) + deep_update(info_data, new_info_data) return info_data diff --git a/lib/python/qmk/keymap.py b/lib/python/qmk/keymap.py index 266532f503b..d8495c38bcf 100644 --- a/lib/python/qmk/keymap.py +++ b/lib/python/qmk/keymap.py @@ -42,7 +42,7 @@ def template_json(keyboard): template_file = Path('keyboards/%s/templates/keymap.json' % keyboard) template = {'keyboard': keyboard} if template_file.exists(): - template.update(json.loads(template_file.read_text())) + template.update(json.load(template_file.open(encoding='utf-8'))) return template @@ -58,7 +58,7 @@ def template_c(keyboard): """ template_file = Path('keyboards/%s/templates/keymap.c' % keyboard) if template_file.exists(): - template = template_file.read_text() + template = template_file.read_text(encoding='utf-8') else: template = DEFAULT_KEYMAP_C @@ -469,7 +469,7 @@ def parse_keymap_c(keymap_file, use_cpp=True): if use_cpp: keymap_file = _c_preprocess(keymap_file) else: - keymap_file = keymap_file.read_text() + keymap_file = keymap_file.read_text(encoding='utf-8') keymap = dict() keymap['layers'] = _get_layers(keymap_file) diff --git a/lib/python/qmk/os_helpers/linux/__init__.py b/lib/python/qmk/os_helpers/linux/__init__.py index a04ac4f8a91..9e73964e477 100644 --- a/lib/python/qmk/os_helpers/linux/__init__.py +++ b/lib/python/qmk/os_helpers/linux/__init__.py @@ -95,7 +95,7 @@ def check_udev_rules(): # Collect all rules from the config files for rule_file in udev_rules: - for line in rule_file.read_text().split('\n'): + for line in rule_file.read_text(encoding='utf-8').split('\n'): line = line.strip() if not line.startswith("#") and len(line): current_rules.add(line) diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index 3efeddb85e8..82c42a20e85 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -16,7 +16,7 @@ def check_subcommand(command, *args): def check_subcommand_stdin(file_to_read, command, *args): """Pipe content of a file to a command and return output. """ - with open(file_to_read) as my_file: + with open(file_to_read, encoding='utf-8') as my_file: cmd = ['bin/qmk', command, *args] result = run(cmd, stdin=my_file, stdout=PIPE, stderr=STDOUT, universal_newlines=True) return result From 624359b725c9bfe8176cf72cdc2c8bbb7513949f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 27 Feb 2021 12:10:23 -0800 Subject: [PATCH 145/145] 2021 February 27 Breaking Changes Changelog (#11975) * restore main readme.md * add ChangeLog entry for 2021-02-27 develop branch - initial version * update Docs; consolidate sidebar entries to new Breaking Changes History doc * Changelog update - concatenate similar changes as one list item - unify change formatting (remove [bracketed] headings and trailing periods) - item sorting improvement * update Changes Requiring User Action section Detail the changes regarding keyboard relocations/additions/deletions. * add entry for fauxpark's user keymap cleanup for config.h/rules.mk * add link to Jacky Studio bugfix PR * add link for "ChibiOS conf migrations... take 15" * add links for "Make LAYOUT parsing more robust" and "Massdrop develop rgb fix" * remove sort sequence numbers * rename Breaking Changes History page Renames the Breaking Changes History page to "Past Breaking Changes". * update schedule in Breaking Changes Overview * suggestions/changes per tzarc * skully's changes * add entry for "Fix develop" (PR 12039) Co-authored-by: Nick Brassel Co-authored-by: Zach White --- docs/ChangeLog/20210227.md | 169 +++++++++++++++++++++++++++++++ docs/_summary.md | 8 +- docs/breaking_changes.md | 13 +-- docs/breaking_changes_history.md | 10 ++ readme.md | 6 -- 5 files changed, 188 insertions(+), 18 deletions(-) create mode 100644 docs/ChangeLog/20210227.md create mode 100644 docs/breaking_changes_history.md diff --git a/docs/ChangeLog/20210227.md b/docs/ChangeLog/20210227.md new file mode 100644 index 00000000000..cb34edfd913 --- /dev/null +++ b/docs/ChangeLog/20210227.md @@ -0,0 +1,169 @@ +# QMK Breaking Changes - 2021 February 27 Changelog + +## Changes Requiring User Action + +The following keyboards have had their source moved within QMK: + +Old Keyboard Name | New Keyboard Name +:---------------- | :---------------- +bear_65 | jacky_studio/bear_65 +s7_elephant/rev1 | jacky_studio/s7_elephant/rev1 +s7_elephant/rev2 | jacky_studio/s7_elephant/rev2 +aplx6 | aplyard/aplx6/rev1 +southpaw75 | fr4/southpaw75 + +The [Aplyard Aplx6 rev2](https://github.com/qmk/qmk_firmware/tree/0.12.0/keyboards/aplyard/aplx6/rev1) and the [FR4Boards Unix60](https://github.com/qmk/qmk_firmware/tree/0.12.0/keyboards/fr4/unix60) have also been added as part of these changes. + +Additionally, the `handwired/bluepill/bluepill70` keyboard has been removed. + +## Core Changes + +### ChibiOS Update and Config Migration + +QMK's ChibiOS and ChibiOS-Contrib submodules have been updated to version 20.3.2. + +Along with this, QMK now provides default configuration files for all commonly-supported ARM microcontrollers running on ChibiOS. As such, keyboards are now only required to define settings which differ from the defaults, thereby reducing the size of pull requests for keyboards running atop ChibiOS. + +### QMK Infrastructure and Internals + +Python is now required to build QMK. The minimum Python version has been increased to 3.7. + +The power of `info.json` has been massively expanded. Most keyboard parameters can now be expressed in `info.json` instead of `config.h`/`rules.mk`. This should make maintaining keyboards easier, and will enable tooling that can allow non-technical users to add and maintain QMK keyboards without writing any code. + +To ease migration a new command has been provided, `qmk generate-info-json -kb `. You can use this command to generate a complete `info.json` file for a keyboard and then remove the duplicate information from `config.h` and `rules.mk`. + +Detailed example showing how to generate a new info.json and identify duplicate keys: + +``` +user@hostname:~/qmk_firmware/keyboards/lets_split:0$ qmk generate-info-json > new-info.json +user@hostname:~/qmk_firmware/keyboards/lets_split:0$ mv new-info.json info.json +user@hostname:~/qmk_firmware/keyboards/lets_split:0$ qmk info +⚠ lets_split/rev2: DEBOUNCE in config.h is overwriting debounce in info.json +⚠ lets_split/rev2: DEVICE_VER in config.h is overwriting usb.device_ver in info.json +⚠ lets_split/rev2: DIODE_DIRECTION in config.h is overwriting diode_direction in info.json +⚠ lets_split/rev2: MANUFACTURER in config.h is overwriting manufacturer in info.json +⚠ lets_split/rev2: RGB_DI_PIN in config.h is overwriting rgblight.pin in info.json +⚠ lets_split/rev2: RGBLED_NUM in config.h is overwriting rgblight.led_count in info.json +⚠ lets_split/rev2: PRODUCT_ID in config.h is overwriting usb.pid in info.json +⚠ lets_split/rev2: VENDOR_ID in config.h is overwriting usb.vid in info.json +⚠ lets_split/rev2: Matrix pins are specified in both info.json and config.h, the config.h values win. +⚠ lets_split/rev2: LAYOUTS in rules.mk is overwriting community_layouts in info.json +⚠ lets_split/rev2: Feature bootmagic is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature mousekey is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature extrakey is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature console is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature command is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature nkro is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature backlight is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature midi is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature audio is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature unicode is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature bluetooth is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature rgblight is specified in both info.json and rules.mk, the rules.mk value wins. +⚠ lets_split/rev2: Feature sleep_led is specified in both info.json and rules.mk, the rules.mk value wins. +Keyboard Name: Let's Split +Manufacturer: Wootpatoot +Website: +Maintainer: QMK Community +Keyboard Folder: lets_split/rev2 +Layouts: LAYOUT, LAYOUT_ortho_4x12 +Size: 13 x 4 +Processor: atmega32u4 +Bootloader: caterina +``` + +## Detailed Change List + +### Changes Requiring User Action + +* Refactor Jacky's boards (Bear65 and S7 Elephant) ([#10528](https://github.com/qmk/qmk_firmware/pull/10528), [#11981](https://github.com/qmk/qmk_firmware/pull/11981)) +* Remove handwired/bluepill ([#11415](https://github.com/qmk/qmk_firmware/pull/11415)) +* Aplyard Aplx6 Added rev2 & move rev1+rev2 to parent folder ([#10973](https://github.com/qmk/qmk_firmware/pull/10973)) +* added `unix60`, moved together with `southpaw75` into `fr4` folder ([#11195](https://github.com/qmk/qmk_firmware/pull/11195)) + +### Fixes + +* GCC 10 can now compile Drop Alt firmware ([#9485](https://github.com/qmk/qmk_firmware/pull/9485)) +* Fix compiling on `develop` branch ([#11409](https://github.com/qmk/qmk_firmware/pull/11409)) +* Fix broken keyboards and keymaps ([#11412](https://github.com/qmk/qmk_firmware/pull/11412), [#11427](https://github.com/qmk/qmk_firmware/pull/11427), [#11448](https://github.com/qmk/qmk_firmware/pull/11448), [#11447](https://github.com/qmk/qmk_firmware/pull/11447), [#11473](https://github.com/qmk/qmk_firmware/pull/11473), [#11584](https://github.com/qmk/qmk_firmware/pull/11584), [#11600](https://github.com/qmk/qmk_firmware/pull/11600)) +* Fixed up build dependencies so that generated files are made available before compiling any object files ([#11435](https://github.com/qmk/qmk_firmware/pull/11435)) +* Formatting fixes ([`378edd9`](https://github.com/qmk/qmk_firmware/commit/378edd9491f2ab0d3d8a970c9a8e64bc03ca15cf), [#11594](https://github.com/qmk/qmk_firmware/pull/11594), [`27749e1`](https://github.com/qmk/qmk_firmware/commit/27749e1c967c02c05e62a89a0ae2776dd7e5158c)) +* Include `stdbool.h` in `uart.h` to fix compiler errors ([#11728](https://github.com/qmk/qmk_firmware/pull/11728)) +* Decouple USB events from the USB interrupt handler in ChibiOS ([#10437](https://github.com/qmk/qmk_firmware/pull/10437)) + * Fixes an issue while using Backlight and External EEPROM at the same time that would cause the MCU to lock up. +* Address wake from sleep instability ([#11450](https://github.com/qmk/qmk_firmware/pull/11450)) +* Fix pressing media key on a momentarily activated layer may lead to missing key up events ([#11162](https://github.com/qmk/qmk_firmware/pull/11162)) +* Fix an RGB initialisation bug on Massdrop keyboards ([#12022](https://github.com/qmk/qmk_firmware/pull/12022)) +* Fix file encoding errors on Windows, and layouts not correctly merging into info.json ([#12039](https://github.com/qmk/qmk_firmware/pull/12039)) + +### Additions and Enhancements + +* Allow configuration of serial USART timeout ([#11057](https://github.com/qmk/qmk_firmware/pull/11057)) +* Added Sync Timer feature for Split Common keyboards ([#10997](https://github.com/qmk/qmk_firmware/pull/10997)) +* Add modifier state to the Split Common transport ([#10400](https://github.com/qmk/qmk_firmware/pull/10400)) +* Add Pix keyboard by sendz (`sendyyeah/pix`) ([#11154](https://github.com/qmk/qmk_firmware/pull/11154)) +* Implement option for kinetic mouse movement algorithm for mouse keys ([#6739](https://github.com/qmk/qmk_firmware/pull/6739)) +* Improved Language Specific Keycodes for US International and Extended Layouts ([#11307](https://github.com/qmk/qmk_firmware/pull/11307)) +* Modified `QWIIC_ENABLE` in `rules.mk` to be yes/no choice, adding `QWIIC_DRIVERS` to allow for inclusion of specific drivers ([#11426](https://github.com/qmk/qmk_firmware/pull/11426)) +* Allow AVR-based keyboards to override the `bootloader_jump` function ([#11418](https://github.com/qmk/qmk_firmware/pull/11418)) +* Refine RGBLight Twinkle effect to be smoother (use breathing curve) ([#11350](https://github.com/qmk/qmk_firmware/pull/11350)) +* Keep track of last matrix activity ([#10730](https://github.com/qmk/qmk_firmware/pull/10730), [`ab375d3`](https://github.com/qmk/qmk_firmware/commit/ab375d3d075c105f09a1ddd0e155f178225518bc), [#11552](https://github.com/qmk/qmk_firmware/pull/11552)) +* fix `matrix_io_delay()` timing in `quantum/matrix.c` ([#9603](https://github.com/qmk/qmk_firmware/pull/9603)) +* Keep track of encoder activity ([#11595](https://github.com/qmk/qmk_firmware/pull/11595)) +* Backport ChibiOS Audio changes from ZSA ([#11687](https://github.com/qmk/qmk_firmware/pull/11687)) +* Add support for 8 buttons to mouse report ([#10807](https://github.com/qmk/qmk_firmware/pull/10807)) +* Allow `post_config.h` to be implemented in userspace ([#11519](https://github.com/qmk/qmk_firmware/pull/11519)) +* Adds AT90USB162 support ([#11570](https://github.com/qmk/qmk_firmware/pull/11570)) +* Stop sounds when suspended ([#11553](https://github.com/qmk/qmk_firmware/pull/11553)) +* Revamp spidey3 userspace and keymaps ([#11768](https://github.com/qmk/qmk_firmware/pull/11768)) +* Add support for analog USBPD on STM32G4xx ([#11824](https://github.com/qmk/qmk_firmware/pull/11824)) +* Master matrix can now be transported to the slave side in Split Common keyboards ([#11046](https://github.com/qmk/qmk_firmware/pull/11046)) +* RGBLight: Allow configurable default settings ([#11912](https://github.com/qmk/qmk_firmware/pull/11912)) +* Add `tap_code_delay(code, delay)` ([#11913](https://github.com/qmk/qmk_firmware/pull/11913), [#11938](https://github.com/qmk/qmk_firmware/pull/11938)) + +### Clean-ups and Optimizations + +* Fix duplicate `I2C_KEYMAP_START` define ([#11237](https://github.com/qmk/qmk_firmware/pull/11237)) +* Rewrite APA102 support for RGBLight ([#10894](https://github.com/qmk/qmk_firmware/pull/10894)) +* Update ADB Protocol implementation in TMK Core ([#11168](https://github.com/qmk/qmk_firmware/pull/11168)) +* Remove unused `action_get_macro()` usages in user files ([#11165](https://github.com/qmk/qmk_firmware/pull/11165)) +* Remove `QMK_KEYBOARD_CONFIG_H` ([#11576](https://github.com/qmk/qmk_firmware/pull/11576)) +* Remove duplicated housekeeping in `arm_atsam` ([#11672](https://github.com/qmk/qmk_firmware/pull/11672)) +* UART driver refactor ([#11637](https://github.com/qmk/qmk_firmware/pull/11637)) +* Move `transport.c` to `QUANTUM_LIB_SRC` ([#11751](https://github.com/qmk/qmk_firmware/pull/11751)) +* Remove `MIDI_ENABLE_STRICT` from user keymaps ([#11750](https://github.com/qmk/qmk_firmware/pull/11750)) +* Remove legacy print backward compatiblitly ([#11805](https://github.com/qmk/qmk_firmware/pull/11805)) +* Migrate mousekey to quantum ([#11804](https://github.com/qmk/qmk_firmware/pull/11804)) +* remove deprecated `qmk json-keymap` ([#11823](https://github.com/qmk/qmk_firmware/pull/11823)) +* Remove FAUXCLICKY feature (deprecated) ([#11829](https://github.com/qmk/qmk_firmware/pull/11829)) +* Refactor platform logic within `print.h` ([#11863](https://github.com/qmk/qmk_firmware/pull/11863)) +* Audio system overhaul ([#11820](https://github.com/qmk/qmk_firmware/pull/11820)) +* Output selection: Remove "USB and BT" option for Bluetooth ([#11940](https://github.com/qmk/qmk_firmware/pull/11940)) +* `tmk_core/common/action.c`: refactor for code size; merge multiple `case`s into one ([#11943](https://github.com/qmk/qmk_firmware/pull/11943)) +* Remove rules and settings from user keymaps that are already defined at keyboard level ([#11966](https://github.com/qmk/qmk_firmware/pull/11966)) + +### QMK Infrastructure and Internals + +* bump to python 3.7 ([#11408](https://github.com/qmk/qmk_firmware/pull/11408)) +* `develop` branch is now formatted as part of CI tasks ([#11893](https://github.com/qmk/qmk_firmware/pull/11893), [#11905](https://github.com/qmk/qmk_firmware/pull/11905), [#11907](https://github.com/qmk/qmk_firmware/pull/11907), [#11928](https://github.com/qmk/qmk_firmware/pull/11928), [#11936](https://github.com/qmk/qmk_firmware/pull/11936)) +* Configure keyboard matrix from info.json ([#10817](https://github.com/qmk/qmk_firmware/pull/10817)) +* Validate our JSON data using json_schema ([#11101](https://github.com/qmk/qmk_firmware/pull/11101)) +* Use the schema to eliminate custom code ([#11108](https://github.com/qmk/qmk_firmware/pull/11108)) +* Add support for specifying BOARD in `info.json` ([#11492](https://github.com/qmk/qmk_firmware/pull/11492)) +* Document how to add data driven configurations ([#11502](https://github.com/qmk/qmk_firmware/pull/11502)) +* Process info.json rules ahead of userspace rules ([#11542](https://github.com/qmk/qmk_firmware/pull/11542)) +* Remove duplicate manufacturer definitions ([#11544](https://github.com/qmk/qmk_firmware/pull/11544)) +* Update list of MCUs in `keyboard.jsonschema` to mirror `qmk.constants.py` ([#11688](https://github.com/qmk/qmk_firmware/pull/11688)) +* Create a system to map between `info.json` and `config.h`/`rules.mk` ([#11548](https://github.com/qmk/qmk_firmware/pull/11548)) +* Make LAYOUT parsing more robust ([#12000](https://github.com/qmk/qmk_firmware/pull/12000)) + + +### ChibiOS Update and Config Migration + +* Add board specific to Proton-C, with usual defaults turned on to match Pro-Micro ([#10976](https://github.com/qmk/qmk_firmware/pull/10976)) +* Disable almost all ChibiOS subsystems in default configs ([#11111](https://github.com/qmk/qmk_firmware/pull/11111)) +* Config Migrations ([#10418](https://github.com/qmk/qmk_firmware/pull/10418), [#11123](https://github.com/qmk/qmk_firmware/pull/11123), [#11261](https://github.com/qmk/qmk_firmware/pull/11261), [#11413](https://github.com/qmk/qmk_firmware/pull/11413), [#11414](https://github.com/qmk/qmk_firmware/pull/11414), [#11495](https://github.com/qmk/qmk_firmware/pull/11495), [#11504](https://github.com/qmk/qmk_firmware/pull/11504), [#11529](https://github.com/qmk/qmk_firmware/pull/11529), [#11588](https://github.com/qmk/qmk_firmware/pull/11588), [#11598](https://github.com/qmk/qmk_firmware/pull/11598), [#11607](https://github.com/qmk/qmk_firmware/pull/11607), [#11617](https://github.com/qmk/qmk_firmware/pull/11617), [#11620](https://github.com/qmk/qmk_firmware/pull/11620), [#11630](https://github.com/qmk/qmk_firmware/pull/11630), [#11646](https://github.com/qmk/qmk_firmware/pull/11646), [#11689](https://github.com/qmk/qmk_firmware/pull/11689), [#11846](https://github.com/qmk/qmk_firmware/pull/11846), [#11927](https://github.com/qmk/qmk_firmware/pull/11927), [#12001](https://github.com/qmk/qmk_firmware/pull/12001)) +* Disable subsystems repo-wide ([#11449](https://github.com/qmk/qmk_firmware/pull/11449)) +* Leftover early initialisation conversions ([#11615](https://github.com/qmk/qmk_firmware/pull/11615)) +* Fix up comments showing how to execute config migration ([#11621](https://github.com/qmk/qmk_firmware/pull/11621)) +* Add STM32G431 and STM32G474 board definitions ([#11793](https://github.com/qmk/qmk_firmware/pull/11793)) diff --git a/docs/_summary.md b/docs/_summary.md index acbfcfaeda5..83799acdb8b 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -119,12 +119,8 @@ * Breaking Changes * [Overview](breaking_changes.md) * [My Pull Request Was Flagged](breaking_changes_instructions.md) - * History - * [2020 Nov 28](ChangeLog/20201128.md) - * [2020 Aug 29](ChangeLog/20200829.md) - * [2020 May 30](ChangeLog/20200530.md) - * [2020 Feb 29](ChangeLog/20200229.md) - * [2019 Aug 30](ChangeLog/20190830.md) + * [Most Recent ChangeLog](ChangeLog/20210227.md "QMK v0.12.0 - 2021 Feb 27") + * [Past Breaking Changes](breaking_changes_history.md) * C Development * [ARM Debugging Guide](arm_debugging.md) diff --git a/docs/breaking_changes.md b/docs/breaking_changes.md index 3ee14f2bfcf..de9148ad62d 100644 --- a/docs/breaking_changes.md +++ b/docs/breaking_changes.md @@ -6,6 +6,7 @@ The breaking change period is when we will merge PR's that change QMK in dangero ## What has been included in past Breaking Changes? +* [2021 Feb 27](ChangeLog/20210227.md) * [2020 Nov 28](ChangeLog/20201128.md) * [2020 Aug 29](ChangeLog/20200829.md) * [2020 May 30](ChangeLog/20200530.md) @@ -18,12 +19,12 @@ The next Breaking Change is scheduled for February 27, 2021. ### Important Dates -* [x] 2020 Nov 28 - `develop` is created. Each push to `master` is subsequently merged to `develop` -* [ ] 2021 Jan 30 - `develop` closed to new PR's. -* [ ] 2021 Jan 30 - Call for testers. -* [ ] 2021 Feb 25 - `master` is locked, no PR's merged. -* [ ] 2021 Feb 27 - Merge `develop` to `master`. -* [ ] 2021 Feb 27 - `master` is unlocked. PR's can be merged again. +* [x] 2021 Feb 27 - `develop` is created. Each push to `master` is subsequently merged to `develop` +* [ ] 2021 May 01 - `develop` closed to new PR's. +* [ ] 2021 May 01 - Call for testers. +* [ ] 2021 May 27 - `master` is locked, no PR's merged. +* [ ] 2021 May 29 - Merge `develop` to `master`. +* [ ] 2021 May 29 - `master` is unlocked. PR's can be merged again. ## What changes will be included? diff --git a/docs/breaking_changes_history.md b/docs/breaking_changes_history.md new file mode 100644 index 00000000000..dd474f1bb7c --- /dev/null +++ b/docs/breaking_changes_history.md @@ -0,0 +1,10 @@ +# Past Breaking Changes + +This page links to all previous changelogs from the QMK Breaking Changes process. + +* [2021 Feb 27](ChangeLog/20210227.md) - version 0.12.0 +* [2020 Nov 28](ChangeLog/20201128.md) - version 0.11.0 +* [2020 Aug 29](ChangeLog/20200829.md) - version 0.10.0 +* [2020 May 30](ChangeLog/20200530.md) - version 0.9.0 +* [2020 Feb 29](ChangeLog/20200229.md) - version 0.8.0 +* [2019 Aug 30](ChangeLog/20190830.md) - version 0.7.0 diff --git a/readme.md b/readme.md index 6321681a924..6092f209be1 100644 --- a/readme.md +++ b/readme.md @@ -7,12 +7,6 @@ [![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly) [![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/) -# THIS IS THE DEVELOP BRANCH - -Warning- This is the `develop` branch of QMK Firmware. You may encounter broken code here. Please see [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) for more information. - -# Original readme continues - This is a keyboard firmware based on the [tmk\_keyboard firmware](https://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](https://ergodox-ez.com) keyboard, and the [Clueboard product line](https://clueboard.co). ## Documentation