mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-17 21:22:05 +00:00
Merge branch 'master' of https://github.com/qmk/qmk_firmware
This commit is contained in:
Takeshi Nishio
commit
16f62b4368
@ -129,7 +129,7 @@ Configure the hardware via your `config.h`:
|
||||
From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
|
||||
|
||||
```c
|
||||
const led_config_t g_led_config = { {
|
||||
led_config_t g_led_config = { {
|
||||
// Key Matrix to LED Index
|
||||
{ 5, NO_LED, NO_LED, 0 },
|
||||
{ NO_LED, NO_LED, NO_LED, NO_LED },
|
||||
|
||||
195
docs/ja/tap_hold.md
Normal file
195
docs/ja/tap_hold.md
Normal file
@ -0,0 +1,195 @@
|
||||
# タップホールド設定オプション
|
||||
|
||||
<!---
|
||||
original document: 0.9.51:docs/tap_hold.md
|
||||
git diff 0.9.51 HEAD -- docs/tap_hold.md | cat
|
||||
-->
|
||||
|
||||
タップホールドオプションは素晴らしいものですが、問題が無いわけではありません。デフォルト設定を適切なものにしようとしましたが、一部の人にとってまだ問題を引き起こすかもしれません。
|
||||
|
||||
次のオプションによりタップホールドキーの挙動を変更することができます。
|
||||
|
||||
## タッピング時間
|
||||
|
||||
以下の機能の全ての核心は、タッピング時間の設定です。これにより、何をタップとし、何をホールドとするかが決まります。これが自然に感じられるぴったりのタイミングは、キーボードごと、スイッチごと、あるいはキーごとに異ることもありえます。
|
||||
|
||||
`config.h` に以下の設定を追加することで、この時間を全体的に設定することができます:
|
||||
|
||||
```c
|
||||
#define TAPPING_TERM 200
|
||||
```
|
||||
|
||||
この設定はミリ秒で定義され、デフォルトは 200ms です。これは大多数の人にとっての適切な平均値です。
|
||||
|
||||
この機能をより細かく制御するために、以下を `config.h` に追加することができます:
|
||||
```c
|
||||
#define TAPPING_TERM_PER_KEY
|
||||
```
|
||||
|
||||
そして、以下の関数をキーマップに追加します:
|
||||
|
||||
```c
|
||||
uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case SFT_T(KC_SPC):
|
||||
return TAPPING_TERM + 1250;
|
||||
case LT(1, KC_GRV):
|
||||
return 130;
|
||||
default:
|
||||
return TAPPING_TERM;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
|
||||
## 許容ホールド
|
||||
|
||||
[PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/) 以降、新しい `config.h` オプションがあります:
|
||||
|
||||
```c
|
||||
#define PERMISSIVE_HOLD
|
||||
```
|
||||
|
||||
これは高速なタイピストや高い `TAPPING_TERM` 設定に対して、タップとホールドキー(モッドタップのような)の動作を向上させます。
|
||||
|
||||
モッドタップキーを押し、他のキーをタップ(押して放す)して、モッドタップキーを放すという動作の全てをタッピング時間内に行うと、両方のキーの「タッピング」機能が出力されます。
|
||||
|
||||
例えば:
|
||||
|
||||
- `SFT_T(KC_A)` を押す
|
||||
- `KC_X` を押す
|
||||
- `KC_X` を放す
|
||||
- `SFT_T(KC_A)` を放す
|
||||
|
||||
通常、これら全てを `TAPPING_TERM` (デフォルト: 200ms) 内で行うと、ファームウェアとホストシステムによって `ax` として登録されます。許容ホールドを有効にすると、別のキーがタップされた場合にモッドタップキーを修飾キーと見なすように処理を変更し、 `X` (`SHIFT`+`x`) と登録されます。
|
||||
|
||||
?> `モッドタップ割り込みの無視`を有効にしている場合、これにより両方の動きが変更されます。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
|
||||
|
||||
この機能をより細かく制御するために、以下を `config.h` に追加することができます:
|
||||
|
||||
```c
|
||||
#define PERMISSIVE_HOLD_PER_KEY
|
||||
```
|
||||
|
||||
そして、以下の関数をキーマップに追加します:
|
||||
|
||||
```c
|
||||
bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case LT(1, KC_BSPC):
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
## モッドタップ割り込みの無視
|
||||
|
||||
この設定を有効にするには、これを `config.h` に追加してください:
|
||||
|
||||
```c
|
||||
#define IGNORE_MOD_TAP_INTERRUPT
|
||||
```
|
||||
|
||||
許容ホールドと同様に、これは高速なタイピストのためのファームウェアの処理方法を変更します。モッドタップキーを押し、他のキーを押し、モッドタップキーを放し、通常のキーを放すと、通常は両方のキーの「タッピング」機能が出力されます。これはローリングコンボキーには望ましくないかもしれません。
|
||||
|
||||
`モッドタップ割り込みの無視`を設定するには、両方のキーを `TAPPING_TERM` の間ホールドすると、(その修飾キーの)ホールド機能を実行する必要があります。
|
||||
|
||||
例えば:
|
||||
|
||||
- `SFT_T(KC_A)` を押す
|
||||
- `KC_X` を押す
|
||||
- `SFT_T(KC_A)` を放す
|
||||
- `KC_X` を放す
|
||||
|
||||
通常、これは `X` (`SHIFT`+`x`) を送信します。`モッドタップ割り込みの無視` を有効にすると、ホールドアクションを登録するには、両方のキーを `TAPPING_TERM` の間ホールドする必要があります。この場合、素早いタップは `ax` を送信しますが、両方をホールドすると、`X` (`SHIFT`+`x`) を出力します。
|
||||
|
||||
|
||||
?> __注意__: これはモディファイアにのみ関係し、レイヤー切り替えキーには関係しません。
|
||||
|
||||
?> `許容ホールド`を有効にすると、これは両方がどのように動作するかを変更します。通常のキーには、最初のキーが最初に放された場合、あるいは両方のキーが `TAPPING_TERM` より長くホールドされた場合に、修飾キーが追加されます。
|
||||
|
||||
この機能をより細かく制御するために、以下を `config.h` に追加することができます:
|
||||
|
||||
```c
|
||||
#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
|
||||
```
|
||||
|
||||
そして、以下の関数をキーマップに追加します:
|
||||
|
||||
```c
|
||||
bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case SFT_T(KC_SPC):
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
## タッピング強制ホールド
|
||||
|
||||
`タッピング強制ホールド` を有効にするには、以下を `config.h` に追加します:
|
||||
|
||||
```c
|
||||
#define TAPPING_FORCE_HOLD
|
||||
```
|
||||
|
||||
タップの後でユーザがキーをホールドすると、これは修飾キーをホールドするかわりにタップされたキーを繰り返します。これにより、タップされたキーのために自動繰り返しを使うことができます。
|
||||
|
||||
例:
|
||||
|
||||
- SFT_T(KC_A) を押す
|
||||
- SFT_T(KC_A) を放す
|
||||
- SFT_T(KC_A) を押す
|
||||
- タッピング時間より長く待ちます...
|
||||
- SFT_T(KC_A) を放す
|
||||
|
||||
デフォルトの設定では、最初に放したときに `a` が送信され、2回目の押下で `a` が送信され、コンピュータに自動リピート機能を作動させることができます。
|
||||
|
||||
`TAPPING_FORCE_HOLD` を使うと、2回目の押下は Shift として解釈され、それをタップして使った後ですぐに修飾キーとして使うことができます。
|
||||
|
||||
!> `TAPPING_FORCE_HOLD` はタッピングトグル(`TT` レイヤーキーコード、ワンショットタッピングトグルなど)を使うものをすべて破壊します。
|
||||
|
||||
この機能をより細かく制御するために、以下を `config.h` に追加することができます:
|
||||
|
||||
```c
|
||||
#define TAPPING_FORCE_HOLD_PER_KEY
|
||||
```
|
||||
|
||||
そして、以下の関数をキーマップに追加します:
|
||||
|
||||
```c
|
||||
bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case LT(1, KC_BSPC):
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
## レトロタッピング
|
||||
|
||||
`レトロタッピング`を有効にするには、以下を `config.h` に追加してください:
|
||||
|
||||
```c
|
||||
#define RETRO_TAPPING
|
||||
```
|
||||
|
||||
他のキーを押さずにデュアルファンクションキーを押して放しても何も起こりません。レトロタッピングを有効にすると、他のキーを押さずにキーを放すと、元のキーコードがタッピング時間外であっても送信されます。
|
||||
|
||||
例えば、他のキーを押すことなく `LT(2, KC_SPACE)` を押したり放したりしても何も起こりません。これを有効にすると、代わりに `KC_SPACE` を送信します。
|
||||
|
||||
## キー別の関数にキーレコードを含めるのはなぜですか？
|
||||
|
||||
「キー別」の関数全てにキーレコードを含んでいることに気付いたかもしれません。そしてなぜそうしたのか不思議に思っているかもしれません。
|
||||
|
||||
まぁ、それは単純に本当にカスタマイズのためです。ただし、具体的には、それはキーボードの配線方法によって異なります。例えば、各行が実際にキーボードのマトリックスの1行を使っている場合、キーコード全体をチェックする代わりに、`if (record->event.row == 3)` を使うほうが簡単かもしれません。これは、ホームキー行でタップホールドタイプのキーを使っている人にとって特に便利です。そのため、通常のタイピングを妨げないように微調整することができるのではないでしょうか。
|
||||
|
||||
## `*_kb` や `*_user` 関数が無いのはなぜですか？
|
||||
|
||||
QMK にある他の多くの関数とは異なり、quantum あるいはキーボードレベルの関数を持つ必要はありません (または理由さえありません)。ここではユーザレベルの関数だけが有用なため、そのようにマークする必要はありません。
|
||||
95
keyboards/dz60/keymaps/coppertop/keymap.c
Normal file
95
keyboards/dz60/keymaps/coppertop/keymap.c
Normal file
@ -0,0 +1,95 @@
|
||||
/* Copyright 2020 Philip Chan
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
enum layer_names {
|
||||
_QWERTY,
|
||||
_FN,
|
||||
_MEDIA,
|
||||
};
|
||||
|
||||
//Custom Keymap Definitions
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty Base layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BSpc| Del |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | `/_Media| A | S | D | F | G | H | J | K | L | ; | ' | Enter |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / |Home | Up |End |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | LCtrl | LGui | LAlt | Space | Fn | Space | F7 | F10 |Left |Down |Right|
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_QWERTY] = LAYOUT_directional(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
LT(_MEDIA,KC_GRV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_HOME, KC_UP, KC_END,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_SPC, KC_F7, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
/* F-Key/Lighting/whatever layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | | Ins |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | |R_Tog|R_HUI|R_SAI|R_VAI| | | | | | | | | KC_CAD |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Caps | |R_HUD|R_SAD| | | | | | | SLCK|PAUSE| Print Screen|
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | |R_M_P|R_M_B|R_M_R|R_M_SW|R_M_S|R_M_K|R_M_X|R_M_G| | |PgUp |BLUP |PgDn |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | | | | | | | |BLTog|BLDN |BLInc|
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_FN] = LAYOUT_directional(
|
||||
XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_INS,
|
||||
XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAD,
|
||||
KC_CAPS, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PSCR,
|
||||
_______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, XXXXXXX, XXXXXXX, KC_PGUP, BL_INC, KC_PGDN,
|
||||
_______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, BL_TOGG, BL_DEC, BL_STEP
|
||||
),
|
||||
|
||||
/* SFX/Multimedia/Numpad layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | | | | | | | | | / | * | - | = | |Trns |Trns |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | | Prev | Play| Next| | | 7 | 8 | 9 | + | | | RESET |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | |Mute | VUp | VDn | | | 4 | 5 | 6 | + | | Trns |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | | | | | | | 1 | 2 | 3 |NumEN| | | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns | Trns | Trns | Trns | | 0 | . | | | | |
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_MEDIA] = LAYOUT_directional(
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_PAST, KC_PMNS, KC_PEQL, XXXXXXX, _______, _______,
|
||||
XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, RESET,
|
||||
_______, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PPLS, XXXXXXX, _______,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_PENT, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, KC_P0, KC_PDOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
|
||||
)
|
||||
};
|
||||
1
keyboards/dz60/keymaps/coppertop/rules.mk
Normal file
1
keyboards/dz60/keymaps/coppertop/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
BOOTMAGIC_ENABLE = no
|
||||
95
keyboards/dz60/keymaps/spotpuff/keymap.c
Normal file
95
keyboards/dz60/keymaps/spotpuff/keymap.c
Normal file
@ -0,0 +1,95 @@
|
||||
/* Copyright 2020 Philip Chan
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
//Layers
|
||||
enum layer_names {
|
||||
_QWERTY,
|
||||
_FN,
|
||||
_MEDIA,
|
||||
};
|
||||
|
||||
//Custom Keymap Definitions
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Qwerty Base layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BSpc| Del |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | `/_Media| A | S | D | F | G | H | J | K | L | ; | ' | Enter |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / |PgUp | Up |PgDn |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | LCtrl | LGui | LAlt | Space | Fn | Space |Home | End |Left |Down |Right|
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_QWERTY] = LAYOUT_directional(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
LT(_MEDIA,KC_GRV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_PGUP, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_SPC, KC_HOME, KC_END, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
/* F-Key/Lighting/whatever layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | | Ins |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | |R_Tog|R_HUI|R_SAI|R_VAI| | | | | | | | | KC_CAD |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Caps | |R_HUD|R_SAD| | | | | | | SLCK|PAUSE| Print Screen|
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns |R_M_P|R_M_B|R_M_R|R_M_SW|R_M_S|R_M_K|R_M_X|R_M_G| | | |BLUP | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns | Trns | Trns | | Trns | | | |BLTog|BLDN |BLInc|
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_FN] = LAYOUT_directional(
|
||||
XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_INS,
|
||||
XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAD,
|
||||
KC_CAPS, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PSCR,
|
||||
_______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, XXXXXXX, XXXXXXX, XXXXXXX, BL_INC, XXXXXXX,
|
||||
_______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, BL_TOGG, BL_DEC, BL_STEP
|
||||
),
|
||||
|
||||
/* SFX/Multimedia/Numpad layer
|
||||
* ,-----------------------------------------------------------------------------------------.
|
||||
* | | | | | | |NumLk| | / | * | - | = | |Trns |Trns |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | | | Prev | Play| Next| | | 7 | 8 | 9 | + | | | RESET |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns | |Mute | VUp | VDn | | | 4 | 5 | 6 | + | | Trns |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns | | | | | | | 1 | 2 | 3 |NumEN| | | |
|
||||
* |-----------------------------------------------------------------------------------------+
|
||||
* | Trns | Trns | Trns | Trns | Trns | 0 | . | | | | |
|
||||
* `----------------------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_MEDIA] = LAYOUT_directional(
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK, XXXXXXX, KC_PSLS, KC_PAST, KC_PMNS, KC_PEQL, XXXXXXX, _______, _______,
|
||||
XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, KC_P7, KC_P8, KC_P9, KC_PPLS, XXXXXXX, XXXXXXX, RESET,
|
||||
_______, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, KC_P4, KC_P5, KC_P6, KC_PPLS, XXXXXXX, _______,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_P1, KC_P2, KC_P3, KC_PENT, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
_______, _______, _______, _______, _______, KC_P0, KC_PDOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
|
||||
)
|
||||
};
|
||||
1
keyboards/dz60/keymaps/spotpuff/rules.mk
Normal file
1
keyboards/dz60/keymaps/spotpuff/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
BOOTMAGIC_ENABLE = no
|
||||
@ -1,30 +1,8 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F401xC
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F401
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
||||
@ -1,30 +1,8 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F411xE
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F411
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
||||
@ -1,30 +1,8 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F401xC
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F401
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
@ -43,4 +21,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
BACKLIGHT_DRIVER = software
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
|
||||
@ -1,13 +0,0 @@
|
||||
{
|
||||
"keyboard_name": "Katana60",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"key_count": 70,
|
||||
"layout": [{"label":"k40", "x":0, "y":0}, {"label":"k41", "x":1, "y":0}, {"label":"k42", "x":2, "y":0}, {"label":"k43", "x":3, "y":0}, {"label":"k44", "x":4, "y":0}, {"label":"k45", "x":5, "y":0}, {"label":"k46", "x":6, "y":0}, {"label":"k47", "x":7, "y":0}, {"label":"k48", "x":8, "y":0}, {"label":"k49", "x":9, "y":0}, {"label":"k4a", "x":10, "y":0}, {"label":"k4b", "x":11, "y":0}, {"label":"k4c", "x":12, "y":0}, {"label":"k4d", "x":13, "y":0}, {"label":"k4e", "x":14, "y":0}, {"label":"k30", "x":0, "y":1, "w":1.5}, {"label":"k31", "x":1.5, "y":1}, {"label":"k32", "x":2.5, "y":1}, {"label":"k33", "x":3.5, "y":1}, {"label":"k34", "x":4.5, "y":1}, {"label":"k35", "x":5.5, "y":1}, {"label":"k36", "x":6.5, "y":1}, {"label":"k37", "x":7.5, "y":1}, {"label":"k38", "x":8.5, "y":1}, {"label":"k39", "x":9.5, "y":1}, {"label":"k3a", "x":10.5, "y":1}, {"label":"k3b", "x":11.5, "y":1}, {"label":"k3c", "x":12.5, "y":1}, {"label":"k3d", "x":13.5, "y":1, "w":1.5}, {"label":"k20", "x":0, "y":2, "w":1.25}, {"label":"k21", "x":1.25, "y":2}, {"label":"k22", "x":2.25, "y":2}, {"label":"k23", "x":3.25, "y":2}, {"label":"k24", "x":4.25, "y":2}, {"label":"k25", "x":5.25, "y":2}, {"label":"k26", "x":6.25, "y":2}, {"label":"k27", "x":7.75, "y":2}, {"label":"k28", "x":8.75, "y":2}, {"label":"k29", "x":9.75, "y":2}, {"label":"k2a", "x":10.75, "y":2}, {"label":"k2b", "x":11.75, "y":2}, {"label":"k2c", "x":12.75, "y":2}, {"label":"k2d", "x":13.75, "y":2, "w":1.25}, {"label":"k10", "x":0, "y":3}, {"label":"k11", "x":1, "y":3}, {"label":"k12", "x":2, "y":3}, {"label":"k13", "x":3, "y":3}, {"label":"k14", "x":4, "y":3}, {"label":"k15", "x":5, "y":3}, {"label":"k16", "x":6, "y":3}, {"label":"k17", "x":7, "y":3}, {"label":"k18", "x":8, "y":3}, {"label":"k19", "x":9, "y":3}, {"label":"k1a", "x":10, "y":3}, {"label":"k1b", "x":11, "y":3}, {"label":"k1c", "x":12, "y":3}, {"label":"k1d", "x":13, "y":3}, {"label":"k1e", "x":14, "y":3}, {"label":"k00", "x":0, "y":4}, {"label":"k01", "x":1, "y":4, "w":1.25}, {"label":"k02", "x":2.25, "y":4, "w":1.25}, {"label":"k03", "x":3.5, "y":4, "w":1.25}, {"label":"k04", "x":4.75, "y":4, "w":2.25}, {"label":"k05", "x":7, "y":4}, {"label":"k06", "x":8, "y":4, "w":2}, {"label":"k09", "x":10, "y":4}, {"label":"k0a", "x":11, "y":4}, {"label":"k0b", "x":12, "y":4}, {"label":"k0c", "x":13, "y":4}, {"label":"k0d", "x":14, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -1,17 +0,0 @@
|
||||
# Katana60
|
||||
|
||||
|
||||
|
||||
A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
|
||||
|
||||
Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)
|
||||
Hardware Supported: Katana60 PCB v1, Teensy 2.0
|
||||
Hardware Availability: [CandyKeys.com](https://CandyKeys.com)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make katana60:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
|
||||
There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)
|
||||
57
keyboards/majistic/config.h
Normal file
57
keyboards/majistic/config.h
Normal file
@ -0,0 +1,57 @@
|
||||
|
||||
/*
|
||||
Copyright 2020 yossiyossy
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6E55
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER yossiyossy
|
||||
#define PRODUCT maJIStic
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 }
|
||||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, F4, F5 } // F4, F5 is dummy
|
||||
#define MATRIX_ROW_PINS_RIGHT { D4, C6, D7, E6, B4 }
|
||||
#define MATRIX_COL_PINS_RIGHT { B6, B2, B3, B1, F7, F6, F5, F4 }
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
78
keyboards/majistic/info.json
Normal file
78
keyboards/majistic/info.json
Normal file
@ -0,0 +1,78 @@
|
||||
{
|
||||
"keyboard_name": "maJIStic",
|
||||
"url": "https://github.com/yossiyossy/maJIStic",
|
||||
"maintainer": "yossiyossy",
|
||||
"width": 15.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"1", "x":0, "y":0, "w":1.5},
|
||||
{"label":"2", "x":1.5, "y":0},
|
||||
{"label":"3", "x":2.5, "y":0},
|
||||
{"label":"4", "x":3.5, "y":0},
|
||||
{"label":"5", "x":4.5, "y":0},
|
||||
{"label":"6", "x":5.5, "y":0},
|
||||
{"label":"7", "x":7.5, "y":0},
|
||||
{"label":"8", "x":8.5, "y":0},
|
||||
{"label":"9", "x":9.5, "y":0},
|
||||
{"label":"0", "x":10.5, "y":0},
|
||||
{"label":"-", "x":11.5, "y":0},
|
||||
{"label":"^", "x":12.5, "y":0},
|
||||
{"label":"\\", "x":13.5, "y":0},
|
||||
{"label":"BS", "x":14.5, "y":0},
|
||||
{"label":"Tab", "x":0, "y":1},
|
||||
{"label":"Q", "x":1, "y":1},
|
||||
{"label":"W", "x":2, "y":1},
|
||||
{"label":"E", "x":3, "y":1},
|
||||
{"label":"R", "x":4, "y":1},
|
||||
{"label":"T", "x":5, "y":1},
|
||||
{"label":"Y", "x":7, "y":1},
|
||||
{"label":"U", "x":8, "y":1},
|
||||
{"label":"I", "x":9, "y":1},
|
||||
{"label":"O", "x":10, "y":1},
|
||||
{"label":"P", "x":11, "y":1},
|
||||
{"label":"@", "x":12, "y":1},
|
||||
{"label":"[", "x":13, "y":1},
|
||||
{"label":"Caps Lock", "x":0, "y":2, "w":1.25},
|
||||
{"label":"A", "x":1.25, "y":2},
|
||||
{"label":"S", "x":2.25, "y":2},
|
||||
{"label":"D", "x":3.25, "y":2},
|
||||
{"label":"F", "x":4.25, "y":2},
|
||||
{"label":"G", "x":5.25, "y":2},
|
||||
{"label":"H", "x":7.25, "y":2},
|
||||
{"label":"J", "x":8.25, "y":2},
|
||||
{"label":"K", "x":9.25, "y":2},
|
||||
{"label":"L", "x":10.25, "y":2},
|
||||
{"label":";", "x":11.25, "y":2},
|
||||
{"label":":", "x":12.25, "y":2},
|
||||
{"label":"]", "x":13.25, "y":2},
|
||||
{"label":"Enter", "x":14.25, "y":1, "w":1.25, "h":2},
|
||||
{"label":"Shift", "x":0, "y":3, "w":1.75},
|
||||
{"label":"Z", "x":1.75, "y":3},
|
||||
{"label":"X", "x":2.75, "y":3},
|
||||
{"label":"C", "x":3.75, "y":3},
|
||||
{"label":"V", "x":4.75, "y":3},
|
||||
{"label":"B", "x":5.75, "y":3},
|
||||
{"label":"N", "x":7.75, "y":3},
|
||||
{"label":"M", "x":8.75, "y":3},
|
||||
{"label":",", "x":9.75, "y":3},
|
||||
{"label":".", "x":10.75, "y":3},
|
||||
{"label":"/", "x":11.75, "y":3},
|
||||
{"label":"up", "x":12.75, "y":3},
|
||||
{"label":"Shift", "x":13.75, "y":3, "w":1.75},
|
||||
{"label":"Ctrl", "x":0, "y":4},
|
||||
{"label":"Alt", "x":1, "y":4},
|
||||
{"label":"command", "x":2, "y":4, "w":1.25},
|
||||
{"label":"EISU", "x":3.25, "y":4, "w":1.25},
|
||||
{"label":"", "x":4.5, "y":4, "w":1.75},
|
||||
{"label":"", "x":7.25, "y":4, "w":1.5},
|
||||
{"label":"KANA", "x":8.75, "y":4, "w":1.5},
|
||||
{"label":"command", "x":10.25, "y":4, "w":1.5},
|
||||
{"label":"left", "x":11.75, "y":4},
|
||||
{"label":"down", "x":12.75, "y":4},
|
||||
{"label":"right", "x":13.75, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
17
keyboards/majistic/keymaps/default/config.h
Normal file
17
keyboards/majistic/keymaps/default/config.h
Normal file
@ -0,0 +1,17 @@
|
||||
/* Copyright 2020 yossiyossy
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
45
keyboards/majistic/keymaps/default/keymap.c
Normal file
45
keyboards/majistic/keymaps/default/keymap.c
Normal file
@ -0,0 +1,45 @@
|
||||
/* Copyright 2020 yossiyossy
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "keymap_jp.h"
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_LOWER,
|
||||
};
|
||||
|
||||
enum custom_keycodes {
|
||||
L_SPC = SAFE_RANGE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Base */
|
||||
[_BASE] = LAYOUT(
|
||||
JP_1, JP_2, JP_3, JP_4, JP_5, JP_6, JP_7, JP_8, JP_9, JP_0, JP_MINS, JP_CIRC, JP_YEN, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT , \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, JP_COMM, JP_DOT, JP_SLSH, KC_UP, KC_RSFT, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_LANG2, LT(_LOWER, KC_SPC), LT(_LOWER, KC_SPC), KC_LANG1, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT \
|
||||
),
|
||||
[_LOWER] = LAYOUT(
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, \
|
||||
KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, JP_UNDS, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRMU, KC_VOLU, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, KC_BRMD, KC_VOLD, _______ \
|
||||
),
|
||||
};
|
||||
1
keyboards/majistic/keymaps/default/readme.md
Normal file
1
keyboards/majistic/keymaps/default/readme.md
Normal file
@ -0,0 +1 @@
|
||||
# The default keymap for maJIStic
|
||||
17
keyboards/majistic/majistic.c
Normal file
17
keyboards/majistic/majistic.c
Normal file
@ -0,0 +1,17 @@
|
||||
/* Copyright 2020 yossiyossy
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "majistic.h"
|
||||
47
keyboards/majistic/majistic.h
Normal file
47
keyboards/majistic/majistic.h
Normal file
@ -0,0 +1,47 @@
|
||||
/* Copyright 2020 yossiyossy
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT(\
|
||||
l00, l01, l02, l03, l04, l05, r00, r01, r02, r03, r04, r05, r06, r07, \
|
||||
l10, l11, l12, l13, l14, l15, r10, r11, r12, r13, r14, r15, r16, \
|
||||
l20, l21, l22, l23, l24, l25, r20, r21, r22, r23, r24, r25, r26, r17, \
|
||||
l30, l31, l32, l33, l34, l35, r30, r31, r32, r33, r34, r35, r36, \
|
||||
l40, l41, l42, l43, l44, r40, r41, r42, r43, r44, r45 \
|
||||
) {\
|
||||
{ l00, l01, l02, l03, l04, l05, KC_NO, KC_NO }, \
|
||||
{ l10, l11, l12, l13, l14, l15, KC_NO, KC_NO }, \
|
||||
{ l20, l21, l22, l23, l24, l25, KC_NO, KC_NO}, \
|
||||
{ l30, l31, l32, l33, l34, l35, KC_NO, KC_NO}, \
|
||||
{ l40, l41, l42, l43, l44, KC_NO, KC_NO, KC_NO}, \
|
||||
{ r00, r01, r02, r03, r04, r05, r06, r07 }, \
|
||||
{ r10, r11, r12, r13, r14, r15, r16, r17 }, \
|
||||
{ r20, r21, r22, r23, r24, r25, r26, KC_NO }, \
|
||||
{ r30, r31, r32, r33, r34, r35, r36, KC_NO }, \
|
||||
{ r40, r41, r42, r43, r44, r45, KC_NO, KC_NO } \
|
||||
}
|
||||
15
keyboards/majistic/readme.md
Normal file
15
keyboards/majistic/readme.md
Normal file
@ -0,0 +1,15 @@
|
||||
# maJIStic
|
||||
|
||||
|
||||
|
||||
maJIStic is a split, JIS, magic keyboard like, hot-swappable keybaord!
|
||||
|
||||
* Keyboard Maintainer: [yossiyossy](https://github.com/yossiyossy)
|
||||
* Hardware Supported: [pcb](https://github.com/yossiyossy/maJIStic/tree/master/pcb), [case](https://github.com/yossiyossy/maJIStic/tree/master/case/dxf)
|
||||
* Hardware Availability: [booth](https://yossiyossy.booth.pm/items/2325429)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make majistic:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@ -2,19 +2,12 @@
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
@ -23,9 +16,9 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
279
keyboards/masterworks/classy_tkl/info.json
Normal file
279
keyboards/masterworks/classy_tkl/info.json
Normal file
@ -0,0 +1,279 @@
|
||||
{
|
||||
"keyboard_name": "Classy TKL",
|
||||
"url": "https://geekhack.org/index.php?topic=105933",
|
||||
"maintainer": "qmk",
|
||||
"width": 18.25,
|
||||
"height": 6.5,
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{ "label": "Esc", "x": 0, "y": 0 },
|
||||
{ "label": "F1", "x": 2, "y": 0 },
|
||||
{ "label": "F2", "x": 3, "y": 0 },
|
||||
{ "label": "F3", "x": 4, "y": 0 },
|
||||
{ "label": "F4", "x": 5, "y": 0 },
|
||||
{ "label": "F5", "x": 6.5, "y": 0 },
|
||||
{ "label": "F6", "x": 7.5, "y": 0 },
|
||||
{ "label": "F7", "x": 8.5, "y": 0 },
|
||||
{ "label": "F8", "x": 9.5, "y": 0 },
|
||||
{ "label": "F9", "x": 11, "y": 0 },
|
||||
{ "label": "F10", "x": 12, "y": 0 },
|
||||
{ "label": "F11", "x": 13, "y": 0 },
|
||||
{ "label": "F12", "x": 14, "y": 0 },
|
||||
{ "label": "PrtSc", "x": 15.25, "y": 0 },
|
||||
{ "label": "Scroll Lock", "x": 16.25, "y": 0 },
|
||||
{ "label": "Pause", "x": 17.25, "y": 0 },
|
||||
{ "label": "~", "x": 0, "y": 1.5 },
|
||||
{ "label": "!", "x": 1, "y": 1.5 },
|
||||
{ "label": "@", "x": 2, "y": 1.5 },
|
||||
{ "label": "#", "x": 3, "y": 1.5 },
|
||||
{ "label": "$", "x": 4, "y": 1.5 },
|
||||
{ "label": "%", "x": 5, "y": 1.5 },
|
||||
{ "label": "^", "x": 6, "y": 1.5 },
|
||||
{ "label": "&", "x": 7, "y": 1.5 },
|
||||
{ "label": "*", "x": 8, "y": 1.5 },
|
||||
{ "label": "(", "x": 9, "y": 1.5 },
|
||||
{ "label": ")", "x": 10, "y": 1.5 },
|
||||
{ "label": "_", "x": 11, "y": 1.5 },
|
||||
{ "label": "+", "x": 12, "y": 1.5 },
|
||||
{ "label": "Backspace", "x": 13, "y": 1.5 },
|
||||
{ "label": "Backspace2", "x": 14, "y": 1.5 },
|
||||
{ "label": "Insert", "x": 15.25, "y": 1.5 },
|
||||
{ "label": "Home", "x": 16.25, "y": 1.5 },
|
||||
{ "label": "PgUp", "x": 17.25, "y": 1.5 },
|
||||
{ "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 },
|
||||
{ "label": "Q", "x": 1.5, "y": 2.5 },
|
||||
{ "label": "W", "x": 2.5, "y": 2.5 },
|
||||
{ "label": "E", "x": 3.5, "y": 2.5 },
|
||||
{ "label": "R", "x": 4.5, "y": 2.5 },
|
||||
{ "label": "T", "x": 5.5, "y": 2.5 },
|
||||
{ "label": "Y", "x": 6.5, "y": 2.5 },
|
||||
{ "label": "U", "x": 7.5, "y": 2.5 },
|
||||
{ "label": "I", "x": 8.5, "y": 2.5 },
|
||||
{ "label": "O", "x": 9.5, "y": 2.5 },
|
||||
{ "label": "P", "x": 10.5, "y": 2.5 },
|
||||
{ "label": "{", "x": 11.5, "y": 2.5 },
|
||||
{ "label": "}", "x": 12.5, "y": 2.5 },
|
||||
{ "label": "|", "x": 13.5, "y": 2.5, "w": 1.5 },
|
||||
{ "label": "Delete", "x": 15.25, "y": 2.5 },
|
||||
{ "label": "End", "x": 16.25, "y": 2.5 },
|
||||
{ "label": "PgDn", "x": 17.25, "y": 2.5 },
|
||||
{ "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 },
|
||||
{ "label": "A", "x": 1.75, "y": 3.5 },
|
||||
{ "label": "S", "x": 2.75, "y": 3.5 },
|
||||
{ "label": "D", "x": 3.75, "y": 3.5 },
|
||||
{ "label": "F", "x": 4.75, "y": 3.5 },
|
||||
{ "label": "G", "x": 5.75, "y": 3.5 },
|
||||
{ "label": "H", "x": 6.75, "y": 3.5 },
|
||||
{ "label": "J", "x": 7.75, "y": 3.5 },
|
||||
{ "label": "K", "x": 8.75, "y": 3.5 },
|
||||
{ "label": "L", "x": 9.75, "y": 3.5 },
|
||||
{ "label": ":", "x": 10.75, "y": 3.5 },
|
||||
{ "label": "\"", "x": 11.75, "y": 3.5 },
|
||||
{ "label": "Enter", "x": 12.75, "y": 3.5, "w": 2.25 },
|
||||
{ "label": "Shift", "x": 0, "y": 4.5, "w": 1.25 },
|
||||
{ "label": "|", "x": 1.25, "y": 4.5 },
|
||||
{ "label": "Z", "x": 2.25, "y": 4.5 },
|
||||
{ "label": "X", "x": 3.25, "y": 4.5 },
|
||||
{ "label": "C", "x": 4.25, "y": 4.5 },
|
||||
{ "label": "V", "x": 5.25, "y": 4.5 },
|
||||
{ "label": "B", "x": 6.25, "y": 4.5 },
|
||||
{ "label": "N", "x": 7.25, "y": 4.5 },
|
||||
{ "label": "M", "x": 8.25, "y": 4.5 },
|
||||
{ "label": "<", "x": 9.25, "y": 4.5 },
|
||||
{ "label": ">", "x": 10.25, "y": 4.5 },
|
||||
{ "label": "?", "x": 11.25, "y": 4.5 },
|
||||
{ "label": "Shift", "x": 12.25, "y": 4.5, "w": 1.75 },
|
||||
{ "label": "Shift2", "x": 14, "y": 4.5, "w": 1 },
|
||||
{ "label": "Up", "x": 16.25, "y": 4.5 },
|
||||
{ "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Win", "x": 1.5, "y": 5.5, "w": 1 },
|
||||
{ "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Space", "x": 4, "y": 5.5, "w": 7 },
|
||||
{ "label": "Alt", "x": 11, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Win", "x": 12.5, "y": 5.5, "w": 1 },
|
||||
{ "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Left", "x": 15.25, "y": 5.5 },
|
||||
{ "label": "Down", "x": 16.25, "y": 5.5 },
|
||||
{ "label": "Right", "x": 17.25, "y": 5.5 }
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_ansi_wkl": {
|
||||
"layout": [
|
||||
{ "label": "Esc", "x": 0, "y": 0 },
|
||||
{ "label": "F1", "x": 2, "y": 0 },
|
||||
{ "label": "F2", "x": 3, "y": 0 },
|
||||
{ "label": "F3", "x": 4, "y": 0 },
|
||||
{ "label": "F4", "x": 5, "y": 0 },
|
||||
{ "label": "F5", "x": 6.5, "y": 0 },
|
||||
{ "label": "F6", "x": 7.5, "y": 0 },
|
||||
{ "label": "F7", "x": 8.5, "y": 0 },
|
||||
{ "label": "F8", "x": 9.5, "y": 0 },
|
||||
{ "label": "F9", "x": 11, "y": 0 },
|
||||
{ "label": "F10", "x": 12, "y": 0 },
|
||||
{ "label": "F11", "x": 13, "y": 0 },
|
||||
{ "label": "F12", "x": 14, "y": 0 },
|
||||
{ "label": "PrtSc", "x": 15.25, "y": 0 },
|
||||
{ "label": "Scroll Lock", "x": 16.25, "y": 0 },
|
||||
{ "label": "Pause", "x": 17.25, "y": 0 },
|
||||
{ "label": "~", "x": 0, "y": 1.5 },
|
||||
{ "label": "!", "x": 1, "y": 1.5 },
|
||||
{ "label": "@", "x": 2, "y": 1.5 },
|
||||
{ "label": "#", "x": 3, "y": 1.5 },
|
||||
{ "label": "$", "x": 4, "y": 1.5 },
|
||||
{ "label": "%", "x": 5, "y": 1.5 },
|
||||
{ "label": "^", "x": 6, "y": 1.5 },
|
||||
{ "label": "&", "x": 7, "y": 1.5 },
|
||||
{ "label": "*", "x": 8, "y": 1.5 },
|
||||
{ "label": "(", "x": 9, "y": 1.5 },
|
||||
{ "label": ")", "x": 10, "y": 1.5 },
|
||||
{ "label": "_", "x": 11, "y": 1.5 },
|
||||
{ "label": "+", "x": 12, "y": 1.5 },
|
||||
{ "label": "Backspace", "x": 13, "y": 1.5, "w": 2 },
|
||||
{ "label": "Insert", "x": 15.25, "y": 1.5 },
|
||||
{ "label": "Home", "x": 16.25, "y": 1.5 },
|
||||
{ "label": "PgUp", "x": 17.25, "y": 1.5 },
|
||||
{ "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 },
|
||||
{ "label": "Q", "x": 1.5, "y": 2.5 },
|
||||
{ "label": "W", "x": 2.5, "y": 2.5 },
|
||||
{ "label": "E", "x": 3.5, "y": 2.5 },
|
||||
{ "label": "R", "x": 4.5, "y": 2.5 },
|
||||
{ "label": "T", "x": 5.5, "y": 2.5 },
|
||||
{ "label": "Y", "x": 6.5, "y": 2.5 },
|
||||
{ "label": "U", "x": 7.5, "y": 2.5 },
|
||||
{ "label": "I", "x": 8.5, "y": 2.5 },
|
||||
{ "label": "O", "x": 9.5, "y": 2.5 },
|
||||
{ "label": "P", "x": 10.5, "y": 2.5 },
|
||||
{ "label": "{", "x": 11.5, "y": 2.5 },
|
||||
{ "label": "}", "x": 12.5, "y": 2.5 },
|
||||
{ "label": "|", "x": 13.5, "y": 2.5, "w": 1.5 },
|
||||
{ "label": "Delete", "x": 15.25, "y": 2.5 },
|
||||
{ "label": "End", "x": 16.25, "y": 2.5 },
|
||||
{ "label": "PgDn", "x": 17.25, "y": 2.5 },
|
||||
{ "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 },
|
||||
{ "label": "A", "x": 1.75, "y": 3.5 },
|
||||
{ "label": "S", "x": 2.75, "y": 3.5 },
|
||||
{ "label": "D", "x": 3.75, "y": 3.5 },
|
||||
{ "label": "F", "x": 4.75, "y": 3.5 },
|
||||
{ "label": "G", "x": 5.75, "y": 3.5 },
|
||||
{ "label": "H", "x": 6.75, "y": 3.5 },
|
||||
{ "label": "J", "x": 7.75, "y": 3.5 },
|
||||
{ "label": "K", "x": 8.75, "y": 3.5 },
|
||||
{ "label": "L", "x": 9.75, "y": 3.5 },
|
||||
{ "label": ":", "x": 10.75, "y": 3.5 },
|
||||
{ "label": "\"", "x": 11.75, "y": 3.5 },
|
||||
{ "label": "Enter", "x": 12.75, "y": 3.5, "w": 2.25 },
|
||||
{ "label": "Shift", "x": 0, "y": 4.5, "w": 2.25 },
|
||||
{ "label": "Z", "x": 2.25, "y": 4.5 },
|
||||
{ "label": "X", "x": 3.25, "y": 4.5 },
|
||||
{ "label": "C", "x": 4.25, "y": 4.5 },
|
||||
{ "label": "V", "x": 5.25, "y": 4.5 },
|
||||
{ "label": "B", "x": 6.25, "y": 4.5 },
|
||||
{ "label": "N", "x": 7.25, "y": 4.5 },
|
||||
{ "label": "M", "x": 8.25, "y": 4.5 },
|
||||
{ "label": "<", "x": 9.25, "y": 4.5 },
|
||||
{ "label": ">", "x": 10.25, "y": 4.5 },
|
||||
{ "label": "?", "x": 11.25, "y": 4.5 },
|
||||
{ "label": "Shift", "x": 12.25, "y": 4.5, "w": 2.75 },
|
||||
{ "label": "Up", "x": 16.25, "y": 4.5 },
|
||||
{ "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Space", "x": 4, "y": 5.5, "w": 7 },
|
||||
{ "label": "Alt", "x": 11, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Left", "x": 15.25, "y": 5.5 },
|
||||
{ "label": "Down", "x": 16.25, "y": 5.5 },
|
||||
{ "label": "Right", "x": 17.25, "y": 5.5 }
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_iso_wkl": {
|
||||
"layout": [
|
||||
{ "label": "Esc", "x": 0, "y": 0 },
|
||||
{ "label": "F1", "x": 2, "y": 0 },
|
||||
{ "label": "F2", "x": 3, "y": 0 },
|
||||
{ "label": "F3", "x": 4, "y": 0 },
|
||||
{ "label": "F4", "x": 5, "y": 0 },
|
||||
{ "label": "F5", "x": 6.5, "y": 0 },
|
||||
{ "label": "F6", "x": 7.5, "y": 0 },
|
||||
{ "label": "F7", "x": 8.5, "y": 0 },
|
||||
{ "label": "F8", "x": 9.5, "y": 0 },
|
||||
{ "label": "F9", "x": 11, "y": 0 },
|
||||
{ "label": "F10", "x": 12, "y": 0 },
|
||||
{ "label": "F11", "x": 13, "y": 0 },
|
||||
{ "label": "F12", "x": 14, "y": 0 },
|
||||
{ "label": "PrtSc", "x": 15.25, "y": 0 },
|
||||
{ "label": "Scroll Lock", "x": 16.25, "y": 0 },
|
||||
{ "label": "Pause", "x": 17.25, "y": 0 },
|
||||
{ "label": "\u00ac", "x": 0, "y": 1.5 },
|
||||
{ "label": "!", "x": 1, "y": 1.5 },
|
||||
{ "label": "\"", "x": 2, "y": 1.5 },
|
||||
{ "label": "\u00a3", "x": 3, "y": 1.5 },
|
||||
{ "label": "$", "x": 4, "y": 1.5 },
|
||||
{ "label": "%", "x": 5, "y": 1.5 },
|
||||
{ "label": "^", "x": 6, "y": 1.5 },
|
||||
{ "label": "&", "x": 7, "y": 1.5 },
|
||||
{ "label": "*", "x": 8, "y": 1.5 },
|
||||
{ "label": "(", "x": 9, "y": 1.5 },
|
||||
{ "label": ")", "x": 10, "y": 1.5 },
|
||||
{ "label": "_", "x": 11, "y": 1.5 },
|
||||
{ "label": "+", "x": 12, "y": 1.5 },
|
||||
{ "label": "Backspace", "x": 13, "y": 1.5, "w": 2 },
|
||||
{ "label": "Insert", "x": 15.25, "y": 1.5 },
|
||||
{ "label": "Home", "x": 16.25, "y": 1.5 },
|
||||
{ "label": "PgUp", "x": 17.25, "y": 1.5 },
|
||||
{ "label": "Tab", "x": 0, "y": 2.5, "w": 1.5 },
|
||||
{ "label": "Q", "x": 1.5, "y": 2.5 },
|
||||
{ "label": "W", "x": 2.5, "y": 2.5 },
|
||||
{ "label": "E", "x": 3.5, "y": 2.5 },
|
||||
{ "label": "R", "x": 4.5, "y": 2.5 },
|
||||
{ "label": "T", "x": 5.5, "y": 2.5 },
|
||||
{ "label": "Y", "x": 6.5, "y": 2.5 },
|
||||
{ "label": "U", "x": 7.5, "y": 2.5 },
|
||||
{ "label": "I", "x": 8.5, "y": 2.5 },
|
||||
{ "label": "O", "x": 9.5, "y": 2.5 },
|
||||
{ "label": "P", "x": 10.5, "y": 2.5 },
|
||||
{ "label": "{", "x": 11.5, "y": 2.5 },
|
||||
{ "label": "}", "x": 12.5, "y": 2.5 },
|
||||
{ "label": "Delete", "x": 15.25, "y": 2.5 },
|
||||
{ "label": "End", "x": 16.25, "y": 2.5 },
|
||||
{ "label": "PgDn", "x": 17.25, "y": 2.5 },
|
||||
{ "label": "Caps Lock", "x": 0, "y": 3.5, "w": 1.75 },
|
||||
{ "label": "A", "x": 1.75, "y": 3.5 },
|
||||
{ "label": "S", "x": 2.75, "y": 3.5 },
|
||||
{ "label": "D", "x": 3.75, "y": 3.5 },
|
||||
{ "label": "F", "x": 4.75, "y": 3.5 },
|
||||
{ "label": "G", "x": 5.75, "y": 3.5 },
|
||||
{ "label": "H", "x": 6.75, "y": 3.5 },
|
||||
{ "label": "J", "x": 7.75, "y": 3.5 },
|
||||
{ "label": "K", "x": 8.75, "y": 3.5 },
|
||||
{ "label": "L", "x": 9.75, "y": 3.5 },
|
||||
{ "label": ":", "x": 10.75, "y": 3.5 },
|
||||
{ "label": "@", "x": 11.75, "y": 3.5 },
|
||||
{ "label": "~", "x": 12.75, "y": 3.5 },
|
||||
{ "label": "Enter", "x": 13.75, "y": 2.5, "w": 1.25, "h": 2 },
|
||||
{ "label": "Shift", "x": 0, "y": 4.5, "w": 1.25 },
|
||||
{ "label": "|", "x": 1.25, "y": 4.5 },
|
||||
{ "label": "Z", "x": 2.25, "y": 4.5 },
|
||||
{ "label": "X", "x": 3.25, "y": 4.5 },
|
||||
{ "label": "C", "x": 4.25, "y": 4.5 },
|
||||
{ "label": "V", "x": 5.25, "y": 4.5 },
|
||||
{ "label": "B", "x": 6.25, "y": 4.5 },
|
||||
{ "label": "N", "x": 7.25, "y": 4.5 },
|
||||
{ "label": "M", "x": 8.25, "y": 4.5 },
|
||||
{ "label": "<", "x": 9.25, "y": 4.5 },
|
||||
{ "label": ">", "x": 10.25, "y": 4.5 },
|
||||
{ "label": "?", "x": 11.25, "y": 4.5 },
|
||||
{ "label": "Shift", "x": 12.25, "y": 4.5, "w": 2.75 },
|
||||
{ "label": "Up", "x": 16.25, "y": 4.5 },
|
||||
{ "label": "Ctrl", "x": 0, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Alt", "x": 2.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Space", "x": 4, "y": 5.5, "w": 7 },
|
||||
{ "label": "AltGr", "x": 11, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Ctrl", "x": 13.5, "y": 5.5, "w": 1.5 },
|
||||
{ "label": "Left", "x": 15.25, "y": 5.5 },
|
||||
{ "label": "Down", "x": 16.25, "y": 5.5 },
|
||||
{ "label": "Right", "x": 17.25, "y": 5.5 }
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
19
keyboards/masterworks/classy_tkl/keymaps/default/config.h
Normal file
19
keyboards/masterworks/classy_tkl/keymaps/default/config.h
Normal file
@ -0,0 +1,19 @@
|
||||
/* Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
29
keyboards/masterworks/classy_tkl/keymaps/default/keymap.c
Normal file
29
keyboards/masterworks/classy_tkl/keymaps/default/keymap.c
Normal file
@ -0,0 +1,29 @@
|
||||
/*
|
||||
Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// clang-format off
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP,
|
||||
KC_LCTL, KC_NO, KC_LALT, KC_SPC, KC_RALT, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
|
||||
};
|
||||
// clang-format on
|
||||
@ -0,0 +1 @@
|
||||
# The default winkeyless ANSI keymap for the Classy TKL
|
||||
@ -0,0 +1,19 @@
|
||||
/* Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
@ -0,0 +1,29 @@
|
||||
/*
|
||||
Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// clang-format off
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_tkl_ansi_wkl(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
|
||||
};
|
||||
// clang-format on
|
||||
@ -0,0 +1 @@
|
||||
# The default winkeyless ANSI keymap for the Classy TKL
|
||||
@ -0,0 +1,19 @@
|
||||
/* Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
@ -0,0 +1,29 @@
|
||||
/*
|
||||
Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// clang-format off
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_tkl_iso_wkl(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL , KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
|
||||
KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)
|
||||
};
|
||||
// clang-format on
|
||||
@ -0,0 +1 @@
|
||||
# The default winkeyless ISO keymap for the Classy TKL
|
||||
50
keyboards/masterworks/classy_tkl/keymaps/via/keymap.c
Normal file
50
keyboards/masterworks/classy_tkl/keymaps/via/keymap.c
Normal file
@ -0,0 +1,50 @@
|
||||
/*
|
||||
Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// clang-format off
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS , KC_HOME, KC_PGUP,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL , KC_END, KC_PGDN,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_NO, KC_UP,
|
||||
KC_LCTL, KC_NO, KC_LALT, KC_SPC, KC_RALT, KC_NO, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
[1] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
[3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
// clang-format on
|
||||
1
keyboards/masterworks/classy_tkl/keymaps/via/rules.mk
Normal file
1
keyboards/masterworks/classy_tkl/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
15
keyboards/masterworks/classy_tkl/readme.md
Normal file
15
keyboards/masterworks/classy_tkl/readme.md
Normal file
@ -0,0 +1,15 @@
|
||||
# Classy TKL
|
||||
|
||||
|
||||
|
||||
A short description of the keyboard/project
|
||||
|
||||
* Keyboard Maintainer: [Mathias Andersson](https://github.com/wraul)
|
||||
* Hardware Supported: [Classy TKL PCB](https://github.com/4pplet/classyTKL)
|
||||
* Hardware Availability: https://geekhack.org/index.php?topic=105933
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make masterworks/classy_tkl:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
58
keyboards/masterworks/classy_tkl/rev_a/config.h
Normal file
58
keyboards/masterworks/classy_tkl/rev_a/config.h
Normal file
@ -0,0 +1,58 @@
|
||||
/*
|
||||
Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4D57 // "MW" = Masterworks
|
||||
#define PRODUCT_ID 0x0001
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Masterworks
|
||||
#define PRODUCT Classy TKL
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 17
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS \
|
||||
{ C7, F0, F1, F4, F5, F6 }
|
||||
#define MATRIX_COL_PINS \
|
||||
{ B4, D7, D6, D4, C6, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0, E6, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
@ -1,4 +1,4 @@
|
||||
/* Copyright 2017 Baris Tosun
|
||||
/* Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
@ -13,31 +13,30 @@
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "katana60.h"
|
||||
#include "rev_a.h"
|
||||
|
||||
#define CAPS_PIN B5
|
||||
#define SCROLL_PIN B6
|
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
setPinOutput(CAPS_PIN);
|
||||
setPinOutput(SCROLL_PIN);
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
bool led_update_kb(led_t led_state) {
|
||||
bool res = led_update_user(led_state);
|
||||
if(res) {
|
||||
writePin(CAPS_PIN, led_state.caps_lock);
|
||||
writePin(SCROLL_PIN, led_state.scroll_lock);
|
||||
}
|
||||
return res;
|
||||
}
|
||||
79
keyboards/masterworks/classy_tkl/rev_a/rev_a.h
Normal file
79
keyboards/masterworks/classy_tkl/rev_a/rev_a.h
Normal file
@ -0,0 +1,79 @@
|
||||
/* Copyright 2020 Mathias Andersson <wraul@dbox.se>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
// clang-format off
|
||||
#define LAYOUT_all( \
|
||||
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k3D, k1E, k1F, k1G, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4F, \
|
||||
k50, k52, k53, k57, k5B, k5C, k5D, k5E, k5F, k5G \
|
||||
) \
|
||||
{ \
|
||||
{ k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, KC_NO, k4F, KC_NO }, \
|
||||
{ k50, KC_NO, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, k5F, k5G }, \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_ansi_wkl( \
|
||||
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k3D, k1E, k1F, k1G, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \
|
||||
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4F, \
|
||||
k50, k53, k57, k5B, k5D, k5E, k5F, k5G \
|
||||
) \
|
||||
{ \
|
||||
{ k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, KC_NO, k1E, k1F, k1G }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, KC_NO, k4F, KC_NO }, \
|
||||
{ k50, KC_NO, KC_NO, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, KC_NO, k5D, k5E, k5F, k5G }, \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_iso_wkl( \
|
||||
k00, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k3D, k1E, k1F, k1G, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2E, k2F, k2G, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k2D, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4F, \
|
||||
k50, k53, k57, k5B, k5D, k5E, k5F, k5G \
|
||||
) \
|
||||
{ \
|
||||
{ k00, KC_NO, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, KC_NO, k1E, k1F, k1G }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO, KC_NO, KC_NO }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, KC_NO, k4F, KC_NO }, \
|
||||
{ k50, KC_NO, KC_NO, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, KC_NO, k5D, k5E, k5F, k5G }, \
|
||||
}
|
||||
// clang-format on
|
||||
26
keyboards/masterworks/classy_tkl/rev_a/rules.mk
Normal file
26
keyboards/masterworks/classy_tkl/rev_a/rules.mk
Normal file
@ -0,0 +1,26 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
|
||||
# Supported layouts
|
||||
LAYOUTS = tkl_ansi_wkl tkl_iso_wkl
|
||||
@ -1,38 +1,15 @@
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = m20add_boot
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = m20add_bd
|
||||
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
USE_FPU = yes
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
OPT_DEFS =
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
#DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
@ -1426,6 +1426,9 @@
|
||||
"y": 4
|
||||
}
|
||||
]
|
||||
},
|
||||
"LAYOUT_65_iso_blocker": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
59
keyboards/matrix/noah/keymaps/rys/keymap.c
Normal file
59
keyboards/matrix/noah/keymaps/rys/keymap.c
Normal file
@ -0,0 +1,59 @@
|
||||
/* Copyright 2020 Rys Sommefeldt
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program i s distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_65_iso_blocker(
|
||||
/*
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ ` │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ │Del│
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ Ent├───┤
|
||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ │PUp│
|
||||
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
|
||||
* │Shft│ \ │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │PDn│
|
||||
* ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
|
||||
* │LCtl│LGUI│LAlt│ Spaaaaaaace │RAlt│ L1 │ │ ← │ ↓ │ → │
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
|
||||
*/
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_65_iso_blocker(
|
||||
/*
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │RST│ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│ │ │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │ TOG │PLN│MOD│HU+│HU-│SA+│SA-│VA+│VA-│ │ │ │ │ │ │
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤
|
||||
* │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
|
||||
* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
|
||||
* │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
|
||||
* ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
|
||||
* │ │ │ │ │ │ │ │ │ │ │
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
|
||||
*/
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
|
||||
RGB_TOG, RGB_M_P, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
};
|
||||
@ -48,6 +48,20 @@
|
||||
{k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_iso_blocker( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48 \
|
||||
) { \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,KC_NO, k0e}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,KC_NO, KC_NO}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
|
||||
{k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
|
||||
#define LAYOUT_default_splitspace( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
|
||||
@ -1,38 +1,15 @@
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = noah_boot
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = noah_bd
|
||||
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
USE_FPU = yes
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
OPT_DEFS =
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
#DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
@ -52,3 +29,5 @@ RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
CUSTOM_MATRIX = yes
|
||||
# project specific files
|
||||
SRC += ws2812.c matrix.c
|
||||
|
||||
LAYOUTS = 65_iso_blocker
|
||||
|
||||
@ -1,3 +1,9 @@
|
||||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
@ -17,32 +23,4 @@ SPLIT_KEYBOARD = yes
|
||||
SERIAL_DRIVER = usart
|
||||
KEYBOARD_SHARED_EP = yes
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F401xC
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F401
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
|
||||
OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE
|
||||
|
||||
714
keyboards/primekb/meridian/chconf.h
Normal file
714
keyboards/primekb/meridian/chconf.h
Normal file
@ -0,0 +1,714 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file rt/templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_0_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_RESOLUTION)
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_FREQUENCY)
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time intervals data size.
|
||||
* @note Allowed values are 16, 32 or 64 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_INTERVALS_SIZE)
|
||||
#define CH_CFG_INTERVALS_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time types data size.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_TYPES_SIZE)
|
||||
#define CH_CFG_TIME_TYPES_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_TIMEDELTA)
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_QUANTUM)
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#if !defined(CH_CFG_NO_IDLE_THREAD)
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_OPTIMIZE_SPEED)
|
||||
#define CH_CFG_OPTIMIZE_SPEED FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_TM)
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_REGISTRY)
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_WAITEXIT)
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES)
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES)
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS)
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS)
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES)
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MAILBOXES)
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMCORE)
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_HEAP)
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMPOOLS)
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Objects FIFOs APIs.
|
||||
* @details If enabled then the objects FIFOs APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_OBJ_FIFOS)
|
||||
#define CH_CFG_USE_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Pipes APIs.
|
||||
* @details If enabled then the pipes APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_PIPES)
|
||||
#define CH_CFG_USE_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Objects factory options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Objects Factory APIs.
|
||||
* @details If enabled then the objects factory APIs are included in the
|
||||
* kernel.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_FACTORY)
|
||||
#define CH_CFG_USE_FACTORY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Maximum length for object names.
|
||||
* @details If the specified length is zero then the name is stored by
|
||||
* pointer but this could have unintended side effects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
|
||||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the registry of generic objects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for generic buffers.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for semaphores.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
|
||||
#define CH_CFG_FACTORY_SEMAPHORES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for mailboxes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAILBOXES)
|
||||
#define CH_CFG_FACTORY_MAILBOXES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for objects FIFOs.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for Pipes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
|
||||
#define CH_CFG_FACTORY_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_STATISTICS)
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_CHECKS)
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_ASSERTS)
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_MASK)
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_FILL_THREADS)
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#if !defined(CH_DBG_THREADS_PROFILING)
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System structure extension.
|
||||
* @details User fields added to the end of the @p ch_system_t structure.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief System initialization hook.
|
||||
* @details User initialization code added to the @p chSysInit() function
|
||||
* just before interrupts are enabled globally.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_INIT_HOOK() { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p _thread_init() function.
|
||||
*
|
||||
* @note It is invoked from within @p _thread_init() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
46
keyboards/primekb/meridian/config.h
Normal file
46
keyboards/primekb/meridian/config.h
Normal file
@ -0,0 +1,46 @@
|
||||
/*
|
||||
Copyright 2020 Holten Campbell
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5052
|
||||
#define PRODUCT_ID 0x004D
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Prime Keyboards
|
||||
#define PRODUCT Meridian
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, B9, B8, B7, B6, B5, B4, B3, A15 }
|
||||
#define MATRIX_ROW_PINS { A6, A5, A4, A3, A2 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN B15
|
||||
#define RGBLED_NUM 3
|
||||
#define WS2812_SPI SPID2
|
||||
#define WS2812_SPI_MOSI_PAL_MODE 0
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
525
keyboards/primekb/meridian/halconf.h
Normal file
525
keyboards/primekb/meridian/halconf.h
Normal file
@ -0,0 +1,525 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#define _CHIBIOS_HAL_CONF_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_0_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the cryptographic subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SIO subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SIO FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the TRNG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_TRNG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WSPI FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* PAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
|
||||
*/
|
||||
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define CAN_ENFORCE_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CRY driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the SW fall-back of the cryptographic driver.
|
||||
* @details When enabled, this option, activates a fall-back software
|
||||
* implementation for algorithms not supported by the underlying
|
||||
* hardware.
|
||||
* @note Fall-back implementations may not be present for all algorithms.
|
||||
*/
|
||||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_USE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Makes the driver forcibly use the fall-back implementations.
|
||||
*/
|
||||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_ENFORCE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* DAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the zero-copy API.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR_V20 0x50FF8000U
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for non-V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR 0x80100000U
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables circular transfers APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_CIRCULAR FALSE
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Handling method for SPI CS line.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
|
||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* WSPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
||||
15
keyboards/primekb/meridian/info.json
Normal file
15
keyboards/primekb/meridian/info.json
Normal file
@ -0,0 +1,15 @@
|
||||
{
|
||||
"keyboard_name": "Meridian",
|
||||
"url": "https://www.primekb.com",
|
||||
"maintainer": "holtenc",
|
||||
"width": 16.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_unified_bs_rshift": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Backspace", "x":14.5, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}]
|
||||
},
|
||||
"LAYOUT_split_bs_rshift": {
|
||||
"layout":[{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":8.5, "y":0}, {"label":"*", "x":9.5, "y":0}, {"label":"(", "x":10.5, "y":0}, {"label":")", "x":11.5, "y":0}, {"label":"_", "x":12.5, "y":0}, {"label":"+", "x":13.5, "y":0}, {"label":"Del", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":8, "y":1}, {"label":"U", "x":9, "y":1}, {"label":"I", "x":10, "y":1}, {"label":"O", "x":11, "y":1}, {"label":"P", "x":12, "y":1}, {"label":"{", "x":13, "y":1}, {"label":"}", "x":14, "y":1}, {"label":"|", "x":15, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":8.25, "y":2}, {"label":"J", "x":9.25, "y":2}, {"label":"K", "x":10.25, "y":2}, {"label":"L", "x":11.25, "y":2}, {"label":":", "x":12.25, "y":2}, {"label":"\"", "x":13.25, "y":2}, {"label":"Enter", "x":14.25, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":"<", "x":10.75, "y":3}, {"label":">", "x":11.75, "y":3}, {"label":"?", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":1.75}, {"label":"Fn", "x":15.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":2.25}, {"x":7.75, "y":4, "w":2.75}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":12.75, "y":4, "w":1.25}, {"label":"Menu", "x":14, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.25, "y":4, "w":1.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
35
keyboards/primekb/meridian/keymaps/default/keymap.c
Normal file
35
keyboards/primekb/meridian/keymaps/default/keymap.c
Normal file
@ -0,0 +1,35 @@
|
||||
/*
|
||||
Copyright 2020 Holten Campbell
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_split_bs_rshift(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[1] = LAYOUT_split_bs_rshift(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC,
|
||||
_______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,
|
||||
_______, KC_HOME, KC_PGDN, KC_END, _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
49
keyboards/primekb/meridian/keymaps/via/keymap.c
Normal file
49
keyboards/primekb/meridian/keymaps/via/keymap.c
Normal file
@ -0,0 +1,49 @@
|
||||
/*
|
||||
Copyright 2020 Holten Campbell
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_split_bs_rshift(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[1] = LAYOUT_split_bs_rshift(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC,
|
||||
_______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,
|
||||
_______, KC_HOME, KC_PGDN, KC_END, _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[2] = LAYOUT_split_bs_rshift(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT_split_bs_rshift(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
1
keyboards/primekb/meridian/keymaps/via/rules.mk
Normal file
1
keyboards/primekb/meridian/keymaps/via/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
VIA_ENABLE = yes
|
||||
176
keyboards/primekb/meridian/mcuconf.h
Normal file
176
keyboards/primekb/meridian/mcuconf.h
Normal file
@ -0,0 +1,176 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
68
keyboards/primekb/meridian/meridian.c
Normal file
68
keyboards/primekb/meridian/meridian.c
Normal file
@ -0,0 +1,68 @@
|
||||
/*
|
||||
Copyright 2020 Holten Campbell
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "meridian.h"
|
||||
|
||||
//Initialize B12 for in-switch caps lock
|
||||
void keyboard_pre_init_kb(void){
|
||||
setPinOutput(B12);
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
//Initialize all RGB indicators to 'off'
|
||||
__attribute__((weak))
|
||||
void keyboard_post_init_user(void) {
|
||||
rgblight_setrgb_at(0, 0, 0, 0); // [..., 0] = top LED
|
||||
rgblight_setrgb_at(0, 0, 0, 1); // [..., 1] = middle LED
|
||||
rgblight_setrgb_at(0, 0, 0, 2); // [..., 2] = bottom LED
|
||||
}
|
||||
|
||||
//Indicator light function
|
||||
bool led_update_kb(led_t led_state) {
|
||||
bool res = led_update_user(led_state);
|
||||
if (res) {
|
||||
// writePin(B12, !led_state.caps_lock); //Un-comment this line to enable in-switch capslock indicator
|
||||
if (led_state.caps_lock) {
|
||||
rgblight_setrgb_at(0, 255, 0, 0); //green
|
||||
} else {
|
||||
rgblight_setrgb_at(0, 0, 0, 0);
|
||||
}
|
||||
if (led_state.num_lock) {
|
||||
rgblight_setrgb_at(0, 0, 255, 1); //blue
|
||||
} else {
|
||||
rgblight_setrgb_at(0, 0, 0, 1);
|
||||
}
|
||||
if (led_state.scroll_lock) {
|
||||
rgblight_setrgb_at(255, 0, 0, 2); //red
|
||||
} else {
|
||||
rgblight_setrgb_at(0, 0, 0, 2);
|
||||
}
|
||||
}
|
||||
return res;
|
||||
}
|
||||
|
||||
//Below is an exmaple of layer indication using one of the RGB indicatiors. As configured, uses the bottom indicator (2) to light up red when layer 1 is in use.
|
||||
/*
|
||||
layer_state_t layer_state_set_kb(layer_state_t state) {
|
||||
if (get_highest_layer(state) == 1) {
|
||||
rgblight_setrgb_at(255, 0, 0, 2);
|
||||
} else {
|
||||
rgblight_setrgb_at(0, 0, 0, 2);
|
||||
}
|
||||
return state;
|
||||
}
|
||||
*/
|
||||
52
keyboards/primekb/meridian/meridian.h
Normal file
52
keyboards/primekb/meridian/meridian.h
Normal file
@ -0,0 +1,52 @@
|
||||
/*
|
||||
Copyright 2020 Holten Campbell
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define K_NO KC_NO
|
||||
|
||||
#define LAYOUT_unified_bs_rshift( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
|
||||
K400, K401, K402, K404, K407, K409, K411, K412, K413 \
|
||||
) \
|
||||
{ \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K_NO, K213 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K_NO}, \
|
||||
{ K400, K401, K402, K_NO, K404, K_NO, K_NO, K407, K_NO, K409, K_NO, K411, K412, K413 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_split_bs_rshift( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
|
||||
K400, K401, K402, K404, K407, K409, K411, K412, K413 \
|
||||
) \
|
||||
{ \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
|
||||
{ K400, K401, K402, K_NO, K404, K_NO, K_NO, K407, K_NO, K409, K_NO, K411, K412, K413 } \
|
||||
}
|
||||
12
keyboards/primekb/meridian/readme.md
Normal file
12
keyboards/primekb/meridian/readme.md
Normal file
@ -0,0 +1,12 @@
|
||||
# ai03 x PrimeKB Meridian
|
||||
|
||||
|
||||
|
||||
* Keyboard Maintainer: [Holten Campbell](https://github.com/holtenc)
|
||||
* Hardware Supported: STM32F072CBT6
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make primekb/meridian:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
23
keyboards/primekb/meridian/rules.mk
Normal file
23
keyboards/primekb/meridian/rules.mk
Normal file
@ -0,0 +1,23 @@
|
||||
# MCU name
|
||||
MCU = STM32F072
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
WS2812_DRIVER = spi
|
||||
|
||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||
@ -15,18 +15,16 @@ You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define VENDOR_ID 0x7272 // "rr" - rominronin
|
||||
#define PRODUCT_ID 0x0C2C
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER RominRonin CandyKeys
|
||||
#define PRODUCT Katana60
|
||||
#define DESCRIPTION QMK keyboard firmware for Katana60
|
||||
#define PRODUCT Katana60 rev1
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
@ -49,18 +47,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
@ -92,56 +84,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
@ -159,28 +103,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
#endif
|
||||
83
keyboards/rominronin/katana60/rev1/info.json
Normal file
83
keyboards/rominronin/katana60/rev1/info.json
Normal file
@ -0,0 +1,83 @@
|
||||
{
|
||||
"keyboard_name": "Katana60 rev1",
|
||||
"url": "",
|
||||
"maintainer": "rominronin",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"k40", "x":0, "y":0},
|
||||
{"label":"k41", "x":1, "y":0},
|
||||
{"label":"k42", "x":2, "y":0},
|
||||
{"label":"k43", "x":3, "y":0},
|
||||
{"label":"k44", "x":4, "y":0},
|
||||
{"label":"k45", "x":5, "y":0},
|
||||
{"label":"k46", "x":6, "y":0},
|
||||
{"label":"k47", "x":7, "y":0},
|
||||
{"label":"k48", "x":8, "y":0},
|
||||
{"label":"k49", "x":9, "y":0},
|
||||
{"label":"k4a", "x":10, "y":0},
|
||||
{"label":"k4b", "x":11, "y":0},
|
||||
{"label":"k4c", "x":12, "y":0},
|
||||
{"label":"k4d", "x":13, "y":0},
|
||||
{"label":"k4e", "x":14, "y":0},
|
||||
{"label":"k30", "x":0, "y":1, "w":1.5},
|
||||
{"label":"k31", "x":1.5, "y":1},
|
||||
{"label":"k32", "x":2.5, "y":1},
|
||||
{"label":"k33", "x":3.5, "y":1},
|
||||
{"label":"k34", "x":4.5, "y":1},
|
||||
{"label":"k35", "x":5.5, "y":1},
|
||||
{"label":"k36", "x":6.5, "y":1},
|
||||
{"label":"k37", "x":7.5, "y":1},
|
||||
{"label":"k38", "x":8.5, "y":1},
|
||||
{"label":"k39", "x":9.5, "y":1},
|
||||
{"label":"k3a", "x":10.5, "y":1},
|
||||
{"label":"k3b", "x":11.5, "y":1},
|
||||
{"label":"k3c", "x":12.5, "y":1},
|
||||
{"label":"k3d", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"k20", "x":0, "y":2, "w":1.25},
|
||||
{"label":"k21", "x":1.25, "y":2},
|
||||
{"label":"k22", "x":2.25, "y":2},
|
||||
{"label":"k23", "x":3.25, "y":2},
|
||||
{"label":"k24", "x":4.25, "y":2},
|
||||
{"label":"k25", "x":5.25, "y":2},
|
||||
{"label":"k26", "x":6.25, "y":2},
|
||||
{"label":"k27", "x":7.75, "y":2},
|
||||
{"label":"k28", "x":8.75, "y":2},
|
||||
{"label":"k29", "x":9.75, "y":2},
|
||||
{"label":"k2a", "x":10.75, "y":2},
|
||||
{"label":"k2b", "x":11.75, "y":2},
|
||||
{"label":"k2c", "x":12.75, "y":2},
|
||||
{"label":"k2d", "x":13.75, "y":2, "w":1.25},
|
||||
{"label":"k10", "x":0, "y":3},
|
||||
{"label":"k11", "x":1, "y":3},
|
||||
{"label":"k12", "x":2, "y":3},
|
||||
{"label":"k13", "x":3, "y":3},
|
||||
{"label":"k14", "x":4, "y":3},
|
||||
{"label":"k15", "x":5, "y":3},
|
||||
{"label":"k16", "x":6, "y":3},
|
||||
{"label":"k17", "x":7, "y":3},
|
||||
{"label":"k18", "x":8, "y":3},
|
||||
{"label":"k19", "x":9, "y":3},
|
||||
{"label":"k1a", "x":10, "y":3},
|
||||
{"label":"k1b", "x":11, "y":3},
|
||||
{"label":"k1c", "x":12, "y":3},
|
||||
{"label":"k1d", "x":13, "y":3},
|
||||
{"label":"k1e", "x":14, "y":3},
|
||||
{"label":"k00", "x":0, "y":4},
|
||||
{"label":"k01", "x":1, "y":4, "w":1.25},
|
||||
{"label":"k02", "x":2.25, "y":4, "w":1.25},
|
||||
{"label":"k03", "x":3.5, "y":4, "w":1.25},
|
||||
{"label":"k04", "x":4.75, "y":4, "w":2.25},
|
||||
{"label":"k05", "x":7, "y":4},
|
||||
{"label":"k06", "x":8, "y":4, "w":2},
|
||||
{"label":"k09", "x":10, "y":4},
|
||||
{"label":"k0a", "x":11, "y":4},
|
||||
{"label":"k0b", "x":12, "y":4},
|
||||
{"label":"k0c", "x":13, "y":4},
|
||||
{"label":"k0d", "x":14, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -34,7 +34,7 @@
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = LAYOUT( /* Base */
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS,
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC,
|
||||
MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_HOME, KC_PGUP, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
@ -34,7 +34,7 @@
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = LAYOUT( /* Base */
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_PLUS,
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC,
|
||||
MO(3), KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
@ -64,6 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
};
|
||||
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
17
keyboards/rominronin/katana60/rev1/readme.md
Normal file
17
keyboards/rominronin/katana60/rev1/readme.md
Normal file
@ -0,0 +1,17 @@
|
||||
# Katana60 rev1
|
||||
|
||||
|
||||
|
||||
A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
|
||||
|
||||
Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)
|
||||
Hardware Supported: Katana60 PCB rev1
|
||||
Hardware Availability: the rev1 is no longer available, the rev2 can be found at [candykeys.com](https://candykeys.com/product/katana60-pcb-V2)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make rominronin/katana60/rev1:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)
|
||||
16
keyboards/rominronin/katana60/rev1/rev1.c
Normal file
16
keyboards/rominronin/katana60/rev1/rev1.c
Normal file
@ -0,0 +1,16 @@
|
||||
/* Copyright 2017 Baris Tosun
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "rev1.h"
|
||||
@ -13,8 +13,7 @@
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef KATANA60_H
|
||||
#define KATANA60_H
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
@ -36,5 +35,3 @@
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
22
keyboards/rominronin/katana60/rev1/rules.mk
Normal file
22
keyboards/rominronin/katana60/rev1/rules.mk
Normal file
@ -0,0 +1,22 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
105
keyboards/rominronin/katana60/rev2/config.h
Normal file
105
keyboards/rominronin/katana60/rev2/config.h
Normal file
@ -0,0 +1,105 @@
|
||||
/*
|
||||
Copyright 2019 rominronin
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x7272 // "rr" - rominronin
|
||||
#define PRODUCT_ID 0xF03B
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER RominRonin CandyKeys
|
||||
#define PRODUCT Katana60 rev2
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B0, E6, D5, B4, B5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, D6, D4, D3, D2, D1, D0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
579
keyboards/rominronin/katana60/rev2/info.json
Normal file
579
keyboards/rominronin/katana60/rev2/info.json
Normal file
@ -0,0 +1,579 @@
|
||||
{
|
||||
"keyboard_name": "Katana60 rev2",
|
||||
"url": "https://candykeys.com/product/katana60-pcb-V2",
|
||||
"maintainer": "rominronin",
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_7u_a": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k41","x":0,"y":4,"w":1.5},
|
||||
{"label":"k42","x":1.5,"y":4},
|
||||
{"label":"k43","x":2.5,"y":4,"w":1.5},
|
||||
{"label":"k47","x":4,"y":4,"w":7},
|
||||
{"label":"k4b","x":11,"y":4},
|
||||
{"label":"k4c","x":12,"y":4},
|
||||
{"label":"k4d","x":13,"y":4},
|
||||
{"label":"k4e","x":14,"y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_7u_b": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k41","x":0,"y":4,"w":1.5},
|
||||
{"label":"k42","x":1.5,"y":4},
|
||||
{"label":"k43","x":2.5,"y":4,"w":1.5},
|
||||
{"label":"k47","x":4,"y":4,"w":7},
|
||||
{"label":"k17","x":11,"y":4,"w":1.5},
|
||||
{"label":"k27","x":12.5,"y":4},
|
||||
{"label":"k48","x":13.5,"y":4,"w":1.5}
|
||||
]
|
||||
},
|
||||
"LAYOUT_1_a": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k40","x":0,"y":4},
|
||||
{"label":"k41","x":1,"y":4,"w":1.25},
|
||||
{"label":"k42","x":2.25,"y":4,"w":1.25},
|
||||
{"label":"k43","x":3.5,"y":4,"w":1.25},
|
||||
{"label":"k44","x":4.75,"y":4,"w":2.25},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2},
|
||||
{"label":"k4a","x":10,"y":4},
|
||||
{"label":"k4b","x":11,"y":4},
|
||||
{"label":"k4c","x":12,"y":4},
|
||||
{"label":"k4d","x":13,"y":4},
|
||||
{"label":"k4e","x":14,"y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_1_b": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k40","x":0,"y":4},
|
||||
{"label":"k41","x":1,"y":4,"w":1.25},
|
||||
{"label":"k42","x":2.25,"y":4,"w":1.25},
|
||||
{"label":"k43","x":3.5,"y":4,"w":1.25},
|
||||
{"label":"k44","x":4.75,"y":4,"w":2.25},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2.75},
|
||||
{"label":"k17","x":10.75,"y":4,"w":2},
|
||||
{"label":"k48","x":12.75,"y":4,"w":2.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_1_c": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k40","x":0,"y":4},
|
||||
{"label":"k41","x":1,"y":4,"w":1.25},
|
||||
{"label":"k42","x":2.25,"y":4,"w":1.25},
|
||||
{"label":"k43","x":3.5,"y":4,"w":1.25},
|
||||
{"label":"k44","x":4.75,"y":4,"w":2.25},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2},
|
||||
{"label":"k45","x":10,"y":4,"w":1.5},
|
||||
{"label":"k27","x":11.5,"y":4,"w":1.25},
|
||||
{"label":"k48","x":12.75,"y":4,"w":2.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_2_a": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k41","x":0,"y":4,"w":1.5},
|
||||
{"label":"k42","x":1.5,"y":4,"w":1.25},
|
||||
{"label":"k43","x":2.75,"y":4,"w":1.5},
|
||||
{"label":"k44","x":4.25,"y":4,"w":2.75},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2},
|
||||
{"label":"k4a","x":10,"y":4},
|
||||
{"label":"k4b","x":11,"y":4},
|
||||
{"label":"k4c","x":12,"y":4},
|
||||
{"label":"k4d","x":13,"y":4},
|
||||
{"label":"k4e","x":14,"y":4}
|
||||
]
|
||||
},
|
||||
"LAYOUT_2_b": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k41","x":0,"y":4,"w":1.5},
|
||||
{"label":"k42","x":1.5,"y":4,"w":1.25},
|
||||
{"label":"k43","x":2.75,"y":4,"w":1.5},
|
||||
{"label":"k44","x":4.25,"y":4,"w":2.75},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2.75},
|
||||
{"label":"k17","x":10.75,"y":4,"w":2},
|
||||
{"label":"k48","x":12.75,"y":4,"w":2.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_2_c": {
|
||||
"layout": [
|
||||
{"label":"k00","x":0,"y":0},
|
||||
{"label":"k01","x":1,"y":0},
|
||||
{"label":"k02","x":2,"y":0},
|
||||
{"label":"k03","x":3,"y":0},
|
||||
{"label":"k04","x":4,"y":0},
|
||||
{"label":"k05","x":5,"y":0},
|
||||
{"label":"k06","x":6,"y":0},
|
||||
{"label":"k07","x":7,"y":0},
|
||||
{"label":"k08","x":8,"y":0},
|
||||
{"label":"k09","x":9,"y":0},
|
||||
{"label":"k0a","x":10,"y":0},
|
||||
{"label":"k0b","x":11,"y":0},
|
||||
{"label":"k0c","x":12,"y":0},
|
||||
{"label":"k0d","x":13,"y":0},
|
||||
{"label":"k0e","x":14,"y":0},
|
||||
{"label":"k10","x":0,"y":1,"w":1.5},
|
||||
{"label":"k11","x":1.5,"y":1},
|
||||
{"label":"k12","x":2.5,"y":1},
|
||||
{"label":"k13","x":3.5,"y":1},
|
||||
{"label":"k14","x":4.5,"y":1},
|
||||
{"label":"k15","x":5.5,"y":1},
|
||||
{"label":"k16","x":6.5,"y":1},
|
||||
{"label":"k18","x":7.5,"y":1},
|
||||
{"label":"k19","x":8.5,"y":1},
|
||||
{"label":"k1a","x":9.5,"y":1},
|
||||
{"label":"k1b","x":10.5,"y":1},
|
||||
{"label":"k1c","x":11.5,"y":1},
|
||||
{"label":"k1d","x":12.5,"y":1},
|
||||
{"label":"k1e","x":13.5,"y":1,"w":1.5},
|
||||
{"label":"k20","x":0,"y":2,"w":1.25},
|
||||
{"label":"k21","x":1.25,"y":2},
|
||||
{"label":"k22","x":2.25,"y":2},
|
||||
{"label":"k23","x":3.25,"y":2},
|
||||
{"label":"k24","x":4.25,"y":2},
|
||||
{"label":"k25","x":5.25,"y":2},
|
||||
{"label":"k26","x":6.25,"y":2},
|
||||
{"label":"k28","x":7.75,"y":2},
|
||||
{"label":"k29","x":8.75,"y":2},
|
||||
{"label":"k2a","x":9.75,"y":2},
|
||||
{"label":"k2b","x":10.75,"y":2},
|
||||
{"label":"k2c","x":11.75,"y":2},
|
||||
{"label":"k2d","x":12.75,"y":2},
|
||||
{"label":"k2e","x":13.75,"y":2,"w":1.25},
|
||||
{"label":"k30","x":0,"y":3},
|
||||
{"label":"k31","x":1,"y":3},
|
||||
{"label":"k32","x":2,"y":3},
|
||||
{"label":"k33","x":3,"y":3},
|
||||
{"label":"k34","x":4,"y":3},
|
||||
{"label":"k35","x":5,"y":3},
|
||||
{"label":"k36","x":6,"y":3},
|
||||
{"label":"k37","x":7,"y":3},
|
||||
{"label":"k38","x":8,"y":3},
|
||||
{"label":"k39","x":9,"y":3},
|
||||
{"label":"k3a","x":10,"y":3},
|
||||
{"label":"k3b","x":11,"y":3},
|
||||
{"label":"k3c","x":12,"y":3},
|
||||
{"label":"k3d","x":13,"y":3},
|
||||
{"label":"k3e","x":14,"y":3},
|
||||
{"label":"k41","x":0,"y":4,"w":1.5},
|
||||
{"label":"k42","x":1.5,"y":4,"w":1.25},
|
||||
{"label":"k43","x":2.75,"y":4,"w":1.5},
|
||||
{"label":"k44","x":4.25,"y":4,"w":2.75},
|
||||
{"label":"k47","x":7,"y":4},
|
||||
{"label":"k49","x":8,"y":4,"w":2},
|
||||
{"label":"k45","x":10,"y":4,"w":1.5},
|
||||
{"label":"k27","x":11.5,"y":4,"w":1.25},
|
||||
{"label":"k48","x":12.75,"y":4,"w":2.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
19
keyboards/rominronin/katana60/rev2/keymaps/default/config.h
Normal file
19
keyboards/rominronin/katana60/rev2/keymaps/default/config.h
Normal file
@ -0,0 +1,19 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
71
keyboards/rominronin/katana60/rev2/keymaps/default/keymap.c
Normal file
71
keyboards/rominronin/katana60/rev2/keymaps/default/keymap.c
Normal file
@ -0,0 +1,71 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// MacOS based definitions.
|
||||
#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
|
||||
#define K_PRVWD LALT(KC_LEFT) // Previous word
|
||||
#define K_NXTWD LALT(KC_RIGHT) // Next word
|
||||
#define K_LSTRT LGUI(KC_LEFT) // Start of line
|
||||
#define K_LEND LGUI(KC_RIGHT) // End of line
|
||||
#define UNDO LGUI(KC_Z) // UNDO
|
||||
#define CUT LGUI(KC_X) // CUT
|
||||
#define COPY LGUI(KC_C) // COPY
|
||||
#define PASTE LGUI(KC_V) // PASTE
|
||||
|
||||
enum layer_names {
|
||||
BASE,
|
||||
NUMB,
|
||||
SYMB,
|
||||
CURS,
|
||||
};
|
||||
|
||||
// Defines the keycodes used by our macros in process_record_user
|
||||
enum custom_keycodes {
|
||||
QMKBEST = SAFE_RANGE,
|
||||
QMKURL
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = LAYOUT_1_a(/* Base */
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(1), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, KC_DEL, KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
MO(2), KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_ENT, K_SPCFN, KC_RGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
|
||||
),
|
||||
[NUMB] = LAYOUT_1_a(
|
||||
_______, _______, _______, _______, _______, _______, _______, DF(0), _______, _______, KC_PEQL, KC_PSLS, KC_PAST, _______, _______,
|
||||
_______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______,
|
||||
_______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______,
|
||||
_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______,
|
||||
_______, _______, _______, _______, _______, KC_P0, _______, _______, KC_PDOT, KC_PENT, _______, _______
|
||||
),
|
||||
[SYMB] = LAYOUT_1_a(
|
||||
RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
|
||||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
|
||||
_______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_DEL, _______, _______, _______, _______, _______
|
||||
),
|
||||
[CURS] = LAYOUT_1_a(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______,
|
||||
_______, _______, KC_LCTL, KC_LALT, KC_LSFT, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______,
|
||||
_______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
@ -0,0 +1 @@
|
||||
# The default keymap for katana60_rev2
|
||||
@ -0,0 +1,19 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
@ -0,0 +1,79 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// MacOS based definitions.
|
||||
#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
|
||||
#define K_PRVWD LALT(KC_LEFT) // Previous word
|
||||
#define K_NXTWD LALT(KC_RIGHT) // Next word
|
||||
#define K_LSTRT LGUI(KC_LEFT) // Start of line
|
||||
#define K_LEND LGUI(KC_RIGHT) // End of line
|
||||
#define UNDO LGUI(KC_Z) // UNDO
|
||||
#define CUT LGUI(KC_X) // CUT
|
||||
#define COPY LGUI(KC_C) // COPY
|
||||
#define PASTE LGUI(KC_V) // PASTE
|
||||
|
||||
enum layer_names {
|
||||
BASE,
|
||||
NUMB,
|
||||
SYMB,
|
||||
CURS,
|
||||
BASE2,
|
||||
};
|
||||
|
||||
// Defines the keycodes used by our macros in process_record_user
|
||||
enum custom_keycodes {
|
||||
QMKBEST = SAFE_RANGE,
|
||||
QMKURL
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[BASE] = LAYOUT_7u_a(/* Base */
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(4), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC,
|
||||
MO(3), KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LALT, KC_LGUI, K_SPCFN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
|
||||
),
|
||||
[NUMB] = LAYOUT_7u_a(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PEQL, KC_PSLS, KC_PAST, _______, _______,
|
||||
_______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______,
|
||||
DF(0), KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______,
|
||||
_______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______,
|
||||
_______, _______, _______, KC_P0, KC_PDOT, KC_PENT, _______, _______
|
||||
),
|
||||
[SYMB] = LAYOUT_7u_a(
|
||||
RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
|
||||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_VOLD, KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
|
||||
_______, KC_PLUS, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
|
||||
_______, _______, _______, KC_DEL, _______, _______, _______, _______
|
||||
),
|
||||
[CURS] = LAYOUT_7u_a(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, K_PRVWD, KC_UP, K_NXTWD, _______, _______,
|
||||
_______, _______, KC_LCTL, KC_LALT, KC_LSFT, _______, _______, _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, _______,
|
||||
_______, UNDO, CUT, COPY, PASTE, _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND, _______, _______,
|
||||
_______, _______, _______, DF(1), _______, _______, _______, _______
|
||||
),
|
||||
[BASE2] = LAYOUT_7u_a(/* Base */
|
||||
KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, DF(0), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, KC_BSPC,
|
||||
KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_HOME, KC_PGUP, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_END, KC_DEL, KC_PGDN, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPACE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT
|
||||
)
|
||||
};
|
||||
@ -0,0 +1 @@
|
||||
# The default keymap for katana60_rev2
|
||||
17
keyboards/rominronin/katana60/rev2/readme.md
Normal file
17
keyboards/rominronin/katana60/rev2/readme.md
Normal file
@ -0,0 +1,17 @@
|
||||
# Katana60 rev2
|
||||
|
||||
|
||||
|
||||
A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
|
||||
|
||||
Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)
|
||||
Hardware Supported: Katana60 PCB rev2
|
||||
Hardware Availability: [candykeys.com](https://candykeys.com/product/katana60-pcb-V2)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make rominronin/katana60/rev2:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)
|
||||
16
keyboards/rominronin/katana60/rev2/rev2.c
Normal file
16
keyboards/rominronin/katana60/rev2/rev2.c
Normal file
@ -0,0 +1,16 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "rev2.h"
|
||||
238
keyboards/rominronin/katana60/rev2/rev2.h
Normal file
238
keyboards/rominronin/katana60/rev2/rev2.h
Normal file
@ -0,0 +1,238 @@
|
||||
/* Copyright 2019 rominronin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#define XXX KC_NO
|
||||
|
||||
/* LAYOUT_7u_a
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┴─┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┼───┼───┼───┤
|
||||
* │41 │42 │43 │ 47 │4B │4C │4D │4E │
|
||||
* └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘
|
||||
*/
|
||||
#define LAYOUT_7u_a( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q41, Q42, Q43, Q47, Q4B, Q4C, Q4D, Q4E \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ XXX, Q41, Q42, Q43, XXX, XXX, XXX, Q47, XXX, XXX, XXX, Q4B, Q4C, Q4D, Q4E } \
|
||||
}
|
||||
|
||||
/* LAYOUT_7u_b
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┴─┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┴─┬─┴─┬─┴───┤
|
||||
* │41 │42 │43 │ 47 │17 │27 │48 │
|
||||
* └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
|
||||
*/
|
||||
#define LAYOUT_7u_b( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q41, Q42, Q43, Q47, Q17, Q27, Q48 \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ XXX, Q41, Q42, Q43, XXX, XXX, XXX, Q47, Q48, XXX, XXX, XXX, XXX, XXX, XXX } \
|
||||
}
|
||||
|
||||
/* LAYOUT_1_a
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┼───┼───┼───┼───┤
|
||||
* │40 │41 │42 │43 │ 44 │47 │ 49 │4A │4B │4C │4D │4E │
|
||||
* └───┴────┴────┴────┴────────┴───┴───────┴───┴───┴───┴───┴───┘
|
||||
*/
|
||||
#define LAYOUT_1_a( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q4A, Q4B, Q4C, Q4D, Q4E \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ Q40, Q41, Q42, Q43, Q44, XXX, XXX, Q47, XXX, Q49, Q4A, Q4B, Q4C, Q4D, Q4E } \
|
||||
}
|
||||
|
||||
/* LAYOUT_1_b
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┴──┬┴───┴──┬┴───┴───┤
|
||||
* │40 │41 │42 │43 │ 44 │47 │ 49 │17 │48 │
|
||||
* └───┴────┴────┴────┴────────┴───┴──────────┴───────┴────────┘
|
||||
*/
|
||||
#define LAYOUT_1_b( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q17, Q48 \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ Q40, Q41, Q42, Q43, Q44, XXX, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \
|
||||
}
|
||||
|
||||
/* LAYOUT_1_c
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┴─┬─┴──┬┴───┴───┤
|
||||
* │40 │41 │42 │43 │ 44 │47 │ 49 │45 │27 │48 │
|
||||
* └───┴────┴────┴────┴────────┴───┴───────┴─────┴────┴────────┘
|
||||
*/
|
||||
#define LAYOUT_1_c( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q40, Q41, Q42, Q43, Q44, Q47, Q49, Q45, Q27, Q48 \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ Q40, Q41, Q42, Q43, Q44, Q45, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \
|
||||
}
|
||||
|
||||
|
||||
/* LAYOUT_2_a
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┴─┬─┴──┬┴───┴┬──┴───┴───┼───┼───┴───┼───┼───┼───┼───┼───┤
|
||||
* │41 │42 │43 │ 44 │47 │ 49 │4A │4B │4C │4D │4E │
|
||||
* └─────┴────┴─────┴──────────┴───┴───────┴───┴───┴───┴───┴───┘
|
||||
*/
|
||||
#define LAYOUT_2_a( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q41, Q42, Q43, Q44, Q47, Q49, Q4A, Q4B, Q4C, Q4D, Q4E \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ XXX, Q41, Q42, Q43, Q44, XXX, XXX, Q47, XXX, Q49, Q4A, Q4B, Q4C, Q4D, Q4E } \
|
||||
}
|
||||
|
||||
|
||||
|
||||
/* LAYOUT_2_b
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┴─┬─┴──┬┴───┴┬──┴───┴───┼───┼───┴───┴──┬┴───┴──┬┴───┴───┤
|
||||
* │41 │42 │43 │ 44 │47 │ 49 │17 │48 │
|
||||
* └─────┴────┴─────┴──────────┴───┴──────────┴───────┴────────┘
|
||||
*/
|
||||
#define LAYOUT_2_b( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q41, Q42, Q43, Q44, Q47, Q49, Q17, Q48 \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, XXX, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ XXX, Q41, Q42, Q43, Q44, XXX, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \
|
||||
}
|
||||
|
||||
/* LAYOUT_2_c
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||
* │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
|
||||
* │10 │11 │12 │13 │14 │15 │16 │18 │19 │1A │1B │1C │1D │1E │
|
||||
* ├────┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤
|
||||
* │20 │21 │22 │23 │24 │25 │26 │ │28 │29 │2A │2B │2C │2D │2E │
|
||||
* ├───┬┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬┴─┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───┤
|
||||
* │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │
|
||||
* ├───┼───┴┬──┴─┬─┴──┬┴───┴───┼───┼───┴───┼───┴─┬─┴──┬┴───┴───┤
|
||||
* │40 │41 │42 │43 │ 44 │47 │ 49 │45 │27 │48 │
|
||||
* └───┴────┴────┴────┴────────┴───┴───────┴─────┴────┴────────┘
|
||||
*/
|
||||
#define LAYOUT_2_c( \
|
||||
Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E, \
|
||||
Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E, \
|
||||
Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E, \
|
||||
Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E, \
|
||||
Q41, Q42, Q43, Q44, Q47, Q49, Q45, Q27, Q48 \
|
||||
) { \
|
||||
{ Q00, Q01, Q02, Q03, Q04, Q05, Q06, Q07, Q08, Q09, Q0A, Q0B, Q0C, Q0D, Q0E }, \
|
||||
{ Q10, Q11, Q12, Q13, Q14, Q15, Q16, XXX, Q18, Q19, Q1A, Q1B, Q1C, Q1D, Q1E }, \
|
||||
{ Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q2A, Q2B, Q2C, Q2D, Q2E }, \
|
||||
{ Q30, Q31, Q32, Q33, Q34, Q35, Q36, Q37, Q38, Q39, Q3A, Q3B, Q3C, Q3D, Q3E }, \
|
||||
{ XXX, Q41, Q42, Q43, Q44, Q45, XXX, Q47, Q48, Q49, XXX, XXX, XXX, XXX, XXX } \
|
||||
}
|
||||
22
keyboards/rominronin/katana60/rev2/rules.mk
Normal file
22
keyboards/rominronin/katana60/rev2/rules.mk
Normal file
@ -0,0 +1,22 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
@ -1,27 +1,5 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F411xE
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F411
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
@ -1,27 +1,5 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F401xC
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F401
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
@ -1,27 +1,5 @@
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F411xE
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = BLACKPILL_STM32_F411
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
USE_FPU = yes
|
||||
# Address of the booloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p df11
|
||||
# Address of the bootloader in system memory
|
||||
STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
|
||||
|
||||
@ -9,7 +9,7 @@ QMK_FIRMWARE = Path.cwd()
|
||||
MAX_KEYBOARD_SUBFOLDERS = 5
|
||||
|
||||
# Supported processor types
|
||||
ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303'
|
||||
ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
|
||||
AVR_PROCESSORS = 'at90usb1286', 'at90usb646', 'atmega16u2', 'atmega328p', 'atmega32a', 'atmega32u2', 'atmega32u4', None
|
||||
ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS
|
||||
VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85'
|
||||
|
||||
@ -82,37 +82,37 @@ ifneq ($(findstring MK20DX256, $(MCU)),)
|
||||
BOARD ?= PJRC_TEENSY_3_1
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F303, $(MCU)),)
|
||||
ifneq ($(findstring STM32F042, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
MCU = cortex-m0
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
ARMV = 6
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F3xx
|
||||
MCU_SERIES = STM32F0xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32F303xC
|
||||
MCU_LDSCRIPT ?= STM32F042x6
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32f3xx
|
||||
MCU_STARTUP ?= stm32f0xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= GENERIC_STM32_F303XC
|
||||
BOARD ?= GENERIC_STM32_F042X6
|
||||
|
||||
USE_FPU ?= yes
|
||||
USE_FPU ?= no
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p df11
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F072, $(MCU)),)
|
||||
@ -144,41 +144,8 @@ ifneq ($(findstring STM32F072, $(MCU)),)
|
||||
USE_FPU ?= no
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p df11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F042, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m0
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32F042x6
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32f0xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= GENERIC_STM32_F042X6
|
||||
|
||||
USE_FPU ?= no
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p df11
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F103, $(MCU)),)
|
||||
@ -210,8 +177,107 @@ ifneq ($(findstring STM32F103, $(MCU)),)
|
||||
USE_FPU ?= no
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p df11
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F303, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F3xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32F303xC
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32f3xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= GENERIC_STM32_F303XC
|
||||
|
||||
USE_FPU ?= yes
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F401, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32F401xC
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32f4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= BLACKPILL_STM32_F401
|
||||
|
||||
USE_FPU ?= yes
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32F411, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32F411xE
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32f4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= BLACKPILL_STM32_F411
|
||||
|
||||
USE_FPU ?= yes
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286))
|
||||
|
||||
@ -161,6 +161,8 @@ ifeq ($(strip $(LTO_ENABLE)), yes)
|
||||
EXTRAFLAGS += -flto
|
||||
TMK_COMMON_DEFS += -DLTO_ENABLE
|
||||
TMK_COMMON_DEFS += -DLINK_TIME_OPTIMIZATON_ENABLE
|
||||
else ifdef LINK_TIME_OPTIMIZATION_ENABLE
|
||||
$(error The LINK_TIME_OPTIMIZATION_ENABLE flag has been renamed to LTO_ENABLE.)
|
||||
endif
|
||||
|
||||
# Search Path
|
||||
|
||||
1
users/spotpuff/rules.mk
Normal file
1
users/spotpuff/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
BOOTMAGIC_ENABLE = no
|
||||
Loading…
Reference in New Issue
Block a user