diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index 19ebb05a1cb..63651f98b25 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c index 752c32009a5..c14bd267766 100644 --- a/Bootloaders/DFU/BootloaderDFU.c +++ b/Bootloaders/DFU/BootloaderDFU.c @@ -635,7 +635,7 @@ static void ProcessWriteCommand(void) WaitForExit = true; /* Check if empty request data array - an empty request after a filled request retains the - previous valid request data, but initializes the reset */ + previous valid request data, but initialises the reset */ if (!(SentCommand.DataSize)) { if (SentCommand.Data[1] == 0x00) // Start via watchdog diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index 3e1e13c5aff..2a67bd562b5 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -71,7 +71,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index 0833bbd3802..0033e6a0f63 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 8aa94ddffa1..f92c91ac240 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -63,7 +63,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 5452a07fb9d..84b400c4742 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -73,7 +73,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index e466c0d1707..022ce5b5ac2 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -57,7 +57,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 1e885830f74..5967fc6f6c8 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index 1d92d6345c5..a26636a6501 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index dc94b5b8dfe..6f24efe530a 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -65,7 +65,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index 1d9fd209fef..56aeec419f0 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -62,7 +62,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index 8fb927af31a..53825734791 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -74,7 +74,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 524d69fefd8..f2fffc1fcd9 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -74,7 +74,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 8ebb119b5f9..04df35c6e4c 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c index e0c581f5993..5889c45b3f6 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c @@ -156,7 +156,7 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) } } -/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are +/** Initialises the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are * processed. */ void TCP_Init(void) diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c index e01a04fb4b6..4fab86cfb64 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c @@ -74,7 +74,7 @@ char PROGMEM HTTPPage[] = ""; -/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application +/** Initialises the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application * callback routine for packets sent to the HTTP protocol port. */ void Webserver_Init(void) diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index 02874f57207..f1e6eaa0c71 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -75,7 +75,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index ad86cbb02b0..bb856ebb342 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index 9d24d7b4b15..96fc6734b2e 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -64,7 +64,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index f03a7229ffd..149f8360a4e 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index 8aa94ddffa1..f92c91ac240 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -63,7 +63,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt index 5452a07fb9d..84b400c4742 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt @@ -73,7 +73,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index e466c0d1707..022ce5b5ac2 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -57,7 +57,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/Joystick/Joystick.txt b/Demos/Device/LowLevel/Joystick/Joystick.txt index 1e885830f74..5967fc6f6c8 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.txt +++ b/Demos/Device/LowLevel/Joystick/Joystick.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/Demos/Device/LowLevel/Keyboard/Keyboard.txt index 7ac8f652610..a65baaa643e 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.txt +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index ae0ee30b6d5..03d6799f52b 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -197,7 +197,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard * LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT * endpoint, the processing code is placed here to avoid duplicating it and potentially having different - * behavior depending on the method used to sent it. + * behaviour depending on the method used to sent it. */ void Keyboard_ProcessLEDReport(const uint8_t LEDStatus) { diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt index dc94b5b8dfe..6f24efe530a 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt @@ -65,7 +65,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/MIDI/MIDI.txt b/Demos/Device/LowLevel/MIDI/MIDI.txt index 1d9fd209fef..56aeec419f0 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.txt +++ b/Demos/Device/LowLevel/MIDI/MIDI.txt @@ -62,7 +62,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 7c54c3b9f2f..3489ca033ec 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -74,7 +74,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt index 86c149f2baf..faa4a4b296c 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.txt +++ b/Demos/Device/LowLevel/Mouse/Mouse.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h index 17a34ace7fc..285883bae29 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h @@ -61,7 +61,7 @@ /** Enum for the possible NDIS adapter states. */ enum RNDIS_States_t { - RNDIS_Uninitialized = 0, /**< Adapter currently uninitialized */ + RNDIS_Uninitialized = 0, /**< Adapter currently uninitialised */ RNDIS_Initialized = 1, /**< Adapter currently initialized but not ready for data transfers */ RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers */ }; diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c index f75b828bc3c..a159f35d15d 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c @@ -153,7 +153,7 @@ void TCP_Task(void) } } -/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are +/** Initialises the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are * processed. */ void TCP_Init(void) diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c index 807c1a2e31f..bc42ef39533 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c @@ -74,7 +74,7 @@ char PROGMEM HTTPPage[] = ""; -/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application +/** Initialises the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application * callback routine for packets sent to the HTTP protocol port. */ void Webserver_Init(void) diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index 02874f57207..f1e6eaa0c71 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -75,7 +75,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt index ad86cbb02b0..bb856ebb342 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt index d289208634a..cf3b0a43413 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt @@ -67,7 +67,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt index 967c6b42835..4601390f636 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt index 7ea48654d5e..220d37f4509 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt index 38f48aed01f..ffd194a6f94 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt index 50c147ba4c4..269bf5b5bbd 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt @@ -47,7 +47,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt index 168205811f3..871aa811188 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt @@ -55,7 +55,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.txt b/Demos/Host/ClassDriver/MouseHost/MouseHost.txt index 4c0674b2689..6926e99b30b 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.txt +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt index 8e7fc9cdcc5..3d88fe36922 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt index 02f2ac6d035..84ab828baf5 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt @@ -53,7 +53,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt index 829464f91bd..42601957848 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt @@ -50,7 +50,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt index b44543c6672..1ccf87ab84a 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt @@ -52,7 +52,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt index 7c4617f0e0c..3a7742248d5 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt @@ -53,7 +53,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c index 543e1b879ff..8e51279d36e 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c @@ -56,7 +56,7 @@ void Bluetooth_StackInitialized(void) Bluetooth_State.LocalBDADDR[5], Bluetooth_State.LocalBDADDR[4], Bluetooth_State.LocalBDADDR[3], Bluetooth_State.LocalBDADDR[2], Bluetooth_State.LocalBDADDR[1], Bluetooth_State.LocalBDADDR[0]); - /* Reinitialize the services placed on top of the Bluetooth stack ready for new connections */ + /* Reinitialise the services placed on top of the Bluetooth stack ready for new connections */ RFCOMM_Initialize(); } diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c index 2ca6cfad745..2638dee3598 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c @@ -65,7 +65,7 @@ const uint8_t CRC8_Table[256] PROGMEM = RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS]; -/** Initializes the RFCOMM service, ready for new connections from a SDP client. */ +/** Initialises the RFCOMM service, ready for new connections from a SDP client. */ void RFCOMM_Initialize(void) { /* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */ diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt index 0b07e254c41..fef45c37766 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt @@ -51,7 +51,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt index 967c6b42835..4601390f636 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt +++ b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt index 65aa9d042b8..68ad1f26062 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt index 38f48aed01f..ffd194a6f94 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt index 50c147ba4c4..269bf5b5bbd 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt @@ -47,7 +47,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt index 168205811f3..871aa811188 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt @@ -55,7 +55,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.txt b/Demos/Host/LowLevel/MouseHost/MouseHost.txt index 4c0674b2689..6926e99b30b 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.txt +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt index 8e7fc9cdcc5..3d88fe36922 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt b/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt index bdb4a6e0ae1..b6b1786c836 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt @@ -50,7 +50,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c index edf56180e93..ec018bf3acb 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c @@ -122,7 +122,7 @@ uint8_t RNDIS_SendKeepAlive(void) return HOST_SENDCONTROL_Successful; } -/** Initializes the attached RNDIS device's RNDIS interface. +/** Initialises the attached RNDIS device's RNDIS interface. * * \param[in] HostMaxPacketSize Size of the packet buffer on the host * \param[out] DeviceMaxPacketSize Pointer to where the packet buffer size of the device is to be stored diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt index 829464f91bd..42601957848 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt +++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt @@ -50,7 +50,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt b/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt index b44543c6672..1ccf87ab84a 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt @@ -52,7 +52,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt index 7c4617f0e0c..3a7742248d5 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt +++ b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt @@ -53,7 +53,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h index 220017a2942..bcac84c7b3a 100644 --- a/LUFA/Common/Attributes.h +++ b/LUFA/Common/Attributes.h @@ -32,7 +32,7 @@ * \brief AVR-GCC special function/variable attribute macros. * * This file contains macros for applying GCC specific attributes to functions and variables to control various - * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype + * optimiser and code generation features of the compiler. Attributes may be placed in the function prototype * or variable declaration in any order, and multiple attributes can be specified for a single item via a space * separated list. * @@ -115,7 +115,7 @@ /** Forces the compiler to not automatically zero the given global variable on startup, so that the * current RAM contents is retained. Under most conditions this value will be random due to the - * behavior of volatile memory once power is removed, but may be used in some specific circumstances, + * behaviour of volatile memory once power is removed, but may be used in some specific circumstances, * like the passing of values back after a system watchdog reset. */ #define ATTR_NO_INIT __attribute__ ((section (".noinit"))) diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index 350585946c7..4f28543851d 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -80,7 +80,7 @@ #define MACROE while (0) /** Defines a volatile NOP statement which cannot be optimized out by the compiler, and thus can always - * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer + * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimiser * removes/reorders code to the point where break points cannot reliably be set. * * \ingroup Group_Debugging @@ -127,7 +127,7 @@ /** Swaps the byte ordering of a 16-bit value at compile time. Do not use this macro for swapping byte orderings * of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used - * inside struct or other variable initializers outside of a function, something that is not possible with the + * inside struct or other variable initialisers outside of a function, something that is not possible with the * inline function variant. * * \param[in] x 16-bit value whose byte ordering is to be swapped. @@ -138,7 +138,7 @@ /** Swaps the byte ordering of a 32-bit value at compile time. Do not use this macro for swapping byte orderings * of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used - * inside struct or other variable initializers outside of a function, something that is not possible with the + * inside struct or other variable initialisers outside of a function, something that is not possible with the * inline function variant. * * \param[in] x 32-bit value whose byte ordering is to be swapped. diff --git a/LUFA/DriverStubs/Dataflash.h b/LUFA/DriverStubs/Dataflash.h index c42062cc171..0df9ea11c0b 100644 --- a/LUFA/DriverStubs/Dataflash.h +++ b/LUFA/DriverStubs/Dataflash.h @@ -79,7 +79,7 @@ #define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index 11c31910a5c..02550a1db4b 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -99,7 +99,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate + /** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate * I/O pins to an inputs with pull-ups enabled. * * This must be called before any Button driver functions are used. diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index a3975e10573..92eae7a8f82 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -92,7 +92,7 @@ #define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index) /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void); diff --git a/LUFA/Drivers/Board/EVK527/Dataflash.h b/LUFA/Drivers/Board/EVK527/Dataflash.h index 612c6790868..4440d76ba79 100644 --- a/LUFA/Drivers/Board/EVK527/Dataflash.h +++ b/LUFA/Drivers/Board/EVK527/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 2953b72afed..4119a9be5a5 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -90,7 +90,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate + /** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate * I/O pins to inputs with their pull-ups enabled. */ static inline void Joystick_Init(void); diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 07289bc161e..b8e45559f44 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -58,7 +58,7 @@ * * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect. - * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D + * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when * a non-existing LED is referenced in application code. Note that this means that it is possible to make * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers) @@ -133,7 +133,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port + /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port * I/O pins as outputs, and sets the LEDs to default to off. */ static inline void LEDs_Init(void); diff --git a/LUFA/Drivers/Board/STK525/Dataflash.h b/LUFA/Drivers/Board/STK525/Dataflash.h index 2903e56bb41..2a1f7071403 100644 --- a/LUFA/Drivers/Board/STK525/Dataflash.h +++ b/LUFA/Drivers/Board/STK525/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/STK526/Dataflash.h b/LUFA/Drivers/Board/STK526/Dataflash.h index c7b118ea5ba..cb412440c16 100644 --- a/LUFA/Drivers/Board/STK526/Dataflash.h +++ b/LUFA/Drivers/Board/STK526/Dataflash.h @@ -85,7 +85,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h index ddba7c798af..d07446a675c 100644 --- a/LUFA/Drivers/Board/Temperature.h +++ b/LUFA/Drivers/Board/Temperature.h @@ -87,7 +87,7 @@ #define TEMP_MAX_TEMP ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET) /* Inline Functions: */ - /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel. + /** Initialises the temperature sensor driver, including setting up the appropriate ADC channel. * This must be called before any other temperature sensor routines. * * \pre The ADC itself (not the ADC channel) must be configured separately before calling the diff --git a/LUFA/Drivers/Board/USBKEY/Dataflash.h b/LUFA/Drivers/Board/USBKEY/Dataflash.h index b81510f0c45..27ff34e0764 100644 --- a/LUFA/Drivers/Board/USBKEY/Dataflash.h +++ b/LUFA/Drivers/Board/USBKEY/Dataflash.h @@ -88,7 +88,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/XPLAIN/Dataflash.h index 7e2719cf392..c1b8cd67283 100644 --- a/LUFA/Drivers/Board/XPLAIN/Dataflash.h +++ b/LUFA/Drivers/Board/XPLAIN/Dataflash.h @@ -91,7 +91,7 @@ #endif /* Inline Functions: */ - /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The AVR's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h index 835fee47eb3..098245d6dcc 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h @@ -350,7 +350,7 @@ return ADC_GetResult(); } - /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations. + /** Initialises the ADC, ready for conversions. This must be called before any other ADC operations. * The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and * prescaler masks. * diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h index e2c3d6a1059..51110598511 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h @@ -71,7 +71,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be + /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be * before any other TWI operations. */ static inline void TWI_Init(void) ATTR_ALWAYS_INLINE; diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h index 5bd7df44843..c6db9f96230 100644 --- a/LUFA/Drivers/Peripheral/SPI.h +++ b/LUFA/Drivers/Peripheral/SPI.h @@ -113,7 +113,7 @@ #define SPI_MODE_MASTER (1 << MSTR) /* Inline Functions: */ - /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other + /** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other * SPI routines. * * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*, diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h index 4eb74b9d242..23bbd6a4bb2 100644 --- a/LUFA/Drivers/Peripheral/Serial.h +++ b/LUFA/Drivers/Peripheral/Serial.h @@ -90,7 +90,7 @@ void Serial_TxString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1); /* Inline Functions: */ - /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to + /** Initialises the USART, ready for serial data transmission and reception. This initialises the interface to * standard 8-bit, no parity, 1 stop bit settings suitable for most applications. * * \param[in] BaudRate Serial baud rate, in bits per second. diff --git a/LUFA/Drivers/Peripheral/SerialStream.h b/LUFA/Drivers/Peripheral/SerialStream.h index 9a40048f6d1..938d8f0164a 100644 --- a/LUFA/Drivers/Peripheral/SerialStream.h +++ b/LUFA/Drivers/Peripheral/SerialStream.h @@ -82,7 +82,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initializes the serial stream (and regular USART driver) so that both the stream and regular + /** Initialises the serial stream (and regular USART driver) so that both the stream and regular * USART driver functions can be used. Must be called before any stream or regular USART functions. * * \param[in] BaudRate Baud rate to configure the USART to. diff --git a/LUFA/Drivers/USB/Class/Common/RNDIS.h b/LUFA/Drivers/USB/Class/Common/RNDIS.h index a6549c5e3d3..ab0126e24e1 100644 --- a/LUFA/Drivers/USB/Class/Common/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Common/RNDIS.h @@ -96,7 +96,7 @@ /** Enum for the possible NDIS adapter states. */ enum RNDIS_States_t { - RNDIS_Uninitialized = 0, /**< Adapter currently uninitialized. */ + RNDIS_Uninitialized = 0, /**< Adapter currently uninitialised. */ RNDIS_Initialized = 1, /**< Adapter currently initialized but not ready for data transfers. */ RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers. */ }; diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h index 9ea3deae5bd..e733bfecdc8 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDI.h +++ b/LUFA/Drivers/USB/Class/Device/MIDI.h @@ -129,7 +129,7 @@ /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the - * \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events. + * \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state. * diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h index 0d126b880bd..2cfb56e57a6 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDI.h +++ b/LUFA/Drivers/USB/Class/Host/MIDI.h @@ -143,7 +143,7 @@ MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the - * \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the + * \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the * pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI * events to be packed into a single pipe packet, increasing data throughput. * diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h index 34bbbb1837c..b1518ffed30 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h @@ -158,7 +158,7 @@ */ uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - /** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been + /** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been * configured via the call to \ref RNDIS_Host_ConfigurePipes(). * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state. diff --git a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h index 61dda2cbc73..001653b5220 100644 --- a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h @@ -218,7 +218,7 @@ * function. The routine updates the position and remaining configuration descriptor bytes values * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back * so that the next descriptor search invocation will start from the descriptor which first caused the - * original search to fail. This behavior allows for one comparator to be used immediately after another + * original search to fail. This behaviour allows for one comparator to be used immediately after another * has failed, starting the second search from the descriptor which failed the first. * * Comparator functions should be standard functions which accept a pointer to the header of the current diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index 42b0ec7d822..5c295b61fc2 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -189,7 +189,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -207,7 +207,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n diff --git a/LUFA/Drivers/USB/LowLevel/USBController.h b/LUFA/Drivers/USB/LowLevel/USBController.h index f26f7736013..f0db7faf4c5 100644 --- a/LUFA/Drivers/USB/LowLevel/USBController.h +++ b/LUFA/Drivers/USB/LowLevel/USBController.h @@ -264,7 +264,7 @@ * Valid mode masks are \ref USB_MODE_DEVICE, \ref USB_MODE_HOST or \ref USB_MODE_UID. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behavior. This should be comprised of + * interface to control the USB interface's behaviour. This should be comprised of * a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the * PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index 8e778762135..d97dc3718c4 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -37,11 +37,11 @@ * - The software UART in the XPLAINBridge has been largely altered to try to improve upon its performance and reliability * - The USBtoSerial and Benito projects now flushes received data via a flush timer, so that several bytes can be transmitted at once * - Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistencies between the - * behavior of the command line tools used to perform the check on each platform + * behaviour of the command line tools used to perform the check on each platform * - Internal USB driver source files renamed and moved to ease future possible architecture ports * - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability * - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED - * - Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a + * - Altered the CDC Device and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a * negative value (thanks to Andreas Paulin) * - Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer * @@ -220,7 +220,7 @@ * * Changed: * - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of key codes - * as this relied on non-standard OS driver behavior to repeat key groups + * as this relied on non-standard OS driver behaviour to repeat key groups * - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class * driver common defines, rather than being defined in the Host mode Class driver section only * - The USB_MODE_HOST token is now defined even when host mode is not available @@ -254,7 +254,7 @@ * devices from timing out the data pipes * - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts * - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing - * - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled + * - Fixed use of deprecated struct initialisers, removed library unused parameter warnings when compiled with -Wextra enabled * - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert) * - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be * used (thanks to Daniel Levy) @@ -338,7 +338,7 @@ * - Added new "Common" section to the class drivers, to hold all mode-independent definitions for clarity * - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code * - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls - * - Changed the parameters and behavior of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks + * - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks * and data validations internally, to simplify user code * - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles * - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect @@ -540,7 +540,7 @@ * USB_INITERROR_NoUSBModeSpecified * - Renamed USB_PowerOnFail event to USB_InitFailure * - Renamed OTG.h header functions to be more consistent with the rest of the library API - * - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander) + * - Changed over all deprecated GCC structure tag initialisers to the standardized C99 format (thanks to Mike Alexander) * - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode * rather than having the library pass only partially read header data to the application * - The USB_UnhandledControlPacket event has had its parameters removed, in favor of accessing the new USB_ControlRequest structure diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt index 6f2e804ad30..fbfbc3d9840 100644 --- a/LUFA/ManPages/CompileTimeTokens.txt +++ b/LUFA/ManPages/CompileTimeTokens.txt @@ -7,7 +7,7 @@ /** \page Page_TokenSummary Summary of Compile Tokens * * The following lists all the possible tokens which can be defined in a project makefile, and passed to the - * compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behavior, + * compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour, * or remove features unused by a given application in order to save flash space. * * @@ -87,7 +87,7 @@ * due to the extra code required to deal with byte alignment. * * USE_STATIC_OPTIONS=x - ( \ref Group_USBManagement ) \n - * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behavior, including whether the USB pad + * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt index 2a0d0c5333e..bc3cfe5d4b8 100644 --- a/LUFA/ManPages/MigrationInformation.txt +++ b/LUFA/ManPages/MigrationInformation.txt @@ -81,7 +81,7 @@ * Host Mode * - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send - * pipe bank is full. To override this new behavior and revert to the previous behavior, the user application may manually + * pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually * flush the queued event(s) to the device by calling \ref MIDI_Host_Flush(). * - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address * is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint @@ -90,7 +90,7 @@ * Device Mode * - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send - * endpoint bank is full. To override this new behavior and revert to the previous behavior, the user application may manually + * endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually * flush the queued event(s) to the host by calling \ref MIDI_Device_Flush(). * * \section Sec_Migration091223 Migrating from 091122 to 091223 @@ -122,11 +122,11 @@ * - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library. * - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See * the \ref SPI_Init() function documentation for more details - * - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a + * - The \ref Dataflash_Init() routine no longer initialises the SPI bus - the SPI bus should be initialized manually via a * call to SPI_Init() before using the Dataflash driver * * Host Mode - * - The USB_GetDeviceConfigDescriptor() function's parameters and behavior has changed; the user is required to + * - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to * preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single * call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user * application perform these intermediary steps. @@ -435,7 +435,7 @@ * * Library Demos * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations - * of the RNDIS specification, which had non-standard behavior. Projects built upon the demo should upgrade + * of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade * to the latest code. * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where * possible any existing devices upgrade to the latest bootloader code. diff --git a/LUFA/Scheduler/Scheduler.h b/LUFA/Scheduler/Scheduler.h index d9fe3b8fd60..673a933f8e9 100644 --- a/LUFA/Scheduler/Scheduler.h +++ b/LUFA/Scheduler/Scheduler.h @@ -145,7 +145,7 @@ */ void Scheduler_Start(void); - /** Initializes the scheduler so that the scheduler functions can be called before the scheduler itself + /** Initialises the scheduler so that the scheduler functions can be called before the scheduler itself * is started. This must be executed before any scheduler function calls other than Scheduler_Start(), * and can be omitted if no such functions could be called before the scheduler is started. */ diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt index eb2c244106a..c278c5cdfd0 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.txt +++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt @@ -203,7 +203,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c index 7c40ff847d1..47ce43bca29 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c @@ -132,7 +132,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK) PORTB ^= (1 << 1); } -/** Initializes the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for +/** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for * communication with the attached target. */ void ISPTarget_Init(void) diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c index 9e210c26a6e..45d840bbc5f 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.c +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c @@ -50,7 +50,7 @@ ISR(TIMER0_COMPA_vect, ISR_NOBLOCK) TimeoutTicksRemaining--; } -/** Initializes the hardware and software associated with the V2 protocol command handling. */ +/** Initialises the hardware and software associated with the V2 protocol command handling. */ void V2Protocol_Init(void) { #if defined(ADC) diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt index 806397c6cc5..af37284ff17 100644 --- a/Projects/Benito/Benito.txt +++ b/Projects/Benito/Benito.txt @@ -58,7 +58,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/Benito/Lib/LightweightRingBuff.h b/Projects/Benito/Lib/LightweightRingBuff.h index 1d6e07fded9..2faef438288 100644 --- a/Projects/Benito/Lib/LightweightRingBuff.h +++ b/Projects/Benito/Lib/LightweightRingBuff.h @@ -62,7 +62,7 @@ } RingBuff_t; /* Inline Functions: */ - /** Initializes a ring buffer ready for use. Buffers must be initialized via this function + /** Initialises a ring buffer ready for use. Buffers must be initialized via this function * before any operations are called upon them. Already initialized buffers may be reset * by re-initializing them using this function. * @@ -172,4 +172,4 @@ } #endif - \ No newline at end of file + diff --git a/Projects/LEDNotifier/LEDNotifier.txt b/Projects/LEDNotifier/LEDNotifier.txt index db8d6225dbf..dae6b6f2fb9 100644 --- a/Projects/LEDNotifier/LEDNotifier.txt +++ b/Projects/LEDNotifier/LEDNotifier.txt @@ -50,7 +50,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/Magstripe/Lib/CircularBitBuffer.h b/Projects/Magstripe/Lib/CircularBitBuffer.h index 973c7c26cc6..04322fbe98f 100644 --- a/Projects/Magstripe/Lib/CircularBitBuffer.h +++ b/Projects/Magstripe/Lib/CircularBitBuffer.h @@ -71,7 +71,7 @@ } BitBuffer_t; /* Function Prototypes: */ - /** Initializes or resets a given bit buffer, ready to store new bits. + /** Initialises or resets a given bit buffer, ready to store new bits. * * \param[in,out] Buffer Bit buffer to initialize */ diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h index 7afde48e859..5b20fc433cc 100644 --- a/Projects/Magstripe/Lib/MagstripeHW.h +++ b/Projects/Magstripe/Lib/MagstripeHW.h @@ -76,7 +76,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initializes the magnetic stripe card reader ports and pins so that the card reader + /** Initialises the magnetic stripe card reader ports and pins so that the card reader * device can be controlled and read by the card reader driver. This must be called before * trying to read any of the card reader's status lines. */ diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt index d3dfd291b15..29258ed49bd 100644 --- a/Projects/Magstripe/Magstripe.txt +++ b/Projects/Magstripe/Magstripe.txt @@ -97,7 +97,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/MissileLauncher/MissileLauncher.txt b/Projects/MissileLauncher/MissileLauncher.txt index d9ffd57b329..d93c21da109 100644 --- a/Projects/MissileLauncher/MissileLauncher.txt +++ b/Projects/MissileLauncher/MissileLauncher.txt @@ -47,7 +47,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/TempDataLogger/Lib/FATFs/ff.c b/Projects/TempDataLogger/Lib/FATFs/ff.c index 6b393747f9d..0aedb6bc4d7 100644 --- a/Projects/TempDataLogger/Lib/FATFs/ff.c +++ b/Projects/TempDataLogger/Lib/FATFs/ff.c @@ -45,7 +45,7 @@ / Fixed f_mkdir() on FAT32 creates incorrect directory. / Feb 03,'08 R0.05a Added f_truncate() and f_utime(). / Fixed off by one error at FAT sub-type determination. -/ Fixed btr in f_read() can be mistruncated. +/ Fixed btr in f_read() can be mis-truncated. / Fixed cached sector is not flushed when create and close / without write. / @@ -495,7 +495,7 @@ DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status BYTE *p; - if (clst < 2 || clst >= fs->n_fatent) /* Chack range */ + if (clst < 2 || clst >= fs->n_fatent) /* Check range */ return 1; switch (fs->fs_type) { @@ -1321,7 +1321,7 @@ FRESULT create_name ( if (w != ' ' && w != '.') break; di--; } - if (!di) return FR_INVALID_NAME; /* Reject nul string */ + if (!di) return FR_INVALID_NAME; /* Reject null string */ lfn[di] = 0; /* LFN is created */ @@ -1458,7 +1458,7 @@ FRESULT create_name ( *path = &p[si]; /* Return pointer to the next segment */ c = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ - if (!i) return FR_INVALID_NAME; /* Reject nul string */ + if (!i) return FR_INVALID_NAME; /* Reject null string */ if (sfn[0] == 0xE5) sfn[0] = 0x05; /* When first char collides with 0xE5, replace it with 0x05 */ if (ni == 8) b <<= 2; @@ -1582,7 +1582,7 @@ FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ dj->sclust = 0; /* Start from the root dir */ #endif - if ((UINT)*path < ' ') { /* Nul path means the start directory itself */ + if ((UINT)*path < ' ') { /* Null path means the start directory itself */ res = dir_sdi(dj, 0); dj->dir = 0; @@ -1723,7 +1723,7 @@ FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occurred */ if (fmt == 3) return FR_DISK_ERR; if (fmt) return FR_NO_FILESYSTEM; /* No FAT volume is found */ - /* Following code initializes the file system object */ + /* Following code initialises the file system object */ if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs)) /* (BPB_BytsPerSec must be equal to the physical sector size) */ return FR_NO_FILESYSTEM; @@ -2527,7 +2527,7 @@ FRESULT f_lseek ( #if _FS_MINIMIZE <= 1 /*-----------------------------------------------------------------------*/ -/* Create a Directroy Object */ +/* Create a Directory Object */ /*-----------------------------------------------------------------------*/ FRESULT f_opendir ( @@ -2878,7 +2878,7 @@ FRESULT f_mkdir ( mem_set(dir, 0, SS(dj.fs)); } } - if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directoy */ + if (res == FR_OK) res = dir_register(&dj); /* Register the object to the directory */ if (res != FR_OK) { remove_chain(dj.fs, dcl); /* Could not register, remove cluster chain */ } else { @@ -3177,7 +3177,7 @@ FRESULT f_mkfs ( if (au == 0) au = 1; if (au > 128) au = 128; - /* Pre-compute number of clusters and FAT syb-type */ + /* Pre-compute number of clusters and FAT sub-type */ n_clst = n_vol / au; fmt = FS_FAT12; if (n_clst >= MIN_FAT16) fmt = FS_FAT16; diff --git a/Projects/TempDataLogger/Lib/FATFs/ff.h b/Projects/TempDataLogger/Lib/FATFs/ff.h index 4da8dfdbe17..19b6a15b692 100644 --- a/Projects/TempDataLogger/Lib/FATFs/ff.h +++ b/Projects/TempDataLogger/Lib/FATFs/ff.h @@ -334,7 +334,7 @@ typedef struct { DWORD dsect; /* Current data sector */ #if !_FS_READONLY DWORD dir_sect; /* Sector containing the directory entry */ - BYTE* dir_ptr; /* Ponter to the directory entry in the window */ + BYTE* dir_ptr; /* Pointer to the directory entry in the window */ #endif #if _USE_FASTSEEK DWORD* cltbl; /* Pointer to the cluster link map table */ @@ -429,7 +429,7 @@ FRESULT f_sync (FIL*); /* Flush cached data of a writing file */ FRESULT f_unlink (const TCHAR*); /* Delete an existing file or directory */ FRESULT f_mkdir (const TCHAR*); /* Create a new directory */ FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attribute of the file/dir */ -FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change timestamp of the file/dir */ +FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change time-stamp of the file/dir */ FRESULT f_rename (const TCHAR*, const TCHAR*); /* Rename/Move a file or directory */ #endif #if _USE_FORWARD diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs index 0168fb8cfd5..52a2110db3a 100644 --- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs +++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs @@ -101,7 +101,7 @@ namespace Project1HostApp try { ConnectionHandle.Write(0x00, DeviceReport.ToReport()); - MessageBox.Show("Device parameters updated sucessfully."); + MessageBox.Show("Device parameters updated successfully."); } catch (Exception ex) { @@ -156,7 +156,7 @@ namespace Project1HostApp nudLogInterval.Value = nudLogInterval.Minimum; } - MessageBox.Show("Device parameters retrieved sucessfully."); + MessageBox.Show("Device parameters retrieved successfully."); } catch (Exception ex) { diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt index a76748e38e3..f15733850be 100644 --- a/Projects/TempDataLogger/TemperatureDataLogger.txt +++ b/Projects/TempDataLogger/TemperatureDataLogger.txt @@ -67,7 +67,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * *
* diff --git a/Projects/USBtoSerial/Lib/LightweightRingBuff.h b/Projects/USBtoSerial/Lib/LightweightRingBuff.h index 1d6e07fded9..2faef438288 100644 --- a/Projects/USBtoSerial/Lib/LightweightRingBuff.h +++ b/Projects/USBtoSerial/Lib/LightweightRingBuff.h @@ -62,7 +62,7 @@ } RingBuff_t; /* Inline Functions: */ - /** Initializes a ring buffer ready for use. Buffers must be initialized via this function + /** Initialises a ring buffer ready for use. Buffers must be initialized via this function * before any operations are called upon them. Already initialized buffers may be reset * by re-initializing them using this function. * @@ -172,4 +172,4 @@ } #endif - \ No newline at end of file + diff --git a/Projects/USBtoSerial/USBtoSerial.txt b/Projects/USBtoSerial/USBtoSerial.txt index aacf63b2a52..57802ecc8fa 100644 --- a/Projects/USBtoSerial/USBtoSerial.txt +++ b/Projects/USBtoSerial/USBtoSerial.txt @@ -65,7 +65,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/Webserver/Lib/FATFs/ff.c b/Projects/Webserver/Lib/FATFs/ff.c index 1e53131a6b6..e4d52346359 100644 --- a/Projects/Webserver/Lib/FATFs/ff.c +++ b/Projects/Webserver/Lib/FATFs/ff.c @@ -1321,7 +1321,7 @@ FRESULT create_name ( if (w != ' ' && w != '.') break; di--; } - if (!di) return FR_INVALID_NAME; /* Reject nul string */ + if (!di) return FR_INVALID_NAME; /* Reject null string */ lfn[di] = 0; /* LFN is created */ @@ -1458,7 +1458,7 @@ FRESULT create_name ( *path = &p[si]; /* Return pointer to the next segment */ c = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */ - if (!i) return FR_INVALID_NAME; /* Reject nul string */ + if (!i) return FR_INVALID_NAME; /* Reject null string */ if (sfn[0] == 0xE5) sfn[0] = 0x05; /* When first char collides with 0xE5, replace it with 0x05 */ if (ni == 8) b <<= 2; @@ -1582,7 +1582,7 @@ FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ dj->sclust = 0; /* Start from the root dir */ #endif - if ((UINT)*path < ' ') { /* Nul path means the start directory itself */ + if ((UINT)*path < ' ') { /* Null path means the start directory itself */ res = dir_sdi(dj, 0); dj->dir = 0; @@ -1723,7 +1723,7 @@ FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occurred */ if (fmt == 3) return FR_DISK_ERR; if (fmt) return FR_NO_FILESYSTEM; /* No FAT volume is found */ - /* Following code initializes the file system object */ + /* Following code initialises the file system object */ if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs)) /* (BPB_BytsPerSec must be equal to the physical sector size) */ return FR_NO_FILESYSTEM; @@ -3177,7 +3177,7 @@ FRESULT f_mkfs ( if (au == 0) au = 1; if (au > 128) au = 128; - /* Pre-compute number of clusters and FAT syb-type */ + /* Pre-compute number of clusters and FAT sub-type */ n_clst = n_vol / au; fmt = FS_FAT12; if (n_clst >= MIN_FAT16) fmt = FS_FAT16; diff --git a/Projects/Webserver/Lib/FATFs/ff.h b/Projects/Webserver/Lib/FATFs/ff.h index 603e31347a3..19b6a15b692 100644 --- a/Projects/Webserver/Lib/FATFs/ff.h +++ b/Projects/Webserver/Lib/FATFs/ff.h @@ -429,7 +429,7 @@ FRESULT f_sync (FIL*); /* Flush cached data of a writing file */ FRESULT f_unlink (const TCHAR*); /* Delete an existing file or directory */ FRESULT f_mkdir (const TCHAR*); /* Create a new directory */ FRESULT f_chmod (const TCHAR*, BYTE, BYTE); /* Change attribute of the file/dir */ -FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change timestamp of the file/dir */ +FRESULT f_utime (const TCHAR*, const FILINFO*); /* Change time-stamp of the file/dir */ FRESULT f_rename (const TCHAR*, const TCHAR*); /* Rename/Move a file or directory */ #endif #if _USE_FORWARD diff --git a/Projects/Webserver/Lib/uip/uip.c b/Projects/Webserver/Lib/uip/uip.c index 9b883a8e951..36053029a0e 100644 --- a/Projects/Webserver/Lib/uip/uip.c +++ b/Projects/Webserver/Lib/uip/uip.c @@ -53,7 +53,7 @@ * statement. While it would be possible to break the uip_process() * function into many smaller functions, this would increase the code * size because of the overhead of parameter passing and the fact that - * the optimier would not be as efficient. + * the optimiser would not be as efficient. * * The principle is that we have a small buffer, called the uip_buf, * in which the device driver puts an incoming packet. The TCP/IP @@ -598,7 +598,7 @@ uip_reass(void) ~bitmap_bits[((offset + len) / 8 ) & 7]; } else { /* If the two endpoints are in different bytes, we update the - bytes in the endpoints and fill the stuff inbetween with + bytes in the endpoints and fill the stuff in-between with 0xff. */ uip_reassbitmap[offset / (8 * 8)] |= bitmap_bits[(offset / 8 ) & 7]; @@ -749,7 +749,7 @@ uip_process(u8_t flag) goto tcp_send_nodata; } - /* Exponential backoff. */ + /* Exponential back-off. */ uip_connr->timer = UIP_RTO << (uip_connr->nrtx > 4? 4: uip_connr->nrtx); @@ -1297,7 +1297,7 @@ uip_process(u8_t flag) with a connection in LISTEN. In that case, we should create a new connection and send a SYNACK in return. */ found_listen: - /* First we check if there are any connections avaliable. Unused + /* First we check if there are any connections available. Unused connections are kept in the same table as used connections, but unused ones have the tcpstate set to CLOSED. Also, connections in TIME_WAIT are kept track of and we'll use the oldest one if no diff --git a/Projects/Webserver/Lib/uip/uip.h b/Projects/Webserver/Lib/uip/uip.h index a10699dc16e..abc72208f4f 100644 --- a/Projects/Webserver/Lib/uip/uip.h +++ b/Projects/Webserver/Lib/uip/uip.h @@ -62,14 +62,14 @@ */ #if UIP_CONF_IPV6 typedef union uip_ip6addr_t { - u8_t u8[16]; /* Initializer, must come first!!! */ + u8_t u8[16]; /* Initialiser, must come first!!! */ u16_t u16[8]; } uip_ip6addr_t; typedef uip_ip6addr_t uip_ipaddr_t; #else /* UIP_CONF_IPV6 */ typedef union uip_ip4addr_t { - u8_t u8[4]; /* Initializer, must come first!!! */ + u8_t u8[4]; /* Initialiser, must come first!!! */ u16_t u16[2]; #if 0 u32_t u32; @@ -232,7 +232,7 @@ typedef struct uip_eth_addr uip_lladdr_t; /** * uIP initialization function. * - * This function should be called at boot up to initilize the uIP + * This function should be called at boot up to initialise the uIP * TCP/IP stack. */ void uip_init(void); @@ -311,7 +311,7 @@ void uip_setipid(u16_t id); * Periodic processing for a connection identified by its number. * * This function does the necessary periodic processing (timers, - * polling) for a uIP TCP conneciton, and should be called when the + * polling) for a uIP TCP connection, and should be called when the * periodic uIP timer goes off. It should be called for every * connection, regardless of whether they are open of closed. * @@ -1426,17 +1426,17 @@ struct uip_stats { } icmp; /**< ICMP statistics. */ #if UIP_TCP struct { - uip_stats_t recv; /**< Number of recived TCP segments. */ + uip_stats_t recv; /**< Number of received TCP segments. */ uip_stats_t sent; /**< Number of sent TCP segments. */ uip_stats_t drop; /**< Number of dropped TCP segments. */ uip_stats_t chkerr; /**< Number of TCP segments with a bad checksum. */ uip_stats_t ackerr; /**< Number of TCP segments with a bad ACK number. */ - uip_stats_t rst; /**< Number of recevied TCP RST (reset) segments. */ + uip_stats_t rst; /**< Number of received TCP RST (reset) segments. */ uip_stats_t rexmit; /**< Number of retransmitted TCP segments. */ uip_stats_t syndrop; /**< Number of dropped SYNs due to too few - connections was avaliable. */ + connections was available. */ uip_stats_t synrst; /**< Number of SYNs for closed ports, triggering a RST. */ } tcp; /**< TCP statistics. */ @@ -1444,7 +1444,7 @@ struct uip_stats { #if UIP_UDP struct { uip_stats_t drop; /**< Number of dropped UDP segments. */ - uip_stats_t recv; /**< Number of recived UDP segments. */ + uip_stats_t recv; /**< Number of received UDP segments. */ uip_stats_t sent; /**< Number of sent UDP segments. */ uip_stats_t chkerr; /**< Number of UDP segments with a bad checksum. */ @@ -1453,7 +1453,7 @@ struct uip_stats { #if UIP_CONF_IPV6 struct { uip_stats_t drop; /**< Number of dropped ND6 packets. */ - uip_stats_t recv; /**< Number of recived ND6 packets */ + uip_stats_t recv; /**< Number of received ND6 packets */ uip_stats_t sent; /**< Number of sent ND6 packets */ } nd6; #endif /*UIP_CONF_IPV6*/ diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt index 2e8e9bc5c7f..c89810fbd52 100644 --- a/Projects/Webserver/Webserver.txt +++ b/Projects/Webserver/Webserver.txt @@ -69,7 +69,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
* diff --git a/Projects/XPLAINBridge/Lib/LightweightRingBuff.h b/Projects/XPLAINBridge/Lib/LightweightRingBuff.h index 1d6e07fded9..2faef438288 100644 --- a/Projects/XPLAINBridge/Lib/LightweightRingBuff.h +++ b/Projects/XPLAINBridge/Lib/LightweightRingBuff.h @@ -62,7 +62,7 @@ } RingBuff_t; /* Inline Functions: */ - /** Initializes a ring buffer ready for use. Buffers must be initialized via this function + /** Initialises a ring buffer ready for use. Buffers must be initialized via this function * before any operations are called upon them. Already initialized buffers may be reset * by re-initializing them using this function. * @@ -172,4 +172,4 @@ } #endif - \ No newline at end of file + diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c index 8710722e43d..05dd8a4b514 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.c +++ b/Projects/XPLAINBridge/Lib/SoftUART.c @@ -51,7 +51,7 @@ static uint8_t RX_BitsRemaining; /** Temporary data variable to hold the byte being received as it is shifted in */ static uint8_t RX_Data; -/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */ +/** Initialises the software UART, ready for data transmission and reception into the global ring buffers. */ void SoftUART_Init(void) { /* Set TX pin to output high, enable RX pull-up */ diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index 766dbf2d4f3..fe7e739f149 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -70,7 +70,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. + * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. * *
*