mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-07-16 04:41:28 +00:00
Update bootloader documentation to include execution instructions.
This commit is contained in:
parent
d90ef9aa2f
commit
0c15a45128
@ -57,6 +57,22 @@
|
||||
* \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device
|
||||
* lockbits are set.
|
||||
*
|
||||
* \section Sec_Running Running the Bootloader
|
||||
*
|
||||
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
|
||||
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
|
||||
* fuse is cleared.
|
||||
*
|
||||
* For board specific exceptions to the above, see below.
|
||||
*
|
||||
* \subsection SSec_XPLAIN Atmel Xplain Board
|
||||
* Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the
|
||||
* \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \subsection SSec_Leonardo Arduino Leonardo Board
|
||||
* Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the
|
||||
* \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \section Sec_Installation Driver Installation
|
||||
*
|
||||
* After running this bootloader for the first time on a new computer, you will need to supply the .INF
|
||||
|
@ -55,6 +55,22 @@
|
||||
* When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
|
||||
* bootloader from the normal user application.
|
||||
*
|
||||
* \section Sec_Running Running the Bootloader
|
||||
*
|
||||
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
|
||||
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
|
||||
* fuse is cleared.
|
||||
*
|
||||
* For board specific exceptions to the above, see below.
|
||||
*
|
||||
* \subsection SSec_XPLAIN Atmel Xplain Board
|
||||
* Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the
|
||||
* \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \subsection SSec_Leonardo Arduino Leonardo Board
|
||||
* Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the
|
||||
* \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \section Sec_Installation Driver Installation
|
||||
*
|
||||
* This bootloader is designed to be compatible with Atmel's provided Windows DFU class drivers. You will need to
|
||||
|
@ -59,6 +59,12 @@
|
||||
* \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device
|
||||
* lockbits are set.
|
||||
*
|
||||
* \section Sec_Running Running the Bootloader
|
||||
*
|
||||
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
|
||||
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
|
||||
* fuse is cleared.
|
||||
*
|
||||
* \section Sec_Installation Driver Installation
|
||||
*
|
||||
* This bootloader uses the HID class driver inbuilt into all modern operating systems, thus no additional drivers
|
||||
|
@ -60,6 +60,22 @@
|
||||
* \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device
|
||||
* lockbits are set.
|
||||
*
|
||||
* \section Sec_Running Running the Bootloader
|
||||
*
|
||||
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
|
||||
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
|
||||
* fuse is cleared.
|
||||
*
|
||||
* For board specific exceptions to the above, see below.
|
||||
*
|
||||
* \subsection SSec_XPLAIN Atmel Xplain Board
|
||||
* Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the
|
||||
* \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \subsection SSec_Leonardo Arduino Leonardo Board
|
||||
* Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the
|
||||
* \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board.
|
||||
*
|
||||
* \section Sec_Installation Driver Installation
|
||||
*
|
||||
* This bootloader uses the Mass Storage drivers inbuilt into all modern operating systems, thus no additional
|
||||
|
@ -54,6 +54,12 @@
|
||||
* When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
|
||||
* bootloader from the normal user application.
|
||||
*
|
||||
* \section Sec_Running Running the Bootloader
|
||||
*
|
||||
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
|
||||
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
|
||||
* fuse is cleared.
|
||||
*
|
||||
* \section Sec_Installation Driver Installation
|
||||
*
|
||||
* This bootloader uses the Generic Text-Only printer drivers inbuilt into all modern operating systems, thus no
|
||||
|
Loading…
Reference in New Issue
Block a user