[Keyboard] just60: fixes per suggestions

keyboards/just60/just60.c

@@ -1,50 +0,0 @@
-/* Copyright 2019 Jianfei Wang
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "just60.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-bool led_update_kb(led_t led_state) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-    return led_update_user(led_state);
-}
-*/

keyboards/just60/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2019 Jianfei Wang
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/just60/keymaps/default/keymap.c

@@ -22,11 +22,6 @@ enum layer_names {
     _COMMAND
 };
 
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-    QMKBEST = SAFE_RANGE,
-};
-
 #define FN_SPC LT(_FN, KC_SPC)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -50,18 +45,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-        QMKBEST, _______, _______, _______,          _______,          _______, _______,          _______, _______, _______, _______
+        _______, _______, _______, _______,          _______,          _______, _______,          _______, _______, _______, _______
      )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch (keycode) {
-        case QMKBEST:
-            if (record->event.pressed) {
-                // when keycode QMKBEST is pressed
-                SEND_STRING("All Hail God Yang!");
-            }
-           break;
-    }
-    return true;
-}

keyboards/just60/readme.md

@@ -2,7 +2,7 @@
 
 Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
 
-To use a QMK based firmware, you might want install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is always the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
+To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
 
 Backlight LEDs and Bluetooth are not working yet.
 

keyboards/just60/rules.mk

@@ -1,9 +1,7 @@
 # MCU name
 MCU = atmega32u4
+# Processor frequency
 F_CPU = 8000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 # Bootloader selection
 #   Teensy       halfkay