qmk_firmware/keyboards/keebio/iris/keymaps/two_knob/keymap.c

262 lines
13 KiB
C
Raw Normal View History

// Copyright 2022 Ryan Neff (@JellyTitan)
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
enum custom_layers {
_QWERTY,
_LOWER,
_RAISE,
_ADJUST,
};
/* Defines macros for use with the configurators "Any" key. (These are non-standard macros). */
/* Move active application right half. */
#define KC_CSGRA LCTL(LSFT(LGUI(KC_RGHT)))
/* Move active application to left half. */
#define KC_CSGLA LCTL(LSFT(LGUI(KC_LEFT)))
/* Maximize active application. */
#define KC_MAXIM LCTL(LSFT(LGUI(KC_UP)))
/* Minimize active application. */
#define KC_MINIM LCTL(LSFT(LGUI(KC_DOWN)))
/* Rotary encoder variables used to hold down Command (GUI) key while cycling through open programs. */
bool is_cmd_tab_active = false;
uint16_t cmd_tab_timer = 0;
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
CMD_TAB_CW,
CMD_TAB_CCW,
};
/**
* Tap Dance declarations
*/
enum tapdances {
_TD_FIVE_ENTER,
};
/* Tapdance */
#define TD_FIVE_ENTER TD(_TD_FIVE_ENTER)
/**
* Tap Dance definitions
*
* NOTE - if your not using tapdance, comment out:
* TAP_DANCE_ENABLE = yes in rules.mk
* define TAPPING_TERM 175 in config.h
* else you'll get a compile error.
*
* To use this in the configurator, enter the name 'TD_FIVE_ENTER' in the "Any" key.
*/
qk_tap_dance_action_t tap_dance_actions[] = {
/* Tap once for 5, twice for Enter. */
[_TD_FIVE_ENTER] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT),
};
/**
* Keymap. Generated via configurator.
*
* You can download/upload the two_know.json to the configurator:
* https://config.qmk.fm/#/keebio/iris/rev6a/LAYOUT
*
* If you make changes and download the json, you can run qmk json2c two_knob.json to get converted text.
* You can copy and paste it here.
* You will have to reneame the array keys from ints to the custom keycode names.
*
* The rotary encoders are programmed manually below because the configurator does not support them yet.
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(KC_EQL, KC_1, KC_2, KC_3, KC_4, TD_FIVE_ENTER, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, LT(1, KC_DEL), LT(2, KC_A), LCTL_T(KC_S), KC_D, LGUI_T(KC_F), KC_G, KC_H, RGUI_T(KC_J), KC_K, RCTL_T(KC_L), LT(2, KC_SCLN), LT(1, KC_QUOT), KC_LSPO, LALT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_MINIM, KC_MAXIM, KC_N, KC_M, KC_COMM, KC_DOT, RALT_T(KC_SLSH), KC_RSPC, QK_GESC, KC_SPC, KC_BSPC, KC_TAB, KC_ENT, KC_DEL),
[_LOWER] = LAYOUT(KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, DT_PRNT, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, DT_UP, KC_4, KC_5, KC_6, KC_PPLS, KC_TRNS, KC_TRNS, KC_HASH, KC_DLR, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS, DT_DOWN, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0),
[_RAISE] = LAYOUT(RGB_TOG, KC_ACL0, KC_ACL1, KC_ACL2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_UP, KC_BTN2, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_CSGLA, KC_CSGRA, KC_TRNS, KC_TRNS),
[_ADJUST] = LAYOUT(
//┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
//└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
_______, _______, _______, _______, _______, _______
// └────────┴────────┴────────┘ └────────┴────────┴────────┘
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
case CMD_TAB_CW:
if (record->event.pressed) {
if (!is_cmd_tab_active) {
is_cmd_tab_active = true;
register_code(KC_LGUI);
}
cmd_tab_timer = timer_read();
register_code(KC_TAB);
} else {
unregister_code(KC_TAB);
}
break;
case CMD_TAB_CCW:
if (record->event.pressed) {
if (!is_cmd_tab_active) {
is_cmd_tab_active = true;
register_code(KC_LGUI);
}
cmd_tab_timer = timer_read();
tap_code16(S(KC_TAB));
} else {
unregister_code(KC_TAB);
}
break;
}
return true;
}
/**
* Define lighting layers.
*
* Iris rev6a uses WS2812 RGB Matrix lighting.
* The RGB Matrix lighting option has already been enabled in ../../rev6a/config.h
* You'll need to add #define SPLIT_LAYER_STATE_ENABLE to config.h if you
* will be customizing the LED's per key.
*
* Here's how to customize the colors per layer and per key:
* https://github.com/qmk/qmk_firmware/blob/master/docs/feature_rgb_matrix.md#direct-operation-iddirect-operation
*
* If you start getting real weird with it, your likely to exceed the firmware limit of 28672.
* You may need to selectively disable some effects:
* https://github.com/qmk/qmk_firmware/blob/master/docs/feature_rgb_matrix.md#rgb-matrix-effects-idrgb-matrix-effects
*
* There are 68 Leds. Printed on the board itself, the led numbers are 1-68.
* For color addressing, use 0-67 as the index number.
* rgb_matrix_set_color(index, r, g, b)
*
* Here's an LED number guide:
* FRONT
* Left Hand Right Hand
* |00|01|02|03|04|05| |39|38|37|36|35|34|
* |11|10|09|08|07|06| |40|41|42|43|44|45|
* |12|13|14|15|16|17| |51|50|49|48|47|46|
* |23|22|21|20|19|18|27| |61|52|53|54|55|56|57|
* |24|25|26| |60|59|58|
* REVERSE
* Right Hand Left Hand
* |65|--|--|66|--|67| |33|--|32|--|--|31|
* |--|--|--|--|--|--| |--|--|--|--|--|--|
* |--|--|--|--|--|--| |--|--|--|--|--|--|
* |64|--|--|63|--|--|--| |--|--|--|29|--|--|30|
* |--|62|--| |--|28|--|
*/
// void rgb_matrix_indicators_user(void) {
// if (IS_LAYER_ON(1)) {
// /* Upperleft most key red: */
// rgb_matrix_set_color(0,255,0,0);
// /* Upperright most front key blue: */
// rgb_matrix_set_color(0,0,255,0);
// /* Bottom right on lefthand Green: */
// rgb_matrix_set_color(0, RGB_GREEN);
// }
// else if (IS_LAYER_ON(2)) {
// /* RGB +/- controls. */
// rgb_matrix_set_color(35, RGB_RED);
// rgb_matrix_set_color(34, RGB_BLUE);
// rgb_matrix_set_color(37, RGB_RED);
// rgb_matrix_set_color(36, RGB_BLUE);
// rgb_matrix_set_color(44, RGB_RED);
// rgb_matrix_set_color(45, RGB_BLUE);
// rgb_matrix_set_color(47, RGB_RED);
// rgb_matrix_set_color(46, RGB_BLUE);
// rgb_matrix_set_color(56, RGB_RED);
// rgb_matrix_set_color(57, RGB_BLUE);
// /* RGB Toggle. */
// rgb_matrix_set_color(00, RGB_PURPLE);
// /* Move screen left/right. */
// rgb_matrix_set_color(26, RGB_YELLOW);
// rgb_matrix_set_color(60, RGB_YELLOW);
// /* Arrow keys. */
// rgb_matrix_set_color(50, RGB_PURPLE);
// rgb_matrix_set_color(49, RGB_PURPLE);
// rgb_matrix_set_color(48, RGB_PURPLE);
// rgb_matrix_set_color(42, RGB_PURPLE);
// /* Mouse movement arrows. */
// rgb_matrix_set_color(14, RGB_ORANGE);
// rgb_matrix_set_color(15, RGB_ORANGE);
// rgb_matrix_set_color(16, RGB_ORANGE);
// rgb_matrix_set_color(8, RGB_ORANGE);
// /* Mouse buttons. */
// rgb_matrix_set_color(41, RGB_ORANGE);
// rgb_matrix_set_color(43, RGB_ORANGE);
// /* Mouse acceleration. */
// rgb_matrix_set_color(01, 200, 165, 0);
// rgb_matrix_set_color(02, 255, 200, 0);
// rgb_matrix_set_color(03, 255, 235, 0);
// }
// }
/**
* Rotary Encoder.
*
* This can't be programmed through configurator. You must do it here.
*
* This uses the amazing "Encoder map" feature which replicates the normal keyswitch layer handling functionality, but with encoders.
* https://docs.qmk.fm/#/feature_encoders?id=encoder-map
*
* Uses a variant of the Super-alt-tab macro to switch between open applications on a mac. (Command-tab)
* https://docs.qmk.fm/#/feature_macros?id=super-alt%e2%86%aftab
*/
#if defined(ENCODER_MAP_ENABLE)
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
/* Left Hand */ /* Right Hand */
/* Switch between tabs. (Control + Tab). */ /* Switch between open apps on Mac. (Command + Tab + timer logic) */
[_QWERTY] = { ENCODER_CCW_CW(S(C(KC_TAB)), C(KC_TAB)), ENCODER_CCW_CW(CMD_TAB_CCW, CMD_TAB_CW) },
/* Scrolls left & right. (Shift + Mouse Wheel Up). */ /* Scrolls up and down. (Page Down & Page Up - mouse wheel scroll incraments are too small) */
[_LOWER] = { ENCODER_CCW_CW(S(KC_MS_WH_UP), S(KC_MS_WH_DOWN)), ENCODER_CCW_CW(KC_PGDN, KC_PGUP) },
/* Selects adjacent words. (Command + Shift + Right Arrow). */ /* Jumps to end/start of line. Hold shift to select. (Gui + arrow). */
[_RAISE] = { ENCODER_CCW_CW(C(S(KC_LEFT)), C(S(KC_RGHT))), ENCODER_CCW_CW(G(KC_LEFT), G(KC_RGHT)) },
/* Scroll through RGB Modes */ /* Right & left arrow */
[_ADJUST] = { ENCODER_CCW_CW(RGB_RMOD, RGB_MOD), ENCODER_CCW_CW(KC_LEFT, KC_RGHT) },
};
#endif
/**
* Helper function for rotary encoder.
*
* If the timer has elapsed, the Command/Gui tab will be released.
* You can adjust the milliseconds to speed up the CMD key release.
*/
void matrix_scan_user(void) {
if (is_cmd_tab_active) {
if (timer_elapsed(cmd_tab_timer) > 900) {
unregister_code(KC_LGUI);
is_cmd_tab_active = false;
}
}
}