qmk_firmware/keyboards/clueboard/2x1800/2019/config.h

215 lines
6.4 KiB
C
Raw Normal View History

2018-04-01 19:12:45 +00:00
/*
Copyright 2017 Zach White <skullydazed@clueboard.co>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
2018-04-01 19:12:45 +00:00
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xC1ED
#define PRODUCT_ID 0x23A0
#define DEVICE_VER 0x0002
2018-04-01 19:12:45 +00:00
#define MANUFACTURER Clueboard
#define PRODUCT 2x1800 2019
#define DESCRIPTION Mechanical Drawing Toy Edition
2018-04-01 19:12:45 +00:00
/* key matrix size */
#define MATRIX_ROWS 13
2018-04-01 19:12:45 +00:00
#define MATRIX_COLS 11
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C0, C1, C2, C3, C7, F7, B1, F2, F3, F4, F5, F6, C6 }
2018-04-01 19:12:45 +00:00
#define MATRIX_COL_PINS { D2, D3, D4, D5, D7, E0, E1, B0, E6, B3, B2 }
#define UNUSED_PINS { D0, D1, D6, C5, E7, F0, F1 }
#define ENCODERS_PAD_A { A5, A4, A2, A1 }
#define ENCODERS_PAD_B { A6, A7, A3, A0 }
#define ENCODER_RESOLUTION 4
2018-04-01 19:12:45 +00:00
/* COL2ROW, ROW2COL*/
2018-04-01 19:12:45 +00:00
#define DIODE_DIRECTION ROW2COL
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
2018-04-01 19:12:45 +00:00
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* audio support */
#define B7_AUDIO
#define C4_AUDIO
Clueboard refresh (#4902) * Cluecard: refactor - renamed layout macro KEYMAP to LAYOUT - reformatted layout macro to more closely resemble physical device layout - keymaps now use #include QMK_KEYBOARD_H - config.h files updated to use #pragma once method - deleted outdated QUANTUM_DIR code blocks from rules.mk files - white space changes on rules.mk files (alignment/readability) * Cluecard: Configurator support * Cluecard: readme update - added image - updated Docs links * Clueboard 66% HotSwap: corrected matrix and Configurator data - removed k31 and k84 from LAYOUT - both appear to be unsupported for this PCB according to images on clueboard.co - updated block comment mock-ups to match changes - rebuilt info.json file - delete removed keys from default keymap.c * Clueboard 66% HotSwap: readme update - fix make example - updated Docs links * Clueboard 66% HotSwap: 66_ansi keymap update Updated to use #include QMK_KEYBOARD_H * Clueboard 60% refactor - renamed layout macro KEYMAP to LAYOUT_all - renamed layout macro KEYMAP_AEK to LAYOUT_aek - removed redundant KC_TRNS definitions from keymaps - all keymaps now use #include QMK_KEYBOARD_H * Clueboard 17%: refactor * Clueboard 17%: Configurator support * Clueboard 17%: update Docs links in readme * Cleanup the 2x1800 files * Update Clueboard 60% to standard matrix * Update the clueboard default keymaps * Refresh and update clueboard 17 * Add the 66% hotswap to Clueboard's readme * Clarify the 66% hotswap's readme * change the image to imgur * Update the clueboard 66 to follow modern standards * update clueboard 66_hotswap to follow modern practices * Move the logo to imgur * update clueboard/card to follow modern practices * remove clueboard/66 as a valid make target * Address comments in #4902 * fix user keymaps after the changes
2019-01-23 17:25:32 +00:00
#define AUDIO_CLICKY
2018-04-01 19:12:45 +00:00
/* number of backlight levels */
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define RGB_DI_PIN C5
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
2018-04-01 19:12:45 +00:00
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/*
* Drawing mode
*/
#define DRAWING_ENABLE
//#define UNDO_KEY LGUI(KC_Z) // What key to send for undo
//#define UNDO_KEY LCTL(KC_Z)
#define UNDO_KEY LGUI(KC_SLSH)
/*
* Shake to undo configuration
*/
#define SHAKE_ENABLE
#define SHAKE_PIN_A E4
#define SHAKE_PIN_B E5
#define SHAKE_TIMEOUT 500 // How long after shaking stops before we register it
#define SHAKE_COUNT 8 // How many shakes it takes to activate
#define SHAKE_KEY UNDO_KEY // What key to send after a shake