qmk_firmware/cli_commands.md

350 lines
7.7 KiB
Markdown
Raw Normal View History

# QMK CLI Commands
# User Commands
## `qmk compile`
This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
**Usage for Configurator Exports**:
```
qmk compile [-c] <configuratorExport.json>
```
**Usage for Keymaps**:
```
qmk compile [-c] [-e <var>=<value>] -kb <keyboard_name> -km <keymap_name>
```
**Usage in Keyboard Directory**:
Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
```
qmk compile
```
**Usage for building all keyboards that support a specific keymap**:
```
qmk compile -kb all -km <keymap_name>
```
**Example**:
```
$ qmk config compile.keymap=default
$ cd ~/qmk_firmware/keyboards/planck/rev6
$ qmk compile
Ψ Compiling keymap with make planck/rev6:default
...
```
or with optional keymap argument
```
$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4
$ qmk compile -km 66_iso
Ψ Compiling keymap with make clueboard/66/rev4:66_iso
...
```
or in keymap directory
```
$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
$ qmk compile
Ψ Compiling keymap with make make gh60/satan:colemak
...
```
**Usage in Layout Directory**:
Must be under `qmk_firmware/layouts/`, and in a keymap folder.
```
qmk compile -kb <keyboard_name>
```
**Example**:
```
$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
$ qmk compile -kb dz60
Ψ Compiling keymap with make dz60:mechmerlin-ansi
...
```
## `qmk flash`
This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default. To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
**Usage for Configurator Exports**:
```
qmk flash [-bl <bootloader>] [-c] [-e <var>=<value>] <configuratorExport.json>
```
**Usage for Keymaps**:
```
qmk flash -kb <keyboard_name> -km <keymap_name> [-bl <bootloader>] [-c] [-e <var>=<value>]
```
**Listing the Bootloaders**
```
qmk flash -b
```
## `qmk config`
This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
**Usage**:
```
qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
```
## `qmk doctor`
This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
**Usage**:
```
qmk doctor [-y] [-n]
```
**Examples**:
Check your environment for problems and prompt to fix them:
qmk doctor
Check your environment and automatically fix any problems found:
qmk doctor -y
Check your environment and report problems only:
qmk doctor -n
## `qmk info`
Displays information about keyboards and keymaps in QMK. You can use this to get information about a keyboard, show the layouts, display the underlying key matrix, or to pretty-print JSON keymaps.
**Usage**:
```
qmk info [-f FORMAT] [-m] [-l] [-km KEYMAP] [-kb KEYBOARD]
```
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
**Examples**:
Show basic information for a keyboard:
qmk info -kb planck/rev5
Show the matrix for a keyboard:
qmk info -kb ergodox_ez -m
Show a JSON keymap for a keyboard:
qmk info -kb clueboard/california -km default
## `qmk json2c`
Creates a keymap.c from a QMK Configurator export.
**Usage**:
```
qmk json2c [-o OUTPUT] filename
```
## `qmk c2json`
Creates a keymap.json from a keymap.c.
**Note:** Parsing C source files is not easy, therefore this subcommand may not work your keymap. In some cases not using the C pre-processor helps.
**Usage**:
```
qmk c2json -km KEYMAP -kb KEYBOARD [-q] [--no-cpp] [-o OUTPUT] filename
```
## `qmk lint`
Checks over a keyboard and/or keymap and highlights common errors, problems, and anti-patterns.
**Usage**:
```
qmk lint [-km KEYMAP] [-kb KEYBOARD] [--strict]
```
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
**Examples**:
Do a basic lint check:
qmk lint -kb rominronin/katana60/rev2
## `qmk list-keyboards`
This command lists all the keyboards currently defined in `qmk_firmware`
**Usage**:
```
qmk list-keyboards
```
## `qmk list-keymaps`
This command lists all the keymaps for a specified keyboard (and revision).
This command is directory aware. It will automatically fill in KEYBOARD if you are in a keyboard directory.
**Usage**:
```
qmk list-keymaps -kb planck/ez
```
## `qmk new-keymap`
This command creates a new keymap based on a keyboard's existing default keymap.
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
**Usage**:
```
qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
```
## `qmk clean`
This command cleans up the `.build` folder. If `--all` is passed, any .hex or .bin files present in the `qmk_firmware` directory will also be deleted.
**Usage**:
```
qmk clean [-a]
```
---
# Developer Commands
## `qmk cformat`
This command formats C code using clang-format.
Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
**Usage for specified files**:
```
qmk cformat [file1] [file2] [...] [fileN]
```
**Usage for all core files**:
```
qmk cformat -a
```
**Usage for only changed files against origin/master**:
```
qmk cformat
```
**Usage for only changed files against branch_name**:
```
qmk cformat -b branch_name
```
## `qmk docs`
This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
**Usage**:
```
qmk docs [-p PORT]
```
## `qmk generate-docs`
This command allows you to generate QMK documentation locally. It can be uses for general browsing or improving the docs. External tools such as [serve](https://www.npmjs.com/package/serve) can be used to browse the generated files.
**Usage**:
```
qmk generate-docs
```
## `qmk generate-rgb-breathe-table`
This command generates a lookup table (LUT) header file for the [RGB Lighting](feature_rgblight.md) feature's breathing animation. Place this file in your keyboard or keymap directory as `rgblight_breathe_table.h` to override the default LUT in `quantum/`.
**Usage**:
```
qmk generate-rgb-breathe-table [-q] [-o OUTPUT] [-m MAX] [-c CENTER]
```
## `qmk kle2json`
This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
**Usage**:
```
qmk kle2json [-f] <filename>
```
**Examples**:
```
$ qmk kle2json kle.txt
☒ File info.json already exists, use -f or --force to overwrite.
```
```
$ qmk kle2json -f kle.txt -f
Ψ Wrote out to info.json
```
## `qmk pyformat`
This command formats python code in `qmk_firmware`.
**Usage**:
```
qmk pyformat
```
## `qmk pytest`
This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
**Usage**:
```
qmk pytest
```