qmk_firmware/keyboards/xelus/dawn60/rev1/config.h

144 lines
4.6 KiB
C
Raw Normal View History

2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 20:02:18 +00:00
/* Copyright 2020 Harrison Chan (Xelus)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
// USB Device descriptor parameter
#define VENDOR_ID 0x5845 // XE
#define PRODUCT_ID 0x0060 // Dawn60
#define DEVICE_VER 0x0001
#define MANUFACTURER Xelus
#define PRODUCT Dawn60
// key matrix size
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
//no underglow - prototype
//#define MATRIX_ROW_PINS { B1, B3, B7, F6, F7 }
//#define MATRIX_COL_PINS { B0, D5, B2, F5, D2, D3, D4, D6, D7, B4, B5, B6, C6, C7 }
//#define UNUSED_PINS
//underglow
#define MATRIX_ROW_PINS { B1, B3, F1, F6, F7 }
#define MATRIX_COL_PINS { B0, D5, B2, F5, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
#define UNUSED_PINS
// IS31FL3731 driver
#define DRIVER_COUNT 2
#define DRIVER_LED_TOTAL 64
// COL2ROW or ROW2COL
#define DIODE_DIRECTION COL2ROW
// Set 0 if debouncing isn't needed
#define DEBOUNCE 5
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
#define LOCKING_SUPPORT_ENABLE
// Locking resynchronize hack
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
// disable debug print
//#define NO_DEBUG
// disable print
//#define NO_PRINT
// disable action features
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#define RGB_BACKLIGHT_ENABLED 1
// This conditionally compiles the backlight code for Dawn60 specifics
#define RGB_BACKLIGHT_DAWN60
//RGB Underglow defines
#define RGB_DI_PIN F0
#define WS2812_LED_TOTAL 20
#define RGB_UNDERGLOW_ALPHA_TOP_START 0
#define RGB_UNDERGLOW_ALPHA_TOP_END 6
#define RGB_UNDERGLOW_ALPHA_BOT_START 12
#define RGB_UNDERGLOW_ALPHA_BOT_END 15
// enable/disable LEDs based on layout
// switch between split backspace (1) or normal backspace(0)
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
// switch between Tsangan (1) or Arrows Bottom Row (0)
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
// switch between standard split rshift (0) or arrows r shift (1)
// .------------------. .-------------------.
// | ? | Shift | Fn | vs | Shift | Up | Fn |
// `------------------' `-------------------'
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
//not used
#define RGB_BACKLIGHT_USE_ISO_ENTER 0
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define RGB_BACKLIGHT_BRIGHTNESS 255
// the default effect (RGB test)
#define RGB_BACKLIGHT_EFFECT 255
// the default effect speed (0-3)
#define RGB_BACKLIGHT_EFFECT_SPEED 0
// the default color1 and color2
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
// These define which keys in the matrix are alphas/mods
// Used for backlight effects so colors are different for
// alphas vs. mods
// Each value is for a row, bit 0 is column 0
// Alpha=0 Mod=1
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011111000011111
#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE