mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-02 16:05:09 +00:00
50 lines
1.8 KiB
Markdown
50 lines
1.8 KiB
Markdown
|
# xd002
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.
|
|||
|
|
|
|||
|
|
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
|
|||
|
|
|
|||
|
|
* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
|
|||
|
|
* Hardware Supported: xd002
|
|||
|
|
* Hardware Availability: [kprepublic](https://kprepublic.com/products/xd002-xiudi-2-custom-mechanical-keyboard-2-keys-underglow-and-switch-rgb-pcb-programmed-hot-swappable-macro-key-aluminum-case)
|
|||
|
|
|
|||
|
|
Make example for this keyboard (after setting up your build environment):
|
|||
|
|
|
|||
|
|
make xd002:default
|
|||
|
|
|
|||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|||
|
|
|
|||
|
|
## Flashing
|
|||
|
|
### Prerequisites
|
|||
|
|
|
|||
|
|
```bash
|
|||
|
|
git clone https://github.com/micronucleus/micronucleus.git
|
|||
|
|
cd micronucleus/commandline/
|
|||
|
|
sudo make install
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
|
|||
|
|
|
|||
|
|
```bash
|
|||
|
|
sudo udevadm control --reload-rules
|
|||
|
|
sudo udevadm trigger
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
### Instructions
|
|||
|
|
|
|||
|
|
**Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard.
|
|||
|
|
|
|||
|
|
```bash
|
|||
|
|
make xd002:default:flash
|
|||
|
|
|
|||
|
|
# or directly with...
|
|||
|
|
micronucleus --run <firmware.hex>
|
|||
|
|
```
|
|||
|
|
|
|||
|
|
### Recovery
|
|||
|
|
|
|||
|
|
* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
|
|||
|
|
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|