mirror of
https://github.com/qmk/qmk_firmware.git
synced 2025-01-10 03:29:30 +00:00
29 lines
1.2 KiB
Markdown
29 lines
1.2 KiB
Markdown
|
# NCR80 ALPS SKFL
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
PCB Replace for NCR80 with ALPS SKFL switch.
|
||
|
|
|
||
|
|
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan)
|
||
|
|
* Hardware Supported: NCR80
|
||
|
|
* Hardware Availability: [Github](https://github.com/MaiTheSan/NCR80-ALPS-SKFL)
|
||
|
|
|
||
|
|
Make examples for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make salane/ncr80alpsskfl:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make salane/ncr80alpsskfl:default:flash
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: short 2 pin in the back of pcb and plug the usb in
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|