qmk_firmware/keyboards/ymdk/ymd75/rev1/readme.md

# YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.

* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
* Hardware Supported: rev1 (ATmega32a)
* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>

Make example for this keyboard (after setting up your build environment):

    make ymdk/ymd75/rev1:default

Flashing example for this keyboard:

    make ymdk/ymd75/rev1:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Prepare ymdk/ymd75 for rev4 (#21484) 2023-07-14 03:15:59 +00:00			`# YMD75 / MT84`

			`75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.`

			`This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.`

			`* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)`
			`* Hardware Supported: rev1 (ATmega32a)`
			`* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>`

			`Make example for this keyboard (after setting up your build environment):`

			`make ymdk/ymd75/rev1:default`

Remove references to bootloadHID flashing page in keyboard readmes (#23942) * Remove references to bootloadHID flashing page in keyboard readmes * Remove bootloadHID flashing page 2024-06-17 19:23:45 +00:00			`Flashing example for this keyboard:`
Prepare ymdk/ymd75 for rev4 (#21484) 2023-07-14 03:15:59 +00:00
			`make ymdk/ymd75/rev1:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard.`
			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available