mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-03 16:35:10 +00:00
28 lines
1.3 KiB
Markdown
28 lines
1.3 KiB
Markdown
|
# YMDK YMD62 ISO
|
||
|
|
|
||
|
|
A 60% PCB supporting the ISO layout, with hotswap sockets, backlit keys and underglow.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Richard Dawe](https://github.com/richdawe)
|
||
|
|
* Hardware Supported: YMD62 PCB
|
||
|
|
* Hardware Availability: [YMDK](https://ymdkey.com/products/ymd62-iso-rgb-hot-swap-pcb-fully-programmable-support-via-vial)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make ymdk/ymd62:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make ymdk/ymd62:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Double-tap the reset button on the back of the PCB
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
||
|
|
|
||
|
|
Note: The device does not reconnect automatically after the QMK firmware has been flashed.
|
||
|
|
Wait for the USB device to disappear after writing firmware, then unplug and re-plug it.
|