mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-01 07:25:50 +00:00
45 lines
1.2 KiB
C
45 lines
1.2 KiB
C
|
// Copyright 2023 Andrew Kannan (@awkannan)
|
||
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
|
|
||
|
|
#pragma once
|
||
|
|
|
||
|
|
/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
|
||
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||
|
|
|
||
|
|
/* LSE clock */
|
||
|
|
#define STM32_LSECLK 32768
|
||
|
|
|
||
|
|
#define ENCODER_RESOLUTION 2
|
||
|
|
|
||
|
|
// I2C config
|
||
|
|
#define I2C_DRIVER I2CD1
|
||
|
|
#define I2C1_SCL_PIN B6
|
||
|
|
#define I2C1_SDA_PIN B7
|
||
|
|
#define I2C1_SCL_PAL_MODE 1
|
||
|
|
#define I2C1_SDA_PAL_MODE 1
|
||
|
|
#define I2C1_TIMINGR_PRESC 0x00U
|
||
|
|
#define I2C1_TIMINGR_SCLDEL 0x03U
|
||
|
|
#define I2C1_TIMINGR_SDADEL 0x01U
|
||
|
|
#define I2C1_TIMINGR_SCLH 0x03U
|
||
|
|
#define I2C1_TIMINGR_SCLL 0x09U
|
||
|
|
|
||
|
|
// configure oled driver for the 128x32 oled
|
||
|
|
#define OLED_UPDATE_INTERVAL 66 // ~15fps
|
||
|
|
|
||
|
|
// OLED_TIMEOUT is incompatible with the OLED_OFF mode
|
||
|
|
#define OLED_TIMEOUT 0
|
||
|
|
|
||
|
|
// OLED timeout reimplemented in the keyboard-specific code
|
||
|
|
#define CUSTOM_OLED_TIMEOUT 60000
|
||
|
|
|
||
|
|
// Custom config starts after VIA's EEPROM usage,
|
||
|
|
// dynamic keymaps start after this.
|
||
|
|
// Custom config Usage:
|
||
|
|
// 1 for enabled encoder modes (1 byte)
|
||
|
|
// 1 for OLED default mode (1 byte)
|
||
|
|
// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
|
||
|
|
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 20
|
||
|
|
|
||
|
|
// VIA lighting is handled by the keyboard-level code
|
||
|
|
#define VIA_CUSTOM_LIGHTING_ENABLE
|