mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-05 01:15:19 +00:00
21 lines
1.2 KiB
Markdown
21 lines
1.2 KiB
Markdown
|
# Viper/Eagle REP Rev B
|
||
|
|
||
|
A alternative PCB for Viper and Eagle V2 and V3
|
||
|
|
||
|
* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
|
||
|
* Hardware Supported: Viper/Eagle REP Rev B
|
||
|
|
||
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
||
|
make 4pplet/eagle_viper_rep/rev_b:default
|
||
|
|
||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
||
|
How to enter bootloader (DFU):
|
||
|
* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
|
||
|
|
||
|
* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
|
||
|
|
||
|
Alternative option if the firmware is already pre-flashed:
|
||
|
* Unplug your keyboard, hold down the Esc-key and at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
|