mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-01 23:45:54 +00:00
24 lines
1.4 KiB
Markdown
24 lines
1.4 KiB
Markdown
|
# Let's Split Flashing
|
||
|
|
(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
|
||
|
|
## Make the QMK DFU .hex
|
||
|
|
`make lets_split/rev2:wanleg:production dfu=qmk`
|
||
|
|
|
||
|
|
## Burning EEPROM settings and Firmware
|
||
|
|
Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.
|
||
|
|
**Burn Left Side With QMK DFU and Firmware**
|
||
|
|
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
|
||
|
|
|
||
|
|
**Burn Right Side With QMK DFU and Firmware**
|
||
|
|
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
|
||
|
|
|
||
|
|
Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
|
||
|
|
|
||
|
|
## Using QMK DFU
|
||
|
|
Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
|
||
|
|
`make lets_split/rev2:<keymap>:dfu dfu=qmk`
|
||
|
|
The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`
|
||
|
|
|
||
|
|
---
|
||
|
|
# JJ40
|
||
|
|
## To Do
|
||
|
|
- [ ] Mousekeys not working with Userspace for some reason (jj40 only)
|