qmk_firmware/keyboards/handwired/dactyl_minidox/readme.md

# Dactyl Minidox

![DactylMinidox](https://i.imgur.com/PqjgeRf.jpeg)

A 36 key (3x5+3), split bodied keyboard derived from the [Dactyl ManuForm](/keyboards/handwired/dactyl_manuform/).

* Keyboard Maintainer: [Dan Ford](https://github.com/dlford)
* Hardware Supported: Pro Micro controller, or clone of
* Hardware Availability: [Build Guide](https://www.dlford.io/keyboard-build-guide-per-key-rgb-leds/)

Make example for this keyboard (after setting up your build environment):

    make handwired/dactyl_minidox:default

Flashing example for this keyboard:

    make handwired/dactyl_minidox:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
Rename `dactyl_manuform` variant `3x5_3` (#21015) 2023-07-20 20:03:23 +00:00			`# Dactyl Minidox`

Fixup `handwired/dactyl_minidox` (#24253) * Initial * Fix missing bracket * Fix keymap name * Fix rgb matrix coordinates * Remove unncessary centre point 2024-08-08 03:48:44 +00:00			`![DactylMinidox](https://i.imgur.com/PqjgeRf.jpeg)`
Rename `dactyl_manuform` variant `3x5_3` (#21015) 2023-07-20 20:03:23 +00:00
			`A 36 key (3x5+3), split bodied keyboard derived from the [Dactyl ManuForm](/keyboards/handwired/dactyl_manuform/).`

			`* Keyboard Maintainer: [Dan Ford](https://github.com/dlford)`
			`* Hardware Supported: Pro Micro controller, or clone of`
			`* Hardware Availability: [Build Guide](https://www.dlford.io/keyboard-build-guide-per-key-rgb-leds/)`

			`Make example for this keyboard (after setting up your build environment):`

			`make handwired/dactyl_minidox:default`

			`Flashing example for this keyboard:`

			`make handwired/dactyl_minidox:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available