mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-12-16 06:33:23 +00:00
29 lines
1.2 KiB
Markdown
29 lines
1.2 KiB
Markdown
|
# Gondolindrim X Dark Magnum Ergo 1 PCB QMK firmware
|
||
|
|
||
|
The Magnum Ergo 1 is an Alice-layout ergonomic keyboard designed by Dark, with a PCB designer by Gondolindrim.
|
||
|
|
||
|
* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim)
|
||
|
* Hardware Supported: proprietary PCB using STM32F4x1C microcontroller;
|
||
|
* Availability: as of november 2022 both keyboard and PCB were sold in a private Group Buy; therefore availability is limited.
|
||
|
|
||
|
## How to flash
|
||
|
|
||
|
### Enter bootloader
|
||
|
|
||
|
The DFU state in the bootloader can be accessed in 3 ways:
|
||
|
|
||
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key, grave accent in the default keymap) and plug in the keyboard;
|
||
|
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds;
|
||
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT`; in the default layout, that is top left key ('grave') in layer 1.
|
||
|
|
||
|
### How to compile and flash
|
||
|
|
||
|
You can compile the Iron 165R2 default keymap by using the following:
|
||
|
|
||
|
make magnum_ergo_1:default
|
||
|
|
||
|
And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
|
||
|
|
||
|
make magnum_ergo_1:default:flash
|
||
|
|