qmk_firmware/keyboards/ms_sculpt/readme.md

# ms_sculpt

![ms_sculpt_with_cold_dry_joints](https://user-images.githubusercontent.com/105235786/168012266-4e235bf5-8d34-4731-ab17-2308a9d9a29e.jpg)

MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill

* Keyboard Maintainer: [Jean Bernard](https://github.com/jn-bernard)
* Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
* Hardware Availability: Ebay

Make example for this keyboard (after setting up your build environment):

    make ms_sculpt:default

Flashing example for this keyboard:

    make ms_sculpt:default:flash

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Added MS Sculpt ISO-layout conversion with STM32F401 (#17049) 2022-07-02 12:16:38 +00:00			`# ms_sculpt`

			`![ms_sculpt_with_cold_dry_joints](https://user-images.githubusercontent.com/105235786/168012266-4e235bf5-8d34-4731-ab17-2308a9d9a29e.jpg)`

			`MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill`

			`* Keyboard Maintainer: [Jean Bernard](https://github.com/jn-bernard)`
			`* Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401`
			`* Hardware Availability: Ebay`

			`Make example for this keyboard (after setting up your build environment):`

			`make ms_sculpt:default`

			`Flashing example for this keyboard:`

			`make ms_sculpt:default:flash`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
			* Keycode in layout: Press the key mapped to `RESET` if it is available
MS Sculpt Touch-Up (#17871) * info.json: fix JSON syntax error * info.json: convert tabs to spaces * info.json: add QMK Configurator layout data * readme.md: switch Bootloader and Docs sections 2022-08-01 16:09:40 +00:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`