#define FORCE_NKRO // NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
// #define STRICT_LAYER_RELEASE // Force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases)
// #define LOCKING_SUPPORT_ENABLE // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
// #define LOCKING_RESYNC_ENABLE // Tries to keep switch state consistent with keyboard LED state
#define TAPPING_TERM 200 // How long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
// #define TAPPING_TERM_PER_KEY // Enables handling for per key TAPPING_TERM settings
// #define RETRO_TAPPING // Tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release
// #define TAPPING_TOGGLE 2 // How many taps before triggering the toggle
// #define PERMISSIVE_HOLD // Makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the TAPPING_TERM. See Permissive Hold for details
// #define IGNORE_MOD_TAP_INTERRUPT // Makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the TAPPING_TERM for both keys. See Mod tap interrupt for details
// #define TAPPING_FORCE_HOLD // Makes it possible to use a dual role key as modifier shortly after having been tapped. See Hold after tap. Breaks any Tap Toggle functionality (TT or the One Shot Tap Toggle)
// #define LEADER_TIMEOUT 300 // How long before the leader key times out. If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the LEADER_PER_KEY_TIMING option, which resets the timeout after each key is tapped.
// #define LEADER_PER_KEY_TIMING // Sets the timer for leader key chords to run on each key press rather than overall
// #define LEADER_KEY_STRICT_KEY_PROCESSING // Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify MT(MOD_CTL, KC_A) if you want to use KC_A.
// #define ONESHOT_TIMEOUT 300 // How long before oneshot times out
// #define ONESHOT_TAP_TOGGLE 2 // How many taps before oneshot toggle is triggered
// #define COMBO_COUNT 2 // Set this to the number of combos that you're using in the Combo feature.
// #define COMBO_TERM 200 // How long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined.
// #define TAP_CODE_DELAY 100 // Sets the delay between register_code and unregister_code, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
// #define TAP_HOLD_CAPS_DELAY 80 // Sets the delay for Tap Hold keys (LT, MT) when using KC_CAPSLOCK keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher.
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_ALPHAS_MODS // Sets the default mode, if none has been set
// #define RGBLIGHT_HUE_STEP 12 // Units to step when in/decreasing hue
// #define RGBLIGHT_SAT_STEP 25 // Units to step when in/decreasing saturation
// #define RGBLIGHT_VAL_STEP 12 // Units to step when in/decreasing value (brightness)
// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
// #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
// #define RGBLIGHT_ANIMATIONS // Run RGB animations
// #define RGBLIGHT_ANIMATIONS // Enable all additional animation modes.
