mirror of
https://github.com/qmk/qmk_firmware.git
synced 2024-11-25 12:46:41 +00:00
35 lines
1.3 KiB
Markdown
35 lines
1.3 KiB
Markdown
|
# snatchpad
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
A 6-key macropad with 2 rotary encoders intended for use as a pointing device.
|
||
|
|
|
||
|
|
In addition to the 3d printed parts and microcontroller, the following hardware is required:
|
||
|
|
* 4 * 3x3 mm threaded inserts
|
||
|
|
* 4 * 4mm M3 bolt
|
||
|
|
* USB daughter board
|
||
|
|
|
||
|
|
---
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [xia0](https://github.com/xia0)
|
||
|
|
* Hardware Supported: e.g. Arduino Pro Micro
|
||
|
|
* Hardware Availability: [github](https://github.com/xia0/keeb_files/tree/main/snatchpad)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make handwired/snatchpad:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make handwired/snatchpad:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|